Withdrawn and superseded ISO standards — page 30 of 246

51088,IS,,ISO 124:2008,"Latex, rubber — Determination of total solids content",Latex de caoutchouc — Détermination des matières solides totales,2008-09-10,5,['83.040.10'],ISO/TC 45/SC 3,9599,"[42824,43711,23842]",[59264],"['en','fr']",7,"<p>ISO 124:2008 specifies methods for the determination of the total solids content of natural rubber latex concentrate and synthetic rubber latices. These methods are not necessarily suitable for latex from natural sources other than the <i>Hevea Brasiliensis</i>, for vulcanized latex, for compounded latex or for artificial dispersions of rubber.</p>"

59264,IS,,ISO 124:2011,"Latex, rubber — Determination of total solids content",Latex de caoutchouc — Détermination des matières solides totales,2011-11-10,6,['83.040.10'],ISO/TC 45/SC 3,9599,[51088],[61884],"['en','fr']",7,"<p>ISO 124:2011 specifies methods for the determination of the total solids content of natural rubber latex concentrate and synthetic rubber latices. These methods are not necessarily suitable for latex from natural sources other than the <i>Hevea brasiliensis</i>, for vulcanized latex, for compounded latex or for artificial dispersions of rubber.</p>"

35358,IS,,ISO 12401:2004,Small craft — Deck safety harness and safety line for use on recreational craft — Safety requirements and test methods,Petits navires — Harnais de sécurité de pont et sauvegardes de harnais destinés à la navigation de plaisance — Exigences de sécurité et méthodes d'essai,2004-01-07,1,['47.080'],ISO/TC 188,9599,,[46213],"['en','fr']",15,"<p>ISO 12401:2004 specifies the requirements for performance, sizing, marking and test methods for deck safety harnesses and safety lines. </p><p>It is applicable to harnesses and lines which are intended to be worn by all persons when in the exposed cockpit or on the working deck of a recreational vessel afloat.</p><p>It is not appli

41378,IS,,ISO 12402-1:2005,Personal flotation devices — Part 1: Lifejackets for seagoing ships — Safety requirements,Équipements individuels de flottabilité — Partie 1: Gilets de sauvetage pour navires de haute mer — Exigences de sécurité,2005-09-16,1,['13.340.70'],ISO/TC 188/SC 1,9599,,"[92712,60333]","['en','fr']",13,<p>ISO 12402-1:2005 specifies the safety requirements for lifejackets intended for use on seagoing ships with regard to the technical provisions of the International Convention for the Safety of Life at Sea.</p>

40773,IS,,ISO 12402-10:2006,Personal flotation devices — Part 10: Selection and application of personal flotation devices and other relevant devices,Équipements individuels de flottabilité — Partie 10: Sélection et application des équipements individuels de flottabilité et d'autres équipements pertinents,2006-02-09,1,['13.340.70'],ISO/TC 188/SC 1,9599,[31181],[60336],"['en','fr']",18,<p>ISO 12402-10:2006 gives guidance for the selection and application of personal flotation devices complying with the other relevant parts of ISO 12402 and immersion suits according to ISO 15027-1 to ISO 15027-3.</p>

41379,IS,,ISO 12402-2:2006,"Personal flotation devices — Part 2: Lifejackets, performance level 275 — Safety requirements","Équipements individuels de flottabilité — Partie 2: Gilets de sauvetage, niveau de performance 275 — Exigences de sécurité",2006-08-24,1,['13.340.70'],ISO/TC 188/SC 1,9599,,[60334],"['en','fr']",16,"<p>ISO 12402-2:2006 specifies the safety requirements for lifejackets, performance level 275. It applies to lifejackets for adults and children for offshore use under extreme conditions.</p>"

51023,IS,Amd,ISO 12402-2:2006/Amd 1:2010,"Personal flotation devices — Part 2: Lifejackets, performance level 275 — Safety requirements — Amendment 1","Équipements individuels de flottabilité — Partie 2: Gilets de sauvetage, niveau de performance 275 — Exigences de sécurité — Amendement 1",2010-05-21,1,['13.340.70'],ISO/TC 188/SC 1,9599,,[60334],"['en','fr']",2,

41380,IS,,ISO 12402-3:2006,"Personal flotation devices — Part 3: Lifejackets, performance level 150 — Safety requirements","Équipements individuels de flottabilité — Partie 3: Gilets de sauvetage, niveau de performance 150 — Exigences de sécurité",2006-08-24,1,['13.340.70'],ISO/TC 188/SC 1,9599,,[56683],"['en','fr']",16,"<p>ISO 12402-3:2006 specifies the safety requirements for lifejackets, performance level 150. It applies to lifejackets used by adults or children.</p>"

51215,IS,Amd,ISO 12402-3:2006/Amd 1:2010,"Personal flotation devices — Part 3: Lifejackets, performance level 150 — Safety requirements — Amendment 1","Équipements individuels de flottabilité — Partie 3: Gilets de sauvetage, niveau de performance 150 — Exigences de sécurité — Amendement 1",2010-05-21,1,['13.340.70'],ISO/TC 188/SC 1,9599,,[56683],"['en','fr']",2,

41381,IS,,ISO 12402-4:2006,"Personal flotation devices — Part 4: Lifejackets, performance level 100 — Safety requirements","Équipements individuels de flottabilité — Partie 4: Gilets de sauvetage, niveau de performance 100 — Exigences de sécurité",2006-08-24,1,['13.340.70'],ISO/TC 188/SC 1,9599,,[56684],"['en','fr']",16,"<p>ISO 12402-4:2006 specifies the safety requirements for lifejackets, performance level 100. It applies to lifejackets used by adults or children.</p>"

51216,IS,Amd,ISO 12402-4:2006/Amd 1:2010,"Personal flotation devices — Part 4: Lifejackets, performance level 100 — Safety requirements — Amendment 1","Équipements individuels de flottabilité — Partie 4: Gilets de sauvetage, niveau de performance 100 — Exigences de sécurité — Amendement 1",2010-05-21,1,['13.340.70'],ISO/TC 188/SC 1,9599,,[56684],"['en','fr']",2,

