Withdrawn and superseded ISO standards — page 47 of 246

23991,IS,,ISO 14920:1999,Thermal spraying — Spraying and fusing of self-fluxing alloys,Projection thermique — Projection et fusion des revêtements obtenus par projection thermique des alliages autofondants,1999-02-11,1,['25.220.20'],ISO/TC 107,9599,,[60997],"['en','fr']",8,

60997,IS,,ISO 14920:2015,Thermal spraying — Spraying and fusing of self-fluxing alloys,Projection thermique — Projection et fusion d'alliages autofondants,2015-01-08,2,['25.220.20'],ISO/TC 107,9599,[23991],[81828],"['en','fr']",8,"<p>ISO 14920:2015 defines the procedure for thermal spraying of self-fluxing alloys that are simultaneously or subsequently fused to create a homogeneous, diffusion bonded coating.</p>"

23992,IS,,ISO 14921:2001,Thermal spraying — Procedures for the application of thermally sprayed coatings for engineering components,Projection thermique — Procédure d'application de revêtements obtenus par projection thermique pour les pièces mécaniques,2001-08-23,1,['25.220.20'],ISO/TC 107,9599,,[45970],"['en','fr']",6,

27106,IS,,ISO 14922-1:1999,Thermal spraying — Quality requirements of thermally sprayed structures — Part 1: Guidance for selection and use,Projection thermique — Exigences qualité des constructions obtenues par projection thermique — Partie 1: Lignes directrices pour leur sélection et utilisation,1999-07-01,1,['25.220.20'],ISO/TC 107,9599,,[75427],"['en','fr']",5,"<p>This standard specifies guidelines to describe thermal spraying quality requirements suitable for application by the</p><p>manufacturers using the thermal spraying process for coating new parts, for repair and maintenance. They are</p><p>structured in the way that they can be used for any type of construction to be sprayed. The

27107,IS,,ISO 14922-2:1999,Thermal spraying — Quality requirements of thermally sprayed structures — Part 2: Comprehensive quality requirements,Projection thermique — Exigences qualité des constructions obtenues par projection thermique — Partie 2: Exigences qualité complètes,1999-07-01,1,['25.220.20'],ISO/TC 107,9599,,[75427],"['en','fr']",10,"<p>This standard specifies requirements so that:</p><p>? It is independent of the type of the thermally sprayed structure.</p><p>? It defines quality requirements for thermal spraying both in workshops and on site.</p><p>? It provides guidance for describing a manufacturer's capability to produce thermally sprayed constructions to</p><p>meet specified

27108,IS,,ISO 14922-3:1999,Thermal spraying — Quality requirements of thermally sprayed structures — Part 3: Standard quality requirements,Projection thermique — Exigences qualité des constructions obtenues par projection thermique — Partie 3: Exigences qualité standard,1999-07-01,1,['25.220.20'],ISO/TC 107,9599,,[75427],"['en','fr']",10,"<p>This standard specifies requirements so that:</p><p>? It is independent of the type of the thermally sprayed structure.</p><p>? It defines quality requirements for thermal spraying both in workshops and on site.</p><p>? It provides guidance for describing a manufacturer's capability to produce thermally sprayed constructions to</p><p>meet specified requi

27109,IS,,ISO 14922-4:1999,Thermal spraying — Quality requirements of thermally sprayed structures — Part 4: Elementary quality requirements,Projection thermique — Exigences qualité des constructions obtenues par projection thermique — Partie 4: Exigences qualité élémentaires,1999-07-01,1,['25.220.20'],ISO/TC 107,9599,,[75427],"['en','fr']",6,"<p>This standard specifies requirements so that:</p><p>? It is independent of the type of the thermally sprayed structure.</p><p>? It defines quality requirements for thermal spraying both in workshops and on site.</p><p>? It provides guidance for describing a manufacturer´s capability to produce thermally sprayed constructions to</p><p>meet specified

38210,IS,,ISO 14931:2004,Leather — Guide to the selection of leather for apparel (excluding furs),Cuirs — Guide pour la sélection des cuirs pour vêtements (à l'exclusion des fourrures),2004-12-01,1,['59.140.30'],ISO/TC 120/SC 2,9599,,[55736],"['en','fr']",4,"<p>ISO 14931:2004 gives recommended values and related test methods for apparel leather, excluding furs. It also specifies the sampling and conditioning procedures to be used for laboratory samples.</p><p>It does not apply to leather materials with coating thicknesses exceeding 0,15 mm.</p>"

55736,IS,,ISO 14931:2015,Leather — Guide to the selection of leather for apparel (excluding furs),Cuirs — Guide pour la sélection des cuirs pour vêtements (à l'exclusion des fourrures),2015-02-25,2,['59.140.30'],ISO/TC 120/SC 2,9599,[38210],[77275],"['en','fr']",4,<p>ISO 14931:2015 gives recommended values and related test methods for apparel leather excluding furs. It also specifies the sampling and conditioning procedures of laboratory samples.</p>

55273,IS,,ISO 14932:2012,Rubber compounding ingredients — Organic vulcanizing agents — Determination of organic peroxide content,Ingrédients de mélange du caoutchouc — Agents vulcanisants organiques — Détermination de la teneur en peroxyde organique,2012-01-20,1,['83.040.20'],ISO/TC 45/SC 3,9599,,[83045],"['en','fr']",33,"<p>ISO 14932:2012 specifies four methods for the determination of the content of the following groups of organic peroxides used as rubber vulcanizing agents. There are three titration methods and one using capillary gas-chromatography as given below.</p><p>Titration method A for group a) peroxyketals: DTBPC: 1,1-Di(<i>tert</i>-butylperoxy)cyclohexane; DBPMC: 1,1-Di(<i>tert<

34946,IS,,ISO 14934-2:2006,Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods,Essais au feu — Étalonnage et utilisation des appareils de mesure du flux thermique — Partie 2: Méthodes d'étalonnage primaire,2006-02-09,1,"['13.220.40','13.220.50']",ISO/TC 92/SC 1,9599,,[55659],"['en','fr']",45,"<p>ISO 14934-2:2006 describes three methods for calibration of total hemispherical radiometers and total heat flux meters that are exposed to a well-defined radiation from a radiant heat source. The equipment is designed to minimize influences due to convective heat transfer during calibration. It is important to note that when the instruments are used in practice

