Withdrawn and superseded ISO standards — page 25 of 246

35531,IS,,ISO 11810:2002,Optics and optical instruments — Lasers and laser-related equipment — Test method for the laser-resistance of surgical drapes and/or patient-protective covers,Optique et instruments d'optique — Lasers et équipements associés aux lasers — Méthode d'essai de la résistance au laser des draps chirurgicaux et/ou des couvertures de protection des patients,2002-10-03,1,"['31.260','13.340.99','11.040.30']",ISO/TC 172/SC 9,9599,,[37587],"['en','fr']",10,"<p>ISO 11810:2002 specifies a standardized method for testing and classifying surgical drapes and other patient-protective covers with respect to laser-induced hazards. It applies to disposable and reusable, as well as woven

32251,IS,,ISO 11812:2001,Small craft — Watertight cockpits and quick-draining cockpits,Petits navires — Cockpits étanches et cockpits rapidement autovideurs,2001-12-20,1,['47.080'],ISO/TC 188,9599,,[67204],"['en','fr']",37,"<p>This International Standard specifies requirements for cockpits and recesses to be designated either as 'watertight'</p><p>or as 'quick-draining' on small craft of hull length up to 24 m.</p><p>It does not set requirements for the size and shape of a cockpit or recess, nor when or where it shall be used. It</p><p>only considers draining by gravity, and not by pumping or other methods.</p><p>NOTE 1 The term 'quick-draining cockpit' has been chosen to differentiate from

20092,IS,,ISO 11813:1998,Milk and milk products — Determination of zinc content — Flame atomic absorption spectrometric method,Lait et produits laitiers — Détermination de la teneur en zinc — Méthode par spectrométrie d'absorption atomique avec flamme,1998-12-20,1,['67.100.01'],ISO/TC 34/SC 5,9599,,[55775],"['en','fr']",6,

20095,IS,,ISO 11816-1:1997,Milk and milk products — Determination of alkaline phosphatase activity using a fluorometric method — Part 1: Milk and milk-based drinks,Lait et produits laitiers — Détermination de l'activité de la phosphatase alcaline à l'aide de la méthode fluorimétrique — Partie 1: Lait et boissons à base de lait,1997-01-30,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[39069],"['en','fr']",7,"<p>Specifies a fluorimetric method for the determination of alkaline phosphatase activity in pasteurized whole milk, semi-skimmed milk, skimmed milk and flavoured milks. It is also suitable for the determination of high alkaline phosphatase activity in raw milk and heat-treated milk having activit

39069,IS,,ISO 11816-1:2006,Milk and milk products — Determination of alkaline phosphatase activity — Part 1: Fluorimetric method for milk and milk-based drinks,Lait et produits laitiers — Détermination de l'activité de la phosphatase alcaline — Partie 1: Méthode fluorimétrique pour le lait et les boissons à base de lait,2006-04-07,2,['67.100.10'],ISO/TC 34/SC 5,9599,[20095],[57920],"['en','fr','ru']",11,"<p>ISO 11816-1|IDF 155-1:2006 specifies a fluorimetric method for the determination of alkaline phosphatase (ALP, EC 3.1.3.1) activity in pasteurised whole milk, semi-skimmed milk, skimmed milk and flavoured milks. The method is applicable for milk from cows, sheep and goats, and milk-based

57920,IS,,ISO 11816-1:2013,Milk and milk products — Determination of alkaline phosphatase activity — Part 1: Fluorimetric method for milk and milk-based drinks,Lait et produits laitiers — Détermination de l'activité de la phosphatase alcaline — Partie 1: Méthode fluorimétrique pour le lait et les boissons à base de lait,2013-10-22,3,['67.100.10'],ISO/TC 34/SC 5,9599,[39069],[85718],"['en','fr','ru']",13,"<p>ISO 11816-1|IDF 155-1:2013 specifies a fluorimetric method for the determination of alkaline phosphatase (ALP, EC 3.1.3.1) activity in raw and heat-treated whole milk, semi-skimmed milk, skimmed milk and flavoured milks. This method is applicable to milk and milk-based drinks from cows, s

26473,IS,,ISO 11816-2:2003,Milk and milk products — Determination of alkaline phosphatase activity — Part 2: Fluorometric method for cheese,Lait et produits laitiers — Détermination de l'activité de la phosphatase alcaline — Partie 2: Méthode fluorimétrique pour le fromage,2003-01-22,1,['67.100.30'],ISO/TC 34/SC 5,9599,,[57921],"['en','fr']",8,"<p>ISO 11816-2|IDF 155-2:2003 specifies a fluorometric method for the determination of alkaline phosphatase activity in cheese.</p><p>This method is also applicable to soft cheeses and semi-hard cheeses for distinguishing raw milk cheeses from cheese produced with pasteurized milk, provided that the mould is only on the surface and not also in the inn

57921,IS,,ISO 11816-2:2016,Milk and milk products — Determination of alkaline phosphatase activity — Part 2: Fluorimetric method for cheese,Lait et produits laitiers — Détermination de l'activité de la phosphatase alcaline — Partie 2: Méthode fluorimétrique pour le fromage,2016-08-15,2,['67.100.30'],ISO/TC 34/SC 5,9599,[26473],[85719],"['en','fr']",15,"<p>ISO 11816-2:2016|IDF 155-2:2016 specifies a fluorimetric method for the determination of alkaline phosphatase (ALP, EC 3.1.3.1) activity in cheese.</p><p>This method is applicable to soft cheeses, semi-hard and hard cheeses provided that the mould is only on the surface of the cheese and not also in the inner part (e.g. blue veined cheeses)

20232,IS,,ISO 11819-1:1997,Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 1: Statistical Pass-By method,Acoustique — Méthode de mesurage de l'influence des revêtements de chaussées sur le bruit émis par la circulation — Partie 1: Méthode statistique au passage,1997-09-11,1,['17.140.30'],ISO/TC 43/SC 1,9599,,"[45110,77371,38935]","['en','fr']",27,

5770,IS,,ISO 1182:1983,Fire tests — Building materials — Non-combustibility test,Essais au feu — Matériaux de construction — Essai de non-combustibilité,1983-12-01,2,['13.220.50'],ISO/TC 92/SC 1,9599,,[5771],"['en','fr']",16,

5771,IS,,ISO 1182:1990,Fire tests — Building materials — Non-combustibility test,Essais au feu — Matériaux de construction — Essai de non-combustibilité,1990-12-06,3,['13.220.50'],ISO/TC 92/SC 1,9599,[5770],[27180],"['en','fr']",18,"<p>Specifies a standard method of test for the determination of the combustibility performance of a building material under specified conditions. Does not apply to tests of products which are coated, faced or laminated. This third edition cancels and replaces the second edition (1983).</p>"

