Withdrawn and superseded ISO standards — page 34 of 246

72561,IS,Amd,ISO 13105-2:2014/Amd 1:2017,Building construction machinery and equipment — Machinery for concrete surface floating and finishing — Part 2: Safety requirements and verification — Amendment 1,Machines et matériels pour la construction des bâtiments — Talocheuses-lisseuses de mortier — Partie 2: Les exigences de sécurité et de vérification — Amendement 1,2017-12-05,1,"['91.220','13.110']",ISO/TC 195/SC 1,9599,,[84915],['en'],1,

52898,IS,,ISO 13110:2012,Cigarettes — Determination of menthol in smoke condensates — Gas-chromatographic method,Cigarettes — Dosage du menthol dans les condensats de fumée — Méthode par chromatographie en phase gazeuse,2012-10-15,1,['65.160'],ISO/TC 126,9599,,[89329],"['en','fr']",8,<p>ISO 13110:2012 specifies a method for the gas-chromatographic determination of menthol in the total particulate matter (TPM) of mentholated cigarette smoke condensates. The smoking of cigarettes and the collection of mainstream smoke are carried out in accordance with ISO 4387 with some exceptions.</p><p>Encapsulated menthol in specific products may lead to specific handling not described in ISO 13110:2012.</

52951,IS,,ISO 13119:2012,Health informatics — Clinical knowledge resources — Metadata,Informatique de santé — Ressources des connaissances cliniques — Métadonnées,2012-10-26,1,['35.240.80'],ISO/TC 215,9599,,[78392],"['en','fr']",23,"<p>ISO 13119:2012 specifies a number of metadata elements that describe resources containing medical knowledge. It is primarily applicable to digital documents provided as web resources, accessible from databases or via file transfer, but can be applicable also to paper documents, e.g. articles in medical literature.</p>"

52952,IS,,ISO 13120:2013,Health informatics — Syntax to represent the content of healthcare classification systems — Classification Markup Language (ClaML),Informatique de santé — Syntaxe de représentation du contenu des systèmes de classification des soins de santé — Langage de marquage de la classification (ClaML),2013-03-27,1,['35.240.80'],ISO/TC 215,9599,,[69318],"['en','fr']",37,"<p>The main purpose of ISO 13120:2013 is to formally represent the content and hierarchical structure of healthcare classification systems in a markup language for the safe exchange and distribution of data and structure between organizations and dissimilar software products.</p><p>The scope of healthcare class

53054,IS,,ISO 13132:2011,Laboratory glassware — Petri dishes,Verrerie de laboratoire — Boîtes de Petri,2011-07-06,1,"['11.100.01','71.040.20']",ISO/TC 48,9599,,"[82979,74929]","['en','fr','ru']",5,<p>ISO 13132:2011 specifies requirements and tests for glass Petri dishes intended for general laboratory purposes and microbiological work.</p>

53330,IS,,ISO 13137:2013,Workplace atmospheres — Pumps for personal sampling of chemical and biological agents — Requirements and test methods,Air des lieux de travail — Pompes pour le prélèvement individuel des agents chimiques et biologiques — Exigences et méthodes d'essai,2013-10-16,1,['13.040.30'],ISO/TC 146/SC 2,9599,,[79682],"['en','fr']",31,"<p>ISO 13137:2013 specifies performance requirements for battery powered pumps used for personal sampling of chemical and biological agents in workplace air. It also specifies test methods in order to determine the performance characteristics of such pumps under prescribed laboratory conditions.</p><p>ISO 13137:2013 is applicable to battery powere

68245,IS,,ISO 13140-1:2016,Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO 13141 — Part 1: Test suite structure and test purposes,Perception du télépéage — Évaluation de conformité des équipements embarqués et des équipements d'infrastructures routières à l'ISO 13141 — Partie 1: Structure de la suite d'essais et intentions d'essai,2016-11-17,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,[53341],[87049],"['en','fr']",38,<p>ISO 13140-1:2016 specifies the test suite structure (TSS) and test purposes (TP) to evaluate the conformity of on-board units (OBU) and roadside equipment (RSE) to ISO 13141.</p><p>It provides a basis for conformance tests for

64166,IS,,ISO 13141:2015,Electronic fee collection — Localisation augmentation communication for autonomous systems,Perception de télépéage — Communications d'augmentation de localisations pour systèmes autonomes,2015-11-18,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,"[63683,53342]",[82930],"['en','fr']",31,"<p>ISO 13141:2015 establishes requirements for short-range communication for the purposes of augmenting the localization in autonomous electronic fee collection (EFC) systems. Localization augmentation serves to inform on-board equipment (OBE) about geographical location and the identification of a charge object. This International Standard specifies the provision of location and headi

70034,IS,Amd,ISO 13141:2015/Amd 1:2017,Electronic fee collection — Localisation augmentation communication for autonomous systems — Amendment 1,Perception de télépéage — Communications d'augmentation de localisations pour systèmes autonomes — Amendement 1,2017-06-06,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[82930],"['en','fr']",4,

53362,IS,,ISO 13142:2015,Electro-optical systems — Cavity ring-down technique for high-reflectance measurement,Systèmes électro-optiques — Technique d'alternance de la cavité pour le mesurage du facteur de réflexion,2015-06-29,1,['31.260'],ISO/TC 172/SC 9,9599,,[75857],['en'],14,"<p>ISO 13142:2015 specifies measurement procedures for the precise determination of the high reflectance of optical laser components. Up to now, the ISO standardized testing methods for reflectance of optical laser components have the accuracy limit of approximately 0,01 % (for measurement of absolute reflectance) which are not appropriate for measuring the reflectance higher than 99,99 % or, in some cases, measurem

68246,IS,,ISO 13143-1:2016,Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO 12813 — Part 1: Test suite structure and test purposes,Perception du télépéage — Évaluation des équipements embarqués et en bord de route quant à la conformité avec l'ISO 12813 — Partie 1: Structure de suite d'essais et buts des essais,2016-11-21,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,[53338],[78354],"['en','fr']",57,<p>ISO 18143-1:2016 specifies the test suite structure (TSS) and test purposes (TP) to evaluate the conformity of on-board units (OBU) and roadside equipment (RSE) to ISO 12813:2015.</p><p>It provides a basis for conformance tests for dedicated short-

78354,IS,,ISO 13143-1:2020,Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO 12813 — Part 1: Test suite structure and test purposes,Perception de télépéage — Évaluation des équipements embarqués et en bord de route quant à la conformité avec l'ISO 12813 — Partie 1: Structure de suite d'essais et buts des essais,2020-11-03,2,"['35.240.60','03.220.20']",ISO/TC 204,9599,[68246],[85043],"['en','fr']",70,"<p>This document specifies the test suite structure (TSS) and test purposes (TPs) for evaluating the conformity of on-board equipment (OBE) and roadside equipment (RSE) to ISO 12813.</p><p>It provides a basis for conformance tests for dedicated short

