Withdrawn and superseded ISO standards — page 228 of 246

77493,TR,,ISO/TR 23975:2019,Traditional Chinese medicine — Priority list of single herbal medicines for developing standards,Médecine traditionnelle chinoise — Liste prioritaire de médicaments à base de plantes pour les normes en cours de développement,2019-11-08,1,"['01.120','11.120.10']",ISO/TC 249/SC 1,9599,,[86397],['en'],63,<p>This document provides a reference of single herbal medicines in order of their priority in the development of international standards.</p>

42015,TR,,ISO/TR 24098:2007,"Intelligent transport systems — System architecture, taxonomy and terminology — Procedures for developing ITS deployment plans utilizing ITS system architecture","Systèmes intelligents de transport — Architecture, taxinomie et terminologie des systèmes — Procédures pour développer des plans de déploiement ITS en utilisant une architecture ITS",2007-03-09,1,['35.240.60'],ISO/TC 204,9599,,[75000],['en'],12,"<p>ISO/TR 24098:2007 describes the procedure for developing Intelligent Transport System (ITS) deployment plans utilizing ITS system architectures. The document consists of the basic policy of ITS deployment and the procedure for developing ITS deployment plans

42040,TR,,ISO/TR 24156:2008,Guidelines for using UML notation in terminology work,Lignes directrices pour l'application de la notation UML dans le travail terminologique,2008-10-30,1,['01.020'],ISO/TC 37/SC 1,9599,,"[57418,57420,68204]","['en','fr']",19,"<p>ISO/TR 24156:2008 gives guidelines for using a subset of the Unified Modeling Language, UML, to represent the results of terminological concept analysis. It describes how object modelling techniques can be used for this purpose. The representation of concepts and concept relations used in terminology work by corresponding entities in the UML is described.</p><p>ISO/TR 24156:2008 does not describe the UML and its general use in depth. Thes

78035,TR,,ISO/TR 24188:2022,Large outdoor fires and the built environment — Global overview of different approaches to standardization,Titre manque,2022-06-13,1,['13.220.01'],ISO/TC 92,9599,,[89148],['en'],19,<p>This document provides a review of global testing methodologies related to the vulnerabilities of buildings from large outdoor fire exposures. It also provides information on land use management practices. Some of the test methods outlined in this document have been developed in the context of building fires and extrapolated to external fire exposures.</p>

78836,TR,,ISO/TR 24464:2020,Automation systems and integration — Industrial data — Visualization elements of digital twins,Titre manque,2020-11-10,1,"['35.240.50','25.040.40']",ISO/TC 184/SC 4,9599,,[88262],['en'],19,<p>This document analyses visualization elements that are key components of the interface between the physical asset and the avatar (digital replica of the physical asset).</p>

61980,TR,,ISO/TR 24496:2012,Office furniture — Office work chairs — Methods for the determination of dimensions,Mobilier de bureau — Sièges de travail pour bureau — Méthodes pour déterminer les dimensions,2012-11-15,1,['97.140'],ISO/TC 136,9599,,[66835],['en'],69,

42268,TR,,ISO/TR 24498:2006,"Paper, board and pulps — Estimation of uncertainty for test methods","Papiers, cartons et pâtes — Estimation de l'incertitude pour les méthodes d'essai",2006-09-27,1,"['85.060','85.040']",ISO/TC 6,9599,,[66539],"['en','fr','ru']",6,"<p>ISO/TR 24498:2006 presents guidelines for the selection of the best method for the estimation of the precision of methods for testing pulp, paper and board.</p>"

66539,TR,,ISO/TR 24498:2019,"Paper, board and pulps — Estimation of uncertainty for test methods by interlaboratory comparisons","Papiers, cartons et pâtes — Estimation de l'incertitude pour les méthodes d'essai par comparaisons interlaboratoires",2019-01-10,2,"['85.060','85.040']",ISO/TC 6,9599,[42268],[81646],['en'],12,"<p>This document presents guidelines for a methodology for the estimation of the uncertainty of methods for testing pulps, paper, board, cellulosic nanomaterials, and lignins, as well as products thereof containing any portion of recycled material or material intended for recycling.</p>"

42320,TR,,ISO/TR 24578:2012,Hydrometry — Acoustic Doppler profiler — Method and application for measurement of flow in open channels,Hydrométrie — Profils Doppler acoustiques — Méthode et application pour le mesurage du débit en conduites ouvertes,2012-05-11,1,['17.120.20'],ISO/TC 113/SC 1,9599,,[70758],['en'],45,"<p>This Technical Report deals with the use of boat-mounted acoustic Doppler current profilers (ADCPs) for</p><p>determining flow in open channels without ice cover. It describes a number of methods of deploying ADCPs to</p><p>determine flow. Although, in some cases, these measurements are intended to determine the stage-discharge</p><p>relationship of a gauging station, this Tech

79332,TR,,ISO/TR 24666:2022,Sports and recreational facilities — Probes for entrapment/entanglement on playground equipment — Collection of data,Installations sportives et récréatives — Gabarits d’évaluation du coincement/happement sur les équipements d’aires de jeux — Recueil de données,2022-03-15,1,['97.200.40'],ISO/TC 83,9599,,[85270],['en'],27,"<p>This document compiles a collection of different probes/gauges for assessing common playground equipment safety performance to eliminate known safety hazards such as: entrapment and entanglement hazards on playground, playspaces, and associated equipment used in different countries/regions around the world. It also explains some historical cont

59587,TR,,ISO/TR 24971:2013,Medical devices — Guidance on the application of ISO 14971,Dispositifs médicaux — Directives relatives à l'ISO 14971,2013-06-19,1,['11.040.01'],ISO/TC 210,9599,,[74437],"['en','ru']",12,"<p>ISO/TR 24971:2013 provides guidance in addressing specific areas of ISO 14971 when implementing risk management. This guidance is intended to assist manufacturers and other users of the standard to understand the role of international product safety and process standards in risk management, develop the policy for determining the criteria for risk acceptability, incorporate production and post-production feedback loop into risk management, differentiate between 'information for

