Withdrawn and superseded ISO standards — page 26 of 246

20480,IS,,ISO 11929-2:2000,Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 2: Fundamentals and application to counting measurements with the influence of sample treatment,"Détermination de la limite de détection et du seuil de décision des mesurages des rayonnements ionisants — Partie 2: Principes fondamentaux et application aux mesurages par comptage, avec l'influence du traitement d'échantillon",2000-06-29,1,['17.240'],ISO/TC 85/SC 2,9599,,[43810],"['en','fr']",16,

69580,IS,,ISO 11929-2:2019,"Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 2: Advanced applications","Détermination des limites caractéristiques (seuil de décision, limite de détection et extrémités de l'intervalle élargi) pour mesurages de rayonnements ionisants — Principes fondamentaux et applications — Partie 2: Applications avancées",2019-02-13,2,['17.240'],ISO/TC 85/SC 2,9599,[43810],[90840],"['en','fr']",40,"<p>The ISO 11929 series specifies a procedure, in the field of ionizing radiation metrology, for the calculation of the 'decision thres

43810,IS,,ISO 11929:2010,"Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation — Fundamentals and application","Détermination des limites caractéristiques (seuil de décision, limite de détection et extrémités de l'intervalle de confiance) pour mesurages de rayonnements ionisants — Principes fondamentaux et applications",2010-02-24,1,['17.240'],ISO/TC 85/SC 2,9599,"[30253,31070,20480,31071,25664,20481,39265,20479]","[69581,69579,71844,69580]","['en','fr']",60,"<p>ISO 11929:2010 specifies a procedure, in the field of ionizing radiation metrology, for the calculation of the 'decision thresho

20481,IS,,ISO 11929-3:2000,"Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 3: Fundamentals and application to counting measurements by high resolution gamma spectrometry, without the influence of sample treatment","Détermination de la limite de détection et du seuil de décision des mesurages de rayonnements ionisants — Partie 3: Principes fondamentaux et application aux mesurages par comptage, par spectrométrie gamma haute résolution, sans l'influence du traitement d'échantillon",2000-06-29,1,['17.240'],ISO/TC 85/SC 2,9599,,[43810],"['en','fr']",10,

69581,IS,,ISO 11929-3:2019,"Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 3: Applications to unfolding methods","Détermination des limites caractéristiques (seuil de décision, limite de détection et extrémités de l'intervalle élargi) pour mesurages de rayonnements ionisants — Principes fondamentaux et applications — Partie 3: Applications aux méthodes de déconvolution",2019-02-13,2,['17.240'],ISO/TC 85/SC 2,9599,[43810],[90842],"['en','fr']",39,"<p>The ISO 11929 series specifies a procedure, in the field of ionizing radiation metrology, for the c

25664,IS,,ISO 11929-4:2001,"Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 4: Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment","Détermination de la limite de détection et du seuil de décision des mesurages des rayonnements ionisants — Partie 4: Principes fondamentaux et leur application aux mesurages réalisés à l'aide d'ictomètres analogiques à échelle linéaire, sans l'influence du traitement d'échantillon",2001-06-21,1,['17.240'],ISO/TC 85/SC 2,9599,,[43810],"['en','fr']",10,

71844,IS,,ISO 11929-4:2020,"Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 4: Guidelines to applications","Détermination des limites caractéristiques (seuil de décision, limite de détection et limites de l'intervalle élargi) pour le mesurage des rayonnements ionisants — Principes fondamentaux et applications — Partie 4: Lignes directrices relatives aux applications",2020-09-15,2,['17.240'],ISO/TC 85/SC 2,9599,[43810],[84497],"['en','fr']",97,"<p>This document specifies a procedure, in the field of ionizing radiation metrology, for the calculation

39265,IS,,ISO 11929-5:2005,Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 5: Fundamentals and applications to counting measurements on filters during accumulation of radioactive material,Détermination de la limite de détection et du seuil de décision des mesurages de rayonnements ionisants — Partie 5: Principes fondamentaux et leurs applications aux mesurages par comptage réalisés sur filtres lors d'une accumulation de radioactivité,2005-02-09,1,['17.240'],ISO/TC 85/SC 2,9599,,[43810],"['en','fr']",32,"<p>ISO 11929-5:2004 specifies suitable statistical values which allow an assessment of the detection capabilities in ionizing radiation

30253,IS,,ISO 11929-6:2005,Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 6: Fundamentals and applications to measurements by use of transient mode,Détermination de la limite de détection et du seuil de décision des mesurages de rayonnements ionisants — Partie 6: Principes fondamentaux et leurs applications aux mesurages réalisés en mode transitoire,2005-02-09,1,['17.240'],ISO/TC 85/SC 2,9599,,[43810],"['en','fr']",16,"<p>ISO 11929-6:2005 specifies suitable statistical values which allow an assessment of the detection capabilities in ionizing radiation measurements by use of a transient mode. For this purpose, statistical methods are u

31070,IS,,ISO 11929-7:2005,Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 7: Fundamentals and general applications,Détermination de la limite de détection et seuil de décision des mesurages de rayonnements ionisants — Partie 7: Principes fondamentaux et leurs applications générales,2005-02-11,1,['17.240'],ISO/TC 85/SC 2,9599,,[43810],"['en','fr']",19,"<p>ISO 11929-7:2005 specifies suitable statistical values which allow an assessment of the detection capabilities in ionizing radiation measurements and of the physical effect quantified by the measurand. For this purpose, Bayesian statistical methods are used to specify characteristic lim

31071,IS,,ISO 11929-8:2005,Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 8: Fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment,Détermination de la limite de détection et du seuil de décision des mesurages de rayonnements ionisants — Partie 8: Principes fondamentaux et leur application à la déconvolution des spectres des mesurages de rayonnements ionisants négligeant l'influence de la préparation d'un échantillon,2005-02-11,1,['17.240'],ISO/TC 85/SC 2,9599,,[43810],"['en','fr']",20,"<p>ISO 11929-8:2005 specifies a method for determination of suitable statistical values which

5787,IS,,ISO 1193:1973,Butter triers,Sondes à beurre,1973-06-01,1,['67.100.20'],ISO/TC 34/SC 5,9599,,[4916],"['en','fr']",2,

