Withdrawn and superseded ISO standards — page 39 of 246

3952,IS,,ISO 139:1973,Textiles — Standard atmospheres for conditioning and testing,Textiles — Atmosphères normales de conditionnement et d'essai,1973-09-01,1,['59.080.01'],ISO/TC 38,9599,,"[35179,1850]","['en','fr']",1,"<p>The conditions of temperature and relative humidity for pre-conditioning, conditioning, and testing of textile materials of all kinds and in all forms are specified. A standard temperate atmosphere, a standard temperate atmosphere for testing, a standard tropical atmosphere, and a standard tropical atmosphere for testing are defined. (The adjectives 'temperate' and 'tropical' have a limited use only for the textile industry.)</p>"

37259,IS,,ISO 13904:2005,Animal feeding stuffs — Determination of tryptophan content,Aliments des animaux — Dosage du tryptophane,2005-05-11,1,['65.120'],ISO/TC 34/SC 10,9599,,[59955],"['en','fr']",9,"<p>ISO 13904:2005 describes the determination of the total and free tryptophan in feeding stuffs (e.g. complete and complementary feeds, supplementary feeds, raw materials, ingredients, premixtures and concentrates. It does not distinguish between D- and L-forms.</p>"

2004,IS,,ISO 13909-1:2001,Hard coal and coke — Mechanical sampling — Part 1: General introduction,Houille et coke — Échantillonnage mécanique — Partie 1: Introduction générale,2001-12-20,1,"['73.040','75.160.10']",ISO/TC 27/SC 4,9599,"[17110,17111]",[63907],"['en','fr']",9,

63907,IS,,ISO 13909-1:2016,Hard coal and coke — Mechanical sampling — Part 1: General introduction,Houille et coke — Échantillonnage mécanique — Partie 1: Introduction générale,2016-06-23,2,"['73.040','75.160.10']",ISO/TC 27/SC 4,9599,[2004],[87036],['en'],9,"<p>ISO 13909-1:2016 defines the basic terms used in the sampling of solid mineral fuels, describes the general principles of sampling and details the information to be provided in the documentation and the sampling report. It also lists the other parts and gives guidance on the selection of the appropriate part.</p><p>It does not include sampling of brown coals and lignites, or sampling from coal seams, for which guidance is given in IS

1986,IS,,ISO 13909-2:2001,Hard coal and coke — Mechanical sampling — Part 2: Coal — Sampling from moving streams,Houille et coke — Échantillonnage mécanique — Partie 2: Charbon — Échantillonnage en continu,2001-12-20,1,['73.040'],ISO/TC 27/SC 4,9599,"[17110,17111]",[63908],"['en','fr']",31,

63908,IS,,ISO 13909-2:2016,Hard coal and coke — Mechanical sampling — Part 2: Coal — Sampling from moving streams,Houille et coke — Échantillonnage mécanique — Partie 2: Charbon — Échantillonnage en continu,2016-06-23,2,['73.040'],ISO/TC 27/SC 4,9599,[1986],[87037],['en'],30,<p>ISO 13909-2:1016 specifies procedures and requirements for the design and establishment of mechanical samplers for the sampling of coal from moving streams and describes the methods of sampling used.</p><p>It does not cover mechanical sampling from stationary lots which is dealt with in ISO 13909‑3[1].</p>

1977,IS,,ISO 13909-3:2001,Hard coal and coke — Mechanical sampling — Part 3: Coal — Sampling from stationary lots,Houille et coke — Échantillonnage mécanique — Partie 3: Charbon — Échantillonnage sur lots statiques,2001-12-20,1,['73.040'],ISO/TC 27/SC 4,9599,"[17110,17111]",[63909],"['en','fr']",19,

63909,IS,,ISO 13909-3:2016,Hard coal and coke — Mechanical sampling — Part 3: Coal — Sampling from stationary lots,Houille et coke — Échantillonnage mécanique — Partie 3: Charbon — Échantillonnage sur lots statiques,2016-06-23,2,['73.040'],ISO/TC 27/SC 4,9599,[1977],[87038],['en'],18,"<p>ISO 13909-3:2016 specifies procedures for the mechanical sampling of coal from stationary lots, for example, from wagons, barges, ships and stockpiles. These procedures are to be used when it is not possible to sample the lots during loading or discharge according to ISO 13909‑2:2016. Procedures for sample preparation are given in ISO 13909‑4:2016.</p><p>ISO 13909-3:2016 is applicable to mechanical sampling

1959,IS,,ISO 13909-4:2001,Hard coal and coke — Mechanical sampling — Part 4: Coal — Preparation of test samples,Houille et coke — Échantillonnage mécanique — Partie 4: Charbon — Préparation des échantillons pour essai,2001-12-20,1,['73.040'],ISO/TC 27/SC 4,9599,"[17110,17111]",[63910],"['en','fr']",29,

63910,IS,,ISO 13909-4:2016,Hard coal and coke — Mechanical sampling — Part 4: Coal — Preparation of test samples,Houille et coke — Échantillonnage mécanique — Partie 4: Charbon — Préparation des échantillons pour essai,2016-06-23,2,['73.040'],ISO/TC 27/SC 4,9599,[1959],[87039],['en'],30,<p>ISO 13909-4:2016 describes the preparation of samples of coal from the combination of primary increments to the preparation of samples for specific tests.</p>

2022,IS,,ISO 13909-5:2001,Hard coal and coke — Mechanical sampling — Part 5: Coke — Sampling from moving streams,Houille et coke — Échantillonnage mécanique — Partie 5: Coke — Échantillonnage en continu,2001-12-20,1,['75.160.10'],ISO/TC 27/SC 4,9599,"[17110,17111]",[63911],"['en','fr']",29,

63911,IS,,ISO 13909-5:2016,Hard coal and coke — Mechanical sampling — Part 5: Coke — Sampling from moving streams,Houille et coke — Échantillonnage mécanique — Partie 5: Coke — Échantillonnage en continu,2016-06-23,2,['75.160.10'],ISO/TC 27/SC 4,9599,[2022],[87040],['en'],22,<p>ISO 13909-5:2016 specifies procedures and requirements for the design and establishment of sampling schemes for the mechanical sampling of coke from moving streams and the methods of sampling used.</p><p>The diversity of types of equipment for sampling and the conditions under which mechanical sampling is performed make it inappropriate to specify standard designs for samplers which will be applicable to all situation

