Withdrawn and superseded ISO standards — page 23 of 246

19549,IS,,ISO 11612:1998,Clothing for protection against heat and flame — Test methods and performance requirements for heat-protective clothing,Vêtements de protection contre la chaleur et les flammes — Méthodes d'essai et exigences de performance des vêtements de protection contre la chaleur,1998-07-30,1,['13.340.10'],ISO/TC 94/SC 13,9599,,[32324],"['en','fr']",7,

32324,IS,,ISO 11612:2008,Protective clothing — Clothing to protect against heat and flame,Vêtements de protection — Vêtements de protection contre la chaleur et les flammes,2008-10-22,2,['13.340.10'],ISO/TC 94/SC 13,9599,[19549],[57457],"['en','fr']",24,"<p>ISO 11612:2008 specifies performance requirements for garments made from flexible materials, which are designed to protect the wearer's body, except the hands, from heat and/or flame. For protection of the wearer's head and feet, the only items of protective clothing falling within the scope of this International Standard are gaiters, hoods and overboots. However, concerning hoods, requirements for visors and respiratory equipment are not

19550,IS,,ISO 11613:1999,Protective clothing for firefighters — Laboratory test methods and performance requirements,Vêtements de protection pour sapeurs-pompiers — Méthodes d'essai et exigences de performance,1999-12-16,1,['13.340.10'],ISO/TC 94/SC 14,9599,,"[60185,34078,60186,51377,60187,64815]","['en','fr']",37,

55034,IS,,ISO 11615:2012,Health informatics — Identification of medicinal products — Data elements and structures for the unique identification and exchange of regulated medicinal product information,Informatique de santé — Identification des médicaments — Éléments de données et structures pour l'identification unique et l'échange d'informations réglementées sur les médicaments,2012-10-26,1,['35.240.80'],ISO/TC 215,9599,,[70150],"['en','fr']",114,"<p>ISO 11615:2012 establishes definitions and concepts and describes data elements and their structural relationships, which are required for the unique identification and the detailed description of medicinal products.</p>"

55035,IS,,ISO 11616:2012,Health informatics — Identification of medicinal products — Data elements and structures for the unique identification and exchange of regulated pharmaceutical product information,Informatique de santé — Identification des médicaments — Éléments de données et structures pour l'identification unique et l'échange d'informations réglementées sur les produits pharmaceutiques,2012-10-26,1,['35.240.80'],ISO/TC 215,9599,,[70044],"['en','fr']",40,"<p>ISO 11616:2012 is intended to provide specific levels of information relevant to the identification of a medicinal product or group of medicinal products. It defines the data elements, structures and relationships between data e

50628,IS,,ISO 11617:2014,Buildings and civil engineering works — Sealants — Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling,Bâtiments et ouvrages de génie civil — Mastics — Détermination des variations de cohésion et apparence des mastics élastiques résistants aux intempéries après exposition d'éprouvettes statiquement polymérisées à un cycle mécanique et de vieillissement artificiel,2014-06-24,1,['91.100.50'],ISO/TC 59/SC 8,9599,,[80433],['en'],16,"<p>ISO 11617:201 specifies laboratory exposure procedures for determining the effects of cyclic movement and arti

5734,IS,,ISO 1162:1975,Cereals and pulses — Method of test for infestation by X-ray examination,Céréales et légumineuses — Méthode de détection de l'infestation au moyen des rayons X,1975-12-01,1,['67.060'],ISO/TC 34/SC 4,9599,,[13066],"['en','fr']",4,

19552,IS,,ISO 11620:1998,Information and documentation — Library performance indicators,Information et documentation — Indicateurs de performance des bibliothèques,1998-04-09,1,['01.140.20'],ISO/TC 46/SC 8,9599,,[37853],"['en','fr']",56,

34358,IS,Amd,ISO 11620:1998/Amd 1:2003,Information and documentation — Library performance indicators — Amendment 1: Additional performance indicators for libraries,Information et documentation — Indicateurs de performance des bibliothèques — Amendement 1: Indicateurs complémentaires de performance des bibliothèques,2003-01-08,1,['01.140.20'],ISO/TC 46/SC 8,9599,,[37853],"['en','fr']",13,

37853,IS,,ISO 11620:2008,Information and documentation — Library performance indicators,Information et documentation — Indicateurs de performance des bibliothèques,2008-08-05,2,['01.140.20'],ISO/TC 46/SC 8,9599,"[34359,19552,34358]",[56755],"['en','fr']",86,"<p>ISO 11620:2008 specifies the requirements of a performance indicator for libraries and establishes a set of performance indicators to be used by libraries of all types. It also provides guidance on how to implement performance indicators in libraries where such performance indicators are not already in use. The list and descriptions of the performance indicators are also summarized.</p><p>ISO 11620:2008 provides a standardized termino

56755,IS,,ISO 11620:2014,Information and documentation — Library performance indicators,Information et documentation — Indicateurs de performance des bibliothèques,2014-05-27,3,['01.140.20'],ISO/TC 46/SC 8,9599,[37853],[83126],"['en','fr']",100,"<p>ISO 11620:2014 is applicable to all types of libraries in all countries. However, not all performance indicators apply to all libraries. Limitations on the applicability of individual performance indicators are listed in the scope clause of the description of each indicator.</p><p>Performance indicators can be used for comparison over time within the same library. Comparisons between libraries can also be made, but only with caution. Comparisons b

34867,IS,,ISO 11623:2002,Transportable gas cylinders — Periodic inspection and testing of composite gas cylinders,Bouteilles à gaz transportables — Contrôles et essais périodiques des bouteilles à gaz en matériau composite,2002-03-28,1,['23.020.35'],ISO/TC 58/SC 4,9599,,[54963],"['en','fr']",37,

54963,IS,,ISO 11623:2015,Gas cylinders — Composite construction — Periodic inspection and testing,Bouteilles à gaz — Construction composite — Contrôles et essais périodiques,2015-11-18,2,['23.020.35'],ISO/TC 58/SC 4,9599,[34867],[76501],"['ar','en','fr']",28,"<p>ISO 11623:2015 specifies the requirements for periodic inspection and testing and to verify the integrity for further service of hoop-wrapped and fully-wrapped composite transportable gas cylinders, with aluminium-alloy, steel or non-metallic liners or of linerless construction (Types 2, 3, 4, and 5), intended for compressed, liquefied or dissolved gases under pressure, of water capacity from 0,5 l up to 450 l.</p><p>ISO 11623:2015 i

