Withdrawn and superseded ISO standards — page 188 of 246

5424,IS,,ISO 984:1974,Sodium hydroxide for industrial use — Determination of silica content — Reduced silico-molybdic complex photometric method,Hydroxyde de sodium à usage industriel — Dosage de la silice — Méthode photométrique au complexe silicomolybdique réduit,1974-12-01,1,['71.060.40'],ISO/TC 47,9599,,[5425],"['en','fr']",3,"<p>The method is applicable to products having silica contents exceeding 10 mg/kg. The principle is based on the formation of yellow oxidized silico-molybdic complex in a strongly acid medium, in the presence of boric acid to suppress interference by fluorides. Selective reduction of this complex with a mixture of aminonaphtholsulphonic acid (4-amino-3-hydroxynapht

17719,IS,,ISO 9841:1991,Oil of Hyssop (Hyssopus officinalis Linnaeus),Huile essentielle d'hysope (Hyssopus officinalis Linnaeus),1991-08-15,1,['71.100.60'],ISO/TC 54,9599,,[41618],"['en','fr']",2,"<p>Specifies certain characteristics in order to facilitate the assessment of quality. Describes requirements, sampling, methods of test, packaging, labelling and marking.</p>"

41618,IS,,ISO 9841:2007,Oil of hyssop (Hyssopus officinalis L. ssp. officinalis),Huile essentielle d'hysope (Hyssopus officinalis L. ssp. officinalis),2007-07-25,2,['71.100.60'],ISO/TC 54,9599,[17719],[57475],"['en','fr']",6,"<p>ISO 9841 specifies certain characteristics of essential oil of hyssop (<i>Hyssopus officinalis </i>L. ssp. <i>officinalis</i>), with a view to facilitating the assessment of its quality.</p>"

17720,IS,,ISO 9842:1991,Oil of rose (Rosa damascena P.Miller),Huile essentielle de rose (Rosa damascena P.Miller),1991-06-20,1,['71.100.60'],ISO/TC 54,9599,,[28611],"['en','fr']",3,

28611,IS,,ISO 9842:2003,Oil of rose (Rosa x damascena Miller),Huile essentielle de rose (Rosa x damascena Miller),2003-09-08,2,['71.100.60'],ISO/TC 54,9599,[17720],"[81571,86897]","['en','fr']",7,"<p>ISO 9842:2003 specifies certain characteristics of the oil of rose (<i>Rosa </i>x<i> damascena</i> Miller) cultivated in Turkey, Morocco and Bulgaria, of the Rosaceae family, in order to facilitate assessment of its quality.</p>"

17721,IS,,ISO 9843:1991,Oil of cedarwood (Cupressus funebris Endlicher),Huile essentielle de bois de cèdre (Cupressus funebris Endlicher),1991-05-16,1,['71.100.60'],ISO/TC 54,9599,,"[30965,28337]","['en','fr']",4,"<p>Specifies certain characteristics in order to facilitate the assessment of quality. Describes requirements, sampling, methods of test, packaging, labelling and marking. Annex A is for information only.</p>"

17722,IS,,ISO 9844:1991,Oil of bitter orange (Citrus aurantium Linnaeus ssp. aurantium),Huile essentielle d'orange amère (Citrus aurantium Linnaeus ssp. aurantium),1991-10-10,1,['71.100.60'],ISO/TC 54,9599,,[37053],"['en','fr']",4,"<p>Specifies certain characteristics in order to facilitate the assessment of quality. Describes requirements, sampling, methods of test, packaging, labelling and marking. Annex A is for information only.</p>"

17723,IS,,ISO 9845-1:1992,"Solar energy — Reference solar spectral irradiance at the ground at different receiving conditions — Part 1: Direct normal and hemispherical solar irradiance for air mass 1,5","Énergie solaire — Rayonnement solaire spectral de référence au sol sous différentes conditions de réception — Partie 1: Rayonnement solaire direct normal et hémisphérique pour une masse d'air de 1,5",1992-10-01,1,['27.160'],ISO/TC 180/SC 1,9599,,"[52980,79989]",['en'],14,"<p>Provides an appropriate standard spectral irradiance distribution to be used in determining relative performance of solar thermal, photovoltaic, and other system components and materials where the direct and hemispherica

17724,IS,,ISO 9846:1993,Solar energy — Calibration of a pyranometer using a pyrheliometer,Énergie solaire — Étalonnage d'un pyranomètre utilisant un pyrhéliomètre,1993-11-25,1,['27.160'],ISO/TC 180/SC 1,9599,,[84176],['en'],20,"<p>Its use is mandatory for the calibration of secondary standard pyranometers according to ISO 9060, and is recommended for the calibration of pyranometers which are used as reference instruments in comparisons. Is intended for use by test institutions or test laboratories equipped with well-maintained pyrheliometers and is applicable to all pyranometers. The object is to promote the uniform application of reliable methods to calibrate pyranometers, since accurate ca

17725,IS,,ISO 9847:1992,Solar energy — Calibration of field pyranometers by comparison to a reference pyranometer,Énergie solaire — Étalonnage des pyranomètres de terrain par comparaison à un pyranomètre de référence,1992-06-25,1,['27.160'],ISO/TC 180/SC 1,9599,,[78800],['en'],15,"<p>Specifies two preferred methods: the outdoor calibration (with the pyranometer in a horizontal position, in a tilted position, or at normal incidence) and the indoor calibration (using an integrating sphere with shaded or unshaded lamp, or at normal incidence). Applicable to most types of field pyranometers regardless of the type of radiation receptor employed.</p>"

17726,IS,,ISO 9848:1993,Photography — Source document microfilms — Determination of ISO speed and ISO average gradient,Photographie — Microfilms de prise de vues — Détermination de la sensibilité ISO et du contraste moyen ISO,1993-04-29,1,"['37.040.20','37.080']",ISO/TC 42,9599,,[34534],"['en','fr']",7,"<p>The method of determination specified is based on exposing and processing samples, measuring density from the resultant images to produce a sensitometric curve from which values are taken and used to determine ISO speed and ISO average gradient. Applies to black-and-white camera negative photographic films used for first generation microfilming of source documents at exposure times typical