41382,IS,,ISO 12402-5:2006,Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements,Équipements individuels de flottabilité — Partie 5: Aides à la flottabilité (niveau 50) — Exigences de sécurité,2006-08-24,1,['13.340.70'],ISO/TC 188/SC 1,9599,,[56685],"['en','fr']",15,<p>ISO 12402-5:2006 specifies the safety requirements for buoyancy aids with a buoyancy of not less than 50 N used in sheltered waters with help and rescue close at hand under such circumstances where more bulky or buoyant devices can impair the user's activity. It applies to buoyancy aids used by adults or children. ISO 12402-5:2006 is not applicable to one-piece suits.</p>

51217,IS,Amd,ISO 12402-5:2006/Amd 1:2010,Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements — Amendment 1,Équipements individuels de flottabilité — Partie 5: Aides à la flottabilité (niveau 50) — Exigences de sécurité — Amendement 1,2010-05-21,1,['13.340.70'],ISO/TC 188/SC 1,9599,,[56685],"['en','fr']",2,

45338,IS,Cor,ISO 12402-5:2006/Cor 1:2006,Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements — Technical Corrigendum 1,Équipements individuels de flottabilité — Partie 5: Aides à la flottabilité (niveau 50) — Exigences de sécurité — Rectificatif technique 1,2006-12-01,1,['13.340.70'],ISO/TC 188/SC 1,9599,,[56685],"['en','fr']",1,

40776,IS,,ISO 12402-6:2006,Personal flotation devices — Part 6: Special purpose lifejackets and buoyancy aids — Safety requirements and additional test methods,Équipements individuels de flottabilité — Partie 6: Gilets de sauvetage et aides à la flottabilité pour usages spéciaux — Exigences de sécurité et méthodes d'essai complémentaires,2006-09-12,1,['13.340.70'],ISO/TC 188/SC 1,9599,,[56686],"['en','fr']",17,<p>ISO 12402-6:2006 specifies the safety requirements and additional test methods for special purpose lifejackets and buoyancy aids (referred to as special purpose devices within ISO 12402-6:2006) in combination with the requirements specified in ISO 12402-2 to ISO 12402-5. It applies

51218,IS,Amd,ISO 12402-6:2006/Amd 1:2010,Personal flotation devices — Part 6: Special purpose lifejackets and buoyancy aids — Safety requirements and additional test methods — Amendment 1,Équipements individuels de flottabilité — Partie 6: Gilets de sauvetage et aides à la flottabilité pour usages spéciaux — Exigences de sécurité et méthodes d'essai complémentaires — Amendement 1,2010-05-21,1,['13.340.70'],ISO/TC 188/SC 1,9599,,[56686],"['en','fr']",3,

40716,IS,,ISO 12402-7:2006,Personal flotation devices — Part 7: Materials and components — Safety requirements and test methods,Équipements individuels de flottabilité — Partie 7: Matériaux et composants — Exigences de sécurité et méthodes d'essai,2006-11-15,1,['13.340.70'],ISO/TC 188/SC 1,9599,,[56687],"['en','fr']",79,<p>ISO 12402-7:2006 specifies the minimum requirements for construction and performance of materials and components of personal flotation devices as well as relevant test methods.</p>

51219,IS,Amd,ISO 12402-7:2006/Amd 1:2011,Personal flotation devices — Part 7: Materials and components — Safety requirements and test methods — Amendment 1,Équipements individuels de flottabilité — Partie 7: Matériaux et composants — Exigences de sécurité et méthodes d'essai — Amendement 1,2011-03-29,1,['13.340.70'],ISO/TC 188/SC 1,9599,,[56687],"['en','fr']",21,

41383,IS,,ISO 12402-8:2006,Personal flotation devices — Part 8: Accessories — Safety requirements and test methods,Équipements individuels de flottabilité — Partie 8: Accessoires — Exigences de sécurité et méthodes d'essai,2006-01-27,1,['13.340.70'],ISO/TC 188/SC 1,9599,,[60335],"['en','fr']",10,"<p>ISO 12402-8:2006 specifies the safety requirements and test methods for accessories used for personal flotation devices (PFDs), with regard to the technical provisions of the International Convention for the Safety of Life at Sea (SOLAS).</p>"

51220,IS,Amd,ISO 12402-8:2006/Amd 1:2011,Personal flotation devices — Part 8: Accessories — Safety requirements and test methods — Amendment 1,Équipements individuels de flottabilité — Partie 8: Accessoires — Exigences de sécurité et méthodes d'essai — Amendement 1,2011-03-29,1,['13.340.70'],ISO/TC 188/SC 1,9599,,[60335],"['en','fr']",4,

41987,IS,,ISO 12402-9:2006,Personal flotation devices — Part 9: Test methods,Équipements individuels de flottabilité — Partie 9: Méthodes d'essai,2006-08-24,1,['13.340.70'],ISO/TC 188/SC 1,9599,,[56688],"['en','fr']",68,<p>ISO 12402-9:2006 specifies the test methods for personal flotation devices.</p>

51221,IS,Amd,ISO 12402-9:2006/Amd 1:2011,Personal flotation devices — Part 9: Test methods — Amendment 1,Équipements individuels de flottabilité — Partie 9: Méthodes d'essai — Amendement 1,2011-03-29,1,['13.340.70'],ISO/TC 188/SC 1,9599,,[56688],"['en','fr']",13,

51407,IS,,ISO 12404:2011,Soil quality — Guidance on the selection and application of screening methods,Qualité du sol — Lignes directrices pour la sélection et l'application des méthodes de diagnostic rapide,2011-12-15,1,['13.080.10'],ISO/TC 190/SC 3,9599,,[75242],"['en','fr']",12,"<p>This International Standard provides guidance on the selection and application of screening methods for</p><p>assessing soil quality. Guidance is given to choose an appropriate screening method for a specific parameter</p><p>and defines the conditions under which they can be used.</p><p>This International Standard does not recommend any particular screening method, but confirms the principles</p><p>of their sel

