Withdrawn and superseded ISO standards — page 40 of 246

31756,IS,,ISO 140-14:2004,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 14: Guidelines for special situations in the field,Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 14: Lignes directrices pour des situations particulières in situ,2004-08-10,1,['91.120.20'],ISO/TC 43/SC 2,9599,,"[59747,55997]","['en','fr']",31,"<p>ISO 140-14:2004 concerns field measurements of airborne sound insulation and impact sound insulation, and is to be used as a supplement to ISO 140-4 and ISO 140-7. It contains guidelines on sound insulation measurements in special situations in the field not directly covered by IS

45538,IS,Cor,ISO 140-14:2004/Cor 1:2007,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 14: Guidelines for special situations in the field — Technical Corrigendum 1,Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 14: Lignes directrices pour des situations particulières in situ — Rectificatif technique 1,2007-02-08,1,['91.120.20'],ISO/TC 43/SC 2,9599,[29067],"[55997,59747]","['en','fr']",1,

43822,IS,,ISO 140-16:2006,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 16: Laboratory measurement of the sound reduction index improvement by additional lining,Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 16: Mesurage en laboratoire de l'amélioration de l'indice de réduction acoustique par un revêtement complémentaire,2006-08-09,1,['91.120.20'],ISO/TC 43/SC 2,9599,,"[42090,42087,42088,42092,42089]",['en'],13,"<p>ISO 140-16:2006, as a complement to ISO 140-3, specifies the laboratory measurement of the improvement of the sound-reduction index of a wall or ceiling when covered by an additional

40237,IS,,ISO 140-18:2006,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 18: Laboratory measurement of sound generated by rainfall on building elements,Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 18: Mesurage en laboratoire du bruit produit par la pluie sur les éléments de construction,2006-11-20,1,['91.120.20'],ISO/TC 43/SC 2,9599,,"[55996,55995]","['en','fr']",16,"<p>ISO 140-18:2006 specifies a laboratory method of measurement of the impact sound insulation of roofs, roof/ceiling systems and skylights excited by artificial rainfall. The results obtained can be used for assessing the noise t

3955,IS,,ISO 140-2:1978,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 2: Statement of precision requirements,Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 2: Spécifications relatives à la fidélité,1978-07-01,1,['91.120.20'],ISO/TC 43,9599,,[3956],"['en','fr']",5,

3956,IS,,ISO 140-2:1991,"Acoustics — Measurement of sound insulation in buildings and of building elements — Part 2: Determination, verification and application of precision data","Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 2: Détermination, vérification et application des données de fidélité",1991-06-20,2,['91.120.20'],ISO/TC 43/SC 2,9599,[3955],[36492],"['en','fr']",13,

22857,IS,Cor,ISO 140-2:1991/Cor 1:1993,"Acoustics — Measurement of sound insulation in buildings and of building elements — Part 2: Determination, verification and application of precision data — Technical Corrigendum 1","Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 2: Détermination, vérification et application des données de fidélité — Rectificatif technique 1",1993-10-21,2,['91.120.20'],ISO/TC 43/SC 2,9599,,[36492],"['en','fr']",1,<p>Replaces 'r' by 'R' in equation (5).</p>

3957,IS,,ISO 140-3:1978,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements,Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 3: Mesurage en laboratoire de l'isolation aux bruits aériens des éléments de construction,1978-07-01,1,['91.120.20'],ISO/TC 43,9599,,[3958],"['en','fr']",5,

3958,IS,,ISO 140-3:1995,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements,Acoustique — Mesurage de l'isolement acoustique des immeubles et des éléments de construction — Partie 3: Mesurage en laboratoire de l'affaiblissement des bruits aériens par les éléments de construction,1995-05-11,2,['91.120.20'],ISO/TC 43/SC 2,9599,[3957],"[42090,42087,42088,42092,42089]","['en','fr']",20,"<p>Cancels and replaces the first edition (1978) and its amendment (1990). Specifies a laboratory method of measuring the airborne sound insulation of building elements such as walls, floors, doors, wi

34246,IS,Amd,ISO 140-3:1995/Amd 1:2004,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements — Amendment 1: Installation guidelines for lightweight twin leaf partitions,Acoustique — Mesurage de l'isolement acoustique des immeubles et des éléments de construction — Partie 3: Mesurage en laboratoire de l'affaiblissement des bruits aériens par les éléments de construction — Amendement 1: Conditions particulières de montage des cloisons à doubles parements légers,2004-12-01,2,['91.120.20'],ISO/TC 43/SC 2,9599,,"[42090,42087,42088,42092,42089]",['en'],1,

3960,IS,,ISO 140-4:1978,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 4: Field measurements of airborne sound insulation between rooms,Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 4: Mesurage sur place de l'isolation aux bruits aériens entre les pièces,1978-07-01,1,['91.120.20'],ISO/TC 43,9599,,[2210],"['en','fr']",5,

2210,IS,,ISO 140-4:1998,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 4: Field measurements of airborne sound insulation between rooms,Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 4: Mesurage in situ de l'isolement aux bruits aériens entre les pièces,1998-08-20,2,['91.120.20'],ISO/TC 43/SC 2,9599,[3960],[55997],"['en','fr']",24,

3961,IS,,ISO 140-5:1978,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 5: Field measurements of airborne sound insulation of facade elements and facades,Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 5: Mesurage sur place de l'isolation aux bruits aériens des éléments de façade et des façades,1978-07-01,1,"['91.120.20','91.060.10']",ISO/TC 43,9599,,[2246],"['en','fr']",8,