34947,IS,,ISO 14934-3:2006,Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method,Essais au feu — Étalonnage et utilisation des appareils de mesure du flux thermique — Partie 3: Méthode d'étalonnage secondaire,2006-09-06,1,"['13.220.40','13.220.50']",ISO/TC 92/SC 1,9599,,[53697],['en'],14,"<p>ISO 14934-3:2006 specifies a method for the calibration of heat-flux meters for use in fire testing, gives information on the accuracy of the calibration, gives guidance on the calibration and the care of heat-flux meters.</p><p>ISO 14934-3:2006 applies only to instruments having plane sensing surfaces.</p><p>ISO 14934-3:2006 does not apply to sensing surfaces in the

25972,IS,,ISO 14935:1998,Petroleum and related products — Determination of wick flame persistence of fire-resistant fluids,Pétrole et produits connexes — Détermination de la persistance d'une flamme sur une mèche trempée dans un fluide difficilement inflammable,1998-04-23,1,['75.080'],ISO/TC 28,9599,,[71881],"['en','fr']",6,

25989,IS,,ISO 14937:2000,"Sterilization of health care products — General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices","Stérilisation des produits de santé — Exigences générales pour la caractérisation d'un agent stérilisant et pour le développement, la validation et la vérification de routine d'un processus de stérilisation pour dispositifs médicaux",2000-12-21,1,['11.080.01'],ISO/TC 198,9599,,[44954],"['en','fr']",35,

38546,IS,Cor,ISO 14937:2000/Cor 1:2003,"Sterilization of health care products — General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices — Technical Corrigendum 1","Stérilisation des produits de santé — Exigences générales pour la caractérisation d'un agent stérilisant et pour le développement, la validation et la vérification de routine d'un processus de stérilisation pour dispositifs médicaux — Rectificatif technique 1",2003-06-03,1,['11.080.01'],ISO/TC 198,9599,,[44954],"['en','fr']",2,

25641,IS,,ISO 14945:2004,Small craft — Builder's plate,Petits navires — Plaque du constructeur,2004-03-16,1,['47.080'],ISO/TC 188,9599,,[69555],"['en','fr']",6,"<p>ISO 14945:2004 establishes requirements for the uniform display of information to be exhibited on the builder's plate of small craft with a hull length <i>L</i>_H of up to 24 m, measured according to ISO 8666. Excluded are inflatable boats covered by ISO 6185 and personal watercraft covered by ISO 13590.</p>"

25642,IS,,ISO 14946:2001,Small craft — Maximum load capacity,Petits navires — Capacité de charge maximale,2001-10-04,1,['47.080'],ISO/TC 188,9599,,[71063],"['en','fr']",3,

24678,IS,,ISO 14953:2000,Space systems — Structural design — Determination of loading levels for static qualification testing of launch vehicles,Systèmes spatiaux — Conception des structures — Détermination des niveaux de chargement pour un essai statique de qualification des véhicules lanceurs,2000-05-04,1,['49.140'],ISO/TC 20/SC 14,9599,,[85533],"['en','fr']",4,<p>This International Standard specifies a procedure for determining the loading level of a qualification test of a launch</p><p>vehicle structure and takes into account all the minimum allowable strength characteristics necessary for these</p><p>structures.</p><p>This International Standard establishes the required resistance neces

55294,IS,,ISO 14955-1:2014,Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools,Machines-outils — Évaluation environnementale des machines-outils — Partie 1: Méthode de conception pour l'efficacité énergétique des machines-outils,2014-05-13,1,['25.080.01'],ISO/TC 39,9599,,[70035],"['en','fr']",47,"<p>ISO 14955-1:2014 constitutes the application of eco-design standards to machine tools, mainly for metal working numerically controlled (NC) machine tools.</p><p>ISO 14955-1:2014 addresses the energy efficiency of machine tools during the use stage, i.e. the working life of the machine tool. Elements of eco-design procedure acco

6075,IS,,ISO 1496-1:1984,Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes,Conteneurs de la série 1 — Spécifications et essais — Partie 1: Conteneurs d'usage général pour marchandises diverses,1984-12-01,4,['55.180.10'],ISO/TC 104/SC 1,9599,,[6076],"['en','fr']",21,

6077,IS,Amd,ISO 1496-1:1984/Amd 1:1987,Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes — Amendment 1,Conteneurs de la série 1 — Spécifications et essais — Partie 1: Conteneurs d'usage général pour marchandises diverses — Amendement 1,1987-01-29,4,['55.180.10'],ISO/TC 104/SC 1,9599,,[6076],,,

6076,IS,,ISO 1496-1:1990,Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes,Conteneurs de la série 1 — Spécifications et essais — Partie 1: Conteneurs d'usage général pour marchandises diverses,1990-08-23,5,['55.180.10'],ISO/TC 104/SC 1,9599,"[6077,6571,6075]","[59672,36594]","['en','fr']",24,"<p>Lays down the basic specifications and testing requirements for ISO series 1 freight containers of the totally enclosed general purpose types and certain specific purpose types (closed, vented, ventilated or open top) which are suitable for international exchange and for conveyance by road, rail and sea, including interchange between these

20615,IS,Amd,ISO 1496-1:1990/Amd 1:1993,Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes — Amendment 1: 1AAA and 1BBB containers,Conteneurs de la série 1 — Spécifications et essais — Partie 1: Conteneurs d'usage général pour marchandises diverses — Amendement 1: Conteneurs 1AAA et 1BBB,1993-02-25,5,['55.180.10'],ISO/TC 104/SC 1,9599,,"[59672,36594]","['en','fr']",3,"<p>Amends subclauses 5.7, 5.8.1.1, 6.4.2, F.2.2, table 3, and annex D, replaces table 2, subclauses 5.8.3, B.2.2, and the titles on pages 16 and 18.</p>"

20442,IS,Amd,ISO 1496-1:1990/Amd 2:1998,Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes — Amendment 2,Conteneurs de la série 1 — Spécifications et essais — Partie 1: Conteneurs d'usage général pour marchandises diverses — Amendement 2,1998-06-18,5,['55.180.10'],ISO/TC 104/SC 1,9599,,"[59672,36594]","['en','fr']",2,

39871,IS,Amd,ISO 1496-1:1990/Amd 3:2005,Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes — Amendment 3,Conteneurs de la série 1 — Spécifications et essais — Partie 1: Conteneurs d'usage général pour marchandises diverses — Amendement 3,2005-06-27,5,['55.180.10'],ISO/TC 104/SC 1,9599,,[59672],"['en','fr']",2,

39872,IS,Amd,ISO 1496-1:1990/Amd 4:2006,Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes — Amendment 4,Conteneurs de la série 1 — Spécifications et essais — Partie 1: Conteneurs d'usage général pour marchandises diverses — Amendement 4,2006-10-20,5,['55.180.10'],ISO/TC 104/SC 1,9599,,[59672],"['en','fr']",8,

