Withdrawn and superseded ISO standards — page 227 of 246

39109,TR,,ISO/TR 15608:2005,Welding — Guidelines for a metallic materials grouping system,Soudage — Lignes directrices pour un système de groupement des matériaux métalliques,2005-10-19,2,['25.160.01'],ISO/TC 44/SC 10,9599,[28389],[57925],"['en','fr']",6,"<p>ISO/TR 15608:2005 provides a uniform system for grouping of materials for welding purposes. It may also apply to other purposes such as heat treatment, forming, non-destructive testing.</p><p>It covers grouping systems for the following standardized materials:</p><ul><li>steel;</li><li>aluminium and its alloys;</li><li>nickel and its alloys;</li><li>copper and its alloys;</li><li>titanium and its alloys;</li><li>zirconium and its alloys;

57925,TR,,ISO/TR 15608:2013,Welding — Guidelines for a metallic materials grouping system,Soudage — Lignes directrices pour un système de groupement des matériaux métalliques,2013-03-20,3,['25.160.01'],ISO/TC 44/SC 10,9599,[39109],[65667],"['en','fr']",7,"<p>ISO/TR 15608:2013 provides a uniform system for the grouping of materials for welding purposes. It can also apply to other purposes, such as heat treatment, forming and non-destructive testing.</p><p>ISO/TR 15608:2013 covers grouping systems for the following standardized materials:</p><ul><li>steels;</li><li>aluminium and its alloys;</li><li>copper and its alloys;</li><li>nickel and its alloys;</li><li>titanium and its alloys;</li><li>z

65667,TR,,ISO/TR 15608:2017,Welding — Guidelines for a metallic materials grouping system,Soudage — Lignes directrices pour un système de groupement des matériaux métalliques,2017-02-01,4,['25.160.01'],ISO/TC 44/SC 10,9599,[57925],[88796],"['en','fr']",7,"<p>ISO/TR 15608:2017 provides guidelines for a uniform system for grouping materials for welding purposes. It can also be applied for other purposes, such as heat treatment, forming and non-destructive testing.</p><p>It covers grouping systems for the following standardized materials:</p><p>? steels;</p><p>? aluminium and its alloys;</p><p>? copper and its alloys;</p><p>? nickel and its alloys;</p><p>? titanium and its alloys;</p>

37516,TR,,ISO/TR 15655:2003,Fire resistance — Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design,Résistance au feu —Essais des propriétés thermophysiques et mécaniques des matériaux aux températures élevées pour la conception de l'ingénierie contre l'incendie,2003-03-28,1,['13.220.40'],ISO/TC 92/SC 2,9599,,[63506],['en'],46,"<p>ISO/TR 15655:2003 identifies test methods already in existence and provides guidance on those that need to be developed to characterize the thermo-physical and mechanical properties of structural materials at elevated temperatures for use in fire safety engineering calculations. </p><p>It is

29093,TR,,ISO/TR 15801:2004,Electronic imaging — Information stored electronically — Recommendations for trustworthiness and reliability,Images électroniques — Stockage électronique d'informations — Recommandations pour les informations de valeur et leur fiabilité,2004-01-16,1,['37.080'],ISO/TC 171,9599,,[50499],['en'],39,"<p>ISO 15801:2004 describes the implementation and operation of information management systems which store information electronically and where the issues of trustworthiness, reliability, authenticity and integrity are important. The whole life cycle of a stored electronic document is covered, from initial capture to eventual destruction.</p><p>ISO 15801:2004 is for use wi

50499,TR,,ISO/TR 15801:2009,Document management — Information stored electronically — Recommendations for trustworthiness and reliability,Images électroniques — Stockage électronique d'informations — Recommandations pour les informations de valeur et leur fiabilité,2009-10-09,2,['37.080'],ISO/TC 171/SC 1,9599,[29093],[66856],['en'],41,"<p>ISO/TR 15801:2009 describes the implementation and operation of document management systems that can be considered to store electronic information in a trustworthy and reliable manner.</p><p>ISO/TR 15801:2009 is for use by any organization that uses a document management system to store authentic, reliable and usable/readable electronic information over tim

66856,TR,,ISO/TR 15801:2017,Document management — Electronically stored information — Recommendations for trustworthiness and reliability,Gestion de document — Information stockée électroniquement — Recommandations pour contribuer à l'intégrité et à la fiabilité des informations stockées,2017-05-17,3,['37.080'],ISO/TC 171/SC 1,9599,[50499],"[83113,86917]",['en'],44,"<p>ISO/TR 15801:2017 describes the implementation and operation of information management systems that store and make available for use electronically stored information (ESI) in a trustworthy and reliable manner. Such ESI can be of any type, including 'page based' information, information in databases and audio/video information

28832,TR,,ISO/TR 15855:2001,"Copper, lead and zinc sulfide concentrates — Step-by-step procedure for the testing of static scales","Concentrés sulfurés de cuivre, de plomb et de zinc — Procédure pas à pas pour les essais des bascules statiques",2001-08-09,1,['73.060.99'],ISO/TC 183,9599,,[81610],['en'],3,"<p>This Technical Report outlines simple procedures to check the performance and calibration status of static scales.</p><p>The test sequence is intended for routine applications, generating results which can be used to calculate explicit</p><p>scale performance parameters (precision, bias and linearity) in accordance with the relevant equations shown in</p><p>ISO 12745, <i>Copper, lead and

29145,TR,,ISO/TR 15916:2004,Basic considerations for the safety of hydrogen systems,Considérations fondamentales pour la sécurité des systèmes à l'hydrogène,2004-02-11,1,"['71.020','71.100.20']",ISO/TC 197,9599,,[56546],"['en','fr']",61,"<p>ISO/TR 15916:2004 provides guidelines for the use of hydrogen in its gaseous and liquid forms. It identifies the basic safety concerns and risks, and describes the properties of hydrogen that are relevant to safety. Detailed safety requirements associated with specific hydrogen applications are treated in separate International Standards.</p>"

56546,TR,,ISO/TR 15916:2015,Basic considerations for the safety of hydrogen systems,Considérations fondamentales pour la sécurité des systèmes à l'hydrogène,2015-12-03,2,"['71.020','71.100.20']",ISO/TC 197,9599,[29145],"[80591,89423]",['en'],62,"<p>ISO/TR 15916:2015 provides guidelines for the use of hydrogen in its gaseous and liquid forms as well as its storage in either of these or other forms (hydrides). It identifies the basic safety concerns, hazards and risks, and describes the properties of hydrogen that are relevant to safety. Detailed safety requirements associated with specific hydrogen applications are treated in separate International Standards.</p><p>'Hydrogen' in this paper me

28872,TR,,ISO/TR 15969:2001,Surface chemical analysis — Depth profiling — Measurement of sputtered depth,Analyse chimique des surfaces — Profilage d'épaisseur — Mesurage de l'épaisseur bombardée,2001-05-31,1,['71.040.40'],ISO/TC 201/SC 4,9599,,[80118],['en'],12,<p>This Technical Report gives guidelines for measuring the sputtered depth in sputtered depth profiling. The methods</p><p>of sputtered depth measurement described in this Technical Report are applicable to techniques of surface</p><p>chemical analysis when used in combination with ion bombardment for the removal of a part of a solid sample to a</p><p>typical sputtered depth of up to severalmicrometres.</p>