2246,IS,,ISO 140-5:1998,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 5: Field measurements of airborne sound insulation of façade elements and façades,Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 5: Mesurages in situ de la transmission des bruits aériens par les éléments de façade et les façades,1998-08-27,2,"['91.120.20','91.060.10']",ISO/TC 43/SC 2,9599,[3961],"[55997,59748]","['en','fr']",24,

3962,IS,,ISO 140-6:1978,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 6: Laboratory measurements of impact sound insulation of floors,Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 6: Mesurage en laboratoire de l'isolation des sols aux bruits de chocs,1978-07-01,1,"['91.060.30','91.120.20']",ISO/TC 43,9599,,[2306],"['en','fr']",5,

2306,IS,,ISO 140-6:1998,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 6: Laboratory measurements of impact sound insulation of floors,Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 6: Mesurage en laboratoire de la transmission des bruits de choc par les planchers,1998-08-27,2,"['91.060.30','91.120.20']",ISO/TC 43/SC 2,9599,[3962],"[42090,42087,42088,42092,42089]","['en','fr']",15,

3963,IS,,ISO 140-7:1978,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 7: Field measurements of impact sound insulation of floors,Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 7: Mesurage sur place de l'isolation des sols aux bruits de chocs,1978-07-01,1,"['91.060.30','91.120.20']",ISO/TC 43,9599,,[2338],"['en','fr']",5,

2338,IS,,ISO 140-7:1998,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 7: Field measurements of impact sound insulation of floors,Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 7: Mesurage in situ de la transmission des bruits de choc par les planchers,1998-09-03,2,"['91.060.30','91.120.20']",ISO/TC 43/SC 2,9599,[3963],"[55997,59747]","['en','fr']",17,

3964,IS,,ISO 140-8:1978,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a standard floor,Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 8: Mesurage en laboratoire de la réduction de la transmission des bruits de chocs par les revêtements de sol sur plancher normalisé,1978-07-01,1,"['91.060.30','91.120.20']",ISO/TC 43,9599,,[2322],"['en','fr']",7,

2322,IS,,ISO 140-8:1997,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor,Acoustique — Mesurage de l'isolement acoustique des immeubles et des éléments de construction — Partie 8: Mesurages en laboratoire de la réduction de la transmission du bruit de choc par les revêtements de sol sur un plancher lourd normalisé,1997-10-16,2,"['91.060.30','91.120.20']",ISO/TC 43/SC 2,9599,[3964],"[42090,42087,42088,42092,42089]","['en','fr']",14,

3965,IS,,ISO 140-9:1985,Acoustics — Measurements of sound insulation in buildings and of building elements — Part 9: Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it,Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 9: Mesurage en laboratoire de l'isolation au bruit aérien de pièce à pièce par un plafond suspendu surmonté d'un vide d'air,1985-02-14,1,"['91.060.30','91.120.20']",ISO/TC 43/SC 2,9599,,[35004],"['en','fr']",6,<p>Specifies a method for measuring a quantity called the suspended ceiling normalized level difference when the sound transmitted by paths other than the requ

5986,IS,,ISO 1400:1975,Vulcanized rubbers of high hardness (85 to 100 IRHD) — Determination of hardness,Caoutchoucs vulcanisés de haute dureté (85 à 100 D.I.D.C) — Détermination de la dureté,1975-05-01,1,['83.060'],ISO/TC 45/SC 2,9599,,[3683],"['en','fr']",4,

23142,IS,,ISO 14001:1996,Environmental management systems — Specification with guidance for use,Systèmes de management environnemental — Spécification et lignes directrices pour son utilisation,1996-08-29,1,"['13.020.10','03.100.70']",ISO/TC 207/SC 1,9599,,[31807],"['en','es','fr']",14,"<p>This document specifies requirements for an environmental management system, to enable an organization to formulate a policy and objectives taking into account legislative requirements and information about si

31807,IS,,ISO 14001:2004,Environmental management systems — Requirements with guidance for use,Systèmes de management environnemental — Exigences et lignes directrices pour son utilisation,2004-11-15,2,"['13.020.10','03.100.70']",ISO/TC 207/SC 1,9599,[23142],[60857],"['ar','en','es','fr','ru']",23,"<p>ISO 14001:2004 specifies requirements for an environmental management system to enable an organization to develop and implement a policy and objectives which take into account legal requirements an

54536,IS,Cor,ISO 14001:2004/Cor 1:2009,Environmental management systems — Requirements with guidance for use — Technical Corrigendum 1,Systèmes de management environnemental — Exigences et lignes directrices pour son utilisation — Rectificatif technique 1,2009-07-17,2,"['13.020.10','03.100.70']",ISO/TC 207/SC 1,9599,,[60857],"['en','es','fr','ru']",6,

60857,IS,,ISO 14001:2015,Environmental management systems — Requirements with guidance for use,Systèmes de management environnemental — Exigences et lignes directrices pour son utilisation,2015-09-14,3,"['13.020.10','03.100.70']",ISO/TC 207/SC 1,9599,"[31807,54536]",[92300],"['ar','en','es','fr']",35,"<p>ISO 14001:2015 specifies the requirements for an environmental management system that an organization can use to enhance its environmental performance. ISO 14001:2015 is intended for use by an o

88209,IS,Amd,ISO 14001:2015/Amd 1:2024,Environmental management systems — Requirements with guidance for use — Amendment 1: Climate action changes,Systèmes de management environnemental — Exigences et lignes directrices pour son utilisation — Amendement 1: Changements concernant les actions en lien avec le climat,2024-02-23,3,"['13.020.10','03.100.70']",ISO/TC 207/SC 1,9599,,[92300],"['en','es','fr']",1,

