Withdrawn and superseded ISO standards — page 29 of 246

21214,IS,,ISO 12209-3:2000,Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air — Part 3: Adaptor for 230 bar valves,Bouteilles à gaz — Raccords de sortie pour robinets de bouteilles à gaz pour air comprimé respirable — Partie 3: Adaptateur pour robinets 230 bar,2000-11-23,1,['23.020.35'],ISO/TC 58/SC 2,9599,,[55932],"['en','fr']",6,

2636,IS,,ISO 12210-1:1998,Cranes — Anchoring devices for in-service and out-of-service conditions — Part 1: General,Appareils de levage à charge suspendue — Dispositifs d'ancrage dans des conditions en service et hors service — Partie 1: Généralités,1998-07-09,1,['53.020.20'],ISO/TC 96/SC 9,9599,,[76757],"['en','fr']",1,<p>This part of ISO 12210 establishes the general criteria for the provision of anchoring devices for cranes and crane parts for in-service and out-of-service conditions.</p><p>Other parts of ISO 11210 present the requirements for specific crane types.</p>

2640,IS,,ISO 12210-4:1998,Cranes — Anchoring devices for in-service and out-of-service conditions — Part 4: Jib cranes,Appareils de levage à charge suspendue — Dispositifs d'ancrage en dehors des conditions de service — Partie 4: Grues à flèche,1998-06-11,1,['53.020.20'],ISO/TC 96/SC 9,9599,,[76757],"['en','fr']",3,"<p>This part of ISO 12210 provides specific requirements for anchoring devices for in-service and out-of-service conditions for jib cranes as defined in ISO 4306-1, other than tower cranes, mobile cranes and railway cranes that are otherwise generally covered by other parts of ISO 12210.</p>"

34046,IS,Cor,ISO 12210-4:1998/Cor 1:2000,Cranes — Anchoring devices for in-service and out-of-service conditions — Part 4: Jib cranes — Technical Corrigendum 1,Appareils de levage à charge suspendue — Dispositifs d'ancrage en dehors des conditions de service — Partie 4: Grues à flèche — Rectificatif technique 1,2000-04-20,1,['53.020.20'],ISO/TC 96/SC 9,9599,,[76757],"['en','fr']",2,

1236,IS,,ISO 12213-1:1997,Natural gas — Calculation of compression factor — Part 1: Introduction and guidelines,Gaz naturel — Calcul du facteur de compression — Partie 1: Introduction et lignes directrices,1997-11-27,1,['75.060'],ISO/TC 193/SC 1,9599,,[42899],"['en','fr']",12,

24465,IS,,ISO 12213-2:1997,Natural gas — Calculation of compression factor — Part 2: Calculation using molar-composition analysis,Gaz naturel — Calcul du facteur de compression — Partie 2: Calcul à partir de l'analyse de la composition molaire,1997-11-27,1,['75.060'],ISO/TC 193/SC 1,9599,,[44411],"['en','fr']",28,

24466,IS,,ISO 12213-3:1997,Natural gas — Calculation of compression factor — Part 3: Calculation using physical properties,Gaz naturel — Calcul du facteur de compression — Partie 3: Calcul à partir des caractéristiques physiques,1997-11-27,1,['75.060'],ISO/TC 193/SC 1,9599,,[44412],"['en','fr']",30,

20309,IS,,ISO 12214:2002,Road vehicles — Direction-of-motion stereotypes for automotive hand controls,Véhicules routiers — Stéréotypes de sens d'action sur les commandes manuelles dans l'automobile,2002-03-14,1,['43.020'],ISO/TC 22,9599,,[55066],['en'],9,"<p>This International Standard gives design recommendations and requirements for the direction-of-motion of hand controls found in passenger, multipurpose and commercial vehicles, and buses. </p>"

55066,IS,,ISO 12214:2010,Road vehicles — Direction-of-motion stereotypes for automotive hand controls,Véhicules routiers — Stéréotypes de sens d'action sur les commandes manuelles dans l'automobile,2010-02-26,2,['43.020'],ISO/TC 22/SC 39,9599,[20309],[73932],['en'],10,"<p>ISO 12214:2010 gives design recommendations and requirements for the direction-of-motion of hand controls found in passenger, multipurpose and commercial vehicles, and buses.</p>"

40210,IS,,ISO 12215-5:2008,"Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls, design stresses, scantlings determination","Petits navires — Construction de coques et échantillonnage — Partie 5: Pressions de conception pour monocoques, contraintes de conception, détermination de l'échantillonnage",2008-04-11,1,['47.080'],ISO/TC 188,9599,,[69552],"['en','fr']",108,"<p>ISO 12215-5:2008 applies to the determination of design pressures and stresses, and to the determination of the scantlings, including internal structural members of monohull small craft constructed from fibre reinforced plastics, aluminium or steel alloys, glued wood or other suitable boat bu

61193,IS,Amd,ISO 12215-5:2008/Amd 1:2014,"Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls, design stresses, scantlings determination — Amendment 1","Petits navires — Construction de coques et échantillonnage — Partie 5: Pressions de conception pour monocoques, contraintes de conception, détermination de l'échantillonnage — Amendement 1",2014-07-09,1,['47.080'],ISO/TC 188,9599,,[69552],"['en','fr']",1,

33661,IS,,ISO 12216:2002,"Small craft — Windows, portlights, hatches, deadlights and doors — Strength and watertightness requirements","Petits navires — Fenêtres, hublots, panneaux, tapes et portes — Exigences de résistance et d'étanchéité",2002-06-13,1,['47.080'],ISO/TC 188,9599,,[69553],"['en','fr']",62,"<p>This International Standard specifies technical requirements for windows, portlights, hatches, deadlights and doors on small craft of hull length up to 24 m, taking into account the type of craft, its design category, and the location of the appliance. </p><p>The appliances considered in this International Standard are only those that are critical for the craft's watertightness, i.e. th