42741,TR,,ISO/TR 25100:2008,Intelligent transport systems — Systems architecture — Harmonization of ITS data concepts,Systèmes intelligents de transport — Architecture des systèmes — Harmonisation des concepts de données SIT,2008-03-31,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[59699],['en'],15,<p>The scope of ISO/TR 25100:2008 is harmonization of data concepts that are being managed by data registry and data dictionaries such as those described in ISO 14817:2002.</p>

41958,TR,,ISO/TR 25107:2006,Non-destructive testing — Guidelines for NDT training syllabuses,Essais non destructifs — Lignes directrices pour les programmes de formation en END,2006-06-29,1,['19.100'],ISO/TC 135,9599,,"[71261,62660,71997]",['en'],81,"<p>ISO/TR 25107:2005 gives guidelines for non-destructive testing (NDT) training syllabuses, with the intention of harmonising and maintaining the general standard of training of NDT personnel for industrial needs. It also establishes the minimum requirements for effective structured training of NDT personnel to ensure eligibility for qualification examinations leading to third-party certification according to recognized standards. In addition t

41959,TR,,ISO/TR 25108:2006,Non-destructive testing — Guidelines for NDT personnel training organizations,Essais non destructifs — Lignes directrices pour les organismes de formation du personnel END,2006-06-29,1,['19.100'],ISO/TC 135,9599,,"[71999,62661,71260]",['en'],9,"<p>ISO/TR 25108:2005 gives guidelines for non-destructive testing (NDT) training organizations, with the intention of harmonizing and maintaining the general standard of training of NDT personnel for industrial needs. It also establishes the minimum requirements for effective structured training of NDT personnel to ensure eligibility for qualification examinations leading to third-party certification according to recognized

45555,TR,,ISO/TR 25257:2009,Health informatics — Business requirements for an international coding system for medicinal products,Informatique de santé — Exigences d'affaire pour un système de codage international pour les produits médicaux,2009-08-20,1,['35.240.80'],ISO/TC 215,9599,,[56853],['en'],42,<p>ISO/TR 25257:2009 covers:</p><ol><li>specifying the international business requirements for an international coding system for medicinal products;</li><li>analysing the most significant international coding systems for medicinal products in current use and within the context of the objectives that each system was designed to serve;</li><li>assessing the potential ability of each international

43056,TR,,ISO/TR 25679:2005,Mechanical testing of metals — Symbols and definitions in published standards,Essais mécaniques des métaux — Symboles et définitions figurant dans les normes publiées,2005-11-17,1,"['01.040.77','77.040.10']",ISO/TC 164,9599,[2460],[68618],"['en','fr']",64,"<p>ISO/TR:25679:2005 enumerates the symbols and definitions used in International Standards for specific methods of mechanical testing of metallic materials, which are the responsibility of ISO Technical Committee 164, <i>Mechanical testing of metals</i>. The data is indexed alphabetically and via a coding system. Annex A provides an additional cross-reference between the coding system and relevant International

43199,TR,,ISO/TR 25741:2008,Lifts and escalators subject to seismic conditions — Compilation report,Ascenseurs et escaliers mécaniques soumis aux conditions sismiques — Rapport de compilation,2008-03-10,1,['91.140.90'],ISO/TC 178,9599,,"[64024,81909]",['en'],45,<p>ISO/TR 25741:2008 provides a compilation of relevant safety standards pertaining to protection of the user and vertical transportation equipment during seismic activity.</p>

43307,TR,,ISO/TR 25901:2007,Welding and related processes — Vocabulary,Soudage et techniques connexes — Vocabulaire,2007-07-03,1,"['25.160.10','01.040.25']",ISO/TC 44/SC 7,9599,,"[62525,62522,73788,62532,80282,62533,62534,84602,83920,55758,62523,62524]","['en','fr']",90,"<p>ISO/TR 25901:2007 defines terms specifically related to welding and allied processes, together with their definitions.</p>"

7595,TR,,ISO/TR 2604-7:1986,Steel products for pressure purposes — Quality requirements — Part 7: Carbon steel plate (thicknesses over 100 to 250 mm),Produits en acier pour appareils à pression — Spécifications de qualité — Partie 7: Tôles en aciers au carbone (épaisseur supérieure à 100 mm et inférieure ou égale à 250 mm),1986-12-18,1,"['23.040.10','77.140.75']",ISO/TC 17/SC 10,9599,,"[17002,16999,17003,17000,17001]","['en','fr']",14,

7607,TR,,ISO/TR 2630:1978,"Rubbers, raw — Sampling for inspection by variables",Caoutchouc brut — Échantillonnage pour contrôle par mesures,1978-11-01,1,['83.040.10'],ISO/TC 45/SC 3,9599,,[6427],['en'],4,

43748,TR,,ISO/TR 26762:2008,Natural gas — Upstream area — Allocation of gas and condensate,Gaz naturel — Zone amont — Allocation du gaz et du condensat,2008-07-07,1,['75.060'],ISO/TC 193/SC 3,9599,,"[75234,67137,87412]",['en'],77,"<p>ISO/TR 26762:2008 describes the production measurements, in terms of both hardware and procedures, that can be used to allocate the gas and condensate back to the individual concessions, reservoirs and wells in a fair and equitable way. The objective is to give an approach that is recognized to be current best practice and that has a wide support in the oil and gas industry.</p>"

7648,TR,,ISO/TR 2685:1984,Aircraft — Environmental conditions and test procedures for airborne equipment — Resistance to fire in designated fire zones,Aéronautique — Conditions et méthodes d'essai en environnement des équipements embarqués — Tenue au feu dans les zones dites 'FEU',1984-06-01,1,['49.020'],ISO/TC 20,9599,,[7649],['en'],36,

7691,TR,,ISO/TR 2721:1975,Withdrawal of ISO/TR 2721-1975,Annulation de l'ISO/TR 2721-1975,1975-02-01,1,['37.040.10'],ISO/TC 42,9599,,[7692],"['en','fr']",21,

35131,TR,,ISO/TR 27507:2010,Plain bearings — Recommendations for automotive crankshaft bearing environments,Paliers lisses — Recommendations pour les environnements des paliers de vilebrequins pour automobiles,2010-07-12,1,['21.100.10'],ISO/TC 123/SC 3,9599,,[62462],['en'],6,"<p>ISO/TR 27507:2010 gives recommendations for automotive crankshaft bearing environments. It specifies the various dimensions and conditions that most engine manufacturers can achieve with current production machinery in order to produce crankshaft bearing environments, which, generally, do not lead to bearing problems.</p>"