27180,IS,,ISO 1182:2002,Reaction to fire tests for building products — Non-combustibility test,Essais de réaction au feu des produits de construction — Essai d'incombustibilité,2002-01-31,4,['13.220.50'],ISO/TC 92/SC 1,9599,[5771],[45779],"['en','fr']",28,

45779,IS,,ISO 1182:2010,Reaction to fire tests for products — Non-combustibility test,Essais de réaction au feu de produits — Essai d'incombustibilité,2010-04-29,5,['13.220.50'],ISO/TC 92/SC 1,9599,[27180],[70178],"['en','fr']",32,"<p>ISO 1182:2010 specifies a method of test for determining the non-combustibility performance, under specified conditions, of homogeneous products and substantial components of non-homogeneous products.</p>"

27790,IS,,ISO 1183-1:2004,"Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method","Plastiques — Méthodes de détermination de la masse volumique des plastiques non alvéolaires — Partie 1: Méthode par immersion, méthode du pycnomètre en milieu liquide et méthode par titrage",2004-01-19,1,['83.080.01'],ISO/TC 61/SC 5,9599,[5773],[55640],"['en','fr']",9,"<p>ISO 1183-1:2004 specifies three methods for the determination of the density of non-cellular plastics in the form of void-free moulded or extruded objects, as well as powders, flakes and granules.</p><ol><li>Method A: Immersion method, for solid plasti

55640,IS,,ISO 1183-1:2012,"Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method","Plastiques — Méthodes de détermination de la masse volumique des plastiques non alvéolaires — Partie 1: Méthode par immersion, méthode du pycnomètre en milieu liquide et méthode par titrage",2012-05-11,2,['83.080.01'],ISO/TC 61/SC 5,9599,[27790],[74990],"['en','fr','ru']",10,

74990,IS,,ISO 1183-1:2019,"Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method","Plastiques — Méthodes de détermination de la masse volumique des plastiques non alvéolaires — Partie 1: Méthode par immersion, méthode du pycnomètre en milieu liquide et méthode par titrage",2019-02-28,3,['83.080.01'],ISO/TC 61/SC 5,9599,[55640],[85977],"['en','fr']",12,"<p>This document specifies three methods for the determination of the density of non-cellular plastics in the form of void-free moulded or extruded objects, as well as powders, flakes and granules.</p><p>— Method A: Immersion method, for solid

5773,IS,,ISO 1183:1987,Plastics — Methods for determining the density and relative density of non-cellular plastics,Plastiques — Méthodes pour déterminer la masse volumique et la densité relative des plastiques non alvéolaires,1987-07-09,1,['83.080.01'],ISO/TC 61/SC 5,9599,[5772],"[29808,27790,29806,29807]","['en','fr']",8,"<p>Specification of four methods for the determination of the density of plastics except cellular plastics. Method A: Immersion method for plastics in a finished condition; Method B: Pyknometer method for plastics in the form of small particles such as powders, granules pellets or flakes; Method C: Titration method for plastics in forms as required for method A including

29806,IS,,ISO 1183-2:2004,Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method,Plastiques — Méthodes de détermination de la masse volumique des plastiques non alvéolaires — Partie 2: Méthode de la colonne à gradient de masse volumique,2004-07-14,1,['83.080.01'],ISO/TC 61/SC 5,9599,[5773],[74991],"['en','fr']",10,"<p>ISO 1183-2:2004 specifies a gradient column method for the determination of the density of non-cellular moulded or extruded plastics in void-free form. Density gradient columns are columns containing a mixture of two liquids, the density in the column increasing uniformly from top to bottom.</p>"

74991,IS,,ISO 1183-2:2019,Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method,Plastiques — Méthodes de détermination de la masse volumique des plastiques non alvéolaires — Partie 2: Méthode de la colonne à gradient de masse volumique,2019-02-28,2,['83.080.01'],ISO/TC 61/SC 5,9599,[29806],[91098],"['en','fr']",11,"<p>This document specifies a gradient column method for the determination of the density of non-cellular moulded or extruded plastics or pellets in void-free form. Density gradient columns are columns containing a mixture of two liquids, the density in the column increasing uniformly from top to bottom.</p><p>NOTE De

20142,IS,,ISO 11833-1:1998,"Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm","Plastiques — Feuilles en poly(chlorure de vinyle) non plastifié — Types, dimensions et caractéristiques — Partie 1: Plaques d'épaisseur non inférieure à 1 mm",1998-07-16,1,['83.140.10'],ISO/TC 61/SC 11,9599,,[41678],"['en','fr']",12,

41678,IS,,ISO 11833-1:2007,"Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm","Plastiques — Feuilles en poly(chlorure de vinyle) non plastifié — Types, dimensions et caractéristiques — Partie 1: Plaques d'épaisseur non inférieure à 1 mm",2007-10-23,2,['83.140.10'],ISO/TC 61/SC 11,9599,[20142],[54741],"['en','fr','ru']",13,"<p>ISO 11833-1:2007 specifies the requirements for flat extruded sheets and pressed sheets of unplasticized poly(vinyl chloride) (PVC‑U) and the test methods to be used to measure the required values.</p><p>It applies only to sheets of thickness not less than 1,0 mm.</p><p>It does

54741,IS,,ISO 11833-1:2012,"Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm","Plastiques — Feuilles en poly(chlorure de vinyle) non plastifié — Types, dimensions et caractéristiques — Partie 1: Plaques d'épaisseur non inférieure à 1 mm",2012-05-31,3,['83.140.10'],ISO/TC 61/SC 11,9599,[41678],[75588],"['en','fr']",14,"<p>ISO 11833-1:2012 specifies the requirements for flat extruded sheets and pressed sheets of unplasticized poly(vinyl chloride) (PVC‑U) and the test methods to be used to measure the required values.</p><p>It applies only to sheets of thickness not less than 1,0 mm.</p><p>It does not c

3367,IS,,ISO 11835:1995,Road vehicles — Motor vehicles with antilock braking system — Measurement of braking performance,Véhicules routiers — Automobiles équipées de dispositifs antiblocage — Mesurage des performances de freinage,1995-04-20,1,['43.040.40'],ISO/TC 22,9599,,[27126],"['en','fr']",10,<p>Specifies the test method to be adopted when testing the antilock braking systems on motor vehicles of categories M and N as defined in UN-ECE Regulation No. 13.</p>

50881,IS,,ISO 11839:2010,Machinery for forestry — Glazing and panel materials used in operator enclosures for protection against thrown sawteeth — Test method and performance criteria,Matériel forestier — Matériaux pour vitrage et panneaux utilisés dans l'enceinte de l'opérateur contre la projection des dents de scie — Méthode d'essai et critères de performance,2010-09-22,1,['65.060.80'],ISO/TC 23/SC 15,9599,,[73005],"['en','fr']",6,"<p>ISO 11839:2010 specifies test procedures and performance requirements for determining the protective ability of panel materials used in forestry-machinery operator enclosures intended to protect the operator against sawteeth thrown by circular-saw components.