19557,IS,,ISO 11625:1998,Gas cylinders — Safe handling,Bouteilles à gaz — Sécurité de manutention,1998-05-21,1,['23.020.35'],ISO/TC 58/SC 4,9599,,[39814],"['en','fr']",11,

2129,IS,,ISO 11628:1995,Graphic technology — Prints and printing inks — Determination of resistance of prints to acids,Technologie graphique — Impressions et encres d'imprimerie — Détermination de la résistance des impressions aux acides,1995-05-11,1,['87.080'],ISO/TC 130,9599,,[37551],['en'],3,"<p>Specifies a method for assessing the resistance of prints to acids. Applicable to all printing processes and all printing substrates such as paper, board, plastics and metals.</p>"

5735,IS,,ISO 1163-1:1980,Plastics — Unplasticized compounds of homopolymers and copolymers of vinyl chloride — Part 1: Designation,Plastiques — Compositions non plastifiées d'homopolymères et copolymères de chlorure de vinyle — Partie 1: Désignation,1980-03-01,1,['83.080.20'],ISO/TC 61,9599,,[5736],['en'],2,

5736,IS,,ISO 1163-1:1985,Plastics — Unplasticized compounds of homopolymers and copolymers of vinyl chloride — Part 1: Designation,Plastiques — Compositions non plastifiées d'homopolymères et de copolymères de chlorure de vinyle — Partie 1: Désignation,1985-12-19,2,['83.080.20'],ISO/TC 61/SC 9,9599,[5735],[23984],"['en','fr']",4,

23984,IS,,ISO 1163-1:1995,Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Poly(chlorure de vinyle) non plastifié (PVC-U) pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,1995-12-27,3,['83.080.20'],ISO/TC 61/SC 9,9599,[5736],"[45076,70509]","['en','fr']",5,<p>Gives a system of designation for unplasticized polyvinyl chloride (PVC-U) moulding and extrusion materials which may be used as the basis for specifications. Applicable to all unplasticized polyvinyl chloride compositions that contain at least 50 % m/m of vinyl chloride. Does not apply to cel

5737,IS,,ISO 1163-2:1980,Plastics — Unplasticized compounds of homopolymers and copolymers of vinyl chloride — Part 2: Determination of properties,Plastiques — Compositions non plastifiées d'homopolymères et de copolymères de chlorure de vinyle — Partie 2: Détermination des propriétés,1980-02-01,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[5738],"['en','fr']",3,

5738,IS,,ISO 1163-2:1995,Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Poly(chlorure de vinyle) non plastifié (PVC-U) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,1995-08-03,2,['83.080.20'],ISO/TC 61/SC 9,9599,[5737],"[70510,45077]","['en','fr']",4,"<p>Specifies procedures and conditions for the preparation of test specimens of PVC-U plastics and methods for measuring their properties, which be strongly influenced by the thermal history and the internal stresses. Cancels and replaces the first edition.</p>"

50643,IS,,ISO 11638:2012,Resilient floor coverings — Heterogeneous poly(vinyl chloride) flooring on foam — Specification,Revêtements de sol résilients — Revêtements de sol hétérogènes sur mousse à base de poly(chlorure de vinyle) — Spécification,2012-08-09,1,['97.150'],ISO/TC 219,9599,,[75636],['en'],9,"<p>ISO 11638:2012 specifies the characteristics of heterogeneous poly(vinyl chloride) flooring on foam, based on poly(vinyl chloride), and supplied in roll form or tile. Such products can contain a transparent, non-PVC factory finish.</p><p>To encourage the consumer to make an informed choice, ISO 11638:2012 includes a classification system, based on intensity of use, which shows where these

19569,IS,,ISO 11640:1993,Leather — Tests for colour fastness — Colour fastness to cycles of to-and-fro rubbing,Cuir — Essais de solidité des teintures — Solidité des teintures au frottement en va-et-vient,1993-12-23,1,['59.140.30'],IULTCS,9599,,[54444],"['en','fr']",6,"<p>The principle of the method specified is rubbing one side of the leather to be tested with pieces of reference wool felt under a given pressure for a given number of forward and backward motions, assessing the change in colour of the pieces of felt and of the leather with the grey scales. Any other visible change in or damage to the surface of the leather is also reported.</p>"

54444,IS,,ISO 11640:2012,Leather — Tests for colour fastness — Colour fastness to cycles of to-and-fro rubbing,Cuir — Essais de solidité des coloris — Solidité des coloris au frottement en va-et-vient,2012-11-13,2,['59.140.30'],IULTCS,9599,[19569],[73372],"['en','fr']",6,<p>ISO 11640:2012 specifies a method for determining the behaviour of the surface of a leather on rubbing with a wool felt. It is applicable to leathers of all kinds.</p>

19570,IS,,ISO 11641:1993,Leather — Tests for colour fastness — Colour fastness to perspiration,Cuir — Essais de solidité des teintures — Solidité des teintures à la sueur,1993-12-23,1,['59.140.30'],IULTCS,9599,,[54445],"['en','fr']",5,"<p>The principle of the method specified is soaking a leather specimen and also a piece of adjacent fabric, laid against each side to be tested, in artificial perspiration solution, leaving the composite specimen under pressure for a specified time in a suitable apparatus, drying the leather specimen and adjacent fabric, and assessing the change in colour of the specimen and the staining of the adjacent fabric with the grey scales. Leathers with a finish may b

54445,IS,,ISO 11641:2012,Leather — Tests for colour fastness — Colour fastness to perspiration,Cuir — Essais de solidité des coloris — Solidité des coloris à la sueur,2012-11-14,2,['59.140.30'],IULTCS,9599,[19570],[89401],"['en','fr']",7,"<p>ISO 11641:2012 specifies a method for determining the colour fastness to perspiration of leather of all kinds at all stages of processing. It applies particularly to gloving, clothing and lining leathers, as well as leather for the uppers of unlined shoes. </p><p>The method uses an artificial perspiration solution to simulate the action of human perspiration. Since perspiration varies widely from one individual to the next, it is not possible to design a

19571,IS,,ISO 11642:1993,Leather — Tests for colour fastness — Colour fastness to water,Cuir — Essais de solidité des teintures — Solidité des teintures à l'eau,1993-12-23,1,['59.140.30'],IULTCS,9599,,[54446],"['en','fr']",5,"<p>The principle of the method specified is soaking a leather specimen and also a piece of adjacent fabric, laid against each side to be tested, in demineralized water, leaving the composite specimen under pressure for a specified time in a suitable apparatus, drying the leather specimen and adjacent fabric, and assessing the change in colour of the specimen and the staining of the adjacent fabric with the grey scales. Leathers with a finish may be tested intact or with