2040,IS,,ISO 13909-6:2001,Hard coal and coke — Mechanical sampling — Part 6: Coke — Preparation of test samples,Houille et coke — Échantillonnage mécanique — Partie 6: Coke — Préparation des échantillons pour essai,2001-12-20,1,['75.160.10'],ISO/TC 27/SC 4,9599,"[17110,17111]",[63912],"['en','fr']",24,

63912,IS,,ISO 13909-6:2016,Hard coal and coke — Mechanical sampling — Part 6: Coke — Preparation of test samples,Houille et coke — Échantillonnage mécanique — Partie 6: Coke — Préparation des échantillons pour essai,2016-06-23,2,['75.160.10'],ISO/TC 27/SC 4,9599,[2040],[87041],['en'],25,<p>ISO 13909-6:2016 describes the preparation of samples of coke from the combination of primary increments to the preparation of samples for specific tests.</p>

1932,IS,,ISO 13909-7:2001,"Hard coal and coke — Mechanical sampling — Part 7: Methods for determining the precision of sampling, sample preparation and testing","Houille et coke — Échantillonnage mécanique — Partie 7: Méthodes pour la détermination de la fidélité de l'échantillonnage, de la préparation de l'échantillon et de l'essai",2001-12-20,1,"['73.040','75.160.10']",ISO/TC 27/SC 4,9599,"[17110,17111]",[63913],"['en','fr']",40,

63913,IS,,ISO 13909-7:2016,"Hard coal and coke — Mechanical sampling — Part 7: Methods for determining the precision of sampling, sample preparation and testing","Houille et coke — Échantillonnage mécanique — Partie 7: Méthodes pour la détermination de la fidélité de l'échantillonnage, de la préparation de l'échantillon et de l'essai",2016-06-23,2,"['73.040','75.160.10']",ISO/TC 27/SC 4,9599,[1932],[87042],['en'],43,"<p>In ISO 13909-7:2016, formulae are developed which link the variables that contribute to overall sampling precision. Methods are described for estimating overall precision and for deriving values for primary increment variance which can be used to modify the sampling scheme to

2013,IS,,ISO 13909-8:2001,Hard coal and coke — Mechanical sampling — Part 8: Methods of testing for bias,Houille et coke — Échantillonnage mécanique — Partie 8: Méthodes de détection du biais,2001-12-20,1,"['73.040','75.160.10']",ISO/TC 27/SC 4,9599,"[17110,17111]",[63914],"['en','fr']",31,

63914,IS,,ISO 13909-8:2016,Hard coal and coke — Mechanical sampling — Part 8: Methods of testing for bias,Houille et coke — Échantillonnage mécanique — Partie 8: Méthodes de détection du biais,2016-06-23,2,"['73.040','75.160.10']",ISO/TC 27/SC 4,9599,[2013],[87043],['en'],28,"<p>ISO 13909-8:2016 sets out principles and procedures for testing the bias of test samples of hard coals or cokes, taken in accordance with ISO 13909: 2016 (all parts).</p><p>NOTE In the text, the term 'fuel' is used where both coal and coke would be applicable in the context and either 'coal' or 'coke' where only one is applicable.</p>"

35385,IS,,ISO 13910:2005,"Structural timber — Characteristic values of strength-graded timber — Sampling, full-size testing and evaluation","Bois de structure — Valeurs caractéristiques du bois classé selon la résistance — Échantillonnage, essais en grandeur nature et évaluation",2005-02-11,1,['91.080.20'],ISO/TC 165,9599,,[52977],['en'],22,"<p>ISO 13910:2005 specifies sampling, full-size testing and evaluation procedures for the assessment of the characteristic values of the structural properties of sawn timber for use in codes dealing with structural engineering design. It provides methods for establishing equivalency with other standards for the testing and evaluation of characteristic pr

35386,IS,,ISO 13912:2005,Structural timber — Machine strength grading — Basic principles,Bois de structure — Classement par machine selon la résistance — Principes de base,2005-07-13,1,['79.040'],ISO/TC 165,9599,,[69945],"['en','fr']",22,<p>ISO 13912:2005 establishes the basic principles for rules and procedures governing the machine sorting of timber for use in structural applications.</p>

54343,IS,,ISO 13914:2013,Soil quality — Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high-resolution mass selective detection (GC/HRMS),Qualité du sol — Détermination des dioxines et furanes comme biphényls polychlorés par chromatographie en phase gazeuse avec spectrométrie de masse à haute résolution (CG/SMHR),2013-11-20,1,['13.080.10'],ISO/TC 190/SC 3,9599,,[81519],['en'],34,"<p>ISO 13914:2013 specifies a method for quantitative determination of 17 2,3,7,8-chlorine substituted dibenzo-<i>p</i>-dioxins and dibenzofurans and dioxin-like polychlorinated biphenyls in sludge, treated biowaste, and soil using liquid column chromatograph

81519,IS,,ISO 13914:2023,"Soil, treated biowaste and sludge — Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high resolution mass selective detection (HR GC-MS)","Sols, biodéchets traités et boues — Dosage des dioxines, des furanes et des polychlorobiphényles de type dioxine par chromatographie en phase gazeuse avec spectrométrie de masse à haute résolution (HR CG-SM)",2023-02-22,2,['13.080.10'],ISO/TC 190/SC 3,9599,[54343],[90768],"['en','fr']",37,"<p class='MsoBodyText' style='mso-layout-grid-align: none; text-autospace: none;'><span lang='EN-GB' style='mso-bidi-font-size: 12.0pt;'>This document specifies a method for quantitative d

23309,IS,,ISO 13916:1996,"Welding — Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature","Soudage — Lignes directrices pour le mesurage de la température de préchauffage, de la température entre passes et de la température de maintien du préchauffage",1996-08-01,1,['25.160.10'],ISO/TC 44/SC 10,9599,,[68957],"['en','fr']",3,"<p>Requirements for the measurement of preheating temperature, interpass temperature and preheat maintenance temperature for fusion welding. Also applicable to other welding processes. Does not apply for the measurement of post weld heat treatment temperatures.</p>"