51037,IS,,ISO 11930:2012,Cosmetics — Microbiology — Evaluation of the antimicrobial protection of a cosmetic product,Cosmétiques — Microbiologie — Évaluation de la protection antimicrobienne d'un produit cosmétique,2012-03-26,1,['07.100.40'],ISO/TC 217,9599,,[75058],"['en','fr']",23,"<p>ISO 11930:2012 comprises a preservation efficacy test and a procedure for evaluating the overall antimicrobial protection of a cosmetic product which is not considered low risk.</p><p>ISO 11930:2012 provides a procedure for interpretation of data generated by the preservation efficacy test or by the microbiological risk assessment, or both.</p>"

32146,IS,,ISO 11933-5:2001,Components for containment enclosures — Part 5: Penetrations for electrical and fluid circuits,Composants pour enceintes de confinement — Partie 5: Traversées de paroi pour circuits électriques et circuits de fluide,2001-09-27,1,['13.280'],ISO/TC 85/SC 2,9599,,[87276],"['en','fr']",52,

5788,IS,,ISO 1194:1973,Cheese triers,Sondes à fromage,1973-06-01,1,['67.100.30'],ISO/TC 34/SC 5,9599,,[4916],['en'],2,

20511,IS,,ISO 11943:1999,Hydraulic fluid power — On-line automatic particle-counting systems for liquids — Methods of calibration and validation,Transmissions hydrauliques — Systèmes de comptage automatique en ligne de particules en suspension dans les liquides — Méthode d'étalonnage et de validation,1999-08-12,1,['23.100.60'],ISO/TC 131/SC 6,9599,,[66514],"['en','fr']",30,

66514,IS,,ISO 11943:2018,Hydraulic fluid power — Online automatic particle-counting systems for liquids — Methods of calibration and validation,Transmissions hydrauliques — Systèmes de comptage automatique en ligne de particules en suspension dans les liquides — Méthode d'étalonnage et de validation,2018-05-07,2,['23.100.60'],ISO/TC 131/SC 6,9599,[20511],[79717],"['en','fr']",29,"<p>This document establishes methods to:</p><p>— validate equipment used to prepare secondary calibration suspensions for automatic particle counters;</p><p>— perform online secondary calibration of automatic particle counters;</p><p>— match two or more online particle counters, i.e. to co

20528,IS,,ISO 11944:1993,Round general use light gauge metal containers — Nominal diameters for cylindrical and tapered cans up to 10 000 ml capacity,Récipients métalliques légers ronds à usage général — Diamètres nominaux des boîtes cylindriques et tronconiques jusqu'à 10 000 ml de capacité,1993-12-09,1,['55.120'],ISO/TC 52,9599,,[31448],"['en','fr']",2,

1669,IS,,ISO 11948-2:1998,Urine-absorbing aids — Part 2: Determination of short-time liquid release (leakage) under conditions of light incontinence and low pressure,Aides pour absorption d'urine — Partie 2: Détermination des performances relatives aux dégagements de liquide (fuites) de courte durée dans des conditions d'incontinence légère et de basse pression,1998-03-26,1,['11.180.20'],ISO/TC 173/SC 3,9599,,[36159],"['en','fr']",5,

20548,IS,,ISO 11949:1995,Cold-reduced electrolytic tinplate,Fer-blanc électrolytique laminé à froid,1995-12-21,1,['77.140.50'],ISO/TC 17/SC 9,9599,"[5634,10989,10990,5633]",[59157],"['en','fr']",22,<p>Specifies requirements for single and double cold-reduced low-carbon mild steel for manufacture of electrolytic tinplate in form of sheets or coils.</p>

59157,IS,,ISO 11949:2016,Cold-reduced tinmill products — Electrolytic tinplate,Aciers pour emballage laminés à froid — Fer blanc électrolytique,2016-03-07,2,['77.140.50'],ISO/TC 17/SC 9,9599,[20548],[85098],['en'],35,"<p>ISO 11949:2016 specifies requirements for single and double cold-reduced low-carbon mild steel electrolytic tinplate in the form of sheets or coils.</p><p>Single cold-reduced tinplate is generally specified in nominal thicknesses that are multiples of 0,005 mm, from 0,150 mm up to and including 0,600 mm. Double cold-reduced tinplate is generally specified in nominal thicknesses that are multiples of 0,005 mm, from 0,100 mm up to and including 0,360 mm.</p><p>ISO 11949:2016 a

20549,IS,,ISO 11950:1995,Cold-reduced electrolytic chromium/chromium oxide-coated steel,Fer chromé électrolytique laminé à froid,1995-12-21,1,['77.140.50'],ISO/TC 17/SC 9,9599,"[15160,15158]",[59158],"['en','fr']",22,<p>Specifies requirements for single and double cold-reduced electrolytic chromium/chromium oxide-coated steel (ECCS) in the form of sheets or coils in nominal minimum widths of 500 mm.</p>

59158,IS,,ISO 11950:2016,Cold-reduced tinmill products — Electrolytic chromium/chromium oxide-coated steel,Aciers pour emballage laminés à froid — Fer chromé électrolytique,2016-03-08,2,['77.140.50'],ISO/TC 17/SC 9,9599,[20549],[85163],['en'],31,"<p>ISO 11950:2016 specifies requirements for single and double cold-reduced electrolytic chromium/chromium oxide-coated steel (ECCS) in the form of sheets or coils.</p><p>Single cold-reduced ECCS is generally specified in nominal thicknesses that are multiples of 0,005 mm, from 0,150 mm up to and including 0,600 mm. Double cold-reduced ECCS is generally specified in nominal thicknesses that are multiples of 0,005 mm, from 0,100 mm up to and includin

20550,IS,,ISO 11951:1995,Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated steel,Fer noir laminé à froid en bobines destiné à la fabrication de fer-blanc ou de fer chromé électrolytique,1995-12-21,1,['77.140.50'],ISO/TC 17/SC 9,9599,,[59159],"['en','fr']",11,<p>Specifies requirements for single and double cold-reduced blackplate in the form of coils in nominal minimum widths of 500 mm which are intended for manufacturing tinplate or electrolytic chromium/chromium oxide-coated steel in accordance with ISO 11949 or ISO 11950.</p>

