Withdrawn and superseded ISO standards — page 43 of 246

68430,IS,,ISO 14404-3:2017,Calculation method of carbon dioxide emission intensity from iron and steel production — Part 3: Steel plant with electric arc furnace (EAF) and coal-based or gas-based direct reduction iron (DRI) facility,Méthode de calcul de l'intensité de l'émission de dioxyde de carbone de la production de la fonte et de l'acier — Partie 3: Usine de fabrication d'acier dans des fours électriques à arc (FÉA) et installations de production de minerais de fer préréduits avec procédés au charbon ou au gaz,2017-05-31,1,"['77.080.01','13.020.40']",ISO/TC 17/SC 21,9599,,[85990],['en'],20,"<p>ISO 14404-3:2017 specifies calculation methods applicable to those companies using an electric

44209,IS,,ISO 14405-1:2010,Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes,Spécification géométrique des produits (GPS) — Tolérancement dimensionnel — Partie 1: Tailles linéaires,2010-12-06,1,['17.040.10'],ISO/TC 213,9599,,[65202],"['en','fr']",35,"<p>ISO 14405-1:2010 establishes the default specification operator for linear size and defines a number of special specification operators for linear size for feature of size types “cylinder” and “two parallel opposite planes”. It also defines the specification modifiers and the drawing indications for these linear sizes. It covers the following linear sizes: local size; global size; calculated size; and r

65202,IS,,ISO 14405-1:2016,Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes,Spécification géométrique des produits (GPS) — Tolérancement dimensionnel — Partie 1: Tailles linéaires,2016-08-04,2,['17.040.10'],ISO/TC 213,9599,[44209],[80703],"['en','fr']",56,"<p>ISO 14405-1:2016 establishes the default specification operator (see ISO 17450‑2) for linear size and defines a number of special specification operators for linear size for features of size, e.g. 'cylinder', 'sphere', 'torus,'[1], 'circle', 'two parallel opposite planes', or 'two parallel opposite straight lines'.</p><p>It also defines the specification modifiers and the drawing indications for

54013,IS,,ISO 14405-2:2011,Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes,Spécification géométrique des produits (GPS) — Tolérancement dimensionnel — Partie 2: Dimensions autres que tailles linéaires,2011-11-23,1,['17.040.10'],ISO/TC 213,9599,[4408],[75447],"['en','fr']",23,"<p>ISO 14405-2:2011 illustrates the use of geometrical tolerancing for dimensions that are not linear sizes to avoid the ambiguity that the use of ± tolerances on these dimensions causes. Both linear and angular dimensions, except size of features of size, are covered. </p><p>Dimensional tolerancing can be indicated by ± tolerancing or geometrical toleranci

24241,IS,,ISO 14408:1998,Tracheal tubes designed for laser surgery — Requirements for marking and accompanying information,Sondes trachéales destinées aux opérations au laser — Exigences relatives au marquage et aux informations d'accompagnement,1998-07-02,1,['11.040.10'],ISO/TC 121/SC 2,9599,,[37798],['en'],5,

37798,IS,,ISO 14408:2005,Tracheal tubes designed for laser surgery — Requirements for marking and accompanying information,Tubes trachéaux destinés aux opérations laser — Exigences relatives au marquage et aux informations d'accompagnement,2005-06-10,2,['11.040.10'],ISO/TC 121/SC 2,9599,[24241],[63262],"['en','fr']",6,"<p>ISO 14408:2005 specifies marking, labelling and information supplied by the manufacturer for cuffed and uncuffed tracheal tubes and related materials designed to resist ignition by a laser.</p>"

24279,IS,,ISO 14419:1998,Textiles — Oil repellency — Hydrocarbon resistance test,Textiles — Oléofugation — Essai de résistance aux hydrocarbures,1998-09-17,1,['59.080.01'],ISO/TC 38/SC 2,9599,,[54877],"['en','fr']",7,

41020,IS,Cor,ISO 14419:1998/Cor 1:2004,Textiles — Oil repellency — Hydrocarbon resistance test — Technical Corrigendum 1,Textiles — Oléofugation — Essai de résistance aux hydrocarbures — Rectificatif technique 1,2004-09-15,1,['59.080.01'],ISO/TC 38/SC 2,9599,,[54877],"['en','fr']",1,

54877,IS,,ISO 14419:2010,Textiles — Oil repellency — Hydrocarbon resistance test,Textiles — Oléofugation — Essai de résistance aux hydrocarbures,2010-02-25,2,['59.080.01'],ISO/TC 38/SC 2,9599,"[41020,24279]",[82561],"['en','fr']",7,"<p>ISO 14419:2010 is applicable to the evaluation of a substrate's resistance to absorption of a selected series of liquid hydrocarbons of different surface tensions.</p><p>ISO 14419:2010 is intended to provide a guide to oil stain resistance. It can provide a rough index of oil stain resistance as, generally, the higher the oil repellency grade, the better resistance to staining by oily materials, especially liquid oil substances. This is particularly true when

6036,IS,,ISO 1442:1973,Meat and meat products — Determination of moisture content,Viandes et produits à base de viande — Détermination de l'humidité,1973-04-01,1,['67.120.10'],ISO/TC 34/SC 6,9599,,[6037],"['en','fr']",2,

6037,IS,,ISO 1442:1997,Meat and meat products — Determination of moisture content (Reference method),Viande et produits à base de viande — Détermination de l'humidité (Méthode de référence),1997-01-22,2,['67.120.10'],ISO/TC 34/SC 6,9599,[6036],[82664],"['en','fr']",4,<p>Describes a reference method for the determination of the moisture content of meat and meat products. Replaces the first edition.</p>

24280,IS,,ISO 14420:2005,Carbonaceous products for the production of aluminium — Baked anodes and shaped carbon products — Determination of the coefficient of linear thermal expansion,Produits carbonés utilisés pour la production de l'aluminium — Anodes cuites et produits carbonés formés — Détermination du coefficient de dilatation thermique,2005-07-06,1,['71.100.10'],ISO/TC 226,9599,,[69891],['en'],5,<p>ISO 14420:2005 specifies a method to determine the coefficient of linear thermal expansion of carbonaceous or graphite materials (solid materials) for the production of aluminium between 20 °C and 300 °C. It applies to baked anodes and shaped carbon products.</p>

