Withdrawn and superseded ISO standards — page 245 of 246

38604,TS,,ISO/TS 22475-3:2007,Geotechnical investigation and testing — Sampling methods and groundwater measurements — Part 3: Conformity assessment of enterprises and personnel by third party,Reconnaissance et essais géotechniques — Méthodes de prélèvement et mesurages piézométriques — Partie 3: Évaluation de la conformité des entreprises et du personnel par un organisme tiers,2007-09-18,1,"['03.100.30','03.120.20','93.020']",ISO/TC 182,9599,,"[71004,78325,78326]",['en'],9,<p>ISO/TS 22475-3:2007 is applicable to the conformity assessment of enterprises and personnel performing specified parts of sampling and groundwater measurements according to ISO 22475-1 and complying with the technical

37559,TS,,ISO/TS 22476-10:2005,Geotechnical investigation and testing — Field testing — Part 10: Weight sounding test,Reconnaissance et essais géotechniques — Essais en place — Partie 10: Essai de sondage par poids,2005-05-25,1,['93.020'],ISO/TC 182,9599,,[69313],"['en','fr']",6,"<p>ISO/TS 22476-10:2005 specifies laboratory test methods to establish the effective shear strength parameter for soils within the scope of the geotechnical investigations according to EN 1997-1 and EN 1997-2.</p><p>The test method consists of placing the test specimen in the direct shear device, applying a pre-determined normal stress, providing for draining (and wetting if required) of the test specimen, or both,

37560,TS,,ISO/TS 22476-11:2005,Geotechnical investigation and testing — Field testing — Part 11: Flat dilatometer test,Reconnaissance et essais géotechniques — Essais en place — Partie 11: Essai au dilatomètre plat,2005-05-25,1,['93.020'],ISO/TC 182,9599,,[66434],"['en','fr']",9,<p>ISO/TS 22476-11 comprises requirements for ground investigations by means of the flat dilatometer test (DMT) as part of the geotechnical investigation services according to EN 1997-1 and EN 1997-2.</p>

73333,TS,,ISO/TS 22499:2019,Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using phased array ultrasonic testing,Tubes en matières thermoplastiques pour le transport des fluides - Contrôle des assemblages par soudage bout à bout en polyéthylène au moyen de la technique par ultrasons multi-éléments,2019-10-01,1,['23.040.20'],ISO/TC 138/SC 5,9599,,[83936],['en'],21,"<p>This document describes the phased array ultrasonic testing (PAUT) of polyethylene butt fusion (BF) joints, including pipe-to-pipe, pipe-to-fitting and fitting-to-fitting joints, used for the conveyance of fluids. This document provides a test, whereby the presence of imperfectio

36318,TS,,ISO/TS 22559-1:2004,Safety requirements for lifts (elevators) — Part 1: Global essential safety requirements (GESRs),Exigences de sécurité des ascenseurs — Partie 1: Exigences essentielles de sécurité globale des ascenseurs,2004-01-12,1,['91.140.90'],ISO/TC 178,9599,,"[61455,46491]","['en','fr']",26,"<p>ISO/TS 22559-1:2004 specifies global essential safety requirements (GESRs) for lifts (elevators), their components and functions, and establishes a system and provides methods for minimizing safety risks that may arise in the course of, the operation and use of, or work on, lifts.</p><p>ISO/TS 22559-1:2004 is applicable to lifts that: a) are intended to carry persons, and that can b

39749,TS,,ISO/TS 22559-2:2010,Safety requirements for lifts (elevators) — Part 2: Safety parameters meeting the global essential safety requirements (GESRs),Exigences de sécurité des ascenseurs — Partie 2: Paramètres de securité repondant aux exigences essentielles de sécurité globale des ascenseurs,2010-09-03,1,['91.140.90'],ISO/TC 178,9599,,"[73073,64026]",['en'],33,"<p>ISO/TS 22559-2:2010 specifies global safety parameters (GSPs) for lifts (elevators), their components and their functions, and complements the system and methods specified in ISO/TS 22559-1 for mitigating safety risks that can arise in the course of the operation and use of, or work on, lifts (elevators).</p><p>ISO/TS 22559

43193,TS,,ISO/TS 22559-3:2011,"Safety requirements for lifts (elevators) — Part 3: Global conformity assessment procedures (GCAP) — Prerequisites for certification of conformity of lift systems, lift components and lift functions","Exigences de sécurité des ascenseurs — Partie 3: Procédures d'évaluation globale de conformité — Prérequis pour la certification de la conformité des systèmes, des composants et des fonctions des ascenseurs",2011-09-12,1,['91.140.90'],ISO/TC 178,9599,,[73074],['en'],7,"<p>ISO/TS 22559-3:2011 specifies prerequisite requirements for application for a global conformity assessment procedure (GCAP) certificate of conformity for new lift (elevator) systems, lift compone

46490,TS,,ISO/TS 22559-4:2011,Safety requirements for lifts (elevators) — Part 4: Global conformity assessment procedures (GCAP) — Certification and accreditation requirements,Exigences de sécurité des ascenseurs — Partie 4: Procédures d'évaluation globale de conformité — Conditions de certification et d'accréditation,2011-09-12,1,['91.140.90'],ISO/TC 178,9599,,[73075],['en'],9,"<p>ISO/TS 22559-4:2011 specifies</p><ol><li> requirements for certification of conformity for model lifts, lift (elevator) systems, lift components or lift functions by global conformity assessment bodies (GCAB),</li><li> related responsibilities of GCABs, and</li><li> requirements for accreditat

73506,TS,,ISO/TS 22583:2019,Guidance for supervisors and operators of point-of-care testing (POCT) devices,Titre manque,2019-11-18,1,"['03.100.30','11.100.01']",ISO/TC 212,9599,,"[87549,87680]",['en'],35,"<p>This document gives guidance for supervisors and operators of point-of-care testing (POCT) services where POCT is performed without medical laboratory training, supervision or support. It includes the key components that should be considered to provide safe and reliable POCT results.</p><p>Self-testing is excluded from this document.</p>"

42081,TS,,ISO/TS 22595-2:2008,Dentistry — Plant area equipment — Part 2: Compressor systems,Art dentaire — Installation de la zone technique — Partie 2: Systèmes de compression,2008-07-17,1,['11.060.20'],ISO/TC 106/SC 6,9599,,[72421],"['en','fr']",14,"<p>ISO/TS 22595-2:2008 applies to compressor units for dental air and specifies quality requirements for dental air, fittings, pipe lines and valves in the plant area, used to source compressed air for the dental units, dental instruments and technical dental lab equipment.</p><p>ISO/TS 22595-2:2008 gives recommended guidelines for performance as well as test procedures for compressor units for dental air with at least a compressor motor set in

36337,TS,,ISO/TS 22600-1:2006,Health informatics — Privilege management and access control — Part 1: Overview and policy management,Informatique de santé — Gestion de privilèges et contrôle d'accès — Partie 1: Vue d'ensemble et gestion des politiques,2006-07-24,1,['35.240.80'],ISO/TC 215,9599,,[62653],['en'],28,"<p>ISO/TS 22600-1:2006 is intended to support the needs of healthcare information sharing across unaffiliated providers of healthcare, healthcare organizations, health insurance companies, their patients, staff members and trading partners. It is also intended to support inquiries from both individuals and application systems.</p><p>ISO/TS 22600-1:2006 supports collaboration between

40930,TS,,ISO/TS 22600-2:2006,Health informatics — Privilege management and access control — Part 2: Formal models,Informatique de santé — Gestion de privilèges et contrôle d'accès — Partie 2: Modèles formels,2006-07-24,1,['35.240.80'],ISO/TC 215,9599,,[62654],['en'],27,"<p>ISO/TS 22600-2:2006 is intended to support the needs of healthcare information sharing across unaffiliated providers of healthcare, healthcare organizations, health insurance companies, their patients, staff members and trading partners. It is also intended to support inquiries from both individuals and application systems.</p><p>ISO/TS 22600-2:2006 supports collaboration between several authorization managers that may op