60568,IS,Cor,ISO 11839:2010/Cor 1:2012,Machinery for forestry — Glazing and panel materials used in operator enclosures for protection against thrown sawteeth — Test method and performance criteria — Technical Corrigendum 1,Matériel forestier — Matériaux pour vitrage et panneaux utilisés dans l'enceinte de l'opérateur contre la projection des dents de scie — Méthode d'essai et critères de performance — Rectificatif technique 1,2012-03-19,1,['65.060.80'],ISO/TC 23/SC 15,9599,,[73005],"['en','fr']",2,

5774,IS,,ISO 1184:1983,Plastics — Determination of tensile properties of films,Plastiques — Détermination des caractéristiques en traction des films,1983-08-01,1,['83.140'],ISO/TC 61/SC 11,9599,,[4594],"['en','fr']",7,

53677,IS,,ISO 11843-6:2013,Capability of detection — Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations,Capacité de détection — Partie 6: Méthodologie pour la détermination de la valeur critique et de la valeur minimale détectable pour les mesures distribuées selon la loi de Poisson approximée par la loi Normale,2013-03-01,1,"['03.120.30','17.020']",ISO/TC 69/SC 6,9599,,[76450],['en'],20,<p>ISO 11843-6:2013 presents methods for determining the critical value of the response variable and the minimum detectable value in Poisson distribution measurements. It is applicable when variations i

76450,IS,,ISO 11843-6:2019,Capability of detection — Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations,Capacité de détection — Partie 6: Méthodologie pour la détermination de la valeur critique et de la valeur minimale détectable pour les mesures distribuées selon la loi de Poisson approximée par la loi Normale,2019-02-18,2,"['03.120.30','17.020']",ISO/TC 69/SC 6,9599,[53677],[90056],['en'],23,<p>This document presents methods for determining the critical value of the response variable and the minimum detectable value in Poisson distribution measurements. It is applicable when variatio

53678,IS,,ISO 11843-7:2012,Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise,Capacité de détection — Partie 7: Méthodologie basée sur les propriétés stochastiques du bruit instrumental,2012-06-04,1,"['03.120.30','17.020']",ISO/TC 69/SC 6,9599,,[67017],['en'],17,"<p>Background noise ubiquitously exists in analytical instruments whether or not a sample is applied to the instrument. ISO 11843-7:2012 is concerned with mathematical methodologies for estimating the minimum detectable value in case that the most predominant source of measurement uncertainty is background noise. The minimum detectable value can directly and mathematically be derived f

67017,IS,,ISO 11843-7:2018,Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise,Capacité de détection — Partie 7: Méthodologie basée sur les propriétés stochastiques du bruit instrumental,2018-09-05,2,"['03.120.30','17.020']",ISO/TC 69/SC 6,9599,[53678],[83231],['en'],18,"<p>Background noise exists ubiquitously in analytical instruments, whether or not a sample is applied to the instrument. This document is concerned with mathematical methodologies for estimating the minimum detectable value in case that the most predominant source of measurement uncertainty is background noise. The minimum detectable value can directly and mathematically be deri

36651,IS,,ISO 11844-1:2006,Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 1: Determination and estimation of indoor corrosivity,Corrosion des métaux et alliages — Classification de la corrosivité faible des atmosphères d'intérieur — Partie 1: Détermination et estimation de la corrosivité des atmosphères d'intérieur,2006-03-17,1,['77.060'],ISO/TC 156,9599,,[73253],"['en','fr']",16,"<p>ISO11844-1:2006 deals with the classification of low corrosivity of indoor atmospheres.</p><p>The aim of ISO11844-1:2006 is to characterise indoor atmospheric environments of low corrosivity that can affect metals and metallic coatings during storage, transport, i

36649,IS,,ISO 11844-2:2005,Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 2: Determination of corrosion attack in indoor atmospheres,Corrosion des métaux et alliages — Classification de la corrosivité faible des atmosphères d'intérieur — Partie 2: Détermination de l'attaque par corrosion dans les atmosphères d'intérieur,2005-12-07,1,['77.060'],ISO/TC 156,9599,,[73254],"['en','fr']",11,"<p>ISO 11844-2:2005 specifies methods for determination of corrosion rate with standard specimens of metals in indoor atmospheres with low corrosivity. For this direct method of evaluation of corrosivity, different sensitive methods can be applied using standard

36650,IS,,ISO 11844-3:2006,Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 3: Measurement of environmental parameters affecting indoor corrosivity,Corrosion des métaux et alliages — Classification de la corrosivité faible des atmosphères d'intérieur — Partie 3: Mesurage des paramètres environnementaux affectant la corrosivité des atmosphères d'intérieur,2006-05-11,1,['77.060'],ISO/TC 156,9599,,[73255],"['en','fr']",10,<p>ISO 11844-3:2006 describes methods for measuring the environmental parameters used to classify the corrosivity of indoor atmospheres on metals and alloys.</p>

3208,IS,,ISO 11845:1995,Corrosion of metals and alloys — General principles for corrosion testing,Corrosion des métaux et alliages — Principes généraux des essais de corrosion,1995-10-05,1,['77.060'],ISO/TC 156,9599,,[73319],"['en','fr']",5,<p>Contains the most important general guidelines for carrying out corrosion test under conditions of constant immersion. Does not cover procedures for stress corrosion testing.</p>

5775,IS,,ISO 1185:1975,Road vehicles — Electrical connections between towing vehicles and towed vehicles with 24 V electrical equipment — Type 24 N (normal),Véhicules routiers — Liaisons électriques entre véhicules tracteurs et véhicules remorqués avec équipement électrique 24 V — Type 24 N (normal),1975-11-01,1,['43.040.10'],ISO/TC 22,9599,,[5776],"['en','fr']",5,