26258,IS,,ISO 14004:1996,"Environmental management systems — General guidelines on principles, systems and supporting techniques","Systèmes de management environnemental — Lignes directrices générales concernant les principes, les systèmes et les techniques de mise en oeuvre",1996-08-29,1,"['13.020.10','03.100.70']",ISO/TC 207/SC 1,9599,,[31808],"['en','fr']",31,"<p>Contains guidelines on the development and implementation of environmental management systems and principles, and their coordinatio

31808,IS,,ISO 14004:2004,"Environmental management systems — General guidelines on principles, systems and support techniques","Systèmes de management environnemental — Lignes directrices générales concernant les principes, les systèmes et les techniques de mise en oeuvre",2004-11-15,2,"['13.020.10','03.100.70']",ISO/TC 207/SC 1,9599,[26258],[60856],"['ar','en','es','fr','ru']",39,"<p>ISO 14004:2004 provides guidance on the establishment, implementation, maintenance and improvement of an environ

43208,IS,,ISO 14005:2010,"Environmental management systems — Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation","Systèmes de management environnemental — Lignes directrices pour la mise en application par phases d'un système de management environnemental, incluant l'utilisation d'une évaluation de performance environnementale",2010-12-13,1,"['13.020.10','03.100.70']",ISO/TC 207/SC 1,9599,,[72333],"['ar','en','es','fr','ru']",70,"<p>ISO 14005:2010 provides guidance for all organizations, but particularly small- and medium-sized enterprises, on the phased development, implementation, maintenance and improve

43241,IS,,ISO 14006:2011,Environmental management systems — Guidelines for incorporating ecodesign,Systèmes de management environnemental — Lignes directrices pour intégrer l'éco-conception,2011-07-08,1,"['13.020.10','03.100.70']",ISO/TC 207/SC 1,9599,,[72644],"['ar','en','es','fr','ru']",30,"<p>ISO 14006:2011 provides guidelines to assist organizations in establishing, documenting, implementing, maintaining and continually improving their management of ecodesign as part of an environmental management system (EMS).</p><p>ISO 14006:2011 is intended to be used by those organizations that have implemented an EMS in accordance with ISO 14001, but can help in integrating ecodesign in other manage

5988,IS,,ISO 1401:1987,Rubber hoses for agricultural spraying,Tuyaux en caoutchouc pour pulvérisation agricole,1987-10-15,1,"['83.140.40','65.060.40']",ISO/TC 45/SC 1,9599,[5987],[21871],"['en','fr']",2,

21871,IS,,ISO 1401:1999,Rubber hoses for agricultural spraying,Tuyaux en caoutchouc pour pulvérisation agricole,1999-12-02,2,"['83.140.40','65.060.40','65.060.25']",ISO/TC 45/SC 1,9599,[5988],[68033],"['en','fr']",4,

23156,IS,,ISO 14010:1996,Guidelines for environmental auditing — General principles,Lignes directrices pour l'audit environnemental — Principes généraux,1996-10-03,1,['13.020.10'],ISO/TC 207/SC 2,9599,,[31169],"['en','fr']",4,

23157,IS,,ISO 14011:1996,Guidelines for environmental auditing — Audit procedures — Auditing of environmental management systems,Lignes directrices pour l'audit environnemental — Procédures d'audit — Audit des systèmes de management environnemental,1996-10-03,1,['13.020.10'],ISO/TC 207/SC 2,9599,,[31169],"['en','fr']",6,

23162,IS,,ISO 14012:1996,Guidelines for environmental auditing — Qualification criteria for environmental auditors,Lignes directrices pour l'audit environnemental — Critères de qualification pour les auditeurs environnementaux,1996-10-03,1,"['13.020.10','03.100.30']",ISO/TC 207/SC 2,9599,,[31169],"['en','fr']",6,

23164,IS,,ISO 14015:2001,Environmental management — Environmental assessment of sites and organizations (EASO),Management environnemental — Évaluation environnementale de sites et d'organismes (EESO),2001-11-15,1,['13.020.10'],ISO/TC 207/SC 2,9599,,[78014],"['ar','en','es','fr','ru']",19,

5989,IS,,ISO 1402:1974,Rubber hose — Hydrostatic testing,Tuyaux en élastomères — Essais hydrostatiques,1974-07-01,1,['23.040.70'],ISO/TC 45,9599,,"[5990,5991]","['en','fr']",3,

5990,IS,,ISO 1402:1984,Rubber and plastics hoses and hose assemblies — Hydrostatic testing,Tuyaux et flexibles en caoutchouc et en plastique — Essais hydrostatiques,1984-12-01,2,['23.040.70'],ISO/TC 45/SC 1,9599,[5989],[5991],"['en','fr']",4,

5991,IS,,ISO 1402:1994,Rubber and plastics hoses and hose assemblies — Hydrostatic testing,Tuyaux et flexibles en caoutchouc et en plastique — Essais hydrostatiques,1994-11-24,3,['23.040.70'],ISO/TC 45/SC 1,9599,"[5990,5989]",[45391],"['en','fr']",5,"<p>Cancels and replaces the second edition (1984). Specifies methods for the hydrostatic testing of rubber and plastics hoses and hose assemblies, including methods for the determination of dimensional stability.</p>"

45391,IS,,ISO 1402:2009,Rubber and plastics hoses and hose assemblies — Hydrostatic testing,Tuyaux et flexibles en caoutchouc et en plastique — Essais hydrostatiques,2009-10-09,4,['23.040.70'],ISO/TC 45/SC 1,9599,[5991],[80488],"['en','fr','ru']",8,"<p>ISO 1402:2009 specifies methods for the hydrostatic testing of rubber and plastics hoses and hose assemblies, including methods for the determination of dimensional stability.</p>"

