Withdrawn and superseded ISO standards — page 33 of 246

78524,IS,Amd,ISO 12925-1:2018/Amd 1:2020,"Lubricants, industrial oils and related products (class L) — Family C (gears) — Part 1: Specifications for lubricants for enclosed gear systems — Amendment 1: Pour point, according to ISO 3016, of categories CKTG, CKES, CKPG and CKPR — Change of limits","Lubrifiants, huiles industrielles et produits connexes (classe L) — Famille C (engrenages) — Partie 1: Spécifications des lubrifiants pour systèmes d'engrenages sous carter — Amendement 1: Point d’écoulement selon l’ISO 3016 des catégories CKTG, CKES, CKPG et CKPR — Modifications des limites",2020-05-29,2,['75.100'],ISO/TC 28/SC 4,9599,,[87200],"['en','fr']",2,

52210,IS,,ISO 12931:2012,Performance criteria for authentication solutions used to combat counterfeiting of material goods,Critères de performance des solutions d'authentification utilisées pour combattre la contrefaçon des biens matériels,2012-05-31,1,['03.140'],ISO/TC 292,9599,,[50285],"['en','fr','ru']",28,"<p>ISO 12931:2012 specifies performance criteria and evaluation methodology for authentication solutions used to establish material good authenticity throughout the entire material good life cycle. It does not specify how technical solutions achieve these performance criteria.</p><p>ISO 12931:2012 is intended for all types and sizes of organizations that require the ability to validate

52219,IS,,ISO 12934:2013,Tractors and machinery for agriculture and forestry — Basic types — Vocabulary,Tracteurs et matériels agricoles et forestiers — Principaux types — Vocabulaire,2013-10-28,1,['65.060.01'],ISO/TC 23/SC 2,9599,,[72617],['en'],8,"<p>ISO 12934:2013 provides terms and definitions for agricultural field equipment designed primarily for use in agricultural operations for the production of food and fibre. (Other terms commonly used for 'agricultural field equipment' are 'farm machinery', 'farm implements', 'implements of husbandry' and 'agricultural machinery'.)</p><p>ISO 12934:2013 also applies to agricultural tractors used in forestry applications. Purpose-built forestry mac

1214,IS,,ISO 12944-1:1998,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction,Peintures et vernis — Anticorrosion des structures en acier par systèmes de peinture — Partie 1: Introduction générale,1998-05-21,1,['87.020'],ISO/TC 35/SC 14,9599,,[64833],"['en','fr']",6,

22404,IS,,ISO 12944-2:1998,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments,Peintures et vernis — Anticorrosion des structures en acier par systèmes de peinture — Partie 2: Classification des environnements,1998-05-21,1,['87.020'],ISO/TC 35/SC 14,9599,,[64834],"['en','fr']",8,

22405,IS,,ISO 12944-3:1998,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations,Peintures et vernis — Anticorrosion des structures en acier par systèmes de peinture — Partie 3: Conception et dispositions constructives,1998-05-21,1,['87.020'],ISO/TC 35/SC 14,9599,,[64835],"['en','fr']",13,

22406,IS,,ISO 12944-4:1998,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation,Peintures et vernis — Anticorrosion des structures en acier par systèmes de peinture — Partie 4: Types de surface et de préparation de surface,1998-05-21,1,['25.220.10'],ISO/TC 35/SC 14,9599,,[64836],"['en','fr']",21,

22407,IS,,ISO 12944-5:1998,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 5: Protective paint systems,Peintures et vernis — Anticorrosion des structures en acier par systèmes de peinture — Partie 5: Systèmes de peinture,1998-05-21,1,['87.020'],ISO/TC 35/SC 14,9599,,[41862],"['en','fr']",26,

41862,IS,,ISO 12944-5:2007,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 5: Protective paint systems,Peintures et vernis — Anticorrosion des structures en acier par systèmes de peinture — Partie 5: Systèmes de peinture,2007-09-18,2,['87.020'],ISO/TC 35/SC 14,9599,[22407],[57319],"['en','fr','ru']",28,"<p>ISO 12944-5:2007 describes the types of paint and paint system commonly used for corrosion protection of steel structures. It also provides guidance for the selection of paint systems available for different environments and different surface preparation grades, and the durability grade to be expected. The durability of paint systems is cl

57319,IS,,ISO 12944-5:2018,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 5: Protective paint systems,Peintures et vernis — Anticorrosion des structures en acier par systèmes de peinture — Partie 5: Systèmes de peinture,2018-02-12,3,['87.020'],ISO/TC 35/SC 14,9599,[41862],[77795],"['en','fr']",22,"<p>ISO 12944-5:2018 describes the types of paint and paint system commonly used for corrosion protection of steel structures.</p><p>ISO 12944-5:2018 also gives guidelines for the selection of paint systems available for different environments (see ISO 12944‑2) except for corrosivity category CX and category Im4 as defined in ISO 12944‑2 and differ

22408,IS,,ISO 12944-6:1998,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods,Peintures et vernis — Anticorrosion des structures en acier par systèmes de peinture — Partie 6: Essais de performance en laboratoire,1998-05-21,1,['87.020'],ISO/TC 35/SC 14,9599,,[51378],"['en','fr']",11,

22409,IS,,ISO 12944-7:1998,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work,Peintures et vernis — Anticorrosion des structures en acier par systèmes de peinture — Partie 7: Exécution et surveillance des travaux de peinture,1998-05-21,1,['87.020'],ISO/TC 35/SC 14,9599,,[64837],"['en','fr']",8,

22410,IS,,ISO 12944-8:1998,Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 8: Development of specifications for new work and maintenance,Peintures et vernis — Anticorrosion des structures en acier par systèmes de peinture — Partie 8: Développement de spécifications pour les travaux neufs et l'entretien,1998-05-21,1,['87.020'],ISO/TC 35/SC 14,9599,,[64838],"['en','fr']",39,

33509,IS,,ISO 12945-1:2000,Textiles — Determination of fabric propensity to surface fuzzing and to pilling — Part 1: Pilling box method,Textiles — Détermination de la propension des étoffes à l'ébouriffage en surface et au boulochage — Partie 1: Méthode de la boîte de boulochage,2000-12-21,1,['59.080.01'],ISO/TC 38/SC 24,9599,,[75374],"['en','fr']",7,

