Withdrawn and superseded ISO standards — page 24 of 246

33209,IS,,ISO 11713:2000,Carbonaceous materials used in the production of aluminium — Cathode blocks and baked anodes — Determination of electrical resistivity at ambient temperature,Produits carbonés utilisés pour la production de l'aluminium — Blocs cathodiques et anodes cuites — Détermination de la résistivité électrique à la température ambiante,2000-05-18,1,['71.100.10'],ISO/TC 226,9599,,[86642],['en'],4,"<p>This International Standard specifies a method for the determination of the electrical resistivity of cathode blocks and</p><p>baked anodes used in the production of aluminium, using samples at ambient temperature.</p>"

5749,IS,,ISO 1172:1975,Textile glass reinforced plastics — Determination of loss on ignition,Matières plastiques renforcées au verre textile — Détermination de la perte au feu,1975-06-01,1,"['83.120','13.220.40']",ISO/TC 61/SC 13,9599,,[5750],"['en','fr']",3,

5750,IS,,ISO 1172:1996,"Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods","Plastiques renforcés de verre textile — Préimprégnés, compositions de moulage et stratifiés — Détermination des taux de verre textile et de charge minérale — Méthodes par calcination",1996-12-26,2,['83.120'],ISO/TC 61/SC 13,9599,[5749],[84260],"['en','fr']",8,<p>Gives two calcination methods for the determination of the textile-glass and mineral-filler content of glass-reinforced plastics. Method A is used for the determination of the textile-glass content when no mineral fillers are present; method B is

19646,IS,,ISO 11722:1999,Solid mineral fuels — Hard coal — Determination of moisture in the general analysis test sample by drying in nitrogen,Combustibles minéraux solides — Houille — Détermination de l'humidité de l'échantillon pour analyse par dessiccation en atmosphère d'azote,1999-04-22,1,['73.040'],ISO/TC 27/SC 5,9599,,[62610],['en'],5,

40597,IS,,ISO 11723:2004,Solid mineral fuels — Determination of arsenic and selenium — Eschka's mixture and hydride generation method,Combustibles minéraux solides — Dosage de l'arsenic et du sélénium — Mélange d'Eschka et méthode par production d'hydrure,2004-11-08,1,['73.040'],ISO/TC 27/SC 5,9599,,[70209],['en'],6,"<p>ISO 11723:2004 specifies a method using Eschka's mixture during ashing, extraction of the ash residue with acid, and hydride generation atomic absorption spectrometry or hydride generation atomic fluorescence spectrometry, for the determination of arsenic and selenium in coal and coke ash.</p>"

70209,IS,,ISO 11723:2016,Solid mineral fuels — Determination of arsenic and selenium — Eschka's mixture and hydride generation method,Combustibles minéraux solides — Dosage de l'arsenic et du sélénium — Mélange d'Eschka et méthode par production d'hydrure,2016-11-18,2,['73.040'],ISO/TC 27/SC 5,9599,[40597],[86991],['en'],6,"<p>ISO 11723:2016 specifies a method using Eschka's mixture during ashing, extraction of the ash residue with acid, and hydride generation atomic absorption spectrometry or hydride generation atomic fluorescence spectrometry, for the determination of arsenic and selenium in solid mineral fuels.</p>"

40598,IS,,ISO 11724:2004,"Solid mineral fuels — Determination of total fluorine in coal, coke and fly ash","Combustibles minéraux solides — Détermination de la teneur totale en fluor dans le charbon, le coke et les cendres",2004-11-17,1,['73.040'],ISO/TC 27/SC 5,9599,,[70210],['en'],11,"<p>ISO 11724:2004 specifies a method for the determination of total fluorine in coal, coke and fly ash.</p>"

70210,IS,,ISO 11724:2016,"Solid mineral fuels — Determination of total fluorine in coal, coke and fly ash","Combustibles minéraux solides — Détermination de la teneur totale en fluor dans le charbon, le coke et les cendres",2016-11-29,2,['73.040'],ISO/TC 27/SC 5,9599,[40598],[75881],['en'],11,"<p>ISO 11724:2016 specifies a method for the determination of total fluorine in coal, coke and fly ash.</p><p>From measurement of the total fluorine alone, it is not possible to estimate the amount of fluorine released to the environment by utilization of the coal and subsequent disposal of the ash residue.</p>"

40226,IS,,ISO 11726:2004,Solid mineral fuels — Guidelines for the validation of alternative methods of analysis,Combustibles minéraux solides — Lignes directrices pour la validation de variantes analytiques,2004-08-13,1,['75.160.10'],ISO/TC 27/SC 5,9599,,[70841],['en'],24,"<p>ISO 11726:2004 describes procedures for validating alternative methods of analysis for coal and coke either directly by comparison with the relevant International Standard method or indirectly by comparison with reference materials that have been exhaustively analysed using the relevant International Standard method.</p><p>The statistical analysis methods used are parametric, i.e. their use is possible only when the cha

5753,IS,,ISO 1173:1975,Assembly tools for bolts and screws — Hexagon drive ends for power tools,Outils de manoeuvre pour vis et écrous — Hexagones conducteurs pour outils à machine,1975-02-01,1,['25.140.30'],ISO/TC 29,9599,,[5754],"['en','fr']",3,

