Withdrawn and superseded ISO standards — page 48 of 246

56472,IS,,ISO 15015:2011,"Plastics — Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) — Requirements and test methods","Plastiques — Plaques extrudées en copolymères d'acrylonitrile-styrène modifiés choc (ABS, AEPDS ou ASA) — Exigences et méthodes d'essai",2011-03-29,2,['83.140.10'],ISO/TC 61/SC 11,9599,[43224],[91000],"['en','fr','ru']",11,"<p>ISO 15015:2011 specifies the requirements and test methods for solid flat extruded sheets of impact-modified acrylonitrile-styrene copolymer materials: acrylonitrile-butadiene-styrene (ABS), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) (commonly known as AES) and acrylonitrile-styrene-acrylate (ASA),

26214,IS,,ISO 15016:2002,Ships and marine technology — Guidelines for the assessment of speed and power performance by analysis of speed trial data,Navires et technologie maritime — Lignes directrices pour l'évaluation des performances de vitesse et de puissance par analyse des données d'essais de vitesse,2002-06-20,1,['47.020.01'],ISO/TC 8/SC 6,9599,,[61902],['en'],45,"<p>This International Standard specifies the procedure to be applied in analysing the results of speed trials for ships, with reference to the effects which may have an influence upon the speed-power-revolutions relationship.</p><p>The applicability of the International Standard is limited to commercial ships of the displacem

61902,IS,,ISO 15016:2015,Ships and marine technology — Guidelines for the assessment of speed and power performance by analysis of speed trial data,Navires et technologie maritime — Lignes directrices pour l'évaluation des performances de vitesse et de puissance par analyse des données d'essais de vitesse,2015-03-31,2,['47.020.01'],ISO/TC 8/SC 6,9599,[26214],[82080],['en'],85,"<p>The primary purpose of speed and power trials is to determine a ship's performance in terms of ship's speed, power and propeller shaft speed under prescribed ship's conditions and thereby verify the satisfactory attainment of a ship's speed stipulated by EEDI regulations and/or contract.</p><p>ISO 15016:2015 defines

6091,IS,,ISO 1502:1978,ISO general purpose metric screw threads — Gauging,Filetages métriques ISO pour usages généraux — Vérification par calibres à limites,1978-07-01,1,"['21.040.10','17.040.30']",ISO/TC 1,9599,,[6092],"['en','fr']",22,

25579,IS,,ISO 15023-1:2001,Plastics — Poly(vinyl alcohol) (PVAL) materials — Part 1: Designation system and basis for specifications,Plastiques — Matériaux en poly(alcool de vinyle) (PVAL) — Partie 1: Système de désignation et base de spécifications,2001-11-22,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[65482],"['en','fr']",6,

25580,IS,,ISO 15023-2:2003,Plastics — Poly(vinyl alcohol) (PVAL) materials — Part 2: Determination of properties,Plastiques — Matériaux en poly(alcool de vinyle) (PVAL) — Partie 2: Détermination des propriétés,2003-04-15,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[70420],"['en','fr']",17,"<p>ISO 15023-2:2003 specifies the methods to be used in determining the properties of poly(vinyl alcohol), which is normally prepared by hydrolysis of poly(vinyl acetate) and whose composition comprises vinyl alcohol monomeric units and vinyl acetate monomeric units. It is applicable to poly(vinyl alcohol) with a vinyl alcohol unit content (degree of hydrolysis) from 70 mol % to 100 mol %.</p><p>In addition to th

25581,IS,,ISO 15024:2001,"Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials","Composites plastiques renforcés de fibres — Détermination de la ténacité à la rupture interlaminaire en mode I, GIC, de matériaux composites à matrice polymère renforcés de fibres unidirectionnelles",2001-12-06,1,['83.120'],ISO/TC 61/SC 13,9599,,[84263],"['en','fr']",24,"<p><b>1.1 </b>This International Standard specifies a method for the determination of mode I interlaminar fracture</p><p>toughness (critical energy release rate), <i>G</i>IC, of unidirectional fibre-reinforced plastic composites using a double</p><p>cantilev

26233,IS,,ISO 15025:2000,Protective clothing — Protection against heat and flame — Method of test for limited flame spread,Vêtements de protection — Protection contre la chaleur et les flammes — Méthode d'essai pour la propagation de flamme limitée,2000-04-27,1,['13.340.10'],ISO/TC 94/SC 13,9599,,[61739],"['en','fr']",16,

26247,IS,,ISO 15027-1:2002,"Immersion suits — Part 1: Constant wear suits, requirements including safety","Combinaisons de protection thermique en cas d'immersion — Partie 1: Combinaisons de port permanent, exigences y compris la sécurité",2002-03-28,1,['13.340.10'],ISO/TC 188,9599,,[52164],"['en','fr']",16,

52164,IS,,ISO 15027-1:2012,"Immersion suits — Part 1: Constant wear suits, requirements including safety","Combinaisons de protection thermique en cas d'immersion — Partie 1: Combinaisons de port permanent, exigences, y compris la sécurité",2012-11-05,2,['13.340.10'],ISO/TC 188/SC 1,9599,[26247],[78057],"['en','fr']",18,"<p>ISO 15027-1:2012 specifies performance and safety requirements for constant wear immersion suits for work and leisure activities to protect the body of a user against the effects of cold water immersion, such as cold shock and hypothermia.</p><p>It is applicable for dry and wet constant wear immersion suits.</p><p>Abandonment suits are not covered by ISO 15027-1:2012. Req

28888,IS,,ISO 15027-2:2002,"Immersion suits — Part 2: Abandonment suits, requirements including safety","Combinaisons de protection thermique en cas d'immersion — Partie 2: Combinaisons d'abandon, exigences y compris la sécurité",2002-03-28,1,['13.340.10'],ISO/TC 188,9599,,[52165],"['en','fr']",13,

