Withdrawn and superseded ISO standards — page 37 of 246

22425,IS,,ISO 13623:2000,Petroleum and natural gas industries — Pipeline transportation systems,Industries du pétrole et du gaz naturel — Systèmes de transport par conduites,2000-04-13,1,['75.200'],ISO/TC 67/SC 2,9599,,[44497],"['en','fr']",86,

44497,IS,,ISO 13623:2009,Petroleum and natural gas industries — Pipeline transportation systems,Industries du pétrole et du gaz naturel — Systèmes de transport par conduites,2009-06-11,2,['75.200'],ISO/TC 67/SC 2,9599,[22425],[61251],"['en','ru']",84,"<p>ISO 13623:2009 specifies requirements and gives recommendations for the design, materials, construction, testing, operation, maintenance and abandonment of pipeline systems used for transportation in the petroleum and natural gas industries.</p><p>ISO 13623:2009 applies to pipeline systems on land and offshore, connecting wells, production plants, process plants, refineries and storage facilities, including any section of a pipeline construc

22430,IS,,ISO 13628-1:1999,Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations,Industries du pétrole et du gaz naturel — Conception et exploitation des systèmes de production immergés — Partie 1: Exigences générales et recommandations,1999-03-11,1,['75.180.10'],ISO/TC 67/SC 4,9599,,[36458],['en'],128,"<p>La présente partie de l'ISO 13628 constitue un document de base régissant d'autres normes de sous-systèmes qui font partie d'un système de production immergé.Le système de production immergé complet comprend plusieurs sous-systèmes nécessaires pour produire des hydrocarbures provenant d'un ou de plusieurs

36458,IS,,ISO 13628-1:2005,Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations,Industries du pétrole et du gaz naturel — Conception et exploitation des systèmes de production immergés — Partie 1: Exigences générales et recommandations,2005-11-15,2,['75.180.10'],ISO/TC 67/SC 4,9599,[22430],[86664],"['en','fr']",232,"ISO 13628-1:2005 provides general requirements and overall recommendations for development of complete subsea production systems, from the design phase to decommissioning and abandonment. ISO 13628-1:2005 is intended as an umbrella document to govern other parts of ISO 13628 dealing with more d

45449,IS,Amd,ISO 13628-1:2005/Amd 1:2010,Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations — Amendment 1: Revised Clause 6,Industries du pétrole et du gaz naturel — Conception et exploitation des systèmes de production immergés — Partie 1: Exigences générales et recommandations — Amendement 1: Révision de l'Article 6,2010-08-11,2,['75.180.10'],ISO/TC 67/SC 4,9599,,[86664],"['en','fr','ru']",12,

38614,IS,,ISO 13628-11:2007,Petroleum and natural gas industries — Design and operation of subsea production systems — Part 11: Flexible pipe systems for subsea and marine applications,Industries du pétrole et du gaz naturel — Conception et exploitation des systèmes de production immergés — Partie 11: Systèmes de canalisations flexibles pour applications sous-marines et en milieu marin,2007-09-13,1,['75.180.10'],ISO/TC 67/SC 4,9599,[18482],[87409],"['en','fr','ru']",213,"<p>ISO 13628-11:2007 provides guidelines for the design, analysis, manufacture, testing, installation and operation of flexible pipes and flexible pipe systems for onshore, subsea and marine applications. ISO 13628-11:2007 s

51685,IS,Cor,ISO 13628-11:2007/Cor 1:2008,Petroleum and natural gas industries — Design and operation of subsea production systems — Part 11: Flexible pipe systems for subsea and marine applications — Technical Corrigendum 1,Industries du pétrole et du gaz naturel — Conception et exploitation des systèmes de production immergés — Partie 11: Systèmes de canalisations flexibles pour applications sous-marines et en milieu marin — Rectificatif technique 1,2008-06-10,1,['75.180.10'],ISO/TC 67/SC 4,9599,,[87409],"['en','ru']",2,

45993,IS,,ISO 13628-15:2011,Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds,Industries du pétrole et du gaz naturel — Conception et exploitation des systèmes de production immergés — Partie 15: Structures immergées et manifolds,2011-09-15,1,['75.180.10'],ISO/TC 67/SC 4,9599,,[87410],"['en','fr']",63,"<div id='MathJax_Message' style='display: none;'></div><p>ISO 13628-15:2011 addresses recommendations for subsea structures and manifolds, within the frameworks set forth by recognized and accepted industry specifications and standards. As such, it does not supersede or eliminate any requirement imposed by any ot

24207,IS,,ISO 13628-2:2000,Petroleum and natural gas industries — Design and operation of subsea production systems — Part 2: Flexible pipe systems for subsea and marine applications,Industries du pétrole et du gaz naturel — Conception et exploitation des systèmes de production immergés — Partie 2: Systèmes de canalisations flexibles pour applications sous-marines et en milieu marin,2000-12-21,1,['75.180.10'],ISO/TC 67/SC 4,9599,,[38613],['en'],68,"<p>La présente partie de l'ISO 13628 définit les exigences minimales applicables à la conception, la sélection des matériaux, la fabrication, le test, le marquage et l'emballage des liaisons flexibles, ainsi que les exigences techniques applicable

22431,IS,,ISO 13628-4:1999,Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment,Industries du pétrole et du gaz naturel — Conception et fonctionnement des systèmes de production immergés — Partie 4: Équipements immergés de tête de puits et tête de production,1999-07-01,1,['75.180.10'],ISO/TC 67/SC 4,9599,,[38563],['en'],161,"<p>La présente partie de l'ISO 13628 s'applique aux éléments suivants : tête de puits immergée, tête de puits de conduite de boue classique, forage par tête de puits de conduite de boue, têtes de production immergées conventionnelles et horizontales. Elle concerne également les outils associ

38563,IS,,ISO 13628-4:2010,Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment,Industries du pétrole et du gaz naturel — Conception et exploitation des systèmes de production immergés — Partie 4: Équipements immergés de tête de puits et tête de production,2010-12-13,2,['75.180.10'],ISO/TC 67/SC 4,9599,[22431],[87418],"['en','fr','ru']",251,"<div id='MathJax_Message' style='display: none;'></div><p>ISO 13628-4:2010 provides specifications for subsea wellheads, mudline wellheads, drill-through mudline wellheads and both vertical and horizontal subsea trees. It specifies the associated tooling necessary to handle,

