Withdrawn and superseded ISO standards — page 173 of 246

15738,IS,,ISO 8513:2000,Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of longitudinal tensile properties,Systèmes de canalisations en plastiques — Tubes en plastiques thermodurcissables renforcés de verre (PRV) — Détermination des propriétés en traction longitudinale,2000-11-23,1,['23.040.20'],ISO/TC 138/SC 6,9599,,[53352],['en'],11,

53352,IS,,ISO 8513:2014,Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the apparent initial longitudinal tensile strength,Systèmes de canalisations en plastiques — Tubes en plastiques thermodurcissables renforcés de verre (PRV) — Méthodes d'essai pour la détermination de la force en traction longitudinale apparente,2014-04-29,2,['23.040.20'],ISO/TC 138/SC 6,9599,[15738],[66790],['en'],16,"<p>ISO 8513:2014 specifies three test methods for determining the longitudinal tensile properties of glass-reinforced thermosetting plastics (GRP) pipes. The properties which can be determined are: the longitudinal tensile strength and t

66790,IS,,ISO 8513:2016,Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength,Systèmes de canalisations en plastiques — Tubes en plastiques thermodurcissables renforcés de verre (PRV) — Méthodes d'essai pour la détermination de la force en traction longitudinale,2016-01-26,3,['23.040.20'],ISO/TC 138/SC 6,9599,[53352],[84122],['en'],11,"<p>ISO 8513:2016 specifies two test methods for determining the longitudinal tensile properties of glass-reinforced thermosetting plastics (GRP) pipes. The properties which can be determined are</p><p>- the longitudinal tensile strength, and</p><p>-

15739,IS,,ISO 8514-1:1992,Micrographics — Alphanumeric computer output microforms — Quality control — Part 1: Characteristics of the test slide and test data,Micrographie — Microformes COM alphanumériques — Contrôle de la qualité — Partie 1: Caractéristiques du cadre de surimpression et des données-test,1992-01-23,1,['37.080'],ISO/TC 171/SC 1,9599,,[28104],"['en','fr']",5,

15740,IS,,ISO 8514-2:1992,Micrographics — Alphanumeric computer output microforms — Quality control — Part 2: Method,Micrographie — Microformes COM alphanumériques — Contrôle de la qualité — Partie 2: Méthode,1992-01-23,1,['37.080'],ISO/TC 171/SC 1,9599,,[28105],"['en','fr']",8,

15741,IS,,ISO 8515:1991,Textile-glass-reinforced plastics — Determination of compressive properties in the direction parallel to the plane of lamination,Plastiques renforcés de fibres de verre textile — Détermination des caractéristiques en compression parallèlement au plan de stratification,1991-07-11,1,['83.120'],ISO/TC 61/SC 13,9599,,[23638],"['en','fr']",8,

15742,IS,,ISO 8516:1987,Textile glass — Textured yarns — Basis for a specification,Verre textile — Fils texturés — Base de spécification,1987-05-07,1,['59.100.10'],ISO/TC 61/SC 13,9599,,[55465],"['en','fr']",2,

15744,IS,,ISO 8518:1990,Workplace air — Determination of particulate lead and lead compounds — Flame atomic absorption spectrometric method,Air des lieux de travail — Dosage du plomb particulaire et des particules de composés de plomb — Méthode par spectrométrie d'absorption atomique dans la flamme,1990-12-06,1,['13.040.30'],ISO/TC 146/SC 2,9599,,[26501],"['en','fr']",10,<p>The method is applicable to the determination of masses of 10 µg to 200 µg of lead per sample using the normal procedure without dilution. The concentration range for lead in air for which this procedure is applicable is determined in part by the sampling procedure selected by the user. The method is applicable to persona

26501,IS,,ISO 8518:2001,Workplace air — Determination of particulate lead and lead compounds — Flame or electrothermal atomic absorption spectrometric method,Air des lieux de travail — Dosage du plomb particulaire et des composés particulaires du plomb — Méthode par spectrométrie d'absorption atomique dans la flamme ou méthode par spectrométrie d'absorption avec atomisation électrothermique,2001-12-20,2,['13.040.30'],ISO/TC 146/SC 2,9599,[15744],[78373],"['en','fr']",30,<p/>