22776,IS,,ISO 12945-2:2000,Textiles — Determination of fabric propensity to surface fuzzing and to pilling — Part 2: Modified Martindale method,Textiles — Détermination de la propension des étoffes à l'ébouriffage en surface et au boulochage — Partie 2: Méthode Martindale modifiée,2000-06-22,1,['59.080.01'],ISO/TC 38/SC 24,9599,,[75375],"['en','fr']",13,

55060,IS,,ISO 12945-3:2014,"Textiles- Determination of the fabric propensity to surface pilling, fuzzing or matting — Part 3: Random tumble pilling method",Textiles - Détermination de la propension des étoffes à l'ébouriffage en surface et au boulochage — Partie 3: Méthode de boulochage par projections aléatoires dans une chambre cylindrique,2014-06-30,1,['59.080.01'],ISO/TC 38/SC 24,9599,,[75376],"['en','fr']",13,"<p>ISO 12945-3:2014 describes a method for the determination of the resistance to pilling, fuzzing, and matting of textile fabrics using the random tumble pilling tester. This method is applicable to most of woven and knitted fabrics, including napped fabrics (fleeces, inlay fabri

23619,IS,,ISO 12947-2:1998,Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown,Textiles — Détermination de la résistance à l'abrasion des étoffes par la méthode Martindale — Partie 2: Détermination de la détérioration de l'éprouvette,1998-12-20,1,['59.080.30'],ISO/TC 38/SC 24,9599,,[61058],"['en','fr']",11,

37373,IS,Cor,ISO 12947-2:1998/Cor 1:2002,Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown — Technical Corrigendum 1,Textiles — Détermination de la résistance à l'abrasion des étoffes par la méthode Martindale — Partie 2: Détermination de la détérioration de l'éprouvette — Rectificatif technique 1,2002-11-11,1,['59.080.30'],ISO/TC 38/SC 24,9599,,[61058],"['en','fr']",1,

1242,IS,,ISO 12951:1999,Textile floor coverings — Determination of mass loss using the Lisson test,Revêtements de sol textiles — Détermination de la perte de masse à l'aide de la machine Lisson,1999-10-07,1,['97.150'],ISO/TC 219,9599,,"[61665,46246]","['en','fr']",17,

61665,IS,,ISO 12951:2015,"Textile floor coverings — Determination of mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine","Revêtements de sol textiles — Détermination de la perte de masse, de la sensibilité au défibrage et du changement d'aspect au nez de marche à l'aide la machine Lisson Tretrad",2015-09-09,2,['97.150'],ISO/TC 219,9599,[1242],[73549],"['en','fr']",11,"<p>ISO 12951:2015 specifies four methods of test of textile floor coverings (with or without an underlay, see Clause 9) using the Lisson Tretrad machine.</p><p>- test A: determination of mass loss of textile floor coverings, also used to assess fibre bind of synthetic pile carpets;</p

1557,IS,,ISO 12952-1:1998,Textiles — Burning behaviour of bedding items — Part 1: General test methods for the ignitability by a smouldering cigarette,Textiles — Comportement au feu des articles de literie — Partie 1: Méthodes d'essai générales pour l'allumabilité par une cigarette en combustion,1998-12-20,1,"['13.220.40','97.160']",ISO/TC 38,9599,,[46259],"['en','fr']",10,

22779,IS,,ISO 12952-2:1998,Textiles — Burning behaviour of bedding items — Part 2: Specific test methods for the ignitability by a smouldering cigarette,Textiles — Comportement au feu des articles de literie — Partie 2: Méthodes d'essai spécifiques pour l'allumabilité par une cigarette en combustion,1998-12-20,1,"['13.220.40','97.160']",ISO/TC 38,9599,,[46259],"['en','fr']",5,

22780,IS,,ISO 12952-3:1998,Textiles — Burning behaviour of bedding items — Part 3: General test methods fot the ignitability by a small open flame,Textiles — Comportement au feu des articles de literie — Partie 3: Méthodes d'essai générales pour l'allumabilité par une petite flamme nue,1998-12-20,1,"['13.220.40','97.160']",ISO/TC 38,9599,,"[55986,46261]","['en','fr']",9,

22781,IS,,ISO 12952-4:1998,Textiles — Burning behaviour of bedding items — Part 4: Specific test methods for the ignitability by a small open flame,Textiles — Comportement au feu des articles de literie — Partie 4: Méthodes d'essai spécifiques pour l'allumabilité par une petite flamme nue,1998-12-20,1,"['13.220.40','97.160']",ISO/TC 38,9599,,"[55986,46261]","['en','fr']",4,

1503,IS,,ISO 12956:1999,Geotextiles and geotextile-related products — Determination of the characteristic opening size,Géotextiles et produits apparentés — Détermination de l'ouverture de filtration caractéristique,1999-03-04,1,['59.080.70'],ISO/TC 221,9599,,[54544],"['en','fr']",13,

54544,IS,,ISO 12956:2010,Geotextiles and geotextile-related products — Determination of the characteristic opening size,Géotextiles et produits apparentés — Détermination de l'ouverture de filtration caractéristique,2010-04-08,2,['59.080.70'],ISO/TC 221,9599,"[44165,1503]",[68308],"['en','fr']",10,<p>ISO:12956:2010 specifies a method for the determination of the characteristic size of the openings of a single layer of a geotextile or geotextile-related product using the wet-sieving principle.</p>

36939,IS,,ISO 12957-1:2005,Geosynthetics — Determination of friction characteristics — Part 1: Direct shear test,Géosynthétiques — Détermination des caractéristiques de frottement — Partie 1: Essai de cisaillement direct,2005-02-08,1,['59.080.70'],ISO/TC 221,9599,,[69498],"['en','fr']",8,"<p>ISO 12957-1:2005 describes a method of determining the friction characteristics of geotextiles and geotextile-related products in contact with a standard sand, i.e. sand with a specified density and moisture content, under a normal stress and at a constant rate of displacement, using a direct shear apparatus.</p><p>The procedure can also be used for testing geosynthetic barriers.</p>"

37997,IS,,ISO 12957-2:2005,Geosynthetics — Determination of friction characteristics — Part 2: Inclined plane test,Géosynthétiques — Détermination des caractéristiques de frottement — Partie 2: Essai sur plan incliné,2005-02-08,1,['59.080.70'],ISO/TC 221,9599,,[82434],"['en','fr']",10,"<p>ISO 12957-2:2005 describes a method of determining the friction characteristics of geosynthetics (geotextiles and geotextile-related products, geosynthetic barriers), in contact with soils, at low normal stress, using an inclining plane apparatus.</p><p>This method is primarily intended as a performance test to be used with site-specific soils but may also be used as an index test with standard sand.</p><p>

