Withdrawn and superseded ISO standards — page 41 of 246

50316,IS,Amd,ISO 14122-1:2001/Amd 1:2010,Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means of access between two levels — Amendment 1,Sécurité des machines — Moyens d'accès permanents aux machines — Partie 1: Choix d'un moyen d'accès fixe entre deux niveaux — Amendement 1,2010-04-12,1,['13.110'],ISO/TC 199,9599,,[61279],"['en','fr']",2,

27629,IS,,ISO 14122-2:2001,Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways,Sécurité des machines — Moyens d'accès permanents aux machines — Partie 2: Plates-formes de travail et passerelles,2001-06-07,1,['13.110'],ISO/TC 199,9599,,[61281],"['en','fr']",8,

50317,IS,Amd,ISO 14122-2:2001/Amd 1:2010,Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways — Amendment 1,Sécurité des machines — Moyens d'accès permanents aux machines — Partie 2: Plates-formes de travail et passerelles — Amendement 1,2010-04-12,1,['13.110'],ISO/TC 199,9599,,[61281],"['en','fr']",2,

27630,IS,,ISO 14122-3:2001,"Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails","Sécurité des machines — Moyens d'accès permanents aux machines — Partie 3: Escaliers, échelles à marches et garde-corps",2001-06-07,1,['13.110'],ISO/TC 199,9599,,[61282],"['en','fr']",14,

50318,IS,Amd,ISO 14122-3:2001/Amd 1:2010,"Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails — Amendment 1","Sécurité des machines — Moyens d'accès permanents aux machines — Partie 3: Escaliers, échelles à marches et garde-corps — Amendement 1",2010-04-12,1,['13.110'],ISO/TC 199,9599,,[61282],"['en','fr']",2,

27631,IS,,ISO 14122-4:2004,Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders,Sécurité des machines — Moyens d'accès permanents aux machines — Partie 4: Échelles fixes,2004-12-01,1,['13.110'],ISO/TC 199,9599,,[61283],"['en','fr']",29,"<p>ISO 14122-4:2004 applies to all machinery (stationary and mobile) where fixed means of access are necessary.</p><p>The purpose of the standard is to define the general requirements for safe access to machines mentioned in ISO 12100-2. ISO 14122-1 gives advice about the correct choice of access means when the necessary access to the machine is not possible directly from the ground level or from a floor.</p><p>The standard app

44705,IS,Amd,ISO 14122-4:2004/Amd 1:2010,Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders — Amendment 1,Sécurité des machines — Moyens d'accès permanents aux machines — Partie 4: Échelles fixes — Amendement 1,2010-04-12,1,['13.110'],ISO/TC 199,9599,,[61283],"['en','fr']",4,

22588,IS,,ISO 14123-1:1998,Safety of machinery — Reduction of risks to health from hazardous substances emitted by machinery — Part 1: Principles and specifications for machinery manufacturers,Sécurité des machines — Réduction des risques pour la santé résultant de substances dangereuses émises par des machines — Partie 1: Principes et spécifications à l'intention des constructeurs de machines,1998-04-23,1,['13.110'],ISO/TC 199,9599,,[66983],"['en','fr']",9,

22589,IS,,ISO 14123-2:1998,Safety of machinery — Reduction of risks to health from hazardous substances emitted by machinery — Part 2: Methodology leading to verification procedures,Sécurité des machines — Réduction des risques pour la santé résultant de substances dangereuses émises par des machines — Partie 2: Méthodologie menant à des procédures de vérification,1998-04-23,1,['13.110'],ISO/TC 199,9599,,[66984],"['en','fr']",6,

23638,IS,,ISO 14126:1999,Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction,Composites plastiques renforcés de fibres — Détermination des caractéristiques en compression dans le plan,1999-09-09,1,['83.120'],ISO/TC 61/SC 13,9599,[15741],[80371],"['en','fr']",18,"<p><b>1.1 </b>This International Standard specifies two methods for determining compressive properties, in directions parallel</p><p>to the plane of lamination, of fibre-reinforced plastic composites.</p><p><b>1.2 </b>The compressive properties are of interest for specifications and quality-control purposes.</p><p><b>1.3 </b>Two loading methods and two types of specimen are describe

35639,IS,Cor,ISO 14126:1999/Cor 1:2001,Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction — Technical Corrigendum 1,Composites plastiques renforcés de fibres — Détermination des caractéristiques en compression dans le plan — Rectificatif technique 1,2001-07-19,1,['83.120'],ISO/TC 61/SC 13,9599,,[80371],"['en','fr']",1,

37222,IS,,ISO 14127:2008,"Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents","Composites renforcés de fibres de carbone — Détermination des teneurs en résine, en fibre et en vide",2008-03-04,1,['83.120'],ISO/TC 61/SC 13,9599,,[84376],"['en','fr','ru']",10,"<p>ISO 14127:2008 specifies methods for calculating the resin, fibre and void contents of a carbon-fibre-reinforced composite from the densities of the resin, the fibre and the composite and the mass of fibre in the composite (method A) and for calculating the fibre content from the thickness of the composite (method B).</p><p>Method A specifies three different resin removal procedures for the determi

6002,IS,,ISO 1413:1973,Shock-resistant wristwatches,Montres-bracelet résistant aux chocs,1973-09-01,1,['39.040.10'],ISO/TC 114/SC 1,9599,,[6003],"['en','fr']",3,

6003,IS,,ISO 1413:1984,Horology — Shock-resistant watches,Horlogerie — Montres résistant aux chocs,1984-04-01,2,['39.040.10'],ISO/TC 114/SC 1,9599,[6002],[62753],"['en','fr']",3,<p>Specifies the minimum requirements and describes the corresponding method of test. It is intended to allow homologation tests rather than the individual control of all watches of a production of a production batch. It is based on the simulation of the shock received by a watch on falling accidentally from a height of 1 m on to a horizontal hardwood surface.</p>

23652,IS,,ISO 14132-1:2002,Optics and optical instruments — Vocabulary for telescopic systems — Part 1: General terms and alphabetical indexes of terms in ISO 14132,Optique et instruments d'optique — Vocabulaire relatif aux systèmes télescopiques — Partie 1: Termes généraux et index alphabétiques des termes dans l'ISO 14132,2002-11-28,1,"['37.020','01.040.37']",ISO/TC 172/SC 4,9599,,[66244],"['en','fr','ru']",29,

