Withdrawn and superseded ISO standards — page 226 of 246

34638,TR,,ISO/TR 11610:2004,Protective clothing — Vocabulary,Vêtements de protection — Vocabulaire,2004-04-26,1,"['13.340.10','01.040.13']",ISO/TC 94/SC 13,9599,,"[76610,69021]","['de','en','fr']",93,"<p>ISO/TR 11610:2004 contains a list of terms which are frequently used in the standardization of protective clothing and protective equipment worn on the body, including hand and arm protection and lifejackets, and definitions of these terms. </p><p>The definitions are intended to support an unambiguous use of the terms listed.</p>"

53336,TR,,ISO/TR 11633-1:2009,Health informatics — Information security management for remote maintenance of medical devices and medical information systems — Part 1: Requirements and risk analysis,Informatique de santé — Management de la sécurité de l'information pour la maintenance à distance des dispositifs médicaux et des systèmes d'information médicale — Partie 1: Exigences et analyse du risque,2009-11-06,1,['35.240.80'],ISO/TC 215,9599,,[69336],['en'],17,<p>ISO/TR 11633-1:2009 focuses on remote maintenance services (RMS) for information systems in health care facilities as provided by vendors of medical devices or health information systems (RMS providers) and shows an example of carry

53337,TR,,ISO/TR 11633-2:2009,Health informatics — Information security management for remote maintenance of medical devices and medical information systems — Part 2: Implementation of an information security management system (ISMS),Informatique de santé — Management de la sécurité de l'information pour la maintenance à distance des dispositifs médicaux et des systèmes d'information médicale — Partie 2: Mise en oeuvre d'un système de management de la sécurité de l'information (ISMS),2009-11-06,1,['35.240.80'],ISO/TC 215,9599,,"[70567,78861]",['en'],66,"<p>ISO/TR 11633‑2:2009 provides an example of selected and applied 'controls' for RMS security based on the definition in the ISMS, on the b

19568,TR,,ISO/TR 11637:1997,Boron treated engineering steels for quenching and tempering,Aciers de construction mécanique traités au bore pour trempe et revenu,1997-12-25,1,['77.140.10'],ISO/TC 17/SC 4,9599,,[54174],"['en','fr']",18,

19598,TR,,ISO/TR 11674:1996,Ships and marine technology — Automatic pilots,Navires et technologie maritime — Pilotes automatiques,1996-02-01,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[26148],"['en','fr']",10,

23630,TR,,ISO/TR 11905-2:1997,"Water quality — Determination of nitrogen — Part 2: Determination of bound nitrogen, after combustion and oxidation to nitrogen dioxide, chemiluminescence detection","Qualité de l'eau — Dosage de l'azote — Partie 2: Dosage de l'azote lié, après combustion et oxidation au dioxyde d'azote, par détection chimiluminescente",1997-03-20,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[58012],"['en','fr']",9,

3200,TR,,ISO/TR 11945:1998,Iron ores — Currently traded international ores,Minerais de fer — Minerais internationaux commercialisés,1998-02-19,1,['73.060.10'],ISO/TC 102/SC 2,9599,,[39115],"['en','fr']",49,

51064,TR,,ISO/TR 11954:2008,Fuel cell road vehicles — Maximum speed measurement,Véhicules routiers à pile à combustible — Mesure de la vitesse maximale,2008-10-09,1,['43.120'],ISO/TC 22/SC 37,9599,,[84730],['en'],7,"<p>ISO/TR 11954:2008 describes test procedures for measuring the maximum road speed of fuel cell passenger cars and light duty trucks which use compressed hydrogen and which are not externally chargeable, in accordance with national or regional standards or legal requirements.</p>"

20935,TR,,ISO/TR 12100-1:1992,"Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology","Sécurité des machines — Notions fondamentales, principes généraux de conception — Partie 1: Terminologie de base, méthodologie",1992-12-30,1,"['13.110','01.040.13']",ISO/TC 199,9599,,[27239],"['en','fr']",37,"<p>The document defines basic terminology and specifies general design methods, to help designers and manufacturers in achieving safety in the design of machinery for professional and non-professional purposes.</p>"

20936,TR,,ISO/TR 12100-2:1992,"Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles and specifications","Sécurité des machines — Notions fondamentales, principes généraux de conception — Partie 2: Principes et spécifications techniques",1992-12-30,1,['13.110'],ISO/TC 199,9599,,[27240],"['en','fr']",59,<p>The document defines technical principles and specifications to help designers and manufacturers in achieving safety in the design of machinery for professional and non-professional purposes. It may also be used for other technical products having similar hazards.</p>

21105,TR,,ISO/TR 12178:1994,Industrial automation — Time-critical communications architectures — User requirements,Automatisation industrielle — Architectures des communications en temps réel — Prescriptions des utilisateurs,1994-03-24,1,['25.040.40'],ISO/TC 184/SC 5,9599,,[30882],['en'],36,

30148,TR,,ISO/TR 12349-1:1999,Road vehicles — Dummies for restraint system testing — Part 1: Adult dummies,Véhicules routiers — Mannequins pour essais de systèmes de retenue — Partie 1: Mannequins adultes,1999-12-16,1,['43.180'],ISO/TC 22/SC 36,9599,,[65082],"['en','fr']",3,

30149,TR,,ISO/TR 12349-2:1999,Road vehicles — Dummies for restraint system testing — Part 2: Child dummies,Véhicules routiers — Mannequins pour essais de systèmes de retenue — Partie 2: Mannequins enfants,1999-12-16,1,['43.180'],ISO/TC 22/SC 36,9599,,[65083],"['en','fr']",3,

37835,TR,,ISO/TR 12350:2004,Road vehicles - Injury risk curves for evaluation of occupant protection in side impact,Véhicules routiers - Courbes de risques de blessures pour l'évaluation de la protection des occupants en choc latéral,2004-03-10,1,['43.020'],ISO/TC 22,9599,,[55888],['en'],24,"<p>ISO/TR 12350:2004 provides injury risk curves for the evaluation of occupant protection in side impacts on road vehicles. The measurements concerned are performed on two lateral impact dummies, EuroSID 1 and BioSID, which present acceptable levels of biofidelity response in accordance with ISO/TR 9790 and are used in tests carried out according to ISO 10997.</p>"