52165,IS,,ISO 15027-2:2012,"Immersion suits — Part 2: Abandonment suits, requirements including safety","Combinaisons de protection thermique en cas d'immersion — Partie 2: Combinaisons d'abandon, exigences, y compris la sécurité",2012-11-05,2,['13.340.10'],ISO/TC 188/SC 1,9599,[28888],[78058],"['en','fr']",20,"<p>ISO 15027-2:2012 specifies performance and safety requirements for abandonment suits in emergency situations in work and leisure activities to protect the body of a user against the effects of cold water immersion, such as cold shock and hypothermia, including head, hand and feet protection.</p><p>It is applicable for dry and wet abandonment suits.</p><p>Constant wear suits are not

28889,IS,,ISO 15027-3:2002,Immersion suits — Part 3: Test methods,Combinaisons de protection thermique en cas d'immersion — Partie 3: Méthodes d'essai,2002-04-11,1,['13.340.10'],ISO/TC 188,9599,,[52166],"['en','fr']",18,

52166,IS,,ISO 15027-3:2012,Immersion suits — Part 3: Test methods,Combinaisons de protection thermique en cas d'immersion — Partie 3: Méthodes d'essai,2012-11-05,2,['13.340.10'],ISO/TC 188/SC 1,9599,[28889],[78059],"['en','fr']",18,"<p>ISO 15027-3:2012 specifies the test methods for constant wear suits, including helicopter transit suits, and abandonment suits.</p><p>Requirements for constant wear suits are given in ISO 15027-1:2012 and requirements for abandonment suits are given in ISO 15027-2:2012.</p>"

37362,IS,,ISO 15028:2004,Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of hydrolysable chlorine,Plastiques — Isocyanates aromatiques pour utilisation dans la production de polyuréthannes — Détermination du chlore hydrolysable,2004-07-13,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[63436],['en'],4,"<p>ISO 15028:2004 specifies a method for the determination of the hydrolysable-chlorine content of toluene-2,4-diisocyanate, toluene-2,6-diisocyanate or mixtures of the two. This test method may also be applied to other isocyanates of suitable solubility, such as crude or refined polymeric isocyanates.</p>"

6093,IS,,ISO 1503:1977,Geometrical orientation and directions of movements,Orientation géométrique et sens de mouvement,1977-08-01,1,['13.180'],ISO/TC 159/SC 4,9599,,"[40302,24787]","['en','fr']",33,<p>Establishes and defines directional terms in stationary cirmumstances. Is a fundamental document to be used when drawing up other documents where the quantities concerned plays a rule.</p>

29105,IS,,ISO 15031-1:2001,Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 1: General information,Véhicules routiers — Communications entre un véhicule et un équipement externe pour le diagnostic relatif aux émissions — Partie 1: Informations générales,2001-10-11,1,"['13.040.50','43.040.10']",ISO/TC 22,9599,,[51828],"['en','fr']",3,

29021,IS,,ISO 15031-3:2004,"Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 3: Diagnostic connector and related electrical circuits, specification and use",Véhicules routiers — Communications entre un véhicule et un équipement externe pour le diagnostic relatif aux émissions — Partie 3: Connecteur de diagnostic et circuits électriques associés: spécifications et utilisation,2004-07-16,1,"['13.040.50','43.040.10','43.180']",ISO/TC 22/SC 31,9599,,[64636],"['en','fr']",20,"<p>ISO 15031-3:2004 specifies a minimum set of requirements for a diagnostic connector used in communication between vehicle and external test equipment for emissi

64636,IS,,ISO 15031-3:2016,Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 3: Diagnostic connector and related electrical circuits: Specification and use,Véhicules routiers — Communications entre un véhicule et un équipement externe pour le diagnostic relatif aux émissions — Partie 3: Connecteur de diagnostic et circuits électriques associés: spécifications et utilisation,2016-04-06,2,"['13.040.50','43.040.10','43.180']",ISO/TC 22/SC 31,9599,[29021],[84210],['en'],5,"<p>ISO 15031-3:2016 references the latest publication of SAE J1962.</p><p>On-board diagnostic (OBD) regulations require road vehicles to be equipped with a standardiz

40087,IS,,ISO 15031-4:2005,Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 4: External test equipment,Véhicules routiers — Communications entre un véhicule et un équipement externe pour le diagnostic relatif aux émissions — Partie 4: Équipement d'essai externe,2005-06-15,1,"['13.040.50','43.180']",ISO/TC 22,9599,,[55047],['en'],34,"<p>ISO 15031-4:2005 specifies:</p><ul><li>a means of establishing communications between an OBD-equipped vehicle and external test equipment,</li><li>a set of diagnostic services to be provided by the external test equipment in order to exercise the services defined in ISO 15031-5,</li><li>conformance c

29108,IS,,ISO 15031-5:2006,Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 5: Emissions-related diagnostic services,Véhicules routiers — Communications entre un véhicule et un équipement externe pour le diagnostic relatif aux émissions — Partie 5: Services de diagnostic relatif aux émissions,2006-01-09,1,"['13.040.50','43.040.10']",ISO/TC 22,9599,,[50816],['en'],185,"<p>ISO 15031-5:2006 specifies diagnostic services and functionally addressed request/response messages required to be supported by motor vehicles and external test equipment for diagnostic purposes which pertain to motor vehicle emission-related data. Any external tes

50816,IS,,ISO 15031-5:2011,Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 5: Emissions-related diagnostic services,Véhicules routiers — Communications entre un véhicule et un équipement externe pour le diagnostic relatif aux émissions — Partie 5: Services de diagnostic relatif aux émissions,2011-04-12,2,"['13.040.50','43.040.10']",ISO/TC 22/SC 31,9599,[29108],[66368],['en'],129,"<p>ISO 15031-5:2011 is intended to satisfy the data reporting requirements of On-Board Diagnostic (OBD) regulations in the United States and Europe, and any other region that may adopt similar requirements in the future. ISO 15031-5:2011 specifies: </p><p

29109,IS,,ISO 15031-6:2005,Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 6: Diagnostic trouble code definitions,Véhicules routiers — Communications entre un véhicule et un équipement externe pour le diagnostic relatif aux émissions — Partie 6: Définition des codes d'anomalie de diagnostic,2005-11-22,1,"['13.040.50','43.040.10']",ISO/TC 22,9599,,[50817],['en'],129,"<p>ISO 15031-6:2005 provides recommended uniformity for alphanumeric trouble codes. It further provides guidance for uniform messages associated with these codes.</p><p>ISO 15031-6:2005 specifies several sections addressing format, structure, messages, and a few exampl

