Withdrawn and superseded ISO standards — page 45 of 246

52440,IS,,ISO 14644-10:2013,Cleanrooms and associated controlled environments — Part 10: Classification of surface cleanliness by chemical concentration,Salles propres et environnements maîtrisés apparentés — Partie 10: Classification de la propreté chimique des surfaces,2013-03-01,1,['13.040.35'],ISO/TC 209,9599,,[76891],"['en','fr']",30,"<p>ISO 14644-10:2012 defines the classification system for cleanliness of surfaces in cleanrooms with regard to the presence of chemical compounds or elements (including molecules, ions, atoms and particles). It is applicable to all solid surfaces in cleanrooms and associated controlled environments such as walls, ceilings, floors, working environment, too

61270,IS,,ISO 14644-13:2017,Cleanrooms and associated controlled environments — Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications,Salles propres et environnements maîtrisés apparentés — Partie 13: Nettoyage des surfaces afin d'obtenir des niveaux de propreté par rapport aux classifications particulaire et chimique,2017-07-11,1,['13.040.35'],ISO/TC 209,9599,,[91614],"['en','fr']",34,"<p>ISO 14644-13:2017 gives guidelines for cleaning to a specified degree on cleanroom surfaces, surfaces of equipment in a cleanroom and surfaces of materials in a cleanroom. Under consideration are all surfaces (external or internal) that are

60970,IS,,ISO 14644-14:2016,Cleanrooms and associated controlled environments — Part 14: Assessment of suitability for use of equipment by airborne particle concentration,Salles propres et environnements maîtrisés apparentés — Partie 14: Évaluation de l'aptitude à l'emploi des équipements par la détermination de la concentration de particules en suspension dans l'air,2016-09-14,1,['13.040.35'],ISO/TC 209,9599,,[91615],"['en','fr']",21,"<p>ISO 14644-14:2016 specifies a methodology to assess the suitability of equipment (e.g. machinery, measuring equipment, process equipment, components and tools) for use in cleanrooms and associated controlled environments, with respect to airborne particle c

65266,IS,,ISO 14644-15:2017,Cleanrooms and associated controlled environments — Part 15: Assessment of suitability for use of equipment and materials by airborne chemical concentration,Salles propres et environnements maîtrisés apparentés — Partie 15: Évaluation de l'aptitude à l'emploi des équipements et des matériaux par la détermination de la concentration chimique aéroportée,2017-10-26,1,['13.040.35'],ISO/TC 209,9599,,[91616],"['en','fr']",21,<p>ISO 14644-15:2017 provides requirements and guidelines for assessing the chemical airborne cleanliness of equipment and materials which are foreseen to be used in cleanrooms and associated controlled environments which are linked to the ISO stand

25008,IS,,ISO 14644-2:2000,Cleanrooms and associated controlled environments — Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1,Salles propres et environnements maîtrisés apparentés — Partie 2: Spécifications pour les essais et la surveillance en vue de démontrer le maintien de la conformité avec l'ISO 14644-1,2000-09-07,1,['13.040.35'],ISO/TC 209,9599,,[53393],"['en','fr']",7,

37261,IS,,ISO 14644-3:2005,Cleanrooms and associated controlled environments — Part 3: Test methods,Salles propres et environnements maîtrisés apparentés — Partie 3: Méthodes d'essai,2005-12-06,1,['13.040.35'],ISO/TC 209,9599,,[60598],"['en','fr']",65,"<p>ISO 14644-3:2005 specifies test methods for designated classification of airborne particulate cleanliness and for characterizing the performance of cleanrooms and clean zones. Performance tests are specified for two types of cleanrooms and clean zones: those with unidirectional flow and those with non-unidirectional flow, in three possible occupancy states: as-built, at-rest and operational. </p><p>ISO 14644-3:2005 is not applicable to the

25007,IS,,ISO 14644-4:2001,"Cleanrooms and associated controlled environments — Part 4: Design, construction and start-up","Salles propres et environnements maîtrisés apparentés — Partie 4: Conception, construction et mise en fonctionnement",2001-04-12,1,['13.040.35'],ISO/TC 209,9599,,"[72379,68918]","['en','fr']",51,

33445,IS,,ISO 14644-5:2004,Cleanrooms and associated controlled environments — Part 5: Operations,Salles propres et environnements maîtrisés apparentés — Partie 5: Exploitation,2004-08-13,1,['13.040.35'],ISO/TC 209,9599,,"[83677,88599]","['en','fr']",44,"<p>ISO 14644-5:2004 specifies basic requirements for cleanroom operations. It is intended for those planning to use and operate a cleanroom. Aspects of safety that have no direct bearing on contamination control are not considered in this part of ISO 14644 and national and local safety regulations must be observed. This document considers all classes of cleanrooms used to produce all types of products. Therefore, it is broad in application a

37728,IS,,ISO 14644-8:2006,Cleanrooms and associated controlled environments — Part 8: Classification of airborne molecular contamination,Salles propres et environnements maîtrisés apparentés — Partie 8: Classification de la contamination moléculaire aéroportée,2006-08-10,1,['13.040.35'],ISO/TC 209,9599,,[59424],"['en','fr']",18,"<p>ISO 14644-8:2006 covers the classification of airborne molecular contamination (AMC) in cleanrooms and associated controlled environments in terms of airborne concentrations of specific chemical substances (individual, group or category) and provides a protocol to include test methods, analysis and time weighted factors within the specification for classification

59424,IS,,ISO 14644-8:2013,Cleanrooms and associated controlled environments — Part 8: Classification of air cleanliness by chemical concentration (ACC),Salles propres et environnements maîtrisés apparentés — Partie 8: Classification de la propreté chimique de l'air,2013-02-18,2,['13.040.35'],ISO/TC 209,9599,[37728],[76890],"['en','fr']",22,"<p>ISO 14644-8:2013 establishes the classification of air chemical cleanliness (ACC) in cleanrooms and associated controlled environments, in terms of airborne concentrations of specific chemical substances (individual, group or category) and provides a protocol to include test methods, analysis and time-weighted factors within the specification for clas

45826,IS,,ISO 14644-9:2012,Cleanrooms and associated controlled environments — Part 9: Classification of surface cleanliness by particle concentration,Salles propres et environnements maîtrisés apparentés — Partie 9: Classification de la propreté des surfaces par la concentration de particules,2012-08-08,1,['13.040.35'],ISO/TC 209,9599,,[76889],"['en','fr']",26,"<p>ISO 14644-9:2012 establishes the classification of cleanliness levels on solid surfaces by particle concentration in cleanrooms and associated controlled environment applications. Recommendations on testing and measuring methods, as well as information about surface characteristics are also given</p><p>ISO 14644-9:2012 applies to

