Withdrawn and superseded ISO standards — page 28 of 246

21025,IS,,ISO 12126:1997,Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread — Product grades A and B,"Écrous hexagonaux à embase, autofreinés, tout métal, à filetage métrique à pas fin — Grades A et B",1997-10-30,1,['21.060.20'],ISO/TC 2/SC 12,9599,,[61529],"['en','fr']",5,

45865,IS,,ISO 12127-1:2007,Clothing for protection against heat and flame — Determination of contact heat transmission through protective clothing or constituent materials — Part 1: Test method using contact heat produced by heating cylinder,Vêtements de protection contre la chaleur et la flamme — Détermination de la transmission thermique par contact à travers les vêtements de protection ou leurs matériaux constitutifs — Partie 1: Méthode d'essai utilisant la transmission thermique par contact produite par un cylindre de chauffage,2007-11-15,1,['13.340.10'],ISO/TC 94/SC 13,9599,[2500],[57456],"['en','fr']",6,<p>ISO 12127-1:2007 specifies a test method for the determination of contact heat t

2500,IS,,ISO 12127:1996,Clothing for protection against heat and flame — Determination of contact heat transmission through protective clothing or constituent materials,Vêtements de protection contre la chaleur et la flamme — Détermination de la transmission thermique par contact à travers les vêtements de protection ou leurs matériaux constitutifs,1996-02-15,1,['13.340.10'],ISO/TC 94/SC 13,9599,,[45865],"['en','fr']",5,<p>Gives a test method for the determination of contact heat transmission. Applies to protective clothing including protective gloves intended to protect against high contact temperatures. Scope of application is restricted to contact temperatures between 100 °C and 500 °C.</

20995,IS,,ISO 12128:1995,"Plain bearings — Lubrication holes, grooves and pockets — Dimensions, types, designation and their application to bearing bushes","Paliers lisses — Trous, rainures et poches de graissage — Dimensions, types, désignation et leurs applications dans les bagues",1995-03-23,1,['21.100.10'],ISO/TC 123/SC 3,9599,,[34774],"['en','fr']",8,"<p>Specifies dimensions for lubrication holes, grooves and pockets for bearing bushes. Enables the user to assign the different types of lubricant feed and distribution to plain bearing bushes made of copper alloys, thermosetting plastics, thermoplastics or of artificial carbon.</p>"

34774,IS,,ISO 12128:2001,"Plain bearings — Lubrication holes, grooves and pockets — Dimensions, types, designation and their application to bearing bushes","Paliers lisses — Trous, rainures et poches de graissage — Dimensions, types, désignation et leurs applications dans les bagues",2001-09-20,2,['21.100.10'],ISO/TC 123/SC 3,9599,[20995],[76398],"['en','fr']",8,"<p>This International Standard specifies dimensions for lubrication holes, grooves and pockets for bearing bushes.</p><p>These dimensions can be entered, e.g. on drawings, using the designation examples. Their use depends in</p><p>particular on the specific operating conditions.</p><p>In addition, it enables the user to assign the d

20996,IS,,ISO 12129-1:1995,Plain bearings — Part 1: Fits,Paliers lisses — Partie 1: Ajustements,1995-03-30,1,['21.100.10'],ISO/TC 123/SC 3,9599,,[75926],"['en','fr']",4,"<p>Specifies a system of fits applicable to metallic plain bearings used in general engineering. Not applicable to half-bearings and bushes which are not measured by diameter but by wall thickness, and which are dimensionally changed by assembly. Applicable preferably to rotating machine parts and shafting, but it may be used similarly in other ranges of application.</p>"

75926,IS,,ISO 12129-1:2019,Plain bearings — Tolerances — Part 1: Fits,Paliers lisses — Tolérances — Partie 1: Ajustements,2019-03-20,2,['21.100.10'],ISO/TC 123/SC 3,9599,[20996],[86706],['en'],10,"<p>This document specifies a system of fits applicable to metallic plain bearings used in general engineering for mean relative bearing clearances, <i>ψm</i>, of 0,56 ? up to 3,15 ?. Other clearance ranges can be used depending upon the requirements in specific applications.</p><p>This system of fits is not applicable to half‑bearings and bushes which, due to their special characteristics, are not measured by diameter but by wall thickness, and which are dimensionally changed on assembly. It is not

21337,IS,,ISO 12129-2:1995,"Plain bearings — Part 2: Tolerances on form and position and surface roughness for shafts, flanges and thrust collars","Paliers lisses — Partie 2: Tolérances de forme et de position et rugosité de surface des arbres, collerettes et collets de butée",1995-03-30,1,['21.100.10'],ISO/TC 123/SC 3,9599,,[75927],"['en','fr']",3,"<p>Specifies tolerances on form and position as well as the surface roughness of shafts, flanges and thrust collars as used in plain bearing units. Applicable to journal or thrust plain bearing units or to a combination of both, installed either horizontally or vertically. Not applicable to crankshaft bearing units in combustion engines.</p>" 213

5813,IS,,ISO 1213-1:1982,Solid mineral fuels — Vocabulary — Part 1: Terms relating to coal preparation,Combustibles minéraux solides — Vocabulaire — Partie 1: Termes relatifs à la préparation du charbon,1982-11-01,1,"['73.040','01.040.73']",ISO/TC 27/SC 1,9599,,[5814],"['en','fr']",18,

5814,IS,,ISO 1213-1:1993,Solid mineral fuels — Vocabulary — Part 1: Terms relating to coal preparation,Combustibles minéraux solides — Vocabulaire — Partie 1: Termes relatifs à la préparation du charbon,1993-12-02,2,"['73.040','01.040.73']",ISO/TC 27/SC 1,9599,[5813],[75888],"['en','fr']",20,"<p>Defines, in English, 420 terms commonly employed in coal preparation under the following headlines: general terms, sizing, cleaning, separation of solids from water or air, size reduction, expression of results, blending and homogenization, automatic control.</p>"

5817,IS,,ISO 1213-2:1992,"Solid mineral fuels — Vocabulary — Part 2: Terms relating to sampling, testing and analysis","Combustibles minéraux solides — Vocabulaire — Partie 2: Termes relatifs à l'échantillonnage, l'essai et l'analyse",1992-04-02,1,"['73.040','75.160.10','01.040.75','01.040.73']",ISO/TC 27,9599,"[5819,5816]","[50472,61543]","['en','fr']",13,"<p>Defines 205 terms commonly employed in this field. Alternative names are given for several terms: in some cases, however, the use of the alternative name is deprecated (as indicated).</p>"