7760,TR,,ISO/TR 2778:1977,Wrought aluminium and aluminium alloys — Drawn tubes — Mechanical properties,Aluminium et alliages d'aluminium de corroyage — Tubes étirés — Propriétés mécaniques,1977-01-01,1,['23.040.15'],ISO/TC 79/SC 6,9599,,[12691],"['en','fr']",6,

67281,TR,,ISO/TR 27929:2024,Transportation of CO2 by ship,Transport de CO2 par bateau,2024-10-28,1,"['03.220.40','13.020.99']",ISO/TC 265,9599,,[91755],['en'],26,"<p class='MsoBodyText'><span lang='EN-GB'>This document provides insights into the essential aspects of CO₂ shipping and provides basic descriptions of how the CO₂ carrier and technology therein is technically integrated with the CCS value chain. It also includes a description of specific challenges of transporting CO₂ as cargo, how this differs from other gases transported by ships today, and how this influences the ship design and operation. Finally, this document introduces how CO₂ shi

44444,TR,,ISO/TR 27957:2008,Road vehicles — Temperature measurement in anthropomorphic test devices — Definition of the temperature sensor locations,Véhicules routiers — Mesure de la température dans les dispositifs d'essai anthropomorphes — Définitions des positions des capteurs de température,2008-07-29,1,['43.180'],ISO/TC 22/SC 36,9599,,"[69506,74315]",['en'],7,"<p>ISO 27957:2008 defines the number and the arrangement of temperature measuring points for anthropomorphic test devices (ATDs), in order to ensure that the temperature of the ATD is in accordance with the temperature corridor prescribed by the applied test procedure.</p>"

7790,TR,,ISO/TR 2799:1978,Cellular plastics — Determination of the temperature at which fixed permanent deformation of rigid materials occurs under compressive load,Plastiques alvéolaires — Détermination de la température à laquelle un effort de compression produit une déformation permanente fixée des matériaux rigides,1978-06-01,1,['83.100'],ISO/TC 61/SC 10,9599,,[14405],['en'],4,

44846,TR,,ISO/TR 28642:2011,Dentistry — Guidance on colour measurement,Médecine bucco-dentaire — Directives relatives au mesurage de la couleur,2011-07-01,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[69046],['en'],10,"<p>ISO/TR 28642:2011 identifies three types of topics related to shade conformity and interconvertibility of monochromatic and polychromatic tissues and materials related to the discipline of dentistry; it describes visual and instrumental methods for assessment of these topics.</p><p>ISO/TR 28642:2011 suggests interpretation of the findings through colour difference thresholds, and provides guidelines for future standardization related to dental shade conformity and interconvertibil

45623,TR,,ISO/TR 29662:2009,Petroleum products and other liquids — Guidance for flash point testing,Produits pétroliers et autres liquides — Lignes directrices pour la détermination du point d'éclair,2009-11-24,1,['75.080'],ISO/TC 28,9599,,[72640],"['en','fr']",12,"<p>ISO/TR 29662:2009 is not intended to be a comprehensive manual on flash point tests and the interpretation of test results, however it covers the key aspects of these subjects.</p><p>The flash point test can be summarized as a procedure where a test portion is introduced into a temperature-controlled test cup and an ignition source is applied to the vapours produced by the test portion to determine if the vapour/air mixture is

8292,TR,,ISO/TR 3134-1:1977,Light metals and their alloys — Terms and definitions — Part 1: Materials,Métaux légers et leurs alliages — Termes de référence et définitions — Partie 1: Matériaux,1977-12-01,1,"['77.150.01','01.040.77','77.120.01']",ISO/TC 79,9599,,[8293],['en'],4,

8294,TR,,ISO/TR 3134-2:1977,Light metals and their alloys — Terms and definitions — Part 2: Unwrought products,Métaux légers et leurs alliages — Termes de référence et définitions — Partie 2: Formes brutes,1977-09-01,1,"['77.150.01','01.040.77']",ISO/TC 79,9599,,[8295],['en'],2,

8296,TR,,ISO/TR 3134-3:1977,Light metals and their alloys — Terms and definitions — Part 3: Wrought products,Métaux légers et leurs alliages — Termes de référence et définitions — Partie 3: Produits corroyés,1977-09-01,1,"['77.150.01','01.040.77']",ISO/TC 79,9599,,[8297],['en'],5,

8298,TR,,ISO/TR 3134-4:1977,Light metals and their alloys — Terms and definitions — Part 4: Castings,Métaux légers et leurs alliages — Termes de référence et définitions — Partie 4: Produits moulés,1977-09-01,1,"['77.150.01','01.040.77']",ISO/TC 79,9599,,[8299],['en'],2,

84978,TR,,ISO/TR 31700-2:2023,Consumer protection — Privacy by design for consumer goods and services — Part 2: Use cases,Protection des consommateurs — Respect de la vie privée assuré dès la conception des biens de consommation et services aux consommateurs — Partie 2: Cas d’usage,2023-01-31,1,"['03.100.01','03.080.30']",ISO/IEC JTC 1/SC 44,9599,,[91874],['en'],31,"<p class='MsoBodyText' style='mso-layout-grid-align: none; text-autospace: none;'><span lang='EN-GB' style='mso-bidi-font-size: 12.0pt;'>This document provides illustrative use cases, with associated analysis, chosen to assist in understanding the requirements of 31700-1.</span></p><p class='MsoBodyText' style='mso-layout-grid-al

8567,TR,,ISO/TR 3311:1974,Withdrawal of ISO/TR 3311-1975,Annulation de l'ISO/TR 3311-1975,1974-05-01,1,['23.040.10'],ISO/TC 5,9599,,[9985],['en'],2,

8570,TR,,ISO/TR 3313:1974,"Measurement of pulsating fluid flow in a pipe by means of orifice plates, nozzles or Venturi tubes, in particular in the case of sinusoidal or square wave intermittent periodic-type fluctuations","Mesure du débit d'un écoulement pulsatoire de fluide dans une conduite, au moyen de diaphragmes, tuyères ou tubes de Venturi, en particulier dans le cas de pulsations sinusoïdales ou périodiques intermittentes à ondes rectangulaires",1974-06-01,1,['17.120.10'],ISO/TC 30,9599,,[8571],['en'],24,

