Withdrawn and superseded ISO standards — page 31 of 246

68462,IS,,ISO 12614-19:2017,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 19: Automatic valve,Véhicules routiers — Composants des systèmes d'alimentation en gaz naturel liquéfié (GNL) — Partie 19: Valve automatique,2017-03-03,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[77675],['en'],5,"<p>ISO 12614-19:2017 specifies tests and requirements for the automatic valve, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833. This document is applicable to vehicles using natural gas in accordance with ISO 15403 (all parts) (mono-fuel, bi-fuel or dual-fuel applications). It is not applicable to the following:</p><p>a)

57662,IS,,ISO 12614-2:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 2: Performance and general test methods,Véhicules routiers — Équipements pour véhicules utilisant le gaz naturel liquéfié (GNL) comme combustible — Partie 2: Performances et méthodes d'essai générales,2014-07-01,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[77658],['en'],8,"<p>ISO 12614-2:2014 specifies general requirements and definitions of liquefied natural gas fuel system components, intended for use on the types of motor vehicles as defined in ISO 3833. ISO 12614-2:2014 is also applicable to other LNG-fueled motor vehicles (for example ships) as far as appropriate, until any specific norm would

57663,IS,,ISO 12614-3:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 3: Check valve,Véhicules routiers — Équipements pour véhicules utilisant le gaz naturel liquéfié (GNL) comme combustible — Partie 3: Valve de contrôle,2014-07-01,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[77659],['en'],3,"<p>ISO 12614-3:2014 specifies tests and requirements for the check valve, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833.</p><p>ISO 12614-3:2014 is not applicable to the following:</p><p>a) fuel containers;</p><p>b) stationary gas engines;</p><p>c) container mounting hardware;</p><p>d) electronic fuel

57664,IS,,ISO 12614-4:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 4: Manual valve,Véhicules routiers — Équipements pour véhicules utilisant le gaz naturel liquéfié (GNL) comme combustible — Partie 4: Valve manuelle,2014-07-01,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[77660],['en'],4,"<p>ISO 12614-4:2014 specifies tests and requirements for the manual valve, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833. ISO 12614-4:2014 is not applicable to the following:</p><p>a) fuel containers;</p><p>b) stationary gas engines;</p><p>c) container mounting hardware;</p><p>d) electronic fuel manage

57667,IS,,ISO 12614-5:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 5: Tank pressure gauge,Véhicules routiers — Équipements pour véhicules utilisant le gaz naturel liquéfié (GNL) comme combustible — Partie 5: Manomètre du réservoir,2014-07-01,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[77661],['en'],3,"<p>ISO 12614-5:2014 specifies tests and requirements for the tank pressure gauge, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833.</p><p>ISO 12614-5:2014 is not applicable to the following:</p><p>a) fuel containers;</p><p>b) stationary gas engines;</p><p>c) container mounting hardware;</p><p>

57668,IS,,ISO 12614-6:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 6: Pressure regulator,Véhicules routiers — Équipements pour véhicules utilisant le gaz naturel liquéfié (GNL) comme combustible — Partie 6: Régulateur de pression,2014-07-01,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[77662],['en'],4,"<p>ISO 12614-6:2014 specifies tests and requirements for the pressure regulator, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833. </p><p>ISO 12614-6:2014 is applicable to vehicles using natural gas in accordance with ISO 15403 (mono-fuel, bi-fuel, or dual-fuel applications). It is not applicable to the

57671,IS,,ISO 12614-7:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 7: Pressure relief valve,Véhicules routiers — Équipements pour véhicules utilisant le gaz naturel liquéfié (GNL) comme combustible — Partie 7: Soupape de sécurité à la pression,2014-07-17,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[77663],['en'],4,"<p>ISO 12614-7:2014 specifies tests and requirements for the pressure relief valve (PRV), a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833. ISO 12614-7:2014 is not applicable to the following:</p><p>a) fuel containers;</p><p>b) stationary gas engines;</p><p>c) container mounting h

57673,IS,,ISO 12614-8:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 8: Excess flow valve,Véhicules routiers — Équipements pour véhicules utilisant le gaz naturel liquéfié (GNL) comme combustible — Partie 8: Valve de limitation de débit,2014-07-01,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[77664],['en'],5,"<p>ISO 12614-8:2014 specifies tests and requirements for the excess flow valve, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833. ISO 12614-8:2014 is applicable to vehicles using natural gas in accordance with ISO 15403 (mono-fuel, bi-fuel, or dual-fuel applications). It is not applicable to the fo

57674,IS,,ISO 12614-9:2014,Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 9: Gas-tight housing and ventilation hose,Véhicules routiers — Équipements pour véhicules utilisant le gaz naturel liquéfié (GNL) comme combustible — Partie 9: Compartiment étanche pour gaz et tuyaux de ventilation,2014-07-01,1,['43.060.40'],ISO/TC 22/SC 41,9599,,[77665],['en'],3,"<p>ISO 12614-9:2014 specifies tests and requirements for the gas-tight housing and ventilation hose, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833.</p><p>ISO 12614-9:2014 is applicable to vehicles using natural gas in accordance with ISO 15403 (mono

35360,IS,,ISO 12616:2002,Translation-oriented terminography,Terminographie axée sur la traduction,2002-03-21,1,['01.120'],ISO/TC 37/SC 2,9599,,"[67160,72308]","['en','fr']",27,"<p>This International Standard provides guidelines to enable translators and translation support staff to record,</p><p>maintain and quickly and easily retrieve terminological information in connection with translation work.</p><p>The quality of a translation can be measured partly in terms of linguistic elements, such as style and grammar, and</p><p>partly in terms of the accurate use of the terminology involved. The guidelines in this International Standard provide</p><p>the necessary elements for quality control of

2517,IS,,ISO 12620:1999,Computer applications in terminology — Data categories,Aides informatiques en terminologie — Catégories de données,1999-10-21,1,"['35.240.30','01.020']",ISO/TC 37/SC 3,9599,,"[34770,37243]","['en','fr']",58,

37243,IS,,ISO 12620:2009,Terminology and other language and content resources — Specification of data categories and management of a Data Category Registry for language resources,Terminologie et autres ressources langagières et ressources de contenu — Spécification de catégories de données et gestion d'un registre de catégories de données pour les ressources langagières,2009-12-10,2,"['35.240.30','01.020']",ISO/TC 37/SC 3,9599,[2517],[69550],['en'],40,"<p>ISO 12620:2009 provides guidelines concerning constraints related to the implementation of a Data Category Registry (DCR) applicable to all types of language resources, for example, terminological, lexicographical, corpus-based, machine tr