50817,IS,,ISO 15031-6:2010,Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 6: Diagnostic trouble code definitions,Véhicules routiers — Communications entre un véhicule et un équipement externe concernant le diagnostic relatif aux émissions — Partie 6: Définition des codes d'anomalie de diagnostic,2010-08-13,2,"['13.040.50','43.040.10']",ISO/TC 22/SC 31,9599,[29109],[66369],['en'],13,"<p>ISO 15031-6:2010 provides uniformity for standardized Diagnostic Trouble Codes (DTC) that electrical/electronic On-Board Diagnostic (OBD) systems of motor vehicles are required to report when malfunctions are detected. It also provides guidance for

29110,IS,,ISO 15031-7:2001,Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 7: Data link security,Véhicules routiers — Communications entre un véhicule et un équipement externe pour le diagnostic relatif aux émissions — Partie 7: Sécurité de la liaison de données,2001-03-15,1,"['13.040.50','43.040.10']",ISO/TC 22,9599,,[62489],"['en','fr']",3,

26269,IS,,ISO 15033:2000,Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC,Plastiques — Détermination du caprolactame et de ses oligomères cycliques et linéaires par CLHP,2000-04-13,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[40095],"['en','fr']",14,

40095,IS,,ISO 15033:2007,Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC,Plastiques — Détermination du caprolactame et de ses oligomères cycliques et linéaires par CLHP,2007-03-06,2,['83.080.01'],ISO/TC 61/SC 5,9599,[26269],[70036],['en'],11,"<p>ISO 15033:2007 describes an HPLC (high-performance liquid chromatography) method for determining the concentrations of cyclic oligomers of caprolactam, from 0,01 % by mass upwards, and linear oligomers of caprolactam, from 5 mg/kg upwards, both up to and including the hexamer of caprolactam (<i>n </i>= 6), in samples of polyamide 6, caprolactam and mixtures of rearrangement products in water.</p>"

25826,IS,,ISO 15037-1:1998,Road vehicles — Vehicle dynamics test methods — Part 1: General conditions for passenger cars,Véhicules routiers — Méthodes d'essai de la dynamique des véhicules — Partie 1: Conditions générales pour voitures particulières,1998-12-03,1,['43.100'],ISO/TC 22,9599,,[38887],"['en','fr']",12,

34901,IS,Cor,ISO 15037-1:1998/Cor 1:2001,Road vehicles — Vehicle dynamics test methods — Part 1: General conditions for passenger cars — Technical Corrigendum 1,Véhicules routiers — Méthodes d'essai de la dynamique des véhicules — Partie 1: Conditions générales pour voitures particulières — Rectificatif technique 1,2001-02-22,1,['43.100'],ISO/TC 22,9599,,[38887],['en'],1,

38887,IS,,ISO 15037-1:2006,Road vehicles — Vehicle dynamics test methods — Part 1: General conditions for passenger cars,Véhicules routiers — Méthodes d'essai de la dynamique des véhicules — Partie 1: Conditions générales pour voitures particulières,2006-08-22,2,['43.100'],ISO/TC 22/SC 33,9599,"[34901,25826]",[70164],"['en','fr']",18,"<p>ISO 15037-1:2006 specifies the general conditions that apply when vehicle dynamics properties are determined according to ISO test methods.</p><p>In particular, it specifies general conditions for:</p><ul><li>variables,</li><li>measuring equipment and data processing,</li><li>environment (test track and wind velocity),</li><li>test vehicle preparation (tunin

54065,IS,,ISO 15042:2011,Multiple split-system air-conditioners and air-to-air heat pumps — Testing and rating for performance,Climatiseurs et pompes à chaleur air/air multi-split — Essais et détermination des caractéristiques de performance,2011-10-31,1,"['23.120','27.080']",ISO/TC 86/SC 6,9599,,[63408],"['en','fr']",94,"<p>ISO 15042:2011 establishes performance testing and rating criteria for factory-made residential, commercial and industrial, electrically-driven, mechanical-compression, air-cooled air-conditioners and air-to-air heat pumps, described as basic multi-split systems, modular multi-split systems and modular heat recovery multi-split systems. These multi-split systems include

6094,IS,,ISO 1505:1982,Textile machinery and allied machinery and accessories — Dyeing and finishing equipment — Working widths and nominal widths,Matériel pour l'industrie textile et matériel connexe — Matériels de teinture et d'apprêt — Largeurs de travail et largeurs nominales,1982-06-01,1,['59.120.50'],ISO/TC 72/SC 4,9599,,[6095],"['en','fr']",2,

37363,IS,,ISO 15063:2004,Plastics — Polyols for use in the production of polyurethanes — Determination of hydroxyl number by NIR spectroscopy,Plastiques — Polyols pour la production de polyuréthannes — Détermination de l'indice d'hydroxyle par spectroscopie dans le proche infrarouge,2004-08-26,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[52878],"['en','fr']",22,"<p>ISO 15063:2004 establishes guidelines for the determination of hydroxyl numbers of polyols using NIR (near infrared) spectroscopy. Definitions and calibration techniques are given. Procedures for selecting calibration materials and for collecting and treating data to develop NIR calibrations are outlined. Criteria for building, evaluati

37364,IS,,ISO 15064:2004,Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of the isomer ratio in toluenediisocyanate,Plastiques — Isocyanates aromatiques pour utilisation dans la production de polyuréthannes — Détermination du rapport des isomères dans le diisocyanate de toluène,2004-08-09,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[56868],['en'],10,"<p>ISO 15064:2004 specifies methods for the measurement of toluene-2,6-diisocyanate in mixtures of the 2,4- and 2,6-isomers. Two methods based on infrared spectroscopy are required to give accurate results over a broad range of isomer concentrations. Method A is applicable to TDI samples containing 5 % to 95