51414,IS,,ISO 12405-1:2011,Electrically propelled road vehicles — Test specification for lithium-ion traction battery packs and systems — Part 1: High-power applications,Véhicules routiers à propulsion électrique — Spécifications d'essai pour packs et systèmes de batterie de traction aux ions lithium — Partie 1: Applications à haute puissance,2011-08-05,1,['43.120'],ISO/TC 22/SC 37,9599,,"[71407,68287]","['en','ru']",58,"<p>ISO 12405-1:2011 specifies test procedures for lithium-ion battery packs and systems for use in electrically propelled road vehicles.</p><p>The specified test procedures enable the determination of the essential characteristics of performance, reliability and abuse of lit

55854,IS,,ISO 12405-2:2012,Electrically propelled road vehicles — Test specification for lithium-ion traction battery packs and systems — Part 2: High-energy applications,Véhicules routiers à propulsion électrique — Spécifications d'essai pour des installations de batterie de traction aux ions lithium — Partie 2: Applications à haute énergie,2012-06-29,1,['43.120'],ISO/TC 22/SC 37,9599,,"[71407,68288]",['en'],60,

59224,IS,,ISO 12405-3:2014,Electrically propelled road vehicles — Test specification for lithium-ion traction battery packs and systems — Part 3: Safety performance requirements,Véhicules routiers à propulsion électrique — Spécifications d'essai pour packs et systèmes de batterie de traction aux ions lithium — Partie 3: Exigences de performance de sécurité,2014-05-19,1,['43.120'],ISO/TC 22/SC 37,9599,,"[68289,68665]",['en'],24,"<p>ISO 12405-3:2014 specifies test procedures and provides acceptable safety requirements for voltage class B lithium-ion battery packs and systems, to be used as traction batteries in electrically propelled road vehicles. Traction battery packs and systems used for t

5856,IS,,ISO 1241:1980,Essential oils — Determination of ester value after acetylation and evaluation of free alcohols and total alcohols content,Huiles essentielles — Détermination de l'indice d'ester après acétylation et évaluation de la teneur en alcools libres et en alcools totaux,1980-09-01,1,['71.100.60'],ISO/TC 54,9599,,[5857],"['en','fr']",3,

57697,IS,,ISO 12417-1:2015,Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products — Part 1: General requirements,Implants cardiovasculaires et circuits extra-corporels — Produits de combinaison médicament-dispositif vasculaire — Partie 1: Exigences générales,2015-09-27,1,['11.040.40'],ISO/TC 150/SC 2,9599,[51419],[82032],"['en','fr']",49,"<p>ISO 12417-1:2015 specifies requirements for vascular device-drug combination products (VDDCPs) based upon current technical and medical knowledge. VDDCPs are medical devices with various clinical indications for use in the human vascular blood system. A VDDCP incorporates, as an integral part, substance(s) which, i

5858,IS,,ISO 1242:1973,Essential oils — Determination of the acid value,Huiles essentielles — Détermination de l'indice d'acide,1973-12-01,1,['71.100.60'],ISO/TC 54,9599,,[25313],"['en','fr']",2,

25313,IS,,ISO 1242:1999,Essential oils — Determination of acid value,Huiles essentielles — Détermination de l'indice d'acide,1999-10-21,2,['71.100.60'],ISO/TC 54,9599,[5858],"[77272,82390]","['en','fr']",4,

50309,IS,,ISO 12439:2010,Mixing water for concrete,Eau de gâchage pour béton,2010-01-19,1,['91.100.30'],ISO/TC 71/SC 3,9599,,[83066],['en'],14,<p>ISO 12439_2010 specifies the requirements for water that is suitable for making concrete in accordance with ISO 22965 (all parts) and describes methods for assessing its suitability.</p>

64064,IS,,ISO 12460-2:2018,Wood-based panels — Determination of formaldehyde release — Part 2: Small-scale chamber method,Panneaux à base de bois — Détermination du dégagement de formaldéhyde — Partie 2: Méthode à la petite chambre,2018-09-05,1,['79.060.01'],ISO/TC 89,9599,,[84728],['en'],15,"<p>This document specifies a test method to measure the formaldehyde concentrations in air from wood products under defined test conditions of temperature and relative humidity. Results obtained from this small-scale chamber test method are often used for quality assurance and can be comparable to, or can provide useful correlations to, results obtained from testing larger product samples in larger cham

42255,IS,,ISO 12460-3:2008,Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method,Panneaux à base de bois — Détermination du dégagement de formaldéhyde — Partie 3: Méthode d'analyse des gaz,2008-04-07,1,['79.060.01'],ISO/TC 89,9599,,[63065],['en'],9,<p>ISO 12460-3:2008 specifies a procedure for determination of accelerated formaldehyde release from wood-based panels using the gas analysis method.</p>

63065,IS,,ISO 12460-3:2015,Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method,Panneaux à base de bois — Détermination du dégagement de formaldéhyde — Partie 3: Méthode d'analyse de gaz,2015-10-26,2,['79.060.01'],ISO/TC 89,9599,[42255],[75055],"['en','fr']",11,"<p>ISO 12460-3:2015 specifies a procedure for determination of accelerated formaldehyde release from uncoated and coated wood-based panels using the gas analysis method. The procedure is also suitable for the testing of other materials (e.g. edge bands, floor coverings, foams, foils, laminated wood products, veneered wood products, coated wood products).</p>"

75055,IS,,ISO 12460-3:2020,Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method,Panneaux à base de bois — Détermination du dégagement de formaldéhyde — Partie 3: Méthode d'analyse de gaz,2020-10-06,3,['79.060.01'],ISO/TC 89,9599,[63065],[86656],"['en','fr']",13,"<p>This document specifies a procedure for determination of accelerated formaldehyde release from uncoated and coated wood-based panels using the gas analysis method. The procedure is also suitable for the testing of other materials (e.g. edge bands, floor coverings, foams, foils, laminated wood products, veneered wood products, coated wood products).</p>"

42256,IS,,ISO 12460-4:2008,Wood-based panels — Determination of formaldehyde release — Part 4: Desiccator method,Panneaux à base de bois — Détermination du dégagement de formaldéhyde — Partie 4: Méthode au dessiccateur,2008-04-07,1,['79.060.01'],ISO/TC 89,9599,,[64998],"['en','fr']",8,"<p>ISO 12460-4:2008 specifies a desiccator method for the determination of the quantity of formaldehyde emitted from particleboard, fibreboard, plywood, oriented strand board (OSB), and wooden laminated flooring.</p>"