45376,TS,,ISO/TS 22600-3:2009,Health informatics — Privilege management and access control — Part 3: Implementations,Informatique de santé — Gestion de privilèges et contrôle d'accès — Partie 3: Mises en oeuvre,2009-11-20,1,['35.240.80'],ISO/TC 215,9599,,[62655],['en'],70,<p>ISO/TS 22600-3:2009 instantiates requirements for repositories for access control policies and requirements for privilege management infrastructures for health informatics. It provides implementation examples of the formal models specified in ISO/TS 22600-2:2006.</p>

73634,TS,,ISO/TS 22638:2018,Rubber — Generation and collection of tyre and road wear particles (TRWP) — Road simulator laboratory method,Caoutchouc — Génération et collecte des particules émises par l'usure des pneumatiques et de la route (TRWP) — Méthode de simulation routière en laboratoire,2018-07-05,1,"['13.020.40','83.060','83.160.01']",ISO/TC 45,9599,,[84313],"['en','fr']",8,"<p>This document specifies a method for the generation of tyre and road wear particles (TRWP) in a road simulator laboratory that is representative of actual driving conditions. Guidance is provided for the road simulator system, test pavement and tyres, vacuum collection system, monitoring, and reporting.</p><p>T

73636,TS,,ISO/TS 22640:2018,Rubber — Framework for physical and chemical characterization of tyre and road wear particles (TRWP),Caoutchouc — Lignes directrices pour la caractérisation physique et chimique des particules émises par l'usure des pneumatiques et de la route (TRWP),2018-07-13,1,"['13.020.40','83.060','83.160.01']",ISO/TC 45,9599,,[84314],"['en','fr']",8,"<p>This document provides a framework for the characterization of physical and chemical properties of tyre and road wear particles (TRWP) using published analytical standards. It is applicable to laboratory-generated TRWP and TRWP collected in the environment.</p><p>NOTE This framework focuses primarily on published ISO st

73747,TS,,ISO/TS 22726-1:2023,Intelligent transport systems — Dynamic data and map database specification for connected and automated driving system applications — Part 1: Architecture and logical data model for harmonization of static map data,Systèmes de transport intelligents — Spécification de données dynamiques et de bases de données cartographiques pour les applications de système de conduite connectées et automatisées — Partie 1: Architecture et modèle logique de données pour l'harmonisation des données cartographiques statiques,2023-06-29,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,"[87599,88210]",['en'],146,

44191,TS,,ISO/TS 22745-1:2009,Industrial automation systems and integration — Open technical dictionaries and their application to master data — Part 1: Overview and fundamental principles,Systèmes d'automatisation industrielle et intégration — Dictionnaires techniques ouverts et leurs applications aux données permanentes — Partie 1: Aperçu général et principes fondamentaux,2009-03-02,1,['25.040.01'],ISO/TC 184/SC 4,9599,,[53995],['en'],3,"<p>ISO/TS 22745-1:2009 contains an introduction to ISO/TS 22745. It includes:</p><ul><li><p>the scope of ISO/TS 22745;</p></li><li><p>requirements that all open technical dictionaries must follow;</p></li><li><p>a description of the architecture of ISO/TS

44193,TS,,ISO/TS 22745-11:2009,Industrial automation systems and integration — Open technical dictionaries and their application to master data — Part 11: Guidelines for the formulation of terminology,Systèmes d'automatisation industrielle et intégration — Dictionnaires techniques ouverts et leurs applications aux données permanentes — Partie 11: Lignes directrices pour la formulation de la terminologie,2009-03-02,1,['25.040.01'],ISO/TC 184/SC 4,9599,,[53999],['en'],1,<p>ISO/TS 22745-11:2009 provides guidelines that are recommended for thedevelopment of terminology for concepts in an open technicaldictionary (OTD).</p><p>Compliance with these guidelines is not required in order for aterm or

44195,TS,,ISO/TS 22745-13:2009,Industrial automation systems and integration — Open technical dictionaries and their application to master data — Part 13: Identification of concepts and terminology,Systèmes d'automatisation industrielle et intégration — Dictionnaires techniques ouverts et leurs applications aux données permanentes — Partie 13: Identification des concepts et de la terminologie,2009-03-02,1,['25.040.01'],ISO/TC 184/SC 4,9599,,[54000],['en'],1,"<p>ISO/TS 22745-13:2009 specifies rules for identification of concepts,terms, definitions and images within an open technical dictionary(OTD).</p>"

51855,TS,,ISO/TS 22745-2:2009,Industrial automation systems and integration — Open technical dictionaries and their application to master data — Part 2: Vocabulary,Systèmes d'automatisation industrielle et intégration — Dictionnaires techniques ouverts et leurs applications aux données permanentes — Partie 2: Vocabulaire,2009-03-02,1,"['25.040.01','01.040.25']",ISO/TC 184/SC 4,9599,,[53997],['en'],1,<p>ISO/TS 22745-2:2009 contains vocabulary for ISO/TS 22745.</p>

44196,TS,,ISO/TS 22745-20:2009,Industrial automation systems and integration — Open technical dictionaries and their application to master data — Part 20: Procedures for the maintenance of an open technical dictionary,Systèmes d'automatisation industrielle et intégration — Dictionnaires techniques ouverts et leurs applications aux données permanentes — Partie 20: Modes opératoires de maintenance d'un dictionnaire technique ouvert,2009-03-02,1,['25.040.01'],ISO/TC 184/SC 4,9599,,[54003],['en'],2,"<p>ISO/TS 22745-20:2009 contains procedures for maintenance of an opentechnical dictionary (OTD). It includes procedures to:</p><ul><li><p>register a consensus organization so that it can contributet

62220,TS,,ISO/TS 22762-4:2014,Elastomeric seismic-protection isolators — Part 4: Guidance on the application of ISO 22762-3,Appareils d'appuis structuraux en élastomère pour protection sismique — Partie 4: Lignes directrices pour l'application de l'ISO 22762-3,2014-07-04,1,"['83.140.99','91.120.25']",ISO/TC 45/SC 4,9599,,[75517],['en'],31,<p>ISO/TS 22762‑4:2014 provides guidance on the use of ISO 22762‑3:2010. It includes example design calculations and provides data on the characteristics obtained from all types of elastomeric isolators.</p>

35125,TS,,ISO/TS 22763:2002,Crop protection equipment — Sprayers — Demonstration track for field crop sprayers,Matériel de protection des cultures — Pulvérisateurs — Piste de démonstration pour les pulvérisateurs,2002-08-15,1,['65.060.40'],ISO/TC 23/SC 6,9599,,[40125],['en'],3,"<p>ISO/TS 22763:2002 specifies a uniform demonstration track for showing the spray boom movement of field crop sprayers in practical demonstrations and the like. The track specified can be used in demonstrations of mounted, trailed or self-propelled sprayers.</p>"

35216,TS,,ISO/TS 22911:2005,Dentistry — Preclinical evaluation of dental implant systems — Animal test methods,Art dentaire — Évaluation préclinique des systèmes d'implants dentaires — Méthodes d'essai sur les animaux,2005-09-19,1,['11.060.15'],ISO/TC 106/SC 8,9599,,[61084],"['en','fr','ru']",7,"<p>ISO/TS 22911:2005 concerns animal tests relevant to the functional assessment of dental implant systems, using both macroscopic and microscopic parameters. It is intended for use only<b> </b>when risk analysis indicates a need for additional information that only animal testing can provide.</p>"

61084,TS,,ISO/TS 22911:2016,Dentistry — Preclinical evaluation of dental implant systems — Animal test methods,Médecine bucco-dentaire — Évaluation préclinique des systèmes d'implants dentaires — Méthodes d'essai sur les animaux,2016-07-11,2,['11.060.15'],ISO/TC 106/SC 8,9599,[35216],[71503],"['en','fr']",7,"<p>ISO/TS 22911:2016 concerns animal tests relevant to the functional assessment of dental implant systems, using both macroscopic and microscopic parameters. It is intended for use only when risk analysis indicates a need for additional information that only animal testing can provide.</p><p>ISO/TS 22911:2016 is not intended to provide information on the mechanical strength of implantab