5754,IS,,ISO 1173:1988,Assembly tools for bolts and screws — Hexagon drive ends for hand- and machine-operated screwdriver bits,Outils de manoeuvre pour vis et écrous — Hexagones conducteurs pour embouts de tournevis à main et à machine,1988-03-03,2,['25.140.01'],ISO/TC 29/SC 10,9599,[5753],[23588],"['en','fr']",4,

19653,IS,,ISO 11731:1998,Water quality — Detection and enumeration of Legionella,Qualité de l'eau — Recherche et dénombrement des Legionella,1998-04-30,1,['07.100.20'],ISO/TC 147/SC 4,9599,,"[61782,39366]","['en','fr']",16,

32326,IS,,ISO 11731-2:2004,Water quality — Detection and enumeration of Legionella — Part 2: Direct membrane filtration method for waters with low bacterial counts,Qualité de l'eau — Recherche et dénombrement des Legionella — Partie 2: Méthode par filtration directe sur membrane pour les eaux à faible teneur en bactéries,2004-04-26,1,['07.100.20'],ISO/TC 147/SC 4,9599,,[61782],"['en','fr']",9,"<p>ISO 11731-2:2004 describes a monitoring method for the isolation and enumeration of <i>Legionella</i> organisms in water intended for human use (e.g. hot and cold water, water used for washing), for human consumption and for treated bathing waters (e.g. swimming pools). It is especially suitable for

19654,IS,,ISO 11732:1997,Water quality — Determination of ammonium nitrogen by flow analysis (CFA and FIA) and spectrometric detection,Qualité de l'eau — Détermination de l'azote ammoniacal par analyse en flux (CFA et FIA) et détection spectrométrique,1997-06-26,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[38924],"['en','fr']",17,

19655,IS,,ISO 11733:1995,Water quality — Evaluation of the elimination and biodegradability of organic compounds in an aqueous medium — Activated sludge simulation test,Qualité de l'eau — Évaluation de l'élimination et de la biodégradabilité des composés organiques en milieu aqueux — Essai de simulation des boues activées,1995-11-30,1,['13.060.70'],ISO/TC 147/SC 5,9599,,[34416],"['en','fr']",14,<p>Specifies a method for the evaluation of the elimination and biodegradability of non-volatile organic compounds at a given concentration by aerobic microorganisms. The conditions described simulate a waste-water treatment plant.</p>

19659,IS,,ISO 11737-1:1995,Sterilization of medical devices — Microbiological methods — Part 1: Estimation of population of microorganisms on products,Stérilisation des dispositifs médicaux — Méthodes microbiologiques — Partie 1: Estimation de la population de micro-organismes sur les produits,1995-11-30,1,"['11.080.01','07.100.10']",ISO/TC 198,9599,,[38711],['en'],19,<p>Specifies general criteria for the estimation of the population of viable microorganisms on medical devices or packages. Not applicable for the enumeration or identification of viral contamination and to the microbiological monitoring of the environment in which medical devices are manufactured.</p>

38711,IS,,ISO 11737-1:2006,Sterilization of medical devices — Microbiological methods — Part 1: Determination of a population of microorganisms on products,Stérilisation des dispositifs médicaux — Méthodes microbiologiques — Partie 1: Détermination d'une population de micro-organismes sur des produits,2006-03-20,2,"['11.080.01','07.100.10']",ISO/TC 198,9599,"[33964,19659]",[66451],"['en','fr']",35,"<p>ISO 11737-1:2006 specifies requirements and provides guidance for the enumeration and microbial characterization of the population of viable micro-organisms on or in a medical device, component, raw material or package.</p>"

46116,IS,Cor,ISO 11737-1:2006/Cor 1:2007,Sterilization of medical devices — Microbiological methods — Part 1: Determination of a population of microorganisms on products — Technical Corrigendum 1,Stérilisation des dispositifs médicaux — Méthodes microbiologiques — Partie 1: Détermination d'une population de micro-organismes sur des produits — Rectificatif technique 1,2007-05-11,2,"['11.080.01','07.100.10']",ISO/TC 198,9599,,[66451],"['en','fr']",1,

23267,IS,,ISO 11737-2:1998,Sterilization of medical devices — Microbiological methods — Part 2: Tests of sterility performed in the validation of a sterilization process,Stérilisation des dispositifs médicaux — Méthodes microbiologiques — Partie 2: Essais de stérilité pratiqués en cours de validation d'un procédé de stérilisation,1998-07-09,1,"['11.080.01','07.100.10']",ISO/TC 198,9599,,[44955],"['en','fr']",13,

44955,IS,,ISO 11737-2:2009,"Sterilization of medical devices — Microbiological methods — Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process","Stérilisation des dispositifs médicaux — Méthodes microbiologiques — Partie 2: Contrôles de stérilité pratiqués au moment de la définition, de la validation et de la maintenance d'un procédé de stérilisation",2009-11-06,2,"['11.080.01','07.100.10']",ISO/TC 198,9599,[23267],[70801],"['en','fr']",16,"<p>ISO 11737-2:2009 specifies the general criteria for tests of sterility on medical devices that have been exposed to a treatment with the sterilizing agent reduced relative to that anticipated to b

