Withdrawn and superseded ISO standards — page 27 of 246

42934,IS,Amd,ISO 11992-2:2003/Amd 1:2007,Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 2: Application layer for brakes and running gear — Amendment 1,Véhicules routiers — Échange d'informations numériques sur les connexions électriques entre véhicules tracteurs et véhicules tractés — Partie 2: Couche d'application pour les équipements de freinage et les organes de roulement — Amendement 1,2007-09-10,2,['43.040.15'],ISO/TC 22,9599,,[55046],['en'],25,

55046,IS,,ISO 11992-2:2014,Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 2: Application layer for brakes and running gear,Véhicules routiers — Échange d'informations numériques sur les connexions électriques entre véhicules tracteurs et véhicules tractés — Partie 2: Couche d'application pour les équipements de freinage et les organes de roulement,2014-04-25,3,['43.040.15'],ISO/TC 22/SC 31,9599,"[42934,33469]",[79621],['en'],83,"<p>ISO 11992-2:2014 specifies the parameters and messages for electronically controlled braking systems, including anti-lock braking systems (ABS) and vehicle dynamics control systems (VDC), as we

24308,IS,,ISO 11992-3:1998,Road vehicles — Electrical connections between towing and towed vehicles — Interchange of digital information — Part 3: Application layer for non-braking equipment,Véhicules routiers — Connexions électriques entre véhicules tracteurs et véhicules tractés — Échange de données numériques — Partie 3: Couche application pour l'équipement autre que de freinage,1998-03-26,1,"['43.040.10','43.040.15']",ISO/TC 22,9599,,[33470],['en'],21,

33470,IS,,ISO 11992-3:2003,Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 3: Application layer for equipment other than brakes and running gear,Véhicules routiers — Échange d'informations numériques sur les connexions électriques entre véhicules tracteurs et véhicules tractés — Partie 3: Couche d'application pour les équipements autres que les équipements de freinage et les organes de roulement,2003-04-30,2,['43.040.15'],ISO/TC 22/SC 31,9599,[24308],"[68377,77009]","['en','fr']",37,"<p>ISO 11992-3:2002 specifies the parameters and messages for electronically controlled braking systems other than systems for braking and ru

42935,IS,Amd,ISO 11992-3:2003/Amd 1:2008,Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 3: Application layer for equipment other than brakes and running gear — Amendment 1,Véhicules routiers — Échange d'informations numériques sur les connexions électriques entre véhicules tracteurs et véhicules tractés — Partie 3: Couche d'application pour les équipements autres que les équipements de freinage et les organes de roulement — Amendement 1,2008-01-31,2,['43.040.15'],ISO/TC 22/SC 31,9599,,"[68377,77009]",['en'],42,

36252,IS,,ISO 11992-4:2005,Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 4: Diagnostics,Véhicules routiers — Échange d'informations numériques sur les connexions électriques entre véhicules tracteurs et véhicules tractés — Partie 4: Diagnostics,2005-07-18,1,['43.040.15'],ISO/TC 22,9599,,[55043],['en'],68,<p>ISO 11992-4:2005 specifies the data communication for diagnostic purposes on a serial data link between a road vehicle and its towed vehicle(s).</p><p>ISO 11992-4:2005 is applicable to road vehicles of a maximum authorized total mass greater than 3 500 kg.</p>

44240,IS,Cor,ISO 11992-4:2005/Cor 1:2006,Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 4: Diagnostics — Technical Corrigendum 1,Véhicules routiers — Échange d'informations numériques sur les connexions électriques entre véhicules tracteurs et véhicules tractés — Partie 4: Diagnostics — Rectificatif technique 1,2006-05-17,1,['43.040.15'],ISO/TC 22,9599,,[55043],['en'],4,

55043,IS,,ISO 11992-4:2014,Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 4: Diagnostic communication,Véhicules routiers — Échange d'informations numériques sur les connexions électriques entre véhicules tracteurs et véhicules tractés — Partie 4: Communication de diagnostic,2014-04-25,2,['43.040.15'],ISO/TC 22/SC 31,9599,"[44240,36252]",[79622],['en'],35,"<p>ISO 11992-4:2014 specifies the diagnostic communication over a CAN between the towing and towed vehicle(s) of a commercial vehicle and its trailer(s), according to ISO 11992-2 or ISO 11992-3, which allows a diagnostic tester (client) to control diagnostic functions in

20632,IS,,ISO 11997-1:1998,Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humidity,Peintures et vernis — Détermination de la résistance aux conditions de corrosion cyclique — Partie 1: Brouillard salin/sécheresse/humidité,1998-04-02,1,['87.040'],ISO/TC 35/SC 9,9599,,[39379],"['en','fr']",11,

30996,IS,Cor,ISO 11997-1:1998/Cor 1:1998,Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humidity — Technical Corrigendum 1,Peintures et vernis — Détermination de la résistance aux conditions de corrosion cyclique — Partie 1: Brouillard salin/sécheresse/humidité — Rectificatif technique 1,1998-10-15,1,['87.040'],ISO/TC 35/SC 9,9599,,[39379],"['en','fr']",2,

39379,IS,,ISO 11997-1:2005,Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humidity,Peintures et vernis — Détermination de la résistance aux conditions de corrosion cyclique — Partie 1: Brouillard salin/sécheresse/humidité,2005-03-21,2,['87.040'],ISO/TC 35/SC 9,9599,"[20632,30996]",[64859],"['en','fr','ru']",13,<p>ISO 11997-1:2005 describes a method for the determination of the resistance of coatings to one of four defined cycles of wet (salt fog)/dry/humidity conditions using specified solutions.</p>

64859,IS,,ISO 11997-1:2017,Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid,Peintures et vernis — Détermination de la résistance aux conditions de corrosion cyclique — Partie 1: Brouillard salin/sécheresse/humidité,2017-08-11,3,['87.040'],ISO/TC 35/SC 9,9599,[39379],[87280],"['en','fr']",14,<p>ISO 11997-1:2017 specifies a method for the determination of the resistance of coatings to one of four defined cycles of wet (salt fog)/dry/humid conditions using specified solutions.</p>

28784,IS,,ISO 11997-2:2000,Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light,Peintures et vernis — Détermination de la résistance aux conditions de corrosion cyclique — Partie 2: Brouillard salin/sécheresse/humidité/lumière UV,2000-07-20,1,['87.040'],ISO/TC 35/SC 9,9599,,[56808],"['en','fr','ru']",5,