68957,IS,,ISO 13916:2017,"Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature","Soudage — Mesurage de la température de préchauffage, de la température entre passes et de la température de maintien du préchauffage",2017-10-31,2,['25.160.10'],ISO/TC 44/SC 10,9599,[23309],[88397],"['en','fr']",4,"<p>ISO 13916:2017 specifies requirements for the measurement of preheating temperature, interpass temperature and preheat maintenance temperature for fusion welding. ISO 13916:2017 can also be applied as appropriate in the case of other welding processes. ISO 13916:2017 does not cover the measurement of post weld heat treatment temperatures.</p>"

23311,IS,,ISO 13918:1998,Welding — Studs and ceramic ferrules for arc stud welding,Soudage — Goujons et bagues en céramique pour le soudage à l'arc des goujons,1998-12-20,1,['21.060.10'],ISO/TC 44/SC 10,9599,,[38138],"['en','fr']",21,

38138,IS,,ISO 13918:2008,Welding — Studs and ceramic ferrules for arc stud welding,Soudage — Goujons et bagues céramiques pour le soudage à l'arc des goujons,2008-02-06,2,"['21.060.10','25.160.10']",ISO/TC 44/SC 10,9599,[23311],[67251],"['en','fr']",32,"<p>ISO 13918:2008 specifies requirements for studs and ceramic ferrules for arc stud welding, dimensions, materials, mechanical properties and, when required, conditions of evaluation of conformity.</p>"

23312,IS,,ISO 13919-1:1996,Welding — Electron and laser-beam welded joints — Guidance on quality levels for imperfections — Part 1: Steel,Soudage — Assemblages soudés par faisceau d'électrons et par faisceau laser — Guide des niveaux de qualité des défauts — Partie 1: Acier,1996-08-01,1,['25.160.40'],ISO/TC 44/SC 10,9599,,[75514],"['en','fr']",7,<p>Gives guidance on quality levels of imperfections in electron and laser beam welded joints in steel. Three levels are given which refer to production quality.</p>

26891,IS,,ISO 13919-2:2001,Welding — Electron and laser beam welded joints — Guidance on quality levels for imperfections — Part 2: Aluminium and its weldable alloys,Soudage — Assemblages soudés par faisceau d'électrons et par faisceau laser — Guide des niveaux de qualité des défauts — Partie 2: Aluminium et ses alliages soudables,2001-09-27,1,['25.160.40'],ISO/TC 44/SC 10,9599,,[75515],"['en','fr']",10,

23313,IS,,ISO 13920:1996,Welding — General tolerances for welded constructions — Dimensions for lengths and angles — Shape and position,Soudage — Tolérances générales relatives aux constructions soudées — Dimensions des longueurs et angles — Formes et positions,1996-08-01,1,"['25.160.10','17.040.10']",ISO/TC 44/SC 10,9599,,[86032],"['en','fr']",5,"<p>Specifies general tolerances for linear and angular dimensions and for shape and position of welded structures in four classes, these being based on customary workshop accuracy. The main criterion for the selection of a particular class should be the functional requirements.</p>"

23317,IS,,ISO 13921:1996,"Aerospace — Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions","Aéronautique et espace — Vis à tête fraisée 100 degrés réduite, à empreinte cruciforme déportée, avec ou sans saillies antidérapantes, à tige normale et filetage MJ court ou de longueur moyenne, en matériau métallique, revêtues ou non revêtues, des classes de résistance inférieures ou égales à 1 100 MPa — Dimensions",1996-08-15,1,['49.030.20'],ISO/TC 20/SC 4,9599,,[41824],"['en','fr']",3,"<p>Specifies the dim

23338,IS,,ISO 13926-1:1996,Pen systems — Part 1: Glass cylinders for insulin pen-injectors,Systèmes de stylos-injecteurs — Partie 1: Cylindres en verre pour des stylos-injecteurs pour insuline,1996-01-25,1,['11.040.25'],ISO/TC 76,9599,,[27065],"['en','fr']",3,

27065,IS,,ISO 13926-1:1998,Pen systems — Part 1: Glass cylinders for pen-injectors for medical use,Systèmes de stylos-injecteurs — Partie 1: Cylindres en verre pour des stylos-injecteurs à usage médical,1998-07-02,2,['11.040.25'],ISO/TC 76,9599,[23338],[40331],"['en','fr']",4,

40331,IS,,ISO 13926-1:2004,Pen systems — Part 1: Glass cylinders for pen-injectors for medical use,Systèmes de stylos-injecteurs — Partie 1: Cylindres en verre pour des stylos-injecteurs à usage médical,2004-11-02,3,['11.040.25'],ISO/TC 76,9599,[27065],[73466],"['en','fr']",5,"<p>ISO 13926-1:2004 specifies the design, dimensions, materials, performance and test methods for glass cylinders used with pen-injectors for medical use.</p><p>It applies to the primary container used in direct contact with the drug.</p>"

24604,IS,,ISO 13926-2:1999,Pen systems — Part 2: Plungers and discs for pen-injectors for medical use,Systèmes de stylos-injecteurs — Partie 2: Bouchons-pistons et rondelles d'étanchéité pour stylos-injecteurs à usage médical,1999-04-22,1,['11.040.25'],ISO/TC 76,9599,,[53949],"['en','fr']",13,

53949,IS,,ISO 13926-2:2011,Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use,Systèmes de stylos-injecteurs — Partie 2: Bouchons-pistons pour stylos-injecteurs à usage médical,2011-03-18,2,['11.040.25'],ISO/TC 76,9599,[24604],[72576],['en'],7,"<p>ISO 13926-2:2011 specifies the shape, dimensions, material, performance requirements and labelling of plunger stoppers for pen-injectors for medical use. </p>"

65447,IS,Amd,ISO 13926-2:2011/Amd 1:2015,Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use — Amendment 1,Systèmes de stylos-injecteurs — Partie 2: Bouchons-pistons pour stylos-injecteurs à usage médical — Amendement 1,2015-08-17,2,['11.040.25'],ISO/TC 76,9599,,[72576],['en'],1,