33964,IS,,ISO 11737-3:2004,Sterilization of medical devices — Microbiological methods — Part 3: Guidance on evaluation and interpretation of bioburden data,Stérilisation des dispositifs médicaux — Méthodes microbiologiques — Partie 3: Lignes directrices sur l'évaluation et l'interprétation de données de charge biologique,2004-07-13,1,"['11.080.01','07.100.10']",ISO/TC 198,9599,,[38711],['en'],8,<p>ISO 11737-3:2004 provides guidance on evaluating and interpreting the data generated during routine monitoring of the microbiological quality of medical devices.</p><p>ISO 11737-3:2004 is not applicable to the use of bioburden data generated for establishing the extent of treatment to be applied in

19660,IS,,ISO 11738:2000,Agricultural irrigation equipment — Control heads,Matériel agricole d'irrigation — Installations de tête,2000-03-16,1,['65.060.35'],ISO/TC 23/SC 18,9599,,[78120],"['en','fr']",13,"<p>This International Standard specifies requirements for the components and method of installation of pressurized</p><p>irrigation system control heads, referred to hereinafter as irrigation control heads, with a nominal size of up to and</p><p>including 200 mm.</p><p>This International Standard is applicable only to the above-ground components of irrigation control heads for</p><p>sprinkler irrigation and micro-irrigation (mini-sprinklers, drip irrigation, etc.). It is applicable to the b

23590,IS,,ISO 1174-1:1996,Assembly tools for screws and nuts — Driving squares — Part 1: Driving squares for hand socket tools,Outils de manoeuvre pour vis et écrous — Carrés d'entraînement — Partie 1: Carrés d'entraînement pour outils à main,1996-11-28,1,['25.140.30'],ISO/TC 29/SC 10,9599,"[5757,5756]",[53384],"['en','fr']",6,<p>Specifies the dimensions and designation of driving squares for hand socket tools.</p>

5756,IS,,ISO 1174:1975,Assembly tools for bolts and screws — Driving squares for power socket wrenches and hand socket wrenches,Outils de manoeuvre pour vis et écrous — Carrés d'entraînement pour douilles à machine et douilles à main,1975-04-01,3,['25.140.01'],ISO/TC 29/SC 10,9599,[5755],"[23590,25445]","['en','fr']",5,

5757,IS,Amd,ISO 1174:1975/Amd 1:1981,Assembly tools for bolts and screws — Driving squares for power socket wrenches and hand socket wrenches — Amendment 1,Outils de manoeuvre pour vis et écrous — Carrés d'entraînement pour douilles à machine et douilles à main — Amendement 1,1981-12-01,3,['25.140.01'],ISO/TC 29,9599,,"[23590,25445]","['en','fr']",1,

50725,IS,,ISO 11745:2010,Brazing for aerospace applications — Qualification test for brazers and brazing operators — Brazing of metallic components,Brasage fort pour applications aérospatiales — Épreuve de qualification des braseurs et des opérateurs braseurs — Brasage fort des composants métalliques,2010-07-12,1,['25.160.01'],ISO/TC 44/SC 14,9599,,[81868],"['en','fr','ru']",17,<p>ISO 11745:2010 specifies a qualification test for brazers engaged in manual brazing of parts and brazing operators in aerospace construction.</p>

61127,IS,Amd,ISO 11745:2010/Amd 1:2015,Brazing for aerospace applications — Qualification test for brazers and brazing operators — Brazing of metallic components — Amendment 1,Brasage fort pour applications aérospatiales — Épreuve de qualification des braseurs et des opérateurs braseurs — Brasage fort des composants métalliques — Amendement 1,2015-04-16,1,['25.160.01'],ISO/TC 44/SC 14,9599,,[81868],"['en','fr']",1,

50735,IS,,ISO 11746:2012,Rice — Determination of biometric characteristics of kernels,Riz — Détermination des caractéristiques biométriques des grains,2012-01-20,1,['67.060'],ISO/TC 34/SC 4,9599,,[75733],"['en','fr']",7,

71600,IS,Amd,ISO 11746:2012/Amd 1:2017,Rice — Determination of biometric characteristics of kernels — Amendment 1,Riz — Détermination des caractéristiques biométriques des grains — Amendement 1,2017-10-17,1,['67.060'],ISO/TC 34/SC 4,9599,,[75733],"['en','fr']",1,

19671,IS,,ISO 11749:1995,Belt drive — V-ribbed belts for the automotive industry — Fatigue test,Transmissions par courroies — Courroies striées pour la construction automobile — Essai de fatigue,1995-11-02,1,['43.060.10'],ISO/TC 41/SC 1,9599,,[55528],"['en','fr']",8,<p>Refers to a dynamic test method for the quality control of V-ribbed belts which are used predominantly in the automotive industry. The dimensional characteristics of the belts and of corresponding pulleys are the subject of ISO 9981.</p>

38222,IS,Cor,ISO 11749:1995/Cor 1:2003,Belt drive — V-ribbed belts for the automotive industry — Fatigue test — Technical Corrigendum 1,Transmissions par courroies — Courroies striées pour la construction automobile — Essai de fatigue — Rectificatif technique 1,2003-04-04,1,['43.060.10'],ISO/TC 41/SC 1,9599,,[55528],"['en','fr']",2,