22949,IS,Cor,ISO 9848:1993/Cor 1:1994,Photography — Source document microfilms — Determination of ISO speed and ISO average gradient — Technical Corrigendum 1,Photographie — Microfilms de prise de vues — Détermination de la sensibilité ISO et du contraste moyen ISO — Rectificatif technique 1,1994-01-27,1,['37.040.20'],ISO/TC 42,9599,,[34534],"['en','fr']",1,"<p>Replaces 'G' with 'G bar' throughout subclause 6.2.2, table 2 and subclause 7.2.</p>"

17727,IS,,ISO 9849:1991,Optics and optical instruments — Geodetic instruments — Vocabulary,Optique et intruments d'optique — Instruments géodésiques — Vocabulaire,1991-12-18,1,"['01.040.17','17.180.30']",ISO/TC 172/SC 6,9599,,[28063],"['en','fr']",4,

28063,IS,,ISO 9849:2000,Optics and optical instruments — Geodetic and surveying instruments — Vocabulary,Optique et intruments d'optique — Instruments géodésiques et d'observation — Vocabulaire,2000-10-26,2,"['01.040.17','17.180.30']",ISO/TC 172/SC 6,9599,[17727],"[57603,65084]","['en','fr']",31,

65084,IS,,ISO 9849:2017,Optics and optical instruments — Geodetic and surveying instruments — Vocabulary,Optique et intruments d'optique — Instruments géodésiques et d'observation — Vocabulaire,2017-07-31,3,"['01.040.17','17.180.30']",ISO/TC 172/SC 6,9599,[28063],[87647],['en'],21,"<p>ISO 9849:2017 defines terms relating to geodetic field instruments only, e.g. distance meters, levels, theodolites and others, and their essential component parts which are normally used in terrestrial measuring operations of ordnance survey, topographic survey, plane survey and engineering survey. Therefore, terms concerning fields such as the following are not mentioned, for example, photogrammetry, astronomy

17730,IS,,ISO 9852:1995,Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane resistance at specified temperature (DCMT) — Test method,Tubes en poly(chlorure de vinyle) non plastifié (PVC-U) — Résistance au dichlorométhane à une température spécifiée (DCMT) — Méthode d'essai,1995-06-15,1,['23.040.20'],ISO/TC 138/SC 5,9599,,[43862],"['en','fr']",4,"<p>Specifies a method for determining the resistance of unplasticized PVC pipes to dichloromethane at a specified temperature (DCMT). The method can be used for any homogeneous plain-walled unplasticized-PVC pipes, irrespective of their intended application. It can be used as a rapid means of quality control during manufacture.</p>" 17

17732,IS,,ISO 9854-1:1994,Thermoplastics pipes for the transport of fluids — Determination of pendulum impact strength by the Charpy method — Part 1: General test method,Tubes thermoplastiques pour le transport des fluides — Détermination de la résistance aux chocs pendulaires par la méthode Charpy — Partie 1: Méthode générale d'essai,1994-12-08,1,['23.040.20'],ISO/TC 138/SC 5,9599,,[75968],"['en','fr']",5,"<p>Specifies the general test method to be used for the determination of the impact strength of unnotched test pieces cut from thermoplastics pipes for the transport of fluids. Not intended to be a reference test method for the determination of the impact strength of pipes. May be used fo

17733,IS,,ISO 9854-2:1994,Thermoplastics pipes for the transport of fluids — Determination of pendulum impact strength by the Charpy method — Part 2: Test conditions for pipes of various materials,Tubes thermoplastiques pour le transport des fluides — Détermination de la résistance aux chocs pendulaires par la méthode Charpy — Partie 2: Conditions d'essai pour différentes matières constitutives de tubes,1994-12-08,1,['23.040.20'],ISO/TC 138/SC 5,9599,,[75969],"['en','fr']",4,"<p>Specifies the values or options chosen for the test parameters, i. e. the impact energy, test piece dimensions, shape and spacing of the test piece supports, and type of test piece, for testing the impact resistance

17735,IS,,ISO 9856:1989,Conveyor belts — Determination of elastic modulus,Courroies transporteuses — Détermination du module d'élasticité,1989-06-22,1,['53.040.20'],ISO/TC 41/SC 3,9599,,[27296],"['en','fr']",4,"<p>Specifies a method for determining the elastic modulus which is notably used in the calculation of transition distances in accordance with ISO 5293. Describes the principle, the apparatus, the test pieces, the procedure, and the expression of results; shows how to set report. A figure contains a graph of the variation of amplitude of the load as a function of elongation.</p>"

27296,IS,,ISO 9856:2003,Conveyor belts — Determination of elastic and permanent elongation and calculation of elastic modulus,Courroies transporteuses — Détermination de l'allongement élastique et permanent et calcul du module d'élasticité,2003-12-10,2,['53.040.20'],ISO/TC 41/SC 3,9599,[17735],"[70275,61046]","['en','fr']",6,<p>ISO 9856:2003 specifies a method for determining the elastic and permanent elongation of a conveyor belt and the calculation of the elastic modulus. It is not applicable or valid for light conveyor belts as described in EN 873.</p>

55641,IS,Amd,ISO 9856:2003/Amd 1:2012,Conveyor belts — Determination of elastic and permanent elongation and calculation of elastic modulus — Amendment 1,Courroies transporteuses — Détermination de l'allongement élastique et permanent et calcul du module d'élasticité — Amendement 1,2012-06-22,2,['53.040.20'],ISO/TC 41/SC 3,9599,,"[70275,61046]","['en','fr']",4,

5427,IS,,ISO 986:1976,Sodium hydroxide for industrial use — Determination of calcium content — EDTA (disodium salt) complexometric method,Hydroxyde de sodium à usage industriel — Dosage du calcium — Méthode complexométrique à l'EDTA (sel disodique),1976-05-01,1,['71.060.40'],ISO/TC 47,9599,,[5428],"['en','fr']",3,"<p>The method is applicable to products having a calcium content equal to or greater than 0.002 % (m/m). The principle consists in titration of the calcium with a standard volumetric solution of the disodium salt of (ethylenedinitrilo)tetraacetic acid (EDTA disodium salt) in the presence of 2,2'-(ethylenedinitrilo)diphenol Äglyoxal-bis-(2-hydroxyanil)Ü as indicator, after eliminat