30163,TR,,ISO/TR 16142:1999,Medical devices — Guidance on the selection of standards in support of recognized essential principles of safety and performance of medical devices,Dispositifs médicaux — Lignes directrices pour le choix des normes correspondant aux principes essentiels reconnus de sécurité et de performance des dispositifs médicaux,1999-12-16,1,['11.040.01'],ISO/TC 210,9599,,[38401],"['en','fr']",20,

38401,TR,,ISO/TR 16142:2006,Medical devices — Guidance on the selection of standards in support of recognized essential principles of safety and performance of medical devices,Dispositifs médicaux — Lignes directrices pour le choix des normes correspondant aux principes essentiels reconnus de sécurité et de performance des dispositifs médicaux,2006-01-13,2,['11.040.01'],ISO/TC 210,9599,[30163],"[63939,61174]","['en','fr','ru']",17,"<p>ISO/TR 16142:2006 considers and identifies certain significant standards and guides that can be useful in the assessment of conformity of medical devices with recognized essential principles of safety and performance.</p><p>ISO/TR 16142:2006 is intended for use

37767,TR,,ISO/TR 16153:2004,Piston-operated volumetric instruments — Determination of uncertainty for volume measurements made using the photometric method,Instruments volumétriques actionnés par piston — Détermination de l'incertitude de mesure pour les mesurages volumétriques au moyen de la méthode photométrique,2004-10-07,1,['17.060'],ISO/TC 48,9599,,[68802],"['en','fr']",28,<p>ISO/TR 16153:2004 gives the detailed evaluation of uncertainty for volume measurements according to the <i>Guide to the expression of uncertainty in measurements</i> (GUM). ISO 8655-7 covers non-gravimetric methods of volume measurement. Annex A of ISO 8655-7 presents the details of a method that employs removable

55739,TR,,ISO/TR 16158:2013,Space systems — Avoiding collisions with orbiting objects,Systèmes spatiaux — Évitement des collisions avec les objets en orbite,2013-11-26,1,['49.140'],ISO/TC 20/SC 14,9599,,[81695],"['en','ru']",17,"<p>ISO/TR 16158:2013 is a guide for establishing essential collaborative enterprises to sustain the space environment and employ it effectively. This requires diligent collaboration among all who operate satellites.</p><p>ISO/TR 16158:2013 describes some widely used techniques for perceiving close approaches, estimating collision probability, estimating the cumulative probability of survival, and manoeuvring to avoid collisions.</p>"

55801,TR,,ISO/TR 16178:2010,Footwear — Critical substances potentially present in footwear and footwear components,Chaussures — Substances critiques potentiellement présentes dans la chaussure et les composants de chaussures,2010-09-03,1,['61.060'],ISO/TC 216,9599,,[57945],"['en','fr']",41,"<p>ISO/TR 16178:2010 establishes a list of critical chemical substances potentially present in footwear and footwear components.</p><p>ISO/TR 16178:2010 describes the critical chemical substances, their potential risks, in which materials they could be found, and which test method(s) can be used to quantify them. It does not include requirements; it is the responsibility of the user of ISO/TR 16178:2010 t

57945,TR,,ISO/TR 16178:2012,Footwear — Critical substances potentially present in footwear and footwear components,Chaussures — Substances critiques potentiellement présentes dans la chaussure et les composants de chaussures,2012-07-11,2,['61.060'],ISO/TC 216,9599,[55801],[69809],"['en','fr']",41,"<p>This Technical Report establishes a list of critical chemical substances potentially present in footwear and footwear components.</p><p>This Technical Report describes the critical chemical substances, their potential risks, the materials in which they can be found and the test method(s) which can be used to quantify them. It does not include requirements; it is the responsibility of the user of

55857,TR,,ISO/TR 16203:2016,Corrosion of metals and alloys — Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids,Corrosion des métaux et alliages — Lignes directrices pour la sélection de méthodes d'essai de corrosion-érosion en l'absence de particules dans des liquides en mouvement,2016-07-15,1,['77.060'],ISO/TC 156,9599,,[83252],"['en','fr']",8,<p>ISO/TR 16203:2016 provides information on the erosion corrosion test of materials in single-phase flowing liquids and guidance for selection of test methods.</p>

76632,TR,,ISO/TR 16219:2020,Fans — System effects and system effect factors,Ventilateurs — Effet système et facteurs d’effet système,2020-09-07,1,['23.120'],ISO/TC 117,9599,,[87617],"['en','fr']",83,"<p>This document deals with the likely degradation of air performance of fans tested in standardized airways in accordance with ISO 5801 when compared with the performance of fans tested under actual site conditions. It deals with the performance of a number of generic types of fan and fittings. The results given are intended as guidelines and only provide trends, as the system effect depends on the exact geometry of the fan and disturbing component.</p><p>The test data presented in this documen

55922,TR,,ISO/TR 16224:2012,Technical aspects of nut design,Aspects techniques de conception des écrous,2012-03-29,1,['21.060.20'],ISO/TC 2/SC 12,9599,,[84884],['en'],15,"<p>This Technical Report gives information concerning the design criteria for nuts specified in ISO 898-2 so that, under static tensile overload, the stripping fracture mode is prevented.</p><p>The design criteria are also applicable to non-standardized nuts or internally threaded elements with ISO metric screw threads (in accordance with ISO 68-1) mating with bolts. However, dimensional factors such as the width across flats or other features related to rigidity of nuts, and thread tolerances can affect the load ability of

42993,TR,,ISO/TR 16312-2:2007,Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment — Part 2: Evaluation of individual physical fire models,Lignes directrices pour évaluer la validité des modèles de feu physiques pour l'obtention de données sur les effluents du feu en vue de l'évaluation des risques et dangers — Partie 2: Évaluation des différents modèles de feu physiques,2007-03-01,1,['13.220.99'],ISO/TC 92/SC 3,9599,,[75722],['en'],34,"<p>ISO/TR 16312-2:2007 assesses the utility of physical fire models that have been standardized, are commonly used and/or are cited in national or international standards, fo

56225,TR,,ISO/TR 16344:2012,"Energy performance of buildings — Common terms, definitions and symbols for the overall energy performance rating and certification","Performance énergétique des bâtiments — Termes, définitions et symboles communes pour l'évaluation de la performance et la certification énergétique",2012-10-12,1,['91.120.10'],ISO/TC 163,9599,[51941],[65601],['en'],40,"<p>ISO/TR 16344:2012 provides a coherent set of terms, definitions and symbols for concepts and physical quantities related to the overall energy performance of buildings and its components, including definitions of system boundaries, to be used in all standards elaborated within ISO on energy performance of buildin

30945,TR,,ISO/TR 16386:1999,Impact of changes in ISO fluid power particle counting — Contamination control and filter test standards,Conséquences des changements survenus dans les normes ISO relatives au comptage des particules — Contrôle de la contamination et essais de filtres,1999-12-16,1,['23.100.60'],ISO/TC 131/SC 6,9599,,[59488],"['en','fr']",11,

