Withdrawn and superseded ISO standards — page 42 of 246

32161,IS,,ISO 14243-3:2004,Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test,Implants chirurgicaux — Usure des prothèses totales de l'articulation du genou — Partie 3: Paramètres de charge et de déplacement pour machines d'essai d'usure avec contrôle de déplacement et conditions environnementales correspondantes d'essai,2004-09-17,1,['11.040.40'],ISO/TC 150/SC 4,9599,,[56649],"['en','fr']",15,"<p>ISO 14243-3:2004 specifies relative movement between articulating components, the pattern of the applied force, speed and duration of testing

43824,IS,Cor,ISO 14243-3:2004/Cor 1:2006,Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test — Technical Corrigendum 1,Implants chirurgicaux — Usure des prothèses totales de l'articulation du genou — Partie 3: Paramètres de charge et de déplacement pour machines d'essai d'usure avec contrôle de déplacement et conditions environnementales correspondantes d'essai — Rectificatif technique 1,2006-02-06,1,['11.040.40'],ISO/TC 150/SC 4,9599,,[56649],['en'],1,

38603,IS,,ISO 14245:2006,Gas cylinders — Specifications and testing of LPG cylinder valves — Self-closing,Bouteilles à gaz — Spécifications et essais pour valves de bouteilles de GPL — Fermeture automatique,2006-02-17,1,['23.020.35'],ISO/TC 58/SC 2,9599,,[68493],"['en','fr']",19,"<p>ISO 14245:2005 specifies the requirements for design, specification and type testing for dedicated LPG self-closing cylinder valves specifically for use with transportable refillable LPG cylinders from 0,5 l up to 150 l water capacity. It includes references to associated equipment for vapour or liquid service.</p>"

68493,IS,,ISO 14245:2019,Gas cylinders — Specifications and testing of LPG cylinder valves — Self-closing,Bouteilles à gaz — Spécifications et essais pour valves de bouteilles de GPL — Fermeture automatique,2019-06-03,2,['23.020.35'],ISO/TC 58/SC 2,9599,[38603],[81928],"['en','fr']",23,"<p>This document specifies the requirements for design, specification, type testing and production testing and inspection for dedicated LPG self-closing cylinder valves for use with and directly connected to transportable refillable LPG cylinders.</p><p>It also includes requirements for associated equipment for vapour and liquid service. Bursting discs and/or fusible plugs are not covered in this document.</p

23971,IS,,ISO 14246:2001,Transportable gas cylinders — Gas cylinder valves — Manufacturing tests and inspections,Bouteilles à gaz transportables — Robinets de bouteilles à gaz — Essais de fabrication et contrôles,2001-04-12,1,['23.020.35'],ISO/TC 58/SC 2,9599,,[53945],"['en','fr']",6,

53945,IS,,ISO 14246:2014,Gas cylinders — Cylinder valves — Manufacturing tests and examinations,Bouteilles à gaz — Robinets de bouteilles à gaz — Essais de fabrication et contrôles,2014-06-06,2,['23.020.35'],ISO/TC 58/SC 2,9599,[23971],[81669],"['en','fr']",6,"<p>ISO 14246:2014 specifies the procedures and acceptance criteria for manufacturing testing and examination of cylinder valves that have been manufactured to achieve type approval.</p><p>ISO 14246:2014 is applicable to cylinder valves intended to be fitted to refillable transportable gas cylinders, main valves (excluding ball valves) for cylinder bundles and cylinder valves or main valves with integrated pressure regulator (VIPR) desi

69854,IS,Amd,ISO 14246:2014/Amd 1:2017,Gas cylinders — Cylinder valves — Manufacturing tests and examinations — Amendment 1,Bouteilles à gaz — Robinets de bouteilles à gaz — Essais de fabrication et contrôles — Amendement 1,2017-07-11,2,['23.020.35'],ISO/TC 58/SC 2,9599,,[81669],"['en','fr']",1,

23021,IS,,ISO 14253-1:1998,Geometrical Product Specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for proving conformance or non-conformance with specifications,Spécification géométrique des produits (GPS) — Vérification par la mesure des pièces et des équipements de mesure — Partie 1: Règles de décision pour prouver la conformité ou la non-conformité à la spécification,1998-11-12,1,['17.040.40'],ISO/TC 213,9599,,[63638],"['en','fr']",14,

63638,IS,,ISO 14253-1:2013,Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for proving conformity or nonconformity with specifications,Spécification géométrique des produits (GPS) — Vérification par la mesure des pièces et des équipements de mesure — Partie 1: Règles de décision pour prouver la conformité ou la non-conformité à la spécification,2013-08-22,2,['17.040.40'],ISO/TC 213,9599,"[23021,57555]",[70137],"['en','fr']",15,"<p>ISO 14253-1:2013 establishes the rules for determining the conformity or nonconformity with a given tolerance for a characteristic of a workpiece (or a population of workpieces) or

22919,IS,,ISO 14254:2001,Soil quality — Determination of exchangeable acidity in barium chloride extracts,Qualité du sol — Détermination de l'acidité échangeable dans un extrait au chlorure de baryum,2001-09-06,1,['13.080.10'],ISO/TC 190/SC 3,9599,,[60567],"['en','fr']",5,

24037,IS,,ISO 14268:2002,Leather — Physical and mechanical tests — Determination of water vapour permeability,Cuir — Essais physiques et mécaniques — Détermination de la perméabilité à la vapeur d'eau,2002-12-05,1,['59.140.30'],IULTCS,9599,,[54450],"['en','fr']",6,"<p>ISO 14268:2002 describes a method for determining the water vapour permeability of leather and provides alternative methods of sample preparation. It is applicable to all leathers below 3,0 mm thickness.</p>"

54450,IS,,ISO 14268:2012,Leather — Physical and mechanical tests — Determination of water vapour permeability,Cuir — Essais physiques et mécaniques — Détermination de la perméabilité à la vapeur d'eau,2012-10-26,2,['59.140.30'],IULTCS,9599,[24037],[81968],"['en','fr']",7,<p>ISO 14268:2012 describes a method for determining the water vapour permeability of leather and provides alternative methods of sample preparation.</p>

24040,IS,,ISO 14270:2000,"Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds","Dimensions des éprouvettes et mode opératoire pour l'essai par déboutonnage mécanisé des soudures par résistance par points, à la molette et par bossages",2000-11-09,1,['25.160.40'],IIW,9599,,[61462],"['en','fr']",9,

