Withdrawn and superseded ISO standards — page 44 of 246

6046,IS,,ISO 1456:1974,Metallic coatings — Electroplated coatings of nickel plus chromium,Revêtements métalliques — Dépôts électrolytiques de nickel plus chrome,1974-07-01,1,['25.220.40'],ISO/TC 107/SC 3,9599,,[6047],"['en','fr']",12,

6047,IS,,ISO 1456:1988,Metallic coatings — Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium,Revêtements métalliques — Dépôts électrolytiques de nickel plus chrome et de cuivre plus nickel plus chrome,1988-09-01,2,['25.220.40'],ISO/TC 107/SC 3,9599,"[6048,6046]","[25093,36733]","['en','fr']",16,"<p>This second edition cancels and replaces the first edition (i. e. ISO 1456:1974) and ISO 1457:1974. Specifies requirements for these electrodeposited coatings that are applied to iron, steel, zinc alloys, cooper and copper alloys, and aluminium and aluminium alloys to provide an attractive appearance and corrosion resistance. According to the service conditi

36733,IS,,ISO 1456:2003,Metallic coatings — Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium,Revêtements métalliques — Dépôts électrolytiques de nickel plus chrome et de cuivre plus nickel plus chrome,2003-02-07,3,['25.220.40'],ISO/TC 107/SC 3,9599,[6047],[50237],"['en','fr']",19,"<p>ISO 1456 specifies the requirements for decorative, electroplated nickel plus chromium, and copper plus nickel plus chromium coatings on iron, steel, zinc alloys, copper and copper alloys, and aluminium and aluminium alloys to provide an attractive appearance and enhanced corrosion resistance. Coating designations are specified that differ in thickness and type, and guida

37869,IS,,ISO 14560:2004,Acceptance sampling procedures by attributes — Specified quality levels in nonconforming items per million,Règles d'échantillonnage par attributs en vue d'acceptation — Niveaux spécifiés de qualité en termes d'individus non conformes pour un million d'individus,2004-08-16,1,['03.120.30'],ISO/TC 69/SC 5,9599,,[64630],"['en','fr']",19,"<p>ISO 14560:2004 specifies, for quality levels expressed as nonconforming items per million items, procedures for estimating the quality level of a single entity (e.g. a lot) and, when the production process is in statistical control, for estimating the process quality level based on evidence from several samples. Procedures are also sp

6048,IS,,ISO 1457:1974,Metallic coatings — Electroplated coatings of copper plus nickel plus chromium on iron or steel,Revêtements métalliques — Dépôts électrolytiques de cuivre plus nickel plus chrome sur fer ou acier,1974-07-01,1,['25.220.40'],ISO/TC 107/SC 3,9599,,[6047],"['en','fr']",11,

24822,IS,,ISO 14572:2001,"Road vehicles — Round, unscreened 60 V and 600 V multicore sheathed cables — Test methods and requirements for basic and high performance cables","Véhicules routiers — Câbles multiconducteurs sous gaine, ronds, non blindés de 60 V et 600 V — Méthodes d'essai et exigences pour les câbles à performances de base et à hautes performances",2001-12-13,3,['43.040.10'],ISO/TC 22,9599,,[37984],"['en','fr']",15,

37984,IS,,ISO 14572:2006,"Road vehicles — Round, screened and unscreened 60 V and 600 V multi-core sheathed cables — Test methods and requirements for basic and high-performance cables","Véhicules routiers — Câbles multiconducteurs sous gaine, ronds, blindés et non blindés, de 60 V et 600 V — Méthodes d'essai et exigences pour les câbles à performances de base et à hautes performances",2006-10-31,2,['43.040.10'],ISO/TC 22,9599,[24822],[41513],"['en','fr']",18,"<p>ISO 14572:2006 specifies test methods and requirements for basic and high-performance round, screened and unscreened, multi-core sheathed cables, intended for use in road vehicle applications.</p><p>The unscreened, single-core cable

54893,IS,,ISO 14574:2013,"Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties",Céramiques techniques — Propriétés mécaniques des céramiques composites à haute température — Détermination des caractéristiques en traction,2013-03-18,1,['81.060.30'],ISO/TC 206,9599,,[84316],"['en','fr']",17,"<p>ISO 14574:2013 specifies the conditions for determination of tensile properties of ceramic matrix composite materials with continuous fibre reinforcement for temperatures up to 2 000 °C.</p><p>ISO 14574:2013 applies to all ceramic matrix composites with a continuous fibre reinforcement, unid

30104,IS,,ISO 14577-1:2002,Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method,Matériaux métalliques — Essai de pénétration instrumenté pour la détermination de la dureté et de paramètres des matériaux — Partie 1: Méthode d'essai,2002-10-10,1,['77.040.10'],ISO/TC 164/SC 3,9599,[24844],[56626],"['en','fr']",25,"<p>ISO 14577-1 specifies the method of instrumented indentation test for the determination of hardness and other materials parameters for the three ranges:</p><p> macro (test force between 2 N and 30 kN);</p><p> micro (test force less than 2 N; indentation depth greater than 0, 2 m);</p><p> nano (indentation depth equal to or l

56626,IS,,ISO 14577-1:2015,Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method,Matériaux métalliques — Essai de pénétration instrumenté pour la détermination de la dureté et de paramètres des matériaux — Partie 1: Méthode d'essai,2015-07-08,2,['77.040.10'],ISO/TC 164/SC 3,9599,[30104],[85223],"['en','fr']",46,"<p>ISO 14577-1:2015 specifies the method of instrumented indentation test for determination of hardness and other materials parameters for the following three ranges: macro range: 2 N ≤ F ≤ 30 kN; micro range: 2 N &gt; F; h &gt; 0,2 µm; and nano range: h ≤ 0,2 µm.</p><p>For the nano range, the mechanical deformation strongly de

30543,IS,,ISO 14577-2:2002,Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines,Matériaux métalliques — Essai de pénétration instrumenté pour la détermination de la dureté et de paramètres des matériaux — Partie 2: Vérification et étalonnage des machines d'essai,2002-10-10,1,['77.040.10'],ISO/TC 164/SC 3,9599,[24844],[56628],"['en','fr']",22,<p>ISO 14577-2 specifies the method of verification and calibration of testing machines for carrying out the instrumented test in accordance with ISO 14577-1.</p><p>It describes a direct verification method for checking the main functions of the testing machine