24287,IS,,ISO 14427:2004,Carbonaceous materials used in the production of aluminium — Cold and tepid ramming pastes — Preparation of unbaked test specimens and determination of apparent density after compaction,Produits carbonés utilisés pour la production de l'aluminium — Pâtes de brasquage froides et tièdes — Préparation d'éprouvettes non cuites et détermination de la densité apparente après compactage,2004-07-16,1,['71.100.10'],ISO/TC 226,9599,,[86640],['en'],4,<p>ISO 14427:2004 describes the preparation of unbaked test specimens made by compacting carbonaceous ramming pastes. It also includes a method for the determination of the apparent density after compaction.</p>

24288,IS,,ISO 14428:2005,Carbonaceous materials for the production of aluminium — Cold and tepid ramming pastes — Expansion/shrinkage during baking,Produits carbonés utilisés pour la production de l'aluminium — Pâtes de brasquage froides et tièdes — Expansion/rétrécissement durant la cuisson,2005-08-03,1,['71.100.10'],ISO/TC 226,9599,,[73942],['en'],6,<p>ISO 14428:2005 specifies the determination of expansion/shrinkage during baking of cold and tepid ramming pastes used in the production of aluminium.</p>

6040,IS,,ISO 1444:1973,Meat and meat products — Determination of free fat content,Viandes et produits à base de viande — Détermination de la teneur en matière grasse libre,1973-04-01,1,['67.120.10'],ISO/TC 34/SC 6,9599,,[6041],"['en','fr']",2,

23755,IS,,ISO 14442:1999,"Water quality — Guidelines for algal growth inhibition tests with poorly soluble materials, volatile compounds, metals and waste water","Qualité de l'eau — Lignes directrices pour essais d'inhibition de la croissance algale avec des matières peu solubles, composés volatiles, métaux et eaux résiduaires",1999-12-16,1,['13.060.70'],ISO/TC 147/SC 5,9599,,[34814],"['en','fr']",14,

24336,IS,,ISO 14453:1997,Pulps — Determination of acetone-soluble matter,Pâtes — Détermination des matières solubles dans l'acétone,1997-08-14,1,['85.040'],ISO/TC 6,9599,[4744],[60512],"['en','fr']",4,

54790,IS,,ISO 14456:2015,Gas cylinders — Gas properties and associated classification (FTSC) codes,Bouteilles à gaz — Propriétés des gaz et codes de classification associés (FTSC),2015-09-21,1,['23.020.35'],ISO/TC 58/SC 2,9599,,[83857],"['en','fr']",17,"<p>ISO 14456:2015 gives a list of FTSC (fire potential, i.e. 'oxidizing potential and flammability', toxicity, state of the gas, and corrosiveness) codes determined according to the relevant properties of gases and of some liquids that are transported under pressure.</p>"

74688,IS,Amd,ISO 14456:2015/Amd 1:2019,Gas cylinders — Gas properties and associated classification (FTSC) codes — Amendment 1,Bouteilles à gaz — Propriétés des gaz et codes de classification associés (FTSC) — Amendement 1,2019-06-13,1,['23.020.35'],ISO/TC 58/SC 2,9599,,[83857],"['en','fr']",1,

54805,IS,,ISO 14457:2012,Dentistry — Handpieces and motors,Médecine bucco-dentaire — Pièces à main et moteurs,2012-09-11,1,['11.060.25'],ISO/TC 106/SC 4,9599,"[22723,19449,20415,20419]",[66429],"['en','fr']",22,"<p>ISO 14457:2012 is applicable to handpieces and motors used in dentistry for patient contact, regardless of their construction. It specifies requirements, test methods, manufacturer's information, marking and packaging.</p><p>ISO 14457:2012 is applicable to:</p><ol><li>straight and geared angle handpieces, including handpiece attachments;</li><li>high-speed air turbine handpieces;</li><li>air motors;</li><li>electrical motors;</li><li>prophy handpieces.</li></ol>"

6042,IS,,ISO 1446:1978,Green coffee — Determination of moisture content (Basic reference method),Café vert — Détermination de la teneur en eau (Méthode de référence fondamentale),1978-01-01,1,['67.140.20'],ISO/TC 34/SC 15,9599,,"[34008,28539,6043]","['en','fr']",5,"<p>The method consists in determinig of the loss in mass when the product, previously ground without alteration of its moisture content, is brought into equilibrium with an anhydrous atmosphere at a temperature of 48+2 °C, at a pressure of 2,0+0,7 kPa. An annex shows a suitable dish and a drying tube.</p>"

24421,IS,,ISO 14469-1:2004,Road vehicles — Compressed natural gas (CNG) refuelling connector — Part 1: 20 MPa (200 bar) connector,Véhicules routiers — Connecteur de remplissage en gaz naturel comprimé (GNC) — Partie 1: Connecteur 20 MPa (200 bar),2004-11-03,1,['43.060.40'],ISO/TC 22/SC 41,9599,,"[65064,60262]",['en'],23,"<p>ISO 14469-1:2004 specifies CNG refuelling nozzles and receptacles constructed entirely of new and unused parts and materials, for road vehicles powered by compressed natural gas. A CNG refuelling connector consists of, as applicable, the receptacle and its protective cap (mounted on the vehicle) and the nozzle. ISO 14469-1:2004 is applicable only to such devices designed

37253,IS,,ISO 14469-2:2007,"Road vehicles — Compressed natural gas (CNG) refuelling connector — Part 2: 20 MPa (200 bar) connector, size 2","Véhicules routiers — Connecteur de remplissage en gaz naturel comprimé (GNC) — Partie 2: Connecteur 20 MPa (200 bar), taille 2",2007-12-03,1,['43.060.40'],ISO/TC 22/SC 41,9599,,"[60257,65064]",['en'],24,"<p>ISO 14469-2:2007 applies to compressed natural gas (CNG) vehicle nozzles and receptacles, constructed entirely of new, unused parts and materials for which there is a demand, in particular for large CNG urban buses of refuelling times equivalent to those of urban buses driven by conventional diesel engines. The proposed connector, size 2, offers a la