61543,IS,,ISO 1213-2:2016,"Solid mineral fuels — Vocabulary — Part 2: Terms relating to sampling, testing and analysis","Combustibles minéraux solides — Vocabulaire — Partie 2: Termes relatifs à l'échantillonnage, l'essai et l'analyse",2016-12-06,2,"['73.040','75.160.10','01.040.75','01.040.73']",ISO/TC 27/SC 1,9599,[5817],[87990],['en'],35,"<p>ISO 1213-2:2016 defines terms commonly employed in the sampling, testing and analysis of solid mineral fuels.</p><p>Alternative names are given for several terms. In some cases, however, the use of the alternative name is deprecated (as indicated).</p><p>An alphabetical index, with numerical cross reference is provided.</p>"

35256,IS,,ISO 12130-1:2001,Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 1: Calculation of tilting pad thrust bearings,Paliers lisses — Butées hydrodynamiques à patins oscillants fonctionnant en régime stationnaire — Partie 1: Calcul des butées à patins oscillants,2001-11-15,1,['21.100.10'],ISO/TC 123/SC 8,9599,,[77159],"['en','fr']",24,"<p>The aim of ISO 12130 is to achieve designs of plain bearings that are reliable in operation by the application of a</p><p>calculation method for oil-lubricated hydrodynamic plain bearings with complete separation of the thrust collar and</p><p>plain bearing surfaces by a film of lubricant.</p><p>This

26865,IS,,ISO 12130-2:2001,Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 2: Functions for calculation of tilting pad thrust bearings,Paliers lisses — Butées hydrodynamiques à patins oscillants fonctionnant en régime stationnaire — Partie 2: Fonctions pour le calcul des butées à patins oscillants,2001-11-15,1,['21.100.10'],ISO/TC 123,9599,,[63680],"['en','fr']",12,

63680,IS,,ISO 12130-2:2013,Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 2: Functions for calculation of tilting pad thrust bearings,Paliers lisses — Butées hydrodynamiques à patins oscillants fonctionnant en régime stationnaire — Partie 2: Fonctions pour le calcul des butées à patins oscillants,2013-09-19,2,['21.100.10'],ISO/TC 123/SC 8,9599,[26865],[78556],['en'],12,<p>ISO 12130-2:2013 specifies the derivation of mathematical functions to be applied when calculating tilting pad thrust bearings.</p>

26866,IS,,ISO 12130-3:2001,Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 3: Guide values for the calculation of tilting pad thrust bearings,Paliers lisses — Butées hydrodynamiques à patins oscillants fonctionnant en régime stationnaire — Partie 3: Paramètres opérationnels admissibles pour le calcul des butées à patins oscillants,2001-11-15,1,['21.100.10'],ISO/TC 123/SC 8,9599,,[77160],"['en','fr']",6,

20999,IS,,ISO 12131-1:2001,Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 1: Calculation of thrust pad bearings,Paliers lisses — Butées hydrodynamiques à patins géométrie fixe fonctionnant en régime stationnaire — Partie 1: Calcul des butées à segments,2001-04-25,1,['21.100.10'],ISO/TC 123/SC 8,9599,,[77161],"['en','fr']",25,"<p>The aim of this part of ISO 12131 is to achieve designs of plain bearings that are reliable in operation, by the</p><p>application of a calculation method for oil-lubricated hydrodynamic plain bearings with complete separation of the</p><p>thrust collar and plain bearing surfaces by a film of lubricant [1].</p><p>This par

26867,IS,,ISO 12131-2:2001,Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 2: Functions for the calculation of thrust pad bearings,Paliers lisses — Butées hydrodynamiques à patins géométrie fixe fonctionnant en régime stationnaire — Partie 2: Fonctions pour le calcul des butées à segments,2001-05-10,1,['21.100.10'],ISO/TC 123,9599,,[70385],"['en','fr']",11,

70385,IS,,ISO 12131-2:2016,Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 2: Functions for the calculation of thrust pad bearings,Paliers lisses — Butées hydrodynamiques à patins géométrie fixe fonctionnant en régime stationnaire — Partie 2: Fonctions pour le calcul des butées à segments,2016-09-16,2,['21.100.10'],ISO/TC 123/SC 8,9599,[26867],[84514],['en'],10,<p>ISO 12131-2:2016 specifies functions for thrust pad bearings. It also covers the effect of dynamic viscosity on lubricant film temperature.</p>

26868,IS,,ISO 12131-3:2001,Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 3: Guide values for the calculation of thrust pad bearings,Paliers lisses — Butées hydrodynamiques à patins géométrie fixe fonctionnant en régime stationnaire — Partie 3: Paramètres opérationnels admissibles pour le calcul des butées à segments,2001-04-19,1,['21.100.10'],ISO/TC 123/SC 8,9599,,[77162],"['en','fr']",5,<p>This part of ISO 12131 specifies guide values for avoiding damage to thrust-pad bearings in service.</p><p>The explanation of the symbols as well as examples for calculation are given in ISO 12131-1.</p>

20998,IS,,ISO 12132:1999,Plain bearings — Quality assurance of thin- walled half bearings — Design FMEA,Paliers lisses — Assurance qualité des demi-coussinets minces — AMDE à la conception,1999-10-07,1,['21.100.10'],ISO/TC 123/SC 5,9599,,[68623],"['en','fr']",7,

51225,IS,,ISO 12133:2011,Small craft — Carbon monoxide (CO) detection systems,Petits navires — Systèmes de détection de monoxyde de carbone (CO),2011-12-06,1,['47.080'],ISO/TC 188,9599,,[78243],"['en','fr']",15,"<p>ISO 12133:2011 specifies requirements for the design, construction and installation of carbon monoxide detection and alarm systems in small craft. It also provides educational material about carbon monoxide relative to boats and boating.</p>"