56628,IS,,ISO 14577-2:2015,Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines,Matériaux métalliques — Essai de pénétration instrumenté pour la détermination de la dureté et de paramètres des matériaux — Partie 2: Vérification et étalonnage des machines d'essai,2015-07-08,2,['77.040.10'],ISO/TC 164/SC 3,9599,[30543],[85224],"['en','fr']",25,<p>ISO 14577-2:2015 specifies the method of verification and calibration of testing machines for carrying out the instrumented indentation test in accordance with ISO 14577‑1:2015.</p><p>It describes a direct verification method for checking the main functions

32193,IS,,ISO 14577-3:2002,Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks,Matériaux métalliques — Essai de pénétration instrumenté pour la détermination de la dureté et de paramètres des matériaux — Partie 3: Étalonnage des blocs de référence,2002-10-10,1,['77.040.10'],ISO/TC 164/SC 3,9599,[24844],[56627],"['en','fr']",9,"<p>ISO 14577-3 specifies a method for the calibration of reference blocks to be used for the indirect verification of testing machines for the instrumented indentation test, as specified in ISO 14577-2.</p>"

56627,IS,,ISO 14577-3:2015,Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks,Matériaux métalliques — Essai de pénétration instrumenté pour la détermination de la dureté et de paramètres des matériaux — Partie 3: Étalonnage des blocs de référence,2015-07-22,2,['77.040.10'],ISO/TC 164/SC 3,9599,[32193],[85225],"['en','fr']",8,<p>ISO 14577-3:2015 specifies a method for the calibration of reference blocks to use for the indirect verification of testing machines for the instrumented indentation test as specified in ISO 14577‑2:2015.</p>

39228,IS,,ISO 14577-4:2007,Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 4: Test method for metallic and non-metallic coatings,Matériaux métalliques — Essai de pénétration instrumenté pour la détermination de la dureté et de paramètres des matériaux — Partie 4: Méthode d'essai pour les revêtements métalliques et non métalliques,2007-05-15,1,['77.040.10'],ISO/TC 164/SC 3,9599,,[61823],"['en','fr']",24,"<p>ISO 14577-4:2007 specifies a method for testing coatings that is particularly suitable for testing in the nano/micro range applicable to thin coatings.</p><p>This test method is limited to the examination of single layers when the indentation

24857,IS,,ISO 14579:2001,Hexalobular socket head cap screws,Vis à métaux à tête cylindrique à six lobes internes,2001-09-06,1,['21.060.10'],ISO/TC 2/SC 11,9599,,[56455],"['en','fr']",6,

6049,IS,,ISO 1458:1974,Metallic coatings — Electroplated coatings of nickel,Revêtements métalliques — Dépôts électrolytiques de nickel,1974-07-01,1,['25.220.40'],ISO/TC 107/SC 3,9599,,[6050],"['en','fr']",5,

6050,IS,,ISO 1458:1988,Metallic coatings — Electrodeposited coatings of nickel,Revêtements métalliques — Dépôts électrolytiques de nickel,1988-09-01,2,['25.220.40'],ISO/TC 107/SC 3,9599,[6049],"[25094,36746]","['en','fr']",14,"<p>This second edition cancels and replaces the first edition (i. e. ISO 1458:1974). Specifies requirements for these electrodeposited coatings that are applied to iron, steel, zinc alloys, cooper and copper alloys, and aluminium and aluminium alloys to provide an attractive appearance and corrosion resistance. According to the service conditions several classes of coatings are distinguished.</p>"

36746,IS,,ISO 1458:2002,Metallic coatings — Electrodeposited coatings of nickel,Revêtements métalliques — Dépôts électrolytiques de nickel,2002-12-02,3,['25.220.40'],ISO/TC 107/SC 3,9599,[6050],[50237],"['en','fr']",15,"<p>ISO 1458 specifies requirements for nickel electrodeposited coatings that are applied to iron and steel, to zinc alloys, to copper or copper alloys, and to aluminium and aluminium alloys to provide an attractive appearance and corrosion resistance. In addition, it specifies requirements for copper plus nickel coatings applied to iron and steel, and to zinc alloys. Coating designations that differ in thickness and type are specified and guidance is given in selecting the co

24858,IS,,ISO 14580:2001,Hexalobular socket cheese head screws,Vis à métaux à tête cylindrique basse à six lobes internes,2001-09-06,1,['21.060.10'],ISO/TC 2/SC 11,9599,,[56456],"['en','fr']",4,

41155,IS,Cor,ISO 14580:2001/Cor 1:2004,Hexalobular socket cheese head screws — Technical Corrigendum 1,Vis à métaux à tête cylindrique basse à six lobes internes — Rectificatif technique 1,2004-10-18,1,['21.060.10'],ISO/TC 2/SC 11,9599,,[56456],"['en','fr']",1,

56219,IS,,ISO 14581:2013,Fasteners — Hexalobular socket countersunk flat head screws,Éléments de fixation — Vis à tête fraisée réduite à six lobes internes,2013-09-12,1,['21.060.10'],ISO/TC 2/SC 11,9599,,[78695],"['en','fr']",7,<p>ISO 14581:2013 specifies the characteristics of hexalobular socket countersunk flat head screws in product grade A and with threads from M2 to M10 inclusive and with reduced loadability (according to Table 3).</p>

24861,IS,,ISO 14583:2001,Hexalobular socket pan head screws,Vis à métaux à tête cylindrique bombée large à six lobes internes,2001-09-06,1,['21.060.10'],ISO/TC 2/SC 11,9599,,[56457],"['en','fr']",4,

41157,IS,Cor,ISO 14583:2001/Cor 1:2004,Hexalobular socket pan head screws — Technical Corrigendum 1,Vis à métaux à tête cylindrique bombée large à six lobes internes — Rectificatif technique 1,2004-10-18,1,['21.060.10'],ISO/TC 2,9599,,[56457],"['en','fr']",1,

24862,IS,,ISO 14584:2001,Hexalobular socket raised countersunk head screws,Vis à métaux à tête fraisée bombée à six lobes internes,2001-09-06,1,['21.060.10'],ISO/TC 2/SC 11,9599,,[56458],"['en','fr']",4,

24863,IS,,ISO 14585:2001,Hexalobular socket pan head tapping screws,Vis à tôle à tête cylindrique bombée large à six lobes internes,2001-09-06,1,['21.060.10'],ISO/TC 2/SC 13,9599,,[56459],"['en','fr']",4,

40511,IS,Cor,ISO 14585:2001/Cor 1:2004,Hexalobular socket pan head tapping screws — Technical Corrigendum 1,Vis à tôle à tête cylindrique bombée large à six lobes internes — Rectificatif technique 1,2004-05-14,1,['21.060.10'],ISO/TC 2/SC 13,9599,,[56459],"['en','fr']",1,