53950,IS,,ISO 13926-3:2012,Pen systems — Part 3: Seals for pen-injectors for medical use,Systèmes de stylos-injecteurs — Partie 3: Joints pour stylos-injecteurs à usage médical,2012-04-24,1,['11.040.25'],ISO/TC 76,9599,,[75131],"['en','fr']",7,

23339,IS,,ISO 13927:2001,Plastics — Simple heat release test using a conical radiant heater and a thermopile detector,Plastiques — Essai simple pour la détermination du débit calorifique au moyen d'un radiateur conique et d'une sonde à thermopile,2001-03-29,1,['83.080.01'],ISO/TC 61/SC 4,9599,,[52841],"['en','fr']",18,

52841,IS,,ISO 13927:2015,Plastics — Simple heat release test using a conical radiant heater and a thermopile detector,Plastiques — Essai simple pour la détermination du débit calorifique au moyen d'un radiateur conique et d'une sonde à thermopile,2015-04-10,2,['83.080.01'],ISO/TC 61/SC 4,9599,[23339],[82203],"['en','fr']",21,<p>ISO 13927:2015 specifies a method suitable for the production control or product development purposes for assessing the heat release rate of essentially flat products exposed in the horizontal orientation to controlled levels of radiant heating with an external igniter. The heat release rate is determined by the use of a thermopile instead of the more accurate oxygen

23353,IS,,ISO 13930:1998,Iron ores — Dynamic test for low-temperature reduction-disintegration,Minerais de fer — Essai dynamique de désagrégation par réduction à basse température,1998-07-30,1,['73.060.10'],ISO/TC 102/SC 3,9599,,[38070],['en'],10,

38070,IS,,ISO 13930:2007,Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by dynamic method,"Minerais de fer pour charges de hauts fourneaux — Détermination des indices de désintégration par réduction à basse température, par méthode dynamique",2007-10-30,2,['73.060.10'],ISO/TC 102/SC 3,9599,[23353],[62140],"['en','ru']",9,<p>ISO 13930:2007 specifies a method to provide a relative measure for evaluating the degree of size degradation of iron ores when reduced under conditions resembling those prevailing in the low-temperature reduction zone of the blast furnace.</p><p>ISO 13930:2007 is applicable to lump ores and hot-bonded pellets.</

23363,IS,,ISO 13934-1:1999,Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method,Textiles — Propriétés des étoffes en traction — Partie 1: Détermination de la force maximale et de l'allongement à la force maximale par la méthode sur bande,1999-02-18,1,['59.080.30'],ISO/TC 38/SC 24,9599,[11103],[60676],"['en','fr']",12,

23364,IS,,ISO 13934-2:1999,Textiles — Tensile properties of fabrics — Part 2: Determination of maximum force using the grab method,Textiles — Propriétés des étoffes en traction — Partie 2: Détermination de la force maximale par la méthode d'arrachement (Grab test),1999-02-18,1,['59.080.30'],ISO/TC 38/SC 24,9599,,[60677],"['en','fr']",9,

23365,IS,,ISO 13935-1:1999,Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1: Determination of maximum force to seam rupture using the strip method,Textiles — Propriétés de résistance à la traction des coutures d'étoffes et d'articles textiles confectionnés — Partie 1: Détermination de la force maximale avant rupture des coutures par la méthode sur bande,1999-02-18,1,"['59.080.30','61.020']",ISO/TC 38/SC 24,9599,,[60678],"['en','fr']",7,

23366,IS,,ISO 13935-2:1999,Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method,Textiles — Propriétés de résistance à la traction des coutures d'étoffes et d'articles textiles confectionnés — Partie 2: Détermination de la force maximale avant rupture des coutures par la méthode d'arrachement (Grab test),1999-02-18,1,"['59.080.30','61.020']",ISO/TC 38/SC 24,9599,,[60679],"['en','fr']",8,

60679,IS,,ISO 13935-2:2014,Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method,Textiles — Propriétés de résistance à la traction des coutures d'étoffes et d'articles textiles confectionnés — Partie 2: Détermination de la force maximale avant rupture des coutures par la méthode d'arrachement (Grab test),2014-03-03,2,"['59.080.30','61.020']",ISO/TC 38/SC 24,9599,[23366],[88344],"['en','fr']",9,"<p>ISO 13935-2:2014 specifies methods for the determination of seam maximum force of sewn seams when the force is applied perpendicularly to the seam. ISO 13935-2:2014 describes the method known as the

23374,IS,,ISO 13938-1:1999,Textiles — Bursting properties of fabrics — Part 1: Hydraulic method for determination of bursting strength and bursting distension,Textiles — Propriétés de résistance à l'éclatement des étoffes — Partie 1: Méthode hydraulique pour la détermination de la résistance et de la déformation à l'éclatement,1999-08-26,1,['59.080.30'],ISO/TC 38/SC 24,9599,[8008],[74895],"['en','fr']",8,

23375,IS,,ISO 13938-2:1999,Textiles — Bursting properties of fabrics — Part 2: Pneumatic method for determination of bursting strength and bursting distension,Textiles — Propriétés de résistance à l'éclatement des étoffes — Partie 2: Méthode pneumatique pour la détermination de la résistance et de la déformation à l'éclatement,1999-08-26,1,['59.080.30'],ISO/TC 38/SC 24,9599,,[74896],"['en','fr']",7,

54354,IS,,ISO 13939:2012,"Foil bearings — Guidelines for testing of the performance of foil journal bearings —Testing of load capacity, friction coefficient and lifetime","Paliers-feuilles — Lignes directrices pour les essais de performance des paliers radiaux à feuilles non lubrifiés — Essais de la capacité de charge, du coefficient de friction et de la durée de vie",2012-07-20,1,['21.100.10'],ISO/TC 123/SC 7,9599,,[75671],['en'],16,"<p>ISO 13939:2012 describes a method of comparing the performance test results of foil journal bearings, which are lubricated by air (gas) and supported by hydrodynamic force generated by the rotation of the rotating shaft. The test procedure proposed in ISO 13

23381,IS,,ISO 13942:2000,Bonded abrasive products — Limit deviations and run-out tolerances,Produits abrasifs agglomérés — Écarts limites et tolérances de battement,2000-12-21,1,['25.100.70'],ISO/TC 29/SC 5,9599,,"[60395,73336]","['en','fr']",18,