56808,IS,,ISO 11997-2:2013,Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light,Peintures et vernis — Détermination de la résistance aux conditions de corrosion cyclique — Partie 2: Brouillard salin/sécheresse/humidité/lumière UV,2013-08-13,2,['87.040'],ISO/TC 35/SC 9,9599,[28784],[87282],"['en','fr','ru']",8,<p>ISO 11197-2:2013 specifies a test method of determining resistance of coatings to a defined cycle of wet (salt fog)/dry/humidity/UV light conditions using a specified solution.</p>

20631,IS,,ISO 11998:1998,Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings,Peintures et vernis — Détermination de la résistance au frottement humide et de l'aptitude au nettoyage des revêtements,1998-07-16,1,['87.040'],ISO/TC 35/SC 9,9599,,[36953],"['en','fr']",11,

64017,IS,,ISO 11999-1:2015,PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 1: General,Équipement de protection personnelle pour pompiers — Méthodes d'essai et exigences pour les équipements de protection personnelle utilisés par les pompiers qui sont à risque d'une exposition à des niveaux élevés de chaleur et/ou de flamme quand la lutte contre les incendies survient dans les structures — Partie 1: Généralités,2015-06-04,1,['13.340.10'],ISO/TC 94/SC 14,9599,[60185],[82549],['en'],36,"<p>ISO 11999 specifies minimum design and performance require

64019,IS,,ISO 11999-3:2015,PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 3: Clothing,Équipement de protection personnelle pour pompiers — Méthodes d'essai et exigences pour les équipements de protection personnelle utilisés par les pompiers qui sont à risque d'une exposition à des niveaux élevés de chaleur et/ou de flamme quand la lutte contre les incendies survient dans les structures — Partie 3: Vêtements,2015-06-04,1,['13.340.10'],ISO/TC 94/SC 14,9599,[60187],[82550],['en'],23,"<p>ISO 11999-3:2015 specifies the minimum design and performan

64020,IS,,ISO 11999-4:2015,PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 4: Gloves,Équipement de protection personnelle pour pompiers — Méthodes d'essai et exigences pour les équipements de protection personnelle utilisés par les pompiers qui sont à risque d'une exposition à des niveaux élevés de chaleur et/ou de flamme quand la lutte contre les incendies survient dans les structures — Partie 4: Gants,2015-06-04,1,['13.340.10'],ISO/TC 94/SC 14,9599,[60191],[82551],['en'],17,"<p>ISO 11999-4:2015 specifies minimum design and performance require

60192,IS,,ISO 11999-5:2015,PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 5: Helmets,Équipement de protection personnelle pour pompiers — Méthodes d'essai et exigences pour les équipements de protection personnelle utilisés par les pompiers qui sont à risque d'une exposition à des niveaux élevés de chaleur et/ou de flamme quand la lutte contre les incendies survient dans les structures — Partie 5: Casques,2015-11-03,1,['13.340.10'],ISO/TC 94/SC 14,9599,,[82552],['en'],24,"<p>ISO 11999-5:2015 specifies the minimum design and performance require

60193,IS,,ISO 11999-6:2016,PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 6: Footwear,Équipement de protection personnelle pour pompiers — Méthodes d'essai et exigences pour les équipements de protection personnelle utilisés par les pompiers qui sont à risque d'une exposition à des niveaux élevés de chaleur et/ou de flamme quand la lutte contre les incendies survient dans les structures — Partie 6: Chaussures,2016-07-21,1,['13.340.10'],ISO/TC 94/SC 14,9599,,[82553],['en'],28,"<p>ISO 11999-6:2016 specifies the minimum design and performance req

60196,IS,,ISO 11999-9:2016,PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 9: Fire hoods,Équipement de protection personnelle pour pompiers — Méthodes d'essai et exigences pour les équipements de protection personnelle utilisés par les pompiers qui sont à risque d'une exposition à des niveaux élevés de chaleur et/ou de flamme quand la lutte contre les incendies survient dans les structures — Partie 9: Hottes de feu,2016-01-08,1,['13.340.10'],ISO/TC 94/SC 14,9599,,"[76467,85652]",['en'],8,"<p>ISO 11999-9:2016 specifies the minimum design and per

3593,IS,,ISO 12:1976,Aerospace — Pipelines — Identification scheme,Aéronefs — Tuyauteries — Procédé d'identification,1976-11-01,1,['49.080'],ISO/TC 20/SC 10,9599,,[3594],"['en','fr']",5,

19692,IS,,ISO 12000:1996,Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods,Plastiques/caoutchouc — Dispersions de polymères et de latex de caoutchouc (naturel et synthétique) — Définitions et revue des méthodes d'essai,1996-11-07,1,"['83.080.01','83.040.10']",ISO/TC 61/SC 9,9599,,[32866],"['en','fr']",6,

32866,IS,,ISO 12000:2000,Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods,Plastiques/caoutchouc — Dispersions de polymères et latex de caoutchouc (naturel et synthétique) — Définitions et revue des méthodes d'essai,2000-03-16,2,"['83.080.20','83.040.10']",ISO/TC 61/SC 9,9599,[19692],[59255],"['en','fr']",5,

27783,IS,,ISO 12003-1:2002,Agricultural and forestry tractors — Narrow-track wheeled tractors — Part 1: Front-mounted roll-over protective structures,Tracteurs agricoles et forestiers — Tracteurs à roues à voie étroite — Partie 1: Structures de protection contre le retournement montées à l'avant,2002-10-22,1,['65.060.10'],ISO/TC 23/SC 2,9599,,[42459],"['en','fr']",37,"<p>ISO 12003-1 specifies procedures for both the static and dynamic testing of roll-over protective structures (ROPS) front-mounted on narrow-track wheeled agricultural and forestry tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable front, two-post ROPS, includes any associated rear fixtures

42459,IS,,ISO 12003-1:2008,Agricultural and forestry tractors — Roll-over protective structures on narrow-track wheeled tractors — Part 1: Front-mounted ROPS,Tracteurs agricoles et forestiers — Structures de protection contre le retournement (ROPS) pour tracteurs à roues à voie étroite — Partie 1: ROPS montées à l'avant,2008-07-23,2,['65.060.10'],ISO/TC 23/SC 2,9599,[27783],[77024],"['en','fr']",44,"<p>ISO 12003-1:2008 specifies procedures for both the static and dynamic testing of roll-over protective structures (ROPS) front-mounted on narrow-track wheeled agricultural and forestry tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable, front, two-post ROPS,