63851,TR,,ISO/TR 12417-2:2017,Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products — Part 2: Local regulatory information,Implants cardiovasculaires et circuits extra-corporels — Produits de combinaison médicament-dispositif vasculaire — Partie 2: Directives règlementaires locales,2017-11-21,1,['11.040.40'],ISO/TC 150/SC 2,9599,,[80895],['en'],29,"<p>ISO/TR 12417-2:2017 provides region-specific information for</p><p>- local submissions and approvals for vascular device-drug combination products (VDDCPs) in countries and regions around the world;</p><p>- changes related to the drug containing part and how they are evaluated by the different

1479,TR,,ISO/TR 12603:1996,Building construction machinery and equipment — Classification,Machines et matériels pour la construction des bâtiments — Classification,1996-03-21,1,['91.220'],ISO/TC 195,9599,,[50886],['en'],8,<p>Contains a classification of machines and equipment used in the building field. This field is divided into seven classes of traditional and specified use and the different machines are classified accordingly.</p>

2513,TR,,ISO/TR 12618:1994,Computational aids in terminology — Creation and use of terminological databases and text corpora,Aides informatiques en terminologie — Création et utilisation de bases de données terminologiques et de corpus de textes,1994-11-17,1,"['35.240.30','01.020']",ISO/TC 37/SC 3,9599,,[33431],"['en','fr']",16,<p>Provides guidance on the basic principles and methods for the application of data processing support in the preparation and use of terminological data collections. Especially applicable to the creation and use of terminological databases and text corpora.</p>

2460,TR,,ISO/TR 12735-1:1996,Mechanical testing of metals — Symbols used with their definitions — Part 1: Symbols and definitions in published standards,Essais mécaniques des métaux — Symboles utilisés et leurs définitions — Partie 1: Symboles et définitions figurant dans les normes publiées,1996-12-12,1,"['01.040.77','77.040.10']",ISO/TC 164,9599,,"[43056,36948]",['en'],35,<p>Enumerates the symbols and definitions used in published International Standards for specific methods of mechanical testing of metallic materials which are the responsibility of ISO TC 164.</p>

2686,TR,,ISO/TR 12764:1997,Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full,Mesure de débits des fluides dans les conduites fermées — Mesure de débit par débitmètres à effet vortex insérés dans les conduites de section circulaire remplies au droit,1997-11-27,1,['17.120.10'],ISO/TC 30/SC 5,9599,,[64603],['en'],18,

2713,TR,,ISO/TR 12767:1998,Measurement of fluid flow by means of pressure-differential devices — Guidelines to the effect of departure from the specifications and operating conditions given in ISO 5167-1,Mesurage du débit des fluides au moyen d'appareils déprimogènes — Lignes directrices relatives aux effets de divergence par rapport aux spécifications et conditions de fonctionnement données dans l'ISO 5167-1,1998-07-16,1,['17.120.10'],ISO/TC 30/SC 2,9599,,[40030],['en'],31,

40030,TR,,ISO/TR 12767:2007,Measurement of fluid flow by means of pressure differential devices — Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167,Mesurage du débit des fluides au moyen d'appareils déprimogènes — Lignes directrices relatives aux effets des écarts par rapport aux spécifications et aux conditions d’utilisation données dans l’ISO 5167,2007-08-28,2,['17.120.10'],ISO/TC 30/SC 2,9599,[2713],[85584],"['en','fr']",35,"<p>ISO/TR 12767 provides guidance on estimating the flowrate when using pressure differential devices constructed or operated outside the scope of ISO 5167.</p><p>Additional tolerances or corrections cannot necess

1834,TR,,ISO/TR 12776:1995,Pallets — Slip sheets,Palettes — Feuilles intercalaires (dites 'slip sheets'),1995-10-05,1,['55.180.20'],ISO/TC 51,9599,,[45542],"['en','fr']",25,"<p>Defines terms to slip sheets used as bases for the assembly, handling, storing and transporting of products and goods as unit loads. Gives details of typical materials and designs. Specifies requirements to dimensions and performance.</p>"

43028,TR,,ISO/TR 1281-1:2008,Rolling bearings — Explanatory notes on ISO 281 — Part 1: Basic dynamic load rating and basic rating life,Roulements — Notes explicatives sur l'ISO 281 — Partie 1: Charges dynamiques de base et durée nominale de base,2008-11-24,1,['21.100.20'],ISO/TC 4/SC 8,9599,[16009],[73879],"['en','fr']",40,<p>ISO/TR 1281-1:2008 gives supplementary background information regarding the derivation of mathematical expressions and factors given in ISO 281:2007.</p>

55069,TR,Cor,ISO/TR 1281-1:2008/Cor 1:2009,Rolling bearings — Explanatory notes on ISO 281 — Part 1: Basic dynamic load rating and basic rating life — Technical Corrigendum 1,Roulements — Notes explicatives sur l'ISO 281 — Partie 1: Charges dynamiques de base et durée nominale de base — Rectificatif technique 1,2009-09-25,1,['21.100.20'],ISO/TC 4/SC 8,9599,,[73879],"['en','fr']",1,

52093,TR,,ISO/TR 12885:2008,Nanotechnologies — Health and safety practices in occupational settings relevant to nanotechnologies,Nanotechnologies — Pratiques de sécurité dans les arrangements professionnels relatifs aux nanotechnologies,2008-09-30,1,"['13.100','07.120']",ISO/TC 229,9599,,[67446],"['en','fr']",79,"<p>ISO/TR 12885:2008 describes health and safety practices in occupational settings relevant to nanotechnologies.</p><p>ISO/TR 12885:2008 focuses on the occupational manufacture and use of engineered nanomaterials. It does not address health and safety issues or practices associated with nanomaterials generated by natural processes, hot processes and other standard operations which