25337,IS,,ISO 14132-2:2002,"Optics and optical instruments — Vocabulary for telescopic systems — Part 2: Terms for binoculars, monoculars and spotting scopes","Optique et instruments d'optique — Vocabulaire relatif aux systèmes télescopiques — Partie 2: Termes pour jumelles, monoculaires et lunettes",2002-11-28,1,"['37.020','01.040.37']",ISO/TC 172/SC 4,9599,,[66245],"['en','fr','ru']",13,

44115,IS,Cor,ISO 14132-2:2002/Cor 1:2006,"Optics and optical instruments — Vocabulary for telescopic systems — Part 2: Terms for binoculars, monoculars and spotting scopes — Technical Corrigendum 1","Optique et instruments d'optique — Vocabulaire relatif aux systèmes télescopiques — Partie 2: Termes pour jumelles, monoculaires et lunettes — Rectificatif technique 1",2006-07-26,1,"['37.020','01.040.37']",ISO/TC 172/SC 4,9599,,[66245],"['en','fr','ru']",2,

25338,IS,,ISO 14132-3:2002,Optics and optical instruments — Vocabulary for telescopic systems — Part 3: Terms for telescopic sights,Optique et instruments d'optique — Vocabulaire relatif aux systèmes télescopiques — Partie 3: Termes pour lunettes de pointage,2002-11-28,1,"['37.020','01.040.37']",ISO/TC 172/SC 4,9599,,[62423],"['en','fr','ru']",7,

62423,IS,,ISO 14132-3:2014,Optics and photonics — Vocabulary for telescopic systems — Part 3: Terms for telescopic sights,Optique et photonique — Vocabulaire relatif aux systèmes télescopiques — Partie 3: Termes pour lunettes de pointage,2014-11-10,2,"['37.020','01.040.37']",ISO/TC 172/SC 4,9599,[25338],[78538],['en'],4,"<p>This part of ISO 14132 applies to telescopic sights used on hand-held firearms and airguns and gives terms and definitions for telescopic sights only.</p><p>The alphabetical indexes of terms in English, French, Russian, and German that are common for all published parts of ISO 14132 are published in ISO 14132‑1.</p><p>The definitions can be changed, if required, by introd

25339,IS,,ISO 14132-4:2002,Optics and optical instruments — Vocabulary for telescopic systems — Part 4: Terms for astronomical telescopes,Optique et instruments d'optique — Vocabulaire relatif aux systèmes télescopiques — Partie 4: Termes pour télescopes astronomiques,2002-11-28,1,"['37.020','01.040.37']",ISO/TC 172/SC 4,9599,,[66246],"['en','fr','ru']",7,

37837,IS,,ISO 14133-1:2006,"Optics and optical instruments — Specifications for binoculars, monoculars and spotting scopes — Part 1: General purpose instruments","Optique et instruments d'optique — Spécifications pour jumelles, monoculaires et lunettes — Partie 1: Instruments d'usage général",2006-03-15,1,['37.020'],ISO/TC 172/SC 4,9599,,[68887],['en'],5,"<p>ISO 14133-1:2006 is applicable to general purpose binoculars, monoculars and spotting scopes. It is not applicable to high performance binoculars, monoculars and spotting scopes, which are specified in ISO 14133-2.</p>"

68887,IS,,ISO 14133-1:2016,"Optics and photonics — Specifications for binoculars, monoculars and spotting scopes — Part 1: General purpose instruments","Optique et photonique — Spécifications pour jumelles, monoculaires et lunettes — Partie 1: Instruments d'usage général",2016-05-02,2,['37.020'],ISO/TC 172/SC 4,9599,[37837],[84015],['en'],5,"<p>ISO 14133-1:2016 gives requirements for general purpose binoculars, monoculars and spotting scopes. It is not applicable to high performance binoculars, monoculars and spotting scopes, which are specified in ISO 14133‑2.</p>"

42164,IS,,ISO 14133-2:2006,"Optics and optical instruments — Specifications for binoculars, monoculars and spotting scopes — Part 2: High performance instruments","Optique et instruments d'optique — Spécifications pour jumelles, monoculaires et lunettes — Partie 2: Instruments haute performance",2006-03-15,1,['37.020'],ISO/TC 172/SC 4,9599,,[68888],['en'],5,"<p>ISO 14133-2:2006 is applicable to high performance binoculars, monoculars and spotting scopes. It is not applicable to general purpose binoculars, monoculars and spotting scopes which are specified in ISO 14133-1.</p>"

68888,IS,,ISO 14133-2:2016,"Optics and photonics — Specifications for binoculars, monoculars and spotting scopes — Part 2: High performance instruments","Optique et photonique — Spécifications pour jumelles, monoculaires et lunettes — Partie 2: Instruments haute performance",2016-05-02,2,['37.020'],ISO/TC 172/SC 4,9599,[42164],"[84016,84015]",['en'],5,"<p>ISO 14133-2:2016 gives requirements for high performance binoculars, monoculars and spotting scopes. It is not applicable to general purpose binoculars, monoculars and spotting scopes which are specified in ISO 14133‑1.</p>"

39174,IS,,ISO 14135-1:2003,Optics and optical instruments — Specifications for telescopic sights — Part 1: General-purpose instruments,Optique et instruments d'optique — Spécifications pour lunettes de pointage — Partie 1: Instruments pour usage général,2003-12-03,1,['37.020'],ISO/TC 172/SC 4,9599,,[62427],['en'],7,"<p>ISO 14135-1:2003 applies to general-purpose telescopic sights, used on hand-held firearms and airguns. It contains a classification to the usage of telescopic sights and specifies interfaces, minimum requirements and tolerances to their performances. </p>"

62427,IS,,ISO 14135-1:2014,Optics and photonics — Specifications for telescopic sights — Part 1: General-purpose instruments,Optique et photonique — Spécifications pour lunettes de pointage — Partie 1: Instruments pour usage général,2014-09-18,2,['37.020'],ISO/TC 172/SC 4,9599,[39174],[70461],['en'],6,"<p>ISO 14135-1:2014 applies to general-purpose telescopic sights, used on hand-held firearms and airguns. It contains a classification to the usage of telescopic sights and specifies interfaces, minimum requirements, and tolerances to their performances.</p><p>High-performance telescopic sights are specified in ISO 14135‑2.</p>"