27784,IS,,ISO 12003-2:2002,Agricultural and forestry tractors — Narrow-track wheeled tractors — Part 2: Rear-mounted roll-over protective structures,Tracteurs agricoles et forestiers — Tracteurs à roues à voie étroite — Partie 2: Structures de protection contre le retournement montées à l'arrière,2002-10-22,1,['65.060.10'],ISO/TC 23/SC 2,9599,,[42157],"['en','fr']",31,"<p>ISO 12003-2 specifies procedures for both the static and dynamic testing of roll-over protective structures (ROPS) rear-mounted on narrow-track wheeled agriculture and forestry tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable, rear, two-post rollbar, frame and cab ROPS, and is applicab

42157,IS,,ISO 12003-2:2008,Agricultural and forestry tractors — Roll-over protective structures on narrow-track wheeled tractors — Part 2: Rear-mounted ROPS,Tracteurs agricoles et forestiers — Structures de protection contre le retournement (ROPS) pour tracteurs à roues à voie étroite — Partie 2: ROPS montées à l'arrière,2008-07-23,2,['65.060.10'],ISO/TC 23/SC 2,9599,[27784],[77025],"['en','fr']",38,"<p>ISO 12003-2:2008 specifies procedures for both the static and dynamic testing of roll-over protective structures (ROPS) rear-mounted on narrow-track wheeled agricultural and forestry tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable, rear, two-post roll b

38369,IS,,ISO 12004-1:2008,Metallic materials — Sheet and strip — Determination of forming-limit curves — Part 1: Measurement and application of forming-limit diagrams in the press shop,Matériaux métalliques — Tôles et bandes — Détermination des courbes limites de formage — Partie 1: Mesurage et application des diagrammes limites de formage dans les ateliers d'emboutissage,2008-10-15,1,['77.040.10'],ISO/TC 164/SC 2,9599,[3140],[78137],"['en','fr']",8,"<p>ISO 12004-1:2008 provides guidelines for developing forming-limit diagrams and forming-limit curves for metal sheets and strips of thicknesses from 0,3 mm to 4 mm.</p>"

3140,IS,,ISO 12004:1997,Metallic materials — Guidelines for the determination of forming-limit diagrams,Matériaux métalliques — Lignes directrices pour la détermination de diagrammes limites de formage,1997-01-22,1,['77.040.10'],ISO/TC 164/SC 2,9599,,"[43621,38369]","['en','fr']",7,"<p>Provides guidelines for developing forming-limit diagrams and forming-limit curves for metal sheets and strips of nominal thicknesses from 0,2 mm to 3 mm.</p>"

43621,IS,,ISO 12004-2:2008,Metallic materials — Sheet and strip — Determination of forming-limit curves — Part 2: Determination of forming-limit curves in the laboratory,Matériaux métalliques — Tôles et bandes — Détermination des courbes limites de formage — Partie 2: Détermination des courbes limites de formage en laboratoire,2008-10-15,1,['77.040.10'],ISO/TC 164/SC 2,9599,[3140],[78138],"['en','fr']",27,"<p>ISO 12004-2:2008 specifies the testing conditions to be used when constructing a forming-limit curve (FLC) at ambient temperature and using linear strain paths. The material considered is flat, metallic and of thickness between 0,3 mm and 4 mm. </p>"

20633,IS,,ISO 12005:1999,Lasers and laser-related equipment — Test methods for laser beam parameters — Polarization,Lasers et équipements associés aux lasers — Méthodes d'essai des paramètres des faisceaux laser — Polarisation,1999-07-15,1,['31.260'],ISO/TC 172/SC 9,9599,,[31277],"['en','fr']",10,

31277,IS,,ISO 12005:2003,Lasers and laser-related equipment — Test methods for laser beam parameters — Polarization,Lasers et équipements associés aux lasers — Méthodes d'essai des paramètres du faisceau laser — Polarisation,2003-04-08,2,['31.260'],ISO/TC 172/SC 9,9599,[20633],"[45852,77681]","['en','fr']",11,"<p>ISO 12005:2003 specifies a method for determining the polarization status and, whenever possible, the degree of polarization of the beam from a continuous wave (cw) laser. It can also be applied to repetitively pulsed lasers, if their electric field vector orientation does not change from pulse to pulse.</p><p>ISO 12005:2003 also specifies the method for determining the direction of

35333,IS,,ISO 12006-2:2001,Building construction — Organization of information about construction works — Part 2: Framework for classification of information,Construction immobilière — Organisation de l'information des travaux de construction — Partie 2: Plan type pour la classification de l'information,2001-11-01,1,['91.010.01'],ISO/TC 59/SC 13,9599,,[61753],['en'],17,

38706,IS,,ISO 12006-3:2007,Building construction — Organization of information about construction works — Part 3: Framework for object-oriented information,Construction immobilière — Organisation de l'information des travaux de construction — Partie 3: Schéma pour l'information basée sur l'objet,2007-04-17,1,['91.010.01'],ISO/TC 59/SC 13,9599,[35334],[74932],"['en','fr']",32,"<p>ISO 12006-3:2007 specifies a language-independent information model which can be used for the development of dictionaries used to store or provide information about construction works. It enables classification systems, information models, object models and process models to be referenced from within a common framewo

51124,IS,,ISO 12010:2012,Water quality — Determination of short-chain polychlorinated alkanes (SCCPs) in water — Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI),Qualité de l'eau — Détermination des alcanes polychlorés à chaîne courte (SCCP) dans l'eau — Méthode par chromatographie gazeuse-spectrométrie de masse (CG-SM) avec ionisation chimique négative (ICN),2012-03-15,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[72127],"['en','fr']",28,"<p>ISO 12010:2012 specifies a method for the quantitative determination of the sum of short-chain polychlorinated <i>n</i>‑alkanes, also known as short-chain polychlorinated paraffins (SCCPs), in the carbon bond