56868,IS,,ISO 15064:2010,Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of the isomer ratio in toluenediisocyanate,Plastiques — Isocyanates aromatiques pour utilisation dans la production de polyuréthannes — Détermination du rapport des isomères dans le diisocyanate de toluène,2010-11-24,2,['83.080.10'],ISO/TC 61/SC 12,9599,[37364],[70269],['en'],10,"<p>ISO 15064:2010 specifies methods for the measurement of toluene-2,6‑diisocyanate in mixtures of the 2,4- and 2,6‑isomers. Two methods based on infrared spectroscopy are required to give accurate results over a broad range of isomer concentrations. Method A is applicable to TDI samples containing 5 %

26373,IS,,ISO 15071:1999,Hexagon bolts with flange — Small series — Product grade A,Vis à tête hexagonale à embase cylindro-tronconique — Série étroite — Grade A,1999-03-25,1,['21.060.10'],ISO/TC 2/SC 11,9599,,[56462],"['en','fr']",9,

45013,IS,Cor,ISO 15071:1999/Cor 1:2006,Hexagon bolts with flange — Small series — Product grade A — Technical Corrigendum 1,Vis à tête hexagonale à embase cylindro-tronconique — Série étroite — Grade A — Rectificatif technique 1,2006-12-14,1,['21.060.10'],ISO/TC 2,9599,,[56462],"['en','fr']",1,

26374,IS,,ISO 15072:1999,Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A,"Vis à tête hexagonale à embase cylindro-tronconique, à filetage métrique à pas fin — Série étroite — Grade A",1999-12-16,1,['21.060.10'],ISO/TC 2/SC 11,9599,,[60816],"['en','fr']",9,

45014,IS,Cor,ISO 15072:1999/Cor 1:2006,Hexagon bolts with flange with metric fine pitch thread — Small series — Product grade A — Technical Corrigendum 1,"Vis à tête hexagonale à embase cylindro-tronconique, à filetage métrique à pas fin — Série étroite — Grade A — Rectificatif technique 1",2006-12-14,1,['21.060.10'],ISO/TC 2/SC 11,9599,,[60816],"['en','fr']",1,

40317,IS,,ISO 15076-1:2005,"Image technology colour management — Architecture, profile format and data structure — Part 1: Based on ICC.1:2004-10","Gestion de couleur en technologie d'image — Architecture, format de profil et structure de données — Partie 1: Sur la base de l'ICC.1:2004-10",2005-11-24,1,['37.100.99'],ISO/TC 130,9599,,[54754],['en'],97,<p>ISO 15076-1:2005 specifies a colour profile format and describes the architecture within which it can operate. This supports the exchange of information which specifies the intended colour image processing of digital data. Specification of the required reference colour spaces and the data structures (tags) are included.</p>

54754,IS,,ISO 15076-1:2010,"Image technology colour management — Architecture, profile format and data structure — Part 1: Based on ICC.1:2010","Gestion de couleur en technologie d'image — Architecture, format de profil et structure de données — Partie 1: Fondé sur l'ICC.1:2010",2010-11-26,2,['37.100.99'],ISO/TC 130,9599,[40317],[86740],['en'],113,<p>ISO 15076-1:2010 specifies a colour profile format and describes the architecture within which it can operate. This architecture supports the exchange of information which specifies the intended colour image processing of digital data. The required reference colour spaces and the data structures (tags) are also specified.</p>

42812,IS,,ISO 15077:2008,"Tractors and self-propelled machinery for agriculture — Operator controls — Actuating forces, displacement, location and method of operation","Tracteurs et machines agricoles automotrices — Commandes de l'opérateur — Forces de manoeuvre, déplacements, emplacements et modes de fonctionnement",2008-01-21,1,['65.060.01'],ISO/TC 23/SC 3,9599,[36685],[72943],"['en','fr']",14,"<p>ISO 15077:2008 specifies the preferred method of operation and requirements related to operator controls actuated by hand and foot, installed in agricultural tractors and self‑propelled agricultural machinery and used by a seated operator as intended and under the conditions foreseen by the manuf

40489,IS,,ISO 15081:2005,Agricultural irrigation equipment — Graphical symbols for pressurized irrigation systems,Matériel agricole d'irrigation — Symboles graphiques des systèmes d'irrigation sous pression,2005-06-13,1,"['01.080.30','65.060.35']",ISO/TC 23/SC 18,9599,,[53636],['en'],9,<p>ISO 15081:2005 establishes conventional basic graphical symbols for use on drawings and diagrams concerning the installation of pressurized agricultural irrigation systems.</p>

26398,IS,,ISO 15082:1999,Road vehicles — Tests for rigid plastic safety glazing materials,Véhicules routiers — Essais pour les vitrages de sécurité rigides en matières plastiques,1999-08-05,1,"['83.140.01','43.040.65']",ISO/TC 22/SC 35,9599,,"[68489,57637]","['en','fr']",18,

26406,IS,,ISO 15083:2003,Small craft - Bilge-pumping systems,Petits navires - Systèmes de pompes de cale,2003-02-03,1,['47.080'],ISO/TC 188,9599,,[72972],"['en','fr']",8,<p>ISO 15083:2003 specifies requirements for pumping or alternative means designed to remove normal accumulations of bilge water for small craft with a hull length up to 24 m according to ISO 8666.</p><p>ISO 15083:2003 does not set requirements for bilge pumps or bilge-pumping systems designed for damage control.</p>

26408,IS,,ISO 15085:2003,Small craft — Man-overboard prevention and recovery,Petits navires — Prévention des chutes d'homme à la mer et remontée à bord,2003-03-13,1,['47.080'],ISO/TC 188,9599,,"[69542,78010,64510]","['en','fr']",21,"<p>ISO 15085:2003 specifies the design as well as the construction and strength requirements for safety devices and arrangements intended to minimize the risk of falling overboard, and requirements to facilitate reboarding.</p><p>It describes means which can be used individually or combined to achieve these objectives, and applies to small craft of up to 24 m length of hull.</p><p>ISO 15085:2003 is not applicable to the following boat types:</p><ul><li>aquatic to