53389,IS,,ISO 13145:2012,Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer,Caoutchouc — Détermination de la viscosité et de la relaxation de contrainte au moyen d'un rhéomètre à cisaillement sans rotor étanche,2012-09-20,1,['83.060'],ISO/TC 45/SC 2,9599,,[86600],['en'],14,"<p>ISO 13145:2012 describes a method for the determination of the viscosity and stress relaxation of raw or compounded rubber under specified conditions.</p><p>The viscosity determination consists of a constant strain, temperature and frequency test in which the elastic and the loss components of the complex shear modulus can be determined.</p><p>The determination of stress

53332,IS,,ISO 13160:2012,Water quality — Strontium 90 and strontium 89 — Test methods using liquid scintillation counting or proportional counting,Qualité de l'eau — Strontium 90 et strontium 89 — Méthodes d'essai par comptage des scintillations en milieu liquide ou par comptage proportionnel,2012-07-13,1,"['17.240','13.060.60']",ISO/TC 147/SC 3,9599,,[78205],"['en','fr']",38,"<p>ISO 13160:2012 specifies the test methods and their associated principles for the measurement of the activity of ⁹⁰Sr in equilibrium with ⁹⁰Y, and ⁸⁹Sr, pure beta-emitting radionuclides, in water samples. Different chemical separation methods are presented to produce strontium and yt

53402,IS,,ISO 13161:2011,Water quality — Measurement of polonium 210 activity concentration in water by alpha spectrometry,Qualité de l'eau — Mesurage de l'activité du polonium 210 dans l'eau par spectrométrie alpha,2011-09-30,1,"['17.240','13.060.60']",ISO/TC 147/SC 3,9599,,[74776],"['en','fr','ru']",15,"<p>ISO 13161:2011 specifies the measurement of ²¹⁰Po activity concentration by alpha spectrometry in all kinds of natural waters.</p><p>The detection limit of this method depends on the volume of the sample, the counting time, the background count rate and the detection efficiency. In the case of drinking water, the analysis is usually carried out on the raw sample, without filt

53403,IS,,ISO 13162:2011,Water quality — Determination of carbon 14 activity — Liquid scintillation counting method,Qualité de l'eau — Détermination de l'activité volumique du carbone 14 — Méthode par comptage des scintillations en milieu liquide,2011-10-21,1,"['17.240','13.060.60']",ISO/TC 147/SC 3,9599,,[75821],"['en','fr','ru']",21,"<p>ISO 13162:2011 specifies the conditions for the determination of ¹⁴C activity concentration in samples of environmental water or of ¹⁴C-containing water using liquid scintillation counting.</p><p>The method is applicable to the analysis of any organic molecule soluble in water that is well mixed with the scintillation cocktail. It does

56463,IS,,ISO 13163:2013,Water quality — Lead-210 — Test method using liquid scintillation counting,Qualité de l'eau — Plomb 210 — Méthode d'essai par comptage des scintillations en milieu liquide,2013-10-04,1,"['17.240','13.060.60']",ISO/TC 147/SC 3,9599,,[78845],"['en','fr','ru']",18,"<p>ISO 13163 specifies the determination of lead-210 (210Pb) activity concentration in samples of all types of water using liquid scintillation counting (LSC). For raw and drinking water, the sample should be degassed in order to minimize the ingrowth of ²¹⁰Pb from radon-222 (²²²Rn).</p><p>Using currently available liquid scintillation counters, this test method can measure the <sup>210<

62424,IS,,ISO 13164-4:2015,Water quality — Radon-222 — Part 4: Test method using two-phase liquid scintillation counting,Qualité de l'eau — Radon 222 — Partie 4: Méthode d'essai par comptage des scintillations en milieu liquide à deux phases,2015-06-08,1,"['17.240','13.060.60','13.280']",ISO/TC 147/SC 3,9599,,[83055],"['en','fr']",12,"<p>ISO 13164-4:2015 describes a test method for the determination of radon-222 (²²²Rn) activity concentration in non-saline waters by extraction and liquid scintillation counting.</p><p>The radon-222 activity concentrations, which can be measured by this test method utilizing currently available instruments, are at least above 0,5 Bq l⁻¹ f

56464,IS,,ISO 13165-1:2013,Water quality — Radium-226 — Part 1: Test method using liquid scintillation counting,Qualité de l'eau — Radium 226 — Partie 1: Méthode d'essai par comptage des scintillations en milieu liquide,2013-04-10,1,"['17.240','13.060.60']",ISO/TC 147/SC 3,9599,,[78802],"['en','fr','ru']",14,<p>ISO 13165-1:2013 specifies the determination of radium-226 (²²⁶Ra) activity concentration in non-saline water samples by extraction of its daughter radon-222 (²²²Rn) and its measurement using liquid scintillation counting.</p><p>Radium-226 activity concentrations which can be measured by this test method utilizing currently available liquid scintillation counters

53406,IS,,ISO 13165-2:2014,Water quality — Radium-226 — Part 2: Test method using emanometry,Qualité de l'eau — Radium 226 — Partie 2: Méthode d'essai par émanométrie,2014-04-17,1,"['17.240','13.060.60']",ISO/TC 147/SC 3,9599,,[82006],"['en','fr','ru']",15,"<p>ISO 13165-2:2014 specifies the determination of radium-226 (²²⁶Ra) activity concentration in all types of water by emanometry. The method specified is suitable for the determination of the soluble, suspended, and total ²²⁶Ra activity concentration in all types of water with soluble ²²⁶Ra activity concentrations greater than 0,02 Bq l⁻¹. In water containing high activity concentrations of <sup

60146,IS,,ISO 13165-3:2016,Water quality — Radium-226 — Part 3: Test method using coprecipitation and gamma-spectrometry,Qualité de l'eau — Radium 226 — Partie 3: Méthode d'essai par coprécipitation et spectrométrie gamma,2016-03-08,1,"['17.240','13.060.60']",ISO/TC 147/SC 3,9599,,[84238],"['en','fr']",14,"<p>ISO 13165-3:2016 specifies the determination of radium-226 (226Ra) activity concentration in all types of water by coprecipitation followed by gamma-spectrometry (see ISO 18589‑3).</p><p>The method described is suitable for determination of soluble 226Ra activity concentrations greater than 0,02 Bq l−1 using a sample volume of 1 l to 100 l of any water type.</p><p>For water samples smal