56814,TR,,ISO/TR 16475:2011,Guidelines for the repair of water-leakage cracks in concrete structures,Lignes directrices pour la réparation des fissures dues à l'eau dans les structures en béton,2011-08-02,1,['91.080.40'],ISO/TC 71/SC 7,9599,,[74723],"['en','fr']",15,<p>ISO/TR 16475 gives guidelines for the selection of a proper grout material to repair water leakage through cracks and other discontinuities in concrete structures including the following:</p><ul><li>conditions of water-leakage cracks;</li><li>performance requirements for repair materials;</li><li>different types of repair materials (grouts);</li><li>procedures followed to select the appropriate repair materials;</li><li>execut

30442,TR,,ISO/TR 16765:2003,Comparison of worldwide safety standards on lifts for firefighters,Comparaison des normes de sécurité sur le plan mondial relatives à la lutte contre l'incendie dans les ascenseurs,2003-01-09,1,['91.140.90'],ISO/TC 178,9599,,"[74750,64025]",['en'],40,"<p>ISO/TR16765:2003 consists of a comparison of the requirements of selected topics as covered by standards in use in the following parts of the world:</p><p>Europe, Australia, Russia, Japan, USA, Canada, China, Hong Kong, India, Korea, Malaysia, New Zealand, Singapore, Taiwan.</p><p>This Technical Report applies to electric traction lifts only, although some sections may also be applicable for positive drive lifts a

38891,TR,Cor,ISO/TR 16765:2003/Cor 1:2003,Comparison of worldwide safety standards on lifts for firefighters — Technical Corrigendum 1,Comparaison des normes de sécurité sur le plan mondial relatives à la lutte contre l'incendie dans les ascenseurs — Rectificatif technique 1,2003-07-24,1,['91.140.90'],ISO/TC 178,9599,,"[74750,64025]",['en'],1,

57082,TR,,ISO/TR 16922:2013,Natural gas — Odorization,Gaz naturel — Odorisation,2013-11-06,1,['75.060'],ISO/TC 193,9599,[31135],"[80964,83835]","['en','fr']",10,"<p>ISO/TR 16922 gives the specifications and guidelines for the methods to be used in the odorization of natural gas under a safety point of view.</p><p>ISO/TR 16922 also specifies the principles for the odorization technique (including handling and storage of odorants) and the control of odorization of natural gas.</p><p>ISO/TR 16922 does not cover odorization of gas supply with gases other than natural gas.</p><p>NOTE The general requirements for odorants, and the physical and chemical properties of commonly used odorants are

58087,TR,,ISO/TR 17068:2012,Information and documentation - Trusted third party repository for digital records,Information et documentation — Référentiel tiers de confiance pour les enregistrements électroniques,2012-10-22,1,['01.140.20'],ISO/TC 46/SC 11,9599,,[66760],['en'],31,"<p>ISO/TR 17068:2012 details the authorized custody services of a Trusted Third Party Repository (TTPR) in order to ensure provable integrity and authenticity of the clients' digital records and serve as a source of reliable evidence.</p><p>It describes the services and processes to be provided by a TTPR for the clients' digital records during the retention period, to ensure trust. It also details the criteria of 'tr

35535,TR,,ISO/TR 17165-2:2006,Hydraulic fluid power — Hose assemblies — Part 2: Recommended practices for hydraulic hose assemblies,Transmissions hydrauliques — Flexibles de raccordement — Partie 2: Pratiques recommandées pour les flexibles de raccordement hydrauliques,2006-09-14,1,['23.040.70'],ISO/TC 131/SC 4,9599,,[55651],"['en','fr']",20,"<p>ISO 17165-2:2006 provides guidelines for selection, routing, fabrication, installation, replacement, maintenance and storage of hose and hose assemblies for hydraulic fluid power systems that are manufactured from hoses conforming to ISO 1436-1, ISO 1436-2, ISO 3862-1, ISO 3862-2, ISO 3949, ISO 4079-1, ISO 4079-2, ISO 11237-1 and ISO 11237-2, and hos

44692,TR,,ISO/TR 17252:2008,Fire tests — Applicability of reaction to fire tests to fire modelling and fire safety engineering,Essais au feu — Applicabilité des résultats de l'essai de réaction au feu aux techniques de modélisation et de sécurité contre l'incendie,2008-12-01,1,"['13.220.40','13.220.50']",ISO/TC 92/SC 1,9599,,"[67884,59896]",['en'],52,<p>ISO/TR 17252 gives guidelines on the applicability of the existing reaction to fire tests to fire safety engineering and fire modelling. It also gives general guidance on the type of data needed for fire safety engineering calculations and for fire modelling.</p>

33037,TR,,ISO/TR 17400:2003,"Space systems — Space launch complexes, integration sites and other facilities — General testing guidelines","Systèmes spatiaux — Complexes de lancement spatial, sites d'intégration et autres installations — Lignes directrices pour les essais",2003-02-10,1,['49.140'],ISO/TC 20/SC 14,9599,,[74190],['en'],23,"<p>ISO/TR 17400:2003 is applicable to new projects and programs and to redesigned and upgraded launch pad and integration sites. ISO/TR 17400:2003 establishes the testing phases, goals, and general aspects for launch space complexes and complexes for assembly and tests of a vehicle and spacecraft and the associated equipment that, after successful testing, wil

30003,TR,,ISO/TR 17663:2001,Welding — Guidelines for quality requirements for heat treatment in connection with welding and allied processes,Soudage — Lignes directrices concernant les exigences de qualité relatives au traitement thermique en soudage et techniques connexes,2001-03-22,1,['25.160.01'],ISO/TC 44/SC 10,9599,,[43498],"['en','fr']",10,

44080,TR,,ISO/TR 17737:2007,Workplace air — Guidelines for selecting analytical methods for sampling and analysing isocyanates in air,Atmosphères des lieux de travail — Lignes directrices pour la sélection des méthodes analytiques d'échantillonnage et d'analyses des isocyanates dans l'air,2007-03-28,1,['13.040.30'],ISO/TC 146/SC 2,9599,,[57579],['en'],9,"<p>ISO/TR 17737:2007 provides guidelines which are intended to provide industrial hygienists, employers and workers with a broad overview of isocyanates, their uses in industry, methods of measurement and guidance on choosing the appropriate sampling strategy. This document discusses areas of concern to alert the industrial hygienist, employ

61521,TR,,ISO/TR 18128:2014,Information and documentation — Risk assessment for records processes and systems,Information et documentation — Evaluation du risque pour les processus et systèmes d'enregistrement,2014-03-03,1,['01.140.20'],ISO/TC 46/SC 11,9599,,[85321],"['en','fr']",37,"<p>ISO/TR 18128:2014 intends to assist organizations in assessing risks to records processes and systems so they can ensure records continue to meet identified business needs as long as required.</p><p>ISO/TR 18128:2014:</p><p>a) establishes a method of analysis for identifying risks related to records processes and systems,</p><p>b) provides a method of analysing the potential effects of adverse events on

61602,TR,,ISO/TR 18146:2015,Space systems — Space debris mitigation design and operation guidelines for spacecraft,Systèmes spatiaux — Conception de mitigation des débris spatiaux et lignes directrices de manoeuvre de la navette,2015-10-01,1,['49.140'],ISO/TC 20/SC 14,9599,,[77688],['en'],50,"<p>ISO/TR 18146:2015 contains non-normative information on spacecraft design and operational practices for mitigating space debris.</p><p>ISO/TR 18146:2015 is a supporting document to the family of international standards addressing space debris mitigation (see 2.2). The purpose of these standards is to minimize the creation of additional space debris by ensuring that spacecraft and launch vehicle orbit