43905,IS,Amd,ISO 15085:2003/Amd 1:2009,Small craft — Man-overboard prevention and recovery — Amendment 1,Petits navires — Prévention des chutes d'homme à la mer et remontée à bord — Amendement 1,2009-05-07,1,['47.080'],ISO/TC 188,9599,,"[69542,69543,78010,64510]","['en','fr']",2,

69543,IS,Amd,ISO 15085:2003/Amd 2:2017,Small craft — Man-overboard prevention and recovery — Amendment 2,Petits navires — Prévention des chutes d'homme à la mer et remontée à bord — Amendement 2,2017-12-07,1,['47.080'],ISO/TC 188,9599,[43905],[78010],"['en','fr']",5,

26409,IS,,ISO 15086-2:2000,Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 2: Measurement of the speed of sound in a fluid in a pipe,Transmissions hydrauliques — Évaluation des caractéristiques du bruit liquidien des composants et systèmes — Partie 2: Mesurage de la vitesse du son émis dans un fluide dans une tuyauterie,2000-02-10,1,"['23.100.01','17.140.20']",ISO/TC 131/SC 8,9599,,[86111],"['en','fr']",27,

41577,IS,,ISO 15086-3:2008,Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 3: Measurement of hydraulic impedance,Transmissions hydrauliques — Évaluation des caractéristiques du bruit liquidien des composants et systèmes — Partie 3: Mesurage de l'impédance hydraulique,2008-12-11,1,"['23.100.01','17.140.20']",ISO/TC 131/SC 8,9599,,"[54577,71887]","['en','fr']",24,"<p>ISO 15086-3:2008 describes the procedure for the determination of the impedance characteristics of hydraulic components, by means of measurements from pressure transducers mounted in a pipe.</p><p>ISO 15086-3:2008 is applicable to passive components, irrespective of s

25927,IS,,ISO 15087-1:1999,Dental elevators — Part 1: General requirements,Élévateurs dentaires — Partie 1: Exigences générales,1999-11-04,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[85204],"['en','fr']",11,

25928,IS,,ISO 15087-2:2000,Dental elevators — Part 2: Warwick James elevators,Élévateurs dentaires — Partie 2: Élévateurs Warwick James,2000-05-04,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[85204],"['en','fr']",4,

25929,IS,,ISO 15087-3:2000,Dental elevators — Part 3: Cryer elevators,Élévateurs dentaires — Partie 3: Élévateurs Cryer,2000-05-04,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[85204],"['en','fr']",3,

25930,IS,,ISO 15087-4:2000,Dental elevators — Part 4: Coupland elevators,Élévateurs dentaires — Partie 4: Élévateurs Coupland,2000-05-04,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[85204],"['en','fr']",3,

25931,IS,,ISO 15087-5:2000,Dental elevators — Part 5: Bein elevators,Élévateurs dentaires — Partie 5: Élévateurs Bein,2000-05-04,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[85204],"['en','fr']",3,

25932,IS,,ISO 15087-6:2000,Dental elevators — Part 6: Flohr elevators,Élévateurs dentaires — Partie 6: Élévateurs Flohr,2000-05-04,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[85204],"['en','fr']",3,

6097,IS,,ISO 1509:1973,General purpose push-pull three-pole circuit-breakers for aircraft — Performance requirements,Disjoncteurs tripolaires à bouton-poussoir d'usage courant utilisés à bord des aéronefs — Caractéristiques,1973-11-01,1,['49.060'],ISO/TC 20/SC 1,9599,,"[83798,33490,82785]","['en','fr']",9,"<p>Gives the requirements for circuit breakers having an inverse time/current characteristic, of normal ratings up to and including 35 A, for use in nominal 115/200 V three-phase 4OO Hz a. c. circuits. Includes definitions, design requirements, requirements for dimensions, construction, voltage and current ratings, environment, time/current characteristics, making and breaking capacity, en

55330,IS,,ISO 15091:2012,Paints and varnishes — Determination of electrical conductivity and resistance,Peintures et vernis — Détermination de la conductivité et de la résistance électriques,2012-11-30,1,['87.040'],ISO/TC 35/SC 9,9599,,[78565],"['en','fr']",11,"<p>ISO 15091:2012 specifies a method for determining the electrical conductivity and the electrical resistance of coating materials. The conductivity is usually measured for water-borne paints and varnishes, including electrodeposition coating materials, and the resistance is usually measured for solvent-borne paints and varnishes. If required, the resistivity of the coating material is calculated from either of these measurements. Th

43422,IS,,ISO 15093:2008,"Jewellery — Determination of precious metals in 999 0/00 gold, platinum and palladium jewellery alloys — Difference method using inductively coupled plasma optical emission spectroscopy (ICP-OES)","Joaillerie, bijouterie — Dosage des métaux précieux dans les alliages d'or, de platine et de palladium 999 0/00 pour la joaillerie, bijouterie — Méthode de la différence utilisant la spectrométrie d'émission à plasma induit par haute fréquence (ICP-OES)",2008-08-07,1,['39.060'],ISO/TC 174,9599,,[57654],"['en','fr']",7,"<p>ISO 15093:2008 specifies an analytical procedure for the determination of either platinum in platinum jewellery alloys, gold in gold jewellery alloys or

57654,IS,,ISO 15093:2015,"Jewellery — Determination of precious metals in 999 0/00 gold, platinum and palladium jewellery alloys — Difference method using ICP-OES","Joaillerie, bijouterie — Dosage des métaux précieux dans les alliages d'or, de platine et de palladium 999 0/00 pour la joaillerie, bijouterie — Méthode de la différence utilisant l'ICP-OES",2015-01-28,2,['39.060'],ISO/TC 174,9599,[43422],[75282],"['en','fr']",7,"<p>ISO 15093:2015 specifies an analytical procedure for the determination of either platinum in platinum jewellery alloys, gold in gold jewellery alloys, or palladium in palladium jewellery alloys, with a nominal content of each precious metal of 999 ? (parts per thousan