59711,IS,Cor,ISO 13628-4:2010/Cor 1:2011,Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment — Technical Corrigendum 1,Industries du pétrole et du gaz naturel — Conception et exploitation des systèmes de production immergés — Partie 4: Équipements immergés de tête de puits et tête de production — Rectificatif technique 1,2011-06-07,2,['75.180.10'],ISO/TC 67/SC 4,9599,,[87418],"['en','ru']",4,

24208,IS,,ISO 13628-5:2002,Petroleum and natural gas industries — Design and operation of subsea production systems — Part 5: Subsea umbilicals,Industries du pétrole et du gaz naturel — Conception et exploitation des systèmes de production immergés — Partie 5: Faisceaux de câbles immergés,2002-10-22,1,['75.180.10'],ISO/TC 67/SC 4,9599,,[41322],['en'],103,"<p>ISO 13628-5:2002 specifies requirements and gives recommendations for the design, material selection, manufacture, design verification, testing, installation and operation of subsea control systems, chemical injection, gas lift, utility and service umbilicals and associated ancillary equipment for the petroleum and natural gas industries

24209,IS,,ISO 13628-6:2000,Petroleum and natural gas industries — Design and operation of subsea production systems — Part 6: Subsea production control systems,Industries du pétrole et du gaz naturel — Conception et fonctionnement des systèmes de production immergés — Partie 6: Commandes pour équipements immergés,2000-03-30,1,['75.180.10'],ISO/TC 67/SC 4,9599,,[35530],['en'],55,

35530,IS,,ISO 13628-6:2006,Petroleum and natural gas industries — Design and operation of subsea production systems — Part 6: Subsea production control systems,Industries du pétrole et du gaz naturel — Conception et exploitation des systèmes de production immergés — Partie 6: Commandes pour équipements immergés,2006-05-10,2,['75.180.10'],ISO/TC 67/SC 4,9599,[24209],[54136],"['en','fr']",123,"<p>ISO 13628-6:2006 is applicable to design, fabrication, testing, installation and operation of subsea production control systems.</p><p>ISO 13628-6:2006 covers surface control system equipment, subsea-installed control system equipment and control fluids. This equipment is utilized for control of subse

24210,IS,,ISO 13628-7:2005,Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems,Industries du pétrole et du gaz naturel — Conception et exploitation des systèmes de production immergés — Partie 7: Systèmes de liaison surface/fond de mer pour complétion/reconditionnement,2005-11-11,1,['75.180.10'],ISO/TC 67/SC 4,9599,,[87408],"['en','fr','ru']",242,"<p>ISO 13628-7:2005 gives requirements and recommendations for the design, analysis, materials, fabrication, testing and operation of subsea completion/workover (C/WO) riser systems run from a floating vessel.</p><p>It is applicable to all new C/WO riser systems and ma

54097,IS,,ISO 13629-1:2012,Textiles — Determination of antifungal activity of textile products — Part 1: Luminescence method,Textiles — Détermination de l'activité antifongique des produits textiles — Partie 1: Méthode par luminescence,2012-08-07,1,['59.080.01'],ISO/TC 38,9599,,[87821],"['en','fr']",19,"<p>ISO 13629-1:2012 specifies a test method for the quantitative determination of the antifungal activity by measuring the intensity of luminescence produced by an enzymatic reaction [adenosine triphosphate (ATP) method].</p><p>ISO 13629-1:2012 is applicable to various kinds of textile products, such as fibres, yarns, fabrics, clothing, bedclothes, home furnishings and other miscellaneous goo

22444,IS,,ISO 13638:1996,Building construction — Sealants — Determination of resistance to prolonged exposure to water,Construction immobilière — Mastics — Détermination de la résistance à une immersion prolongée dans l'eau,1996-12-12,1,['91.100.50'],ISO/TC 59/SC 8,9599,,[77222],"['en','fr']",5,"<p>Describes a method for the determination of the ability of sealants to resist differing degrees of exposure to water under conditions of service. Assesses for specified duration of time the ability of the sealant to fulfill its essential functions, principally to withstand joint movements.</p>"

22446,IS,,ISO 13640:1999,Building construction — Jointing products — Specifications for test substrates,Construction immobilière — Matériaux pour joints — Prescriptions relatives aux supports d'essais,1999-12-16,1,['91.100.50'],ISO/TC 59/SC 8,9599,,"[67989,57424]","['en','fr']",3,

67989,IS,,ISO 13640:2018,Buildings and civil engineering works — Sealants — Specifications for test substrates,Bâtiments et ouvrages de génie civil — Mastics — Prescriptions relatives aux supports d'essais,2018-07-12,2,['91.100.50'],ISO/TC 59/SC 8,9599,[22446],[91162],"['en','fr']",5,"<p>This document specifies the procedures for producing substrates of mortar, glass and anodized aluminium used for testing sealants.</p><p>The purpose of these requirements is to ensure the reproducibility of the standardized tests conducted on sealants through the precise definition of both the composition and the method of preparation of the test substrates.</p><p>The substrates defined in this document are

54103,IS,,ISO 13643-1:2013,"Ships and marine technology — Manoeuvring of ships — Part 1: General concepts, quantities and test conditions","Navires et technologie maritime — Manoeuvres des navires — Partie 1: Notions générales, grandeurs et conditions d'essai",2013-06-19,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[71481],['en'],39,"<p>ISO 13643-1:2013 applies to manoeuvring tests with surface ships, submarines, and models.</p><p>ISO 13643-1:2013 defines concepts, symbols, and test conditions constituting general fundamentals which are to be applied for the description and determination of certain ship manoeuvring characteristics together with the respective test-specific physical quantities contain

54509,IS,,ISO 13643-2:2013,Ships and marine technology — Manoeuvring of ships — Part 2: Turning and yaw checking,Navires et technologie maritime — Manoeuvres des navires — Partie 2: Giration et contrôle de lacet,2013-06-19,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[71482],['en'],23,"<p>ISO 13643-2:2013 defines symbols and terms and provides guidelines for the conduct of tests to give evidences about the turning ability and the yaw containment of surface ships, submarines, and models. It is intended that it be read in conjunction with ISO 13643-1:2013.</p>"