24041,IS,,ISO 14271:2000,"Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness)","Essai de dureté Vickers sur soudures par résistance par points, par bossages et à la molette (essai sous charge réduite et essai de microdureté)",2000-11-09,1,['25.160.40'],IIW,9599,,[53741],"['en','fr']",6,

53741,IS,,ISO 14271:2011,"Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds","Soudage par résistance — Essais de dureté Vickers (force réduite et microdureté) sur soudures par résistance par points, par bossages et à la molette",2011-08-26,2,['25.160.40'],IIW,9599,[24041],[72149],"['en','fr','ru']",7,"<p> ISO 14271:2011 specifies the procedures for the hardness testing of etched cross-sections of resistance spot, projection, and seam welds.</p><p>The aim of the hardness tests is to determine the Vickers hardness, in the low-force or microhardness range, of the weld nugget, the heat affected zone, and parent material in

61785,IS,Cor,ISO 14271:2011/Cor 1:2012,"Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds — Technical Corrigendum 1","Soudage par résistance — Essais de dureté Vickers (force réduite et microdureté) sur soudures par résistance par points, par bossages et à la molette — Rectificatif technique 1",2012-04-19,2,['25.160.40'],IIW,9599,,[72149],"['en','ru']",2,

24042,IS,,ISO 14272:2000,Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds,Dimensions des éprouvettes et mode opératoire pour l'essai de traction sur éprouvettes en croix des soudures par résistance par points et par bossages,2000-11-09,1,['25.160.40'],IIW,9599,,[61272],"['en','fr']",8,

24043,IS,,ISO 14273:2000,"Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds","Dimensions des éprouvettes et mode opératoire pour l'essai de cisaillement des soudures par résistance par points, à la molette et par bossages",2000-11-09,1,['25.160.40'],IIW,9599,,[61273],"['en','fr']",8,

24063,IS,,ISO 14284:1996,Steel and iron — Sampling and preparation of samples for the determination of chemical composition,Fontes et aciers — Prélèvement et préparation des échantillons pour la détermination de la composition chimique,1996-06-27,1,['77.080.01'],ISO/TC 17/SC 1,9599,[4357],[77332],"['en','fr']",30,"<p>Gives methods for the determination of the chemical composition of pig iron, cast iron and steel. Methods are specified for use with both liquid and solid metal. Replaces ISO 377-2:1989.</p>"

54558,IS,,ISO 14287:2012,Plain bearings — Pad materials for tilting pad bearings,Paliers lisses — Matériaux des patins pour paliers à patins oscillants,2012-01-26,1,['21.100.10'],ISO/TC 123/SC 7,9599,,[75121],['en'],6,"<p>ISO 14287:2012 specifies requirements for materials based on metals, polymers, back metals and pivots for the manufacture of tilting pad bearings. </p>"

75121,IS,,ISO 14287:2018,Plain bearings — Pad materials for tilting pad bearings,Paliers lisses — Matériaux des patins pour paliers à patins oscillants,2018-10-22,2,['21.100.10'],ISO/TC 123/SC 7,9599,[54558],[77119],['en'],6,"<p>This document specifies requirements for tilting pad bearing lining materials (metals and polymers), backing metals and pivots.</p>"

54564,IS,,ISO 14289-1:2012,Document management applications — Electronic document file format enhancement for accessibility — Part 1: Use of ISO 32000-1 (PDF/UA-1),Applications de la gestion de documents — Amélioration de format du fichier du document électronique pour l'accessibilité — Partie 1: Utilisation de l'ISO 32000-1 (PDF/UA-1),2012-07-06,1,"['35.240.30','37.100.99']",ISO/TC 171/SC 2,9599,,[64599],"['en','ru']",16,"<div id='MathJax_Message' style='display: none;'></div><!-- saved from url=(0128)file://C:\\Users\\breteau\\AppData\\Local\\Microsoft\\Windows\\Temporary Internet Files\\Content.Outlook\\9RJZ2K1H\\C054564e Abstract.html --><p></p><p>ISO 14289-1:2012 specifies how to use IS

54594,IS,,ISO 14298:2013,Graphic technology — Management of security printing processes,Technologie graphique — Management des procédés d'impression de sécurité,2013-04-09,1,['37.100.01'],ISO/TC 130,9599,,[80070],"['en','fr']",20,<p>ISO 14298:2013 specifies requirements for a security printing management system for security printers.</p><p>ISO 14298:2013 specifies a minimum set of security printing management system requirements. Organizations ensure that customer security requirements are met as appropriate provided these do not conflict with the requirements of ISO 14298:2013.</p>

24171,IS,,ISO 14300-1:2001,Space systems — Programme management — Part 1: Structuring of a programme,Systèmes spatiaux — Management de programme — Partie 1: Structuration d'un programme,2001-05-17,1,['49.140'],ISO/TC 20/SC 14,9599,,[45342],"['en','fr']",31,

45342,IS,,ISO 14300-1:2011,Space systems — Programme management — Part 1: Structuring of a project,Systèmes spatiaux — Management de programme — Partie 1: Structuration d'un projet,2011-07-08,2,['49.140'],ISO/TC 20/SC 14,9599,[24171],[86543],['en'],35,"<p>ISO 14300-1:2011 addresses the space programme/project management requirements, applicable through a top-down approach in a contractual relationship between customers and suppliers.</p><p>The applicable requirements for product assurance are given in ISO 14300-2. Annex A of ISO 14300-1:2011 gives the general ISO standards framework for space systems programme management.</p><p>ISO 14300-1:2011 is intended to be used as a basis when establis

30154,IS,,ISO 14300-2:2002,Space systems — Programme management — Part 2: Product assurance,Systèmes spatiaux — Management de programmes — Partie 2: Assurance produit,2002-07-11,1,['49.140'],ISO/TC 20/SC 14,9599,,[57534],"['en','fr']",8,

57534,IS,,ISO 14300-2:2011,Space systems — Programme management — Part 2: Product assurance,Systèmes spatiaux — Management de programme — Partie 2: Assurance produit,2011-09-12,2,['49.140'],ISO/TC 20/SC 14,9599,[30154],[86544],['en'],9,"<p>ISO 14300-2:2011 defines the product assurance (PA) policy, objectives, principles, and requirements for the establishment and implementation of PA programmes for space programmes covering mission definition, design, development, production and operations of space products, including disposal.</p><p>The PA discipline covers: PA management, quality assurance, safety assurance, dependability (reliability, availability and maintainability) assurance of softwa