1125,IS,,ISO 12958:1999,Geotextiles and geotextile-related products — Determination of water flow capacity in their plane,Géotextiles et produits apparentés — Détermination de la capacité de débit dans leur plan,1999-03-04,1,['59.080.70'],ISO/TC 221,9599,,[54546],"['en','fr']",14,

54546,IS,,ISO 12958:2010,Geotextiles and geotextile-related products — Determination of water flow capacity in their plane,Géotextiles et produits apparentés — Détermination de la capacité de débit dans leur plan,2010-04-15,2,['59.080.70'],ISO/TC 221,9599,"[44166,1125]","[74632,70846,74633]","['en','fr']",13,<p>ISO 12958:2010 specifies a method for determining the constant-head water flow capacity within the plane of a geotextile or geotextile-related product.</p>

43172,IS,,ISO 12966-2:2011,Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 2: Preparation of methyl esters of fatty acids,Corps gras d'origines animale et végétale — Chromatographie en phase gazeuse des esters méthyliques d'acides gras — Partie 2: Préparation des esters méthyliques d'acides gras,2011-02-04,1,['67.200.10'],ISO/TC 34/SC 11,9599,[11560],[72142],"['en','fr','ru']",15,"<p>ISO 12966-2:2011 specifies methods of preparing the methyl esters of fatty acids.</p><p>It includes methods for preparing fatty acid methyl esters from animal and vegetable fats and oils, fatty acids and soaps. To cover different requirements four methylation methods ar

52289,IS,,ISO 12966-3:2009,Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 3: Preparation of methyl esters using trimethylsulfonium hydroxide (TMSH),Corps gras d'origines animale et végétale — Chromatographie en phase gazeuse des esters méthyliques d'acides gras — Partie 3: Préparation des esters méthyliques à l'aide d'hydroxyde de triméthylsulfonium (TMSH),2009-12-04,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[70249],"['en','fr','ru']",4,"<p>ISO 12966-3:2009 specifies a rapid base-catalysed transesterification method for fats and oils with trimethylsulfonium hydroxide to prepare fatty acid methyl esters. The method is exclusively applicable to the prepa

63503,IS,,ISO 12966-4:2015,Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 4: Determination by capillary gas chromatography,Corps gras d'origines animale et végétale — Chromatographie en phase gazeuse des esters méthyliques d'acides gras — Partie 4: Détermination par chromatographie capillaire en phase gazeuse,2015-06-01,1,['67.200.10'],ISO/TC 34/SC 11,9599,"[37794,35454,11558]","[84626,71849]","['en','fr']",21,"<p>ISO 12966-4:2015 specifies a method for the determination of fatty acid methyl esters (FAMEs) derived by transesterification or esterification from fats, oils, and fatty acids by capillary gas chromatography (GLC). Fatty acid methyl ester

50500,IS,,ISO 12967-1:2009,Health informatics — Service architecture — Part 1: Enterprise viewpoint,Informatique de santé — Architecture de service — Partie 1: Point de vue d'entreprise,2009-08-04,1,['35.240.80'],ISO/TC 215,9599,,[71037],"['en','fr']",51,"<p>ISO 12967-1:2009 provides guidance for the description, planning and development of new systems, as well as for the integration of existing information systems, both within one enterprise and across different healthcare organizations, through an architecture integrating the common data and business logic into a specific architectural layer (i.e. the middleware), distinct from individual applications and accessible throughout the whole in

51121,IS,,ISO 12967-2:2009,Health informatics — Service architecture — Part 2: Information viewpoint,Informatique de santé — Architecture de service — Partie 2: Point de vue d'information,2009-08-04,1,['35.240.80'],ISO/TC 215,9599,,[71038],"['en','fr']",58,"<p>ISO 12967-2:2009 specifies the fundamental characteristics of the information model to be implemented by a specific architectural layer (i.e. the middleware) of the information system to provide a comprehensive and integrated storage of the common enterprise data and to support the fundamental business processes of the healthcare organization, as defined in ISO 12967-1.</p><p>The information model is specified without any explicit or i

51122,IS,,ISO 12967-3:2009,Health informatics — Service architecture — Part 3: Computational viewpoint,Informatique de santé — Architecture de service — Partie 3: Point de vue informatique,2009-08-04,1,['35.240.80'],ISO/TC 215,9599,,[71039],"['en','fr']",27,"<p>ISO 12967-3:2009 specifies the fundamental characteristics of the computational model to be implemented by a specific architectural layer of the information system (i.e. the middleware) to provide a comprehensive and integrated interface to the common enterprise information and to support the fundamental business processes of the healthcare organization, as defined in ISO 12967-1. The computational model is specified without any expli

33096,IS,,ISO 12984:2000,Carbonaceous materials used in the production of aluminium — Calcined coke — Determination of particle size distribution,Produits carbonés utilisés pour la production de l'aluminium — Coke calciné — Détermination de la granulométrie,2000-07-20,1,['71.100.10'],ISO/TC 226,9599,,[69887],['en'],4,

33198,IS,,ISO 12985-1:2000,Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 1: Determination of apparent density using a dimensions method,Produits carbonés utilisés pour la production de l'aluminium — Anodes cuites et blocs cathodiques — Partie 1: Détermination de la masse volumique apparente par une méthode de mesurage dimensionnel,2000-06-01,1,['71.100.10'],ISO/TC 226,9599,,[69888],['en'],4,

33199,IS,,ISO 12985-2:2000,Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 2: Determination of apparent density and of open porosity using a hydrostatic method,Produits carbonés utilisés pour la production de l'aluminium — Anodes cuites et blocs cathodiques — Partie 2: Détermination de la masse volumique apparente et de la porosité ouverte par une méthode hydrostatique,2000-06-01,1,['71.100.10'],ISO/TC 226,9599,,[69889],['en'],5,

1996,IS,,ISO 12986-1:2000,Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 1: Determination of bending/shear strength by a three-point method,Produits carbonés utilisés pour la production de l'aluminium — Anodes précuites et blocs cathodiques — Partie 1: Détermination de la résistance à la flexion par une méthode trois points,2000-06-01,1,['71.100.10'],ISO/TC 226,9599,,[63047],['en'],4,