69550,IS,,ISO 12620:2019,Management of terminology resources — Data category specifications,Gestion des ressources terminologiques — Spécifications des catégories de données,2019-05-20,3,"['35.240.30','01.020']",ISO/TC 37/SC 3,9599,[37243],"[79018,79078]",['en'],13,"<p>This document provides guidelines and requirements governing data category specifications for language resources. It specifies mechanisms for creating, documenting, harmonizing and maintaining data category specifications in a data category repository. It also describes the structure and content of data category specifications. The intended audience of this document is researchers and practitioners in fields of language resour

51601,IS,,ISO 12623:2011,Thermal insulating products for building equipment and industrial installations — Determination of short-term water absorption by partial immersion of preformed pipe insulation,Produits isolants thermiques pour les équipements des bâtiments et les installations industrielles — Détermination de l'absorption d'eau à court terme par immersion partielle des coquilles isolantes préformées,2011-01-06,1,['91.100.60'],ISO/TC 163/SC 1,9599,,[81151],['en'],12,<p>ISO 12623:2011 specifies the equipment and procedures for determining the short-term water absorption of preformed pipe insulation by partial immersion in water. It is applicable to thermal insulating products.</p> 516

51602,IS,,ISO 12624:2011,"Thermal insulating products for building equipment and industrial installations — Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH","Produits isolants thermiques — Détermination des faibles quantités d'ions chlorure, fluorure, silicate et sodium solubles dans l'eau et mesure du pH",2011-01-06,1,['91.100.60'],ISO/TC 163/SC 1,9599,,[81155],['en'],15,"<p>ISO 12624:2011 specifies the equipment and procedures for determining trace quantities of the water soluble chloride, fluoride, silicate and sodium ions in an aqueous extract of the product. It also describes a procedure for the determination of the pH of the aqueous e

38312,IS,,ISO 12625-1:2005,Tissue paper and tissue products — Part 1: General guidance on terms,Papier tissue et produits tissues — Partie 1: Lignes directrices générales relatives aux termes,2005-06-07,1,"['01.040.85','85.080.20']",ISO/TC 6/SC 2,9599,,[53422],"['en','fr','ru']",40,"<p>ISO 12625-1:2005 establishes general principles for the use of terms in the entire working field of tissue paper and tissue products.</p><p>It permits the use of a common terminology in industry and commerce.</p><p>It is expressly stated that the detection of impurities and contraries in tissue paper and tissue products should be applied according to ISO 15755.</p><p>For the determination of moisture content i

53422,IS,,ISO 12625-1:2011,Tissue paper and tissue products — Part 1: General guidance on terms,Papier tissue et produits tissues — Partie 1: Lignes directrices générales relatives aux termes,2011-07-21,2,"['01.040.85','85.080.20']",ISO/TC 6/SC 2,9599,[38312],[72524],"['de','en','fr']",36,<p>ISO 12625-1:2011 establishes general principles for the use of terms in the entire working field of tissue paper and tissue products.</p><p>It permits the use of a common terminology in industry and commerce. </p>

57924,IS,,ISO 12625-11:2012,Tissue paper and tissue products — Part 11: Determination of wet ball burst strength,"Papier tissue et produits tissues — Partie 11: Détermination de la résistance à l'éclatement à l'état humide, méthode à la balle",2012-12-11,1,['85.080.20'],ISO/TC 6/SC 2,9599,,[76349],"['en','fr']",9,<p>ISO 12625-11:2012 specifies a test method for the determination of the resistance to mechanical penetration (ball burst strength procedure) of tissue paper and tissue products after wetting.</p>

45620,IS,,ISO 12625-12:2010,Tissue paper and tissue products — Part 12: Determination of tensile strength of perforated lines — Calculation of perforation efficiency,Papier tissue et produits tissues — Partie 12: Détermination de la résistance à la rupture par traction des lignes de prédécoupe — Calcul de l'efficacité des perforations,2010-01-04,1,['85.080.20'],ISO/TC 6/SC 2,9599,,[83277],"['en','fr']",14,"<p>ISO 12625-12:2010 specifies a test method for the determination of the tensile strength of perforated lines of tissue paper. It uses a tensile-testing apparatus operating with a constant rate of elongation.</p><p>This method is only used for measuring machine-direction tensile strength,

63393,IS,,ISO 12625-15:2015,Tissue paper and tissue products — Part 15: Determination of optical properties — Measurement of brightness and colour with C/2° (indoor daylight) illuminant,Papier tissue et produits tissue — Partie 15: Détermination des propriétés optiques — Mesurage du degré de blancheur et de la couleur avec l'illuminant C/2° (lumière du jour à l'intérieur),2015-02-05,1,['85.080.20'],ISO/TC 6/SC 2,9599,,[83278],"['en','fr']",11,"<p>ISO 12625-15:2015 specifies testing procedures for the instrumental determination of brightness and colour of tissue paper and tissue products viewed in indoor daylight conditions. It also gives specific instructions for the preparation of test piec

63398,IS,,ISO 12625-16:2015,Tissue paper and tissue products — Part 16: Determination of optical properties — Opacity (paper backing) — Diffuse reflectance method,Papier tissue et produits tissue — Partie 16: Détermination des propriétés optiques — Opacité sur fond papier — Méthode par réflexion en lumière diffuse,2015-02-05,1,['85.080.20'],ISO/TC 6/SC 2,9599,,[83279],"['en','fr']",10,"<p>ISO 12625-16:2015 specifies the testing procedures for the instrumental determination of the opacity of tissue paper or tissue products by diffuse reflectance using a paper backing.</p><p>ISO 12625-16:2015 contains specific instructions for the preparation of test pieces of single-ply and multi-ply products

38313,IS,,ISO 12625-3:2005,"Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density","Papier tissue et produits tissues — Partie 3: Détermination de l'épaisseur, de l'épaisseur moyenne d'une feuille en liasse et de la masse volumique moyenne",2005-04-20,1,['85.080.20'],ISO/TC 6/SC 2,9599,,[62536],"['en','fr','ru']",10,"<p>ISO 12625-3:2005 specifies a test method for the determination of thickness and bulking thickness, and the calculation of apparent bulk density, of tissue paper and tissue products under a pressure of 2,0 kPa.</p>"

38314,IS,,ISO 12625-4:2005,"Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at break and tensile energy absorption","Papier tissue et produits tissues — Partie 4: Détermination de la résistance à la rupture par traction, de l'allongement à la rupture par traction et de l'absorption d'énergie à la rupture par traction",2005-04-22,1,['85.080.20'],ISO/TC 6/SC 2,9599,,[66469],"['en','fr','ru']",9,"<p>ISO 12625-4:2005 specifies a test method for the determination of the tensile strength, stretch at break and tensile energy absorption of tissue paper and tissue products. It uses a tensile-testing apparatus operating with a constant rate of elongation.</p><p>It

