Withdrawn and superseded ISO standards — page 244 of 246

68153,TS,,ISO/TS 20477:2017,Nanotechnologies — Standard terms and their definition for cellulose nanomaterial,Nanotechnologies — Termes normalisés et leur définition pour les nanomatériaux à base de cellulose,2017-08-28,1,"['07.120','01.040.07']",ISO/TC 229,9599,,[83010],"['en','fr']",7,"<p>ISO/TS 20477:2017 defines terms and definitions for different types of cellulose nanomaterials including secondary components found in cellulose nanomaterials due to their manufacturing processes. The document also gives information on cellulose micromaterials in Annex A. </p><p>Where necessary, terms from the ISO/IEC 80004 vocabulary series are included in this document. Terms in this document are appli

35501,TS,,ISO/TS 20646-1:2004,Ergonomic procedures for the improvement of local muscular workloads — Part 1: Guidelines for reducing local muscular workloads,Procédures ergonomiques pour l'amélioration des charges de travail musculaire locales — Partie 1: Lignes directrices pour réduire les charges de travail musculaire,2004-05-21,1,['13.180'],ISO/TC 159/SC 3,9599,,[63231],['en'],17,"<p>ISO/TS 20646-1:2004 provides information and guidelines to properly utilise various ergonomics standards concerning the factors related to local muscular workload (LMWL), and helps develop activities to reduce LMWL in workplaces, in an effective and efficient manner. ISO/TS 20646-1:2004 is intended primarily

68763,TS,,ISO/TS 20658:2017,"Medical laboratories — Requirements for collection, transport, receipt, and handling of samples","Laboratoires de biologie médicale — Exigences pour le prélèvement, le transport, la réception et la manipulation des échantillons",2017-11-02,1,['11.100.01'],ISO/TC 212,9599,,[80035],['en'],34,"<p>ISO/TS 20658:2017 specifies requirements and good practice recommendations for the collection, transport, receipt and handling of samples intended for medical laboratory examinations.</p><p>ISO/TS 20658:2017 is applicable to medical laboratories and other medical services involved in laboratory pre-examination processes that include the examination request, patient preparat

68916,TS,,ISO/TS 20721:2020,Implants for surgery — General guidelines and requirements for assessment of absorbable metallic implants,Implants chirurgicaux — Lignes directrices et exigences générales pour l'évaluation des implants métalliques absorbables,2020-09-15,1,['11.040.40'],ISO/TC 150,9599,,[89265],['en'],14,"<p>This document established the currently recognized approaches and special considerations needed when evaluating the <i>in vitro</i> and <i>in vivo</i> performance of absorbable metals and implants fabricated, in whole or in part, from them. This document describes how the evaluation of these metals can differ from those utilized for permanent non-absorbable implantable implant

69134,TS,,ISO/TS 20793:2019,Photography — Lenticular print for changing images — Measurements of image quality,Photographie — Impression lenticulaire pour images changeantes — Mesurages de la qualité des images,2019-04-01,1,['37.040.10'],ISO/TC 42,9599,,[86669],['en'],22,"<p>This document specifies the measurement methods and specification of image quality of lenticular prints that are used for changing images. This document does not cover lenticular prints that are used for 3D images.</p><p>NOTE Lenticular prints for 3D images can be measured with the same types of procedures. However, it needs more information, such as the dependence of the measurement distance, to evaluate the 3D pe

39759,TS,,ISO/TS 20836:2005,Microbiology of food and animal feeding stuffs — Polymerase chain reaction (PCR) for the detection of food-borne pathogens — Performance testing for thermal cyclers,Microbiologie des aliments — Réaction de polymérisation en chaîne (PCR) pour la recherche de micro-organismes pathogènes dans les aliments — Essais de performance des thermocycleurs,2005-08-19,1,['07.100.30'],ISO/TC 34/SC 9,9599,,"[65686,75434]","['en','fr']",13,"<p>ISO/TS 20836:2005 provides basic requirements for the installation, performance and maintenance of thermal cyclers. Although thermal cyclers are robust technical equipment, they do require regular maintenance. Their cooling/heating elements

35565,TS,,ISO/TS 20885:2003,Gaseous media fire-extinguishing systems — Area coverage fire test procedure — Engineered and pre-engineered extinguishing units,Systèmes d'extinction d'incendie utilisant des agents gazeux — Mode opératoire de couverture de la zone enflammée — Unités extinctrices centralisées et modulaires,2003-06-11,1,['13.220.10'],ISO/TC 21/SC 8,9599,,"[37452,55340]",['en'],21,"<p>ISO/TS 20885:2003 specifies a test method for determination of the extinguishing concentrations and system performance of engineered or pre-engineered extinguishing system units designed to mix and distribute the extinguishant, and to totally flood the enclosure.</p><p>It is designed to allow individu

74109,TS,,ISO/TS 20991:2018,Space systems — Requirements for small spacecraft,Systèmes spatiaux — Exigences relatives aux petits engins spatiaux,2018-07-20,1,['49.140'],ISO/TC 20/SC 14,9599,,[89810],"['en','fr']",6,"<p>This document describes minimum requirements for small spacecraft.</p><p>Small spacecraft may employ untraditional spacecraft development and management philosophy. These spacecraft projects are usually budget-limited or mass-limited, which makes a single (exclusive) launch unaffordable.</p><p>The scope of this document encompasses different categories of small spacecraft — so-called mini-, micro-, nano-, pico- and femto-, as well as CubeSat, spacecraft. Therefore, for the sak

65538,TS,,ISO/TS 210:2014,"Essential oils — General rules for packaging, conditioning and storage","Huiles essentielles — Règles générales d'emballage, de conditionnement et de stockage",2014-05-21,1,['71.100.60'],ISO/TC 54,9599,[4079],[83777],['en'],9,"<p>ISO/TS 210:2014 describes the specifications to be met by the containers intended for containing essential oils, as well as recommendations relating to their conditioning and storage. Essential oils are used for different purposes: food use, pharmaceutical use, perfumery and cosmetic use, reference samples or test samples, and industrial raw materials.</p>"

46528,TS,,ISO/TS 21003-7:2008,Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity,Systèmes de canalisations multicouches pour installations d'eau chaude et froide à l'intérieur des bâtiments — Partie 7: Guide pour l'évaluation de la conformité,2008-06-30,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[63015],"['en','fr','ru']",15,"<p>ISO/TS 21003-7:2008 is applicable, in conjunction with the other parts of ISO 21007, to multilayer piping systems intended to be used for hot and cold water installations inside buildings for the conveyance of water — whether or not the water is intended for human consumption (d

55271,TS,Amd,ISO/TS 21003-7:2008/Amd 1:2010,Multilayer piping systems for hot and cold water installations inside buildings — Part 7: Guidance for the assessment of conformity — Amendment 1,Systèmes de canalisations multicouches pour installations d'eau chaude et froide à l'intérieur des bâtiments — Partie 7: Guide pour l'évaluation de la conformité — Amendement 1,2010-08-11,1,"['23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[63015],"['en','fr','ru']",1,

55810,TS,,ISO/TS 21033:2011,Animal and vegetable fats and oils — Determination of trace elements by inductively coupled plasma optical emission spectroscopy (ICP-OES),Corps gras d'origines animale et végétale — Détermination des éléments traces par spectrométrie d'émission optique à plasma induit par haute fréquence (ICP-OES),2011-03-18,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[66395],"['en','fr','ru']",7,"<p>ISO/TS 21033:2011 specifies an inductively coupled plasma optical emission spectroscopic (ICP-OES) method for the determination of trace element content in oils. Depending on the dilution solvent used, most types of vegetable oils can be analysed (crude, degummed, refined, bleached, deodor