24176,IS,,ISO 14302:2002,Space systems — Electromagnetic compatibility requirements,Systèmes spatiaux — Exigences relatives à la compatibilité électromagnétique,2002-12-13,1,"['33.100.01','49.140']",ISO/TC 20/SC 14,9599,,[77484],"['en','fr']",49,"<p>ISO 14302:2002 establishes performance requirements for the purpose of ensuring space systems electromagnetic compatibility (EMC). The engineering issues to be addressed in order to achieve system-level EMC are identified herein, with guidance and rationale towards achieving specification conformance. The method for the derivation of typical equipment-level requirements from a space-system-level requirement is illustrated.</p>"

60572,IS,,ISO 14306:2012,Industrial automation systems and integration — JT file format specification for 3D visualization,Systèmes d'automatisation industrielle et intégration — Spécification de format de fichier JT pour visualisation 3D,2012-12-14,1,['25.040.40'],ISO/TC 184/SC 4,9599,[54606],[62770],['en'],559,<p>ISO 14306:2012 provides the description of the structure and content for a binary file having the extension of .jt. A binary file with the .jt extension is generally referred to as a JT file. The JT format described in ISO 14306:2012 is used primarily in industrial use cases as the means for capturing and repurposing lightweight 3D product definition data.</p>

62770,IS,,ISO 14306:2017,Industrial automation systems and integration — JT file format specification for 3D visualization,Systèmes d'automatisation industrielle et intégration — Spécification de format de fichier JT pour visualisation 3D,2017-12-08,2,['25.040.40'],ISO/TC 184/SC 4,9599,[60572],"[89233,86064,86063,87427]",['en'],649,"<p>ISO 14306:2017 defines the syntax and semantics of a file format for the 3D visualization and interrogation of lightweight geometry and product manufacturing information derived from CAD systems, using visualization software tools that do not need the full capability of a CAD system.</p><p>ISO 14306:2017 has been adopted as a 3D visualization capability in ad

54607,IS,,ISO 14309:2011,"Rubber, vulcanized or thermoplastic — Determination of volume and/or surface resistivity",Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistivité transversale et/ou superficielle,2011-09-12,1,['83.060'],ISO/TC 45/SC 2,9599,,[72786],"['en','ru']",14,<p>ISO 14309:2011 specifies a method for the determination of the volume and the surface resistivity of vulcanized or thermoplastic rubbers. The method can be applied to materials with a resistivity from 10¹ ohm metres to 10¹⁷ ohm metres.</p>

6014,IS,,ISO 1431-1:1980,Rubber vulcanized — Resistance to ozone cracking — Part 1: Static strain test,Caoutchouc vulcanisé — Résistance au craquelage par l'ozone — Partie 1: Essai sous allongement statique,1980-09-01,2,['83.060'],ISO/TC 45,9599,,[6015],"['en','fr']",6,

6016,IS,Amd,ISO 1431-1:1980/Amd 1:1982,Rubber vulcanized — Resistance to ozone cracking — Part 1: Static strain test — Amendment 1,Caoutchouc vulcanisé — Résistance au craquelage par l'ozone — Partie 1: Essai sous allongement statique — Amendement 1,1982-06-01,2,['83.060'],ISO/TC 45/SC 2,9599,,[6015],['en'],1,

6015,IS,,ISO 1431-1:1989,"Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static strain test",Caoutchouc vulcanisé ou thermoplastique — Résistance au craquelage par l'ozone — Partie 1: Essai sous allongement statique,1989-06-08,3,['83.060'],ISO/TC 45/SC 2,9599,"[6016,6013,6014]",[37030],"['en','fr']",7,<p>Refers to tests with a definite temperature under static tensile strain with air containing a definite concentration of ozone in circumstances that exclude the effects of direct light. Great caution is necessary in attempting to relate the test results to service performance. Explanatory notes on the nature of ozone cracking are given in Annex A. Part 2 refers t

37030,IS,,ISO 1431-1:2004,"Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing",Caoutchouc vulcanisé ou thermoplastique — Résistance au craquelage par l'ozone — Partie 1: Essais sous allongement statique et dynamique,2004-09-08,4,['83.060'],ISO/TC 45/SC 2,9599,"[6015,6018]",[55604],"['en','fr']",14,"<p>ISO 1431-1:2004 specifies procedures intended for use in estimating the resistance of vulcanized or thermoplastic rubbers to cracking when exposed, under static or dynamic tensile strain, to air containing a definite concentration of ozone and at a definite temperature in circumstances that exclude the effects of direct light.</p>" 370

46585,IS,Amd,ISO 1431-1:2004/Amd 1:2009,"Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing — Amendment 1",Caoutchouc vulcanisé ou thermoplastique — Résistance au craquelage par l'ozone — Partie 1: Essais sous allongement statique et dynamique — Amendement 1,2009-03-09,4,['83.060'],ISO/TC 45/SC 2,9599,,[55604],"['en','fr']",1,

55604,IS,,ISO 1431-1:2012,"Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing",Caoutchouc vulcanisé ou thermoplastique — Résistance au craquelage par l'ozone — Partie 1: Essais sous allongement statique et dynamique,2012-08-17,5,['83.060'],ISO/TC 45/SC 2,9599,"[37030,46585]",[80466],"['en','fr']",17,"<p>ISO 1431-1:2012 specifies procedures intended for use in estimating the resistance of vulcanized or thermoplastic rubbers to cracking when exposed, under static or dynamic tensile strain, to air containing a definite concentration of ozone and at a definite temperature in circumstances that exclude the effects of direct light.</p>" 5

80466,IS,,ISO 1431-1:2022,"Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing",Caoutchouc vulcanisé ou thermoplastique — Résistance au craquelage par l'ozone — Partie 1: Essais sous allongement statique et dynamique,2022-06-23,6,['83.060'],ISO/TC 45/SC 2,9599,[55604],[86601],"['en','fr']",22,"<p>This document specifies the procedures intended for use in estimating the resistance of vulcanized or thermoplastic rubbers to cracking when exposed, under static or dynamic tensile strain, to air containing a definite concentration of ozone, at a definite temperature and, if required, at a definite relative humidity in circumstances that ex