33073,IS,,ISO 12217-1:2002,Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m,Petits navires — Évaluation et catégorisation de la stabilité et de la flottabilité — Partie 1: Bateaux à propulsion non vélique d'une longueur de coque supérieure ou égale à 6 m,2002-04-25,1,['47.080'],ISO/TC 188,9599,,[55957],"['en','fr']",47,"<p>This part of ISO 12217 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats vulnerable to swamping are also encompassed.</p><p>The evaluation of stability and buoyancy properties using this part of ISO 122

46451,IS,Amd,ISO 12217-1:2002/Amd 1:2009,Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m — Amendment 1,Petits navires — Évaluation et catégorisation de la stabilité et de la flottabilité — Partie 1: Bateaux à propulsion non vélique d'une longueur de coque supérieure ou égale à 6 m — Amendement 1,2009-06-08,1,['47.080'],ISO/TC 188,9599,,"[55957,68140]","['en','fr']",19,

55957,IS,,ISO 12217-1:2013,Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m,Petits navires — Évaluation et catégorisation de la stabilité et de la flottabilité — Partie 1: Bateaux à propulsion non vélique d'une longueur de coque supérieure ou égale à 6 m,2013-02-20,2,['47.080'],ISO/TC 188,9599,"[33073,46451]",[68140],"['en','fr']",74,"<p>ISO 12217-1:2013 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats vulnerable to swamping are also encompassed.</p><p>The evaluation of stability and buoyancy properties using ISO 12217-1

68140,IS,,ISO 12217-1:2015,Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m,Petits navires — Évaluation et catégorisation de la stabilité et de la flottabilité — Partie 1: Bateaux à propulsion non vélique d'une longueur de coque supérieure ou égale à 6 m,2015-10-15,3,['47.080'],ISO/TC 188,9599,"[55957,46451]",[79072],"['en','fr']",76,"<p>ISO 12217-1:2015 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats susceptible to swamping are also encompassed.</p><p>The evaluation of stability and buoyancy properties using this part

23259,IS,,ISO 12217-2:2002,Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m,Petits navires — Évaluation et catégorisation de la stabilité et de la flottabilité — Partie 2: Bateaux à voiles d'une longueur de coque supérieure ou égale à 6 m,2002-04-25,1,['47.080'],ISO/TC 188,9599,,[55958],"['en','fr']",59,"<p>This part of ISO 12217 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats vulnerable to swamping are also encompassed.</p><p>The evaluation of stability and buoyancy properties using this part of ISO 12217 will enable the b

55958,IS,,ISO 12217-2:2013,Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m,Petits navires — Évaluation et catégorisation de la stabilité et de la flottabilité — Partie 2: Bateaux à voiles d'une longueur de coque supérieure ou égale à 6 m,2013-02-20,2,['47.080'],ISO/TC 188,9599,[23259],[68141],"['en','fr']",86,"<p>ISO 12217-2:2013 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats vulnerable to swamping are also encompassed.</p><p>The evaluation of stability and buoyancy properties using ISO 12217-2:2013 will enable the boat t

68141,IS,,ISO 12217-2:2015,Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m,Petits navires — Évaluation et catégorisation de la stabilité et de la flottabilité — Partie 2: Bateaux à voiles d'une longueur de coque supérieure ou égale à 6 m,2015-10-15,3,['47.080'],ISO/TC 188,9599,[55958],[79073],"['en','fr']",90,"<p>ISO 12217-2:2015 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats susceptible to swamping are also encompassed.</p><p>The evaluation of stability and buoyancy properties using ISO 12217-2:2015 will enable the boat

28594,IS,,ISO 12217-3:2002,Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m,Petits navires — Évaluation de la stabilité et de la flottabilité et catégorisation — Partie 3: Bateaux d'une longueur de coque inférieure à 6 m,2002-06-06,1,['47.080'],ISO/TC 188,9599,,[55959],"['en','fr']",47,"<p>This part of ISO 12217 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of craft vulnerable to swamping are also encompassed.</p><p>The evaluation of stability and buoyancy properties using this part of ISO 12217 will enable the boat to be assigned to a design category (

46452,IS,Amd,ISO 12217-3:2002/Amd 1:2009,Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m — Amendment 1,Petits navires — Évaluation de la stabilité et de la flottabilité et catégorisation — Partie 3: Bateaux d'une longueur de coque inférieure à 6 m — Amendement 1,2009-06-08,1,['47.080'],ISO/TC 188,9599,,"[55959,68142]","['en','fr']",13,

55959,IS,,ISO 12217-3:2013,Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m,Petits navires — Évaluation et catégorisation de la stabilité et de la flottabilité — Partie 3: Bateaux d'une longueur de coque inférieure à 6 m,2013-02-20,2,['47.080'],ISO/TC 188,9599,"[28594,46452]",[68142],"['en','fr']",74,"<p>ISO 12217-3:2013 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of craft vulnerable to swamping are also encompassed.</p><p>The evaluation of stability and buoyancy properties using ISO 12217-3:2013 will enable the boat to be assigned to a design categor

68142,IS,,ISO 12217-3:2015,Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m,Petits navires — Évaluation et catégorisation de la stabilité et de la flottabilité — Partie 3: Bateaux d'une longueur de coque inférieure à 6 m,2015-10-15,3,['47.080'],ISO/TC 188,9599,"[55959,46452]",[79074],"['en','fr']",77,"<p>ISO 12217-3:2015 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of craft susceptible to swamping are also encompassed.</p><p>The evaluation of stability and buoyancy properties using ISO 12217-3:2015 will enable the boat to be assigned to a design catego