57878,IS,Amd,ISO 12460-4:2008/Amd 1:2011,Wood-based panels — Determination of formaldehyde release — Part 4: Desiccator method — Amendment 1,Panneaux à base de bois — Détermination du dégagement de formaldéhyde — Partie 4: Méthode au dessiccateur — Amendement 1,2011-05-05,1,['79.060.01'],ISO/TC 89,9599,,[64998],"['en','fr']",1,

51349,IS,,ISO 12460-5:2011,Wood-based panels — Determination of formaldehyde release — Part 5: Extraction method (called the perforator method),Panneaux à base de bois — Détermination du dégagement de formaldéhyde — Partie 5: Méthode d'extraction (dite méthode au perforateur),2011-06-08,1,['79.060.01'],ISO/TC 89,9599,,[63066],['en'],12,"<p>ISO 12460-5:2011 specifies an extraction method, known as the 'perforator method', for the determination of the formaldehyde content of unlaminated and uncoated wood-based panels.</p>"

2486,IS,,ISO 12466-1:1999,Plywood — Bonding quality — Part 1: Test methods,Contreplaqué — Qualité du collage — Partie 1: Méthodes d'essai,1999-10-21,1,['79.060.10'],ISO/TC 89/SC 3,9599,,[40123],"['en','fr']",9,

23241,IS,,ISO 12466-2:1999,Plywood — Bonding quality — Part 2: Requirements,Contreplaqué — Qualité du collage — Partie 2: Exigences,1999-10-14,1,['79.060.10'],ISO/TC 89/SC 3,9599,,[40124],"['en','fr']",4,

35093,IS,,ISO 12468-1:2003,External exposure of roofs to fire — Part 1: Test method,Exposition des toitures à un feu extérieur — Partie 1: Méthode d'essais,2003-03-19,1,"['91.060.20','13.220.50']",ISO/TC 92/SC 2,9599,,[59885],['en'],23,"<p>ISO 12468-1:2003 specifies a test method to determine the resistance of roofs to external fire exposure. This method evaluates the behaviour of the roof when exposed to two types of burning brands combined with wind and with or without heat radiation, concerning the fire spread across the external surface of the roof, the fire spread within the roof, the fire penetration and the production of flaming droplets or debris falling through the roof, from the un

35094,IS,,ISO 12468-2:2005,External fire exposure to roofs — Part 2: Classification of roofs,Exposition des toitures à un feu extérieur — Partie 2: Classification des toitures,2005-08-15,1,"['91.060.20','13.220.50']",ISO/TC 92/SC 2,9599,,[61317],['en'],4,<p>ISO 12468-2:2005 establishes the classification of roofs tested in accordance with ISO 12468-1. Performance criteria are established with respect to the following:</p><ul><li> fire penetration or openings;</li><li> external fire spread;</li><li> falling of flaming droplets or debris.</li></ul>

5859,IS,,ISO 1247:1974,Aluminium pigments for paints,Pigments d'aluminium pour peintures,1974-09-01,1,['87.060.10'],ISO/TC 256,9599,,"[75151,77127]","['en','fr']",12,"<p>Specifies the requirements and corresponding test methods for pigments composed of finely divided aluminium metal. The specification covers four types of aluminium pigments. Two Types of pigments are further classified by their water-covering capacity. The pigments are suitable for use in general purpose, decorative and protective paints and speciality finishing paints. ISO 1247 replaces ISO Recommendation R 1247-1971.</p>"

5860,IS,Amd,ISO 1247:1974/Amd 1:1982,Aluminium pigments for paints — Amendment 1,Pigments d'aluminium pour peintures — Amendement 1,1982-11-01,1,['87.060.10'],ISO/TC 256,9599,,"[75151,77127]","['en','fr']",1,<p>Relates to the deletion of a reference (ISO/TR 798) and substitution by the reference ISO 1784. Cancels and replaces also references in the table. Amends the last two sentences in subclause 15.3.3.</p>

39861,IS,,ISO 12473:2006,General principles of cathodic protection in sea water,Principes généraux de la protection cathodique en eau de mer,2006-03-29,1,['77.060'],ISO/TC 156,9599,,[67729],"['en','fr']",28,"<p>ISO 12473:2006 covers the general principles of cathodic protection including the criteria for protection, environmental and design considerations and secondary effects of cathodic protection, and is intended as an introduction to other European Standards in the general series 'Cathodic Protection of Steel Structures in Sea Water'.</p>"

5861,IS,,ISO 1248:1974,Iron oxide pigments for paints,Pigments à base d'oxydes de fer pour peintures,1974-07-01,1,['87.060.10'],ISO/TC 256,9599,,"[38752,5862]","['en','fr']",6,"<p>Specifies the requirements and corresponding test methods for all manufactured and natural pigments, including micaceous and rapid dispersion pigments. The material shall be in dry form. The pigments are classified by groups according to their colour, by categories according to their iron content, by types according to their content of water-soluble matter and their total content of water-soluble chlorides and sulphates, by grades according their residue on sieve an by classes according to their origin. Replaces IS

2534,IS,,ISO 12480-1:1997,Cranes — Safe use — Part 1: General,Appareils de levage à charge suspendue — Sécurité d'emploi — Partie 1: Généralités,1997-03-06,1,['53.020.20'],ISO/TC 96/SC 5,9599,,"[83568,83637,75264]","['en','fr']",33,

34029,IS,,ISO 12480-3:2005,Cranes — Safe use — Part 3: Tower cranes,Appareils de levage à charge suspendue — Sécurité d'emploi — Partie 3: Grues à tour,2005-04-13,1,['53.020.20'],ISO/TC 96/SC 7,9599,,[70316],"['en','fr']",28,"<p>ISO 12480-3:2005 establishes required practices for the safe use of tower cranes. It is intended to be used in conjunction with ISO 12480-1. Subjects covered include safe systems of work, management, planning, selection, erection and dismantling, special base, operation and maintenance of cranes and the selection of drivers, slingers and signallers. It does not cover manually (non-powered) operated cranes, or cranes in which at least one of its motions is manually op