38675,TR,,ISO/TR 18394:2006,Surface chemical analysis — Auger electron spectroscopy — Derivation of chemical information,Analyse chimique des surfaces — Spectroscopie des électrons Auger — Déduction de l'information chimique,2006-08-08,1,['71.040.40'],ISO/TC 201/SC 7,9599,,[64895],['en'],16,<p>ISO/TR 18394:2006 provides guidelines for identifying chemical effects in X-ray or electron-excited Auger-electron spectra and for using these effects in chemical characterization.</p>

62582,TR,,ISO/TR 18486:2016,Plastics — Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance,Plastiques — Paramètres de comparaison de la distribution spectrale d'une source de lumière de laboratoire pour les applications de vieillissement et d'une distribution spectrale solaire de référence,2016-02-02,1,['83.080.01'],ISO/TC 61/SC 6,9599,,[74667],['en'],7,<p>ISO/TR 18486:2016 specifies a calculation method which allows calculating a parameter which compares the spectral irradiance of a laboratory radiation source for weathering application to a reference solar spectral irradiance.</p>

62612,TR,,ISO/TR 18491:2015,Welding and allied processes — Guidelines for measurement of welding energies,Soudage et techniques connexes — Lignes directrices pour le mesurage des énergies de soudage,2015-05-06,1,['25.160.01'],ISO/TC 44/SC 10,9599,,[88807],"['en','fr']",7,"<p>The following documents, in whole or in part, are normatively referenced in ISO/TR 18491:2015 and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.</p><p>ISO 15607, Specification and qualification of welding procedures for metallic materials ? General rules</p><p>ISO 17662,

33499,TR,,ISO/TR 18529:2000,Ergonomics — Ergonomics of human-system interaction — Human-centred lifecycle process descriptions,Ergonomie — Ergonomie de l'interaction homme/système — Descriptions des processus cycle de vie centrées sur l'opérateur humain,2000-06-22,1,['13.180'],ISO/TC 159/SC 4,9599,,[63462],['en'],28,

33579,TR,,ISO/TR 18690:2006,"Guidance for the selection, use and maintenance of safety, protective and occupational footwear","Lignes directrices pour la sélection, l'utilisation et l'entretien des chaussures de protection d'usage professionnel",2006-03-08,1,['13.340.50'],ISO/TC 94/SC 3,9599,,[53477],"['en','fr','ru']",19,"<p>ISO/TR 18690:2006 provides guidance for selection, use and maintenance of safety, protective and occupational footwear for professional use. It is designed for footwear manufacturers, suppliers, employers and self employed people, safety engineers and users. ISO/TR 18690:2006 also provides guidance for preparing national guidance in this area.</p>"

63558,TR,,ISO/TR 18845:2017,Dentistry — Test methods for machining accuracy of computer-aided milling machines,Médecine bucco-dentaire — Méthodes d'essai pour l'exactitude d'usinage des fraiseuses à commande numérique,2017-06-20,1,['11.060.01'],ISO/TC 106/SC 9,9599,,[75167],"['en','fr']",28,"<p>ISO/TR 18845:2017 specifies the test methods to evaluate the machining accuracy of computer-aided milling machines as a part of dental CAD/CAM systems, which fabricate dental restorations, e.g. inlays, crowns and bridges.</p>"

31955,TR,,ISO/TR 18930:2001,Imaging materials — Protocols for outdoor weathering experiments,Matériaux pour l'image — Protocoles pour expériences de temps en extérieur,2001-05-31,1,['37.040.99'],ISO/TC 42,9599,,[54739],['en'],7,

38947,TR,,ISO/TR 19032:2006,Plastics — Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions,Plastiques — Utilisation d'éprouvettes de référence en polyéthylène pour l'évaluation des conditions de vieillissement climatique,2006-10-12,1,['83.080.01'],ISO/TC 61/SC 6,9599,,[77355],['en'],16,<p>ISO/TR 19032:2006 describes a method that demonstrates the use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor conditions in weathering tests used for plastics.</p>

77355,TR,,ISO/TR 19032:2019,Plastics — Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions,Plastiques — Utilisation d'éprouvettes de référence en polyéthylène pour l'évaluation des conditions de vieillissement climatique,2019-09-30,2,['83.080.01'],ISO/TC 61/SC 6,9599,[38947],[88061],['en'],16,<p>This document describes a method that demonstrates the use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor conditions in weathering tests used for plastics.</p>

64074,TR,,ISO/TR 19234:2016,Hydrometry — Low cost baffle solution to aid fish passage at triangular profile weirs that conform to ISO 4360,Hydrométrie — Projet de chicane à faible coût pour faciliter le passage des poissons au niveau des déversoirs à profil triangulaire conformes à l'ISO 4360,2016-12-12,1,['17.120.20'],ISO/TC 113/SC 2,9599,,[80462],['en'],13,<p>ISO/TR 19234:2016 specifies the requirements for the integration of baffles on the downstream face of triangular profile flow measurement structures to aid the passage of fish.</p>

33784,TR,,ISO/TR 19319:2003,"Surface chemical analysis — Auger electron spectroscopy and X-ray photoelectron spectroscopy — Determination of lateral resolution, analysis area, and sample area viewed by the analyser","Analyse chimique des surfaces — Spectroscopie des électrons Auger et spectroscopie de photoélectrons — Détermination de la résolution latérale, de l'aire de la surface d'analyse et de l'aire de la surface de l'échantillon contribuant au signal détecté",2003-11-28,1,['71.040.40'],ISO/TC 201/SC 2,9599,,[54115],['en'],17,"<p>ISO/TR 19319:2003 provides information for measuring (1) the lateral resolution, (2) the analysis area, and (3) the sample area viewed by the analyser in Auge

4052,TR,,ISO/TR 197-1:1976,Copper and copper alloys — Terms and definitions — Part 1: Materials,Cuivre et alliages de cuivre — Termes de référence et définitions — Partie 1: Matériaux,1976-09-01,1,"['77.120.30','01.040.77','77.150.30']",ISO/TC 26,9599,,[4053],['en'],4,

4054,TR,,ISO/TR 197-2:1976,Copper and copper alloys — Terms and definitions — Part 2: Refinery shapes,Cuivre et alliages de cuivre — Termes de référence et définitions — Partie 2: Formes brutes d'affinage,1976-09-01,1,"['01.040.77','77.150.30']",ISO/TC 26,9599,,[4055],['en'],2,

4056,TR,,ISO/TR 197-3:1976,Copper and copper alloys — Terms and definitions — Part 3: Wrought products,Cuivre et alliages de cuivre — Termes de référence et définitions — Partie 3: Produits corroyés,1976-09-01,1,"['01.040.77','77.150.30']",ISO/TC 26,9599,,[4057],['en'],3,