55793,IS,,ISO 13643-3:2013,Ships and marine technology — Manoeuvring of ships — Part 3: Yaw stability and steering,Navires et technologie maritime — Manoeuvres des navires — Partie 3: Stabilité en lacet et pilotage,2013-06-19,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[71483],['en'],20,"<p>ISO 13643-3:2013 defines symbols and terms and provides guidelines for the conduct of tests to give evidence about the yaw stability and steering of surface ships, submarines, and models. It is meant to be read in conjunction with ISO 13643-1:2013.</p>"

55794,IS,,ISO 13643-4:2013,"Ships and marine technology — Manoeuvring of ships — Part 4: Stopping, acceleration, traversing","Navires et technologie maritime — Manoeuvres des navires — Partie 4: Arrêt, accélération, déplacement",2013-06-19,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[71484],['en'],9,"<p>ISO 13643-4:2013 defines symbols and terms and provides guidelines for the conduct of tests to give evidence about the stopping, acceleration, and traversing of surface ships, submarines, and models. It is intended to be read in conjunction with ISO 13643-1:2013.</p>"

57482,IS,,ISO 13643-5:2013,Ships and marine technology — Manoeuvring of ships — Part 5: Submarine specials,Navires et technologie maritime — Manoeuvres des navires — Partie 5: Spécificités des sous-marins,2013-06-19,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[71485],['en'],22,

57483,IS,,ISO 13643-6:2013,Ships and marine technology — Manoeuvring of ships — Part 6: Model test specials,Navires et technologie maritime — Manoeuvres des navires — Partie 6: Spécificités des essais sur modéle,2013-06-19,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[71486],['en'],40,"<p>ISO 13643-6:2013 defines symbols and terms and provides guidelines for the conduct of tests to determine the hydrodynamic forces and moments due to prescribed motions under a planar-motion, a circular-motion, or an oblique towing or flow system for models of surface ships and submarines. It also defines symbols and terms and provides guidelines for the conduct of tests in a wind tunnel. It is intended to be read in

22472,IS,,ISO 13651:1996,Plastics — Epoxy resins and related materials — Determination of total saponifiable chlorine,Plastiques — Résines époxydes et matières apparentées — Dosage du chlore saponifiable total,1996-12-19,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[34633],"['en','fr']",5,<p>Gives a method for the determination of the total saponifiable chlorine contained in epoxy resins and related materials. The amount of chlorine measured by the method includes saponifiable organic chlorine and inorganic chlorine.</p>

21217,IS,,ISO 13653:1996,Optics and optical instruments — General optical test methods — Measurement of relative irradiance in the image field,Optique et instruments d'optique — Méthodes générales d'essai optique — Méthode de mesurage de l'éclairement énergétique relatif dans le champ image,1996-12-12,1,['17.180.01'],ISO/TC 172/SC 1,9599,,[72597],"['en','fr']",16,"<p>Applies to optical imaging systems in the optical spectral region from 100 nm to 1 m. Telescopic systems are also included. The standard refers to the relative irradiance in the image field, but it is also applicable to determination of the relative radiant power.</p>"

22476,IS,,ISO 13655:1996,Graphic technology — Spectral measurement and colorimetric computation for graphic arts images,Technologie graphique — Mesurage spectral et calcul colorimétrique relatifs aux images dans les arts graphiques,1996-10-10,1,['37.100.01'],ISO/TC 130,9599,,[39877],['en'],18,

39877,IS,,ISO 13655:2009,Graphic technology — Spectral measurement and colorimetric computation for graphic arts images,Technologie graphique — Mesurage spectral et calcul colorimétrique relatifs aux images dans les arts graphiques,2009-12-07,2,['37.100.01'],ISO/TC 130,9599,[22476],[65430],['en'],37,"<p>ISO 13655:2009 establishes procedures for the measurements and colorimetrical computations appropriate to objects that reflect, transmit, or self-illuminate, including flat-panel displays. It also establishes procedures for computation of colorimetric parameters for graphic arts images. Graphic arts includes, but is not limited to, the preparation of material for, and volume production by, pr

22040,IS,,ISO 13663:1995,Welded steel tubes for pressure purposes — Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections,Tubes en acier soudés pour service sous pression — Contrôle par ultrasons de la zone adjacente au cordon de soudure pour la détection des dédoublures de laminage,1995-11-23,1,"['23.040.10','77.140.75','25.160.40']",ISO/TC 17/SC 19,9599,,[44669],"['en','fr']",4,"<p>Contains requirements for ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for pressure purposes, for the detection of laminar imperfections. No lower limit to tube thickness is specified.</p>"

22041,IS,,ISO 13664:1997,Seamless and welded steel tubes for pressure purposes — Magnetic particle inspection of the tube ends for the detection of laminar imperfections,Tubes en acier sans soudure et soudés pour service sous pression — Contrôle par magnétoscopie des extrémités des tubes pour la détection des dédoublures de laminage,1997-05-01,1,"['77.040.20','23.040.10','77.140.75']",ISO/TC 17/SC 19,9599,,[44677],"['en','fr']",3,

22042,IS,,ISO 13665:1997,Seamless and welded steel tubes for pressure purposes — Magnetic particle inspection of the tube body for the detection of surface imperfections,Tubes en acier sans soudure et soudés pour service sous pression — Contrôle par magnétoscopie du corps des tubes pour la détection des imperfections de surface,1997-05-01,1,"['77.040.20','23.040.10','77.140.75']",ISO/TC 17/SC 19,9599,,[44677],"['en','fr']",5,

22503,IS,,ISO 13666:1998,Ophthalmic optics — Spectacle lenses — Vocabulary,Optique ophtalmique — Verres de lunettes — Vocabulaire,1998-08-27,1,"['11.040.70','01.040.11']",ISO/TC 172/SC 7,9599,,[55784],"['en','fr']",59,

55784,IS,,ISO 13666:2012,Ophthalmic optics — Spectacle lenses — Vocabulary,Optique ophtalmique — Verres de lunettes — Vocabulaire,2012-10-22,2,"['11.040.70','01.040.11']",ISO/TC 172/SC 7,9599,"[45409,22503]",[68450],"['de','en','fr','ru']",167,"<p>ISO 13666:2011 defines basic terms relating to ophthalmic optics, specifically to semi-finished spectacle lens blanks, finished spectacle lenses and fitting purposes.</p><p>Terms relating to processes and materials for fabrication and surface treatment (other than some specific terms relating to coatings), and terms relating to defects in materials and after optical processing, are given in ISO 9802.</p>"