70316,IS,,ISO 12480-3:2016,Cranes — Safe use — Part 3: Tower cranes,Appareils de levage à charge suspendue — Sécurité d'emploi — Partie 3: Grues à tour,2016-08-10,2,['53.020.20'],ISO/TC 96/SC 7,9599,[34029],[72671],"['en','fr']",28,"<p>ISO 12480-3:2016 establishes required practices for the safe use of tower cranes. It is intended to be used in conjunction with ISO 12480-1.</p><p>Subjects covered include safe systems of work, management, planning, selection, erection and dismantling, special base, operation and maintenance of cranes and the selection of operators, slingers and signallers.</p><p>It does not cover manually (non-powered) operated cranes, or cranes in which at least one of its m

2550,IS,,ISO 12482-1:1995,Cranes — Condition monitoring — Part 1: General,Appareils de levage à charge suspendue — Surveillance — Partie 1: Généralités,1995-11-16,1,['53.020.20'],ISO/TC 96/SC 5,9599,,[57481],['en'],7,"<p>Purpose of this part is to ensure that the design constraints of the intended use of a crane are clearly identified and to define actions to be taken when the crane has been used over a period of time and has approached these constraints, to ensure a new safe working period. A description is given of the special assessment required to monitor the condition of a crane.</p>"

2664,IS,,ISO 12485:1998,Tower cranes — Stability requirements,Grues à tour — Exigences relatives à la stabilité,1998-10-29,1,['53.020.20'],ISO/TC 96/SC 7,9599,,"[66765,62531]","['en','fr']",4,

34547,IS,,ISO 12488-1:2005,Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General,Appareils de levage à charge suspendue — Tolérances des roues et des voies de roulement et de déplacement — Partie 1: Généralités,2005-04-25,1,['53.020.20'],ISO/TC 96/SC 8,9599,[15426],[57300],"['en','fr']",21,<p>ISO 12488-1:2005 specifies tolerances for construction assemblies and operational conditions of cranes and associated crane tracks as defined in ISO 4306-1. The purpose of its requirements is to promote safe operation and achievement of the expected life of components by the elimination of excessive load effects due to deviations or misalignments from the normal dimensions of

52476,IS,Cor,ISO 12488-1:2005/Cor 1:2008,Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General — Technical Corrigendum 1,Appareils de levage à charge suspendue — Tolérances des roues et des voies de roulement et de déplacement — Partie 1: Généralités — Rectificatif technique 1,2008-11-12,1,['53.020.20'],ISO/TC 96/SC 8,9599,,[57300],"['en','fr']",2,

51473,IS,,ISO 12492:2012,"Rubber, raw — Determination of water content by Karl Fischer method",Caoutchouc brut — Détermination de la teneur en eau par la méthode de Karl Fischer,2012-10-01,1,['83.040.10'],ISO/TC 45/SC 3,9599,,[85587],['en'],7,"<p>ISO 12492:2012 specifies a test method for the determination of water content of raw rubber and compounded rubber using a coulometric Karl Fischer titration method. It applies to the range for the water content between 0,01 % and 1 %. As this is a very sensitive method, contact of sample with any moisture, even from the surrounding environment, must be eliminated as much as possible.</p>"

51474,IS,,ISO 12493:2011,"Rubber, vulcanized — Determination of stress in tension upon heating",Caoutchouc vulcanisé — Détermination de la contrainte en traction lors du chauffage,2011-07-14,1,['83.060'],ISO/TC 45/SC 2,9599,,[72785],"['en','ru']",11,<p>ISO 12493:2011 specifies a method for measuring the stress in tension which is developed in vulcanized rubber when it is heated (thermal stress). The thermal stress is measured for various pre-strain and temperature conditions as a function of time.</p>

72785,IS,,ISO 12493:2017,"Rubber, vulcanized — Determination of stress in tension upon heating",Caoutchouc vulcanisé — Détermination de la contrainte en traction lors du chauffage,2017-07-31,2,['83.060'],ISO/TC 45/SC 2,9599,[51474],[80467],['en'],11,<p>ISO 12493:2017 specifies a method for measuring the stress in tension which is developed in vulcanized rubber when it is heated (thermal stress). The thermal stress is measured for various pre-strain and temperature conditions as a function of time.</p>

32823,IS,,ISO 12494:2001,Atmospheric icing of structures,Charges sur les structures dues à la glace,2001-08-30,1,['91.080.01'],ISO/TC 98/SC 3,9599,,[72443],['en'],56,

3930,IS,,ISO 125:1983,"Rubber latex, natural — Determination of alkalinity",Latex de caoutchouc — Détermination de l'alcalinité,1983-12-01,3,['83.040.10'],ISO/TC 45/SC 3,9599,,[3931],"['en','fr']",2,

3931,IS,,ISO 125:1990,Natural rubber latex concentrate — Determination of alkalinity,Latex concentré de caoutchouc naturel — Détermination de l'alcalinité,1990-01-18,4,['83.040.10'],ISO/TC 45/SC 3,9599,[3930],[27006],"['en','fr']",2,<p>Covers the method for materials which contain preservative agents and have been submitted to some type of concentration process. Replaces the second edition (ISO 125-1977).</p>

27006,IS,,ISO 125:2003,Natural rubber latex concentrate — Determination of alkalinity,Concentré de latex de caoutchouc naturel — Détermination de l'alcalinité,2003-07-29,5,['83.040.10'],ISO/TC 45/SC 3,9599,[3931],[59265],"['en','fr']",4,"<p>ISO 125:2003 specifies a method for the determination of the alkalinity of natural rubber latex concentrate.</p><p>The method is not necessarily suitable for latices from natural sources other than <i>Hevea</i> <i>brasiliensis</i> or for synthetic rubber latices, compounded latex, vulcanized latex or artificial dispersions of rubber.</p>"

59265,IS,,ISO 125:2011,Natural rubber latex concentrate — Determination of alkalinity,Latex concentré de caoutchouc naturel — Détermination de l'alcalinité,2011-11-10,6,['83.040.10'],ISO/TC 45/SC 3,9599,"[27006,54277]",[72849],"['en','fr']",5,"<p>ISO 125:2011 specifies a method for the determination of the alkalinity of natural rubber latex concentrate.</p><p>The method is not necessarily suitable for latices from natural sources other than <i>Hevea</i> <i>brasiliensis</i> or for synthetic rubber latices, compounded latex, vulcanized latex or artificial dispersions of rubber.</p>"