4058,TR,,ISO/TR 197-4:1976,Copper and copper alloys — Terms and definitions — Part 4: Castings,Cuivre et alliages de cuivre — Termes de référence et définitions — Partie 4: Produits moulés,1976-09-01,1,"['01.040.77','77.150.30']",ISO/TC 26,9599,,[4059],['en'],2,

39185,TR,,ISO/TR 19961:2005,Cranes — Safety code on mobile cranes,Appareils de levage à charge suspendue — Code de sécurité sur les grues mobiles,2005-09-21,1,['53.020.20'],ISO/TC 96/SC 6,9599,,[55963],['en'],10,"<p>ISO/TR 19961:2005 provides a guide to International Standards applicable to mobile cranes (crawler cranes, locomotive cranes, wheel-mounted cranes and any variations thereof that retain the same fundamental characteristics) and a summary of related provisions. Special adaptations of the general types of machine covered, where applicable, also fall within its scope. </p>"

76687,TR,,ISO/TR 20078-4:2019,Road vehicles — Extended vehicle (ExVe) web services — Part 4: Control,Véhicule routiers — Web services du véhicule étendu (ExVe) — Partie 4: Contrôle,2019-04-24,1,['43.040.15'],ISO/TC 22/SC 31,9599,,[80186],['en'],16,"<p>This document describes the processes of an Offering Party's implementation to provide (ISO 20078‑2) Access controlled (ISO 20078-3) Resources (ISO 20078‑1) to Accessing Parties. The processes are summarized as: Registration of different stakeholder as well as granting, denying and revoking of Access to Resources. Those processes are held as examples of combining ISO 20078‑1, ISO 20078‑2 and ISO 20078‑3 and can vary depending on the actual impl

39261,TR,,ISO/TR 20172:2006,Welding — Grouping systems for materials — European materials,Soudage — Systèmes de groupement des matériaux — Matériaux européens,2006-01-27,1,['25.160.20'],ISO/TC 44/SC 10,9599,,[50640],['en'],29,"<p>ISO/TR 20172:2006 provides a European grouping system for materials for welding purposes, classified in accordance with the grouping system of ISO/TR 15608.</p><p>It may also apply for other purposes as heat treatment, forming, non destructive testing. Types of steels in accordance with the grouping system of ISO/TR 15608:2005, Table 1.</p><p>This Technical Report covers grouping systems for the following standardized materials:</p><ul><li>steel;</li><li>aluminium a

50640,TR,,ISO/TR 20172:2009,Welding — Grouping systems for materials — European materials,Soudage — Systèmes de groupement des matériaux — Matériaux européens,2009-06-15,2,['25.160.20'],ISO/TC 44/SC 10,9599,[39261],[75557],"['en','fr']",33,"<p>ISO/TR 20172:2009 establishes a European grouping system for materials for welding purposes, classified in accordance with the grouping system of ISO/TR 15608. It is also applicable for other purposes such as heat treatment, forming and non-destructive testing.</p><p>ISO/TR 20172:2009 covers grouping systems for the following standardized materials:</p><p>– steel;</p><p>– aluminium and its alloys;</p><p>– copper and its alloys;</p><p>– cast irons.</p>"

39262,TR,,ISO/TR 20173:2005,Welding — Grouping systems for materials — American materials,Soudage — Systèmes de groupement des matériaux — Matériaux américains,2005-12-05,1,['25.160.20'],ISO/TC 44/SC 10,9599,,[51793],['en'],56,"<p>ISO/TR 20173:2005 provides an American grouping system for materials for welding purposes, classified in accordance with the grouping system of ISO/TR 15608:2000.</p>"

51793,TR,,ISO/TR 20173:2009,Welding — Grouping systems for materials — American materials,Soudage — Systèmes de groupement des matériaux — Matériaux américains,2009-09-29,2,['25.160.20'],ISO/TC 44/SC 10,9599,[39262],[69020],"['en','fr']",58,"<p>ISO/TR 20173:2009 provides an American grouping system for materials for welding purposes, classified in accordance with the grouping system of ISO/TR 15608:2005.</p><p>It may also apply for other purposes, such as heat treatment, forming, and non-destructive testing. Types of steels are listed in accordance with the grouping system of ISO/TR 15608:2005, Table 1.</p><p>ISO/TR 20173:2009 covers grouping systems for the following standardized materials:

39263,TR,,ISO/TR 20174:2005,Welding — Grouping systems for materials — Japanese materials,Soudage — Systèmes de groupement des matériaux — Matériaux japonais,2005-12-07,1,['25.160.20'],ISO/TC 44/SC 10,9599,,[78846],['en'],25,"<p>ISO 20174:2005 provides a Japanese grouping system for materials for welding purposes, classified in accordance with the grouping system of ISO/TR:15608:2000.</p>"

39423,TR,,ISO/TR 20432:2007,Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement,Lignes directrices pour la détermination de la résistance à long terme des géosynthétiques pour le renforcement du sol,2007-11-21,1,['59.080.70'],ISO/TC 221,9599,,[78712],['en'],31,"<p>ISO/TR 20432:2007 provides guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement.</p><p>ISO/TR 20432:2007 describes a method of deriving reduction factors for geosynthetic soil reinforcement materials to account for creep and creep rupture, installation damage and weathering, and chemical and biological degradation. It is intended to provide

52742,TR,Cor,ISO/TR 20432:2007/Cor 1:2008,Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement — Technical Corrigendum 1,Lignes directrices pour la détermination de la résistance à long terme des géosynthétiques pour le renforcement du sol — Rectificatif technique 1,2008-10-23,1,['59.080.70'],ISO/TC 221,9599,,[78712],['en'],2,

34183,TR,,ISO/TR 20461:2000,Determination of uncertainty for volume measurements made using the gravimetric method,Détermination de l'incertitude de mesure pour les mesurages volumétriques effectués au moyen de la méthode gravimétrique,2000-11-02,1,['17.060'],ISO/TC 48,9599,,[68803],['en'],10,"<p>This Technical Report gives the detailed evaluation of uncertainty for volume measurements according to the</p><p><i>Guide to the Expression of Uncertainty in Measurement </i>(GUM) [1]. It uses the gravimetric method specified in</p><p>ISO 8655-6 [2] as the reference method for calibrating piston-operated volumetric apparatus. It has been arranged</p><p>in paragraphs to facilitate direct access to d

52847,TR,Cor,ISO/TR 20461:2000/Cor 1:2008,Determination of uncertainty for volume measurements made using the gravimetric method — Technical Corrigendum 1,Détermination de l'incertitude de mesure pour les mesurages volumétriques effectués au moyen de la méthode gravimétrique — Rectificatif technique 1,2008-12-03,1,['17.060'],ISO/TC 48,9599,,[68803],['en'],2,

39560,TR,,ISO/TR 20572:2007,Footwear — Performance requirements for components for footwear — Accessories,Chaussures — Exigences de performance pour les composants des chaussures — Accessoires,2007-02-02,1,['61.060'],ISO/TC 216,9599,,[76408],['en'],3,"<p>ISO/TR 20572:2007 establishes the performance requirements for accessories (laces and eyelets, metal components and touch and close fasteners) for footwear (not for finished footwear), irrespective of the material, in order to assess the suitability for the end use. It also establishes the test methods to be used to evaluate the compliance with the requirements.</p><p>This Technical Report applies to accessories (laces and eyelets, metal com