5776,IS,,ISO 1185:1997,Road vehicles — Electrical connections between towing and towed vehicles with 24 V systems — 7 pole connector type 24 N (normal),Véhicules routiers — Connexions électriques entre véhicule tracteur et véhicule tracté équipés d'un circuit électrique de 24 V — Connecteur à 7 contacts de type 24 N (normal),1997-10-23,2,['43.040.10'],ISO/TC 22,9599,[5775],[30213],"['en','fr']",7,

10085,IS,,ISO 11850:1996,Machinery for forestry — Self-propelled machinery — Safety,Matériel forestier — Machines automotrices — Sécurité,1996-11-28,1,['65.060.80'],ISO/TC 23/SC 15,9599,,[30917],"['en','fr']",9,<p>Specifies general safety requirements for specially designed self-propelled forestry machines and machines adapted for forestry applications.</p>

30917,IS,,ISO 11850:2003,Machinery for forestry — Self-propelled machinery — Safety requirements,Matériel forestier — Machines automotrices — Prescriptions de sécurité,2003-03-14,2,['65.060.80'],ISO/TC 23/SC 15,9599,[10085],[51182],"['en','fr']",11,"<p>ISO 11850:2003 specifies safety requirements for common design aspects of mobile, ride-on, self-propelled forestry machines. It is applicable to fellers, bunchers, delimbers, forwarders, logloaders, skidders, processors, harvesters, and multi-function versions of these machine types, as defined in ISO 6814. It is not applicable to the optional attachments for these machines. It covers certain hazards common to forestry machinery, but does not

50750,IS,,ISO 11852:2011,Rubber — Determination of magnesium content of field and concentrated natural rubber latex by titration,Caoutchouc — Détermination par titrage de la teneur en magnésium du latex de plantation et du latex concentré de caoutchouc naturel,2011-10-31,1,['83.040.10'],ISO/TC 45/SC 3,9599,,[67224],"['en','fr']",9,

52407,IS,,ISO 11855-1:2012,"Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 1: Definition, symbols, and comfort criteria","Conception de l'environnement des bâtiments — Conception, dimensionnement, installation et contrôle des systèmes intégrés de chauffage et de refroidissement par rayonnement — Partie 1: Définition, symboles et critères de confort",2012-07-25,1,['91.040.01'],ISO/TC 205,9599,,[74682],"['en','fr']",27,"<p>ISO 11855-1:2012 specifies the basic definitions, symbols, and a comfort criteria for radiant heating and cooling systems.</p><p>ISO 11855-1:2012 is applicable to water based embedded surfac

52408,IS,,ISO 11855-2:2012,"Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 2: Determination of the design heating and cooling capacity","Conception de l'environnement des bâtiments — Conception, dimensionnement, installation et contrôle des systèmes intégrés de chauffage et de refroidissement par rayonnement — Partie 2: Détermination de la puissance calorifique et frigorifique à la conception",2012-09-24,1,['91.040.01'],ISO/TC 205,9599,,[74683],"['en','fr']",57,

52409,IS,,ISO 11855-3:2012,"Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 3: Design and dimensioning","Conception de l'environnement des bâtiments — Conception, dimensionnement, installation et contrôle des systèmes intégrés de chauffage et de refroidissement par rayonnement — Partie 3: Conception et dimensionnement",2012-09-24,1,['91.040.01'],ISO/TC 205,9599,,[74684],"['en','fr']",15,

52410,IS,,ISO 11855-4:2012,"Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS)","Conception de l'environnement des bâtiments — Conception, dimensionnement, installation et contrôle des systèmes intégrés de chauffage et de refroidissement par rayonnement — Partie 4: Dimensionnement et calculs relatifs au chauffage adiabatique et à la puissance frigorifique pour systèmes thermoactifs (TABS)",2012-07-25,1,['91.040.01'],ISO/TC 205,9599,,[74686],"['en','fr']",53,"<p>ISO 11855-4:2012 allows the calculat

52411,IS,,ISO 11855-5:2012,"Building environment design — Design , dimensioning, installation and control of embedded radiant heating and cooling systems — Part 5: Installation","Conception de l'environnement des bâtiments — Conception, dimensionnement, installation et contrôle des systèmes intégrés de chauffage et de refroidissement par rayonnement — Partie 5: Installation",2012-04-11,1,['91.040.01'],ISO/TC 205,9599,,[74685],"['en','fr']",10,

52412,IS,,ISO 11855-6:2012,"Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 6: Control","Conception de l'environnement des bâtiments — Conception, construction et fonctionnement des systèmes de chauffage et de refroidissement par rayonnement — Partie 6: Contrôle",2012-11-13,1,['91.040.01'],ISO/TC 205,9599,,[64999],['en'],12,"<p>ISO 11855-6:2012 establishes guidelines on the control of embedded radiant heating and cooling systems. It specifies uniform requirements for the design and construction of heating and cooling floors, ceiling and wall structures to ensure that the heating/cooling systems are suited to

56092,IS,,ISO 11856:2014,Textile floor coverings — Test methods for the determination of fibre bind using a Modified Martindale Machine,Revêtements de sol textiles — Méthodes d'essai pour la détermination du défibrage en utilisant un appareillage de martindale modifié,2014-06-27,1,['97.150'],ISO/TC 219,9599,[20257],[67632],['en'],3,"<p>The method in ISO 11856:2014 uses a modified Martindale fabric abrasion machine to assess fibre loss in pile carpets by weighing the amount of fibre removed at specified intervals. It is applicable to all types of cut pile, wool-rich textile floor coverings.</p>"

20273,IS,,ISO 11865:1995,Instant whole milk powder — Determination of white flecks number,Lait entier instantané en poudre — Détermination du nombre de taches blanches,1995-11-09,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[53828],"['en','fr']",5,<p>Describes a method for the determination of the white flecks number in instant whole milk powder.</p>

20274,IS,,ISO 11866-1:1997,Milk and milk products — Enumeration of presumptive Escherichia coli — Part 1: Most probable number technique,Lait et produits laitiers — Dénombrement d'Escherichia coli présumés — Partie 1: Technique du nombre le plus probable,1997-01-30,1,['07.100.30'],ISO/TC 34/SC 5,9599,,[34568],"['en','fr']",11,"<p>Relates to a method for the enumeration of presumptive Escherichia coli by means of the culture technique involving a liquid medium, and calculation of the number of Escherichia coli per gram or per millilitre by the most probable number (MPN) after incubation at 37 °C.</p>"