17739,IS,,ISO 9862:1990,Geotextiles — Sampling and preparation of test specimens,Géotextiles — Échantillonnage et préparation des éprouvettes,1990-07-12,1,['59.080.70'],ISO/TC 221,9599,,[37443],"['en','fr']",2,

37443,IS,,ISO 9862:2005,Geosynthetics — Sampling and preparation of test specimens,Géosynthétiques — Échantillonnage et préparation des éprouvettes,2005-02-10,2,['59.080.70'],ISO/TC 221,9599,[17739],[80095],"['en','fr']",5,"<p>ISO 9862:2005 establishes general principles for the sampling of geosynthetics delivered to construction sites, and for the preparation of test specimens from the samples.</p><p>The sampling principles are applicable to geosynthetics supplied in rolls.</p><p>The specimen-preparation principles are applicable to all geosynthetics.</p>"

37769,IS,,ISO 9863-1:2005,Geosynthetics — Determination of thickness at specified pressures — Part 1: Single layers,Géosynthétiques — Détermination de l'épaisseur à des pressions spécifiées — Partie 1: Couches individuelles,2005-02-08,1,['59.080.70'],ISO/TC 221,9599,[17740],[59641],"['en','fr']",6,"<p>ISO 9863-1:2005 specifies a method for the determination of the thickness of geosynthetics at specified pressures and defines the pressure at which the nominal thickness is determined.</p><p>The test results are intended for identification purposes and for use in technical data sheets and/or as part of other test methods, e.g. tests of hydraulic properties.</p><p>The method is applicable to all

17740,IS,,ISO 9863:1990,Geotextiles — Determination of thickness at specified pressures,Géotextiles — Détermination de l'épaisseur à des pressions prescrites,1990-09-27,1,['59.080.70'],ISO/TC 221,9599,,"[37769,23854]","['en','fr']",3,

17741,IS,,ISO 9864:1990,Geotextiles — Determination of mass per unit area,Géotextiles — Détermination de la masse surfacique,1990-09-13,1,['59.080.70'],ISO/TC 221,9599,,[37444],"['en','fr']",2,

17745,IS,,ISO 9867:1991,Textiles — Evaluation of the wrinkle recovery of fabrics — Appearance method,Textiles — Évaluation de la défroissabilité de tissus — Méthode d'évaluation de l'aspect,1991-10-10,1,['59.080.30'],ISO/TC 38/SC 2,9599,,[52983],"['en','fr']",5,"<p>Contains a method in order to evaluate the appearance of textile fabrics after induced wrinkling. Describes the principle, the apparatus, the atmospheres for conditioning and testing, the test specimens, the test procedure, the evaluation and the contents of the test report.</p>"

52983,IS,,ISO 9867:2009,Textiles — Evaluation of the wrinkle recovery of fabrics — Appearance method,Textiles — Évaluation de la défroissabilité des étoffes — Méthode d'évaluation de l'aspect,2009-07-02,2,['59.080.30'],ISO/TC 38/SC 2,9599,"[46322,17745]",[81252],"['en','fr']",22,<p>ISO 9867:2009 describes a method for evaluating the appearance of textile fabrics after induced wrinkling. It is applicable to fabrics made from any fibre or combination of fibres.</p>

17746,IS,,ISO 9869:1994,Thermal insulation — Building elements — In-situ measurement of thermal resistance and thermal transmittance,Isolation thermique — Éléments de construction — Mesurage in situ de la résistance thermique et du coefficient de transmission thermique,1994-07-21,1,['91.120.10'],ISO/TC 163/SC 1,9599,,"[52249,59697,52248]","['en','fr']",24,"<p>Describes the heat flowmeter method for the measurement of the thermal transmission properties (thermal resistance and thermal conductance from surface to surface, total thermal resistance and transmittance from environment to environment) of plane building components, primarily consisting of opaque layers perpendicular to the heat flow

17750,IS,,ISO 9873:1990,Reusable metal dental mirrors and handles,Miroirs et manches de miroirs dentaires métalliques réutilisables,1990-08-23,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[25936],"['en','fr']",6,

25936,IS,,ISO 9873:1998,Dental hand instruments — Reusable mirrors and handles,Instruments dentaires à main — Miroirs et manches de miroirs réutilisables,1998-10-29,2,['11.060.20'],ISO/TC 106/SC 4,9599,[17750],[66109],"['en','fr']",10,

33885,IS,Cor,ISO 9873:1998/Cor 1:2000,Dental hand instruments — Reusable mirrors and handles — Technical Corrigendum 1,Instruments dentaires à main — Miroirs et manches de miroirs réutilisables — Rectificatif technique 1,2000-06-29,2,['11.060.20'],ISO/TC 106/SC 4,9599,,[66109],"['en','fr']",2,

66109,IS,,ISO 9873:2017,Dentistry — Intra-oral mirrors,Médecine bucco-dentaire — Miroirs endobuccaux,2017-04-21,3,['11.060.20'],ISO/TC 106/SC 4,9599,"[25936,33885]",[76997],"['en','fr']",11,"<p>ISO 9873:2017 specifies requirements and test methods for reusable intra-oral mirrors with a coated glass reflecting surface used for dental purposes in the oral cavity.</p><p>In addition, specific requirements for metallic casing and metallic handles are given.</p>"

17751,IS,,ISO 9874:1992,Milk — Determination of total phosphorus content — Method using molecular absorption spectrometry,Détermination de la teneur en phosphore total du lait — Méthode par spectrométrie d'absorption moléculaire,1992-01-23,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[42702],"['en','fr']",5,"<p>Specifies the principle, the reagents, the apparatus, the sampling and the preparation of the test sample, the test procedure, the expression of results, the precision and the test report.</p>"

17752,IS,,ISO 9875:1991,Shipbuilding — Marine echo-sounding equipment,Construction navale — Appareils de sondage par écho,1991-05-16,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[23067],"['en','fr']",11,

23067,IS,,ISO 9875:1996,Ships and marine technology — Marine echo-sounding equipment,Navires et technologie maritime — Appareils de sondage par écho,1996-08-01,2,['47.020.70'],ISO/TC 8/SC 6,9599,[17752],[30977],"['en','fr']",13,

30977,IS,,ISO 9875:2000,Ships and marine technology — Marine echo-sounding equipment,Navires et technologie maritime — Appareils de sondage par écho,2000-11-02,3,['47.020.70'],ISO/TC 8/SC 6,9599,[23067],[74751],"['en','fr','ru']",21,