24864,IS,,ISO 14586:2001,Hexalobular socket countersunk head tapping screws,Vis à tôle à tête fraisée à six lobes internes,2001-09-06,1,['21.060.10'],ISO/TC 2/SC 13,9599,,[56460],"['en','fr']",4,

24865,IS,,ISO 14587:2001,Hexalobular socket raised countersunk (oval) head tapping screws,Vis à tôle à tête fraisée bombée à six lobes internes,2001-09-06,1,['21.060.10'],ISO/TC 2/SC 13,9599,,[56461],"['en','fr']",4,

6051,IS,,ISO 1459:1973,Metallic coatings — Protection against corrosion by hot dip galvanizing — Guiding principles,Revêtements métalliques — Protection contre la corrosion par galvanisation à chaud — Principes directeurs,1973-07-01,1,['25.220.40'],ISO/TC 107/SC 4,9599,,[6056],"['en','fr']",2,

24868,IS,,ISO 14590:1999,Cold-reduced steel sheet of high tensile strength and low yield point with improved formability,"Tôles en acier laminées à froid à haute résistance à la traction, basse limite inférieure d'écoulement et aptitude au formage accrue",1999-02-04,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[35497],['en'],13,

35497,IS,,ISO 14590:2005,Cold-reduced steel sheet of high tensile strength and low yield point with improved formability,"Tôles en acier laminées à froid à haute résistance à la traction et faible limite d'élasticité, et aptitude au formage accrue",2005-02-07,2,['77.140.50'],ISO/TC 17/SC 12,9599,[24868],[67386],"['en','fr']",13,<p>ISO 14590:2005 applies to killed cold-reduced steel sheet of two types that are commercially available in the world. Type 1 (Table 1) represents steels that are produced to mechanical properties only and Type 2 (Table 2) are produced to both mechanical and chemical properties. Bake hardening steels are included in both types. All these steels are commonly produced

23968,IS,,ISO 14594:2003,Microbeam analysis — Electron probe microanalysis — Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy,Analyse par microfaisceaux — Analyse par microsonde électronique (Microsonde de Castaing) — Lignes directrices pour la détermination des paramètres expérimentaux pour la spectrométrie à dispersion de longueur d'onde,2003-07-29,1,['71.040.50'],ISO/TC 202/SC 2,9599,,[66542],"['en','fr']",17,"<p>ISO 14594:2003 gives the general guidelines for the determination of experimental parameters relating to the primary beam, the wavelength spectrometer and the sample that need to be taken into account when carrying out electron pr

53632,IS,Cor,ISO 14594:2003/Cor 1:2009,Microbeam analysis — Electron probe microanalysis — Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy — Technical Corrigendum 1,Analyse par microfaisceaux — Analyse par microsonde électronique (Microsonde de Castaing) — Lignes directrices pour la détermination des paramètres expérimentaux pour la spectrométrie à dispersion de longueur d'onde — Rectificatif technique 1,2009-03-09,1,['71.040.50'],ISO/TC 202/SC 2,9599,,[66542],['en'],1,

66542,IS,,ISO 14594:2014,Microbeam analysis — Electron probe microanalysis — Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy,Analyse par microfaisceaux — Analyse par microsonde électronique (Microsonde de Castaing) — Lignes directrices pour la détermination des paramètres expérimentaux pour la spectrométrie à dispersion de longueur d'onde,2014-10-21,2,['71.040.50'],ISO/TC 202/SC 2,9599,"[23968,53632]",[81640],['en'],18,"<p>ISO 14594:2014 gives the general guidelines for the determination of experimental parameters relating to the primary beam, the wavelength spectrometer, and the sample that need to be taken into account when carrying out el

23969,IS,,ISO 14595:2003,Microbeam analysis — Electron probe microanalysis — Guidelines for the specification of certified reference materials (CRMs),Analyse par microfaisceaux — Microanalyse par sonde à électrons — Lignes directrices pour les spécifications des matériaux de référence certifiés (CRM),2003-05-26,1,"['71.040.30','71.040.99']",ISO/TC 202/SC 2,9599,,[66543],"['en','fr']",16,"<p>ISO 14595:2003 has been developed to facilitate international exchange and compatibility of analysis data in electron probe microanalysis (EPMA). It gives guidance on evaluating and selecting reference materials (RMs), on evaluating the extent of heterogeneity and stability of RMs and it gives recommendat

42784,IS,Cor,ISO 14595:2003/Cor 1:2005,Microbeam analysis — Electron probe microanalysis — Guidelines for the specification of certified reference materials (CRMs) — Technical Corrigendum 1,Analyse par microfaisceaux — Microanalyse par sonde à électrons — Lignes directrices pour les spécifications des matériaux de référence certifiés (CRM) — Rectificatif technique 1,2005-07-15,1,"['71.040.30','71.040.99']",ISO/TC 202/SC 2,9599,,[66543],['fr'],,

66543,IS,,ISO 14595:2014,Microbeam analysis — Electron probe microanalysis — Guidelines for the specification of certified reference materials (CRMs),Analyse par microfaisceaux — Microanalyse par sonde à électrons — Lignes directrices pour les spécifications des matériaux de référence certifiés (CRM),2014-10-20,2,"['71.040.30','71.040.99']",ISO/TC 202/SC 2,9599,"[42784,23969]",[82189],['en'],16,"<p>ISO 14595:2014 gives recommendations for single-phase certified reference materials (CRMs) used in electron probe microanalysis (EPMA). It also provides guidance on the use of CRMs for the microanalysis of flat, polished specimens. It does not cover organic or biological materials.</p>"

24881,IS,,ISO 14596:1998,Petroleum products — Determination of sulfur content — Wavelength-dispersive X-ray fluorescence spectrometry,Produits pétroliers — Dosage du soufre — Spectrométrie de fluorescence X dispersive en longueur d'onde,1998-06-11,1,['75.080'],ISO/TC 28,9599,,[42636],"['en','fr']",6,

32366,IS,Cor,ISO 14596:1998/Cor 1:1999,Petroleum products — Determination of sulfur content — Wavelength-dispersive X-ray fluorescence spectrometry — Technical Corrigendum 1,Produits pétroliers — Dosage du soufre — Spectrométrie de fluorescence X dispersive en longueur d'onde — Rectificatif technique 1,1999-07-15,1,['75.080'],ISO/TC 28,9599,,[42636],"['en','fr']",1,