43421,IS,,ISO 15096:2008,Jewellery — Determination of silver in 999 0/00 silver jewellery alloys — Difference method using inductively coupled plasma optical emission spectroscopy (ICP-OES),"Joaillerie, bijouterie — Dosage de l'argent dans les alliages d'argent 999 0/00 pour la joaillerie, bijouterie — Méthode de la différence utilisant la spectrométrie d'émission à plasma induit par haute fréquence (ICP-OES)",2008-08-07,1,['39.060'],ISO/TC 174,9599,,[57655],"['en','fr']",6,"<p>ISO 15096:2008 specifies the analytical procedure for the determination of silver in silver jewellery alloys, with a nominal content of 999 ‰ (parts per thousand), by measuring specific elements listed in Table A.1.</

57655,IS,,ISO 15096:2014,Jewellery — Determination of silver in 999 0/00 silver jewellery alloys — Difference method using ICP-OES,"Joaillerie, bijouterie — Dosage de l'argent dans de l'argent 999 0/00 — Méthode de la différence utilisant ICP OES",2014-12-09,2,['39.060'],ISO/TC 174,9599,[43421],[75283],"['en','fr']",6,<p>ISO 15096:2014 specifies the analytical procedure for the determination of silver with a nominal content of at least 999 ? (parts per thousand) by measuring specific elements listed in Table A.1.</p><p>This International Standard specifies a method intended to be used as the recommended method for the determination of fineness in 999 ? silver alloys covered by ISO 9202.</p>

25937,IS,,ISO 15098-1:1999,Dental tweezers — Part 1: General requirements,Précelles dentaires — Partie 1: Exigences générales,1999-10-21,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[73463],"['en','fr']",7,

26422,IS,,ISO 15098-2:2000,Dental tweezers — Part 2: Meriam types,Précelles dentaires — Partie 2: Type Meriam,2000-02-17,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[73463],"['en','fr']",4,

73463,IS,,ISO 15098:2020,Dentistry — Dental tweezers,Médecine bucco-dentaire — Précelles dentaires,2020-02-28,1,['11.060.20'],ISO/TC 106/SC 4,9599,"[26422,26423,25937]",[86357],"['en','fr']",11,<p>This document specifies general requirements and test methods for metallic dental tweezers of the Meriam type and for College type.</p><p>This document is not applicable to anatomical tweezers and surgical tweezers.</p>

26423,IS,,ISO 15098-3:2000,Dental tweezers — Part 3: College types,Précelles dentaires — Partie 3: Type College,2000-02-17,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[73463],"['en','fr']",5,

25975,IS,,ISO 15103-1:2000,Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Matériaux à base de poly(phénylène éther) (PPE) pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,2000-07-20,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[41627],"['en','fr']",8,

25976,IS,,ISO 15103-2:2000,Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux à base de poly(phénylène éther) (PPE) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,2000-07-20,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[39602],"['en','fr']",6,

39602,IS,,ISO 15103-2:2007,Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux à base de poly(phénylène éther) (PPE) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,2007-06-13,2,['83.080.20'],ISO/TC 61/SC 9,9599,[25976],[68366],"['en','fr']",6,"<p>ISO 15103-2:2007 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of poly(phenylene ether) moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before mou

25925,IS,,ISO 15105-1:2002,Plastics — Film and sheeting — Determination of gas-transmission rate — Part 1: Differential-pressure method,Plastiques — Film et feuille — Détermination du coefficient de transmission d'un gaz — Partie 1: Méthode en pression différentielle,2002-09-05,1,['83.140.10'],ISO/TC 61/SC 11,9599,,[41677],"['en','fr']",6,"<p>ISO 15105-1:2002 specifies a method for determining the gas transmission rate of any plastic material in the form of film, sheeting, laminate, co-extruded material or flexible plastic-coated material under a differential pressure.</p>"

37514,IS,,ISO 15105-2:2003,Plastics — Film and sheeting — Determination of gas-transmission rate — Part 2: Equal-pressure method,Plastiques — Film et feuille — Détermination du coefficient de transmission d'un gaz — Partie 2: Méthode isobarique,2003-02-12,1,['83.140.10'],ISO/TC 61/SC 11,9599,,[91001],"['en','fr']",15,"<p>ISO 15105-2:2003 specifies a method for the determination of the gas-transmission rate of any plastic material in the form of film, sheeting, laminate, co-extruded material or flexible plastic-coated material.</p><p>Specific examples, currently in use, of the method are described in the annexes.</p>"

55334,IS,,ISO 15110:2013,Paints and varnishes — Artificial weathering including acidic deposition,Peintures et vernis — Vieillissement artificiel comportant un dépôt acide,2013-03-07,1,['87.040'],ISO/TC 35/SC 9,9599,,[66948],"['en','fr']",14,"<p>ISO 15110:2013 specifies a so-called acid dew and fog test (ADF test) as a time-compressed laboratory test method for simulating, by the use of artificial acidic precipitation, the damaging effects of acidic atmospheric precipitation in association with UV radiation, neutral condensed precipitation, and changing temperature and humidity. This test method is intended to be used in evaluating, on the basis of relative performance rankings, the suitabil

41124,IS,,ISO 15112:2007,Natural gas — Energy determination,Gaz naturel — Détermination d'énergie,2007-11-26,1,['75.060'],ISO/TC 193,9599,,[56157],['en'],62,"<p>ISO 15112:2007 provides the means for the energy determination of natural gas by measurement or by calculation, and describes the related techniques and measures that are necessary to take. The calculation of thermal energy is based on the separate measurement of the quantity, either by mass or by volume, of gas transferred and its measured or calculated calorific value. The general means of calculating uncertainties are also given.</p><p>Only systems currently in use are described.</p><p>NOTE Use of such systems in commerci

56157,IS,,ISO 15112:2011,Natural gas — Energy determination,Gaz naturel — Détermination de l'énergie,2011-07-06,2,['75.060'],ISO/TC 193,9599,[41124],[75631],"['en','fr']",63,"<p>ISO 15112:2011 provides the means for energy determination of natural gas by measurement or by calculation, and describes the related techniques and measures that are necessary to take. The calculation of thermal energy is based on the separate measurement of the quantity, either by mass or by volume, of gas transferred and its measured or calculated calorific value. The general means of calculating uncertainties are also given.</p><p>Only systems currently in use are described.</p><p>ISO 15112:2011 applies to any ga