55528,IS,,ISO 11749:2014,Belt drive — V-ribbed belts for the automotive industry — Fatigue test,Transmissions par courroies — Courroies striées pour la construction automobile — Essai de fatigue,2014-02-03,2,"['43.060.10','21.220.10']",ISO/TC 41/SC 1,9599,"[19671,38222]",[84168],['en'],11,<p>ISO 11749:2014 specifies a dynamic test method for the quality control of V-ribbed belts (PK profile) which are used predominantly for accessory drive applications in the automotive industry.</p>

19675,IS,,ISO 11754:1994,Space data and information transfer systems — Telemetry channel coding,Systèmes de transfert des informations et données spatiales — Codage de canal pour télémesure,1994-10-20,1,['49.140'],ISO/TC 20/SC 13,9599,,[33004],"['en','fr']",1,<p>Specifies the requirements for telemetry channel coding for space date and information transfer systems for civil space applications.</p>

33004,IS,,ISO 11754:2003,Space data and information transfer systems — Telemetry channel coding,Systèmes de transfert des informations et données spatiales — Codage de canal pour télémesure,2003-02-12,2,['49.140'],ISO/TC 20/SC 13,9599,[19675],[38562],['en'],65,<p>ISO 11754:2003 specifies the requirements for telemetry channel coding of space data and information transfer systems used in civil space applications.</p>

19676,IS,,ISO 11755:1996,Cylinders in bundles for permanent and liquefiable gases (excluding acetylene) — Inspection at time of filling,Bouteilles à gaz sur cadres pour gaz permanents et liquéfiés (à l'exclusion de l'acétylène) — Contrôle au moment du remplissage,1996-12-19,1,['23.020.35'],ISO/TC 58/SC 4,9599,,[35969],"['en','fr']",5,<p>Applies to single gas cylinders of water capacity up to 150 l manifolded to a bundle. Specifies minimum requirements for inspection at time of filling. Applies to cylinders for permanent and liquefied gases. Does not apply to cylinder bundles for acetylene gas.</p>

19678,IS,,ISO 11758:1995,Rubber and plastics hoses — Exposure to a xenon arc lamp — Determination of changes in colour and appearance,Tuyaux en caoutchouc et en plastique — Exposition à la lampe à arc au xénon — Détermination du changement de coloration et d'aspect,1995-08-10,1,['23.040.70'],ISO/TC 45/SC 1,9599,,[45700],"['en','fr']",8,<p>Specifies a method for exposing rubber and plastics hoses for the evaluation of the changes in colour and appearance. The exposition is carried out with a xenon arc lamp that yields a spectrum closely similar to that of daylight.</p>

30766,IS,Cor,ISO 11758:1995/Cor 1:1998,Rubber and plastics hoses — Exposure to a xenon arc lamp — Determination of changes in colour and appearance — Technical Corrigendum 1,Tuyaux en caoutchouc et en plastique — Exposition à la lampe à arc au xénon — Détermination du changement de coloration et d'aspect — Rectificatif technique 1,1998-07-23,1,['23.040.70'],ISO/TC 45/SC 1,9599,,[45700],"['en','fr']",1,

5759,IS,,ISO 1176:1974,Road vehicles — Weights — Vocabulary,Véhicules routiers — Poids — Vocabulaire,1974-11-01,1,"['43.020','01.040.43']",ISO/TC 22,9599,,[5760],"['en','fr']",6,

38898,IS,,ISO 11760:2005,Classification of coals,Classification des charbons,2005-02-18,1,['73.040'],ISO/TC 27/SC 5,9599,,[75705],['en'],9,"<p>ISO 11760:2005 describes a simple classification system for coals providing guidance on the selection of the appropriate ISO standard procedures for the analyses and testing, international comparison in terms of some key characteristics and descriptive categorization of coals. The system is applicable to coals of all ranks, but care is required in relation to the classification of some types of coal. It is also applicable to a wide range of representative coal samples, provided their exact nature is stated. Such samples include bore-core seam sections

5761,IS,,ISO 1177:1973,Information processing — Character structure for start/stop and synchronous transmission,Traitement de l'information — Structure des caractères pour la transmission série arythmique et synchrone,1973-11-01,1,['35.100.20'],ISO/IEC JTC 1/SC 2,9599,,[5762],"['en','fr']",2,

39122,IS,,ISO 11783-1:2007,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 1: General standard for mobile data communication,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 1: Système normalisé général pour les communications de données avec les équipements mobiles,2007-06-20,1,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,,[57556],"['en','fr','ru']",94,"<p>ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to stand

39124,IS,,ISO 11783-10:2009,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 10: Task controller and management information system data interchange,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 10: Contrôleur de tâches et échange de données des systèmes d'information de gestion,2009-12-08,1,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,,[61581],"['en','fr']",101,"<p>ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi‑mounted, towed or self-propelled implements. Its purpose i

39125,IS,,ISO 11783-11:2007,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 11: Mobile data element dictionary,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 11: Dictionnaire d'éléments de données mobiles,2007-03-30,1,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,,[57849],"['en','fr','ru']",3,"<p>ISO 11783 specifies a serial data network for control and communications on forestry or agricultural tractors, mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensor, actuators,

38784,IS,,ISO 11783-12:2009,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 12: Diagnostics services,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 12: Services de diagnostic,2009-02-26,1,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,,[59381],"['en','fr']",24,"<p>ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi‑mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements a