3974,IS,,ISO 146:1984,"Metallic materials — Hardness test — Verification of Vickers hardness testing machines HV 0,2 to HV 100","Matériaux métalliques — Essai de dureté — Contrôle des machines d'essai de dureté Vickers HV 0,2 à HV 100",1984-12-01,1,['77.040.10'],ISO/TC 164/SC 3,9599,,[24833],"['en','fr']",5,

3975,IS,,ISO 146-2:1993,"Metallic materials — Verification of Vickers hardness testing machines — Part 2: Less than HV 0,2","Matériaux métalliques — Contrôle des machines d'essai de dureté Vickers — Partie 2: Inférieure à HV 0,2",1993-07-08,1,['77.040.10'],ISO/TC 164/SC 3,9599,,[24833],"['en','fr']",5,

6052,IS,,ISO 1460:1973,Metallic coatings — Hot dip galvanized coatings on ferrous materials — Determination of the mass per unit area — Gravimetric method,Revêtements métalliques — Revêtements de galvanisation à chaud sur métaux ferreux — Détermination de la masse par unité de surface — Méthode gravimétrique,1973-07-01,1,['25.220.40'],ISO/TC 107/SC 4,9599,,[6054],"['en','fr']",2,

6054,IS,,ISO 1460:1992,Metallic coatings — Hot dip galvanized coatings on ferrous materials — Gravimetric determination of the mass per unit area,Revêtements métalliques — Revêtements de galvanisation à chaud sur métaux ferreux — Détermination gravimétrique de la masse par unité de surface,1992-10-08,2,['25.220.40'],ISO/TC 107/SC 4,9599,[6052],[79581],"['en','fr']",2,"<p>The method is based on dissolving the coating on a surface of known area in inhibited acid and determination of the resultant loss in mass by weighing the sample before and after dissolving. Since knowledge of area of the surface is essential, it is mainly applicable to shapes whose areas are easy to determine.</p>"

24916,IS,,ISO 14602:1998,Non-active surgical implants — Implants for osteosynthesis — Particular requirements,Implants chirurgicaux non actifs — Implants pour ostéosynthèse — Exigences particulières,1998-05-21,1,['11.040.40'],ISO/TC 150/SC 5,9599,,[52671],"['en','fr']",8,

23967,IS,,ISO 14606:2000,Surface chemical analysis — Sputter depth profiling — Optimization using layered systems as reference materials,Analyse chimique des surfaces — Profilage d'épaisseur par bombardement — Optimisation à l'aide de systèmes mono- ou multicouches comme matériaux de référence,2000-10-05,1,['71.040.40'],ISO/TC 201/SC 4,9599,,[63272],"['en','fr']",15,

63272,IS,,ISO 14606:2015,Surface chemical analysis — Sputter depth profiling — Optimization using layered systems as reference materials,Analyse chimique des surfaces — Profilage d'épaisseur par bombardement — Optimisation à l'aide de systèmes mono- ou multicouches comme matériaux de référence,2015-12-01,2,['71.040.40'],ISO/TC 201/SC 4,9599,[23967],[83238],['en'],16,"<p>ISO 14606:2015 gives guidance on the optimization of sputter-depth profiling parameters using appropriate single-layered and multilayered reference materials in order to achieve optimum depth resolution as a function of instrument settings in Auger electron spectroscopy, X-ray photoelectron spectroscopy and secondary ion mass

24060,IS,,ISO 14607:2002,Implants for surgery — Specific requirements for mammary implants,Implants chirurgicaux — Exigences spécifiques relatives aux implants mammaires,2002-11-05,1,['11.040.40'],ISO/TC 150,9599,,[38760],"['en','fr']",16,"<p>ISO 14607:2002 provides specific requirements for mammary implants for clinical practice.</p><p>With regard to safety, it specifies intended performance, design attributes, materials, design evaluation, manufacturing, sterilization, packaging and information supplied by the manufacturer.</p>"

38760,IS,,ISO 14607:2007,Non-active surgical implants — Mammary implants — Particular requirements,Implants chirurgicaux non actifs — Implants mammaires — Exigences particulières,2007-01-29,2,['11.040.40'],ISO/TC 150,9599,[24060],[63973],"['en','fr','ru']",28,"<p>ISO 14607:2007 specifies particular requirements for mammary implants for clinical practice.</p><p>With regard to safety, ISO 14607:2007 specifies requirements for intended performance, design attributes, materials, design evaluation, manufacturing, sterilization, packaging and information supplied by the manufacturer.</p>"

63973,IS,,ISO 14607:2018,Non-active surgical implants — Mammary implants — Particular requirements,Implants chirurgicaux non actifs — Implants mammaires — Exigences particulières,2018-04-13,3,['11.040.40'],ISO/TC 150,9599,[38760],[82020],"['en','fr']",41,"<p>ISO 14607:2018 specifies particular requirements for mammary implants.</p><p>With regard to safety, this document specifies requirements for intended performance, design attributes, materials, design evaluation, manufacturing, packaging, sterilization, and information supplied by the manufacturer.</p>"

6055,IS,,ISO 1461:1973,Metallic coatings — Hot dip galvanized coatings on fabricated ferrous products — Requirements,Revêtements métalliques — Revêtements de galvanisation à chaud sur produits finis en fer — Spécification,1973-11-01,1,['25.220.40'],ISO/TC 107/SC 4,9599,,[6056],"['en','fr']",2,

6056,IS,,ISO 1461:1999,Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods,Revêtements par galvanisation à chaud sur produits finis ferreux — Spécifications et méthodes d'essai,1999-02-04,2,['25.220.40'],ISO/TC 107/SC 4,9599,"[6051,6055]",[43431],"['en','fr']",15,

43431,IS,,ISO 1461:2009,Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods,Revêtements par galvanisation à chaud sur produits finis en fonte et en acier — Spécifications et méthodes d'essai,2009-05-07,3,['25.220.40'],ISO/TC 107/SC 4,9599,[6056],[81435],"['en','fr','ru']",16,"<p>ISO 1461:2009 specifies the general properties of coatings and test methods for coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not more than 2 % of other metals). It does not apply to the following:</p><ol><li>sheet, wire and woven or welded mesh products that are continuously hot dip galvanized;</l