29857,IS,,ISO 12986-2:2005,Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 2: Determination of flexural strength by the four-point method,Produits carbonés utilisés pour la production de l'aluminium — Anodes précuites et blocs cathodiques — Partie 2: Détermination de la résistance à la flexion par la méthode quatre points,2005-02-02,1,['71.100.10'],ISO/TC 226,9599,,[52318],['en'],6,<p>ISO 12986-2:2005 specifies a four-point method to determine the flexural strength of carbon and solids graphite materials at room temperature.</p>

52318,IS,,ISO 12986-2:2009,Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocks — Part 2: Determination of flexural strength by the four-point method,Produits carbonés utilisés pour la production de l'aluminium — Anodes précuites et blocs cathodiques — Partie 2: Détermination de la résistance à la flexion par la méthode quatre points,2009-06-15,2,['71.100.10'],ISO/TC 226,9599,"[44650,29857]",[63048],['en'],7,<p>ISO 12986-2:2009 specifies a four-point method to determine the flexural strength of carbon and solid graphite materials at room temperature.</p>

1853,IS,,ISO 12992:1995,Plastics — Vertical flame spread determination for film and sheet,Plastiques — Détermination de la propagation verticale de la flamme sur films et feuilles,1995-12-21,1,"['83.080.01','13.220.40']",ISO/TC 61/SC 4,9599,,[65245],"['en','fr']",8,"<p>Deals with a test method for the measurement of flame spread properties of vertically oriented specimens of plastics in the form of film and sheet, 3 mm or less in thickness, subjected to a small igniting flame.</p>"

36492,IS,,ISO 12999-1:2014,Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 1: Sound insulation,Acoustique — Détermination et application des incertitudes de mesure dans l'acoustique des bâtiments — Partie 1: Isolation acoustique,2014-05-22,1,"['17.140.01','91.120.20']",ISO/TC 43/SC 2,9599,"[22857,3956]",[73930],"['en','fr']",20,"<p>ISO 12999-1:2014 specifies procedures for assessing the measurement uncertainty of sound insulation in building acoustics. It provides for a detailed uncertainty assessment, a determination of uncertainties by inter-laboratory tests, and an application of uncertainties.</p>"

20476,IS,,ISO 13000-1:1997,Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 1: Requirements and designation,Plastiques — Semi-produits en polytétrafluoroéthylène (PTFE) — Partie 1: Spécifications et désignation,1997-12-11,1,['83.140.01'],ISO/TC 61/SC 9,9599,,[37664],"['en','fr']",10,

37664,IS,,ISO 13000-1:2005,Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 1: Requirements and designation,Plastiques — Semi-produits en polytétrafluoroéthylène (PTFE) — Partie 1: Spécifications et désignation,2005-11-11,2,['83.140.01'],ISO/TC 61/SC 9,9599,[20476],[80331],"['en','fr']",11,"<p>ISO 13000-1:2005 specifies the requirements for processed unfilled polytetrafluoroethylene (PTFE) products which may occur in several forms. The PTFE used to make the semi-finished product is described in ISO 12086-1 and, as provided in ISO 12086-1, may contain up to 1 % of a comonomer. The PTFE used to make the semi-finished product may be virgin, reprocessed or recycled resin.

20477,IS,,ISO 13000-2:1997,Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 2: Preparation of test specimens and determination of properties,Plastiques — Semi-produits en polytétrafluoroéthylène (PTFE) — Partie 2: Préparation des éprouvettes et détermination des propriétés,1997-12-11,1,['83.140.01'],ISO/TC 61/SC 9,9599,,[37665],"['en','fr']",12,

37665,IS,,ISO 13000-2:2005,Plastics — Polytetrafluoroethylene (PTFE) semi-finished products — Part 2: Preparation of test specimens and determination of properties,Plastiques — Semi-produits en polytétrafluoroéthylène (PTFE) — Partie 2: Préparation des éprouvettes et détermination des propriétés,2005-11-11,2,['83.140.01'],ISO/TC 61/SC 9,9599,[20477],[80332],"['en','fr']",11,<p>ISO 13000-2:2005 specifies the preparation of test specimens and gives the test methods applicable to semi-finished products of polytetrafluoroethylene (PTFE).</p>

1732,IS,,ISO 13006:1998,"Ceramic tiles — Definitions, classification, characteristics and marking","Carreaux et dalles céramiques — Définitions, classification, caractéristiques et marquage",1998-12-03,1,"['91.100.23','01.040.91']",ISO/TC 189,9599,,[51063],"['en','fr']",56,

51063,IS,,ISO 13006:2012,"Ceramic tiles — Definitions, classification, characteristics and marking","Carreaux et dalles céramiques — Définitions, classification, caractéristiques et marquage",2012-03-05,2,"['91.100.23','01.040.91']",ISO/TC 189,9599,[1732],[63406],['en'],52,"<p>ISO 13006:2012 defines terms and establishes classifications, characteristics and marking requirements for ceramic tiles of the best commercial quality (first quality). ISO 13006:2012 is not applicable to tiles made by other than normal processes of extrusion or dry pressing. It is not applicable to decorative accessories or trim, such as edges, corners, skirting, capping, coves, beads, steps, curved tiles and other ac

34750,IS,,ISO 13007-1:2004,"Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives","Carreaux céramiques — Mortiers de joints et colles — Partie 1: Termes, définitions et spécifications relatives aux colles",2004-12-03,1,"['91.100.23','83.180']",ISO/TC 189,9599,,[54597],['en'],9,"<p>ISO 13007-1:2004 applies to ceramic tile adhesives for internal and external tile installations on walls and floors.</p><p>ISO 13007-1:2004 gives the terminology, concerning the products, working methods, application properties, etc., for ceramic tile adhesives.</p><p>ISO 13007-1:2004 specifies the values of performance requirements for all ceramic tile adhesives [cemen

43874,IS,Cor,ISO 13007-1:2004/Cor 1:2006,"Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives — Technical Corrigendum 1","Carreaux céramiques — Mortiers de joints et colles — Partie 1: Termes, définitions et spécifications relatives aux colles — Rectificatif technique 1",2006-01-20,1,"['91.100.23','83.180']",ISO/TC 189,9599,,[54597],['en'],1,