59159,IS,,ISO 11951:2016,Cold-reduced tinmill products — Blackplate,Aciers pour emballage laminés à froid — Fer noir,2016-03-08,2,['77.140.50'],ISO/TC 17/SC 9,9599,[20550],[85164],['en'],21,"<p>ISO 11951:2016 specifies requirements for single and double cold-reduced blackplate in the form of coils which are intended for manufacturing electrolytic tinplate or electrolytic chromium/chromium oxide-coated steel (ECCS) in accordance with ISO 11949 or ISO 11950.</p><p>Single cold-reduced blackplate is generally specified in nominal thicknesses that are multiples of 0,005 mm from 0,150 mm up to and including 0,600 mm. Double cold-reduced blackplate is generally specified in nominal thicknesses that

51061,IS,,ISO 11952:2014,Surface chemical analysis — Scanning-probe microscopy — Determination of geometric quantities using SPM: Calibration of measuring systems,Analyse chimique des surfaces — Microscopie à sonde à balayage — Détermination des quantités géométriques en utilisant des microscopes à sonde à balayage: Étalonnage des systèmes de mesure,2014-05-12,1,['71.040.40'],ISO/TC 201/SC 9,9599,,[67552],['en'],58,"<p>ISO 11952:2014 specifies methods for characterizing and calibrating the scan axes of scanning-probe microscopes for measuring geometric quantities at the highest level. It is applicable to those providing further calibrations and is not intended for general industry use, where

21346,IS,,ISO 11960:1996,Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells,Industries du pétrole et du gaz naturel — Tubes d'acier utilisés comme tubes de cuvelage ou de production pour les puits,1996-06-27,1,"['77.140.75','75.180.10']",ISO/TC 67/SC 5,9599,[7630],[29882],"['en','fr']",87,"<p>Specifies the technical delivery conditions for steel pipes (casing, tubing for wells), connectors, couplings and thread protectors. Theading requirements are not considered. Dimensional requirements on threads are given in ISO 10422. Replaces ISO 2645:1975.</p>"

29882,IS,,ISO 11960:2001,Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells,Industries du pétrole et du gaz naturel — Tubes d'acier utilisés comme cuvelage ou tubes de production dans les puits,2001-11-08,2,"['77.140.75','75.180.10']",ISO/TC 67/SC 5,9599,[21346],[36332],['en'],235,"<p>La présente Norme Internationale est applicable aux assemblages suivants conformément à l'ISO 10422 ou à l'API Spec 5B : - tube de cuvelage à filetage rond court (STC) - tube de cuvelage à filetage rond long (LC) - tube de cuvelage à filetage Buttress (BC) - tubes de cuvelage extreme-line (XC) ; - tube de production sans refoulement (NU) - tube de production à refoule

37644,IS,Cor,ISO 11960:2001/Cor 1:2002,Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells — Technical Corrigendum 1,Industries du pétrole et du gaz naturel — Tubes d'acier utilisés comme cuvelage ou tubes de production dans les puits — Rectificatif technique 1,2002-11-11,2,"['77.140.75','75.180.10']",ISO/TC 67/SC 5,9599,,[36332],['en'],4,

36332,IS,,ISO 11960:2004,Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells,Industries du pétrole et du gaz naturel — Tubes d'acier utilisés comme cuvelage ou tubes de production dans les puits,2004-12-15,3,"['77.140.75','75.180.10']",ISO/TC 67/SC 5,9599,"[37644,29882]",[46587],['en'],291,"<p>ISO 11960:2004 specifies the technical delivery conditions for steel pipes (casing, tubing, plain end casing liners and pup joints), coupling stock and accessories and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of ISO 11960:2004. The requirements that define different levels of stan

44290,IS,Cor,ISO 11960:2004/Cor 1:2006,Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells — Technical Corrigendum 1,Industries du pétrole et du gaz naturel — Tubes d'acier utilisés comme cuvelage ou tubes de production dans les puits — Rectificatif technique 1,2006-05-16,3,"['77.140.75','75.180.10']",ISO/TC 67/SC 5,9599,,[46587],['en'],2,

46587,IS,,ISO 11960:2011,Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells,Industries du pétrole et du gaz naturel — Tubes d'acier utilisés comme cuvelage ou tubes de production dans les puits,2011-06-16,4,"['77.140.75','75.180.10']",ISO/TC 67/SC 5,9599,"[44290,36332]",[64101],['en'],269,"<p>ISO 11960:2010 specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three product specification levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of ISO 11960:2010. The requirements that define different levels of sta

64101,IS,,ISO 11960:2014,Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells,Industries du pétrole et du gaz naturel — Tubes d'acier utilisés comme cuvelage ou tubes de production dans les puits,2014-01-15,5,"['77.140.75','75.180.10']",ISO/TC 67/SC 5,9599,[46587],[75278],"['en','fr']",264,"<p>ISO 11960:2014 specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of ISO 11960:2014. The requirements that define different levels of stan

22602,IS,,ISO 11961:1996,Petroleum and natural gas industries — Steel pipes for use as drill pipe — Specification,Industries du pétrole et du gaz naturel — Tubes d'acier pour tiges de forage — Spécifications,1996-10-31,1,"['77.140.75','75.180.10']",ISO/TC 67/SC 5,9599,,"[29888,44445]","['en','fr']",25,"<p>Specifies the technical delivery conditions for steel drill pipes. Describes the group 1, all grade E pipes, and group 3, all drill pipes in high strength grades X95, G105 and S135.</p>"

44445,IS,,ISO 11961:2008,Petroleum and natural gas industries — Steel drill pipe,Industries du pétrole et du gaz naturel — Tiges de forage en acier,2008-10-22,2,"['77.140.75','75.180.10']",ISO/TC 67/SC 5,9599,[22602],[73517],"['en','fr']",112,"<p>ISO 11961:2008 specifies the technical delivery conditions for steel drill pipes with upset pipe body ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas industries for three product specification levels (PSL-1, PSL-2 and PSL-3). The requirements for PSL-1 form the basis of this ISO 11961:2008 but those that define different levels of standard technical requirements for PSL-2 and PSL-3 are also giv