66469,IS,,ISO 12625-4:2016,"Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption","Papier tissue et produits tissue — Partie 4: Détermination de la résistance à la rupture par traction, de l'allongement à la force maximale et de l'absorption d'énergie à la rupture par traction",2016-12-02,2,['85.080.20'],ISO/TC 6/SC 2,9599,[38314],[80328],"['en','fr','ru']",9,"<p>ISO 12625-4:2016 specifies a test method for the determination of the tensile strength, stretch at maximum force and tensile energy absorption of tissue paper and tissue products. It uses a tensile-testing apparatus operating with a constant rate of elon

38315,IS,,ISO 12625-5:2005,Tissue paper and tissue products — Part 5: Determination of wet tensile strength,Papier tissue et produits tissues — Partie 5: Détermination de la résistance à la rupture par traction à l'état humide,2005-04-20,1,['85.080.20'],ISO/TC 6/SC 2,9599,,[66471],"['en','fr','ru']",12,"<p>ISO 12625-5:2005 specifies a test method for the determination of the wet tensile strength of tissue paper and tissue products after soaking with water, using a tensile-strength-testing apparatus operating with a constant rate of elongation.</p>"

66471,IS,,ISO 12625-5:2016,Tissue paper and tissue products — Part 5: Determination of wet tensile strength,Papier tissue et produits tissue — Partie 5: Détermination de la résistance à la rupture par traction à l'état humide,2016-12-02,2,['85.080.20'],ISO/TC 6/SC 2,9599,[38315],[85331],"['en','fr']",15,"<p>ISO 12625-5:2016 specifies a test method for the determination of the wet tensile strength of tissue paper and tissue products after soaking with water, using a tensile-strength-testing apparatus operating with a constant rate of elongation.</p><p>Currently, two types of tensile-strength-testing apparatus are commercially available, one where the test piece is positioned vertically and, f

38316,IS,,ISO 12625-6:2005,Tissue paper and tissue products — Part 6: Determination of grammage,Papier tissue et produits tissues — Partie 6: Détermination du grammage,2005-01-04,1,['85.080.20'],ISO/TC 6/SC 2,9599,,[66472],"['en','fr','ru']",5,"<p>ISO 12625-6:2005 specifies a test method for the determination of grammage of tissue paper and tissue products. Grammage may be measured by determining the mass of a test piece or test pieces of tissue paper or tissue products cut to specified dimensions, or by determining the mass and area of a specified number of units of finished tissue products.</p>"

38320,IS,,ISO 12625-7:2007,Tissue paper and tissue products — Part 7: Determination of optical properties,Papier tissue et produits tissues — Partie 7: Détermination des propriétés optiques,2007-02-13,1,['85.080.20'],ISO/TC 6/SC 2,9599,,[57834],"['en','fr','ru']",10,"<p>ISO 12625-7:2007 specifies test methods for the instrumental determination of optical properties of tissue paper and tissue products. The various test methods that are available have been, or are being, developed as International Standards.</p><p>ISO 12625-7:2007 also gives recommendations regarding relevant optical properties to be measured for different grades of tissue paper and tissue products and gives specific instructi

57834,IS,,ISO 12625-7:2014,Tissue paper and tissue products — Part 7: Determination of optical properties — Measurement of brightness and colour with D65/10° (outdoor daylight),Papier tissue et produits tissue — Partie 7: Détermination des propriétés optiques — Mesurage du degré de blancheur et de la couleur avec l'illuminant D65/10° (lumière du jour extérieure),2014-05-05,2,['85.080.20'],ISO/TC 6/SC 2,9599,[38320],[80326],"['en','fr']",11,"<p>ISO 12625-7:2014 specifies testing procedures for the instrumental determination of brightness and colour of tissue paper and tissue products viewed under outdoor daylight conditions. It also gives specific instructions for the preparation of test piec

40277,IS,,ISO 12625-8:2006,"Tissue paper and tissue products — Part 8: Water-absorption time and water-absorption capacity, basket- immersion test method","Papier tissue et produits tissues — Partie 8: Temps d'absorption d'eau et capacité d'absorption d'eau, méthode d'essai d'immersion au panier",2006-03-10,1,['85.080.20'],ISO/TC 6/SC 2,9599,,[53425],"['en','fr','ru']",8,<p>ISO 12625-8:2006 specifies basket-immersion test methods (one manual and one automated) for the determination of water-absorption time and water-absorption capacity of absorbent tissue paper and tissue products.</p>

38317,IS,,ISO 12625-9:2005,Tissue paper and tissue products — Part 9: Determination of ball burst strength,"Papier tissue et produits tissues — Partie 9: Détermination de la résistance à l'éclatement, méthode à la balle",2005-05-11,1,['85.080.20'],ISO/TC 6/SC 2,9599,,[63610],"['en','fr','ru']",7,<p>ISO 12625-9:2005 specifies a test method for the determination of the resistance to mechanical penetration (ball burst strength procedure) of tissue paper and tissue products.</p>

51603,IS,,ISO 12628:2011,"Thermal insulating products for building equipment and industrial installations — Determination of dimensions, squareness and linearity of preformed pipe insulation","Produits isolants thermiques pour les équipements des bâtiments et les installations industrielles — Détermination des dimensions, de l'équerrage et de la linéarité des coquilles isolantes préformées",2011-01-06,1,['91.100.60'],ISO/TC 163/SC 1,9599,,[81156],['en'],10,"<p>ISO 12628:2011 specifies the equipment and procedures for determining the dimensions, squareness and linearity of preformed pipe insulation, supplied in one piece, half sections or segments. It is applicable to thermal insulating produ

51604,IS,,ISO 12629:2011,Thermal insulating products for building equipment and industrial installations — Determination of water vapour transmission properties of preformed pipe insulation,Produits isolants thermiques pour les équipements des bâtiments et les installations industrielles — Détermination des propriétés de transmission de la vapeur d'eau des coquilles isolantes préformées,2011-01-06,1,['91.100.60'],ISO/TC 163/SC 1,9599,,[81154],['en'],12,<p>ISO 12629:2011 specifies the equipment and procedure for determining the water vapour transmission properties in the steady state under specified test conditions for test specimens of preformed pipe insulation. It is applicable to thermal i

51613,IS,,ISO 12631:2012,Thermal performance of curtain walling — Calculation of thermal transmittance,Performance thermique des façades-rideaux — Calcul du coefficient de transmission thermique,2012-09-24,1,['91.120.10'],ISO/TC 163/SC 2,9599,,[66762],"['en','fr']",49,