50019,IS,,ISO 12219-1:2012,Interior air of road vehicles — Part 1: Whole vehicle test chamber — Specification and method for the determination of volatile organic compounds in cabin interiors,Air intérieur des véhicules routiers — Partie 1: Enceinte d'essai pour un véhicule complet — Spécification et méthode de détermination des composés organiques volatils dans les habitacles d'automobiles,2012-07-10,1,"['43.020','13.040.20']",ISO/TC 146/SC 6,9599,,[72410],"['en','fr']",22,"<p>ISO 12219-1:2012 describes and specifies the whole vehicle test chamber, the vapour sampling assembly and the operating conditions for the determination of volatile organic compounds (VOCs), and carbonyl compounds in

5835,IS,,ISO 1222:1973,Photography — Tripod connections,Photographie — Raccords de pied,1973-09-01,1,['37.040.10'],ISO/TC 42,9599,,[5836],"['en','fr']",2,

5836,IS,,ISO 1222:1987,Photography — Tripod connections,Photographie — Pièces d'assemblage d'un appareil photographique sur un pied,1987-11-19,2,['37.040.10'],ISO/TC 42,9599,[5835],"[33323,20054]","['en','fr']",2,"<p>Specified are details of the screw connectins to be used between a camera and a tripod or other accessory. The form of the connection is shown, and details are given of the nut and bolt screw threads.</p>"

33323,IS,,ISO 1222:2003,Photography — Tripod connections,Photographie — Pièces d'assemblage d'un appareil photographique sur un pied,2003-03-03,3,['37.040.10'],ISO/TC 42,9599,[5836],[55918],['en'],4,<p>ISO 1222:2003 specifies the screw connections to be used between a camera and a tripod or other accessories.</p>

39007,IS,Cor,ISO 1222:2003/Cor 1:2003,Photography — Tripod connections — Technical Corrigendum 1,Photographie — Pièces d'assemblage d'un appareil photographique sur un pied — Rectificatif technique 1,2003-11-05,3,['37.040.10'],ISO/TC 42,9599,,[55918],['en'],1,

3103,IS,,ISO 12222:1996,"Cinematography — Manufacturer-printed, latent image identification on 16 mm, 35 mm and 65 mm motion-picture film — Specifications and dimensions","Cinématographie — Identification d'image latente, imprimée par le fabricant, sur films cinématographiques 16 mm, 35 mm et 65 mm — Spécifications et dimensions",1996-11-14,1,['37.060.20'],ISO/TC 36,9599,,[29930],['en'],17,

29930,IS,,ISO 12222:1998,"Cinematography — Manufacturer-printed, latent image identification on 16 mm, 35 mm and 65 mm motion-picture film — Specifications and dimensions","Cinématographie — Identification d'image latente, imprimée par le fabricant, sur films cinématographiques 16 mm, 35 mm et 65 mm — Spécifications et dimensions",1998-10-22,2,['37.060.20'],ISO/TC 36,9599,[3103],[32994],['en'],18,

32994,IS,,ISO 12222:2000,"Cinematography — Manufacturer-printed, latent image identification on 16 mm, 35 mm and 65 mm motion-picture film — Specifications and dimensions","Cinématographie — Identification d'image latente, imprimée par le fabricant, sur films cinématographiques 16 mm, 35 mm et 65 mm — Spécifications et dimensions",2000-11-16,3,['37.060.20'],ISO/TC 36,9599,[29930],"[55354,59518]",['en'],20,

39887,IS,Cor,ISO 12222:2000/Cor 1:2004,"Cinematography — Manufacturer-printed, latent image identification on 16 mm, 35 mm and 65 mm motion-picture film — Specifications and dimensions — Technical Corrigendum 1","Cinématographie — Identification d'image latente, imprimée par le fabricant, sur films cinématographiques 16 mm, 35 mm et 65 mm — Spécifications et dimensions — Rectificatif technique 1",2004-01-13,3,['37.060.20'],ISO/TC 36,9599,,"[55354,59518]",['en'],1,

21280,IS,,ISO 12224-1:1997,"Solder wire, solid and flux cored — Specification and test methods — Part 1: Classification and performance requirements","Fils d'apport de brasage, pleins et à flux incorporé — Spécifications et méthodes d'essai — Partie 1: Classification et exigences de performance",1997-06-05,1,['25.160.50'],ISO/TC 44/SC 12,9599,,[83714],"['en','fr']",11,

21281,IS,,ISO 12224-2:1997,Flux cored solder wire — Specification and test methods — Part 2: Determination of flux content,"Fils d'apport de brasage, pleins et à flux incorporé — Spécifications et méthodes d'essai — Partie 2: Détermination de la teneur en flux",1997-12-11,1,['25.160.50'],ISO/TC 44/SC 12,9599,,[83715],"['en','fr']",4,

21319,IS,,ISO 12228:1999,Animal and vegetable fats and oils — Determination of individual and total sterols contents — Gas chromatographic method,Corps gras d'origines animale et végétale — Détermination de la teneur en stérols individuels et totaux — Méthode par chromatographie en phase gazeuse,1999-03-04,1,['67.200.10'],ISO/TC 34/SC 11,9599,,"[60249,60248]","['en','fr']",16,

5837,IS,,ISO 1223:1981,Cinematography — Picture areas for motion-picture films and slides for television — Position and dimensions,Cinématographie — Champs d'image pour films et diapositives destinés à la télévision — Emplacements et dimensions,1981-04-01,1,['37.060.20'],ISO/TC 36,9599,,"[5838,5839]",['en'],3,

5838,IS,,ISO 1223:1985,Cinematography — Picture areas for motion- picture films and slides for television — Position and dimensions,Cinematographie — Champs d'image pour films et diapositives destinés à la télévision — Emplacements et dimensions,1985-08-15,2,['37.060.20'],ISO/TC 36,9599,[5837],[5839],"['en','fr']",4,

5839,IS,,ISO 1223:1993,Cinematography — Picture areas for motion-picture films and slides for television — Position and dimensions,Cinématographie — Champs d'image pour films et diapositives destinés à la télévision — Emplacements et dimensions,1993-05-06,3,['37.060.20'],ISO/TC 36,9599,"[5838,5837]",[31172],['en'],7,"<p>Defines those areas of the images on 35 mm, 16 mm and 8 mm Type S motion-picture films and on 5 cm × 5 cm slides, which are transmitted by television, together with the action and safe title areas within which any pictorial or written matter may be expected to be received on a domestic television receiver. Applies to non-anamorphic images of nominal 4:3 ratio.</p>"