24954,IS,,ISO 14612:2004,Ships and marine technology — Ship's bridge layout and associated equipment — Additional requirements and guidelines for centralized and integrated bridge functions,Navires et technologie maritime — Aménagement de la passerelle d'un navire et disposition de ses équipements annexes — Exigences supplémentaires et directives pour les fonctions centralisées et intégrées de la passerelle,2004-07-02,1,['47.020.50'],ISO/TC 8/SC 6,9599,,[43040],['en'],24,"<p>ISO 14612:2004 specifies technical requirements for the enhanced functionality of ship's bridge layout and design, with the key navigational functions centralized and integrated, for the purpose of securing safe and effi

33384,IS,,ISO 14617-1:2002,Graphical symbols for diagrams — Part 1: General information and indexes,Symboles graphiques pour schémas — Partie 1: Informations générales et index,2002-09-19,1,['01.080.30'],ISO/TC 10/SC 10,9599,,[41838],"['en','fr']",46,"<p>This part of ISO 14617 serves as an introduction to all the other parts. In particular, it gives information on the creation and use of registration numbers for identifying graphical symbols used in diagrams, rules for the presentation and application of these symbols, and examples of their use and application. It includes three indexes: an alphabetic index and an index of registration numbers, both concerned uniquely with ISO 14617-2 to ISO

41838,IS,,ISO 14617-1:2005,Graphical symbols for diagrams — Part 1: General information and indexes,Symboles graphiques pour schémas — Partie 1: Informations générales et index,2005-07-29,2,['01.080.30'],ISO/TC 10/SC 10,9599,[33384],[85641],['en'],56,"<p>ISO 14617-1:2005 serves as an introduction to all the other parts of ISO 14617. In particular, it gives information on the creation and use of registration numbers for identifying graphical symbols used in diagrams, rules for the presentation and application of these symbols, and examples of their use and application. It includes three indexes: an alphabetic index and an index of registration numbers -- both concerned uniquely with ISO 14617

33389,IS,,ISO 14617-10:2002,Graphical symbols for diagrams — Part 10: Fluid power converters,Symboles graphiques pour schémas — Partie 10: Convertisseurs pour transmissions hydrauliques et pneumatiques,2002-09-19,1,"['01.080.30','23.100.01']",ISO/TC 10/SC 10,9599,,[83364],"['en','fr']",13,<p>This part of ISO 14617 specifies graphical symbols for fluid power conversion units (such as pumps and motors) in diagrams.</p>

33390,IS,,ISO 14617-11:2002,Graphical symbols for diagrams — Part 11: Devices for heat transfer and heat engines,"Symboles graphiques pour schémas — Partie 11: Dispositifs pour échanges thermiques, et moteurs thermiques",2002-09-19,1,"['01.080.30','27.010']",ISO/TC 10/SC 10,9599,,[83364],"['en','fr']",11,<p>This part of ISO 14617 specifies graphical symbols for heat transfer and heat engines in diagrams.</p>

33391,IS,,ISO 14617-12:2002,"Graphical symbols for diagrams — Part 12: Devices for separating, purification and mixing","Symboles graphiques pour schémas — Partie 12: Dispositifs de séparation, de purification et de mélange",2002-09-19,1,['01.080.30'],ISO/TC 10/SC 10,9599,,[83364],"['en','fr']",10,"<p>This part of ISO 14617 specifies graphical symbols for the representation of devices for separating, purification and mixing in diagrams.</p>"

32516,IS,,ISO 14617-13:2004,Graphical symbols for diagrams — Part 13: Devices for material processing,Symboles graphiques pour schémas — Partie 13: Dispositifs de transformation des matériaux,2004-11-23,1,['01.080.30'],ISO/TC 10/SC 10,9599,,[83364],"['en','fr']",5,<p>ISO 14617-13:2004 specifies graphical symbols in diagrams for casting machines and machine tools.</p>

32822,IS,,ISO 14617-14:2004,Graphical symbols for diagrams — Part 14: Devices for transport and handling of material,Symboles graphiques pour schémas — Partie 14: Dispositifs pour le transport et la manutention des matériaux,2004-11-23,1,"['01.080.30','53.040.01']",ISO/TC 10/SC 10,9599,,[83364],"['en','fr']",8,<p>ISO 14617-14:2004 specifies graphical symbols in diagrams for components and devices for material transport and handling.</p>

22668,IS,,ISO 14617-15:2002,Graphical symbols for diagrams — Part 15: Installation diagrams and network maps,Symboles graphiques pour schémas — Partie 15: Schémas d'installation et cartes de réseau,2002-11-15,1,"['01.080.30','91.140.01']",ISO/TC 10/SC 10,9599,,[83364],"['en','fr']",14,"<p>ISO 14617-15:2002 specifies graphical symbols for use on installation diagrams (e.g. for buildings) and network maps, supplementing the symbols specified in ISO 14617-2 to ISO 14617-12. Symbols on such diagrams are used mainly to indicate the location and type of a component or device.</p>"

22650,IS,,ISO 14617-2:2002,Graphical symbols for diagrams — Part 2: Symbols having general application,Symboles graphiques pour schémas — Partie 2: Symboles d'application générale,2002-09-19,1,['01.080.30'],ISO/TC 10/SC 10,9599,,[83364],"['en','fr']",24,"<p>This part of ISO 14617 specifies graphical symbols of a general character, mainly for use in building-up complete symbols representing specific products and functions in diagrams. </p>"

22651,IS,,ISO 14617-3:2002,Graphical symbols for diagrams — Part 3: Connections and related devices,Symboles graphiques pour schémas — Partie 3: Connexions et dispositifs associés,2002-09-19,1,"['01.080.30','23.040.01']",ISO/TC 10/SC 10,9599,,[83364],"['en','fr']",15,"<p>This part of ISO 14617 specifies graphical symbols for functional connections, mechanical links, pipelines and related devices such as connection joints, ports, terminals, quick-release couplings and connectors, in diagrams. </p>"

22652,IS,,ISO 14617-4:2002,Graphical symbols for diagrams — Part 4: Actuators and related devices,Symboles graphiques pour schémas — Partie 4: Organes de commande et dispositifs associés,2002-09-19,1,['01.080.30'],ISO/TC 10/SC 10,9599,[15795],[83364],"['en','fr']",15,"<p>This part of ISO 14617 specifies graphical symbols for basic elements in actuators, complete actuators and actuating devices in diagrams. </p>"

22653,IS,,ISO 14617-5:2002,Graphical symbols for diagrams — Part 5: Measurement and control devices,Symboles graphiques pour schémas — Partie 5: Dispositifs de mesure et appareils de commande,2002-09-19,1,['01.080.30'],ISO/TC 10/SC 10,9599,[15795],[83364],"['en','fr']",17,"<p>This part of ISO 14617 specifies graphical symbols for components and devices used in measurement and control systems, represented in diagrams. </p>"