1431,TR,,ISO/TR 12960:1998,Geotextiles and geotextile-related products — Screening test method for determining the resistance to liquids,Géotextiles et produits apparentés — Méthode d'essai pour la détermination de la résistance aux liquides,1998-11-05,1,['59.080.70'],ISO/TC 221,9599,,"[36711,68729,71924]",['en'],6,

70372,TR,,ISO/TR 13086-4:2019,Gas cylinders — Guidance for design of composite cylinders — Part 4: Cyclic fatigue of fibres and liners,Bouteilles à gaz — Recommandations pour la conception des bouteilles en matière composite — Partie 4: Titre manque,2019-09-20,1,['23.020.35'],ISO/TC 58/SC 3,9599,,[88113],['en'],20,"<p>This document addresses the topic of cyclic fatigue of structural reinforcing fibres as used in composite cylinders, and cyclic fatigue of structural and non-structural liners in these cylinders. This document provides a basic level of understanding of these topics.</p>"

51236,TR,,ISO/TR 13154:2009,"Medical electrical equipment — Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph","Équipement électrique médical — Déploiement, mise en oeuvre et lignes directrices opérationnelles pour l'identification d'êtres humains fébriles en utilisant un thermographe de criblage",2009-03-18,1,['11.040.55'],ISO/TC 121/SC 3,9599,,[69347],['en'],18,"<p>ISO/TR 13154:2009 provides general guidelines for the deployment, implementation and operation of a screening thermograph intended to be used for individual non-invasive febrile temperature screening of humans under indoor environmental conditions to prevent the sp

28309,TR,,ISO/TR 13298:1998,Ships and marine technology — Vocabulary of general terms,Navires et technologie maritime — Vocabulaire de termes généraux,1998-12-20,1,"['01.040.47','47.020.01']",ISO/TC 8/SC 8,9599,,[65440],['en'],81,

53705,TR,,ISO/TR 13329:2012,Nanomaterials — Preparation of material safety data sheet (MSDS),Nanomatériaux — Préparation des feuilles de données de sécurité des matériaux (MSDS),2012-12-10,1,"['13.100','07.120']",ISO/TC 229,9599,,[83654],"['en','fr','ru']",22,"<p>ISO/TR 13329:2012 provides guidance on the development of content for, and consistency in, the communication of information on safety, health and environmental matters in safety data sheets (SDS) for substances classified as manufactured nanomaterials and for chemical products containing manufactured nanomaterials. It provides supplemental guidance to ISO 11014:2009 on the preparation of SDSs generally, addressing the preparation of

21748,TR,,ISO/TR 13345:1994,Industrial automation systems — Specification of subsets of the protocol for ISO/IEC 9506,Systèmes d'automation industrielle — Spécification de sous-ensembles du protocole pour l'ISO/CEI 9506,1994-07-07,1,['25.040.40'],ISO/TC 184/SC 5,9599,,[28059],['en'],81,

21763,TR,,ISO/TR 13353:1994,Diesel fuel and petrol filters for internal combustion engines — Initial efficiency by particule counting retention capacity and gravimetric efficiency,"Filtres à carburant pour moteurs à combustion interne à essence ou diesel — Efficacité initiale par comptage des particules, capacité de rétention et efficacité gravimétrique",1994-10-06,1,['43.060.40'],ISO/TC 22,9599,,[35892],"['en','fr']",21,"<p>Specifies a test procedure for evaluation of the initial efficiency, the efficiency evolution during clogging and the retention capacity of a fuel filter for internal combustion engines submitted to a constant flowrate of test liquid. Applies to filters having a rated fl

21926,TR,,ISO/TR 13409:1996,Sterilization of health care products — Radiation sterilization — Substantiation of 25 kGy as a sterilization dose for small or infrequent production batches,Stérilisation des produits de santé — Stérilisation par irradiation — Justification d'une dose de stérilisation de 25 kGy pour des lots de fabrication de faible volume ou intermittents,1996-12-19,1,['11.080.01'],ISO/TC 198,9599,,[36708],"['en','fr']",19,"<p>Describes a method of substantiating the suitability of 25 kGy as a sterilization dose for radiation sterilization of health care products with an average bioburden of less than 1 000 colony forming units (cfu), that are manufactured in small quantities.</

21990,TR,,ISO/TR 13425:1995,Guide for the selection of statistical methods in standardization and specification,Guide pour la sélection des méthodes statistiques en normalisation et en spécifications,1995-11-23,1,['03.120.30'],ISO/TC 69,9599,,[38715],"['en','fr']",21,<p>Describes the International Standards and guides for the selection of statistical methods prepared by ISO/TC 69. Annex A gives a survey of the content of the referenced standards and contains technical abstracts of all these documents.</p>

38715,TR,,ISO/TR 13425:2003,Guidelines for the selection of statistical methods in standardization and specification,Lignes directrices pour la sélection des méthodes statistiques en normalisation et en spécifications,2003-11-12,2,['03.120.30'],ISO/TC 69,9599,[21990],[43007],['en'],28,"<p>ISO/TR 13425:2003 gives guidance on the selection and an overview of all the referenced standards, guides, technical reports and DIS developed by ISO/TC 69 from a user prospective. DIS are drafts which can be amended. Both categories are documents, which are available to the public. ISO/TR 13425:2003 also gives two descriptions of the content of the standards by two sets of abstracts: non-technical abstract

25120,TR,,ISO/TR 13434:1998,Geotextiles and geotextile-related products — Guidelines on durability,Géotextiles et produits apparentés — Lignes directrices concernant la durabilité,1998-12-20,1,['59.080.70'],ISO/TC 221,9599,,"[34161,42713]",['en'],31,

22003,TR,,ISO/TR 13438:1999,Geotextiles and geotextile-related products— Screening test method for determining the resistance to oxidation at elevated oxygen pressure,Géotextiles et produits apparentés — Méthode de détermination de la résistance à l'oxydation à pression d'oxygène élevée,1999-02-25,1,['59.080.70'],ISO/TC 221,9599,,[36898],['en'],5,

