Withdrawn and superseded ISO standards — page 46 of 246

35498,IS,,ISO 14788:2005,Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet,Tôles en acier revêtues à chaud en continu d'alliage zinc-aluminium 5 %,2005-06-08,2,['77.140.50'],ISO/TC 17/SC 12,9599,[25552],[53484],['en'],15,"<p>ISO 14788:2005 specifies the minimum requirements for steel sheet, in coils and cut lengths, metallic-coated by the continuous hot-dip process, with zinc-5% aluminium alloy coating.</p>"

53484,IS,,ISO 14788:2011,Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet,Tôles en acier revêtues à chaud en continu d'alliage zinc-aluminium 5 %,2011-01-06,3,['77.140.50'],ISO/TC 17/SC 12,9599,[35498],[70239],"['en','ru']",17,"<p>ISO 14788:2011 is applicable to the minimum requirements for steel sheet, in coils and cut lengths, metallic-coated by the continuous hot-dip process, with zinc-5 % aluminium alloy coating.</p><p>The product is intended for applications requiring corrosion resistance, formability and paintability.</p><p>The steel sheet is produced in a number<b> </b>of qualities and grades, coating mass, surface treatments and coating conditions designed to be compati

6068,IS,,ISO 1479:1983,Hexagon head tapping screws,Vis à tôle à tête hexagonale,1983-08-01,1,['21.060.10'],ISO/TC 2/SC 13,9599,,[54040],"['en','fr']",3,"<p>Specifies the characteristics of screws with thread sizes from ST 2,2, up to and including ST 9,5; includes specifications with reference to International Standards; gives an example for the designation.</p>"

25559,IS,,ISO 14790:1997,Snowboard plate-bindings without a release mechanism — Safety requirements and test methods,Fixations de surf des neiges de type à plaque sans mécanisme de déclenchement — Exigences de sécurité et méthodes d'essai,1997-04-10,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[38628],"['en','fr']",5,

33404,IS,,ISO 14792:2003,Road vehicles — Heavy commercial vehicles and buses — Steady-state circular tests,Véhicules routiers — Véhicules utilitaires lourds et autobus — Essais sur trajectoire circulaire en régime permanent,2003-08-28,1,['43.080.01'],ISO/TC 22,9599,,[57254],"['en','fr']",13,"<p>ISO 14792:2003 specifies tests for determining the steady-state directional control response of heavy vehicles, one of the factors composing vehicle dynamics and road-holding properties. It is applicable to heavy vehicles -- i.e. commercial vehicles, combinations, buses and articulated buses as defined in ISO 3833 -- covered by Categories M3, N2, N3, O3, and O4 of UNECE (United Nations Economic Commis

37149,IS,,ISO 14793:2003,Road vehicles — Heavy commercial vehicles and buses — Lateral transient response test methods,Véhicules routiers — Véhicules utilitaires lourds et autobus — Méthodes d'essai de réponse transitoire latérale,2003-02-24,1,['43.080.01'],ISO/TC 22,9599,,[57255],"['en','fr']",28,"<p>ISO 14793:2003 specifies test methods for determining the transient response behaviour of heavy commercial vehicles, heavy commercial vehicle combinations, buses and articulated buses, as defined in ISO 3833 for trucks and trailers above 3,5 t and buses above 5 t maximum weight and in UNECE (United Nations Economic Commission for Europe) and EC vehicle classification, categories M3, N2, N3, O3

37007,IS,,ISO 14794:2003,Heavy commercial vehicles and buses — Braking in a turn — Open-loop test methods,Véhicules utilitaires lourds et autobus — Freinage en virage — Méthodes d'essai en boucle ouverte,2003-11-07,1,['43.020'],ISO/TC 22,9599,,[57256],"['en','fr']",23,"<p>ISO 14794:2003 specifies open-loop test methods for determining the effect of braking on the course holding and directional behaviour of heavy vehicles or heavy vehicle combinations when braking is accomplished using the service-brake system, or the retarder or engine brake only. It is applicable to heavy vehicles -- i.e. commercial vehicles, commercial vehicle combinations, buses and articulated buses as defined in ISO 383

35183,IS,,ISO 148-1:2006,Metallic materials — Charpy pendulum impact test — Part 1: Test method,Matériaux métalliques — Essai de flexion par choc sur éprouvette Charpy — Partie 1: Méthode d'essai,2006-02-17,1,['77.040.10'],ISO/TC 164/SC 4,9599,"[3733,3977]",[53980],"['en','fr']",20,"<p>ISO 148-1:2006 specifies the Charpy pendulum impact (V-notch and U-notch) test method for determining the energy absorbed in an impact test of metallic materials.</p><p>ISO 148-1:2006 does not address instrumented impact testing, which is specified in ISO 14556:2000.</p>"

53980,IS,,ISO 148-1:2009,Metallic materials — Charpy pendulum impact test — Part 1: Test method,Matériaux métalliques — Essai de flexion par choc sur éprouvette Charpy — Partie 1: Méthode d'essai,2009-11-05,2,['77.040.10'],ISO/TC 164/SC 4,9599,"[35183,46053]",[63802],"['en','fr']",26,"<p>ISO 148-1:2009 specifies the Charpy pendulum impact (V‑notch and U‑notch) test method for determining the energy absorbed in an impact test of metallic materials.</p><p>ISO 148-1:2009 does not apply to instrumented impact testing, which is specified in ISO 14556.</p>"

3977,IS,,ISO 148:1983,Steel — Charpy impact test (V-notch),Acier — Essai de résilience Charpy (entaille en V),1983-05-01,1,['77.040.10'],ISO/TC 164/SC 4,9599,,[35183],"['en','fr']",5,"<p>Specifies the charpy impact method using V-notch test pieces. Determines the impact strength of steel by breaking by one blow from a swinging pendulum, under conditions defined hereafter, a test piece resting on two supports and determining the energy absorbed.</p>"

1741,IS,,ISO 148-2:1998,Metallic materials — Charpy pendulum impact test — Part 2: Verification of test machines,Matériaux métalliques - Essai de flexion par choc sur éprouvette Charpy — Partie 2: Vérification des machines d'essai (mouton-pendule),1998-12-03,1,['77.040.10'],ISO/TC 164/SC 4,9599,,[40548],"['en','fr']",18,