59381,IS,,ISO 11783-12:2014,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 12: Diagnostics services,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 12: Services de diagnostic,2014-09-09,2,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,[38784],[71184],"['en','fr']",35,"<p>ISO 11783, as a whole, specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed, or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control

38209,IS,,ISO 11783-13:2007,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 13: File server,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 13: Serveur de fichiers,2007-06-01,1,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,,[56765],"['en','fr','ru']",38,"<p>ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements, and inf

56765,IS,,ISO 11783-13:2011,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 13: File server,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 13: Serveur de fichiers,2011-04-01,2,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,[38209],[78296],"['en','fr']",46,"<p>ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements and in

25238,IS,,ISO 11783-2:2002,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 2: Physical layer,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 2: Couche physique,2002-05-02,1,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,,[54389],"['en','fr']",48,

39172,IS,Amd,ISO 11783-2:2002/Amd 1:2006,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 2: Physical layer — Amendment 1,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 2: Couche physique — Amendement 1,2006-04-07,1,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,,[54389],"['en','fr']",4,

38699,IS,Cor,ISO 11783-2:2002/Cor 1:2003,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 2: Physical layer — Technical Corrigendum 1,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 2: Couche physique — Rectificatif technique 1,2003-06-25,1,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,,[54389],"['en','fr']",1,

54389,IS,,ISO 11783-2:2012,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 2: Physical layer,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 2: Couche physique,2012-02-24,2,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,"[25238,39172,38699]",[71171],"['en','fr']",50,"<p>ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control eleme

62813,IS,Cor,ISO 11783-2:2012/Cor 1:2012,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 2: Physical layer — Technical Corrigendum 1,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 2: Couche physique — Rectificatif technique 1,2012-11-05,2,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,,[71171],"['en','fr']",1,

25239,IS,,ISO 11783-3:1998,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 3: Data link layer,Tracteurs et machines agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 3: Couche liaison de données,1998-07-02,1,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,,[41160],"['en','fr']",29,

41160,IS,,ISO 11783-3:2007,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 3: Data link layer,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 3: Couche liaison de données,2007-10-01,2,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,[25239],[57554],"['en','fr']",42,"<p>ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements

57554,IS,,ISO 11783-3:2014,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 3: Data link layer,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 3: Couche liaison de données,2014-05-19,3,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,[41160],[71172],"['en','fr']",61,"<p>ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements

71172,IS,,ISO 11783-3:2018,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 3: Data link layer,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 3: Couche liaison de données,2018-11-02,4,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,[57554],[89949],"['en','fr']",62,"<p>This document specifies the application, the network layer protocols and the mapping to the controller area network (CAN) data link layer protocol as specified in ISO 11898-1. The application layer specifies protocol data units (PDU), which can be mapped to Classical CAN data frames using the Classi

25240,IS,,ISO 11783-4:2001,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 4: Network layer,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 4: Couche réseau,2001-05-10,1,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,,[50577],"['en','fr']",14,

25241,IS,,ISO 11783-5:2001,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 5: Network management,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 5: Gestion du réseau,2001-05-10,1,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,,[50578],"['en','fr']",20,

37160,IS,Cor,ISO 11783-5:2001/Cor 1:2002,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 5: Network management — Technical Corrigendum 1,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 5: Gestion du réseau — Rectificatif technique 1,2002-06-20,1,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,,[50578],"['en','fr']",1,

50578,IS,,ISO 11783-5:2011,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 5: Network management,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 5: Gestion du réseau,2011-03-29,2,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,"[25241,37160]",[74366],"['en','fr']",29,"<p>ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control eleme

25242,IS,,ISO 11783-6:2004,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 6: Virtual terminal,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 6: Terminal virtuel,2004-06-15,1,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,,[42725],"['en','fr']",136,"<p>ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensor, actuators, control elements, and informati

42788,IS,Cor,ISO 11783-6:2004/Cor 1:2005,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 6: Virtual terminal — Technical Corrigendum 1,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 6: Terminal virtuel — Rectificatif technique 1,2005-10-13,1,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,,[42725],"['en','fr']",4,

42725,IS,,ISO 11783-6:2010,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 6: Virtual terminal,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 6: Terminal virtuel,2010-10-18,2,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,"[25242,42788]",[61646],"['en','fr']",259,"<p>ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control element

61646,IS,,ISO 11783-6:2014,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 6: Virtual terminal,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 6: Terminal virtuel,2014-07-02,3,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,"[57791,42725]",[71173],"['en','fr']",302,"<p>ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors, mounted, semi‑mounted, towed or self propelled implements. Its purpose is to standardize the method and format of transfer of data between sensor, actuators, control elements, i

25243,IS,,ISO 11783-7:2002,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 7: Implement messages application layer,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 7: Couche d'application de base,2002-09-12,1,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,,[45366],"['en','fr']",96,"<p>ISO 11783-7 specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensor, actuators, control e

40911,IS,Cor,ISO 11783-7:2002/Cor 1:2004,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 7: Implement messages application layer — Technical Corrigendum 1,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 7: Couche d'application de base — Rectificatif technique 1,2004-10-18,1,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,,[45366],"['en','fr']",5,

45366,IS,,ISO 11783-7:2009,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 7: Implement messages application layer,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 7: Couche d'application de base,2009-05-07,2,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,"[40911,25243]",[59380],"['en','fr']",144,"<p>ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi‑mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sen