43877,IS,Cor,ISO 9875:2000/Cor 1:2006,Ships and marine technology — Marine echo-sounding equipment — Technical Corrigendum 1,Navires et technologie maritime — Appareils de sondage par écho — Rectificatif technique 1,2006-02-15,3,['47.020.70'],ISO/TC 8/SC 6,9599,,[74751],"['en','ru']",1,

17753,IS,,ISO 9876:1989,Shipbuilding — Marine facsimile receivers for meteorological charts,Construction navale — Récepteurs marins de transmissions par télécopie des cartes météorologiques,1989-12-07,1,['47.020.70'],ISO/TC 8/SC 6,9599,,[17754],"['en','fr']",6,

17754,IS,,ISO 9876:1997,Ships and marine technology — Marine facsimile receivers for meteorological charts,Navires et technologie maritime — Récepteurs marins de transmissions par télécopie des cartes météorologiques,1997-06-19,2,['47.020.70'],ISO/TC 8/SC 6,9599,[17753],[66059],"['en','fr']",7,

17767,IS,,ISO 9886:1992,Evaluation of thermal strain by physiological measurements,Évaluation de l'astreinte thermique par mesures physiologiques,1992-10-21,1,['13.180'],ISO/TC 159/SC 5,9599,,[34110],"['en','fr']",14,"<p>Describes methods for measuring and interpreting body core temperature, skin temperature, heart rate, and body mass loss. Annex A presents a comparison of the different methods concerning their field of application, their technical complexity, the discomfort and the risks. The measurement techniques are described in annex B, limit values are proposed in annex C.</p>"

17769,IS,,ISO 9888:1991,Water quality — Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium — Static test (Zahn-Wellens method),"Qualité de l'eau — Évaluation, en milieu aqueux, de la biodégradabilité aérobie des composés organiques — Essai statique (Méthode Zahn-Wellens)",1991-10-17,1,['13.060.70'],ISO/TC 147/SC 5,9599,,[28121],"['en','fr']",7,

17776,IS,,ISO 9895:1989,Paper and board — Compressive strength — Short span test,Papier et carton — Résistance à la compression — Essai à faible écartement,1989-12-07,1,['85.060'],ISO/TC 6/SC 2,9599,,[41400],"['en','fr']",5,<p>Specifies a method for the determination of the compressive strength in the machine and cross directions of paper and board using a short span compression tester. Applies to papers and boards used for the manufacture of containers and boxes. May also be used for laboratory sheets prepared for the testing of pulp.</p>

17778,IS,,ISO 9897-1:1990,Freight containers — Container equipment data exchange (CEDEX) — Part 1: General communication codes,Conteneurs pour le transport de marchandises — Échange de données sur les équipements de conteneurs (CEDEX) — Partie 1: Codes des communications générales,1990-08-23,1,['55.180.10'],ISO/TC 104,9599,,[20455],"['en','fr']",57,

17780,IS,,ISO 9897-3:1990,Freight containers — Container equipment data exchange (CEDEX) — Part 3: Message types for electronic data interchange,Conteneurs pour le transport de marchandises — Échange de données sur les équipements de conteneurs (CEDEX) — Partie 3: Messages types pour l'échange de données informatisées,1990-09-13,1,['55.180.10'],ISO/TC 104,9599,,[20455],"['en','fr']",26,

3766,IS,,ISO 99:1975,Pulleys for flat transmission belts — Diameters,Poulies pour courroies plates de transmission — Diamètres,1975-05-01,1,['21.220.10'],ISO/TC 41,9599,,[3609],"['en','fr']",2,

17785,IS,,ISO 9902:1993,Textile machinery acoustics — Determination of sound pressure levels and sound power levels emitted by textile machines — Engineering and survey methods,Acoustique du matériel pour l'industrie textile — Détermination des niveaux de pression acoustique et des niveaux de puissance acoustique émis par les machines textiles — Méthodes d'expertise et de contrôle,1993-12-16,1,"['59.120.01','17.140.20']",ISO/TC 72/SC 8,9599,,"[27844,27848,27845,27849,27846,27850,27847]","['en','fr']",25,

27849,IS,,ISO 9902-6:2001,Textile machinery — Noise test code — Part 6: Fabric manufacturing machinery,Matériel pour l'industrie textile — Code d'essai acoustique — Partie 6: Machines de production des étoffes,2001-03-29,1,"['59.120.30','17.140.20']",ISO/TC 72/SC 8,9599,[17785],[74975],"['en','fr']",14,

46511,IS,Amd,ISO 9902-6:2001/Amd 1:2009,Textile machinery — Noise test code — Part 6: Fabric manufacturing machinery — Amendment 1,Matériel pour l'industrie textile — Code d'essai acoustique — Partie 6: Machines de production des étoffes — Amendement 1,2009-03-16,1,"['59.120.30','17.140.20']",ISO/TC 72/SC 8,9599,,[74975],"['en','fr']",2,

62379,IS,Amd,ISO 9902-6:2001/Amd 2:2014,Textile machinery — Noise test code — Part 6: Fabric manufacturing machinery — Amendment 2,Matériel pour l'industrie textile — Code d'essai acoustique — Partie 6: Machines de production des étoffes — Amendement 2,2014-06-02,1,"['59.120.30','17.140.20']",ISO/TC 72/SC 8,9599,,[74975],"['en','fr']",1,

17786,IS,,ISO 9903:1991,Textile machinery and accessories — Wires for metallic card clothing,Matériel pour l'industrie textile — Fils pour garnitures de carde,1991-12-20,1,['59.120.10'],ISO/TC 72/SC 1,9599,,"[27639,27640]","['en','fr']",4,"<p>Specifies the dimensions, tolerances, hardness and designation of three types of wires.</p>"

17787,IS,,ISO 9904:1989,Textile machinery and accessories — Steel pins for spinning preparatory and spinning machinery,Matériel pour l'industrie textile — Pointes en acier pour les matériels de préparation de filature et de filature,1989-11-16,1,['59.120.10'],ISO/TC 72/SC 1,9599,,[26971],"['en','fr']",6,