40548,IS,,ISO 148-2:2008,Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines,Matériaux métalliques — Essai de flexion par choc sur éprouvette Charpy — Partie 2: Vérification des machines d'essai (mouton-pendule),2008-12-09,2,['77.040.10'],ISO/TC 164/SC 4,9599,[1741],[63812],"['en','fr']",38,"<p>ISO 148-2:2008 covers the verification of the constructional elements of pendulum-type impact testing machines. It is applicable to machines with 2 mm or 8 mm strikers used for pendulum impact tests carried out, for instance, in accordance with ISO 148-1.</p><p>It can analogously be applied to pendulum impact testing machines of various capacities and of differe

1660,IS,,ISO 148-3:1998,Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V reference test pieces for verification of test machines,Matériaux métalliques — Essai de flexion par choc sur éprouvette Charpy — Partie 3: Préparation et caractérisation des éprouvettes de référence Charpy V pour la vérification des machines d'essai (mouton-pendule),1998-12-03,1,['77.040.10'],ISO/TC 164/SC 4,9599,,[40549],"['en','fr']",11,

40549,IS,,ISO 148-3:2008,Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines,Matériaux métalliques — Essai de flexion par choc sur éprouvette Charpy — Partie 3: Préparation et caractérisation des éprouvettes Charpy à entaille en V pour la vérification indirecte des machines d'essai mouton-pendule,2008-12-09,2,['77.040.10'],ISO/TC 164/SC 4,9599,[1660],[63813],"['en','fr']",19,"<p>ISO 148-3:2008 covers the requirements, preparation and methods for qualifying test pieces used for the indirect verification of pendulum impact testing machines in accordance with ISO 148-2.</p

23531,IS,,ISO 14801:2003,Dentistry — Fatigue test for endosseous dental implants,Art dentaire — Essai de fatigue pour implants dentaires endosseux,2003-05-13,1,['11.060.15'],ISO/TC 106/SC 8,9599,,[41034],"['en','fr']",8,"<p>ISO 14801:2003 specifies a method of fatigue testing of single-post endosseous dental implants of the transmucosal type. It is most useful for comparing endosseous dental implants of different designs or sizes.</p><p>While it simulates the functional loading of an endosseous dental implant body and its premanufactured prosthetic components under worst-case conditions, ISO 14801:2003 is not applicable for predicting the <i>in vivo </i>performance of an endosseous dental im

41034,IS,,ISO 14801:2007,Dentistry — Implants — Dynamic fatigue test for endosseous dental implants,Art dentaire — Implants — Essai de fatigue dynamique pour implants dentaires endosseux,2007-11-06,2,['11.060.15'],ISO/TC 106/SC 8,9599,[23531],[61997],"['en','fr']",9,"<p>ISO 14801:2007 specifies a method of fatigue testing of single post endosseous dental implants of the transmucosal type and their premanufactured prosthetic components. It is most useful for comparing endosseous dental implants of different designs or sizes.</p><p>While it simulates the functional loading of an endosseous dental implant body and its premanufactured prosthetic components under “worst case” conditions, ISO 1480

6070,IS,,ISO 1481:1983,Slotted pan head tapping screws,"Vis à tôle à tête cylindrique large, fendue",1983-08-01,1,['21.060.10'],ISO/TC 2/SC 13,9599,,[54041],"['en','fr']",3,"<p>Specifies the characteristics of screws with thread sizes from ST 2,2 up to and including ST 9,5; includes specifications with reference to International Standards; gives an example for the designation.</p>"

43664,IS,,ISO 14813-1:2007,"Intelligent transport systems — Reference model architecture(s) for the ITS sector — Part 1: ITS service domains, service groups and services","Systèmes intelligents de transport (ITS) — Architecture(s) de modèle de référence pour le secteur ITS — Partie 1: Domaines de service, groupes de service et services ITS",2007-02-02,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,[29533],[57393],['en'],28,"<p>ISO 14813-1:2007 provides a definition of the primary services and application areas that can be provided to Intelligent Transport System (ITS) Users. Those with a common purpose can be collected together in ITS service domains, and within these there can be a number of

57393,IS,,ISO 14813-1:2015,"Intelligent transport systems — Reference model architecture(s) for the ITS sector — Part 1: ITS service domains, service groups and services","Systèmes intelligents de transport (ITS) — Architecture(s) de modèle de référence pour le secteur ITS — Partie 1: Domaines de service, groupes de service et services ITS",2015-09-29,2,"['35.240.60','03.220.01']",ISO/TC 204,9599,[43664],"[81051,75001,85840]",['en'],88,"<p>ISO 14813-1:2015 provides a description of the primary services that an ITS implementation can provide to ITS users. Those services with a common purpose can be collected together in ''ITS service domains'' and within these there can be a number of ''ITS s

46008,IS,,ISO 14813-5:2010,Intelligent transport systems — Reference model architecture(s) for the ITS sector — Part 5: Requirements for architecture description in ITS standards,Systèmes intelligents de transport (ITS) — Architecture(s) de modèle de référence pour le secteur ITS — Partie 5: Exigences pour la description d'architecture dans les normes ITS,2010-06-29,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,[29535],[73746],['en'],31,<p>ISO 14813-5:2010 gives requirements for the description and documentation of the architecture of intelligent transport systems (ITS) in standards dealing with ITS. It also gives the definitions of terms to be used when documenting or referencing aspects of

45939,IS,,ISO 14813-6:2009,Intelligent transport systems — Reference model architecture(s) for the ITS sector — Part 6: Data presentation in ASN.1,Systèmes intelligents de transport (ITS) — Architecture(s) de modèle de référence pour le secteur ITS — Partie 6: Présentation de données dans ASN.1,2009-09-03,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,[30622],[69109],['en'],15,"<p>ISO 14813-6:2009 provides an 'enabling' structure for use in the ITS sector. It provides a formal means to enact the ISO/TC 204 decision by resolution to use ASN.1 for data definitions within ITS International Standards. This provides a common message form to enable interoperability and reuse. It provides consistenc

36030,IS,,ISO 14817:2002,Transport information and control systems — Requirements for an ITS/TICS central Data Registry and ITS/TICS Data Dictionaries,Systèmes d'information et de commande des transports — Exigences pour un registre de données central ITS/TICS et pour les dictionnaires de données ITS/TICS,2002-12-11,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,"[65668,65669]",['en'],92,"<p>ISO 14817:2002 specifies the framework, formats, and procedures used to define information exchanges within the Intelligent Transport System/Transport Information and Control Systems (ITS/TICS) sector. It defines the content of the ITS/TICS central Data Registry and Data Dictionaries, the registration pr