41226,TS,,ISO/TS 22939:2010,Soil quality — Measurement of enzyme activity patterns in soil samples using fluorogenic substrates in micro-well plates,Qualité du sol — Mesure en microplaques de l'activité enzymatique dans des échantillons de sol en utilisant des substrats fluorogènes,2010-03-08,1,['13.080.30'],ISO/TC 190/SC 4,9599,,[74739],"['en','fr']",13,"<p>ISO/TS 22939:2010 specifies a method for the measurement of several enzyme activities simultaneously in soil samples. Enzyme activities of soil vary seasonally and depend on the chemical, physical and biological characteristics of soil. Its application for the detection of harmful effects of toxic chemicals or other anthropogenic impacts

41258,TS,,ISO/TS 22964:2006,Milk and milk products — Detection of Enterobacter sakazakii,Lait et produits laitiers — Détection de l'Enterobacter sakazakii,2006-01-30,1,"['67.100.01','07.100.30']",ISO/TC 34/SC 9,9599,,[64708],['en'],13,<p>ISO/TS 22964|IDF/RM 210:2006 specifies a method for the detection of <i>Enterobacter sakazakii</i> in milk powder and powdered infant formula. </p><p>The method is also applicable to environmental samples collected from milk powder or infant formula factories.</p>

74324,TS,,ISO/TS 23016-1:2019,Fine bubble technology — Agricultural applications — Part 1: Test method for evaluating the growth promotion of hydroponically grown lettuce,Technologie des fines bulles — Applications agricoles — Partie 1: Titre manque,2019-05-20,1,"['07.030','65.020.20']",ISO/TC 281,9599,,[89133],['en'],12,<p>This document specifies a test method for evaluating the effect of fine bubble water on the growth promotion of hydroponically grown lettuce by estimating the incremental gain in mass of the stems and leaves over a specified growth period.</p>

36627,TS,,ISO/TS 23081-1:2004,Information and documentation - Records management processes - Metadata for records — Part 1: Principles,Information et documentation — Processus de 'Records management ' — Métadonnées pour les documents — Partie 1: Principes,2004-04-27,1,['01.140.20'],ISO/TC 46/SC 11,9599,,[40832],['en'],18,<p>ISO/TS 23081-1:2004 covers the principles that underpin and govern records management metadata.</p>

43390,TS,,ISO/TS 23081-2:2007,Information and documentation — Records management processes — Metadata for records — Part 2: Conceptual and implementation issues,Information et documentation — Processus de gestion des enregistrements — Métadonnées pour les enregistrements — Partie 2: Sujets conceptuels et de mise en oeuvre,2007-07-30,1,['01.140.20'],ISO/TC 46/SC 11,9599,,[50863],['en'],34,"<p>ISO/TS 23081-2:2007 establishes a framework for defining metadata elements consistent with the principles and implementation considerations outlined in ISO 23081-1:2006. The purpose of this framework is to:</p><ul><li>enable standardized description of records and critical contextual entities for records

75189,TS,,ISO/TS 23301:2021,STEP geometry visualization services,Services de visualisation de la géométrie STEP,2021-12-22,1,"['25.040.40','03.080.99']",ISO/TC 184/SC 4,9599,,[84820],['en'],27,"<p>This document defines a set of metadata to support the audit trail of the transformation of a geometry definition, while it is distributed and shared in supply-chains, to ensure the traceability of geometric model data. It also defines a set of web services based on the utilisation of these metadata.</p><p>The following are within the scope of this document:</p><p>— metadata definitions for geometry transformation audit trail:</p><p>— syntax for storing these metadata in geometry data sets in

75452,TS,,ISO/TS 23406:2020,Nuclear sector — Requirements for bodies providing audit and certification of quality management systems for organizations supplying products and services important to nuclear safety (ITNS),Secteur nucléaire — Exigences pour les organismes procédant à l'audit et à la certification des systèmes de management de la qualité d'organisations fournissant des produits et services importants pour la sûreté nucléaire (IPSN),2020-01-31,1,"['03.120.20','27.120.01']",ISO/TC 85,9599,,[85777],"['en','fr']",16,"<p>This document complements the existing requirements of ISO/IEC 17021-1 for bodies providing audit and certification of quality management systems against ISO 19443.</p

80715,TS,,ISO/TS 23494-1:2023,Biotechnology — Provenance information model for biological material and data — Part 1: Design concepts and general requirements,Titre manque — Partie 1: Titre manque,2023-04-12,1,['07.080'],ISO/TC 276,9599,,[89266],['en'],7,"<p class='MsoBodyText' style='mso-layout-grid-align: none; text-autospace: none;'><span lang='EN-GB' style='mso-bidi-font-size: 12.0pt;'>This document specifies a general concept for a provenance information model for biological material and data and requirements for provenance data interoperability and serialization.</span></p><p class='MsoBodyText' style='mso-layout-grid-align: none; text-autospace: none;'><span lang='EN-GB' style='mso-bi

75854,TS,,ISO/TS 23511:2023,Biotechnology — General requirements and considerations for cell line authentication,Biotechnologie — Exigences et considérations générales relatives à l'authentification de la lignée cellulaire,2023-05-18,1,['07.080'],ISO/TC 276,9599,,[87312],['en'],18,"<p class='MsoBodyText' style='mso-layout-grid-align: none; text-autospace: none;'><span lang='EN-GB' style='mso-bidi-font-size: 12.0pt; mso-fareast-font-family: SimSun;'>This document defines terms related to cell line authentication in the field of biotechnology. It describes the general principles, detection strategies and analytical methods for cell line authentication. It specifies requirements and key conside

76438,TS,,ISO/TS 23625:2021,Small craft — Lithium-ion batteries,Petits navires — Batteries lithium-ion,2021-03-31,1,['47.080'],ISO/TC 188,9599,,[85220],"['en','fr']",9,"<p>This document provides requirements and recommendations for the selection and installation of lithium-ion batteries for boats. It applies to lithium-ion batteries and to battery systems with a capacity greater than 600 Wh, installed on small craft for providing power for general electrical loads and/or to electric propulsion systems. It is primarily intended for manufacturers and battery installers.</p>"

41845,TS,,ISO/TS 23768-1:2011,Rolling bearings — Parts library — Part 1: Reference dictionary for rolling bearings,Roulements — Bibliothèque de composants — Partie 1: Dictionnaire de référence des roulements,2011-11-23,1,"['21.100.20','01.040.21']",ISO/TC 4,9599,,[80542],"['en','fr']",67,"<p>ISO/TS 23768-1:2011 specifies a reference dictionary for all rolling bearings described in the various International Standards relevant to rolling bearings, together with their descriptive properties and domains of values.</p><p>It specifies a reference dictionary that contains:</p><ul><li>a definition of a general class of bearings intended to be further extended by reference dictionaries specifying bea

76964,TS,,ISO/TS 23792-1:2023,Intelligent transport systems — Motorway chauffeur systems (MCS) — Part 1: Framework and general requirements,Systèmes de transport intelligents — Systèmes de conduite automatisée sur voie à chaussée séparée (MCS) — Partie 1: Cadre et exigences générales,2023-06-09,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[87293],['en'],30,"<p class='MsoBodyText' style='mso-layout-grid-align: none; text-autospace: none;'><span lang='EN-GB' style='mso-bidi-font-size: 12.0pt; mso-fareast-font-family: 'MS Mincho';'>Motorway chauffeur systems (MCS) perform Level 3 automated driving</span><span lang='EN-GB' style='mso-bidi-font-size: 12.0pt; mso-fareast-font-family: 'MS Mincho'