21321,IS,,ISO 12230:1996,Polybutene (PB) pipes — Effect of time and temperature on the expected strength,Tubes en polybutène (PB) — Influence du temps et de la température sur la résistance espérée,1996-12-26,1,['23.040.20'],ISO/TC 138/SC 5,9599,,[57242],"['en','fr']",6,"<p>Gives the minimum values for expected strength as a function of time and temperature in the form of reference lines, for use in calculations on polybutene pipes.</p>"

77079,IS,,ISO 12231-1:2020,Photography — Electronic still picture imaging terminology — Part 1: Supplemental vocabulary,Photographie — Terminologie des prises de vue électroniques — Partie 1: Vocabulaire supplémentaire,2020-12-10,1,"['37.040.10','01.040.37']",ISO/TC 42,9599,[53614],[87774],['en'],6,"<p>This document defines terms used in electronic still picture imaging that have not been defined by other ISO/TC 42 standards, Technical Specifications or Technical Reports.</p>"

21019,IS,,ISO 12231:1997,Photography — Electronic still-picture cameras — Terminology,Photographie — Caméras de prises de vue électroniques — Terminologie,1997-06-12,1,"['37.040.10','01.040.37']",ISO/TC 42,9599,,[36062],['en'],8,

36062,IS,,ISO 12231:2005,Photography — Electronic still picture imaging — Vocabulary,Photographie — Prises de vue électroniques — Vocabulaire,2005-02-03,2,"['37.040.10','01.040.37']",ISO/TC 42,9599,[21019],[53614],['en'],45,ISO 12231:2005 defines terms used in electronic still picture imaging.<p>Only terms related to electronic still picture imaging are included. These terms are relevant to the current tasks or are of general interest in electronic still picture imaging.</p>

53614,IS,,ISO 12231:2012,Photography — Electronic still picture imaging — Vocabulary,Photographie — Prises de vue électroniques — Vocabulaire,2012-01-23,3,"['37.040.10','01.040.37']",ISO/TC 42,9599,[36062],"[81914,77079]",['en'],35,<p>1 Scope</p><p>This International Standard defines terms used in electronic still picture imaging.</p><p>Only terms related to electronic still picture imaging are defined. These terms are relevant to current tasks or are of general interest in electronic still picture imaging.</p>

21020,IS,,ISO 12232:1998,Photography — Electronic still-picture cameras — Determination of ISO speed,Photographie — Appareils de prises de vue électroniques — Détermination de la sensibilité ISO,1998-08-06,1,['37.040.10'],ISO/TC 42,9599,,[37777],['en'],14,

37777,IS,,ISO 12232:2006,"Photography — Digital still cameras — Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index","Photographie — Appareils de prises de vue numériques — Détermination de l'indice d'exposition, des régimes de vitesse ISO, de la sensibilité normale de sortie et de l'indice d'exposition recommandé",2006-04-20,2,['37.040.10'],ISO/TC 42,9599,[21020],[73758],['en'],17,"<p>ISO 12232:2006 specifies the method for assigning and reporting ISO speed ratings, ISO speed latitude ratings, standard output sensitivity values, and recommended exposure index values, for digital still cameras. ISO 12232:2006 is applicable to both m

33715,IS,,ISO 12233:2000,Photography — Electronic still-picture cameras — Resolution measurements,Photographie — Appareils de prises de vue électroniques — Mesurages de la résolution,2000-08-31,1,['37.040.10'],ISO/TC 42,9599,,[59419],['en'],32,

59419,IS,,ISO 12233:2014,Photography — Electronic still picture imaging — Resolution and spatial frequency responses,Photographie — Imagerie des prises de vues électroniques — Résolution et réponses en fréquence spatiale,2014-02-11,2,['37.040.10'],ISO/TC 42,9599,[33715],[71696],['en'],50,<p>ISO 12233:2014 specifies methods for measuring the resolution and the SFR of electronic still-picture cameras. It is applicable to the measurement of both monochrome and colour cameras which output digital data or analog video signals.</p>

71696,IS,,ISO 12233:2017,Photography — Electronic still picture imaging — Resolution and spatial frequency responses,Photographie — Imagerie des prises de vues électroniques — Résolution et réponses en fréquence spatiale,2017-01-10,3,['37.040.10'],ISO/TC 42,9599,[59419],[79169],['en'],49,<p>ISO 12233:2017 specifies methods for measuring the resolution and the SFR of electronic still-picture cameras. It is applicable to the measurement of both monochrome and colour cameras which output digital data or analogue video signals.</p>

79169,IS,,ISO 12233:2023,Photography — Electronic still picture imaging — Resolution and spatial frequency responses,Photographie — Imagerie des prises de vues électroniques — Résolution et réponses en fréquence spatiale,2023-02-17,4,['37.040.10'],ISO/TC 42,9599,[71696],[88626],['en'],75,<p class='MsoBodyText' style='mso-layout-grid-align: none; text-autospace: none;'><span lang='EN-GB' style='mso-bidi-font-size: 12.0pt;'>This document specifies methods for measuring the resolution and the spatial frequency response (SFR) of electronic still-picture cameras. It is applicable to the measurement of both monochrome and colour cameras which output digital data or analogue video signals.</span></

29376,IS,,ISO 12234-1:2001,Electronic still-picture imaging - Removable memory — Part 1: Basic removable-memory module,Imagerie de prises de vue électroniques — Mémoire mobile — Partie 1: Modèle de mémoire mobile de base,2001-09-20,1,['37.040.99'],ISO/TC 42,9599,,[42294],['en'],17,