22129,TR,,ISO/TR 13499:1998,Road vehicles — Data exchange format for impact tests,Véhicules routiers — Format d'échange de données pour les essais de choc,1998-12-17,1,['43.020'],ISO/TC 22,9599,,[35966],"['en','fr']",6,

22170,TR,,ISO/TR 13530:1997,Water quality — Guide to analytical quality control for water analysis,Qualité de l'eau — Guide de contrôle qualité analytique pour l'analyse de l'eau,1997-09-11,1,['13.060.45'],ISO/TC 147/SC 2,9599,,[52910],"['en','fr']",71,

22286,TR,,ISO/TR 13569:1996,"Banking, securities and other financial services — Information security guidelines","Banque, valeurs mobilières et autres services financiers — Lignes directrices pour la sécurité de l'information",1996-11-14,1,['03.060'],ISO/TC 68/SC 2,9599,,[29380],['en'],57,

29380,TR,,ISO/TR 13569:1997,Banking and related financial services — Information security guidelines,Banque et services financiers liés aux opérations bancaires — Lignes directrices pour la sécurité de l'information,1997-10-08,2,['03.060'],ISO/TC 68/SC 2,9599,[22286],[37245],"['en','fr']",96,

31315,TR,Amd,ISO/TR 13569:1997/Amd 1:1998,Banking and related financial services — Information security guidelines — Amendment 1,Banque et services financiers liés aux opérations bancaires — Lignes directrices pour la sécurité de l'information — Amendement 1,1998-12-20,2,['03.060'],ISO/TC 68/SC 2,9599,,[37245],['en'],3,

34602,TR,,ISO/TR 13570:2001,Guidelines for the application of the ISO 7176 series on wheelchairs,Lignes directrices pour l'application de la série ISO 7176 sur les fauteuils roulants,2001-01-18,1,['11.180.10'],ISO/TC 173/SC 1,9599,,[41686],['en'],69,

22403,TR,,ISO/TR 13618:1993,Code of practice for the safe operation of work-holding chucks used on lathes,Lignes directrices pour l'utilisation sûre des mandrins porte-pièce de tour,1993-10-21,1,['25.060.20'],ISO/TC 39/SC 8,9599,,[23334],['en'],52,

23798,TR,,ISO/TR 13637:1997,Petroleum and natural gas industries — Mooring of mobile offshore drilling units (MODUS) — Design and analysis,Industries du pétrole et du gaz naturel — Amarrage d'unités mobiles de forage en mer — Conception et analyse,1997-12-11,1,['75.180.10'],ISO/TC 67/SC 7,9599,,[39068],['en'],107,

22336,TR,,ISO/TR 13739:1998,Petroleum products — Methods for specifying practical procedures for the transfer of bunker fuels to ships,Produits pétroliers — Méthode pour spécifier les procédures pratiques de transfert dans les navires des combustibles de soute,1998-10-22,1,['75.180.30'],ISO/TC 28/SC 2,9599,,[43387],"['en','fr']",16,

22844,TR,,ISO/TR 13763:1994,Safety and performance criteria for seamless gas cylinders,Critères de performance et de sécurité pour les bouteilles à gaz sans soudures,1994-07-21,1,['23.020.35'],ISO/TC 58/SC 3,9599,,[45766],['en'],30,"<p>Offers guidance towards the preparation of future gas cylinder standards, revisions to existing gas cylinder standards, and identifies aspects of design criteria and tests which are recognized as providing information relevant to the safety and performance in service of seamless gas cylinders of water capacities between 0,5 l and 150 l. These principles shall also be applied, where possible, to cylinders with water capacities outside of the limits stated. Wher

27207,TR,Cor,ISO/TR 13763:1994/Cor 1:1996,Safety and performance criteria for seamless gas cylinders — Technical Corrigendum 1,Critères de performance et de sécurité pour les bouteilles à gaz sans soudures — Rectificatif technique 1,1996-06-06,1,['23.020.35'],ISO/TC 58/SC 3,9599,,[45766],['en'],1,<p>Replaces the first formula in subclause 5.5.</p>

22599,TR,,ISO/TR 13843:2000,Water quality — Guidance on validation of microbiological methods,Qualité de l'eau — Lignes directrices pour la validation des méthodes microbiologiques,2000-06-01,1,['07.100.20'],ISO/TC 147/SC 4,9599,,[62979],"['en','fr']",47,

23414,TR,,ISO/TR 13950:1997,Plastics pipes and fittings — Automatic recognition systems for electrofusion,Tubes et raccords en matières plastiques — Procédés de reconnaissance automatique d'un électrosoudage,1997-11-27,1,"['23.040.45','23.040.20']",ISO/TC 138/SC 4,9599,,[42220],"['en','fr']",60,

23576,TR,,ISO/TR 13989-2:2000,"Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears — Part 2: Integral temperature method","Calcul de la capacité de charge au grippage des engrenages cylindriques, coniques et hypoïdes — Partie 2: Méthode de la température intégrale",2000-03-23,1,['21.200'],ISO/TC 60/SC 2,9599,,[73530],"['en','fr']",48,

29067,TR,,ISO/TR 140-13:1997,Acoustics — Measurement of sound insulation in buildings and of building elements — Part 13: Guidelines,Acoustique — Mesurage de l'isolement acoustique des immeubles et des éléments de construction — Partie 13: Lignes directrices,1997-09-04,1,['91.120.20'],ISO/TC 43/SC 2,9599,,[45538],['en'],79,

26956,TR,,ISO/TR 14025:2000,Environmental labels and declarations — Type III environmental declarations,Marquage et déclarations environnementaux — Déclarations environnementales de type III,2000-03-16,1,['13.020.50'],ISO/TC 207/SC 3,9599,,[38131],"['en','fr']",25,