54446,IS,,ISO 11642:2012,Leather — Tests for colour fastness — Colour fastness to water,Cuir — Essais de solidité des coloris — Solidité des coloris à l'eau,2012-11-14,2,['59.140.30'],IULTCS,9599,[19571],[89402],"['en','fr']",5,<p>ISO 11642:2012 specifies a method for determining the colour fastness to water of leather of all kinds at all stages of processing.</p>

19572,IS,,ISO 11643:1993,Leather — Tests for colour fastness — Colour fastness of small samples to dry-cleaning solutions,Cuir — Essais de solidité des teintures — Solidité des teintures de petits échantillons aux solutions de nettoyage à sec,1993-12-23,1,['59.140.30'],IULTCS,9599,,[43412],"['en','fr']",5,"<p>The principle of the method specified is agitating a composite specimen of the leather and an adjacent fabric together with PTFE rods in a solvent which may contain triolein (and possibly a detergent), then squeezing and drying at ambient temperature, assessing the change in colour of the specimen and staining of the adjacent fabric with the grey scales and, if applicable, noting any ch

19573,IS,,ISO 11644:1993,Leather — Test for adhesion of finish,Cuir — Essai de l'adhésion du finissage,1993-12-23,1,['59.140.30'],IULTCS,9599,,[43413],"['en','fr']",8,"<p>The principle of the method specified is bonding the finished side of part of a strip of leather to an adherend-plate by means of heat-reactivated adhesive film, applying force to the free end of the strip to peel the leather from the finish over a given distance, the finish layer remaining on the adherend-plate together with the film of adhesive. The force required is measured and reported as the adhesion of the finish to the leather. The method is valid for all finished leathers with a smooth surface which can be bonded t

43413,IS,,ISO 11644:2009,Leather — Test for adhesion of finish,Cuir — Essai d'adhérence du finissage,2009-05-13,2,['59.140.30'],IULTCS,9599,[19573],[81924],"['en','fr']",11,<p>ISO 11644:2009 specifies a method for measuring the adhesion of the finish to leather or the adhesion between two adjacent layers of the finish.</p><p>The method is valid for all finished leathers with a smooth surface that can be bonded to an adherent-plate without the adhesive penetrating into the finish. Preliminary experiments might be necessary to determine whether these conditions are met.</p><p>This test method is valid for finished leathers with a finish-coat thickness of at least 15 µm.</p>

19574,IS,,ISO 11645:1993,Leather — Heat stability of industrial-glove leather,Cuir — Stabilité à la chaleur du cuir pour gants industriels,1993-12-23,1,['59.140.30'],IULTCS,9599,,[31293],['en'],2,"<p>Specifies a method for assessing the changes in dimensions, shape and flexibility of leather upon application of heat, where such leather is intended for the manufacture of industrial gloves. The principle of the method is heating a test specimen in an oven and assessing any shrinkage, as well as any change in shape or flexibility. The method is applicable to both finished and unfinished leathers and can also be used for other items of protective clothing.</p>"

19575,IS,,ISO 11646:1993,Leather — Measurement of area,Cuir — Mesurerage de l'air,1993-12-23,1,['59.140.30'],IULTCS,9599,,[59153],"['en','fr']",4,<p>The principle of the method specified is measuring the area of the conditioned leather with a mechanical pin-wheel machine. Is intended only for the measurement of dressed and other dry flexible leather.</p>

2660,IS,,ISO 11660-1:1999,"Cranes — Access, guards and restraints — Part 1: General","Appareils de levage à charge suspendue — Moyens d'accès, dispositifs de protection et de retenue — Partie 1: Généralités",1999-05-13,1,['53.020.20'],ISO/TC 96/SC 7,9599,,[41280],"['en','fr']",9,

19587,IS,,ISO 11660-2:1994,"Cranes — Access, guards and restraints — Part 2: Mobile cranes","Appareils de levage à charge suspendue — Moyens d'accès, dispositifs de protection et de retenue — Partie 2: Grues mobiles",1994-07-28,1,['53.020.20'],ISO/TC 96/SC 6,9599,,[62768],"['en','fr']",13,"<p>Specifies criteria for steps, stairways, ladders, walkways, platforms, handrails, handholds, guardrails and entrance openings which permit access to and from operator, inspection or maintenance platforms on mobile cranes as defined in ISO 4306-2 and parked in accordance with the manufacturer's instruction. Also presents requirements for guards and restraints as related to moving parts.</p>"

2658,IS,,ISO 11660-3:1999,"Cranes — Access, guards and restraints — Part 3: Tower cranes","Appareils de levage à charge suspendue — Moyens d'accès, dispositifs de protection et de retenue — Partie 3: Grues à tour",1999-05-13,1,['53.020.20'],ISO/TC 96/SC 7,9599,,[41282],"['en','fr']",8,

19588,IS,,ISO 11661:1998,Mobile cranes — Presentation of rated capacity charts,Grues mobiles — Présentation des tableaux de charges,1998-08-20,1,['53.020.20'],ISO/TC 96/SC 6,9599,,[75611],"['en','fr']",10,

50660,IS,,ISO 11663:2009,Quality of dialysis fluid for haemodialysis and related therapies,Qualité des fluides de dialyse pour hémodialyse et thérapies apparentées,2009-04-15,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[61860],"['en','ru']",15,"<p>ISO 11663:2009 specifies minimum requirements for dialysis fluids used for haemodialysis and haemodiafiltration, including substitution fluid for haemodiafiltration and haemofiltration.</p><p>ISO 11663:2009 does not address the requirements for the water and concentrates used to prepare dialysis fluid or the equipment used in its preparation.</p>"

61860,IS,,ISO 11663:2014,Quality of dialysis fluid for haemodialysis and related therapies,Qualité des fluides de dialyse pour hémodialyse et thérapies apparentées,2014-03-17,2,['11.040.40'],ISO/TC 150/SC 2,9599,[50660],[67614],"['en','fr']",17,"<p>ISO 11663:2014 specifies minimum quality requirements for dialysis fluids used in haemodialysis and related therapies.</p><p>ISO 11663:2014 includes dialysis fluids used for haemodialysis and haemodiafiltration, including substitution fluid for haemodiafiltration and haemofiltration.</p>"