35554,IS,,ISO 12135:2002,Metallic materials — Unified method of test for the determination of quasistatic fracture toughness,Matériaux métalliques — Méthode unifiée d'essai pour la détermination de la ténacité quasi statique,2002-12-06,1,['77.040.10'],ISO/TC 164/SC 4,9599,,[60891],"['en','fr']",94,"<p>International Standard ISO 12135 specifies methods for determining fracture toughness in terms of <i>K</i>, δ, <i>J</i> and <i>R</i>-curves for homogeneous metallic materials subjected to quasistatic loading. Specimens are notched, precracked by fatigue and tested under slowly increasing displacement.</p>"

51353,IS,Cor,ISO 12135:2002/Cor 1:2008,Metallic materials — Unified method of test for the determination of quasistatic fracture toughness — Technical Corrigendum 1,Matériaux métalliques — Méthode unifiée d'essai pour la détermination de la ténacité quasi statique — Rectificatif technique 1,2008-05-28,1,['77.040.10'],ISO/TC 164/SC 4,9599,,[60891],"['en','fr']",7,

60891,IS,,ISO 12135:2016,Metallic materials — Unified method of test for the determination of quasistatic fracture toughness,Matériaux métalliques — Méthode unifiée d'essai pour la détermination de la ténacité quasi statique,2016-11-09,2,['77.040.10'],ISO/TC 164/SC 4,9599,"[51353,35554]",[78208],['en'],98,"<p>ISO 12135:2016 specifies methods for determining fracture toughness in terms of K, δ, J and R-curves for homogeneous metallic materials subjected to quasistatic loading. Specimens are notched, precracked by fatigue and tested under slowly increasing displacement. The fracture toughness is determined for individual specimens at or after the onset of ductile crack extension or at the onse

20462,IS,,ISO 12137-1:1997,Paints and varnishes — Determination of mar resistance — Part 1: Method using a curved stylus,Peintures et vernis — Détermination de la résistance à la détérioration — Partie 1: Méthode utilisant un stylet arrondi,1997-02-13,1,['87.040'],ISO/TC 35/SC 9,9599,,"[50488,59595]","['en','fr']",8,"<p>Deals with the sampling and testing of paints, varnishes and related products. Contains a method for the determination of the mar resistance of a single coating or the upper layer of a multicoat system, using a curved (ring-shaped) stylus. Applicable to the comparison of the mar resistance of different coatings.</p>"

31309,IS,Cor,ISO 12137-1:1997/Cor 1:1998,Paints and varnishes — Determination of mar resistance — Part 1: Method using a curved stylus — Technical Corrigendum 1,Peintures et vernis — Détermination de la résistance à la détérioration — Partie 1: Méthode utilisant un stylet arrondi — Rectificatif technique 1,1998-12-20,1,['87.040'],ISO/TC 35/SC 9,9599,,"[50488,59595]","['en','fr']",1,

23681,IS,,ISO 12137-2:1997,Paints and varnishes — Determination of mar resistance — Part 2: Method using a pointed stylus,Peintures et vernis — Détermination de la résistance à la détérioration — Partie 2: Méthode utilisant un stylet pointu,1997-02-13,1,['87.040'],ISO/TC 35/SC 9,9599,,"[50489,59596]","['en','fr']",8,"<p>Deals with the sampling and testing of paints, varnishes and related products. Contains a method for the determination of the mar resistance of a single coating or the upper layer of a multicoat system, using a pointed stylus. Applicable to the comparison of the mar resistance of different coatings.</p>"

21012,IS,,ISO 12138:1996,Textiles — Domestic laundering procedures for textile fabrics prior to flammability testing,Textiles — Méthodes de lavage domestique des étoffes en vue des essais d'inflammabilité,1996-12-19,1,"['59.080.30','13.220.40']",ISO/TC 38/SC 2,9599,,[65147],"['en','fr']",7,<p>Describes domestic laundering procedures for repeated washing at selected wash temperatures prior to assessing flammability behaviour of textiles. The washing machines and procedures specified are based on ISO 6330.</p>

1644,IS,,ISO 12140:1998,Agricultural machinery — Agricultural trailers and trailed equipment — Drawbar jacks,Matériel agricole — Remorques agricoles et matériel traîné — Béquilles d'attelage,1998-12-17,1,['65.060.01'],ISO/TC 23/SC 3,9599,,[56210],"['en','fr']",4,

56210,IS,,ISO 12140:2013,Agricultural machinery — Agricultural trailers and trailed equipment — Drawbar jacks,Matériel agricole — Remorques agricoles et matériel traîné — Béquilles d'attelage,2013-07-22,2,['65.060.01'],ISO/TC 23/SC 3,9599,[1644],[75896],"['en','fr']",11,"<p>ISO 12140:2013 specifies terms and definitions, establishes test procedures, and creates minimum performance requirements for telescopic mechanical screw-type jacks or hydraulic jacks mounted on agricultural implements as original equipment and/or replacement jacks.</p><p>Furthermore, ISO 12140:2013 defines terms, establishes test procedures, and creates minimum acceptance criteria for the use of telescopic mechanical scr

21011,IS,,ISO 12141:2002,Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method,Émissions de sources fixes — Détermination d'une faible concentration en masse de matières particulaires (poussières) — Méthode gravimétrique manuelle,2002-11-05,1,['13.040.40'],ISO/TC 146/SC 1,9599,,[85643],"['en','fr']",40,"<p>ISO 12141:2002 describes a reference method for the measurement of low dust content in ducted gaseous streams at concentrations below 50 mg/m³under standard conditions. This method has been validated with special emphasis on the region around 5 mg/m³.</p><p>ISO 12141:2002 has b

21041,IS,,ISO 12145:1998,Resistance welding equipment — Angles for mounting spot welding electrodes,Équipement de soudage par résistance — Angles utilisés pour le montage d'électrodes de soudage par résistance par points,1998-08-13,1,['25.160.30'],ISO/TC 44/SC 6,9599,,[54931],"['en','fr']",3,

5822,IS,,ISO 1215:1980,"Commercially dry virgin cork, ramassage, gleanings, corkwood refuse and corkwaste — Definitions and packaging","Liège mâle, liège de ramassage, liège gisant, rebuts et déchets commercialement secs — Définitions et emballage",1980-06-01,1,['79.100'],ISO/TC 87,9599,,[5823],"['en','fr']",1,