22654,IS,,ISO 14617-6:2002,Graphical symbols for diagrams — Part 6: Measurement and control functions,Symboles graphiques pour schémas — Partie 6: Fonctions de mesurage et de contrôle,2002-09-19,1,['01.080.30'],ISO/TC 10/SC 10,9599,,[83364],"['en','fr']",23,"<p>This part of ISO 14617 specifies graphical symbols for measurement and control functions in diagrams, the same symbols in simple applications possibly representing instead components or devices implementing such functions.</p>"

33385,IS,,ISO 14617-7:2002,Graphical symbols for diagrams — Part 7: Basic mechanical components,Symboles graphiques pour schémas — Partie 7: Éléments mécaniques de base,2002-09-19,1,['01.080.30'],ISO/TC 10/SC 10,9599,,[83364],"['en','fr']",10,"<p>This part of ISO 14617 specifies graphical symbols in diagrams for mechanical elements such as weights, springs, clutches and brakes, pipe and duct elements such as restrictors, nozzles and air vents, and devices for storage such as tanks, pressure vessels and gas bottles.</p>"

33386,IS,,ISO 14617-8:2002,Graphical symbols for diagrams — Part 8: Valves and dampers,Symboles graphiques pour schémas — Partie 8: Appareils de robinetterie et registres,2002-09-19,1,"['01.080.30','23.060.01']",ISO/TC 10/SC 10,9599,,[83364],"['en','fr']",23,"<p>This part of ISO 14617 specifies graphical symbols for valves and dampers in diagrams, including symbols for general-purpose valves, those used in fluid power systems and hygienic valves used in the food and pharmaceutical industries.</p>"

33388,IS,,ISO 14617-9:2002,"Graphical symbols for diagrams — Part 9: Pumps, compressors and fans","Symboles graphiques pour schémas — Partie 9: Pompes, compresseurs et ventilateurs",2002-09-19,1,"['23.140','01.080.30','23.080','23.120']",ISO/TC 10/SC 10,9599,,[83364],"['en','fr']",10,"<p>This part of ISO 14617 specifies graphical symbols for pumps, compressors and fans, used mainly for transportation, in diagrams. </p>"

36672,IS,,ISO 14619:2003,Space systems — Space experiments — General requirements,Systèmes spatiaux — Expériences spatiales — Exigences générales,2003-10-22,1,['49.140'],ISO/TC 20/SC 14,9599,,[81694],"['en','fr']",11,"<p>ISO 14619:2003 specifies the procedure for preparing and carrying out space experiments and processing the resulting data, and applies to both manned and unmanned space systems, excluding exploratory rockets with associated probes. It may be tailored to the specific needs of different kinds of experiments and their carrier space vehicles.</p>"

6057,IS,,ISO 1462:1973,Metallic coatings — Coatings other than those anodic to the basis metal — Accelerated corrosion tests — Method for the evaluation of the results,Revêtements métalliques — Dépôts électrolytiques non anodiques par rapport au métal de base — Essais de corrosion accélérée — Méthode d'évaluation des résultats,1973-07-01,1,['25.220.40'],ISO/TC 107/SC 7,9599,,[18331],"['en','fr']",4,

29766,IS,,ISO 14620-1:2002,Space systems — Safety requirements — Part 1: System safety,Systèmes spatiaux — Exigences de sécurité — Partie 1: Sécurité système,2002-11-25,1,['49.140'],ISO/TC 20/SC 14,9599,,[67837],['en'],37,"<p>ISO 14620-1:2002 defines the safety programme and the technical safety requirements that are implemented in order to comply with the safety policy as defined in ISO 14300-2. It is intended to protect flight and ground personnel, the launch vehicle, associated payloads, ground support equipment, the general public, public and private property, and the environment from hazards associated with space systems. Launch site operations are described by ISO 14620-2.</p><p>The sa

29765,IS,,ISO 14620-2:2000,Space systems — Safety requirements — Part 2: Launch site operations,Systèmes spatiaux — Exigences de sécurité — Partie 2: Opérations sur le site de lancement,2000-11-23,1,['49.140'],ISO/TC 20/SC 14,9599,,[46182],"['en','fr']",15,

46182,IS,,ISO 14620-2:2011,Space systems — Safety requirements — Part 2: Launch site operations,Systèmes spatiaux — Exigences de sécurité — Partie 2: Opérations sur le site de lancement,2011-08-10,2,['49.140'],ISO/TC 20/SC 14,9599,[29765],[74116],['en'],16,"<p>ISO 14620:2011 specifies requirements for the safety liabilities of countries undertaking space activities or allowing operators to perform space activities on or from their territory under outer space treaties adopted by the United Nations. It defines the safety responsibilities for the operators involved in commercial or non-commercial space launch activities. ISO 14620:2011 establishes the overall safety requirements to be observed

34865,IS,,ISO 14620-3:2005,Space systems — Safety requirements — Part 3: Flight safety systems,Systèmes spatiaux — Exigences de sécurité — Partie 3: Systèmes de sauvegarde en vol,2005-05-13,1,['49.140'],ISO/TC 20/SC 14,9599,,[81677],"['en','fr']",7,"<p>ISO 14620-3:2005 sets out the minimum requirements for Flight Safety Systems, including flight termination systems (externally controlled system or on-board automatic system), tracking systems, and telemetry data transmitting systems for commercial or non commercial launch activities of orbital or sub-orbital, unmanned space vehicles. The intent is to minimize the risk of injury or damage to persons, property or the environment resulting from

29306,IS,,ISO 14621-1:2003,"Space systems — Electrical, electronic and electromechanical (EEE) parts — Part 1: Parts management","Systèmes spatiaux — Composants électriques, électroniques et électromécaniques (EEE) — Partie 1: Gestion des composants",2003-11-19,1,['49.140'],ISO/TC 20/SC 14,9599,,[71610],"['en','fr']",45,<p>ISO 14621-1:2003 addresses the preferred program elements recommended for EEE parts. ISO 14621-1:2003 is written in general terms as a baseline for developing and implementing a parts program.</p>

29307,IS,,ISO 14621-2:2003,"Space systems — Electrical, electronic and electromechanical (EEE) parts — Part 2: Control programme requirements","Systèmes spatiaux — Composants électriques, électroniques et électromécaniques (EEE) — Partie 2: Exigences du programme de contrôle",2003-07-30,1,['49.140'],ISO/TC 20/SC 14,9599,,[71611],"['en','fr']",6,"<p>ISO 14621-2:2003 establishes technical guidelines for developing and documenting an electrical, electronic and electromechanical (EEE) parts control program, in order to assure that the parts used in the flight hardware are acceptable and possess adequate functional, radiation and reliability characteristics to meet the system requirements. These