34744,IS,,ISO 14649-10:2003,Industrial automation systems and integration — Physical device control — Data model for computerized numerical controllers — Part 10: General process data,Systèmes d'automatisation industrielle et intégration — Commande des dispositifs physiques — Modèle de données pour les contrôleurs numériques informatisés — Partie 10: Données des procédés généraux,2003-05-23,1,['25.040.20'],ISO/TC 184/SC 1,9599,[13540],[40895],['en'],176,"<p>ISO 14649-10:2003 specifies the process data which is generally needed for NC-programming within all machining technologies. These data elements describe the interface between a computerized numerical controller and the programming system

34745,IS,,ISO 14649-11:2003,Industrial automation systems and integration — Physical device control — Data model for computerized numerical controllers — Part 11: Process data for milling,Systèmes d'automatisation industrielle et intégration — Commande des dispositifs physiques — Modèle de données pour les contrôleurs numériques informatisés — Partie 11: Données des procédés relatifs au fraisage,2003-05-23,1,['25.040.20'],ISO/TC 184/SC 1,9599,[13540],[40896],['en'],77,"<p>ISO 14649-11:2003 specifies the technology-specific data elements needed as process data for milling. Together with the general process data described in ISO 14649-10, it describes the interface between a computerized numer

6061,IS,,ISO 1465:1976,Aircraft — Liquid oxygen replenishment couplings — Mating dimensions,Aéronefs — Raccords de remplissage en oxygène liquide — Dimensions de raccordement,1976-06-01,1,"['49.100','49.080']",ISO/TC 20/SC 10,9599,,[6062],['en'],3,

24150,IS,,ISO 14660-1:1999,Geometrical Product Specifications (GPS) — Geometrical features — Part 1: General terms and definitions,Spécification géométrique des produits (GPS) — Éléments géométriques — Partie 1: Termes généraux et définitions,1999-10-21,1,"['17.040.40','01.040.17','01.100.20']",ISO/TC 213,9599,,[53628],"['en','fr']",8,

28070,IS,,ISO 14660-2:1999,"Geometrical Product Specifications (GPS) — Geometrical features — Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature","Spécification géométrique des produits (GPS) — Éléments géométriques — Partie 2: Ligne médiane extraite d'un cylindre et d'un cône, surface médiane extraite, taille locale d'un élément extrait",1999-09-30,1,"['17.040.40','01.100.20']",ISO/TC 213,9599,,[62309],"['en','fr']",9,

22050,IS,,ISO 14663-1:1999,Plastics — Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Matériaux à base de copolymères éthylène/alcool vinylique (EVOH) pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,1999-04-15,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[70511],"['en','fr']",6,

22051,IS,,ISO 14663-2:1999,Plastics — Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Matériaux à base de copolymères éthylène/alcool vinylique (EVOH) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,1999-04-15,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[70512],"['en','fr']",16,

25162,IS,,ISO 14669:1999,"Water quality — Determination of acute lethal toxicity to marine copepods (Copepoda, Crustacea)","Qualité de l'eau — Détermination de la toxicité létale aiguë vis-à-vis de copépodes marins (Copepoda, Crustacea)",1999-04-01,1,['13.060.70'],ISO/TC 147/SC 5,9599,,[87981],"['en','fr']",16,"<p>This International Standard describes a method for the determination of the acute toxicity to one of three specified</p><p>species of marine copepod (Copepoda, Crustacea) of</p><p>a) chemical substances which are soluble, or can be maintained as a stable suspension or dispersion, under the</p><p>conditions of the test;</p><p>b) industrial or sewage effluents, treated or untreated,

6064,IS,,ISO 1467:1973,General purpose push-pull single-pole circuit-breakers for aircraft — Performance requirements,Disjoncteurs unipolaires à bouton-poussoir d'usage courant utilisés à bord des aéronefs — Caractéristiques,1973-11-01,1,['49.060'],ISO/TC 20/SC 1,9599,,"[83795,82784]","['en','fr']",9,"<p>Specifies the requirements for circuit breakers having an inverse time/current characteristic, of normal ratings up to and including 35 A, for use in nominal 28 V d. c. and/or 115 V single-phase 4OO Hz a. c. line to neutral circuits. Includes definitions, design requirements, requirements for dimensions, construction, voltage and current ratings, environment, time/current characteristics, ma

31421,IS,,ISO 14673-1:2001,Milk and milk products — Determination of nitrate and nitrite contents — Part 1: Method using cadmium reduction and spectrometry,Lait et produits laitiers — Détermination des teneurs en nitrates et en nitrites — Partie 1: Méthode par réduction au cadmium et spectrométrie,2001-11-01,1,['67.100.01'],ISO/TC 34/SC 5,9599,"[13192,13196,15287,9840,13197]",[38702],"['en','fr']",13,

36986,IS,Cor,ISO 14673-1:2001/Cor 1:2002,Milk and milk products — Determination of nitrate and nitrite contents — Part 1: Method using cadmium reduction and spectrometry — Technical Corrigendum 1,Lait et produits laitiers — Détermination des teneurs en nitrates et en nitrites — Partie 1: Méthode par réduction au cadmium et spectrométrie — Rectificatif technique 1,2002-06-20,1,['67.100.01'],ISO/TC 34/SC 5,9599,,[38702],['fr'],,

31422,IS,,ISO 14673-2:2001,Milk and milk products — Determination of nitrate and nitrite contents — Part 2: Method using segmented flow analysis (Routine method),Lait et produits laitiers — Détermination des teneurs en nitrates et en nitrites — Partie 2: Méthode par analyse d'écoulement segmentée (Méthode de routine),2001-11-01,1,['67.100.01'],ISO/TC 34/SC 5,9599,"[13192,13196,15287,9840,13197]",[38703],"['en','fr']",14,

36987,IS,Cor,ISO 14673-2:2001/Cor 1:2002,Milk and milk products — Determination of nitrate and nitrite contents — Part 2: Method using segmented flow analysis (Routine method) — Technical Corrigendum 1,Lait et produits laitiers — Détermination des teneurs en nitrates et en nitrites — Partie 2: Méthode par analyse d'écoulement segmentée (Méthode de routine) — Rectificatif technique 1,2002-06-20,1,['67.100.01'],ISO/TC 34/SC 5,9599,,[38703],['fr'],,

31423,IS,,ISO 14673-3:2001,Milk and milk products — Determination of nitrate and nitrite contents — Part 3: Method using cadmium reduction and flow injection analysis with in-line dialysis (Routine method),Lait et produits laitiers — Détermination des teneurs en nitrates et en nitrites — Partie 3: Méthode par réduction au cadmium et d'analyse par injection avec dialyse en ligne (Méthode de routine),2001-11-01,1,['67.100.01'],ISO/TC 34/SC 5,9599,"[13192,13196,15287,9840,13197]",[38704],"['en','fr']",10,