26428,IS,,ISO 15113:1999,Rubber — Determination of frictional properties,Caoutchouc — Détermination des propriétés frictionnelles,1999-05-13,1,['83.060'],ISO/TC 45/SC 2,9599,,[41458],['en'],19,

35711,IS,Cor,ISO 15113:1999/Cor 1:2001,Rubber — Determination of frictional properties — Technical Corrigendum 1,Caoutchouc — Détermination des propriétés frictionnelles — Rectificatif technique 1,2001-08-02,1,['83.060'],ISO/TC 45/SC 2,9599,,[41458],['en'],1,

55365,IS,,ISO 15118-1:2013,Road vehicles — Vehicle to grid communication interface — Part 1: General information and use-case definition,Véhicules routiers — Interface de communication entre véhicule et réseau électrique — Partie 1: Informations générales et définition de cas d'utilisation,2013-04-16,1,['43.120'],ISO/TC 22/SC 31,9599,,[69113],"['en','ru']",65,"<p>ISO 15118 specifies the communication between Electric Vehicles (EV), including Battery Electric Vehicles and Plug-In Hybrid Electric Vehicles, and the Electric Vehicle Supply Equipment (EVSE). As the communication parts of this generic equipment are the Electric Vehicle Communication Controller (EVCC) and the Supply Equipment Commu

62984,IS,,ISO 15118-8:2018,Road vehicles — Vehicle to grid communication interface — Part 8: Physical layer and data link layer requirements for wireless communication,Véhicules routiers — Interface de communication entre véhicule et réseau électrique — Partie 8: Exigences relatives à la couche physique et à la couche de liaison entre les données pour la communication sans fil,2018-02-27,1,['43.120'],ISO/TC 22/SC 31,9599,,[80525],"['en','fr']",34,"<p>ISO 15118-8:2018 specifies the requirements of the physical and data link layer of a wireless High Level Communication (HLC) between Electric Vehicles (EV) and the Electric Vehicle Supply Equipment (EVSE). The wireless communication technology i

6100,IS,,ISO 1512:1974,Paints and varnishes — Sampling,Peintures et vernis — Échantillonnage,1974-03-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[6101],"['en','fr']",4,

6101,IS,,ISO 1512:1991,Paints and varnishes — Sampling of products in liquid or paste form,Peintures et vernis — Échantillonnage des produits sous forme liquide ou en pâte,1991-12-05,2,['87.040'],ISO/TC 35/SC 9,9599,[6100],[28129],"['en','fr']",10,

6102,IS,,ISO 1513:1980,Paints and varnishes — Examination and preparation of samples for testing,Peintures et vernis — Examen et préparation des échantillons pour essais,1980-06-01,2,['87.040'],ISO/TC 35/SC 9,9599,,[6103],"['en','fr']",3,

6103,IS,,ISO 1513:1992,Paints and varnishes — Examination and preparation of samples for testing,Peintures et vernis — Examen et préparation des échantillons pour essais,1992-12-03,3,['87.040'],ISO/TC 35/SC 9,9599,[6102],[50490],"['en','fr']",4,"<p>Specifies both the procedure for preliminary examination of a single sample as received for testing, and the procedure for preparing a test sample by blending and reduction of a series of samples representative of a consignment or bulk of paint, varnish or related product, the samples of the product to be tested having been taken in accordance with ISO 1512. Describes preliminary procedure for fluid varnishes, emulsions, thinners, etc.; fluid pain

23134,IS,Cor,ISO 1513:1992/Cor 1:1994,Paints and varnishes — Examination and preparation of samples for testing — Technical Corrigendum 1,Peintures et vernis — Examen et préparation des échantillons pour essais — Rectificatif technique 1,1994-03-03,3,['87.040'],ISO/TC 35/SC 9,9599,,[50490],"['en','fr']",1,"<p>Deletes the footnote number in the title to clause 7 and footnote 4 at the bottom of page 3, and deletes '(type E)' in the title to subclause 8.4.</p>"

26452,IS,,ISO 15136-1:2001,Downhole equipment for petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps,Équipement de fond de trou pour les industries du pétrole et du gaz naturel — Pompes de fond à cavité progressive pour activation des puits — Partie 1: Pompes,2001-07-19,1,['75.180.10'],ISO/TC 67/SC 4,9599,,[44961],['en'],31,"<p>La présente partie de l'ISO 15136 donne les lignes directrices et exigences d'une pompe à cavités progressantes (PCP) de fond de puits utilisée dans l'industrie du pétrole et du gaz naturel pour la production de fluides mono ou multiphasiques. La présente partie de l'ISO 15136 traite de la pompe à cavités progre

26454,IS,,ISO 15138:2000,"Petroleum and natural gas industries — Offshore production installations — Heating, ventilation and air-conditioning","Industries du pétrole et du gaz naturel — Plates-formes de production — Chauffage, ventilation et climatisation",2000-11-16,1,['75.180.10'],ISO/TC 67/SC 6,9599,,[41321],['en'],105,"<p>La présente Norme internationale spécifie les exigences et fournit un guide pour la conception, les essais, l'installation et la mise en service des systèmes et des équipements de chauffage, de ventilation, de conditionnement d'air et de pressurisation sur toutes les installations de production en mer, qu'elles soient : - nouvelles et existantes ; - normalement habit

35579,IS,Cor,ISO 15138:2000/Cor 1:2001,"Petroleum and natural gas industries — Offshore production installations — Heating, ventilation and air-conditioning — Technical Corrigendum 1","Industries du pétrole et du gaz naturel — Plates-formes de production — Chauffage, ventilation et climatisation — Rectificatif technique 1",2001-06-14,1,['75.180.10'],ISO/TC 67/SC 6,9599,,[41321],['en'],1,

41321,IS,,ISO 15138:2007,"Petroleum and natural gas industries — Offshore production installations — Heating, ventilation and air-conditioning","Industries du pétrole et du gaz naturel — Plates-formes de production en mer — Chauffage, ventilation et climatisation",2007-12-04,2,['75.180.10'],ISO/TC 67/SC 6,9599,"[35579,26454]",[66458],"['en','fr']",110,"<p>ISO 15138:2007 specifies requirements and provides guidance for design, testing, installation and commissioning of heating, ventilation, air-conditioning and pressurization systems and equipment on all offshore production installations for the petroleum and natural gas industries that are new or existing, normally occupied by personnel, or