6013,IS,,ISO 1431:1972,Withdrawal of ISO 1431-1972,Annulation de l'ISO 1431-1972,1972-09-01,1,['83.060'],ISO/TC 45/SC 2,9599,,[6015],"['en','fr']",4,

6017,IS,,ISO 1431-2:1982,"Rubber, vulcanized — Resistance to ozone cracking — Part 2: Dynamic strain test",Caoutchouc vulcanisé — Résistance au craquelage par l'ozone — Partie 2: Essai de déformation dynamique,1982-08-01,1,['83.060'],ISO/TC 45/SC 2,9599,,[6018],"['en','fr']",6,

6018,IS,,ISO 1431-2:1994,"Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 2: Dynamic strain test",Caoutchouc vulcanisé ou thermoplastique — Résistance au craquelage par l'ozone — Partie 2: Essai de déformation dynamique,1994-01-20,2,['83.060'],ISO/TC 45/SC 2,9599,[6017],[37030],"['en','fr']",8,"<p>Specifies a method intended for use in estimating the resistance of vulcanized or thermoplastic rubbers to cracking when exposed, under dynamic tensile strain, to air containing a definite concentration of ozone and at a definite temperature in circumstances that exclude the effects of direct light. Great caution is necessary in attempting to relate standard test results t

6019,IS,,ISO 1431-3:2000,"Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers",Caoutchouc vulcanisé ou thermoplastique — Résistance au craquelage par l'ozone — Partie 3: Méthode de référence et autres méthodes pour la détermination de la concentration d'ozone dans les enceintes d'essai de laboratoire,2000-04-13,1,['83.060'],ISO/TC 45/SC 2,9599,,[70223],"['en','fr']",21,

24203,IS,,ISO 14310:2001,Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs,Industries du pétrole et du gaz naturel — Équipement de fond de trou — Garnitures d'étanchéité (packers) et bouchons mécaniques d'isolation de fond,2001-12-13,1,['75.180.10'],ISO/TC 67/SC 4,9599,,[44481],['en'],23,"<p>La présente Norme internationale fournit les exigences pour les garnitures d'étanchéité et les bouchons de support pour utilisation dans les industries du pétrole et du gaz naturel. L'application de la présente Norme internationale est limitée aux seuls produits conformes à la définition de garniture d'étanchéité ou de bouchon de support utilisés par les industries du

24206,IS,,ISO 14313:1999,Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves,Industries du pétrole et du gaz naturel — Systèmes de transport par conduites — Robinets de conduites,1999-10-21,1,['75.200'],ISO/TC 67/SC 2,9599,,[41110],['en'],60,

41110,IS,,ISO 14313:2007,Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves,Industries du pétrole et du gaz naturel — Systèmes de transport par conduites — Robinets de conduites,2007-12-04,2,['75.200'],ISO/TC 67/SC 2,9599,[24206],[86822],['en'],77,"<p>ISO 14313:2007 specifies requirements and provides recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems meeting the requirements of ISO 13623 for the petroleum and natural gas industries.</p><p>ISO 14313:2007 is not applicable to subsea pipeline valves, as they are covered by a separate International Standard (ISO 1

53508,IS,Cor,ISO 14313:2007/Cor 1:2009,Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves — Technical Corrigendum 1,Industries du pétrole et du gaz naturel — Systèmes de transport par conduites — Robinets de conduites — Rectificatif technique 1,2009-01-12,2,['75.200'],ISO/TC 67/SC 2,9599,,[86822],['en'],2,

39960,IS,,ISO 14317:2006,Sintered metal materials excluding hardmetals — Determination of compressive yield strength,"Matériaux métalliques frittés, à l'exclusion des métaux-durs — Détermination de la limite d'élasticité en compression",2006-10-13,1,"['77.160','77.040.10']",ISO/TC 119/SC 3,9599,,"[61264,57413]",['en'],4,"<p>ISO 14317:2006 specifies a method for the determination of the compressive yield strength of sintered metal materials, excluding hardmetals.</p><p>This method is applicable to sintered materials, excluding hardmetals, that may or may not have been subjected to heat treatment after sintering, and also to materials that have been sized or coined after sintering.</p>" 39961,

6020,IS,,ISO 1432:1982,"Rubber, vulcanized — Low temperature stiffening (Gehman test) — Determination",Caoutchouc vulcanisé — Rigidité à basse température (essai Gehman) — Détermination,1982-12-01,2,['83.060'],ISO/TC 45/SC 2,9599,,[6021],"['en','fr']",6,

6021,IS,,ISO 1432:1988,"Rubber, vulcanized or thermoplastic — Determination of low temperature stiffening (Gehman test)",Caoutchouc vulcanisé ou thermoplastique — Détermination de la rigidité à basse température (Essai Gehman),1988-12-29,3,['83.060'],ISO/TC 45/SC 2,9599,[6020],[55608],"['en','fr']",6,<p>Specifies a static procedure for the materials mentioned over a temperature range from room temperature to approximately -150 °C. Minor revision of the second ecition (ISO 1432:1982).</p>

38908,IS,Cor,ISO 1432:1988/Cor 1:2003,"Rubber, vulcanized or thermoplastic — Determination of low temperature stiffening (Gehman test) — Technical Corrigendum 1",Caoutchouc vulcanisé ou thermoplastique — Détermination de la rigidité à basse température (Essai Gehman) — Rectificatif technique 1,2003-08-19,3,['83.060'],ISO/TC 45/SC 2,9599,,[55608],"['en','fr']",1,

55608,IS,,ISO 1432:2013,"Rubber, vulcanized or thermoplastic — Determination of low-temperature stiffening (Gehman test)",Caoutchouc vulcanisé ou thermoplastique — Détermination de la rigidité à basse température (Essai Gehman),2013-01-03,4,['83.060'],ISO/TC 45/SC 2,9599,"[38908,6021]",[77422],"['en','fr']",12,"<p>ISO 1432:2013 specifies a static procedure, known as the Gehman test, for determining the relative stiffness characteristics of vulcanized or thermoplastic rubbers over a temperature range from room temperature to approximately −150 °C.</p>"

54611,IS,,ISO 14322:2012,Plastics — Epoxy resins — Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry,Plastiques — Résines époxydes — Détermination du degré de réticulation des résines époxydes réticulées par analyse calorimétrique différentielle,2012-06-18,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[74606],['en'],7,