2153,IS,,ISO 12634:1996,Graphic technology — Determination of tack of paste inks and vehicles by a rotary tackmeter,"Technologie graphique — Détermination de la consistance des encres et excipients projetés, à l'aide d'un consistomètre rotatif",1996-11-14,1,['87.080'],ISO/TC 130,9599,,[60585],['en'],3,<p>Specifies the procedure for determining the tack value of paste inks and vehicles which have low volatility and are unreactiv under normal conditions during the time span required for testing. Contains a description of the rotary tackmeters most commonly used.</p>

2161,IS,,ISO 12635:1996,Graphic technology — Plates for offset printing — Dimensions,Technologie graphique — Plaques pour impression offset — Dimensions,1996-06-20,1,['37.100.10'],ISO/TC 130,9599,,[43886],['en'],4,

43886,IS,,ISO 12635:2008,Graphic technology — Plates for offset printing — Dimensions,Technologie graphique — Plaques pour impression offset — Dimensions,2008-11-20,2,['37.100.10'],ISO/TC 130,9599,[2161],[80069],['en'],11,"<p>ISO 12635:2008 specifies the width, length and thickness of metal lithographic printing plates (referred to in the document as “plates”). For plates to be used in computer to plate (CtP) applications, flatness, edge straightness and burr requirements are also included. These requirements are applicable to unprocessed plates.</p>"

20569,IS,,ISO 12636:1998,Graphic technology — Blankets for offset printing,Technologie graphique — Blanchets pour impression offset,1998-07-09,1,['37.100.10'],ISO/TC 130,9599,,"[60578,70552]",['en'],8,

23391,IS,,ISO 12637-2:1997,Graphic technology — Multilingual terminology of printing arts — Part 2: Screen printing terms,Technologie graphique — Terminologie multilingue des arts graphiques — Partie 2: Termes d'impression au cadre,1997-04-10,1,"['01.040.37','37.100.01']",ISO/TC 130,9599,,[35503],['en'],13,

35503,IS,,ISO 12637-5:2001,Graphic technology — Multilingual terminology of printing arts — Part 5: Screen printing terms,Technologie graphique — Terminologie multilingue des arts graphiques — Partie 5: Termes d'impression au cadre,2001-06-21,1,"['01.040.37','37.100.01']",ISO/TC 130,9599,[23391],[35295],['en'],11,

2181,IS,,ISO 12639:1998,Graphic technology — Prepress digital data exchange — Tag image file format for image technology (TIFF/IT),Technologie graphique — Échange de données numériques de préimpression — Format de fichier d'image d'étiquette pour la technologie d'image,1998-09-24,1,"['35.240.30','37.100.99']",ISO/TC 130,9599,,[34342],['en'],43,

35110,IS,,ISO 12640-3:2007,Graphic technology — Prepress digital data exchange — Part 3: CIELAB standard colour image data (CIELAB/SCID),Technologie graphique — Échange de données numériques de préimpression — Partie 3: Données d'images en couleur normalisées CIELAB (CIELAB/SCID),2007-07-03,1,"['35.240.30','37.100.99']",ISO/TC 130,9599,,[84131],['en'],33,"<p>ISO 12640-3:2007 specifies a set of standard large gamut colour images (encoded as 16-bit CIELAB digital data) that can be used for the evaluation of changes in image quality during coding, image processing (including transformation, compression and decompression), displaying on a colour monitor and printing. These images can be used for

68807,IS,,ISO 12641-1:2016,Graphic technology — Prepress digital data exchange — Colour targets for input scanner calibration — Part 1: Colour targets for input scanner calibration,Technologie graphique — Échange de données numériques de préimpression — Cibles de couleur pour étalonnage à l'entrée du scanner — Partie 1:,2016-05-02,1,"['35.240.30','37.100.99']",ISO/TC 130,9599,[2079],[84133],['en'],25,<p>ISO 12641-1:2016 defines the layout and colorimetric values of targets for use in the calibration of a photographic product/input scanner combination (as used in the preparatory process for printing and publishing). One target is defined for positive colour transparency film and another is de

2079,IS,,ISO 12641:1997,Graphic technology — Prepress digital data exchange — Colour targets for input scanner calibration,Technologie graphique — Échange de données numériques de préimpression — Cibles de couleur pour étalonnage à l'entrée du scanner,1997-09-25,1,"['35.240.30','37.100.99']",ISO/TC 130,9599,,"[68575,68807]",['en'],20,

1611,IS,,ISO 12642-1:1996,Graphic technology — Input data for characterization of 4-colour process printing — Part 1: Initial data set,Technologie graphique — Données d'entrée pour caractérisation d'impression en quadrichromie — Partie 1: Ensemble de données initiales,1996-12-26,1,"['35.240.30','37.100.99']",ISO/TC 130,9599,,[55410],['en'],20,"<p>Defines an input data file, a measurement procedure and an output data format for use in characterizing any four-colour printing process.</p>"

42296,IS,Cor,ISO 12642-1:1996/Cor 1:2005,Graphic technology — Input data for characterization of 4-colour process printing — Part 1: Initial data set — Technical Corrigendum 1,Technologie graphique — Données d'entrée pour caractérisation d'impression en quadrichromie — Partie 1: Ensemble de données initiales — Rectificatif technique 1,2005-09-23,1,"['35.240.30','37.100.99']",ISO/TC 130,9599,,[55410],['en'],1,

41289,IS,,ISO 12643-1:2007,Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements,Technologie graphique — Exigences de sécurité pour les systèmes et l'équipement de technologie graphique — Partie 1: Exigences générales,2007-02-28,1,['37.100.10'],ISO/TC 130,9599,"[38032,31703]",[51711],['en'],77,"<p>ISO 12643-1:2007 provides safety specifications for the design and construction of new machines used in printing press systems and in binding and finishing systems. It includes equipment used in a stand-alone mode, or in combination with other machines, including ancillary equipment, in which all the machine actuators (e.g. drives) of t

51711,IS,,ISO 12643-1:2009,Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements,Technologie graphique — Exigences de sécurité pour les systèmes et l'équipement de technologie graphique — Partie 1: Exigences générales,2009-12-07,2,['37.100.10'],ISO/TC 130,9599,[41289],"[61469,69477]",['en'],81,"<p>ISO 12643-1:2009 provides safety specifications for the design and construction of new equipment used in prepress systems, printing press systems, binding and finishing systems, converting systems and stand‑alone platen presses. It is applicable to equipment used in a stand-alone mode, or in combination with other machines, including an