60222,TS,Amd,ISO/TS 21033:2011/Amd 1:2012,Animal and vegetable fats and oils — Determination of trace elements by inductively coupled plasma optical emission spectroscopy (ICP-OES) — Amendment 1,Corps gras d'origines animale et végétale — Détermination des éléments traces par spectrométrie d'émission optique à plasma induit par haute fréquence (ICP-OES) — Amendement 1,2012-07-06,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[66395],"['en','fr','ru']",7,

35647,TS,,ISO/TS 21091:2005,"Health informatics — Directory services for security, communications and identification of professionals and patients","Informatique de santé — Services d'annuaires pour la sécurité, les communications et l'identification des patients et des professionnels",2005-12-13,1,['35.240.80'],ISO/TC 215,9599,,[51432],['en'],47,"<p>ISO/TS 21091:2005 defines minimal specifications for directory services for health care using the X.500 framework. This Technical Specification provides the common directory information and services needed to support the secure exchange of health care information over public networks. ISO/TS 21091:2005 addresses the health directory from a commu

40004,TS,,ISO/TS 21098:2005,"Foodstuffs — Nucleic acid based methods of analysis of genetically modified organisms and derived products — Information to be supplied and procedure for the addition of methods to ISO 21569, ISO 21570 or ISO 21571","Produits alimentaires — Méthodes basées sur les acides nucléiques pour l'analyse des organismes génétiquement modifiés et des produits dérivés — Informations à fournir et procédure pour l'addition de méthodes à l'ISO 21569, l'ISO 21570 ou l'ISO 21571",2005-09-06,1,['67.050'],ISO/TC 34/SC 16,9599,,[53574],['en'],18,"<p>ISO/TS 21098:2005 defines the principles and specifies the nature of the information to be supplied for acceptance of a method as an a

65539,TS,,ISO/TS 211:2014,Essential oils — General rules for labelling and marking of containers,Huiles essentielles — Règles générales d'étiquetage et de marquage des récipients,2014-05-21,1,['71.100.60'],ISO/TC 54,9599,[4081],[83778],['en'],3,<p>ISO/TS 211:2014 specifies the general rules for labelling and marking of containers for essential oils to enable the identification of the contents.</p>

81842,TS,,ISO/TS 21139-22:2023,Permanence and durability of commercial prints — Part 22: Backlit display in indoor or shaded outdoor conditions — Light stability,Permanence et durabilité des impressions commerciales — Partie 22: Écran rétroéclairé en intérieur ou en extérieur ombragé — Stabilité de la lumière,2023-05-05,1,['37.040.20'],ISO/TC 42,9599,,[88354],['en'],27,"<p class='MsoBodyText' style='mso-layout-grid-align: none; text-autospace: none;'><span lang='EN-GB' style='mso-bidi-font-size: 12.0pt;'>This document describes the test methods for light stability measurements of prints on transparent or translucent foils, sheets and paper or printed on a textile, which are displayed on back

70056,TS,,ISO/TS 21177:2019,Intelligent transport systems — ITS station security services for secure session establishment and authentication between trusted devices,Titre manque,2019-08-07,1,"['35.030','35.240.60','03.220.01']",ISO/TC 204,9599,,[81067],['en'],83,"<p>This document contains specifications for a set of ITS station security services required to ensure the authenticity of the source and integrity of information exchanged between trusted entities:</p><p>— devices operated as bounded secured managed entities, i.e. 'ITS Station Communication Units' (ITS-SCU) and 'ITS station units' (ITS-SU) specified in ISO 21217, and</p><p>— between ITS-SUs (composed of one or se

70064,TS,,ISO/TS 21192:2019,Electronic fee collection — Support for traffic management,Perception du télépéage — Aide pour la gestion du trafic,2019-10-01,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[89588],['en'],35,"<p>This document identifies the architecture of a toll system environment in which a toll charger (TC) can act to support traffic management with the use of a tariff scheme.</p><p>The scope of this document defines:</p><p>— the architecture related to the scope;</p><p>— a standard framework and data flow model;</p><p>— an exchange of information between a TC and a road and traffic manager (RTM), e.g.:</p><ul><li>— level of service (LOS);</li><li>— tariff sche

70065,TS,,ISO/TS 21193:2019,Electronic fee collection — Requirements for EFC application interfaces on common media,Perception du télépéage — Exigences relatives aux interfaces d'application de télépéage sur média commun,2019-10-01,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[89587],['en'],40,<p>This document defines requirements to support information exchanges among related entities of a common payment scheme. It defines:</p><p>a) electronic fee collection (EFC) functional requirements for a common payment medium;</p><p>b) an application structure in a common payment medium;</p><p>c) EFC application data in a common payment medium.</p><p>The following are outside the scope of this

63110,TS,,ISO/TS 21219-1:2016,"Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 1: Introduction, numbering and versions (TPEG2-INV)","Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le groupe expert du protocole de transport, génération 2 (TPEG2) — Partie 1: Introduction, numerotage et versions (TPEG2-INV)",2016-05-03,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[79437],['en'],9,"<p>ISO/TS 21219-1:2016 defines an index to the complete set of TPEG Generation 2 toolkit components and applications. New applications are enumerated with an Application Identification (AID) as

63113,TS,,ISO/TS 21219-10:2016,"Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 10: Conditional access information (TPEG2-CAI)","Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le groupe expert du protocole de transport, génération 2 (TPEG2) — Partie 10: Information d'accès conditionnel (TPEG2-CAI)",2016-05-03,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[79439],['en'],7,"<p>ISO/TS 21219-10:2016 defines the TPEG Conditional Access Information (CAI) application. It allows to protect the content of a TPEG service from unauthorized access. It further supports the managemen

63115,TS,,ISO/TS 21219-14:2016,"Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 14: Parking information application (TPEG2-PKI)","Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le groupe expert du protocole de transport, génération 2 (TPEG2) — Partie 14: Informations relatives aux parcs de stationnement (TPEG-PKI)",2016-05-31,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[79851],['en'],50,"<p>ISO/TS 21219-14:2016 specifies the TPEG Parking Information application which has been designed to deliver parking information to a variety of receivers using a number of differen

63116,TS,,ISO/TS 21219-15:2016,"Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 15: Traffic event compact (TPEG2-TEC)","Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le groupe expert du protocole de transport, génération 2 (TPEG2) — Partie 15: Événement trafic compact (TPEG2-TEC)",2016-05-31,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[79852],['en'],63,"<p>ISO/TS 21219-15:2016 specifies the TPEG application: Traffic Event Compact (TEC). The TEC application has been specifically designed to support information about traffic events (e.g. road works, traffic jams). A sp

63117,TS,,ISO/TS 21219-16:2016,"Intelligent transport systems — Traffic and travel information via transport protocol exports group, generation 2 (TPEG2) — Part 16: Fuel price information and availability (TPEG2-FPI)","Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le groupe expert du protocole de transport, génération 2 (TPEG2) — Partie 16: Disponibilité et informations sur le prix du carburant (TPEG2-FPI)",2016-08-31,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[80245],['en'],62,"<p>ISO/TS 21219-16:2016 specifies the TPEG application: Fuel price information and availability (FPI). The FPI application has been specifically designed to support informatio

57463,TS,,ISO/TS 21219-18:2015,"Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 18: Traffic flow and prediction application (TPEG2-TFP)","Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le groupe expert du protocole de transport, génération 2 (TPEG2) — Partie 18: Flux de trafic et application de prédiction (TPEG2-TFP)",2015-03-04,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[76730],['en'],49,"<p>ISO/TS 21219-18:2015 specifies the TPEG application Traffic Flow and Prediction (TFP). It has been specifically designed to provide information to a variety of receivers using d