1845,IS,,ISO 12509:1995,"Earth-moving machinery — Lighting, signalling and marking lights, and reflex-reflector devices","Engins de terrassement — Feux d'éclairage, de signalisation, de position et d'encombrement, et catadioptres",1995-05-18,1,['53.100'],ISO/TC 127/SC 2,9599,,"[32901,40330]","['en','fr']",58,"<p>Specifies the minimum requirements for installation and performance of lighting, signalling and marking lights, and reflex-reflector devices on earth-moving machines. Applies to self-propelled wheel or crawler earth-moving machines as defined in ISO 6165, intended for off-road use as well as on-road use. Does not include pedestrian controlled machines.</p>"

40330,IS,,ISO 12509:2004,"Earth-moving machinery — Lighting, signalling and marking lights, and reflex-reflector devices","Engins de terrassement — Feux d'éclairage, de signalisation, de position et d'encombrement, et catadioptres",2004-12-08,2,['53.100'],ISO/TC 127/SC 3,9599,"[37466,1845]","[66905,77689,59773]","['en','fr']",64,"<p>ISO 12509:2004 specifies the minimum requirements for installation and performance of lighting, signalling and marking lights, and reflex-reflector devices on earth moving machines. It is applicable to self-propelled wheel or crawler earth-moving machines as defined in ISO 6165, intended for off-road, as well as on-road, use. It is not applicable to pedestrian-co

1705,IS,,ISO 12543-1:1998,Glass in building — Laminated glass and laminated safety glass — Part 1: Definitions and description of component parts,Verre dans la construction — Verre feuilleté et verre feuilleté de sécurité — Partie 1: Définitions et description des composants,1998-06-10,1,"['81.040.20','01.040.81']",ISO/TC 160,9599,,"[46375,38329]","['en','fr']",4,

46375,IS,,ISO 12543-1:2011,Glass in building — Laminated glass and laminated safety glass — Part 1: Definitions and description of component parts,Verre dans la construction — Verre feuilleté et verre feuilleté de sécurité — Partie 1: Définitions et description des composants,2011-08-09,2,"['81.040.20','01.040.81']",ISO/TC 160,9599,[1705],[72871],"['en','fr']",7,<p>ISO 12543-1:2011 defines terms and describes component parts for laminated glass and laminated safety glass for use in building.</p>

38329,IS,,ISO 12543-2:2004,Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass,Verre dans la construction — Verre feuilleté et verre feuilleté de sécurité — Partie 2: Verre feuilleté de sécurité,2004-11-12,1,['81.040.20'],ISO/TC 160,9599,[1705],[46376],"['en','fr']",4,<p>ISO 12543-2:2004 specifies performance requirements for laminated safety glass. </p>

46376,IS,,ISO 12543-2:2011,Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass,Verre dans la construction — Verre feuilleté et verre feuilleté de sécurité — Partie 2: Verre feuilleté de sécurité,2011-08-09,2,['81.040.20'],ISO/TC 160,9599,[38329],[75497],"['en','fr']",6,<p>ISO 12543-2:2011 specifies performance requirements for laminated safety glass as defined in ISO 12543-1.</p>

25257,IS,,ISO 12543-3:1998,Glass in building — Laminated glass and laminated safety glass — Part 3: Laminated glass,Verre dans la construction — Verre feuilleté et verre feuilleté de sécurité — Partie 3: Verre feuilleté,1998-06-18,1,['81.040.20'],ISO/TC 160,9599,,[46377],"['en','fr']",3,

46377,IS,,ISO 12543-3:2011,Glass in building — Laminated glass and laminated safety glass — Part 3: Laminated glass,Verre dans la construction — Verre feuilleté et verre feuilleté de sécurité — Partie 3: Verre feuilleté,2011-08-09,2,['81.040.20'],ISO/TC 160,9599,[25257],[75498],"['en','fr']",5,<p>ISO 12543-3:2011 specifies performance requirements for laminated glass as defined in ISO 12543-1.</p>

25258,IS,,ISO 12543-4:1998,Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods for durability,Verre dans la construction — Verre feuilleté et verre feuilleté de sécurité — Partie 4: Méthodes d'essai concernant la durabilité,1998-06-18,1,['81.040.20'],ISO/TC 160,9599,,[46378],"['en','fr']",9,

46378,IS,,ISO 12543-4:2011,Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods for durability,Verre dans la construction — Verre feuilleté et verre feuilleté de sécurité — Partie 4: Méthodes d'essai concernant la durabilité,2011-08-09,2,['81.040.20'],ISO/TC 160,9599,[25258],[75499],"['en','fr']",11,"<p>ISO 12543-4:2011 specifies test methods in respect of resistance to high temperature, humidity and radiation for laminated glass and laminated safety glass for use in building.</p>"

25259,IS,,ISO 12543-5:1998,Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing,Verre dans la construction — Verre feuilleté et verre feuilleté de sécurité — Partie 5: Dimensions et façonnage des bords,1998-06-18,1,['81.040.20'],ISO/TC 160,9599,,[46379],"['en','fr']",11,

46379,IS,,ISO 12543-5:2011,Glass in building — Laminated glass and laminated safety glass — Part 5: Dimensions and edge finishing,Verre dans la construction — Verre feuilleté et verre feuilleté de sécurité — Partie 5: Dimensions et façonnage des bords,2011-08-09,2,['81.040.20'],ISO/TC 160,9599,[25259],[75500],"['en','fr']",9,"<p>ISO 12543-5:2011 specifies dimensions, limit deviations and edge finishes of laminated glass and laminated safety glass for use in building. </p>"

25265,IS,,ISO 12543-6:1998,Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance,Verre dans la construction — Verre feuilleté et verre feuilleté de sécurité — Partie 6: Aspect,1998-06-18,1,['81.040.20'],ISO/TC 160,9599,,[46380],"['en','fr']",4,