24313,IS,,ISO 14020:1998,Environmental labels and declarations — General principles,Étiquettes et déclarations environnementales — Principes généraux,1998-08-06,1,['13.020.50'],ISO/TC 207/SC 3,9599,,[34425],"['en','fr']",5,

34425,IS,,ISO 14020:2000,Environmental labels and declarations — General principles,Étiquettes et déclarations environnementales — Principes généraux,2000-09-28,2,['13.020.50'],ISO/TC 207/SC 3,9599,"[24313,32960]",[79479],"['ar','en','es','fr','ru']",5,"<p>This International Standard establishes guiding principles for the development and use of environmental labels and declarations. It is intended that other applicable standards in the ISO 14020 series be used in conjunction with this International Standard. </p><p>This International Standard is not intended for use as a specification for certification and registration purposes.</p><p>NOTE Other International Standards in the series are inte

23146,IS,,ISO 14021:1999,Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling),Marquage et déclarations environnementaux — Autodéclarations environnementales (Étiquetage de type II),1999-09-16,1,['13.020.50'],ISO/TC 207/SC 3,9599,,[66652],"['ar','en','es','fr','ru']",23,

52530,IS,Amd,ISO 14021:1999/Amd 1:2011,Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) — Amendment 1,Marquage et déclarations environnementaux — Autodéclarations environnementales (Étiquetage de type II) — Amendement 1,2011-12-13,1,['13.020.50'],ISO/TC 207/SC 3,9599,,[66652],"['en','es','fr','ru']",5,

66652,IS,,ISO 14021:2016,Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling),Marquage et déclarations environnementaux — Autodéclarations environnementales (Étiquetage de type II),2016-03-14,2,['13.020.50'],ISO/TC 207/SC 3,9599,"[52530,23146]","[79526,87608]","['en','es','fr']",27,"<p>ISO 14021:2016 specifies requirements for self-declared environmental claims, including statements, symbols and graphics, regarding products. It further describes selected terms commonly used in environmental claims and gives qualifications for their use. This International Standard also describes a general evaluation and verification methodology for self

81242,IS,Amd,ISO 14021:2016/Amd 1:2021,"Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) — Amendment 1: Carbon footprint, carbon neutral","Marquage et déclarations environnementaux — Autodéclarations environnementales (Étiquetage de type II) — Amendement 1: Empreinte carbone, neutre en carbone",2021-07-13,2,['13.020.50'],ISO/TC 207/SC 3,9599,,[87608],"['en','es','fr']",3,

23145,IS,,ISO 14024:1999,Environmental labels and declarations — Type I environmental labelling — Principles and procedures,Marquage et déclarations environnementaux — Étiquetage environnemental de type I — Principes et méthodes,1999-03-25,1,['13.020.50'],ISO/TC 207/SC 3,9599,,[72458],"['ar','en','es','fr','ru']",12,

72458,IS,,ISO 14024:2018,Environmental labels and declarations — Type I environmental labelling — Principles and procedures,Labels et déclarations environnementaux — Délivrance du label environnemental de type I — Principes et procédures,2018-02-21,2,['13.020.50'],ISO/TC 207/SC 3,9599,[23145],[87609],"['en','es','fr']",14,"<p>ISO 14024:2018 establishes the principles and procedures for developing Type I environmental labelling programmes, including the selection of product categories, product environmental criteria and product function characteristics, and for assessing and demonstrating compliance. ISO 14024:2018 also establishes the certification procedures for awarding the label.</p>" 724

38131,IS,,ISO 14025:2006,Environmental labels and declarations — Type III environmental declarations — Principles and procedures,Marquages et déclarations environnementaux — Déclarations environnementales de Type III — Principes et modes opératoires,2006-06-30,1,['13.020.50'],ISO/TC 207/SC 3,9599,[26956],[87610],"['en','es','fr','ru']",25,"<p>ISO 14025:2006 establishes the principles and specifies the procedures for developing Type III environmental declaration programmes and Type III environmental declarations. It specifically establishes the use of the ISO 14040 series of standards in the development of Type III environmental declaration programmes and Type III environmental declarations.

5992,IS,,ISO 1403:1976,General purpose rubber water hose,Tuyaux à eau en caoutchouc pour usages généraux,1976-10-01,1,['23.040.70'],ISO/TC 45,9599,,"[5993,5994]","['en','fr']",2,

5993,IS,,ISO 1403:1986,"Rubber hoses for water, general purpose — Specification","Tuyaux en caoutchouc pour l'eau, à usages généraux — Spécifications",1986-06-12,2,['23.040.70'],ISO/TC 45/SC 1,9599,[5992],[5994],"['en','fr']",2,

5994,IS,,ISO 1403:1995,"Rubber hoses, textile-reinforced, for general-purpose water applications — Specification",Tuyaux en caoutchouc à armature textile d'usage général pour l'eau — Spécifications,1995-08-03,3,['23.040.70'],ISO/TC 45/SC 1,9599,"[5993,5992]",[37226],"['en','fr']",3,"<p>Specifies the requirements for three types of general-purpose textile-reinforced rubber water hose. Hoses shall not be used for conveyance of drinking water, for washing-machine inlets, as fire-fighting hose and for special agricultural machines. Cancels and replaces the second edition which has been technically revised.</p>"