41865,TS,,ISO/TS 23810:2006,Cardiovascular implants and artificial organs — Checklist for preoperative extracorporeal circulation equipment setup,Implants cardiovasculaires et organes artificiels — Liste de contrôle pour l'installation d'équipement de circulation extracorporelle préopératoire,2006-07-07,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[59739],"['en','ru']",10,"<p>ISO/TS 23810:2006 covers activities performed by perfusionists during equipment setup prior to cardiopulmonary bypass (CPB), extracorporeal membrane oxygenation (ECMO), cardiopulmonary support (CPS), left or right heart bypass (LHB, RHB) and venovenous (VV) extracorporeal support for liver transplantation.</p>"

59739,TS,,ISO/TS 23810:2012,Cardiovascular implants and artificial organs — Checklist for preoperative extracorporeal circulation equipment setup,Implants cardiovasculaires et organes artificiels — Liste de contrôle pour l'installation d'équipement de circulation extracorporelle préopératoire,2012-04-04,2,['11.040.40'],ISO/TC 150/SC 2,9599,[41865],[69838],"['en','ru']",10,"<p>ISO/TS 23810:2012 covers the activities performed by perfusionists during preoperative extracorporeal circulation (ECC) equipment setup prior to cardiopulmonary bypass (CPB), extracorporeal membrane oxygenation (ECMO), cardiopulmonary support (CPS), left or right heart bypass (LHB/RHB) or venovenous (VV) extracorporeal

77047,TS,,ISO/TS 23818-1:2020,Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines — Part 1: Polyethylene (PE) material,Évaluation de la conformité des systèmes de canalisations en plastique destinés à la réhabilitation des réseaux existants — Partie 1: Matériau Polyéthylène (PE),2020-02-26,1,['23.040.20'],ISO/TC 138/SC 8,9599,,[85931],['en'],44,"<p>This document provides a scheme for the assessment of conformity of PE products and assemblies for the rehabilitation of existing pipelines, in accordance with the applicable parts of ISO 11296, ISO 11297, ISO 11298, ISO 11299 and ISO 21225, and intended to be included in the manufacturer's quality plan

77049,TS,,ISO/TS 23818-3:2021,Assessment of conformity of plastics piping systems for the rehabilitation of existing pipelines — Part 3: Unplasticised poly(vinyl chloride) (PVC-U) material,Évaluation de la conformité des systèmes de canalisations en plastique destinés à la réhabilitation des réseaux existants — Partie 3: Matériau poly(chlorure de vinyle) non-plastifié (PVC-U),2021-03-22,1,['23.040.20'],ISO/TC 138/SC 8,9599,,[85933],['en'],20,"<p>This document provides a scheme for the assessment of conformity of PVC-U products and assemblies for the rehabilitation of existing pipelines, in accordance with the applicable parts of ISO 11296 and intended to be included in the manufacturer's qua

77412,TS,,ISO/TS 23942:2020,Determination of hydroxytyrosol and tyrosol content in extra virgin olive oils — Reverse phase high performance liquid chromatography (RP-HPLC),Détermination de la teneur en hydroxytyrosol et tyrosol dans les huiles d'olive vierges extra — Chromatographie liquide à haute performance en phase inverse (CLHP-RP),2020-07-22,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[82781],"['en','fr']",10,<p>This document specifies a method for the quantitative determination of hydroxytyrosol and tyrosol content in extra virgin olive oils using reverse phase high performance liquid chromatography (RP-HPLC) with spectrophotometric detection. The method is also applicable to all other oliv

37101,TS,,ISO/TS 24155:2007,Hydrometry — Hydrometric data transmission systems — Specification of system requirements,Hydrométrie — Systèmes de transmission des données hydrométriques — Spécification des exigences des systèmes,2007-05-03,1,['17.120.20'],ISO/TC 113/SC 5,9599,,[59774],['en'],34,<p>ISO/TS 24155:2007 specifies the technical requirements that should be considered in designing and operating hydrometric data transmission systems and the necessary functions of those systems.</p>

37166,TS,,ISO/TS 24348:2003,Ophthalmic optics — Spectacle frames — Method for the simulation of wear and detection of nickel release from coated metal and combination spectacle frames,Optique ophtalmique — Montures de lunettes — Méthode de simulation de l'usure et de détection de la libération du nickel de montures de lunettes en métal revêtu et combinées,2003-05-13,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[40585],"['en','fr']",15,"<p>ISO/TS 24348 specifies methods for simulating two years' use and for testing for the release of nickel from those parts of metal and combination spectacle frames intended to come into direct and prolonged contact with the skin, in order to determine whether such p

40585,TS,,ISO/TS 24348:2007,Ophthalmic optics — Spectacle frames — Method for the simulation of wear and detection of nickel release from metal and combination spectacle frames,Optique ophtalmique — Montures de lunettes — Méthode de simulation de l'usure et de détection de la libération du nickel de montures de lunettes en métal et combinées,2007-07-04,2,['11.040.70'],ISO/TC 172/SC 7,9599,[37166],[61819],['en'],17,"<p>ISO/TS 24348:2007 specifies methods for accelerated wear and corrosion to be used prior to the detection of nickel release from coated metal and combination spectacle frames, and for detecting the release of nickel from those parts of metal and combination spectacle frames, whe

61819,TS,,ISO/TS 24348:2014,Ophthalmic optics — Spectacle frames — Method for the simulation of wear and detection of nickel release from metal and combination spectacle frames,Optique ophtalmique — Montures de lunettes — Méthode de simulation de l'usure et de détection de la libération du nickel de montures de lunettes en métal et combinées,2014-02-03,3,['11.040.70'],ISO/TC 172/SC 7,9599,[40585],[83359],['en'],19,"<p>ISO/TS 24348:2014 specifies methods for accelerated wear and corrosion, to be used prior to the detection of nickel release from coated metal and combination spectacle frames, and for detecting the release of nickel from those parts of metal and combination spectacle frames, wh

41696,TS,,ISO/TS 24534-1:2007,Automatic vehicle and equipment identification — Electronic Registration Identification (ERI) for vehicles — Part 1: Architecture,Identification automatique des véhicules et des équipements — Identification d'enregistrement électronique (ERI) pour les véhicules — Partie 1: Architecture,2007-12-10,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[51849],['en'],9,"<p>ISO TS 24534-1:2007 provides the requirements for electronic registration that is based on an identifier assigned to a vehicle (e.g. for recognition by national authorities), suitable to be used for :</p><ul><li>electronic identification of local and foreign vehicles by national authorities,</li><li>veh

41697,TS,,ISO/TS 24534-2:2007,Automatic vehicle and equipment identification — Electronic Registration Identification (ERI) for vehicles — Part 2: Operational requirements,Identification automatique des véhicules et des équipements — Identification d'enregistrement électronique (ERI) pour les véhicules — Partie 2: Exigences de fonctionnement,2007-12-10,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[51850],['en'],17,"<p>ISO TS 24534-2:2007 provides the requirements for Electronic registration that are based on an identifier assigned to a vehicle (e.g. for recognition by national authorities), suitable to be used for :</p><ul><li>electronic identification of local and foreign vehicles by nati

41698,TS,,ISO/TS 24534-3:2008,Automatic vehicle and equipment identification — Electronic Registration Identification (ERI) for vehicles — Part 3: Vehicle data,Identification automatique des véhicules et des équipements — Identification d'enregistrement électronique (ERI) pour les véhicules — Partie 3: Données du véhicule,2008-02-11,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[51851],['en'],32,"<p>ISO TS 24534-3:2008 provides the requirements for an Electronic Registration Identification (ERI) that is based on an identifier assigned to a vehicle (e.g. for recognition by national authorities) suitable to be used for :</p><ul><li>electronic identification of local and foreign vehicles by na

41699,TS,,ISO/TS 24534-4:2008,Automatic vehicle and equipment identification — Electronic Registration Identification (ERI) for vehicles — Part 4: Secure communications using asymmetrical techniques,Identification automatique des véhicules et des équipements — Identification d'enregistrement électronique (ERI) pour les véhicules — Partie 4: Communications sûres utilisant des techniques asymétriques,2008-02-11,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[51852],['en'],95,"<p>ISO TS 24534-4:2008 provides the requirements for an Electronic Registration Identification (ERI) that is based on an identifier assigned to a vehicle (e.g. for recognition by national authorities) and suitable to be u