36988,IS,Cor,ISO 14673-3:2001/Cor 1:2002,Milk and milk products — Determination of nitrate and nitrite contents — Part 3: Method using cadmium reduction and flow injection analysis with in-line dialysis (Routine method) — Technical Corrigendum 1,Lait et produits laitiers — Détermination des teneurs en nitrates et en nitrites — Partie 3: Méthode par réduction au cadmium et d'analyse par injection avec dialyse en ligne (Méthode de routine) — Rectificatif technique 1,2002-06-20,1,['67.100.01'],ISO/TC 34/SC 5,9599,,[38704],['fr'],,

23295,IS,,ISO 14683:1999,Thermal bridges in building construction — Linear thermal transmittance — Simplified methods and default values,Ponts thermiques dans les bâtiments — Coefficient de transmission thermique linéique — Méthodes simplifiées et valeurs par défaut,1999-07-01,1,['91.120.10'],ISO/TC 163/SC 2,9599,,[40964],"['en','fr']",24,

40964,IS,,ISO 14683:2007,Thermal bridges in building construction — Linear thermal transmittance — Simplified methods and default values,Ponts thermiques dans les bâtiments — Coefficient linéique de transmission thermique — Méthodes simplifiées et valeurs par défaut,2007-11-26,2,['91.120.10'],ISO/TC 163/SC 2,9599,[23295],[65706],"['en','fr']",23,<p>ISO 14683:2007 deals with simplified methods for determining heat flows through linear thermal bridges which occur at junctions of building elements.</p><p>ISO 14683:2007 specifies requirements relating to thermal bridge catalogues and manual calculation methods.</p><p>Default values of linear thermal transmittance are given in Annex A for informa

24769,IS,,ISO 14687-1:1999,Hydrogen fuel — Product specification — Part 1: All applications except proton exchange membrane (PEM) fuel cell for road vehicles,Carburant hydrogène — Spécification de produit — Partie 1: Toutes applications à l'exception des piles à combustible à membrane d'échange de protons (MEP) pour les véhicules routiers,1999-03-11,1,['71.100.20'],ISO/TC 197,9599,,[69539],"['en','fr']",9,

35109,IS,Cor,ISO 14687-1:1999/Cor 1:2001,Hydrogen fuel — Product specification — Part 1: All applications except proton exchange membrane (PEM) fuel cell for road vehicles — Technical Corrigendum 1,Carburant hydrogène — Spécification de produit — Partie 1: Toutes applications à l'exception des piles à combustible à membrane d'échange de protons (MEP) pour les véhicules routiers — Rectificatif technique 1,2001-04-19,1,['71.100.20'],ISO/TC 197,9599,,[69539],"['en','fr']",1,

50811,IS,Cor,ISO 14687-1:1999/Cor 2:2008,Hydrogen fuel — Product specification — Part 1: All applications except proton exchange membrane (PEM) fuel cell for road vehicles — Technical Corrigendum 2,Carburant hydrogène — Spécification de produit — Partie 1: Toutes applications à l'exception des piles à combustible à membrane d'échange de protons (MEP) pour les véhicules routiers — Rectificatif technique 2,2008-03-10,1,['71.100.20'],ISO/TC 197,9599,,[69539],"['en','fr']",3,

55083,IS,,ISO 14687-2:2012,Hydrogen fuel — Product specification — Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles,Carburant hydrogène — Spécification de produit — Partie 2: Applications des piles à combustible à membrane à échange de protons (MEP) pour les véhicules routiers,2012-11-30,1,"['43.060.40','71.100.20']",ISO/TC 197,9599,[43994],[69539],['en'],17,<p>ISO 14687-2:2012 specifies the quality characteristics of hydrogen fuel in order to ensure uniformity of the hydrogen product as dispensed for utilization in proton exchange membrane (PEM) fuel cell road vehicle systems.</p>

69539,IS,,ISO 14687:2019,Hydrogen fuel quality — Product specification,Qualité du carburant hydrogène — Spécification de produit,2019-11-27,1,['71.100.20'],ISO/TC 197,9599,"[55078,50811,24769,55083,35109]",[82660],['en'],17,"<p>This document specifies the minimum quality characteristics of hydrogen fuel as distributed for utilization in vehicular and stationary applications.</p><p>It is applicable to hydrogen fuelling applications, which are listed in Table 1.</p>"

55078,IS,,ISO 14687-3:2014,Hydrogen fuel — Product specification — Part 3: Proton exchange membrane (PEM) fuel cell applications for stationary appliances,Carburant hydrogène - Spécification de produit — Partie 3: Applications des piles à combustible à membrane à échange de protons (PEM) pour appareils stationnaires,2014-02-05,1,['71.100.20'],ISO/TC 197,9599,,[69539],['en'],21,<p>ISO 14687-3:2014 specifies the quality characteristics of hydrogen fuel in order to ensure uniformity of the hydrogen product for utilization in stationary proton exchange membrane (PEM) fuel cell power systems.</p>

25260,IS,,ISO 14688-1:2002,Geotechnical investigation and testing — Identification and classification of soil — Part 1: Identification and description,"Reconnaissance et essais géotechniques — Dénomination, description et classification des sols — Partie 1: Dénomination et description",2002-09-19,1,['93.020'],ISO/TC 182,9599,,[66345],"['en','fr']",12,"<p>ISO 14688-1, together with ISO 14688-2, establishes the basic principles for the identification and classification of soils on the basis of those material and mass characteristics most commonly used for soils for engineering purposes. The relevant characteristics may vary and therefore, for particular projects or materials, more detailed sub

57690,IS,Amd,ISO 14688-1:2002/Amd 1:2013,Geotechnical investigation and testing — Identification and classification of soil — Part 1: Identification and description — Amendment 1,"Reconnaissance et essais géotechniques — Dénomination, description et classification des sols — Partie 1: Dénomination et description — Amendement 1",2013-08-14,1,['93.020'],ISO/TC 182,9599,,[66345],"['en','fr']",1,

34082,IS,,ISO 14688-2:2004,Geotechnical investigation and testing — Identification and classification of soil — Part 2: Principles for a classification,"Reconnaissance et essais géotechniques — Dénomination, description et classification des sols — Partie 2: Principes pour une classification",2004-07-14,1,['93.020'],ISO/TC 182,9599,,[66346],"['en','fr']",13,"<p>ISO 14688-2:2004, together with ISO 14688-1, establishes the basic principles for the identification and classification of soils on the basis of those material and mass characteristics most commonly used for soils for engineering purposes. The relevant characteristics may vary and therefore, for particular projects or materials, more