59209,IS,,ISO 13166:2014,Water quality — Uranium isotopes — Test method using alpha-spectrometry,Qualité de l'eau — Isotopes de l'uranium — Méthode d'essai par spectrométrie alpha,2014-02-27,1,"['13.060.60','13.280']",ISO/TC 147/SC 3,9599,,[80037],"['en','fr','ru']",18,"<p>ISO 13166:2014 specifies the conditions for the determination of uranium isotope activity concentration in samples of environmental water (including sea waters) using alpha-spectrometry and ²³²U as a yield tracer. A chemical separation is required to separate and purify uranium from a test portion of the sample.</p><p>Plutonium isotopes can interfere, if present, with detectable activities in the sample.</p><p>T

53408,IS,,ISO 13167:2015,"Water quality — Plutonium, americium, curium and neptunium — Test method using alpha spectrometry","Qualité de l'eau — Plutonium, americium, curium et neptunium — Méthode d'essai par spectrométrie alpha",2015-12-04,1,"['17.240','13.060.60']",ISO/TC 147/SC 3,9599,,[83056],"['en','fr']",20,"<p>ISO 13167:2015 specifies a test method for measuring actinides (²³⁸Pu, ^239+240Pu, ²⁴¹Am, ²⁴²Cm, ^243+244Cm and ²³⁷Np) in water samples by alpha spectrometry following a chemical separation.</p><p>The method can be used for any type of environmental study or monitoring.</p><p>The volume of the test portion required

53409,IS,,ISO 13168:2015,Water quality — Simultaneous determination of tritium and carbon 14 activities — Test method using liquid scintillation counting,Qualité de l'eau — Détermination simultanée des activités volumiques du tritium et du carbone 14 — Méthode par comptage des scintillations en milieu liquide,2015-06-29,1,"['13.060.60','13.280']",ISO/TC 147/SC 3,9599,,[82008],"['en','fr']",16,"<p>ISO 13168:2015 describes a test method for the simultaneous measurement of tritium and carbon-14 in water samples by liquid scintillation counting of a source obtained by mixing the water sample with a hydrophilic scintillation cocktail.</p><p>This is considered a screening method because of the pot

53448,IS,,ISO 13179-1:2014,Implants for surgery — Plasma-sprayed unalloyed titanium coatings on metallic surgical implants — Part 1: General requirements,"Implants chirurgicaux — Revêtements en titane non-allié des implants chirurgicaux métalliques, obtenus par projection plasma — Partie 1: Exigences générales",2014-05-30,1,['11.040.40'],ISO/TC 150,9599,,[79827],"['en','fr']",5,<p>ISO 13179-1:2014 specifies general requirements for plasma-sprayed unalloyed titanium coatings on metallic surgical implants. It applies to plasma spraying in air and in vacuum.</p><p>ISO 13179-1:2014 does not apply to coatings made of other materials than unalloyed titanium or coatings realized by another technolo

53490,IS,,ISO 13196:2013,Soil quality — Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument,Qualité du sol — Analyse rapide d'une sélection d'éléments dans les sols à l'aide d'un spectromètre de fluorescence X à dispersion d'énergie portable ou portatif,2013-03-06,1,['13.080.10'],ISO/TC 190/SC 3,9599,,[85888],"['en','fr']",12,"<p>ISO 13196:2013 specifies the procedure for screening soils and soil-like materials for selected elements when handheld or portable energy-dispersive XRF spectrometers are used. This quick method is assumed to be applied on-site to obtain qualitative or semiquantitative data that assists d

3945,IS,,ISO 132:1983,"Rubber, vulcanized — Determination of flex cracking (De Mattia)",Caoutchouc vulcanisé — Détermination de la résistance au craquelage par flexion (De Mattia),1983-02-01,2,['83.060'],ISO/TC 45/SC 2,9599,,[25527],"['en','fr']",3,

25527,IS,,ISO 132:1999,"Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth (De Mattia)",Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistance au développement d'une craquelure (De Mattia),1999-03-25,3,['83.060'],ISO/TC 45/SC 2,9599,"[3945,3946]",[41614],['en'],7,

41614,IS,,ISO 132:2005,"Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth (De Mattia)",Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistance au développement d'une craquelure (De Mattia),2005-10-27,4,['83.060'],ISO/TC 45/SC 2,9599,[25527],[53029],"['en','fr']",8,"<p>ISO 132:2005 specifies a method of test intended for use in comparing the resistance of rubbers to the formation and growth of cracks, when subjected to repeated flexing on the De Mattia type machine. For determination of crack growth, an artificial cut is made in the test piece to initiate cut growth.</p>"

53029,IS,,ISO 132:2011,"Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth (De Mattia)",Caoutchouc vulcanisé ou thermoplastique — Détermination de la résistance au développement d'une craquelure (De Mattia),2011-11-14,5,['83.060'],ISO/TC 45/SC 2,9599,[41614],[72788],"['en','fr']",15,"<p>ISO 132:2011 specifies a method of test intended for use in comparing the resistance of vulcanized or thermoplastic rubbers to the formation and growth of cracks, when subjected to repeated flexing on the De Mattia type machine. For determination of crack growth, an artificial cut is made in the test piece to initiate cut growth.</p>"

53509,IS,,ISO 13209-2:2012,Road vehicles — Open Test sequence eXchange format (OTX) — Part 2: Core data model specification and requirements,Véhicules routiers — Format public d'échange de séquence-tests (OTX) — Partie 2: Exigences et spécifications du modèle de données central,2012-08-03,1,"['43.040.15','43.180']",ISO/TC 22/SC 31,9599,,[76976],['en'],205,"<p>ISO 13209-2:2012 defines the OTX Core requirements and data model specifications.</p><p>The requirements are derived from the use cases described in ISO 13209-1.<i> </i>They are listed in the requirements section that composes the first major part of ISO 13209-2:2012.</p><p>The data model specification aims at an exhaustive definition o

55599,IS,,ISO 13209-3:2012,Road vehicles — Open Test sequence eXchange format (OTX) — Part 3: Standard extensions and requirements,Véhicules routiers — Format public d'échange de séquence-tests (OTX) — Partie 3: Exigences et spécifications des extensions du standard,2012-08-09,1,"['43.040.15','43.180']",ISO/TC 22/SC 31,9599,,[76977],['en'],278,"<p>The Open Test sequence eXchange (OTX) Core, defined in ISO 13209-2, describes the basic structure underlying every OTX document. ISO 13209-3:2012 extends the Core by a set of additional features, using the extension mechanism rules described in ISO 13209-2. The extensions defined in ISO 13209-3:2012 comprise features which allow diagnostic communic