20275,IS,,ISO 11866-2:1997,Milk and milk products — Enumeration of presumptive Escherichia coli — Part 2: Most probable number technique using 4-methylumbelliferyl-beta-D-glucuronide (MUG),Lait et produits laitiers — Dénombrement d'Escherichia coli présumés — Partie 2: Technique du nombre le plus probable avec utilisation de 4-méthylumbelliféryl-bêta-D-glucuronide (MUG),1997-02-06,1,['07.100.30'],ISO/TC 34/SC 5,9599,,[42703],"['en','fr']",10,"<p>Describes a combined method for the enumeration of presumptive Escherichia coli and of presumptive coliforms by means of a culture technique involving a liquid medium with 4-methylumbelliferyl-ß-D-glucuronide (MUG), calculation of the number of Esche

23853,IS,,ISO 11866-3:1997,Milk and milk products — Enumeration of presumptive Escherichia coli — Part 3: Colony-count technique at 44 degrees C using membranes,Lait et produits laitiers — Dénombrement d'Escherichia coli présumés — Partie 3: Technique par comptage des colonies obtenues sur membranes à 44 degrés C,1997-02-06,1,['07.100.30'],ISO/TC 34/SC 5,9599,,[42704],"['en','fr']",9,"<p>Describes a method for the enumeration of presumptive Escherichia coli by means of a colony-count technique at 44 °C using membranes. Applicable to milk, liquid milk products, dried milk, butter, frozen milk products, cheese, cream, etc.</p>"

20277,IS,,ISO 11868:1997,Heat-treated milk — Determination of lactulose content — Method using high-performance liquid chromatography,Lait traité thermiquement — Détermination de la teneur en lactulose — Méthode par chromatographie liquide à haute performance,1997-12-11,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[44510],"['en','fr']",10,

20278,IS,,ISO 11869:1997,Yogurt — Determination of titratable acidity — Potentiometric method,Yaourt — Détermination de l'acidité titrable — Méthode potentiométrique,1997-01-30,1,['67.100.99'],ISO/TC 34/SC 5,9599,,[56875],"['en','fr']",4,<p>Specifies a potentiometric method for the determination of the titratable acidity of natural yogurt and fruit yogurt.</p>

20279,IS,,ISO 11870:2000,Milk and milk products — Determination of fat content — General guidance on the use of butyrometric methods,Lait et produits laitiers — Détermination de la teneur en matière grasse — Directives générales pour l'utilisation des méthodes butyrométriques,2000-03-02,1,['67.100.01'],ISO/TC 34/SC 5,9599,,[53829],"['en','fr']",8,

5779,IS,,ISO 1188:1974,Cinematography — Recording characteristic for magnetic sound record on 16 mm motion-picture film — Specifications,Cinématographie — Caractéristique d'enregistrement magnétique du son sur film cinématographique de 16 mm — Spécifications,1974-02-01,1,['37.060.20'],ISO/TC 36,9599,,[5780],"['en','fr']",2,

20312,IS,,ISO 11884-1:1998,Optics and optical instruments — Minimum requirements for stereomicroscopes — Part 1: Stereomicroscopes for general use,Optique et instruments d'optique — Prescriptions minimales pour les stéréo-microscopes — Partie 1: Stéréo-microscopes à usage général,1998-04-23,1,['37.020'],ISO/TC 172/SC 5,9599,,[39553],"['en','fr']",6,

26110,IS,,ISO 11884-2:1997,Optics and optical instruments — Minimum requirements for stereomicroscopes — Part 2: High performance microscopes,Optique et instruments d'optique — Prescriptions minimales pour les stéréomicroscopes — Partie 2: Microscopes à haute performance,1997-09-18,1,['37.020'],ISO/TC 172/SC 5,9599,,[41829],"['en','fr']",5,

2283,IS,,ISO 11885:1996,Water quality — Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy,Qualité de l'eau — Détermination de 33 éléments par spectroscopie d'émission atomique avec plasma couplé par induction,1996-12-26,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[36250],"['en','fr']",13,"<p>Specifies a method by inductively coupled plasma atomic emission spectroscopy for the determination of 33 dissolved or particulate elements in raw, potable and waste water. Because of the differences between various makes and models no detailed instrumental operating instructions can be given.</p>"

20320,IS,,ISO 11886:2002,Building construction machinery and equipment — Pile driving and extracting equipment — Terminology and commercial specifications,Machines et matériels pour la construction des bâtiments — Matériel de battage et d'extraction — Terminologie et spécifications commerciales,2002-08-22,1,"['91.220','01.040.91']",ISO/TC 195/SC 3,9599,,"[67106,82318]","['en','fr']",30,"<p>ISO 11886:2002 specifies terms and definitions of the main types of mechanical equipment for pile driving/extracting, such as pile arrangements on the construction site, pulling, installation of piles at the point of driving, driving and extraction of piles, pile head crushing, etc. Machines for non-mechan

43725,IS,Cor,ISO 11886:2002/Cor 1:2006,Building construction machinery and equipment — Pile driving and extracting equipment — Terminology and commercial specifications — Technical Corrigendum 1,Machines et matériels pour la construction des bâtiments — Matériel de battage et d'extraction — Terminologie et spécifications commerciales — Rectificatif technique 1,2006-03-31,1,"['91.220','01.040.91']",ISO/TC 195/SC 3,9599,,"[67106,82318]","['en','fr']",1,

5781,IS,,ISO 1189:1975,Cinematography — Recorded characteristic for magnetic sound records on 35 mm motion-picture film — Specifications,Cinématographie — Caractéristique d'enregistrement magnétique sur film cinématographique de 35 mm perforé — Spécifications,1975-01-01,1,['37.060.20'],ISO/TC 36,9599,,[5782],"['en','fr']",2,

27918,IS,,ISO 11890-1:2000,Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method,Peintures et vernis — Détermination de la teneur en composés organiques volatils (COV) — Partie 1: Méthode par différence,2000-05-25,1,['87.040'],ISO/TC 35,9599,,[41101],"['en','fr']",7,

41101,IS,,ISO 11890-1:2007,Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method,Peintures et vernis — Détermination de la teneur en composés organiques volatils (COV) — Partie 1: Méthode par différence,2007-06-26,2,['87.040'],ISO/TC 35,9599,[27918],[82767],"['en','fr','ru']",9,"<p>ISO 11890-1:2007 is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products.</p><p>It specifies a method for the determination of the volatile organic compound (VOC) content of paints, varnishes and their raw materials. This part may be used where the expected VOC content is greater than 15 % by mass. When th

27919,IS,,ISO 11890-2:2000,Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 2: Gas-chromatographic method,Peintures et vernis — Détermination de la teneur en composés organiques volatils (COV) — Partie 2: Méthode par chromatographie en phase gazeuse,2000-05-25,1,['87.040'],ISO/TC 35,9599,,[37492],"['en','fr']",14,