57691,IS,Amd,ISO 14688-2:2004/Amd 1:2013,Geotechnical investigation and testing — Identification and classification of soil — Part 2: Principles for a classification — Amendment 1,"Reconnaissance et essais géotechniques — Dénomination, description et classification des sols — Partie 2: Principes pour une classification — Amendement 1",2013-08-14,1,['93.020'],ISO/TC 182,9599,,[66346],"['en','fr']",1,

35572,IS,,ISO 14689-1:2003,Geotechnical investigation and testing — Identification and classification of rock — Part 1: Identification and description,"Reconnaissance et essais géotechniques — Dénomination, description et classification des roches — Partie 1: Dénomination et description",2003-11-25,1,['93.020'],ISO/TC 182,9599,,[66347],"['en','fr']",16,"<p>ISO 14689-1:2003 relates to the identification and description of rock material and mass on the basis of mineralogical composition, genetic aspects, structure, grain size, discontinuities and other parameters. It also provides rules for the description of other characteristics as well as for their designation.</p><p>ISO 14689-1:2003 applie

24523,IS,,ISO 14691:1999,Petroleum and natural gas industries — Flexible couplings for mechanical power transmission — General purpose applications,Industries du pétrole et du gaz naturel — Accouplements flexibles pour transmission de puissance mécanique — Applications d'usage général,1999-11-11,1,['75.180.20'],ISO/TC 67/SC 6,9599,,"[45476,35106]",['en'],26,"<p>Cette Norme internationale ne définit pas de critères de choix des différents types d'accouplements convenant à des applications spécifiques. Il est vivement recommandé, lorsque des utilisateurs veulent adapter des nouveaux accouplements sur un ensemble de machines existant, les nouveaux accouplements étant de types différents de ceu

33433,IS,,ISO 14692-1:2002,"Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials","Industries du pétrole et du gaz naturel — Canalisations en plastique renforcé de verre (PRV) — Partie 1: Vocabulaire, symboles, applications et matériaux",2002-12-06,1,"['75.200','83.140.30']",ISO/TC 67/SC 6,9599,,"[62256,46536]","['en','fr']",26,"<p>ISO 14692-1:2002 gives terms and definitions, describes the philosophy and provides guidance on the range of suitable applications, and defines limitations to the materials of construction for the specification, manufacture, testing and installation of glass-reinforced plastic (GRP)

33434,IS,,ISO 14692-2:2002,Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture,Industries du pétrole et du gaz naturel — Canalisations en plastique renforcé de verre (PRV) — Partie 2: Conformité aux exigences de performance et fabrication,2002-12-06,1,"['75.200','83.140.30']",ISO/TC 67/SC 6,9599,,"[46537,62257]","['en','fr']",86,"<p>ISO 14692-2:2002 gives requirements for the qualification and manufacture of GRP piping and fittings in order to enable the purchase of GRP components with known and consistent properties from any source. </p><p>It is applicable to qualification procedures, preferred dimensions, quality programmes,

43313,IS,Cor,ISO 14692-2:2002/Cor 1:2005,Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture — Technical Corrigendum 1,Industries du pétrole et du gaz naturel — Canalisations en plastique renforcé de verre (PRV) — Partie 2: Conformité aux exigences de performance et fabrication — Rectificatif technique 1,2005-10-06,1,"['75.200','83.140.30']",ISO/TC 67/SC 6,9599,,"[46537,62257]",['en'],2,

33435,IS,,ISO 14692-3:2002,Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design,Industries du pétrole et du gaz naturel — Canalisations en plastique renforcé de verre (PRV) — Partie 3: Conception des systèmes,2002-12-06,1,"['75.200','83.140.30']",ISO/TC 67/SC 6,9599,,"[62258,46538]","['en','fr']",79,"<p>ISO 14692-3:2002 gives guidelines for the system design of GRP piping systems for use in oil and natural gas industry processing and utility service applications. The requirements and recommendations apply to layout dimensions, hydraulic design, structural design, detailing, fire endurance, spread of fire and emissions and control of electrosta

43314,IS,Cor,ISO 14692-3:2002/Cor 1:2005,Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design — Technical Corrigendum 1,Industries du pétrole et du gaz naturel — Canalisations en plastique renforcé de verre (PRV) — Partie 3: Conception des systèmes — Rectificatif technique 1,2005-10-06,1,"['75.200','83.140.30']",ISO/TC 67/SC 6,9599,,"[62258,46538]",['en'],2,

33436,IS,,ISO 14692-4:2002,"Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation","Industries du pétrole et du gaz naturel — Canalisations en plastique renforcé de verre (PRV) — Partie 4: Construction, installation et mise en oeuvre",2002-12-06,1,"['75.200','83.140.30']",ISO/TC 67/SC 6,9599,,"[62259,46539]","['en','fr','ru']",52,"<p>ISO 14692-4:2002 gives requirements and recommendations for the fabrication, installation and operation of GRP piping systems for use in oil and natural gas industry processing and utility service applications. The recommendations apply to delivery, inspection, handling, storage, installat

44477,IS,Cor,ISO 14692-4:2002/Cor 1:2006,"Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation — Technical Corrigendum 1","Industries du pétrole et du gaz naturel — Canalisations en plastique renforcé de verre (PRV) — Partie 4: Construction, installation et mise en oeuvre — Rectificatif technique 1",2006-07-04,1,"['75.200','83.140.30']",ISO/TC 67/SC 6,9599,,"[62259,46539]","['en','ru']",2,

25015,IS,,ISO 14698-1:2003,Cleanrooms and associated controlled environments — Biocontamination control — Part 1: General principles and methods,Salles propres et environnements maîtrisés apparentés — Maîtrise de la biocontamination — Partie 1: Principes généraux et méthodes,2003-09-17,1,['13.040.35'],ISO/TC 209,9599,,"[60599,62818]","['en','fr']",32,"<p>ISO 14698:2003 establishes the principles and basic methodology of a formal system of biocontamination control (Formal System) for assessing and controlling biocontamination when cleanroom technology is applied for that purpose. It specifies the methods required for monitoring risk zones in a consistent way and for applying control measures

25014,IS,,ISO 14698-2:2003,Cleanrooms and associated controlled environments — Biocontamination control — Part 2: Evaluation and interpretation of biocontamination data,Salles propres et environnements maîtrisés apparentés — Maîtrise de la biocontamination — Partie 2: Évaluation et interprétation des données de biocontamination,2003-10-10,1,['13.040.35'],ISO/TC 209,9599,,"[62818,60600]","['en','fr']",11,"<p>ISO 14698-2:2003 gives guidance on methods for the evaluation of microbiological data and the estimation of results obtained from sampling for viable particles in risk zones for biocontamination control. It should be used, where appropriate, in conjunction with ISO 14698-1.</p>"