52495,IS,,ISO 11664-1:2007,Colorimetry — Part 1: CIE standard colorimetric observers,Colorimétrie — Partie 1: Observateurs CIE de référence pour la colorimétrie,2007-10-15,1,['17.180.20'],CIE,9599,"[37408,52494]",[74164],"['en','fr']",29,<p>ISO 11664-1:2007 comprises ISO 10527:2007 and ISO 10527:2007/Cor.1:2008. Its technical content is identical to that of ISO 10527:2007. ISO 10527:2007/Cor.1:2008 changes the reference number of the standard from 10527 to 11664-1.</p><p>ISO 11664-1:2007 specifies colour-matching functions for use in colorimetry. Two sets of colour-matching functions are specified: colour-matching functions for the CIE 1931 standard colorimetric observer and colour-matching

52496,IS,,ISO 11664-2:2007,Colorimetry — Part 2: CIE standard illuminants,Colorimétrie — Partie 2: Illuminants CIE normalisés,2007-10-15,1,['17.180.20'],CIE,9599,"[52474,41640]",[77215],"['en','fr']",14,<p>ISO 11664-2:2007 comprises ISO 10526:2007 and ISO 10526:2007/Cor.1:2008. Its technical content is identical to that of ISO 10526:2007. ISO 10526:2007/Cor.1:2008 changes the reference number of the standard from 10526 to 11664-2.</p><p>ISO 11664-2:2007 specifies two illuminants for use in colorimetry. The illuminants are the CIE standard illuminant A and the CIE standard illuminant D65.</p>

60331,IS,,ISO 11664-3:2012,Colorimetry — Part 3: CIE tristimulus values,Colorimétrie — Partie 3: Composantes trichromatiques CIE,2012-04-16,1,['17.180.20'],CIE,9599,,[74165],"['en','fr']",10,<p>ISO 11664-3:2012 specifies methods of calculating the tristimulus values of colour stimuli for which the spectral distributions are provided. These colour stimuli may be produced by self-luminous light sources or by reflecting or transmitting objects.</p>

52497,IS,,ISO 11664-4:2008,Colorimetry — Part 4: CIE 1976 L*a*b* Colour space,Colorimétrie — Partie 4: Espace chromatique L*a*b* CIE 1976,2008-11-07,1,['17.180.20'],CIE,9599,[50677],[74166],"['en','fr']",8,"<p>ISO 11664-4:2008 specifies the method of calculating the coordinates of the CIE 1976 L*a*b* colour space including correlates of lightness, chroma and hue. It includes two methods for calculating Euclidean distances in this space to represent the perceived magnitude of colour differences.</p><p>ISO 11664-4:2008 is applicable to tristimulus values calculated using colour-matching functions of the CIE 1931 standard colorimetric system or the CIE 1964 standard colorimetric system. ISO 116

54079,IS,,ISO 11664-5:2009,"Colorimetry — Part 5: CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram","Colorimétrie — Partie 5: Espace chromatique L*u*v* et diagramme de chromaticité uniforme u', v' CIE 1976",2009-11-20,1,['17.180.20'],CIE,9599,,[69034],"['en','fr']",8,"<p>ISO 11664-5:2009 specifies the method of calculating the coordinates of the CIE 1976 <i>L</i>*<i>u</i>*<i>v</i>* colour space including correlates of lightness, chroma, saturation and hue. It includes two methods for calculating Euclidean distances in this space to represent the relative perceived magnitude of colour differences. It also specifies the method of calculating the coordinates of the <i>

52187,IS,,ISO 11665-1:2012,Measurement of radioactivity in the environment — Air: radon-222 — Part 1: Origins of radon and its short-lived decay products and associated measurement methods,"Mesurage de la radioactivité dans l'environnement — Air: radon 222 — Partie 1: Origine du radon et de ses descendants à vie courte, et méthodes de mesure associées",2012-07-10,1,"['17.240','13.040.01']",ISO/TC 85/SC 2,9599,,[76006],"['en','fr']",30,<p>ISO 11665-1:2012 outlines guidance for measuring radon-222 activity concentration and the potential alpha energy concentration of its short-lived decay products in the air. </p><p>The measurement methods fall into three categories:</p><ol><li>spot measuremen

52188,IS,,ISO 11665-2:2012,Measurement of radioactivity in the environment — Air: radon-222 — Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products,Mesurage de la radioactivité dans l'environnement — Air: radon 222 — Partie 2: Méthode de mesure intégrée pour la détermination de l'énergie alpha potentielle volumique moyenne de ses descendants à vie courte,2012-07-13,1,"['17.240','13.040.01']",ISO/TC 85/SC 2,9599,,[76007],"['en','fr']",13,<p>ISO 11665-2:2012 describes integrated measurement methods for short-lived radon-222 decay products. It gives indications for measuring the average potential alpha energy concent

52189,IS,,ISO 11665-3:2012,Measurement of radioactivity in the environment — Air: radon-222 — Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products,Mesurage de la radioactivité dans l'environnement — Air: radon 222 — Partie 3: Méthode de mesure ponctuelle de l'énergie alpha potentielle volumique de ses descendants à vie courte,2012-07-13,1,"['17.240','13.040.01']",ISO/TC 85/SC 2,9599,,[76008],"['en','fr']",19,"<p>ISO 11665-3:2012 describes spot measurement methods for determining the activity concentration of short-lived radon-222 decay products in the air and for calculating the potential alpha energy concentration.</p><p>ISO 11665-3:2

52190,IS,,ISO 11665-4:2012,Measurement of radioactivity in the environment — Air: radon-222 — Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis,Mesurage de la radioactivité dans l'environnement — Air: radon 222 — Partie 4: Méthode de mesure intégrée pour la détermination de l'activité volumique moyenne du radon avec un prélèvement passif et une analyse en différé,2012-07-13,1,"['17.240','13.040.01']",ISO/TC 85/SC 2,9599,,[76009],"['en','fr']",29,"<p>ISO 11665-4:2012 describes radon-222 integrated measurement techniques with passive sampling. It gives indications for determining the average activity concentration o

76009,IS,,ISO 11665-4:2020,Measurement of radioactivity in the environment — Air: radon-222 — Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis,Mesurage de la radioactivité dans l'environnement — Air: radon 222 — Partie 4: Méthode de mesure intégrée pour la détermination de l'activité volumique moyenne du radon avec un prélèvement passif et une analyse en différé,2020-01-06,2,"['17.240','13.040.01']",ISO/TC 85/SC 2,9599,[52190],[82061],"['en','fr']",31,"<p>This document describes radon-222 integrated measurement techniques with passive sampling. It gives indications for determining the average activity concentrati