40976,IS,,ISO 14469-3:2006,Road vehicles — Compressed natural gas (CNG) refuelling connector — Part 3: 25 MPa (250 bar) connector,Véhicules routiers — Connecteur de remplissage en gaz naturel comprimé (GNC) — Partie 3: Connecteur 25 MPa (250 bar),2006-07-06,1,['43.060.40'],ISO/TC 22/SC 41,9599,,"[60258,65064]",['en'],24,"<p>ISO 14469-3:2006 applies to compressed natural gas (CNG) vehicle nozzles and receptacles constructed entirely of new, unused parts and materials. CNG fuelling connection nozzles consist of the following components, as applicable:</p><ul><li>receptacle and protective cap (mounted on vehicle);</li><li>nozzle.</li></ul><p>ISO 14469-3:2006 applies to devices which have a serv

6044,IS,,ISO 1447:1978,Green coffee — Determination of moisture content (Routine method),Café vert — Détermination de la teneur en eau (Méthode de routine),1978-01-01,1,['67.140.20'],ISO/TC 34/SC 15,9599,,"[6045,28538]","['en','fr']",2,

54847,IS,,ISO 14484:2013,Performance guidelines for design of concrete structures using fibre-reinforced polymer (FRP) materials,Lignes directrices de performance pour la conception des structures en béton utilisant des polymères renforcés de fibres (PRF),2013-04-05,1,"['83.120','91.100.30','91.080.40']",ISO/TC 71/SC 6,9599,,[77500],['en'],6,"<p>ISO 14484:2013 provides general principles for the verification and assessment of the performance of concrete structures with the applications of different fibre-reinforced polymer (FRP) systems varying from internal FRP reinforcements/tendons, external FRP tendons, externally bonded FRP sheets/plates, to near-surface mounted FRP reinforcement. It ca

54853,IS,,ISO 14486:2012,Laminate floor coverings — Specification,Revêtements de sol stratifiés — Spécifications,2012-06-04,1,['97.150'],ISO/TC 219,9599,,[84839],['en'],8,"<p>ISO 14486:2012 specifies the characteristics of laminate floor coverings, supplied in either tile or plank form. To encourage the consumer to make an informed choice, the standard includes a classification system (see ISO 10874) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.</p>"

39173,IS,,ISO 14490-3:2004,Optics and optical instruments — Test methods for telescopic systems — Part 3: Test methods for telescopic sights,Optique et instruments d'optique — Méthodes d'essai pour systèmes télescopiques — Partie 3: Méthodes d'essai pour viseurs de tir,2004-01-30,1,['37.020'],ISO/TC 172/SC 4,9599,,"[50743,62429]",['en'],8,<p>ISO 14490-3:2004 specifies test equipment and test procedures for the determination of the following optical characteristics of telescopic sights:</p><ul><li> axial parallax;</li><li> parallax;</li><li> eye relief range;</li><li> reticle tracking.</li></ul>

62429,IS,,ISO 14490-3:2016,Optics and photonics — Test methods for telescopic systems — Part 3: Test methods for telescopic sights,Optique et photonique — Méthodes d'essai pour systèmes télescopiques — Partie 3: Méthodes d'essai pour viseurs de tir,2016-02-18,2,['37.020'],ISO/TC 172/SC 4,9599,[39173],"[66247,78535]",['en'],15,<p>ISO 14490-3:2016 specifies test equipment and test procedures for determination of the following optical characteristics of telescopic sights:</p><p>- axial parallax;</p><p>- parallax;</p><p>- eye relief range;</p><p>- reticle tracking;</p><p>- line of sight shift due to zooming;</p><p>- line of sight shift due to focusing.</p>

42110,IS,,ISO 14490-5:2005,Optics and optical instruments — Test methods for telescopic systems — Part 5: Test methods for transmittance,Optique et instruments d'optique — Méthodes d'essai pour systèmes télescopiques — Partie 5: Méthodes d'essai du facteur de transmission,2005-10-25,1,['37.020'],ISO/TC 172/SC 4,9599,,"[70570,62430]",['en'],12,<p>ISO 14490-5:2005 specifies the test methods for the determination of the transmittance of telescopic systems and observational telescopic instruments.</p>

66139,IS,Amd,ISO 14490-5:2005/Amd 1:2015,Optics and optical instruments — Test methods for telescopic systems — Part 5: Test methods for transmittance — Amendment 1,Optique et instruments d'optique — Méthodes d'essai pour systèmes télescopiques — Partie 5: Méthodes d'essai du facteur de transmission — Amendement 1,2015-01-31,1,['37.020'],ISO/TC 172/SC 4,9599,,"[70570,62430]",['en'],3,

70570,IS,,ISO 14490-5:2017,Optics and photonics — Test methods for telescopic systems — Part 5: Test methods for transmittance,Optique et photonique — Méthodes d'essai pour systèmes télescopiques — Partie 5: Méthodes d'essai du facteur de transmission,2017-07-26,2,['37.020'],ISO/TC 172/SC 4,9599,"[42110,66139]",[78534],['en'],14,<p>ISO 14490-5:2017 specifies the test methods for the determination of the transmittance of telescopic systems and observational telescopic instruments.</p>

42111,IS,,ISO 14490-6:2005,Optics and optical instruments — Test methods for telescopic systems — Part 6: Test methods for veiling glare index,Optique et instruments d'optique — Méthodes d'essai pour systèmes télescopiques — Partie 6: Méthodes d'essai de l'indice de lumière parasite,2005-10-21,1,['37.020'],ISO/TC 172/SC 4,9599,,[66250],['en'],8,<p>ISO 14490-6:2005 specifies the test methods for the determination of the veiling glare index of telescopic systems and observational telescopic instruments.</p>