59380,IS,,ISO 11783-7:2015,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 7: Implement messages application layer,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 7: Couche d'application de base,2015-04-01,3,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,[45366],"[71174,78295]","['en','fr']",185,"<p>ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sen

73001,IS,Amd,ISO 11783-7:2015/Amd 1:2018,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 7: Implement messages application layer — Amendment 1,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 7: Couche d'application de base — Amendement 1,2018-06-21,3,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,,[78295],"['en','fr']",32,

25245,IS,,ISO 11783-9:2002,Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 9: Tractor ECU,Tracteurs et matériels agricoles et forestiers — Réseaux de commande et de communication de données en série — Partie 9: Unité de commande électronique du tracteur,2002-07-04,1,"['65.060.01','35.240.99']",ISO/TC 23/SC 19,9599,,[54390],"['en','fr']",11,"<p>This part of ISO 11783 specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensor, actuators, control e

3256,IS,,ISO 11784:1994,Agricultural equipment — Animal electronic identification — Code structure,Matériel agricole — Identification électronique des animaux — Structure du code,1994-05-19,1,['65.040.99'],ISO/TC 23/SC 19,9599,,[25881],"['en','fr']",2,

25881,IS,,ISO 11784:1996,Radio frequency identification of animals — Code structure,Identification des animaux par radiofréquence — Structure du code,1996-08-15,2,['65.040.99'],ISO/TC 23/SC 19,9599,[3256],[83944],"['en','fr']",2,<p>Contains the structure of the radio-frequency identification code for animals. Does not specify the characteristics of the transmission protocols between transponder and transceiver. Replaces the first edition.</p>

38799,IS,Amd,ISO 11784:1996/Amd 1:2004,Radio frequency identification of animals — Code structure — Amendment 1,Identification des animaux par radiofréquence — Structure du code — Amendement 1,2004-11-23,2,['65.040.99'],ISO/TC 23/SC 19,9599,,[83944],"['en','fr']",2,

45365,IS,Amd,ISO 11784:1996/Amd 2:2010,Radio frequency identification of animals — Code structure — Amendment 2: Indication of an advanced transponder,Identification des animaux par radiofréquence — Structure du code — Amendement 2: Identification d'un transpondeur évolué,2010-05-12,2,['65.040.99'],ISO/TC 23/SC 19,9599,,[83944],"['en','fr']",1,

19982,IS,,ISO 11785:1996,Radio frequency identification of animals — Technical concept,Identification des animaux par radiofréquence — Concept technique,1996-10-10,1,['65.040.99'],ISO/TC 23/SC 19,9599,,[91012],"['en','fr']",13,

53035,IS,Cor,ISO 11785:1996/Cor 1:2008,Radio frequency identification of animals — Technical concept — Technical Corrigendum 1,Identification des animaux par radiofréquence — Concept technique — Rectificatif technique 1,2008-12-09,1,['65.040.99'],ISO/TC 23/SC 19,9599,,[91012],['fr'],,

3247,IS,,ISO 11787:1995,Machinery for agriculture and forestry — Data interchange between management computer and process computers — Data interchange syntax,Machines agricoles et forestières — Transfert de données entre l'ordinateur de gestion et les ordinateurs de contrôle de process — Échange des données (syntaxe),1995-06-08,1,['65.060.99'],ISO/TC 23/SC 19,9599,,[38405],"['en','fr']",13,"<p>Provides the means to enable communication between on-farm process computers of stationary and mobile agricultural equipment or machinery, and management computers. Specifies an Agricultural Data Interchange Syntax (ADIS) to exchange data electronically. It implies that the syntax is not intended for r

19984,IS,,ISO 11788-1:1997,Electronic data interchange between information systems in agriculture — Agricultural data element dictionary — Part 1: General description,Echange de données informatisé entre systèmes d'information en agriculture — Dictionnaire de données agricoles — Partie 1: Description générale,1997-10-02,1,"['65.020.01','35.240.99']",ISO/TC 23/SC 19,9599,,[45464],"['en','fr']",10,

26400,IS,,ISO 11788-2:2000,Electronic data interchange between information systems in agriculture — Agricultural data element dictionary — Part 2: Dairy farming,Échange de données informatisé entre systèmes d'information en agriculture — Dictionnaire de données agricoles — Partie 2: Exploitation laitière.,2000-03-09,1,"['65.020.01','35.240.99']",ISO/TC 23/SC 19,9599,,[45466],"['en','fr']",26,

26401,IS,,ISO 11788-3:2000,Electronic data interchange between information systems in agriculture — Agricultural data element dictionary — Part 3: Pig farming,Echange de données informatisé entre systèmes d'information en agriculture — Dictionnaire de données agricoles — Partie 3: Elevage porcin,2000-04-13,1,"['65.020.01','35.240.99']",ISO/TC 23/SC 19,9599,,[45463],"['en','fr']",20,

41707,IS,,ISO 1179-1:2007,Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports,Raccordements pour applications générales et transmissions hydrauliques et pneumatiques — Orifices et éléments mâles à filetage ISO 228-1 à joint en élastomère ou étanchéité métal sur métal — Partie 1: Orifices filetés,2007-08-13,1,['23.100.40'],ISO/TC 131/SC 4,9599,[5764],[60250],"['en','fr']",5,"<p>ISO 1179-1:2007 specifies dimensions for ports with ISO 228-1 threads for use with non-adjustable stud ends shown in ISO 1179-2, ISO 1179-3 and ISO 1179-4 and with adjustable stud ends shown in ISO 1179-3.</p>" 4170