8571,TR,,ISO/TR 3313:1992,"Measurement of pulsating fluid flow in a pipe by means of orifice plates, nozzles or Venturi tubes","Mesurage du débit d'un écoulement pulsatoire de fluide dans une conduite au moyen de diaphragmes, tuyères ou tubes de Venturi",1992-07-09,2,['17.120.10'],ISO/TC 30/SC 2,9599,[8570],[28933],"['en','fr']",21,

28933,TR,,ISO/TR 3313:1998,Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments,Mesure de débit des fluides dans les conduites fermées — Lignes directrices relatives aux effets des pulsations d'écoulement sur les instruments de mesure de débit,1998-07-23,3,['17.120.10'],ISO/TC 30/SC 2,9599,[8571],[69223],['en'],40,

8852,TR,,ISO/TR 3498:1986,"Lubricants, industrial oils and related products (class L) — Recommendations for the choice of lubricants for machine tools","Lubrifiants, huiles industrielles et produits connexes (classe L) — Recommandations pour le choix des lubrifiants pour machines-outils",1986-10-02,2,['75.100'],ISO/TC 28/SC 4,9599,,[33800],"['en','fr']",5,<p>Is intended to establish a rationalized range of lubricants and to avoid unnecessary restriction on specifications or product descriptions that would inhibit future development. Is not intended to cover special requirements. Completes the rationalized range with a series of categories of products necessary for some countries according to

9120,TR,,ISO/TR 3666:1977,Viscosity of water,Viscosité de l'eau,1977-12-01,1,['71.040.30'],ISO/TC 28,9599,,[28607],"['en','fr']",2,

9302,TR,,ISO/TR 3778:1978,Agricultural tractors — Maximum actuating forces required to operate controls,Tracteurs agricoles — Forces maximales nécessaires pour manoeuvrer les commandes,1978-12-01,1,['65.060.10'],ISO/TC 23/SC 3,9599,,[9303],['en'],2,

9303,TR,,ISO/TR 3778:1987,Agricultural tractors — Maximum actuating forces required to operate controls,Tracteurs agricoles — Forces maximales nécessaires pour manoeuvrer les organes de commande,1987-04-09,2,['65.060.10'],ISO/TC 23/SC 3,9599,[9302],"[20657,36685]","['en','fr']",1,"<p>This second edition cancels and replaces the first edition (1978). Recommends the maximum actuating forces; the forces specified do not relate to machine performance. Tabulates the devices to be operated, the types of control, the actuating forces required (ranging from 70 to 600 N). Applies to tractors equipped with normal controls.</p>"

9357,TR,,ISO/TR 3814:1975,The development of tests for measuring 'reaction to fire' of building materials,Élaboration d'essais de mesurage de la réaction au feu des matériaux de bâtiment,1975-08-01,1,['13.220.50'],ISO/TC 92,9599,,[9358],['en'],17,

9358,TR,,ISO/TR 3814:1989,Tests for measuring 'reaction-to-fire' of building materials — Their development and application,Essais de mesurage de la 'réaction au feu' des matériaux de bâtiment — Leur élaboration et leur application,1989-12-14,2,['13.220.50'],ISO/TC 92/SC 1,9599,"[12990,9357]",[55976],"['en','fr']",13,"<p>Describes the work carried out by WG 4. Discusses the role and also the limitations of fire tests in reducing fire danger. The research background is briefly summarized and descriptions are given of tests under development for ignitability, spread of flame, and the production of smoke.</p>"

41073,TR,,ISO/TR 3834-6:2007,Quality requirements for fusion welding of metallic materials — Part 6: Guidelines on implementing ISO 3834,Exigences de qualité en soudage par fusion des matériaux métalliques — Partie 6: Lignes directrices pour la mise en application de l'ISO 3834,2007-02-12,1,['25.160.01'],ISO/TC 44/SC 10,9599,,"[83335,80120]","['en','fr']",21,"<p>ISO/TR 3834-6:2007 gives guidelines for the implementation of requirements given in the other parts of ISO 3834, and is intended to help manufacturers and users select that part of ISO 3834 appropriate to their needs. It is expected that they will already be familiar with ISO 3834 as a whole.</p>"

9494,TR,,ISO/TR 3888:1975,Road vehicles — Test procedure for a severe lane-change manoeuvre,Véhicules routiers — Essai de dépassement latéral brusque,1975-09-01,1,['43.020'],ISO/TC 22,9599,,[31317],"['en','fr']",6,

22497,TR,,ISO/TR 389-5:1998,Acoustics — Reference zero for the calibration of audiometric equipment — Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz,Acoustique — Zéro normal de référence pour l'étalonnage d'équipements audiométriques — Partie 5: Niveaux de référence équivalents de pression acoustique liminaire pour les sons purs dans le domaine de fréquences de 8 kHz à 16 kHz,1998-04-23,1,['13.140'],ISO/TC 43,9599,,[40535],"['en','fr']",4,

9690,TR,,ISO/TR 4011:1976,Road vehicles — Apparatus for measurement of the opacity of exhaust gas from diesel engines,Véhicules routiers — Dispositif pour le mesurage de l'opacité des gaz d'échappement des moteurs diesel,1976-06-01,1,"['13.040.50','43.180']",ISO/TC 22,9599,,[19551],"['en','fr']",17,

9859,TR,,ISO/TR 4114:1979,Road vehicles — Caravans and light trailers — Static load on ball couplings,Véhicules routiers — Caravanes et remorques légères — Charge statique sur les boules d'attelage,1979-11-01,1,['43.040.70'],ISO/TC 22,9599,,"[33482,9860]","['en','fr']",3,"<p>This Technical Report lays down the limiting values of static loads applied vertically by caravans or light trailers on ball couplings fitted to towing vehicles. Applies to caravans or light trailers for which the maximum authorized weight does not exceed 3,5 tonnes. Not applicable to unbraked trailers and twin-axle trailers.</p>"