42112,IS,,ISO 14490-7:2005,Optics and optical instruments — Test methods for telescopic systems — Part 7: Test methods for limit of resolution,Optique et instruments d'optique — Méthodes d'essai pour systèmes télescopiques — Partie 7: Méthodes d'essai pour limite de résolution,2005-10-17,1,['37.020'],ISO/TC 172/SC 4,9599,,[68890],['en'],9,<p>ISO 14490-7:2005 specifies the test methods for the determination of the limit of resolution of telescopic systems and observational telescopic instruments.</p>

24496,IS,,ISO 14501:1998,Milk and milk powder — Determination of aflatoxin M1 content — Clean-up by immunoaffinity chromatography and determination by high-performance liquid chromatography,Lait et lait en poudre — Détermination de la teneur en aflatoxine M1 — Purification par chromatographie d'immunoaffinité et détermination par chromatographie en phase liquide à haute performance,1998-11-19,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[39610],"['en','fr']",9,

39610,IS,,ISO 14501:2007,Milk and milk powder — Determination of aflatoxin M1 content — Clean-up by immunoaffinity chromatography and determination by high-performance liquid chromatography,Lait et lait en poudre — Détermination de la teneur en aflatoxine M1 — Purification par chromatographie d'immunoaffinité et détermination par chromatographie en phase liquide à haute performance,2007-10-11,2,['67.100.10'],ISO/TC 34/SC 5,9599,[24496],[75488],"['en','fr','ru']",10,"<p>ISO 14501│IDF 171:2007 specifies a method for the determination of aflatoxin M₁ content in milk and milk powder. The limit of detection is 0,08 µg/kg for whole milk powder, i.e. 0,008 µg/l for reconstituted liquid m

24539,IS,,ISO 14508:1997,Road vehicles — Spark-plugs — Terminals,Véhicules routiers — Bougies d'allumage — Bornes,1997-07-24,1,['43.060.50'],ISO/TC 22,9599,,[39779],"['en','fr']",3,

24540,IS,,ISO 14509:2000,Small craft - Measurement of airborne sound emitted by powered recreational craft,Petits navires - Mesurage du bruit aérien émis par les navires de plaisance motorisés,2000-10-26,1,"['17.140.30','47.080']",ISO/TC 188,9599,,[39532],"['en','fr']",16,

36427,IS,Amd,ISO 14509:2000/Amd 1:2004,Small craft - Measurement of airborne sound emitted by powered recreational craft — Amendment 1,Petits navires - Mesurage du bruit aérien émis par les navires de plaisance motorisés — Amendement 1,2004-09-15,1,"['17.140.30','47.080']",ISO/TC 188,9599,,[39532],"['en','fr']",3,"<p>ISO 14509:2000, Amendment 1:2004 specifies the conditions for obtaining reproducible and comparable measurement results of the maximum sound pressure level of airborne sound generated during the passage of powered recreational craft of up to 24 m length of hull including inboards, stern drives, personal watercraft (PWC) and outboard motors. It also specifies type tests for stern

24557,IS,,ISO 14511:2001,Measurement of fluid flow in closed conduits — Thermal mass flowmeters,Mesure de débit des fluides dans les conduites fermées — Débitmètres massiques par effet thermique,2001-10-18,1,['17.120.10'],ISO/TC 30/SC 5,9599,,[76490],['en'],31,

36747,IS,,ISO 14513:2006,Road vehicles — Pedestrian protection — Head impact test method,Véhicules routiers — Protection des piétons — Méthode d'essai de choc de la tête,2006-05-19,1,['43.040.80'],ISO/TC 22/SC 36,9599,,[69504],"['en','fr']",11,"<p>ISO 14513:2006 specifies a test method to simulate the head impact of an adult pedestrian to the bonnet top of passenger vehicles or light truck vehicles of up to 3,5 t (GVM), as defined in ISO 3833.The impact device to be used in this test method will be robust for a vehicle impact velocity of up to 11 m/s. The test method specified addresses the reduction of an adult pedestrian head injury risk; it does not test for injuries to other regions of t

46111,IS,Cor,ISO 14513:2006/Cor 1:2007,Road vehicles — Pedestrian protection — Head impact test method — Technical Corrigendum 1,Véhicules routiers — Protection des piétons — Méthode d'essai de choc de la tête — Rectificatif technique 1,2007-05-15,1,['43.040.80'],ISO/TC 22/SC 36,9599,,[69504],"['en','fr']",1,

23938,IS,,ISO 14520-1:2000,Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General requirements,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 1: Exigences générales,2000-08-17,1,['13.220.10'],ISO/TC 21/SC 8,9599,,[37452],"['en','fr']",62,

36161,IS,Cor,ISO 14520-1:2000/Cor 1:2002,Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General requirements — Technical Corrigendum 1,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 1: Exigences générales — Rectificatif technique 1,2002-03-07,1,['13.220.10'],ISO/TC 21/SC 8,9599,,[37452],"['en','fr']",2,

37452,IS,,ISO 14520-1:2006,Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General requirements,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 1: Exigences générales,2006-02-15,2,['13.220.10'],ISO/TC 21/SC 8,9599,"[35565,36161,23938]",[55340],"['en','ru']",85,"<p>ISO 14520-1:2005 specifies requirements and gives recommendations for the design, installation, testing, maintenance and safety of gaseous fire fighting systems in buildings, plant or other structures, and the characteristics of the various extinguishants and types of fire for which they are a suitable extinguishing medium.<

50028,IS,Cor,ISO 14520-1:2006/Cor 1:2007,Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General requirements — Technical Corrigendum 1,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 1: Exigences générales — Rectificatif technique 1,2007-08-16,2,['13.220.10'],ISO/TC 21/SC 8,9599,,[55340],"['en','ru']",2,

55340,IS,,ISO 14520-1:2015,Gaseous fire-extinguishing systems — Physical properties and system design — Part 1: General requirements,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 1: Exigences générales,2015-12-08,3,['13.220.10'],ISO/TC 21/SC 8,9599,"[37452,35565,50028]",[79444],['en'],100,"<p>ISO 14520-1:2015 specifies requirements and gives recommendations for the design, installation, testing, maintenance and safety of gaseous fire fighting systems in buildings, plants or other structures, and the characteristics of the various extinguishants and types of fire for which they are a suitable extinguishing medium.</p><p