46201,TS,,ISO/TS 24534-5:2008,Automatic vehicle and equipment identification — Electronic Registration Identification (ERI) for vehicles — Part 5: Secure communications using symmetrical techniques,Identification automatique des véhicules et des équipements — Identification d'enregistrement électronique (ERI) pour les véhicules — Partie 5: Communications sécurisées utilisant des techniques symétriques,2008-02-11,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[54570],['en'],38,"<div id='MathJax_Message' style='display: none;'></div><p>ISO/TS 24534-5:2008 provides the requirements for an Electronic Registration Identification (ERI) using symmetric encryption techniques that are</p><ul><li>base

79080,TS,,ISO/TS 24634:2021,Management of terminology resources — TBX-compliant representation of concept relations and subject fields,Gestion des ressources terminologiques — Représentation des relations conceptuelles et des domaines conforme à TBX,2021-11-03,1,"['35.240.30','01.020']",ISO/TC 37/SC 3,9599,,[87352],['en'],15,<p>This document provides requirements and recommendations for representing subject fields and concept relations in TBX-compliant terminological document instances. Examples in this document utilize the DCA style of TBX markup.</p>

79333,TS,,ISO/TS 24667:2020,Sports and recreational facilities — Impact surfacing testing device,Installations sportives et récréatives — Dispositif d'essai de revêtement d'impact,2020-09-30,1,['97.220.01'],ISO/TC 83,9599,,[82864],"['en','fr']",6,"<p>This document gives the specifications for impact attenuation testing equipment used to evaluate the impact performance characteristics of playground surfacing. Its specifications are aimed at ensuring that developers and manufacturers of such instruments meet minimum performance characteristics to allow repeatable, reproducible and accurate results.</p><p>This document does not specify a test method.</p><p>NOTE Such test methods are covered

42357,TS,,ISO/TS 24679:2011,Fire safety engineering — Performance of structures in fire,Ingénierie de la sécurité incendie — Performance des structures en situation d'incendie,2011-03-10,1,['13.220.01'],ISO/TC 92/SC 4,9599,,"[72893,65264]","['en','fr']",26,"<p>ISO/TS 24679:2010 provides a methodology for assessing the performance of structures in the built environment when exposed to a real fire.</p><p>ISO/TS 24679:2010, which follows the principles outlined in ISO 23932, provides a performance-based methodology for engineers to assess the level of fire safety of new or existing structures.</p>"

42451,TS,,ISO/TS 24817:2006,"Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection","Industries du pétrole, de la pétrochimie et du gaz naturel — Réparations en matériau composite pour canalisations: Conformité aux exigences de performance et conception, installation, essai et inspection",2006-12-06,1,['75.180.20'],ISO/TC 67/SC 6,9599,,[59987],['en'],65,"<p>ISO/TS 24817:2006 gives requirements and recommendations for the qualification and design, installation, testing and inspection for the external application of composite repairs to corroded or damaged pipework used in the petroleum, petrochemi

42750,TS,,ISO/TS 25110:2008,Electronic fee collection — Interface definition for on-board account using integrated circuit card (ICC),Perception du télépéage — Définition d'interface pour compte de bord utilisant une carte à circuit intégré (ICC),2008-11-12,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[62476],['en'],34,"<div id='MathJax_Message' style='display: none;'></div><p>ISO/TS 25110:2008 defines the data transfer models between roadside equipment (RSE) and ICC, and the interface descriptions between RSE and OBE for on-board account using ICC. It also provides examples of interface definitions and transactions deployed in several countries.</p><p>ISO/TS 25110:2008 covers:</p><ul><li>

62476,TS,,ISO/TS 25110:2013,Electronic fee collection — Interface definition for on-board account using integrated circuit card (ICC),Perception du télépéage — Définition d'interface pour compte de bord utilisant une carte à circuit intégré (ICC),2013-05-02,2,"['35.240.60','03.220.01']",ISO/TC 204,9599,[42750],[72360],['en'],33,"<p>ISO/TS 25110:2013 defines the data transfer models between roadside equipment (RSE) and integrated circuit card (ICC), and the interface descriptions between RSE and on-board equipment (OBE) for on-board account using ICC. It also provides examples of interface definitions and transactions deployed in several countries.</p>"

42774,TS,,ISO/TS 25138:2010,Surface chemical analysis — Analysis of metal oxide films by glow-discharge optical-emission spectrometry,Analyse chimique des surfaces — Analyse de films d'oxyde de métal par spectrométrie d'émission optique à décharge luminescente,2010-11-22,1,['71.040.40'],ISO/TC 201/SC 8,9599,,[74823],['en'],36,"<p>ISO/TS 25138:2010 describes a glow-discharge optical-emission spectrometric method for the determination of the thickness, mass per unit area and chemical composition of metal oxide films.</p><p>The method is applicable to oxide films 1 nm to 10 000 nm thick on metals. The metallic elements of the oxide can include one or more from Fe, Cr, Ni, Cu, Ti, Si, Mo, Zn, Mg

74823,TS,,ISO/TS 25138:2019,Surface chemical analysis — Analysis of metal oxide films by glow-discharge optical-emission spectrometry,Analyse chimique des surfaces — Analyse de films d'oxyde de métal par spectrométrie d'émission optique à décharge luminescente,2019-08-06,2,['71.040.40'],ISO/TC 201/SC 8,9599,[42774],[87872],['en'],40,"<p>This document describes a glow-discharge optical-emission spectrometric method for the determination of the thickness, mass per unit area and chemical composition of metal oxide films.</p><p>This method is applicable to oxide films 1 nm to 10 000 nm thick on metals. The metallic elements of the oxide can include one or more from Fe, Cr, Ni, Cu, Ti, Si, Mo, Zn

42807,TS,,ISO/TS 25237:2008,Health informatics — Pseudonymization,Informatique de santé — Pseudonymisation,2008-11-24,1,['35.240.80'],ISO/TC 215,9599,,[63553],['en'],57,<p>ISO/TS 25237:2008 contains principles and requirements for privacy protection using pseudonymization services for the protection of personal health information. ISO/TS 25237:2008 is applicable to organizations who make a claim of trustworthiness for operations engaged in pseudonymization services.</p><p>ISO/TS 25237:2008:</p><ul><li>defines one basic concept for pseudonymization;</li><li>gives an overview of different use cases for pseudonymization that can be both reversible and irreversible;</li><li>defines one basic met

42894,TS,,ISO/TS 25377:2007,Hydrometric uncertainty guidance (HUG),Lignes directrices relatives à l'incertitude en hydrométrie,2007-09-18,1,['17.120.20'],ISO/TC 113,9599,,"[69367,59707]",['en'],51,<p>ISO/TS 25377:2007 provides an understanding of the nature of measurement uncertainty and its significance in estimating the quality of a measurement or a determination in hydrometry. It is applicable to flow measurements in natural and man-made channels. Rainfall measurements are not covered.</p>

57598,TS,,ISO/TS 26683-1:2012,"Intelligent transport systems — Freight land conveyance content identification and communication (FLC-CIC) — Part 1: Context, architecture and referenced standards","Systèmes intelligents de transport — Identification et communication du contenu des marchandises transportées par voie terrestre — Partie 1: Contexte, architecture et normes référencées",2012-05-09,1,"['35.240.60','55.180.01']",ISO/TC 204,9599,,[61000],['en'],77,"<p>ISO/TS 26683-1:2012 provides the context for application interface profiles for the exchange of land transport data using current technologies and existing standards for item identification, package identification, container identificat