54597,IS,,ISO 13007-1:2010,"Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives","Carreaux céramiques — Mortiers de joints et colles — Partie 1: Termes, définitions et spécifications relatives aux colles",2010-09-06,2,"['91.100.23','83.180']",ISO/TC 189,9599,"[43874,34750]",[60880],['en'],8,"<p>ISO 13007-1:2010 defines terms concerning the products, working methods and application properties for ceramic tile adhesives. It specifies values of performance requirements for all ceramic tile adhesives [cementitious (C), dispersion (D) and reaction resin (R) adhesives].</p><p>ISO 13007-1:2010 is applicable to ceramic tile adhesives for internal and ex

34751,IS,,ISO 13007-2:2005,Ceramic tiles — Grouts and adhesives — Part 2: Test methods for adhesives,Carreaux céramiques — Mortiers de joints et colles — Partie 2: Méthodes d'essai pour les colles,2005-09-06,1,"['91.100.23','83.180']",ISO/TC 189,9599,,[54599],['en'],39,<p>ISO 13007-2:2005 specifies methods for determining characteristics for adhesives used in the installation of ceramic tiles. The following test methods are described: determination of open time; determination of slip; determination of shear adhesion strength; determination of tensile adhesion strength; determination of transverse deformation; and determination of chemical resistance.</p>

50169,IS,Cor,ISO 13007-2:2005/Cor 1:2007,Ceramic tiles — Grouts and adhesives — Part 2: Test methods for adhesives — Technical Corrigendum 1,Carreaux céramiques — Mortiers de joints et colles — Partie 2: Méthodes d'essai pour les colles — Rectificatif technique 1,2007-08-28,1,"['91.100.23','83.180']",ISO/TC 189,9599,,[54599],['en'],1,

54599,IS,,ISO 13007-2:2010,Ceramic tiles — Grouts and adhesives — Part 2: Test methods for adhesives,Carreaux céramiques — Mortiers de joints et colles — Partie 2: Méthodes d'essai pour les colles,2010-09-06,2,"['91.100.23','83.180']",ISO/TC 189,9599,"[34751,50169]",[60881],['en'],35,"<p>ISO 13007-2:2010 describes methods for determining characteristics for adhesives used in the installation of ceramic tiles. The test methods described are determination of open time, determination of slip, determination of shear adhesion strength, determination of tensile adhesion strength, determination of transverse deformation and determination of chemical resistance.</p>"

34752,IS,,ISO 13007-3:2004,"Ceramic tiles — Grouts and adhesives — Part 3: Terms, definitions and specifications for grouts","Carreaux céramiques — Mortiers de joints et colles — Partie 3: Termes, définitions et spécifications relatives aux mortiers de joints",2004-12-03,1,"['91.100.10','91.100.23']",ISO/TC 189,9599,,[54600],['en'],7,"<p>ISO 13007-3:2004 is applicable to ceramic tile grouts for internal and external tile installations on walls and floors.</p><p>ISO 13007-3:2004 establishes the terminology, concerning the products, working methods and application properties, etc. for ceramic tile grouts.</p><p>ISO 13007-3:2004 specifies the values of performance requirements for all ceramic t

34753,IS,,ISO 13007-4:2005,Ceramic tiles — Grouts and adhesives — Part 4: Test methods for grouts,Carreaux céramiques — Mortiers de joints et colles — Partie 4: Méthodes d'essai pour les mortiers de joints,2005-09-12,1,"['91.100.10','91.100.23']",ISO/TC 189,9599,,[54601],['en'],25,<p>ISO 13007-4:2005 specifies methods for determining characteristics for grouts used in the installation of ceramic tiles. The following test methods are described: determination of flexural and compressive strength; determination of water absorption; determination of shrinkage; determination of resistance to abrasion; determination of transverse deformation; and determination of chemical resistance.</p>

54601,IS,,ISO 13007-4:2010,Ceramic tiles — Grouts and adhesives — Part 4: Test methods for grouts,Carreaux céramiques — Mortiers de joints et colles — Partie 4: Méthodes d'essai pour les mortiers de joints,2010-09-06,2,"['91.100.10','91.100.23']",ISO/TC 189,9599,[34753],[60883],['en'],21,"<p>ISO 13007-4:2010 describes methods for determining characteristics of grouts used in the installation of ceramic tiles. The test methods described are determination of flexural and compressive strength, determination of water absorption, determination of shrinkage, determination of resistance to abrasion, determination of transverse deformation and determination of chemical resistance.</p>"

52326,IS,,ISO 13008:2012,Information and documentation — Digital records conversion and migration process,Information et documentation — Processus de conversion et migration des documents d'activité numériques,2012-06-13,1,['01.140.20'],ISO/TC 46/SC 11,9599,,[75569],['en'],28,"<p>This International Standard specifies the planning issues, requirements and procedures for the conversion</p><p>and/or migration of digital records (which includes digital objects plus metadata) in order to preserve the</p><p>authenticity, reliability, integrity and usability of such records as evidence of business transactions. These</p><p>digital records can be active or residing in a repository.</p><p>These proce

44912,IS,,ISO 13012-1:2009,Rolling bearings — Accessories for sleeve type linear ball bearings — Part 1: Boundary dimensions and tolerances for series 1 and 3,Roulements — Accessoires pour douilles à billes linéaires — Partie 1: Dimensions d'encombrement et tolérances pour les séries 1 et 3,2009-01-27,1,['21.100.20'],ISO/TC 4/SC 11,9599,"[31677,1700]",[68339],"['en','fr']",19,"<p>ISO 13012-1:2009 specifies the boundary dimensions, other relevant dimensions and their tolerances of accessories for sleeve type linear ball bearings which are specified in ISO 10285.</p><p>ISO 13012-1:2009 applies to: housings — closed and adjustable flangeless housings for series 1 sleeve type linear ball bearing

1700,IS,,ISO 13012:1998,"Rolling bearings, linear motion, recirculating ball, sleeve type — Accessories","Roulements à mouvement linéaire à recirculation de billes, douilles à billes — Accessoires",1998-04-23,1,['21.100.20'],ISO/TC 4/SC 11,9599,,"[42461,44912,32466]","['en','fr']",18,

31677,IS,Cor,ISO 13012:1998/Cor 1:1999,"Rolling bearings, linear motion, recirculating ball, sleeve type — Accessories — Technical Corrigendum 1","Roulements à mouvement linéaire à recirculation de billes, douilles à billes — Accessoires — Rectificatif technique 1",1999-04-08,1,['21.100.20'],ISO/TC 4/SC 11,9599,,"[42461,44912,32466]","['en','fr']",2,