36922,IS,,ISO 14819-1:2003,Traffic and Traveller Information (TTI) — TTI messages via traffic message coding — Part 1: Coding protocol for Radio Data System — Traffic Message Channel (RDS-TMC) using ALERT-C,Informations sur le trafic et le tourisme (TTI) — Messages TTI via le codage de messages sur le trafic — Partie 1: Protocole de codage pour le système de radiodiffusion de données (RDS) — Canal de messages d'informations sur le trafic (RDS-TMC) avec Alert-C,2003-05-28,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[59230],['en'],37,"<p>ISO 14819-1:2003 specifies the coding protocol for Radio Data System - Traffic Message Channel (RDS-TMC) - RDS-TMC using the ALERT-C protocol that is desig

59230,IS,,ISO 14819-1:2013,Intelligent transport systems — Traffic and travel information messages via traffic message coding — Part 1: Coding protocol for Radio Data System — Traffic Message Channel (RDS-TMC) using ALERT-C,Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le codage de messages sur le trafic — Partie 1: Protocole de codage pour le système de radiodiffusion de données (RDS) — Canal de messages d'informations sur le trafic (RDS-TMC) avec ALERT-C,2013-11-21,2,"['35.240.60','03.220.20']",ISO/TC 204,9599,[36922],[76781],"['en','fr','ru']",43,<p>ISO 14819-1:2013 describes the ALERT-C protocol concept and message structure used to achieve densely co

29536,IS,,ISO 14819-2:2003,Traffic and Traveller Information (TTI) — TTI messages via traffic message coding — Part 2: Event and information codes for Radio Data System — Traffic Message Channel (RDS-TMC),Informations sur le trafic et le tourisme (TTI) — Messages TTI via le codage de messages sur le trafic — Partie 2: Codes d'événements et d'informations pour le système de radiodiffusion de données (RDS) — Canal de messages d'informations sur le trafic (RDS-TMC),2003-05-28,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[59231],['en'],139,<p>ISO 14819-2:2003 describes the ALERT-C protocol concept and message structure used to achieve densely coded messages to be carried in the RDS-TMC feature

59231,IS,,ISO 14819-2:2013,Intelligent transport systems — Traffic and travel information messages via traffic message coding — Part 2: Event and information codes for Radio Data System — Traffic Message Channel (RDS-TMC) using ALERT-C,Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le codage de messages sur le trafic — Partie 2: Codes d'événements et d'informations pour le système de radiodiffusion de données (RDS) — Canal de messages d'informations sur le trafic (RDS-TMC) avec ALERT-C,2013-11-21,2,"['35.240.60','03.220.20']",ISO/TC 204,9599,[29536],[76782],"['en','fr','ru']",141,<p>ISO 14819-1:2013 describes the ALERT-C protocol concept and message struct

35984,IS,,ISO 14819-3:2004,Traffic and Travel Information (TTI) — TTI messages via traffic message coding — Part 3: Location referencing for ALERT-C,Informations sur le trafic et le tourisme (TTI) — Messages TTI via le codage de messages sur le trafic — Partie 3: Références de localisants pour ALERT-C,2004-03-01,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,[31127],[59232],"['en','fr']",34,"<p>ISO 14819-3:2004 primarily addresses the needs of RDS-TMC ALERT-C messages, which are already being implemented. However, the modular approach used here is intended to facilitate future extension of the location referencing rules to other traffic and travel messaging systems.</p><p>The location referen

59232,IS,,ISO 14819-3:2013,Intelligent transport systems — Traffic and travel information messages via traffic message coding — Part 3: Location referencing for Radio Data System — Traffic Message Channel (RDS-TMC) using ALERT-C,Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le codage de messages sur le trafic — Partie 3: Références de localisants pour le système de radiodiffusion de données (RDS) — Canal de messages d'informations sur le trafic (RDS-TMC) avec ALERT-C,2013-11-21,2,"['35.240.60','03.220.20']",ISO/TC 204,9599,[35984],[76783],"['en','fr','ru']",67,"<p>ISO 14819-3:2013 sets out ways of specifying places and positions in traffic and travel info

37267,IS,,ISO 14819-6:2006,Traffic and Traveller Information (TTI) — TTI messages via traffic message coding — Part 6: Encryption and conditional access for the Radio Data System — Traffic Message Channel ALERT C coding,Informations sur le trafic et le tourisme (TTI) — Messages TTI via le codage de messages sur le trafic — Partie 6: Accès au cryptage et accès conditionnel pour le système de radiodiffusion de données — Codage ALERT C du canal de messages sur le trafic,2006-04-07,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[76784],"['en','fr']",19,"<p>ISO 14819-6:2006 establishes a method of encrypting certain elements of the ALERT-C coded data carried in the RDS-TMC type 8A data group, suc

6071,IS,,ISO 1482:1983,Slotted countersunk (flat) head tapping screws (common head style),"Vis à tôle à tête fraisée, fendue",1983-09-01,1,['21.060.10'],ISO/TC 2/SC 13,9599,,[54042],"['en','fr']",3,"<p>Specifies the characteristics of screws with thread sizes from ST 2,2 up to and including ST 9,5; includes specifications with reference to international Standards; gives an example for the designation.</p>"

61546,IS,,ISO 14823:2017,Intelligent transport systems — Graphic data dictionary,Systèmes de transport intelligents — Dictionnaire de données graphiques,2017-05-17,1,"['35.240.60','43.040.15']",ISO/TC 204,9599,[43456],[76963],"['en','fr']",41,"<p>ISO14823:2017 specifies a graphic data dictionary, a system of standardized codes for existing road traffic signs and pictograms used to deliver Traffic and Traveller Information (TTI). The coding system can be used in the formation of messages within intelligent transport systems.</p>"

30763,IS,,ISO 14825:2004,Intelligent transport systems — Geographic Data Files (GDF) — Overall data specification,Systèmes intelligents de transport (SIT) — Fichiers de données géographiques (GDF) — Spécification des données globales,2004-02-03,1,"['35.240.60','03.220.01','35.240.70']",ISO/TC 204,9599,[25627],[54610],['en'],590,"<p>ISO 14825:2004 specifies the conceptual and logical data model and the exchange format for geographic data bases for Intelligent Transportation System (ITS) applications. It includes a specification of potential contents of such data bases (features, attributes and relationships), a specification of how these contents shall be represented, and of how relevant info