15747,IS,,ISO 8521:1998,Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the apparent initial circumferential tensile strength,Systèmes de canalisations en matières plastiques — Tubes en plastiques thermodurcissables renforcés de verre (PRV) — Détermination de la résistance en traction circonférencielle initiale apparente,1998-12-20,1,['23.040.20'],ISO/TC 138/SC 6,9599,,[46535],['en'],17,

46535,IS,,ISO 8521:2009,Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the apparent initial circumferential tensile strength,Systèmes de canalisations en matières plastiques — Tubes en plastiques thermodurcissables renforcés de verre (PRV) — Méthodes d'essai pour la détermination de la résistance en traction circonférencielle initiale apparente,2009-08-06,2,['23.040.20'],ISO/TC 138/SC 6,9599,[15747],"[68569,75170]",['en'],18,"<p>ISO 8521:2009 specifies six test methods for the determination of the initial circumferential tensile wall strength per unit of length of glass-reinforced thermosetting plastics (GRP) pipes.</p><p

15749,IS,,ISO 8523:1991,Microbiology — General guidance for the detection of Enterobacteriaceae with pre-enrichment,Microbiologie — Directives générales pour la recherche des Enterobacteriaceae avec pré-enrichissement,1991-10-03,1,['07.100.01'],ISO/TC 34/SC 9,9599,,"[34566,34565]","['en','fr']",7,"<p>Describes the principle, the cultur media and reagent, the apparatus and glassware, the sampling, the test procedure, the expression of results, and the contents of the test report. Applies to products intended for human consumption or feeding of animals. Annex A forms an integral part of this standard.</p>"

15757,IS,,ISO 8528-1:1993,"Reciprocating internal combustion engine driven alternating current generating sets — Part 1: Application, ratings and performance","Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 1: Application, caractéristiques et performances",1993-04-22,1,"['27.020','29.160.40']",ISO/TC 70,9599,,[30567],"['en','fr']",10,"<p>Defines various classifications for the applications, ratings and performance which arise out of the combination of generating sets consisting of an RIC engine, a.c.generator, controlgear, switchgear and auxiliary equipment. Applies to a.c. generating sets for land and marine use, excluding generatin

30567,IS,,ISO 8528-1:2005,"Reciprocating internal combustion engine driven alternating current generating sets — Part 1: Application, ratings and performance","Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 1: Application, caractéristiques et performances",2005-06-07,2,"['27.020','29.160.40']",ISO/TC 70,9599,[15757],[68539],"['en','fr']",17,"<p>ISO 8528-1:2005 defines various classifications for the application, rating and performance of generating sets consisting of a Reciprocating Internal Combustion (RIC) engine, Alternating Current (a.c.) generator and any associated controlgear, switchgear and auxiliary equipment.</p><p>It appli

15766,IS,,ISO 8528-10:1998,Reciprocating internal combustion engine driven alternating current generating sets — Part 10: Measurement of airborne noise by the enveloping surface method,Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 10: Mesurage du bruit aérien par la méthode de la surface enveloppe,1998-09-24,1,"['27.020','17.140.20','29.160.40']",ISO/TC 70,9599,,[74983],"['en','fr']",17,

20681,IS,,ISO 8528-12:1997,Reciprocating internal combustion engine driven alternating current generating sets — Part 12: Emergency power supply to safety services,Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 12: Alimentation électrique de secours de services de sécurité,1997-09-11,1,"['13.100','27.020','29.160.40']",ISO/TC 70,9599,,[84054],"['en','fr']",12,