37492,IS,,ISO 11890-2:2006,Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 2: Gas-chromatographic method,Peintures et vernis — Détermination de la teneur en composés organiques volatils (COV) — Partie 2: Méthode par chromatographie en phase gazeuse,2006-11-02,2,['87.040'],ISO/TC 35,9599,[27919],[61298],"['en','fr','ru']",16,"<p>ISO 11890-2:2006 is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products.</p><p>It specifies a method for the determination of the volatile organic compound (VOC) content of paints, varnishes and their raw materials. ISO 11890-2 is preferred if the expected VOC content is gr

61298,IS,,ISO 11890-2:2013,Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 2: Gas-chromatographic method,Peintures et vernis — Détermination de la teneur en composés organiques volatils (COV) — Partie 2: Méthode par chromatographie en phase gazeuse,2013-03-12,3,['87.040'],ISO/TC 35,9599,[37492],[72823],"['en','fr','ru']",17,"<p>ISO 11890-2:2013 is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products.</p><p>It specifies a method for the determination of the volatile organic compound (VOC) content of paints, varnishes and their raw materials. This part is preferred if the expected VOC content is grea

57529,IS,,ISO 11892:2012,Space systems — Subsystems/units to spacecraft interface control document,Systèmes spatiaux — Document de contrôle des interfaces entre les sous-systèmes/unités et le véhicule spatial,2012-03-02,1,['49.140'],ISO/TC 20/SC 14,9599,,[86542],['en'],16,"<p>This International Standard provides space system manufacturing organizations with the minimum interface related items and generic format for creating the interface control document (ICD) which subsystems or units suppliers prepare for spacecraft systems (SC) integrators. In this International Standard, ICD is not defined to contain descriptions regarding various properties of subsystems or units or tasks to be done by

33422,IS,,ISO 11898-1:2003,Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling,Véhicules routiers — Gestionnaire de réseau de communication (CAN) — Partie 1: Couche liaison de données et signalisation physique,2003-11-19,1,['43.040.15'],ISO/TC 22/SC 31,9599,"[22392,20380]",[63648],"['en','fr']",45,"<p>ISO 11898-1:2003 specifies the data link layer (DLL) and physical signalling of the controller area network (CAN): a serial communication protocol that supports distributed real-time control and multiplexing for use within road vehicles. While describing the general architecture of CAN in terms of hierarchical layers according to the ISO reference mod

44158,IS,Cor,ISO 11898-1:2003/Cor 1:2006,Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling — Technical Corrigendum 1,Véhicules routiers — Gestionnaire de réseau de communication (CAN) — Partie 1: Couche liaison de données et signalisation physique — Rectificatif technique 1,2006-05-24,1,['43.040.15'],ISO/TC 22/SC 31,9599,,[63648],"['en','fr']",6,

63648,IS,,ISO 11898-1:2015,Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling,Véhicules routiers — Gestionnaire de réseau de communication (CAN) — Partie 1: Couche liaison de données et signalisation physique,2015-12-14,2,['43.040.15'],ISO/TC 22/SC 31,9599,"[44158,33422]","[86384,83292]",['en'],65,"<p>ISO 11898-1:2015 specifies the characteristics of setting up an interchange of digital information between modules implementing the CAN data link layer. Controller area network is a serial communication protocol, which supports distributed real-time control and multiplexing for use within road vehicles and other control applications.</p><p>ISO 11898-

20380,IS,,ISO 11898:1993,Road vehicles — Interchange of digital information — Controller area network (CAN) for high-speed communication,Véhicules routiers — Échange d'information numérique — Gestionnaire de réseau de communication à vitesse élevée (CAN),1993-11-18,1,['43.040.15'],ISO/TC 22,9599,,"[33423,33422]",['en'],58,<p>Describes the general architecture of CAN in terms of hierarchical layers according to the ISO reference model for OSI specified in ISO 7498. Contains detailed specifications of aspects of CAN belonging to the physical layer and the data link layer. Specifies characteristics of setting up an interchange of digital information between electron control units of road vehicl

22392,IS,Amd,ISO 11898:1993/Amd 1:1995,Road vehicles — Interchange of digital information — Controller area network (CAN) for high-speed communication — Amendment 1,Véhicules routiers — Échange d'information numérique — Gestionnaire de réseau de communication à vitesse élevée (CAN) — Amendement 1,1995-04-06,1,['43.040.15'],ISO/TC 22,9599,,"[33423,33422]",['en'],9,"<p>Inserts a new page v and a new introduction. Replaces, adds and amends text on pages 10 to 19, 21, 22, 24 and 28.</p>"

33423,IS,,ISO 11898-2:2003,Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit,Véhicules routiers — Gestionnaire de réseau de communication (CAN) — Partie 2: Unité d'accès au support à haute vitesse,2003-11-19,1,['43.040.15'],ISO/TC 22/SC 31,9599,"[22392,20380]",[67244],"['en','fr']",21,"<p>ISO 11898-2:2003 specifies the high-speed (transmission rates of up to 1 Mbit/s) medium access unit (MAU), and some medium dependent interface (MDI) features (according to ISO 8802-3), which comprise the physical layer of the controller area network (CAN): a serial communication protocol that supports distributed real-time control and multiplexing for use within road vehi

67244,IS,,ISO 11898-2:2016,Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit,Véhicules routiers — Gestionnaire de réseau de communication (CAN) — Partie 2: Unité d'accès au support à haute vitesse,2016-12-14,2,['43.040.15'],ISO/TC 22/SC 31,9599,[33423],[85120],['en'],30,"<p>ISO 11898-2:2016 specifies the high-speed physical media attachment (HS-PMA) of the controller area network (CAN), a serial communication protocol that supports distributed real-time control and multiplexing for use within road vehicles. This includes HS-PMAs without and with low-power mode capability as well as with selective wake-up functionality. The physical media dependant sublayer

85120,IS,,ISO 11898-2:2024,Road vehicles — Controller area network (CAN) — Part 2: High-speed physical medium attachment (PMA) sublayer,Véhicules routiers — Gestionnaire de réseau de communication (CAN) — Partie 2: Sous-couche de l’unité d'accès au support à haute vitesse (PMA),2024-03-22,3,['43.040.15'],ISO/TC 22/SC 31,9599,[67244],[90697],['en'],64,"<p class='MsoBodyText'><span lang='EN-GB'>This document specifies physical medium attachment (PMA) sublayers for the controller area network (CAN). This includes the high-speed (HS) PMA without and with low-power mode capability, without and with selective wake-up functionality. Additionally, this document specifies PMAs supporting the signal i