44913,IS,,ISO 13012-2:2009,Rolling bearings — Accessories for sleeve type linear ball bearings — Part 2: Boundary dimensions and tolerances for series 5,Roulements — Accessoires pour douilles à billes linéaires — Partie 2: Dimensions d'encombrement et tolérances pour la série 5,2009-01-27,1,['21.100.20'],ISO/TC 4/SC 11,9599,,[68338],"['en','fr']",12,"<p>ISO 13012-2:2009 specifies the boundary dimensions, other relevant dimensions and their tolerances of accessories for sleeve type linear ball bearings which are specified in ISO 10285.</p><p>ISO 13012-2:2009 applies to: housings — closed and adjustable flangeless housings for series 5 sleeve type linear ball bearings, open and open adjustable

52350,IS,,ISO 13017:2012,Dentistry — Magnetic attachments,Médecine bucco-dentaire — Attaches magnétiques,2012-07-13,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[73578],"['en','fr']",9,"<p>ISO 13017:2012 specifies requirements and test methods for assessing the applicability of dental magnetic attachments that provide retention, support and stabilization of crowns and bridges, removable partial dentures, overdentures, superstructures of dental implants and orthodontic or maxillofacial prostheses including obturators.</p>"

63938,IS,Amd,ISO 13017:2012/Amd 1:2015,Dentistry — Magnetic attachments — Amendment 1,Médecine bucco-dentaire — Attaches magnétiques — Amendement 1,2015-11-13,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[73578],"['en','fr']",7,

5882,IS,,ISO 1302:1978,Technical drawings — Method of indicating surface texture on drawings,Dessins techniques — Indication des états de surface sur les dessins,1978-09-01,2,"['17.040.20','01.100.20']",ISO/TC 10,9599,,[5883],"['en','fr']",13,

5883,IS,,ISO 1302:1992,Technical drawings — Method of indicating surface texture,Dessins techniques — Indication des états de surface,1992-10-29,3,"['17.040.20','01.100.20']",ISO/TC 10/SC 6,9599,[5882],[28089],"['en','fr']",16,"<p>Specifies graphical symbols and additional indications of surface texture (basic symbol, modified basic symbols, indication of roughness, production method, waviness height, surface pattern, machining allowance). Annex A gives proportions and dimensions of the symbols, annex B gives synoptic tables, annex D includes examples.</p>"

28089,IS,,ISO 1302:2002,Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation,Spécification géométrique des produits (GPS) — Indication des états de surface dans la documentation technique de produits,2002-02-14,4,"['17.040.20','01.100.20']",ISO/TC 213,9599,[5883],[72196],"['en','fr']",46,"<p>This International Standard specifies the rules for the indication of surface texture in technical product documentation (e.g. drawings, specifications, contracts, reports) by means of graphical symbols and textual indications.</p><p>It is applicable to the indication of requirements for surfaces by means of profile parameters, according to ISO 4287,

52425,IS,,ISO 13032:2012,Petroleum products — Determination of low concentration of sulfur in automotive fuels — Energy-dispersive X-ray fluorescence spectrometric method,Produits pétroliers — Détermination de la teneur en soufre en faible concentration dans les carburants pour automobiles — Méthode spectrométrique de fluorescence de rayons X dispersive en énergie,2012-03-06,1,['75.160.20'],ISO/TC 28,9599,,[85096],"['en','fr']",12,

5884,IS,,ISO 1304:1974,Carbon black for use in the rubber industry — Determination of iodine adsorption number,Noir de carbone destiné à l'industrie des élastomères — Détermination de l'indice d'adsorption d'iode,1974-09-01,1,['83.040.20'],ISO/TC 45,9599,,[5885],"['en','fr']",4,

5885,IS,,ISO 1304:1985,Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number — Titrimetric method,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de l'indice d'adsorption d'iode — Méthode titrimétrique,1985-08-08,2,['83.040.20'],ISO/TC 45/SC 3,9599,[5884],[27009],"['en','fr']",4,

27009,IS,,ISO 1304:1999,Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number — Titrimetric method,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de l'indice d'adsorption d'iode — Méthode titrimétrique,1999-03-25,3,['83.040.20'],ISO/TC 45/SC 3,9599,[5885],[40162],"['en','fr']",12,

40162,IS,,ISO 1304:2006,Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination de l'indice d'adsorption d'iode,2006-02-09,4,['83.040.20'],ISO/TC 45/SC 3,9599,[27009],[68066],"['en','fr']",13,<p>ISO 1304:2006 specifies methods for the determination of iodine adsorption number of carbon blacks for use in the rubber industry. Two titration methods are described:</p><ul><li>method A: titration using a burette and starch as indicator;</li><li>method B: potentiometric titration with an automatic titrator.</li></ul>

34654,IS,,ISO 13041-1:2004,Test conditions for numerically controlled turning machines and turning centres — Part 1: Geometric tests for machines with a horizontal workholding spindle,Conditions d'essai des tours à commande numérique et des centres de tournage — Partie 1: Essais géométriques pour les machines à broche horizontale,2004-03-05,1,['25.040.20'],ISO/TC 39/SC 2,9599,,[69009],"['en','fr']",34,"<p>ISO 13041-1:2004 specifies, with reference to ISO 230-1:1996, the geometric tests on numerically controlled (NC) turning machines and turning centres, of normal accuracy, with horizontal work spindle(s).</p><p>ISO 13041-1:2004 specifies the applicable tolerances corresponding to the tests m

43027,IS,,ISO 13041-2:2008,Test conditions for numerically controlled turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding spindle,Conditions d'essai des tours à commande numérique et des centres de tournage — Partie 2: Essais géométriques pour les machines à broche verticale,2008-10-08,1,['25.040.20'],ISO/TC 39/SC 2,9599,,"[62947,73489]","['en','fr']",36,"<p>ISO 13041-2:2008 specifies, with reference to ISO 230-1 and ISO 230-7, the geometric tests on general purpose numerically controlled (NC) turning machines and tuning centres with vertical workholding spindles, as well as the corresponding applicable tolerances.</p><p>ISO 13041-2:2008 ex