54610,IS,,ISO 14825:2011,Intelligent transport systems — Geographic Data Files (GDF) — GDF5.0,Systèmes intelligents de transport — Fichiers de données géographiques (GDF) — GDF5.0,2011-07-08,2,"['35.240.60','03.220.01','35.240.70']",ISO/TC 204,9599,[30763],"[68244,72494]",['en'],1231,"<p>ISO 14825:2011 specifies the conceptual and logical data model and physical encoding formats for geographic databases for Intelligent Transport Systems (ITS) applications and services. It includes a specification of potential contents of such databases (data dictionaries for Features, Attributes and Relationships), a specification of how these contents shall be represented, and of how relevant information ab

41362,IS,,ISO 14827-2:2005,Transport information and control systems — Data interfaces between centres for transport information and control systems — Part 2: DATEX-ASN,Systèmes de commande et d'information des transports — Interfaces de données entre les centres pour systèmes de commande et d'information des transports — Partie 2: DATEX-ASN,2005-11-09,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[81957],['en'],63,"<p>ISO 14827-1:2005 allows different systems to exchange relevant data. The relevant data will be contained in end-application messages. Each end-application message will be formally defined as either a 'subscription' or a 'publication', according to the format as specified in I

6072,IS,,ISO 1483:1983,Slotted raised countersunk (oval) head tapping screws (common head style),"Vis à tôle à tête fraisée bombée, fendue",1983-09-01,1,['21.060.10'],ISO/TC 2/SC 13,9599,,[54043],"['en','fr']",3,"<p>Specifies the characteristics of screws with thread sizes from ST 2,2 up to and including ST 9,5; includes specifications with reference to International Standards; gives an example for the designation.</p>"

33760,IS,,ISO 14835-1:2005,Mechanical vibration and shock — Cold provocation tests for the assessment of peripheral vascular function — Part 1: Measurement and evaluation of finger skin temperature,Vibrations et chocs mécaniques — Essais de provocation à froid pour l'évaluation de la fonction vasculaire périphérique — Partie 1: Mesurage et évaluation de la température de la peau des doigts,2005-07-11,1,['13.160'],ISO/TC 108/SC 4,9599,,[69973],"['en','fr']",10,"<p>ISO 14835-1:2005 specifies the methods for measuring the finger skin temperature (FST), the procedures for conducting the measurements (including the performance of cold provocation tests), and how to report the measurement results.

25726,IS,,ISO 14839-1:2002,Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 1: Vocabulary,Vibrations mécaniques — Vibrations de machines rotatives équipées de paliers magnétiques actifs — Partie 1: Vocabulaire,2002-05-30,1,"['01.040.17','17.160']",ISO/TC 108/SC 2,9599,,[68127],"['en','fr']",30,

54387,IS,Amd,ISO 14839-1:2002/Amd 1:2010,Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 1: Vocabulary — Amendment 1,Vibrations mécaniques — Vibrations de machines rotatives équipées de paliers magnétiques actifs — Partie 1: Vocabulaire — Amendement 1,2010-10-26,1,"['01.040.17','17.160']",ISO/TC 108/SC 2,9599,,[68127],"['en','fr']",3,

31750,IS,,ISO 14850-1:2004,Nuclear energy — Waste-packages activity measurement — Part 1: High-resolution gamma spectrometry in integral mode with open geometry,Énergie nucléaire — Mesurage de l'activité de colis de déchets- — Partie 1: Spectrométrie gamma haute résolution en mode intégral et géométrie ouverte,2004-05-17,1,"['17.240','13.030.30']",ISO/TC 85/SC 5,9599,,[63746],"['en','fr']",20,"<p>ISO 14850:2004 describes a procedure for measurements of gamma-emitting radionuclide activity in homogeneous objects such as unconditioned waste (including process waste, dismantling waste, etc.), waste conditioned in various matrices (bitumen, hydraulic binder, thermosetting resins, etc.), notably

25765,IS,,ISO 14851:1999,Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer,Évaluation de la biodégradabilité aérobie ultime des matériaux plastiques en milieu aqueux — Méthode par détermination de la demande en oxygène dans un respiromètre fermé,1999-05-20,1,['83.080.01'],ISO/TC 61/SC 14,9599,,[70026],"['en','fr']",22,

42153,IS,Cor,ISO 14851:1999/Cor 1:2005,Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer — Technical Corrigendum 1,Évaluation de la biodégradabilité aérobie ultime des matériaux plastiques en milieu aqueux — Méthode par détermination de la demande en oxygène dans un respiromètre fermé — Rectificatif technique 1,2005-05-25,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[70026],"['en','fr']",1,

25766,IS,,ISO 14852:1999,Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide,Évaluation de la biodégradabilité aérobie ultime des matériaux plastiques en milieu aqueux — Méthode par analyse du dioxyde de carbone libéré,1999-05-20,1,['83.080.01'],ISO/TC 61/SC 14,9599,,[72051],"['en','fr']",18,

42154,IS,Cor,ISO 14852:1999/Cor 1:2005,Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide — Technical Corrigendum 1,Évaluation de la biodégradabilité aérobie ultime des matériaux plastiques en milieu aqueux — Méthode par analyse du dioxyde de carbone libéré — Rectificatif technique 1,2005-05-25,1,['83.080.01'],ISO/TC 61/SC 14,9599,,[72051],"['en','fr']",1,

72051,IS,,ISO 14852:2018,Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide,Évaluation de la biodégradabilité aérobie ultime des matériaux plastiques en milieu aqueux — Méthode par analyse du dioxyde de carbone libéré,2018-08-24,2,['83.080.01'],ISO/TC 61/SC 14,9599,"[25766,42154]",[80303],"['en','fr']",19,"<p>This document specifies a method, by measuring the amount of carbon dioxide evolved, for the determination of the degree of aerobic biodegradability of plastic materials, including those containing formulation additives. The test material is exposed in a synthetic medium under standardized labor

40599,IS,,ISO 14853:2005,Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production,Plastiques — Évaluation de la biodégradabilité anaérobie ultime des matériaux plastiques en milieu aqueux — Méthode par détermination de la production de biogaz,2005-02-02,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[67804],"['en','fr']",28,"<p>ISO 14853:2005 specifies a method for the determination of the ultimate anaerobic biodegradability of plastics by anaerobic microorganisms. The conditions described in the standard do not necessarily correspond to the optimum conditions for the maximum degree of biodegradation to occ