41912,IS,Amd,ISO 1496-1:1990/Amd 5:2006,Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes — Amendment 5: Door end security,Conteneurs de la série 1 — Spécifications et essais — Partie 1: Conteneurs d'usage général pour marchandises diverses — Amendement 5: Sécurité de la porte,2006-05-11,5,['55.180.10'],ISO/TC 104/SC 1,9599,,[59672],"['en','fr']",1,

6078,IS,,ISO 1496-2:1979,Series 1 freight containers — Specification and testing — Part 2: Thermal containers,Conteneurs de la série 1 — Spécifications et essais — Partie 2: Conteneurs à caractéristiques thermiques,1979-11-01,2,['55.180.10'],ISO/TC 104,9599,,[6079],['en'],39,

6079,IS,,ISO 1496-2:1988,Series 1 freight containers — Specification and testing — Part 2: Thermal containers,Conteneurs de la série 1 — Spécifications et essais — Partie 2: Conteneurs à caractéristiques thermiques,1988-10-06,3,['55.180.10'],ISO/TC 104/SC 2,9599,[6078],[20449],"['en','fr']",50,

20449,IS,,ISO 1496-2:1996,Series 1 freight containers — Specification and testing — Part 2: Thermal containers,Conteneurs de la série 1 — Spécifications et essais — Partie 2: Conteneurs à caractéristiques thermiques,1996-10-10,4,['55.180.10'],ISO/TC 104/SC 2,9599,[6079],[45621],"['en','fr']",51,

40905,IS,Amd,ISO 1496-2:1996/Amd 1:2006,Series 1 freight containers — Specification and testing — Part 2: Thermal containers — Amendment 1,Conteneurs de la série 1 — Spécifications et essais — Partie 2: Conteneurs à caractéristiques thermiques — Amendement 1,2006-02-06,4,['55.180.10'],ISO/TC 104/SC 2,9599,,[45621],"['en','fr']",5,

33393,IS,Cor,ISO 1496-2:1996/Cor 1:1997,Series 1 freight containers — Specification and testing — Part 2: Thermal containers — Technical Corrigendum 1,Conteneurs de la série 1 — Spécifications et essais — Partie 2: Conteneurs à caractéristiques thermiques — Rectificatif technique 1,1997-07-15,4,['55.180.10'],ISO/TC 104/SC 2,9599,,[45621],['fr'],,

45621,IS,,ISO 1496-2:2008,Series 1 freight containers — Specification and testing — Part 2: Thermal containers,Conteneurs de la série 1 — Spécifications et essais — Partie 2: Conteneurs à caractéristiques thermiques,2008-07-16,5,['55.180.10'],ISO/TC 104/SC 2,9599,"[33393,40905,20449]",[67458],['en'],65,"<p>ISO 1496-2:2008 gives the basic specifications and testing requirements for ISO series 1 thermal containers for international exchange and for conveyance of goods by road, rail and sea, including interchange between these forms of transport.</p>"

6080,IS,,ISO 1496-3:1981,Series 1 freight containers — Specification and testing — Part 3: Tank containers for liquids and gases,Conteneurs de la série 1 : Spécifications et essais — Partie 3: Conteneurs-citernes pour les liquides et les gaz,1981-12-01,2,['55.180.10'],ISO/TC 104,9599,,[6081],['en'],22,

6081,IS,,ISO 1496-3:1991,"Series 1 freight containers — Specification and testing — Part 3: Tank containers for liquids, gases and pressurized dry bulk","Conteneurs de la série 1 — Spécifications et essais — Partie 3: Conteneurs-citernes pour les liquides, les gaz et les produits solides en vrac pressurisés",1991-12-19,3,['55.180.10'],ISO/TC 104/SC 2,9599,[6080],[3047],"['en','fr']",26,

3047,IS,,ISO 1496-3:1995,"Series 1 freight containers — Specification and testing — Part 3: Tank containers for liquids, gases and pressurized dry bulk","Conteneurs de la série 1 — Spécifications et essais — Partie 3: Conteneurs-citernes pour les liquides, les gaz et les produits solides en vrac pressurisés",1995-02-23,4,['55.180.10'],ISO/TC 104/SC 2,9599,[6081],"[67457,46586]","['en','fr']",24,"<p>Cancels and replaces the third edition (1991). Specifies the basic specifications and testing requirements for ISO series 1 tank containers suitable for the carriage of gases, liquids and solid substances (dry bulk) which may be loaded or unloaded as liquids by gravity or pressure discharge, for i

40904,IS,Amd,ISO 1496-3:1995/Amd 1:2006,"Series 1 freight containers — Specification and testing — Part 3: Tank containers for liquids, gases and pressurized dry bulk — Amendment 1: Testing of the external restraint (longitudinal) dynamic","Conteneurs de la série 1 — Spécifications et essais — Partie 3: Conteneurs-citernes pour les liquides, les gaz et les produits solides en vrac pressurisés — Amendement 1: Essais de sollicitation extérieure (longitudinale) dynamique",2006-02-02,4,['55.180.10'],ISO/TC 104/SC 2,9599,,"[67457,46586]","['en','fr']",8,

6082,IS,,ISO 1496-4:1991,Series 1 freight containers — Specification and testing — Part 4: Non-pressurized containers for dry bulk,Conteneurs de la série 1 — Spécifications et essais — Partie 4: Conteneurs non pressurisés pour produits solides en vrac,1991-12-19,1,['55.180.10'],ISO/TC 104/SC 2,9599,,[81445],"['en','fr']",31,"<p>Specifies the basic specifications and testing requirements for containers of the dry bulk non-pressurized type which are suitable for international exchange and for conveyance by road, rail and sea. Annexes F and G are for information only.</p>"

22489,IS,Amd,ISO 1496-4:1991/Amd 1:1994,Series 1 freight containers — Specification and testing — Part 4: Non-pressurized containers for dry bulk — Amendment 1: 1AAA and 1BBB containers,Conteneurs de la série 1 — Spécifications et essais — Partie 4: Conteneurs non pressurisés pour produits solides en vrac — Amendement 1: Conteneurs 1AAA et 1BBB,1994-06-23,1,['55.180.10'],ISO/TC 104/SC 2,9599,,[81445],"['en','fr']",2,"<p>Amends subclauses 5.8.2, 5.10.1.1, 6.4.2, 6.6.2, B.2.2, tables 2, 3, figures A.6, B.3, B.5, D.1, F.1, replaces subclause 5.10.3.</p>"