52191,IS,,ISO 11665-5:2012,Measurement of radioactivity in the environment — Air: radon-222 — Part 5: Continuous measurement method of the activity concentration,Mesurage de la radioactivité dans l'environnement — Air: radon 222 — Partie 5: Méthode de mesure en continu de l'activité volumique,2012-07-13,1,"['17.240','13.040.01']",ISO/TC 85/SC 2,9599,,[76010],"['en','fr']",13,"<p>ISO 11665-5:2012 describes continuous measurement methods for radon-222. It gives indications for continuous measuring of the temporal variations of radon activity concentration in open or confined atmospheres.</p><p>ISO 11665-5:2012 is intended for assessing temporal changes in radon activity concentration in the en

52192,IS,,ISO 11665-6:2012,Measurement of radioactivity in the environment — Air: radon-222 — Part 6: Spot measurement method of the activity concentration,Mesurage de la radioactivité dans l'environnement — Air: radon 222 — Partie 6: Méthode de mesure ponctuelle de l'activité volumique,2012-07-13,1,"['17.240','13.040.01']",ISO/TC 85/SC 2,9599,,[76011],"['en','fr']",13,"<p>ISO 11665-6:2012 describes radon-222 spot measurement methods. It gives indications for carrying out spot measurements, at the scale of a few minutes at a given place, of the radon activity concentration in open and confined atmospheres.</p>"

52194,IS,,ISO 11665-8:2012,Measurement of radioactivity in the environment — Air: radon-222 — Part 8: Methodologies for initial and additional investigations in buildings,Mesurage de la radioactivité dans l'environnement — Air: radon 222 — Partie 8: Méthodologies appliquées aux investigations initiales et complémentaires dans les bâtiments,2012-10-22,1,"['17.240','13.040.01']",ISO/TC 85/SC 2,9599,,[76012],"['en','fr']",20,"<p>ISO 11665-8:2012 specifies requirements for the determination of the activity concentration of radon in all types of buildings. The buildings can be single family houses, public buildings, industrial buildings, underground buildings, etc. </p><p>ISO 11665-8:2012 describ

56653,IS,,ISO 11665-9:2016,Measurement of radioactivity in the environment — Air: Radon-222 — Part 9: Test methods for exhalation rate of building materials,Mesurage de la radioactivité dans l'environnement — Air: Radon 222 — Partie 9: Méthode de détermination du flux d'exhalation des matériaux de construction,2016-02-03,1,"['17.240','13.040.01']",ISO/TC 85/SC 2,9599,,[76013],"['en','fr']",38,<p>ISO 11665-9:2016 specifies a method for the determination of the free radon exhalation rate of a batch of mineral based building materials. The standard only refers to 222Rn exhalation determination using two test methods: Liquid Scintillation Counting (LSC) and gamma ray spectrometry (Annex A and An

50685,IS,,ISO 11666:2010,Non-destructive testing of welds — Ultrasonic testing — Acceptance levels,Contrôle non destructif des assemblages soudés — Contrôle par ultrasons — Niveaux d'acceptation,2010-12-03,1,['25.160.40'],ISO/TC 44/SC 5,9599,,[69610],"['en','fr']",17,"<p>ISO 11666:2010 specifies ultrasonic acceptance levels 2 and 3 for full penetration welded joints in ferritic steels, which correspond to ISO 5817 quality levels B and C. An acceptance level corresponding to ISO 5817 quality level D is not included in ISO 11666:2010 as ultrasonic testing is generally not requested for this weld quality.</p><p>These acceptance levels are applicable to testing carried out in accordance with ISO

5742,IS,,ISO 1167:1973,Plastics pipes for the transport of fluids — Determination of the resistance to internal pressure,Tubes en matières plastiques pour le transport des fluides — Détermination de la résistance à la pression intérieure,1973-12-01,1,['23.040.20'],ISO/TC 138,9599,,[5743],"['en','fr']",4,

5743,IS,,ISO 1167:1996,Thermoplastics pipes for the conveyance of fluids — Resistance to internal pressure — Test method,Tubes en matières thermoplastiques pour le transport des fluides — Résistance à la pression interne — Méthode d'essai,1996-10-31,2,['23.040.20'],ISO/TC 138/SC 5,9599,[5742],"[33982,33981]","['en','fr']",9,<p>Contains a method for determination of the resistance of thermoplastic pipes to constant internal water pressure at constant temperature.</p>

28712,IS,Cor,ISO 1167:1996/Cor 1:1997,Thermoplastics pipes for the conveyance of fluids — Resistance to internal pressure — Test method — Technical Corrigendum 1,Tubes en matières thermoplastiques pour le transport des fluides — Résistance à la pression interne — Méthode d'essai — Rectificatif technique 1,1997-02-27,2,['23.040.20'],ISO/TC 138/SC 5,9599,,"[33982,33981]","['en','fr']",1,<p>Replaces the test temperature of 100 °C by 110 °C in tables A.4 and A.5.</p>

19594,IS,,ISO 11670:1999,Lasers and laser-related equipment — Test methods for laser beam parameters — Beam positional stability,Lasers et équipements associés aux lasers — Méthodes d'essai des paramètres des faisceaux laser — Stabilité de visée du faisceau,1999-08-19,1,['31.260'],ISO/TC 172/SC 9,9599,,[31690],"['en','fr']",12,

26148,IS,,ISO 11674:2000,Ships and marine technology — Heading control systems,Navires et technologie maritime — Systèmes de pilotage,2000-07-27,1,['47.020.70'],ISO/TC 8/SC 6,9599,[19598],[44047],['en'],13,

36139,IS,Cor,ISO 11674:2000/Cor 1:2001,Ships and marine technology — Heading control systems — Technical Corrigendum 1,Navires et technologie maritime — Systèmes de pilotage — Rectificatif technique 1,2001-11-08,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[44047],['en'],2,

44047,IS,,ISO 11674:2006,Ships and marine technology — Heading control systems,Navires et technologie maritime — Systèmes de contrôle du cap,2006-08-29,2,['47.020.70'],ISO/TC 8/SC 6,9599,"[36139,26148]",[68748],"['en','fr','ru']",13,"<p>ISO 11674:2006 specifies the structure, performance, inspection and testing of heading control systems to be installed on board ships.</p>"

19599,IS,,ISO 11675:1994,Textile machinery — Flatbed knitting machines — Vocabulary,Matériel pour l'industrie textile — Machines à tricoter à fonture — Vocabulaire,1994-09-01,1,"['59.120.40','01.040.59']",ISO/TC 72/SC 3,9599,,[36239],"['en','fr']",16,"<p>Defines the terms related to the technology of flatbed knitting machines. The figures illustrate the working principles of the various combinations. They do not represent the only, or even the most common, arrangement.</p>"