42294,IS,,ISO 12234-1:2007,Electronic still-picture imaging — Removable memory — Part 1: Basic removable-memory model,Imagerie de prises de vue électroniques — Mémoire mobile — Partie 1: Modèle de mémoire mobile de base,2007-10-24,2,['37.040.99'],ISO/TC 42,9599,[29376],[53651],['en'],19,"<p>ISO 12234-2:2007 specifies a basic removable-memory reference model for digital electronic still-picture cameras. The reference model includes image file formats for storing image data and metadata, filing system requirements for storing and retrieving the image files on the removable memory, and media profiles which are specific to a given storage technology. The reference model allows the image data and

53651,IS,,ISO 12234-1:2012,Electronic still-picture imaging — Removable memory — Part 1: Basic removable-memory model,Imagerie de prises de vue électroniques — Mémoire amovible — Partie 1: Modèle de mémoire amovible de base,2012-06-26,3,['37.040.99'],ISO/TC 42,9599,[42294],[87775],['en'],33,"<p>1 Scope</p><p>This part of ISO 12234 specifies a basic removable-memory reference model for digital electronic still-picture cameras. The reference model includes image file formats for storing image data and metadata, file system requirements for storing and retrieving the image files on the removable memory, and media profiles which are specific to a given storage technology. The reference model all

21332,IS,,ISO 12236:1996,Geotextiles and geotextile-related products — Static puncture test (CBR test),Géotextiles et produits apparentés — Essai de poinçonnement statique (essai CBR),1996-10-24,1,['59.080.70'],ISO/TC 221,9599,,[40762],"['en','fr']",9,"<p>Specifies a method for the determination of puncture resistance by measuring the force required to push a flat ended plunger through geotextiles. Applicable to most of products, but not to geotextiles with apertures greater than 10 mm.</p>"

40762,IS,,ISO 12236:2006,Geosynthetics — Static puncture test (CBR test),Géosynthétiques — Essai de poinçonnement statique (essai CBR),2006-08-25,2,['59.080.70'],ISO/TC 221,9599,[21332],[83577],"['en','fr']",6,"<p>ISO 12236:2006 specifies a method for the determination of the puncture resistance by measuring the force required to push a flat-ended plunger through geosynthetics.</p><p>The test is normally carried out on dry specimens conditioned in the specified atmosphere. The test is applicable to most types of products, but not to materials with apertures greater than 10 mm. </p>"

20887,IS,,ISO 12238:2001,Pneumatic fluid power — Directional control valves — Measurement of shifting time,Transmissions pneumatiques — Distributeurs de commande directionnels — Mesure du temps de commutation,2001-07-26,1,['23.100.50'],ISO/TC 131/SC 5,9599,,"[77084,69097]","['en','fr']",12,"<p>This International Standard</p><p>— specifies test procedures for measuring the shifting times of electrically- or pneumatically-operated directional</p><p>control valves and moving-part logic elements,</p><p>— establishes a definition for shifting time, and</p><p>— is intended to improve the application of pneumatic fluid power by providing users and manufacturers of</p><p>pneumatic valves with a stan

36866,IS,,ISO 12239:2003,Fire detection and fire alarm systems — Smoke alarms,Systèmes de détection d'incendie et d'alarme — Détecteurs de fumée,2003-12-11,1,['13.220.20'],ISO/TC 21/SC 3,9599,,[55265],['en'],55,"<p>ISO 12239:2003 specifies requirements, test methods, performance criteria, and manufacturer's instructions for smoke alarms (including those with optional features) that operate using scattered light, transmitted light, or ionization, and are intended for household or similar residential applications. Smoke alarms with special characteristics and developed for specific risks and devises intended for incorporation in systems using separate control and indicating equipment are not c

55265,IS,,ISO 12239:2010,"Smoke alarms using scattered light, transmitted light or ionization","Détecteurs de fumée à lumière dispersée, lumière transmise ou ionisation",2010-12-14,2,['13.220.20'],ISO/TC 21/SC 3,9599,[36866],[74519],['en'],59,"<p>ISO 12239:2010 specifies requirements, test methods, performance criteria, and manufacturer's instructions for smoke alarms that operate using scattered light, transmitted light, or ionization, and are intended for household or similar residential applications. For the testing of other types of smoke alarms, or smoke alarms working on different principles, ISO 12239:2010 should be used only for guidance. Smoke alarms with special characteristics and

5841,IS,,ISO 1224:1984,Rolling bearings — Instrument precision bearings,Roulements — Roulements de précision pour instruments,1984-10-01,1,['21.100.20'],ISO/TC 4,9599,,"[43723,43724,40981]","['en','fr']",13,"<p>Specifies the characteristics that define instrument precision rolling bearings, their types, boundary dimensions, tolerances and internal clearance, classifications used for selective assembly, torque definitions and test conditions, and limitations of bearing yield rates.</p>"

21345,IS,,ISO 12241:1998,Thermal insulation for building equipment and industrial installations — Calculation rules,Isolation thermique des équipements du bâtiment et des installations industrielles — Méthodes de calcul,1998-03-12,1,"['91.140.01','91.120.10']",ISO/TC 163/SC 2,9599,,"[39742,41703]","['en','fr']",39,

41703,IS,,ISO 12241:2008,Thermal insulation for building equipment and industrial installations — Calculation rules,Isolation thermique des équipements de bâtiments et des installations industrielles — Méthodes de calcul,2008-06-09,2,"['91.140.01','91.120.10']",ISO/TC 163/SC 2,9599,"[21345,37044]",[74655],"['en','fr']",45,"<p>ISO 12241:2008 gives rules for the calculation of heat-transfer-related properties of building equipment and industrial installations, predominantly under steady-state conditions. ISO 12241:2008 also gives a simplified approach for the treatment of thermal bridges.</p>"