43937,IS,Cor,ISO 1496-4:1991/Cor 1:2006,Series 1 freight containers — Specification and testing — Part 4: Non-pressurized containers for dry bulk — Technical Corrigendum 1,Conteneurs de la série 1 — Spécifications et essais — Partie 4: Conteneurs non pressurisés pour produits solides en vrac — Rectificatif technique 1,2006-03-06,1,['55.180.10'],ISO/TC 104/SC 2,9599,,[81445],"['en','fr']",1,

6083,IS,,ISO 1496-5:1977,Series 1 freight containers — Specification and testing — Part 5: Platform (container),Conteneurs de la série 1 — Spécifications et essais — Partie 5: Conteneurs plates-formes,1977-07-01,1,['55.180.10'],ISO/TC 104,9599,,[6084],"['en','fr']",12,

6084,IS,,ISO 1496-5:1991,Series 1 freight containers — Specification and testing — Part 5: Platform and platform-based containers,Conteneurs de la série 1 — Spécifications et essais — Partie 5: Conteneurs plates-formes et type plate-forme,1991-12-19,2,['55.180.10'],ISO/TC 104/SC 2,9599,"[6083,6088]",[67072],"['en','fr']",35,"<p>Specifies the basic specifications and testing requirements for containers designated 1AA, 1A, 1AX, 1BB, 1B, 1BX, 1CC, 1C and 1CX which are suitable for international exchange and for conveyance by road, rail and sea.</p>"

20443,IS,Amd,ISO 1496-5:1991/Amd 1:1993,Series 1 freight containers — Specification and testing — Part 5: Platform and platform-based containers — Amendment 1: 1AAA and 1BBB containers,Conteneurs de la série 1 — Spécifications et essais — Partie 5: Conteneurs plates-formes et type plate-forme — Amendement 1: Conteneurs 1AAA et 1BBB,1993-02-25,2,['55.180.10'],ISO/TC 104/SC 1,9599,,[67072],"['en','fr']",2,"<p>Amends subclauses 1.1, 5.9.1.1, 6.4.2, B.2.2, F.2.2, table 2 and 3, figure D.1, replaces subclause 5.9.3, title of figures B.3 and B.5.</p>"

20444,IS,Amd,ISO 1496-5:1991/Amd 2:1994,Series 1 freight containers — Specification and testing — Part 5: Platform and platform-based containers — Amendment 2,Conteneurs de la série 1 — Spécifications et essais — Partie 5: Conteneurs plates-formes et type plate-forme — Amendement 2,1994-08-25,2,['55.180.10'],ISO/TC 104/SC 1,9599,,[67072],"['en','fr']",2,"<p>Adds a final paragraph to subclause 5.2, replaces note 3, replaces the last paragraph of subclause 6.1, replaces the first paragraph of subclause F.3.1, and adds figure F.1.</p>"

6088,IS,,ISO 1496-6C:1977,"Series 1 freight containers — Specification and testing — Part 6C: Platform based containers, open-sided, with complete superstructure","Conteneurs de la série 1 — Spécifications et essais — Partie 6C: Conteneurs type plate-forme, à parois ouvertes, avec superstructure complète",1977-07-01,1,['55.180.10'],ISO/TC 104,9599,,[6084],"['en','fr']",15,

6086,IS,,ISO 1496-7:1974,Series 1 freight containers — Specification and testing — Part 7: Air mode containers,Conteneurs de la série 1 — Spécifications et essais — Partie 7: Conteneurs pour transport aérien,1974-12-01,1,['55.180.10'],ISO/TC 104,9599,,[15457],"['en','fr']",31,

61839,IS,,ISO 14960-1:2014,Tubeless tyres — Valves and components — Part 1: Test methods,Pneumatiques sans chambre — Valves et composants — Partie 1: Méthodes d'essai,2014-10-29,1,['83.160.01'],ISO/TC 31/SC 9,9599,[39354],[82015],"['en','fr']",10,"<p>ISO 14960-1:2014specifies test methods for snap-in tubeless tyre valves intended for, but are not limited to, highway applications.</p>"

61840,IS,,ISO 14960-2:2014,Tubeless tyres — Valves and components — Part 2: Clamp-in tubeless tyre valve-test method,Pneumatiques sans chambre — Valves et composants — Partie 2: Méthodes d'essai pour les valves à visser,2014-10-29,1,['83.160.01'],ISO/TC 31/SC 9,9599,,[82016],"['en','fr']",7,"<p>ISO 14960-2:2014 establishes minimum specifications for clamp-in tubeless tire valves. A clamp-in valve is an assembly of a valve stem, valve core, valve cap, rubber grommet or O-ring, hex nut, and ring washer which conforms to ISO 9413.</p>"

39354,IS,,ISO 14960:2004,Tubeless tyres — Valves and components — Test methods,Pneumatiques sans chambre — Valves et composants — Méthodes d'essai,2004-09-01,1,['83.160.01'],ISO/TC 31/SC 9,9599,,[61839],"['en','fr']",10,"<p>ISO 14960:2004 specifies test methods and performance requirements for snap-in tubeless tyre valves and their components, intended for, but not limited to, highway applications.</p>"

26095,IS,,ISO 14961:1997,Space data and information transfer systems — Parameter value language specification,Systèmes de transfert des informations et données spatiales — Spécification des valeurs paramétriques du langage,1997-12-18,1,['49.140'],ISO/TC 20/SC 13,9599,,[34701],"['en','fr']",50,

36256,IS,,ISO 14966:2002,Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method,Air ambiant — Détermination de la concentration en nombre des particules inorganiques fibreuses — Méthode par microscopie électronique à balayage,2002-11-15,1,['13.040.20'],ISO/TC 146/SC 3,9599,,[75583],"['en','fr']",42,"<p>ISO 14966:2002 specifies a method using scanning electron microscopy for determination of the concentration of inorganic fibrous particles in the air. The method specifies the use of gold-coated, capillary-pore, track-etched membrane filters, through which a known volume of air has been drawn. Using energy-dispersive X-ray an

46438,IS,Cor,ISO 14966:2002/Cor 1:2007,Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method — Technical Corrigendum 1,Air ambiant — Détermination de la concentration en nombre des particules inorganiques fibreuses — Méthode par microscopie électronique à balayage — Rectificatif technique 1,2007-07-03,1,['13.040.20'],ISO/TC 146/SC 3,9599,,[75583],"['en','fr']",1,