24087,IS,,ISO 14323:2006,Resistance spot welding and projection welds — Destructive testing of welds — Specimen dimensions and procedure for impact shear test and cross-tension testing,Soudage par résistance par points et par bossages — Essais destructifs des soudures — Dimensions des éprouvettes et procédure d'essai de cisaillement par choc et d'essai de traction par choc sur éprouvettes en croix,2006-04-26,1,['25.160.40'],IIW,9599,,[61277],"['en','fr']",18,"<p>ISO 14323:2006 covers destructive testing of welds.</p><p>ISO 14323:2006 specifies specimen dimensions and testing procedures for impact shear and cross-tension testing of spot and embossed projection welds in overlapping sheets, in

30619,IS,,ISO 14327:2004,"Resistance welding — Procedures for determining the weldability lobe for resistance spot, projection and seam welding","Soudage par résistance — Modes opératoires pour la détermination du domaine de soudabilité pour le soudage par résistance par points, par bossages et à la molette",2004-03-22,1,['25.160.10'],ISO/TC 44/SC 6,9599,,"[24091,82254,51135]","['en','fr']",13,"<p>ISO 14327:2004 specifies procedures for determining the weldability lobe for producing quality welds. The tests are used in particular to determine the weldability lobe for coated/uncoated steels, stainless steels and aluminium and its alloys but may also be used for other metallic materials.</p><p

24093,IS,,ISO 14329:2003,"Resistance welding — Destructive tests of welds — Failure types and geometric measurements for resistance spot, seam and projection welds","Soudage par résistance — Essais destructifs des soudures — Types de rupture et dimensions géométriques pour les assemblages soudés par résistance par points, à la molette et par bossages",2003-07-07,1,['25.160.40'],ISO/TC 44/SC 6,9599,,"[61274,62618]","['en','fr']",11,"<p>ISO 14329:2003 specifies the definitions of the geometric measurements and fracture types to be used in relation to the testing of resistance spot, projection and seam welds in which different loading configurations cause different stress distributions in the w

6022,IS,,ISO 1433:1984,"Rubber, vulcanized — Preferred gradations of properties",Caoutchouc vulcanisé — Gradations préférées des propriétés,1984-05-01,1,['83.060'],ISO/TC 45,9599,,[6023],"['en','fr']",5,

6024,IS,,ISO 1434:1975,Natural rubber in bales — Amount of bale coating — Specification and determination,Caoutchouc naturel en balles — Quantité d'enduit — Spécifications et détermination,1975-02-01,1,['83.060'],ISO/TC 45/SC 3,9599,,[6025],"['en','fr']",2,

6025,IS,,ISO 1434:1995,Natural rubber in bales — Amount of bale coating — Determination,Caoutchouc naturel en balles — Quantité d'enduit — Détermination,1995-11-09,2,['83.060'],ISO/TC 45/SC 3,9599,[6024],"[60897,57376]","['en','fr']",3,<p>Describes an ashing procedure for the determination of the amount of bale coating present on the outside wrapper sheets of bales of natural rubber. Contains also a brushing and scraping procedure for the determination of the amount of bale coating on the outside wrapper sheets of all grades of smoked sheet rubbers. Replaces the first edition which has been technically revised.</p>

35670,IS,,ISO 14341:2002,Welding consumables — Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels — Classification,Produits consommables pour le soudage — Fils-électrodes et dépôts pour le soudage à l'arc sous protection gazeuse des aciers non alliés et à grains fins — Classification,2002-11-05,1,['25.160.20'],ISO/TC 44/SC 3,9599,,[50227],"['en','fr']",11,"<p>ISO 14341:2002 specifies requirements for classification of wire electrodes in the as-welded condition and in the post weld heat-treated condition for gas shielded metal arc welding of non alloy and fine grain steels with a minimum yield strength of up to 500 N/mm² or a minimum

50227,IS,,ISO 14341:2010,Welding consumables — Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels — Classification,Produits consommables pour le soudage — Fils-électrodes et métaux d'apport déposés en soudage à l'arc sous protection gazeuse des aciers non alliés et à grains fins — Classification,2010-02-15,2,['25.160.20'],ISO/TC 44/SC 3,9599,[35670],[79321],"['en','fr']",12,"<p>ISO 14341:2010 specifies requirements for classification of wire electrodes and weld deposits in the as-welded condition and in the post-weld heat-treated condition for gas shielded metal arc welding of non alloy and fine grain steels with a minimum yield strength o

24110,IS,,ISO 14343:2002,"Welding consumables — Wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and heat resisting steels — Classification","Produits consommables pour le soudage — Fils-électrodes, fils d'apport et baguettes d'apport pour le soudage à l'arc des aciers inoxydables et des aciers résistant aux températures élevées — Classification",2002-02-28,1,['25.160.20'],IIW,9599,,[51588],"['en','fr']",9,"<p>ISO 14343:2002 specifies requirements for classification of wire electrodes, wires and rods for gas-shielded metal arc welding, gas tungsten arc welding, plasma arc welding, submerged arc welding and laser beam welding of stainless and heat resisting s

40528,IS,Amd,ISO 14343:2002/Amd 1:2006,"Welding consumables — Wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and heat resisting steels — Classification — Amendment 1: Addition of strip electrodes for submerged arc welding and electroslag welding","Produits consommables pour le soudage — Fils-électrodes, fils d'apport et baguettes d'apport pour le soudage à l'arc des aciers inoxydables et des aciers résistant aux températures élevées — Classification — Amendement 1: Ajout des électrodes en feuillard pour le soudage à l'arc sous flux et le soudage sous laitier électro-conducteur",2006-03-15,1,['25.160.20'],IIW,9599,,[51588],"['en','fr']",3,

51588,IS,,ISO 14343:2009,"Welding consumables — Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels — Classification","Produits consommables pour le soudage — Fils-électrodes, électrodes en feuillard, fils d'apport et baguettes de soudage, pour le soudage à l'arc des aciers inoxydables et des aciers résistant aux températures élevées — Classification",2009-11-05,2,['25.160.20'],ISO/TC 44/SC 3,9599,"[24110,43489,40528]",[67727],"['en','fr','ru']",15,"<p>ISO 14343:2009 specifies requirements for classification of wire electrodes, strip electrodes, wires and rods for gas-shielded metal arc welding, gas tungsten arc welding, plasma arc welding