24677,IS,,ISO 14622:2000,Space systems — Structural design — Loads and induced environment,Systèmes spatiaux — Conception des structures — Charges et environnement induit,2000-12-21,1,['49.140'],ISO/TC 20/SC 14,9599,,[85532],"['en','fr']",9,"<p>This International Standard defines the principles used to determine loads and the induced environment during the</p><p>service life of a space flight vehicle and its components, taking account of the notions of probability, combined</p><p>loads, corresponding safety factors and lifecycle.</p>"

28953,IS,,ISO 14624-1:2003,Space systems — Safety and compatibility of materials — Part 1: Determination of upward flammability of materials,Systèmes spatiaux — Sécurité et compatibilité des matériaux — Partie 1: Détermination de l'inflammabilité verticale des matériaux,2003-06-11,1,"['13.220.40','49.025.01','49.140']",ISO/TC 20/SC 14,9599,,"[59984,81188]","['en','fr']",15,"<p>ISO 14624-1:2003 specifies a method for the determination of the flammability of aerospace materials by upward flame propagation. Specifically, this test determines if a material, when exposed to a standard ignition source, will self-extinguish and not transfer burning debris to adjacent materials which can be ignited

28954,IS,,ISO 14624-2:2003,Space systems — Safety and compatibility of materials — Part 2: Determination of flammability of electrical-wire insulation and accessory materials,"Systèmes spatiaux — Sécurité et compatibilité des matériaux — Partie 2: Détermination de l'inflammabilité des systèmes d'isolation des fils électriques, et des matériaux accessoires",2003-06-11,1,"['13.220.40','49.025.01','49.140']",ISO/TC 20/SC 14,9599,,"[81189,59985]","['en','fr']",19,<p>ISO 14624-2:2003 specifies two test methods for determining the flammability of electrical-wire insulation and accessory materials by exposure to an external ignition source in a static environment (Test A) and in a gas-flow environm

28955,IS,,ISO 14624-3:2005,Space systems — Safety and compatibility of materials — Part 3: Determination of offgassed products from materials and assembled articles,Systèmes spatiaux — Sécurité et compatibilité des matériaux — Partie 3: Détermination des produits issus du dégazage sous atmosphère des matériaux et des articles assemblés,2005-01-05,1,"['49.025.01','49.140']",ISO/TC 20/SC 14,9599,,"[59986,81190]","['en','fr']",11,"<p>ISO 14624-3:2005 specifies a method for determining the identity and quantity of volatile offgassed products from materials and assembled articles utilized in manned, pressurized spacecraft. This test method is not intended to model or simulate spacecraft atmospher

37194,IS,,ISO 14624-5:2006,Space systems — Safety and compatibility of materials — Part 5: Determination of reactivity of system/component materials with aerospace propellants,Systèmes spatiaux — Sécurité et compatibilité des matériaux — Partie 5: Détermination de la réactivité des matériaux des systèmes/composants avec les ergols spatiaux,2006-04-19,1,"['49.025.01','49.140']",ISO/TC 20/SC 14,9599,,[67296],['en'],11,"<p>ISO 14624-5:2006 specifies test equipment and techniques used to identify interactions resulting from exposure of a material to an aerospace fluid.</p><p>ISO 14624-5:2006 may be used to determine the reactivity of system and component materials with aerospace fluids. It is ap

24686,IS,,ISO 14625:1999,"Space systems — Ground support equipment for use at launch, landing, or retrieval sites— General requirements","Systèmes spatiaux — Équipements de soutien au sol utilisés sur les sites de lancement, d'atterrissage ou de récupération — Exigences générales",1999-03-18,1,"['49.100','49.140']",ISO/TC 20/SC 14,9599,,[43581],"['en','fr']",22,

43581,IS,,ISO 14625:2007,"Space systems — Ground support equipment for use at launch, landing or retrieval sites — General requirements","Systèmes spatiaux — Équipements de soutien au sol utilisés sur les sites de lancement, d'atterrissage ou de récupération — Exigences générales",2007-10-22,2,"['49.100','49.140']",ISO/TC 20/SC 14,9599,[24686],[78977],"['en','fr']",24,"<p>ISO 14625:2007 specifies the general characteristics, performance, design, test, safety, reliability, maintainability and quality requirements for ground support equipment (GSE) and systems intended for use at launch, landing or retrieval-site installations, or other locations that are the responsibility of the launch, land

6058,IS,,ISO 1463:1982,Metallic and oxide coatings — Measurement of coating thickness — Microscopical method,Revêtements métalliques et couches d'oxyde — Mesurage de l'épaisseur — Méthode par coupe micrographique,1982-07-01,2,"['25.220.20','25.220.40']",ISO/TC 107,9599,,[31239],"['en','fr']",5,"<p>This second edition cancels and replaces the first edition (i. e. ISO 1463:1973). Applies to the measurement of the local thickness of metallic coatings, oxide layers, and porcelain or vitreous enamel coatins, by using an optical microscope. The method is capable of giving an absolute measuring accuracy of 0,8 /u, this will determine the suitability of the method for measuring the thickness of thin

31239,IS,,ISO 1463:2003,Metallic and oxide coatings — Measurement of coating thickness — Microscopical method,Revêtements métalliques et couches d'oxyde — Mesurage de l'épaisseur de revêtement — Méthode par coupe micrographique,2003-03-12,3,"['25.220.20','25.220.40']",ISO/TC 107,9599,[6058],[78374],"['en','fr']",11,"<p>ISO 1463:2002 describes a method for the measurement of the local thickness of metallic coatings, oxide layers, and porcelain or vitreous enamel coatings, by the microscopical examination of cross-sections using an optical microscope.</p>"

24986,IS,,ISO 14630:1997,Non-active surgical implants — General requirements,Implants chirurgicaux non actifs — Exigences générales,1997-10-30,1,['11.040.40'],ISO/TC 150,9599,,[37619],"['en','fr']",9,