74090,IS,,ISO 13209-4:2021,Road vehicles — Open Test sequence eXchange format (OTX) — Part 4: Expanded extensions interface definition,Véhicules routiers — Format public d'échange de séquence-tests (OTX) — Partie 4: Définition de l'interface des extensions étendues,2021-05-21,1,"['43.040.15','43.180']",ISO/TC 22/SC 31,9599,,[84212],['en'],379,"<p>This document defines the Open Test sequence eXchange (OTX) additional extension requirements and data model specifications.</p><p>The requirements are derived from the use cases described in ISO 13209-1. They are listed in Clause 4.</p><p>The data model specification aims at an exhaustive definition of all features of the OTX extensions which have

21415,IS,,ISO 13212:1999,Ophthalmic optics — Contact lens care products — Guidelines for determination of shelf-life,Optique ophtalmique — Produits d'entretien pour lentilles de contact — Lignes directrices pour la détermination de la durée de conservation,1999-05-06,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[57207],"['en','fr']",6,

57207,IS,,ISO 13212:2011,Ophthalmic optics — Contact lens care products — Guidelines for determination of shelf-life,Optique ophtalmique — Produits d'entretien pour lentilles de contact — Lignes directrices pour la détermination de la durée de conservation,2011-05-05,2,['11.040.70'],ISO/TC 172/SC 7,9599,[21415],[61684],"['en','fr','ru']",7,<p>ISO 13212:2011 provides guidance on the design of stability studies for use in gathering information to enable determination of the shelf-life of contact lens care products.</p><p>ISO 13212:2011does not address studies designed to obtain information to establish the in-use stability (i.e. notice of discard date) of contact lens care products.</p> 57208

23261,IS,,ISO 13215-2:1999,Road vehicles — Reduction of misuse risk of child restraint systems — Part 2: Requirements and test procedures for correct installation (panel method),Véhicules routiers — Réduction du risque de mauvaise utilisation des systèmes de retenue pour enfants — Partie 2: Exigences et méthodes d'essai pour une installation correcte (méthode par panel),1999-11-04,1,['43.040.80'],ISO/TC 22/SC 36,9599,,[75355],"['en','fr']",9,"<p>This part of ISO 13215 specifies the requirements and test methods for judging if user-installed child restraints are</p><p>correctly installed.</p><p>Acceptance criteria are given for the child restraint when tested by the specified methods. These m

23262,IS,,ISO 13215-3:1999,Road vehicles — Reduction of misuse risk of child restraint systems — Part 3: Prediction and assessment of misuse by Misuse Mode and Effect Analysis (MMEA),Véhicules routiers — Réduction du risque de mauvaise utilisation des systèmes de retenue pour enfants — Partie 3: Prédiction et évaluation des mauvaises utilisations par MMEA (analyse des modes de mauvaise utilisation et de leurs effets),1999-04-15,1,['43.040.80'],ISO/TC 22/SC 36,9599,,[75356],"['en','fr']",9,"<p>This part of ISO 13215 specifies a method to predict and quantify misuse of child restraint systems which is called</p><p>Misuse Mode and Effect Analysis (MMEA). Such misuse may degrade the performance

37419,IS,,ISO 13216-3:2006,Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 3: Classification of child restraint dimensions and space in vehicle,Véhicules routiers — Ancrages dans les véhicules et attaches aux ancrages pour systèmes de retenue pour enfants — Partie 3: Classification des dimensions des retenues pour enfants et espace dans le véhicule,2006-10-11,1,['43.040.80'],ISO/TC 22/SC 36,9599,,[67976],"['en','fr']",19,

21450,IS,,ISO 13226:1999,Rubber — Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers,Caoutchouc — Élastomères de référence normalisés (SRE) pour la caractérisation de l'effet des liquides sur les caoutchoucs vulcanisés,1999-12-02,1,['83.060'],ISO/TC 45/SC 2,9599,,[41625],['en'],27,

41625,IS,,ISO 13226:2005,Rubber — Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers,Caoutchouc — Élastomères de référence normalisés (SRE) pour la caractérisation de l'effet des liquides sur les caoutchoucs vulcanisés,2005-11-07,2,['83.060'],ISO/TC 45/SC 2,9599,[21450],[53034],"['en','fr']",27,"<p>ISO 13226:2005 specifies requirements for vulcanized rubbers in sheet form for use as standards in characterizing the effect of test liquids and service fluids. Details of the individual standard reference elastomers are listed in the annexes.</p><p>The compounding and preparation ensure that the property profile agrees sufficiently with that of the

46584,IS,Cor,ISO 13226:2005/Cor 1:2007,Rubber — Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers — Technical Corrigendum 1,Caoutchouc — Élastomères de référence normalisés (SRE) pour la caractérisation de l'effet des liquides sur les caoutchoucs vulcanisés — Rectificatif technique 1,2007-08-15,2,['83.060'],ISO/TC 45/SC 2,9599,,[53034],"['en','fr']",1,

53034,IS,,ISO 13226:2011,Rubber — Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers,Caoutchouc — Élastomères de référence normalisés (SRE) pour la caractérisation de l'effet des liquides sur les caoutchoucs vulcanisés,2011-10-25,3,['83.060'],ISO/TC 45/SC 2,9599,"[46584,41625]",[72791],"['en','fr']",29,"<p>ISO 13226:2011 specifies requirements for vulcanized rubbers in sheet form for use as standards in characterizing the effect of test liquids and service fluids. Details of the individual standard reference elastomers are listed in the annexes.</p><p>The compounding and preparation ensure that the property profile agrees sufficiently with tha

24803,IS,,ISO 13232-1:1996,"Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 1: Definitions, symbols and general considerations","Motocycles — Méthodes d'essai et d'analyse de l'évaluation par la recherche des dispositifs, montés sur les motocycles, visant à la protection des motocyclistes contre les collisions — Partie 1: Définitions, symboles et généralités",1996-12-26,1,['43.140'],ISO/TC 22,9599,,[37421],['en'],23,"<p>Contains the minimum requirements for research evaluation of rider protective devices fitted to motorcycles, which are intended to protect the rider in the event of a collision. Gives the defini

24804,IS,,ISO 13232-2:1996,Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 2: Definition of impact conditions in relation to accident data,"Motocycles — Méthodes d'essai et d'analyse de l'évaluation par la recherche des dispositifs, montés sur les motocycles, visant à la protection des motocyclistes contre les collisions — Partie 2: Définition des conditions de choc en fonction des données sur les accidents",1996-12-26,1,['43.140'],ISO/TC 22,9599,,[37422],['en'],53,"<p>Specifies minimum requirements for the collection and analysis of motor cycle accident data, in order to provide a statistical basis of defining

24805,IS,,ISO 13232-3:1996,Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 3: Anthropometric impact dummy,"Motocycles — Méthodes d'essai et d'analyse de l'évaluation par la recherche des dispositifs, montés sur les motocycles, visant à la protection des motocyclistes contre les collisions — Partie 3: Mannequin anthropométrique",1996-12-26,1,['43.180'],ISO/TC 22,9599,,[37423],['en'],65,"<p>Gives the minimum requirements for the biofidelity, compatibilit, repeatability and reproducibility of the motor cyclist anthropometric impact dummy.</p>"