67727,IS,,ISO 14343:2017,"Welding consumables — Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels — Classification","Produits consommables pour le soudage — Fils-électrodes, électrodes en feuillard, fils d'apport et baguettes de soudage pour le soudage à l'arc des aciers inoxydables et des aciers résistant aux températures élevées — Classification",2017-03-31,3,['25.160.20'],ISO/TC 44/SC 3,9599,[51588],[86735],"['en','fr']",17,"<p>ISO 14343:2017 specifies requirements for classification of wire electrodes, strip electrodes, wires and rods for gas-shielded metal arc welding, gas tungsten arc welding, plasma arc welding, submerged arc weld

24111,IS,,ISO 14344:2002,Welding and allied processes — Flux and gas shielded electrical welding processes — Procurement guidelines for consumables,Soudage et techniques connexes — Procédés de soudage électrique sous protection gazeuse et par flux — Lignes directrices relatives à l'approvisionnement en produits consommables,2002-07-18,1,['25.160.20'],IIW,9599,,[51589],"['en','fr']",8,"<p>ISO 14344 is a tool for communication between a purchaser and a supplier of welding consumables within quality systems as might, for example, be based upon ISO 9001. Together with an ISO or other recognized welding consumable standard it provides a method for preparing those specific details needed for weldi

51589,IS,,ISO 14344:2010,Welding consumables — Procurement of filler materials and fluxes,Produits consommables pour le soudage — Approvisionnement en matériaux d'apport et flux,2010-02-15,2,['25.160.10'],ISO/TC 44/SC 3,9599,[24111],"[72263,78969,86233]","['en','fr']",9,"<p>ISO 14344:2010 specifies tools for communication between a purchaser and a supplier of welding consumables within quality systems, such as those based upon ISO 9001.</p><p>In production, the components of welding consumables are divided into discrete, predetermined quantities so that satisfactory tests with a sample from that quantity will establish that the entire quantity meets specification requirements. These quantiti

6026,IS,,ISO 1435:1981,Rubber compounding ingredients — Carbon black (pelletized) — Determination of sieve residue,Ingrédients de mélange du caoutchouc — Noir de carbone (en granules) — Détermination de la teneur en matières fines,1981-12-01,2,['83.040.20'],ISO/TC 45,9599,,[6027],"['en','fr']",2,

6027,IS,,ISO 1435:1988,Rubber compounding ingredients — Carbon black (pelletized) — Determination of fines content,Ingrédients de mélange du caoutchouc — Noir de carbone (en granules) — Détermination de la teneur en matières fines,1988-07-28,3,['83.040.20'],ISO/TC 45/SC 3,9599,[6026],[23843],"['en','fr']",2,

37269,IS,,ISO 14356:2003,Dentistry — Duplicating material,Art dentaire — Produits pour duplication,2003-03-05,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[83884],"['en','fr']",30,<p>ISO 14356:2002 specifies requirements and tests for the duplicating materials used in dentistry which are primarily intended for forming flexible moulds needed to produce positive refractory investment copies of properly blocked-out master models.</p>

28769,IS,,ISO 1436-1:2001,Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types — Specification — Part 1: Oil-based fluid applications,Tuyaux et flexibles en caoutchouc — Types hydrauliques avec armature de fils métalliques tressés — Spécifications — Partie 1: Applications pour fluide à base d'huile,2001-08-30,1,"['23.100.40','83.140.40']",ISO/TC 45/SC 1,9599,[6029],[45404],['en'],10,

6028,IS,,ISO 1436:1978,Rubber products — Hoses and hose assemblies — Wire reinforced hydraulic type,Produits en caoutchouc — Tuyaux et flexibles — Type avec armature de fils métalliques,1978-08-01,2,"['23.100.40','83.140.40']",ISO/TC 45,9599,,[6029],"['en','fr']",7,

6029,IS,,ISO 1436:1991,Rubber hoses and hose assemblies — Wire-reinforced hydraulic type — Specification,Tuyaux et flexibles en caoutchouc — Type hydraulique à armature de fils métalliques — Spécifications,1991-09-05,3,"['23.100.40','83.140.40']",ISO/TC 45/SC 1,9599,[6028],"[35566,28769]","['en','fr']",4,<p>Specifies requirements for six types of hoses and hose assemblies of internal diameter from 5 mm to 63 mm for use with common hydraulic fluids at temperatures ranging from -40°C to +100°C. This third edition cancels and replaces the second edition (1978).</p>

35566,IS,,ISO 1436-2:2005,Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types — Specification — Part 2: Water-based fluid applications,Tuyaux et flexibles en caoutchouc — Types hydrauliques avec armature de fils métalliques tressés — Spécifications — Partie 2: Applications pour fluide à base d'eau,2005-10-06,1,"['23.100.40','83.140.40']",ISO/TC 45/SC 1,9599,[6029],[45404],['en'],12,"<p>ISO 1436-2:2005 specifies requirements for six types of wire-braid-reinforced hose and hose assembly of nominal size from 5 to 51. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB at temperatures ranging from -40 °C to +60 °C.</p><p>This part of ISO 1436

45404,IS,,ISO 1436:2009,Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification,Tuyaux et flexibles en caoutchouc — Types hydrauliques avec armature de fils métalliques tressés pour fluides à base d'huile ou à base d'eau— Spécifications,2009-04-24,4,"['23.100.40','83.140.40']",ISO/TC 45/SC 1,9599,"[35566,28769]","[68047,70382]","['en','ru']",12,"<p>ISO 1436:2009 specifies requirements for six types of wire-braid-reinforced hose and hose assembly of nominal size from 5 to 51 plus, for one of the five types (type R2ATS), nominal size 63. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as de

55914,IS,Cor,ISO 1436:2009/Cor 1:2010,Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification — Technical Corrigendum 1,Tuyaux et flexibles en caoutchouc — Types hydrauliques avec armature de fils métalliques tressés pour fluides à base d'huile ou à base d'eau— Spécifications — Rectificatif technique 1,2010-02-05,4,"['23.100.40','83.140.40']",ISO/TC 45/SC 1,9599,,"[68047,70382]","['en','ru']",1,