63595,IS,,ISO 8528-13:2016,Reciprocating internal combustion engine driven alternating current generating sets — Part 13: Safety,Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 13: Sécurité,2016-05-12,1,"['27.020','29.160.40']",ISO/TC 70,9599,,[85962],"['en','fr']",41,"<p>ISO 8528-13:2016 specifies the safety requirements for reciprocating internal combustion (RIC) engine driven generating sets up to 1 000 V consisting of an RIC engine, an alternating current (AC) generator including the additional equipment required for operating, e.g. controlgear, switchgear, auxiliary equipment.</p><p>It is applicable to generating sets for land an

15758,IS,,ISO 8528-2:1993,Reciprocating internal combustion engine driven alternating current generating sets — Part 2: Engines,Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 2: Moteurs,1993-04-22,1,"['27.020','29.160.40']",ISO/TC 70,9599,,[39044],"['en','fr']",10,"<p>Specifies the principal characteristics of an RIC engine when used for generating set applications. Applies to a.c. generating sets for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. For some specific applications (e.g. essential hospital supplies, high-rise buildings, etc.) supplementary requirements may be n

39044,IS,,ISO 8528-2:2005,Reciprocating internal combustion engine driven alternating current generating sets — Part 2: Engines,Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 2: Moteurs,2005-06-07,2,"['27.020','29.160.40']",ISO/TC 70,9599,[15758],[72526],"['en','fr']",12,"<p>ISO 8528-2:2005 specifies the principal characteristics of a Reciprocating Internal Combustion (RIC) engine when used for alternating current (a.c.) generating set applications. </p><p>It applies to RIC engines for a.c. generating sets for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. </p><p>For some s

15759,IS,,ISO 8528-3:1993,Reciprocating internal combustion engine driven alternating current generating sets — Part 3: Alternating current generators for generating sets,Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 3: Alternateurs pour groupes électrogènes,1993-04-22,1,"['27.020','29.160.20','29.160.40']",ISO/TC 70,9599,,[39045],"['en','fr']",13,"<p>Specifies the principal characteristics of a.c. generators under the control of their voltage regulators when used for generating set applications. Applies to a.c. generating sets for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomot

39045,IS,,ISO 8528-3:2005,Reciprocating internal combustion engine driven alternating current generating sets — Part 3: Alternating current generators for generating sets,Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 3: Alternateurs pour groupes électrogènes,2005-07-11,2,"['27.020','29.160.20','29.160.40']",ISO/TC 70,9599,[15759],[77444],"['en','fr']",15,"<p>ISO 8528-3:2005 specifies the principal characteristics of Alternating Current (a.c.) generators under the control of their voltage regulators when used in generating set applications. It supplements the requirements of IEC 60034-1.</p><p>ISO 8528-3:2005 applies to a.c. generato

15760,IS,,ISO 8528-4:1993,Reciprocating internal combustion engine driven alternating current generating sets — Part 4: Controlgear and switchgear,Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 4: Appareillage de commande et de coupure,1993-04-22,1,"['27.020','29.130.20','29.160.40']",ISO/TC 70,9599,,[39046],"['en','fr']",12,"<p>Specifies general requirements for the equipment, requirements for the generating set switchgear, modes of control, and generating set monitoring. Applies to a.c. generating sets for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. For some specific a

39046,IS,,ISO 8528-4:2005,Reciprocating internal combustion engine driven alternating current generating sets — Part 4: Controlgear and switchgear,Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 4: Appareillage de commande et de coupure,2005-06-07,2,"['27.020','29.160.40']",ISO/TC 70,9599,[15760],[88178],"['en','fr']",18,"<p>ISO 8528-4:2005 specifies the criteria for controlgear and switchgear for generating sets with reciprocating internal combustion engines. </p><p>It applies to Alternating Current (a.c.) generating sets driven by Reciprocating Internal Combustion (RIC) engines for land and marine use excluding generating sets used

15761,IS,,ISO 8528-5:1993,Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets,Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 5: Groupes électrogènes,1993-04-22,1,"['27.020','29.160.40']",ISO/TC 70,9599,,[39047],"['en','fr']",28,"<p>Defines terms and specifies design criteria arising out of the combination of an RIC engine and an a.c. generator when operating as a unit. Applies to a.c. generating sets for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. For some specific applications (e.g. essential hospital supplies, h