28028,IS,,ISO 14520-10:2000,Gaseous fire-extinguishing systems — Physical properties and system design — Part 10: HFC 23 extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 10: Agent extincteur HFC 23,2000-08-03,1,['13.220.10'],ISO/TC 21/SC 8,9599,,[39792],"['en','fr']",6,

39792,IS,,ISO 14520-10:2005,Gaseous fire-extinguishing systems — Physical properties and system design — Part 10: HFC 23 extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 10: Agent extincteur HFC 23,2005-11-30,2,['13.220.10'],ISO/TC 21/SC 8,9599,[28028],[55346],['en'],7,"<p>ISO 14520-10:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 23 extinguishant.</p>"

55346,IS,,ISO 14520-10:2016,Gaseous fire-extinguishing systems — Physical properties and system design — Part 10: HFC 23 extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 10: Agent extincteur HFC 23,2016-09-28,3,['13.220.10'],ISO/TC 21/SC 8,9599,[39792],[74525],['en'],9,"<p>ISO 14520-10:2016 contains specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 23 extinguishant. It includes details of physical properties, specification, usage and safety aspects and is applicable to systems operating at a nominal pressure of 41 bar without nitrogen superpressurization and 70 bar superpr

28029,IS,,ISO 14520-11:2000,Gaseous fire-extinguishing systems — Physical properties and system design — Part 11: HFC 236fa extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 11: Agent extincteur HFC 236fa,2000-08-03,1,['13.220.10'],ISO/TC 21/SC 8,9599,,[39793],"['en','fr']",5,

39793,IS,,ISO 14520-11:2005,Gaseous fire-extinguishing systems — Physical properties and system design — Part 11: HFC 236fa extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 11: Agent extincteur HFC 236fa,2005-11-30,2,['13.220.10'],ISO/TC 21/SC 8,9599,[28029],[55347],['en'],7,"<p>ISO 14520-11:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 236fa extinguishant.</p>"

28030,IS,,ISO 14520-12:2000,Gaseous fire-extinguishing systems — Physical properties and system design — Part 12: IG-01 extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 12: Agent extincteur IG-01,2000-08-03,1,['13.220.10'],ISO/TC 21/SC 8,9599,,[39794],"['en','fr']",7,

39794,IS,,ISO 14520-12:2005,Gaseous fire-extinguishing systems — Physical properties and system design — Part 12: IG-01 extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 12: Agent extincteur IG-01,2005-11-30,2,['13.220.10'],ISO/TC 21/SC 8,9599,[28030],[55348],['en'],7,"<p>ISO 14520-12:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the IG-01 extinguishant.</p>"

28031,IS,,ISO 14520-13:2000,Gaseous fire-extinguishing systems — Physical properties and system design — Part 13: IG-100 extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 13: Agent extincteur IG-100,2000-08-03,1,['13.220.10'],ISO/TC 21/SC 8,9599,,[39795],"['en','fr']",6,

39795,IS,,ISO 14520-13:2005,Gaseous fire-extinguishing systems — Physical properties and system design — Part 13: IG-100 extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 13: Agent extincteur IG-100,2005-11-30,2,['13.220.10'],ISO/TC 21/SC 8,9599,[28031],[55350],['en'],6,"<p>ISO 14520-13:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the IG-100 extinguishant.</p>"

28032,IS,,ISO 14520-14:2000,Gaseous fire-extinguishing systems — Physical properties and system design — Part 14: IG-55 extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 14: Agent extincteur IG-55,2000-08-03,1,['13.220.10'],ISO/TC 21/SC 8,9599,,[39796],"['en','fr']",7,

39796,IS,,ISO 14520-14:2005,Gaseous fire-extinguishing systems — Physical properties and system design — Part 14: IG-55 extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 14: Agent extincteur IG-55,2005-11-30,2,['13.220.10'],ISO/TC 21/SC 8,9599,[28032],[55349],['en'],7,"<p>ISO 14520-14:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the IG-55 extinguishant.</p>"

28033,IS,,ISO 14520-15:2000,Gaseous fire-extinguishing systems — Physical properties and system design — Part 15: IG-541 extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 15: Agent extincteur IG-541,2000-08-10,1,['13.220.10'],ISO/TC 21/SC 8,9599,,[39797],"['en','fr']",8,

39797,IS,,ISO 14520-15:2005,Gaseous fire-extinguishing systems — Physical properties and system design — Part 15: IG-541 extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 15: Agent extincteur IG-541,2005-11-30,2,['13.220.10'],ISO/TC 21/SC 8,9599,[28033],[55351],['en'],10,"<p>ISO 14520-15:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the IG-541 extinguishant.</p>"

28020,IS,,ISO 14520-2:2000,Gaseous fire-extinguishing systems — Physical properties and system design — Part 2: CF3I extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 2: Agent extincteur CF3I,2000-08-10,1,['13.220.10'],ISO/TC 21/SC 8,9599,,[39788],"['en','fr']",7,

36162,IS,Cor,ISO 14520-2:2000/Cor 1:2001,Gaseous fire-extinguishing systems — Physical properties and system design — Part 2: CF3I extinguishant — Technical Corrigendum 1,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 2: Agent extincteur CF3I — Rectificatif technique 1,2001-10-25,1,['13.220.10'],ISO/TC 21/SC 8,9599,,[39788],"['en','fr']",1,

39788,IS,,ISO 14520-2:2006,Gaseous fire-extinguishing systems — Physical properties and system design — Part 2: CF3I extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 2: Agent extincteur CF3I,2006-02-15,2,['13.220.10'],ISO/TC 21/SC 8,9599,"[28020,36162]",[55341],"['en','ru']",6,"<p>ISO 14520-2:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the CF₃I extinguishant. It includes details of physical properties, specification, usage and safety aspects and is applicable to systems operating at a nominal pressure of 25 bar. This does not preclude the use of other s