34659,IS,,ISO 13041-5:2006,"Test conditions for numerically controlled turning machines and turning centres — Part 5: Accuracy of feeds, speeds and interpolations","Conditions d'essai des tours à commande numérique et des centres de tournage — Partie 5: Exactitude des vitesses, avances et interpolations",2006-12-04,1,['25.040.20'],ISO/TC 39/SC 2,9599,,[56623],"['en','fr']",9,"<p>ISO 13041-5:2006 specifies, with reference to ISO 230-1, certain kinematic tests for numercially controlled (NC) turning machines and turning centres, concerning the spindle speeds, the feeds of the individual NC linear axes and the accuracy of the paths described by the simultaneous movement of two or more NC linear

34660,IS,,ISO 13041-6:2005,Test conditions for numerically controlled turning machines and turning centres — Part 6: Accuracy of a finished test piece,Conditions d'essai des tours à commande numérique et des centres de tournage — Partie 6: Exactitude d'une pièce d'essai usinée,2005-03-01,1,['25.040.20'],ISO/TC 39/SC 2,9599,,[46439],"['en','fr']",12,"<p>ISO 13041-6:2005 specifies, with reference to ISO 230-1, a series of cutting tests, under finishing conditions, of standard test pieces as well as the characteristics and dimensions of the test pieces themselves. It is intended to supply minimum requirements for assessing the cutting accuracy of the machine.</p>"

52451,IS,,ISO 13044-2:2013,Road vehicles — Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations — Part 2: 50 mm fifth wheel couplings — Electrical and pneumatic interface,Véhicules routiers — Dispositifs d'attelage entièrement automatiques 24 V (FACS) pour ensembles routiers lourds — Partie 2: Sellettes d'attelage pour pivot de 50 mm — Interface électrique et pneumatique,2013-08-08,1,['43.040.70'],ISO/TC 22/SC 40,9599,,[77970],['en'],27,"<p>ISO 13044-2:2013 specifies the mechanical, electrical/electronic and pneumatic characteristics of a fully automated fifth wheel coupling system to ensure interchangeability between a tractor vehicle and a coupled semi-tra

1278,IS,,ISO 13050:1999,Curvilinear toothed synchronous belt drive systems,Transmissions par courroies synchrones à denture curviligne,1999-12-16,1,['21.220.10'],ISO/TC 41/SC 4,9599,,"[60482,41583]","['en','fr']",37,

60482,IS,,ISO 13050:2014,"Synchronous belt drives — Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys","Transmissions synchrones — Pas métrique, systèmes à denture curviligne G, H, R et S, courroies et poulies",2014-11-17,2,['21.220.10'],ISO/TC 41/SC 4,9599,[1278],[82453],['en'],54,"<p>ISO 13050:2014 specifies the principal characteristics of metric pitch curvilinear synchronous endless belts and pulleys in G, H, R, and S profile systems for use in synchronous belt drives (also known in the past as timing belt drives, positive belt drives, gear belt drives) for mechanical power transmission and where positive indexing or synchronization might be required.</p><p>The p

5886,IS,,ISO 1306:1981,Rubber compounding ingredients — Carbon black (pelletized) — Determination of pour density,Ingrédients de mélange du caoutchouc — Noir de carbone (en granules) — Détermination de la masse volumique apparente,1981-12-01,2,['83.040.20'],ISO/TC 45,9599,,[5887],"['en','fr']",1,

5887,IS,,ISO 1306:1987,Rubber compounding ingredients — Carbon black (pelletized) — Determination of pour density,Ingrédients de mélange du caoutchouc — Noir de carbone (en granules) — Détermination de la masse volumique apparente,1987-07-09,3,['83.040.20'],ISO/TC 45/SC 3,9599,[5886],[21883],['en'],1,

60075,IS,,ISO 13061-13:2016,Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 13: Determination of radial and tangential shrinkage,Propriétés physiques et mécaniques du bois — Méthodes d'essais sur petites éprouvettes de bois sans défauts — Partie 13: Détermination des retraits radial et tangentiel,2016-11-14,1,['79.040'],ISO/TC 218,9599,[10364],[86120],"['en','fr']",4,<p>ISO 13061-13:2016 specifies a method for the determination of linear shrinkage in the radial and tangential directions of wood.</p>

60076,IS,,ISO 13061-14:2016,Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 14: Determination of volumetric shrinkage,Propriétés physiques et mécaniques du bois — Méthodes d'essais sur petites éprouvettes de bois sans défauts — Partie 14: Détermination du retrait volumique,2016-11-14,1,['79.040'],ISO/TC 218,9599,[10840],[86119],"['en','fr']",5,<p>ISO 13061-14:2016 specifies methods for the determination of volumetric shrinkage of wood.</p>

60077,IS,,ISO 13061-15:2017,Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 15: Determination of radial and tangential swelling,Propriétés physiques et mécaniques du bois — Méthodes d'essais sur petites éprouvettes de bois sans défauts — Partie 15: Détermination du gonflement radial et tangentiel,2017-07-18,1,['79.040'],ISO/TC 218,9599,[10841],[88783],['en'],3,<p>ISO 13061-15:2017 specifies a method for the determination of linear swelling in the radial and tangential directions of wood.</p>

60078,IS,,ISO 13061-16:2017,Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 16: Determination of volumetric swelling,Propriétés physiques et mécaniques du bois — Méthodes d'essais sur petites éprouvettes de bois sans défauts — Partie 16: Détermination du gonflement volumique,2017-07-18,1,['79.040'],ISO/TC 218,9599,[10842],[88784],['en'],4,<p>ISO 13061-16:2017 specifies methods for the determination of volumetric swelling of wood.</p>

52522,IS,,ISO 13063:2012,Electrically propelled mopeds and motorcycles — Safety specifications,Cyclomoteurs et motocycles à propulsion électrique — Spécifications de sécurité,2012-09-14,1,['43.140'],ISO/TC 22/SC 38,9599,,"[77212,75155,77213]",['en'],22,"<p>ISO 13063:2012 specifies requirements for functional safety means, protection against electric shock and the on-board rechargeable energy storage systems intended for the propulsion of any kind of electrically propelled mopeds and motorcycles when used in normal conditions.</p><p>It is applicable only if maximum working voltage of the on-board electrical circuit does not exceed 1000 V a.c. or 1500 V d.c.</p><p>It does not provide comprehen