39047,IS,,ISO 8528-5:2005,Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets,Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 5: Groupes électrogènes,2005-08-05,2,"['27.020','29.160.40']",ISO/TC 70,9599,[15761],[56795],"['en','fr']",34,"<p>ISO 8528-5:2005 defines terms and specifies design and performance criteria arising out of the combination of a Reciprocating Internal Combustion (RIC) engine and an Alternating Current (a.c.) generator when operating as a unit.</p><p>It applies to a.c. generating sets driven by RIC engines for land and marine use, excluding generating sets u

56795,IS,,ISO 8528-5:2013,Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets,Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 5: Groupes électrogènes,2013-03-18,3,"['27.020','29.160.40']",ISO/TC 70,9599,[39047],[71009],"['en','fr']",36,"<p>ISO 8528-5:2013 defines terms and specifies design and performance criteria arising out of the combination of a Reciprocating Internal Combustion (RIC) engine and an Alternating Current (a.c.) generator when operating as a unit.</p><p>It applies to a.c. generating sets driven by RIC engines for land and marine use, excluding generating sets u

71009,IS,,ISO 8528-5:2018,Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets,Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 5: Groupes électrogènes,2018-10-19,4,"['27.020','29.160.40']",ISO/TC 70,9599,[56795],[81844],"['en','fr']",42,"<p>This document specifies design and performance criteria arising out of the combination of a reciprocating internal combustion (RIC) engine and an alternating current (a.c.) generator when operating as a unit. This unit can run paralleling or not to the grid.</p><p>It applies to a.c. generating sets driven by RIC engines for land and marine us

81844,IS,,ISO 8528-5:2022,Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets,Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 5: Groupes électrogènes,2022-06-29,5,"['27.020','29.160.40']",ISO/TC 70,9599,[71009],[85960],"['en','fr']",37,"<p>This document specifies design and performance criteria arising out of the combination of a reciprocating internal combustion (RIC) engine and an alternating current (AC) generator when operating as a unit. This unit can run in parallel to the grid or not.</p><p>This document applies to AC generating sets driven by RIC engines for land and ma

15762,IS,,ISO 8528-6:1993,Reciprocating internal combustion engine driven alternating current generating sets — Part 6: Test methods,Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 6: Méthodes d'essai,1993-04-22,1,"['27.020','29.160.40']",ISO/TC 70,9599,,[39048],"['en','fr']",7,"<p>Specifies the test methods for the characteristics of the complete generating set. The test methods existing for the engines (ISO 3046-2 and ISO 3046-3) and generators (IEC 34-2) may be used for their components. Applies to a.c. generating sets for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. Fo

39048,IS,,ISO 8528-6:2005,Reciprocating internal combustion engine driven alternating current generating sets — Part 6: Test methods,Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 6: Méthodes d'essai,2005-06-07,2,"['27.020','29.160.40']",ISO/TC 70,9599,[15762],[71010],"['en','fr']",13,"<p>ISO 8528-6:2005 specifies the test methods to be used for characterizing an entire generating set. It applies to alternating current (a.c.) generating sets driven by reciprocating internal combustion (RIC) engines for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. </p><p>For some specific

15763,IS,,ISO 8528-7:1994,Reciprocating internal combustion engine driven alternating current generating sets — Part 7: Technical declarations for specification and design,Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 7: Déclarations techniques pour la spécification et la conception,1994-08-25,1,"['27.020','29.160.40']",ISO/TC 70,9599,,[63994],"['en','fr']",14,"<p>Establishes the requirements and parameters for the specification and design of a reciprocating internal combustion (RIC) engine driven generating set, with reference to the definitions given in ISO 8528-1 to ISO 8528-6. Applies to a.c. current generating sets driven by RI