57599,TS,,ISO/TS 26683-2:2012,Intelligent transport systems — Freight land conveyance content identification and communication (FLC-CIC) — Part 2: Application interface profiles,Systèmes intelligents de transport — Identification et communication du contenu des marchandises transportées par voie terrestre — Partie 2: Profils d'interface d'application,2012-04-23,1,"['35.240.60','55.180.01']",ISO/TC 204,9599,,[57600],['en'],39,"<p>ISO/TS 26683-2:2012 provides application interface profiles for land cargo transport data agglomeration and transfer (within the context and architecture described in ISO/TS 26683-1), using one or more of the reference list of International Standards defined in Annex

43997,TS,,ISO/TS 27105:2009,Milk and milk products — Determination of hen's egg white lysozyme by HPLC,Lait et produits laitiers — Détermination de lysozyme de blanc d'oeufs par CLHP,2009-11-27,1,['67.100.01'],ISO/TC 34/SC 5,9599,,[64584],"['en','fr','ru']",9,<p>ISO/TS 27105|IDF/RM 216:2009 specifies a method for the quantitative determination of hen's egg white lysozyme in milk and milk products.</p><p>The method is suitable for measuring low levels of hen's egg white lysozyme with a quantification limit of 5 mg/kg.</p>

44083,TS,,ISO/TS 27265:2009,Dried milk — Enumeration of the specially thermoresistant spores of thermophilic bacteria,Lait sec — Dénombrement des spores spécialement thermorésistantes des bactéries thermophiles,2009-07-28,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[85003],"['en','ru']",10,"<p>ISO/TS 27265|IDF/RM 228:2009 specifies a method for the enumeration of colony-forming units (CFU) of specially thermoresistant spores of thermophilic bacteria in dried milk products by using a colony-count technique at 55 °C after heating the sample at 106 °C.</p><p>The applicability of ISO/TS 27265|IDF/RM 228:2009 is limited to dried whole milk, skim milk, and buttermilk products that are destined to be reco

44174,TS,,ISO/TS 27469:2010,"Petroleum, petrochemical and natural gas industries - Method of test for fire dampers","Industries du pétrole, de la pétrochimie et du gaz naturel — Méthode d'essai des clapets coupe-feu",2010-01-22,1,['75.180.10'],ISO/TC 67/SC 6,9599,,[75287],['en'],17,"<p>ISO/TS 27469:2010 specifies a method for determining the following:</p><ol><li>ability of fire dampers installed in ventilation systems to prevent the spread of fire and heat through designated fire divisions; typical ratings are given in ISO 13702:1999, Table C.5.</li><li>fire damper operational reliability in the petroleum, petrochemical and natural gas industries, particularly offshore installations;</li><l

44216,TS,,ISO/TS 27527:2010,Health informatics — Provider identification,Informatique de santé — Identification du fournisseur,2010-07-20,1,['35.240.80'],ISO/TC 215,9599,,"[84640,84641]",['en'],76,"<p>ISO/TS 27527:2010 provides a framework for improving the positive identification of providers. Identification of 'providers' encompasses individuals<i> </i>and organizations<i>. </i>ISO/TS 27527:2010 includes data elements needed for identification of individual providers (i.e. individuals<i>)</i> and data elements needed for the identification of organization providers (i.e. organizations<i>)</i>. 'Identification' in ISO/TS 27527:2010 refers both to the process of being able to identify indivi

44278,TS,,ISO/TS 27687:2008,"Nanotechnologies — Terminology and definitions for nano-objects — Nanoparticle, nanofibre and nanoplate","Nanotechnologies — Terminologie et définitions relatives aux nano-objets — Nanoparticule, nanofibre et nanofeuillet",2008-08-11,1,"['07.120','01.040.07']",ISO/TC 229,9599,,[54440],"['en','fr']",7,<p>ISO/TS 27687:2008 lists unambiguous terms and definitions related to particles in the field of nanotechnologies. It is intended to facilitate communications between organizations and individuals in industry and those who interact with them.</p>

44316,TS,,ISO/TS 27790:2009,Health informatics — Document registry framework,Informatique de santé — Cadre d'enregistrement de document,2009-11-27,1,['35.240.80'],ISO/TC 215,9599,,[86413],['en'],24,"<p>ISO/TS 27790:2009 specifies a general purpose document registry framework for transmitting, storing and utilizing documents in clinical and personalized health environments. It is quite broad in its applicability to realise the goal of sharing health related documents spanning a broad spectrum of health domains such as healthcare specialities covering laboratory, cardiology, eye care, etc and the many areas of personalized health.</p><p>ISO/TS 27790:2009 also references a number of companion s

44416,TS,,ISO/TS 27893:2009,Vacuum technology — Vacuum gauges — Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge,Technique du vide — Manomètres à vide — Évaluation de l'incertitude des résultats des étalonnages par comparaison directe avec un manomètre de référence,2009-01-23,1,['23.160'],ISO/TC 112,9599,,[58068],['en'],15,"<p>ISO/TS 27893:2009 gives guidelines for the determination and reporting of measurement uncertainties arising during vacuum gauge calibration by direct comparison with a reference gauge in accordance with ISO/TS 3567. It describes methods for uniform reporting of uncertainties in vacuum gauge certificates. Uncertainti

44473,TS,,ISO/TS 28037:2010,Determination and use of straight-line calibration functions,Détermination et utilisation des fonctions d'étalonnage linéaire,2010-08-30,1,['03.120.30'],ISO/TC 69/SC 6,9599,,[84405],"['en','fr']",63,"<p>ISO/TS 28037:2010 is concerned with linear, that is, straight-line, calibration functions that describe the relationship between two variables <i>X</i> and <i>Y</i>, namely, functions of the form <i>Y</i> = <i>A</i> + <i>BX</i>. Although many of the principles apply to more general types of calibration function, the approaches described exploit the simple form of the straight-line calibration function wherever possible.</p><p>Values of the parameters <i>A</i> and <

62311,TS,,ISO/TS 28560-4:2014,Information and documentation — RFID in libraries — Part 4: Encoding of data elements based on rules from ISO/IEC 15962 in an RFID tag with partitioned memory,Information et documentation — RFID dans les bibliothèques — Partie 4: Encodage des éléments de données RFID fondé sur les règles de l'ISO/CEI 15962 dans une étiquette de RFID avec la mémoire divisée,2014-11-26,1,"['35.240.30','35.040.50']",ISO/TC 46/SC 4,9599,,[85151],['en'],56,"<p>ISO/TS 28560-4:2014 defines rules for ISO 28560‑1 data elements to be encoded in radio frequency identification (RFID) tags with a memory structure that is partitioned into four memory banks. This primarily applies to ISO/IEC 1

45042,TS,,ISO/TS 28923:2007,Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool,Matériel agricole - Protecteurs pour éléments mobiles de transmission de puissance - Protecteur à ouverture avec outil,2007-02-07,1,['65.060.01'],ISO/TC 23/SC 3,9599,,[55911],"['en','fr']",5,"<p>ISO/TS 28923:2007 gives safety requirements, and the means of verifying them, for the design and construction of guards, only able to be opened using a tool, which are used to guard the moving parts of the power transmission of self-propelled ride-on machines and mounted, semi-mounted or trailed machines used in agriculture. In addition, it specifies the type of information on

37124,TS,,ISO/TS 29001:2003,"Petroleum, petrochemical and natural gas industries — Sector-specific quality management systems — Requirements for product and service supply organizations","Industries du pétrole, de la pétrochimie et du gaz naturel — Systèmes de management de la qualité spécifiques au secteur — Exigences pour les organismes de fourniture de produits et services",2003-09-08,1,"['75.020','03.100.70']",ISO/TC 67,9599,,[42251],"['en','fr']",27,"<p>ISO/TS 29001:2003 defines the quality management system requirements for the design, development, production, installation and service of products for the petroleum, petrochemical and natural gas industries, based on ISO 9001:2000.</p><