41179,IS,Cor,ISO 14698-2:2003/Cor 1:2004,Cleanrooms and associated controlled environments — Biocontamination control — Part 2: Evaluation and interpretation of biocontamination data — Technical Corrigendum 1,Salles propres et environnements maîtrisés apparentés — Maîtrise de la biocontamination — Partie 2: Évaluation et interprétation des données de biocontamination — Rectificatif technique 1,2004-11-12,1,['13.040.35'],ISO/TC 209,9599,,"[62818,60600]","['en','fr']",2,

54929,IS,,ISO 14701:2011,Surface chemical analysis — X-ray photoelectron spectroscopy — Measurement of silicon oxide thickness,Analyse chimique des surfaces — Spectroscopie de photoélectrons par rayons X — Mesurage de l'épaisseur d'oxyde de silicium,2011-08-02,1,['71.040.40'],ISO/TC 201/SC 7,9599,,[74818],['en'],15,"<p>ISO 14701:2011 specifies several methods for measuring the oxide thickness at the surfaces of (100) and (111) silicon wafers as an equivalent thickness of silicon dioxide when measured using X-ray photoelectron spectroscopy. It is only applicable to flat, polished specimens and for instruments that incorporate an Al or Mg X-ray source, a specimen stage that permits defined pho

24764,IS,,ISO 14703:2000,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Sample preparation for the determination of particle size distribution of ceramic powders",Céramiques techniques — Préparation de l'échantillon pour la détermination de la répartition granulométrique des poudres céramiques,2000-03-02,1,['81.060.30'],ISO/TC 206,9599,,[43924],"['en','fr']",6,

24765,IS,,ISO 14704:2000,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature",Céramiques techniques — Méthode d'essai de résistance en flexion des céramiques monolithiques à température ambiante,2000-08-24,1,['81.060.30'],ISO/TC 206,9599,,[43925],"['en','fr']",20,

39866,IS,Cor,ISO 14704:2000/Cor 1:2004,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature — Technical Corrigendum 1",Céramiques techniques — Méthode d'essai de résistance en flexion des céramiques monolithiques à température ambiante — Rectificatif technique 1,2004-01-07,1,['81.060.30'],ISO/TC 206,9599,,[43925],"['en','fr']",1,

43925,IS,,ISO 14704:2008,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature",Céramiques techniques — Méthode d'essai de résistance en flexion des céramiques monolithiques à température ambiante,2008-01-22,2,['81.060.30'],ISO/TC 206,9599,"[39866,24765]",[65411],['en'],28,"<p>ISO 14704:2008 specifies a test method for determining the flexural strength of monolithic fine ceramics, and whisker- or particulate-reinforced ceramic composites, at room temperature. Flexural strength is one measure of the uniaxial strength of a fine ceramics. This test method may be used for materials development, quality contr

24766,IS,,ISO 14705:2000,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature",Céramiques techniques — Méthode d'essai de dureté des céramiques monolithiques à température ambiante,2000-03-09,1,['81.060.30'],ISO/TC 206,9599,,[43926],"['en','fr']",18,

43926,IS,,ISO 14705:2008,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature",Céramiques techniques — Méthode d'essai de dureté des céramiques monolithiques à température ambiante,2008-01-22,2,['81.060.30'],ISO/TC 206,9599,[24766],[65412],['en'],17,<p>ISO 14705:2008 specifies a test method for determining the Vickers and Knoop hardness of monolithic fine ceramics at room temperature.</p>

24337,IS,,ISO 14706:2000,Surface chemical analysis — Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy,Analyse chimique des surfaces — Détermination de la contamination en éléments à la surface des tranches de silicium par spectroscopie de fluorescence X à réflexion totale,2000-12-21,1,['71.040.40'],ISO/TC 201,9599,,[61870],['en'],23,

24338,IS,,ISO 14707:2000,Surface chemical analysis — Glow discharge optical emission spectrometry (GD-OES) — Introduction to use,Analyse chimique des surfaces — Spectrométrie d'émission optique à décharge luminescente — Introduction à son emploi,2000-08-17,1,['71.040.40'],ISO/TC 201/SC 8,9599,,"[63276,61424]","['en','fr']",8,

63276,IS,,ISO 14707:2015,Surface chemical analysis — Glow discharge optical emission spectrometry (GD-OES) — Introduction to use,Analyse chimique des surfaces — Spectrométrie d'émission optique à décharge luminescente — Introduction à son emploi,2015-03-16,2,['71.040.40'],ISO/TC 201/SC 8,9599,[24338],[81700],['en'],12,"<p>ISO 14707:2015 provides guidelines that are applicable to bulk and depth profiling GD-OES analyses. The guidelines discussed herein are limited to the analysis of rigid solids, and do not cover the analysis of powders, gases or solutions.</p>"

25298,IS,,ISO 14708-1:2000,"Implants for surgery — Active implantable medical devices — Part 1: General requirements for safety, marking and for information to be provided by the manufacturer","Implants chirurgicaux — Dispositifs médicaux implantables actifs — Partie 1: Exigences générales pour la sécurité, le marquage et pour les informations à fournir par le fabricant",2000-11-23,1,['11.040.40'],ISO/TC 150/SC 6,9599,,[52804],"['en','fr']",40,

31508,IS,,ISO 14708-2:2005,Implants for surgery — Active implantable medical devices — Part 2: Cardiac pacemakers,Implants chirurgicaux — Dispositifs médicaux implantables actifs — Partie 2: Stimulateurs cardiaques,2005-10-11,1,['11.040.40'],ISO/TC 150/SC 6,9599,[12021],[51187],"['en','ru']",96,"<p>ISO 14708-2:2005 specifies requirements that are applicable to those active implantable medical devices intended to treat bradyarrhythmias (cardiac pacemakers).</p><p>The tests that are specified in ISO 14708-2:2005 are type tests, and are to be carried out on samples of a device to show compliance.</p><p>ISO 14708-2:2005 is also applicable to some non-implantable parts and accessories of the devi

51187,IS,,ISO 14708-2:2012,Implants for surgery — Active implantable medical devices — Part 2: Cardiac pacemakers,Implants chirurgicaux — Dispositifs médicaux implantables actifs — Partie 2: Stimulateurs cardiaques,2012-08-06,2,['11.040.40'],ISO/TC 150/SC 6,9599,[31508],[67699],"['en','ru']",68,"<p>ISO 14708-2:2012 specifies requirements that are applicable to those active implantable medical devices intended to treat bradyarrhythmias.</p><p>The tests that are specified in ISO 14708-2:2012 are type tests, and are to be carried out on samples of a device to show compliance.</p><p>ISO 14708-2:2012 is also applicable to some non-implantable parts and accessories of the devices.</p>"