63118,TS,,ISO/TS 21219-19:2016,"Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 19: Weather information (TPEG2-WEA)","Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le groupe expert du protocole de transport, génération 2 (TPEG2) — Partie 19: Renseignements météorologiques (TPEG2-WEA)",2016-06-16,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[79440],['en'],60,"<p>ISO/TS 21219-19:2016 defines the TPEG Weather (WEA) application for reporting weather information for travellers. It provides general weather-related information to all travellers and is not limited to a specif

57459,TS,,ISO/TS 21219-2:2014,"Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 2: UML modelling rules","Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le groupe expert du protocole de transport, génération 2 (TPEG2) — Partie 2: Règles de modelage UML",2014-09-17,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[76942],['en'],44,<p>ISO/TS 21219-2:2014 specifies rules for the creation and extending of TPEG application UML models. The rules are intended to ensure that TPEG application UML models can be interpreted unambiguously for conversion to physical format representation

63121,TS,,ISO/TS 21219-21:2018,"Intelligent transport systems — Traffic and travel information via transport protocol experts group, generation 2 (TPEG2) — Part 21: Geographic location referencing (TPEG-GLR)","Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le groupe expert du protocole de transport, génération 2 (TPEG2) — Partie 21: Référencement d'emplacement géographique (TPEG2-GLR)",2018-03-21,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[83167],['en'],26,"<p>ISO/TS 21219-21:2018 defines a method of using geographic location referencing (GLR) that can be used by relevant TPEG applications. The GLR type is defined in this document. It is used for defin

69693,TS,,ISO/TS 21219-25:2017,"Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 25: Electromobility charging infrastructure (TPEG2-EMI)","Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le groupe expert du protocole de transport, génération 2 (TPEG2) — Partie 25: Infrastructure pour l'alimentation en électromobilité (TPEG2-EMI)",2017-01-13,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[82948],['en'],61,"<p>ISO/TS 21219-25:2017 defines the TPEG application electromobility charging infrastructure (EMI). It has been specifically designed to support information about chargin

57460,TS,,ISO/TS 21219-3:2015,"Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 3: UML to binary conversion rules","Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le groupe expert du protocole de transport, génération 2 (TPEG2) — Partie 3: Règles de conversion d'UML à système binaire",2015-03-04,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[76726],['en'],14,<p>ISO/TS 21219-3:2015 specifies the rules for converting TPEG application UML models to the TPEG binary format description. It contains the binary format definition of the abstract data types defined in ISO/TS 21219

59713,TS,,ISO/TS 21219-4:2015,"Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 4: UML to XML conversion rules","Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le groupe expert du protocole de transport, génération 2 (TPEG2) — Partie 4: Règles de conversion d'UML en XML",2015-03-04,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[76727],['en'],37,<p>ISO/TS 21219-4:2015 specifies the rules for converting TPEG application UML models to the tpegML format description. It contains the XML format definition of the abstract data types defined in TISA Specification SP09003. Rules

57461,TS,,ISO/TS 21219-5:2015,"Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 5: Service framework (TPEG2-SFW)","Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le groupe expert du protocole de transport, génération 2 (TPEG2) — Partie 5: Cadre de service (TPEG2-SFW)",2015-03-04,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[76728],['en'],37,"<p>ISO/TS 21219-5:2015 establishes a method of conveying data for a wide range of applications that require the efficient transmission of point to multi-point data over potentially unreliable broadcast channels. It is also suitable

57462,TS,,ISO/TS 21219-6:2015,"Intelligent transport systems - Traffic and travel information(TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 6: Message management container (TPEG2-MMC)","Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le groupe expert du protocole de transport, génération 2 (TPEG2) — Partie 6: Conteneur de gestion de message (TPEG2-MMC)",2015-03-04,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[76729],['en'],18,"<p>ISO/TS 21219-6:2015 adds a basic toolkit definition to the ISO 21219 series specifying the Message Management Container (MMC), which is used by all TPEG applications to provide information about the handl

63111,TS,,ISO/TS 21219-7:2017,"Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 7: Location referencing container (TPEG2-LRC)","Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le groupe expert du protocole de transport, génération 2 (TPEG2) — Partie 7: Conteneur de référencement d'emplacement (TPEG2-LRC)",2017-06-14,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[82949],['en'],13,<p>ISO/TS 21219-7:2017 establishes the method of signalling the specific location referencing used by all TPEG2 applications that require detailed location information to be delivered to client de

63112,TS,,ISO/TS 21219-9:2016,"Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 9: Service and network information (TPEG2-SNI)","Systèmes intelligents de transport — Informations sur le trafic et le tourisme via le groupe expert du protocole de transport, génération 2 (TPEG2) — Partie 9: Information de service et de reseau (TPEG2-SNI)",2016-03-29,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[79438],['en'],62,"<p>ISO/TS 21219-9:2016 establishes the method of delivering service and network information within a TPEG service. The TPEG-SNI application is designed to allow the efficient and language independent

54069,TS,,ISO/TS 21220:2009,Particulate air filters for general ventilation — Determination of filtration performance,Filtres à air particulaires pour ventilation générale — Détermination des performances de filtration,2009-09-22,1,['13.040.20'],ISO/TC 142,9599,[40070],"[57865,57866,57867,57864]",['en'],54,"<p>ISO/TS 21220:2009 presents test methods and specifies a test rig for measuring the filter performance of particulate air filters used for general ventilation. The test rig is designed for an air flow rate of between 0,25 m³/s [900 m³/h (530 ft³/min)] and 1,5 m³/s [5 400 m³/h (3 178 ft³/min)]. </p><p>ISO/TS 21

44145,TS,,ISO/TS 21268-1:2007,Soil quality — Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials — Part 1: Batch test using a liquid to solid ratio of 2 l/kg dry matter,Qualité du sol — Modes opératoires de lixiviation en vue d'essais chimiques et écotoxicologiques ultérieurs des sols et matériaux du sol — Partie 1: Essai en bâchée avec un rapport liquide/solide de 2 l/kg de matière sèche,2007-07-10,1,['13.080.05'],ISO/TC 190/SC 7,9599,,[68250],"['en','fr']",15,"<p>ISO/TS 21268-1:2007 specifies a test providing information on leaching of soil and soil materials under the experimental conditions specified hereafter, and particularly at a liquid

44146,TS,,ISO/TS 21268-2:2007,Soil quality — Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials — Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter,Qualité du sol — Modes opératoires de lixiviation en vue d'essais chimiques et écotoxicologiques ultérieurs des sols et matériaux du sol — Partie 2: Essai en bâchée avec un rapport liquide/solide de 10 l/kg de matière sèche,2007-07-10,1,['13.080.05'],ISO/TC 190/SC 7,9599,,[68251],"['en','fr']",15,"<p>ISO/TS 21268-2:2007 specifies a test providing information on leaching of soil and soil materials under the experimental conditions specified hereafter, and particularly at a liqui

44147,TS,,ISO/TS 21268-3:2007,Soil quality — Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials — Part 3: Up-flow percolation test,Qualité du sol — Modes opératoires de lixiviation en vue d'essais chimiques et écotoxicologiques ultérieurs des sols et matériaux du sol — Partie 3: Essai de percolation à écoulement ascendant,2007-07-10,1,['13.080.05'],ISO/TC 190/SC 7,9599,,[68252],"['en','fr']",18,"<p>ISO/TS 21268-3:2007 specifies a test, which is aimed at determining the leaching behaviour of inorganic and organic constituents from a soil and soil material. The method is a once-through percolation test with water (0,001 mol/l CaCl₂)<s