70461,IS,,ISO 14135-1:2017,Optics and photonics — Specifications for telescopic sights — Part 1: General-purpose instruments,Optique et photonique — Spécifications pour lunettes de pointage — Partie 1: Instruments pour usage général,2017-07-31,3,['37.020'],ISO/TC 172/SC 4,9599,[62427],[78536],['en'],9,"<p>ISO 14135-1:2017 applies to general-purpose telescopic sights, used on hand-held firearms and airguns. It contains a classification to the usage of telescopic sights and specifies interfaces, minimum requirements and tolerances to their performances.</p><p>High-performance telescopic sights are specified in ISO 14135-2.</p>"

28717,IS,,ISO 14135-2:2003,Optics and optical instruments — Specifications for telescopic sights — Part 2: High-performance instruments,Optique et instruments d'optique — Spécifications pour lunettes de pointage — Partie 2: Instruments haute performance,2003-12-03,1,['37.020'],ISO/TC 172/SC 4,9599,,[62428],['en'],7,"<p>ISO 14135-2:2003 applies to high-performance telescopic sights, used on hand-held firearms and airguns. It contains a classification of the usage of telescopic sights and specifies interfaces, minimum requirements and tolerances to their performances. </p>"

62428,IS,,ISO 14135-2:2014,Optics and photonics — Specifications for telescopic sights — Part 2: High-performance instruments,Optique et photonique — Spécifications pour lunettes de pointage — Partie 2: Instruments haute performance,2014-09-18,2,['37.020'],ISO/TC 172/SC 4,9599,[28717],[70462],['en'],6,"<p>ISO 14135-2:2014 applies to high-performance telescopic sights, used on hand-held firearms and airguns. It contains a classification of the usage of telescopic sights and specifies interfaces, minimum requirements, and tolerances to their performances.</p><p>General-purpose telescopic sights are specified in ISO 14135‑1.</p>"

70462,IS,,ISO 14135-2:2017,Optics and photonics — Specifications for telescopic sights — Part 2: High-performance instruments,Optique et photonique — Spécifications pour lunettes de pointage — Partie 2: Instruments haute performance,2017-07-31,3,['37.020'],ISO/TC 172/SC 4,9599,[62428],[78537],['en'],9,"<p>ISO 14135-2:2017 applies to high-performance telescopic sights, used on hand-held firearms and airguns. It contains a classification of the usage of telescopic sights and specifies interfaces, minimum requirements and tolerances to their performances.</p><p>General-purpose telescopic sights are specified in ISO 14135-1.</p>"

23658,IS,,ISO 14137:2000,Machine tools — Test conditions for wire electrical-discharge machines (wire EDM) — Terminology and testing of the accuracy,Machines-outils — Conditions d'essai des machines d'électroérosion à fil (fil EDM) — Terminologie et contrôle de la précision,2000-04-06,1,['25.080.99'],ISO/TC 39/SC 2,9599,,[60023],"['en','fr']",22,

23719,IS,,ISO 14145-1:1998,Roller ball pens and refills — Part 1: General use,Stylos rollers et recharges — Partie 1: Utilisation générale,1998-04-16,1,['97.180'],ISO/TC 10,9599,,[69123],"['en','fr']",8,

54336,IS,Amd,ISO 14145-1:1998/Amd 1:2011,Roller ball pens and refills — Part 1: General use — Amendment 1: Ball diameter for tip classification,Stylos rollers et recharges — Partie 1: Utilisation générale — Amendement 1: Diamètre de la bille pour la classification des pointes,2011-02-23,1,['97.180'],ISO/TC 10,9599,,[69123],"['en','fr']",2,

69123,IS,,ISO 14145-1:2016,Roller ball pens and refills — Part 1: General use,Stylos rollers et recharges — Partie 1: Utilisation générale,2016-10-13,2,['97.180'],ISO/TC 10,9599,"[23719,54336]",[73282],"['en','fr']",9,<p>ISO 14145-1:2016 establishes minimum quality requirements for roller ball pens (refillable and non-refillable) and refills for general use.</p><p>Additional requirements for roller ball pens for documentary use are given in ISO 14145‑2.</p>

20876,IS,,ISO 14146:2000,Radiation protection — Criteria and performance limits for the periodic evaluation of processors of personal dosemeters for X and gamma radiation,Radioprotection — Critères et limites d'habilitation pour l'évaluation périodique des exploitants de dosimètres individuels pour les rayons X et gamma,2000-05-18,1,['13.280'],ISO/TC 85/SC 2,9599,,[66894],"['en','fr']",5,

66894,IS,,ISO 14146:2018,Radiological protection — Criteria and performance limits for the periodic evaluation of dosimetry services,Radioprotection — Critères et limites de performance pour l'évaluation périodique des services de dosimétrie,2018-07-17,2,['13.280'],ISO/TC 85/SC 2,9599,[20876],[85249],"['en','fr']",12,"<p>The quality of a supplier of a dosimetry service depends on both the characteristics of the approved (type‑tested) dosimetry system[1] and the training and experience of the staff, together with the calibration procedures and quality assurance programmes.</p><p>This document specifies the criteria and the test procedures to be used for the periodic verification of the perfor

31723,IS,,ISO 14155-1:2003,Clinical investigation of medical devices for human subjects — Part 1: General requirements,Investigation clinique des dispositifs médicaux pour sujets humains — Partie 1: Exigences générales,2003-02-26,1,['11.100.20'],ISO/TC 194,9599,[23736],"[45557,41176]","['en','fr']",21,"<p>ISO 14155-1:2002 defines procedures for the conduct and performance of clinical investigations of medical devices. It specifies general requirements intended to:</p><ul><li>protect human subjects;</li><li>ensure the scientific conduct of the clinical investigation;</li><li>assist sponsors, monitors, investigators, ethics committees, regulatory authorities and bodies involved in the conformi

23736,IS,,ISO 14155:1996,Clinical investigation of medical devices,Investigations cliniques des dispositifs médicaux,1996-02-29,1,['11.100'],ISO/TC 194,9599,,"[31723,32217]","['en','fr']",12,"<p>Pertains to the clinical investigation in human subjects of those medical devices whose clinical performance needs assessment. Specifies the requirements for conducting the clinical investigation and documentation. Provides the framework for systematic written procedures for the organization, design, implementation and data collection.</p>"

32217,IS,,ISO 14155-2:2003,Clinical investigation of medical devices for human subjects — Part 2: Clinical investigation plans,Investigation clinique des dispositifs médicaux pour sujets humains — Partie 2: Plans d'investigation clinique,2003-05-16,1,['11.100.20'],ISO/TC 194,9599,[23736],"[45557,41177]",['en'],9,<p>This part of EN ISO 14155 provides requirements for the preparation of a Clinical Investigation Plan (CIP) for the clinical investigation of medical devices. The compilation of a CIP in accordance with the requirements of this standard and adherence to it will help in optimising the scientific validity and reproducibility of the results of a clinical investigation.</p><p>This Stan