26114,IS,,ISO 14968:1999,Paper and board — Cut-size office paper — Measurement of curl in a pack of sheets,Papier et carton — Papier en format à usage de bureau — Mesurage du tuilage dans un paquet de feuilles,1999-03-04,1,['85.060'],ISO/TC 6/SC 2,9599,,[83283],"['en','fr']",8,"<p>This International Standard specifies a method for the measurement of curl in cut-size office papers. The test method</p><p>would typically be used in evaluating papers of the type described in ISO 216.</p><p>This method is limited to papers with a maximum dimension of 300 mm in both directions.</p><p>The measurement may be made on papers as received, after conditioning, or after processing in a copier or printin

25800,IS,,ISO 14969:1999,Quality systems — Medical devices — Guidance on the application of ISO 13485 and ISO 13488,Systèmes qualité — Dispositifs médicaux — Lignes directrices pour l'application de l'ISO 13485 et l'ISO 13488,1999-06-03,1,"['03.120.10','11.040.01']",ISO/TC 210,9599,,[33752],['en'],30,

25799,IS,,ISO 14971-1:1998,Medical devices — Risk management — Part 1: Application of risk analysis,Dispositifs médicaux — Gestion des risques — Partie 1: Application de l'analyse des risques,1998-10-01,1,['11.040.01'],ISO/TC 210,9599,,[31550],"['en','fr']",17,

31550,IS,,ISO 14971:2000,Medical devices — Application of risk management to medical devices,Dispositifs médicaux — Application de la gestion des risques aux dispositifs médicaux,2000-11-30,1,['11.040.01'],ISO/TC 210,9599,[25799],[38193],"['en','fr']",32,

36029,IS,Amd,ISO 14971:2000/Amd 1:2003,Medical devices — Application of risk management to medical devices — Amendment 1: Rationale for requirements,Dispositifs médicaux — Application de la gestion des risques aux dispositifs médicaux — Amendement 1: Justification des exigences,2003-02-19,1,['11.040.01'],ISO/TC 210,9599,,[38193],"['en','fr']",7,

38193,IS,,ISO 14971:2007,Medical devices — Application of risk management to medical devices,Dispositifs médicaux — Application de la gestion des risques aux dispositifs médicaux,2007-02-28,2,['11.040.01'],ISO/TC 210,9599,"[36029,31550]",[72704],"['en','fr','ru']",82,"<p>ISO 14971:2007 specifies a process for a manufacturer to identify the hazards associated with medical devices, including <i>in vitro</i> diagnostic (IVD) medical devices, to estimate and evaluate the associated risks, to control

42930,IS,,ISO 14978:2006,Geometrical product specifications (GPS) — General concepts and requirements for GPS measuring equipment,Spécification géométrique des produits (GPS) - Concepts et exigences généraux pour les équipements de mesure GPS,2006-06-21,1,['17.040.30'],ISO/TC 213,9599,,[71148],"['en','fr']",37,"<p>ISO 14978:2006 specifies the general requirements, terms and definitions of characteristics of simple GPS measuring equipment, e.g. micrometers, dial gauges, callipers, surface plates, height gauges, gauge blocks, but not necessarily excluding more complicated equipment. It forms the basis for standards defining and describing the design characteristics and metrological characteris

50992,IS,Cor,ISO 14978:2006/Cor 1:2008,Geometrical product specifications (GPS) — General concepts and requirements for GPS measuring equipment — Technical Corrigendum 1,Spécification géométrique des produits (GPS) - Concepts et exigences généraux pour les équipements de mesure GPS — Rectificatif technique 1,2008-02-14,1,['17.040.30'],ISO/TC 213,9599,,[71148],"['en','fr']",1,

24372,IS,,ISO 14993:2001,"Corrosion of metals and alloys — Accelerated testing involving cyclic exposure to salt mist, 'dry' and 'wet' conditions","Corrosion des métaux et alliages — Essais accélérés comprenant des expositions cycliques à des conditions de brouillard salin, de séchage et d'humidité",2001-10-04,1,['77.060'],ISO/TC 156,9599,,[71869],"['en','fr']",10,

71869,IS,,ISO 14993:2018,"Corrosion of metals and alloys — Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions","Corrosion des métaux et alliages — Essais accélérés comprenant des expositions cycliques à des conditions de brouillard salin, de séchage et d'humidité",2018-07-26,2,['77.060'],ISO/TC 156,9599,[24372],[89968],['en'],15,"<p>This document specifies the apparatus and test procedure to be used in conducting accelerated corrosion tests for the comparative evaluation of metallic materials with or without permanent corrosion protection or temporary corrosion protection in salt-contaminated outdoor environments. The test involves cyclic exposure of the speci

25611,IS,,ISO 14997:2003,Optics and optical instruments — Test methods for surface imperfections of optical elements,Optique et instruments d'optique — Méthodes d'essai applicables aux imperfections de surface des éléments optiques,2003-04-28,1,['37.020'],ISO/TC 172/SC 1,9599,,[55747],"['en','fr']",20,"<p>ISO 14997:2003 establishes the physical principles and practical means for the implementation of two methods, specified in ISO 10110-7, for measuring surface imperfections. These methods are: Method l, the surface area obscured or affected by the defects, and, Method ll, the visibility of the imperfections.</p><p>Both methods are suitable for prototype, small scale or large scale production

55747,IS,,ISO 14997:2011,Optics and photonics — Test methods for surface imperfections of optical elements,Optique et photonique — Méthodes d'essai applicables aux imperfections de surface des éléments optiques,2011-04-12,2,['37.020'],ISO/TC 172/SC 1,9599,[25611],[63464],"['en','fr']",14,<p>ISO 14997:2011 establishes the physical principles and practical means for the implementation of methods for measuring surface imperfections. This method evaluates the surface area obscured or affected by the imperfections.</p>

33614,IS,,ISO 14999-4:2007,Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 4: Interpretation and evaluation of tolerances specified in ISO 10110,Optique et photonique — Mesurage interférométrique de composants et de systèmes optiques — Partie 4: Directives pour l'évaluation des tolérances spécifiées dans l'ISO 10110,2007-07-10,1,['37.020'],ISO/TC 172/SC 1,9599,,[57568],"['en','fr']",15,<p>ISO 14999-4:2007 applies to the interpretation of interferometric data relating to the measurement of optical elements.</p><p>ISO 14999-4:2007 gives definitions of the optical functions specified in the preparation of drawings for optical elements and system