54355,IS,Cor,ISO 14853:2005/Cor 1:2009,Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production — Technical Corrigendum 1,Plastiques — Évaluation de la biodégradabilité anaérobie ultime des matériaux plastiques en milieu aqueux — Méthode par détermination de la production de biogaz — Rectificatif technique 1,2009-05-22,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[67804],"['en','fr']",1,

42155,IS,,ISO 14855-1:2005,Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method,Évaluation de la biodégradabilité aérobie ultime des matériaux plastiques dans des conditions contrôlées de compostage — Méthode par analyse du dioxyde de carbone libéré — Partie 1: Méthode générale,2005-10-28,1,['83.080.01'],ISO/TC 61/SC 5,9599,"[25769,40357]",[57902],"['en','fr']",21,"<p>ISO 14855-1:2005 specifies a method for the determination of the ultimate aerobic biodegradability of plastics, based on organic compounds, under controlled composting conditions by measurement o

54351,IS,Cor,ISO 14855-1:2005/Cor 1:2009,Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method — Technical Corrigendum 1,Évaluation de la biodégradabilité aérobie ultime des matériaux plastiques dans des conditions contrôlées de compostage — Méthode par analyse du dioxyde de carbone libéré — Partie 1: Méthode générale — Rectificatif technique 1,2009-05-22,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[57902],"['en','fr']",1,

25769,IS,,ISO 14855:1999,Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide,Évaluation de la biodégradabilité aérobie ultime et de la désintégration des matériaux plastiques dans des conditions contrôlées de compostage — Méthode par analyse du dioxyde de carbone libéré,1999-05-20,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[42155],"['en','fr']",17,

40357,IS,Amd,ISO 14855:1999/Amd 1:2004,Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Amendment 1: Use of activated vermiculite instead of mature compost,Évaluation de la biodégradabilité aérobie ultime et de la désintégration des matériaux plastiques dans des conditions contrôlées de compostage — Méthode par analyse du dioxyde de carbone libéré — Amendement 1: Utilisation de vermiculite activée à la place de compost mature,2004-10-12,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[42155],"['en','fr']",4,

40617,IS,,ISO 14855-2:2007,Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test,Détermination de la biodégradabilité aérobie ultime des matériaux plastiques dans des conditions contrôlées de compostage — Méthode par analyse du dioxyde de carbone libéré — Partie 2: Mesurage gravimétrique du dioxyde de carbone libéré lors d'un essai de laboratoire,2007-08-28,1,['83.080.01'],ISO/TC 61/SC 14,9599,,[72046],"['en','fr']",15,"<p>ISO 14855-2:2007 specifies a method for determining the ultimate aerobic biode

54131,IS,Cor,ISO 14855-2:2007/Cor 1:2009,Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test — Technical Corrigendum 1,Détermination de la biodégradabilité aérobie ultime des matériaux plastiques dans des conditions contrôlées de compostage — Méthode par analyse du dioxyde de carbone libéré — Partie 2: Mesurage gravimétrique du dioxyde de carbone libéré lors d'un essai de laboratoire — Rectificatif technique 1,2009-04-16,1,['83.080.01'],ISO/TC 61/SC 14,9599,,[72046],['en'],1,

25801,IS,,ISO 14865:1998,Machinery for forestry — Portable hand-held brush-cutters and grass-trimmers with backpack-mounted combustion-engine power source — Safety requirements and testing,Matériel forestier — Débroussailleuses et coupe-herbe portatifs équipés d'une source motrice portée à dos à moteur à combustion interne — Exigences de sécurité et essais,1998-04-02,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[51136],"['en','fr']",17,

25330,IS,,ISO 14879-1:2000,Implants for surgery — Total knee-joint prostheses — Part 1: Determination of endurance properties of knee tibial trays,Implants chirurgicaux — Prothèses totales de l'articulation du genou — Partie 1: Détermination des propriétés d'endurance des embases tibiales,2000-05-18,1,['11.040.40'],ISO/TC 150/SC 4,9599,,[72356],"['en','fr']",7,

21141,IS,,ISO 14880-1:2001,Optics and photonics — Microlens arrays — Part 1: Vocabulary,Optique et photonique — Réseaux de microlentilles — Partie 1: Vocabulaire,2001-08-23,1,"['31.260','01.040.31']",ISO/TC 172/SC 9,9599,,[64144],"['en','fr']",13,

38893,IS,Cor,ISO 14880-1:2001/Cor 1:2003,Optics and photonics — Microlens arrays — Part 1: Vocabulary — Technical Corrigendum 1,Optique et photonique — Réseaux de microlentilles — Partie 1: Vocabulaire — Rectificatif technique 1,2003-07-21,1,"['31.260','01.040.31']",ISO/TC 172/SC 9,9599,,[64144],"['en','fr']",2,

42724,IS,Cor,ISO 14880-1:2001/Cor 2:2005,Optics and photonics — Microlens arrays — Part 1: Vocabulary — Technical Corrigendum 2,Optique et photonique — Réseaux de microlentilles — Partie 1: Vocabulaire — Rectificatif technique 2,2005-07-26,1,"['31.260','01.040.31']",ISO/TC 172/SC 9,9599,,[64144],"['en','fr']",2,

64144,IS,,ISO 14880-1:2016,Optics and photonics — Microlens arrays — Part 1: Vocabulary and general properties,Optique et photonique — Réseaux de microlentilles — Partie 1: Vocabulaire et propriétés générales,2016-03-22,2,"['31.260','01.040.31']",ISO/TC 172/SC 9,9599,"[38893,21141,42724]",[72947],"['en','fr']",19,<p>ISO 14880-1:2016 defines terms for microlens arrays. It applies to microlens arrays which consist of arrays of very small lenses formed inside or on one or more surfaces of a common substrate and systems. The aim of ISO 14880-1:2016 is to improve the compatibility and interchangeability of lens arrays from different suppliers and to enhance the development of technology using mic

34200,IS,,ISO 14880-2:2006,Optics and photonics — Microlens arrays — Part 2: Test methods for wavefront aberrations,Optique et photonique — Réseaux de microlentilles — Partie 2: Méthodes d'essai pour les aberrations du front d'onde,2006-01-30,1,['31.260'],ISO/TC 172/SC 9,9599,,[83940],"['en','fr']",25,<p>ISO 14880-2:2006 specifies methods for testing wavefront aberrations for microlenses within microlens arrays. It is applicable to microlens arrays with very small lenses formed inside or on one or more surfaces of a common substrate. </p>