37226,IS,,ISO 1403:2005,"Rubber hoses, textile-reinforced, for general-purpose water applications — Specification",Tuyaux en caoutchouc à armature textile d'usage général pour l'eau — Spécifications,2005-02-25,4,['23.040.70'],ISO/TC 45/SC 1,9599,[5994],[77507],"['en','fr']",4,"<p>ISO 1403:2005 specifies the requirements for three types of general-purpose textile-reinforced rubber water hose with an operating temperature range of -25 °C to +70 °C and a maximum working pressure of up to 25 bar.</p><p>These hoses are not intended to be used for conveyance of potable (drinking) water, for washing-machine inlets, as firefighting hoses, for special agricultural machines or as collapsible water hos

23149,IS,,ISO 14031:1999,Environmental management — Environmental performance evaluation — Guidelines,Management environnemental — Évaluation de la performance environnementale — Lignes directrices,1999-11-11,1,['13.020.10'],ISO/TC 207/SC 4,9599,,[52297],"['ar','en','es','fr','ru']",32,

52297,IS,,ISO 14031:2013,Environmental management — Environmental performance evaluation — Guidelines,Management environnemental — Évaluation de la performance environnementale — Lignes directrices,2013-07-25,2,['13.020.10'],ISO/TC 207/SC 4,9599,[23149],[81453],"['ar','en','es','fr','ru']",38,"<p>ISO 14031:2013 gives guidance on the design and use of environmental performance evaluation (EPE) within an organization. It is applicable to all organizations, regardless of type, size, location and complexity.</p><p>ISO 14031:2013 does not establish environmental performance levels.</p><p>The guidance in ISO 14031:2013 can be used to support an organization's own approach to EPE, including its com

23151,IS,,ISO 14040:1997,Environmental management — Life cycle assessment — Principles and framework,Management environnemental — Analyse du cycle de vie — Principes et cadre,1997-06-12,1,"['13.020.10','13.020.60']",ISO/TC 207/SC 5,9599,,"[37456,38498]","['en','fr']",12,

23152,IS,,ISO 14041:1998,Environmental management — Life cycle assessment — Goal and scope definition and inventory analysis,Management environnemental — Analyse du cycle de vie — Définition de l'objectif et du champ d'étude et analyse de l'inventaire,1998-10-01,1,"['13.020.10','13.020.60']",ISO/TC 207/SC 5,9599,,"[37456,38498]","['en','fr']",22,

23153,IS,,ISO 14042:2000,Environmental management — Life cycle assessment — Life cycle impact assessment,Management environnemental — Analyse du cycle de vie — Évaluation de l'impact du cycle de vie,2000-03-09,1,"['13.020.10','13.020.60']",ISO/TC 207/SC 5,9599,,"[37456,38498]","['en','fr']",16,

23154,IS,,ISO 14043:2000,Environmental management — Life cycle assessment — Life cycle interpretation,Management environnemental — Analyse du cycle de vie — Interprétation du cycle de vie,2000-03-09,1,"['13.020.10','13.020.60']",ISO/TC 207/SC 5,9599,,"[37456,38498]","['en','fr']",18,

23155,IS,,ISO 14050:1998,Environmental management — Vocabulary,Management environnemental — Vocabulaire,1998-05-07,1,"['13.020.10','01.040.13']",ISO/TC 207,9599,,[34796],"['en','fr']",9,

34796,IS,,ISO 14050:2002,Environmental management — Vocabulary,Management environnemental — Vocabulaire,2002-05-30,2,"['13.020.10','01.040.13']",ISO/TC 207,9599,"[23155,31025]",[41492],"['en','es','fr']",29,"<p>This International Standard contains definitions of fundamental concepts related to environmental management, published in the ISO 14000 family of International Standards.</p>"

41492,IS,,ISO 14050:2009,Environmental management — Vocabulary,Management environnemental — Vocabulaire,2009-02-09,3,"['13.020.10','01.040.13']",ISO/TC 207,9599,[34796],"[67317,75300]","['ar','en','es','fr','ru']",169,"<p>ISO 14050:2009 defines terms of fundamental concepts related to environmental management, published in the ISO 14000 series of International Standards.</p>"

34676,IS,,ISO 14063:2006,Environmental management — Environmental communication — Guidelines and examples,Management environnemental — Communication environnementale — Lignes directrices et exemples,2006-08-02,1,['13.020.10'],ISO/TC 207/SC 4,9599,,[72888],"['en','es','fr','ru']",27,"<p>ISO 14063:2006 gives guidance to an organization on general principles, policy, strategy and activities relating to both internal and external environmental communication. It utilizes proven and well-established approaches for communication, adapted to the specific conditions that exist in environmental communication. It is applicable to all organizations regardless of their size, type, location, structure, ac

38381,IS,,ISO 14064-1:2006,Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals,"Gaz à effet de serre — Partie 1: Spécifications et lignes directrices, au niveau des organismes, pour la quantification et la déclaration des émissions et des suppressions des gaz à effet de serre",2006-03-01,1,['13.020.40'],ISO/TC 207/SC 7,9599,,[66453],"['ar','en','es','fr','ru']",20,"<p>ISO 14064-1:2006 specifies principles and requirements at the organization level for quantification and reporting of greenhouse gas (GHG) emissions and removals. It includes requirements for the design, development, management

38382,IS,,ISO 14064-2:2006,"Greenhouse gases — Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements","Gaz à effet de serre — Partie 2: Spécifications et lignes directrices, au niveau des projets, pour la quantification, la surveillance et la déclaration des réductions d'émissions ou d'accroissements de suppressions des gaz à effet de serre",2006-03-01,1,['13.020.40'],ISO/TC 207/SC 7,9599,,[66454],"['ar','en','es','fr','ru']",28,"<p>ISO 14064-2:2006 specifies principles and requirements and provides guidance at the project level for quantification, monitoring and reporting of activit