24806,IS,,ISO 13232-4:1996,"Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 4: Variables to be measured, instrumentation and measurement procedures","Motocycles — Méthodes d'essai et d'analyse de l'évaluation par la recherche des dispositifs, montés sur les motocycles, visant à la protection des motocyclistes contre les collisions — Partie 4: Variables à mesurer, instrumentation et méthodes de mesure",1996-12-26,1,['43.140'],ISO/TC 22,9599,,[37424],['en'],77,"<p>Specifies requirements for the repeatability and reproducibility of the dynamic measurement procedures for the motor cycle, the opposing vehicle and th

24807,IS,,ISO 13232-5:1996,Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 5: Injury indices and risk/benefit analysis,"Motocycles — Méthodes d'essai et d'analyse de l'évaluation par la recherche des dispositifs, montés sur les motocycles, visant à la protection des motocyclistes contre les collisions — Partie 5: Indices de blessure et analyse risque/bénéfice",1996-12-26,1,['43.140'],ISO/TC 22,9599,,[37425],['en'],71,"<p>Provides injury indices, formulae which relate injury indices to probable injury costs, a means of doing risk/benefit analysis of protective devices fitted to motor cycles.</p>"

24808,IS,,ISO 13232-6:1996,Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 6: Full-scale impact-test procedures,"Motocycles — Méthodes d'essai et d'analyse de l'évaluation par la recherche des dispositifs, montés sur les motocycles, visant à la protection des motocyclistes contre les collisions — Partie 6: Méthodes d'essai de choc en vraie grandeur",1996-12-26,1,['43.140'],ISO/TC 22,9599,,[37426],['en'],39,"<p>Specifies minimum requirements for paired comparison tests, the preparation of the dummy, motor cycle, and opposing vehicle, the repeatability and reproducibility of impact test conditions, realistic and

24809,IS,,ISO 13232-7:1996,Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests,"Motocycles — Méthodes d'essai et d'analyse de l'évaluation par la recherche des dispositifs, montés sur les motocycles, visant à la protection des motocyclistes contre les collisions — Partie 7: Méthodes normalisées de simulation par ordinateur d'essais de choc sur motocycles",1996-12-26,1,['43.140'],ISO/TC 22,9599,,[37427],['en'],23,"<p>Provides conventions for calibrating and documentating the important features of the simulation models, guidelin

24810,IS,,ISO 13232-8:1996,Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 8: Documentation and reports,"Motocycles — Méthodes d'essai et d'analyse de l'évaluation par la recherche des dispositifs, montés sur les motocycles, visant à la protection des motocyclistes contre les collisions — Partie 8: Documentation et rapports",1996-12-26,1,['43.140'],ISO/TC 22,9599,,[37428],['en'],57,"<p>Contains a basis for documentation, data exchange, confirmation of results by other researchers, direct comparison of results between different facilities and the recommended minimum contents of publications which describe tests

5893,IS,,ISO 1324:1985,Solid wood parquet — Classification of oak strips,Parquet en bois massif — Classification des lames en chêne,1985-05-30,1,['79.080'],ISO/TC 218,9599,,[80116],"['en','fr']",3,"<p>Divides non-assembled strips into three quality grades that are identified by (+++), (++), (+) corresponding to the conditions specified in the tables. Designation or names for these quality grades may be assigned in national standards, provided that such standard indicate, at least in a note, the relationship with the ISO classification. Replaces Recommendation ISO/R 1324-1970 of which it constitutes a technical revision.</p>"

2907,IS,,ISO 13253:1995,Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance,Climatiseurs et pompes à chaleur air/air raccordés — Essais et détermination des caractéristiques de performance,1995-11-16,1,"['23.120','27.080']",ISO/TC 86/SC 6,9599,,"[54064,42730]","['en','fr']",46,<p>Establishes performance testing and rating criteria for ducted air-conditioners using air- and water-cooled condensers and ducted air-to-air heat pumps. Is limited to systems which use a single refrigeration circuit and have one evaporator and one condenser.</p>

54064,IS,,ISO 13253:2011,Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance,Climatiseurs et pompes à chaleur air/air raccordés — Essais et détermination des caractéristiques de performance,2011-07-13,2,"['23.120','27.080']",ISO/TC 86/SC 6,9599,[2907],[63407],"['en','fr','ru']",89,"<p>ISO 13253:2011 specifies the standard conditions for capacity and efficiency ratings of ducted, air-cooled air-conditioners and ducted air-to-air heat pumps. ISO 13253:2011 is applicable to the test methods for determining the capacity and efficiency ratings. Residential, commercial, and industrial single-package and split-system air-conditioners and heat pumps are included. T

3330,IS,,ISO 13256-1:1998,Water-source heat pumps — Testing and rating for performance — Part 1: Water-to-air and brine-to-air heat pumps,Pompes à chaleur à eau — Essais et détermination des caractéristiques de performance — Partie 1: Pompes à chaleur eau-air et eau glycolée-air,1998-08-27,1,['27.080'],ISO/TC 86/SC 6,9599,,[77526],"['en','fr']",37,

26945,IS,,ISO 13256-2:1998,Water-source heat pumps — Testing and rating for performance — Part 2: Water-to-water and brine-to-water heat pumps,Pompes à chaleur à eau — Essais et détermination des caractéristiques de performance — Partie 2: Pompes à chaleur eau-eau et eau glycolée-eau,1998-08-27,1,['27.080'],ISO/TC 86/SC 6,9599,,[77527],"['en','fr']",17,

53556,IS,,ISO 13257:2010,Thermoplastics piping systems for non-pressure applications — Test method for resistance to elevated temperature cycling,Systèmes de canalisations thermoplastiques pour applications sans pression — Méthode d'essai de résistance à des cycles de température élevée,2010-05-25,1,"['91.140.80','23.040.20']",ISO/TC 138/SC 1,9599,,[72622],"['en','fr','ru']",7,"<p>ISO 13257:2010 specifies a method for testing the resistance of thermoplastics piping systems for soil and waste discharge inside buildings, application area 'B', or buried in the ground within the building structure, application areas 'BD' or 'UD', to 1 500 cycles of elevated temperature cycling.</p>"

53557,IS,,ISO 13259:2010,Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints,Systèmes de canalisations thermoplastiques pour applications enterrées sans pression — Méthodes d'essai d'étanchéité des assemblages à bague d'étanchéité en élastomère,2010-04-27,1,"['91.140.80','23.040.20']",ISO/TC 138/SC 1,9599,,[69999],"['en','fr','ru']",8,<p>ISO 13259:2010 specifies three basic test pressures for determining the leaktightness of elastomeric sealing ring type joints for buried thermoplastics non-pressure piping systems. It also describes four conditions under which the test can be executed.</p>