9872,TR,,ISO/TR 4122:1977,Equipment for working the soil — Dimensions of flat disks — Type A,Matériel de travail du sol — Dimensions des disques plats — Type A,1977-06-01,1,['65.060.20'],ISO/TC 23,9599,,[9873],"['en','fr']",3,"<p>Specifies interchangeability dimensions for agricultural disks of the same type and nominal size, classified as types A, B, and C. Applies to disks as working parts of ploughs, harrows, and disk-tillers. The nominal dimensions recommended for disks in the table those given A flat disks. The figure illustrates profile and section.</p>"

9896,TR,,ISO/TR 4137:1978,Plastics — Determination of modulus of elasticity by alternating flexure,Plastiques — Détermination du module d'élasticité par flexion alternée,1978-06-01,1,['83.080.01'],ISO/TC 61/SC 2,9599,,[9895],"['en','fr']",7,"<p>This report describes a method for the determination of the longitudinal moduls of elasticity of plastics by means of Savarts pendulum. The method is applicable to products for which the characteristic determined is greater than 1500 MPa and which it is possible to prepare specimens from 1 to 5 mm in thickness by cutting. The elasticity of the test piece is employed for the transmission of energy from one pendulum to another, the test piece being used

9973,TR,,ISO/TR 4191:1989,Unplasticized polyvinyl chloride (PVC-U) pipes for water supply — Recommended practice for laying,Canalisations en polychlorure de vinyle non plastifié (PVC-U) pour l'adduction d'eau — Pratique recommandée pour la pose,1989-11-02,1,"['93.025','23.040.20','91.140.60']",ISO/TC 138/SC 2,9599,,[44039],"['en','fr']",13,

10058,TR,,ISO/TR 4250:1980,Off-the-road tyres and rims,Pneumatiques et jantes pour engins de génie civil,1980-07-01,1,['83.160.99'],ISO/TC 31/SC 6,9599,,"[10059,10063,10062]",['en'],32,

10361,TR,,ISO/TR 4467:1982,Addendum modification of the teeth of cylindrical gears for speed-reducing and speed-increasing gear pairs,Déport des dentures des roues cylindriques pour engrenages extérieurs réducteurs et multiplicateurs,1982-09-01,1,['21.200'],ISO/TC 60,9599,,"[35989,1862]","['en','fr']",12,<p>Attention is drawn to the fact that this Technical Report only regards recommendations which do not have any restrictive nature nor do they require the replacement of existing regulations which have proved their worth in the past. Applies only to external gear pairs with parallel axes of which the teeth of spur and helical gears are defined by the standard basic rack tooth profile in conf

10733,TR,,ISO/TR 4745:1978,High conductivity copper — Spiral elongation test,Cuivre de haute conductivité — Essai d'allongement spirale,1978-09-01,1,['77.040.99'],ISO/TC 26,9599,,[1707],"['en','fr']",5,

80363,TR,,ISO/TR 4804:2020,"Road vehicles — Safety and cybersecurity for automated driving systems — Design, verification and validation","Véhicules routiers — Sécurité et cybersécurité pour les systèmes de conduite automatisée — Conception, vérification et validation",2020-12-03,1,['43.020'],ISO/TC 22,9599,,[81920],['en'],111,"<p>This document describes steps for developing and validating automated driving systems based on basic safety principles derived from worldwide applicable publications. It considers safety- and cybersecurity-by-design, as well as verification and validation methods for automated driving systems focused on vehicles with level 3 and level 4 features according to SAE J3

10810,TR,,ISO/TR 4830-4:1978,Steel — Determination of low carbon contents — Part 4: Coulometric method after combustion,Acier — Dosage du carbone en faibles teneurs — Partie 4: Méthode coulométrique après combustion,1978-04-01,1,['77.080.20'],ISO/TC 17/SC 1,9599,,[22008],"['en','fr']",8,"<p>The coulometric method for the determination of low carbon contents in steels after combustion in a current of oxygen is applicable to carbon contents between 0,005 and 0,1 %. Specifies principle, reagents, apparatus, sampling, procedure, special case: carbon contents less than 0,010 % and test report.</p>"

10852,TR,,ISO/TR 4869-3:1989,Acoustics — Hearing protectors — Part 3: Simplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes,"Acoustique — Protecteurs individuels contre le bruit — Partie 3: Méthode simplifiée pour le mesurage de l'affaiblissement acoustique du type serre-tête, destinée aux contrôles de qualité",1989-11-30,1,['13.340.20'],ISO/TC 43/SC 1,9599,,[38910],"['en','fr']",7,"<p>The procedure specified may be used to investigate production spreads of performance as part of type approval or certification procedures and the change of performance with age. It is not intended to be used as the basic test for type approval purpo

10935,TR,,ISO/TR 4918:1990,Textile floor coverings — Determination of wear — Castor chair test,Revêtements de sol textiles — Détermination de l'usure — Essai à l'appareil à roulettes,1990-10-11,1,['97.150'],ISO/TC 219,9599,,"[32891,20254]","['en','fr']",3,

10965,TR,,ISO/TR 4949:1989,Steel names based on letter symbols,Désignations des aciers fondées sur des lettres symboles,1989-07-06,1,['77.080.20'],ISO/TC 17,9599,,[37676],"['en','fr']",12,<p>This Technical report of type 2 gives a survey of a designation system for steel selected for use in International Standards. This survey is intended as a base for further unification.</p>

11023,TR,,ISO/TR 5007:1980,Agricultural wheeled tractors — Operator seat — Measurement of transmitted vibration,Tracteurs agricoles à roues — Siège du conducteur — Mesurage des vibrations transmises,1980-11-01,1,"['65.060.10','13.160']",ISO/TC 23/SC 3,9599,,[11024],"['en','fr']",29,

11111,TR,,ISO/TR 5090:1977,Textiles — Methods for the removal of non-fibrous matter prior to quantitative analysis of fibre mixtures,"Textiles — Méthodes d'élimination des matières non fibreuses, préalablement à l'analyse quantitative des mélanges de fibres",1977-02-01,1,['59.060.01'],ISO/TC 38,9599,,[40561],"['en','fr']",7,"<p>Describes procedures for the removal of certain commonly found types of non-fibrous substances from fibres. Fibres to which the procedures are applicable and those to which they are not applicable are listed in the table, in relation to the non-fibrous substances to be removed. The names of these fibres are defined in ISO 2076.</p>"

