Withdrawn and superseded ISO standards — page 246 of 246

72262,TS,,ISO/TS 7240-29:2017,Fire detection and alarm systems — Part 29: Video fire detectors,Systèmes de détection et d'alarme d'incendie — Partie 29: Détecteurs de fumée vidéo,2017-06-14,1,['13.220.20'],ISO/TC 21/SC 3,9599,,[83347],['en'],90,"<p>ISO/TS 7240-29:2017 specifies requirements, test methods and performance criteria for video fire detectors (VFD), which operate in the visible spectrum, for use in fire detection and alarm systems installed in and around buildings (see ISO 7240‑1). For the testing of other types of VFD working on different principles, ISO/TS 7240-29:2017 can be used only for guidance.</p><p>Detectors developed for the protection of specific risks that incorporate

41145,TS,,ISO/TS 7240-9:2006,Fire detection and alarm systems — Part 9: Test fires for fire detectors,Systèmes de détection et d'alarme d'incendie — Partie 9: Essais sur foyers pour détecteurs d'incendie,2006-01-09,1,['13.220.20'],ISO/TC 21/SC 3,9599,,[55318],['en'],41,"<p>ISO/TS 7240-9:2006 describes methods of test using test fires to which fire detectors, such as smoke, heat and flame are the be subjected as specified in other International Standards for such detectors.</p>"

55318,TS,,ISO/TS 7240-9:2012,Fire detection and alarm systems — Part 9: Test fires for fire detectors,Systèmes de détection et d'alarme d'incendie — Partie 9: Essais sur foyers pour détecteurs d'incendie,2012-12-11,2,['13.220.20'],ISO/TC 21/SC 3,9599,[41145],[76917],['en'],54,"<p>ISO/TS 7240-9:2012 describes methods of test using test fires to which fire detectors, such as smoke, heat, flame are subjected as specified in other parts of ISO 7240 for such detectors.</p>"

50798,TS,,ISO/TS 8000-1:2011,Data quality — Part 1: Overview,Qualité des données — Partie 1: Aperçu,2011-12-09,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[81745],['en'],1,"<p>ISO/TS 8000-1:2011 contains an introduction to ISO 8000. Itcontains a statement of the scope of ISO 8000 as a whole,principles of data quality, the high-level data architecture of ISO8000, a description of the structure of ISO 8000, and a summary ofthe content of the other parts of the general data quality seriesof parts of ISO 8000. It also describes the relationship betweenISO 8000 and other standards.</p>"

52129,TS,,ISO/TS 8000-100:2009,Data quality — Part 100: Master data: Overview,Qualité des données — Partie 100: Données permanentes: Aperçu général,2009-07-23,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[62392],['en'],2,"<p>The master data quality series of parts of ISO 8000 addressesthe quality of master data. ISO/TS 8000-100:2009 specifies thescope of the master data quality series of parts of ISO 8000,introduces master data, describes the data architecture for masterdata, and gives an overview of the remaining parts of theseries.</p>"

50800,TS,,ISO/TS 8000-110:2008,"Data quality — Part 110: Master data: Exchange of characteristic data: Syntax, semantic encoding, and conformance to data specification","Qualité des données — Partie 110: Données permanentes: Échange des données caractéristiques: Syntaxe, sémantique, encodage et conformité aux spécifications de données",2008-04-22,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[51653],['en'],5,"<p>ISO/TS 8000-110:2008 specifies general, syntax, semantic encoding and data specification requirements for master data messages between organizations and systems. The focus of ISO/TS 8000-110:2008 is on requirements that can be checked by computer. </p>"

50801,TS,,ISO/TS 8000-120:2009,Data quality — Part 120: Master data: Exchange of characteristic data: Provenance,Qualité des données — Partie 120: Données permanentes: Échange des données caractéristiques: Provenance,2009-07-23,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[62393],['en'],3,"<p>ISO/TS 8000-120:2009 specifies requirements for therepresentation and exchange of information about the provenance ofmaster data that consists of characteristic data, and supplementsthe requirements of ISO 8000-110. Provenance is the history orpedigree of a property value. Any claim of conformance to ISO/TS8000-120:2009 implies a claim of conformance to ISO 8000-110.ISO/TS 8000-120:2009 includes a Unified Mode