42251,TS,,ISO/TS 29001:2007,"Petroleum, petrochemical and natural gas industries — Sector-specific quality management systems — Requirements for product and service supply organizations","Industries du pétrole, de la pétrochimie et du gaz naturel — Systèmes de management de la qualité spécifiques au secteur — Exigences pour les organismes de fourniture de produits et de services",2007-11-19,2,"['75.020','03.100.70']",ISO/TC 67,9599,[37124],[55499],"['en','fr']",27,"<p>ISO/TS 29001:2007 defines the quality management system for product and service supply organizations for the petroleum, petrochemical and natural gas industries.</p><p>Boxed text is original ISO 9001:2000 text unaltered and in

55499,TS,,ISO/TS 29001:2010,"Petroleum, petrochemical and natural gas industries — Sector-specific quality management systems — Requirements for product and service supply organizations","Industries du pétrole, de la pétrochimie et du gaz naturel — Systèmes de management de la qualité spécifiques au secteur — Exigences pour les organismes de fourniture de produits et de services",2010-05-25,3,"['75.020','03.100.70']",ISO/TC 67,9599,[42251],[67773],"['ar','en','fr','ru']",31,"<p>ISO/TS 29001:2010 defines the quality management system for product and service supply organizations for the petroleum, petrochemical and natural gas industries.</p><p>Boxed text is original ISO 9001:2008 text unalte

50774,TS,,ISO/TS 29002-10:2009,Industrial automation systems and integration — Exchange of characteristic data — Part 10: Characteristic data exchange format,Systèmes d'automatisation industrielle et intégration — Éc hange de données caractéristiques — Partie 10: Format d'échange de données caractéristiques,2009-11-30,1,['25.040.40'],ISO/TC 184/SC 4,9599,,"[86100,78517]",['en'],4,<p>ISO/TS 29002-10:2009 specifies a conceptual information modeland an exchange file format for characteristic data. The conceptualmodel is in Unified Modeling Language (UML). The physical fileformat is based on Extensible Markup Language (XML).</p>

50775,TS,,ISO/TS 29002-20:2010,Industrial automation systems and integration — Exchange of characteristic data — Part 20: Concept dictionary resolution services,Systèmes d'automatisation industrielle et intégration — Échange de données caractéristiques — Partie 20: Services de résolution d'un dictionnaire de concept,2010-04-01,1,['25.040.40'],ISO/TC 184/SC 4,9599,,"[86100,78517]",['en'],8,"<p>ISO/TS 29002-20:2010 specifies an interface to retrieveinformation from a concept dictionary. Three sets of capabilities,called 'services', are defined:</p><ul><li><p>Location Service: given a registration authority identifier,returns location on the Internet of Terminology and Ontologyservers for the r

53616,TS,,ISO/TS 29002-31:2009,Industrial automation systems and integration — Exchange of characteristic data — Part 31: Query for characteristic data,Systèmes d'automatisation industrielle et intégration — Échange de données caractéristiques — Partie 31: Recherche de données caractéristiques,2009-11-30,1,['25.040.40'],ISO/TC 184/SC 4,9599,,"[86100,78517]",['en'],3,<p>ISO/TS 29002-31:2009 specifies a conceptual information modeland an exchange file format for a query that requests product andservice characteristic data and supplier identification from itemand information suppliers. The conceptual model is in UnifiedModeling Language (UML). The physical file format is based onExtensible Mark

53726,TS,,ISO/TS 29002-4:2009,Industrial automation systems and integration — Exchange of characteristic data — Part 4: Basic entities and types,Systèmes d'automatisation industrielle et intégration — Échange de données caractéristiques — Partie 4: Entités et types de base,2009-11-30,1,['25.040.40'],ISO/TC 184/SC 4,9599,,"[86100,78517]",['en'],2,"<p>ISO/TS 29002-4:2009 specifies a conceptual information model andan exchange file format for basic entities and types that are usedas a resource by other parts of ISO/TS 29002. The conceptual modelis in Unified Modeling Language (UML). The physical data format isbased on Extensible Markup Language (XML).</p><p>ISO/TS 29002-4:2009 defines types for

50773,TS,,ISO/TS 29002-5:2009,Industrial automation systems and integration — Exchange of characteristic data — Part 5: Identification scheme,Systèmes d'automatisation industrielle et intégration — Échange de données caractéristiques — Partie 5: Schéma d'identification,2009-02-09,1,['25.040.40'],ISO/TC 184/SC 4,9599,,"[86100,78517]",['en'],1,"<p>ISO/TS 29002-5:2009 specifies the data elements and a syntax for anunambiguous identifier for an administered item. The identifier iscalled an 'international registration data identifier' (IRDI), asspecified in ISO/IEC 11179-5. An administered item is any registryitem for which administrative information is recorded. For thepurposes of ISO/TS 29002-5

53617,TS,,ISO/TS 29002-6:2010,Industrial automation systems and integration — Exchange of characteristic data — Part 6: Concept dictionary terminology reference model,Systèmes d'automatisation industrielle et intégration — Échange de données caractéristiques — Partie 6: Modèle de référence terminologique d'un dictionnaire de concept,2010-04-01,1,['25.040.40'],ISO/TC 184/SC 4,9599,,"[86100,78517]",['en'],3,"<p>ISO/TS 29002-6:2010 specifies a conceptual information model andan exchange file format for terminology information from a conceptdictionary. The conceptual model is in Unified Modeling Language(UML). The physical file format is based on Extensible MarkupLanguage (XML).</p><p>The XML st

45581,TS,,ISO/TS 29584:2012,Glass in building — Pendulum impact testing and classification of safety glass for use in buildings,Verre dans la construction — Essai d'impact au pendule et classification du verre de sécurité utilisé dans les bâtiments,2012-10-10,1,['81.040.20'],ISO/TC 160,9599,,[62469],['en'],43,"<p>ISO/TS 29584:2012 examines test methods currently employed to determine the pendulum impact performance of safety glass. Use of the methodologies in ISO/TS 29584:2012 improves the reproducibility of test results and gives a common basis of classification. The aim is for the performance of glass products manufactured and tested in various countries to be better understood and accepte

45582,TS,,ISO/TS 29585:2010,Health informatics — Deployment of a clinical data warehouse,Informatique de santé — Déploiement d'un entrepôt des données cliniques,2010-05-20,1,['35.240.80'],ISO/TC 215,9599,,[82180],['en'],57,"<p>ISO/TS 29585:2010 has three sections, 1) general considerations of design and deployment, 2) data aggregation and data modelling and 3) architecture and technology, and is intended to provide an overall set of guidelines for clinical data warehouse deployment supported by useful descriptions concerning different data aggregation and modelling approaches as well as particular aspects of information architecture that contribute to successful deployment. The first section

54070,TS,,ISO/TS 29843-2:2011,Soil quality — Determination of soil microbial diversity — Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method,Qualité du sol — Détermination de la diversité microbienne du sol — Partie 2: Méthode par analyse des acides gras phospholipidiques (PLFA) en utilisant la méthode simple d'extraction des PLFA,2011-09-12,1,['13.080.30'],ISO/TC 190/SC 4,9599,,[79820],"['en','fr']",7,<p>ISO/TS 29843-2:2011 specifies a simple method for the extraction of only phospholipid fatty acids (PLFA) from soils.</p>

78791,TS,,ISO/TS 31657-1:2020,Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 1: Calculation of multi-lobed and tilting pad journal bearings,titre manque — Partie 1: titre manque,2020-06-30,1,['21.100.10'],ISO/TC 123/SC 8,9599,,[88997],['en'],37,"<p>This document specifies the general principles, assumptions and preconditions for the calculation of multi-lobed and tilting-pad journal bearings by means of an easy-to-use calculation procedure based on numerous simplifying assumptions. For a reliable evaluation of the results of this calculation method, it is indispensable to consider the physical implications of these assumptions as well as practical e