5823,IS,,ISO 1215:1986,"Commercially dry virgin cork, ramassage, gleanings, corkwood refuse and corkwaste — Definitions and packaging","Liège mâle, liège de ramassage, liège gisant, rebuts et déchets commercialement secs — Définitions et emballage",1986-05-22,2,['79.100'],ISO/TC 87,9599,[5822],[65024],"['en','fr']",1,<p>Applies to material defined in ISO 633 the moisture content of which is not higher than 14 % as determined in accordance with ISO 2386. Gross mass of bales is the size of commercially dry cork including packaging. The type of cork and the name of the exporting country shall be indicated on the bales.</p>

21026,IS,,ISO 12151-1:1999,Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends,Raccordements pour transmissions hydrauliques et applications générales — Flexibles de raccordement — Partie 1: Flexibles avec embouts à joints faciaux toriques conformes à l'ISO 8434-3,1999-06-24,1,"['23.100.40','23.040.70']",ISO/TC 131/SC 4,9599,,[41895],"['en','fr']",12,

34963,IS,,ISO 12151-2:2003,Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings,Raccordements pour transmissions hydrauliques et applications générales — Flexibles de raccordement — Partie 2: Flexibles avec embouts à cône à 24 degrés et joints toriques conformes à l'ISO 8434-1 et à l'ISO 8434-4,2003-05-20,1,"['23.100.40','23.040.70']",ISO/TC 131/SC 4,9599,,[82505],"['en','fr']",13,"<p>ISO 12151-2:2003 specifies the general and dimensional requirements for the design and performance of hose fittings with 24° cone connector ends with O-rings, in accordance with ISO 8434-1 and ISO

24694,IS,,ISO 12151-3:1999,Connections for hydraulic fluid power and general use — Hose fittings — Part 3: Hose fittings with ISO 6162 flange ends,Raccordements pour transmissions hydrauliques et applications générales — Flexibles de raccordement — Partie 3: Flexibles avec brides conformes à l'ISO 6162,1999-04-29,1,"['23.100.40','23.040.70']",ISO/TC 131/SC 4,9599,,[41896],"['en','fr']",12,

41896,IS,,ISO 12151-3:2010,Connections for hydraulic fluid power and general use — Hose fittings — Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends,Raccordements pour transmissions hydrauliques et applications générales — Raccords de flexible — Partie 3: Raccords de flexible avec brides conformes à l'ISO 6162-1 ou à l'ISO 6162-2,2010-06-07,2,"['23.100.40','23.040.70']",ISO/TC 131/SC 4,9599,[24694],[79705],"['en','fr']",12,"<p>ISO 12151-3:2010 specifies the general and dimensional requirements for the design and performance of flange hose fittings, made of carbon steel, for nominal hose inside diameters of 12,5 mm to 51 mm inclusive, in accordance with ISO 4397, for use with po

51250,IS,,ISO 12153:2011,Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys — Classification,Produits consommables pour le soudage — Fils-électrodes fourrés pour soudage à l'arc avec ou sans gaz de protection du nickel et des alliages de nickel — Classification,2011-04-13,1,['25.160.20'],ISO/TC 44/SC 3,9599,,[83115],"['en','fr','ru']",9,<p>ISO 12153:2011 specifies requirements for the classification of tubular cored electrodes for metal arc welding with or without a gas shield of nickel and nickel alloys. It includes those compositions in which the nickel content exceeds that of any other element.</p>

20647,IS,,ISO 12156-1:1997,Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method,Carburant diesel — Évaluation du pouvoir lubrifiant au banc alternatif à haute fréquence — Partie 1: Méthode d'essai,1997-12-11,1,['75.160.20'],ISO/TC 22,9599,,[39783],"['en','fr']",11,

30384,IS,Cor,ISO 12156-1:1997/Cor 1:1998,Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method — Technical Corrigendum 1,Carburant diesel — Évaluation du pouvoir lubrifiant au banc alternatif à haute fréquence — Partie 1: Méthode d'essai — Rectificatif technique 1,1998-07-16,1,['75.160.20'],ISO/TC 22,9599,,[39783],['en'],1,

39783,IS,,ISO 12156-1:2006,Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method,Carburant diesel — Évaluation du pouvoir lubrifiant au banc alternatif à haute fréquence (HFRR) — Partie 1: Méthode d'essai,2006-09-27,2,['75.160.20'],ISO/TC 22/SC 34,9599,"[20647,30384]",[65227],"['en','fr']",12,"<p>ISO 12156-1:2006 specifies a test method using the high-frequency reciprocating rig (HFRR), for assessing the lubricating property of diesel fuels, including those fuels which may contain a lubricity-enhancing additive.</p><p>It applies to fuels used in diesel engines.</p>"

65227,IS,,ISO 12156-1:2016,Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method,Carburant diesel — Évaluation du pouvoir lubrifiant au banc alternatif à haute fréquence (HFRR) — Partie 1: Méthode d'essai,2016-02-17,3,['75.160.20'],ISO/TC 22/SC 34,9599,[39783],[72481],"['en','fr']",15,"<p>ISO 12156-1:2016 specifies a test method using the high-frequency reciprocating rig (HFRR), for assessing the lubricating property of diesel fuels, including those fuels which may contain a lubricity-enhancing additive. It defines two methods for measurement of the wear scar; Method 'A' ? Digital camera, and Method 'B' ? Visual observation.</p><p>This

72481,IS,,ISO 12156-1:2018,Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method,Carburant diesel — Évaluation du pouvoir lubrifiant au banc alternatif à haute fréquence (HFRR) — Partie 1: Méthode d'essai,2018-10-19,4,['75.160.20'],ISO/TC 28,9599,[65227],[85698],"['en','fr']",14,"<p>This document specifies a test method using the high-frequency reciprocating rig (HFRR), for assessing the lubricating property of diesel fuels, including those fuels which could contain a lubricity-enhancing additive. It defines two methods for measurement of the wear scar; Method 'A' — Digital camera, and Method 'B' — Visual observation.</p><p>This test me

25891,IS,,ISO 12156-2:1998,Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 2: Limit,Carburant diesel — Évaluation du pouvoir lubrifiant au banc alternatif à haute fréquence — Partie 2: Limite,1998-09-24,1,['75.160.20'],ISO/TC 22,9599,,[39784],"['en','fr']",2,