45557,IS,,ISO 14155:2011,Clinical investigation of medical devices for human subjects — Good clinical practice,Investigation clinique des dispositifs médicaux pour sujets humains — Bonnes pratiques cliniques,2011-01-21,2,['11.100.20'],ISO/TC 194,9599,"[31723,32217]",[71690],"['en','fr','ru']",58,"<p>ISO 14155:2011 addresses good clinical practice for the design, conduct, recording and reporting of clinical investigations carried out in human subjects to assess the safety or performance of medical devices for regulatory purposes. </p><p>The principles set forth in ISO 14155:2011 also apply to all other clinical investigations and should be followed as far as possible, depending on the nature

59992,IS,Cor,ISO 14155:2011/Cor 1:2011,Clinical investigation of medical devices for human subjects — Good clinical practice — Technical Corrigendum 1,Investigation clinique des dispositifs médicaux pour sujets humains — Bonnes pratiques cliniques — Rectificatif technique 1,2011-07-15,2,['11.100.20'],ISO/TC 194,9599,,[71690],"['en','ru']",1,

71690,IS,,ISO 14155:2020,Clinical investigation of medical devices for human subjects — Good clinical practice,Investigation clinique des dispositifs médicaux pour sujets humains — Bonne pratique clinique,2020-07-28,3,['11.100.20'],ISO/TC 194,9599,"[59992,45557]",[83968],"['en','fr']",83,"<p>This document addresses good clinical practice for the design, conduct, recording and reporting of clinical investigations carried out in human subjects to assess the clinical performance or effectiveness and safety of medical devices.</p><p>For post-market clinical investigations, the principles set forth in this document are intended to be followed as far as relevant, considering the nature of the clin

23746,IS,,ISO 14156:2001,Milk and milk products — Extraction methods for lipids and liposoluble compounds,Lait et produits laitiers — Méthodes d'extraction des lipides et des composés liposolubles,2001-12-13,1,['67.100.01'],ISO/TC 34/SC 5,9599,,[92562],"['en','fr']",6,"<p>ISO 14156|IDF 172:2001 specifies methods for the extraction or separation of a representative part of the fat, containing lipids and liposoluble compounds, from milk and milk products.</p><p>The method is applicable to pretreatment of samples for the methods described in ISO 15884 and ISO 15885.</p><p>It should be noted that free fatty acids are not part of extracted fat as described in methods for the fat determination in

40457,IS,Amd,ISO 14156:2001/Amd 1:2007,Milk and milk products — Extraction methods for lipids and liposoluble compounds — Amendment 1,Lait et produits laitiers — Méthodes d'extraction des lipides et des composés liposolubles — Amendement 1,2007-11-19,1,['67.100.01'],ISO/TC 34/SC 5,9599,,[92562],"['en','fr']",1,

22967,IS,,ISO 14160:1998,Sterilization of single-use medical devices incorporating materials of animal origin — Validation and routine control of sterilization by liquid chemical sterilants,Stérilisation des dispositifs médicaux non réutilisables contenant des matières d'origine animale — Validation et contrôle de routine de la stérilisation par agents stérilisants chimiques liquides,1998-03-05,1,['11.080.01'],ISO/TC 198,9599,,[44956],"['en','fr']",21,

44956,IS,,ISO 14160:2011,"Sterilization of health care products — Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives — Requirements for characterization, development, validation and routine control of a sterilization process for medical devices","Stérilisation des produits de santé — Agents stérilisants chimiques liquides pour dispositifs médicaux non réutilisables utilisant des tissus animaux et leurs dérivés — Exigences pour la caractérisation, le développement, la validation et le contrôle de routine d'un procédé de stérilisation de dispositifs médicaux",2011-07-01,2,['11.080.01'],ISO/TC 198,9599,[22967],[73159],"['en','fr','ru

22966,IS,,ISO 14161:2000,"Sterilization of health care products — Biological indicators — Guidance for the selection, use and interpretation of results","Stérilisation des produits de santé — Indicateurs biologiques — Directives générales pour la sélection, l'utilisation et l'interprétation des résultats",2000-09-28,1,['11.080.01'],ISO/TC 198,9599,,[43350],"['en','fr']",40,

43350,IS,,ISO 14161:2009,"Sterilization of health care products — Biological indicators — Guidance for the selection, use and interpretation of results","Stérilisation des produits de santé — Indicateurs biologiques — Directives générales pour la sélection, l'utilisation et l'interprétation des résultats",2009-09-04,2,['11.080.01'],ISO/TC 198,9599,[22966],"[66449,74113]","['en','fr']",63,"<p>ISO 14161:2009 provides guidance for the selection, use and interpretation of results from application of biological indicators when used in the development, validation and routine monitoring of sterilization processes.</p><p>ISO 14161:2009 applies to biological indicators for which International Standar

37128,IS,,ISO 14168:2003,"Metallic powders, excluding hardmetals — Method for testing copper-base infiltrating powders","Poudres métalliques, à l'exclusion des métaux-durs — Méthode d'essai des poudres infiltrantes à base cuivre",2003-02-06,1,['77.160'],ISO/TC 119/SC 2,9599,,[56859],"['en','fr']",4,<p>ISO 14168:2003 specifies a method for determining the performance characteristics of copper-base infiltrating powders.</p>

35668,IS,,ISO 14171:2002,Welding consumables — Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels — Classification,Produits consommables pour le soudage — Fils-électrodes et couples fils-flux pour le soudage à l'arc sous flux des aciers non alliés et à grains fins — Classification,2002-10-25,1,['25.160.20'],ISO/TC 44/SC 3,9599,,[46312],"['en','fr']",13,"<p>ISO 14171:2002 specifies requirements for the classification of wire-flux combinations and all-weld metal in the as-welded condition and in the post weld heat-treated condition for submerged arc welding of non alloy and fine grain steels with a minimum yield strength of up to 500 N/mm<su

46312,IS,,ISO 14171:2010,"Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels — Classification","Produits consommables pour le soudage — Fils-électrodes pleins, fils-électrodes fourrés et couples fils-flux pour le soudage à l'arc sous flux des aciers non alliés et à grains fins — Classification",2010-09-29,2,['25.160.20'],ISO/TC 44/SC 3,9599,[35668],[68753],"['en','fr']",20,"<p>ISO 14171:2010 specifies requirements for the classification of electrode/flux combinations and weld metal in the as-welded condition and in the post-weld heat-treated condition for submerged arc welding of n