53706,IS,Cor,ISO 11961:2008/Cor 1:2009,Petroleum and natural gas industries — Steel drill pipe — Technical Corrigendum 1,Industries du pétrole et du gaz naturel — Tiges de forage en acier — Rectificatif technique 1,2009-02-26,2,"['77.140.75','75.180.10']",ISO/TC 67/SC 5,9599,,[73517],['en'],2,

20659,IS,,ISO 11963:1995,"Plastics — Polycarbonate sheets — Types, dimensions and characteristics","Plastiques — Feuilles en polycarbonate — Types, dimensions et caractéristiques",1995-04-13,1,['83.140.10'],ISO/TC 61/SC 11,9599,,"[43622,56232]","['en','fr']",7,"<p>Specifies the requirements for solid, flat extruded sheets of polycarbonate (PC) for general applications. Applies specifically to sheets made of poly-(p,p'-isopropylidenediphenyl carbonate). The sheets may be coloured or colourless, and they may be transparent, translucent or opaque. The sheets may also have a special weather-protective layer on one or both surfaces. Applies only to thicknesses equal to or greater than 1,5 mm.</p>

56232,IS,,ISO 11963:2012,"Plastics — Polycarbonate sheets — Types, dimensions and characteristics","Plastiques — Plaques en polycarbonate — Types, dimensions et caractéristiques",2012-11-08,2,['83.140.10'],ISO/TC 61/SC 11,9599,[20659],[75510],"['en','fr']",9,"<p>ISO 11963:2012 specifies the requirements for solid, flat extruded sheets of polycarbonate (PC) for general applications. It applies specifically to sheets made of poly<i>(p,p</i>′-isopropylidenediphenyl carbonate). The sheets may be coloured or colourless, and they may be transparent, translucent or opaque. The sheets may also have a special weather-protective layer on one or both surfaces.</p><p>ISO 11963:2012 applies only to thick

20600,IS,,ISO 11969:1996,Water quality — Determination of arsenic — Atomic absorption spectrometric method (hydride technique),Qualité de l'eau — Dosage de l'arsenic — Méthode par spectrométrie d'absorption atomique (technique hydrure),1996-07-11,1,['13.060.50'],ISO/TC 147/SC 2,9599,,"[55220,36251]","['en','fr']",8,

1093,IS,,ISO 11970:2001,Specification and approval of welding procedures for production welding of steel castings,Descriptif et qualification d'un mode opératoire de soudage pour le soudage de production sur aciers moulés,2001-01-25,1,"['25.160.10','77.140.80']",ISO/TC 17/SC 11,9599,,[59270],"['en','fr']",15,

59270,IS,,ISO 11970:2016,Specification and qualification of welding procedures for production welding of steel castings,Descriptif et qualification de modes opératoires de soudage pour le soudage de production des aciers moulés,2016-03-07,2,"['25.160.10','77.140.80']",ISO/TC 17/SC 11,9599,[1093],[84906],"['en','fr']",16,"<p>ISO 11970:2016 specifies how a welding procedure specification (WPS) for production welding of steel castings is qualified.</p><p>It defines the conditions for the execution of welding procedure qualification tests and the limits of validity of a qualified welding procedure for all practical welding operations within the range of essential variables.</p><p>Tests are inten

1210,IS,,ISO 11971:1997,Visual examination of surface quality of steel castings,Examen visuel de l'état de surface des pièces moulées en acier,1997-12-18,1,"['77.040.20','77.140.80']",ISO/TC 17/SC 11,9599,,[38864],"['en','fr']",4,

38864,IS,,ISO 11971:2008,Steel and iron castings — Visual examination of surface quality,Pièces moulées en acier ou en fonte — Examen visuel de l'état de surface,2008-08-18,2,"['77.040.20','77.140.80']",ISO/TC 17/SC 11,9599,[1210],[76567],"['en','fr','ru']",3,<p>ISO 11971:2008 covers the acceptance criteria for the surface inspection of steel and iron castings by visual examination.</p>

1246,IS,,ISO 11972:1998,Corrosion-resistant cast steels for general applications,Aciers moulés résistant à la corrosion pour applications courantes,1998-02-19,1,"['77.140.80','77.140.20']",ISO/TC 17/SC 11,9599,,[59271],"['en','fr']",5,

59271,IS,,ISO 11972:2015,Corrosion-resistant cast steels for general applications,Aciers moulés résistant à la corrosion pour applications courantes,2015-09-08,2,"['77.140.80','77.140.20']",ISO/TC 17/SC 11,9599,[1246],[84180],['en'],7,<p>ISO 11972:2015 specifies cast steels for general corrosion-resistant applications. The grades covered by this International Standard represent types of alloy steel castings suitable for broad ranges of application which are intended for a wide variety of corrosion applications.</p><p>NOTE Annex A gives information on ISO grade designation and available UNS numbers which are similar to the ISO grade designation.</p>

1282,IS,,ISO 11973:1999,Heat-resistant cast steels and alloys for general applications,Aciers et alliages moulés réfractaires destinés à des applications générales,1999-12-09,1,"['77.140.80','77.140.20']",ISO/TC 17/SC 11,9599,,[59272],"['en','fr']",5,

59272,IS,,ISO 11973:2015,Heat-resistant cast steels and alloys for general applications,Aciers et alliages moulés réfractaires destinés à des applications générales,2015-09-08,2,"['77.140.80','77.140.20']",ISO/TC 17/SC 11,9599,[1282],[84179],['en'],6,<p>ISO 11973:2015 specifies chemical composition and mechanical properties of cast steels and alloys for heat-resistant service.</p>

3503,IS,,ISO 11978:2000,Ophthalmic optics — Contact lenses and contact lens care products — Information supplied by the manufacturer,Optique ophtalmique — Lentilles de contact et produits d'entretien des lentilles de contact — Informations à fournir par le fabricant,2000-03-23,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[61822],"['en','fr']",7,

61822,IS,,ISO 11978:2014,Ophthalmic optics — Contact lenses and contact lens care products — Labelling,Optique ophtalmique — Lentilles de contact et produits d'entretien des lentilles de contact — Étiquetage,2014-09-24,2,['11.040.70'],ISO/TC 172/SC 7,9599,[3503],[72603],"['en','fr','ru']",7,<p>ISO 11978:2014 specifies the information to be provided by the manufacturer of contact lenses and contact lens care products to ensure the correct and safe use of these devices and their accessories by both types of users of contact lenses: the eye care professional and the contact lens wearer.</p>