39784,IS,,ISO 12156-2:2007,Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 2: Limit,Carburant diesel — Évaluation du pouvoir lubrifiant au banc alternatif à haute fréquence (HFRR) — Partie 2: Limite,2007-01-10,2,['75.160.20'],ISO/TC 22/SC 34,9599,[25891],[70277],['en'],1,<p>ISO 12156-2:2006 specifies the performance requirement (limit) necessary to ensure reliable operation of diesel fuel injection equipment with respect to lubrication by fuel of such equipment.</p><p>It applies to fuels used in diesel engines.</p>

5824,IS,,ISO 1216:1979,"Commercially dry corkwood in planks — Definitions, classification and packaging","Liège en planches commercialement sec — Définitions, classification et emballage",1979-12-01,1,['79.100'],ISO/TC 87,9599,,[5825],['en'],2,

5825,IS,,ISO 1216:1990,"Corkwood in planks — Grading, classification and packing","Liège en planches — Calibrage, classification et emballage",1990-11-15,2,['79.100'],ISO/TC 87,9599,[5824],[27299],"['en','fr']",2,

27299,IS,,ISO 1216:1998,"Corkwood in planks — Grading, classification and packing","Liège en planches — Calibrage, classification et emballage",1998-12-20,3,['79.100'],ISO/TC 87,9599,[5825],[67768],"['en','fr']",3,

21062,IS,,ISO 12162:1995,Thermoplastics materials for pipes and fittings for pressure applications — Classification and designation — Overall service (design) coefficient,Matières thermoplastiques pour tubes et raccords pour applications avec pression — Classification et désignation — Coefficient global de service (de calcul),1995-06-01,1,"['23.040.45','23.040.20']",ISO/TC 138/SC 5,9599,[9762],"[38804,43865]","['en','fr']",3,<p>Establishes the classification of thermoplastics materials in pipe form and specifies the material designation. Also gives a method for calculating the design stress. Applies to materials intended for pipes and/or fittings for pressure applications.</p>

21058,IS,,ISO 12163:1999,Dental baseplate/modelling wax,Cires dentaires à modeler,1999-05-13,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[37635],"['en','fr']",9,

33040,IS,,ISO 12164-1:2001,Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions,Interfaces à cône creux-face — Partie 1: Queues — Dimensions,2001-12-20,1,['25.060.20'],ISO/TC 29/SC 9,9599,,"[77916,72710]","['en','fr']",12,

30047,IS,,ISO 12164-2:2001,Hollow taper interface with flange contact surface — Part 2: Receivers — Dimensions,Interfaces à cône creux-face — Partie 2: Nez de broche — Dimensions,2001-12-20,1,['25.060.20'],ISO/TC 29/SC 9,9599,,[77917],"['en','fr']",6,

41999,IS,,ISO 12164-3:2008,Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools,Interfaces à cône creux-face — Partie 3: Dimensions des queues pour outils non rotatifs,2008-11-11,1,['25.060.20'],ISO/TC 29,9599,,[60399],"['en','fr']",10,"<p>ISO 12164-3:2008 specifies dimensions for hollow taper shanks with flange contact surface (HSK) to be applied to machine tools (e.g. turning machines, turning-mill machines). A range of shank sizes is given. </p><p>ISO 12164-3:2008 specifies the shank of type T, which incorporates a grooved flange to enable automatic tool exchange. The tools may also be exchanged manually via a hole in the shank taper. The

60399,IS,,ISO 12164-3:2014,Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools,Interfaces à cône creux-face — Partie 3: Dimensions des queues pour outils non rotatifs,2014-12-08,2,['25.060.20'],ISO/TC 29/SC 9,9599,[41999],[77918],"['en','fr']",10,"<p>ISO 12164-3:2014 specifies dimensions for hollow taper shanks with flange contact surface (HSK) to be applied to machine tools (e.g. turning machines, turning-mill machines). A range of shank sizes is specified.</p><p>Specified is the shank of type T. It incorporates a grooved flange to enable automatic tool exchange. The tools can also be exchanged manually via a hole in the shank taper.</p><p>

42001,IS,,ISO 12164-4:2008,Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools,Interfaces à cône creux-face — Partie 4: Dimensions des nez de broches pour outils non rotatifs,2008-11-11,1,['25.060.20'],ISO/TC 29,9599,,[60400],"['en','fr']",6,"<p>ISO 12164-4:2008 specifies dimensions for receivers with taper and flange contact surfaces for hollow taper shanks in accordance with ISO 12164-3 to be applied to machine tools (e.g. turning machines, turning-mill machines). A range of sizes is given. </p><p>ISO 12164-4:2008 specifies the receiver of type T. It is for automatic tool exchange and manual clamping, which is achieved via holes in both

60400,IS,,ISO 12164-4:2014,Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools,Interfaces à cône creux-face — Partie 4: Dimensions des nez de broches pour outils non rotatifs,2014-12-08,2,['25.060.20'],ISO/TC 29/SC 9,9599,[42001],[77919],"['en','fr']",6,"<p>ISO 12164-4:2014 specifies dimensions for receivers with taper and flange contact surfaces for hollow taper shanks in accordance with ISO 12164-3 to be applied to machine tools (e.g. turning machines, turning-mill machines). A range of sizes is specified.</p><p>ISO 12164-4:2014 specifies the receiver of type T. It is for automatic tool exchange and manual clamping, which is achieved vi

21059,IS,,ISO 12165:2000,Tools for moulding — Components of compression and injection moulds and diecasting dies — Terms and symbols,"Outillage de moulage — Composants des moulages par compression, moules d'injection et moules pour fonderie sous pression — Termes et symboles",2000-08-17,1,"['25.120.30','01.040.25']",ISO/TC 29/SC 8,9599,,[75669],"['en','fr']",36,

35257,IS,,ISO 12167-1:2001,Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves,Paliers lisses — Paliers lisses radiaux hydrostatiques avec rainures d'écoulement fonctionnant en régime stationnaire — Partie 1: Calcul pour la lubrification des paliers lisses radiaux avec rainures d'écoulement,2001-12-13,1,['21.100.10'],ISO/TC 123,9599,,[70384],"['en','fr']",31,