39105,TS,,ISO/TS 21268-4:2007,Soil quality — Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials — Part 4: Influence of pH on leaching with initial acid/base addition,Qualité du sol — Modes opératoires de lixiviation en vue d'essais chimiques et écotoxicologiques ultérieurs des sols et matériaux du sol — Partie 4: Essai de dépendance au pH avec ajout initial d'acide/base,2007-11-15,1,['13.080.05'],ISO/TC 190/SC 7,9599,,[68730],"['en','fr']",23,"<p>ISO/TS 21268-4:2007 specifies a test method to obtain information on the short- and long-term leaching behaviour and characteristic properties of materials. It applies to the determination of the infl

40133,TS,,ISO/TS 21298:2008,Health informatics — Functional and structural roles,Informatique de santé — Rôles fonctionnels et structurels,2008-11-17,1,['35.240.80'],ISO/TC 215,9599,,[63514],"['en','fr']",28,"<p>ISO/TS 21298:2008 defines a model for expressing functional and structural roles and populates it with a basic set of roles for international use in health applications. Roles are generally assigned to entities that are actors. This will focus on roles of persons (e.g. the roles of health professionals) and their roles in the context of the provision of care (e.g. subject of care).</p><p>Roles addressed in ISO/TS 21298:2008 are not restricted to privilege management purposes, though

70514,TS,,ISO/TS 21310:2020,Traditional Chinese medicine — Microscopic examination of medicinal herbs,Médecine traditionnelle chinoise — Examen microscopique des herbes médicinales,2020-07-15,1,['11.120.10'],ISO/TC 249/SC 1,9599,,[89767],['en'],10,"<p>This document specifies the methods for microscopic examination of medicinal herbs. It covers the equipment, sampling, preparation and observation methods. This document is applicable to medicinal herbs used in traditional Chinese medicine, including Chinese materia medica (whole medicinal materials) and decoction pieces derived from plants. It is not applicable to medicinal materials derived from animals or minerals.</p>"

70760,TS,,ISO/TS 21361:2019,Nanotechnologies — Method to quantify air concentrations of carbon black and amorphous silica in the nanoparticle size range in a mixed dust manufacturing environment,Nanotechnologies — Méthode de quantification des concentrations dans l'air de noir de carbone et de silice amorphe à l'échelle nanométrique dans un environnement de fabrication industrielle contenant des mélanges de poussières,2019-04-23,1,['07.120'],ISO/TC 229,9599,,[86097],"['en','fr']",13,"<p>This document provides guidelines to quantify and identify air concentration (number of particles/cm³) of particles of carbon black and/or amorphous silica by size in air samples collected in a mix

70761,TS,,ISO/TS 21362:2018,Nanotechnologies — Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation,Nanotechnologies — Analyse des nano-objets par fractionnement par couplage flux-force asymétrique et à force centrifuge,2018-05-30,1,['07.120'],ISO/TC 229,9599,,[78427],"['en','fr']",38,"<p>This document identifies parameters and conditions, as part of an integrated measurement system, necessary to develop and validate methods for the application of asymmetrical-flow and centrifugal field-flow fractionation to the analysis of nano-objects and their aggregates and agglomerates dispersed in aqueous media. In addition to constituent fractionation, analysis can

70769,TS,,ISO/TS 21364-1:2021,Domestic gas cooking appliances — Safety — Part 1: General requirements,Appareils de cuisson domestiques utilisant les combustibles gazeux — Sécurité — Partie 1: Exigences générales,2021-05-21,1,['97.040.20'],ISO/TC 291,9599,,[84187],"['en','fr']",79,"<p>This document specifies the safety requirements for domestic gas cooking appliances. These appliances are freestanding, built-in or table-top and are intended to be used indoors. This document applies to the gas sections of the appliances and their component parts (e.g. combined gas-electric cooking appliances). This document does not apply to:</p><p>a) electrical heated elements as part of the appliance;</p><p>

74492,TS,,ISO/TS 21364-21:2021,"Domestic gas cooking appliances — Safety — Part 21: Particular requirements for gas hobs, gas grills and gas griddles","Appareils de cuisson domestiques utilisant les combustibles gazeux — Sécurité — Partie 21: Exigences particulières pour les tables de cuisson à gaz, grils à gaz et grils par contact à gaz",2021-05-21,1,['97.040.20'],ISO/TC 291,9599,,[84188],"['en','fr']",24,"<p>This document specifies particular requirements for safety, construction and materials of household gas surface cooking appliances. For general requirements for safety, construction and materials of gas hobs, see ISO/TS 21364-1:2021.</p><p>This document covers the following:</p><p>—

75964,TS,,ISO/TS 21364-22:2021,Domestic gas cooking appliances — Safety — Part 22: Particular requirements for ovens and compartment grills,Appareils de cuisson domestiques utilisant les combustibles gazeux — Sécurité — Partie 22: Exigences particulières pour les fours et compartiments de grillage,2021-05-21,1,['97.040.20'],ISO/TC 291,9599,,[84189],"['en','fr']",32,"<p>This document specifies particular requirements for safety, construction and materials of domestic gas ovens and compartment grills. For general requirements for safety, construction and materials of gas ovens and compartment grills, ISO/TS 21364-1:2021 applies.</p><p>This document covers the following gas cooking appliances:<

35868,TS,,ISO/TS 21432:2005,Non-destructive testing — Standard test method for determining residual stresses by neutron diffraction,Essais non destructifs — Méthode normalisée de détermination des contraintes résiduelles par diffraction de neutrons,2005-07-28,1,['19.100'],ISO/TC 135/SC 5,9599,,"[75266,65097]","['en','fr']",40,<p>ISO/TS 21432:2005 gives the standard test method for determining residual stresses in polycrystalline materials by neutron diffraction. It is applicable to homogeneous and inhomogeneous materials and to test pieces containing distinct phases.</p>

50983,TS,Cor,ISO/TS 21432:2005/Cor 1:2008,Non-destructive testing — Standard test method for determining residual stresses by neutron diffraction — Technical Corrigendum 1,Essais non destructifs — Méthode normalisée de détermination des contraintes résiduelles par diffraction de neutrons — Rectificatif technique 1,2008-01-21,1,['19.100'],ISO/TC 135/SC 5,9599,,"[75266,65097]",['en'],2,

71088,TS,,ISO/TS 21564:2019,Health Informatics — Terminology resource map quality measures (MapQual),Titre manque,2019-06-18,1,['35.240.80'],ISO/TC 215,9599,,[86417],['en'],25,<p>This document provides quality requirements for producing a quality map between terminological systems. </p><p>This document establishes measures which can be used to assess the quality and utility of a map between terminological resources in order to determine the types and levels of measure required for common use cases in healthcare.</p><p>NOTE Examples of such cases include conformity assessment.</p>

60166,TS,,ISO/TS 21569-2:2012,Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 2: Construct-specific real-time PCR method for detection of event FP967 in linseed and linseed products,Méthodes horizontales d'analyse moléculaire de biomarqueurs — Méthodes d'analyse pour la détection des organismes génétiquement modifiés et des produits dérivés — Partie 2: Méthode PCR en temps réel spécifique de la construction pour la détection d'un évènement FP967 dans les graines de lin et les produits à base de graines de lin,2012-09-03,1,['67.050'],ISO/TC 34/SC 16,9599,,[80843],"['en','ru']",9,"<p>This

63468,TS,,ISO/TS 21569-3:2015,Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 3: Construct-specific real-time PCR method for detection of P35S-pat-sequence for screening genetically modified organisms,Méthodes horizontales d'analyse moléculaire de biomarqueurs — Méthodes d'analyse pour la détection des organismes génétiquement modifiés et des produits dérivés — Partie 3: Méthode PCR en temps réel construit-spécifique pour la détection de la séquence P35S-pat pour criblage des organismes génétiquement modifiés,2015-01-07,1,['67.050'],ISO/TC 34/SC 16,9599,,[76530],"['en','fr']",9,<p>ISO/TS