24541,IS,,ISO 11979-1:1999,Ophthalmic implants — Intraocular lenses — Part 1: Vocabulary,Implants ophtalmiques — Lentilles intraoculaires — Partie 1: Vocabulaire,1999-12-09,1,"['11.040.70','01.040.11']",ISO/TC 172/SC 7,9599,,[41470],"['en','fr']",10,

41470,IS,,ISO 11979-1:2006,Ophthalmic implants — Intraocular lenses — Part 1: Vocabulary,Implants ophtalmiques — Lentilles intraoculaires — Partie 1: Vocabulaire,2006-07-12,2,"['11.040.70','01.040.11']",ISO/TC 172/SC 7,9599,[24541],[55683],"['en','fr']",12,<p>ISO 11979-1:2006 defines terms applicable to intraocular lenses and to the methods used to evaluate them.</p>

55683,IS,,ISO 11979-1:2012,Ophthalmic implants — Intraocular lenses — Part 1: Vocabulary,Implants ophtalmiques — Lentilles intraoculaires — Partie 1: Vocabulaire,2012-09-17,3,"['11.040.70','01.040.11']",ISO/TC 172/SC 7,9599,[41470],[72614],"['en','fr']",12,

72614,IS,,ISO 11979-1:2018,Ophthalmic implants — Intraocular lenses — Part 1: Vocabulary,Implants ophtalmiques — Lentilles intraoculaires — Partie 1: Vocabulaire,2018-11-14,4,"['11.040.70','01.040.11']",ISO/TC 172/SC 7,9599,[55683],[79921],"['en','fr']",10,"<p>This document defines terms applicable to intraocular lenses, and to the methods used to evaluate them.</p><p>NOTE Terms are listed in the alphabetical order of the English terms in the English version of this document.</p>"

41265,IS,,ISO 11979-10:2006,Ophthalmic implants — Intraocular lenses — Part 10: Phakic intraocular lenses,Implants ophtalmiques — Lentilles intraoculaires — Partie 10: Lentilles intraoculaires phaques,2006-08-10,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[69036],"['en','fr']",18,<p>ISO 11979-10:2006 is applicable to any intraocular lens (IOL) whose primary indication is the modification of the refractive power of a phakic eye but excludes phakic IOLs (PIOLs) that utilize multifocal or other simultaneous vision optics to address presbyopic loss of accommodation and PIOLs that correct astigmatism.</p><p>ISO 11979-10:2006 addresses specific requirements for PIOLs not addressed in the other parts of

62174,IS,Amd,ISO 11979-10:2006/Amd 1:2014,Ophthalmic implants — Intraocular lenses — Part 10: Phakic intraocular lenses — Amendment 1,Implants ophtalmiques — Lentilles intraoculaires — Partie 10: Lentilles intraoculaires phaques — Amendement 1,2014-07-30,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[69036],"['en','fr']",1,

24542,IS,,ISO 11979-2:1999,Ophthalmic implants — Intraocular lenses — Part 2: Optical properties and test methods,Implants ophtalmiques — Lentilles intraoculaires — Partie 2: Propriétés optiques et méthodes d'essai,1999-12-16,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[55682],"['en','fr']",20,

39013,IS,Cor,ISO 11979-2:1999/Cor 1:2003,Ophthalmic implants — Intraocular lenses — Part 2: Optical properties and test methods — Technical Corrigendum 1,Implants ophtalmiques — Lentilles intraoculaires — Partie 2: Propriétés optiques et méthodes d'essai — Rectificatif technique 1,2003-11-04,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[55682],"['en','fr']",1,

55682,IS,,ISO 11979-2:2014,Ophthalmic implants — Intraocular lenses — Part 2: Optical properties and test methods,Implants ophtalmiques — Lentilles intraoculaires — Partie 2: Propriétés optiques et méthodes d'essai,2014-08-12,2,['11.040.70'],ISO/TC 172/SC 7,9599,"[39013,24542]","[79688,86607]","['en','fr']",22,"<p>ISO 11979-2:2014 specifies requirements and test methods for certain optical properties of intraocular lenses (IOLs) with any of spherical, aspheric, monofocal, toric, multifocal, and/or accommodative optics. The generic descriptor ?IOL' used throughout ISO 11979-2:2014 also includes phakic intraocular lenses (PIOL).</p>"

24543,IS,,ISO 11979-3:1999,Ophthalmic implants — Intraocular lenses — Part 3: Mechanical properties and test methods,Implants ophtalmiques — Lentilles intraoculaires — Partie 3: Propriétés mécaniques et méthodes d'essai,1999-10-14,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[36411],"['en','fr']",37,

36411,IS,,ISO 11979-3:2006,Ophthalmic implants — Intraocular lenses — Part 3: Mechanical properties and test methods,Implants ophtalmiques — Lentilles intraoculaires — Partie 3: Propriétés mécaniques et méthodes d'essai,2006-05-05,2,['11.040.70'],ISO/TC 172/SC 7,9599,[24543],[55681],"['en','fr']",30,"<p>ISO 11979-3:2006 specifies requirements and test methods for certain mechanical properties of intraocular lenses (IOLs).</p><p>It is applicable to all types of IOLs intended for implantation in the anterior segment of the human eye, excluding corneal implants, provided that the test method is appropriate to the particular IOL design.</p>"

33034,IS,,ISO 11979-4:2000,Ophthalmic implants — Intraocular lenses — Part 4: Labelling and information,Implants ophtalmiques — Lentilles intraoculaires — Partie 4: Étiquetage et informations,2000-06-08,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[44163],"['en','fr']",6,

44163,IS,,ISO 11979-4:2008,Ophthalmic implants — Intraocular lenses — Part 4: Labelling and information,Implants ophtalmiques — Lentilles intraoculaires — Partie 4: Étiquetage et informations,2008-11-17,2,['11.040.70'],ISO/TC 172/SC 7,9599,[33034],[86099],"['en','fr']",5,<p>ISO 11979-4:2008 specifies the labelling requirements for intraocular lenses (IOLs) and the information to be provided within or on the packaging.</p>