41944,IS,,ISO 14708-3:2008,Implants for surgery — Active implantable medical devices — Part 3: Implantable neurostimulators,Implants chirurgicaux — Dispositifs médicaux implantables actifs — Partie 3: Neurostimulateurs en implant,2008-11-05,1,['11.040.40'],ISO/TC 150/SC 6,9599,,[60539],['en'],45,"<p>ISO 14708-3:2008 is applicable to active implantable medical devices intended for electrical stimulation of the central or peripheral nervous system.</p><p>ISO 14708-3:2008 is also applicable to all non-implantable parts and accessories of the devices.</p><p>The tests that are specified in ISO 14708-3:2008 are type tests intended to be carried out on a sample of a device to show compliance, and a

41942,IS,,ISO 14708-4:2008,Implants for surgery — Active implantable medical devices — Part 4: Implantable infusion pumps,Implants chirurgicaux — Dispositifs médicaux implantables actifs — Partie 4: Pompes d'infusion en implant,2008-11-05,1,['11.040.40'],ISO/TC 150/SC 6,9599,,"[73537,60540]",['en'],42,"<p>ISO 14708-4:2008 is applicable to active implantable medical devices intended to deliver medicinal substances to site-specific locations within the human body.</p><p>ISO 14708-4:2008 is also applicable to some non-implantable parts and accessories of the devices.</p><p>The tests that are specified in ISO 14708-4:2008 are type tests intended to be carried out on a sample of a device to show

52779,IS,,ISO 14708-5:2010,Implants for surgery — Active implantable medical devices — Part 5: Circulatory support devices,Implants chirurgicaux — Dispositifs médicaux implantables actifs — Partie 5: Appareils annexes circulatoires,2010-01-26,1,['11.040.40'],ISO/TC 150/SC 6,9599,,[69898],['en'],47,"<p>ISO 14708-5:2010 specifies requirements for safety and performance of active implantable circulatory support devices. It is not applicable to extracorporeal perfusion devices, cardiomyoplasty, heart restraint devices and counter-pulsation devices, such as extra- or intra-aortic balloon pumps.</p><p>ISO 14708-5:2010 specifies type tests, animal studies and clinical evaluation requirements.</p>"

52427,IS,,ISO 14708-6:2010,Implants for surgery — Active implantable medical devices — Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators),Implants chirurgicaux — Dispositifs médicaux implantables actifs — Partie 6: Exigences particulières pour les dispositifs médicaux implantables actifs destinés à traiter la tachyarythmie (y compris les défibrillateurs implantables),2010-02-25,1,['11.040.40'],ISO/TC 150/SC 6,9599,,[67700],['en'],110,<p>ISO 14708-6:2010 specifies requirements that are applicable to implantable cardioverter defibrillators and the functions of active implantable medical devices intende

57580,IS,,ISO 14708-7:2013,Implants for surgery — Active implantable medical devices — Part 7: Particular requirements for cochlear implant systems,Implants chirurgicaux — Dispositifs médicaux implantables actifs — Partie 7: Exigences particulières pour les systèmes d'implant cochléaire,2013-01-08,1,['11.040.40'],ISO/TC 150/SC 6,9599,,[67701],['en'],54,<p>ISO 14708-7:2013 specifies requirements that are applicable to those active implantable medical devices that are intended to treat hearing impairment via electrical stimulation of the auditory pathways. </p><p>The tests that are specified in ISO 14708-7:2013 are type tests and are to be carried out on samples of a device to show compliance.

43432,IS,,ISO 14713-1:2009,Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance,Revêtements de zinc — Lignes directrices et recommandations pour la protection contre la corrosion du fer et de l'acier dans les constructions — Partie 1: Principes généraux de conception et résistance à la corrosion,2009-12-10,1,['25.220.40'],ISO/TC 107/SC 4,9599,[25307],[71135],"['en','fr','ru']",17,"<p>ISO 14713-1:2009 provides guidelines and recommendations regarding the general principles of design which are appropriate for articles to be zinc coated for corrosion protection and the

25307,IS,,ISO 14713:1999,Protection against corrosion of iron and steel in structures — Zinc and aluminium coatings — Guidelines,Protection contre la corrosion du fer et de l'acier dans les constructions — Revêtements de zinc et d'aluminium — Lignes directrices,1999-03-04,1,['25.220.40'],ISO/TC 107/SC 4,9599,,"[45946,45558,43432]","['en','fr']",39,

45558,IS,,ISO 14713-2:2009,Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 2: Hot dip galvanizing,Revêtements de zinc — Lignes directrices et recommandations pour la protection contre la corrosion du fer et de l'acier dans les constructions — Partie 2: Galvanisation à chaud,2009-12-10,1,['25.220.40'],ISO/TC 107/SC 4,9599,[25307],[71136],"['en','fr','ru']",18,"<p>ISO 14713-2:2009 provides guidelines and recommendations regarding the general principles of design which are appropriate for articles to be hot dip galvanized for corrosion protection.</p><p>The protection afforded by the hot dip galvanized coating to the art

45946,IS,,ISO 14713-3:2009,Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 3: Sherardizing,Revêtements de zinc — Lignes directrices et recommandations pour la protection contre la corrosion du fer et de l'acier dans les constructions — Partie 3: Shérardisation,2009-12-10,1,['25.220.40'],ISO/TC 107/SC 4,9599,[25307],[71137],"['en','fr','ru']",8,"<p>ISO 14713-3:2009 provides guidelines and recommendations regarding the general principles of design that are appropriate for articles to be sherardized for corrosion protection.</p><p>The protection afforded by the sherardized coating to the article will depend upon the meth

24647,IS,,ISO 14714:1998,Essential oils and aromatic extracts — Determination of residual benzene content,Huiles essentielles et extraits aromatiques — Détermination de la teneur en benzène résiduel,1998-07-23,1,['71.100.60'],ISO/TC 54,9599,,"[87005,81572]","['en','fr']",5,

24648,IS,,ISO 14715:1999,"Oil of thyme containing thymol, Spanish type (Thymus zygis (Loefl.) L.)","Huile essentielle de thym à thymol, type Espagne (Thymus zygis (Loefl.) L.)",1999-09-30,1,['71.100.60'],ISO/TC 54,9599,,[44702],"['en','fr']",5,