70382,IS,,ISO 1436:2017,Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification,Tuyaux et flexibles en caoutchouc — Types hydrauliques avec armature de fils métalliques tressés pour fluides à base d'huile ou à base d'eau— Spécifications,2017-07-25,5,"['23.100.40','83.140.40']",ISO/TC 45/SC 1,9599,"[45404,55914]",[75648],['en'],13,"<p>ISO 1436:2017 specifies requirements for six types of wire-braid-reinforced hose and hose assembly of nominal size from 5 to 51 plus, for one of the five types (type R2ATS), nominal size 63.</p><p>They are suitable for use with:</p><p>- oil-based hydraulic fluids HH, HL, HM, HR and HV as d

75648,IS,,ISO 1436:2020,Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification,Tuyaux et flexibles en caoutchouc — Types hydrauliques avec armature de fils métalliques tressés pour fluides à base d'huile ou à base d'eau— Spécifications,2020-06-08,6,"['23.100.40','83.140.40']",ISO/TC 45/SC 1,9599,[70382],[89311],['en'],13,"<p>This document specifies requirements for six types of wire-braid-reinforced hoses and hose assemblies of nominal size from 5 to 51. This document also specifies the hose of nominal size 63 for types 2SN and R2AT, and the hose of nominal size 76 for type 2SN.</p><p>They are suitable for use with:</p><p>

6030,IS,,ISO 1437:1975,Carbon black for use in the rubber industry — Determination of sieve residue,Noir de carbone pour l'industrie des élastomères — Détermination du refus sur tamis,1975-03-01,1,['83.040.20'],ISO/TC 45,9599,,"[6031,6032]","['en','fr']",2,

6031,IS,,ISO 1437:1985,Rubber compounding ingredients — Carbon black — Determination of sieve residue,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination du refus sur tamis,1985-05-09,2,['83.040.20'],ISO/TC 45/SC 3,9599,[6030],[6032],"['en','fr']",2,

6032,IS,,ISO 1437:1992,Rubber compounding ingredients — Carbon black — Determination of sieve residue,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination du refus sur tamis,1992-04-09,3,['83.040.20'],ISO/TC 45/SC 3,9599,"[6030,6031]",[38927],"['en','fr']",2,"<p>Specifies a method for determining the water-wash sieve residue from regular, untreated carbon black for the rubber industry. It may not be applicable to oil-treated blacks because the oil could prevent proper wetting of the black by water.</p>"

38927,IS,,ISO 1437:2007,Rubber compounding ingredients — Carbon black — Determination of sieve residue,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination du refus sur tamis,2007-04-16,4,['83.040.20'],ISO/TC 45/SC 3,9599,[6032],[70381],"['en','fr']",6,"<p>ISO 1437:2007 specifies a method for determining the water-wash sieve residue from regular, untreated carbon black for the rubber industry. It may not be applicable to oil-treated blacks because the oil could prevent proper wetting of the black by water.</p>"

30620,IS,,ISO 14372:2000,Welding consumables — Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen,"Produits consommables pour le soudage — Détermination de la reprise d'humidité des électrodes utilisées en soudage manuel à l'arc avec électrode enrobée, par mesurage de l'hydrogène diffusible",2000-09-21,1,['25.160.20'],IIW,9599,,[54055],"['en','fr']",4,

24145,IS,,ISO 14373:2006,Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels,Soudage par résistance — Mode opératoire pour le soudage par points des aciers à bas carbone revêtus et non revêtus,2006-08-14,1,['25.160.10'],IIW,9599,,[61275],"['en','fr']",16,"<p>ISO 14373:2006 specifies requirements for resistance spot welding in the fabrication of assemblies of uncoated and metallic coated low carbon steel, comprising two or three sheets of metal, where the maximum single sheet thickness of components to be welded is within the range 0,4 mm to 3 mm, for the following materials:</p><ul><li>uncoated steels;</li><li>hot dip zinc or iron-zinc alloy (galvannealed

61275,IS,,ISO 14373:2015,Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels,Soudage par résistance — Mode opératoire pour le soudage par points des aciers à bas carbone revêtus et non revêtus,2015-03-13,2,['25.160.10'],ISO/TC 44/SC 6,9599,[24145],[83934],"['en','fr']",15,"<p>ISO 14373:2015 specifies requirements for resistance spot welding in the fabrication of assemblies of uncoated and metallic coated low carbon steel, comprising two or three sheets of metal, where the maximum single sheet thickness of components to be welded is within the range 0,4 mm to 3 mm, for the following materials: uncoated steels; hot-dip zinc or iron-zinc alloy (galvannealed)

24153,IS,,ISO 14378:2000,Milk and dried milk — Determination of iodide content — Method using high-performance liquid chromatography,Lait et lait en poudre — Détermination de la teneur en iodure — Méthode par chromatographie en phase liquide à haute performance,2000-06-15,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[53832],"['en','fr']",8,

6034,IS,,ISO 1438-1:1980,Water flow measurement in open channels using weirs and Venturi flumes — Part 1: Thin-plate weirs,Mesure de débit de l'eau dans les canaux découverts au moyen de déversoirs et de canaux Venturi — Partie 1: Déversoirs en mince paroi,1980-04-01,1,['17.120.20'],ISO/TC 113/SC 2,9599,[6033],[38066],"['en','fr']",27,"<p>Specifies methods for the measurement of water flow in open channels using rectangular and triangular-notch (V-notch) thin-plate weirs. The flow conditions considered are limited to steady, free and fully ventilated discharge. Recommended discharge coefficients are applicable to water only in the approximate range of temperatures from 5 to 30 °C.</p>" 6035,

6035,IS,Amd,ISO 1438-1:1980/Amd 1:1998,Water flow measurement in open channels using weirs and Venturi flumes — Part 1: Thin-plate weirs — Amendment 1,Mesure de débit de l'eau dans les canaux découverts au moyen de déversoirs et de canaux Venturi — Partie 1: Déversoirs en mince paroi — Amendement 1,1998-04-16,1,['17.120.20'],ISO/TC 113/SC 2,9599,,[38066],['en'],4,

6033,IS,,ISO 1438:1975,Liquid flow measurement in open channels using thin-plate weirs and Venturi flumes,Mesure de débit des liquides dans les canaux découverts au moyen de déversoirs en mince paroi et canaux Venturi,1975-07-01,1,['17.120.20'],ISO/TC 113,9599,,[6034],"['en','fr']",36,