20761,IS,,ISO 12017:1995,Plastics — Poly(methyl methacrylate) double- and triple-skin sheets — Test methods,Plastiques — Plaques de poly(méthacrylate de méthyle) à double et triple paroi — Méthodes d'essai,1995-02-23,1,['83.140.10'],ISO/TC 61/SC 11,9599,,[82321],"['en','fr']",14,"<p>Specifies the test methods for quality control of poly(methyl methacrylate) (PMMA) extruded double- and triple-skin flat sheets, obtained from colourless and coloured transparent, translucent and opaque grades of materials. The minimum sheet width is 600 mm.</p>"

1063,IS,,ISO 12021-1:1996,Road vehicles — Sensitivity to lateral wind — Part 1: Open-loop test method using wind generator input,Véhicules routiers — Sensibilité au vent latéral — Partie 1: Méthode en boucle ouverte avec génération de vent,1996-08-22,1,['43.020'],ISO/TC 22,9599,,[53602],['en'],11,"<p>Gives an open-loop test method to determine the sensitivity to lateral wind of a vehicle by means of a wind generator. It applies to passenger cars as defined in ISO 3833, passenger car-trailer combinations and light trucks.</p>"

5794,IS,,ISO 1203:1974,Photography — Roll film cameras — Back window location and picture sizes,Photographie — Appareils photographiques à pellicules — Emplacement du voyant de déroulement et dimensions d'image,1974-07-01,2,['37.040.10'],ISO/TC 42,9599,,[5795],['en'],2,

5795,IS,,ISO 1203:1984,Photography — Roll film cameras — Back window location and picture sizes,Photographie — Appareils photographiques à pellicules — Emplacement du voyant de déroulement et dimensions d'image,1984-07-01,3,['37.040.10'],ISO/TC 42,9599,[5794],[20053],"['en','fr']",2,

20797,IS,,ISO 12039:2001,"Stationary source emissions — Determination of the mass concentration of carbon monoxide, carbon dioxide and oxygen in flue gas — Performance characteristics of automated measuring systems","Émissions de sources fixes — Détermination de la concentration de monoxyde de carbone, de dioxyde de carbone et d'oxygène — Caractéristiques de fonctionnement et étalonnage de systèmes automatiques de mesure",2001-06-28,1,['13.040.40'],ISO/TC 146/SC 1,9599,,[71638],"['en','fr']",17,

5796,IS,,ISO 1204:1972,Reciprocating internal combustion engines — Designation of the direction of rotation,Moteurs alternatifs à combustion interne — Désignation du sens de rotation,1972-04-01,1,['27.020'],ISO/TC 70,9599,,[5797],"['en','fr']",1,

20913,IS,,ISO 12043:1995,Rolling bearings — Single-row cylindrical roller bearings — Chamfer dimensions for loose rib and non-rib sides,Roulements — Roulements à rouleaux cylindriques à une rangée — Dimensions des arrondis des rondelles d'épaulement et des bagues côté sans épaulement,1995-05-18,1,['21.100.20'],ISO/TC 4,9599,,[44031],"['en','fr']",3,"<p>Specifies, for the diameter series 0, 2 and 3, the minimum chamfer dimensions for non-rib sides and loose ribs of single-row cylindrical roller bearings where these dimensions differ from the minimum chamfer dimensions specified in ISO 15.</p>"

20914,IS,,ISO 12044:1995,Rolling bearings — Single-row angular contact ball bearings — Chamfer dimensions for outer ring non-thrust side,Roulements — Roulements à billes à contact oblique à une rangée — Dimensions des arrondis des bagues côté non chargé,1995-05-18,1,['21.100.20'],ISO/TC 4/SC 12,9599,,[60134],"['en','fr']",3,"<p>Specifies the minimum chamfer dimensions for the non-thrust side of single-row angular contact ball bearing outer rings where the minimum dimensions differ from those specified in ISO 15. Applicable for bearings in the diameter series 9, 0 and 2 for contact angles up to and including 30°, and in the diameter series 2 and 3 for contact angles over 30°.</p>"

20804,IS,,ISO 12046:1995,Synchronous belt drives — Automotive belts — Determination of physical properties,Transmissions synchrones par courroies — Courroies pour la construction automobile — Détermination des caractéristiques physiques,1995-08-17,1,['43.060.10'],ISO/TC 41/SC 4,9599,,"[41585,36190]","['en','fr']",7,"<p>Methods for the determination of the physical properties of synchronous belts in cars, used in driving engine parts such as camshafts and fuel injection pumps.</p>"

41585,IS,,ISO 12046:2012,Synchronous belt drives — Automotive belts — Determination of physical properties,Transmissions synchrones par courroies — Courroies pour la construction automobile — Détermination des caractéristiques physiques,2012-03-08,2,"['43.060.10','21.220.10']",ISO/TC 41/SC 4,9599,[20804],[87906],"['en','fr']",10,"<p>This International Standard specifies test methods for determining the physical properties of synchronous belts</p><p>used in driving engine parts, such as camshafts, fuel injection pumps, balancing shafts. These test methods</p><p>are intended to provide a means of characterizing synchronous belt properties for belts which are evaluated</p><p>and qualified by dy

5798,IS,,ISO 1205:1972,Reciprocating internal combustion engines — Designation of the cylinders,Moteurs alternatifs à combustion interne — Désignation des cylindres,1972-04-01,1,['27.020'],ISO/TC 70,9599,,[5797],"['en','fr']",4,

43218,IS,,ISO 12052:2006,Health informatics — Digital imaging and communication in medicine (DICOM) including workflow and data management,Informatique de santé — Imagerie numérique et communication en médecine (DICOM) incluant le déroulement des opérations et la gestion des données,2006-10-20,1,['35.240.80'],ISO/TC 215,9599,,[72941],"['en','fr']",11,"<p>Within the field of health informatics this ISO 12052:2006 addresses the exchange of digital images, and information related to the production and management of those images, between both medical imaging equipment and systems concerned with the management and communication of that information.</p><p>ISO 12052:2006 is intended to facilitate i

72941,IS,,ISO 12052:2017,Health informatics — Digital imaging and communication in medicine (DICOM) including workflow and data management,Informatique de santé — Imagerie numérique et communication en médecine (DICOM) incluant le déroulement des opérations et la gestion des données,2017-08-17,2,['35.240.80'],ISO/TC 215,9599,[43218],[86414],"['en','fr']",17,"<p>ISO 12052:2017, within the field of health informatics, addresses the exchange of digital images and information related to the production and management of those images, between both medical imaging equipment and systems concerned with the management and communication of that information.</p><p>ISO 12052:2017 facilitates interoperabi