15764,IS,,ISO 8528-8:1995,Reciprocating internal combustion engine driven alternating current generating sets — Part 8: Requirements and tests for low-power generating sets,Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 8: Prescriptions et essais pour groupes électrogènes de faible puissance,1995-11-30,1,"['27.020','29.160.40']",ISO/TC 70,9599,,[63631],"['en','fr']",13,"<p>Defines requirements and type tests for low-power generating sets (up to approximately 10 kW) driven by reciprocating internal combustion engines, excluding generating sets used on aircraft.</p>"

15765,IS,,ISO 8528-9:1995,Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations,Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne — Partie 9: Mesurage et évaluation des vibrations mécaniques,1995-11-30,1,"['27.020','29.160.40','17.160']",ISO/TC 70,9599,,[63995],"['en','fr']",14,"<p>Describes a procedure for measuring and evaluating the external mechanical vibration behaviour of alternating current generating sets driven by reciprocating internal combustion engines. Applicable to fixed and mobile generating sets for land and marine use, excluding generatin

25666,IS,,ISO 8529-1:2001,Reference neutron radiations — Part 1: Characteristics and methods of production,Rayonnements neutroniques de référence — Partie 1: Caractéristiques et méthodes de production,2001-02-01,1,['17.240'],ISO/TC 85/SC 2,9599,[15768],[80060],"['en','fr']",24,"<p>This part of ISO 8529 specifies the reference neutron radiations, in the energy range from thermal up to 20 MeV,</p><p>for calibrating neutron-measuring devices used for radiation protection purposes and for determining their response</p><p>as a function of neutron energy. Reference radiations are given for neutron fluence rates of up to 1 _ 109 m?2_s?1,</p><p>corresponding, at a neutron energy of 1 MeV, to dose-eq

15768,IS,,ISO 8529:1989,Neutron reference radiations for calibrating neutron-measuring devices used for radiation protection purposes and for determining their response as a function of neutron energy,Rayonnements neutroniques de référence destinés à l'étalonnage des instruments de mesure des neutrons utilisés en radioprotection et à la détermination de leur réponse en fonction de l'énergie des neutrons,1989-09-28,1,['17.240'],ISO/TC 85/SC 2,9599,,"[25666,25667,25668]","['en','fr']",20,

25668,IS,,ISO 8529-3:1998,Reference neutron radiations — Part 3: Calibration of area and personal dosimeters and determination of response as a function of energy and angle of incidence,Rayonnements neutroniques de référence — Partie 3: Étalonnage des dosimètres de zone (ou d'ambiance) et individuels et détermination de leur réponse en fonction de l'énergie et de l'angle d'incidence des neutrons,1998-12-03,1,['17.240'],ISO/TC 85/SC 2,9599,[15768],"[41229,82291]","['en','fr']",17,

15772,IS,,ISO 8532:1986,Securities — Format for transmission of certificate numbers,Valeurs mobilières — Format pour la transmission des numéros de titres et de certificats,1986-02-13,1,['03.060'],ISO/TC 68,9599,,[23243],"['en','fr']",4,

33016,IS,,ISO 8533:2003,Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Test methods to prove the design of cemented or wrapped joints,Systèmes de canalisation en matières plastiques pour les branchements et les collecteurs d'assainissement avec ou sans pression — Systèmes en plastiques thermodurcissables renforcés de verre (PRV) à base de résine de polyester non saturé (UP) — Méthodes d'essai pour confirmer la conception des assemblages scellés ou enrobés,2003-11-21,1,"['23.040.45','23.040.20']",ISO/TC 138/SC 6,9599,,[67962],['en'],9,"<p>ISO 8533:2003 specifies met

56679,IS,Amd,ISO 8533:2003/Amd 1:2012,Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Test methods to prove the design of cemented or wrapped joints — Amendment 1,Systèmes de canalisation en matières plastiques pour les branchements et les collecteurs d'assainissement avec ou sans pression — Systèmes en plastiques thermodurcissables renforcés de verre (PRV) à base de résine de polyester non saturé (UP) — Méthodes d'essai pour confirmer la conception des assemblages scellés ou enrobés — Amendement 1,2012-03-02,1,"['23.040.45','23.040.20']",ISO/TC 138/SC 6,9599,,[6796