70384,IS,,ISO 12167-1:2016,Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves,Paliers lisses — Paliers lisses radiaux hydrostatiques avec rainures d'écoulement fonctionnant en régime stationnaire — Partie 1: Calcul pour la lubrification des paliers lisses radiaux avec rainures d'écoulement,2016-09-19,2,['21.100.10'],ISO/TC 123/SC 8,9599,[35257],[84515],['en'],32,"<p>ISO 12167-1:2016 applies to hydrostatic plain journal bearings under steady-state conditions.</p><p>In ISO 12167-1:2016, only bearings with oil drainage grooves between the recesses are taken i

26869,IS,,ISO 12167-2:2001,Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves,Paliers lisses — Paliers lisses radiaux hydrostatiques avec rainures d'écoulement fonctionnant en régime stationnaire — Partie 2: Caractéristiques du calcul pour la lubrification des paliers lisses radiaux avec rainures d'écoulement,2001-12-06,1,['21.100.10'],ISO/TC 123/SC 8,9599,,"[80941,77163]","['en','fr']",9,"<p>This part of ISO 12167 lists, in graphic form, characteristic values used in the calculation of oil-lubricated plain</p><p>journal beari

35258,IS,,ISO 12168-1:2001,Plain bearings — Hydrostatic plain journal bearings without drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves,Paliers lisses — Paliers lisses radiaux hydrostatiques sans rainure d'écoulement fonctionnant en régime stationnaire — Partie 1: Calcul pour la lubrification des paliers lisses radiaux sans rainure d'écoulement,2001-12-20,1,['21.100.10'],ISO/TC 123/SC 8,9599,,[77164],"['en','fr']",31,

26870,IS,,ISO 12168-2:2001,Plain bearings — Hydrostatic plain journal bearings without drainage grooves under steady-state conditions — Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves,Paliers lisses — Paliers lisses radiaux hydrostatiques sans rainure d'écoulement fonctionnant en régime stationnaire — Partie 2: Caractéristiques du calcul pour la lubrification des paliers lisses radiaux sans rainure d'écoulement,2001-12-20,1,['21.100.10'],ISO/TC 123/SC 8,9599,,[77165],"['en','fr']",13,

5826,IS,,ISO 1217:1975,Displacement compressors — Acceptance tests,Compresseurs volumétriques — Essais de réception,1975-04-01,1,['23.140'],ISO/TC 118,9599,,[5827],"['en','fr']",84,

5828,IS,Amd,ISO 1217:1975/Amd 1:1988,Displacement compressors — Acceptance tests — Amendment 1,Compresseurs volumétriques — Essais de réception — Amendement 1,1988-06-23,1,['23.140'],ISO/TC 118,9599,,[5827],['en'],1,

5827,IS,,ISO 1217:1986,Displacement compressors — Acceptance tests,Compresseurs volumétriques — Essais de réception,1986-07-31,2,['23.140'],ISO/TC 118,9599,"[5826,5828]",[23682],"['en','fr']",59,

23682,IS,,ISO 1217:1996,Displacement compressors — Acceptance tests,Compresseurs volumétriques — Essais de réception,1996-09-26,3,['23.140'],ISO/TC 118/SC 6,9599,[5827],[44769],"['en','fr']",58,

21114,IS,,ISO 12171:1998,Space data and information transfer systems — Telecommand — Channel service — Architectural specification,Systèmes de transfert des informations et données spatiales — Télécommande — Service codage et liaison physique — Spécification architecturale,1998-07-30,1,['49.140'],ISO/TC 20/SC 13,9599,,[34711],"['en','fr']",46,

21115,IS,,ISO 12172:1998,Space data and information transfer systems — Telecommand — Data routing service,Systèmes de transfert des informations et données spatiales — Télécommande — Service acheminement des données,1998-09-17,1,['49.140'],ISO/TC 20/SC 13,9599,,[36591],"['en','fr']",58,

21116,IS,,ISO 12173:1998,Space data and information transfer systems — Telecommand — Command operation procedures,Systèmes de transfert des informations et données spatiales — Télécommande — Procédures pour les opérations de télécommande,1998-08-06,1,['49.140'],ISO/TC 20/SC 13,9599,,[36447],"['en','fr']",57,

21117,IS,,ISO 12174:1998,Space data and information transfer systems — Telecommand — Data management service — Architectural specification,Systèmes de transfert des informations et données spatiales — Télécommande — Service gestion des données — Définition architecturale,1998-07-23,1,['49.140'],ISO/TC 20/SC 13,9599,,[36446],"['en','fr']",39,

21102,IS,,ISO 12176-1:1998,Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion,Tubes et raccords en matières plastiques — Appareillage pour l'assemblage par soudage des systèmes en polyéthylène — Partie 1: Soudage bout à bout,1998-06-18,1,"['23.040.45','23.040.20','75.200']",ISO/TC 138/SC 4,9599,,[40982],"['en','fr']",15,

40982,IS,,ISO 12176-1:2006,Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion,Tubes et raccords en matières plastiques — Appareillage pour l'assemblage par soudage des systèmes en polyéthylène — Partie 1: Soudage bout à bout,2006-07-04,2,"['23.040.45','23.040.20','75.200']",ISO/TC 138/SC 4,9599,[21102],[56547],"['en','fr']",21,"<p>ISO 12176-1:2006 specifies the general characteristics of, and performance requirements for, equipment for butt fusion jointing of polyethylene (PE) piping systems using electric heaters. It is applicable to mechanical and pressure-activated equipment for butt fusion jointing PE pipes and fittings either intended

56547,IS,,ISO 12176-1:2012,Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion,Tubes et raccords en matières plastiques — Appareillage pour l'assemblage par soudage des systèmes en polyéthylène — Partie 1: Soudage bout à bout,2012-10-01,3,"['23.040.45','23.040.20','75.200']",ISO/TC 138/SC 4,9599,[40982],[67803],"['en','fr']",20,

21103,IS,,ISO 12176-2:2000,Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion,Tubes et raccords en matières plastiques — Appareillage pour l'assemblage par soudage des systèmes en polyéthylène — Partie 2: Électrosoudage,2000-05-11,1,"['23.040.45','23.040.20','75.200']",ISO/TC 138/SC 4,9599,,[46114],"['en','fr']",18,