69999,IS,,ISO 13259:2018,Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints,Systèmes de canalisations en thermoplastiques pour applications enterrées sans pression — Méthodes d'essai d'étanchéité des assemblages à bague d'étanchéité en élastomère,2018-04-13,2,"['91.140.80','23.040.20']",ISO/TC 138/SC 1,9599,[53557],[80706],"['en','fr']",10,"<p>This document specifies a test method for determining the leak tightness of elastomeric sealing ring type joints for buried thermoplastics non-pressure piping systems.</p><p>Unless otherwise specified in the referring standard, the tests are carried out at the

53562,IS,,ISO 13265:2010,Thermoplastics piping systems for non-pressure underground drainage and sewerage — Joints for buried non-pressure applications — Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure,Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression — Assemblages pour applications enterrées sans pression — Méthode d'essai de la performance à long terme des assemblages avec garnitures d'étanchéité en élastomère par l'estimation de la pression d'étanchéité,2010-04-29,1,"['93.030','23.040.45','91.140.80','23.040.20']",ISO/TC 138/SC 1,9599,,[82925],"['en','fr'

53563,IS,,ISO 13266:2010,Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of resistance against surface and traffic loading,Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression — Éléments de réhausse thermoplastiques pour boîtes d'inspection et de branchement ou regards — Détermination de la résistance aux charges de remblai et de circulation,2010-04-27,1,"['93.030','23.040.45','91.140.80','23.040.20']",ISO/TC 138/SC 1,9599,,[80431],"['en','fr','ru']",5,<p>ISO 13266:2010 specifies a method of testing the resistan

53564,IS,,ISO 13267:2010,Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance,Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression — Éléments de fond de boîtes d'inspection et de branchement et de regards thermoplastiques — Méthode d'essai de résistance au flambage,2010-04-27,1,"['93.030','23.040.45','91.140.80','23.040.20']",ISO/TC 138/SC 1,9599,,[80430],"['en','fr','ru']",9,<p>ISO 13267:2010 specifies methods of test for the resistance of the base of thermoplastics inspection chambers and manholes to external

53565,IS,,ISO 13268:2010,Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of ring stiffness,Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression — Éléments de réhausse thermoplastiques pour chambres d'inspection et de branchement ou regards — Détermination de la rigidité annulaire,2010-05-27,1,"['93.030','23.040.45','91.140.80','23.040.20']",ISO/TC 138/SC 1,9599,,[80429],"['en','fr','ru']",9,<p>ISO 13268:2010 specifies a test method for assessing the initial (short-term) tangential ring stiffness of riser shafts

53583,IS,,ISO 13272:2011,"Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) — Specifications for manholes and inspection chambers in traffic areas and underground installations","Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression — Poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP), polypropylène avec modificateurs minéraux (PP-MD) et polyéthylène (PE) — Spécifications relatives aux regards et aux boîtes d'inspection et de branchement dans les zones de

21500,IS,,ISO 13276:1997,Tobacco and tobacco products — Determination of nicotine purity — Gravimetric method using tungstosilicic acid,Tabac et produits du tabac — Détermination de la pureté de la nicotine — Méthode gravimétrique à l'acide tungstosilicique,1997-04-10,1,['65.160'],ISO/TC 126,9599,,[62773],"['en','fr']",6,

62773,IS,,ISO 13276:2017,Tobacco and tobacco products — Determination of nicotine purity — Gravimetric method using tungstosilicic acid,Tabac et produits du tabac — Détermination de la pureté de la nicotine — Méthode gravimétrique à l'acide tungstosilicique,2017-05-10,2,['65.160'],ISO/TC 126,9599,[21500],[78092],"['en','fr']",6,"<p>ISO 13276:2017 specifies a method for the gravimetric determination of the purity of nicotine using tungstosilicic acid.</p><p>The method is applicable to pure nicotine or nicotine salts used to calibrate analytical methods for the determination of nicotine in the field of tobacco, tobacco products and smoke analysis.</p>"

5899,IS,,ISO 1328-1:1995,Cylindrical gears — ISO system of accuracy — Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth,Engrenages cylindriques — Système ISO de précision — Partie 1: Définitions et valeurs admissibles des écarts pour les flancs homologues de la denture,1995-02-16,1,['21.200'],ISO/TC 60,9599,[5898],[45309],"['en','fr']",27,"<p>Cancels and replaces ISO 1328 (1975). Establishes a system of accuracy relevant to corresponding flanks of individual cylindrical involute gears. Specifies appropriate definitions for gear tooth accuracy terms, the structure of the gear accuracy system and the allowable values of pitch deviations, tota

5898,IS,,ISO 1328:1975,Parallel involute gears — ISO system of accuracy,Engrenages parallèles à développante — Système ISO de précision,1975-02-01,3,['21.200'],ISO/TC 60,9599,[5897],[5899],"['en','fr']",35,

5900,IS,,ISO 1328-2:1997,Cylindrical gears — ISO system of accuracy — Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information,Engrenages cylindriques — Système ISO de précision — Partie 2: Définitions et valeurs admissibles des écarts composés radiaux et information sur le faux-rond,1997-07-31,1,['21.200'],ISO/TC 60,9599,,[70386],"['en','fr']",11,

34067,IS,,ISO 13284:2003,Fork-lift trucks — Fork-arm extensions and telescopic fork arms — Technical characteristics and strength requirements,Chariots élévateurs à fourche — Extensions de bras de fourche et bras de fourche télescopiques — Caractéristiques techniques et prescriptions de résistance,2003-02-03,1,['53.060'],ISO/TC 110/SC 2,9599,,[80192],"['en','fr']",8,"<p>ISO 13284:2002 specifies technical characteristics and strength requirements for fork-arm extensions and telescopic fork arms. It applies to fork-arm extensions and telescopic fork arms designed for use on stacking lift trucks, as defined in ISO 5053, having fork-arm carriers conforming to ISO 2328 and, in the case of fork-ar

80192,IS,,ISO 13284:2022,Industrial trucks — Fork arm extensions and telescopic fork arms — Technical characteristics and strength requirements,Chariots de manutention — Extensions de bras de fourche et bras de fourche télescopiques — Caractéristiques techniques et prescriptions de résistance,2022-08-12,2,['53.060'],ISO/TC 110/SC 2,9599,[34067],[88175],"['en','fr']",9,"<p>This document specifies technical characteristics and strength requirements for fork arm extensions and telescopic fork arms for industrial trucks. It applies to fork arm extensions and telescopic fork arms, as defined in ISO 5053‑2, designed for use on industrial trucks and stacking lift trucks, as defined in ISO 5053‑1, h