33402,IS,,ISO 13674-1:2003,Road vehicles — Test method for the quantification of on-centre handling — Part 1: Weave test,Véhicules routiers — Méthode d'essai pour la quantification du centrage — Partie 1: Essai en petite sinusoïde au volant,2003-03-11,1,['43.020'],ISO/TC 22,9599,,[54302],"['en','fr']",9,"<p>SO 13674-1:2003 specifies a test schedule that addresses a particular aspect of the on-centre handling characteristics of a vehicle: the weave test. It is applicable to passenger cars in accordance with ISO 3833, and to light trucks.</p>"

54302,IS,,ISO 13674-1:2010,Road vehicles — Test method for the quantification of on-centre handling — Part 1: Weave test,Véhicules routiers — Méthode d'essai pour la quantification du centrage — Partie 1: Essai en petite sinusoïde au volant,2010-05-06,2,['43.020'],ISO/TC 22/SC 33,9599,[33402],[83233],['en'],9,"<p>ISO 13674-1:2010 specifies a test schedule that addresses a particular aspect of the on-centre handling characteristics of a vehicle: the weave test. It is applicable to passenger cars in accordance with ISO 3833, and to light trucks.</p>"

41146,IS,,ISO 13674-2:2006,Road vehicles — Test method for the quantification of on-centre handling — Part 2: Transition test,Véhicules routiers — Méthode d'essai pour la quantification du centrage — Partie 2: Essai de la transition,2006-12-01,1,['43.020'],ISO/TC 22/SC 33,9599,,[60523],"['en','fr']",9,"<p>ISO 13674-2:2006 specifies a test schedule that addresses the transition test, a particular aspect of the on-centre handling characteristics of a vehicle. It is applicable to passenger cars in accordance with ISO 3833, and to light trucks.</p>"

22601,IS,,ISO 13678:2000,"Petroleum and natural gas industries — Evaluation and testing of thread compounds for use with casing, tubing and line pipe","Industries du pétrole et du gaz naturel — Évaluation et essais des composés pour filetage à utiliser avec les tubages, les tubes de production et les tubes de canalisation",2000-11-23,1,['75.180.10'],ISO/TC 67/SC 5,9599,,[41952],"['en','fr']",35,

43312,IS,Cor,ISO 13678:2000/Cor 1:2005,"Petroleum and natural gas industries — Evaluation and testing of thread compounds for use with casing, tubing and line pipe — Technical Corrigendum 1","Industries du pétrole et du gaz naturel — Évaluation et essais des composés pour filetage à utiliser avec les tubages, les tubes de production et les tubes de canalisation — Rectificatif technique 1",2005-10-27,1,['75.180.10'],ISO/TC 67/SC 5,9599,,[41952],"['en','fr']",2,

41952,IS,,ISO 13678:2009,"Petroleum and natural gas industries — Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements","Industries du pétrole et du gaz naturel — Évaluation et essais des graisses pour filetage utilisées pour les tubes de cuvelage, les tubes de production, les tubes de conduites et les éléments de garnitures de forage",2009-04-30,2,['75.180.10'],ISO/TC 67/SC 5,9599,"[22601,43312]",[57057],"['en','fr']",47,"<p>ISO 13678:2009 provides requirements, recommendations and methods for the testing of thread compounds intended for use on ISO/API thread forms, as well as proprietary casing, tubing, line pipe and drill stem elements w

22603,IS,,ISO 13679:2002,Petroleum and natural gas industries — Procedures for testing casing and tubing connections,Industries du pétrole et du gaz naturel — Procédures de test des connexions pour tubes de cuvelage et de production,2002-12-13,1,"['75.200','75.180.10']",ISO/TC 67/SC 5,9599,,[75965],"['en','fr']",139,"<p>ISO 13679:2002 establishes minimum design verification testing procedures and acceptance criteria for casing and tubing connections for the oil and natural gas industries. These physical tests are part of a design verification process and provide objective evidence that the connection conforms to the manufacturer's claimed test load envelope and limit loads.</p><p>It categori

22604,IS,,ISO 13680:2000,"Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions","Industries du pétrole et du gaz naturel — Tubes sans soudure en acier allié résistant à la corrosion utilisés comme tubes de cuvelage, tubes de production et tubes-ébauches pour manchons — Conditions techniques de livraison",2000-06-29,1,"['77.140.75','75.180.10']",ISO/TC 67/SC 5,9599,,"[39117,40663]","['en','fr']",34,

37579,IS,Cor,ISO 13680:2000/Cor 1:2002,"Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions — Technical Corrigendum 1","Industries du pétrole et du gaz naturel — Tubes sans soudure en acier allié résistant à la corrosion utilisés comme tubes de cuvelage, tubes de production et tubes-ébauches pour manchons — Conditions techniques de livraison — Rectificatif technique 1",2002-11-15,1,"['77.140.75','75.180.10']",ISO/TC 67/SC 5,9599,,"[39117,40663]",['fr'],,

40515,IS,Cor,ISO 13680:2000/Cor 2:2004,"Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions — Technical Corrigendum 2","Industries du pétrole et du gaz naturel — Tubes sans soudure en acier allié résistant à la corrosion utilisés comme tubes de cuvelage, tubes de production et tubes-ébauches pour manchons — Conditions techniques de livraison — Rectificatif technique 2",2004-04-26,1,"['77.140.75','75.180.10']",ISO/TC 67/SC 5,9599,,[40663],"['en','fr']",2,

40663,IS,,ISO 13680:2008,"Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions","Industries du pétrole et du gaz naturel — Tubes sans soudure en acier allié résistant à la corrosion utilisés comme tubes de cuvelage, tubes de production et tubes-ébauches pour manchons — Conditions techniques de livraison",2008-10-15,2,"['77.140.75','75.180.10']",ISO/TC 67/SC 5,9599,"[40515,22604,37579]",[56098],['en'],84,"<p>ISO 13680:2008 specifies the technical delivery conditions for corrosion-resistant alloy seamless tubulars for casing, tubing and coupling stock for two product specification levels:</p

56098,IS,,ISO 13680:2010,"Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions","Industries du pétrole et du gaz naturel — Tubes sans soudure en acier allié résistant à la corrosion utilisés comme tubes de cuvelage, tubes de production et tubes-ébauches pour manchons — Conditions techniques de livraison",2010-09-06,3,"['77.140.75','75.180.10']",ISO/TC 67/SC 5,9599,[40663],[77525],"['en','fr']",89,"<p>ISO 13680:2010 specifies the technical delivery conditions for corrosion-resistant alloy seamless tubulars for casing, tubing and coupling stock for two product specification levels: PSL-1, wh