20925,IS,,ISO 12244:1997,"Rubber, vulcanized or thermoplastic — Determination of elongation, creep and tension set at constant load","Caoutchouc vulcanisé ou thermoplastique — Détermination de l'allongement, du fluage et de la déformation rémanente en tension sous charge constante",1997-05-29,1,['83.060'],ISO/TC 45/SC 2,9599,,[33673],"['en','fr']",5,

51294,IS,,ISO 12251:2011,Diesel engines — Clamp mounted CR fuel injectors — Mounting dimensions,Moteurs diesels — Injecteurs de combustible pour rampe commune fixés par patte — Dimensions de montage,2011-01-21,1,['43.060.40'],ISO/TC 22/SC 34,9599,,[70132],['en'],9,<p>ISO 12251:2011 specifies dimensional requirements for clamp mounted CR fuel injectors and their corresponding cylinder head features in diesel engines.</p>

70132,IS,,ISO 12251:2017,Diesel engines — Clamp mounted CR fuel injectors — Mounting dimensions,Moteurs diesels — Injecteurs de combustible pour rampe commune fixée par patte — Dimensions de montage,2017-10-04,2,['43.060.40'],ISO/TC 22/SC 34,9599,[51294],[88248],['en'],11,"<p>ISO 12251 specifies dimensional requirements for clamp mounted CR fuel injectors and their corresponding cylinder head features in diesel engines.</p><p>According to the injector nozzle capnut, the clamp mounted CR fuel injectors can be divided into two types:</p><p>a) Type A, where the nozzle capnut is straight (see Figure 4);</p><p>b) Type B, where the nozzle capnut is stepped (see Figure 5).</p><p>Each clamp mo

1828,IS,,ISO 12260:1996,"Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions","Aéronautique et espace — Vis à tête cylindrique, à empreinte cruciforme déportée, avec ou sans saillies antidérapantes, à fût dégagé et filetage MJ court ou de longueur moyenne, en matériau métallique, revêtues ou non revêtues, des classes de résistance inférieures ou égales à 1 100 MPa — Dimensions",1996-10-24,1,['49.030.20'],ISO/TC 20/SC 4,9599,,[66321],"['en','fr']",2,"<p>Gives the dimensions of pan head screws with internal offset c

1900,IS,,ISO 12261:1996,"Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions","Aéronautique et espace — Vis à tête cylindrique, à empreinte cruciforme déportée, avec ou sans saillies antidérapantes, à tige de diamètre égal au diamètre sur flancs et filetage MJ long, en matériau métallique, revêtues ou non revêtues, des classes de résistance inférieures ou égales à 1 100 MPa — Dimensions",1996-10-24,1,['49.030.20'],ISO/TC 20/SC 4,9599,,[66322],"['en','fr']",2,"<p>Gives the dimensions of pan head screws with internal of

66322,IS,,ISO 12261:2016,"Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions","Aéronautique et espace — Vis à tête cylindrique, à empreinte cruciforme déportée, avec ou sans saillies antidérapantes, à tige de diamètre égal au diamètre sur flancs et filetage MJ long, en matériau métallique, revêtues ou non revêtues, des classes de résistance inférieures ou égales à 1 100 MPa — Dimensions",2016-02-12,2,['49.030.20'],ISO/TC 20/SC 4,9599,[1900],[84017],['en'],2,"<p>ISO 12261:2016 specifies the dimensions of pan head scre

5843,IS,,ISO 1227:1979,"Starch, including derivatives and by-products — Vocabulary","Amidons, fécules, dérivés et sous-produits — Vocabulaire",1979-06-01,2,"['67.180.20','01.040.67']",ISO/TC 93,9599,,[5844],"['en','fr']",23,

1837,IS,,ISO 12273:1997,"Aerospace — Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/425 degrees C — Dimensions","Aéronautique et espace — Écrous à river, à freinage interne, flottants, orientables, double patte, à filetage MJ, classifications: 900 MPa (à température ambiante)/235 degrés C, 900 MPa (à température ambiante)/315 degrés C et 900 MPa (à température ambiante)/425 degrés C — Dimensions",1997-07-31,1,['49.030.30'],ISO/TC 20/SC 4,9599,,[55763],"['en','fr']",2,

5845,IS,,ISO 1228:1975,Plastics — Poly(ethylene terephthalate) in dilute solution — Determination of viscosity number,Matières plastiques — Poly(éthylène téréphtalate) en solution diluée — Détermination de l'indice de viscosité,1975-06-01,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[6232],"['en','fr']",3,

36989,IS,,ISO 12289:2003,"Aerospace — Rivets, solid, in corrosion-resisting steel — Procurement specification","Aéronautique et espace — Rivets ordinaires, en acier résistant à la corrosion — Spécification d'approvisionnement",2003-08-11,1,['49.030.60'],ISO/TC 20/SC 4,9599,,[66323],"['en','fr']",9,<p>ISO 12289:2003 specifies the characteristics and quality assurance requirements for solid rivets made in corrosion-resisting steel for aerospace construction. It is applicable whenever it is referenced in a definition document.</p>

5846,IS,,ISO 1229:1972,Photography — Expendable photoflash lamps — Determination of the light output,Photographie — Lampes à éclairs à combustion — Détermination de l'émission lumineuse,1972-08-01,1,['37.040.10'],ISO/TC 42,9599,,[5847],"['en','fr']",4,

51323,IS,,ISO 12297:2012,Rolling bearings — Steel cylindrical rollers — Dimensions and tolerances,Roulements — Rouleaux cylindriques en acier — Dimensions et tolérances,2012-03-15,1,['21.100.20'],ISO/TC 4/SC 5,9599,,"[76434,69103]","['en','fr']",14,

3925,IS,,ISO 123:1974,Rubber latex — Sampling,Latex d'élastomère — Échantillonnage,1974-01-01,1,['83.040.10'],ISO/TC 45,9599,,[3926],"['en','fr']",2,

3926,IS,,ISO 123:1985,Rubber latex — Sampling,Latex de caoutchouc — Échantillonnage,1985-08-01,2,['83.040.10'],ISO/TC 45/SC 3,9599,[3925],[23281],"['en','fr']",4,