11172,TR,,ISO/TR 5168:1998,Measurement of fluid flow — Evaluation of uncertainties,Mesure de débit des fluides — Calcul de l'incertitude,1998-03-26,1,['17.120.10'],ISO/TC 30,9599,[11171],[32199],"['en','fr']",68,

11230,TR,,ISO/TR 5232:1979,Textile machinery and accessories — Graphic symbols for indicator plates on textile machinery,Matériel pour l'industrie textile — Symboles graphiques pour les plaques indicatrices sur les machines textiles,1979-12-01,1,"['59.120.01','01.080.20']",ISO/TC 72,9599,,[11231],"['en','fr']",41,

20737,TR,,ISO/TR 5658-1:1997,Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread,Essais de réaction au feu — Propagation du feu — Partie 1: Guide sur la propagation de la flamme,1997-12-18,1,['13.220.50'],ISO/TC 92/SC 1,9599,,[36962],['en'],20,

20404,TR,,ISO/TR 5659-3:1999,Plastics — Smoke generation — Part 3: Determination of optical density by a dynamic-flow method,Plastiques — Production de fumée — Partie 3: Détermination de la densité optique par une méthode dynamique,1999-09-23,1,"['83.080.01','13.220.40']",ISO/TC 61/SC 4,9599,,[55635],"['en','fr']",18,

38322,TR,,ISO/TR 5660-3:2003,"Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement","Essais de réaction au feu — Débit calorifique, taux de dégagement de fumée et taux de perte de masse — Partie 3: Lignes directrices relatives au mesurage",2003-11-25,1,['13.220.50'],ISO/TC 92/SC 1,9599,,[54583],['en'],33,"<p>ISO/TR 5660-3:2003 examines the limitations of the cone calorimeter as currently used for building products and recommends ways in which some of these may be overcome for other types of products for other application areas. It compiles information from a large body of experience with regard to the use of the instrument into a set of

12118,TR,,ISO/TR 5924:1989,Fire tests — Reaction to fire — Smoke generated by building products (dual-chamber test),Essais au feu — Réaction au feu — Fumée générée par les produits de bâtiment (essai en chambre double),1989-09-07,1,['13.220.50'],ISO/TC 92/SC 1,9599,,[12119],"['en','fr']",32,"<p>Lays down a method of test for examining the smoke production behaviour of the exposed surface of specimens of essentially flat materials, composites or assemblies not exceeding 70 mm in thickness, when placed in a horizontal orientation and subjected to specified levels of thermal irradiance. Includes definitions.</p>"

12120,TR,,ISO/TR 5925-2:1997,Fire tests — Smoke control door and shutter assemblies — Part 2: Commentary on test method and test data application,Essais au feu — Assemblages porte et volet pare-fumée — Partie 2: Commentaires sur la méthode d'essai et l'application des données de l'essai,1997-10-02,1,"['13.220.50','91.060.50']",ISO/TC 92/SC 2,9599,,[39802],"['en','fr']",9,

39802,TR,,ISO/TR 5925-2:2006,Fire tests — Smoke-control door and shutter assemblies — Part 2: Commentary on test method and the applicability of test conditions and the use of test data in a smoke containment strategy,Essais au feu — Assemblages porte et volet pare-fumée — Partie 2: Commentaires sur la méthode d'essai et applicabilité des conditions d'essai et emploi des données d'essai dans une stratégie de confinement de la fumée,2006-07-06,2,"['13.220.50','13.220.20','91.060.50']",ISO/TC 92/SC 2,9599,[12120],[89416],['en'],12,"<p>ISO/TR 5925-2:2006 provides a commentary that explains the general philosophy and factors on which the test specified in Part 1 of ISO 5925 has been designed, to

12555,TR,,ISO/TR 6272:1979,Paints and varnishes — Falling weight test,Peintures et vernis — Essai de chute d'une masse,1979-09-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[12556],['en'],5,

82158,TR,,ISO/TR 6277:2024,Blockchain and distributed ledger technologies — Data flow models for blockchain and DLT use cases,Technologies des chaînes de blocs et technologies de registre distribué - Modèles de flux de données pour les chaînes de blocs et les cas d'utilisation de DLT,2024-02-23,1,"['35.030','35.240.40','35.240.99']",ISO/TC 307,9599,,[90434],['en'],49,"<p class='MsoBodyText'><span lang='EN-GB'>This document uses a set of models that describe the flows of different types of data between distributed ledger technologies (DLT) and related systems, as well as between different DLT nodes.</span></p><p class='MsoBodyText'><span lang='EN-GB'>It provides a descriptive analysis of data

12563,TR,,ISO/TR 6281:1990,Plain bearings — Testing under conditions of hydrodynamic and mixed lubrication in test rigs — Guidelines,Paliers lisses — Essai des paliers lisses dans les conditions de lubrification hydrodynamique et mixte dans des machines d'essai pour paliers — Principes directeurs,1990-04-12,1,['21.100.10'],ISO/TC 123/SC 2,9599,,[36808],"['en','fr']",11,

12564,TR,,ISO/TR 6282:1979,Withdrawal of ISO/TR 6282-1979,Annulation de l'ISO/TR 6282-1979,1979-05-01,1,['21.100.10'],ISO/TC 123,9599,,[12565],['en'],5,

12569,TR,,ISO/TR 6285:1980,Pipes and fittings of acrylonitrile/butadiene/ styrene terpolymer (ABS) — Chemical resistance with respect to fluids,Tubes et raccords en terpolymère acrylonitrile/ butadiène/styrène (ABS) — Résistance chimique vis-à-vis des fluides,1980-10-01,1,"['23.040.45','23.040.20']",ISO/TC 138,9599,,[18415],"['en','fr']",7,

73531,TR,,ISO/TR 6336-30:2017,"Calculation of load capacity of spur and helical gears — Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5","Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale — Partie 30: Exemples d'application de l'ISO 6336 parties 1, 2, 3, 5",2017-11-23,1,['21.200'],ISO/TC 60/SC 2,9599,,[84147],"['en','fr']",60,"<p>ISO/TR 6336-30:2017 presents worked examples that apply exclusively the approximation methods for the determination of specific influential factors, such as the dynamic factor, Kv, and the load distributions factors KHα, KHβ, etc., where full analytical calculation procedures are provided within