5764,IS,,ISO 1179:1981,"Pipe connections, threaded to ISO 228/1, for plain end steel and other metal tubes in industrial applications","Raccordements de tuyauteries, filetés selon ISO 228/1, pour tubes à extrémités lisses en acier et autres tubes métalliques dans les applications industrielles",1981-10-01,2,['23.100.40'],ISO/TC 131/SC 4,9599,[6668],"[36097,36048,41710,41707,41708,41709]","['en','fr']",3,<p>This second edition cacncels replaces the first edition (1973). Establishes a limited range of threads for connenction of tubes to machines or equipment and indicates the related outside diameters of the tubes. The outside diameters ranging from 4 mm up to and including 50 mm.</p>

41708,IS,,ISO 1179-2:2007,Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E),Raccordements pour applications générales et transmissions hydrauliques et pneumatiques — Orifices et éléments mâles à filetage ISO 228-1 et joint en élastomère ou étanchéité métal sur métal — Partie 2: Éléments mâles de séries légère (série L) et lourde (série S) avec joint en élastomère (type E),2007-08-13,1,['23.100.40'],ISO/TC 131/SC 4,9599,[5764],[60889],"['en','fr']",10,"<p>ISO 1179-2:2007 specifies dimensions, performance require

60889,IS,,ISO 1179-2:2013,Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E),Raccordements pour applications générales et transmissions hydrauliques et pneumatiques — Orifices et éléments mâles à filetage ISO 228-1 et joint en élastomère ou étanchéité métal sur métal — Partie 2: Éléments mâles de séries légère (série L) et lourde (série S) avec joint en élastomère (type E),2013-10-22,2,['23.100.40'],ISO/TC 131/SC 4,9599,"[52446,41708]",[79702],"['en','fr']",10,"<p>ISO 1179-2:2013 specifies dimensions, performanc

50819,IS,,ISO 11790:2010,"Copper, lead, zinc and nickel concentrates — Guidelines for the inspection of mechanical sampling systems","Concentrés de cuivre, de plomb, de zinc et de nickel — Lignes directrices pour le contrôle des systèmes mécaniques d'échantillonnage",2010-09-10,1,['73.060.99'],ISO/TC 183,9599,,[71138],['en'],19,"<p>ISO 11790:2010 sets out recommended practices for the inspection of mechanical sampling systems. It serves as a reference for conformance with applicable International Standards for copper, lead, zinc and nickel concentrates. </p><p>ISO 11790:2010 covers general considerations, including precision, quality variation, bias, establishment of inspection systems and i

50820,IS,,ISO 11794:2010,"Copper, lead, zinc and nickel concentrates — Sampling of slurries","Concentrés de cuivre, de plomb, de zinc et de nickel — Échantillonnage des schlamms",2010-09-21,1,['73.060.99'],ISO/TC 183,9599,,[71139],['en'],42,"<p>ISO 11794:2010 sets out the basic methods for sampling particulate material that is mixed with a liquid, usually water, to form a slurry. In industry and in the mining and mineral processing literature, slurry is also referred to as pulp, but this term is not used in ISO 11794:2010. At very high ratios of fine particulate solids to liquids where material assumes a soft plastic form, the mixture is correctly termed as a paste. Sampling of pastes is not

2693,IS,,ISO 11795:1997,Agricultural tractor drive wheel tyres — Method of measuring tyre rolling circumference,Pneumatiques pour roues motrices de tracteurs agricoles — Méthode de mesure de la circonférence de roulement,1997-12-18,1,['83.160.30'],ISO/TC 31/SC 5,9599,,[73299],"['en','fr']",4,

46504,IS,Amd,ISO 11795:1997/Amd 1:2010,Agricultural tractor drive wheel tyres — Method of measuring tyre rolling circumference — Amendment 1,Pneumatiques pour roues motrices de tracteurs agricoles — Méthode de mesure de la circonférence de roulement — Amendement 1,2010-04-15,1,['83.160.30'],ISO/TC 31/SC 5,9599,,[73299],"['en','fr']",7,

20031,IS,,ISO 11798:1999,"Information and documentation — Permanence and durability of writing, printing and copying on paper — Requirements and test methods","Information et documentation — Permanence et durabilité de l'écriture, de l'impression et de la reprographie sur des documents papier — Prescriptions et méthodes d'essai",1999-07-15,1,['01.140.20'],ISO/TC 46/SC 10,9599,,[83118],"['en','fr']",12,"<p>This International Standard specifies requirements and test methods for evaluation of the permanence and</p><p>durability of writing, printing and copying on paper stored in libraries, archives and other protected environments for</p><p>long periods of time.</p><p>It is applicable to</p><p>

38536,IS,,ISO 11799:2003,Information and documentation — Document storage requirements for archive and library materials,Information et documentation — Prescriptions pour le stockage des documents d'archives et de bibliothèques,2003-09-23,1,['01.140.20'],ISO/TC 46/SC 10,9599,,[63810],"['en','fr']",15,"<p>ISO 11799:2003 specifies the characteristics of general-purpose repositories used for the long-term storage of archive and library materials. It covers the sitting and construction of the building and the installation and equipment to be used.</p><p>It applies to all archive and library materials held in general-purpose repositories, where mixed media may be stored together. It does not prec