20843,IS,,ISO 12058-1:1997,Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method,Plastiques — Détermination de la viscosité au moyen d'un viscosimètre à chute de bille — Partie 1: Méthode du tube incliné,1997-03-27,1,['83.080.01'],ISO/TC 61/SC 5,9599,[17058],[74985],"['en','fr']",5,

5799,IS,,ISO 1206:1982,Needle roller bearings — Light and medium series — Dimensions and tolerances,Roulements à aiguilles — Séries légère et moyenne — Dimensions et tolérances,1982-07-01,2,['21.100.20'],ISO/TC 4,9599,[8237],[30241],"['en','fr']",4,<p>Cancels and replaces the first edition (i.e. ISO 1206-1976). Specifies boundary dimensions and normal class tolerances. Apply to complete needle roller bearings or to bearings without inner ring. For chamfer dimension limits see ISO 582. For radial internal clearances see ISO 5753.</p>

30241,IS,,ISO 1206:2001,"Rolling bearings — Needle roller bearings, dimension series 48, 49 and 69 — Boundary dimensions and tolerances","Roulements — Roulements à aiguilles, séries de dimensions 48, 49 et 69 — Dimensions d'encombrement et tolérances",2001-11-15,3,['21.100.20'],ISO/TC 4/SC 5,9599,[5799],[65934],"['en','fr']",9,

54726,IS,Amd,ISO 1206:2001/Amd 1:2013,"Rolling bearings — Needle roller bearings, dimension series 48, 49 and 69 — Boundary dimensions and tolerances — Amendment 1: Tolerances for shaft raceway","Roulements — Roulements à aiguilles, séries de dimensions 48, 49 et 69 — Dimensions d'encombrement et tolérances — Amendement 1: Tolérances du chemin de roulement de l'arbre",2013-08-07,3,['21.100.20'],ISO/TC 4/SC 5,9599,,[65934],"['en','fr']",3,

65934,IS,,ISO 1206:2018,"Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values","Roulements — Roulements à aiguilles avec bagues usinées — Dimensions d'encombrement, spécification géométrique des produits (GPS) et valeurs de tolérance",2018-02-09,4,['21.100.20'],ISO/TC 4/SC 5,9599,"[54726,30241]",[85375],"['en','fr']",19,"<p>ISO 1206:2018 specifies the boundary dimensions and normal class tolerance values for needle roller bearings with machined rings.</p><p>ISO 1206:2018 specifies dimensional and geometrical characteristics, and limit deviations from nominal sizes.</p><p>These specifications apply t

5800,IS,,ISO 1207:1983,Slotted cheese head screws — Product grade A,"Vis à métaux à tête cylindrique, fendue — Grade A",1983-07-01,1,['21.060.10'],ISO/TC 2,9599,,[5801],"['en','fr']",4,

5801,IS,,ISO 1207:1992,Slotted cheese head screws — Product grade A,Vis à métaux à tête cylindrique fendue — Grade A,1992-05-14,2,['21.060.10'],ISO/TC 2/SC 11,9599,[5800],[54039],"['en','fr']",4,"<p>Specifies the characteristics (dimensions, mass, designation) of screws with threads from M1,6 to M10 inclusive. If, in special cases, specifications other than those listed here are required, they should be selected from existing standards, e.g. ISO 261, 888, 898-1, 965-2. 3506, 4759-1.</p>"

33051,IS,,ISO 12080-1:2000,Dried skimmed milk — Determination of vitamin A content — Part 1: Colorimetric method,Lait écrémé en poudre — Détermination de la teneur en vitamine A — Partie 1: Méthode colorimétrique,2000-06-15,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[53830],"['en','fr']",7,

28812,IS,,ISO 12080-2:2000,Dried skimmed milk — Determination of vitamin A content — Part 2: Method using high-performance liquid chromatography,Lait écrémé en poudre — Détermination de la teneur en vitamine A — Partie 2: Méthode par chromatographie en phase liquide à haute performance,2000-06-15,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[53831],"['en','fr']",7,

20877,IS,,ISO 12081:1998,Milk — Determination of calcium content — Titrimetric method,Lait — Détermination de la teneur en calcium — Méthode titrimétrique,1998-12-20,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[55776],"['en','fr']",5,

20862,IS,,ISO 12082:1997,"Processed cheese and processed cheese products — Calculation of the content of added citrate emulsifying agents and acidifiers/pH-controlling agents, expressed as citric acid","Fromages fondus — Détermination, par calcul, de la teneur en émulsifiants et substances acidifiantes/de contrôle du pH ajoutés, à base de citrate, exprimée en acide citrique",1997-01-22,1,['67.100.30'],ISO/TC 34/SC 5,9599,,[44511],"['en','fr']",2,"<p>Gives a method for the calculation of the approximate content of added citrate emulsifying agents and acidifiers/pH-controlling agents, expressed as citric acid, in processed cheese and processed cheese products. Does apply to cheeses and cheese

1997,IS,,ISO 12086-1:1995,Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Polymères fluorés: dispersions et matériaux pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,1995-12-07,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[37662],"['en','fr']",29,<p>Establishes a system of designation for fluoropolymer materials that may be used as the basis for specifications. Covers the homopolymers and various copolymers of fluoromonomers used as dispersions as well as for moulding and extrusion materials. Describes the designation system and provides codes and tables of values fo

37662,IS,,ISO 12086-1:2006,Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Polymères fluorés: dispersions et matériaux pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,2006-02-09,2,['83.080.20'],ISO/TC 61/SC 9,9599,[1997],"[55455,68422]","['en','fr']",31,"<p>ISO 12086-1:2006 establishes a system of designation for fluoropolymer materials that may be used as the basis for specifications. It covers the homopolymers and various copolymers of fluoromonomers used as dispersions and for moulding, extrusion and other specialized applications.</p>"

44486,IS,Cor,ISO 12086-1:2006/Cor 1:2006,Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 1: Designation system and basis for specifications — Technical Corrigendum 1,Plastiques — Polymères fluorés: dispersions et matériaux pour moulage et extrusion — Partie 1: Système de désignation et base de spécification — Rectificatif technique 1,2006-08-09,2,['83.080.20'],ISO/TC 61/SC 9,9599,,"[55455,68422]","['en','fr']",2,