5848,IS,,ISO 1230:1973,Photography — Determination of flash guide numbers,Photographie — Détermination des nombres-guides des appareils à éclairs,1973-06-01,1,['37.040.10'],ISO/TC 42,9599,,[5849],"['en','fr']",2,

5849,IS,,ISO 1230:1992,Photography — Determination of flash guide numbers,Photographie — Détermination des nombres-guides des appareils à éclairs,1992-02-27,2,['37.040.10'],ISO/TC 42,9599,[5848],"[28689,43503]",['en'],5,<p>Specifies a method for measuring the reflector factor. Contains formulae for calculating the ISO guide number for flash lamps (with and without integral factors resp.). Gives terms and definitions.</p>

15367,IS,,ISO 12301:1992,Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics,Paliers lisses — Techniques de contrôle de la qualité et vérifications des caractéristiques de qualité géométriques et des matériaux,1992-12-03,1,['21.100.10'],ISO/TC 123/SC 5,9599,,[36511],"['en','fr']",35,"<p>Applies to metallic thin-walled half-bearings (ISO 3548), metallic thin-walled flanged bearings (ISO 6864), metallic thick-walled half-bearings (with and without flange), wrapped bushes (ISO 3547), unsplit metallic bushes (with and without flange) (ISO 4379), thermoplastic bushes (with and without flange), ring-type thrust washers and pressed bimetall

25064,IS,Cor,ISO 12301:1992/Cor 1:1995,Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics — Technical Corrigendum 1,Paliers lisses — Techniques de contrôle de la qualité et vérifications des caractéristiques de qualité géométriques et des matériaux — Rectificatif technique 1,1995-02-23,1,['21.100.10'],ISO/TC 123/SC 5,9599,,[36511],"['en','fr']",3,<p>Contains some minor amendments.</p>

15368,IS,,ISO 12302:1993,Plain bearings — Quality characteristics — Statistical process control (SPC),Paliers lisses — Caractéristiques de qualité — Contrôle statistique du procédé (CSP),1993-11-11,1,['21.100.10'],ISO/TC 123/SC 5,9599,,[68624],"['en','fr']",3,<p>Specifies for plain bearings (except thick-walled half-bearings) those quality characteristics in accordance with ISO 12301 which can be used to regulate and control a production process on the basis of statistical process control. Covers dimensional variables but does not take account of attributes.</p>

17783,IS,,ISO 12306:1994,Plain bearings — Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes,Paliers lisses — Mesurage de l'épaisseur de paroi des demi-coussinets minces et des bagues minces,1994-02-03,1,['21.100.10'],ISO/TC 123/SC 5,9599,,"[44400,41337]","['en','fr']",12,"<p>Describes in accordance with ISO 12301 the checking methods (line measurement around the circumference, line measurement in the axial direction, point measurement) and requirements for measuring equipment. Is not applicable to thermoplastic bushes.</p>"

15403,IS,,ISO 12307-1:1994,Plain bearings — Wrapped bushes — Part 1: Checking the outside diameter,Paliers lisses — Bagues roulées — Partie 1: Contrôle du diamètre extérieur,1994-12-22,1,['21.100.10'],ISO/TC 123/SC 5,9599,,"[41334,34010]","['en','fr']",17,"<p>Specifies, in accordance with ISO 12301, the checking of the outside diameter of wrapped bushes (methods A and B specified in ISO 3547) and describes the necessary checking methods and measuring equipment. Checking of the outside diameter of wrapped bushes can only be carried out under a constraining load by use of specialized measuring equipment. The dimensions and tolerances of wrapped bushes are given in ISO 3547. Checking the wall t

22284,IS,,ISO 12307-2:2000,Plain bearings — Checking of wrapped bushes — Part 2: Checking the inside diameter,Paliers lisses — Contrôle des bagues roulées — Partie 2: Contrôle du diamètre intérieur,2000-09-07,1,['21.100.10'],ISO/TC 123/SC 5,9599,,[41336],"['en','fr']",5,

21090,IS,,ISO 12308:1994,"Plain bearings — Quality assurance — Sample types — Definitions, applications and testing","Paliers lisses — Assurance de la qualité — Types d'échantillons — Définitions, utilisation et essais",1994-02-03,1,['21.100.10'],ISO/TC 123/SC 5,9599,,[68625],"['en','fr']",4,"<p>Defines different types of plain bearing samples such as are exchanged between purchaser and manufacturer: samples used for tests and examinations which are carried out in the experimental stage and pilot lot stage; samples used to prove that the quality is in accordance with the quality requirements (dimensions, material and performance specification); samples which give selective information about

51350,IS,,ISO 12311:2013,Personal protective equipment — Test methods for sunglasses and related eyewear,Équipement de protection individuelle — Méthodes d'essai pour lunettes de soleil et articles de lunetterie associés,2013-07-26,1,['13.340.20'],ISO/TC 94/SC 6,9599,,[77506],"['en','fr']",85,<p>ISO 12311:2012 specifies reference test methods for determining the properties of sunglasses given in ISO 12312 (all parts). It is applicable to all sunglasses and related eyewear.</p><p>Other test methods may be used if shown to be equivalent.</p>

51351,IS,,ISO 12312-1:2013,Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use,Protection des yeux et du visage — Lunettes de soleil et articles de lunetterie associés — Partie 1: Lunettes de soleil pour usage général,2013-08-05,1,['13.340.20'],ISO/TC 94/SC 6,9599,,[77321],"['en','fr']",23,"<p>ISO 12312-1:2012 is applicable to all afocal (plano power) sunglasses and clip-ons for general use, including road use and driving, intended for protection against solar radiation.</p>"