39798,IS,,ISO 14520-5:2006,Gaseous fire-extinguishing systems — Physical properties and system design — Part 5: FK-5-1-12 extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 5: Agent extincteur FK-5-1-12,2006-02-13,1,['13.220.10'],ISO/TC 21/SC 8,9599,,[55342],['en'],7,"<p>ISO 14520-5:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to theFK-5-1-12 extinguishant. It includes details of physical properties, specification, usage and safety aspects and is applicable to systems operating at nominal pressures of 25 bar and 42 bar with nitrogen propellant. This does not preclude th

55342,IS,,ISO 14520-5:2016,Gaseous fire-extinguishing systems — Physical properties and system design — Part 5: FK-5-1-12 extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 5: Agent extincteur FK-5-1-12,2016-09-28,2,['13.220.10'],ISO/TC 21/SC 8,9599,[39798],[74522],['en'],9,"<p>ISO 14520-5:2016 contains specific requirements for gaseous fire-extinguishing systems, with respect to FK-5-1-12 extinguishant. It includes details of physical properties, specification, usage and safety aspects.</p><p>ISO 14520-5:2016 covers only systems operating at nominal pressures of 25 bar, 34,5 bar, 42 bar and 50 bar with nitrog

74522,IS,,ISO 14520-5:2019,Gaseous fire-extinguishing systems — Physical properties and system design — Part 5: FK-5-1-12 extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 5: Agent extincteur FK-5-1-12,2019-07-01,3,['13.220.10'],ISO/TC 21/SC 8,9599,[55342],[85067],['en'],11,"<p>This document contains specific requirements for gaseous fire-extinguishing systems, with respect to FK-5-1-12 extinguishant. It includes details of physical properties, specifications, usage and safety aspects.</p><p>This document is applicable only to systems operating at nominal pressures of 25 bar, 34,5 bar, 42 bar and 50 bar with

28024,IS,,ISO 14520-6:2000,Gaseous fire-extinguishing systems — Physical properties and system design — Part 6: HCFC Blend A extinguishant,"Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 6: Agent extincteur HCFC, mélange A",2000-08-10,1,['13.220.10'],ISO/TC 21/SC 8,9599,,[39789],"['en','fr']",8,

39789,IS,,ISO 14520-6:2006,Gaseous fire-extinguishing systems — Physical properties and system design — Part 6: HCFC Blend A extinguishant,"Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 6: Agent extincteur HCFC, mélange A",2006-02-13,2,['13.220.10'],ISO/TC 21/SC 8,9599,[28024],[55343],['en'],7,"<p>ISO 14520-6:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the HCFC Blend A extinguishant. It includes details of physical properties, specification, usage and safety aspects and is applicable to systems operating at nominal pressures of 25 bar and 42 bar with nitrogen propellant. Thi

28026,IS,,ISO 14520-8:2000,Gaseous fire-extinguishing systems — Physical properties and system design — Part 8: HFC 125 extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 8: Agent extincteur HCFC 125,2000-08-10,1,['13.220.10'],ISO/TC 21/SC 8,9599,,[39790],"['en','fr']",5,

39790,IS,,ISO 14520-8:2006,Gaseous fire-extinguishing systems — Physical properties and system design — Part 8: HFC 125 extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 8: Agent extincteur HCFC 125,2006-02-13,2,['13.220.10'],ISO/TC 21/SC 8,9599,[28026],[55344],['en'],7,"<p>ISO 14520-8:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 125 extinguishant. It includes details of physical properties, specification, usage and safety aspects and is applicable to systems operating at nominal pressures of 25 bar and 42 bar, superpressurized with nitrogen. This does not p

55344,IS,,ISO 14520-8:2016,Gaseous fire-extinguishing systems — Physical properties and system design — Part 8: HFC 125 extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 8: Agent extincteur HCFC 125,2016-09-28,3,['13.220.10'],ISO/TC 21/SC 8,9599,[39790],[74523],['en'],8,"<p>ISO 14520-8:2016 contains specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 125 extinguishant. It includes details of physical properties, specification, usage and safety aspects.</p><p>ISO 14520-8:2016 covers systems operating at nominal pressures of 25 bar and 42 bar, superpressurized with nitrogen. Th

28027,IS,,ISO 14520-9:2000,Gaseous fire-extinguishing systems — Physical properties and system design — Part 9: HFC 227ea extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 9: Agent extincteur HFC 227ea,2000-08-03,1,['13.220.10'],ISO/TC 21/SC 8,9599,,[39791],"['en','fr']",8,

39791,IS,,ISO 14520-9:2006,Gaseous fire-extinguishing systems — Physical properties and system design — Part 9: HFC 227ea extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 9: Agent extincteur HFC 227ea,2006-02-15,2,['13.220.10'],ISO/TC 21/SC 8,9599,[28027],[55345],['en'],8,"<p>ISO 14520-9:2005 gives specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 227ea extinguishant. It includes details of physical properties, specification, usage and safety aspects and is applicable to systems operating at nominal pressures of 25 bar and 42 bar superpressurized with nitrogen. This does n

55345,IS,,ISO 14520-9:2016,Gaseous fire-extinguishing systems — Physical properties and system design — Part 9: HFC 227ea extinguishant,Systèmes d'extinction d'incendie utilisant des agents gazeux — Propriétés physiques et conception des systèmes — Partie 9: Agent extincteur HFC 227ea,2016-09-28,3,['13.220.10'],ISO/TC 21/SC 8,9599,[39791],[74524],['en'],9,"<p>ISO 14520-9:2016 contains specific requirements for gaseous fire-extinguishing systems, with respect to the HFC 227ea extinguishant. It includes details of physical properties, specification, usage and safety aspects.</p><p>ISO 14520-9:2016 covers systems operating at nominal pressures of 25 bar, 42 bar and 50 bar with nitrogen propella

24597,IS,,ISO 14523:1999,Photography — Processed photographic materials — Photographic activity test for enclosure materials,Photographie — Matériaux photographiques traités — Essai d'activité photographique pour les matériaux de fermeture,1999-03-11,1,['37.040.20'],ISO/TC 42,9599,,[31940],['en'],13,