44702,IS,,ISO 14715:2010,"Oil of thyme containing thymol, Spanish type [Thymus zygis (Loefl.) L.]","Huile essentielle de thym à thymol, type Espagne [Thymus zygis (Loefl.) L.]",2010-01-26,2,['71.100.60'],ISO/TC 54,9599,[24648],[66267],"['en','fr']",8,"<p>ISO 14715:2010 specifies certain characteristics of the essential oil of thyme containing thymol, Spanish type [<i>Thymus zygis</i> (Loefl.) L.], with a view to facilitating the assessment of its quality.</p>"

24650,IS,,ISO 14717:1999,"Oil of origanum, Spanish type (Thymbra capitata (L.) Cav.)","Huile essentielle d'origanum, type Espagne (Thymbra capitata (L.) Cav.)",1999-09-30,1,['71.100.60'],ISO/TC 54,9599,,[44703],"['en','fr']",5,

54942,IS,,ISO 14720-1:2013,Testing of ceramic raw and basic materials — Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials — Part 1: Infrared measurement methods,Essais des matières premières pour produits réfractaires — Dosage du soufre dans les matières premières non oxydantes sous forme de poudre et de granulés — Partie 1: Méthodes d'essai par infrarouge,2013-02-14,1,['81.060.10'],ISO/TC 33,9599,,[89323],"['en','fr']",9,"<p>ISO 14720-1:2013 defines a method for the determination of sulfur in powdered and granular non-oxidic ceramic raw materials and materials, such as silicon carbides, silicon nitrides, graphites, carbon blacks, cokes, carbon po

54943,IS,,ISO 14720-2:2013,Testing of ceramic raw and basic materials — Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials — Part 2: Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow,Essais des matières premières pour produits réfractaires — Dosage du soufre dans les matières premières non oxydantes sous forme de poudre et de granulés — Partie 2: Spectrométrie d'émission optique avec plasma induit par haute fréquence (ICP/OES) ou chromatographie ionique après combustion dans un courant d'oxygène,2013-02-14,1,['81.060.10'],ISO/TC 33,9599,,[89324],"['en','fr']",15,"<p>This part of

24683,IS,,ISO 14721:2003,Space data and information transfer systems — Open archival information system — Reference model,Systèmes de transfert des informations et données spatiales — Système ouvert d'archivage d'information — Modèle de référence,2003-02-24,1,['49.140'],ISO/TC 20/SC 13,9599,,[57284],"['en','fr']",141,"<p>ISO 14721:2003 specifies a reference model for an open archival information system (OAIS). The purpose of this ISO 14721:2003 is to establish a system for archiving information, both digitalized and physical, with an organizational scheme composed of people who accept the responsibility to preserve information and make it available to a designated community. </p><p>T

57284,IS,,ISO 14721:2012,Space data and information transfer systems — Open archival information system (OAIS) — Reference model,Systèmes de transfert des informations et données spatiales — Système ouvert d'archivage d'information (SOAI) — Modèle de référence,2012-08-21,2,['49.140'],ISO/TC 20/SC 13,9599,[24683],[87471],['en'],126,"<p>ISO 14721:2012 defines the reference model for an open archival information system (OAIS). An OAIS is an archive, consisting of an organization, which may be part of a larger organization, of people and systems that has accepted the responsibility to preserve information and make it available for a designated community. It meets a set of such responsibilities a

25359,IS,,ISO 14723:2001,Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves,Industries du pétrole et du gaz naturel — Systèmes de transport par conduites — Vannes de conduites immergées,2001-12-13,1,['75.200'],ISO/TC 67/SC 2,9599,,[45023],['en'],62,"<p>La présente Norme Internationale spécifie des exigences minimales et donne des recommandations pour la conception, la fabrication, les essais et la documentation des vannes à tournant sphérique, clapets de retenue et robinets-vannes prévus pour des applications immergées dans les systèmes de conduites sous-marines satisfaisant aux exigences de l'ISO 13623 applicable aux Industries du Pétrole et du G

45023,IS,,ISO 14723:2009,Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves,Industries du pétrole et du gaz naturel — Systèmes de transport par conduites — Vannes de conduites immergées,2009-06-08,2,['75.200'],ISO/TC 67/SC 2,9599,[25359],[86821],"['en','fr']",72,"<p>ISO 14723:2009 specifies requirements and gives recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for subsea application in offshore pipeline systems meeting the requirements of ISO 13623 for the petroleum and natural gas industries.</p><p>ISO 14723:2009 is not applicable to valves for pressure ratings exceeding PN 420 (Class

25373,IS,,ISO 14726-1:1999,Ships and marine technology — Identification colours for the content of piping systems — Part 1: Main colours and media,Construction navale et technologie maritime — Couleurs pour l'identification du contenu des systèmes de tuyauterie — Partie 1: Couleurs et milieux principaux,1999-12-16,1,"['01.070','47.020.30']",ISO/TC 8/SC 3,9599,[4565],[44744],['en'],5,

28353,IS,,ISO 14726-2:2002,Ships and marine technology — Identification colours for the content of piping systems — Part 2: Additional colours for different media and/or functions,Navires et technologie maritime — Couleurs pour l'identification du contenu des systèmes de tuyauterie — Partie 2: Couleurs supplémentaires pour autres milieux et/ou fonctions,2002-07-04,1,"['01.070','47.020.30']",ISO/TC 8/SC 3,9599,,[44744],['en'],11,"<p>ISO 14726-2 specifies additional colours to be used with the main colours given in ISO 14726-1 for marking of piping systems in accordance with the content and/or function on board ships and marine structures.</p><p>Additional colours may not be used if no differe

30129,IS,,ISO 14728-1:2004,Rolling bearings — Linear motion rolling bearings — Part 1: Dynamic load ratings and rating life,Roulements — Roulements à mouvement linéaire — Partie 1: Charges dynamiques de base et durée nominale,2004-06-15,1,['21.100.20'],ISO/TC 4/SC 8,9599,,[66682],"['en','fr']",14,"<p>ISO 14728-1:2004 specifies methods of calculating the basic dynamic load rating and basic rating life for linear motion rolling bearings manufactured from contemporary, commonly used, high quality, hardened bearing steel in accordance with good manufacturing practice and basically of conventional design as regards the shape of the rolling contact surfaces. The life of linear motion rolling beari

30130,IS,,ISO 14728-2:2004,Rolling bearings — Linear motion rolling bearings — Part 2: Static load ratings,Roulements — Roulements à mouvement linéaire — Partie 2: Charges statiques de base,2004-06-15,1,['21.100.20'],ISO/TC 4/SC 8,9599,,[66683],"['en','fr']",11,"<p>ISO 14728-2:2004 specifies methods of calculating the basic static load rating, static equivalent load and static safety factor for linear motion rolling bearings manufactured from contemporary, commonly used, high quality, hardened bearing steel in accordance with good manufacturing practice and basically of conventional design as regards the shape of the rolling contact surfaces.</p><p>ISO 14728-2:2004 is not applicable to desig