38419,IS,,ISO 14172:2003,Welding consumables — Covered electrodes for manual metal arc welding of nickel and nickel alloys — Classification,Produits consommables pour le soudage — Électrodes enrobées pour le soudage manuel à l'arc du nickel et des alliages de nickel — Classification,2003-11-14,1,['25.160.20'],ISO/TC 44/SC 3,9599,,[44991],"['en','fr']",15,<p>ISO 14172:2003 prescribes requirements for the classification of nickel and nickel alloy covered electrodes for manual metal arc welding and overlaying. It includes those compositions in which the nickel content exceeds that of any other element.</p>

40829,IS,Cor,ISO 14172:2003/Cor 1:2004,Welding consumables — Covered electrodes for manual metal arc welding of nickel and nickel alloys — Classification — Technical Corrigendum 1,Produits consommables pour le soudage — Électrodes enrobées pour le soudage manuel à l'arc du nickel et des alliages de nickel — Classification — Rectificatif technique 1,2004-06-29,1,['25.160.20'],ISO/TC 44/SC 3,9599,,[44991],"['en','fr']",2,

42179,IS,Cor,ISO 14172:2003/Cor 2:2005,Welding consumables — Covered electrodes for manual metal arc welding of nickel and nickel alloys — Classification — Technical Corrigendum 2,Produits consommables pour le soudage — Électrodes enrobées pour le soudage manuel à l'arc du nickel et des alliages de nickel — Classification — Rectificatif technique 2,2005-05-30,1,['25.160.20'],ISO/TC 44/SC 3,9599,,[44991],"['en','fr']",4,

44991,IS,,ISO 14172:2008,Welding consumables — Covered electrodes for manual metal arc welding of nickel and nickel alloys — Classification,Produits consommables pour le soudage — Électrodes enrobées pour le soudage manuel à l'arc du nickel et des alliages de nickel — Classification,2008-10-08,2,['25.160.20'],ISO/TC 44/SC 3,9599,"[42179,40829,38419]",[64571],"['en','fr']",17,<p>ISO 14172:2008 prescribes requirements for the classification of nickel- and nickel-alloy-covered electrodes for manual metal arc welding and overlaying. It includes those compositions in which the nickel content exceeds that of any other element.</p>

64571,IS,,ISO 14172:2015,Welding consumables — Covered electrodes for manual metal arc welding of nickel and nickel alloys — Classification,Produits consommables pour le soudage — Électrodes enrobées pour le soudage manuel à l'arc du nickel et des alliages de nickel — Classification,2015-09-11,3,['25.160.20'],ISO/TC 44/SC 3,9599,[44991],[81939],"['en','fr']",19,<p>ISO 14172:2015 prescribes requirements for the classification of nickel and nickel-alloy covered electrodes for manual metal arc welding and overlaying. It includes those compositions in which the nickel content exceeds that of any other element.</p>

35669,IS,,ISO 14174:2004,Welding consumables — Fluxes for submerged arc welding — Classification,Produits consommables pour le soudage — Flux pour le soudage à l'arc sous flux — Classification,2004-06-22,1,['25.160.20'],ISO/TC 44/SC 3,9599,,[51249],"['en','fr']",12,"<p>ISO 14174:2004 applies to fluxes for the submerged arc welding of non alloy and fine grain steels, high strength steels, creep resisting steels, and stainless and heat resisting steels, nickel and nickel alloys for joining and overlay welding using wire electrodes and strip electrodes.</p>"

51249,IS,,ISO 14174:2012,Welding consumables — Fluxes for submerged arc welding and electroslag welding — Classification,Produits consommables pour le soudage — Flux pour le soudage à l'arc sous flux et le soudage sous laitier — Classification,2012-02-06,2,['25.160.20'],ISO/TC 44/SC 3,9599,[35669],[73877],"['en','fr']",16,"<p>ISO 14174:2012 specifies requirements for classification of fluxes for submerged arc welding and electroslag welding for joining and overlay welding using wire electrodes, tubular cored electrodes, and strip electrodes.</p>"

23827,IS,,ISO 14175:1997,Welding consumables — Shielding gases for arc welding and cutting,Produits consommables pour le soudage — Gaz de protection pour le soudage par fusion et techniques connexes,1997-03-27,1,"['25.160.20','71.100.20']",ISO/TC 44/SC 3,9599,,[39569],"['en','fr']",7,

21429,IS,,ISO 14180:1998,Solid mineral fuels — Guidance on the sampling of coal seams,Combustibles minéraux solides — Principes directeurs pour l'échantillonnage des veines de charbon,1998-08-06,1,['73.040'],ISO/TC 27/SC 4,9599,,[66498],['en'],15,

66498,IS,,ISO 14180:2017,Solid mineral fuels — Guidance on the sampling of coal seams,Combustibles minéraux solides — Principes directeurs pour l'échantillonnage des veines de charbon,2017-04-10,2,['73.040'],ISO/TC 27/SC 4,9599,[21429],[86183],['en'],23,"<p>ISO 14180:2017 provides guidance on methods for taking samples from coal seams in the ground, whether from exploration areas or tenements, or from operating underground or open-cut mines. The following methods are described:</p><p>a) sampling of small or large diameter holes;</p><p>b) drill cuttings sampling;</p><p>c) open-cut slot sampling;</p><p>d) adit, drift or shaft sampling;</p><p>e) pillar sampling;</p><p>f) chan

23871,IS,,ISO 14184-1:1998,Textiles — Determination of formaldehyde — Part 1: Free and hydrolized formaldehyde (water extraction method),Textiles — Dosage du formaldéhyde — Partie 1: Formaldéhyde libre et hydrolysé (méthode par extraction d'eau),1998-12-20,1,['59.080.01'],ISO/TC 38,9599,,[55524],"['en','fr']",10,

23872,IS,,ISO 14184-2:1998,Textiles — Determination of formaldehyde — Part 2: Released formaldehyde (vapour absorption method),Textiles — Dosage du formaldéhyde — Partie 2: Formaldéhyde dégagé (méthode par absorption de vapeur),1998-08-20,1,['59.080.01'],ISO/TC 38,9599,,[55525],"['en','fr']",13,

6005,IS,,ISO 1419:1977,Fabrics coated with rubber or plastics — Accelerated ageing and simulated service tests,Supports textiles revêtus de caoutchouc ou de plastique — Essais de vieillissement accéléré et de tenue à la chaleur,1977-05-01,1,['83.140'],ISO/TC 45,9599,,[6006],"['en','fr']",2,