68467,TR,,ISO/TR 20590:2017,Space systems - Debris mitigation design and operation manual for launch vehicle orbital stages,Systèmes spatiaux - Conception pour l'attenuation des débris et manuel d'utilisation à étages orbitaux pour les véhicules de lancement,2017-02-06,1,['49.140'],ISO/TC 20/SC 14,9599,,[81216],['en'],33,"<p>ISO/TR 20590:2017 contains non-normative information on the design and operational practices for launch vehicle orbital stages for mitigating space debris.</p><p>ISO/TR 20590:2017 can be used to guide engineers in the application of the family of space debris mitigation standards (see 4.2) to reduce the growth of space debris by ensuring that launch vehicle orbital stage

43963,TR,,ISO/TR 20879:2007,Footwear — Performance requirements for components for footwear — Uppers,Chaussures — Exigences de performance pour les composants des chaussures — Tiges,2007-02-02,1,['61.060'],ISO/TC 216,9599,,[76409],['en'],19,"<p>ISO/TR 20879:2007 establishes the performance requirements for uppers component for footwear (not for the finished footwear), irrespective of the material, in order to assess the suitability for the end use. It also establishes the test methods to be used to evaluate the compliance with the requirements.</p><p>This Technical Report applies to uppers for various kinds of footwear.</p><p>ISO/TR 20879:2007 is intended to be used as a reference between th

43964,TR,,ISO/TR 20880:2007,Footwear — Performance requirements for components for footwear — Outsoles,Chaussures — Exigences de performance pour les composants des chaussures — Semelles d'usure,2007-02-02,1,['61.060'],ISO/TC 216,9599,,[76410],['en'],15,"<p>ISO/TR 20880:2007 establishes the performance requirements for outsoles components for footwear (not for the finished footwear), irrespective of the material, in order to assess the suitability for the end use. It also establishes the test methods to be used to evaluate the compliance with the requirements.</p><p>This Technical Report applies to outsoles for various kinds of footwear.</p><p>ISO/TR 20880:2007 is intended to be used as a re

43965,TR,,ISO/TR 20881:2007,Footwear — Performance requirements for components for footwear — Insoles,Chaussures — Exigences de performance pour les composants des chaussures — Premières de montage,2007-02-02,1,['61.060'],ISO/TC 216,9599,,[76411],['en'],11,"<p>ISO/TR 20881:2007 establishes the performance requirements for insoles components for footwear (not for the finished footwear), irrespective of the material, in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods to be used to evaluate the compliance with the requirements.</p><p>This Technical Report applies to insoles for various kinds of footwear.</p><p>ISO/TR 20881:2007 is

43966,TR,,ISO/TR 20882:2007,Footwear — Performance requirements for components for footwear — Lining and insocks,Chaussures — Exigences de performance pour les composants des chaussures — Doublures et premières de propreté,2007-02-02,1,['61.060'],ISO/TC 216,9599,,[76412],['en'],20,"<p>ISO/TR 20882:2007 establishes the performance requirements for lining and insock components for footwear (not for finished footwear), irrespective of the material, in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods to be used to evaluate the compliance with the requirements.</p><p>This Technical Report applies to lining and insocks for various kin

43967,TR,,ISO/TR 20883:2007,Footwear — Performance requirements for components for footwear — Shanks,Chaussures — Exigences de performance pour les composants des chaussures — Cambrions,2007-02-02,1,['61.060'],ISO/TC 216,9599,,[76413],['en'],2,"<p>ISO/TR 20883:2007 establishes the performance requirements for shanks components for footwear (not for finished footwear), irrespective of the material, in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods to be used to evaluate the compliance with the requirements.</p><p>This Technical Report applies to shanks for various kinds of footwear.</p><p>ISO/TR 20883:2007 is intended to be use

34359,TR,,ISO/TR 20983:2003,Information and documentation — Performance indicators for electronic library services,Information et documentation — Indicateurs de performance pour les services électroniques des bibliothèques,2003-10-28,1,['01.140.20'],ISO/TC 46/SC 8,9599,,[37853],"['en','fr']",32,"<p>ISO/TR 20983:2003 is applicable to all types of libraries in all countries. Limitations on the applicability of individual performance indicators are listed in the scope clause of the description of each indicator.</p><p>Indicators may be used for comparison over time for the services provided by the same library. Comparisons between libraries and services should only be made with caution, taking

4079,TR,,ISO/TR 210:1999,"Essential oils — General rules for packaging, conditioning and storage","Huiles essentielles — Règles générales d'emballage, de conditionnement et de stockage",1999-03-11,1,['71.100.60'],ISO/TC 54,9599,[4078],[65538],"['en','fr']",9,

35645,TR,,ISO/TR 21089:2004,Health informatics — Trusted end-to-end information flows,Informatique de santé — Flux d'informations 'trusted end-to-end',2004-06-15,1,['35.240.80'],ISO/TC 215,9599,,[66936],['en'],47,"<p>ISO/TR 21089:2004 offers a guide to trusted end-to-end information flow for health(care) records and to the key trace points and audit events in the electronic entity/act record lifecycle (from point of record origination to each ultimate point of record access/use). It also offers recommendations regarding the trace/audit detail relevant to each.</p><p>It offers recommendations of best practice for healthcare providers, health record stewards, software developers and vendors, e

4081,TR,,ISO/TR 211:1999,Essential oils — General rules for labelling and marking of containers,Huiles essentielles — Règles générales d'étiquetage et de marquage des récipients,1999-03-11,1,['71.100.60'],ISO/TC 54,9599,[4080],[65539],"['en','fr']",3,

54859,TR,,ISO/TR 21102:2013,Adventure tourism — Leaders — Personnel competence,Tourisme d'aventure — Leaders — Compétence du personnel,2013-08-21,1,"['03.200.10','03.080.30']",ISO/TC 228,9599,,[76475],['en'],8,<p>ISO/TR 21102:2013 indicates what the market normally considers as desirable competencies and the related expected results of competencies for adventure tourism activity leaders common to any adventure tourism activity.</p><p>ISO/TR 21102:2013 does not apply to adventure tourism activity leaders involved in underwater activities for which there are other specific International Standards.</p>

70230,TR,,ISO/TR 21245-1:2016,Railway applications — Rail project planning process — Part 1: Stakeholders and their needs/interests,Applications ferroviaires - Processus de planification de projets ferroviaires — Partie 1: Partie prenantes et leurs besoins/intérêts,2016-11-14,1,['45.020'],ISO/TC 269,9599,,[74012],['en'],18,"<p>ISO/TR 21245-1:2016 aims to identify typical stakeholders of rail projects and their generic needs/interests and does not interfere with existing national and local laws, legal requirements and regulations. It covers only the planning stage of rail projects and does not cover the execution stage. Any type of rail project is included (building a new line, retrofitting o

70251,TR,,ISO/TR 21245-2:2016,Railway applications — Rail project planning process — Part 2: Conditions,Applications ferroviaires - Processus de planification de projets ferroviaires — Partie 2: Conditions,2016-10-31,1,['45.020'],ISO/TC 269,9599,,[74012],['en'],5,"<p>ISO/TR 21245-2:2016 aims to identify basic conditions of rail projects, which are essential input for the design of rail systems. This document does not interfere with existing national and local laws, legal requirements and regulations. It considers only the 'planning stage' of rail projects and does not deal with the 'execution stage'. Any type of rail projects is intended to be dealt with, such as building a new line, retrofi