52535,IS,,ISO 13067:2011,Microbeam analysis — Electron backscatter diffraction — Measurement of average grain size,Analyse par microfaisceaux — Diffraction d'électrons rétrodiffusés — Mesurage de la taille moyenne des grains,2011-10-28,1,['71.040.50'],ISO/TC 202,9599,,[74309],"['en','fr']",18,

5888,IS,,ISO 1307:1975,Withdrawal of ISO 1307-1975,Annulation de l'ISO 1307-1975,1975-06-01,1,['23.040.70'],ISO/TC 45/SC 1,9599,,"[5889,14598]","['en','fr']",1,

5889,IS,,ISO 1307:1983,Rubber and plastics hoses — Bore diameters and tolerances on length,Tuyaux en caoutchouc et plastique — Diamètres intérieurs et tolérances sur la longueur,1983-08-01,2,['23.040.70'],ISO/TC 45/SC 1,9599,[5888],[5890],"['en','fr']",1,

5890,IS,,ISO 1307:1992,"Rubber and plastics hoses for general-purpose industrial applications — Bore diameters and tolerances, and tolerances on length","Tuyaux en caoutchouc et en plastique à usage général dans les applications industrielles — Diamètres intérieurs et leurs tolérances, et tolérances sur la longueur",1992-07-02,3,['23.040.70'],ISO/TC 45/SC 1,9599,[5889],[41421],"['en','fr']",2,<p>Rubber and plastics hoses for hydraulic and automotive applications are not included. Is to be used only if the relevant product standard does not list its own specific diameters and tolerances.</p>

55361,IS,,ISO 13076:2012,Paints and varnishes — Lighting and procedure for visual assessments of coatings,Peintures et vernis — Éclairage et mode opératoire pour évaluations visuelles des revêtements,2012-06-29,1,['87.040'],ISO/TC 35/SC 9,9599,,[76049],"['en','fr']",5,"<p>ISO 13076:2012 specifies the lighting and procedure for the visual assessment of degraded areas, spots or other defects on or in coatings after exposure to ageing or weathering influences.</p><p>It is not applicable to the visual comparison of colour, which may be assessed using ISO 3668.</p>"

52695,IS,,ISO 13084:2011,Surface chemical analysis — Secondary-ion mass spectrometry — Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer,Analyse chimique des surfaces — Spectrométrie de masse des ions secondaires — Étalonnage de l'échelle de masse pour un spectromètre de masse des ions secondaires à temps de vol,2011-05-05,1,['71.040.40'],ISO/TC 201/SC 6,9599,,[73133],['en'],10,<p>ISO 13084:2011 specifies a method to optimize the mass calibration accuracy in time-of-flight SIMS instruments used for general analytical purposes. It is only applicable to time-of-flight instruments but is not restricted to any particular instrument design. Guidance is provided fo

73133,IS,,ISO 13084:2018,Surface chemical analysis — Secondary ion mass spectrometry — Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer,Analyse chimique des surfaces — Spectrométrie de masse des ions secondaires — Étalonnage de l'échelle de masse pour un spectromètre de masse des ions secondaires à temps de vol,2018-11-15,2,['71.040.40'],ISO/TC 201/SC 6,9599,[52695],[90332],['en'],15,<p>This document specifies a method to optimize the mass calibration accuracy in time-of-flight secondary ion mass spectrometry (SIMS) instruments used for general analytical purposes. It is only applicable to time-of-flight instruments but is not restricted to any particular in

27716,IS,,ISO 13091-2:2003,Mechanical vibration — Vibrotactile perception thresholds for the assessment of nerve dysfunction — Part 2: Analysis and interpretation of measurements at the fingertips,Vibrations mécaniques — Seuils de perception vibrotactile pour l'évaluation des troubles neurologiques — Partie 2: Analyse et interprétation des mesures obtenues à la pulpe des doigts,2003-08-19,1,['13.160'],ISO/TC 108/SC 4,9599,,[76366],"['en','fr']",24,"<p>ISO 13091-2:2003 specifies methods and procedures for analysing and interpreting vibrotactile perception thresholds and threshold shifts. Procedures for describing statistically significant changes in vibrotactile perception thresholds are reco

52832,IS,,ISO 13099-2:2012,Colloidal systems — Methods for zeta-potential determination — Part 2: Optical methods,Systèmes colloïdaux — Méthodes de détermination du potentiel zêta — Partie 2: Méthodes optiques,2012-06-18,1,['19.120'],ISO/TC 24/SC 4,9599,,[86762],['en'],19,"<p>This part of ISO 13099 specifies two methods of measurement of electrophoretic mobility of particles suspended in a liquid: video microscopy and electrophoretic light-scattering. Estimation of surface charge and determination of zeta-potential can be achieved from measured electrophoretic mobility using proper theoretical models, which are described in detail in ISO 13099-1.</p>"

5891,IS,,ISO 1310:1974,Carbon black for use in the rubber industry — Sampling packaged shipments,Noir de carbone livré en sacs pour l'industrie des élastomères — Échantillonnage,1974-02-01,1,['83.040.20'],ISO/TC 45/SC 3,9599,,[5653],"['en','fr']",2,

57236,IS,,ISO 13105-1:2014,Building construction machinery and equipment — Machinery for concrete surface floating and finishing — Part 1: Terms and commercial specifications,Machines et matériels pour la construction des bâtiments — Talocheuses-lisseuses de mortier — Partie 1: Terminologie et spécifications commerciales,2014-11-19,1,"['91.220','01.040.91']",ISO/TC 195/SC 1,9599,,[84914],['en'],6,"<p>ISO 13105-1:2014 defines terms and commercial specifications for machines used for concrete surface floating and finishing (also known as power trowels). This includes pedestrian-controlled equipment and ride-on equipment. It does not address strike-off type machines, commonly known as screeds.<

62285,IS,,ISO 13105-2:2014,Building construction machinery and equipment — Machinery for concrete surface floating and finishing — Part 2: Safety requirements and verification,Machines et matériels pour la construction des bâtiments — Talocheuses-lisseuses de mortier — Partie 2: Les exigences de sécurité et de vérification,2014-11-19,1,"['91.220','13.110']",ISO/TC 195/SC 1,9599,,[84915],['en'],14,"<p>ISO 13105-2:2014 specifies safety requirements for machines used for concrete surface floating and finishing. This includes pedestrian-controlled equipment and ride-on equipment. It is not applicable to internal or external vibrators or ancillary equipment used with internal and external vibr