12662,TR,,ISO/TR 6356:1982,Textile floor coverings — Assessment of static electrical propensity — 'Walking' test,Revêtements de sol textiles — Évaluation de la propension à l'accumulation de charges électrostatiques — Essai du 'marcheur',1982-10-01,1,['97.150'],ISO/TC 219,9599,,[12663],"['en','fr']",14,

12937,TR,,ISO/TR 6543:1979,The development of tests for measuring toxic hazards in fire,Élaboration d'essais de mesurage des risques d'intoxication par le feu,1979-11-01,1,['13.220.50'],ISO/TC 92,9599,,[16717],"['en','fr']",8,

12940,TR,,ISO/TR 6546:1979,Road vehicles — Information core appropriate to the field study of accidents in which seat belts are used,Véhicules routiers — Noyau d'information relatif à l'étude in situ d'accidents dans lesquels des ceintures de sécurité sont utilisées,1979-05-01,1,['43.020'],ISO/TC 22,9599,,"[38575,22194]","['en','fr']",4,"<p>This Technical Report specifies information necessary for the study of accidents to vehicle occupants wearing seat belts. This 'information core' has been designed to be appropriate to in-situ accident investigation techniques. Contains information to be given concerning: the vehicle, details of the restraint system, each seating position in car fitted wi

12990,TR,,ISO/TR 6585:1979,Fire hazard and the design and use of fire tests,Risque d'incendie et conception et utilisation des essais au feu,1979-10-01,1,['13.220.40'],ISO/TC 92,9599,,[9358],"['en','fr']",17,

13039,TR,,ISO/TR 6622-2:1988,Internal combustion engines — Piston rings — Part 2: Rectangular rings with narrow ring width,Moteurs à combustion interne — Segments de piston — Partie 2: Segments rectangulaires de section réduite,1988-12-29,1,['43.060.10'],ISO/TC 22,9599,,"[26898,38358]","['en','fr']",14,"<p>This Technical Report specifies the essential dimensional features of R-, B- and M-rectangular piston ring types with narrow ring width. Dimension tables 8 and 9 allow for the use of cast iron (table 8) or steel (table 9). The requirements of this Technical Report apply to rectangular rings for reciprocating internal combustion piston engines, up to and including 90 mm diameter for cast ir

13042,TR,,ISO/TR 6624-2:1988,Internal combustion engines — Piston rings — Part 2: Half keystone rings,Moteurs à combustion interne — Segments de piston — Partie 2: Segments demi-trapézoïdaux,1988-12-29,1,['43.060.10'],ISO/TC 22,9599,,"[26901,38357]","['en','fr']",10,"<p>This Technical Report specifies the essential dimensional features of HK- and HKB-half keystone ring types with narrow ring width. Dimension tables 6 and 7 allow for the use of cast iron (table 6) or steel (table 7). The requirements of this Technical Report apply to half keystone rings for reciprocating internal combustion piston engines, up to and including 70 mm diameter for cast iron rings and up to and including 100 mm d

13045,TR,,ISO/TR 6627:1992,Internal combustion engines — Piston rings — Expander/segment oil control rings,Moteurs à combustion interne — Segments de piston — Segments racleurs régulateurs d'huile/expandeurs,1992-02-06,1,['43.060.10'],ISO/TC 22,9599,,[26902],"['en','fr']",6,

13202,TR,,ISO/TR 6741-4:1987,Textiles — Fibres and yarns — Determination of commercial mass of consignments — Part 4: Values used for the commercial allowances and the commercial moisture regains,Textiles — Fibres et fils — Détermination de la masse commerciale d'un lot — Partie 4: Valeurs utilisées pour les taux commerciaux de conditionnement et pour les taux commerciaux de reprise d'humidité,1987-04-09,1,"['59.080.20','59.060.01']",ISO/TC 38/SC 23,9599,,[45519],"['en','fr']",6,"<p>The values for the commercial allowances and commercial moisture regains, which are arbitrary figures to be formally agreed between the interested parties, are only applicable for this purpose, and when used in c

75438,TR,,ISO/TR 6750-2:2020,Earth-moving machinery — Operator's manual — Part 2: List of references,Engins de terrassement — Manuel de l'opérateur — Partie 2: Liste de références,2020-01-29,1,['53.100'],ISO/TC 127/SC 3,9599,[29209],[82234],"['en','fr']",4,"<p>This document provides a list of standards, referenced in ISO 20474-1 and EN 474-1, that include requirements for information to be included in the operator's manual. This list of standards is being provided as guidance in creating operator's manuals.</p>"

82234,TR,,ISO/TR 6750-2:2021,Earth-moving machinery — Operator's manual — Part 2: List of references,Engins de terrassement — Manuel de l'opérateur — Partie 2: Liste de références,2021-05-18,2,['53.100'],ISO/TC 127/SC 3,9599,[75438],[84186],"['en','fr']",4,"<p>This document provides a list of standards, referenced in ISO 20474-1 and EN 474-1, that include requirements for information to be included in the operator’s manual. This list of standards is being provided as guidance in creating operator’s manuals.</p>"

84186,TR,,ISO/TR 6750-2:2022,Earth-moving machinery — Operator's manual — Part 2: List of references,Engins de terrassement — Manuel de l'opérateur — Partie 2: Liste de références,2022-09-23,3,['53.100'],ISO/TC 127/SC 3,9599,[82234],[87516],"['en','fr']",4,"<p>This document provides a list of standards, referenced in ISO 20474-1 and EN 474-1, that include requirements for information to be included in the operator’s manual. This list of standards is being provided as guidance in creating operator’s manuals.</p>"

87516,TR,,ISO/TR 6750-2:2024,Earth-moving machinery — Operator's manual — Part 2: List of references,Engins de terrassement — Manuel de l'opérateur — Partie 2: Liste de références,2024-01-31,4,['53.100'],ISO/TC 127/SC 3,9599,[84186],[91481],"['en','fr']",4,"<p class='MsoBodyText'><span lang='EN-GB'>This document provides a list of standard deliverables, containing provisions for information to be included in the operator’s manual.</span></p><p class='MsoBodyText'><span lang='EN-GB'>This document applies to earth-moving machinery as defined in ISO 6165.</span></p><p class='MsoBodyText'><span lang='EN-GB'>The list of standard deliverables is being provided as guidance in creating operator´s ma