6927,TR,,ISO/TR 2136:1977,Wrought aluminium and aluminium alloys — Rolled products — Mechanical properties,Aluminium et alliages d'aluminium de corroyage — Produits laminés — Propriétés mécaniques,1977-01-01,1,['77.150.10'],ISO/TC 79/SC 6,9599,,[12677],['en'],9,

61519,TR,,ISO/TR 21506:2018,"Project, programme and portfolio management — Vocabulary","Gestion de projet, programme et portefeuille — Vocabulaire",2018-12-03,1,"['03.100.40','01.040.03']",ISO/TC 258,9599,,[87900],['en'],9,"<p>This document defines terms used in the field of project, programme and portfolio management. It can be used by any type of organization, including public or private, and any size or sector, as well as any type of project, programme or portfolio in terms of complexity, size or duration.</p>"

71475,TR,,ISO/TR 21718:2017,Intelligent transport systems — Spatio-temporal data dictionary for cooperative ITS and automated driving systems,Systèmes de transport intelligents — Dictionnaire de données spatio-temporelles pour les systèmes de conduite automatisée et les STI coopératifs,2017-11-15,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[75072],['en'],191,<p>ISO/TR 21718:2017 describes a spatio-temporal data dictionary for cooperative ITS and automated driving systems.</p><p>This data dictionary includes static data and dynamic data.</p>

40398,TR,,ISO/TR 21730:2005,Health informatics — Use of mobile wireless communication and computing technology in healthcare facilities — Recommendations for the management of unintentional electromagnetic interference with medical devices,Informatique de santé — Utilisation de communications mobiles sans fil et des technologies informatisées dans les structures de soins — Recommandations pour la gestion des interférences électromagnétiques non intentionnelles avec les dispositifs médicaux,2005-01-12,1,['35.240.80'],ISO/TC 215,9599,,[44865],['en'],21,"<p>ISO 21730:2005 provides guidance for the deployment, use and management of mobile wireless communication and computing equipment in the hea

40444,TR,,ISO/TR 21808:2009,"Guidance on the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters","Guidage sur la sélection, l'utilisation, le soin et l'entretien des équipements de protection individuelle (PPE) conçus pour pourvoir à la protection des pompiers",2009-10-16,1,['13.340.10'],ISO/TC 94/SC 14,9599,,[73744],['en'],15,"<p>ISO/TR 21808:2009 sets out guidance for the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters while carrying out their duties.</p><p>The PPE covered in ISO/TR 21808:2009 is intended for firefighting personnel exposed to

73744,TR,,ISO/TR 21808:2021,"Guidance on the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters","Lignes directices sur la sélection, l'utilisation, le soin et l'entretien des équipements de protection individuelle (PPE) conçus pour pourvoir à la protection des pompiers",2021-02-10,2,['13.340.10'],ISO/TC 94/SC 14,9599,[40444],[85651],['en'],80,"<p>This document sets out guidance for the selection, use, care and maintenance of PPE designed to provide protection for firefighters while carrying out their duties.</p><p>The PPE covered in this document is intended for firefighting personnel exposed to risks associated with b

73927,TR,,ISO/TR 21959-1:2018,Road vehicles — Human performance and state in the context of automated driving — Part 1: Common underlying concepts,Titre manque — Partie 1: Titre manque,2018-11-29,1,['43.020'],ISO/TC 22/SC 39,9599,,[78088],['en'],24,"<p>This document introduces basic common underlying concepts related to driver performance and state in the context of automated driving. The concepts in this document are applicable to all levels of automated driving functions that require a human/driver to be engaged or fallback-ready (SAE Level 1, 2 and 3). It can also be used with levels that enable a driver to resume manual control of the vehicle (a compatible feature for SAE Levels 1 to 5).

63159,TR,,ISO/TR 22100-1:2015,Safety of machinery — Relationship with ISO 12100 — Part 1: How ISO 12100 relates to type-B and type-C standards,Sécurité des machines — Relation avec l'ISO 12100 — Partie 1: Relation entre l'ISO 12100 et les normes de type B et type C,2015-05-21,1,['13.110'],ISO/TC 199,9599,,[80420],['en'],16,"<p>ISO/TR 22100-1:2015 provides assistance to the designer/manufacturer of machinery and related components as to how the system of existing type-A, type-B and type-C machinery safety standards should be applied in order to design a machine to achieve a level of tolerable risk by adequate risk reduction.</p><p>It explains the general principles of ISO 12100 and how this t

72645,TR,,ISO/TR 22131:2018,Railway applications — Railway braking — Country specific applications for ISO 20138-1,Applications ferroviaires — Freinage ferroviaire — Applications nationales spécifiques de l'ISO 20138-1,2018-10-19,1,['45.020'],ISO/TC 269/SC 2,9599,,[84708],"['en','fr']",25,<p>This document provides additional information to assist the understanding and the use of ISO 20138-1. The calculations in this document follow the same principles but they are slightly different.</p><p>This document contains country specific calculation approaches currently in use and represents the state of knowledge including for calculating:</p><p>— stopping and slowing distances;</p><p>—

54094,TR,,ISO/TR 22201-3:2013,"Lifts (elevators), escalators and moving walks — Programmable electronic systems in safety related applications — Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE","Ascenseurs, escaliers mécaniques et trottoirs roulants — Conception et mise au point des systèmes électroniques programmables dans les applications liées à la sécurité — Partie 3: Lignes directrices pour le cycle de vie des systèmes électroniques programmables liés à PESSRAL et PESSRAE",2013-03-20,1,['91.140.90'],ISO/TC 178,9599,,[66849],['en'],9,<p>ISO/TR 22201-3:2013 provides additional information and process for the development of the instruction ma

40783,TR,,ISO/TR 22221:2006,Health informatics - Good principles and practices for a clinical data warehouse,Informatique de santé — Principes et indications d'exploitation d'un entrepôt de données cliniques,2006-10-25,1,['35.240.80'],ISO/TC 215,9599,,[82180],['en'],42,"<p>The focus of ISO/TR 22221:2006 is clinical databases or other computational services, hereafter referred to as a clinical data warehouse (CDW), which maintain or access clinical data for secondary use purposes. The goal is to define principles and practices in the creation, use, maintenance and protection of a CDW, including meeting ethical and data protection requirements and recommendations for policies for information g

56897,TR,,ISO/TR 22312:2011,Societal security — Technological capabilities,Sécurité sociétale — Capacités technologiques,2011-07-01,1,['03.100.01'],ISO/TC 292,9599,,[50049],"['en','ru']",13,"<p>The purpose of ISO/TR 22312:2011 is to document the knowledge accumulated in the six month study period conducted by ISO/TC 223/Ad hoc group 1 (AHG1), in which AHG1 examined the different existing available technologies which would be relevant to standardize within the field of societal security.</p>"