23382,IS,,ISO 13943:2000,Fire safety — Vocabulary,Sécurité au feu — Vocabulaire,2000-04-13,1,"['13.220.01','01.040.13']",ISO/TC 92,9599,[19758],[43634],"['en','fr']",45,

43634,IS,,ISO 13943:2008,Fire safety — Vocabulary,Sécurité au feu — Vocabulaire,2008-10-08,2,"['13.220.01','01.040.13']",ISO/TC 92,9599,[23382],[63321],"['en','fr','ru']",51,<p>ISO13943:2008 defines terminology relating to fire safety as used in International Standards and other documents of the International Standardization Organization and the International Electrotechnical Committee.</p>

63321,IS,,ISO 13943:2017,Fire safety — Vocabulary,Sécurité au feu — Vocabulaire,2017-08-03,3,"['13.220.01','01.040.13']",ISO/TC 92,9599,[43634],[85121],"['en','fr']",53,<p>ISO 13943:2017 defines terminology relating to fire safety as used in ISO and IEC fire standards.</p>

23395,IS,,ISO 13944:1996,Lubricated metal-powder mixes — Determination of lubricant content — Modified Soxhlet extraction method,"Mélanges de poudres métalliques lubrifiées — Détermination de la teneur en lubrifiant — Méthode d'extraction au Soxhlet, modifiée",1996-12-26,1,['77.160'],ISO/TC 119/SC 2,9599,[10391],[60516],"['en','fr']",4,"<p>Method for the determination of the lubricant content of a powder mix. The method is also suitable for measuring the content of elements such as graphite and oxygen, the determination of which is interfered with the presence of a lubricant.</p>"

38256,IS,,ISO 13947:2007,Metallic powders — Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen,Poudres métalliques — Détermination de la teneur en inclusions non métalliques dans les poudres métalliques à l'aide d'une éprouvette forgée de poudre,2007-02-06,1,['77.160'],ISO/TC 119/SC 2,9599,,[59928],['en'],5,"<p>ISO 13947:2007 specifies a metallographic method for determining the non-metallic inclusion level in metal powders using a powder-forged specimen. The test method covers repress powder-forged test specimens in which there has been minimal lateral flow (&lt; 1 %). The core region of the powder-forged test specimen contains no po

59928,IS,,ISO 13947:2011,Metallic powders — Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen,Poudres métalliques — Détermination de la teneur en inclusions non métalliques dans les poudres métalliques à l'aide d'une éprouvette forgée de poudre,2011-11-25,2,['77.160'],ISO/TC 119/SC 2,9599,[38256],[85818],['en'],5,"<p>ISO 13947:2011 specifies a metallographic method for determining the non-metallic inclusion level in metal powders using a powder-forged specimen. The test method covers repress powder-forged test specimens in which there has been minimal lateral flow (&lt; 1 %). The core region of the powder-forged test specimen contain

28905,IS,,ISO 13948-1:2000,Diesel engines — Fuel injection pumps and fuel injector low-pressure connections — Part 1: Threaded connections,Moteurs diesels — Raccords basse pression pour pompes d'injection de combustible et porte-injecteurs de combustible complets — Partie 1: Raccords filetés,2000-04-20,1,['43.060.40'],ISO/TC 22/SC 34,9599,,[63979],['en'],9,

28904,IS,,ISO 13948-2:2000,Diesel engines — Fuel injection pumps and fuel injector low-pressure connections — Part 2: Non-threaded (push-on) connections,Moteurs diesels — Raccords basse pression pour pompes d'injection de combustible et porte-injecteurs de combustible complets — Partie 2: Raccords non filetés (à pression),2000-04-20,1,['43.060.40'],ISO/TC 22,9599,,[54137],['en'],5,

54137,IS,,ISO 13948-2:2012,Diesel engines — Fuel injection pumps and fuel injector low-pressure connections — Part 2: Non-threaded (push-on) connections,Moteurs diesels — Raccords basse pression pour pompes d'injection de combustible et porte-injecteurs de combustible complets — Partie 2: Raccords non filetés (à pression),2012-03-30,2,['43.060.40'],ISO/TC 22/SC 34,9599,[28904],[69502],['en'],11,"<p>ISO 13948-2:2012 specifies requirements for the connection ends of push-on connections used with fuel injection equipment.</p><p>Three types of push-on connections (types A, B and C) are described in ISO 13948-2:2012.</p>"

69502,IS,,ISO 13948-2:2016,Diesel engines — Fuel injection pumps and fuel injector low-pressure connections — Part 2: Non-threaded (push-on) connections,Moteurs diesels — Raccords basse pression pour pompes d'injection de combustible et porte-injecteurs de combustible complets — Partie 2: Raccords non filetés (à pression),2016-12-08,3,['43.060.40'],ISO/TC 22/SC 34,9599,[54137],[85010],['en'],12,"<p>ISO 13948-2:2016 specifies requirements for the connection ends of push-on connections used with fuel injection equipment.</p><p>Three types of push-on connections (types A, B and C) are described in this document.</p>"

23413,IS,,ISO 13949:1997,"Method for the assessment of the degree of pigment dispersion in polyolefin pipes, fittings and compounds","Méthode d'estimation de la dispersion des pigments dans les tubes, les raccords et les compositions à base de polyoléfines",1997-12-25,1,"['23.040.45','23.040.20']",ISO/TC 138/SC 5,9599,,[31177],"['en','fr']",8,

5980,IS,,ISO 1395:1977,Short pitch transmission precision bush chains and chain wheels,"Chaînes de transmission de précision à douilles, à pas court, et roues dentées correspondantes",1977-01-01,1,['21.220.30'],ISO/TC 100,9599,,"[38940,24674]","['en','fr']",10,"<p>Specifies the characteristics of bush chains of simple and multiplex construction suitable for the mechanical transmission of power and allied applications, together with the tooth gap forms and rim profiles of their associated chain wheels. It covers dimensions, tolerances, measuring loads and minimum breaking loads. Applies to chains of two pitches only. The dimensions ensure complete interchangeability of individual links of cha