2962,IS,,ISO 11900-1:1994,"Tools for pressing — Ball-lock punch retainers — Part 1: Types A and B, rectangular and square for light duty","Outillage de presse - Porte-poinçons pour poinçons à bille — Partie 1: Types A et B, rectangulaire et carré pour tôles minces",1994-08-18,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[44041],"['en','fr']",4,"<p>Specifies the dimensions and tolerances of ball-lock punch retainers, Type A (rectangular) and type B (square) for light duty, and of their backing plates, the main use being retention of ball-lock punches in accordance with ISO 10071, when punching holes in steel sheets. Also gives material guidelines and hardness requirements, and specifies the designati

32103,IS,,ISO 11900-2:2001,"Tools for pressing — Ball-lock punch retainers — Part 2: Types C and D, reduced for light duty","Outillage de presse — Porte-poinçons pour poinçons à bille — Partie 2: Types C et D, réduits pour tôles minces",2001-08-09,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[45061],"['en','fr']",5,

20384,IS,,ISO 11901-1:1995,Tools for pressing — Gas springs — Part 1: General specifications,Outillage de presse — Ressorts à gaz — Partie 1: Spécifications générales,1995-12-07,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[29169],"['en','fr']",10,"<p>Specifies the dimensions, nominal forces and operating pressures of gas springs for use in press tools. Gives also marking, technical delivery conditions and designation.</p>"

29169,IS,,ISO 11901-1:2003,Tools for pressing — Gas springs — Part 1: General specifications,Outillage de presse — Ressorts à gaz — Partie 1: Spécifications générales,2003-12-01,2,['25.120.10'],ISO/TC 29/SC 8,9599,[20384],[85165],"['en','fr']",11,"<p>ISO 11901-1:2003 specifies the dimensions, in millimetres, nominal initial forces and type of gas springs.</p><p>It applies to gas springs of type 900 to 100 000, pressurized with nitrogen with a nominal initial force of between 900 N and 100 600 N, for use in press tools.</p><p>ISO 11901-1:2003 also specifies marking, technical delivery conditions and designation.</p>"

20385,IS,,ISO 11901-2:1995,Tools for pressing — Gas springs — Part 2: Specification of accessories,Outillage de presse — Ressorts à gaz — Partie 2: Spécifications des accessoires,1995-12-07,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[29170],"['en','fr']",12,<p>Specifies dimensions of accessories intended for use in press tools together with gas springs.</p>

29170,IS,,ISO 11901-2:2004,Tools for pressing — Gas springs — Part 2: Specification of accessories,Outillage de presse — Ressorts à gaz — Partie 2: Spécifications des accessoires,2004-04-07,2,['25.120.10'],ISO/TC 29/SC 8,9599,[20385],[68884],"['en','fr']",10,"<p>ISO 11901-2:2004 specifies the dimensions, in millimetres, of mounting base plates, of two-part mounting clamps, of flange mounts and of front end supports intended for use in press tools together with gas springs in accordance with ISO 11901-1:2003. It also gives information concerning materials and specifies the designation of the mounting accessories in accordance with this part of ISO 11901.</p>"

68884,IS,,ISO 11901-2:2018,Tools for pressing — Gas springs — Part 2: Specification of accessories,Outillage de presse — Ressorts à gaz — Partie 2: Spécifications des accessoires,2018-10-23,3,['25.120.10'],ISO/TC 29/SC 8,9599,[29170],[89390],"['en','fr']",12,"<p>This document specifies the dimensions in millimetres, of mounting base plates, of two-part mounting clamps, of flange mounts and front end supports intended for use in press tool together with gas springs in accordance with ISO 11901‑1, ISO 11901‑3 and ISO 11901‑4.</p><p>It also gives information concerning materials and specifies the designation of the mounting accessories in accordance with this document.</p>"

59868,IS,,ISO 11901-3:2014,Tools for pressing — Gas springs — Part 3: Gas spring with increased spring force and compact built height,Outillage de presse — Ressorts à gaz — Partie 3: Ressorts à gaz à force accrue à faible encombrement en hauteur,2014-02-19,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[81020],"['en','fr']",13,"<p>ISO 11901-3:2014 specifies the dimensions (in millimetres), nominal initial forces and types of gas springs.</p><p>It is applicable to gas springs with increased spring force and compact built height of type 1 700 to 200 000, pressurized with nitrogen with a nominal initial force of between 1 700 N ± 5 % and 200 000 N ± 5 %, for use in press tools.</p><p>It also specifies ma

59869,IS,,ISO 11901-4:2014,Tools for pressing — Gas springs — Part 4: Gas springs with increased spring force and same built height,Outillage de presse — Ressorts à gaz — Partie 4: Ressorts à gaz à force accrue à même encombrement en hauteur,2014-02-19,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[81021],"['en','fr']",9,"<p>ISO 11901-4:2014 specifies the dimensions (in millimetres), nominal initial forces and types of gas springs.</p><p>It is applicable to gas springs with increased spring force and same built height of type 10 000 to 95 000, pressurized with nitrogen with a nominal initial force of between 10 000 N ± 5 % and 95 000 N ± 5 %, for use in press tools.</p><p>It also specifies marking, t

21675,IS,,ISO 11903:1996,Tools for pressing — Guide pillar mountings,Outillage de presse — Embases de guidage,1996-11-21,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[45062],"['en','fr']",3,"<p>Specifies the dimensions and tolerances, in millimetres, of guide pillar mountings intended for mounting with or without guide bushes according to ISO 9448-2, ISO-9448-3 and ISO 9448-6 to ISO 9448-11. Gives guidance relative to material and specifies the designation of guide pillar mountings in accordance with this International Standard.</p>"

32439,IS,,ISO 11904-2:2004,Acoustics — Determination of sound immission from sound sources placed close to the ear — Part 2: Technique using a manikin,Acoustique — Détermination de l'exposition sonore due à des sources placées à proximité de l'oreille — Partie 2: Technique utilisant un mannequin,2004-10-27,1,['17.140.01'],ISO/TC 43,9599,,[81332],['en'],16,"<p>ISO 11904-2:2004 specifies basic framework measurement methods for sound immission from sound sources placed close to the ear. These measurements are carried out with a manikin, equipped with ear simulators including microphones. The measured values are subsequently converted into corresponding free-field or diffuse-field levels. The re

22158,IS,,ISO 11907-1:1998,Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: Guidance,Plastiques — Production de fumées — Détermination de la corrosivité des effluents du feu — Partie 1: Lignes directrices,1998-04-02,1,"['83.080.01','13.220.40']",ISO/TC 61/SC 4,9599,,[65244],"['en','fr']",6,