21016,IS,,ISO 12086-2:1995,Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polymères fluorés: dispersions et matériaux pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,1995-12-07,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[37663],"['en','fr']",41,"<p>Describes the preparation of test specimens and provides test methods to determine characteristics of thermoplastic fluoropolymer resins. Results from the testing may be used as the basis for designation, material specifications, or both. Specifies the conditions of test for the determination.<

37663,IS,,ISO 12086-2:2006,Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Polymères fluorés: dispersions et matériaux pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,2006-02-09,2,['83.080.20'],ISO/TC 61/SC 9,9599,[21016],"[68423,55456]","['en','fr']",45,"<p>ISO 12086-2:2006 describes the preparation of test specimens and provides test methods to define characteristics of thermoplastic fluoropolymer resins. Results from the testing may be used as the basis for designation, material specifications or both.</p>"

44487,IS,Cor,ISO 12086-2:2006/Cor 1:2006,Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties — Technical Corrigendum 1,Plastiques — Polymères fluorés: dispersions et matériaux pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés — Rectificatif technique 1,2006-07-26,2,['83.080.20'],ISO/TC 61/SC 9,9599,,"[68423,55456]","['en','fr']",2,

5804,IS,,ISO 1209-1:1990,"Cellular plastics, rigid — Flexural tests — Part 1: Bending test",Plastiques alvéolaires rigides — Essais de flexion — Partie 1: Essai de flexion,1990-10-25,1,['83.100'],ISO/TC 61/SC 10,9599,[5803],[34844],"['en','fr']",3,<p>Specifies a method of test for assessing the behaviour of a bar of rigid cellular plastic under the action of three-point bending. It may be used to determine either the load for a specified deformation or the load at break. The method is not applicable to brittle cellular plastics and is limited to materials of 20 mm thickness or greater. A load is applied at a uniform rate by means of a loading edge to a test specimen supported at two position

34844,IS,,ISO 1209-1:2004,Rigid cellular plastics — Determination of flexural properties — Part 1: Basic bending test,Plastiques alvéolaires rigides — Détermination des propriétés de flexion — Partie 1: Essai simple de flexion,2004-06-18,2,['83.100'],ISO/TC 61/SC 10,9599,[5804],[45079],['en'],4,<p>ISO 1209-1:2004 specifies a simple method for assessing the behaviour of a bar of rigid cellular plastic under the action of three-point bending.</p><p>It may be used to determine either the load for a specified deformation or the load at break.</p><p>The version of the method specified uses small test specimens and does not produce pure bending. Hence it does not permit the calculation of the flex

5803,IS,,ISO 1209:1976,Rigid cellular plastics — Bending test,Matières plastiques alvéolaires rigides — Essai de flexion,1976-08-01,1,['83.100'],ISO/TC 61,9599,,"[5806,5804]","['en','fr']",2,

5806,IS,,ISO 1209-2:1990,"Cellular plastics, rigid — Flexural tests — Part 2: Determination of flexural properties",Plastiques alvéolaires rigides — Essais de flexion — Partie 2: Détermination des propriétés de flexion,1990-10-25,1,['83.100'],ISO/TC 61/SC 10,9599,[5803],[34843],"['en','fr']",3,<p>Specifies a method of test for determining the flexural strength and the apparent flexural modulus of elasticity of rigid cellular plastics. A load is applied at a uniform rate by means of a cylindrical loading edge to a test specimen supported at two positions. The load is applied perpendicularly to the specimen at a position midway between the supporting positions. The values of the load and the d

34843,IS,,ISO 1209-2:2004,Rigid cellular plastics — Determination of flexural properties — Part 2: Determination of flexural strength and apparent flexural modulus of elasticity,Plastiques alvéolaires rigides — Détermination des propriétés de flexion — Partie 2: Détermination de la résistance à la flexion et du module apparent d'élasticité en flexion,2004-06-18,2,['83.100'],ISO/TC 61/SC 10,9599,[5806],[45080],['en'],5,<p>ISO 1209-2:2004 specifies a method for determining the flexural strength and the apparent flexural modulus of elasticity of rigid cellular plastics.</p>

23581,IS,,ISO 12092:2000,"Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure — Resistance to internal pressure — Test method","Raccords, robinets et autres composants de systèmes de canalisation en poly(chlorure de vinyle) non plastifié (PVC-U), poly(chlorure de vinyle) chloré (PVC-C), acrylonitrile-butadiène-styrène (ABS) et acrylonitrile-styrène-ester acrylique (ASA) pour canalisations sous pression — Résistance à la pression interne — Méthode d'essai",2000-04-06,1,"['23.040.99','23.040.45',

1336,IS,,ISO 12094:1994,Welded steel tubes for pressure purposes — Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes,Tubes en acier soudés pour service sous pression — Contrôle par ultrasons pour la détection des imperfections de laminage des feuillards/plaques utilisés pour la fabrication de tubes soudés,1994-12-22,1,"['77.040.20','23.040.10']",ISO/TC 17/SC 19,9599,,[44673],"['en','fr']",7,"<p>Describes requirements for the ultrasonic testing of strips/plates used in the manufacture of welded tubes for the detection of laminar imperfections according to three different acceptance levels. This inspection shall be carried ou

1300,IS,,ISO 12095:1994,Seamless and welded steel tubes for pressure purposes — Liquid penetrant testing,Tubes en acier sans soudure et soudés pour service sous pression — Contrôle par ressuage,1994-12-15,1,"['77.040.20','23.040.10','77.140.75']",ISO/TC 17/SC 19,9599,,[44674],"['en','fr']",6,"<p>Refers to liquid penetrant testing of seamless and welded tubes for the detection of surface imperfections, according to four different test categories. May be applied to all or any part of the tube surface as required by the relevant product quality standards.</p>"

21552,IS,,ISO 12096:1996,Submerged arc-welded steel tubes for pressure purposes — Radiographic testing of the weld seam for the detection of imperfections,Tubes en acier soudés à l'arc immergé pour service sous pression — Contrôle radiographique du cordon de soudure pour la détection des imperfections,1996-05-02,1,"['23.040.10','77.140.75','25.160.40']",ISO/TC 17/SC 19,9599,,[44675],"['en','fr']",7,<p>Gives requirements for radiographic testing of the longitudinal or spiral weld seams of submerged arc-welded steel tubes for the detection of imperfections using the X-ray film technique.</p>