57568,IS,,ISO 14999-4:2015,Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 4: Interpretation and evaluation of tolerances specified in ISO 10110,Optique et photonique — Mesurage interférométrique de composants et de systèmes optiques — Partie 4: Directives pour l'évaluation des tolérances spécifiées dans l'ISO 10110,2015-07-23,2,['37.020'],ISO/TC 172/SC 1,9599,[33614],"[82255,86356]","['en','fr']",27,"<p>ISO 14999-4:2015 applies to the interpretation of interferometric data relating to the measurement of optical elements.</p><p>ISO 14999-4:2015 gives definitions of the optical functions and values specified in the preparation of drawings for

3597,IS,,ISO 15:1981,Rolling bearings — Radial bearings — Boundary dimensions — General plan,Roulements — Roulements radiaux — Dimensions d'encombrement — Plan général,1981-12-01,1,['21.100.20'],ISO/TC 4,9599,"[3599,3600]",[20513],"['en','fr']",16,

3598,IS,Add,ISO 15:1981/Add 1:1985,Rolling bearings — Radial bearings — Boundary dimensions — General plan — Addendum 1: Diameter series 7 (d greater than or equal to 12 mm and less than or equal to 30 mm),Roulements — Roulements radiaux — Dimensions d'encombrement — Plan général — Additif 1: Série de diamètres 7 (d supérieur ou égal à 12 mm et inférieur ou égal à 30 mm),1985-06-20,1,['21.100.20'],ISO/TC 4,9599,,[20513],['en'],1,

20513,IS,,ISO 15:1998,"Rolling bearings — Radial bearings — Boundary dimensions, general plan","Roulements — Roulements radiaux — Dimensions d'encombrement, plan général",1998-04-28,2,['21.100.20'],ISO/TC 4,9599,"[3598,3597]",[55216],"['en','fr']",19,

55216,IS,,ISO 15:2011,"Rolling bearings — Radial bearings — Boundary dimensions, general plan","Roulements — Roulements radiaux — Dimensions d'encombrement, plan général",2011-03-01,3,['21.100.20'],ISO/TC 4,9599,[20513],[69977],"['en','fr']",19,"<p>ISO 15:2011 specifies preferred boundary dimensions for radial bearings of the diameter series 7, 8, 9, 0, 1, 2, 3 and 4.</p>"

3979,IS,,ISO 150:1980,"Raw, refined and boiled linseed oil for paints and varnishes — Specifications and methods of test","Huiles de lin brutes, raffinées et cuites, pour peintures et vernis — Spécifications et méthodes d'essai",1980-08-01,1,['87.060.20'],ISO/TC 35,9599,,[36908],"['en','fr']",11,<p>Specifies the requirements and gives definitions for the raw materials. 23 C is the standard temperature for the test unless otherwise agreed. Stricter requirements may be agreed between the interested parties. Cancels and replaces the ISO Recommendation R 150-1960.</p>

36908,IS,,ISO 150:2006,"Raw, refined and boiled linseed oil for paints and varnishes — Specifications and methods of test","Huiles de lin brutes, raffinées et cuites, pour peintures et vernis — Spécifications et méthodes d'essai",2006-02-13,2,['87.060.20'],ISO/TC 35,9599,[3979],[71913],"['en','fr','ru']",9,"<p>ISO 150:2006 specifies the requirements and the corresponding methods of test for raw, refined and boiled linseed oils for paints and varnishes.</p>"

26186,IS,,ISO 15001:2003,Anaesthetic and respiratory equipment — Compatibility with oxygen,Matériel d'anesthésie et respiratoire — Compatibilité avec l'oxygène,2003-05-21,1,['11.040.10'],ISO/TC 121/SC 6,9599,,[44250],"['en','fr']",39,"<p>ISO 15001:2003 specifies minimum requirements for the oxygen compatibility of materials, components and devices for anaesthetic and respiratory applications which can come in contact with oxygen in normal condition or in single fault condition at gas pressures greater than 50 kPa. </p><p>ISO 15001:2003 is applicable to anaesthetic and respiratory equipment which are within the scope of ISO/TC 121, e.g. medical gas pipeline systems, pressure regulators, termi

26187,IS,,ISO 15002:2000,Flow-metering devices for connection to terminal units of medical gas pipeline systems,Dispositifs de mesure de débit pour raccordement aux prises murales des systèmes de distribution de gaz médicaux,2000-12-07,1,['11.040.10'],ISO/TC 121/SC 6,9599,,[42057],['en'],15,

42057,IS,,ISO 15002:2008,Flow-metering devices for connection to terminal units of medical gas pipeline systems,Dispositifs de mesure de débit pour raccordement aux prises murales des systèmes de distribution de gaz médicaux,2008-06-16,2,['11.040.10'],ISO/TC 121/SC 6,9599,[26187],[75973],"['en','fr']",21,"<div id='MathJax_Message' style='display: none;'></div><p>ISO 15002:2008 is applicable to:</p><ul><li>flow-metering devices that are connected, either directly or by means of flexible connecting assemblies, and disconnected by the operator at terminal units of a medical gas pipeline system for flow adjustment, measurement and delivery of medical gases;</li><li>flow-metering devices that are

71970,IS,Amd,ISO 15002:2008/Amd 1:2018,Flow-metering devices for connection to terminal units of medical gas pipeline systems — Amendment 1,Dispositifs de mesure de débit pour raccordement aux prises murales des systèmes de distribution de gaz médicaux — Amendement 1,2018-01-03,2,['11.040.10'],ISO/TC 121/SC 6,9599,,[75973],"['en','fr']",1,

38800,IS,,ISO 15003:2006,Agricultural engineering — Electrical and electronic equipment — Testing resistance to environmental conditions,Génie agricole — Matériel électrique et électronique — Essais de résistance aux conditions environnementales,2006-02-17,1,['65.060.99'],ISO/TC 23/SC 19,9599,,[71188],['en'],25,"<p>ISO 15003:2006 provides design requirements and guidance for the manufacturers of electrical and electronic equipment for use in all kinds of mobile (including hand-held) agricultural machinery, forestry machinery, landscaping and gardening machinery. It gives tests for specific environmental conditions and defines severity levels for tests which relate to the environmental extrem

38951,IS,,ISO 15004-1:2006,Ophthalmic instruments — Fundamental requirements and test methods — Part 1: General requirements applicable to all ophthalmic instruments,Instruments ophtalmiques — Exigences fondamentales et méthodes d'essai — Partie 1: Exigences générales applicables à tous les instruments ophtalmiques,2006-06-09,1,['11.040.70'],ISO/TC 172/SC 7,9599,[26191],[72616],"['en','fr']",8,"<p>ISO 15004-1:2006 specifies fundamental requirements for non-invasive, active and non-active ophthalmic instruments. ISO 15004-1:2006 is also applicable to low-vision aids and tonometers, but not to other ophthalmic instruments which are used in contact with the globe of the eye.</p><p>ISO 15004-1:2