36641,IS,,ISO 14880-3:2006,Optics and photonics — Microlens arrays — Part 3: Test methods for optical properties other than wavefront aberrations,Optique et photonique — Réseaux de microlentilles — Partie 3: Méthodes d'essai pour les propriétés optiques autres que les aberrations du front d'onde,2006-05-19,1,['31.260'],ISO/TC 172/SC 9,9599,,[83941],"['en','fr']",14,"<p>ISO 14880-3:2006 specifies methods for testing optical properties, other than wavefront aberrations, of microlenses in microlens arrays. It is applicable to microlens arrays with very small lenses formed on one or more surfaces of a common substrate and to graded index microlenses.</p>"

36642,IS,,ISO 14880-4:2006,Optics and photonics — Microlens arrays — Part 4: Test methods for geometrical properties,Optique et photonique — Réseaux de microlentilles — Partie 4: Méthodes d'essai pour les propriétés géométriques,2006-05-19,1,['31.260'],ISO/TC 172/SC 9,9599,,[83942],"['en','fr']",22,<p>ISO 14880-4:2006 specifies methods for testing geometrical properties of microlenses in microlens arrays. It is applicable to microlens arrays with very small lenses formed on one or more surfaces of a common substrate and to graded index microlenses. </p>

25825,IS,,ISO 14881:2001,Integrated optics — Interfaces — Parameters relevant to coupling properties,Optique intégrée — Interfaces — Paramètres caractérisant les propriétés de couplage,2001-06-28,1,['31.260'],ISO/TC 172/SC 9,9599,,[72974],"['en','fr']",6,

23742,IS,,ISO 14889:1997,Ophthalmic optics — Spectacle lenses — Fundamental requirements for uncut finished lenses,Optique ophtalmique — Verres de lunettes — Exigences fondamentales relatives aux verres finis non détourés,1997-07-24,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[31595],"['en','fr']",5,

31595,IS,,ISO 14889:2003,Ophthalmic optics — Spectacle lenses — Fundamental requirements for uncut finished lenses,Optique ophtalmique — Verres de lunettes — Exigences fondamentales relatives aux verres finis non détourés,2003-05-16,2,['11.040.70'],ISO/TC 172/SC 7,9599,[23742],[58078],"['en','fr']",7,"<p>ISO 14889:2002 specifies fundamental requirements for uncut finished<i> </i>spectacle lenses. This International Standard is not applicable to protective spectacle lenses.</p><p>ISO 14889:2002 takes precedence over the corresponding requirements of other standards, if differences exist.</p>"

58078,IS,,ISO 14889:2013,Ophthalmic optics — Spectacle lenses — Fundamental requirements for uncut finished lenses,Optique ophtalmique — Verres de lunettes — Exigences fondamentales relatives aux verres finis non détourés,2013-09-11,3,['11.040.70'],ISO/TC 172/SC 7,9599,[31595],[86730],"['en','fr']",6,"<p>ISO 14889:2013 specifies fundamental requirements for uncut finished spectacle lenses. It is not applicable to protective spectacle lenses.</p><p>ISO 14889:2013 takes precedence over the corresponding requirements of other standards, if differences exist.</p>"

72292,IS,Amd,ISO 14889:2013/Amd 1:2017,Ophthalmic optics — Spectacle lenses — Fundamental requirements for uncut finished lenses — Amendment 1,Optique ophtalmique — Verres de lunettes — Exigences fondamentales relatives aux verres finis non détourés — Amendement 1,2017-11-01,3,['11.040.70'],ISO/TC 172/SC 7,9599,,[86730],"['en','fr']",1,

25868,IS,,ISO 14890:2003,Conveyor belts — Specification for rubber or plastics covered conveyor belts of textile construction for general use,"Courroies transporteuses — Spécification pour courroies transporteuses recouvertes de caoutchouc ou de plastique à structure textile, d'usage général",2003-05-13,1,['53.040.20'],ISO/TC 41/SC 3,9599,"[4198,4148]","[45314,61047]","['en','fr']",19,<p>ISO 14890:2003 specifies requirements for rubber and/or plastics covered conveyor belting of textile construction for general surface use on flat or troughed idlers. It is not suitable or valid for light conveyor belts as described in EN 873.</p>

45019,IS,Cor,ISO 14890:2003/Cor 1:2006,Conveyor belts — Specification for rubber or plastics covered conveyor belts of textile construction for general use — Technical Corrigendum 1,"Courroies transporteuses — Spécification pour courroies transporteuses recouvertes de caoutchouc ou de plastique à structure textile, d'usage général — Rectificatif technique 1",2006-11-22,1,['53.040.20'],ISO/TC 41/SC 3,9599,,[61047],"['en','fr']",1,

61047,IS,,ISO 14890:2013,Conveyor belts — Specification for rubber- or plastics-covered conveyor belts of textile construction for general use,"Courroies transporteuses — Spécification pour courroies transporteuses recouvertes de caoutchouc ou de plastique à structure textile, d'usage général",2013-02-15,2,['53.040.20'],ISO/TC 41/SC 3,9599,"[45019,25868]",[88543],"['en','fr']",15,"<p>ISO 14890:2013 specifies requirements for rubber and/or plastics covered conveyor belting of textile construction for general surface use on flat or troughed idlers.</p><p>ISO 14890:2013 is not suitable or valid for light conveyor belts as described in ISO 21183-1.</p><p>Items that are not requirements of ISO 14

25875,IS,,ISO 14895:2000,Small craft — Liquid-fuelled galley stoves,Petits navires — Réchauds de cuisine alimentés par combustible liquide,2000-12-21,1,['47.080'],ISO/TC 188,9599,,[61102],"['en','fr']",6,

25884,IS,,ISO 14896:2000,Plastics — Polyurethane raw materials — Determination of isocyanate content,Plastiques — Matières premières des polyuréthannes — Détermination de la teneur en isocyanate,2000-08-31,1,['83.080.10'],ISO/TC 61/SC 12,9599,[25518],[43617],"['en','fr']",9,

42450,IS,Cor,ISO 14896:2000/Cor 1:2005,Plastics — Polyurethane raw materials — Determination of isocyanate content — Technical Corrigendum 1,Plastiques — Matières premières des polyuréthannes — Détermination de la teneur en isocyanate — Rectificatif technique 1,2005-06-10,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[43617],['en'],1,