38700,IS,,ISO 14064-3:2006,Greenhouse gases — Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions,Gaz à effet de serre — Partie 3: Spécifications et lignes directrices pour la validation et la vérification des déclarations des gaz à effet de serre,2006-03-01,1,['13.020.40'],ISO/TC 207/SC 7,9599,,[66455],"['ar','en','es','fr','ru']",34,"<p>ISO 14064-3:2006 specifies principles and requirements and provides guidance for those conducting or managing the validation and/or verification of greenhouse gas (GHG) assertions. It can be applied to organizational or GHG project quantification, including GHG quantification, monitoring and reporting carrie

40685,IS,,ISO 14065:2007,Greenhouse gases — Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition,Gaz à effet de serre — Exigences pour les organismes fournissant des validations et des vérifications des gaz à effet de serre en vue de l'accréditation ou d'autres formes de reconnaissance,2007-04-16,1,['13.020.40'],ISO/TC 207/SC 7,9599,,[60168],"['en','fr','ru']",24,"<p>ISO 14065:2007 specifies principles and requirements for bodies that undertake validation or verification of greenhouse gas (GHG) assertions. </p><p>It is GHG programme neutral. If a GHG programme is applicable, the requirements of that GHG programme are additi

60168,IS,,ISO 14065:2013,Greenhouse gases — Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition,Gaz à effet de serre — Exigences pour les organismes fournissant des validations et des vérifications des gaz à effet de serre en vue de l'accréditation ou d'autres formes de reconnaissance,2013-03-25,2,['13.020.40'],ISO/TC 207/SC 7,9599,[40685],[74257],"['ar','en','es','fr','ru']",27,<p>ISO 14065:2013 specifies principles and requirements for bodies that undertake validation or verification of greenhouse gas (GHG) assertions.</p>

43277,IS,,ISO 14066:2011,Greenhouse gases — Competence requirements for greenhouse gas validation teams and verification teams,Gaz à effet de serre — Exigences de compétence pour les équipes de validation et les équipes de vérification de gaz à effet de serre,2011-04-07,1,['13.020.40'],ISO/TC 207/SC 7,9599,,[82544],"['en','es','fr','ru']",25,"<p>ISO 14066:2011 specifies competence requirements for validation teams and verification teams. ISO 14066:2011 complements the implementation of ISO 14065.</p><p>ISO 14066:2011 is not linked to any particular greenhouse gas (GHG) programme. If a particular GHG programme is applicable, competence requirements of that GHG programme are additional to the

5996,IS,,ISO 1407:1976,Rubber — Determination of solvent extract,Caoutchouc — Détermination de l'extrait par les solvants,1976-10-01,1,['83.060'],ISO/TC 45,9599,,[5997],"['en','fr']",3,

5997,IS,,ISO 1407:1992,Rubber — Determination of solvent extract,Caoutchouc — Détermination de l'extrait par les solvants,1992-05-07,2,['83.060'],ISO/TC 45/SC 2,9599,[5996],[42242],"['en','fr']",8,"<p>Specifies two methods for the quantitative determination of extractable material from raw rubber, both natural and synthetic, and their unvulcanized and vulcanized compounds. Method B is a rapid extraction method, while method A is for use in cases of dispute.</p>"

45561,IS,Cor,ISO 1407:1992/Cor 1:2007,Rubber — Determination of solvent extract — Technical Corrigendum 1,Caoutchouc — Détermination de l'extrait par les solvants — Rectificatif technique 1,2007-02-02,2,['83.060'],ISO/TC 45/SC 2,9599,,[42242],"['en','fr']",2,

42242,IS,,ISO 1407:2009,Rubber — Determination of solvent extract,Caoutchouc — Détermination de l'extrait par les solvants,2009-06-18,3,['83.060'],ISO/TC 45/SC 2,9599,"[5997,45561]",[51794],"['en','fr']",13,"<p>ISO 1407:2009 specifies three methods for the quantitative determination of the material extractable from raw rubbers, both natural and synthetic, and their unvulcanized and vulcanized compounds.</p><ul><li>method A measures the mass of the solvent extract, after evaporation of the solvent, relative to the mass of the original test portion;</li><li>method B measures the difference in the mass of the test portion before and after extraction;</li><li>method C, which is for raw rubber on

51794,IS,,ISO 1407:2011,Rubber — Determination of solvent extract,Caoutchouc — Détermination de l'extrait par les solvants,2011-11-25,4,['83.060'],ISO/TC 45/SC 2,9599,[42242],[84138],"['en','fr','ru']",17,"<p>ISO 1407:2011 specifies four methods for the quantitative determination of the material extractable from raw rubbers, both natural and synthetic; two of the methods are also applicable to the unvulcanized and vulcanized compounds of raw rubbers.</p><p>Method A measures the mass of the solvent extract, after evaporation of the solvent, relative to the mass of the original test portion.</p><p>Method B measures the difference in the mass of the test portion before and after extraction.</p>

5998,IS,,ISO 1408:1976,Vulcanized rubber — Determination of carbon black content — Pyrolytic method,Caoutchouc vulcanisé — Détermination de la teneur en noir de carbone — Méthode pyrolytique,1976-10-01,1,['83.060'],ISO/TC 45,9599,,[5999],"['en','fr']",2,

5999,IS,,ISO 1408:1987,Rubber — Determination of carbon black content — Pyrolytic and chemical degradation methods,Caoutchouc — Détermination de la teneur en noir de carbone — Méthode pyrolytique et méthodes par dégradation chimique,1987-12-17,2,['83.060'],ISO/TC 45,9599,[5998],[21816],"['en','fr']",9,