69356,TS,,ISO/TS 21569-6:2016,Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 6: Real-time PCR based screening methods for the detection of cry1Ab/Ac and Pubi-cry DNA sequences,Méthodes horizontales d'analyse moléculaire de biomarqueurs — Méthodes d'analyse pour la détection des organismes génétiquement modifiés et des produits dérivés — Partie 6: Méthodes de criblage par PCR en temps réel pour la détection des séquences ADN cry1Ab/Ac et Pubi-cry,2016-11-02,1,['67.050'],ISO/TC 34/SC 16,9599,,[89283],"['en','fr']",10,<p>ISO/TS 21569-6:2016 specifies a procedure for the detection of a DNA

35949,TS,,ISO/TS 21609:2003,Road vehicles — (EMC) guidelines for installation of aftermarket radio frequency transmitting equipment,Véhicules routiers — Guide sur la compatibilité électromagnétique (CEM) pour l'installation en seconde monte d'équipements radio-téléphone,2003-10-20,1,"['33.100.01','43.040.10']",ISO/TC 22,9599,,[62793],['en'],11,"<p>ISO 21609:2003 gives requirements and recommendations for the installation in road vehicles of radio frequency transmitting and receiving equipment, 'in-road-vehicle' mounting kits for transportable and handheld RF equipment, and ancillary equipment associated with these. As well as methods for installation, it establishes methods for minimizing th

34641,TS,,ISO/TS 21667:2004,Health informatics — Health indicators conceptual framework,Informatique de santé — Cadre conceptuel d'indicateurs de santé,2004-04-01,1,['35.240.80'],ISO/TC 215,9599,,[55193],['en'],20,"<p>ISO/TS 21667:2004 establishes a common health indicators conceptual framework for the field of health informatics. It is intended to foster a common vocabulary and conceptual definitions for a framework which defines the appropriate dimensions and subdimensions required to describe the health of the population and performance of a health care system, which is sufficiently broad (high-level) to accommodate a variety of health care systems, and which is comprehensive, encapsulati

71476,TS,,ISO/TS 21719-1:2018,Electronic fee collection — Personalization of on-board equipment (OBE) — Part 1: Framework,Perception de télépéage — Personnalisation des équipements embarqués — Partie 1: Cadre,2018-01-25,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[90871],['en'],9,<p>ISO/TS 21719-1:2018 describes:</p><p>- an overall description of the EFC personalization process;</p><p>- a description of EFC functionality that can be used for personalization.</p><p>The personalization process takes place within the domain of the entity that is responsible for the application in the OBE.</p>

71477,TS,,ISO/TS 21719-2:2018,Electronic fee collection — Personalization of on-board equipment (OBE) — Part 2: Using dedicated short-range communication,Perception de télépéage — Personnalisation des équipements embarqués — Partie 2: Utilisation des communications dédiées à courte portée,2018-01-25,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[84087],['en'],39,"<p>ISO/TS 21719-2:2018 specifies</p><p>- personalization interface: dedicated short-range communication (DSRC),</p><p>- physical systems: on-board equipment and the personalization equipment,</p><p>- DSRC-link requirements,</p><p>- EFC personalization functions according to ISO/TS 21719-1 when defined for the DS

34686,TS,,ISO/TS 21748:2004,"Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation","Lignes directrices relatives à l'utilisation d'estimations de la répétabilité, de la reproductibilité et de la justesse dans l'évaluation de l'incertitude de mesure",2004-03-26,1,['17.020'],ISO/TC 69/SC 6,9599,,[46373],"['en','fr']",30,"<p>TS 21748:2004 gives guidance for the evaluation of measurement uncertainties using data obtained from studies conducted in accordance with ISO 5725-2, and for the comparison of collaborative study results with measurement uncertainty obtained using formal principles of uncertainty propagation. TS 21748:2003 is a

71716,TS,,ISO/TS 21805:2018,"Guidance on design, selection and installation of vents to safeguard the structural integrity of enclosures protected by gaseous fire-extinguishing systems","Lignes directrices pour la conception, la sélection et l'installation d'évents pour préserver l'intégrité structurelle des enceintes protégées par des systèmes fixes de lutte contre l'incendie à gaz",2018-12-18,1,"['91.140.30','13.220.10']",ISO/TC 21/SC 8,9599,,[79443],['en'],30,"<p>This document provides guidance on fulfilling the requirements contained in ISO 6183:2009, 6.4.1 and 7.4.1 and ISO 14520-1:2015, 5.2.1 h and 5.3 h, in respect to over and under pressurisation venting and post discharge extract.</

71894,TS,,ISO/TS 21826:2020,Iron ores — Determination of total iron content — EDTA photometric titration method,Minerais de fer — Dosage du fer total — Méthode titrimétrique photométrique à l'EDTA,2020-03-09,1,['73.060.10'],ISO/TC 102/SC 2,9599,,[83877],['en'],26,"<p>This document specifies a photometric titration method using EDTA for the determination of the total iron content of iron ores. </p><p>This method is applicable to a concentration range of a mass fraction of 37,00 % to 72,00 % of total iron in natural iron ores, iron ore concentrates and agglomerates, including sinter products.</p>"

36004,TS,,ISO/TS 21849:2003,Aircraft — Integrated data processing materials management — Bar coding,Aéronefs — Gestion des matériels par traitement informatisé de données intégrées — Codes à barres,2003-09-12,1,"['35.240.60','49.020']",ISO/TC 20,9599,,[38162],['en'],15,<p>ISO/TS 21849:2003 establishes the requirements for receipts and permanent bar code identification in the field of integrated data processing management for aircrafts.</p>

81179,TS,,ISO/TS 21868:2021,Textile floor coverings — State of the art and guidance on maintenance and cleaning,Revêtements de sol textiles — Etat de l'art et recommandations relatives à l'entretien et au nettoyage,2021-06-24,1,['97.150'],ISO/TC 219,9599,,[84821],['en'],14,"<p>This document specifies guidelines for the development of specific textile floor covering maintenance and cleaning standards, procedures and criteria to reflect locally specific conditions. This document specifies the factors which are likely to impact the final results of textile floor covering cleaning, defining maintenance and cleaning terms to highlight differences. It establishes low-cost, non-residue and environm

38278,TS,,ISO/TS 21872-1:2007,Microbiology of food and animal feeding stuffs — Horizontal method for the detection of potentially enteropathogenic Vibrio spp. — Part 1: Detection of Vibrio parahaemolyticus and Vibrio cholerae,Microbiologie des aliments — Méthode horizontale pour la recherche des Vibrio spp. potentiellement entéropathogènes — Partie 1: Recherche de Vibrio parahaemolyticus et Vibrio cholerae,2007-04-17,1,['07.100.30'],ISO/TC 34/SC 9,9599,,"[65687,74112]","['en','fr']",19,"<p>ISO/TS 21872-1:2007 specifies a horizontal method for the detection of the two main pathogenic <i>Vibrio</i> species causing intestinal illness in humans: <i>V. parahaemolyticus </i>and <i>V. cholerae.</i>

51173,TS,Cor,ISO/TS 21872-1:2007/Cor 1:2008,Microbiology of food and animal feeding stuffs — Horizontal method for the detection of potentially enteropathogenic Vibrio spp. — Part 1: Detection of Vibrio parahaemolyticus and Vibrio cholerae — Technical Corrigendum 1,Microbiologie des aliments — Méthode horizontale pour la recherche des Vibrio spp. potentiellement entéropathogènes — Partie 1: Recherche de Vibrio parahaemolyticus et Vibrio cholerae — Rectificatif technique 1,2008-02-20,1,['07.100.30'],ISO/TC 34/SC 9,9599,,"[65687,74112]","['en','fr']",1,