5981,IS,Amd,ISO 1395:1977/Amd 1:1982,Short pitch transmission precision bush chains and chain wheels — Amendment 1,"Chaînes de transmission de précision à douilles, à pas court, et roues dentées correspondantes — Amendement 1",1982-11-01,1,['21.220.30'],ISO/TC 100,9599,,"[38940,24674]","['en','fr']",3,"<p>Amends the text of subclauses 3.4 (minimum ultimate tensile strenght), 3.5 (measuring load), and parts of the text of subclauses 3.6, 5.5.1, 5.5.2 and tables 1 and 1 M.</p>"

23415,IS,,ISO 13951:2001,Plastics piping systems — Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading,Systèmes de canalisations en plastiques — Méthode d'essai de la résistance en traction des assemblages tube/tube ou tube/raccord en polyoléfines,2001-04-19,1,['23.040.01'],ISO/TC 138/SC 5,9599,,[63339],"['en','fr']",4,

23418,IS,,ISO 13954:1997,Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm,Tubes et raccords en matières plastiques — Essai de décohésion par pelage des assemblages électrosoudables en polyéthylène (PE) de diamètres extérieurs nominaux supérieurs ou égaux à 90 mm,1997-12-25,1,['23.040.60'],ISO/TC 138/SC 5,9599,,[84784],"['en','fr']",6,

79726,IS,Amd,ISO 13954:1997/Amd 1:2020,Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm — Amendment 1,Tubes et raccords en matières plastiques — Essai de décohésion par pelage des assemblages électrosoudables en polyéthylène (PE) de diamètres extérieurs nominaux supérieurs ou égaux à 90 mm — Amendement 1,2020-04-20,1,['23.040.60'],ISO/TC 138/SC 5,9599,,[84784],"['en','fr']",1,

50926,IS,,ISO 13956:2010,Plastics pipes and fittings — Decohesion test of polyethylene (PE) saddle fusion joints — Evaluation of ductility of fusion joint interface by tear test,Tubes et raccords en matières plastiques — Essai de décohésion des selles en polyéthylène (PE) assemblées par soudage — Évaluation de la ductilité de l'interface de soudage par essai d'arrachement,2010-09-22,1,['23.040.60'],ISO/TC 138/SC 5,9599,,[85031],['en'],10,"<p>ISO 13956:2010 specifies a method for the evaluation of the ductility of the fusion joint interface of assemblies of polyethylene (PE) pipe and electrofusion or heated tool saddles, intended for the conveyance of fluids.</p>"

36455,IS,,ISO 13958:2002,Concentrates for haemodialysis and related therapies,Concentrés pour hémodialyse et thérapies apparentées,2002-09-19,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[43698],['en'],5,"<p>This International Standard is applicable to dry and liquid concentrates to be diluted for use as dialysing fluids in haemodialysis or haemodiafiltration. It addresses chemical quality and purity, microbial contamination, handling, measurement and labelling of concentrates, the requirements for containers and the tests to monitor concentrates.</p><p>This International Standard does not address the final mixing and use of these concentrates and treated water in such therapies. That operation is

43698,IS,,ISO 13958:2009,Concentrates for haemodialysis and related therapies,Concentrés pour hémodialyse et thérapies apparentées,2009-04-15,2,['11.040.40'],ISO/TC 150/SC 2,9599,[36455],[61861],"['en','ru']",22,"<p>ISO 13958:2009 specifies minimum requirements for concentrates used for haemodialysis and related therapies. For the purpose of this International Standard, “concentrates” are a mixture of chemicals and water, or a mixture of chemicals in the form of dry powder or other highly concentrated media, that are delivered to the end user to make dialysis fluid used to perform haemodialysis and related therapies.</p><p>ISO 13958:2009 is addressed to the manufacturer of such concentrates.

61861,IS,,ISO 13958:2014,Concentrates for haemodialysis and related therapies,Concentrés pour hémodialyse et thérapies apparentées,2014-03-17,3,['11.040.40'],ISO/TC 150/SC 2,9599,[43698],[67613],"['en','fr']",26,"<p>ISO 13958:2014 specifies minimum requirements for concentrates used for haemodialysis and related therapies. For the purpose of ISO 13958:2014, 'concentrates' are a mixture of chemicals and water, or chemicals in the form of dry powder or other highly concentrated media, that are delivered to the end user to make dialysis fluid used to perform haemodialysis and related therapies. ISO 13958:2014 is addressed to the manufacturer of such concentrates. </p><p>ISO 13958:2014 includes

36456,IS,,ISO 13959:2002,Water for haemodialysis and related therapies,Eaux pour hémodialyse et thérapies apparentées,2002-10-03,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[43699],['en'],4,<p>This International Standard specifies minimum requirements for water to be used in the preparation of concentrates and dialysing fluids for haemodialysis and haemodiafiltration.</p><p>This International Standard does not address the operation of water treatment equipment nor the final mixing of treated water with concentrates to produce the fluids used in such therapies. That operation is the sole responsibility of dialysis professionals.</p><p>This International Standard is not applicable to dialysing-fluid

43699,IS,,ISO 13959:2009,Water for haemodialysis and related therapies,Eau pour hémodialyse et thérapies apparentées,2009-04-15,2,['11.040.40'],ISO/TC 150/SC 2,9599,[36456],[61862],"['en','ru']",13,"<p>ISO 13959:2009 specifies minimum requirements for water to be used in the preparation of concentrates, dialysis fluids for haemodialysis, haemodiafiltration and haemofiltration and for the reprocessing of haemodialysers.</p><p>ISO 13959:2009 does not address the operation of water treatment equipment nor the final mixing of treated water with concentrates to produce the dialysis fluids used in such therapies. That operation is the sole responsibility of dialysis professionals.</p><p>ISO 13959:

61862,IS,,ISO 13959:2014,Water for haemodialysis and related therapies,Eau pour hémodialyse et thérapies apparentées,2014-03-17,3,['11.040.40'],ISO/TC 150/SC 2,9599,[43699],[67612],"['en','fr']",16,"<p>ISO 13959:2014 specifies minimum requirements for water to be used in haemodialysis and related therapies.</p><p>ISO 13959:2014 includes water to be used in the preparation of concentrates, dialysis fluids for haemodialysis, haemodiafiltration and haemofiltration, and for the reprocessing of haemodialysers.</p>"