19600,IS,,ISO 11676:1994,Textile machinery and accessories — Chain links for warp knitting machines — Vocabulary and symbols,Matériel pour l'industrie textile — Maillons pour machines 'chaîne' — Vocabulaire et symboles,1994-09-01,1,"['59.120.40','01.040.59']",ISO/TC 72/SC 3,9599,,[52739],"['en','fr']",7,<p>Defines the terms and symbols related to chain links for warp knitting maschines.</p>

22847,IS,,ISO 11680-1:2000,Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 1: Units fitted with an integral combustion engine,Matériel forestier — Exigences de sécurité et essais pour les perches élagueuses à moteur — Partie 1: Machines équipées d'un moteur à combustion interne intégré,2000-08-10,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[51131],"['en','fr']",30,

51131,IS,,ISO 11680-1:2011,Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 1: Machines fitted with an integral combustion engine,Matériel forestier — Exigences de sécurité et essais pour les perches élagueuses à moteur — Partie 1: Machines équipées d'un moteur à combustion interne intégré,2011-11-23,2,['65.060.80'],ISO/TC 23/SC 17,9599,[22847],[74726],"['en','fr']",18,"<p>ISO 11680-1:2011 gives safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners having an integral combustion engine as their power unit and using a drive shaft to transmit power to a cutting

74726,IS,,ISO 11680-1:2021,Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 1: Machines fitted with an integral combustion engine,Matériel forestier — Exigences de sécurité et essais pour les perches élagueuses à moteur — Partie 1: Machines équipées d'un moteur à combustion interne intégré,2021-10-22,3,['65.060.80'],ISO/TC 23/SC 17,9599,[51131],[86011],"['en','fr']",28,"<p>This document specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners (hereafter named “machine”), including extendable and telescopic machines, having an integral combustion engine

22848,IS,,ISO 11680-2:2000,Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 2: Units for use with a back-pack power source,Matériel forestier — Exigences de sécurité et essais pour les perches élagueuses à moteur — Partie 2: Machines pour utilisation avec une source motrice portée à dos,2000-08-10,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[51132],"['en','fr']",17,

51132,IS,,ISO 11680-2:2011,Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 2: Machines for use with back-pack power source,Matériel forestier — Exigences de sécurité et essais pour les perches élagueuses à moteur — Partie 2: Machines pour utilisation avec source motrice portée à dos,2011-11-23,2,['65.060.80'],ISO/TC 23/SC 17,9599,"[22848,25415]",[74727],"['en','fr']",5,"<p>ISO 11680-2:2011 gives safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners with a back-pack power unit and using a drive shaft to transmit power to a cutting attachment consisting of a s

74727,IS,,ISO 11680-2:2021,Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 2: Machines for use with backpack power source,Matériel forestier — Exigences de sécurité et essais pour les perches élagueuses à moteur — Partie 2: Machines pour utilisation avec source motrice portée à dos,2021-10-22,3,['65.060.80'],ISO/TC 23/SC 17,9599,[51132],[86011],"['en','fr']",5,"<p>This document specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners with a backpack power unit (hereafter referred to as “machine”). These machines use a power transmission shaft to trans

19606,IS,,ISO 11681-1:1996,Machinery for forestry — Portable chain-saws — Safety requirements and testing — Part 1: Chain-saws for normal forest work,Matériel forestier — Scies à chaîne portatives — Exigences de sécurité et essais — Partie 1: Scies à chaîne pour travaux forestiers normaux,1996-06-13,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[35165],"['en','fr']",13,"<p>Gives safety requirements of portable combustion-engines, hand-held chain-saws for normal forest work. Describes methods for elimination or reduction of hazards arising from their use.</p>"

35165,IS,,ISO 11681-1:2004,Machinery for forestry — Portable chain-saw safety requirements and testing — Part 1: Chain-saws for forest service,Matériel forestier — Exigences de sécurité et essais des scies à chaîne portatives — Partie 1: Scies à chaîne pour travaux forestiers,2004-02-09,2,['65.060.80'],ISO/TC 23/SC 17,9599,[19606],[54360],"['en','fr']",18,"<p>ISO 11681-1:2004 deals with the significant hazards and specifies safety requirements and their verification for design and construction of portable combustion-engine, hand-held chain-saws, designed only for use by one operator and intended for forest work. It describes methods for the elimination or reduction of hazards arising from th

41946,IS,Amd,ISO 11681-1:2004/Amd 1:2007,Machinery for forestry — Portable chain-saw safety requirements and testing — Part 1: Chain-saws for forest service — Amendment 1: Balance,Matériel forestier — Exigences de sécurité et essais des scies à chaîne portatives — Partie 1: Scies à chaîne pour travaux forestiers — Amendement 1: Équilibre,2007-03-26,2,['65.060.80'],ISO/TC 23/SC 17,9599,,[54360],"['en','fr']",2,

54360,IS,,ISO 11681-1:2011,Machinery for forestry — Portable chain-saw safety requirements and testing — Part 1: Chain-saws for forest service,Matériel forestier — Exigences de sécurité et essais des scies à chaîne portatives — Partie 1: Scies à chaîne pour travaux forestiers,2011-11-25,3,['65.060.80'],ISO/TC 23/SC 17,9599,"[35165,41946]",[74724],"['en','fr']",22,"<p>ISO 11681-1:2011 gives safety requirements and measures for their verification for the design and construction of portable, combustion-engine, hand-held chain-saws, intended to be used for forest work by only one operator, by persons with the right hand on the rear handle and left hand on the front handle having read and underst

23782,IS,,ISO 11681-2:1998,Machinery for forestry — Portable chain-saws — Safety requirements and testing — Part 2: Chain-saws for tree service,Matériel forestier — Scies à chaîne portatives — Exigences de sécurité et essais — Partie 2: Scies à chaîne pour l'élagage des arbres,1998-04-02,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[39358],"['en','fr']",20,

35164,IS,Amd,ISO 11681-2:1998/Amd 1:2003,Machinery for forestry — Portable chain-saws — Safety requirements and testing — Part 2: Chain-saws for tree service — Amendment 1,Matériel forestier — Scies à chaîne portatives — Exigences de sécurité et essais — Partie 2: Scies à chaîne pour l'élagage des arbres — Amendement 1,2003-11-13,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[39358],"['en','fr']",12,