40933,TR,,ISO/TR 22411:2008,Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities,Données d'ergonomie et lignes directrices pour l'application du Guide ISO/CEI 71 aux produits et services afin de répondre aux besoins des personnes âgées et de celles ayant des incapacités,2008-08-27,1,"['01.120','11.180.01']",ISO/TC 159,9599,,[78847],['en'],160,"<p>ISO/TR 22411:2008 presents ergonomics data and guidelines for applying ISO/IEC Guide 71 in addressing the needs of older persons and persons with disabilities in standards development. It provides ergonomics data and knowledge about human a

46532,TR,,ISO/TR 22514-4:2007,Statistical methods in process management — Capability and performance — Part 4: Process capability estimates and performance measures,Méthodes statistiques dans la gestion de processus — Aptitude et performance — Partie 4: Estimations de l'aptitude de processus et mesures de performance,2007-11-21,1,['03.120.30'],ISO/TC 69/SC 4,9599,,[65289],['en'],48,<p>ISO/TR 22514-4:2007 describes process capability and performance measures that are commonly used.</p>

43968,TR,,ISO/TR 22648:2007,Footwear — Performance requirements for components for footwear — Stiffeners and toepuffs,Chaussures — Exigences de performance pour les composants des chaussures — Contreforts et renforts,2007-02-02,1,['61.060'],ISO/TC 216,9599,,[76414],['en'],2,"<p>ISO/TR 22648:2007 establishes the performance requirements for stiffener and toepuff components for footwear (not for finished footwear), irrespective of the material, in order to assess the suitability for the end use and/or fitness for purpose. It also establishes the test methods to be used to evaluate the compliance with the requirements.</p><p>This Technical Report applies to stiffeners and toepuffs for various k

35134,TR,,ISO/TR 22824:2003,Welding consumables — Predicted and measured FN in specifications — A position statement of the experts of IIW Commission IX,Produits consommables de soudage — Valeurs prévues et valeurs mesurées de l'Indice de Ferrite (FN) dans les spécifications — Position des experts de la Commission IX de l'IIW,2003-12-03,1,['25.160.10'],IIW,9599,,[83725],"['en','fr']",5,"<p>ISO/TR 22824:2003 provides guidance, based on the experience of experts, for setting appropriate requirements, in specifications and other standards and contract documents, on ferrite content of nominally austenitic or duplex ferritic-austenitic stainless steel weld metals.</p>"

56733,TR,,ISO/TR 22899-2:2013,Determination of the resistance to jet fires of passive fire protection — Part 2: Guidance on classification and implementation methods,Détermination de la résistance aux feux propulsés de protection passive contre l'incendie — Partie 2: Directives relatives à la classification et aux méthodes de mise en oeuvre,2013-06-03,1,['13.220.50'],ISO/TC 92/SC 2,9599,,[76683],['en'],17,<p>The test specified in ISO 22899-1 is designed to give an indication of how passive fire protection materials will perform in a jet fire. </p><p>ISO/TR 22899-2:2013 provides: background information on the applicability and validation of the jet fire test; further details on testing pipe p

36564,TR,,ISO/TR 22957:2009,"Document management — Analysis, selection and implementation of electronic document management systems (EDMS)","Gestion de documents — Analyse, choix et mise en oeuvre de systèmes de gestion de documents électroniques (EDMS)",2009-12-03,1,['37.080'],ISO/TC 171/SC 2,9599,,[71605],['en'],41,"<p>ISO/TR 22957:2009 presents a recommended set of procedures and activities that are advisable when performing analysis, selection and implementation of project phases associated with electronic document management systems technologies. ISO/TR 22957:2009 provides user-level information outlining specific recommended activities to be completed throughout the various project pha

39558,TR,,ISO/TR 22979:2006,Ophthalmic implants — Intraocular lenses — Guidance on assessment of the need for clinical investigation of intraocular lens design modifications,Implants ophtalmiques — Lentilles intraoculaires — Directives relatives à l'évaluation de la nécessité d'investigation clinique pour les modifications de conception des lentilles intraoculaires,2006-02-14,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[61830],"['en','fr']",19,"<p>ISO/TR 22979:2006 provides guidance on the application of Parts 3, 7 and 9 of the ISO 11979 series of International Standards for intraocular lenses (IOLs). It addresses factors to be considered in a risk analysis of the significance of modifications to

46441,TR,,ISO/TR 230-8:2009,Test code for machine tools — Part 8: Determination of vibration levels,Code d'essai des machines-outils — Partie 8: Détermination des niveaux de vibration,2009-01-07,1,['25.080.01'],ISO/TC 39/SC 2,9599,,[55987],"['en','fr']",93,"<p>ISO/TR 230-8:2009 is concerned with the different types of vibration that can occur between the tool holding part and the work-piece holding part of a machine tool. (For simplicity, these will generally be referred to as “tool” and “work-piece”, respectively.) These are vibrations that can adversely influence the production of both an acceptable surface finish and an accurate work-piece.</p><p>ISO/TR 230-8:2009 is not aimed primarily a

74571,TR,,ISO/TR 23107:2019,Criteria for assessment of new extinguishants for inclusion in the ISO 14520 series,Critères pour l'évaluation de nouveaux agents extincteurs destinés à être inclus dans la série ISO 14520,2019-04-17,1,['13.220.10'],ISO/TC 21/SC 8,9599,,[79442],['en'],3,<p>This document addresses the subject of criteria for assessment of new extinguishants for inclusion in the ISO 14520 series.</p>

79442,TR,,ISO/TR 23107:2021,Criteria for assessment of new extinguishants for inclusion in the ISO 14520 series,Critères pour l'évaluation de nouveaux agents extincteurs destinés à être inclus dans la série ISO 14520,2021-07-08,2,['13.220.10'],ISO/TC 21/SC 8,9599,[74571],[79444],['en'],4,<p>This document suggests specific types of information that can be useful for assessing safe and effective gaseous extinguishing media for inclusion in the ISO 14520 series.</p>

7163,TR,,ISO/TR 2329:1977,Withdrawal of ISO/TR 2329-1977,Annulation de l'ISO/TR 2329-1977,1977-02-01,1,['13.160'],ISO/TC 110,9599,,[7164],['en'],3,

41519,TR,,ISO/TR 23462:2007,Space systems — Guidelines to define the management framework for a space project,Systèmes spatiaux — Lignes directrices pour définir le cadre de management pour un projet spatial,2007-06-25,1,['49.140'],ISO/TC 20/SC 14,9599,,[61848],['en'],10,"<p>ISO/TR 23462:2007 provides a framework within which an organization can establish the basis for the development of programme/project management specifications and plans when undertaking the execution of a specific programme/project. It enables the programme/project manager to establish the criteria for programme/project success and to secure the organization's commitment to the programme/project manager's management appr

41705,TR,,ISO/TR 23605:2009,Technical product specification (TPS) — Application guidance — International model for national implementation,Spécification technique de produits (TPS) — Lignes directrices d'application — Modèle international pour mises en oeuvre nationales,2009-12-11,1,['01.100.01'],ISO/TC 213,9599,,[70142],['en'],20,"<p>ISO/TR 23605:2010 provides guidance for the preparation of all technical product specifications in the mechanical engineering field. The document operates as an index to the many ISO standards applicable to a TPS by means of cross-reference, and, where appropriate, the subject references are supplemented by commentary and recommendations considered to be of sig