5982,IS,,ISO 1396:1975,Vulcanized and unvulcanized compounded rubber — Determination of copper content — Zinc diethyldithiocarbamate photometric method,Mélanges à base de caoutchoucs vulcanisés et non vulcanisés — Dosage du cuivre — Méthode photométrique au diéthyldithiocarbamate de zinc,1975-05-01,1,['83.060'],ISO/TC 45,9599,,[15069],"['en','fr']",3,

35362,IS,,ISO 13960:2003,Cardiovascular implants and artificial organs — Plasmafilters,Implants cardio-vasculaires et organes artificiels — Filtres de plasma,2003-12-03,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[53691],['en'],9,"<p>ISO 13960:2003 specifies requirements for sterile, single-use plasmafilters, intended for use on humans.</p><p>ISO 13960:2003 is not applicable to the extracorporeal circuits used for plasmapheresis or other extracorporeal blood exchange devices, such as haemodialysers, haemodiafilters, haemofilters, haemoperfusion devices, vascular access devices, oxygenators or active medical devices. </p><p>ISO 13960:2003 does not address the replacement fluid.</p>"

53691,IS,,ISO 13960:2010,Cardiovascular implants and extracorporeal systems — Plasmafilters,Implants cardiovasculaires et systèmes extracorporels — Filtres pour plasma,2010-06-28,2,['11.040.40'],ISO/TC 150/SC 2,9599,[35362],[69845],"['en','ru']",9,"<p>ISO 13960:2010 specifies requirements for sterile, single use plasmafilters, intended for use on humans.</p>"

23534,IS,,ISO 13967:1998,Thermoplastics fittings — Determination of ring stiffness,Raccords en matières thermoplastiques — Détermination de la rigidité annulaire,1998-07-16,1,['23.040.45'],ISO/TC 138/SC 5,9599,,[50937],"['en','fr']",12,

23535,IS,,ISO 13968:1997,Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility,Systèmes de canalisations et de gaines en matières plastiques — Tubes en matières thermoplastiques — Détermination de la flexibilité annulaire,1997-10-02,1,['23.040.20'],ISO/TC 138/SC 5,9599,,"[43866,38767]","['en','fr']",3,

5983,IS,,ISO 1397:1975,Compounded rubber — Determination of manganese content — Sodium periodate photometric method,Mélanges à base de caoutchoucs — Dosage du manganèse — Méthode photométrique au periodate de sodium,1975-05-01,1,['83.060'],ISO/TC 45,9599,,[14660],"['en','fr']",5,

54396,IS,,ISO 13975:2012,Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems — Method by measurement of biogas production,Plastiques — Évaluation de la biodégradabilité anaérobie ultime des matériaux plastiques dans des systèmes de digestion de boue contrôlés — Méthode par mesurage de la production de biogaz,2012-05-04,1,['83.080.01'],ISO/TC 61/SC 14,9599,,[74992],['en'],13,"<p>ISO 13975:2012 specifies a method of evaluating the ultimate anaerobic biodegradability of plastic materials in a controlled anaerobic slurry digestion system with a solids concentration not exceeding 15 %, which is often found for the treatment

23539,IS,,ISO 13976:1998,Hot-rolled steel sheet in coils of structural quality and heavy thickness,Tôles fortes en acier de construction laminées à chaud en bobines,1998-07-02,1,['77.140.50'],ISO/TC 17/SC 12,9599,,"[40132,35542]","['en','fr']",8,

40132,IS,,ISO 13976:2005,Hot-rolled steel sheet in coils of structural quality and heavy thickness,Tôles fortes en acier de construction laminées à chaud en bobines,2005-02-15,2,['77.140.50'],ISO/TC 17/SC 12,9599,[23539],[67385],['en'],9,"ISO 13976:2005 applies to hot-rolled carbon/manganese steel sheet of structural quality,without the use of microalloying elements. The product is intended for structural purposes where particular mechanical properties are required. It is generally used in the delivered condition and is intended for bolted, riveted or welded structures. The product is produced on a wide strip mill.<p>This product is commonly produced in the range of thicknesses greater than

23570,IS,,ISO 13984:1999,Liquid hydrogen — Land vehicle fuelling system interface,Hydrogène liquide — Interface des systèmes de remplissage pour véhicules terrestres,1999-03-04,1,"['43.060.40','71.100.20']",ISO/TC 197,9599,,[86295],"['en','fr']",13,"<p>This International Standard specifies the characteristics of liquid hydrogen refuelling and dispensing systems on land</p><p>vehicles of all types in order to reduce the risk of fire and explosion during the refuelling procedure and thus to provide</p><p>a reasonable level of protection from loss of life and property.</p><p>This International Standard is applicable to the design and installation of liquid hydrogen (LH2) fuelling and dispensing

51261,IS,,ISO 13988:2008,"Passenger vehicle wheels — Clip balance weight and rim flange nomenclature, test procedures and performance requirements","Roues pour véhicules particuliers — Nomenclature des masselottes d'équilibrage clippées et des rebords de jantes, méthodes d'essai et exigences de performance",2008-07-17,1,['43.040.50'],ISO/TC 22/SC 33,9599,,[72675],"['en','fr']",12,<p>ISO 13988:2008 specifies procedures and minimum performance requirements for testing without tyres the retention of clip balance weights for use on wheels for passenger vehicles. It also specifies general features for configurations of clip balance weights and rim flanges for light alloy and steel wheels intended

5985,IS,,ISO 1399:1982,"Rubber, vulcanized — Determination of permeability to gases — Constant volume method",Caoutchouc vulcanisé — Détermination de la perméabilité aux gaz — Méthode à volume constant,1982-12-01,2,['83.060'],ISO/TC 45/SC 2,9599,,[7767],"['en','fr']",5,

23579,IS,,ISO 13990:1996,Textile machinery and accessories — Yarn feeders for knitting machines — Vocabulary,Matériel pour l'industrie textile — Fournisseurs de fil pour machines à tricoter — Vocabulaire,1996-12-26,1,"['59.120.40','01.040.59']",ISO/TC 72/SC 3,9599,,"[39190,39191,39189]","['en','fr']",13,<p>Defines basic terms relating to yarn feeders for knitting machines.</p>