39358,IS,,ISO 11681-2:2006,Machinery for forestry — Portable chain-saw safety requirements and testing — Part 2: Chain-saws for tree service,Matériel forestier — Exigences de sécurité et essais des scies à chaîne portatives — Partie 2: Scies à chaîne pour l'élagage des arbres,2006-07-04,2,['65.060.80'],ISO/TC 23/SC 17,9599,"[23782,35164]",[54361],"['en','fr']",24,"<p>ISO 11681-2:2006 specifies safety requirements and their verification for the design and construction of portable combustion-engine, hand-held chain-saws for tree service, having a maximum mass, without guide bar or saw chain and with tanks empty, equal to 4,3 kg, and designed for use by a trained operator for pruning and disman

54361,IS,,ISO 11681-2:2011,Machinery for forestry — Portable chain-saw safety requirements and testing — Part 2: Chain-saws for tree service,Matériel forestier — Exigences de sécurité et essais des scies à chaîne portatives — Partie 2: Scies à chaîne pour l'élagage des arbres,2011-11-25,3,['65.060.80'],ISO/TC 23/SC 17,9599,[39358],[74725],"['en','fr']",26,"<p>ISO 11681-2:2011 gives safety requirements and measures for their verification for the design and construction for tree service of portable, combustion-engine, hand-held chain-saws having a maximum mass, without guide bar or saw chain and with tanks empty, of 4,3 kg, intended to be used, with the right hand on the rear handle and left h

68762,IS,Amd,ISO 11681-2:2011/Amd 1:2017,Machinery for forestry — Portable chain-saw safety requirements and testing — Part 2: Chain-saws for tree service — Amendment 1,Matériel forestier — Exigences de sécurité et essais des scies à chaîne portatives — Partie 2: Scies à chaîne pour l'élagage des arbres — Amendement 1,2017-04-21,3,['65.060.80'],ISO/TC 23/SC 17,9599,,[74725],"['en','fr']",2,

19607,IS,,ISO 11682:1993,Brush-cutters and grass-trimmers — Technical data,Débroussailleuses et coupe-herbe — Données techniques,1993-11-25,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[43265],"['en','fr']",3,"<p>Provides the format for specification of the technical data for portable, hand-held brush-cutters and grass-trimmers with combustion engines, in accordance with the vocabulary in ISO 7112.</p>"

19608,IS,,ISO 11683:1993,Packaging — Tactile danger warnings — Requirements,Emballages — Indications tactiles de danger — Exigences,1993-05-06,1,['55.020'],ISO/TC 122,9599,,[26907],"['en','fr']",3,

19609,IS,,ISO 11684:1995,"Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Safety signs and hazard pictorials — General principles","Tracteurs et matériels agricoles et forestiers, matériels à moteur pour jardins et pelouses — Signaux de sécurité et de danger — Principes généraux",1995-01-19,1,"['01.080.20','65.060.01']",ISO/TC 23/SC 14,9599,,"[74565,37731]","['en','fr']",52,"<p>Establishes general principles for the design and application of safety signs and hazard pictorials permanently affixed to tractors, machinery for agriculture and forestry, and powered lawn and garden equipment as defined in ISO 3339-0 and ISO 5395. Outlines safety sign objectives

19611,IS,,ISO 11687-1:1995,Plain bearings — Pedestal plain bearings — Part 1: Pillow blocks,Paliers lisses — Paliers lisses à chaise sur le sol — Partie 1: Supports de paliers,1995-01-26,1,['21.100.10'],ISO/TC 123/SC 3,9599,,"[76752,75747]","['en','fr']",10,"<p>Specifies design characteristics (classification, dimensions, materials, designation) for pillow blocks for the size ranges 9 to 28 and 35 to 71, as well as design characteristics for shafts. Is applicable to pillow blocks used mainly in electrical and turbo engineering industries.</p>"

19612,IS,,ISO 11687-2:1995,Plain bearings — Pedestal plain bearings — Part 2: Side flange bearings,Paliers lisses — Paliers lisses à chaise sur le sol — Partie 2: Paliers à bride latérale,1995-01-26,1,['21.100.10'],ISO/TC 123/SC 3,9599,,"[75748,76753]","['en','fr']",7,"<p>Specifies design characteristics (classification, dimensions, materials, designation) for side flange bearings for the size range 9 to 28, as well as design characteristics for shafts. Is applicable to side flange bearings used mainly in electrical and turbo engineering industries.</p>"

19613,IS,,ISO 11687-3:1995,Plain bearings — Pedestal plain bearings — Part 3: Centre flange bearings,Paliers lisses — Paliers lisses à chaise sur le sol — Partie 3: Paliers à bride centrale,1995-01-26,1,['21.100.10'],ISO/TC 123/SC 3,9599,,"[76754,75749]","['en','fr']",8,"<p>Specifies design characteristics (classification, dimensions, materials, designation) for centre flange bearings for the size range 9 to 28, as well as design characteristics for shafts. Is applicable to centre flange bearings used mainly in electrical and turbo engineering industries.</p>"

5745,IS,,ISO 1169:1975,Zinc alloys — Determination of aluminium content — Volumetric method,Alliages de zinc — Dosage de l'aluminium — Méthode titrimétrique,1975-06-01,1,['77.120.60'],ISO/TC 18,9599,,[35631],"['en','fr']",2,"<p>The method is applicable to certain zinc alloys (see ISO 301) and to die castings made from these alloys. Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report.</p>"

19617,IS,,ISO 11690-1:1996,Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 1: Noise control strategies,Acoustique — Pratique recommandée pour la conception de lieux de travail à bruit réduit contenant des machines — Partie 1: Stratégies de réduction du bruit,1996-10-17,1,['13.140'],ISO/TC 43/SC 1,9599,,[77029],"['en','fr']",23,

19618,IS,,ISO 11690-2:1996,Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 2: Noise control measures,Acoustique — Pratique recommandée pour la conception de lieux de travail à bruit réduit contenant des machines — Partie 2: Moyens de réduction du bruit,1996-10-17,1,['13.140'],ISO/TC 43/SC 1,9599,,[77030],"['en','fr']",26,

19620,IS,,ISO 11691:1995,Acoustics — Measurement of insertion loss of ducted silencers without flow — Laboratory survey method,Acoustique — Détermination de la perte d'insertion de silencieux en conduit sans écoulement — Méthode de mesurage en laboratoire,1995-08-03,1,['91.120.20'],ISO/TC 43/SC 1,9599,,[69859],"['en','fr']",6,"<p>Specifies a laboratory substitution method to determine the insertion loss of ducted circular and rectangular silencers without flow, as well as other duct elements for use in ventilating and air-conditioning systems.</p>"