77525,IS,,ISO 13680:2020,"Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material — Technical delivery conditions","Industries du pétrole et du gaz naturel — Produits tubulaires sans soudure en acier allié résistant à la corrosion utilisés comme tubes de cuvelage, tubes de production, tubes-ébauches pour manchons et matériau pour accessoires — Conditions techniques de livraison",2020-05-19,4,"['77.140.75','75.180.10']",ISO/TC 67/SC 5,9599,[56098],[87722],['en'],125,"<p>This document specifies the technical delivery conditions for corrosion-resistant alloy seamless tubular products for casing,

21691,IS,,ISO 13681:1995,Meat and meat products — Enumeration of yeasts and moulds — Colony-count technique,Viandes et produits à base de viande — Dénombrement des levures et moisissures — Technique par comptage des colonies,1995-12-14,1,['07.100.30'],ISO/TC 34/SC 9,9599,,"[38276,38275]","['en','fr']",6,"<p>Describes a method for the enumeration of yeasts and moulds of meat and meat products, including poultry, by means of the colony-count technique after aerobic incubation between 20 ° and 25 °C for 3, 4 or 5 days.</p>"

22270,IS,,ISO 13683:1997,Sterilization of health care products — Requirements for validation and routine control of moist heat sterilization in health care facilities,Stérilisation des produits de santé — Exigences pour la validation et le contrôle pratique de la stérilisation en chaleur humide dans les locaux de soins de santé,1997-05-22,1,['11.080.01'],ISO/TC 198,9599,,"[31459,43187]","['en','fr']",33,

22614,IS,,ISO 13686:1998,Natural gas — Quality designation,Gaz naturel — Désignation de la qualité,1998-04-30,1,['75.060'],ISO/TC 193,9599,,[53058],"['en','fr']",48,

54284,IS,,ISO 13687:2014,Tourism and related services — Yacht harbours — Minimum requirements,Tourisme et services connexes — Ports de plaisance — Exigences minimales,2014-10-15,1,"['03.200.99','03.080.30']",ISO/TC 228,9599,,"[67390,71286,67392]","['en','fr']",10,"<p>ISO 13687:2014 establishes minimum requirements for commercial and non-commercial harbours for leisure boats and yachts to deliver services to the boating community, excluding the standardization of sports activities. The scope does not cover specifics of boat yards, dry stacks, dry-docking areas, dry storages, fuel stations, and nearby beaches.</p><p>Compliance with ISO 13687:2014 does not guarantee total safety or total freedo

22630,IS,,ISO 13688:1998,Protective clothing — General requirements,Vêtements de protection — Exigences générales,1998-07-02,1,['13.340.10'],ISO/TC 94/SC 13,9599,,[51449],"['en','fr']",11,

21322,IS,,ISO 13689:2001,Refrigerated light hydrocarbon fluids — Measurement of liquid levels in tanks containing liquefied gases — Microwave-type level gauge,Hydrocarbures légers réfrigérés — Mesurage des niveaux de liquide dans les réservoirs contenant des gaz liquéfiés — Jauges de niveau à micro-ondes,2001-04-12,1,['75.180.30'],ISO/TC 28/SC 5,9599,,"[38592,42949]","['en','fr']",7,

22637,IS,,ISO 13690:1999,"Cereals, pulses and milled products — Sampling of static batches","Céréales, légumineuses et produits de mouture — Échantillonnage des lots statiques",1999-10-07,1,['67.060'],ISO/TC 34/SC 4,9599,"[5374,6965,5372]","[42165,41219]","['en','fr']",18,

22264,IS,,ISO 13694:2000,Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power (energy) density distribution,Optique et instruments d'optique — Lasers et équipements associés aux lasers — Méthodes d'essai de distribution de la densité de puissance (d'énergie) du faisceau laser,2000-04-06,1,['31.260'],ISO/TC 172/SC 9,9599,,[61832],"['en','fr']",16,

43168,IS,Cor,ISO 13694:2000/Cor 1:2005,Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power (energy) density distribution — Technical Corrigendum 1,Optique et instruments d'optique — Lasers et équipements associés aux lasers — Méthodes d'essai de distribution de la densité de puissance (d'énergie) du faisceau laser — Rectificatif technique 1,2005-10-31,1,['31.260'],ISO/TC 172/SC 9,9599,,[61832],"['en','fr']",2,

61832,IS,,ISO 13694:2015,Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power (energy) density distribution,Optique et photonique — Lasers et équipements associés aux lasers — Méthodes d'essai de distribution de la densité de puissance (d'énergie) du faisceau laser,2015-11-16,2,['31.260'],ISO/TC 172/SC 9,9599,"[22264,43168]",[72945],"['en','fr']",15,<p>ISO 13694:2015 specifies methods by which the measurement of power [energy] density distribution is made and defines parameters for the characterization of the spatial properties of laser power [energy] density distribution functions at a given plane.</p><p>The methods given in this International Standa

72945,IS,,ISO 13694:2018,Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power (energy) density distribution,Optique et photonique — Lasers et équipements associés aux lasers — Méthodes d'essai de distribution de la densité de puissance (d'énergie) du faisceau laser,2018-11-02,3,['31.260'],ISO/TC 172/SC 9,9599,[61832],[87911],"['en','fr']",16,"<p>This document specifies methods by which the measurement of power (energy) density distribution is made and defines parameters for the characterization of the spatial properties of laser power (energy)density distribution functions at a given plane.</p><p>The methods given in this document are intended to be u

35640,IS,,ISO 13695:2004,Optics and photonics — Lasers and laser-related equipment — Test methods for the spectral characteristics of lasers,Optique et photonique — Lasers et équipement associé aux lasers — Méthodes d'essai des caractéristiques spectrales des lasers,2004-06-07,1,"['37.020','31.260']",ISO/TC 172/SC 9,9599,,[87908],"['en','fr']",25,"<p>ISO 13695:2004 specifies methods by which the spectral characteristics such as wavelength, bandwidth, spectral distribution and wavelength stability of a laser beam can be measured. ISO 13695:2004 is applicable to both continuous wave (cw) and pulsed laser beams. The dependence of the spectral characteristics of a laser on its operating conditio