23584,IS,,ISO 13992:1997,Alpine touring ski-bindings — Safety requirements and test methods,Fixations pour le ski alpin de randonnée — Prescriptions de sécurité et méthodes d'essai,1997-03-13,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[38627],"['en','fr']",18,

36324,IS,Amd,ISO 13992:1997/Amd 1:2004,Alpine touring ski-bindings — Safety requirements and test methods — Amendment 1,Fixations pour le ski alpin de randonnée — Prescriptions de sécurité et méthodes d'essai — Amendement 1,2004-02-12,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[38627],"['en','fr']",5,

38627,IS,,ISO 13992:2006,Alpine touring ski-bindings — Requirements and test methods,Fixations pour le ski alpin de randonnée — Exigences et méthodes d'essai,2006-02-23,2,['97.220.20'],ISO/TC 83/SC 4,9599,"[23584,36324]",[63445],"['en','fr']",37,"<p>ISO 13992:2006 specifies the main characteristics of touring ski-bindings and describes, as an example, the test methods A and B.</p><p>ISO 13992:2006 applies, in principle, to touring ski-bindings for alpine skiing for children, juniors and adults.</p>"

23585,IS,,ISO 13993:2001,Rental ski shop practice — Sampling and inspection of complete and incomplete alpine ski-binding-boot systems in rental applications,Pratique pour la location dans les commerces de matériel de ski —Échantillonnage et contrôle des ensembles complets ou incomplets ski/fixation/chaussure dans les applications de location,2001-09-27,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[71249],"['en','fr']",10,

22962,IS,,ISO 13994:1998,Clothing for protection against liquid chemicals — Determination of the resistance of protective clothing materials to penetration by liquids under pressure,Vêtements de protection contre les produits chimiques liquides — Détermination de la résistance des matériaux des vêtements de protection à la pénétration des liquides sous pression,1998-09-10,1,['13.340.10'],ISO/TC 94/SC 13,9599,,[39089],"['en','fr']",16,

22960,IS,,ISO 13997:1999,Protective clothing — Mechanical properties — Determination of resistance to cutting by sharp objects,Vêtements de protection — Propriétés mécaniques — Détermination de la résistance à la coupure par des objets tranchants,1999-09-02,1,['13.340.10'],ISO/TC 94/SC 13,9599,,[71111],"['en','fr']",9,

71111,IS,,ISO 13997:2023,Protective clothing — Mechanical properties — Determination of resistance to cutting by sharp objects,Vêtements de protection — Propriétés mécaniques — Détermination de la résistance à la coupure par des objets tranchants,2023-06-20,2,['13.340.10'],ISO/TC 94/SC 13,9599,[22960],[89073],"['en','fr']",23,"<p class='MsoBodyText' style='mso-layout-grid-align: none; text-autospace: none;'><span lang='EN-GB' style='mso-bidi-font-size: 12.0pt;'>This document specifies a tomodynamometer cut test method and related calculations, for use on materials and assemblies designed for protective clothing, including gloves. The test determines resistance to cutting by sharp edges, such

3953,IS,,ISO 140-1:1978,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 1: Requirements for laboratories,Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 1: Spécifications relatives aux laboratoires,1978-07-01,1,['91.120.20'],ISO/TC 43,9599,,[3954],"['en','fr']",2,

3954,IS,,ISO 140-1:1990,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 1: Requirements for laboratories,Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 1: Spécifications relatives aux laboratoires,1990-06-28,2,['91.120.20'],ISO/TC 43/SC 2,9599,[3953],[2174],"['en','fr']",4,

2174,IS,,ISO 140-1:1997,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 1: Requirements for laboratory test facilities with suppressed flanking transmission,Acoustique — Mesurage de l'isolement acoustique des immeubles et des éléments de construction — Partie 1: Spécifications relatives aux laboratoires sans transmissions latérales,1997-10-16,3,['91.120.20'],ISO/TC 43/SC 2,9599,[3954],"[42090,42087,42088,42092,42089]","['en','fr']",11,

34245,IS,Amd,ISO 140-1:1997/Amd 1:2004,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 1: Requirements for laboratory test facilities with suppressed flanking transmission — Amendment 1: Specific requirements on the frame of the test opening for lightweight twin leaf partitions,Acoustique — Mesurage de l'isolement acoustique des immeubles et des éléments de construction — Partie 1: Spécifications relatives aux laboratoires sans transmissions latérales — Amendement 1: Exigences particulières applicables au cadre de l'ouverture d'essai pour cloisons à doubles parements légers,2004-12-01,3,['91.120.20'],ISO/TC 43/SC 2,9599,,"[42090,42087,42088,42092,4208

3966,IS,,ISO 140-10:1991,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 10: Laboratory measurement of airborne sound insulation of small building elements,Acoustique — Mesurage de l'isolation acoustique des immeubles et des éléments de construction — Partie 10: Mesurage en laboratoire de l'isolation au bruit aérien de petits éléments de construction,1991-12-16,1,"['91.060.01','91.120.20']",ISO/TC 43/SC 2,9599,,"[42090,42087,42088,42092,42089]","['en','fr']",7,"<p>Applies to building elements, excluding windows and doors, with an area of less than 1 m^2 and which transmit sound between two adjacent rooms or between one room and the open air independen

35600,IS,,ISO 140-11:2005,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors,Acoustique — Mesurage de l'isolement acoustique des immeubles et des éléments de construction — Partie 11: Mesurage en laboratoire de la réduction de la transmission des bruits de choc par les revêtements de sol sur les planchers de référence légers,2005-05-18,1,['91.120.20'],ISO/TC 43/SC 2,9599,,"[42090,42087,42088,42092,42089]","['en','fr']",30,"<p>ISO 140-11:2005 specifies methods for measuring the acoustic properties of floor coverings from the viewpoin

25041,IS,,ISO 140-12:2000,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 12: Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor,Acoustique — Mesurage de l'isolement acoustique des immeubles et des éléments de construction — Partie 12: Mesurage en laboratoire de la transmission latérale entre deux pièces des bruits aériens et des bruits de choc par un plancher surélevé,2000-02-03,1,['91.120.20'],ISO/TC 43/SC 2,9599,,[35004],"['en','fr']",12,