38279,TS,,ISO/TS 21872-2:2007,Microbiology of food and animal feeding stuffs — Horizontal method for the detection of potentially enteropathogenic Vibrio spp. — Part 2: Detection of species other than Vibrio parahaemolyticus and Vibrio cholerae,Microbiologie des aliments — Méthode horizontale pour la recherche des Vibrio spp. potentiellement entéropathogènes — Partie 2: Recherche des espèces autres que Vibrio parahaemolyticus et Vibrio cholerae,2007-04-17,1,['07.100.30'],ISO/TC 34/SC 9,9599,,"[65687,74112]","['en','fr']",24,"<p>ISO/TS 21872-2:2007 specifies a horizontal method for detection of the enteropathogenic <i>Vibrio </i>species, causing illness in or via the intestinal tract, other t

40436,TS,,ISO/TS 21929-1:2006,Sustainability in building construction — Sustainability indicators — Part 1: Framework for development of indicators for buildings,Développement durable dans la construction — Indicateurs de développement durable — Partie 1: Cadre pour le développement d'indicateurs pour le bâtiment,2006-03-09,1,['91.040.01'],ISO/TC 59/SC 17,9599,,[46599],"['en','fr']",16,"<p>ISO/TS 21929-1:2006 provides a framework, makes recommendations, and gives guidelines for the development and selection of appropriate sustainability indicators for buildings.</p><p>The aim of this part of ISO/TS 21929-1:2006 is to define the process that shall be followed when addressing the economic, env

64987,TS,,ISO/TS 21929-2:2015,Sustainability in building construction — Sustainability indicators — Part 2: Framework for the development of indicators for civil engineering works,Développement durable dans la construction — Indicateurs de développement durable — Partie 2: Cadre pour le développement d'indicateurs pour les ouvrages de génie civil,2015-03-03,1,['91.040.01'],ISO/TC 59/SC 17,9599,,"[79802,69971]",['en'],33,"<p>ISO/TS 21929-2:2015 establishes a list of aspects and impacts which should be taken as the basis for the development of sustainability indicators for assessing the sustainability performance of new or existing civil engineering works, related to their design, construction

40434,TS,,ISO/TS 21931-1:2006,Sustainability in building construction — Framework for methods of assessment for environmental performance of construction works — Part 1: Buildings,Développement durable dans la construction — Cadre méthodologique pour l'évaluation de la performance environnementale des ouvrages — Partie 1: Bâtiments,2006-03-09,1,['91.040.01'],ISO/TC 59/SC 17,9599,,[45559],['en'],19,"<p>ISO/TS 21931:2006 provides a general framework for improving the quality and comparability of methods for assessing the environmental performance of buildings. It identifies and describes issues to be taken into account when using methods for the assessment of environmental performance for new

44001,TS,,ISO/TS 22002-1:2009,Prerequisite programmes on food safety — Part 1: Food manufacturing,Programmes prérequis pour la sécurité des denrées alimentaires — Partie 1: Fabrication des denrées alimentaires,2009-12-14,1,['67.020'],ISO/TC 34/SC 17,9599,,[83539],"['en','fr','ru']",19,"<p>ISO/TS 22002-1:2009 specifies requirements for establishing, implementing and maintaining prerequisite programmes (PRP) to assist in controlling food safety hazards.</p><p>ISO/TS 22002-1:2009 is applicable to all organizations, regardless of size or complexity, which are involved in the manufacturing step of the food chain and wish to implement PRP in such a way as to address the requirements specified in I

53493,TS,,ISO/TS 22002-2:2013,Prerequisite programmes on food safety — Part 2: Catering,Programmes prérequis pour la sécurité des denrées alimentaires — Partie 2: Restauration,2013-01-17,1,['67.040'],ISO/TC 34/SC 17,9599,,[83540],"['en','fr','ru']",18,"<p>ISO/TS 22002-2:2013 specifies the requirements for the design, implementation, and maintenance of prerequisite programmes (PRPs) to assist in controlling food safety hazards in catering.</p><p>ISO/TS 22002-2:2013 is applicable to all organizations which are involved in the processing, preparation, distribution, transport, and serving of food and meals and wish to implement PRPs in accordance with the requirements specified in ISO 22000:2005

60969,TS,,ISO/TS 22002-4:2013,Prerequisite programmes on food safety — Part 4: Food packaging manufacturing,Programmes prérequis pour la sécurité des denrées alimentaires — Partie 4: Fabrication des emballages destinés aux denrées alimentaires,2013-12-12,1,['67.040'],ISO/TC 34/SC 17,9599,,[83542],"['en','fr','ru']",17,"<p>ISO/TS 22002‑4:2013 specifies requirements for establishing, implementing and maintaining prerequisite programmes (PRPs) to assist in controlling food safety hazards in the manufacture of food packaging.</p><p>This Technical Specification is applicable to all organizations, regardless of size or complexities that manufacture food packaging and/or intermediate products. </p>

73101,TS,,ISO/TS 22002-5:2019,Prerequisite programmes on food safety — Part 5: Transport and storage,Programmes prérequis pour la sécurité des denrées alimentaires — Partie 5: Transport et stockage,2019-09-30,1,['67.020'],ISO/TC 34/SC 17,9599,,[83543],"['en','fr']",15,"<p>This document specifies requirements for establishing, implementing and maintaining prerequisite programmes (PRPs) for transport and storage in the food chain to assist in controlling food safety hazards.</p><p>This document is applicable to all organizations, regardless of size or complexity, that are involved in transport and storage activities across the food supply chain and that wish to implement PRPs in such a way as

66126,TS,,ISO/TS 22002-6:2016,Prerequisite programmes on food safety — Part 6: Feed and animal food production,Programmes prérequis pour la sécurité des denrées alimentaires — Partie 6: Production des aliments pour animaux,2016-04-14,1,['67.040'],ISO/TC 34/SC 17,9599,,[83544],"['en','fr','ru']",13,"<p>ISO/TS 22002-6:2016 specifies requirements for establishing, implementing and maintaining prerequisite programmes (PRPs) to assist in controlling feed safety hazards in feed and animal food and in materials intended for use in the production of feed and animal food. Feed safety hazards in this context relate to attributes that have a potential to affect adversely animal and/or human health.</p>

39834,TS,,ISO/TS 22003:2007,Food safety management systems — Requirements for bodies providing audit and certification of food safety management systems,Systèmes de management de la sécurité des denrées alimentaires — Exigences pour les organismes procédant à l'audit et à la certification de systèmes de management de la sécurité des denrées alimentaires,2007-02-14,1,"['03.100.70','03.120.20','67.020']",ISO/TC 34/SC 17,9599,,[60605],"['en','fr','ru']",16,"<p>ISO/TS 22003:2007 defines the rules applicable for the audit and certification of a food safety management system (FSMS) complying with the requirements given in ISO 22000:2005 (or other sets of specified FSMS requirements), and provides

60605,TS,,ISO/TS 22003:2013,Food safety management systems — Requirements for bodies providing audit and certification of food safety management systems,Systèmes de management de la sécurité des denrées alimentaires — Exigences pour les organismes procédant à l'audit et à la certification de systèmes de management de la sécurité des denrées alimentaires,2013-12-12,2,"['03.120.20','67.020']",ISO/TC 34/SC 17,9599,[39834],[74410],"['en','fr','ru']",26,<p>ISO/TS 22003:2013 defines the rules applicable for the audit and certification of a food safety management system (FSMS) complying with the requirements given in ISO 22000 (or other sets of specified FSMS requirements). It also provides the nec