43617,IS,,ISO 14896:2006,Plastics — Polyurethane raw materials — Determination of isocyanate content,Plastiques — Matières premières des polyuréthannes — Détermination de la teneur en isocyanate,2006-06-12,2,['83.080.10'],ISO/TC 61/SC 12,9599,"[25884,42450]",[50601],['en'],9,"<p>ISO 14896:2006 specifies two methods for the measurement of the isocyanate content of aromatic isoocyanates used as polyurethane raw materials. Method A is primarily applicable to refined toluene diisocyanate (TDI), methylene-<i>bis</i>-(4-phenylisocyanate) (MDI) and their prepolymers. Method B is applicable to refined, crude or modified isocyanates derived from toluene diisocyanate, methylene-<i>bis</i>-(4-phenyliso

45081,IS,Amd,ISO 14896:2006/Amd 1:2007,Plastics — Polyurethane raw materials — Determination of isocyanate content — Amendment 1: Acceptable variations in the procedure for method B,Plastiques — Matières premières des polyuréthannes — Détermination de la teneur en isocyanate — Amendement 1: Variantes acceptables du mode opératoire pour la méthode B,2007-08-06,2,['83.080.10'],ISO/TC 61/SC 12,9599,,[50601],['en'],1,

25885,IS,,ISO 14897:2000,Plastics — Polyols for use in the production of polyurethane — Determination of water content,Plastiques — Polyols pour la production du polyuréthanne — Dosage de l'eau,2000-07-20,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[34859],"['en','fr']",7,

34859,IS,,ISO 14897:2002,Plastics — Polyols for use in the production of polyurethane — Determination of water content,Plastiques — Polyols pour la production du polyuréthanne — Dosage de l'eau,2002-06-13,2,['83.080.10'],ISO/TC 61/SC 12,9599,[25885],[85621],['en'],8,"<p>ISO 14897 specifies methods used to measure the water content of polyols employed as polyurethane raw materials. Method A is a manual amperometric method which has been included to better define the principles of the Karl Fischer measurement. Amperometric methods are applicable to a wide range of polyols, including those which have enough colour to obscure a visual end-point. Method B includes an automated amperometric proced

25887,IS,,ISO 14899:2001,Plastics — Polyols for use in the production of polyurethane — Determination of basicity,Plastiques — Polyols pour la production du polyuréthanne — Détermination de la basicité,2001-02-08,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[84166],"['en','fr']",5,"<p>This International Standard specifies a method for the measurement of trace amounts of basic materials present in</p><p>polyether polyols used in the production of polyurethanes. It is important to know the trace amount of basicity in a</p><p>polyol to prevent gelation of the reaction mass during the production of polyurethane prepolymers. It is also useful</p><p>to control the basicity in polyols used for polyurethan

25888,IS,,ISO 14900:2001,Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number,Plastiques — Polyols pour la production du polyuréthanne — Détermination de l'indice d'hydroxyle,2001-02-08,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[72375],"['en','fr']",11,

43238,IS,Cor,ISO 14900:2001/Cor 1:2005,Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number — Technical Corrigendum 1,Plastiques — Polyols pour la production du polyuréthanne — Détermination de l'indice d'hydroxyle — Rectificatif technique 1,2005-09-20,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[72375],"['en','fr']",1,

72375,IS,,ISO 14900:2017,Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number,Plastiques — Polyols pour la production du polyuréthanne — Détermination de l'indice d'hydroxyle,2017-03-02,2,['83.080.10'],ISO/TC 61/SC 12,9599,"[25888,43238]",[85615],['en'],12,"<p>ISO 14900:2017 specifies two methods for the measurement of the hydroxyl number of polyols used as polyurethane raw materials. It is necessary to know the hydroxyl content of polyols to properly formulate polyurethane systems. Method A is primarily applicable to readily esterified polyether polyols. It is also intended for polyols which have significant steric hindrance, such as those based on

55263,IS,,ISO 14903:2012,Refrigerating systems and heat pumps — Qualification of tightness of components and joints,Systèmes de réfrigération et pompes à chaleur — Qualification de l'étanchéité des composants et des joints,2012-11-06,1,"['27.200','27.080']",ISO/TC 86/SC 1,9599,,[67553],['en'],34,"<p>The requirements contained in ISO 14903:2012 are applicable to joints of maximum DN 50 and components of maximum 5 l and maximum mass of 50 kg.</p><p>ISO 14903:2012 is intended to describe the qualification procedure for type approval of the tightness of components, joints and parts used in refrigerating systems and heat pumps as described in ISO 5149. It characterizes the joint tightness and str

67553,IS,,ISO 14903:2017,Refrigerating systems and heat pumps — Qualification of tightness of components and joints,Systèmes de réfrigération et pompes à chaleur — Qualification de l'étanchéité des composants et des joints,2017-07-12,2,"['27.200','27.080']",ISO/TC 86/SC 1,9599,[55263],[86750],"['en','fr']",34,"<p>ISO 14903:2017 provides the qualification procedure for type approval of the tightness of hermetically sealed and closed components, joints and parts used in refrigerating systems and heat pumps as described in relevant parts of ISO 5149. The sealed and closed components, joints and parts concerned are, in particular, fittings, bursting discs, flanged or fitted assemblies. The tight

35987,IS,,ISO 14906:2004,Road transport and traffic telematics — Electronic fee collection — Application interface definition for dedicated short-range communication,Télématique de la circulation et du transport routier — Perception du télépéage — Définition de l'interface d'application relative aux communications dédiées à courte portée,2004-09-16,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,[25217],[52287],['en'],111,"<p>ISO 14906:2004 specifies the application interface in the context of Electronic Fee Collection (EFC) systems using the Dedicated Short-Range communication (DSRC). The EFC application interface is the EFC application process interface to the DSRC Application Layer. </p><p>

52287,IS,,ISO 14906:2011,Electronic fee collection — Application interface definition for dedicated short-range communication,Perception du télépéage — Définition de l'interface d'application relative aux communications dédiées à courte portée,2011-10-06,2,"['35.240.60','03.220.20']",ISO/TC 204,9599,[35987],"[72124,64746]","['en','fr']",113,<p>ISO 14906:2011 specifies the application interface in the context of electronic fee collection (EFC) systems using the dedicated short-range communication (DSRC).</p>