6006,IS,,ISO 1419:1995,Rubber- or plastics-coated fabrics — Accelerated-ageing tests,Supports textiles revêtus de caoutchouc ou de plastique — Essais de vieillissement accéléré,1995-06-22,2,['59.080.40'],ISO/TC 45/SC 4,9599,[6005],[70221],"['en','fr']",4,<p>Cancels and replaces the first edition (1977). Describes four methods of assessing the resistance of coated fabrics to deterioration by accelerated ageing: Method A: Loss of volatiles on heating of plasticized-PVC-coated fabrics; Method B: General method; Method C: Tropical test; Method D: Ageing test for nitrocellulose-type coatings.</p>

70221,IS,,ISO 1419:2018,Rubber- or plastics-coated fabrics — Accelerated-ageing tests,Supports textiles revêtus de caoutchouc ou de plastique — Essais de vieillissement accéléré,2018-08-10,3,['59.080.40'],ISO/TC 45/SC 4,9599,[6006],[77360],['en'],6,<p>This document describes four methods of assessing the resistance of coated fabrics to deterioration by accelerated ageing.</p>

66767,IS,,ISO 14199:2015,Health informatics — Information models — Biomedical Research Integrated Domain Group (BRIDG) Model,Informatique de santé — Modèle d'information — Modèle de groupe de domaine intégré de recherche biomédicale (BRIDG),2015-09-17,1,['35.240.80'],ISO/TC 215,9599,,[83433],['en'],8,"<p>ISO 14199:2015 defines a set of models collectively referred to as the Biomedical Research Integrated Domain Group (BRIDG) model for use in supporting development of computer software, databases, metadata repositories, and data interchange standards. It supports technology solutions that enable semantic (meaning-based) interoperability within the biomedical/clinical research arena and betwee

6007,IS,,ISO 1420:1978,Rubber or plastics coated fabric — Determination of resistance to penetration by water,Supports textiles revêtus de caoutchouc ou de plastique — Détermination de la résistance à la pénétration de l'eau,1978-09-01,1,['59.080.40'],ISO/TC 45,9599,,[6008],"['en','fr']",3,

6008,IS,,ISO 1420:1987,Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water,Supports textiles revêtus de caoutchouc ou de plastique — Détermination de la résistance à la pénétration de l'eau,1987-11-05,2,['59.080.40'],ISO/TC 45/SC 4,9599,[6007],[30359],"['en','fr']",5,<p>For determining the degree of penetration by water test pieces cut from coated fabrics are subjet to known hydrostatic pressures. Tests may be conducted on the coated fabric as received or on test pieces which have been subjected to ageing or other tests. Time intervals between manufacturing and testing are given. Constitutes technical revision of the first edition (ISO 1420:1978)</p> 6009

30359,IS,,ISO 1420:2001,Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water,Supports textiles revêtus de caoutchouc ou de plastique — Détermination de la résistance à la pénétration de l'eau,2001-07-19,3,['59.080.40'],ISO/TC 45/SC 4,9599,[6008],[61707],['en'],3,

54506,IS,,ISO 14200:2012,Space environment (natural and artificial) — Guide to process-based implementation of meteoroid and debris environmental models (orbital altitudes below GEO + 2 000 km),Environnement spatial (naturel et artificiel) — Lignes directrices pour une mise en oeuvre fondée sur les processus des modèles environnementaux des météoroïdes et des débris (altitudes d'orbite inférieures à GEO + 2 000 km),2012-11-13,1,['49.140'],ISO/TC 20/SC 14,9599,,[77129],['en'],16,<p>This International Standard specifies the common implementation process for meteoroid and debris environment models for risk assessment of spacecraft and launch vehicle orbital stages. This International Standard g

6009,IS,,ISO 1421:1977,Fabrics coated with rubber or plastics — Determination of breaking strength and elongation at break,Supports textiles revêtus de caoutchouc ou de plastique — Détermination de la résistance à la rupture et de l'allongement à la rupture,1977-05-01,1,['59.080.40'],ISO/TC 45,9599,,[2146],"['en','fr']",2,

2146,IS,,ISO 1421:1998,Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break,Supports textiles revêtus de caoutchouc ou de plastique — Détermination de la force de rupture et de l'allongement à la rupture,1998-06-04,2,['59.080.40'],ISO/TC 45/SC 4,9599,[6009],[65588],"['en','fr']",11,

54507,IS,,ISO 14222:2013,Space environment (natural and artificial) — Earth upper atmosphere,Environnement spatial (naturel et artificiel) — Haute atmosphère terrestre,2013-09-16,1,['49.140'],ISO/TC 20/SC 14,9599,,[77492],"['en','ru']",38,"<p>ISO 14222:2013 specifies the structure of Earth's atmosphere above 120 km, provides accepted empirical models that can specify the details of the atmosphere, and uses annexes to describe the details of those models. Its purpose is to create a standard method for specifying Earth atmosphere properties (densities, etc.) in the low Earth orbit regime for space systems and materials users.</p>"

33405,IS,,ISO 14223-1:2003,Radiofrequency identification of animals — Advanced transponders — Part 1: Air interface,Identification des animaux par radiofréquence — Transpondeurs évolués — Partie 1: Interface hertzienne,2003-07-09,1,"['65.020.30','35.240.99']",ISO/TC 23/SC 19,9599,,[50979],"['en','fr']",17,<p>ISO 14223:2003 specifies the air interface between the transceiver and the advanced transponder used in the radiofrequency identification of animals under the condition of full upward compatibility according to ISO 11784 and ISO 11785. </p>

23088,IS,,ISO 14224:1999,Petroleum and natural gas industries — Collection and exchange of reliability and maintenance data for equipment,Industries du pétrole et du gaz naturel — Recueil et échange de données de fiabilité et de maintenance des équipements,1999-08-12,1,"['75.200','75.180.01']",ISO/TC 67,9599,,[36979],"['en','fr']",71,

36979,IS,,ISO 14224:2006,"Petroleum, petrochemical and natural gas industries — Collection and exchange of reliability and maintenance data for equipment","Industries du pétrole, de la pétrochimie et du gaz naturel — Recueil et échange de données de fiabilité et de maintenance des équipements",2006-12-08,2,"['75.200','75.180.01']",ISO/TC 67,9599,[23088],[64076],"['en','fr']",170,"<p>ISO 14224:2006 provides a comprehensive basis for the collection of reliability and maintenance (RM) data in a standard format for equipment in all facilities and operations within the petroleum, natural gas and petrochemical industries during the operational life cycle of equipment. It describes data-collection