22670,IS,,ISO 13696:2002,Optics and optical instruments — Test methods for radiation scattered by optical components,Optique et instruments d'optique — Méthodes d'essai du rayonnement diffusé par les composants optiques,2002-08-22,1,['31.260'],ISO/TC 172/SC 9,9599,,[72956],"['en','fr']",26,"<p>ISO 13696:2002 specifies procedures for the determination of the total scattering by coated and uncoated optical surfaces. Procedures are given for measuring the contributions of the forward scattering and backward scattering to the total scattering of an optical component.</p><p>ISO 13696:2002 applies to coated and uncoated optical components with optical surfaces that have a radius of curvature of mo

3950,IS,,ISO 137:1975,Wool — Determination of fibre diameter — Projection microscope method,Laine — Détermination du diamètre des fibres — Méthode du microscope à projection,1975-02-01,1,['59.060.10'],ISO/TC 38/SC 23,9599,,[61688],"['en','fr']",7,<p>Projection on a screen of the magnified images of the profiles of wool fibre pieces and measurement of their width by means of a graduated scale. The operating technique assures a random sampling of the fibres to be measured. Suitable for wool fibres in any form and also for other fibres of reasonably circular cross-section.</p>

22675,IS,,ISO 13702:1999,Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines,Industries du pétrole et du gaz naturel — Contrôle et atténuation des feux et des explosions dans les installations en mer — Exigences et lignes directrices,1999-03-18,1,['75.180.10'],ISO/TC 67/SC 6,9599,,[57416],"['en','fr']",56,

57416,IS,,ISO 13702:2015,Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines,Industries du pétrole et du gaz naturel — Contrôle et atténuation des feux et des explosions dans les installations en mer — Exigences et lignes directrices,2015-07-16,2,['75.180.10'],ISO/TC 67/SC 6,9599,[22675],[82438],['en'],60,"<p>ISO 13702:2015 describes the objectives and functional requirements for the control and mitigation of fires and explosions on offshore installations used for the development of hydrocarbon resources.</p><p>ISO 13702:2015 is applicable to the following:</p><ul><li>fixed offshore structure

35473,IS,,ISO 13704:2001,Petroleum and natural gas industries — Calculation of heater-tube thickness in petroleum refineries,Industries du pétrole et du gaz naturel — Calcul de l'épaisseur des tubes de fours de raffineries de pétrole,2001-12-13,1,['75.180.20'],ISO/TC 67/SC 6,9599,,[38662],['en'],138,

39918,IS,Cor,ISO 13704:2001/Cor 1:2004,Petroleum and natural gas industries — Calculation of heater-tube thickness in petroleum refineries — Technical Corrigendum 1,Industries du pétrole et du gaz naturel — Calcul de l'épaisseur des tubes de fours de raffineries de pétrole — Rectificatif technique 1,2004-01-19,1,['75.180.20'],ISO/TC 67/SC 6,9599,,[38662],['en'],2,

38662,IS,,ISO 13704:2007,"Petroleum, petrochemical and natural gas industries — Calculation of heater-tube thickness in petroleum refineries","Industries du pétrole, de la pétrochimie et du gaz naturel — Calcul de l'épaisseur des tubes de fours de raffineries de pétrole",2007-11-15,2,['75.180.20'],ISO/TC 67/SC 6,9599,"[39918,35473]",[83005],"['en','fr']",105,"<p>ISO 13704:2007 specifies the requirements and gives recommendations for the procedures and design criteria used for calculating the required wall thickness of new tubes and associated component fittings for petroleum-refinery heaters. These procedures are appropriate for designing tubes for service in both corrosive and non-corrosive

51686,IS,Cor,ISO 13704:2007/Cor 1:2008,"Petroleum, petrochemical and natural gas industries — Calculation of heater-tube thickness in petroleum refineries — Technical Corrigendum 1","Industries du pétrole, de la pétrochimie et du gaz naturel — Calcul de l'épaisseur des tubes de fours de raffineries de pétrole — Rectificatif technique 1",2008-06-04,2,['75.180.20'],ISO/TC 67/SC 6,9599,,[83005],['en'],2,

22678,IS,,ISO 13705:2001,Petroleum and natural gas industries — Fired heaters for general refinery service,Industries du pétrole et du gaz naturel — Réchauffeurs à brûleurs pour usage général dans les raffineries,2001-12-20,1,['75.180.20'],ISO/TC 67/SC 6,9599,,[38660],['en'],234,

38660,IS,,ISO 13705:2006,"Petroleum, petrochemical and natural gas industries — Fired heaters for general refinery service","Industries du pétrole, de la pétrochimie et du gaz naturel — Réchauffeurs à brûleurs pour usage général dans les raffineries",2006-11-07,2,['75.180.20'],ISO/TC 67/SC 6,9599,[22678],[53647],"['en','fr']",266,"<p>ISO 13705:2006 specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing, preparation for shipment, and erection of fired heaters, air preheaters, fans and burners for general refinery service.</p>"

22679,IS,,ISO 13706:2000,Petroleum and natural gas industries — Air-cooled heat exchangers,Industries du pétrole et du gaz naturel — Échangeurs de chaleur refroidis à l'air,2000-04-06,1,"['27.060.30','75.180.20']",ISO/TC 67/SC 6,9599,,[35104],"['en','fr']",116,

35104,IS,,ISO 13706:2005,"Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers","Industries du pétrole, de la pétrochimie et du gaz naturel — Échangeurs de chaleur refroidis à l'air",2005-10-14,2,"['27.060.30','75.180.20']",ISO/TC 67/SC 6,9599,[22679],[45638],['en'],115,"<p>ISO 13706:2005 gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of air-cooled heat exchangers for use in the petroleum and natural gas industries.</p><p>ISO 13706:2005 is applicable to air-cooled heat exchangers with horizontal bundles, but the basic concepts can also be applied to other configurations.</p>"

36350,IS,,ISO 13709:2003,"Centrifugal pumps for petroleum, petrochemical and natural gas industries","Pompes centrifuges pour les industries du pétrole, de la pétrochimie et du gaz naturel",2003-07-07,1,"['71.120.99','75.180.20']",ISO/TC 115/SC 3,9599,,[41612],"['en','fr']",184,"<p>ISO 13709:2003 specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. </p><p>ISO 13709:2003 is applicable to overhung pumps, between-bearings pumps and vertically-suspended pumps. Clause 8 provides requirements applicable to specific types of pump. All other clauses of ISO 13709:20