50802,TS,,ISO/TS 8000-130:2009,Data quality — Part 130: Master data: Exchange of characteristic data: Accuracy,Qualité des données — Partie 130: Données permanentes: Échange de données caractéristiques: Exactitude,2009-11-30,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[62394],['en'],1,<p>ISO/TS 8000-130:2009 is an optional addition to ISO/TS 8000-120and specifies requirements for representation and exchange ofinformation about accuracy of master data that consists ofcharacteristic data.</p>

53589,TS,,ISO/TS 8000-140:2009,Data quality — Part 140: Master data: Exchange of characteristic data: Completeness,Qualité des données — Partie 140: Données permanentes: Échange de données caractéristiques: Complétude,2009-11-30,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[62395],['en'],1,<p>ISO/TS 8000-140:2009 is an optional addition to ISO/TS 8000-120and specifies requirements for representation and exchange ofinformation about completeness of master data that consists ofcharacteristic data.</p>

54579,TS,,ISO/TS 8000-150:2011,Data quality — Part 150: Master data: Quality management framework,Qualité des données — Partie 150: Données permanentes: Cadre de management de la qualité,2011-12-07,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[80753],['en'],26,"<p>ISO/TS 8000-150:2011 specifies fundamental principles of master data quality management, and requirements for implementation, data exchange and provenance. ISO/TS 8000-150:2011 also contains an informative framework that identifies processes for data quality management. This framework can be used in conjunction with, or independently of, quality management systems standards, for example, ISO 9001.</p>"

51240,TS,,ISO/TS 80004-1:2010,Nanotechnologies — Vocabulary — Part 1: Core terms,Nanotechnologies — Vocabulaire — Partie 1: Termes 'coeur',2010-10-06,1,"['07.120','01.040.07']",ISO/TC 229,9599,,[68058],"['en','fr']",4,<p>ISO/TS 80004-1:2010 lists terms and definitions related to core terms in the field of nanotechnologies. It is intended to facilitate communications between organizations and individuals in industry and those who interact with them.</p>

68058,TS,,ISO/TS 80004-1:2015,Nanotechnologies — Vocabulary — Part 1: Core terms,Nanotechnologies — Vocabulaire — Partie 1: Termes 'coeur',2015-11-18,2,"['07.120','01.040.07']",ISO/TC 229,9599,[51240],[79525],"['en','fr']",3,<p>ISO/TS 80004-1:2015 lists terms and definitions related to core terms in the field of nanotechnologies. It is intended to facilitate communications between organizations and individuals in industry and those who interact with them.</p>

63253,TS,,ISO/TS 80004-11:2017,"Nanotechnologies — Vocabulary — Part 11: Nanolayer, nanocoating, nanofilm, and related terms","Nanotechnologies — Vocabulaire — Partie 11: Nanocouche, nanorevêtement, nanofilm et termes associés",2017-06-01,1,"['07.120','01.040.07']",ISO/TC 229,9599,,[79525],"['en','fr']",7,"<p>ISO/TS 80004-11:2017 lists terms and definitions, and specifies an extensible taxonomic terminology framework for nanolayers, nanocoatings, nanofilms, and related terms in the field of nanotechnologies.</p>"

64741,TS,,ISO/TS 80004-13:2017,Nanotechnologies — Vocabulary — Part 13: Graphene and related two-dimensional (2D) materials,Nanotechnologies — Vocabulaire — Partie 13: Graphène et autres matériaux bidimensionnels,2017-09-06,1,"['01.040.07','07.120']",ISO/TC 229,9599,,[82855],"['en','fr']",21,"<p>ISO/TS 80004-13:2017 lists terms and definitions for graphene and related two-dimensional (2D) materials, and includes related terms naming production methods, properties and their characterization.</p><p>It is intended to facilitate communication between organizations and individuals in research, industry and other interested parties and those who interact with them.</p>"