38066,IS,,ISO 1438:2008,Hydrometry — Open channel flow measurement using thin-plate weirs,Hydrométrie — Mesure de débit dans les canaux découverts au moyen de déversoirs à paroi mince,2008-04-02,2,['17.120.20'],ISO/TC 113/SC 2,9599,"[6034,6035]",[66463],['en'],59,<p>ISO 1438:2008 defines the requirements for the use of rectangular and triangular (V-notch) thin-plate weirs for the measurement of flow of clear water in open channels under free flow conditions. It includes the requirements for the use of full-width rectangular thin-plate weirs in submerged (drowned) flow conditions.</p>

52426,IS,Cor,ISO 1438:2008/Cor 1:2008,Hydrometry — Open channel flow measurement using thin-plate weirs — Technical Corrigendum 1,Hydrométrie — Mesure de débit dans les canaux découverts au moyen de déversoirs à paroi mince — Rectificatif technique 1,2008-09-10,2,['17.120.20'],ISO/TC 113/SC 2,9599,,[66463],['en'],1,

54711,IS,,ISO 14389:2014,Textiles — Determination of the phthalate content — Tetrahydrofuran method,Textiles — Détermination de la teneur en phtalates — Méthode au tétrahydrofurane,2014-04-25,1,['59.060.01'],ISO/TC 38,9599,,[80463],"['en','fr']",22,<p>ISO 14389:2014 specifies a method of determining phthalates in textiles with gas chromatography-mass spectrometry (GC-MS) with mass selective detector. It is applicable to textile products where there is a risk of the presence of some phthalates.</p>

24200,IS,,ISO 14397-1:2002,Earth-moving machinery — Loaders and backhoe loaders — Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load,Engins de terrassement — Chargeuses et chargeuses-pelleteuses — Partie 1: Calcul de la charge utile nominale et méthode d'essai pour vérifier la charge de basculement calculée,2002-03-28,1,['53.100'],ISO/TC 127/SC 1,9599,,[39806],"['en','fr']",14,

24201,IS,,ISO 14397-2:2002,Earth-moving machinery — Loaders and backhoe loaders — Part 2: Test method for measuring breakout forces and lift capacity to maximum lift height,Engins de terrassement — Chargeuses et chargeuses-pelleteuses — Partie 2: Méthode d'essai pour mesurer les forces d'arrachement et la capacité de levage à la hauteur de levage maximale,2002-03-28,1,['53.100'],ISO/TC 127/SC 1,9599,,[39807],"['en','fr']",8,

3971,IS,,ISO 144:1973,Steel — Reverse bend testing of wire,Acier — Essai de pliage alterné des fils,1973-04-01,1,"['77.140.65','77.040.10']",ISO/TC 164/SC 2,9599,,[14695],"['en','fr']",3,

40021,IS,,ISO 14400:2005,"Road vehicles — Wheels and rims — Use, general maintenance and safety requirements and out-of-service conditions","Véhicules routiers — Roues et jantes — Exigences en matière d'utilisation, de maintenance générale et de sécurité, et conditions de mise hors service",2005-06-08,1,['43.040.50'],ISO/TC 22/SC 33,9599,,[72676],"['en','fr']",34,"<p>ISO 14400:2005 specifies requirements for the use, and general maintenance and safety of wheels and rims, and defines their out-of-service conditions, such as cracked, worn and bent wheels. It is applicable to wheels intended for use on road vehicles as defined in ISO 3833, excepting mopeds and motorcycles, and including multi-p

33097,IS,,ISO 14401-1:2004,Earth-moving machinery — Field of vision of surveillance and rear-view mirrors — Part 1: Test methods,Engins de terrassement — Champ de visibilité des rétroviseurs et des miroirs de surveillance — Partie 1: Méthodes d'essai,2004-03-05,1,['53.100'],ISO/TC 127/SC 1,9599,,[44175],"['en','fr']",4,"<p>ISO 14401-1:2004 specifies two test methods for determining the field of vision provided by surveillance and rear-view mirrors for seated operators of earth moving machinery. It is applicable to self-propelled wheeled and track-type earth-moving machinery as defined in ISO 6165, used on and off public roads.</p>"

33098,IS,,ISO 14401-2:2004,Earth-moving machinery — Field of vision of surveillance and rear-view mirrors — Part 2: Performance criteria,Engins de terrassement — Champ de visibilité des rétroviseurs et des miroirs de surveillance — Partie 2: Critères de performance,2004-02-27,1,['53.100'],ISO/TC 127/SC 1,9599,,[44176],"['en','fr']",10,"<p>ISO 14401-2:2004 specifies criteria for the field of vision performance of surveillance and rear-view mirrors on earth-moving machinery. It is applicable to self-propelled wheeled and track-type earth-moving machinery with a seated operator, as defined in ISO 6165, used on and off public roads. </p>"

23709,IS,,ISO 14403:2002,Water quality — Determination of total cyanide and free cyanide by continuous flow analysis,Qualité de l'eau — Dosage des cyanures totaux et des cyanures libres par analyse en flux continu,2002-03-28,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[52208],"['en','fr']",18,

57298,IS,,ISO 14404-1:2013,Calculation method of carbon dioxide emission intensity from iron and steel production — Part 1: Steel plant with blast furnace,Méthode de calcul de l'intensité de l'émission de dioxyde de carbone de la production de la fonte et de l'acier — Partie 1: Usine sidérurgique avec haut fourneau,2013-03-15,1,"['77.080.01','13.020.40']",ISO/TC 17/SC 21,9599,,[88110],['en'],24,"<p>ISO 14404-1:2013 specifies calculation methods for the carbon dioxide (CO₂) intensity of plant where steel is produced through a blast furnace.</p><p>It includes boundary definition, material and energy flow definition and emission factor of CO₂. Besides direct source import

57299,IS,,ISO 14404-2:2013,Calculation method of carbon dioxide emission intensity from iron and steel production — Part 2: Steel plant with electric arc furnace (EAF),Méthode de calcul de l'intensité de l'émission de dioxyde de carbone de la production de la fonte et de l'acier — Partie 2: Usine sidérurgique équipée d'un four électrique à arc (FEA),2013-03-18,1,"['77.080.01','13.020.40']",ISO/TC 17/SC 21,9599,,[88111],['en'],19,"<p>ISO 14404-2:2013 specifies calculation methods which companies using EAF to manufacture steel can use to evaluate the total annual carbon dioxide (CO₂) emissions and the emission factor of CO₂ per unit of steel production of the entire steel