78792,TS,,ISO/TS 31657-2:2020,Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 2: Functions for calculation of multi-lobed journal bearings,titre manque — Partie 2: titre manque,2020-06-10,1,['21.100.10'],ISO/TC 123/SC 8,9599,,[88998],['en'],67,"<p>This document specifies the characteristic values for selected two-, three- and four-lobe bearings.</p><p>The functions plotted and listed in table form below are required for the operationally safe design of hydrodynamic multi-lobed journal bearings according to ISO/TS 31657-1. They are based on the presumptions and boundary conditions indicated there and only apply to stationary operating states. The symb

78794,TS,,ISO/TS 31657-3:2020,Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 3: Functions for calculation of tilting pad journal bearings,Paliers lisses — Paliers lisses hydrodynamiques radiaux fonctionnant en régime stabilisé — Partie 3: Fonctions pour le calcul des paliers radiaux à patins oscillants,2020-06-24,1,['21.100.10'],ISO/TC 123/SC 8,9599,,[88999],['en'],73,"<p>This document specifies the characteristic values for selected tilting-pad journal bearings with four or five centrally or eccentrically supported tilting pads and with angular spans of pad sliding surfaces of <i>Ω</i> = 80°, 60° and 45°.</p><p>The functions plotted and listed in t

78797,TS,,ISO/TS 31657-4:2020,Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 4: Permissible operational parameters for calculation of multi-lobed and tilting pad journal bearings,titre manque — Partie 4: titre manque,2020-06-10,1,['21.100.10'],ISO/TC 123/SC 8,9599,,[89000],['en'],6,"<p>This document establishes the permissible operational parameters in terms of guide values for the calculation of selected multi-lobed and tilting-pad journal bearings.</p><p>In order to attain a sufficient operational safety of multi-lobed and tilting-pad journal bearings by the calculation according to ISO/TS 31657-1, it is necessary for the operational characteristi

40194,TS,,ISO/TS 3567:2005,Vacuum gauges — Calibration by direct comparison with a reference gauge,Manomètres — Étalonnage par comparaison directe avec un manomètre de référence,2005-08-18,1,['23.160'],ISO/TC 112,9599,,[59372],['en'],15,"<p>ISO/TS 3567:2005 lays down the physical, technical and metrological conditions to be fulfilled when calibrations of vacuum gauges are performed by direct comparison with a reference gauge.</p>"

39213,TS,,ISO/TS 3632-1:2003,Saffron (Crocus sativus L.) — Part 1: Specification,Safran (Crocus sativus L.) — Partie 1: Spécifications,2003-11-11,1,['67.220.10'],ISO/TC 34/SC 7,9599,[9072],[44523],"['en','fr']",8,"<p>ISO/TS 3632-1:2003 sets the specifications for saffron obtained from <i>Crocus sativus </i>L. flowers.</p><p>It is applicable to saffron in both of the following forms: whole and cut filaments as a loose, supple, elastic and hygroscopic mass of filaments; and powder.</p>"

39214,TS,,ISO/TS 3632-2:2003,Saffron (Crocus sativus L.) — Part 2: Test methods,Safran (Crocus sativus L.) — Partie 2: Méthodes d'essai,2003-11-11,1,['67.220.10'],ISO/TC 34/SC 7,9599,[9073],[44526],"['en','fr']",33,"<p>ISO/TS 3632-2:2003 specifies methods for the analysis of saffron obtained from <i>Crocus sativus </i>L. flowers.</p><p>It is applicable to saffron in both of the following forms: whole and cut filaments as a loose, supple, elastic and hygroscopic mass of filaments; and powder.</p>"

40193,TS,,ISO/TS 3669-2:2007,Vacuum technology — Bakable flanges — Part 2: Dimensions of knife-edge flanges,Technique du vide — Brides étuvables — Partie 2: Dimensions des brides à guillotine,2007-08-23,1,['23.160'],ISO/TC 112,9599,,[65135],['en'],7,<p>ISO/TS 3669-2:2007 specifies the dimensions of fixed or rotatable bolted knife-edge style bakable flanges used in vacuum systems for pressures ranging from atmospheric to as low as 10^-13 Pa.</p>

50888,TS,,ISO/TS 3691-8:2012,Industrial trucks — Safety requirements and verification — Part 8: Regional requirements for countries outside the European Community,Chariots de manutention — Exigences de sécurité et vérification — Partie 8: Exigences régionales pour les pays en dehors de la Communauté européenne,2012-05-31,1,['53.060'],ISO/TC 110/SC 2,9599,,[70777],"['en','fr']",8,"<p>ISO/TS 3691-1:2012 gives regional requirements for specific countries outside the European Community (EC) and European Economic Area (EEA) for the types of industrial trucks specified in the scopes of ISO 3691-1, ISO 3691-2, ISO 3691-3, ISO 3691-4 and ISO 3691-6. It is intended to be used in conjunction with each

61057,TS,,ISO/TS 37151:2015,Smart community infrastructures — Principles and requirements for performance metrics,Infrastructures communautaires intelligentes — Principes et exigences pour la métrique des performances,2015-05-07,1,['13.020.20'],ISO/TC 268/SC 1,9599,,[84282],['en'],57,"<p>ISO/TS 37151:2015 gives principles and specifies requirements for the</p><p>· definition,</p><p>· identification,</p><p>· optimization, and</p><p>· harmonization</p><p>of community infrastructure performance metrics, and gives recommendations for analysis, including</p><p>· smartness,</p><p>· interoperability,</p><p>· synergy,</p><p>· resilience

42863,TS,,ISO/TS 3716:2006,Hydrometry — Functional requirements and characteristics of suspended-sediment samplers,Hydrométrie — Spécifications de fonctionnement et caractéristiques des appareils d'échantillonnage pour la détermination des charges sédimentaires en suspension,2006-08-16,1,['17.120.20'],ISO/TC 113/SC 6,9599,[9195],[74196],['en'],11,<p>ISO/TS 3716:2006 specifies the functional requirements and characteristics of the different types of suspended-sediment samplers.</p>

37676,TS,,ISO/TS 4949:2003,Steel names based on letter symbols,Désignations des aciers fondées sur des lettres symboles,2003-06-17,1,['77.080.20'],ISO/TC 17,9599,[10965],[67751],"['en','fr']",8,"<p>ISO/TS 4949:2003 sets out rules for the designation of internationally standardized steel grades by means of symbolic letters and numbers to express application and principal characteristics (e.g. mechanical, physical, chemical) so as to provide an abbreviated identification of steel grades.</p>"

72700,TS,,ISO/TS 55010:2019,Asset management — Guidance on the alignment of financial and non-financial functions in asset management,Gestion d'actifs — Orientation sur l'alignement des fonctions financières et non financières dans la gestion d'actifs,2019-09-19,1,['03.100.01'],ISO/TC 251,9599,,[84051],"['en','es','fr','ru']",40,"<p>This document gives guidelines for the alignment between financial and non-financial asset management functions, in order to improve internal control as part of an organization's management system. Alignment of these functions will enable the realization of value derived from the implementation of asset management detailed within ISO 55000, ISO 55001 and ISO 5500

73529,TS,,ISO/TS 6336-20:2017,Calculation of load capacity of spur and helical gears — Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) — Flash temperature method,Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale — Partie 20: Calcul de la capacité de charge au grippage (applicable également aux engrenages conique et hypoïde) - Méthode de la température-éclair,2017-10-23,1,['21.200'],ISO/TC 60/SC 2,9599,,[84148],"['en','fr']",41,"<p>ISO/TS 6336-20:2017 specifies methods and formulae for evaluating the risk of scuffing, based on Blok's contact temperature concept.</p><p>The fundamental concept is applicable to

73530,TS,,ISO/TS 6336-21:2017,Calculation of load capacity of spur and helical gears — Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) — Integral temperature method,Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale — Partie 21: Calcul de la capacité de charge au grippage (applicable également aux engrenages conique et hypoïde) — Méthode de la température intégrale,2017-12-05,1,['21.200'],ISO/TC 60/SC 2,9599,[23576],[84149],"['en','fr']",49,"<p>ISO/TS 6336-21:2017 specifies the integral temperature method for calculating the scuffing load capacity of cylindrical, bevel and hypoid gears.</p>"