54440,TS,,ISO/TS 80004-2:2015,Nanotechnologies — Vocabulary — Part 2: Nano-objects,Nanotechnologies — Vocabulaire — Partie 2: Nano-objets,2015-06-04,1,"['07.120','01.040.07']",ISO/TC 229,9599,[44278],[79525],"['en','fr']",10,<p>ISO/TS 80004-2:2015 lists terms and definitions related to particles in the field of nanotechnologies.</p>

50741,TS,,ISO/TS 80004-3:2010,Nanotechnologies — Vocabulary — Part 3: Carbon nano-objects,Nanotechnologies — Vocabulaire — Partie 3: Nano-objets en carbone,2010-04-19,1,"['07.120','01.040.07']",ISO/TC 229,9599,,[75335],"['en','fr']",7,<p>ISO/TS 80004-3:2010 lists terms and definitions related to carbon nano-objects in the field of nanotechnologies. It is intended to facilitate communications between organizations and individuals in industry and those who interact with them.</p>

52195,TS,,ISO/TS 80004-4:2011,Nanotechnologies — Vocabulary — Part 4: Nanostructured materials,Nanotechnologies — Vocabulaire — Partie 4: Matériaux nanostructurés,2011-11-21,1,"['07.120','01.040.07']",ISO/TC 229,9599,,"[79525,70180]","['en','fr']",7,"<p>ISO/TS 80004-4:2011 gives terms and definitions for materials in the field of nanotechnologies where one or more components are nanoscale regions and the materials exhibit properties attributable to the presence of those nanoscale regions. It is intended to facilitate communications between organizations and individuals in industry and those who interact with them.</p><p>Materials classified as nanostructured have an internal or surface struc

52333,TS,,ISO/TS 80004-6:2013,Nanotechnologies — Vocabulary — Part 6: Nano-object characterization,Nanotechnologies — Vocabulaire — Partie 6: Caractérisation des nano-objets,2013-10-14,1,"['07.120','01.040.07']",ISO/TC 229,9599,,[74665],"['en','fr']",24,<p>ISO/TS 80004-6:2013 lists terms and definitions relevant to the characterization of nano-objects.</p>

52937,TS,,ISO/TS 80004-8:2013,Nanotechnologies — Vocabulary — Part 8: Nanomanufacturing processes,Nanotechnologies — Vocabulaire — Partie 8: Processus de nanofabrication,2013-12-10,1,"['07.120','01.040.07']",ISO/TC 229,9599,,[74666],"['en','fr']",27,<p>ISO/TS 80004-8:2013 gives terms and definitions related to nanomanufacturing processes in the field of nanotechnologies. It forms one part of multi-part terminology and definitions documentation covering the different aspects of nanotechnologies.</p>

63881,TS,,ISO/TS 81346-10:2015,"Industrial systems, installations and equipment and industrial products — Structuring principles and reference designation — Part 10: Power plants","Systèmes industriels, installations et appareils et produits industriels — Principes de structuration et désignation de référence — Partie 10: Centrales électriques",2015-02-05,1,['01.110'],ISO/TC 10/SC 10,9599,,[75471],['en'],44,"<p>ISO/TS 81346-10:2015 contains sector-specific stipulations for structuring principles and reference designation rules on technical products and technical product documentation of power plants.</p><p>It applies in combination with IEC 81346‑2, ISO/TS 81346‑3, VGB-B 101 and VGB-B 102 fo

59598,TS,,ISO/TS 81346-3:2012,"Industrial systems, installations and equipment and industrial products — Structuring principles and reference designations — Part 3: Application rules for a reference designation system","Systèmes industriels, installations et appareils, et produits industriels — Principes de structuration et désignations de référence — Partie 3: Règles d'application pour un système de désignation de référence",2012-07-11,1,['01.110'],ISO/TC 10/SC 10,9599,[38178],[71419],['en'],49,"<p>ISO/TS 81346-3 establishes comprehensive and practice-oriented principles and rules for the designation of technical objects within a system, as well as for the designation of connections, signal