23150,TR,,ISO/TR 14032:1999,Environmental management — Examples of environmental performance evaluation (EPE),Management environnemental — Exemples d'évaluation de la performance environnementale (EPE),1999-11-18,1,['13.020.10'],ISO/TC 207/SC 4,9599,,[53955],['en'],93,

31026,TR,,ISO/TR 14047:2003,Environmental management — Life cycle impact assessment — Examples of application of ISO 14042,Management environnemental — Evaluation de l'impact du cycle de vie — Exemples d'application de l'ISO 14042,2003-10-13,1,"['13.020.10','13.020.60']",ISO/TC 207/SC 5,9599,,[57109],['en'],87,<p>ISO/TR 14047:2003 provides examples to illustrate current practice in carrying out a life cycle impact assessment in accordance with ISO 14042. These are only examples of the total possible 'ways' to satisfy the provisions of ISO 14042. They reflect the key elements of the life cycle impact assessment (LCIA) phase of the LCA. </p><p>NOTE The examples presented in ISO/TR 14047:2003 a

29834,TR,,ISO/TR 14049:2000,Environmental management — Life cycle assessment — Examples of application of ISO 14041 to goal and scope definition and inventory analysis,Management environnemental — Analyse du cycle de vie — Exemples d'application de l'ISO 14041 traitant de la définition de l'objectif et du champ d'étude et analyse de l'inventaire,2000-03-30,1,"['13.020.10','13.020.60']",ISO/TC 207/SC 5,9599,,[57110],"['en','fr']",43,

43280,TR,,ISO/TR 14069:2013,Greenhouse gases — Quantification and reporting of greenhouse gas emissions for organizations — Guidance for the application of ISO 14064-1,Gaz à effet de serre — Quantification et rapport des émissions de gaz à effet de serre pour les organisations — Directives d'application de l'ISO 14064-1,2013-04-18,1,['13.020.40'],ISO/TC 207/SC 7,9599,,[86109],"['en','es','fr','ru']",88,"<p>ISO/TR 14069:2013 describes the principles, concepts and methods relating to the quantification and reporting of direct and indirect greenhouse gas (GHG) emissions for an organization. It provides guidance for the application of ISO 14064-1 to greenhouse gas inventories at the organization

61116,TR,,ISO/TR 14073:2016,Environmental management — Water footprint — Illustrative examples on how to apply ISO 14046,Management environnemental — Empreinte eau — Exemples illustrant l'application de l'ISO 14046,2016-08-19,1,"['13.020.10','13.020.60']",ISO/TC 207/SC 5,9599,,[72264],['en'],62,"<p>ISO/TR 14073:2016 provides illustrative examples of how to apply ISO 14046, in order to assess the water footprint of products, processes and organizations based on life cycle assessment.</p><p>The examples are presented to demonstrate particular aspects of the application of ISO 14046 and therefore do not present all of the details of an entire water footprint study report as required by ISO 1404

35607,TR,,ISO/TR 14105:2001,Electronic imaging — Human and organizational issues for successful Electronic Image Management (EIM) implementation,Imagerie électronique — Aspects humains et organisationnels pour la mise en oeuvre réussie de la gestion d'image électronique,2001-10-18,1,['37.080'],ISO/TC 171/SC 2,9599,,[52072],['en'],20,

42712,TR,,ISO/TR 14121-2:2007,Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods,Sécurité des machines — Appréciation du risque — Partie 2: Lignes directrices pratiques et exemples de méthodes,2007-12-03,1,['13.110'],ISO/TC 199,9599,,[57180],"['en','fr']",71,"<p>ISO/TR 14121-2:2007 gives practical guidance on the conducting of risk assessments for machinery in accordance with ISO 14121-1 and describes various methods and tools for each step in the process.</p><p>It also provides practical guidance on risk reduction (in accordance with ISO 12100) for machinery, giving additional guidance on the selection of appropriate protective measures for achieving

54487,TR,,ISO/TR 14187:2011,Surface chemical analysis — Characterization of nanostructured materials,Analyse chimique des surfaces - Caractérisation des matériaux nanostructurés,2011-08-09,1,['71.040.40'],ISO/TC 201/SC 7,9599,,[74820],['en'],38,"<p>ISO/TR 14187 provides an introduction to (and some examples of) the types of information that can be obtained about nanostructured materials using surface-analysis tools. Of equal importance, both general issues or challenges associated with characterising nanostructured materials and the specific opportunities or challenges associated with individual methods are identified. As the size of objects or components of materials approaches a few nanome

24059,TR,,ISO/TR 14283:1995,Implants for surgery — Fundamental principles,Implants chirurgicaux — Principes fondamentaux,1995-03-16,1,['11.040.40'],ISO/TC 150,9599,,[37620],"['en','fr']",18,<p>Provides fundamental principles for the design and manufacture of active or non-active implants in order to achieve the intended purpose.</p>

37620,TR,,ISO/TR 14283:2004,Implants for surgery — Fundamental principles,Implants chirurgicaux — Principes fondamentaux,2004-07-08,2,['11.040.40'],ISO/TC 150,9599,[24059],[68007],['en'],15,<p>ISO/TR 14283 provides fundamental principles for the design and manufacture of active or non-active implants in order to achieve the intended purpose.</p>

24196,TR,,ISO/TR 14396:1996,Reciprocating internal combustion engines — Determination and method for the measurement of engine power,Moteurs à combustion interne — Détermination et méthode de mesure de la puissance,1996-12-05,1,['27.020'],ISO/TC 70,9599,,[32909],['en'],24,<p>Method of determining power of RIC engines as equipped when used for an exhaust emission test according to ISO 8178. Applicable to engines used to propel road construction and earth moving machines and industrial trucks.</p>

51227,TR,,ISO/TR 14521:2010,Gears — Calculation of load capacity of wormgears,Engrenages — Calcul de la capacité de charge des engrenages à vis,2010-11-11,1,['21.200'],ISO/TC 60/SC 1,9599,,"[70392,77340]","['en','fr']",89,"<p>ISO/TR 14521:2010 specifies equations for calculating the load capacity of cylindrical worm gears and covers load ratings associated with wear, pitting, worm deflection, tooth breakage and temperature. Scuffing and other failure modes are not covered by ISO/TR 14521:2010.</p><p>The load rating and design procedures are valid for sliding velocities over tooth surfaces of up to 25 m/s and contact ratios equal to or greater than 2,1. For wear, sliding velocities over toot