24598,IS,,ISO 14524:1999,Photography — Electronic still-picture cameras — Methods for measuring opto-electronic conversion functions (OECFs),Photographie — Appareils de prises de vue électroniques — Méthodes de mesure des fonctions de conversion opto-électroniques,1999-12-16,1,['37.040.10'],ISO/TC 42,9599,,[43527],['en'],21,

33853,IS,,ISO 14531-3:2006,Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 3: Fittings for mechanical jointing (including PE-X/metal transitions),Tubes et raccords en matières plastiques — Systèmes de tubes en polyéthylène réticulé (PE-X) pour le transport de combustibles gazeux — Série métrique — Spécifications — Partie 3: Raccords pour assemblage mécanique (y compris transitions PE-X/métal),2006-03-09,1,"['23.040.45','23.040.20','75.200']",ISO/TC 138/SC 4,9599,,[57053],['en'],19,"<p>ISO 14531-3:2006 specifies the physical properties and mechanical-performance requirements for full-end-loa

23275,IS,,ISO 14532:2001,Natural gas — Vocabulary,Gaz naturel — Vocabulaire,2001-08-09,1,"['75.060','01.040.75']",ISO/TC 193,9599,,"[59706,56507]","['en','fr']",68,

37179,IS,Cor,ISO 14532:2001/Cor 1:2002,Natural gas — Vocabulary — Technical Corrigendum 1,Gaz naturel — Vocabulaire — Rectificatif technique 1,2002-05-30,1,"['75.060','01.040.75']",ISO/TC 193,9599,,"[59706,56507]","['en','fr']",1,

56024,IS,,ISO 14533-1:2012,"Processes, data elements and documents in commerce, industry and administration — Long term signature profiles — Part 1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES)","Processus, éléments d'informations et documents dans le commerce, l'industrie et l'administration — Profils de signature à long terme — Partie 1: Profils de signature à long terme pour les signatures électroniques avancées CMS (CAdES)",2012-09-04,1,['35.240.63'],ISO/TC 154,9599,,[64756],"['en','ru']",16,"<p>ISO 14533-1:2012 specifies the elements, among those defined in CMS Advanced Electronic Signatures (CAdES), that enable verification of a digital signature over a l

64756,IS,,ISO 14533-1:2014,"Processes, data elements and documents in commerce, industry and administration — Long term signature profiles — Part 1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES)","Processus, éléments d'informations et documents dans le commerce, l'industrie et l'administration — Profils de signature à long terme — Partie 1: Profils de signature à long terme pour les signatures électroniques avancées CMS (CAdES)",2014-11-19,2,['35.240.63'],ISO/TC 154,9599,[56024],[81814],"['en','ru']",19,"<p>ISO 14533-1:2014 specifies the elements, among those defined in CMS Advanced Electronic Signatures (CAdES), that enable verification of a digital signature o

56025,IS,,ISO 14533-2:2012,"Processes, data elements and documents in commerce, industry and administration — Long term signature profiles — Part 2: Long term signature profiles for XML Advanced Electronic Signatures (XAdES)","Processus, éléments d'informations et documents dans le commerce, l'industrie et l'administration — Profils de signature à long terme — Partie 2: Profils de signature à long terme pour les signatures électroniques avancées XML (XAdES)",2012-09-04,1,['35.240.63'],ISO/TC 154,9599,,[79129],"['en','ru']",16,"<p>ISO 14533-2:2012 specifies the elements, among those defined in XML Advanced Electronic Signatures (XAdES), that enable verification of a digital signature over a l

67937,IS,,ISO 14533-3:2017,"Processes, data elements and documents in commerce, industry and administration — Long term signature profiles — Part 3: Long term signature profiles for PDF Advanced Electronic Signatures (PAdES)","Processus, éléments d'informations et documents dans le commerce, l'industrie et l'administration — Profils de signature à long terme — Partie 3: Profils de signature à long terme pour les signatures électroniques avancées PDF (PAdES)",2017-10-12,1,['35.240.63'],ISO/TC 154,9599,,[88298],['en'],26,"<p>ISO 14533-3:2017 specifies the elements, among those defined in PDF Advanced Electronic Signatures (PAdES), that enable verification of a digital signature over a long per

24638,IS,,ISO 14534:1997,Ophthalmic optics — Contact lenses and contact lens care products — Fundamental requirements,Optique ophtalmique — Lentilles de contact et produits d'entretien des lentilles de contact — Prescriptions fondamentales,1997-12-11,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[31778],"['en','fr']",12,

30273,IS,Cor,ISO 14534:1997/Cor 1:1998,Ophthalmic optics — Contact lenses and contact lens care products — Fundamental requirements — Technical Corrigendum 1,Optique ophtalmique — Lentilles de contact et produits d'entretien des lentilles de contact — Prescriptions fondamentales — Rectificatif technique 1,1998-04-02,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[31778],['fr'],,

31778,IS,,ISO 14534:2002,Ophthalmic optics — Contact lenses and contact lens care products — Fundamental requirements,Optique ophtalmique — Lentilles de contact et produits d'entretien des lentilles de contact — Exigences fondamentales,2002-06-20,2,['11.040.70'],ISO/TC 172/SC 7,9599,"[30273,24638]",[51051],"['en','fr']",11,"<p>This International Standard specifies safety and performance requirements for contact lenses, contact lens care products and other accessories for contact lenses.</p><p>This International Standard does not specify electrical safety and electromagnetic compatibility considerations that might arise from the use of electrical equipment in conjunction with contact lenses a

54891,IS,,ISO 14544:2013,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature — Determination of compression properties",Céramiques techniques — Propriétés mécaniques des céramiques composites à haute température — Détermination des caractéristiques en compression,2013-06-19,1,['81.060.30'],ISO/TC 206,9599,,[84315],"['en','fr']",18,"<p>ISO 14544:2013 specifies the conditions for determination of compression properties of ceramic matrix composite materials with continuous fibre reinforcement for temperatures up to 2 000 °C.</p><p>ISO 14544:2013 applies to all ceramic matrix composites with a continuous fibre reinforc