41290,IS,,ISO 12643-2:2007,Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Press equipment and systems,Technologie graphique — Exigences de sécurité pour les systèmes et l'équipement de technologie graphique — Partie 2: Systèmes et équipement pour la presse,2007-03-28,1,['37.100.10'],ISO/TC 130,9599,[38032],[53042],['en'],44,<p>ISO 12643-2:2007 provides requirements specific to press equipment and systems. It is used in conjunction with the general requirements given in ISO 12643-1.</p><p>ISO 12643-2:2007 provides additional safety requirements for the design and construction of new press equipment and the auxiliary equipment integrated into th

53042,IS,,ISO 12643-2:2010,Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems,Technologie graphique — Exigences de sécurité pour les systèmes et l'équipement de technologie graphique — Partie 2: Systèmes et équipement pour la préimpression et la presse,2010-12-15,2,['37.100.10'],ISO/TC 130,9599,[41290],"[62300,69478]",['en'],49,"<p>ISO 12643-2:2010 provides requirements specific to prepress and press equipment and systems. It is intended to be used in conjunction with the general requirements of ISO 12643-1.</p><p>ISO 12643-2:2010 provides additional safety requirements for the design and construction of ne

41291,IS,,ISO 12643-3:2008,Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems,Technologie graphique — Exigences de sécurité pour l'équipement et les systèmes de technologie graphique — Partie 3: Équipment et systèmes de reliure et de finissage,2008-02-25,1,['37.100.10'],ISO/TC 130,9599,[31703],[53411],['en'],52,"<p>ISO 12643-3:2008 provides requirements specific to binding and finishing equipment and systems. It is intended to be used in conjunction with the general requirements given in ISO 12643-1.</p><p>ISO 12643-3:2008 provides additional safety requirements for the design and construction of new equ

53411,IS,,ISO 12643-3:2010,Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems,Technologie graphique — Exigences de sécurité pour les systèmes et l'équipement de technologie graphique — Partie 3: Systèmes et équipement de reliure et de finissage,2010-12-15,2,['37.100.10'],ISO/TC 130,9599,[41291],"[69479,62299]",['en'],56,"<p>ISO 12643-3:2010 provides safety requirements specific to binding and finishing equipment and systems. It is intended to be used in conjunction with the general requirements given in ISO 12643-1.</p><p>ISO 12643-3:2010 provides additional safety requirements for the design and constru

51712,IS,,ISO 12643-4:2010,Graphic technology — Safety requirements for graphic technology equipment and systems — Part 4: Converting equipment and systems,Technologie graphique — Exigences de sécurité pour les systèmes et l'équipement de technologie graphique — Partie 4: Systèmes et équipement de façonnage,2010-02-25,1,['37.100.10'],ISO/TC 130,9599,,"[62301,69480]",['en'],51,"<p>ISO 12643-4:2010 provides safety requirements for the design and construction of converting equipment used in the package printing, converting and graphic technology industries. It is applicable to converting equipment, not covered by other parts of ISO 12643. It is intended to be used in conjunction with the genera

53694,IS,,ISO 12643-5:2010,Graphic technology — Safety requirements for graphic technology equipment and systems — Part 5: Stand-alone platen presses,Technologie graphique — Exigences de sécurité pour les systèmes et l'équipement de technologie graphique — Partie 5: Presses à plateaux autonomes,2010-12-15,1,['37.100.10'],ISO/TC 130,9599,,[74370],['en'],10,"<p>ISO 12643-5:2010 provides safety requirements specific to stand-alone platen presses. It is intended to be used in conjunction with the general requirements given in ISO 12643-1.</p><p>ISO 12643-5:2010 provides additional press design safety requirements for the design and construction of new manually fed or automatic stand-alone platen

40071,IS,,ISO 12646:2004,Graphic technology — Displays for colour proofing — Characteristics and viewing conditions,Technologie graphique — Affichages pour la réalisation d'épreuves en couleur — Caractéristiques et conditions d'examen visuel,2004-03-26,1,['37.100.01'],ISO/TC 130,9599,,[44468],['en'],12,"<p>ISO 12646:2004 specifies requirements for uniformity, size, resolution, convergence, refresh rate, luminance levels and viewing conditions for a colour display used to simulate a hard copy proofing system.</p>"

44468,IS,,ISO 12646:2008,Graphic technology — Displays for colour proofing — Characteristics and viewing conditions,Technologie graphique — Affichages pour la réalisation d'épreuves en couleur — Caractéristiques et conditions d'examen visuel,2008-05-26,2,['37.100.01'],ISO/TC 130,9599,[40071],[57311],['en'],18,"<p>ISO 12646:2008 specifies the minimum requirements for the properties of displays to be used for soft proofing of colour images. Included are requirements for uniformity, convergence, refresh rate, display diagonal size, spatial resolution and glare of the screen surface. The dependence of colorimetric properties on the electrical drive signals and viewing direction, especially for f

53464,IS,Amd,ISO 12646:2008/Amd 1:2010,Graphic technology — Displays for colour proofing — Characteristics and viewing conditions — Amendment 1,Technologie graphique — Affichages pour la réalisation d'épreuves en couleur — Caractéristiques et conditions d'examen visuel — Amendement 1,2010-08-20,2,['37.100.01'],ISO/TC 130,9599,,[57311],['en'],2,

1971,IS,,ISO 12647-1:1996,"Graphic technology — Process control for the manufacture of half-tone colour separations, proof and production prints — Part 1: Parameters and measurement methods","Technologie graphique — Maîtrise de procédé pour la fabrication des séparations de couleur en ton tramé, des épreuves et des tirages en production — Partie 1: Paramètres et méthodes de mesure",1996-10-10,1,['37.100.01'],ISO/TC 130,9599,,[37801],['en'],12,

37801,IS,,ISO 12647-1:2004,"Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 1: Parameters and measurement methods","Technologie graphique — Maîtrise de procédé pour la production des séparations de couleur en ton tramé, des épreuves et des tirages en production — Partie 1: Paramètres et méthodes de mesurage",2004-07-21,2,['37.100.01'],ISO/TC 130,9599,[1971],[57816],['en'],21,"<p>ISO 12647-1:2004 specify parameters that define printing conditions for the various processes used in the graphic arts industry. Practitioners wishing to work to common goals may use the values of the parameters specified in the exchange of d

23392,IS,,ISO 12647-2:1996,"Graphic technology — Process control for the manufacture of half-tone colour separations, proof and production prints — Part 2: Offset lithographic processes","Technologie graphique — Maîtrise des procédés pour la fabrication des séparations de couleur en ton tramé, des épreuves et des tirages en production — Partie 2: Procédés offset lithographiques",1996-12-05,1,['37.100.01'],ISO/TC 130,9599,,[37880],['en'],15,<p>Specifies some process parameters and their values to be applied when preparing colour separations for four-colour offset printing.</p>