67151,IS,Amd,ISO 12312-1:2013/Amd 1:2015,Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use — Amendment 1,Protection des yeux et du visage — Lunettes de soleil et articles de lunetterie associés — Partie 1: Lunettes de soleil pour usage général — Amendement 1,2015-09-08,1,['13.340.20'],ISO/TC 94/SC 6,9599,,[77321],"['en','fr']",2,

5852,IS,,ISO 1233:1975,Plastics — Determination of viscosity number of methyl methacrylate polymers and copolymers in dilute solution,Matières plastiques — Détermination de l'indice de viscosité des polymères et copolymères du méthacrylate de méthyle en solution diluée,1975-09-01,1,['83.080.01'],ISO/TC 61,9599,,[6233],"['en','fr']",3,

32253,IS,,ISO 12333:2000,Aerospace — Constant displacement hydraulic motors — General specifications for 35 000 kPa systems,Aéronautique et espace — Moteurs hydrauliques à cylindrée fixe — Spécifications générales pour circuits 35 000 kPa,2000-02-03,1,['49.080'],ISO/TC 20/SC 10,9599,,[61655],"['en','fr']",24,

1999,IS,,ISO 12334:2000,"Aerospace — Hydraulic, pressure-compensated, variable delivery pumps — General requirement for 35 000 kPa systems",Aéronautique et espace — Pompes hydrauliques à débit variable régulé en fonction de la pression — Exigences générales pour circuits 35 000 kPa,2000-02-10,1,['49.080'],ISO/TC 20/SC 10,9599,,[61656],"['en','fr']",28,

5853,IS,,ISO 1234:1976,Split pins — Metric series,Goupilles fendues — Série métrique,1976-04-01,1,['21.060.50'],ISO/TC 2,9599,,[20000],"['en','fr']",2,

51391,IS,,ISO 12344:2010,Thermal insulating products for building applications — Determination of bending behaviour,Produits isolants thermiques destinés aux applications du bâtiment — Détermination du comportement en flexion,2010-04-13,1,['91.100.60'],ISO/TC 163/SC 1,9599,,[92123],['en'],8,<p>ISO 12344:2010 specifies the equipment and procedures for determining the bending behaviour of full-size products (Method A) and test specimens (Method B) under the action of three-point loading. It is applicable to thermal insulating products for building applications.</p><p>The test is designed to determine the bending strength of products and their deflection at a given load.</p><p>The method can be

35484,IS,,ISO 12345:2002,Diesel engines — Cleanliness assessment of fuel injection equipment,Moteurs diesels — Évaluation de la propreté de l'équipement d'injection,2002-11-19,1,['43.060.40'],ISO/TC 22,9599,,[52966],['en'],23,"<p>ISO 12345 specifies cleanliness assessment procedures for evaluating the amount of debris found within the constituent parts of a diesel fuel injection system that could lead to a reduction in the system's operational effectiveness. It is mainly concerned with new equipment not yet fitted to an engine, and is therefore aimed primarily at engine and fuel injection equipment manufacturers.</p>"

52966,IS,,ISO 12345:2013,Diesel engines — Cleanliness assessment of fuel injection equipment,Moteurs diesels — Évaluation de propreté pour équipement d'injection de combustible,2013-03-15,2,['43.060.40'],ISO/TC 22/SC 34,9599,[35484],[77439],"['en','ru']",37,"<p>ISO 12345:2013 specifies cleanliness assessment procedures for evaluating the amount of debris found within the clean side of diesel fuel injection assemblies, which could lead to a reduction in the system's operational effectiveness.</p><p>While other International Standards, e.g. the ISO 16232 series, relate to cleanliness of components used in road vehicle fluid circuits, ISO 12345:2013 is focused on diesel fuel injection assemblie

34353,IS,,ISO 12353-1:2002,Road vehicles — Traffic accident analysis — Part 1: Vocabulary,Véhicules routiers — Analyse des accidents de la circulation — Partie 1: Vocabulaire,2002-03-07,1,"['43.040.80','01.040.43']",ISO/TC 22/SC 36,9599,,[68075],"['en','fr']",39,<p>This part of ISO 12353 establishes a terminology relating to the investigation and analysis of road traffic accidents and to the application of accident data.</p>

3927,IS,,ISO 124:1974,Rubber latices — Determination of total solids content,Latex d'élastomère — Détermination des matières solides totales,1974-04-01,1,['83.040.10'],ISO/TC 45,9599,,"[3929,3928]","['en','fr']",1,

3928,IS,,ISO 124:1985,Rubber latices — Determination of total solids content,Latex de caoutchouc — Détermination des matières solides totales,1985-10-31,2,['83.040.10'],ISO/TC 45/SC 3,9599,[3927],[3929],"['en','fr']",2,

3929,IS,,ISO 124:1992,Rubber latices — Determination of total solids content,Latex de caoutchouc — Détermination des matières solides totales,1992-03-05,3,['83.040.10'],ISO/TC 45/SC 3,9599,"[3927,3928]",[23842],"['en','fr']",2,

23842,IS,,ISO 124:1997,"Latex, rubber — Determination of total solids content",Latex de caoutchouc — Détermination des matières solides totales,1997-06-05,4,['83.040.10'],ISO/TC 45/SC 3,9599,[3929],[51088],"['en','fr']",4,

42824,IS,Amd,ISO 124:1997/Amd 1:2006,"Latex, rubber — Determination of total solids content — Amendment 1: Precision data",Latex de caoutchouc — Détermination des matières solides totales — Amendement 1: Données de fidélité,2006-02-02,4,['83.040.10'],ISO/TC 45/SC 3,9599,,[51088],"['en','fr']",2,

43711,IS,Amd,ISO 124:1997/Amd 2:2008,"Latex, rubber — Determination of total solids content — Amendment 2: Determination at temperatures higher than 105 degrees C",Latex de caoutchouc — Détermination des matières solides totales — Amendement 2: Détermination à des températures supérieures à 105 degrés C,2008-01-07,4,['83.040.10'],ISO/TC 45/SC 3,9599,,[51088],"['en','fr']",4,