24725,IS,,ISO 14548:1998,Photography — Dimensions of glass plates,Photographie — Dimensions des plaques de verre,1998-11-05,1,['37.040.20'],ISO/TC 42,9599,,[79170],['en'],4,"<p>This International Standard specifies the nominal sizes of photographic glass plates, together with cutting dimensions and their tolerances. It also specifies the nominal substrate thicknesses and their tolerances.</p>"

24762,IS,,ISO 14554-1:2000,Quality requirements for welding — Resistance welding of metallic materials — Part 1: Comprehensive quality requirements,Exigences de qualité en soudage — Soudage par résistance des matériaux métalliques — Partie 1: Exigences de qualité complète,2000-03-23,1,['25.160.01'],ISO/TC 44/SC 6,9599,,[61409],"['en','fr']",11,

29226,IS,,ISO 14554-2:2000,Quality requirements for welding — Resistance welding of metallic materials — Part 2: Elementary quality requirements,Exigences de qualité en soudage — Soudage par résistance des matériaux métalliques — Partie 2: Exigences de qualité élémentaire,2000-03-23,1,['25.160.01'],ISO/TC 44/SC 6,9599,,[61410],"['en','fr']",6,

24763,IS,,ISO 14555:1998,Welding — Arc stud welding of metallic materials,Soudage — Soudage à l'arc des goujons sur les matériaux métalliques,1998-10-22,1,['25.160.10'],ISO/TC 44/SC 10,9599,,[38136],"['en','fr']",63,

38136,IS,,ISO 14555:2006,Welding — Arc stud welding of metallic materials,Soudage — Soudage à l'arc des goujons sur les matériaux métalliques,2006-09-27,2,['25.160.10'],ISO/TC 44/SC 10,9599,[24763],[57923],"['en','fr']",62,"<p>ISO 14555:2006 covers arc stud welding of metallic materials subject to static and dynamic loading. It specifies requirements that are particular to stud welding, in relation to welding knowledge, quality requirements, welding procedure specification, welding procedure qualification, qualification testing of operators and testing of production welds.</p><p>ISO 14555:2006 is appropriate where it is necessary to demonstrate the capability of a manufacturer to produce wel

57923,IS,,ISO 14555:2014,Welding — Arc stud welding of metallic materials,Soudage — Soudage à l'arc des goujons sur les matériaux métalliques,2014-04-29,3,['25.160.10'],ISO/TC 44/SC 10,9599,[38136],[70565],"['en','fr']",69,"<p>ISO 14555:2014 covers arc stud welding of metallic materials subject to static and fatigue loading. It specifies requirements that are particular to stud welding, in relation to welding knowledge, quality requirements, welding procedure specification, welding procedure qualification, qualification testing of operators and testing of production welds.</p><p>ISO 14555:2014 is appropriate where it is necessary to demonstrate the capability of a manufacturer to produce wel

70565,IS,,ISO 14555:2017,Welding — Arc stud welding of metallic materials,Soudage — Soudage à l'arc des goujons sur les matériaux métalliques,2017-05-16,4,['25.160.10'],ISO/TC 44/SC 10,9599,[57923],[86025],"['en','fr']",65,"<p>ISO 14555:2017 covers arc stud welding of metallic materials subject to static and fatigue loading. It specifies requirements that are particular to stud welding, in relation to welding knowledge, quality requirements, welding procedure specification, welding procedure qualification, qualification testing of operators and testing of production welds.</p><p>ISO 14555:2017 is appropriate where it is necessary to demonstrate the capability of a manufacturer to produce wel

23982,IS,,ISO 14556:2000,Steel — Charpy V-notch pendulum impact test — Instrumented test method,Aciers — Essai de flexion par choc sur éprouvette Charpy à entaille en V — Méthode d'essai instrumenté,2000-05-04,1,['77.040.10'],ISO/TC 164/SC 4,9599,,[63814],"['en','fr']",14,

39180,IS,Amd,ISO 14556:2000/Amd 1:2006,Steel — Charpy V-notch pendulum impact test — Instrumented test method — Amendment 1: Annex D — Instrumented Charpy V-notch pendulum impact test of sub-size test pieces,Aciers — Essai de flexion par choc sur éprouvette Charpy à entaille en V — Méthode d'essai instrumenté — Amendement 1: Annexe D — Essai de flexion par choc instrumenté sur éprouvettes Charpy à entaille en V de dimensions réduites,2006-06-26,1,['77.040.10'],ISO/TC 164/SC 4,9599,,[63814],"['en','fr']",9,

63814,IS,,ISO 14556:2015,Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method,Matériaux métalliques — Essai de flexion par choc sur éprouvette Charpy à entaille en V — Méthode d'essai instrumenté,2015-09-11,2,['77.040.10'],ISO/TC 164/SC 4,9599,"[23982,39180]",[82164],"['en','fr']",20,"<p>ISO 14556:2015 specifies a method of instrumented Charpy V-notch pendulum impact testing on metallic materials and the requirements concerning the measurement and recording equipment.</p><p>With respect to the Charpy pendulum impact test described in ISO 148‑1, this test provides further information on the fracture behaviour of the product under impact testing conditions.</p><p

37067,IS,,ISO 14557:2002,Fire-fighting hoses — Rubber and plastics suction hoses and hose assemblies,Tuyaux de lutte contre l'incendie — Tuyaux d'aspiration et flexibles en caoutchouc et en plastique,2002-11-27,1,"['83.140.40','13.220.10']",ISO/TC 45/SC 1,9599,,[77511],"['en','fr']",18,

43817,IS,Amd,ISO 14557:2002/Amd 1:2007,Fire-fighting hoses — Rubber and plastics suction hoses and hose assemblies — Amendment 1,Tuyaux de lutte contre l'incendie — Tuyaux d'aspiration et flexibles en caoutchouc et en plastique — Amendement 1,2007-10-16,1,"['83.140.40','13.220.10']",ISO/TC 45/SC 1,9599,,[77511],"['en','fr']",4,

24768,IS,,ISO 14558:2000,Rubber — Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy,Caoutchouc — Détermination de la non-saturation résiduelle du caoutchouc nitrile hydrogéné (HNBR) par spectroscopie à infrarouge,2000-08-24,1,['83.060'],ISO/TC 45/SC 3,9599,,[70306],['en'],7,