37880,IS,,ISO 12647-2:2004,"Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 2: Offset lithographic processes","Technologie graphique — Maîtrise des procédés pour la fabrication des séparations de couleur en ton tramé, des épreuves et des tirages en production — Partie 2: Procédés lithographiques offset",2004-11-23,2,['37.100.01'],ISO/TC 130,9599,[23392],[57833],['en'],19,"<p>ISO 12647-2:2004 specifies a number of process parameters and their values to be applied when preparing colour separations for four-colour offset printing or when producing four-colour prints by one of the following methods: heat-set web, sheet-f

43977,IS,Amd,ISO 12647-2:2004/Amd 1:2007,"Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 2: Offset lithographic processes — Amendment 1","Technologie graphique — Maîtrise des procédés pour la fabrication des séparations de couleur en ton tramé, des épreuves et des tirages en production — Partie 2: Procédés lithographiques offset — Amendement 1",2007-04-17,2,['37.100.01'],ISO/TC 130,9599,,[57833],['en'],5,

23393,IS,,ISO 12647-3:1998,"Graphic technology — Process control for the manufacture of half-tone colour separations, proofs and production prints — Part 3: Coldset offset lithography and letterpress on newsprint","Technologie graphique — Contrôle du processus de confection de sélections couleurs tramées, d'épreuves et de tirages — Partie 3: Impression offset sans sécheur et typographique sur papier journal",1998-03-26,1,['37.100.01'],ISO/TC 130,9599,,[39480],['en'],8,

39480,IS,,ISO 12647-3:2005,"Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 3: Coldset offset lithography on newsprint","Technologie graphique — Contrôle du processus de confection de sélections couleurs tramées, d'épreuves et de tirages — Partie 3: Impression offset sans sécheur sur papier journal",2005-09-28,2,['37.100.01'],ISO/TC 130,9599,[23393],[57840],['en'],15,"<p>ISO 12647-3:2005 specifies a number of process parameters and their values to be applied when preparing colour separations for newspaper single or four-colour printing and proofing. The parameters and values are chosen in consideration of the comple

40022,IS,,ISO 12647-4:2005,"Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 4: Publication gravure printing","Technologie graphique — Contrôle des processus de confection de sélections couleurs tramées, d'épreuves et de tirages — Partie 4: Processus de gravure",2005-11-08,1,['37.100.01'],ISO/TC 130,9599,,[55411],['en'],13,"<p>ISO 12647-4:2005 specifies a number of process parameters and their values to be applied to four-colour publication gravure printing. The parameters and values are chosen in view of the complete process covering the process stages colour separation, making of the printing forme, proof productio

25436,IS,,ISO 12647-5:2001,"Graphic technology — Process control for the manufacture of half-tone colour separations, proof and production prints — Part 5: Screen printing","Technologie graphique — Contrôle du processus de confection de sélections couleurs tramées, d'épreuves et de tirages — Partie 5: Sérigraphie",2001-12-20,1,['37.100.01'],ISO/TC 130,9599,,[60479],['en'],10,"<p>This part of ISO 12647 specifies a number of process parameters and their values to be applied when preparing colour separations for four-colour screen process printing when producing four-colour proof and production prints by flat bed or cylinder screen printing.</p><p>The parameters and values are chosen in view o

32046,IS,,ISO 12647-6:2006,"Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 6: Flexographic printing","Technologie graphique — Contrôle des processus de confection de sélections couleurs tramées, d'épreuves et de tirages — Partie 6: Processus flexographique",2006-04-06,1,['37.100.01'],ISO/TC 130,9599,,[55037],['en'],9,"<p>ISO 12647-6:2006 specifies a number of process parameters and their values to be applied to four-colour process printing by the flexographic printing process for packaging and publication, excluding newsprinting. The parameters and values are chosen in view of the complete process covering the proc

55037,IS,,ISO 12647-6:2012,"Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 6: Flexographic printing","Technologie graphique — Contrôle des processus de confection de sélections couleurs tramées, d'épreuves et de tirages — Partie 6: Processus flexographique",2012-12-11,2,['37.100.01'],ISO/TC 130,9599,[32046],[75219],['en'],15,"<p>ISO 12647:2012 specifies the requirements for the exchange of data and information necessary for the definition of the aims for four-colour flexographic printing of packaging and publication materials, including newsprint. It is based on the use of colour characterization data to define the

68411,IS,Amd,ISO 12647-6:2012/Amd 1:2015,"Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 6: Flexographic printing — Amendment 1","Technologie graphique — Contrôle des processus de confection de sélections couleurs tramées, d'épreuves et de tirages — Partie 6: Processus flexographique — Amendement 1",2015-10-06,2,['37.100.01'],ISO/TC 130,9599,,[75219],['en'],1,

43428,IS,,ISO 12647-7:2007,"Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 7: Proofing processes working directly from digital data","Technologie graphique — Contrôle des processus de confection de sélections couleurs tramées, d'épreuves et de tirages — Partie 7: Processus d'épreuve travaillant directement à partir de données numériques",2007-12-06,1,['37.100.01'],ISO/TC 130,9599,,[63032],['en'],20,"<p>ISO 12647-7:2007 specifies requirements for systems that are used to produce hard-copy digital proof prints intended to simulate a printing condition defined by a set of characterization data. Recommendations are prov

63032,IS,,ISO 12647-7:2013,"Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 7: Proofing processes working directly from digital data","Technologie graphique — Contrôle des processus de confection de sélections couleurs tramées, d'épreuves et de tirages — Partie 7: Processus d'épreuve travaillant directement à partir de données numériques",2013-07-19,2,['37.100.01'],ISO/TC 130,9599,[43428],[66426],"['en','ru']",22,<p>ISO 12647-7:2013 specifies requirements for systems that are used to produce hard-copy digital proof prints intended to simulate a printing condition defined by a set of characterization data. Recommendat

53436,IS,,ISO 12647-8:2012,"Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 8: Validation print processes working directly from digital data","Technologie graphique — Contrôle des processus de confection de sélections couleurs tramées, d'épreuves et de tirages — Partie 8: Processus d'impression de maquette couleur produite à partir de données numériques",2012-03-16,1,['37.100.01'],ISO/TC 130,9599,,[77104],"['en','ru']",16,"<p>ISO 12647-8:2012 specifies requirements that can be used for determining the conformance of systems that produce a hard-copy validation print, directly from digital data, which is intended to si