34398,TS,,ISO/TS 8611-2:2005,Pallets for materials handling — Flat pallets — Part 2: Performance requirements and selection of tests,Palettes pour la manutention — Palettes plates — Partie 2: Exigences de performance et choix des essais,2005-03-03,1,['55.180.20'],ISO/TC 51,9599,"[15917,15918]",[50115],"['en','fr']",11,"<p>ISO 8611-2:2005 specifies the performance requirements and the selection of tests for flat pallets of all materials being subjected to the tests defined in ISO 8611-1. It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that may be mechanically attached to the pallet and which contributes to the strength of the pallet.</p

34144,TS,,ISO/TS 8611-3:2005,Pallets for materials handling — Flat pallets — Part 3: Maximum working loads,Palettes pour la manutention — Palettes plates — Partie 3: Charges maximales en service,2005-07-30,1,['55.180.20'],ISO/TC 51,9599,"[15917,15918]",[50116],"['en','fr']",10,"<p>ISO/TS 8611-3:2005 proposes relevant test methods to determine a range of maximum working loads for different payloads and loading and support conditions, which depend on the nature of the load being carried.</p>"

35097,TS,,ISO/TS 9250-1:2004,Earth-moving machinery — Multilingual listing of equivalent terms — Part 1: General,Engins de terrassement — Liste multilingue de termes équivalents — Partie 1: Généralités,2004-07-02,1,"['01.040.53','53.100']",ISO/TC 127/SC 4,9599,,[62385],"['en','fr','ru']",18,"ISO/TR 9250-1:2004 gives a list of equivalent terms in English, French and Russian relating to earth-moving machinery thoroughly defined in existing ISO International Standards."

35098,TS,,ISO/TS 9250-2:2004,Earth-moving machinery — Multilingual listing of equivalent terms — Part 2: Performance and dimensions,Engins de terrassement — Liste multilingue de termes équivalents — Partie 2: Performance et dimensions,2004-07-02,1,"['01.040.53','53.100']",ISO/TC 127/SC 4,9599,,[62386],"['en','fr','ru']",17,"<p>ISO 9250-2:2004 gives a list of equivalent terms in English, French and Russian relating to the performance and dimensions of earth-moving machinery thoroughly defined in existing ISO International Standards.</p>"

83516,TS,,ISO/TS 9491-1:2023,"Biotechnology — Predictive computational models in personalized medicine research — Part 1: Constructing, verifying and validating models","Biotechnologie — Modèles informatiques prédictifs dans la recherche sur la médecine personnalisée — Partie 1: Construction, vérification et validation des modèles",2023-06-14,1,['07.080'],ISO/TC 276,9599,,[87314],['en'],31,"<p class='MsoBodyText' style='mso-layout-grid-align: none; text-autospace: none;'><span lang='EN-GB' style='mso-bidi-font-size: 12.0pt;'>This document specifies requirements and recommendations for the design, development and establishment of predictive computational models for research purposes in the fi

37698,TS,,ISO/TS 9941:2003,Milk and canned evaporated milk — Determination of tin content — Spectrometric method,Lait et lait concentré non sucré en boîte — Détermination de la teneur en étain — Méthode spectrométrique,2003-11-28,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[40938],['en'],6,<p>ISO/TS 9941|IDF/RM 160:2003 specifies a spectrometric method for the determination of the tin content of whole milk and canned evaporated milk. The detection limit of the method is 5 mg/kg.</p>

44189,TTA,,ISO/TTA 5:2006,Code of practice for creep/fatigue testing of cracked components,Code de bonne pratique pour les essais de fluage/fatigue des composants fissurés,2006-12-05,1,['19.060'],VAMAS,9599,,[50184],['en'],77,"<p>The scope of ISO/TTA 5:2006 is to recommend and establish standardized techniques for measuring and analysing Creep Crack Initiation (CCI), Creep Crack Growth (CCG), and Creep Fatigue Crack Growth (CFCG) characteristics using a wide range of pre-cracked standard and non-standard 'feature' geometries.</p>"

36207,IWA,,IWA 1:2001,Quality management systems — Guidelines for process improvements in health service organizations,Systèmes de management de la qualité — Lignes directrices pour l'amélioration des procédés dans les organisations des services de santé,2001-09-20,1,"['03.120.10','11.020']",ISO/TMBG,9599,,[41768],['en'],68,