17789,IS,,ISO 9906:1999,Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1 and 2,Pompes rotodynamiques — Essais de fonctionnement hydraulique pour la réception — Niveaux 1 et 2,1999-12-16,1,['23.080'],ISO/TC 115/SC 2,9599,"[7494,8959]",[41202],"['en','fr']",61,

17793,IS,,ISO 9911:1993,Agricultural irrigation equipment — Manually operated small plastics valves,Matériel agricole d'irrigation — Petites vannes en matière plastique commandées manuellement,1993-02-11,1,['65.060.35'],ISO/TC 23/SC 18,9599,,[39765],"['en','fr']",8,"<p>Specifies the general requirements and test methods. Applies to valves of nominal sizes up to and including 90 mm (3 in). The valves are intended for installation in irrigation piping networks, using water at temperatures up to 50 °C at nominal pressures as designated by the manufacturer.</p>"

39765,IS,,ISO 9911:2006,Agricultural irrigation equipment — Manually operated small plastics valves,Matériel agricole d'irrigation — Petites vannes en matière plastique commandées manuellement,2006-11-08,2,['65.060.35'],ISO/TC 23/SC 18,9599,[17793],[79138],['en'],12,"<p>ISO 9911:2006 specifies the general requirements and test methods for manually operated small plastics valves intended for operation in agricultural irrigation systems. It is applicable to manually operated plastics valves of nominal sizes DN 8 (1/4') to DN 100 (4'). The valves are intended for installation in irrigation piping networks, using water at temperatures up to 60 °C. Nominal pressures of the valves are as designate

17794,IS,,ISO 9912-2:1992,Agricultural irrigation equipment — Filters — Part 2: Strainer-type filters,Matériel agricole d'irrigation — Filtres — Partie 2: Filtres à tamis,1992-12-17,1,['65.060.35'],ISO/TC 23/SC 18,9599,,[39769],"['en','fr']",6,"<p>Specifies the general construction requirements and test methods (resistance of strainer to internal hydrostatic pressure, resistance of strainer to internal hydrostatic pressure at high temperature, resistance of filter element to buckling or tearing, tightness of filter element, clean pressure drop). Does not cover filtration ability, efficiency and capacity, nor deals with filters that have integrated automatic self-cleaning devices.</p>" 17795,

17795,IS,,ISO 9912-3:1992,Agricultural irrigation equipment — Filters — Part 3: Automatic self-cleaning strainer-type filters,Matériel agricole d'irrigation — Filtres — Partie 3: Filtres à tamis à autonettoyage automatique,1992-12-17,1,['65.060.35'],ISO/TC 23/SC 18,9599,,[39770],"['en','fr']",6,"<p>Specifies the general construction requirements and test methods (performance tests of new filters, performance test of filters following simulated use). Does not cover filtration ability, efficiency and capacity.</p>"

17796,IS,,ISO 9913-1:1996,Optics and optical instruments — Contact lenses — Part 1: Determination of oxygen permeability and transmissibility with the FATT method,Optique et instruments d'optique — Lentilles de contact — Partie 1: Détermination de la perméabilité à l'oxygène et de la transmissibilité de l'oxygène avec la méthode FATT,1996-11-07,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[34480],"['en','fr']",13,<p>Describes a polarographic method for the determination of oxygen permeability and oxygen transmissibility of contact lenses. Specifies the procedures for making the measurements and establishes the conditions for the measurements.</p>

26921,IS,,ISO 9913-2:2000,Optics and optical instruments — Contact lenses — Part 2: Determination of oxygen permeability and transmissibility by the coulometric method,Optique et instruments d'optique — Lentilles de contact — Partie 2: Détermination de la perméabilité à l'oxygène et de la transmissibilité de l'oxygène avec la méthode coulométrique,2000-02-17,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[34480],"['en','fr']",11,

17797,IS,,ISO 9914:1995,Optics and optical instruments — Contact lenses — Determination of refractive index of contact lens materials,Optique et instruments d'optique — Lentilles de contact — Détermination de l'indice de réfraction des matériaux des lentilles de contact,1995-11-23,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[34480],"['en','fr']",3,<p>Gives a reference test method for determining the refractive index of contact lens materials. Alternative methods may be used provided that repeatability and accuracy are at least equal to those specified herein.</p>

32186,IS,,ISO 9917-1:2003,Dentistry — Water-based cements — Part 1: Powder/liquid acid-base cements,Art dentaire — Ciments à base d'eau — Partie 1: Ciments acido-basiques liquides/en poudre,2003-11-04,1,['11.060.10'],ISO/TC 106/SC 1,9599,"[17800,22131]",[45818],"['en','fr']",22,"<p>ISO 9917-1:2003 specifies requirements and test methods for powder/liquid acid-base dental cements intended for permanent cementation, lining and restoration. It is applicable to both hand-mixed cements and encapsulated cements for mechanical mixing. It specifies limits for each of the properties according to whether the cement is intended for use as a luting agent, a restorative material, a base or a liner.</p><p

45818,IS,,ISO 9917-1:2007,Dentistry — Water-based cements — Part 1: Powder/liquid acid-base cements,Art dentaire — Ciments à base d'eau — Partie 1: Ciments acido-basiques liquides/en poudre,2007-10-03,2,['11.060.10'],ISO/TC 106/SC 1,9599,[32186],[76037],"['en','fr']",23,"<p>ISO 9917-1:2007 specifies requirements and test methods for powder/liquid acid-base dental cements intended for permanent cementation, lining and restoration. ISO 9917-1:2007 is applicable to both hand-mixed and capsulated cements for mechanical mixing. ISO 9917-1:2007 specifies limits for each of the properties according to whether the cement is intended for use as a luting agent, a base or liner or as a restorative mate

17800,IS,,ISO 9917:1991,Dental water-based cements,Ciments dentaires à base d'eau,1991-12-17,1,['11.060.10'],ISO/TC 106/SC 1,9599,"[9845,6161,9374,9414,14240,6160]",[32186],"['en','fr']",13,"<p>Specifies requirements for dental cements as follows: silicate cements, zinc phosphate cements, silicophosphate cements, zinc polycarbonate cements and glass polyalkenoate cements.</p>"