31702,IS,,ISO 12648:2003,Graphic technology — Safety requirements for printing press systems,Technologie graphique — Exigences de sécurité pour systèmes de presses d'impression,2003-04-08,1,['37.100.10'],ISO/TC 130,9599,,[38032],['en'],91,"<p>ISO 12648:2002 applies to printing press systems, including auxiliary equipment and finishing machines, in which all the machine actuators (e.g. drives) of the equipment in the system are controlled by the same control system.</p><p>It is applicable only to systems in which a printing press is part of the system. In cases where a binding/finishing system is not integrated with a printing press, ISO 12649 will apply.</p><p>ISO 12648:2002 provides safety

38032,IS,,ISO 12648:2006,Graphic technology — Safety requirements for printing press systems,Technologie graphique — Exigences de sécurité pour systèmes de presses à imprimer,2006-01-13,2,['37.100.10'],ISO/TC 130,9599,[31702],"[41289,41290]",['en'],107,"<p>ISO 12648:2006 provides safety requirements for the design and construction of machines used in printing press systems, including auxiliary equipment and finishing machines, in which all the machine actuators (e.g. drives) of the equipment in the system are controlled by the same control system.</p><p>It is applicable only to systems in which a printing press is part of the system.</p><p>It addresses recognized hazards specific to printing

31703,IS,,ISO 12649:2004,Graphic technology — Safety requirements for binding and finishing systems and equipment,Technologie graphique — Exigences de sécurité pour les systèmes et les équipements de reliure et de finition,2004-04-26,1,['37.100.01'],ISO/TC 130,9599,,"[41289,41291]",['en'],118,"<p>ISO 12649:2004 provides safety specifications for the design and construction of binding and finishing equipment operated in a system configuration or in stand-alone mode. It provides safety requirements for the design and construction of equipment used to convert printed or blank substrates into cut, folded, collated, assembled, bound, or otherwise finished product. It may also be applied to proces

5867,IS,,ISO 1265:1979,Plastics — Polyvinyl chloride resins — Determination of number of impurities and foreign particles,Plastiques — Résines de polychlorure de vinyle — Détermination du nombre d'impuretés et corps étrangers,1979-07-01,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[34842],"['en','fr']",3,"<p>Specification of a visual method of determining the number of impurities and foreign particles in polyvinylchloride resin. About 200 g of resin are flattened between a rigid white plate and a glass sheet containing a grid. The impurities and foreign particles visible in 25 squares (= 225 cm ) and having a diameter equal or greater than 0,250 mm are counted. Expression of the result by extrapolat

1885,IS,,ISO 12651:1999,Electronic imaging — Vocabulary,Imagerie électronique — Vocabulaire,1999-12-09,1,"['01.040.37','37.080']",ISO/TC 171/SC 1,9599,,"[54755,42673,41051]","['en','fr']",22,

51648,IS,,ISO 12671:2012,Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings,Projection thermique — Revêtements appliqués par projection thermique — Représentation symbolique sur les dessins,2012-07-24,1,"['25.220.20','01.080.30']",ISO/TC 107,9599,,[75428],"['en','fr']",7,<p>ISO 12671:2012 specifies how the symbolic representation of thermally sprayed coatings has to be indicated on drawings.</p>

36648,IS,,ISO 12677:2003,Chemical analysis of refractory products by XRF — Fused cast bead method,Analyse chimique des matériaux réfractaires par fluorescence de rayons X — Méthode de la perle fondue,2003-05-09,1,['81.080'],ISO/TC 33,9599,,[51445],"['en','fr']",74,"<p>ISO 12677:2003 specifies a method for chemical analysis of refractory products and materials, and technical ceramics composed of oxides, including the determination of oxide at levels between 0,01 % and 99 % by means of the XRF fused cast bead method.</p>"

5869,IS,,ISO 1268:1974,"Plastics — Preparation of glass fibre reinforced, resin bonded, low-pressure laminated plates or panels for test purposes",Matières plastiques — Préparation de plaques ou de panneaux en stratifiés verre textile-résine basse-pression pour la réalisation d'éprouvettes,1974-11-01,1,['83.120'],ISO/TC 61/SC 13,9599,,"[27248,27245,34856,27249,34857,25213,27250,27247,5868,27251,27244]","['en','fr']",6,<p>Specification of standard procedures for the preparation of test plates for subsequent preparation of test specimens by bonding glass cloth or mats with low pressure thermosetting resins. Three methods are specified: Method A: Glass reinforcement and liquid resin with suitab

5870,IS,,ISO 1269:1980,Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of volatile matter (including water),Plastiques — Résines d'homopolymères et de copolymères de chlorure de vinyle — Détermination des matières volatiles (y compris l'eau),1980-11-01,2,['83.080.20'],ISO/TC 61/SC 9,9599,,[39135],"['en','fr']",2,"<p>A test portion of resin is spreaded out in a weighing dish, weighed to the nearest 0,000 5 g and dried at 110 °C to constant mass. The volatile matter is expressed as percentage of the original weight.</p>"

53656,IS,,ISO 12696:2012,Cathodic protection of steel in concrete,Protection cathodique de l'acier dans le béton,2012-01-30,1,"['77.060','77.140.15']",ISO/TC 156,9599,[39863],[71133],"['en','fr']",45,"<p>ISO 12696:2011 specifies performance requirements for cathodic protection of steel in cement-based concrete, in both new and existing structures. It covers building and civil engineering structures, including normal reinforcement and prestressed reinforcement embedded in the concrete. It is applicable to uncoated steel reinforcement and to organic-coated steel reinforcement.</p><p>ISO 12696:2011 applies to steel embedded in atmospherically exposed, buried, immersed and tidal elements of buil

71133,IS,,ISO 12696:2016,Cathodic protection of steel in concrete,Protection cathodique de l'acier dans le béton,2016-11-29,2,"['77.060','77.140.15']",ISO/TC 156,9599,[53656],[77205],"['en','fr']",47,"<p>ISO 12696:2016 specifies performance requirements for cathodic protection of steel in cement-based concrete, in both new and existing structures. It covers building and civil engineering structures, including normal reinforcement and prestressed reinforcement embedded in the concrete. It is applicable to uncoated steel reinforcement and to organic-coated steel reinforcement.</p><p>ISO 12696:2016 applies to steel embedded in atmospherically exposed, buried, immersed and tidal elements of buil

3934,IS,,ISO 127:1972,Natural rubber latex — Determination of KOH number,Latex de caoutchouc — Détermination de l'indice de potasse,1972-08-01,1,['83.040.10'],ISO/TC 45,9599,,"[3936,3935]",['en'],2,