54288,IS,,ISO 13713:2012,Ships and marine technology — Ship's mooring and towing fittings — Mooring chocks,Navires et technologie maritime — Corps-morts et ferrures de remorquage de navires — Chaumards,2012-06-25,1,['47.020.50'],ISO/TC 8/SC 4,9599,,[74614],['en'],10,"<p>1 Scope</p><p>This International Standard specifies the design, size and technical requirements for mooring chocks installed to lead the mooring and towing rope of a ship.</p>"

18124,IS,,ISO 13715:1994,Technical drawings — Corners — Vocabulary and indication on drawings,Dessins techniques — Arêtes — Vocabulaire et indication sur les dessins,1994-09-29,1,['01.100.20'],ISO/TC 10/SC 6,9599,,[27925],"['en','fr']",13,

27925,IS,,ISO 13715:2000,Technical drawings — Edges of undefined shape — Vocabulary and indications,Dessins techniques — Arêtes de forme non définie — Vocabulaire et indications sur les dessins,2000-06-15,2,"['01.100.20','01.040.01']",ISO/TC 10/SC 6,9599,[18124],[61328],"['en','fr']",13,

22724,IS,,ISO 13716:1999,Dentistry — Reversible-irreversible hydrocolloid impression material systems,Art dentaire — Systèmes de produits pour empreintes à base d'hydrocolloïdes réversibles-irréversibles,1999-05-06,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[55314],"['en','fr']",15,

22754,IS,,ISO 13720:1995,Meat and meat products — Enumeration of Pseudomonas spp.,Viande et produits à base de viande — Dénombrement de Pseudomonas spp.,1995-12-21,1,['07.100.30'],ISO/TC 34/SC 6,9599,,"[45099,36701,39774]","['en','fr']",7,"<p>Describes a method for the enumeration of Pseudomonas spp. in meat and meat products, including poultry, by means of a colony-count technique after aerobic incubation at 25 °C for 48 h.</p>"

21694,IS,,ISO 13722:1996,Meat and meat products — Enumeration of Brochothrix thermosphacta — Colony-count technique,Viande et produits à base de viande — Dénombrement de Brochothrix thermosphacta — Technique par comptage des colonies obtenues,1996-12-26,1,['07.100.30'],ISO/TC 34/SC 9,9599,,[69052],"['en','fr']",8,"<p>Describes a method for the enumeration of viable Brochothrix thermosphacta in meat and meat products, including poultry, by means of a colony-count technique.</p>"

22768,IS,,ISO 13726:1998,"Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm — Accessory mounting dimensions","Transmissions hydrauliques — Vérins à simple tige, série compacte 16 MPa (160 bar) d'alésages 250 mm à 500 mm — Dimensions d'interchangeabilité des accessoires",1998-07-30,1,['23.100.20'],ISO/TC 131/SC 3,9599,,[40299],"['en','fr']",6,

40299,IS,,ISO 13726:2008,"Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm — Accessory mounting dimensions","Transmissions hydrauliques — Vérins à simple tige, série compacte 16 MPa (160 bar) d'alésages 250 mm à 500 mm — Dimensions d'interchangeabilité des accessoires",2008-02-27,2,['23.100.20'],ISO/TC 131/SC 3,9599,[22768],[86685],"['en','fr']",7,"<p>ISO 13726:2008 specifies the mounting dimensions required for interchangeability of accessories for 16 MPa (160 bar) compact cylinders conforming to ISO 6020-3. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-3, but this

54289,IS,,ISO 13728:2012,Ships and marine technology — Ship's mooring and towing fittings — Panama chocks,Navires et technologie maritime — Corps-morts et ferrures de remorquage de navires — Écubiers de Panama,2012-06-25,1,['47.020.50'],ISO/TC 8/SC 4,9599,,[74611],['en'],10,"<p>This International Standard specifies the design, size and technical requirements for Panama chocks suitable for installation on ships passing through the Panama Canal which are normally assisted by locomotives using steel towing wires. These chocks meet normal mooring requirements and Panama Canal requirements.</p>"

54290,IS,,ISO 13729:2012,Ships and marine technology — Ship's mooring and towing fittings — Closed chocks,Navires et technologie maritime — Corps-morts et ferrures de remorquage de navires — Chaumards fermés,2012-06-25,1,['47.020.50'],ISO/TC 8/SC 4,9599,,[74615],['en'],10,"<p>1 Scope</p><p>This International Standard specifies the design, size and technical requirements for closed chocks installed to lead the mooring and towing rope of a ship.</p>"

22789,IS,,ISO 13730:1996,Meat and meat products — Determination of total phosphorus content — Spectrometric method,Viande et produits à base de viande — Détermination de la teneur en phosphore total — Méthode spectrométrique,1996-12-26,1,['67.120.10'],ISO/TC 34/SC 6,9599,,[76935],['en'],6,"<p>Contains a spectrometric method for the determination of the total phosphorus content of meat and meat products, including poultry.</p>"

54291,IS,,ISO 13733:2012,Ships and marine technology — Ship's mooring and towing fittings — Universal fairleads with upper roller,Navires et technologie maritime — Corps-morts et ferrures de remorquage de navires — Chaumards universels avec rouleau supérieur,2012-06-25,1,['47.020.50'],ISO/TC 8/SC 4,9599,,[74613],['en'],18,"<p>ISO 13733:2012 specifies the design, size and technical requirements for universal fairleads with upper roller(s) installed to lead the mooring rope of a ship.</p>"

22798,IS,,ISO 13734:1998,Natural gas — Organic sulfur compounds used as odorants — Requirements and test methods,Gaz naturel — Composés organiques soufrés utilisés comme odorisants — Prescriptions et méthodes d'essai,1998-06-25,1,['75.060'],ISO/TC 193,9599,,[56767],['en'],6,"<p>La présente norme spécifie les exigences et les méthodes d'essai applicables aux composés organiques soufrés, désignés ci-après comme odorisants, utilisés pour l'odorisation du gaz naturel et de ses substituts pour les réseaux publics d'alimentation en gaz.</p>"

32325,IS,Cor,ISO 13734:1998/Cor 1:1999,Natural gas — Organic sulfur compounds used as odorants — Requirements and test methods — Technical Corrigendum 1,Gaz naturel — Composés organiques soufrés utilisés comme odorisants — Prescriptions et méthodes d'essai — Rectificatif technique 1,1999-07-01,1,['75.060'],ISO/TC 193,9599,,[56767],['en'],2,