21687,IS,,ISO 12098:1994,Commercial vehicles with 24 V systems — 15-pole connectors between towing vehicles and trailers — Dimensions and contact allocation,Véhicules utilitaires équipés d'un système électrique 24 V — Connecteurs à 15 contacts pour liaison entre le véhicule tracteur et le véhicule tracté — Dimensions et affectation des contacts,1994-12-01,1,['43.040.10'],ISO/TC 22,9599,,[30203],"['en','fr']",9,<p>Specifies dimensions and specific requirements for the 15-pole connector and its contact allocation to enable electrical connection between commercial towing vehicles and their trailers equipped with 24 V systems to be made and to ensure interchangeability. Further specifies a park

34996,IS,Cor,ISO 12098:1994/Cor 1:2001,Commercial vehicles with 24 V systems — 15-pole connectors between towing vehicles and trailers — Dimensions and contact allocation — Technical Corrigendum 1,Véhicules utilitaires équipés d'un système électrique 24 V — Connecteurs à 15 contacts pour liaison entre le véhicule tracteur et le véhicule tracté — Dimensions et affectation des contacts — Rectificatif technique 1,2001-03-29,1,['43.040.10'],ISO/TC 22,9599,,[30203],"['en','fr']",4,

30203,IS,,ISO 12098:2004,Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 15-pole connector for vehicles with 24 V nominal supply voltage,Véhicules routiers — Connecteurs pour liaisons électriques entre véhicules tracteurs et véhicules tractés — Connecteur à 15 contacts pour les véhicules à tension nominale de 24 V,2004-02-02,2,['43.040.10'],ISO/TC 22/SC 32,9599,"[34996,21687]",[71993],"['en','fr']",12,"<p>ISO 12098:2004 gives the dimensions of, and specifies the contact allocation and tests and test requirements for, connectors for the electrical connection of equipment other than braking systems and running gear of towing and towed vehicles with 24 V

51197,IS,,ISO 12099:2010,"Animal feeding stuffs, cereals and milled cereal products — Guidelines for the application of near infrared spectrometry","Aliments des animaux, céréales et produits de mouture des céréales — Lignes directrices pour l'application de la spectrométrie dans le proche infrarouge",2010-06-07,1,['65.120'],ISO/TC 34/SC 10,9599,,[67352],"['en','fr','ru']",30,"<p>ISO 12099:2010 gives guidelines for the determination by near infrared spectroscopy of constituents such as moisture, fat, protein, starch, and crude fibre as well as parameters such as digestibility in animal feeding stuffs, cereals and milled cereal products.</p><p>The determinations are based on spectrometric mea

3923,IS,,ISO 121:1980,Magnesium-aluminium-zinc alloy ingots and alloy castings — Chemical composition and mechanical properties of sand cast reference test bars,Lingots et pièces moulées en alliages magnésium-aluminium-zinc — Composition chimique et caractéristiques mécaniques des éprouvettes de référence moulées en sable,1980-08-01,1,['77.150.01'],ISO/TC 79/SC 5,9599,[3924],[28573],"['en','fr']",2,

5807,IS,,ISO 1210:1982,Plastics — Determination of flammability characteristics of plastics in the form of small specimens in contact with a small flame,Plastiques — Détermination des caractéristiques d'inflammabilité des plastiques sous forme de petites éprouvettes soumis à une petite flamme,1982-04-01,1,"['83.080.01','13.220.40']",ISO/TC 61/SC 4,9599,,[5808],"['en','fr']",3,

5808,IS,,ISO 1210:1992,Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source,Plastiques — Détermination du comportement au feu d'éprouvettes horizontales et verticales au contact d'une petite flamme comme source d'allumage,1992-07-23,2,"['83.080.01','13.220.40']",ISO/TC 61/SC 4,9599,[5807],[26271],"['en','fr']",10,

27239,IS,,ISO 12100-1:2003,"Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology","Sécurité des machines — Notions fondamentales, principes généraux de conception — Partie 1: Terminologie de base, méthodologie",2003-11-05,1,"['13.110','01.040.13']",ISO/TC 199,9599,[20935],[51528],"['en','fr']",33,"<p>ISO 12100-1:2003 defines basic terminology and methodology used in achieving safety of machinery.</p><p>The provisions stated are intended for the designer.</p><p>The standard does not deal with damage to domestic animals, property or the environment.</p>"

46576,IS,Amd,ISO 12100-1:2003/Amd 1:2009,"Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology — Amendment 1","Sécurité des machines — Notions fondamentales, principes généraux de conception — Partie 1: Terminologie de base, méthodologie — Amendement 1",2009-05-13,1,"['13.110','01.040.13']",ISO/TC 199,9599,,[51528],"['en','fr']",1,

27240,IS,,ISO 12100-2:2003,"Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles","Sécurité des machines — Notions fondamentales, principes généraux de conception — Partie 2: Principes techniques",2003-11-05,1,['13.110'],ISO/TC 199,9599,[20936],[51528],"['en','fr']",32,"<p>ISO 12100-2:2003 defines technical principles to help designers in achieving safety in the design of machinery.</p><p>It does not deal with damage to domestic animals, property or the environment.</p>"

46575,IS,Amd,ISO 12100-2:2003/Amd 1:2009,"Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles — Amendment 1","Sécurité des machines — Notions fondamentales, principes généraux de conception — Partie 2: Principes techniques — Amendement 1",2009-05-13,1,['13.110'],ISO/TC 199,9599,,[51528],"['en','fr']",3,

27059,IS,,ISO 12103-1:1997,Road vehicles — Test dust for filter evaluation — Part 1: Arizona test dust,Véhicules routiers — Poussière pour l'essai des filtres — Partie 1: Poussière d'essai d'Arizona,1997-12-11,1,"['43.060.40','43.060.20']",ISO/TC 22/SC 34,9599,,[63386],['en'],9,

63386,IS,,ISO 12103-1:2016,Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust,Véhicules routiers — Poussière pour l'essai des filtres — Partie 1: Poussière d'essai d'Arizona,2016-03-08,2,"['43.060.40','43.060.20']",ISO/TC 22/SC 34,9599,[27059],[85949],['en'],14,<p>ISO 12103-1:2016 defines particle size distribution and chemical content limits involving four grades of test dust made from Arizona desert sand.</p>