54435,IS,,ISO 14085-3:2015,Aerospace series — Hydraulic filter elements — Test methods — Part 3: Filtration efficiency and retention capacity,Série aérospatiale — Eléments filtrants hydrauliques — Méthode d'essais — Partie 3: Efficacité de filtration et capacité de rétention,2015-02-26,1,['49.080'],ISO/TC 20/SC 10,9599,,[84283],['en'],37,"<p>ISO 14085-3:2015 describes two methods to measure in repeatable conditions the filtration efficiency of filter elements used in aviation and aerospace hydraulic fluid systems. It can be applied when evaluating the overall characteristics of a filter element per ISO 14085‑1, or separately.</p><p>Since the filtration efficiency of a filter element can chan

54454,IS,,ISO 14087:2011,Leather — Physical and mechanical tests — Determination of bending force,Cuir — Essais physiques et mécaniques — Détermination de la force de flexion,2011-11-25,1,['59.140.30'],IULTCS,9599,,[81923],"['en','fr']",6,<p>ISO 14087:2011 describes a test method for the determination of the bending force of leather.</p>

54458,IS,,ISO 14088:2012,Leather — Chemical tests — Quantitative analysis of tanning agents by filter method,Cuir — Essais chimiques — Analyse quantitative des agents de tannage par la méthode au filtre cloche,2012-01-19,1,['59.140.30'],IULTCS,9599,,[75174],"['en','fr']",10,<p>ISO 14088:2012 specifies a test method for the determination of tanning agents through filteration of all vegetable and synthetic tanning products.</p>

6000,IS,,ISO 1409:1983,Rubber latex — Determination of surface tension,Latex de caoutchouc — Détermination de la tension superficielle,1983-11-01,3,['83.040.10'],ISO/TC 45/SC 3,9599,,[6001],"['en','fr']",2,

6001,IS,,ISO 1409:1995,Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension by the ring method,Plastiques/caoutchouc — Dispersions de polymères et latex de caoutchouc (naturel et synthétique) — Détermination de la tension superficielle par la méthode de l'anneau,1995-12-27,4,"['83.080.01','83.040.10']",ISO/TC 45/SC 2,9599,[6000],[43680],"['en','fr']",6,"<p>Describes the determination of the surface tension of polymer dispersions, prevulcanized latices and natural as well as synthetic rubber latices by the ring method (du Nouy-type tensiometer). Applicable for polymer dispersions with a viscosity less than 200 mPa·s. Replaces the

43680,IS,,ISO 1409:2006,Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension by the ring method,Plastiques/caoutchouc — Dispersions de polymères et latex de caoutchouc (naturel et synthétique) — Détermination de la tension superficielle par la méthode de l'anneau,2006-09-14,5,"['83.080.01','83.040.10']",ISO/TC 45/SC 3,9599,[6001],[75823],"['en','fr']",7,"<p>ISO 1409:2006 specifies a ring method for the determination of the surface tension of polymer dispersions and rubber latices (natural and synthetic).</p><p>The method is valid for polymer dispersions and rubber latices with a viscosity less than 200 mPa·s. To achieve this, the

23597,IS,,ISO 14104:1995,Gears — Surface temper etch inspection after grinding,Engrenages — Contrôle par attaque chimique des zones revenues lors de la rectification,1995-12-14,1,['21.200'],ISO/TC 60/SC 2,9599,,[60410],"['en','fr']",6,"<p>Specifies standard procedures and requirements for the detection and classification of localized overheating on ground surfaces by chemical etch methods. Does apply to steel parts such as gears, shafts, splines and bearings, but does not apply to nitrided parts and stainless steels.</p>"

60410,IS,,ISO 14104:2014,"Gears — Surface temper etch inspection after grinding, chemical method",Engrenages — Contrôle par attaque chimique des zones surchauffées lors de la rectification,2014-05-28,2,['21.200'],ISO/TC 60/SC 2,9599,[23597],[70396],"['en','fr']",17,"<p>ISO 14104:2014 specifies procedures and requirements for the detection and classification of localized overheating on ground surfaces by chemical etch methods.</p><p>The process described in ISO 14104:2014 is typically used on ground surfaces; however, it is also useful for the detection of surface anomalies resultING from post-heat treatment machining such as hard turning, milling, and edge breaking (deburring) processes. Sur

23609,IS,,ISO 14113:1997,Gas welding equipment — Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar,Matériel de soudage aux gaz — Flexibles en caoutchouc et matière plastique pour les gaz comprimés ou liquéfiés jusqu'à une pression nominale maximale de 450 bar,1997-08-14,1,"['83.140.40','25.160.30']",ISO/TC 44/SC 8,9599,,[39101],"['en','fr']",9,

39101,IS,,ISO 14113:2007,Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa),Matériel de soudage aux gaz — Tuyaux souples et flexibles en caoutchouc et en plastique pour des gaz industriels jusqu'à 450 bar (45 MPa),2007-10-23,2,"['83.140.40','25.160.30']",ISO/TC 44/SC 8,9599,[23609],[62935],"['en','fr']",13,"<p>ISO 14113:2007 specifies requirements for rubber and plastics hose and hose assemblies for use with compressed, liquefied and dissolved gases up to a maximum working pressure of 45 MPa (450 bar), within the ambient temperature range of - 20 °C to + 60 °C.</p><p>ISO 14113:2007 applies to hose assemblies used to conne

23610,IS,,ISO 14114:1999,"Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — General requirements","Matériel de soudage aux gaz — Centrales de détente pour la distribution d'acétylène pour le soudage, le coupage et les techniques connexes — Exigences générales",1999-07-15,1,['25.160.30'],ISO/TC 44/SC 8,9599,,[55985],"['en','fr']",10,