37619,IS,,ISO 14630:2005,Non-active surgical implants — General requirements,Implants chirurgicaux non actifs — Exigences générales,2005-05-04,2,['11.040.40'],ISO/TC 150,9599,[24986],[42966],"['en','fr','ru']",13,"<p>ISO 14630:2005 specifies general requirements for non-active surgical implants, hereafter referred to as implants. It is not applicable to dental implants, dental restorative materials, transendodontic and transradicular implants and intra-ocular lenses.</p><p>With regard to safety, ISO 14630:2005 gives requirements for intended performance, design attributes, materials, design evaluation, manufacture, sterilization, packaging and information supplied by the manufacturer, and te

42966,IS,,ISO 14630:2008,Non-active surgical implants — General requirements,Implants chirurgicaux non actifs — Exigences générales,2008-01-07,3,['11.040.40'],ISO/TC 150,9599,[37619],[61749],"['en','fr','ru']",14,"<p>ISO 14630:2008 specifies general requirements for non-active surgical implants. ISO 14630:2008 is not applicable to dental implants, dental restorative materials, transendodontic and transradicular implants, intra-ocular lenses and implants utilizing viable animal tissue.</p><p>With regard to safety, ISO 14630:2008 gives requirements for intended performance, design attributes, materials, design evaluation, manufacture, sterilization, packaging and information supplied by the ma

61749,IS,,ISO 14630:2012,Non-active surgical implants — General requirements,Implants chirurgicaux non actifs — Exigences générales,2012-11-28,4,['11.040.40'],ISO/TC 150,9599,"[42966,56143]",[76810],"['en','fr','ru']",13,"<p>ISO 14630:2012 specifies general requirements for non-active surgical implants. ISO 14630:2012 is not applicable to dental implants, dental restorative materials, transendodontic and transradicular implants, intra-ocular lenses and implants utilizing viable animal tissue.</p><p>With regard to safety, ISO 14630:2012 specifies requirements for intended performance, design attributes, materials, design evaluation, manufacture, sterilization, packaging and information suppli

24988,IS,,ISO 14631:1999,Extruded sheets of impact-modified polystyrene (PS-I) — Requirements and test methods,Plaques extrudées en polystyrène modifié résistant au choc (PS-I) — Prescriptions et méthodes d'essai,1999-02-04,1,['83.140.10'],ISO/TC 61/SC 11,9599,,[82373],"['en','fr']",12,"<p>This standard specifies the requirements and test methods for solid flat extruded sheets of impact-modified polystyrene (PS-I1) without fillers and reinforcing materials. This standard applies only to thickness 0,25 mm to 20,0 mm in accordance with clause 3. This standard also applies to PS-I sheet in roll form.</p>"

24989,IS,,ISO 14632:1998,Extruded sheets of polyethylene (PE-HD) — Requirements and test methods,Plaques extrudées en polyéthylène (PE-HD) — Prescriptions et méthodes d'essai,1998-12-20,1,['83.140.10'],ISO/TC 61/SC 11,9599,,[80198],"['en','fr']",9,"<p>This standard specifies the requirements and test methods for solid flat extruded sheets of polyethylene homopolymers (PE - HD) without fillers or reinforcing materials. This standard applies only to thicknesses of 0,5 mm to 40 mm. This standard also applies to PE - HD sheet in rolled form.</p>"

25004,IS,,ISO 14635-1:2000,"Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils","Engrenages — Méthodes d'essai FZG — Partie 1: Méthode FZG A/8,3/90 pour évaluer la capacité de charge au grippage des huiles",2000-06-08,1,['21.200'],ISO/TC 60/SC 2,9599,,[86086],"['en','fr']",17,"<p>This part of ISO 14635 specifies a test method based on an FZG2_ four-square test machine to determine the</p><p>relative load-carrying capacity of lubricating oils defined by the gear-surface damage known as scuffing. High</p><p>surface temperatures due to high surface pressures and sliding velocities can initiate the breakdown of the</p><p>lubricant

29603,IS,,ISO 14635-2:2004,"Gears — FZG test procedures — Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils","Engrenages — Méthodes d'essai FZG — Partie 2: Méthode FZG A10/16, 6R/120 à paliers de charge pour évaluer la capacité de charge au grippage des huiles à valeurs EP élevées",2004-03-30,1,['21.200'],ISO/TC 60/SC 2,9599,,"[86337,68277]","['en','fr']",19,"<p>ISO 14635-2:2004 specifies a test method based on an FZG four-square test machine for determining the relative load-carrying capacity of high EP oils defined by the gear surface damage known as scuffing. The method is useful for evaluating the scuffing load capacity potential of oi

38873,IS,,ISO 14635-3:2005,"Gears — FZG test procedures — Part 3: FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases","Engrenages — Méthodes d'essai FZG — Partie 3: Méthode FZG A/2, 8/50 pour évaluer la capacité de charge au grippage et les caractéristiques d'usure des graisses d'engrenages semi-fluides",2005-09-07,1,['21.200'],ISO/TC 60/SC 2,9599,,[86087],"['en','fr']",19,"<p>ISO 14635-3:2005 specifies a test method based on an FZG four-square test machine for determining the relative load-carrying capacity of semi-fluid gear greases defined by the gear surface damage known as scuffing. This method is useful for evaluati

6059,IS,,ISO 1464:1979,Aircraft — Clearance dimensions for tripod jacks,Aéronefs — Dimensions d'encombrement des vérins de levage tripodes,1979-09-01,1,['49.100'],ISO/TC 20,9599,,[6060],"['en','fr']",2,

6060,IS,,ISO 1464:1985,Aerospace — Tripod jacks — Clearance dimensions,Aéronautique — Vérins de levage tripodes — Dimensions d'encombrement,1985-05-16,2,['49.100'],ISO/TC 20/SC 9,9599,[6059],[70672],"['en','fr']",4,"<p>Specifies the minimum clear space to be provided beneath the aircraft main jacking points. Is not intended to define fully all jack clearance deminsions. In situations where clearances are critical, it should be used as a design aid only. Final critical clearances should be established by using actual jack dimensions.</p>"

54911,IS,,ISO 14641-1:2012,Electronic archiving — Part 1: Specifications concerning the design and the operation of an information system for electronic information preservation,Archivage électronique — Partie 1: Spécifications relatives à la conception et au fonctionnement d'un système d'informations pour la conservation d'informations électroniques,2012-01-24,1,['37.080'],ISO/TC 171/SC 1,9599,,[74338],['en'],38,

25052,IS,,ISO 14644-1:1999,Cleanrooms and associated controlled environments — Part 1: Classification of air cleanliness,Salles propres et environnements maîtrisés apparentés — Partie 1: Classification de la propreté de l'air,1999-05-06,1,['13.040.35'],ISO/TC 209,9599,,[53394],"['en','fr']",18,