32452,IS,,ISO 12106:2003,Metallic materials — Fatigue testing — Axial-strain-controlled method,Matériaux métalliques — Essais de fatigue — Méthode par déformation axiale contrôlée,2003-04-02,1,['77.040.10'],ISO/TC 164,9599,,[64687],"['en','fr']",35,"<p>ISO 12106:2003 specifies a method of testing uniaxially loaded specimens under strain control at constant amplitude, uniform temperature and a strain ratio of -1.</p><p>It can also be used as a guide for testing under other conditions.</p>"

32453,IS,,ISO 12107:2003,Metallic materials — Fatigue testing — Statistical planning and analysis of data,Matériaux métalliques — Essais de fatigue — Programmation et analyse statistique de données,2003-04-02,1,['77.040.10'],ISO/TC 164,9599,,[50242],"['en','fr']",26,"<p>ISO 12107:2003 presents methods for the experimental planning of fatigue testing and the statistical analysis of the resulting data. The purpose is to determine the fatigue properties of metallic materials with both a high degree of confidence and a practical number of specimens.</p><p>It provides a method for the analysis of fatigue life properties at a variety of stress levels using a relationship that can linearly approxim

32834,IS,,ISO 12108:2002,Metallic materials — Fatigue testing — Fatigue crack growth method,Matériaux métalliques — Essais de fatigue — Méthode d'essai de propagation de fissure en fatigue,2002-11-27,1,['77.040.10'],ISO/TC 164,9599,,[42815],"['en','fr']",39,"<p>ISO 12108 is intended to provide specifications for generation of fatigue crack growth rate data. Test results are expressed in terms of the fatigue crack growth rate as a function of crack-tip stress intensity factor range as defined by the theory of linear elastic fracture mechanics. </p><p>This International Standard describes a method of subjecting a precracked notched specimen to a cyclic force. The crack length is measured as a

42815,IS,,ISO 12108:2012,Metallic materials — Fatigue testing — Fatigue crack growth method,Matériaux métalliques — Essais de fatigue — Méthode d'essai de propagation de fissure en fatigue,2012-08-14,2,['77.040.10'],ISO/TC 164/SC 4,9599,[32834],[73809],['en'],43,"<p>ISO 12108:2012 describes tests for determining the fatigue crack growth rate from the fatigue crack growth threshold stress-intensity factor range to the onset of rapid, unstable fracture.</p><p>ISO 12108:2012 is primarily intended for use in evaluating isotropic metallic materials under predominantly linear-elastic stress conditions and with force applied only perpendicular to the crack plane (mode I stress condition), and with

5810,IS,,ISO 1211:1984,Milk — Determination of fat content — Gravimetric method (Reference method),Lait — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méthode de référence),1984-11-01,1,['67.100.10'],ISO/TC 34/SC 5,9599,[5809],[26906],"['en','fr']",8,

26906,IS,,ISO 1211:1999,Milk — Determination of fat content — Gravimetric method (Reference method),Lait — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méthode de référence),1999-12-16,2,['67.100.10'],ISO/TC 34/SC 5,9599,[5810],[51348],"['en','fr']",14,

51348,IS,,ISO 1211:2010,Milk — Determination of fat content — Gravimetric method (Reference method),Lait — Détermination de la teneur en matière grasse — Méthode gravimétrique (Méthode de référence),2010-05-21,3,['67.100.10'],ISO/TC 34/SC 5,9599,[26906],[75226],"['en','fr','ru']",18,"<p>ISO 1211|IDF 1:2010 specifies the reference method for the determination of the fat content of milk of good physicochemical quality.</p><p>The method is applicable to raw cow milk, raw sheep milk, raw goat milk, reduced fat milk, skimmed milk, chemically preserved milk, and processed liquid milk.</p><p>It is not applicable when greater accuracy is required for skimmed milk, e.g. to establish the operating eff

5811,IS,,ISO 1212:1976,Apples — Guide to cold storage,Pommes — Guide pour l'entreposage par réfrigération,1976-03-01,1,['67.080.10'],ISO/TC 34,9599,,[5812],"['en','fr']",6,

2416,IS,,ISO 12123:1996,Raw optical glass in bulk and preshaped forms — Bubbles and other inclusions — Test method and classification,Verre d'optique brut sous forme de bloc et préformé — Bulles et autres inclusions — Méthode d'essai et classification,1996-12-12,1,['81.040.10'],ISO/TC 172/SC 3,9599,,[45848],"['en','fr']",5,"<p>Relates to a test method for determining inclusions in raw optical glass. Gives a classification for raw optical glass in bulk form according to the type of inclusions determined by this test method, as well as a designation of a raw optical glass in preshaped form according to the type of the inclusions.</p>"

38781,IS,Amd,ISO 12123:1996/Amd 1:2005,Raw optical glass in bulk and preshaped forms — Bubbles and other inclusions — Test method and classification — Amendment 1,Verre d'optique brut sous forme de bloc et préformé — Bulles et autres inclusions — Méthode d'essai et classification — Amendement 1,2005-09-06,1,['81.040.10'],ISO/TC 172/SC 3,9599,,[45848],"['en','fr']",1,

45848,IS,,ISO 12123:2010,Optics and photonics — Specification of raw optical glass,Optique et photonique — Spécification d'un verre d'optique brut,2010-03-15,2,['81.040.10'],ISO/TC 172/SC 3,9599,"[38781,2416]",[69905],"['en','fr']",15,"<p>ISO 12123:2010 gives rules for the specification of raw optical glass. It serves as a complement to ISO 10110, which provides rules specifying finished optical elements. Since raw optical glass may be quite different in shape and size from the optical elements, its specification also differs from that of optical elements.</p><p>ISO 12123:2010 provides guidelines for the essential specification characteristics of raw optical glass in order to improve communi

21024,IS,,ISO 12125:1997,Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread — Product grades A and B,"Écrous hexagonaux à embase, autofreinés (à anneau non métallique), à filetage métrique à pas fin — Grades A et B",1997-11-06,1,['21.060.20'],ISO/TC 2/SC 12,9599,,[61528],"['en','fr']",4,