55580,IS,Amd,ISO 11979-4:2008/Amd 1:2012,Ophthalmic implants — Intraocular lenses — Part 4: Labelling and information — Amendment 1,Implants ophtalmiques — Lentilles intraoculaires — Partie 4: Étiquetage et informations — Amendement 1,2012-09-20,2,['11.040.70'],ISO/TC 172/SC 7,9599,,[86099],"['en','fr']",1,

24544,IS,,ISO 11979-5:1999,Ophthalmic implants — Intraocular lenses — Part 5: Biocompatibility,Implants ophtalmiques — Lentilles intraoculaires — Partie 5: Biocompatibilité,1999-11-11,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[36410],['en'],14,

36410,IS,,ISO 11979-5:2006,Ophthalmic implants — Intraocular lenses — Part 5: Biocompatibility,Implants ophtalmiques — Lentilles intraoculaires — Partie 5: Biocompatibilité,2006-06-09,2,['11.040.70'],ISO/TC 172/SC 7,9599,[24544],[72602],"['en','fr']",24,<p>ISO 11979-5:2006 specifies particular requirements for the biocompatibility evaluation of materials for intraocular lenses (IOLs) including the processing conditions to produce them. These requirements include evaluation of physicochemical properties that are relevant to biocompatibility. It also gives guidance on conducting an ocular implantation test.</p>

34064,IS,,ISO 11979-6:2002,Ophthalmic implants — Intraocular lenses — Part 6: Shelf-life and transport stability,Implants ophtalmiques — Lentilles intraoculaires — Partie 6: Durée de conservation et stabilité pendant le transport,2002-06-13,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[39260],"['en','fr']",12,<p>This part of ISO 11979 describes tests by which the shelf-life of sterile intraocular lenses (IOLs) in their final packaging can be determined. These tests include procedures to establish the stability of IOLs in distribution and storage.</p>

39260,IS,,ISO 11979-6:2007,Ophthalmic implants — Intraocular lenses — Part 6: Shelf-life and transport stability,Implants ophtalmiques — Lentilles intraoculaires — Partie 6: Durée de conservation et stabilité pendant le transport,2007-07-04,2,['11.040.70'],ISO/TC 172/SC 7,9599,[34064],[60573],"['en','fr']",10,<p>ISO 11979-6:2007 specifies tests by which the shelf-life of sterile intraocular lenses (IOLs) in their final packaging can be determined. These tests include procedures to establish the stability of IOLs in distribution and storage.</p>

24546,IS,,ISO 11979-7:2001,Ophthalmic implants — Intraocular lenses — Part 7: Clinical investigations,Implants ophtalmiques — Lentilles intraoculaires — Partie 7: Investigations cliniques,2001-04-19,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[36409],"['en','fr']",23,

36409,IS,,ISO 11979-7:2006,Ophthalmic implants — Intraocular lenses — Part 7: Clinical investigations,Implants ophtalmiques — Lentilles intraoculaires — Partie 7: Investigations cliniques,2006-05-05,2,['11.040.70'],ISO/TC 172/SC 7,9599,[24546],[55684],"['en','fr']",18,<p>ISO 11979-7:2006 specifies particular requirements for clinical investigations for posterior and anterior chamber monofocal intraocular lenses (IOLs) for the correction of aphakia.</p>

55581,IS,Amd,ISO 11979-7:2006/Amd 1:2012,Ophthalmic implants — Intraocular lenses — Part 7: Clinical investigations — Amendment 1,Implants ophtalmiques — Lentilles intraoculaires — Partie 7: Investigations cliniques — Amendement 1,2012-01-20,2,['11.040.70'],ISO/TC 172/SC 7,9599,,[55684],"['en','fr']",4,

55684,IS,,ISO 11979-7:2014,Ophthalmic implants — Intraocular lenses — Part 7: Clinical investigations,Implants ophtalmiques — Lentilles intraoculaires — Partie 7: Investigations cliniques,2014-08-20,3,['11.040.70'],ISO/TC 172/SC 7,9599,"[55581,36409]",[69038],"['en','fr']",41,<p>ISO 11979-7:2014 specifies particular requirements for clinical investigations for posterior and anterior chamber intraocular lenses (IOLs). </p>

69038,IS,,ISO 11979-7:2018,Ophthalmic implants — Intraocular lenses — Part 7: Clinical investigations of intraocular lenses for the correction of aphakia,Implants ophtalmiques — Lentilles intraoculaires — Partie 7: Investigations cliniques de lentilles intraoculaires pour la correction de l'aphakie,2018-03-23,4,['11.040.70'],ISO/TC 172/SC 7,9599,"[62173,40919,55684]",[79689],"['en','fr']",42,<p>ISO 11979-7:2018 specifies the particular requirements for the clinical investigations of intraocular lenses that are implanted in the eye in order to correct aphakia.</p>

24547,IS,,ISO 11979-8:1999,Ophthalmic implants — Intraocular lenses — Part 8: Fundamental requirements,Implants ophtalmiques — Lentilles intraoculaires — Partie 8: Exigences fondamentales,1999-08-19,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[36408],"['en','fr']",4,

39014,IS,Cor,ISO 11979-8:1999/Cor 1:2003,Ophthalmic implants — Intraocular lenses — Part 8: Fundamental requirements — Technical Corrigendum 1,Implants ophtalmiques — Lentilles intraoculaires — Partie 8: Exigences fondamentales — Rectificatif technique 1,2003-11-24,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[36408],"['en','fr']",1,

36408,IS,,ISO 11979-8:2006,Ophthalmic implants — Intraocular lenses — Part 8: Fundamental requirements,Implants ophtalmiques — Lentilles intraoculaires — Partie 8: Exigences fondamentales,2006-06-21,2,['11.040.70'],ISO/TC 172/SC 7,9599,"[24547,39014]",[69035],"['en','fr']",4,"<p>11979-8:2006 specifies fundamental requirements for all types of intraocular lenses intended for surgical implantation into the anterior segment of the human eye, excluding corneal implants and transplants.</p>"