42977,IS,,ISO 13287:2006,Personal protective equipment — Footwear — Test method for slip resistance,Équipement de protection individuelle — Chaussures — Méthode d'essai pour la résistance au glissement,2006-02-23,1,['13.340.50'],ISO/TC 94/SC 3,9599,,[50943],"['en','fr']",13,"<p>ISO 13287:2006 specifies a method of test for the slip resistance of conventionally soled safety, protective and occupational footwear.</p><p>ISO 13287:2006 is not applicable to special purpose footwear containing spikes, metal studs or similar.</p>"

50943,IS,,ISO 13287:2012,Personal protective equipment — Footwear — Test method for slip resistance,Équipement de protection individuelle — Chaussures — Méthode d'essai pour la résistance au glissement,2012-10-10,2,['13.340.50'],ISO/TC 94/SC 3,9599,[42977],[74965],"['en','fr']",20,"<p>ISO 13287:2012 specifies a method of test for the slip resistance of PPE footwear. It is not applicable to special purpose footwear containing spikes, metal studs or similar.</p>"

21570,IS,,ISO 13291:1997,Zinc sulfide concentrates — Determination of zinc content — Solvent extraction and EDTA titrimetric method,Concentrés sulfurés de zinc — Dosage du zinc — Méthode par extraction à l'aide d'un solvant et titrage à l'EDTA,1997-11-20,1,['73.060.99'],ISO/TC 183,9599,,[37618],['en'],18,

21571,IS,,ISO 13292:1997,"Copper, lead and zinc sulfide concentrates — Experimental methods for checking the bias of sampling","Concentrés sulfurés de cuivre, de plomb et de zinc — Méthodes expérimentales de contrôle de l'erreur systématique d'échantillonnage",1997-11-20,1,['73.060.99'],ISO/TC 183,9599,,[41318],['en'],10,

20419,IS,,ISO 13294:1997,Dental handpieces — Dental air-motors,Pièces à main dentaires — Moteurs dentaires à air,1997-04-24,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[54805],"['en','fr']",11,

21574,IS,,ISO 13295:1994,Dental rotary instruments — Mandrels,Instruments rotatifs dentaires — Mandrins,1994-12-15,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[40369],"['en','fr']",3,"<p>Specifies requirements, packaging and marking for mandrels suitable for holding mounted and unmounted dental discs and polishers. Mandrels may be used for dental rotary instruments of different working diameters. For mandrels with mounted discs and polishers, the specification for the tread and screw do not apply.</p>"

21602,IS,,ISO 13296:1997,Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions,Moteurs diesels — Lignes assemblées d'injection de carburant haute pression — Exigences générales et dimensions,1997-12-25,1,['43.060.40'],ISO/TC 22,9599,,[36625],"['en','fr']",10,

33523,IS,Cor,ISO 13296:1997/Cor 1:2000,Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions — Technical Corrigendum 1,Moteurs diesels — Lignes assemblées d'injection de carburant haute pression — Exigences générales et dimensions — Rectificatif technique 1,2000-03-02,1,['43.060.40'],ISO/TC 22,9599,,[36625],"['en','fr']",2,

36625,IS,,ISO 13296:2005,Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions,Moteurs diesels — Lignes assemblées d'injection de carburant à haute pression — Exigences générales et dimensions,2005-03-01,2,['43.060.40'],ISO/TC 22,9599,"[21602,33523]",[52965],['en'],10,<p>ISO 13296:2005 specifies dimensions and requirements for high-pressure fuel injection pipe assemblies and assembled pipe sets used on diesel (compression-ignition) engines.</p>

52965,IS,,ISO 13296:2012,Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions,Moteurs diesels — Lignes assemblées d'injection de carburant à haute pression — Exigences générales et dimensions,2012-05-16,3,['43.060.40'],ISO/TC 22/SC 34,9599,[36625],[69501],['en'],12,

69501,IS,,ISO 13296:2016,Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions,Moteurs diesels — Lignes assemblées d'injection de carburant à haute pression — Exigences générales et dimensions,2016-12-14,4,['43.060.40'],ISO/TC 22/SC 34,9599,[52965],[85947],['en'],11,<p>ISO 13296:2016 specifies dimensions and requirements for high-pressure fuel injection pipe assemblies and assembled pipe sets for both integral and fabricated 60° female cones used on diesel (compression-ignition) engines.</p><p>NOTE Dimensions of integral and fabricated 60° female cone connectors are specified in ISO 2974.</p>

21603,IS,,ISO 13297:1995,Small craft — Electrical systems — Alternating current installations,Navires de plaisance — Systèmes électriques — Installations de distribution de courant alternatif,1995-11-30,1,['47.080'],ISO/TC 188,9599,,[27316],"['en','fr']",11,

27316,IS,,ISO 13297:2000,Small craft — Electrical systems — Alternating current installations,Petits navires — Systèmes électriques — Installations de distribution de courant alternatif,2000-12-07,2,['47.080'],ISO/TC 188,9599,[21603],[46477],"['en','fr']",16,

46477,IS,,ISO 13297:2012,Small craft — Electrical systems — Alternating current installations,Petits navires — Systèmes électriques — Installations à courant alternatif,2012-10-02,3,['47.080'],ISO/TC 188,9599,[27316],[66210],"['en','fr']",27,

66210,IS,,ISO 13297:2014,Small craft — Electrical systems — Alternating current installations,Petits navires — Systèmes électriques — Installations à courant alternatif,2014-12-05,4,['47.080'],ISO/TC 188,9599,[46477],[69551],"['en','fr']",27,"<p>ISO 13297:2014 specifies the requirements for the design, construction and installation of low-voltage alternating current electrical systems which operate at nominal voltages of less than 250 V single phase on small craft of hull length up to 24 m.</p><p>Additional information to be included in the owner's manual is listed.</p>"

37227,IS,,ISO 13299:2003,Sensory analysis — Methodology — General guidance for establishing a sensory profile,Analyse sensorielle — Méthodologie — Directives générales pour l'établissement d'un profil sensoriel,2003-03-03,1,['67.240'],ISO/TC 34/SC 12,9599,,[58042],"['en','fr']",24,"<p>ISO 13299:2003 describes the overall process for developing a sensory profile. Sensory profiles can be established for products such as foods and beverages, and can also be useful in studies of human cognition and behaviour. Some applications of sensory profiling are:</p><ul><li>to develop or change a product;</li><li>to define a product, production standard or trading standard in terms of its sensory attribute

3946,IS,,ISO 133:1983,"Rubber, vulcanized — Determination of crack growth (De Mattia)",Caoutchouc vulcanisé — Détermination de la résistance au développement d'une craquelure (De Mattia),1983-12-01,3,['83.060'],ISO/TC 45/SC 2,9599,,[25527],"['en','fr']",4,