26191,IS,,ISO 15004:1997,Ophthalmic instruments — Fundamental requirements and test methods,Instruments ophtalmiques — Exigences fondamentales et méthodes d'essai,1997-12-11,1,['11.040.70'],ISO/TC 172/SC 7,9599,,"[38951,38952]","['en','fr']",15,

38952,IS,,ISO 15004-2:2007,Ophthalmic instruments — Fundamental requirements and test methods — Part 2: Light hazard protection,Instruments ophtalmiques — Exigences fondamentales et méthodes d'essai — Partie 2: Protection contre les dangers de la lumière,2007-01-29,1,['11.040.70'],ISO/TC 172/SC 7,9599,[26191],"[72053,79919,60552]","['en','fr']",37,<p>ISO 15004-2:2007 specifies fundamental requirements for optical radiation safety for ophthalmic instruments and is applicable to all ophthalmic instruments that direct optical radiation into or at the eye and for which there is a specific light hazards requirement section within their respective International Standards. It is also applicable to

34085,IS,,ISO 15005:2002,Road vehicles — Ergonomic aspects of transport information and control systems — Dialogue management principles and compliance procedures,Véhicules routiers — Aspects ergonomiques des systèmes de commande et d'information du transport — Principes de gestion du dialogue et essais de conformité,2002-06-20,1,"['13.180','43.040.15']",ISO/TC 22/SC 39,9599,"[26192,32150]",[69238],"['en','fr']",14,"<p>This International Standard presents ergonomic principles for the design of the dialogues that take place between the driver of a road vehicle and the vehicle's transport information and control systems (TICS) while the vehicle is in motion. It also specifies compliance verif

34885,IS,,ISO 15006:2004,Road vehicles — Ergonomic aspects of transport information and control systems — Specifications and compliance procedures for in-vehicle auditory presentation,Véhicules routiers — Aspects ergonomiques des systèmes de commande et d'information du transport — Spécifications et modes opératoires de conformité concernant la présentation des informations auditives à bord du véhicule,2004-10-06,1,"['35.240.60','43.040.15']",ISO/TC 22,9599,[31318],[55322],"['en','fr']",11,"<p>ISO 15006:2004 establishes ergonomic specifications for the presentation of auditory information related to transport information and control systems (TICS) through speech or sounds. It is applicable o

26194,IS,,ISO 15007-1:2002,Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters,Véhicules routiers — Mesurage du comportement visuel du conducteur en relation avec les systèmes de commande et d'information du transport — Partie 1: Définitions et paramètres,2002-03-07,1,"['13.180','43.040.15']",ISO/TC 22,9599,,[56621],"['en','fr']",8,

56621,IS,,ISO 15007-1:2014,Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters,Véhicules routiers — Mesurage du comportement visuel du conducteur en relation avec les systèmes de commande et d'information du transport — Partie 1: Définitions et paramètres,2014-10-29,2,"['13.180','43.040.15']",ISO/TC 22/SC 39,9599,[26194],[63220],"['en','fr']",13,"<p>ISO 15007-1:2014 defines key terms and parameters applied in the analysis of driver visual behaviour focused on glance and glance-related measures. These terms and parameters can be applied in environments from real-world driving experiments to labor

34886,IS,,ISO 15008:2003,Road vehicles — Ergonomic aspects of transport information and control systems — Specifications and compliance procedures for in-vehicle visual presentation,Véhicules routiers — Aspects ergonomiques des systèmes de commande et d'information du transport— Spécifications et modes opératoires de conformité pour la présentation visuelle à bord du véhicule,2003-03-14,1,"['13.180','43.040.15']",ISO/TC 22,9599,[26195],[50805],"['en','fr']",25,"<p>ISO 15008:2003 gives minimum specifications for the image quality and legibility of displays containing dynamic (changeable) visual information presented to the driver of a road vehicle by an on-board transport information and cont

50805,IS,,ISO 15008:2009,Road vehicles — Ergonomic aspects of transport information and control systems — Specifications and test procedures for in-vehicle visual presentation,Véhicules routiers — Aspects ergonomiques des systèmes de commande et d'information des transports — Spécifications et modes opératoires pour la présentation visuelle à bord du véhicule,2009-02-11,2,"['13.180','43.040.15']",ISO/TC 22/SC 39,9599,[34886],[62784],"['en','fr']",18,"<p>ISO 15008:2009 specifies minimum requirements for the image quality and legibility of displays containing dynamic (changeable) visual information presented to the driver of a road vehicle by on-board transport information and control systems

36130,IS,,ISO 15009:2002,"Soil quality — Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons — Purge-and-trap method with thermal desorption","Qualité du sol — Détermination par chromatographie en phase gazeuse des teneurs en hydrocarbures aromatiques volatils, en naphtalène et en hydrocarbures halogénés volatils — Méthode par purge et piégeage avec désorption thermique",2002-10-22,1,['13.080.10'],ISO/TC 190/SC 3,9599,,[53366],"['en','fr']",18,"<p>ISO 15009:2002 specifies a method for quantitative gas-chromatographic determination of volatile hydrocarbons, naphthalene and volatile halogenated hydrocarbons in so

53366,IS,,ISO 15009:2012,"Soil quality — Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons — Purge-and-trap method with thermal desorption","Qualité du sol — Détermination par chromatographie en phase gazeuse des teneurs en hydrocarbures aromatiques volatils, en naphtalène et en hydrocarbures halogénés volatils — Méthode par purge et piégeage avec désorption thermique",2012-06-29,2,['13.080.10'],ISO/TC 190/SC 3,9599,[36130],[65179],"['en','fr']",18,

26205,IS,,ISO 15011-1:2002,Health and safety in welding and allied processes — Laboratory method for sampling fume and gases generated by arc welding — Part 1: Determination of emission rate and sampling for analysis of particulate fume,Hygiène et sécurité en soudage et techniques connexes — Méthode de laboratoire d'échantillonnage des fumées et des gaz émis par le soudage à l'arc — Partie 1: Détermination du taux d'émission et échantillonnage pour l'analyse des poussières,2002-04-11,1,"['13.100','25.160.10']",ISO/TC 44/SC 9,9599,,[42808],"['en','fr']",10,<p>This European standard describes a method for the determination of the particulate fume emission rate from arc welding processes using