15774,IS,,ISO 8534:1996,Animal and vegetable fats and oils — Determination of water content — Karl Fischer method,Corps gras d'origines animale et végétale — Détermination de la teneur en eau — Méthode de Karl Fischer,1996-06-20,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[40873],"['en','fr']",7,

40873,IS,,ISO 8534:2008,Animal and vegetable fats and oils — Determination of water content — Karl Fischer method (pyridine free),Corps gras d'origines animale et végétale — Détermination de la teneur en eau — Méthode de Karl Fischer (sans pyridine),2008-06-16,2,['67.200.10'],ISO/TC 34/SC 11,9599,[15774],[71265],"['en','fr','ru']",10,<p>ISO 8534:2008 specifies a method for the determination of the water content of animal and vegetable fats and oils using Karl Fischer apparatus and a reagent which is free of pyridine.</p>

15775,IS,,ISO 8535-1:1989,Compression-ignition engines — Steel tubes for high-pressure fuel injection pipes — Part 1: Requirements for seamless cold-drawn single-wall steel tubes,Moteurs à allumage par compression — Tubes en acier pour lignes d'injection à haute pression — Partie 1: Caractéristiques des tubes en acier monoparoi sans soudure étirés à froid,1989-06-15,1,['43.060.40'],ISO/TC 22,9599,,[15776],"['en','fr']",,

15776,IS,,ISO 8535-1:1990,Compression-ignition engines — Steel tubes for high-pressure fuel injection pipes — Part 1: Requirements for seamless cold-drawn single-wall tubes,Moteurs à allumage par compression — Tubes en acier pour lignes d'injection à haute pression — Partie 1: Caractéristiques des tubes monoparoi sans soudure étirés à froid,1990-09-13,2,['43.060.40'],ISO/TC 22,9599,[15775],[25132],"['en','fr']",7,

20832,IS,Amd,ISO 8535-1:1990/Amd 1:1993,Compression-ignition engines — Steel tubes for high-pressure fuel injection pipes — Part 1: Requirements for seamless cold-drawn single-wall tubes — Amendment 1,Moteurs à allumage par compression — Tubes en acier pour lignes d'injection à haute pression — Partie 1: Caractéristiques des tubes monoparoi sans soudure étirés à froid — Amendement 1,1993-03-04,2,['43.060.40'],ISO/TC 22,9599,,[25132],"['en','fr']",2,

25132,IS,,ISO 8535-1:1996,Compression-ignition engines — Steel tubes for high-pressure fuel injection pipes — Part 1: Requirements for seamless cold-drawn single-wall tubes,Moteurs à allumage par compression — Tubes en acier pour lignes d'injection de combustible haute pression Partie 1: Caractéristiques des tubes monoparoi sans soudure étirés à froid,1996-12-26,3,['43.060.40'],ISO/TC 22,9599,"[15776,20832]",[36624],"['en','fr']",9,<p>Specifies dimensions and requirements for seamless cold-drawn single-wall steel tubes for high-pressure fuel injection pipes on diesel engines (Class 2) and for fuel injection pump testing (Class 1). Replaces the second edition.</p>

36624,IS,,ISO 8535-1:2006,Diesel engines — Steel tubes for high-pressure fuel injection pipes — Part 1: Requirements for seamless cold-drawn single-wall tubes,Moteurs diesels — Tubes en acier pour lignes d'injection de combustible à haute pression — Partie 1: Exigences pour les tubes monoparoi sans soudure étirés à froid,2006-08-22,4,['43.060.40'],ISO/TC 22,9599,[25132],[55884],['en'],10,<p>ISO 8535-1:2006 specifies dimensions and requirements for seamless cold-drawn single-wall steel tubes for high-pressure fuel injection pipes used on diesel (compression-ignition) engines (class 2) and for fuel injection pump testing (class 1).</p><p>It applies to diesel (compression-ignition) engines. </p