61975,IWA,,IWA 11:2012,Guidelines for evaluating cookstove performance,Lignes directrices pour évaluer les performances d'une table de cuisson,2012-06-04,1,['97.040.20'],ISO/TMBG,9599,,"[66519,73935]",['en'],6,"<p>IWA 11:2012 provides a framework for rating cookstoves against tiers of performance for a series of performance indicators, including </p><ul><li> fuel use (efficiency),</li><li> emissions (carbon monoxide and particulate matter 2,5),</li><li> indoor emissions (carbon monoxide and particulate matter 2,5), and</li><li> safety.</li></ul><p>IWA 11:2012 does not select a single laboratory protocol to determine cookstove performance. Instead, it enables stove tes

64736,IWA,,IWA 14-1:2013,"Vehicle security barriers — Part 1: Performance requirement, vehicle impact test method and performance rating","Barrières de sécurité de véhicule — Partie 1: Exigence de performance, méthode d'essai d'impact du véhicule et taux de performance",2013-11-15,1,['93.080.30'],ISO/TMBG,9599,,[50080],"['en','ru']",46,<p>IWA 14-1:2013 specifies the essential impact performance requirement for a vehicle security barrier (VSB) and a test method for rating its performance when subjected to a single impact by a test vehicle not driven by a human being.</p>

64737,IWA,,IWA 14-2:2013,Vehicle security barriers — Part 2: Application,Barrières de sécurité de véhicule — Partie 2: Applications,2013-11-15,1,['93.080.30'],ISO/TMBG,9599,,[81415],"['en','ru']",58,"<p>IWA 14-2:2013 provides guidance for the selection, installation and use of vehicle security barriers (VSBs) and describes the process of producing operational requirements (ORs).</p><p>It also gives guidance on a design method for assessing the performance of a VSB.</p>"

65552,IWA,,IWA 15:2015,Specification and method for the determination of performance of automated liquid handling systems,Spécification et méthode pour la détermination de performance des systèmes automatisés de manipulation de liquides,2015-10-15,1,['71.040.20'],ISO/TMBG,9599,,"[76958,76952,76959]",['en'],119,"<p>IWA 15:2015 specifies methods for testing the volumetric performance of air-displacement, system-liquid filled and positive displacement automated liquid handling systems (ALHS), including an estimation of measurement uncertainties and established traceability to reference standards (preferably, traceability to SI Units). The testing methods specified in this document may also be u

67844,IWA,,IWA 16:2015,International harmonized method(s) for a coherent quantification of CO2e emissions of freight transport,Méthode(s) internationale(s) harmonisée(s) pour une quantification cohérente des émissions de CO2e par le transport de fret,2015-01-23,1,"['13.020.40','55.180.99']",ISO/TMBG,9599,,[78864],['en'],30,"<p>IWA 16:2015 defines the framework for methods for coherent quantification of CO₂e emissions of freight transport (total and intensity) on the following three levels:</p><p>1) Level of operation of transport chain element (TCE).</p><p>2) Level of network including company level.</p><p>3) Level of cargo.</p><p>IWA 16:2015 provides a gap analysis ident

69354,IWA,,IWA 19:2017,Guidance principles for the sustainable management of secondary metals,Principes directeurs pour la gestion durable des métaux de seconde fusion,2017-03-29,1,"['13.020.20','77.020']",ISO/TMBG,9599,,[80694],['en'],51,"<p>IWA 19:2017 provides a global framework for the sustainable management of secondary metals. The framework includes sustainability and traceability requirements for metals recovered.</p><p>IWA 19:2017 guides economic operators of secondary metals value chains, including those engaged in the informal sector, in the efficient and credible implementation of improved recycling practices, in particular in emerging and developing economies.</p>"