26206,IS,,ISO 15011-2:2003,"Health and safety in welding and allied processes — Laboratory method for sampling fume and gases generated by arc welding — Part 2: Determination of emission rates of gases, except ozone","Hygiène et sécurité en soudage et techniques connexes — Méthode de laboratoire d'échantillonnage des fumées et des gaz émis par le soudage à l'arc — Partie 2: Détermination du taux d'émission des gaz, à l'exception de l'ozone",2003-04-30,1,"['13.100','25.160.10']",ISO/TC 44/SC 9,9599,,[42789],"['en','fr']",11,"<p>ISO 15011-2:2003 provides guidance on the determination of emission rates of gases generated by arc welding using a fume box technique. It describes the test principle

29117,IS,,ISO 15011-3:2002,Health and safety in welding and allied processes — Laboratory method for sampling fume and gases generated by arc welding — Part 3: Determination of ozone concentration using fixed point measurements,Hygiène et sécurité en soudage et techniques connexes — Méthode de laboratoire d'échantillonnage des fumées et des gaz émis par le soudage à l'arc — Partie 3: Détermination de la concentration en ozone à l'aide d'une mesure à points fixes,2002-11-19,1,"['13.100','25.160.10']",ISO/TC 44/SC 9,9599,,[42193],"['en','fr']",8,"<p>ISO 15011-3 defines a laboratory method for evaluating ozone emissions generated during arc welding by measuring ozone concentrations at fixed poi

35139,IS,,ISO 15011-4:2006,Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 4: Fume data sheets,Hygiène et sécurité en soudage et techniques connexes — Méthode de laboratoire d'échantillonnage des fumées et des gaz — Partie 4: Fiches d'information sur les fumées,2006-03-17,1,"['13.100','25.160.10']",ISO/TC 44/SC 9,9599,,[69598],"['en','fr']",24,"<p>ISO 15011-4:2006 covers health and safety in welding and allied processes.</p><p>ISO 15011-4:2006 specifies requirements for determination of the emission rate and chemical composition of welding fume in order to prepare fume data sheets..</p><p>It applies to all filler materials used for joi

45320,IS,Amd,ISO 15011-4:2006/Amd 1:2008,Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 4: Fume data sheets — Amendment 1,Hygiène et sécurité en soudage et techniques connexes — Méthode de laboratoire d'échantillonnage des fumées et des gaz — Partie 4: Fiches d'information sur les fumées — Amendement 1,2008-12-02,1,"['13.100','25.160.10']",ISO/TC 44/SC 9,9599,,[69598],"['en','fr']",2,

39571,IS,,ISO 15012-1:2004,Health and safety in welding and allied processes — Requirements testing and marking of equipment for air filtration — Part 1: Testing of the separation efficiency for welding fume,"Hygiène et sécurité en soudage et techniques connexes — Exigences, essais et marquage des équipements de filtration d'air — Partie 1: Essai de l'efficacité de la séparation des fumées de soudage",2004-12-08,1,['25.160.30'],ISO/TC 44/SC 9,9599,,[53013],['en'],22,"<p>ISO 15012-1:2004 deals with the significant hazards caused by the emission of welding fume particles from welding fume separation equipment operated according to its intended use and under the conditions foreseen by the manuf

53013,IS,,ISO 15012-1:2013,Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 1: Requirements for testing and marking of separation efficiency,Hygiène et sécurité en soudage et techniques connexes — Équipements de captage et de filtration des fumées de soudage — Partie 1: Exigences pour les essais et marquage relatifs à l'efficacité de la séparation,2013-03-21,2,"['13.100','25.160.30']",ISO/TC 44/SC 9,9599,[39571],[72137],"['en','fr']",14,<p>ISO 15012-1:2013 specifies a method for testing equipment for the separation of welding fume in order to determine whether its separation efficiency meets specified requirements.</p><p>The meth

42810,IS,,ISO 15012-2:2008,"Health and safety in welding and allied processes — Requirements, testing and marking of equipment for air filtration — Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles","Hygiène et sécurité en soudage et techniques connexes — Exigences, essais et marquage des équipements de filtration d'air — Partie 2: Détermination du débit volumique minimal d'air des bouches de captage",2008-03-20,1,"['13.100','25.160.30']",ISO/TC 44/SC 9,9599,,[72139],"['en','fr']",7,"<p>ISO 15012-2:2008 specifies a method for establishing the minimum air volume flow rate required for captor hoods and nozzles to effectively capture fume and gases from weldi

57900,IS,,ISO 15012-4:2016,Health and safety in welding and allied processes — Equipment for capture and separation of welding fume — Part 4: General requirements,Hygiène et sécurité en soudage et techniques connexes — Équipements de captage et de filtration des fumées de soudage — Partie 4: Exigences générales,2016-06-09,1,"['13.100','25.160.30']",ISO/TC 44/SC 9,9599,,[72132],"['en','fr']",12,"<p>ISO 15012-4:2016 defines the general requirements for ventilation equipment used to control exposure to fumes generated by welding and allied processes. It applies to the design and manufacture of all parts of the equipment including hoods, ducting, filter units, air movers, systems that inform of

25582,IS,,ISO 15013:1998,Extruded sheets of polypropylene (PP) — Requirements and test methods,Plaques extrudées en polypropylène (PP) — Prescriptions et méthodes d'essai,1998-12-20,1,['83.140.10'],ISO/TC 61/SC 11,9599,,[42043],"['en','fr']",9,

42043,IS,,ISO 15013:2007,Plastics — Extruded sheets of polypropylene (PP) — Requirements and test methods,Plastiques — Plaques extrudées en polypropylène (PP) — Exigences et méthodes d'essai,2007-10-02,2,['83.140.10'],ISO/TC 61/SC 11,9599,[25582],[81987],"['en','fr']",10,"<p>ISO 15013:2007 specifies the requirements and test methods for solid flat extruded sheets of polypropylene homopolymers (PP‑H) and polypropylene copolymers (PP‑B and PP‑R) without fillers or reinforcing materials. The standard also applies to PP sheet in rolled form. It applies only to thicknesses of 0,5 mm to 40 mm.</p>"

43224,IS,,ISO 15015:2007,"Plastics — Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) — Requirements and test methods","Plastiques — Plaques extrudées en copolymères d'acrylonitrile-styrène modifiés choc (ABS, AEPDS ou ASA) — Exigences et méthodes d'essai",2007-10-02,1,['83.140.10'],ISO/TC 61/SC 11,9599,,"[56472,54742]","['en','fr']",11,"<p>ISO 15015:2007 specifies the requirements and test methods for solid flat extruded sheets of impact-modified acrylonitrile-styrene copolymer materials: acrylonitrile-butadiene-styrene (ABS), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) (commonly known as AES) and acrylonitrile-styrene-acrylate (ASA), wit