24520,IS,,ISO 14730:2000,Ophthalmic optics — Contact lens care products — Antimicrobial preservative efficacy testing and guidance on determining discard date,Optique ophtalmique — Produits d'entretien des lentilles de contact — Essais de l'efficacité de conservation antimicrobienne et lignes directrices pour la détermination de la durée d'utilisation après première ouverture,2000-09-07,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[65165],"['en','fr']",23,

25383,IS,,ISO 14731:1997,Welding coordination — Tasks and responsibilities,Coordination en soudage — Tâches et responsabilités,1997-03-27,1,['25.160.01'],ISO/TC 44/SC 11,9599,,[35151],"['en','fr']",6,

35151,IS,,ISO 14731:2006,Welding coordination — Tasks and responsibilities,Coordination en soudage — Tâches et responsabilités,2006-10-02,2,['25.160.01'],ISO/TC 44/SC 11,9599,[25383],[68893],"['en','fr']",10,"<p>ISO 14731:2006 identifies the quality-related responsibilities and tasks included in the coordination of welding-related activities.</p><p>In any manufacturing organization, welding coordination can be undertaken by one or a number of persons.</p><p>Welding coordination requirements can be specified by a manufacturer, a contract or an application standard.</p>"

25384,IS,,ISO 14732:1998,Welding personnel — Approval testing of welding operators for fusion welding and of resistance weld setters for fully mechanized and automatic welding of metallic materials,Personnel en soudage — Épreuve de qualification des opérateurs soudeurs pour le soudage par fusion et des régleurs en soudage par résistance pour le soudage automatique et entièrement automatique des matériaux métalliques,1998-07-16,1,['25.160.01'],ISO/TC 44/SC 11,9599,,[54935],"['en','fr']",13,

54935,IS,,ISO 14732:2013,Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials,Personnel en soudage — Épreuve de qualification des opérateurs soudeurs et des régleurs en soudage pour le soudage mécanisé et le soudage automatique des matériaux métalliques,2013-07-24,2,['25.160.01'],ISO/TC 44/SC 11,9599,[25384],[82980],"['en','fr']",14,"<p>ISO 14732:2013 specifies requirements for qualification of welding operators and also weld setters for mechanized and automatic welding.</p><p>ISO 14732:2013 does not apply to personnel exclusively performing loading or unloading of the automatic welding unit.</p><p>ISO 1473

23774,IS,,ISO 14737:2003,Cast non-alloy and low alloy steels for general applications,Aciers moulés non alliés et faiblement alliés pour applications générales,2003-09-04,1,['77.140.80'],ISO/TC 17/SC 11,9599,,[59277],['en'],7,<p>ISO 14737:2003 specifies requirements for cast non-alloy and low alloy steel grades for general applications.</p>

59277,IS,,ISO 14737:2015,Carbon and low alloy cast steels for general applications,Aciers moulés au carbone et faiblement alliés d'usage général,2015-12-09,2,['77.140.80'],ISO/TC 17/SC 11,9599,"[23774,9252]",[79985],['en'],9,<p>ISO 14737:2015 specifies requirements for carbon and low alloy cast steel grades for general applications.</p><p>NOTE Annex B gives information on ISO grade designation and available UNS numbers which are similar to the ISO grade designation.</p>

25415,IS,,ISO 14740:1998,"Forest machinery — Backpack power units for brush-cutters, grass-trimmers, pole-cutters and similar appliances — Safety requirements and testing","Matériel forestier — Sources motrices portées à dos utilisées pour entraîner les débrouissailleuses, les coupe-herbe, les scies à perche et autres appareils similaires — Exigences de sécurité et essais",1998-05-07,1,['65.060.80'],ISO/TC 23/SC 17,9599,,"[51132,51136]","['en','fr']",10,

36441,IS,,ISO 14743:2004,Pneumatic fluid power — Push-in connectors for thermoplastic tubes,Transmissions pneumatiques — Raccords instantanés pour tubes thermoplastiques,2004-05-05,1,['23.100.40'],ISO/TC 131/SC 4,9599,,[73164],"['en','fr']",22,"<p>ISO 14743:2004 specifies the general requirements and test methods for the design and performance of push-in connectors for use with thermoplastic tubes with outside diameters of 3 mm to 12 mm, inclusive. It is intended to establish uniform methods of testing complete push-in connector assemblies as used in pneumatic fluid power applications. It is not applicable to air braking systems. </p>"

25465,IS,,ISO 14744-1:2000,Welding — Acceptance inspection of electron beam welding machines — Part 1: Principles and acceptance conditions,Soudage — Essais de réception des machines de soudage par faisceau d'électrons — Partie 1: Principes et conditions de réception,2000-04-06,1,['25.160.30'],ISO/TC 44/SC 10,9599,,[43497],"['en','fr']",9,

6067,IS,,ISO 1478:1983,Tapping screws thread,Filetage de vis à tôle,1983-09-01,1,['21.040.30'],ISO/TC 2,9599,,[29386],"['en','fr']",2,

25544,IS,,ISO 14782:1999,Plastics — Determination of haze for transparent materials,Plastiques — Détermination du trouble des matériaux transparents,1999-08-26,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[81840],"['en','fr']",6,"<p>This International Standard specifies a method for the measurement of haze, an optical property resulting from</p><p>wide-angle scattering of light, in transparent and substantially colourless plastics. This method is applicable to the</p><p>measurement of haze values of less than 40 %.</p><p>NOTE The haze of abraded or matted transparent plastics can be measured, but the value obtained may be erroneously</p><p>lower than the true value due to light scattering within a n

55038,IS,,ISO 14785:2014,Tourist information offices — Tourist information and reception services — Requirements,Offices de tourisme — Services d'accueil et d'informations aux touristes — Exigences,2014-03-31,1,"['03.200.01','03.080.30']",ISO/TC 228,9599,,[83625],"['en','fr']",11,"<p>ISO 14785:2014 establishes minimum quality requirements for services provided by tourist information offices (TIO) of any type and size, whether publicly or privately operated, in order to satisfy visitors' expectations.</p>"

25552,IS,,ISO 14788:1998,Continuous hot-dip zinc-5 %/aluminium alloy coated steel sheets and coils,Tôles et bobines en acier revêtues à chaud en continu d'alliage zinc-aluminium 5 %,1998-07-16,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[35498],"['en','fr']",18,