39835,TS,,ISO/TS 22004:2005,Food safety management systems — Guidance on the application of ISO 22000:2005,Systèmes de management de la sécurité des denrées alimentaires — Recommendations pour l'application de l'ISO 22000:2005,2005-11-10,1,"['03.100.70','67.020']",ISO/TC 34/SC 17,9599,,[60992],"['en','fr','ru']",13,<p>ISO/TS 22004:2005 provides generic guidance that can be applied in the use of ISO 22000.</p>

39747,TS,,ISO/TS 22028-2:2006,"Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and interchange — Part 2: Reference output medium metric RGB colour image encoding (ROMM RGB)","Photographie et technologie graphique — Codages par couleurs étendues pour stockage, manipulation et échange d'image numérique — Partie 2: Codage d'image en couleurs RVB par référence de sortie par voie métrique",2006-08-16,1,"['37.040.99','37.100.01']",ISO/TC 42,9599,,[56591],['en'],17,"<p>ISO/TS 22028-2:2006 defines a family of extended colour-gamut output-referred RGB colour image encodings designated as reference output medium metric RGB (ROMM RGB). Digital imag

39748,TS,,ISO/TS 22028-3:2006,"Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and interchange — Part 3: Reference input medium metric RGB colour image encoding (RIMM RGB)","Photographie et technologie graphique — Codages par couleurs étendues pour stockage, manipulation et échange d'image numérique — Partie 3: Codage d'image en couleurs RVB par référence d'entrée par voie métrique",2006-08-29,1,"['37.040.99','37.100.01']",ISO/TC 42,9599,,[58005],['en'],18,"<p>ISO/TS 22028-3:2006 specifies a family of extended-colour-gamut scene-referred RGB colour image encodings designated as reference input medium metric RGB (RIMM RGB). Digital images

58005,TS,,ISO/TS 22028-3:2012,"Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and interchange — Part 3: Reference input medium metric RGB colour image encoding (RIMM RGB)","Photographie et technologie graphique — Codages par couleurs étendues pour stockage, manipulation et échange d'image numérique — Partie 3: Codage d'image en couleurs RVB par référence d'entrée par voie métrique",2012-07-24,2,"['37.040.99','37.100.01']",ISO/TC 42,9599,[39748],[83567],['en'],19,"<p>ISO 22028-3:2012 specifies a family of scene-referred extended colour gamut RGB colour image encodings designated as reference input medium metric RGB (RIMM RGB). Digital im

54745,TS,,ISO/TS 22028-4:2012,"Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and interchange — Part 4: European Colour Initiative RGB colour image encoding [eciRGB (2008)]","Photographie et technologie graphique — Codages par couleurs étendues pour stockage, manipulation et échange d'image numérique — Partie 4: Codage d'image en couleurs RGB par initiative de couleur européenne [eciRGB(2008)]",2012-10-19,1,"['37.040.99','37.100.01']",ISO/TC 42,9599,,[83569],['en'],17,"<p>ISO/TS 22028-4:2012 defines an extended colour-gamut output-referred RGB colour image encoding designated as European Colour Initiative RGB [eciRGB (2008)]. Digital im

81863,TS,,ISO/TS 22028-5:2023,"Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and interchange — Part 5: High dynamic range and wide colour gamut encoding for still images (HDR/WCG)","Photographie et technologie graphique — Codages par couleurs étendues pour stockage, manipulation et échange d'image numérique — Partie 5: Plage dynamique élevée et codage large de la gamme de couleurs pour les images fixes (HDR/WCG)",2023-06-20,1,"['37.040.99','37.100.01']",ISO/TC 42,9599,,[87778],['en'],21,"<p class='MsoBodyText' style='mso-layout-grid-align: none; text-autospace: none;'><span lang='EN-GB' style='mso-bidi-font-size: 12.0pt; mso-fareast-fo

64551,TS,,ISO/TS 22077-2:2015,Health informatics — Medical waveform format — Part 2: Electrocardiography,Informatique de santé — Forme d'onde médicale — Partie 2: Electrocardiographie,2015-08-14,1,['35.240.80'],ISO/TC 215,9599,,[82634],['en'],38,"<p>ISO/TS 22077-2:2015 defines the application of medical waveform format encoding rules (MFER) to describe standard electrocardiogram waveforms measured in physiological laboratories, hospital wards, clinics, and primary care medical checkups. It covers electrocardiograms such as 12-lead, 15-lead, 18-lead, Cabrera lead, Nehb lead, Frank lead, XYZ lead, and exercise tests that are measured by inspection equipment such as electrocardiographs and pati

64552,TS,,ISO/TS 22077-3:2015,Health informatics — Medical waveform format — Part 3: Long term electrocardiography,Informatique de santé — Forme d'onde médicale — Partie 3: Électrocardiographie de longue durée,2015-07-28,1,['35.240.80'],ISO/TC 215,9599,,[82635],['en'],29,"<p>ISO/TS 22077-3:2015 defines the application of medical waveform format encoding rules (MFER) to describe long-term electrocardiogram waveforms measured in physiological laboratories and health care clinics. It covers electrocardiograms such as bipolar 2, 3-lead, 12-lead that are measured by medical equipment such as Holter electrocardiograph and patient physiological monitors that are compatible with the medical waveform

40720,TS,,ISO/TS 22117:2010,Microbiology of food and animal feeding stuffs — Specific requirements and guidance for proficiency testing by interlaboratory comparison,Microbiologie des aliments — Exigences spécifiques et lignes directrices pour les essais d'aptitude par comparaison interlaboratoires,2010-10-25,1,['07.100.30'],ISO/TC 34/SC 9,9599,,[67052],"['en','fr','ru']",28,"<p>ISO/TS 22117:2010 gives requirements and guidance for the organization of proficiency testing schemes for microbiological examinations of: a) food and beverages; b) animal feeding stuffs; c) food production environments and food handling; d) primary production stages.</p><p>ISO/TS 22117:2010 is also potentially appli

78970,TS,,ISO/TS 22133:2023,"Road vehicles — Test object monitoring and control for active safety and automated/autonomous vehicle testing — Functional requirements, specifications and communication protocol","Véhicules routiers — Surveillance et contrôle des objets de test pour l’évaluation de la sécurité active et des véhicules automatisés/autonomes — Exigences fonctionnelles, caractéristiques et protocole de communication",2023-03-30,1,['43.020'],ISO/TC 22/SC 33,9599,,[88112],['en'],102,"<p class='MsoNormal'><span lang='EN-GB'>This document specifies requirements, procedures and message formats for controlling and monitoring of test targets, used for testing of active safety functions and

72712,TS,,ISO/TS 22163:2017,Railway applications — Quality management system — Business management system requirements for rail organizations: ISO 9001:2015 and particular requirements for application in the rail sector,Applications ferroviaires — Système de management de la qualité — Exigences liées au système de management de l'activité à destination des organismes ferroviaires: ISO 9001:2015 et exigences particulières concernant les applications dans le secteur ferroviaire,2017-05-23,1,"['03.100.70','45.020']",ISO/TC 269,9599,,[79427],"['en','fr']",69,"<p>ISO/TS 22163:2017 specifies requirements for a quality management system when an organization:</p><p>a) needs to demonstrate its ab

40782,TS,,ISO/TS 22220:2009,Health Informatics — Identification of subjects of health care,Informatique de santé — Identification des sujets de soins sanitaires,2009-03-11,1,['35.240.80'],ISO/TC 215,9599,,[59755],['en'],90,"<p>ISO/TS 22220:2009 indicates the data elements and structure suited to accurate and procedurally appropriate and sensitive identification of individuals in health care in a face-to-face setting supported by computer technology, or through interactions between computer systems. It provides guidelines for improving the positive identification of subjects of care within and between health care organizations.</p><p>ISO/TS 22220:2009 defines demographic and other identifying