24844,TR,,ISO/TR 14577:1995,Metallic materials — Hardness test — Universal test,Matériaux métalliques — Essai de dureté — Essai universel,1995-12-07,1,['77.040.10'],ISO/TC 164/SC 3,9599,,"[32193,30543,30104]","['en','fr']",11,<p>Specifies the method of universal hardness test for metallic materials using indentation depths equal or greater than 3 m. Can also be used for all other materials.</p>

25016,TR,,ISO/TR 14638:1995,Geometrical product specification (GPS) — Masterplan,Spécification géométrique des produits (GPS) — Schéma directeur,1995-11-30,1,['17.040.01'],ISO/TC 213,9599,,[57054],"['en','fr']",21,<p>Gives the overview of the international standardization of Geometrical Product Specification (GPS). Explains the concept of GPS and provides a Masterplan of GPS including the existing and futural standards.</p>

25054,TR,,ISO/TR 14645:1998,Road vehicles — Test procedures for evaluating child restraint system interactions with deploying air bags,Véhicules routiers — Méthodes d'essais pour l'évaluation des interactions des systèmes de retenue pour enfants et des sacs gonflables en cours de déploiement,1998-04-02,1,['43.040.80'],ISO/TC 22,9599,,[64712],"['en','fr']",12,

24190,TR,,ISO/TR 14696:1999,"Reaction to fire tests — Determination of fire parameters of materials, products and assemblies using an intermediate-scale heat release calorimeter (ICAL)","Essais de réaction au feu — Détermination, à l'aide de calorimètre à échelle intermédiaire à dégagement de chaleur (ICAL), des paramètres relatifs au feu des matériaux, produits et ouvrages",1999-08-12,1,"['13.220.40','13.220.50']",ISO/TC 92/SC 1,9599,,[40903],['en'],44,

24932,TR,,ISO/TR 14697:1997,Fire tests — Guidance on the choice of substrates for building products,Essais au feu — Lignes directrices sur le choix de subjectiles pour les produits du bâtiment,1997-08-28,1,['13.220.50'],ISO/TC 92/SC 1,9599,,[40902],['en'],6,

54951,TR,,ISO/TR 14742:2010,Financial services — Recommendations on cryptographic algorithms and their use,Services financiers — Recommandations sur les algorithmes cryptographiques et leur utilisation,2010-06-18,1,"['03.060','35.240.40']",ISO/TC 68/SC 2,9599,,"[64548,71256,84609]",['en'],31,"<div id='MathJax_Message' style='display: none;'></div><p>ISO/TR 14742:2010 provides a list of recommended cryptographic algorithms for use within applicable financial services standards prepared by ISO/TC 68. It also provides strategic guidance on key lengths and associated parameters and usage dates.</p><p>The focus is on algorithms rather than protocols, and protocols are in general not included in I

38707,TR,,ISO/TR 14799-1:2005,Comparison of worldwide escalator and moving walk safety standards — Part 1: Rule by rule comparison,Comparaison des normes mondiales de sécurité des escaliers mécaniques et trottoirs roulants — Partie 1: Comparaison paragraphe par paragraphe,2005-09-23,1,['91.140.90'],ISO/TC 178,9599,,[62545],['en'],226,"<p>ISO TR 14799-1:2005 consists of a comparison of the requirements of selected topics as covered by the following world-wide safety standards (excluding local deviations):</p><p>a) Europe (CEN) -- EN 115; <i>Safety rules for the construction and installation of escalators and passenger conveyors</i> (Edition January 1995 and Amendment A1: 1998);</p><p>b) USA -

62545,TR,,ISO/TR 14799-1:2015,Comparison of worldwide escalator and moving walk safety standards — Part 1: Rule by rule comparison,Comparaison des normes mondiales de sécurité des escaliers mécaniques et trottoirs roulants — Partie 1: Comparaison paragraphe par paragraphe,2015-12-01,2,['91.140.90'],ISO/TC 178,9599,[38707],"[71219,81102]",['en'],166,"<p>ISO/TR 14799-1:2015 consists of a comparison of the requirements of selected topics as covered by the following worldwide safety standards (excluding local deviations):</p><p>a) Europe (CEN) ? EN 115‑1, <i>Safety of escalators and moving walks ? Part 1: Construction and installation</i> (Edition 2010, including Amendment 1);</p><p>b) North

38762,TR,,ISO/TR 14799-2:2005,Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments,Comparaison des normes mondiales de sécurité des escaliers mécaniques et trottoirs roulants — Partie 2: Comparaison abrégée et commentaires,2005-09-23,1,['91.140.90'],ISO/TC 178,9599,,[53959],['en'],112,"<p>ISO TR 14799-2:2005 consists of a comparison of the requirements of selected topics as covered by the following world-wide safety standards (excluding local deviations):</p><p>a) Europe (CEN) -- EN 115; <i>Safety rules for the construction and installation of escalators and passenger conveyors</i> (Edition January 1995 and Amendment A1: 1998);</p><

53959,TR,,ISO/TR 14799-2:2015,Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments,Comparaison des normes mondiales de sécurité des escaliers mécaniques et trottoirs roulants — Partie 2: Comparaison abrégée et commentaires,2015-12-01,2,['91.140.90'],ISO/TC 178,9599,[38762],"[71220,81101]",['en'],55,"<p>ISO/TR 14799-2:2015 consists of a comparison of the requirements of selected topics as covered by the following worldwide safety standards (excluding local deviations):</p><p>a) Europe (CEN) ? EN 115‑1, <i>Safety of escalators and moving walks ? Part 1: Construction and installation</i> (Edition 2010, including Amendment 1);</p><p>