46380,IS,,ISO 12543-6:2011,Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance,Verre dans la construction — Verre feuilleté et verre feuilleté de sécurité — Partie 6: Aspect,2011-08-09,2,['81.040.20'],ISO/TC 160,9599,[25265],[75501],"['en','fr']",5,<p>ISO 12543-6:2011 specifies defects of finished sizes and test methods with regard to the appearance of laminated glass when looking through the glass.</p><p>ISO 12543-6:2011 is applicable to finished sizes at the time of supply.</p>

61531,IS,Cor,ISO 12543-6:2011/Cor 1:2012,Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance — Technical Corrigendum 1,Verre dans la construction — Verre feuilleté et verre feuilleté de sécurité — Partie 6: Aspect — Rectificatif technique 1,2012-05-15,2,['81.040.20'],ISO/TC 160,9599,,[75501],"['en','fr']",2,

2533,IS,,ISO 12567-1:2000,Thermal performance of windows and doors — Determination of thermal transmittance by hot box method — Part 1: Complete windows and doors,Isolation thermique des fenêtres et portes — Détermination de la transmission thermique par la méthode à la boîte chaude — Partie 1: Fenêtres et portes complètes,2000-09-07,1,"['91.120.10','91.060.50']",ISO/TC 163/SC 1,9599,,[50327],"['en','fr']",41,

33382,IS,,ISO 12569:2000,Thermal performance of buildings — Determination of air change in buildings — Tracer gas dilution method,Performances thermiques des bâtiments — Détermination du renouvellement d'air dans les bâtiments — Méthode de dilution de gaz traceurs,2000-10-26,1,['91.120.10'],ISO/TC 163/SC 1,9599,,[56470],"['en','fr']",22,

56470,IS,,ISO 12569:2012,Thermal performance of buildings and materials — Determination of specific airflow rate in buildings — Tracer gas dilution method,Performance thermique des bâtiments et des matériaux — Détermination du débit d'air spécifique dans les bâtiments — Méthode de dilution de gaz traceurs,2012-11-27,2,['91.120.10'],ISO/TC 163/SC 1,9599,[33382],[69817],"['en','fr']",54,"<p>ISO 12569:2012 establishes an engineering standard by which to obtain the ventilation rate/specific airflow rate, using a tracer gas in a building space, which is considered to be of a single zone.</p><p>The measurement method is valid in spaces where the combined conditions concerning the uniformity of tra

2408,IS,,ISO 12571:2000,Hygrothermal performance of building materials and products — Determination of hygroscopic sorption properties,Performance hygrothermique des matériaux et produits pour le bâtiment — Détermination des propriétés de sorption hygroscopique,2000-03-09,1,['91.100.01'],ISO/TC 163/SC 1,9599,,[61388],"['en','fr']",15,

61388,IS,,ISO 12571:2013,Hygrothermal performance of building materials and products — Determination of hygroscopic sorption properties,Performance hygrothermique des matériaux et produits pour le bâtiment — Détermination des propriétés de sorption hygroscopique,2013-07-25,2,['91.100.01'],ISO/TC 163/SC 1,9599,[2408],[79595],"['en','fr']",18,<p>ISO 12571:2013 specifies two alternative methods for determining hygroscopic sorption properties of porous building materials and products:</p><p>a) using desiccators and weighing cups (desiccator method);</p><p>b) using a climatic chamber (climatic chamber method).</p><p>The desiccator method is the reference method.</p><p>ISO 12571:2013 does not spec

34000,IS,,ISO 12572:2001,Hygrothermal performance of building materials and products — Determination of water vapour transmission properties,Performance hygrothermique des matériaux et produits pour le bâtiment — Détermination des propriétés de transmission de la vapeur d'eau,2001-06-28,1,['91.120.10'],ISO/TC 163/SC 1,9599,,"[46448,64988]","['en','fr']",27,

40959,IS,,ISO 12578:2008,Timber structures — Glued laminated timber — Component performance and production requirements,Structures en bois — Bois lamellé-collé — Performance des composants et exigences de production,2008-08-26,1,['91.080.20'],ISO/TC 165,9599,,[61598],['en'],13,"<p>ISO 12578:2008 specifies requirements for the components of glued laminated timber members and minimum requirements for the production of such members for structural use.</p><p>ISO 12578:2008 is applicable to products with a finished lamination thickness of not more than 50 mm.</p><p>Although most glued laminated timber is made from coniferous species, ISO 12578:2008 also applies to broad-leaf species if the tests

3932,IS,,ISO 126:1982,"Rubber latex, natural — Determination of dry rubber content",Latex de caoutchouc — Détermination de la teneur en caoutchouc sec,1982-05-01,2,['83.040.10'],ISO/TC 45,9599,,[3933],['en'],2,

3933,IS,,ISO 126:1989,Natural rubber latex concentrate — Determination of dry rubber content,Latex de caoutchouc naturel concentré — Détermination de la teneur en caoutchouc sec,1989-07-13,3,['83.040.10'],ISO/TC 45/SC 3,9599,[3932],[25530],"['en','fr']",2,

20885,IS,Cor,ISO 126:1989/Cor 1:1992,Natural rubber latex concentrate — Determination of dry rubber content — Technical Corrigendum 1,Latex de caoutchouc naturel concentré — Détermination de la teneur en caoutchouc sec — Rectificatif technique 1,1992-05-14,3,['83.040.10'],ISO/TC 45/SC 3,9599,,[25530],"['en','fr']",1,

25530,IS,,ISO 126:1995,"Latex, rubber, natural concentrate — Determination of dry rubber content",Latex de caoutchouc naturel concentré — Détermination de la teneur en caoutchouc sec,1995-12-07,4,['83.040.10'],ISO/TC 45/SC 3,9599,"[3933,20885]",[35176],"['en','fr']",3,<p>Gives a method for the determination of the dry rubber content of natural rubber latex concentrate. Replaces the third edition which has been insignificantly revised.</p>

51550,IS,,ISO 12609-1:2013,Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications — Part 1: Specification for products,Équipements ophtalmiques de protection contre les sources lumineuses intenses utilisées sur les animaux et les humains pour des applications médicales et cosmétiques — Partie 1: Spécifications des produits,2013-07-23,1,['13.340.20'],ISO/TC 94/SC 6,9599,,[72629],['en'],30,"<p>ISO 12609-1:2013 specifies performance and labelling of eye protectors used for ILS equipment used on humans and animals for cosmetic and medical applications against excessive exposure to optical radiation in the spectral range 250 nm to 3 0