59755,TS,,ISO/TS 22220:2011,Health informatics — Identification of subjects of health care,Informatique de santé — Identification des sujets de soins sanitaires,2011-12-13,2,['35.240.80'],ISO/TC 215,9599,[40782],[84641],"['en','fr']",88,"<p>ISO/TS 22220:2011 indicates the data elements and structure suited to accurate and procedurally appropriate and sensitive identification of individuals in health care in a face-to-face setting supported by computer technology, or through interactions between computer systems. It provides guidelines for improving the positive identification of subjects of care within and between health care organizations.</p><p>ISO/TS 22220:2011 defines demographic and oth

40791,TS,,ISO/TS 22239-1:2009,Road vehicles — Child seat presence and orientation detection system (CPOD) — Part 1: Specifications and test methods,Véhicules routiers — Système de détection de la présence d'un siège enfant et de son orientation (CPOD) — Partie 1: Spécifications et méthodes d'essai,2009-12-15,1,['43.040.80'],ISO/TC 22/SC 36,9599,,[64158],"['en','ru']",70,"<p>ISO/TS 22239-1:2009 specifies a child seat presence detection system that enables child seats placed on any passenger seats to be automatically detected where a child is at risk from an active airbag. The system provides the option of using additional information about the orientation of the child seat.</p><p>ISO/TS 22239

44905,TS,,ISO/TS 22239-2:2009,Road vehicles — Child seat presence and orientation detection system (CPOD) — Part 2: Resonator specification,Véhicules routiers — Système de détection de la présence d'un siège enfant et de son orientation (CPOD) — Partie 2: Spécifications relatives aux résonateurs,2009-12-15,1,['43.040.80'],ISO/TC 22/SC 36,9599,,[64159],"['en','ru']",65,<p>ISO/TS 22239-2:2009 specifies the child seat presence and orientation detection (CPOD) resonator as part of the CPOD system. It defines the electrical and environmental requirements to be met by the resonators as a condition for CPOD compatibility.</p>

44906,TS,,ISO/TS 22239-3:2009,Road vehicles — Child seat presence and orientation detection system (CPOD) — Part 3: Labelling,Véhicules routiers — Système de détection de la présence d'un siège enfant et de son orientation (CPOD) — Partie 3: Étiquetage,2009-12-15,1,['43.040.80'],ISO/TC 22/SC 36,9599,,[64160],"['en','ru']",8,"<p>ISO/TS 22239-3:2009 specifies instructions for use as well as labelling requirements of child restraint systems (CRS) and vehicles equipped with the child seat presence and orientation detection system (CPOD) specified in ISO/TS 22239-1, which enables the automatic recognition of CRS placed on a passenger seat.</p>"

73036,TS,,ISO/TS 22287:2019,Health informatics — Workforce roles and capabilities for terminology and terminology services in healthcare (term workforce),Titre manque,2019-05-15,1,['35.240.80'],ISO/TC 215,9599,,[86416],['en'],35,"<p>This document specifies the tasks, roles, and key skills, requirements and competencies for personnel involved in terminology services in healthcare organizations. </p><p>This document specifies</p><p>— terminology services in healthcare organizations including the selection, authoring, and deployment and use of terminology subsets and maps; developing and managing terminology management processes and health information management related policies; perfo

50054,TS,,ISO/TS 22317:2015,Societal security — Business continuity management systems — Guidelines for business impact analysis (BIA),Sécurité sociétale — Systèmes de management de la continuité d'activité — Lignes directrices pour l'analyse d'impact sur l'activité,2015-09-17,1,['03.100.01'],ISO/TC 292,9599,,[79000],"['en','fr']",27,"<p>ISO/TS 22317:2015 provides guidance for an organization to establish, implement, and maintain a formal and documented business impact analysis (BIA) process. This Technical Specification does not prescribe a uniform process for performing a BIA, but will assist an organization to design a BIA process that is appropriate to its needs.</p><p>ISO/TS 22317:2015

65336,TS,,ISO/TS 22318:2015,Societal security — Business continuity management systems — Guidelines for supply chain continuity,Sécurité sociétale — Systèmes de management de la continuité en affaires — Lignes directrices pour la continuité de la chaîne d'approvisionnement,2015-09-16,1,['03.100.01'],ISO/TC 292,9599,,[79001],['en'],22,"<p>ISO/TS 22318:2015 gives guidance on methods for understanding and extending the principles of BCM embodied in ISO 22301 and ISO 22313 to the management of supplier relationships. This Technical Specification is generic and applicable to all organizations (or parts thereof), regardless of type, size and nature of business. It is applicable to the supply of pr

40918,TS,,ISO/TS 22367:2008,Medical laboratories — Reduction of error through risk management and continual improvement,Laboratoires médicaux — Réduction d'erreurs par gestion du risque et amélioration continue,2008-04-24,1,['11.100.01'],ISO/TC 212,9599,,[71254],"['en','ru']",10,"<p>ISO/TS 22367:2008 characterizes the application of ISO 15189 as a system for reducing laboratory error and improving patient safety by applying the principles of risk management, with reference to examination aspects, especially to pre- and post-examination aspects, of the cycle of laboratory medical care. ISO/TS 22367:2008 proposes a methodology for finding and characterizing medical laboratory error that would

53345,TS,Cor,ISO/TS 22367:2008/Cor 1:2009,Medical laboratories — Reduction of error through risk management and continual improvement — Technical Corrigendum 1,Laboratoires médicaux — Réduction d'erreurs par gestion du risque et amélioration continue — Rectificatif technique 1,2009-01-12,1,['11.100.01'],ISO/TC 212,9599,,[71254],"['en','ru']",1,

55406,TS,,ISO/TS 22391-7:2011,Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 7: Guidance for the assessment of conformity,Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polyéthylène de meilleure résistance à la température (PE-RT) — Partie 7: Guide pour l'évaluation de la conformité,2011-11-16,1,"['93.025','23.040.01','91.140.60']",ISO/TC 138/SC 2,9599,,[68528],"['en','fr']",14,"<p>ISO/TS 22391-7:2011 gives guidance on the assessment of conformity of products and assemblies in accordance with other applicable part(s) of ISO 22391 intended to be included in the manufacturer's q

50290,TS,,ISO/TS 22393:2021,Security and resilience — Community resilience — Guidelines for planning recovery and renewal,Titre manque,2021-08-31,1,['03.100.01'],ISO/TC 292,9599,,[84336],['en'],36,"<p>This document gives guidance on how to develop recovery plans and renewal strategies from a major emergency, disaster or crisis (such as the COVID-19 pandemic). It provides guidelines on how to identify the short-term, transactional activities needed to reflect and learn, review preparedness of parts of the system impacted by the crisis, and reinstate operations to build preparedness. It also distinguishes a longer-term perspective of recovery, called “renewal”. In describing renewal, the docum

37154,TS,,ISO/TS 22475-2:2006,Geotechnical investigation and testing — Sampling methods and groundwater measurements — Part 2: Qualification criteria for enterprises and personnel,Reconnaissance et essais géotechniques — Méthodes de prélèvement et mesurages piézométriques — Partie 2: Critères de qualification des entreprises et du personnel,2006-09-14,1,['93.020'],ISO/TC 182,9599,,"[71003,78318]",['en'],4,"<p>ISO/TS 22475-2:2006 specifies the qualification criteria for an enterprise and personnel performing sampling and groundwater measurement services so that all have the appropriate experience, knowledge and qualifications as well as the correct equipment for and groundwater measurements f