53489,IS,Amd,ISO 11979-8:2006/Amd 1:2011,Ophthalmic implants — Intraocular lenses — Part 8: Fundamental requirements — Amendment 1,Implants ophtalmiques — Lentilles intraoculaires — Partie 8: Exigences fondamentales — Amendement 1,2011-05-05,2,['11.040.70'],ISO/TC 172/SC 7,9599,,[69035],"['en','fr']",1,

40919,IS,,ISO 11979-9:2006,Ophthalmic implants — Intraocular lenses — Part 9: Multifocal intraocular lenses,Implants ophtalmiques — Lentilles intraoculaires — Partie 9: Lentilles intraoculaires multifocales,2006-09-04,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[69038],"['en','fr']",20,<p>ISO 11979-9:2006 is applicable to any intraocular lens whose optic provides two or more rotationally symmetric powers and whose primary indication is the correction of aphakia with the added benefit of useful vision at more than one distance (e.g. far and near).</p><p>The term 'near vision' as used in ISO 11979-9:2006 includes useful vision at a distance of claimed benefit; e.g. near and/or intermediate distances

62173,IS,Amd,ISO 11979-9:2006/Amd 1:2014,Ophthalmic implants — Intraocular lenses — Part 9: Multifocal intraocular lenses — Amendment 1,Implants ophtalmiques — Lentilles intraoculaires — Partie 9: Lentilles intraoculaires multifocales — Amendement 1,2014-08-06,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[69038],"['en','fr']",1,

3471,IS,,ISO 11980:1997,Ophthalmic optics — Contact lenses and contact lens care products — Guidance for clinical investigations,Optique ophtalmique — Lentilles de contact et produits d'entretien pour lentilles de contact — Lignes directrices pour les investigations cliniques,1997-12-11,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[39143],"['en','fr']",18,

30274,IS,Cor,ISO 11980:1997/Cor 1:1998,Ophthalmic optics — Contact lenses and contact lens care products — Guidance for clinical investigations — Technical Corrigendum 1,Optique ophtalmique — Lentilles de contact et produits d'entretien pour lentilles de contact — Lignes directrices pour les investigations cliniques — Rectificatif technique 1,1998-04-02,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[39143],['fr'],,

39143,IS,,ISO 11980:2009,Ophthalmic optics — Contact lenses and contact lens care products — Guidance for clinical investigations,Optique ophtalmique — Lentilles de contact et produits d'entretien pour lentilles de contact — Directives pour les investigations cliniques,2009-10-13,2,['11.040.70'],ISO/TC 172/SC 7,9599,"[30274,3471]",[61825],"['en','fr']",28,<p>ISO 11980:2009 gives guidelines for the clinical investigation of the safety and performance of contact lenses and contact lens care products.</p>

61825,IS,,ISO 11980:2012,Ophthalmic optics — Contact lenses and contact lens care products — Guidance for clinical investigations,Optique ophtalmique — Lentilles de contact et produits d'entretien pour lentilles de contact — Directives pour les investigations cliniques,2012-11-14,3,['11.040.70'],ISO/TC 172/SC 7,9599,[39143],"[85837,75918]","['en','fr']",26,<p>ISO 11980:2012 gives guidelines for the clinical investigation of the safety and performance of contact lenses and contact lens care products.</p>

3459,IS,,ISO 11981:1999,Ophthalmic optics — Contact lenses and contact lens care products — Determination of physical compatibility of contact lens care products with contact lenses,Optique ophtalmique — Lentilles de contact et produits d'entretien des lentilles de contact — Détermination de la compatibilité physique des produits d'entretien des lentilles de contact avec les lentilles de contact,1999-06-17,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[52491],"['en','fr']",7,

42004,IS,Cor,ISO 11981:1999/Cor 1:2005,Ophthalmic optics — Contact lenses and contact lens care products — Determination of physical compatibility of contact lens care products with contact lenses — Technical Corrigendum 1,Optique ophtalmique — Lentilles de contact et produits d'entretien des lentilles de contact — Détermination de la compatibilité physique des produits d'entretien des lentilles de contact avec les lentilles de contact — Rectificatif technique 1,2005-04-25,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[52491],"['en','fr']",2,

52491,IS,,ISO 11981:2009,Ophthalmic optics — Contact lenses and contact lens care products — Determination of physical compatibility of contact lens care products with contact lenses,Optique ophtalmique — Lentilles de contact et produits d'entretien des lentilles de contact — Détermination de la compatibilité physique des produits d'entretien des lentilles de contact avec les lentilles de contact,2009-06-24,2,['11.040.70'],ISO/TC 172/SC 7,9599,"[42004,3459]",[69040],"['en','fr']",5,<p>ISO 11981:2009 describes the general procedure and performance criteria for assessing the physical compatibility of contact lens care products with contact lenses and for determining whether the observed change

2861,IS,,ISO 11984:1999,Ophthalmic optics — Contact lenses — Determination of rigid lens flexure and breakage,Optique ophtalmique — Lentilles de contact — Détermination de la flexion et de la rupture des lentilles de contact rigides,1999-12-02,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[34480],"['en','fr']",8,

3104,IS,,ISO 11986:1999,Ophthalmic optics — Contact lenses and contact lens care products — Guidelines for determination of preservative uptake and release,Optique ophtalmique — Lentilles de contact et produits d'entretien pour lentilles de contact — Lignes directrices pour la détermination de l'absorption/adsorption et le relargage des conservateurs,1999-05-13,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[51086],"['en','fr']",4,

51086,IS,,ISO 11986:2010,Ophthalmic optics — Contact lenses and contact lens care products — Determination of preservative uptake and release,Optique ophtalmique — Lentilles de contact et produits d'entretien pour lentilles de contact — Détermination de l'absorption/adsorption et du relargage des conservateurs,2010-10-21,2,['11.040.70'],ISO/TC 172/SC 7,9599,[3104],[72294],"['en','fr']",5,"<p>ISO 11986:2010 provides general procedures for the selection of methods, preparation of samples, and conduct of testing for the uptake and release of preservatives from contact lenses.</p>"