20405,IS,,ISO 11907-2:1995,Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 2: Static method,Plastiques — Production de fumées — Détermination de la corrosivité des effluents du feu — Partie 2: Méthode statique,1995-11-23,1,"['83.080.01','13.220.40']",ISO/TC 61/SC 4,9599,,[25905],"['en','fr']",12,"<p>Describes a test method using a small-scale laboratory apparatus for the determination of the corrosive effects of combustion products liberated by burning plastics. Makes it possible to produce a ranking of materials by corrosivity of their combustion products under specific test conditions with regard to combustion temperature, available oxygen, ventilati

20460,IS,,ISO 11908:1996,Binders for paints and varnishes — Amino resins — General methods of test,Liants pour peintures et vernis — Résines aminoplastes — Méthodes générales d'essai,1996-06-06,1,['87.060.20'],ISO/TC 35,9599,,"[87254,36629]","['en','fr']",3,"<p>Describes general test methods for amino resins and solutions of amino resins intended for use as binders in paints, varnishes and related products.</p>"

20459,IS,,ISO 11909:1996,Binders for paints and varnishes — Polyisocyanate resins — General methods of test,Liants pour peintures et vernis — Résines de polyisocyanate — Méthodes générales d'essai,1996-06-06,1,['87.060.20'],ISO/TC 35,9599,,[44646],"['en','fr']",4,"<p>Describes general test methods for polyisocyanate resins and solutions of polyisocyanate resins intended for use as binders in paints, varnishes and related products.</p>"

44646,IS,,ISO 11909:2007,Binders for paints and varnishes — Polyisocyanate resins — General methods of test,Liants pour peintures et vernis — Résines de polyisocyanate — Méthodes générales d'essai,2007-01-23,2,['87.060.20'],ISO/TC 35,9599,[20459],[89841],"['en','fr']",6,"<p>ISO 11909:2007 details general test methods for polyisocyanate resins and solutions of polyisocyanate resins intended for use as binders in paints, varnishes and related products.</p>"

5786,IS,,ISO 1191:1975,Plastics — Polyethylenes and polypropylenes in dilute solution — Determination of viscosity number and of limiting viscosity number,Matières plastiques — Polyéthylènes et polypropylènes en solution diluée — Détermination de l'indice de viscosité et de l'indice limite de viscosité,1975-06-01,3,['83.080.20'],ISO/TC 61,9599,[5785],[6229],"['en','fr']",4,

9035,IS,,ISO 11922-1:1997,Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series,Tubes en matières thermoplastiques pour le transport des fluides — Dimensions et tolérances — Partie 1: Série métrique,1997-04-03,1,['23.040.20'],ISO/TC 138,9599,"[9039,9036,9040,9034]",[65255],"['en','fr']",13,

21804,IS,,ISO 11925-2:1997,Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 2: Single flame source test,Essais de réaction au feu — Allumabilité des produits du bâtiment soumis à l'incidence directe de la flamme — Partie 2: Essai à l'aide d'une source à flamme unique,1997-06-26,1,['13.220.50'],ISO/TC 92/SC 1,9599,,[30661],"['en','fr']",26,

30335,IS,Cor,ISO 11925-2:1997/Cor 1:1998,Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 2: Single flame source test — Technical Corrigendum 1,Essais de réaction au feu — Allumabilité des produits du bâtiment soumis à l'incidence directe de la flamme — Partie 2: Essai à l'aide d'une source à flamme unique — Rectificatif technique 1,1998-07-09,1,['13.220.50'],ISO/TC 92/SC 1,9599,,[30661],"['en','fr']",2,

30661,IS,,ISO 11925-2:2002,Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 2: Single-flame source test,Essais de réaction au feu — Allumabilité des produits de bâtiment soumis à l'incidence directe de la flamme — Partie 2: Essai à l'aide d'une source à flamme unique,2002-01-31,2,['13.220.50'],ISO/TC 92/SC 1,9599,"[30335,21804]",[45782],"['en','fr']",24,

45782,IS,,ISO 11925-2:2010,Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test,Essais de réaction au feu — Allumabilité de produits soumis à l'incidence directe de la flamme — Partie 2: Essai à l'aide d'une source à flamme unique,2010-10-18,3,['13.220.50'],ISO/TC 92/SC 1,9599,[30661],[71204],"['en','fr']",26,<p>ISO 11925-2:2010 specifies a method of test for determining the ignitability of products by direct small flame impingement under zero impressed irradiance using vertically oriented test specimens.</p>

57951,IS,Cor,ISO 11925-2:2010/Cor 1:2011,Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test — Technical Corrigendum 1,Essais de réaction au feu — Allumabilité de produits soumis à l'incidence directe de la flamme — Partie 2: Essai à l'aide d'une source à flamme unique — Rectificatif technique 1,2011-01-20,3,['13.220.50'],ISO/TC 92/SC 1,9599,,[71204],['en'],1,

71204,IS,,ISO 11925-2:2020,Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test,Essais de réaction au feu — Allumabilité de produits soumis à l'incidence directe de la flamme — Partie 2: Essai à l'aide d'une source à flamme unique,2020-02-21,4,['13.220.50'],ISO/TC 92/SC 1,9599,"[45782,57951]",[89109],"['en','fr']",27,<p>This document specifies a method of test for determining the ignitability of products by direct small flame impingement under zero impressed irradiance using vertically oriented test specimens.</p><p>Information on the precision of the test method is given in Annex A (informative).</p><p>Information on t

20479,IS,,ISO 11929-1:2000,Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 1: Fundamentals and application to counting measurements without the influence of sample treatment,"Détermination de la limite de détection et du seuil de décision des mesurages des rayonnements ionisants — Partie 1: Principes fondamentaux et application aux mesurages par comptage, sans l'influence du traitement de l'échantillon",2000-06-29,1,['17.240'],ISO/TC 85/SC 2,9599,,[43810],"['en','fr']",14,

69579,IS,,ISO 11929-1:2019,"Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 1: Elementary applications","Détermination des limites caractéristiques (seuil de décision, limite de détection et extrémités de l'intervalle élargi) pour mesurages de rayonnements ionisants — Principes fondamentaux et applications — Partie 1: Applications élémentaires",2019-02-13,2,['17.240'],ISO/TC 85/SC 2,9599,[43810],[90839],"['en','fr']",41,"<p>The ISO 11929 series specifies a procedure, in the field of ionizing radiation metrology, for the calculation of the 'decision