13549,TR,,ISO/TR 6987-3:1990,"Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 3: V-shape inserts",Plaquettes amovibles pour outils coupants — Plaquettes en métaux-durs (carbures métalliques) avec arrondi de pointe et trou de fixation partiellement cylindrique — Partie 3: Plaquettes de forme V,1990-12-13,1,['25.100.01'],ISO/TC 29/SC 9,9599,,"[24628,29005]","['en','fr']",5,

13581,TR,,ISO/TR 7024:1985,Above-ground drainage — Recommended practice and techniques for the installation of unplasticized polyvinyl chloride (PVC-U) sanitary pipework for above-ground systems inside buildings,Évacuation au-dessus du sol — Techniques et mise en oeuvre recommandées pour l'installation des canalisations d'évacuation en polychlorure de vinyle non plastifié (PVC-U) dans les systèmes placés au-dessus du sol à l'intérieur des bâtiments,1985-01-17,3,"['91.140.80','23.040.20']",ISO/TC 138/SC 1,9599,,"[32985,25661]","['en','fr']",37,"<p>A guide is given to PVC-U-pipework, illustrated by many figures and drawings, in following items: definitions, symbols and glossary of terms, class

13636,TR,,ISO/TR 7066-1:1997,Assessment of uncertainty in calibration and use of flow measurement devices — Part 1: Linear calibration relationships,Évaluation de l'incertitude dans l'étalonnage et l'utilisation des appareils de mesure du débit — Partie 1: Relations d'étalonnage linéaires,1997-02-06,1,['17.120.01'],ISO/TC 30,9599,[13635],"[32200,57813]","['en','fr']",28,"<p>Describes the procedures to be used in deriving the calibration curve for methods of measuring the flowrate in closed conduits or open channels, and for assessing the uncertainty associated with such calibrations. Replaces the first edition published as an International Standard (ISO 7066-1).</p>"

13644,TR,,ISO/TR 7073:1988,Recommended techniques for the installation of unplasticized poly(vinyl chloride) (PVC-U) buried drains and sewers,Techniques recommandées pour la mise en place des canalisations d'assainissement enterrées en polychlorure de vinyle non plastifié (PVC-U),1988-07-07,2,"['93.030','91.140.80','23.040.20']",ISO/TC 138/SC 1,9599,,[26234],"['en','fr']",21,"<p>Includes recommendations concerning installation of PVC-U-pipes and fittings up to 630 mm diameter, trenchwork, pipe laying and backfilling, maintenance and repair, as well as transport, storage and handling of pipes. Reference is made to International Standards and national requirements.</p>"

13739,TR,,ISO/TR 7147:1985,Plain bearings — Testing of the tribological behaviour of plastics,Paliers lisses — Essai du comportement tribologique des plastiques,1985-12-19,1,['21.100.10'],ISO/TC 123/SC 2,9599,,[20994],"['en','fr']",10,

13793,TR,,ISO/TR 7178:1983,Liquid flow measurement in open channels — Velocity-area methods — Investigation of total error,Mesure du débit des liquides dans les canaux découverts — Méthode d'exploration du champ des vitesses — Recherche de l'erreur globale,1983-07-01,1,['17.120.20'],ISO/TC 113/SC 1,9599,,[37096],"['en','fr']",27,"<p>Summarizes the results of investigations of the total error in measurements of flow by velocity-area methods. Describes the procedure used and types of errors (section one), and gives recommendation for the collection of data for investigations of errors (section two) with a view to supplementing the information given in ISO 1088.</p>"

13884,TR,,ISO/TR 7239:1984,Development and principles for application of public information symbols,Élaboration et principes de mise en oeuvre des pictogrammes destinés à l'information du public,1984-12-01,1,['01.080.10'],ISO/TC 145/SC 1,9599,,"[32346,23668]","['en','fr']",19,<p>Provides a set of recommended procedures to be followed and sets forth the essential technical criteria which should be taken into account when developing or considering the use of graphical symbols as a means of visual pictorial communication. Applies mainly to public areas. Includes terms and definitions.</p>

36121,TR,,ISO/TR 7240-14:2003,"Fire detection and alarm systems — Part 14: Guidelines for drafting codes of practice for design, installation and use of fire detection and fire alarm systems in and around buildings","Systèmes de détection d'incendie et d'alarme — Partie 14: Lignes directrices pour la rédaction des codes de pratique pour la conception, l'installation et l'utilisation des systèmes de détection d'incendie et d'alarme à l'intérieur et autour des bâtiments",2003-10-22,1,['13.220.20'],ISO/TC 21/SC 3,9599,,[57982],['en'],9,"<p>ISO/TR 7240-14:2003 is intended to be used as a general guideline for the preparation of a code of practice for the design, installation and use of a fire de

41249,TR,,ISO/TR 7250-2:2010,Basic human body measurements for technological design — Part 2: Statistical summaries of body measurements from national populations,Définitions des mesures de base du corps humain pour la conception technologique — Partie 2: Résumés statistiques des mesurages du corps de populations nationales,2010-02-12,1,['13.180'],ISO/TC 159/SC 3,9599,,[84822],"['en','fr','ru']",53,"<p>ISO/TR 7250-2:2010 provides statistical summaries of body measurements together with database background information for working age people in the national populations of individual ISO member bodies. The data are intended for use in conjunction with ISO standards for equipment design and safe

62899,TR,Amd,ISO/TR 7250-2:2010/Amd 1:2013,Basic human body measurements for technological design — Part 2: Statistical summaries of body measurements from national populations — Amendment 1,Définitions des mesures de base du corps humain pour la conception technologique — Partie 2: Résumés statistiques des mesurages du corps de populations nationales — Amendement 1,2013-04-11,1,['13.180'],ISO/TC 159/SC 3,9599,,[84822],"['en','ru']",7,

14133,TR,,ISO/TR 7405:1984,Biological evaluation of dental materials,Évaluation biologique des produits dentaires,1984-01-01,1,"['11.100','11.060.10']",ISO/TC 106,9599,,[14134],"['en','fr']",54,