46114,IS,,ISO 12176-2:2008,Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion,Tubes et raccords en matières plastiques — Appareillage pour l'assemblage par soudage des systèmes en polyéthylène — Partie 2: Électrosoudage,2008-06-03,2,"['23.040.45','23.040.20','75.200']",ISO/TC 138/SC 4,9599,[21103],[85939],"['en','fr']",19,"<p>ISO 12176-2:2008 specifies performance requirements for electrofusion control units for use with polyethylene (PE) electrofusion fittings for the supply of gaseous fuels or for the conveyance of water for human consumption, including raw water prior to treatment and for the conveyance of water for general purpose or

79720,IS,Amd,ISO 12176-2:2008/Amd 1:2021,Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion — Amendment 1,Tubes et raccords en matières plastiques — Appareillage pour l'assemblage par soudage des systèmes en polyéthylène — Partie 2: Électrosoudage — Amendement 1,2021-04-16,2,"['23.040.45','23.040.20','75.200']",ISO/TC 138/SC 4,9599,,[85939],['en'],2,

27201,IS,,ISO 12176-3:2001,Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge,Tubes et raccords en matières plastiques — Appareillage pour l'assemblage par soudage des systèmes en polyéthylène — Partie 3: Carte d'identification de l'opérateur,2001-02-15,1,"['23.040.45','35.240.15','23.040.20','75.200']",ISO/TC 138/SC 4,9599,,[41791],"['en','fr']",6,

41791,IS,,ISO 12176-3:2006,Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge,Tubes et raccords en matières plastiques — Appareillage pour l'assemblage par soudage des systèmes en polyéthylène — Partie 3: Carte d'identification de l'opérateur,2006-04-20,2,"['23.040.45','35.240.15','23.040.20','75.200']",ISO/TC 138/SC 4,9599,[27201],[57269],"['en','fr']",8,"<p>ISO 12176-3:2006 describes the format and the contents of a fusion operator's badge, which is used during the construction of polyethylene (PE) piping systems for the supply of gaseous fuels or water to identify the fusion operator and to activate or deactivate the fusion-jointing

21119,IS,,ISO 12179:2000,Geometrical Product Specifications (GPS) — Surface texture: Profile method — Calibration of contact (stylus) instruments,Spécification géométrique des produits (GPS) — État de surface: Méthode du profil — Étalonnage des instruments à contact (palpeur),2000-03-23,1,['17.040.30'],ISO/TC 213,9599,,[72758],"['en','fr']",17,

39419,IS,Cor,ISO 12179:2000/Cor 1:2003,Geometrical Product Specifications (GPS) — Surface texture: Profile method — Calibration of contact (stylus) instruments — Technical Corrigendum 1,Spécification géométrique des produits (GPS) — État de surface: Méthode du profil — Étalonnage des instruments à contact (palpeur) — Rectificatif technique 1,2003-11-19,1,['17.040.30'],ISO/TC 213,9599,,[72758],"['en','fr']",1,

72758,IS,,ISO 12179:2021,Geometrical product specifications (GPS) — Surface texture: Profile method — Calibration of contact (stylus) instruments,Spécification géométrique des produits (GPS) — État de surface: Méthode du profil — Étalonnage des instruments à contact (palpeur),2021-12-20,2,['17.040.30'],ISO/TC 213,9599,"[39419,21119]",[86679],"['en','fr']",20,<p>This document specifies the calibration and adjustment of the metrological characteristics of contact (stylus) instruments for the measurement of surface texture by the profile method as defined in ISO 3274. The calibration and adjustment is intended to be carried out with the aid of measurement standards.</p><p>Annex B specifies the

5830,IS,,ISO 1218:1975,Plastics — Polyamides — Determination of 'melting point',Matières plastiques — Polyamides — Détermination du 'point de fusion',1975-06-01,1,['83.080.20'],ISO/TC 61/SC 5,9599,,[8318],"['en','fr']",6,

3177,IS,,ISO 12183:1995,Controlled-potential coulometric assay of plutonium,Dosage du plutonium par coulométrie à potentiel imposé,1995-04-27,1,['27.120.30'],ISO/TC 85/SC 5,9599,,[37592],"['en','fr']",8,"<p>Specifies an analytical method for the determination of plutonium in plutonium nitrate solutions of nuclear grade with an accuracy better than 0,1 %. The method is suitable for aqueous solutions containing more than 0,05 g·l^-1 plutonium using test samples between 1 mg and 3 mg of plutonium.</p>"

37592,IS,,ISO 12183:2005,Nuclear fuel technology — Controlled-potential coulometric assay of plutonium,Technologie du combustible nucléaire — Dosage du plutonium par coulométrie à potentiel imposé,2005-02-08,2,['27.120.30'],ISO/TC 85/SC 5,9599,[3177],[66168],"['en','fr']",24,"<p>ISO 12183:2005 specifies an analytical method for the electrochemical assay of pure plutonium nitrate solutions of nuclear grade, with a total uncertainty of 0,1 % to 0,2 % at the confidence level of 0,95 for a single determination. The method is suitable for aqueous solutions containing more than 0,5 g/L plutonium and test samples containing between 4 mg and 15 mg of plutonium. Application of this technique to solut

66168,IS,,ISO 12183:2016,Nuclear fuel technology — Controlled-potential coulometric assay of plutonium,Technologie du combustible nucléaire — Dosage du plutonium par coulométrie à potentiel imposé,2016-08-05,3,['27.120.30'],ISO/TC 85/SC 5,9599,[37592],[85467],"['en','fr']",29,"<p>ISO 12183:2016 describes an analytical method for the electrochemical assay of pure plutonium nitrate solutions of nuclear grade, with a total uncertainty not exceeding ±0,2 % at the confidence level of 0,95 for a single determination (coverage factor, K = 2). The method is suitable for aqueous solutions containing more than 0,5 g/L plutonium and test samples containing between 4 mg and 15 mg of plutonium. Applicati

3141,IS,,ISO 12184:1994,"Determination of solubility in nitric acid of plutonium in unirradiated mixed oxide fuel pellets (U,Pu)O2","Détermination de la solubilité dans l'acide nitrique du plutonium des pastilles (U,Pu)O2 de combustibles d'oxydes mixtes non irradiés",1994-08-11,1,['27.120.30'],ISO/TC 85/SC 5,9599,,[59614],"['en','fr']",3,<p>Specifies an analytical method for determining the solubility in nitric acid of plutonium in whole pellets of unirradiated mixed oxide fuel (light water reactor fuels). The results provide information about the expected dissolution behaviour of irradiated pellets under industrial reprocessing conditions.</p>