36791,IS,,ISO 13301:2002,"Sensory analysis — Methodology — General guidance for measuring odour, flavour and taste detection thresholds by a three-alternative forced-choice (3-AFC) procedure","Analyse sensorielle — Méthodologie — Lignes directrices générales pour la mesure des seuils de détection d'odeur, de flaveur et de goût par une technique à choix forcé de 1 parmi 3 (3-AFC)",2002-09-26,1,['67.240'],ISO/TC 34/SC 12,9599,,[68901],"['en','fr']",27,"<p>ISO 13301 provides guidance on:</p><ul><li>obtaining data on the detection of chemical stimuli that evoke responses to odour, flavour and taste by a 3-AFC (three alternative forced choice) procedure;</li><li>the processing of the data to esti

53662,IS,,ISO 13304-1:2013,Radiological protection — Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation — Part 1: General principles,Radioprotection — Critères minimaux pour la spectroscopie par résonance paramagnétique électronique (RPE) pour la dosimétrie rétrospective des rayonnements ionisants — Partie 1: Principes généraux,2013-07-15,1,"['17.240','13.280']",ISO/TC 85/SC 2,9599,,[80725],"['en','fr']",18,"<p>The primary purpose of ISO 13304-1:2013 is to provide minimum acceptable criteria required to establish procedure of retrospective dosimetry by electron paramagnetic resonance spectroscopy and to report the results

21682,IS,,ISO 13312:1997,Iron ores — Determination of potassium content — Flame atomic absorption spectrometric method,Minerais de fer — Dosage du potassium — Méthode par spectrométrie d'absorption atomique dans la flamme,1997-04-10,1,['73.060.10'],ISO/TC 102/SC 2,9599,[13339],[39731],"['en','fr']",16,

39731,IS,,ISO 13312:2006,Iron ores — Determination of potassium —- Flame atomic absorption spectrometric method,Minerais de fer — Dosage du potassium — Méthode par spectrométrie d'absorption atomique dans la flamme,2006-05-17,2,['73.060.10'],ISO/TC 102/SC 2,9599,[21682],[71001],['en'],12,"<p>ISO 13312:2006 specifies a flame atomic absorption spectrometric method for the determination of the mass fraction of potassium in iron ores.</p><p>This method is applicable to mass fractions of potassium between 0,002 5 % and 0,52 % in natural iron ores, iron ore concentrates and agglomerates, including sinter products.</p>"

21683,IS,,ISO 13313:1997,Iron ores — Determination of sodium content — Flame atomic absorption spectrometric method,Minerais de fer — Dosage du sodium — Méthode par spectrométrie d'absorption atomique dans la flamme,1997-04-24,1,['73.060.10'],ISO/TC 102/SC 2,9599,[13339],[39732],"['en','fr']",16,

39732,IS,,ISO 13313:2006,Iron ores — Determination of sodium — Flame atomic absorption spectrometric method,Minerais de fer — Dosage du sodium — Méthode par spectrométrie d'absorption atomique dans la flamme,2006-05-12,2,['73.060.10'],ISO/TC 102/SC 2,9599,[21683],[71000],['en'],12,"<p>This International Standard specifies a flame atomic absorption spectrometric method for the determination of the mass fraction of sodium in iron ores.</p><p>This method is applicable to mass fractions of sodium between 0,002 5 % and 0,5 % in natural iron ores, iron ore concentrates and agglomerates, including sinter products.</p>"

53687,IS,,ISO 13315-1:2012,Environmental management for concrete and concrete structures — Part 1: General principles,Management environnemental du béton et des structures en béton — Partie 1: Principes généraux,2012-02-13,1,"['13.020.10','91.100.30','91.080.40']",ISO/TC 71/SC 8,9599,,"[82166,74737]",['en'],14,"<p><b>1 Scope</b></p><p>This part of ISO 13315 provides a framework and basic rules on environmental management related to</p><p>concrete and concrete structures. This includes the assessment of the environmental impacts and methods of</p><p>implementing environmental improvement based on the assessment.</p><p>This part of ISO 13315 is used when assessing the environmental impacts and

57645,IS,,ISO 13315-2:2014,Environmental management for concrete and concrete structures — Part 2: System boundary and inventory data,Management environnemental du béton et des structures en béton — Partie 2: Limite du système et données d'inventaire,2014-04-28,1,"['13.020.10','91.100.30','91.080.40']",ISO/TC 71/SC 8,9599,,[83794],['en'],28,"<p>ISO 13315-2:2014 provides a general framework, principles, and requirements related to the determination of system boundaries and the acquisition of inventory data necessary for conducting a life cycle assessment (LCA) of concrete, precast concrete, and concrete structures.</p>"

21703,IS,,ISO 13317-1:2001,Determination of particle size distribution by gravitational liquid sedimentation methods — Part 1: General principles and guidelines,Détermination de la distribution granulométrique par les méthodes de sédimentation par gravité dans un liquide — Partie 1: Principes généraux et lignes directrices,2001-05-10,1,['19.120'],ISO/TC 24/SC 4,9599,,"[78456,44939]","['en','fr']",17,

21704,IS,,ISO 13318-1:2001,Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 1: General principles and guidelines,Détermination de la distribution granulométrique par les méthodes de sédimentation centrifuge dans un liquide — Partie 1: Principes généraux et lignes directrices,2001-03-01,1,['19.120'],ISO/TC 24/SC 4,9599,,"[44940,78457]","['en','fr']",16,

31502,IS,,ISO 13318-2:2001,Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 2: Photocentrifuge method,Détermination de la distribution granulométrique par les méthodes de sédimentation centrifuge dans un liquide — Partie 2: Méthode photocentrifuge,2001-12-20,1,['19.120'],ISO/TC 24/SC 4,9599,,[45771],['en'],15,

21705,IS,,ISO 13319:2000,Determination of particle size distributions — Electrical sensing zone method,Détermination des répartitions granulométriques — Méthode de la zone de détection électrique,2000-04-13,1,['19.120'],ISO/TC 24/SC 4,9599,,[42354],"['en','fr']",30,

42354,IS,,ISO 13319:2007,Determination of particle size distributions — Electrical sensing zone method,Détermination des répartitions granulométriques — Méthode de la zone de détection électrique,2007-07-02,2,['19.120'],ISO/TC 24/SC 4,9599,[21705],[72565],['en'],37,"<p>ISO 13319:2007 gives guidance on the measurement of the size distribution of particles dispersed in an electrolyte solution using the electrical sensing zone method. The method measures pulse heights and their relationship to particle volumes or diameters, and it reports in the range from approximately 0,4 micrometres to approximately 1 200 micrometres. It does not address the specific requirements of the measurement of specif