64757,IS,Amd,ISO 14906:2011/Amd 1:2015,Electronic fee collection — Application interface definition for dedicated short-range communication — Amendment 1,Perception du télépéage — Définition de l'interface d'application relative aux communications dédiées à courte portée — Amendement 1,2015-07-09,2,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[72124],"['en','fr']",25,

63684,IS,Cor,ISO 14906:2011/Cor 1:2013,Electronic fee collection — Application interface definition for dedicated short-range communication — Technical Corrigendum 1,Perception du télépéage — Définition de l'interface d'application relative aux communications dédiées à courte portée — Rectificatif technique 1,2013-03-19,2,"['35.240.60','03.220.20']",ISO/TC 204,9599,,"[72124,64746]","['en','fr']",8,

72124,IS,,ISO 14906:2018,Electronic fee collection — Application interface definition for dedicated short-range communication,Perception du télépéage — Définition de l'interface d'application relative aux communications dédiées à courte portée,2018-10-31,3,"['35.240.60','03.220.20']",ISO/TC 204,9599,"[64757,63684,52287]",[82931],"['en','fr']",123,<p>This document specifies the application interface in the context of electronic fee collection (EFC) systems using the dedicated short-range communication (DSRC).</p>

78353,IS,Amd,ISO 14906:2018/Amd 1:2020,Electronic fee collection — Application interface definition for dedicated short-range communication — Amendment 1,Perception du télépéage — Définition de l'interface d'application relative aux communications dédiées à courte portée — Amendement 1,2020-03-26,3,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[82931],"['en','fr']",4,

25906,IS,,ISO 14910-1:1997,Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion — Part 1: Designation system and basis for specifications,"Plastiques — Élastomères thermoplastiques à base de polyester/ester et polyéther/ester, pour moulage et extrusion — Partie 1: Système de désignation et base de spécification",1997-12-25,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[43495],"['en','fr']",8,

43495,IS,,ISO 14910-1:2013,Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion — Part 1: Designation system and basis for specification,"Plastiques — Élastomères thermoplastiques à base de polyester/ester et polyéther/ester, pour moulage et extrusion — Partie 1: Système de désignation et base de spécification",2013-02-26,2,['83.080.20'],ISO/TC 61/SC 9,9599,[25906],[66868],"['en','fr','ru']",9,"<p>ISO 14910-1:2013 establishes a system of designation for thermoplastic polyester/ester and polyether/ester elastomers, which may be used as the basis for specifications.</p><p>The types of thermoplastic polyester/ester and polyether/ester elastomer are

25907,IS,,ISO 14910-2:1997,Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties,"Plastiques — Élastomères thermoplastiques à base de polyester/ester et polyéther/ester, pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés",1997-12-25,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[43884],"['en','fr']",5,

43884,IS,,ISO 14910-2:2013,Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties,"Plastiques — Élastomères thermoplastiques à base de polyester/ester et polyéther/ester, pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés",2013-02-26,2,['83.080.20'],ISO/TC 61/SC 9,9599,[25907],[66869],"['en','fr','ru']",14,<p>ISO 14910-2:2013 specifies the methods of preparation of test specimens and the standard test methods to be used in determining the properties of thermoplastic polyester/ester and polyether/ester moulding and extrusion materia

25214,IS,,ISO 14912:2003,Gas analysis — Conversion of gas mixture composition data,Analyse des gaz — Conversion des données de composition de mélanges gazeux,2003-03-03,1,['71.040.40'],ISO/TC 158,9599,,"[85580,69476]",['en'],58,"<p>ISO 14912:2003 defines the following quantities commonly used to express the composition of gas mixtures: mole fraction, mass fraction and volume fraction, as well as mole concentration, mass concentration and volume concentration.</p><p>Relating to these quantities of composition, ISO 14912:2003 provides methods for the conversion between different quantities and the conversion between different state conditions. Conversion between different quantities means calc

44639,IS,Cor,ISO 14912:2003/Cor 1:2006,Gas analysis — Conversion of gas mixture composition data — Technical Corrigendum 1,Analyse des gaz — Conversion des données de composition de mélanges gazeux — Rectificatif technique 1,2006-08-08,1,['71.040.40'],ISO/TC 158,9599,,"[85580,69476]",['en'],5,

28583,IS,,ISO 14915-2:2003,Software ergonomics for multimedia user interfaces — Part 2: Multimedia navigation and control,Ergonomie des logiciels pour les interfaces utilisateur multimédias — Partie 2: Navigation et contrôle multimédias,2003-07-25,1,"['35.200','13.180']",ISO/TC 159/SC 4,9599,,[80773],"['en','fr']",33,"<p>ISO 14915-2:2003 provides recommendations and requirements for the design of multimedia user interfaces with respect to the following aspects: design of the organization of the content, navigation and media-control issues. ISO 14915-2:2003 is limited to the design of the organization of the content and does not deal with the design of the content in general. Design issues wi

23987,IS,,ISO 14916:1999,Thermal spraying — Determination of tensile adhesive strength,Projection thermique — Mesure de l'adhérence par essais de traction,1999-08-19,1,['25.220.20'],ISO/TC 107,9599,,[60995],['en'],6,

23988,IS,,ISO 14917:1999,"Thermal spraying — Terminology, classification","Projection thermique — Terminologie, classification",1999-08-12,1,"['25.220.20','01.040.25']",ISO/TC 107,9599,,[60996],['en'],11,

23989,IS,,ISO 14918:1998,Thermal spraying — Approval testing of thermal sprayers,Projection thermique — Qualification des agents en projection thermique,1998-10-22,1,['25.220.20'],ISO/TC 107,9599,,"[68503,63868]","['en','fr']",24,

23990,IS,,ISO 14919:2001,"Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions","Projection thermique — Fils, baguettes et cordons pour projection thermique à l'arc et au pistolet dans une flamme — Classification — Conditions techniques d'approvisionnement",2001-08-23,1,['25.220.20'],ISO/TC 107,9599,,"[62084,45969]","['en','fr']",15,

62084,IS,,ISO 14919:2015,"Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions","Projection thermique — Fils, baguettes et cordons pour projection thermique à l'arc et au pistolet dans une flamme — Classification — Conditions techniques d'approvisionnement",2015-01-08,2,['25.220.20'],ISO/TC 107,9599,[23990],[84401],"['en','fr']",14,"<p>ISO 14919:2015 specifies requirements for classification of metal and non-metal wires (solid and cored), rods, cords processed by means of thermal spraying, especially by arc and flame spraying.</p>"