21124,IS,,ISO 12185:1996,Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method,Pétroles bruts et produits pétroliers — Détermination de la masse volumique — Méthode du tube en U oscillant,1996-06-13,1,['75.080'],ISO/TC 28/SC 2,9599,,"[67520,82592]","['en','fr']",9,"<p>Gives a method for the determination, using an oscillation U-tube densitometer, of the density of crude petroleum and related products within the range 600 kg/m^3 to 1 100 kg/m^3 which can be handled as single-phase liquids at the test temperature and pressure.</p>"

35866,IS,Cor,ISO 12185:1996/Cor 1:2001,Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method — Technical Corrigendum 1,Pétroles bruts et produits pétroliers — Détermination de la masse volumique — Méthode du tube en U oscillant — Rectificatif technique 1,2001-08-23,1,['75.080'],ISO/TC 28/SC 2,9599,,"[67520,82592]","['en','fr']",1,

5832,IS,,ISO 1219-1:1991,Fluid power systems and components — Graphic symbols and circuit diagrams — Part 1: Graphic symbols,Transmissions hydrauliques et pneumatiques — Symboles graphiques et schémas de circuit — Partie 1: Symboles graphiques,1991-10-24,1,"['01.080.30','23.100.01']",ISO/TC 131,9599,,[43237],"['en','fr']",40,<p>Establishes principles for the use of symbols and specifies basic symbols and rules for devising functional symbols. Contains the alphabetical indexes in English and French. This first edition cancels and replaces ISO 1219:1976.</p>

43237,IS,,ISO 1219-1:2006,Fluid power systems and components — Graphic symbols and circuit diagrams — Part 1: Graphic symbols for conventional use and data-processing applications,Transmissions hydrauliques et pneumatiques — Symboles graphiques et schémas de circuit — Partie 1: Symboles graphiques en emploi conventionnel et informatisé,2006-10-20,2,"['01.080.30','23.100.01']",ISO/TC 131,9599,[5832],[60184],"['en','fr']",165,"<p>ISO 1219-1:2006 establishes basic elements for symbols. It lays down rules for devising fluid power symbols for use on components and in circuit diagrams.</p><p>ISO 1219-1:2006 is a collective application standard of the ISO 14617 series. In this series of Internation

5833,IS,,ISO 1219-2:1995,Fluid power systems and components — Graphic symbols and circuit diagrams — Part 2: Circuit diagrams,Transmissions hydrauliques et pneumatiques — Symboles graphiques et schémas de circuit — Partie 2: Schémas de circuit,1995-12-07,1,"['01.080.30','23.100.01']",ISO/TC 131,9599,,[51200],"['en','fr']",21,<p>Establishes the rules for drawing diagrams of fluid power systems using symbols from ISO 1219-1.</p>

36774,IS,,ISO 12192:2002,Paper and board — Compressive strength — Ring crush method,Papier et carton — Résistance à la compression — Méthode d'écrasement avec anneau,2002-11-13,1,['85.060'],ISO/TC 6/SC 2,9599,,[51263],"['en','fr']",6,"<p>ISO 12192:2002 specifies a method for the determination of the edgewise compressive strength (ring crush resistance) of paper and paperboard, especially board used in the manufacture of cartons and packing cases. </p><p>ISO 12192:2002 applies to all paper and paperboard with a thickness in the range of 280 micrometres to 580 micrometres. It may also be used for paper and board having a thickness less than 280 micrometres but those results are more a reflecti

18264,IS,,ISO 12193:1994,Animal and vegetable fats and oils — Determination of lead content — Graphite furnace atomic absorption method,Corps gras d'origines animale et végétale — Détermination de la teneur en plomb — Méthode par absorption atomique avec four en graphite,1994-10-13,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[34083],"['en','fr']",5,<p>Specifies a method for the determination of trace amounts of lead in animal and vegetable fats and oils.</p>

2680,IS,,ISO 12197:1996,Woodruff keaseat cutters — Dimensions,Fraises pour logement de clavettes-disques — Dimensions,1996-12-12,1,['25.100.20'],ISO/TC 29/SC 9,9599,,[64208],"['en','fr']",2,<p>Specifies the dimensions of milling cutters intended for manufacturing Woodruff keyseats in accordance with ISO 3912. Relates to Woodruff keyseat cutters with cylindrical shank in accordance with ISO 3338-1 and with flattened shank in accordance with ISO 3338-2.</p>

33300,IS,,ISO 12199:2000,Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet,Mise en ordre alphabétique des données lexicographiques et terminologiques multilingues représentées dans l'alphabet latin,2000-07-27,1,['01.020'],ISO/TC 37/SC 2,9599,,[84159],['en'],40,"<p>This International Standard specifies the sequence of characters to be used in the alphabetical ordering of</p><p>multilingual terminological and lexicographical data (terms, term elements, or words) represented in the Latin</p><p>alphabet. Character sets of languages represented in the Latin alphabet are taken into account insofar as</p><p>terminological or lexicographi

21203,IS,,ISO 12206:1995,Photography — Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation,Photographie — Méthodes d'évaluation de l'efficacité de la conversion chimique des images argentiques contre l'oxydation,1995-01-26,1,['37.040.20'],ISO/TC 42,9599,,[31939],['en'],12,

2078,IS,,ISO 12209-1:2000,Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air — Part 1: Yoke type connections,Bouteilles à gaz — Raccords de sortie pour robinets de bouteilles à gaz pour air comprimé respirable — Partie 1: Raccords du type à étrier,2000-11-23,1,['23.020.35'],ISO/TC 58/SC 2,9599,,[55932],"['en','fr']",6,

21213,IS,,ISO 12209-2:2000,Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air — Part 2: Threaded connections,Bouteilles à gaz — Raccords de sortie pour robinets de bouteilles à gaz pour air comprimé respirable — Partie 2: Raccords filetés,2000-11-23,1,['23.020.35'],ISO/TC 58/SC 2,9599,,[55932],"['en','fr']",11,