55985,IS,,ISO 14114:2014,"Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — General requirements","Matériel de soudage aux gaz — Centrales de détente pour la distribution d'acétylène pour le soudage, le coupage et les techniques connexes — Exigences générales",2014-04-29,2,['25.160.30'],ISO/TC 44/SC 8,9599,[23610],[69237],"['en','fr','ru']",14,"<p>ISO 14114:2014 applies to acetylene cylinder manifold systems extending from the cylinder valve or the bundle outlet connections to the outlet connection of the main shut-off valve. It specifies requirements for design, materials and testing of cylinder manifold systems for the supply of acetylene for us

37068,IS,,ISO 14116:2008,"Protective clothing — Protection against heat and flame — Limited flame spread materials, material assemblies and clothing","Vêtements de protection — Protection contre la chaleur et la flamme — Matériaux, assemblages de matériaux et vêtements à propagation de flamme limitée",2008-04-07,1,['13.340.10'],ISO/TC 94/SC 13,9599,,[57454],"['en','fr']",8,"<p>ISO 14116:2008 specifies the performance requirements for the limited flame spread properties of materials, material assemblies and protective clothing in order to reduce the possibility of the clothing burning and thereby itself constituting a hazard. Additional requirements for clothing are also specified.</p><p>Prot

54917,IS,Cor,ISO 14116:2008/Cor 1:2009,"Protective clothing — Protection against heat and flame — Limited flame spread materials, material assemblies and clothing — Technical Corrigendum 1","Vêtements de protection — Protection contre la chaleur et la flamme — Matériaux, assemblages de matériaux et vêtements à propagation de flamme limitée — Rectificatif technique 1",2009-08-31,1,['13.340.10'],ISO/TC 94/SC 13,9599,,[57454],['fr'],,

54472,IS,,ISO 14117:2012,"Active implantable medical devices — Electromagnetic compatibility — EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices","Dispositifs médicaux implantables actifs — Compatibilité électromagnétique — Protocoles d'essai EMC pour pacemakers cardiaques implantables, défibrillateurs implantables et dispositifs de resynchronisation cardiaque",2012-07-10,1,"['33.100.01','11.040.40']",ISO/TC 150/SC 6,9599,,[73915],['en'],97,"<p>ISO 14117:2012 specifies test methodologies for the evaluation of the electromagnetic compatibility (EMC) of active implantable cardiovascular devices that provide one

22584,IS,,ISO 14118:2000,Safety of machinery — Prevention of unexpected start-up,Sécurité des machines — Prévention de la mise en marche intempestive,2000-09-21,1,['13.110'],ISO/TC 199,9599,,[66460],"['en','fr']",13,

22585,IS,,ISO 14119:1998,Safety of machinery — Interlocking devices associated with guards — Principles for design and selection,Sécurité des machines — Dispositifs de verrouillage associés à des protecteurs — Principes de conception et de choix,1998-04-30,1,['13.110'],ISO/TC 199,9599,,[45291],"['en','fr']",42,

40866,IS,Amd,ISO 14119:1998/Amd 1:2007,Safety of machinery — Interlocking devices associated with guards — Principles for design and selection — Amendment 1: Design to minimize defeat possibilities,Sécurité des machines — Dispositifs de verrouillage associés à des protecteurs — Principes de conception et de choix — Amendement 1: Conception réduisant les possibilités de neutralisation,2007-05-11,1,['13.110'],ISO/TC 199,9599,,[45291],"['en','fr']",5,

45291,IS,,ISO 14119:2013,Safety of machinery — Interlocking devices associated with guards — Principles for design and selection,Sécurité des machines — Dispositifs de verrouillage associés à des protecteurs — Principes de conception et de choix,2013-09-25,2,['13.110'],ISO/TC 199,9599,"[22585,40866]",[75942],"['en','fr']",68,<p>ISO 14119:2013 specifies principles for the design and selection ? independent of the nature of the energy source ? of interlocking devices associated with guards.It covers the parts of guards which actuate interlocking devices. It does not necessarily provide all the specific requirements for trapped key systems.</p><p>ISO 14119:2013 provides measures to minimize def

35561,IS,,ISO 14120:2002,Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards,Sécurité des machines — Protecteurs — Prescriptions générales pour la conception et la construction des protecteurs fixes et mobiles,2002-01-31,1,['13.110'],ISO/TC 199,9599,,[59545],"['en','fr']",26,

38479,IS,,ISO 14121-1:2007,Safety of machinery — Risk assessment — Part 1: Principles,Sécurité des machines — Appréciation du risque — Partie 1: Principes,2007-08-23,1,['13.110'],ISO/TC 199,9599,[22587],[51528],"['en','fr']",28,"<p>ISO 14121-1:2007 establishes general principles intended to be used to meet the risk reduction objectives established in ISO 12100-1:2003, Clause 5. These principles of risk assessment bring together knowledge and experience of the design, use, incidents, accidents and harm related to machinery in order to assess the risks posed during the relevant phases of the life cycle of a machine.</p><p>ISO 14121-1:2007 provides guidance on the information that will be requi

22587,IS,,ISO 14121:1999,Safety of machinery — Principles of risk assessment,Sécurité des machines — Principes pour l'appréciation du risque,1999-02-11,1,['13.110'],ISO/TC 199,9599,,[38479],"['en','fr']",18,

22590,IS,,ISO 14122-1:2001,Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means of access between two levels,Sécurité des machines — Moyens d'accès permanents aux machines — Partie 1: Choix d'un moyen d'accès fixe entre deux niveaux,2001-06-07,1,['13.110'],ISO/TC 199,9599,,[61279],"['en','fr']",9,