29533,TR,,ISO/TR 14813-1:1999,Transport information and control systems — Reference model architecture(s) for the TICS sector — Part 1: TICS fundamental services,Systèmes de commande et d'information des transports — Architecture(s) de modèle de référence pour le secteur TICS — Partie 1: Services fondamentaux TICS,1999-07-22,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[43664],['en'],12,

29535,TR,,ISO/TR 14813-5:1999,Transport information and control systems — Reference model architecture(s) for the TICS sector — Part 5: Requirements for architecture description in TICS standards,Systèmes de commande et d'information des transports — Architecture(s) de modèle de référence pour le secteur TICS — Partie 5: Exigences pour la description d'architecture dans les normes TICS,1999-07-22,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[46008],['en'],10,

30622,TR,,ISO/TR 14813-6:2000,Transport information and control systems — Reference model architecture(s) for the TICS sector — Part 6: Data presentation in ASN.1,Systèmes de commande et d'information des transports — Architecture(s) du modèle de référence du secteur TICS — Partie 6: Présentation de données dans ASN.1,2000-12-21,1,"['35.240.60','03.220.01']",ISO/TC 204,9599,,[45939],['en'],13,

25627,TR,,ISO/TR 14825:1996,Geographic Data Files (GDF),Fichiers de données géographiques,1996-12-12,1,"['35.240.70','03.220.01']",ISO/TC 204,9599,,[30763],['en'],440,<p>Specifies a system for the interchange of digital road related geographic information. It takes into account all the requirements of application in the road transport and traffic telematics (RTTT) field.</p>

65714,TR,,ISO/TR 14872:2019,Health informatics — Identification of medicinal products — Core principles for maintenance of identifiers and terms,Informatique de santé — Identification des médicaments — Principes essentiels pour la mise à jour des identifiants et des termes,2019-07-12,1,['35.240.80'],ISO/TC 215,9599,,[86405],['en'],9,<p>The purpose of this document is to describe the core principles and proposed service delivery model for supporting implementation and ongoing maintenance of IDMP terminologies. </p><p>The information provided in this document can be used as evaluation and/or design criteria when considering current or future operations and service level agreements for system

25215,TR,,ISO/TR 14904:1997,Road transport and traffic telematics — Automatic fee collection (AFC) — Interface specification for clearing between operators,Transport routier et télématique du trafic — Prélèvement automatique de frais (AFC) — Spécification d'interface pour clarification entre opérateurs,1997-05-15,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[35986],['en'],36,"La présente prénorme définit les interfaces permettant la compensation entre exploitants et elle donne un plan type pour la structure des messages communs et des données à utiliser sur les interfaces. Elle a pour objectif de permettre le transfert des paiements et des données concernant le recouvrement automatique des

25217,TR,,ISO/TR 14906:1998,Road Transport and Traffic Telematics (RTTT) — Electronic Fee Collection (EFC) — Application interface definition for dedicated short range communications,Télématique de la circulationet du transport routier — Perception du télépéage — L'interface applicative relative aux communications dédiées aux courtes portées,1998-12-20,1,"['35.240.60','03.220.20']",ISO/TC 204,9599,,[35987],['en'],65,

25965,TR,,ISO/TR 14933:2001,Road vehicles — Test procedures for evaluating occupant interactions with deploying side impact airbags,Véhicules routiers — Méthodes d'essai pour évaluer les interactions de l'occupant avec les sacs gonflables latéraux en cours de déploiement,2001-11-15,1,['43.020'],ISO/TC 22,9599,,[59798],"['en','fr']",20,

39933,TR,,ISO/TR 14999-2:2005,Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 2: Measurement and evaluation techniques,Optique et photonique — Mesurage interférométrique de composants et systèmes optiques — Partie 2: Mesurage et techniques d'évaluation,2005-03-16,1,['37.020'],ISO/TC 172/SC 1,9599,,[69952],['en'],59,"<p>ISO/TR 14999-2:2005 gives fundamental explanations to interferometric measurement objects, describes hardware aspects of interferometers and evaluation methods, and gives recommendations for test reports and calibration certificates.</p>"

38939,TR,,ISO/TR 15031-2:2004,"Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 2: Terms, definitions, abbreviations and acronyms","Véhicules routiers — Communications entre un véhicule et un équipement externe pour le diagnostic relatif aux émissions — Partie 2: Termes, définitions, abréviations et acronymes",2004-09-07,1,"['13.040.50','43.040.10','01.040.43']",ISO/TC 22,9599,,[50815],"['en','fr']",43,"<p>ISO/TR 15031-2 is a guide to terms, definitions, abbreviations and acronyms used in emissions-related diagnostics, with respect to the communication between road vehicles and external equipment used in that field. It also specifi

26366,TR,,ISO/TR 15069:1997,Series 1 freight containers — Handling and securing — Rationale for ISO 3874 Annex A,Conteneurs de la série 1 — Manutention et fixation — Complément à l'annexe A de l'ISO 3874,1997-12-25,1,['55.180.10'],ISO/TC 104/SC 1,9599,,[74299],"['en','fr']",6,

41163,TR,,ISO/TR 15144-1:2010,Calculation of micropitting load capacity of cylindrical spur and helical gears — Part 1: Introduction and basic principles,Calcul de la capacité de charge aux micropiqûres des engrenages cylindriques à dentures droite et hélicoïdale — Partie 1: Introduction et principes fondamentaux,2010-12-13,1,['21.200'],ISO/TC 60/SC 2,9599,,[64038],"['en','fr']",56,"<p>ISO/TR 15144-1:2010 describes a procedure for the calculation of the micropitting load capacity of cylindrical gears with external teeth. It has been developed on the basis of testing and observation of oil-lubricated gear transmissions with modules between 3 mm and 11 mm and pitch line velocities of 8 m/s to