2483,IS,,ISO 12611:1997,Cinematography — Audio head tones for use in international exchange of 35 mm magnetic film masters — Specifications and location,Cinématographie — 'Audio head tones' pour utilisation dans les échanges internationaux de 'masters' de film magnétique de 35 mm — Spécifications et emplacement,1997-07-24,1,['37.060.20'],ISO/TC 36,9599,,[39985],"['en','fr']",3,

2499,IS,,ISO 12612:1997,Cinematography — Interchange of post-production materials,Cinématographie — Échange de matériaux post-production,1997-06-12,1,['37.060.20'],ISO/TC 36,9599,,"[69741,39967,43649]",['en'],9,

57661,IS,,ISO 12614-1:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 1: General requirements and definitions,Véhicules routiers — Équipements pour véhicules utilisant le gaz naturel liquéfié (GNL) comme combustible — Partie 1: Exigences générales et définitions,2014-07-01,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[77657],['en'],7,"<p>ISO 12614-1:2014 specifies general requirements and definitions of liquefied natural gas fuel system components, intended for use on the types of motor vehicles as defined in ISO 3833. It also provides general design principles and specifies requirements for instructions and marking.</p><p>ISO 12614-1:2014 is not applicable to the fol

57675,IS,,ISO 12614-10:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 10: Rigid fuel line in stainless steel,Véhicules routiers — Équipements pour véhicules utilisant le gaz naturel liquéfié (GNL) comme combustible — Partie 10: Tuyauterie rigide pour combustible en acier inoxydable,2014-07-01,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[77666],['en'],4,"<p>ISO 12614-10:2014 specifies tests and requirements for the rigid fuel line, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833. </p><p>ISO 12614-10:2014 is not applicable to the following:</p><p>a) fuel containers;</p><p>b) stationary gas engines

57678,IS,,ISO 12614-11:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 11: Fittings,Véhicules routiers — Équipements pour véhicules utilisant le gaz naturel liquéfié (GNL) comme combustible — Partie 11: Raccords,2014-07-01,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[77667],['en'],4,"<p>ISO 12614-11:2014 specifies tests and requirements for the fittings, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833.</p><p>ISO 12614-11:2014 is not applicable to the following:</p><p>a) fuel containers;</p><p>b) stationary gas engines;</p><p>c) container mounting hardware;</p><p>d) electronic fuel managemen

57679,IS,,ISO 12614-12:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 12: Rigid fuel line in copper and its alloys,Véhicules routiers — Équipements pour véhicules utilisant le gaz naturel liquéfié (GNL) comme combustible — Partie 12: Circuit de combustible rigide en cuivre et ses alliages,2014-07-03,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[77668],['en'],4,"<p>ISO 12614-12:2014 specifies tests and requirements for the rigid fuel line in copper, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833. </p><p>ISO 12614-12:2014 is not applicable to the following:</p><p>a) fuel containers;</p><p>b) stati

57680,IS,,ISO 12614-13:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 13: Tank pressure control regulator,Véhicules routiers — Équipements pour véhicules utilisant le gaz naturel liquéfié (GNL) comme combustible — Partie 13: Régulateur de pression du réservoir,2014-07-03,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[77669],['en'],4,"<p>ISO 12614-13 specifies tests and requirements for the pressure control regulator, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833.</p><p>ISO 12614-13 is not applicable to the following:</p><p>a) fuel containers;</p><p>b) stationary gas engines;</p><p>c) containe

57681,IS,,ISO 12614-14:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 14: Differential pressure fuel content gauge,Véhicules routiers — Équipements pour véhicules utilisant le gaz naturel liquéfié (GNL) comme combustible — Partie 14: Jauge de carburant à manomètre différentiel,2014-07-01,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[77670],['en'],4,"<p>ISO 12614-14:2014 specifies tests and requirements for the differential pressure fuel content gauge, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833. </p><p>ISO 12614-14:2014 is not applicable to the following:</p><p>a) fuel containers;</p><p>b) st

57682,IS,,ISO 12614-15:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 15: Capacitance fuel content gauge,Véhicules routiers — Équipements pour véhicules utilisant le gaz naturel liquéfié (GNL) comme combustible — Partie 15: Jauge de capacité,2014-07-03,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[77671],['en'],3,"<p>ISO 12614-15:2014 specifies tests and requirements for the capacitance fuel content gauge, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833.</p><p>ISO 12614-15:2014 is applicable to vehicles using natural gas in accordance with ISO 15403 (mono-fuel, bi-fuel, or dual-fuel applications). It i

57683,IS,,ISO 12614-16:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 16: Heat exchanger - vaporizer,Véhicules routiers — Équipements pour véhicules utilisant le gaz naturel liquéfié (GNL) comme combustible — Partie 16: Échangeur de chaleur - vaporisateur,2014-07-01,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[77672],['en'],5,"<p>12614-16:2014 specifies tests and requirements for the heat exchanger - vaporizer, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833. </p><p>ISO 12614-16:2014 is not applicable to the following:</p><p>a) fuel containers;</p><p>b) stationary gas engines;</p><p>c) contai

57684,IS,,ISO 12614-17:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 17: Natural gas detector,Véhicules routiers — Équipements pour véhicules utilisant le gaz naturel liquéfié (GNL) comme combustible — Partie 17: Détecteur de gaz naturel,2014-07-03,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[77673],['en'],3,"<p>ISO 12614-17:2014 specifies tests and requirements for the natural gas detector, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833. </p><p>ISO 12614-17:2014 is not applicable to the following:</p><p>a) fuel containers;</p><p>b) stationary gas engines;</p><p>c) container mounting hardwa

57685,IS,,ISO 12614-18:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 18: Gas temperature sensor,Véhicules routiers — Équipements pour véhicules utilisant le gaz naturel liquéfié (GNL) comme combustible — Partie 18: Capteur de température de gaz,2014-07-03,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[77674],['en'],4,"<p>ISO 12614-18:2014 specifies tests and requirements for the gas temperature sensor, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833. This part of ISO 12614 is not applicable to the following:</p><p>a) fuel containers;</p><p>b) stationary gas engines;</p><p>c) container mounting