6104,IS,,ISO 1514:1974,Paints and varnishes — Standard panels for testing,Peintures et vernis — Panneaux normalisés pour essais,1974-05-01,1,['87.040'],ISO/TC 35,9599,,"[6105,6106]","['en','fr']",6,

6105,IS,,ISO 1514:1984,Paints and varnishes — Standard panels for testing,Peintures et vernis — Panneaux normalisés pour essais,1984-10-01,2,['87.040'],ISO/TC 35/SC 9,9599,[6104],[6106],"['en','fr']",8,

6106,IS,,ISO 1514:1993,Paints and varnishes — Standard panels for testing,Peintures et vernis — Panneaux normalisés pour essais,1993-11-18,3,['87.040'],ISO/TC 35/SC 9,9599,"[6104,6105]",[30934],"['en','fr']",7,"<p>Specifies several types of standard panel (steel panels, tinplate panels, aluminium panels, glass panels, hardboard panels, paper-faced plasterboard panels, fibre-reinforced cement panels) and describes procedures for their preparation prior to painting. These standard panels are for use in general methods of test for paints, varnishes and related products. Panels made from other materials and by other preparation procedures may be used by agreement.</p>"

30934,IS,,ISO 1514:2004,Paints and varnishes — Standard panels for testing,Peintures et vernis — Panneaux normalisés pour essais,2004-11-23,4,['87.040'],ISO/TC 35/SC 9,9599,[6106],[62347],"['en','fr','ru']",15,"<p>ISO 1514:2004 specifies several types of standard panel and describes procedures for their preparation prior to painting. These standard panels are for use in general methods of test for paints, varnishes and related products.</p>"

62347,IS,,ISO 1514:2016,Paints and varnishes — Standard panels for testing,Peintures et vernis — Panneaux normalisés pour essai,2016-07-18,5,['87.040'],ISO/TC 35/SC 9,9599,[30934],[85309],"['en','fr']",11,"<p>ISO 1514:2016 specifies several types of standard panels and describes procedures for their preparation prior to painting. These standard panels are for use in general methods of test for paints, varnishes and related products.</p>"

26459,IS,,ISO 15141-1:1998,Foodstuffs — Determination of ochratoxin A in cereals and cereal products — Part 1: High performance liquid chromatographic method with silica gel clean up,Produits alimentaires — Dosage de l'ochratoxine A dans les céréales et produits dérivés — Partie 1: Méthode par chromatographie liquide haute performance comprenant une étape d'extraction par chromatographie sur gel de silice,1998-10-22,1,['67.060'],ISO/TC 34/SC 4,9599,,[65579],"['en','fr']",9,

26460,IS,,ISO 15141-2:1998,Foodstuffs — Determination of ochratoxin A in cereals and cereal products — Part 2: High performance liquid chromatographic method with bicarbonate clean up,Produits alimentaires — Dosage de l'ochratoxine A dans les céréales et produits dérivés — Partie 2: Méthode par chromatographie liquide haute performance comprenant une étape d'extraction par une solution de bicarbonate,1998-10-22,1,['67.060'],ISO/TC 34/SC 4,9599,,[65579],"['en','fr']",11,

26485,IS,,ISO 15147:1999,Light conveyor belts — Tolerances on widths and lengths of cut light conveyor belts,Courroies transporteuses légères — Tolérances sur largeurs et longueurs des courroies transporteuses légères à bords tranchés,1999-07-08,1,['53.040.20'],ISO/TC 41/SC 3,9599,,[61048],"['en','fr']",4,

6107,IS,,ISO 1515:1973,Paints and varnishes — Determination of volatile and non-volatile matter,Peintures et vernis — Détermination des matières volatiles et non volatiles,1973-12-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[8464],"['en','fr']",2,

26024,IS,,ISO 15156-1:2001,Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 1: General principles for selection of cracking-resistant materials,Industries du pétrole et du gaz naturel — Matériaux pour utilisation en présence de H2S dans la production de pétrole et de gaz naturel — Partie 1: Principes généraux pour le choix des matériaux résistant au craquage,2001-12-20,1,['75.180.01'],ISO/TC 67,9599,,[53595],"['en','fr','ru']",10,

42709,IS,Cor,ISO 15156-1:2001/Cor 1:2005,Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 1: General principles for selection of cracking-resistant materials — Technical Corrigendum 1,Industries du pétrole et du gaz naturel — Matériaux pour utilisation en présence de H2S dans la production de pétrole et de gaz naturel — Partie 1: Principes généraux pour le choix des matériaux résistant au craquage — Rectificatif technique 1,2005-09-01,1,['75.180.01'],ISO/TC 67,9599,,[53595],"['en','fr','ru']",1,

53595,IS,,ISO 15156-1:2009,Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 1: General principles for selection of cracking-resistant materials,Industries du pétrole et du gaz naturel — Matériaux pour utilisation dans des environnements contenant de l'hydrogène sulfuré (H2S) dans la production de pétrole et de gaz — Partie 1: Principes généraux pour le choix des matériaux résistant au craquage,2009-10-14,2,['75.180.01'],ISO/TC 67,9599,"[26024,42709]",[66640],"['en','fr']",10,"<p>ISO 15156-1:2009 describes general principles and gives requirements and recommendations for the selection and qualification of metallic materia

66640,IS,,ISO 15156-1:2015,Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 1: General principles for selection of cracking-resistant materials,Industries du pétrole et du gaz naturel — Matériaux pour utilisation dans des environnements contenant de l'hydrogène sulfuré (H2S) dans la production de pétrole et de gaz — Partie 1: Principes généraux pour le choix des matériaux résistant à la fissuration,2015-08-20,3,['75.180.01'],ISO/TC 67,9599,[53595],[79658],"['en','fr']",10,"<p>ISO 15156-1:2015 describes general principles and gives requirements and recommendations for the selection and qualification of metallic materials