63810,IS,,ISO 11799:2015,Information and documentation — Document storage requirements for archive and library materials,Information et documentation — Exigences pour le stockage des documents d'archives et de bibliothèques,2015-12-14,2,['01.140.20'],ISO/TC 46/SC 10,9599,[38536],[82306],"['en','fr']",12,"<p>ISO 11799:2015 specifies the characteristics of repositories used for the long-term storage of archive and library materials. It covers the siting and construction and renovation of the building and the installation and equipment to be used both within and around the building.</p><p>It applies to all archive and library materials held in repositories, where mixed media may be stored toget

51130,IS,,ISO 11806-1:2011,"Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers — Part 1: Machines fitted with an integral combustion engine",Matériel agricole et forestier — Exigences de sécurité et essais pour débroussailleuses et coupe-herbe portatifs à moteur — Partie 1: Machines équipées d'un moteur à combustion interne intégré,2011-11-28,1,['65.060.80'],ISO/TC 23/SC 17,9599,[1716],[75687],"['en','fr']",29,"<p>ISO 11806-1:2011 gives safety requirements and measures for their verification for the design and construction of portable hand-held, powered brush-cutters and grass-trimmers (hereafter called mach

1716,IS,,ISO 11806:1997,Agricultural and forestry machinery — Portable hand-held combustion engine driven brush cutters and grass trimmers — Safety,Matériel agricole et forestier — Débroussailleuses et coupe-herbe portatifs à moteur thermique — Sécurité,1997-06-19,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[51130],"['en','fr']",29,

51136,IS,,ISO 11806-2:2011,"Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers — Part 2: Machines for use with back-pack power unit",Matériel agricole et forestier — Exigences de sécurité et essais pour débroussailleuses et coupe-herbe portatifs à moteur — Partie 2: Machines pour utilisation avec source motrice portée à dos,2011-11-28,1,['65.060.80'],ISO/TC 23/SC 17,9599,"[25801,25415]",[75688],"['en','fr']",6,"<p>ISO 11806-2:2011 gives safety requirements and measures for their verification for the design and construction of portable, hand-held, powered brush-cutters and grass-trimmers with a back-pack-moun

20617,IS,,ISO 11807-1:2001,Integrated optics — Vocabulary — Part 1: Basic terms and symbols,Optique intégrée — Vocabulaire — Partie 1: Termes fondamentaux et symboles,2001-07-19,1,"['31.260','01.040.31']",ISO/TC 172/SC 9,9599,,[72948],"['en','fr']",21,

27398,IS,,ISO 11807-2:2001,Integrated optics — Vocabulary — Part 2: Terms used in classification,Optique intégrée — Vocabulaire — Partie 2: Termes utilisés pour la classification,2001-07-05,1,"['31.260','01.040.31']",ISO/TC 172/SC 9,9599,,[72949],"['en','fr']",10,

5768,IS,,ISO 1181:1973,Three- or four-strand manila and sisal ropes,Cordages en manille et sisal à trois ou quatre torons,1973-09-01,1,['59.080.50'],ISO/TC 38,9599,,[5769],"['en','fr']",4,

5769,IS,,ISO 1181:1990,Ropes — Manila and sisal — Specification,Cordages — Abaca (manille) et sisal — Spécifications,1990-11-01,2,['59.080.50'],ISO/TC 38,9599,[5768],[36582],"['en','fr']",3,"<p>Specifies the main characteristics of 3-strand and 4-strand laid ropes and gives rules for their designation. Relates to the definitions given in ISO 1968. The main characteristics are shown in a table. This second edition cancels and replaces the first edition ISO 1181:1975, of which it constitutes a technical revision.</p>"

37587,IS,,ISO 11810-1:2005,Lasers and laser-related equipment — Test method and classification for the laser resistance of surgical drapes and/or patient protective covers — Part 1: Primary ignition and penetration,Lasers et équipements associés aux lasers — Méthode d'essai et classification de la résistance au laser pour des draps chirurgicaux et/ou des couvertures de protection des patients — Partie 1: Inflammation primaire et pénétration,2005-02-17,1,"['31.260','13.340.99','11.040.30']",ISO/TC 172/SC 9,9599,[35531],"[52958,65248]","['en','fr','ru']",11,"<p>ISO 11810-1:2005 is applicable to disposable and reusable, as well as woven and non-woven materials used as surgical drapes and other

37588,IS,,ISO 11810-2:2007,Lasers and laser-related equipment — Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers — Part 2: Secondary ignition,Lasers et équipements associés aux lasers — Méthode d'essai et classification de la résistance au laser pour des draps chirurgicaux et/ou des couvertures de protection des patients — Partie 2: Inflammation secondaire,2007-04-26,1,"['31.260','13.340.99','11.040.30']",ISO/TC 172/SC 9,9599,,[65248],"['en','fr']",11,"<p>ISO 11810-2:2007 is applicable to disposable and re-usable, as well as woven and non-woven materials used as surgical drapes and/or patient protective covers which claim to be laser