22131,IS,Cor,ISO 9917:1991/Cor 1:1993,Dental water-based cements — Technical Corrigendum 1,Ciments dentaires à base d'eau — Rectificatif technique 1,1993-05-13,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[32186],"['en','fr']",1,"<p>Changes, at both chemical type entries for zinc phosphate in table 1, the erosion limit from 0,1 to 1,0.</p>"

27498,IS,,ISO 9917-2:1998,Dental water-based cements — Part 2: Light-activated cements,Ciments dentaires hydrauliques — Partie 2: Ciments photo-activés,1998-07-02,1,['11.060.10'],ISO/TC 106/SC 1,9599,,[45497],"['en','fr']",14,

45497,IS,,ISO 9917-2:2010,Dentistry — Water-based cements — Part 2: Resin-modified cements,Médecine bucco-dentaire — Ciments à base d'eau — Partie 2: Ciments modifiés par addition de résine,2010-04-12,2,['11.060.10'],ISO/TC 106/SC 1,9599,[27498],[69901],"['en','fr']",19,"<p>ISO 9917‑2:2010 specifies requirements and test methods for dental cements that are intended for luting, base or lining and restoration purposes and for which the materials are water-based and set by multiple reactions in which setting is achieved by a combination of an acid-base reaction and polymerization.</p>"

17801,IS,,ISO 9918:1993,Capnometers for use with humans — Requirements,Capnomètres pour utilisation chez l'homme — Prescriptions,1993-02-18,1,['11.040.10'],ISO/TC 121/SC 1,9599,,"[33779,34637]","['en','fr']",23,"<p>Specifies requirements for the safety of capnometers and refers to and is applicable in conjunction with IEC 601-1 (Safety of medical electrical equipment, General safety requirements). Applies to capnometers used with adults, children and neonates. Does not apply to devices intended for use as transcutaneous monitors or intended for use in laboratory research applications.</p>"

17802,IS,,ISO 9919:1992,Pulse oximeters for medical use — Requirements,Oxymètres de pouls à usage médical — Prescriptions,1992-07-23,1,['11.040.10'],ISO/TC 121/SC 3,9599,,[33780],"['en','fr']",16,"<p>This Particular Standard refers to IEC 601-1 and specifies the requirements for safety. The field of application includes, but is not limited to perioperative use, adult critical care application, paediatric and neonatal applications, general determination of saturation on hospitalized and non-hospitalized patients. Annex A gives a rationale.</p>"

33780,IS,,ISO 9919:2005,Medical electrical equipment — Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use,Appareils électromédicaux — Règles particulières de sécurité et performances essentielles du matériel utilisé pour les oxymètres de pouls à usage médical,2005-03-15,2,['11.040.10'],ISO/TC 121/SC 3,9599,[17802],[51847],"['en','fr','ru']",81,"<p>For the purposes of ISO 9919:2005, the Scope given in IEC 60601-1:1988 (Clause 1) applies, except as follows.</p><p><i>Amendment (add at the end of 1.1):</i></p><p>ISO 9919:2005 specifies particular requirements for the basic safety and essential performance of <b>pulse oximeter equipm

17803,IS,,ISO 9920:1995,Ergonomics of the thermal environment — Estimation of the thermal insulation and evaporative resistance of a clothing ensemble,Ergonomie des ambiances thermiques — Détermination de l'isolement thermique et de la résistance à l'évaporation d'une tenue vestimentaire,1995-02-23,1,['13.180'],ISO/TC 159/SC 5,9599,,[39257],"['en','fr']",54,"<p>Gives methods for estimating the thermal characteristics (resistance to dry heat loss and evaporative heat loss) in steady-state conditions for a clothing ensemble based on values for known garments, ensembles and textiles. Does not deal with other effects of clothing, such as adsorption of water, buffering, tactile comfort. Does not

17805,IS,,ISO 9921-1:1996,Ergonomic assessment of speech communication — Part 1: Speech interference level and communication distances for persons with normal hearing capacity in direct communication (SIL method),Évaluation ergonomique de la communication parlée — Partie 1: Niveau d'interférence avec la parole et les distances de communication pour des personnes ayant une capacité d'audition normale en communication directe (méthode SIL),1996-10-24,1,['13.180'],ISO/TC 159/SC 5,9599,,[33589],"['en','fr']",10,"<p>Provides a method for prediction of the effectiveness of speech communication in the presence of noise generated by machinery as well as in noisy environment. Parameters are the ambie

17809,IS,,ISO 9924-1:1993,"Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers","Caoutchouc et produits en caoutchouc — Détermination de la composition des vulcanisats et des mélanges non vulcanisés par thermogravimétrie — Partie 1: Caoutchoucs butadiène, copolymères et terpolymères éthylène-propylène, isobutène-isoprène et butadiène-styrène",1993-07-01,1,['83.060'],ISO/TC 45,9599,,[32071],"['en','fr']",5,

32071,IS,,ISO 9924-1:2000,"Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers","Caoutchouc et produits à base de caoutchouc — Détermination de la composition des vulcanisats et des mélanges non vulcanisés par thermogravimétrie — Partie 1: Caoutchoucs butadiène, copolymères et terpolymères éthylène-propylène, isobutène-isoprène, isoprène et butadiène-styrène",2000-12-07,2,['83.060'],ISO/TC 45/SC 2,9599,[17809],"[70333,42351]",['en'],8,

70333,IS,,ISO 9924-1:2016,"Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers","Caoutchouc et produits à base de caoutchouc — Détermination de la composition des vulcanisats et des mélanges non vulcanisés par thermogravimétrie — Partie 1: Caoutchoucs butadiène, copolymères et terpolymères éthylène-propylène, isobutène-isoprène, isoprène et butadiène-styrène",2016-07-18,3,['83.060'],ISO/TC 45/SC 2,9599,[32071],[84139],['en'],9,"<p>ISO 9924-1:2016 specifies a thermogravimetric method for the determinati

17810,IS,,ISO 9924-2:2000,Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 2: Acrylonitrile-butadiene and halobutyl rubbers,Caoutchouc et produits à base de caoutchouc — Détermination de la composition des vulcanisats et mélanges non vulcanisés par thermogravimétrie — Partie 2: Caoutchoucs acrylonitrile-butadiène et butyl halogéné,2000-09-14,1,['83.060'],ISO/TC 45/SC 2,9599,,"[42351,70335]",['en'],9,