38866,IWA,,IWA 2:2003,Quality management systems - Guidelines for the application of ISO 9001:2000 in education,Systèmes de management de la qualité — Lignes directrices pour l'application de l'ISO 9001:2000 dans l'éducation,2003-11-06,1,['03.120.10'],ISO/TMBG,9599,,[45805],['en'],70,"<p>International Workshop Agreement IWA 2:2003 provides guidelines for the application of ISO 9001:2000 in educational organizations providing educational products. </p><p>These guidelines do not add to, change or modify the requirements of ISO 9001:2000, and are not intended for use in contracts for compliance assessments or for certification.</p><p>Each clause of ISO 9001:2000 is included before the correspon

70603,IWA,,IWA 23:2016,Interoperability of microfluidic devices — Guidelines for pitch spacing dimensions and initial device classification,Interopérabilité des dispositifs microfluidiques — Lignes directrices relatives aux valeurs du pas et à la classification initiale des dispositifs,2016-08-24,1,['71.040.10'],ISO/TMBG,9599,,[74157],['en'],12,"<p>IWA 23:2016 is a consensus document developed by the workshop participants and observers in response to the need for standardization and harmonization of pitch spacing dimension, initial device classification and terminology of relevance.</p><p>IWA 23:2016 will serve as a guideline and is applicable to various interested parties and stakeholders i

75808,IWA,,IWA 29:2019,Professional farmer organization — Guidelines,Organisation professionnelle agricole — Lignes directrices,2019-02-25,1,['65.020.01'],ISO/TMBG,9599,,[85377],"['en','fr']",16,"<p>This document provides guidelines for the characteristics of a professional farmer organization. It is intended to be relevant for large and small professional farmer organizations, without regard to the specific crop or product. The implementation and interpretation of this document can be adapted for very small or nascent organizations, for specific or differentiated products, or for markets with special requirements.</p>"

76418,IWA,,IWA 32:2019,Screening of genetically modified organisms (GMOs) in cotton and textiles,Criblage pour la détection des organismes génétiquement modifiés (OGM) dans le coton et les textiles,2019-04-12,1,['59.020'],ISO/TC 34/SC 16,9599,,"[81195,83812,83811]",['en'],31,"<p>This document provides requirements and recommendations to laboratories that perform genetically modified organism (GMO) analyses in cottonseed, leaf, cotton fibre and cotton fibre-derived materials.</p><p>The following are within the scope of this document:</p><p>a) identifying the materials to be assessed, based on the probability of obtaining good quality, fit for purpose DNA from the materials in subsequent st

77455,IWA,,IWA 33-1:2019,Technical guidelines for the development of small hydropower plants — Part 1: Vocabulary,Lignes directrices techniques pour le développement de la petite hydraulique — Partie 1: Titre manque,2019-12-10,1,['27.140'],ISO/TC 339,9599,,[89622],['en'],60,<p>This document defines the professional technical terms and definitions commonly used for small hydropower (SHP) plants.</p>

43020,IWA,,IWA 4:2005,Quality management systems — Guidelines for the application of ISO 9001:2000 in local government,Systèmes de management de la qualité — Lignes directrices pour l'application de l'ISO 9001:2000 à la collectivité locale,2005-10-06,1,['03.120.10'],ISO/TMBG,9599,,[53504],"['en','ru']",53,"<p>The objective of International Workshop Agreement IWA 4:2005 is to provide local governments with guidelines for the voluntary application of ISO 9001:2000 on an integral basis. These guidelines do not, however, add, change or modify the requirements of ISO 9001:2000. </p><p>For a local government to be considered reliable, it should guarantee minimum conditions of reliability for the p

53504,IWA,,IWA 4:2009,Quality management systems — Guidelines for the application of ISO 9001:2008 in local government,Systèmes de management de la qualité — Lignes directrices pour l'application de l'ISO 9001:2008 à la collectivité locale,2009-02-23,2,['03.120.10'],ISO/TMBG,9599,[43020],[61386],['en'],54,"<p>The objective of International Workshop Agreement IWA 4:2009 is to provide local governments with guidelines for the voluntary application of ISO 9001:2008 on an integral basis. These guidelines do not, however, add, change or modify the requirements of ISO 9001:2008.</p><p>For a local government to be considered reliable, it should guarantee minimum conditions of reliability for the pr