64038,TR,,ISO/TR 15144-1:2014,Calculation of micropitting load capacity of cylindrical spur and helical gears — Part 1: Introduction and basic principles,Calcul de la capacité de charge aux micropiqûres des engrenages cylindriques à dentures droite et hélicoïdale — Partie 1: Introduction et principes fondamentaux,2014-08-25,2,['21.200'],ISO/TC 60/SC 2,9599,[41163],[73528],"['en','fr']",35,"<p>ISO/TR 15144-1:2014 describes a procedure for the calculation of the micropitting load capacity of cylindrical gears with external teeth. It has been developed on the basis of testing and observation of oil-lubricated gear transmissions with modules between 3 mm and 11 mm and pitch line velocities of 8

55370,TR,,ISO/TR 15144-2:2014,Calculation of micropitting load capacity of cylindrical spur and helical gears — Part 2: Examples of calculation for micropitting,Calcul de la capacité de charge aux micropiqûres des engrenages cylindriques à dentures droite et hélicoïdale — Partie 2: Exemples de calcul pour micropiqûres,2014-10-13,1,['21.200'],ISO/TC 60/SC 2,9599,,[73532],"['en','fr']",47,<p>ISO/TR 15144-2:2014 gives example calculations presented for guidance on the application of ISO/TR 15144-1 only. Any of the values or the data presented are not intended to be used as material or lubricant allowables or as recommendations for micro-geometry in real applications when applying this procedure

39353,TR,,ISO/TR 15155:2005,Test facilities for agricultural irrigation equipment,Installations d'essais pour le matériel agricole d'irrigation,2005-05-11,1,['65.060.35'],ISO/TC 23/SC 18,9599,,[61216],['en'],15,"<p>ISO/TR 15155:2005 is intended to provide guidance on the design, selection, installation and use of the equipment required to establish basic test facilities for irrigation equipment evaluation. Its purpose is to provide information sufficient to complement the detailed procedures included in ISO 9261, ISO 15886, ISO 7714, ISO 9635, ISO 9644, ISO 9911, ISO 9952 and ISO 10522 for the testing of agricultural irrigation system components, specifically: emitters, sprinklers and valves

26496,TR,,ISO/TR 15223:1998,"Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied","Dispositifs médicaux — Symboles à utiliser avec les étiquettes, l'étiquetage et les informations à fournir relatifs aux dispositifs médicaux",1998-10-15,1,"['01.080.99','11.040.01']",ISO/TC 210,9599,,[31349],['en'],6,

27448,TR,,ISO/TR 15377:1998,Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of nozzles and orifice plates beyond the scope of ISO 5167-1,Mesurage du débit des fluides au moyen d'appareils déprimogènes — Lignes directrices pour les spécifications des tuyères et diaphragmes non couverts par l'ISO 5167-1,1998-05-14,1,['17.120.10'],ISO/TC 30/SC 2,9599,,[40029],['en'],21,

32379,TR,Cor,ISO/TR 15377:1998/Cor 1:1999,Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of nozzles and orifice plates beyond the scope of ISO 5167-1 — Technical Corrigendum 1,Mesurage du débit des fluides au moyen d'appareils déprimogènes — Lignes directrices pour les spécifications des tuyères et diaphragmes non couverts par l'ISO 5167-1 — Rectificatif technique 1,1999-07-08,1,['17.120.10'],ISO/TC 30/SC 2,9599,,[40029],['en'],1,

40029,TR,,ISO/TR 15377:2007,"Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167","Mesurage du débit des fluides au moyen d'appareils déprimogènes — Lignes directrices pour la spécification des diaphragmes, des tuyères et des tubes Venturi non couverts par l'ISO 5167",2007-01-18,2,['17.120.10'],ISO/TC 30/SC 2,9599,"[27448,32379]",[68740],['en'],26,"<p>ISO/TR 15377:2007 describes the geometry and method of use for conical-entrance orifice plates, quarter-circle orifice plates, eccentric orifice plates and Venturi tubes with 10,5 degree convergent angles. Recommendations

68740,TR,,ISO/TR 15377:2018,"Measurement of fluid flow by means of pressure-differential devices — Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167","Mesurage du débit des fluides au moyen d'appareils déprimogènes — Lignes directrices pour la spécification des diaphragmes, des tuyères et des tubes de Venturi non couverts par l'ISO 5167",2018-01-05,3,['17.120.10'],ISO/TC 30/SC 2,9599,[40029],[85585],"['en','fr']",31,"<p>ISO/TR 15377:2018 describes the geometry and method of use for conical-entrance orifice plates, quarter-circle orifice plates, eccentric orifice plates and Venturi tubes with 10,5° convergent angles. Recommendations are

27046,TR,,ISO/TR 15462:1997,Water quality — Selection of tests for biodegradability,Qualité de l'eau — Sélection d'essais de biodégradabilité,1997-09-25,1,['13.060.70'],ISO/TC 147/SC 5,9599,,[40718],"['en','fr']",10,

35845,TR,,ISO/TR 15489-2:2001,Information and documentation — Records management — Part 2: Guidelines,Information et documentation — << Records Management >> — Partie 2: Guide pratique,2001-09-28,1,['01.140.20'],ISO/TC 46/SC 11,9599,,[62541],"['en','fr']",39,

55441,TR,,ISO/TR 15499:2012,Biological evaluation of medical devices — Guidance on the conduct of biological evaluation within a risk management process,Évaluation biologique des dispositifs médicaux — Directives relatives à la conduite d'une évaluation biologique au sein d'un procédé de management du risque,2012-07-10,1,['11.100.20'],ISO/TC 194,9599,,[69217],"['en','fr','ru']",14,

27298,TR,,ISO/TR 15510:1997,Stainless steels — Chemical composition,Aciers inoxydables — Composition chimique,1997-10-23,1,['77.140.20'],ISO/TC 17/SC 4,9599,,[33025],"['en','fr']",12,

28389,TR,,ISO/TR 15608:2000,Welding — Guidelines for a metallic materials grouping system,Soudage — Lignes directrices pour un système de groupement des matériaux métalliques,2000-04-06,1,['25.160.01'],ISO/TC 44/SC 10,9599,,[39109],"['en','fr']",7,