72294,IS,,ISO 11986:2017,Ophthalmic optics — Contact lenses and contact lens care products — Determination of preservative uptake and release,Optique ophtalmique — Lentilles de contact et produits d'entretien pour lentilles de contact — Détermination de l'absorption/adsorption et du relargage des conservateurs,2017-11-30,3,['11.040.70'],ISO/TC 172/SC 7,9599,[51086],[90146],"['en','fr']",6,"<p>ISO 11986:2017 provides general procedures for the selection of methods, preparation of samples, and the conduct of testing for the uptake and release of preservatives from contact lenses.</p><p>NOTE 1 Due to the manifest difficulties of reproducibility when coating contact lenses with mineral and or

3176,IS,,ISO 11987:1997,Ophtalmic optics — Contact lenses — Determination of shelf-life,Optique ophtalmique — Lentilles de contact — Détermination de la durée de conservation,1997-11-20,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[51074],"['en','fr']",6,

30275,IS,Cor,ISO 11987:1997/Cor 1:1998,Ophtalmic optics — Contact lenses — Determination of shelf-life — Technical Corrigendum 1,Optique ophtalmique — Lentilles de contact — Détermination de la durée de conservation — Rectificatif technique 1,1998-04-02,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[51074],['fr'],,

51074,IS,,ISO 11987:2012,Ophthalmic optics — Contact lenses — Determination of shelf-life,Optique ophtalmique — Lentilles de contact — Détermination de la durée de conservation,2012-07-13,2,['11.040.70'],ISO/TC 172/SC 7,9599,"[3176,30275]",[90147],"['en','fr']",6,<p>ISO 11987:2012 specifies test procedures for determining the stability of contact lenses once placed in their final packaging during storage and distribution.</p>

45685,IS,,ISO 11990-1:2011,Lasers and laser-related equipment — Determination of laser resistance of tracheal tubes — Part 1: Tracheal tube shaft,Lasers et équipements associés aux lasers — Détermination de la résistance au laser des tubes trachéaux — Partie 1: Axe des tubes trachéaux,2011-07-28,1,"['31.260','11.040.10']",ISO/TC 172/SC 9,9599,[33112],[69226],"['en','fr']",10,"<p>ISO 11990-1:2011 specifies a method of testing the continuous wave (cw) resistance of the shaft of a tracheal tube designed to resist ignition by a laser. It is not applicable to other components of the system, such as the inflation system and cuff, which are defined in ISO 11990-2:2010. </p><p>ISO 11990-1:2011 can b

20618,IS,,ISO 11990:1999,Optics and optical instruments — Lasers and laser-related equipment — Determination of laser resistance of tracheal tube shafts,Optique et instruments d'optique — Lasers et équipements associés aux lasers — Détermination de la résistance au laser des tubes trachéaux,1999-07-22,1,"['11.040.99','31.260']",ISO/TC 172/SC 9,9599,,[33112],"['en','fr']",9,

45686,IS,,ISO 11990-2:2010,Lasers and laser-related equipment — Determination of laser resistance of tracheal tubes — Part 2: Tracheal tube cuffs,Lasers et équipements associés aux lasers — Détermination de la résistance au laser des tubes trachéaux — Partie 2: Ballonnet de tubes trachéaux,2010-07-09,1,"['31.260','11.040.10']",ISO/TC 172/SC 9,9599,,[69226],"['en','fr']",11,"<p>ISO 11990‑2:2010 specifies a method of testing the continuous wave (cw) resistance of the cuff regions of tracheal tubes designed to resist ignition by a laser. Other components of the system, such as the inflation system and shaft are outside the scope of ISO 11990‑2:2010.</p>"

33112,IS,,ISO 11990:2003,Optics and optical instruments — Lasers and laser-related equipment — Determination of laser resistance of tracheal tube shafts,Optique et instruments d'optique — Lasers et équipements associés aux lasers — Détermination de la résistance au laser des tubes trachéaux,2003-04-08,2,"['31.260','11.040.10']",ISO/TC 172/SC 9,9599,[20618],[45685],"['en','fr']",10,"<p>ISO 11990:2003 specifies a method of testing the continuous wave (cw) laser resistance of the shaft of a tracheal tube. Other components of the system, such as the inflation system and cuff, are outside the scope of ISO 11990:2003. </p><p>The specified test method shall be used to measure and describe the prope

20661,IS,,ISO 11992-1:1998,Road vehicles — Electrical connections between towing and towed vehicles — Interchange of digital information — Part 1: Physical layer and data link layer,Véhicules routiers — Connexions électriques entre véhicules tracteurs et véhicules tractés — Échange de données numériques — Partie 1: Couche physique et couche liaison de données,1998-03-26,1,"['43.040.10','43.040.15']",ISO/TC 22,9599,,[33467],['en'],18,

33467,IS,,ISO 11992-1:2003,Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 1: Physical and data-link layers,Véhicules routiers — Échange d'informations numériques sur les connexions électriques entre véhicules tracteurs et véhicules tractés — Partie 1: Couche physique et couche de liaison de données,2003-04-28,2,['43.040.15'],ISO/TC 22/SC 31,9599,[20661],[68376],"['en','fr']",22,"<p>ISO 11992-1:2003 specifies the interchange of digital information between road vehicles with a maximum authorized total mass greater than 3 500 kg, and towed vehicles, including communication between towed vehicles in terms of parameters and re

23819,IS,,ISO 11992-2:1998,Road vehicles — Electrical connections between towing and towed vehicles — Interchange of digital information — Part 2: Application layer for braking equipment,Véhicules routiers — Connexions électriques entre véhicules tracteurs et véhicules tractés — Échange de données numériques — Partie 2: Couche application pour l'équipement de freinage,1998-03-26,1,['43.040.15'],ISO/TC 22,9599,,[33469],['en'],22,

33469,IS,,ISO 11992-2:2003,Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 2: Application layer for brakes and running gear,Véhicules routiers — Échange d'informations numériques sur les connexions électriques entre véhicules tracteurs et véhicules tractés — Partie 2: Couche d'application pour les équipements de freinage et les organes de roulement,2003-04-28,2,['43.040.15'],ISO/TC 22,9599,[23819],[55046],"['en','fr']",41,"<p>ISO 11992-2:2003 specifies the parameters and messages for electronically controlled braking systems, including ABS (anti-lock braking systems) and for running gear equipment (i.e. systems for steerin