45293,IS,,ISO 14229-1:2006,Road vehicles — Unified diagnostic services (UDS) — Part 1: Specification and requirements,Véhicules routiers — Services de diagnostic unifiés (SDU) — Partie 1: Spécification et exigences,2006-11-28,1,['43.180'],ISO/TC 22,9599,[23918],[55283],['en'],293,"<p>ISO 14229:2006 specifies data link independent requirements of diagnostic services, which allow a diagnostic tester (client) to control diagnostic functions in an on-vehicle Electronic Control Unit (server) such as an electronic fuel injection, automatic gear box, anti-lock braking system, etc. connected on a serial data link embedded in a road vehicle. It specifies generic services, which allow the diagnostic t

55283,IS,,ISO 14229-1:2013,Road vehicles — Unified diagnostic services (UDS) — Part 1: Specification and requirements,Véhicules routiers — Services de diagnostic unifiés (SDU) — Partie 1: Spécification et exigences,2013-03-15,2,['43.180'],ISO/TC 22/SC 31,9599,[45293],[72439],['en'],392,"<p>ISO 14229-1:2013 specifies data link independent requirements of diagnostic services, which allow a diagnostic tester (client) to control diagnostic functions in an on-vehicle Electronic Control Unit (ECU, server) such as an electronic fuel injection, automatic gear box, anti-lock braking system, etc. connected to a serial data link embedded in a road vehicle. </p><p>It specifies generic services, which al

72439,IS,,ISO 14229-1:2020,Road vehicles — Unified diagnostic services (UDS) — Part 1: Application layer,Véhicules routiers — Services de diagnostic unifiés (SDU) — Partie 1: Couche application,2020-02-07,3,['43.180'],ISO/TC 22/SC 31,9599,[55283],[87962],['en'],466,"<p>This document specifies data link independent requirements of diagnostic services, which allow a diagnostic tester (client) to control diagnostic functions in an on-vehicle electronic control unit (ECU, server) such as an electronic fuel injection, automatic gearbox, anti-lock braking system, etc. connected to a serial data link embedded in a road vehicle.</p><p>It specifies generic services, which allow the diagnostic tester

81380,IS,Amd,ISO 14229-1:2020/Amd 1:2022,Road vehicles — Unified diagnostic services (UDS) — Part 1: Application layer — Amendment 1,Véhicules routiers — Services de diagnostic unifiés (SDU) — Partie 1: Couche application — Amendement 1,2022-10-25,3,['43.180'],ISO/TC 22/SC 31,9599,,[87962],['en'],10,

23918,IS,,ISO 14229:1998,Road vehicles — Diagnostic systems — Diagnostic services specification,Véhicules routiers — Systèmes de diagnostic — Spécification des services de diagnostic,1998-07-16,1,['43.180'],ISO/TC 22,9599,,"[45293,37021,39505]","['en','fr']",50,

45763,IS,,ISO 14229-2:2013,Road vehicles — Unified diagnostic services (UDS) — Part 2: Session layer services,Véhicules routiers — Services de diagnostic unifiés (SDU) — Partie 2: Séquence des couches de services,2013-02-21,1,['43.180'],ISO/TC 22/SC 31,9599,,[77322],['en'],48,"<p>ISO 14229-2:2013 specifies data link independent requirements of session layer services. </p><p>ISO 14229-2:2013 specifies common session layer services to provide independence between unified diagnostic services (ISO 14229-1) and all transport protocols and network layer services (e.g. ISO 15765-2 DoCAN, ISO 10681-2 communication on FlexRay, ISO 13400 DoIP, ISO 14230-2 DoK-Line, etc.)</p><p>ISO 14229-2:2013 specifi

55284,IS,,ISO 14229-3:2012,Road vehicles — Unified diagnostic services (UDS) — Part 3: Unified diagnostic services on CAN implementation (UDSonCAN),Véhicules routiers — Services de diagnostic unifiés (SDU) — Partie 3: SDU sur l'implémentation du gestionnaire de réseau de communication (SDUsurCAN),2012-11-30,1,['43.180'],ISO/TC 22/SC 31,9599,[33618],[77323],['en'],16,<p>ISO 14229-3:2012 specifies the implementation of a common set of unified diagnostic services (UDS) on controller area networks (CAN) in road vehicles (UDSonCAN).</p><p>It references ISO 14229-1 and ISO 14229-2 and specifies implementation requirements of the diagnostic services to be used for diagnostic communication over CAN.

55287,IS,,ISO 14229-5:2013,Road vehicles — Unified diagnostic services (UDS) — Part 5: Unified diagnostic services on Internet Protocol implementation (UDSonIP),Véhicules routiers — Services de diagnostic unifiés (SDU) — Partie 5: SDU sur l'implémentation du protocol internet (SDUsurPI),2013-10-30,1,['43.180'],ISO/TC 22/SC 31,9599,,[76882],['en'],15,"<p>ISO 14229-5:2013 references ISO 14229-1 and ISO 14229-2 and specifies the implementation requirements of a common set of unified diagnostic services (UDS) on Internet Protocol (UDSonIP).</p><p>ISO 14229-5:2013 does not include any redundant information of the documents as listed in the introduction. It focuses on additional requirements speci

61221,IS,,ISO 14229-7:2015,Road vehicles — Unified diagnostic services (UDS) — Part 7: UDS on local interconnect network (UDSonLIN),Véhicules routiers — Services de diagnostic unifiés (SDU) — Partie 7: SDU sur l'implémentation LIN (SDUsurLIN),2015-01-31,1,['43.180'],ISO/TC 22/SC 31,9599,,[81381],['en'],14,"<p>ISO 14229-7:2015 specifies the implementation of a common set of unified diagnostic services (UDS) on UART-based local interconnect networks in road vehicles. The UDSonLIN diagnostics defines methods to implement diagnostic data transfer between a client and the LIN slave nodes through the LIN master node.</p><p>LIN slave nodes support three different diagnostic classes as defined in IS

23919,IS,,ISO 14230-1:1999,Road vehicles — Diagnostic systems — Keyword Protocol 2000 — Part 1: Physical layer,Véhicules routiers — Systèmes de diagnostic — Protocole 'Keyword 2000' — Partie 1: Couche physique,1999-03-18,1,['43.180'],ISO/TC 22/SC 31,9599,,[55591],"['en','fr']",7,