19625,IS,,ISO 11699-1:1998,Non-destructive testing — Industrial radiographic films — Part 1: Classification of film systems for industrial radiography,Essais non destructifs — Films utilisés en radiographie industrielle — Partie 1: Classification des systèmes relatifs aux films pour la radiographie industrielle,1998-06-18,1,['37.040.25'],ISO/TC 135/SC 5,9599,,[45374],"['en','fr']",5,

2287,IS,,ISO 11699-2:1998,Non-destructive testing — Industrial radiographic films — Part 2: Control of film processing by means of reference values,Essais non destructifs — Films utilisés en radiographie industrielle — Partie 2: Contrôle du traitement des films au moyen de valeurs de référence,1998-06-18,1,['37.040.25'],ISO/TC 135/SC 5,9599,,[71852],"['en','fr']",9,

5746,IS,,ISO 1170:1977,Coal and coke — Calculation of analyses to different bases,Charbon et coke — Calculs pour les analyses par rapport à différentes bases,1977-03-01,1,"['73.040','75.160.10']",ISO/TC 27/SC 5,9599,,[41148],"['en','fr']",4,<p>Gives formulae which allow analytical data relating to coal and coke to be expressed on the various different bases in common use. Consideration is given to corrections that may be applied to certain determind values for coal prior ti their calculation to other bases. In a table formulae for calculation of results to different bases are given.</p>

41148,IS,,ISO 1170:2008,Coal and coke — Calculation of analyses to different bases,Charbon et coke — Calculs pour les analyses par rapport à différentes bases,2008-10-06,2,"['73.040','75.160.10']",ISO/TC 27/SC 5,9599,[5746],[62609],['en'],7,<p>ISO 1170:2008 gives equations that allow analytical data relating to coal and coke to be expressed on the various different bases in common use. Consideration is given to corrections that can be applied to certain determined values for coal prior to their calculation to other bases.</p>

62609,IS,,ISO 1170:2013,Coal and coke — Calculation of analyses to different bases,Charbon et coke — Calculs pour les analyses par rapport à différentes bases,2013-07-18,3,"['73.040','75.160.10']",ISO/TC 27/SC 5,9599,[41148],[79736],['en'],7,<p>ISO 1170:2013 gives equations that allow analytical data relating to coal and coke to be expressed on the various different bases in common use. Consideration is given to corrections that can be applied to certain determined values for coal prior to their calculation to other bases.</p>

50698,IS,,ISO 11702:2009,Animal and vegetable fats and oils — Enzymatic determination of total sterols content,Corps gras d'origines animale et végétale — Détermination enzymatique de la teneur en stérols totaux,2009-12-03,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[70099],"['en','fr','ru']",7,"<p>ISO 11702:2009 specifies a method for the quantitative determination of the total sterols content by means of an enzymatic staining test. The method is applicable to free and esterified sterols in animal and vegetable fats and oils, fatty foods and related products. The determination is applicable to sample quantities of 1 g to 2 g of fat.</p><p>The method is not applicable to dark coloured fats and oil

50700,IS,,ISO 11704:2010,Water quality — Measurement of gross alpha and beta activity concentration in non-saline water — Liquid scintillation counting method,Qualité de l'eau — Mesurage des activités alpha globale et bêta globale des eaux non salines — Méthode de comptage par scintillation liquide,2010-06-24,1,"['17.240','13.060.60']",ISO/TC 147/SC 3,9599,,[71996],"['en','fr']",12,<p>ISO 11704:2010 specifies a method for the determination of gross alpha and gross beta activity in waters for radionuclides which are not volatile at 80 °C. Radon isotopes and their decay products of short half life are not included in the determination.</p><p>The method is applicable to raw and potable waters w

5748,IS,,ISO 1171:1981,Solid mineral fuels — Determination of ash,Combustibles minéraux solides — Détermination des cendres,1981-10-01,2,['75.160.10'],ISO/TC 27/SC 5,9599,"[5485,4684,3989]",[1626],"['en','fr']",2,

1626,IS,,ISO 1171:1997,Solid mineral fuels — Determination of ash,Combustibles minéraux solides — Détermination des cendres,1997-12-18,3,['75.160.10'],ISO/TC 27/SC 5,9599,[5748],[55944],"['en','fr']",4,

30956,IS,Cor,ISO 1171:1997/Cor 1:1998,Solid mineral fuels — Determination of ash — Technical Corrigendum 1,Combustibles minéraux solides — Détermination des cendres — Rectificatif technique 1,1998-11-12,3,['75.160.10'],ISO/TC 27/SC 5,9599,,[55944],['en'],1,

55944,IS,,ISO 1171:2010,Solid mineral fuels — Determination of ash,Combustibles minéraux solides — Détermination des cendres,2010-06-04,4,['75.160.10'],ISO/TC 27/SC 5,9599,"[30956,1626]",[86977],"['en','ru']",4,<p>ISO 1171:2010 specifies a method for the determination of the ash of all solid mineral fuels.</p>

57295,IS,,ISO 11711-1:2013,Ships and marine technology — Piping and machinery — Ballast water sampling and analysis — Part 1: Discharge sampling port,Navires et technologie maritime — Tuyauterie et machines — Échantillonnage et analyse de l'eau de ballast — Partie 1: Appareillage de prélèvement à l'évacuation,2013-02-18,1,['47.020.99'],ISO/TC 8,9599,,[72334],['en'],7,"<p>ISO 11711-1:2013 provides guidance to shipboard personnel and other concerned parties on the materials, design, and installation of equipment used to take samples of treated ballast water from the ballast water discharge pipe onboard a vessel. The purpose of the sampling system is to enable the taking of a representative sam

50722,IS,,ISO 11712:2009,Anaesthetic and respiratory equipment — Supralaryngeal airways and connectors,Matériel d'anesthésie et de réanimation respiratoire — Canules supralaryngées et raccords,2009-05-15,1,['11.040.10'],ISO/TC 121/SC 2,9599,,[81539],"['en','ru']",28,"<p>ISO 11712:2009 provides the essential requirements for the design of supralaryngeal airways and connectors. These devices are intended to open and seal the supralaryngeal area to provide an unobstructed airway in patients during spontaneous, assisted or controlled ventilation.</p><p>ISO 11712:2009 specifies the dimensions, basic properties and method of size designation of the available types of supralaryngeal airways. Airway