3935,IS,,ISO 127:1984,"Rubber latex, natural — Determination of KOH number",Latex de caoutchouc naturel — Détermination de l'indice de potasse,1984-04-01,2,['83.040.10'],ISO/TC 45/SC 3,9599,[3934],[3936],"['en','fr']",2,

3936,IS,,ISO 127:1995,"Rubber, natural latex concentrate — Determination of KOH number",Latex concentré de caoutchouc naturel — Détermination de l'indice de potasse,1995-11-23,3,['83.040.10'],ISO/TC 45/SC 3,9599,"[3934,3935]",[57896],"['en','fr']",6,"<p>Gives a method for the determination of the KOH number of natural rubber latex concentrate which is preserved wholly or in part with ammonia. Applicable to latices containing boric acid, but not applicable to latices preserved with potassium hydroxide. Replaces the second edition which has been technically revised.</p>"

42826,IS,Amd,ISO 127:1995/Amd 1:2006,"Rubber, natural latex concentrate — Determination of KOH number — Amendment 1: Precision data",Latex concentré de caoutchouc naturel — Détermination de l'indice de potasse — Amendement 1: Données de fidélité,2006-02-02,3,['83.040.10'],ISO/TC 45/SC 3,9599,,[57896],"['en','fr']",2,

57896,IS,,ISO 127:2012,"Rubber, natural latex concentrate — Determination of KOH number",Latex concentré de caoutchouc naturel — Détermination de l'indice de potasse,2012-04-04,4,['83.040.10'],ISO/TC 45/SC 3,9599,"[3936,42826]",[75102],"['en','fr']",10,

5871,IS,,ISO 1270:1975,Plastics — PVC resins — Determination of ash and sulphated ash,Matières plastiques — Résines de polychlorure de vinyle — Détermination des cendres et des cendres sulfatées,1975-06-01,1,['83.080.20'],ISO/TC 61,9599,,[8786],"['en','fr']",2,

1955,IS,,ISO 12706:2000,Non-destructive testing — Terminology - Terms used in penetrant testing,Essais non destructifs — Terminologie - Termes utilisés en contrôle par ressuage,2000-11-23,1,"['01.040.19','19.100']",ISO/TC 135/SC 2,9599,,"[53772,45113]","['en','fr']",13,

2323,IS,,ISO 12715:1999,Ultrasonic non-destructive testing — Reference blocks and test procedures for the characterization of contact search unit beam profiles,Contrôles non destructifs par ultrasons — Blocs de référence et modes opératoires des essais pour la caractérisation des faisceaux des traducteurs utilisés dans les contrôles par contact,1999-09-02,1,['19.100'],ISO/TC 135/SC 3,9599,,[57039],"['en','fr']",24,

34090,IS,,ISO 12716:2001,Non-destructive testing — Acoustic emission inspection — Vocabulary,Essais non destructifs — Contrôle par émission acoustique — Vocabulaire,2001-06-21,1,"['01.040.19','19.100']",ISO/TC 135/SC 9,9599,,"[87479,71892]","['en','fr']",11,<p>This International Standard defines the terminology that is used in acoustic emission inspection and forms a</p><p>common basis for standards and general use.</p>

43738,IS,,ISO 12718:2008,Non-destructive testing — Eddy current testing — Vocabulary,Essais non destructifs — Contrôle par courants de Foucault — Vocabulaire,2008-08-13,1,"['01.040.19','19.100']",ISO/TC 135/SC 4,9599,,[75549],"['de','en','fr']",41,"<p>ISO 12718:2008 defines terms used in eddy current testing.</p><p>In addition to terms used in English and French, two of the three official ISO languages, this document gives the equivalent terms in German; these are published under the responsibility of the member body for Germany (DIN), and are given for information only. Only the terms and definitions given in the official languages can be considered as ISO terms and definitions.</p>" 43739,

5873,IS,,ISO 1272:1973,Essential oils — Determination of phenols content,Huiles essentielles — Évaluation de la teneur en phénols,1973-12-01,1,['71.100.60'],ISO/TC 54,9599,,[25314],"['en','fr']",2,

1766,IS,,ISO 12725:1997,Nickel and nickel alloy castings,Pièces moulées en nickel et alliages de nickel,1997-07-17,1,['77.150.40'],ISO/TC 155,9599,,[70212],"['en','fr']",7,

51655,IS,,ISO 12736:2014,"Petroleum and natural gas industries — Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures","Industries du pétrole et du gaz naturel — Revêtements pour isolation thermique humide de canalisations, lignes d'écoulement et structures sous-marines",2014-12-17,1,"['25.220.20','75.180.10']",ISO/TC 67/SC 2,9599,,"[79584,81792,81793]","['en','fr']",74,"<p>ISO 12736:2014 defines the minimum requirements for qualification, application, testing, handling, storage and transportation of new and existing wet thermal insulation systems for pipelines, flowlines, equipment and subsea structures in the petroleum and natural gas industries. The p

1579,IS,,ISO 12737:1996,Metallic materials — Determination of plane-strain fracture toughness,Matériaux métalliques — Détermination du facteur d'intensité de contrainte critique,1996-11-14,1,['77.040.10'],ISO/TC 164/SC 4,9599,,[40887],"['en','fr']",17,<p>Method for determining the plan-strain fracture toughness of homogeneous metallic materials using a specimen that is notched and precracked by fatigue.</p>

40887,IS,,ISO 12737:2005,Metallic materials — Determination of plane-strain fracture toughness,Matériaux métalliques — Détermination du facteur d'intensité de contrainte critique,2005-07-29,2,['77.040.10'],ISO/TC 164/SC 4,9599,"[1579,37766]",[55919],"['en','fr']",18,"<p>ISO 12737:2005 specifies the ISO method for determining the plane-strain fracture toughness of homogeneous metallic materials using a specimen that is notched and precracked by fatigue, and subjected to a slowly increasing crack displacement force.</p>"

2661,IS,,ISO 12739:1997,Zinc sulfide concentrates — Determination of zinc content — Ion-exchange/EDTA titrimetric method,Concentrés sulfurés de zinc — Dosage du zinc — Méthode par échange d'ions et titrage à l'EDTA,1997-11-06,1,['73.060.99'],ISO/TC 183,9599,,[37617],['en'],21,

2649,IS,,ISO 12742:2000,"Copper, lead and zinc sulfide concentrates — Determination of transportable moisture limits — Flow table method","Concentrés sulfurés de cuivre, de plomb et de zinc — Détermination des limites d'humidité transportable — Méthode de la table d'écoulement",2000-03-23,1,['73.060.99'],ISO/TC 183,9599,,[39285],['en'],16,