57741,IS,Amd,ISO 9924-2:2000/Amd 1:2012,Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 2: Acrylonitrile-butadiene and halobutyl rubbers — Amendment 1,Caoutchouc et produits à base de caoutchouc — Détermination de la composition des vulcanisats et mélanges non vulcanisés par thermogravimétrie — Partie 2: Caoutchoucs acrylonitrile-butadiène et butyl halogéné — Amendement 1,2012-07-06,1,['83.060'],ISO/TC 45/SC 2,9599,,[70335],['en'],1,

44151,IS,,ISO 9924-3:2009,"Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction","Caoutchouc et produits à base de caoutchouc — Détermination de la composition des vulcanisats et des mélanges non vulcanisés par thermogravimétrie — Partie 3: Caoutchoucs hydrocarbonés, caoutchoucs halogénés et caoutchoucs polysiloxanes après extraction",2009-03-02,1,['83.060'],ISO/TC 45/SC 2,9599,,[81316],"['en','fr']",16,"<p>ISO 9924-3:2009 specifies a thermogravimetric method for the determination of the main constituents of rubber compounds such as e

34030,IS,,ISO 9926-3:2005,Cranes — Training of drivers — Part 3: Tower cranes,Appareils de levage à charge suspendue — Formation des conducteurs — Partie 3: Grues à tour,2005-04-11,1,"['03.100.30','53.020.20']",ISO/TC 96/SC 7,9599,,[66764],"['en','fr']",7,<p>ISO 9926-3:2005 covers the specific subjects considered necessary for training tower crane drivers.</p>

17817,IS,,ISO 9927-1:1994,Cranes — Inspections — Part 1: General,Appareils de levage à charge suspendue — Vérifications — Partie 1: Généralités,1994-11-17,1,['53.020.20'],ISO/TC 96/SC 5,9599,,[44184],"['en','fr']",4,"<p>Specifies the regular inspections to be carried out on cranes as defined in ISO 4306-1, ISO 4306-2 and ISO 4306-3.</p>"

44184,IS,,ISO 9927-1:2009,Cranes — Inspections — Part 1: General,Appareils de levage à charge suspendue — Vérifications — Partie 1: Généralités,2009-01-06,2,['53.020.20'],ISO/TC 96/SC 5,9599,[17817],[51102],"['en','fr','ru']",7,<p>ISO 9927-1:2009 specifies the inspections to be carried out on cranes as defined in ISO 4306-1. It does not cover the inspections carried out prior to the first use of the crane.</p>

38734,IS,,ISO 9927-3:2005,Cranes — Inspections — Part 3: Tower cranes,Appareils de levage à charge suspendue — Vérifications — Partie 3: Grues à tour,2005-08-10,1,['53.020.20'],ISO/TC 96/SC 7,9599,,[72670],"['en','fr']",24,<p>ISO 9927-3:2005 specifies the regular inspections to be carried out on tower cranes. It is intended to be used in conjunction with ISO 9927-1. It does not cover inspection prior to the first use of a tower crane.</p>

17818,IS,,ISO 9928-1:1990,Cranes — Crane driving manual — Part 1: General,Appareils de levage à charge suspendue — Manuel à l'usage des conducteurs — Partie 1: Généralités,1990-11-15,1,['53.020.20'],ISO/TC 96/SC 5,9599,,[67238],"['en','fr']",3,"<p>Gives guidance on the contents and the presentation of a crane driving manual which include: technical data, special safety advice, driver's aids and controls, driver's instructions, load diagrams and load tables, safety devices, environmental conditions.</p>"

39183,IS,,ISO 9928-2:2007,Cranes — Crane driving manual — Part 2: Mobile crane operators,Appareils de levage à charge suspendue — Manuel à l'usage des conducteurs — Partie 2: Opérateurs de grues mobiles,2007-07-05,1,['53.020.20'],ISO/TC 96/SC 6,9599,,[67358],"['en','fr']",4,<p>ISO 9928-2:2007 specifies the contents of a crane driving manual for the operators of mobile cranes as defined in ISO 4306-2.</p>

17826,IS,,ISO 9932:1990,Paper and board — Determination of water vapour transmission rate of sheet materials — Dynamic sweep and static gas methods,Papier et carton — Détermination du coefficient de transmission de la vapeur d'eau des matériaux en feuille — Méthode dynamique par balayage de gaz et méthode statique,1990-10-25,1,['85.060'],ISO/TC 6/SC 2,9599,,[80315],"['en','fr']",8,"<p>Depending on the method and specific apparatus employed, materials up to 38 mm thick and with water vapour transmission rates in the range 0,05 g/(m^2.d) to 65 g/(m^2.d) can be tested. The basis of the function of the instrumental techniques is briefly described. Advice on calibration is given in annex B. Speci

17827,IS,,ISO 9933:1995,Products in fibre-reinforced cement — Long corrugated or asymmetrical section sheets and fittings for roofing and cladding,Produits en ciment renforcé par des fibres — Plaques ondulées ou nervurées longues et leurs accessoires pour couvertures et revêtements,1995-02-16,1,['91.100.40'],ISO/TC 77,9599,,"[45829,46368]","['en','fr']",23,"<p>Lays down the technical characteristics of straight fibre-cement profiled sheets, of more than 0,9 m length, and their fibre-cement fittings used as roofing and cladding materials. Also specifies tests for checking these characteristics as well as marking and conditions of acceptance. Does not apply to asbestos-cement corrugated or pro

37634,IS,Amd,ISO 9933:1995/Amd 1:2004,Products in fibre-reinforced cement — Long corrugated or asymmetrical section sheets and fittings for roofing and cladding — Amendment 1,Produits en ciment renforcé par des fibres — Plaques ondulées ou nervurées longues et leurs accessoires pour couvertures et revêtements — Amendement 1,2004-09-21,1,['91.100.40'],ISO/TC 77,9599,,"[45829,46368]","['en','fr']",9,

32159,IS,Cor,ISO 9933:1995/Cor 1:1999,Products in fibre-reinforced cement — Long corrugated or asymmetrical section sheets and fittings for roofing and cladding — Technical Corrigendum 1,Produits en ciment renforcé par des fibres — Plaques ondulées ou nervurées longues et leurs accessoires pour couvertures et revêtements — Rectificatif technique 1,1999-05-06,1,['91.100.40'],ISO/TC 77,9599,,"[45829,46368]","['en','fr']",1,