23920,IS,,ISO 14230-2:1999,Road vehicles — Diagnostic systems — Keyword Protocol 2000 — Part 2: Data link layer,Véhicules routiers — Systèmes de diagnostic — Protocole 'Keyword 2000' — Partie 2: Couche de liaison de données,1999-03-18,1,['43.180'],ISO/TC 22/SC 31,9599,,[55592],"['en','fr']",28,

55592,IS,,ISO 14230-2:2013,Road vehicles — Diagnostic communication over K-Line (DoK-Line) — Part 2: Data link layer,Véhicules routiers — Communication de diagnostic sur la ligne K (DoK-Line) — Partie 2: Couche de liaison de données,2013-03-15,2,['43.180'],ISO/TC 22/SC 31,9599,[23920],[69115],['en'],51,"<div id='MathJax_Message' style='display: none;'></div><!-- saved from url=(0124)file://\\\\netapp2240-2.iso.ch\\StandData\\Documents\\TC022\\SC003\\055592 - ISO_NP 14230-2 (Ed 2)\\60.00\\300\\C055592e Abstract.html --><p></p><p>ISO 14230-2:2013 specifies data link layer services tailored to meet the requirements of UART-based vehicle communication systems on K-Line as specified in ISO 14230

23094,IS,,ISO 14232:2000,Thermal spraying — Powders — Composition and technical supply conditions,Projection thermique — Poudres — Composition et conditions techniques de livraison,2000-06-01,1,['25.220.20'],ISO/TC 107,9599,,"[63668,63667]","['en','fr']",17,

23941,IS,,ISO 14236:2000,Plastics pipes and fittings — Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems,Tubes et raccords en matières plastiques — Raccords mécaniques à joint de compression utilisés avec les tubes pression en polyéthylène dans les systèmes d'adduction d'eau,2000-03-23,1,"['23.040.45','23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[60932],"['en','fr']",16,

23942,IS,,ISO 14237:2000,Surface chemical analysis — Secondary-ion mass spectrometry — Determination of boron atomic concentration in silicon using uniformly doped materials,Analyse chimique des surfaces — Méthode par spectrométrie de masse des ions secondaires — Dosage des atomes de bore dans le silicium à l'aide de matériaux dopés uniformément,2000-02-03,1,['71.040.40'],ISO/TC 201/SC 6,9599,,[44882],['en'],22,

23950,IS,,ISO 14238:1997,Soil quality — Biological methods — Determination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes,"Qualité du sol — Méthodes biologiques — Détermination de la minéralisation de l'azote et de la nitrification dans les sols, et de l'influence des produits chimiques sur ces processus",1997-02-13,1,['13.080.30'],ISO/TC 190/SC 4,9599,,[56033],"['en','fr']",11,<p>Specifies laboratory procedures for measuring the mineralization and nitrification of nitrogen by the soil microflora. Gives a simple procedure for investigation of the potential toxicity of chemicals to N-mineralization in soils.</p>

21531,IS,,ISO 14239:1997,Soil quality — Laboratory incubation systems for measuring the mineralization of organic chemicals in soil under aerobic conditions,"Qualité du sol — Méthodes de mesure de la minéralisation de produits chimiques organiques dans le sol sous conditions aérobies, au moyen de systèmes d'incubation de laboratoire",1997-06-05,1,['13.080.30'],ISO/TC 190/SC 4,9599,,[69583],['en'],16,

23257,IS,,ISO 14242-1:2002,Implants for surgery — Wear of total hip-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test,Implants chirurgicaux — Usure des prothèses totales de l'articulation de la hanche — Partie 1: Paramètres de charge et de déplacement pour machines d'essai d'usure et conditions environnementales correspondantes d'essai,2002-03-07,1,['11.040.40'],ISO/TC 150/SC 4,9599,,[52679],"['en','fr']",8,"<p>This part of ISO 14242 specifies the relative angular movement between articulating components, the pattern of the applied force, speed and duration of testing, sample configuration and test env

52679,IS,,ISO 14242-1:2012,Implants for surgery — Wear of total hip-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test,Implants chirurgicaux — Usure des prothèses totales de l'articulation de la hanche — Partie 1: Paramètres de charge et de déplacement pour machines d'essai d'usure et conditions environnementales correspondantes d'essai,2012-01-06,2,['11.040.40'],ISO/TC 150/SC 4,9599,[23257],[63073],"['en','fr']",9,"<p>ISO 14242-1:2012 specifies the relative angular movement between articulating components, the pattern of the applied force, the speed and duration of testing, the sample configuration and

25376,IS,,ISO 14242-2:2000,Implants for surgery — Wear of total hip-joint prostheses — Part 2: Methods of measurement,Implants chirurgicaux — Usure des prothèses totales de l'articulation de la hanche — Partie 2: Méthodes de mesurage,2000-10-05,1,['11.040.40'],ISO/TC 150/SC 4,9599,,[70668],"['en','fr']",5,

23256,IS,,ISO 14243-1:2002,Implants for surgery — Wear of total knee-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test,Implants chirurgicaux — Usure des prothèses totales de l'articulation du genou — Partie 1: Paramètres de charge et de déplacement pour machines d'essai d'usure avec contrôle de la charge et des conditions environnementales correspondantes d'essai,2002-03-21,1,['11.040.40'],ISO/TC 150/SC 4,9599,,"[44262,39736]","['en','fr']",13,"<p>This part of ISO 14243 specifies the relative angular movement between articulating components, the pattern of the applied force, speed and

25377,IS,,ISO 14243-2:2000,Implants for surgery — Wear of total knee-joint prostheses — Part 2: Methods of measurement,Implants chirurgicaux — Usure des prothèses totales de l'articulation du genou — Partie 2: Méthodes de mesurage,2000-10-26,1,['11.040.40'],ISO/TC 150/SC 4,9599,,"[43531,44263]","['en','fr']",5,

44263,IS,,ISO 14243-2:2009,Implants for surgery — Wear of total knee-joint prostheses — Part 2: Methods of measurement,Implants chirurgicaux — Usure des prothèses totales de l'articulation du genou — Partie 2: Méthodes de mesure,2009-11-10,2,['11.040.40'],ISO/TC 150/SC 4,9599,[25377],[69851],"['en','fr','ru']",4,<p>ISO 14243-2:2009 specifies a method of assessment of wear of the tibial component of total knee-joint prostheses using the gravimetric technique for components tested in accordance with ISO 14243-1.</p>