22217,IS,,ISO 13736:1997,Petroleum products and other liquids — Determination of flash point — Abel closed cup method,Produits pétroliers et autres liquides — Détermination du point d'éclair — Méthode Abel en vase clos,1997-10-30,1,['75.080'],ISO/TC 28,9599,,[43228],"['en','fr']",18,

43228,IS,,ISO 13736:2008,Determination of flash point — Abel closed-cup method,Détermination du point d'éclair — Méthode Abel en vase clos,2008-09-01,2,['75.080'],ISO/TC 28,9599,[22217],[54734],"['en','fr']",21,"<p>ISO 13736:2008 specifies a method for the determination of the closed-cup flash point of combustible liquids having flash points between - 30,0 °C and 70,0 °C, inclusive. However, the precision given for this method is only valid for flash points in the range - 5,0 °C to 66,5 °C.</p><p>ISO 13736:2008 is not applicable to water-borne paints, which can, however, be tested using ISO 3679.</p>"

54734,IS,,ISO 13736:2013,Determination of flash point — Abel closed-cup method,Détermination du point d'éclair — Méthode Abel en vase clos,2013-04-10,3,['75.080'],ISO/TC 28,9599,[43228],[79535],"['en','fr']",23,"<p>ISO 13736:2013 specifies a method for the determination of the manual and automated closed-cup flash point of combustible liquids having flash points between −30,0 °C to 75,0 °C . However, the precision given for this method is only valid for flash points in the range −8,5 °C to 75,0 °C.</p><p>ISO 13736:2013 is not applicable to water-borne paints.</p>"

22139,IS,,ISO 13738:2000,"Lubricants, industrial oils and related products (class L) — Family E (Internal combustion engine oils) — Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD)","Lubrifiants, huiles industrielles et produits connexes (classe L) — Famille E (Huiles pour moteurs à combustion interne) — Spécifications applicables aux huiles pour moteurs deux-temps à essence (catégories EGB, EGC et EGD)",2000-03-23,1,['75.100'],ISO/TC 28/SC 4,9599,,[46057],"['en','fr']",6,

43387,IS,,ISO 13739:2010,Petroleum products — Procedures for transfer of bunkers to vessels,Produits pétroliers — Procédures de transfert des soutes dans les navires,2010-01-14,1,['75.180.30'],ISO/TC 28/SC 2,9599,[22336],[70786],"['en','fr']",42,"<p>ISO 13739:2010 specifies procedures and requirements for the transfer of bunkers to vessels involving bunker tankers, road tankers and shore pipelines. It applies to pre-delivery, delivery and post-delivery checks and documentation.</p>"

22335,IS,,ISO 13740:1998,Crude petroleum and petroleum products - Transfer accountability - Assessment of vessel experience factor on loading (VEFL) and vessel experience factor on discharging (VEFD) of ocean-going tanker vessels,Pétrole brut et produits pétroliers — Transfert des cargaisons — Détermination du facteur d'expérience du navire au chargement (VEFL) et du facteur d'expérience du navire au déchargement (VEFD) pour les navires de mer de type pétrolier,1998-09-24,1,['75.180.30'],ISO/TC 28/SC 2,9599,,[56230],"['en','fr']",9,

22804,IS,,ISO 13741-1:1998,Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 1: Direct liquid injection method,Plastiques/caoutchouc — Dispersions de polymères et latex de caoutchouc (naturel et synthétique) — Détermination des monomères résiduels et autres constituants organiques par chromatographie en phase gazeuse sur colonne capillaire — Partie 1: Méthode d'injection liquide directe,1998-02-19,1,"['83.080.01','83.040.10']",ISO/TC 61/SC 9,9599,,[80316],"['en','fr']",7,

54292,IS,,ISO 13742:2012,Ships and marine technology — Ship's mooring and towing fittings — Universal fairleads without upper roller,Navires et technologie maritime — Corps-morts et ferrures de remorquage de navires — Chaumards universels sans rouleau supérieur,2012-06-25,1,['47.020.50'],ISO/TC 8/SC 4,9599,,[74616],['en'],17,"<p>This International Standard specifies the design, size and technical requirements for universal fairleads without</p><p>upper roller(s) installed to lead the mooring rope of a ship.</p>"

22810,IS,,ISO 13746:2000,Textile floor coverings — Guidelines for installation and use on stairs,Revêtements de sol textiles — Lignes directrices pour la mise en oeuvre et l'utilisation sur les escaliers,2000-12-21,1,['97.150'],ISO/TC 219,9599,,[71176],"['en','fr']",4,

22811,IS,,ISO 13747:1999,"Textile floor coverings — Determination of size, squareness and straightness of edge of tiles","Revêtements de sol textiles — Détermination de la dimension, de la rectitude et de l'équerrage des arêtes de dalles",1999-12-16,1,['97.150'],ISO/TC 219,9599,,[61667],"['en','fr']",7,

54293,IS,,ISO 13755:2012,Ships and marine technology — Ship's mooring and towing fittings — Steel rollers,Navires et technologie maritime — Corps-morts et ferrures de remorquage de navires — Rouleaux en acier,2012-06-25,1,['47.020.50'],ISO/TC 8/SC 4,9599,,[74609],['en'],18,"<p>This International Standard specifies the design, size and technical requirements for steel rollers installed to</p><p>lead the mooring rope of a ship.</p>"

22826,IS,,ISO 13756:1997,Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using sodium chloride or potassium chloride,Dosage de l'argent dans les alliages d'argent pour la bijouterie-joaillerie — Méthode volumétrique (potentiométrique) utilisant le chlorure de sodium ou le chlorure de potassium,1997-12-18,1,['39.060'],ISO/TC 174,9599,,[57653],"['en','fr']",4,

57653,IS,,ISO 13756:2015,Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using sodium chloride or potassium chloride,Joaillerie — Dosage de l'argent dans les alliages d'argent pour la bijouterie-joaillerie — Méthode volumétrique (potentiométrique) utilisant le chlorure de sodium ou le chlorure de potassium,2015-01-20,2,['39.060'],ISO/TC 174,9599,[22826],[81402],['en'],5,"<p>ISO 13756:2015 specifies a volumetric method for the determination of silver in silver jewellery alloys, preferably within the range of fineness stated in ISO 9202. These alloys may contain copper, zinc, cadmium, and palladium. Apart from palladium, which must be precipi