42285,IS,Cor,ISO 9933:1995/Cor 2:2005,Products in fibre-reinforced cement — Long corrugated or asymmetrical section sheets and fittings for roofing and cladding — Technical Corrigendum 2,Produits en ciment renforcé par des fibres — Plaques ondulées ou nervurées longues et leurs accessoires pour couvertures et revêtements — Rectificatif technique 2,2005-06-07,1,['91.100.40'],ISO/TC 77,9599,,"[45829,46368]","['en','fr']",1,

33725,IS,,ISO 9934-1:2001,Non-destructive testing — Magnetic particle testing — Part 1: General principles,Essais non destructifs — Magnétoscopie — Partie 1: Principes généraux du contrôle,2001-12-20,1,['19.100'],ISO/TC 135/SC 2,9599,,[57715],"['en','fr']",14,

57715,IS,,ISO 9934-1:2015,Non-destructive testing — Magnetic particle testing — Part 1: General principles,Essais non destructifs — Magnétoscopie — Partie 1: Principes généraux du contrôle,2015-08-28,2,['19.100'],ISO/TC 135/SC 2,9599,[33725],[71070],"['en','fr']",16,"<p>ISO 9934-1:2015 specifies general principles for the magnetic particle testing of ferromagnetic materials. Magnetic particle testing is primarily applicable to the detection of surface-breaking discontinuities, particularly cracks. It can also detect discontinuities just below the surface but its sensitivity diminishes rapidly with depth.</p><p>This part of ISO 9934 specifies the surface preparation of the part to be tested,

32358,IS,,ISO 9934-2:2002,Non-destructive testing — Magnetic particle testing — Part 2: Detection media,Essais non destructifs — Magnétoscopie — Partie 2: Produits magnétoscopiques,2002-11-27,1,['19.100'],ISO/TC 135/SC 2,9599,,[57716],"['en','fr']",21,"<p>ISO 9934-2 specifies the significant properties of magnetic particle testing products (including magnetic ink, powder, carrier liquid, contrast aid paints) and the methods for checking their properties.</p><p>This document failed to convert</p>"

34905,IS,,ISO 9934-3:2002,Non-destructive testing — Magnetic particle testing — Part 3: Equipment,Essais non destructifs — Magnétoscopie — Partie 3: Équipement,2002-07-11,1,['19.100'],ISO/TC 135/SC 2,9599,,[57717],['en'],14,

17830,IS,,ISO 9936:1997,Animal and vegetable fats and oils — Determination of tocopherols and tocotrienols contents — Method using high-performance liquid chromatography,Corps gras d'origines animale et végétale — Détermination des teneurs en tocophérols et en tocotriénols — Méthode par chromatographie en phase liquide à haute performance,1997-12-18,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[38942],"['en','fr']",11,

38942,IS,,ISO 9936:2006,Animal and vegetable fats and oils — Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography,Corps gras d'origines animale et végétale — Détermination des teneurs en tocophérols et en tocotriénols par chromatographie en phase liquide à haute performance,2006-04-07,2,['67.200.10'],ISO/TC 34/SC 11,9599,[17830],[69595],"['en','fr','ru']",17,"<p>ISO 9936:2006 specifies a method for the determination of the contents of free alpha-, beta-, gamma- and delta-tocopherols and tocotrienols in animal and vegetable fats and oils by high-performance liquid chromatography. </p><p>For products containing tocopherol or tocotrienol esters, it is n

55882,IS,Amd,ISO 9936:2006/Amd 1:2011,Animal and vegetable fats and oils — Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography — Amendment 1: Updating of reagents and confirmation of statistical data validity,Corps gras d'origines animale et végétale — Détermination des teneurs en tocophérols et en tocotriénols par chromatographie en phase liquide à haute performance — Amendement 1: Mise à jour des réactifs et confirmation de la validité des données statistiques,2011-07-15,2,['67.200.10'],ISO/TC 34/SC 11,9599,,[69595],"['en','fr','ru']",2,

51917,IS,Cor,ISO 9936:2006/Cor 1:2008,Animal and vegetable fats and oils — Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography — Technical Corrigendum 1,Corps gras d'origines animale et végétale — Détermination des teneurs en tocophérols et en tocotriénols par chromatographie en phase liquide à haute performance — Rectificatif technique 1,2008-07-10,2,['67.200.10'],ISO/TC 34/SC 11,9599,,[69595],"['en','fr','ru']",1,

17832,IS,,ISO 9938:1990,"Aerospace — Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/28 000 kPa — Procurement specification","Aéronautique et espace — Tuyauteries flexibles en polytétrafluoroéthylène (PTFE), classification 204 degrés C/28 000 kPa — Spécification d'approvisionnement",1990-12-06,1,"['83.140','49.080']",ISO/TC 20/SC 10,9599,,[17833],"['en','fr']",13,

17833,IS,,ISO 9938:1994,"Aerospace — Polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/28 000 kPa — Procurement specification","Aéronautique et espace — Tuyauteries flexibles en polytétrafluoroéthylène (PTFE), classification 204 degrés C/28 000 kPa — Spécification d'approvisionnement",1994-12-15,2,"['83.140.40','49.080']",ISO/TC 20/SC 10,9599,[17832],"[68322,75274]","['en','fr']",14,<p>Cancels and replaces the first edition (1990). Specifies requirements for polytetrafluoroethylene hose assemblies for use in aircraft hydraulic systems at temperatures between -55 °C and +204 °C and at a nominal pressure up to 28 000 kPa. The hose assemblies are also suitable for use

5437,IS,,ISO 994:1973,"Potassium hydroxide for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method","Hydroxyde de potassium à usage industriel — Dosage du fer — Méthode photométrique à la 1,10- phénanthroline",1973-04-01,1,['71.060.40'],ISO/TC 47,9599,,[5438],"['en','fr']",2,"<p>Describes a method that is more sensitive and more widely used than the 2,2'-bipyridyl method. It is applicable to products having iron contents equal to or greater than 0.3 mg/kg. The principle is based on the reduction of iron(III) by hydroxylammonium chloride, formation of a iron(II)/1,10-phenanthroline complex in a buffered system. Photometric measurement of the coloured compl