55884,IS,,ISO 8535-1:2011,Diesel engines — Steel tubes for high-pressure fuel injection pipes — Part 1: Requirements for seamless cold-drawn single-wall tubes,Moteurs diesels — Tubes en acier pour lignes d'injection de combustible à haute pression — Partie 1: Exigences pour les tubes monoparoi sans soudure étirés à froid,2011-11-28,5,['43.060.40'],ISO/TC 22/SC 34,9599,[36624],[70228],['en'],10,<p>ISO 8535-1:2011 specifies dimensions and requirements for seamless cold-drawn single-wall steel tubes for high-pressure fuel injection pipes used on diesel (compression-ignition) engines (class 2) and for fuel injection pump testing (class 1).</p><p>It applies to diesel (compression-ignition) engine

15777,IS,,ISO 8535-2:1993,Compression-ignition engines — Steel tubes for high-pressure fuel injection pipes — Part 2: Requirements for composite tubes,Moteurs à allumage par compression — Tubes en acier pour lignes d'injection à haute pression — Partie 2: Caractéristiques des tubes composites,1993-11-25,1,['43.060.40'],ISO/TC 22,9599,,[33774],"['en','fr']",6,<p>Applies to diesel engines and specifies dimensions (diameter and length including tolerances) and requirements (with regard to material processing) for fuel injection pipes used on diesel engines and for fuel injection pump testing.</p>

15779,IS,,ISO 8536-1:1991,Infusion equipment for medical use — Part 1: Infusion glass bottles,Matériel de perfusion à usage médical — Partie 1: Flacons en verre pour perfusion,1991-08-22,1,['11.040.20'],ISO/TC 76,9599,,[28348],"['en','fr']",4,

28348,IS,,ISO 8536-1:2000,Infusion equipment for medical use — Part 1: Infusion glass bottles,Matériel de perfusion à usage médical — Partie 1: Flacons en verre pour perfusion,2000-06-22,2,['11.040.20'],ISO/TC 76,9599,[15779],[43434],"['en','fr']",5,

38153,IS,Amd,ISO 8536-1:2000/Amd 1:2004,Infusion equipment for medical use — Part 1: Infusion glass bottles — Amendment 1,Matériel de perfusion à usage médical — Partie 1: Flacons en verre pour perfusion — Amendement 1,2004-09-21,2,['11.040.20'],ISO/TC 76,9599,,[43434],"['en','fr']",2,

43434,IS,,ISO 8536-1:2006,Infusion equipment for medical use — Part 1: Infusion glass bottles,Matériel de perfusion à usage médical — Partie 1: Flacons en verre pour perfusion,2006-03-23,3,['11.040.20'],ISO/TC 76,9599,"[28348,38153]",[56076],"['en','fr','ru']",6,"<p>ISO 8536-1:2006 specifies the dimensions, performance and requirements of infusion glass bottles necessary to ensure functional interchangeability. It is applicable only to infusion bottles for single use.</p>"

33439,IS,,ISO 8536-10:2004,Infusion equipment for medical use — Part 10: Accessories for fluid lines for use with pressure infusion equipment,Matériel de perfusion à usage médical — Partie 10: Accessoires de tubulures pour utilisation avec des appareils de perfusion sous pression,2004-10-12,1,['11.040.20'],ISO/TC 76,9599,,[63621],"['en','fr']",10,"<p>ISO 8536-10:2004 applies to sterilized accessories for single use in fluid lines and pressure infusion equipment as specified in ISO 8536-8.</p><p>ISO 8536-10:2004 includes:</p><ol><li>Two-way stopcocks (2SC), three-way stopcocks (3SC), four-way stopcocks (4SC) and stopcocks manifold (SM). Designation of a stopcock depends on the number of conne

33440,IS,,ISO 8536-11:2004,Infusion equipment for medical use — Part 11: Infusion filters for use with pressure infusion equipment,Matériel de perfusion à usage médical — Partie 11: Filtres de perfusion pour utilisation avec des appareils de perfusion sous pression,2004-10-12,1,['11.040.20'],ISO/TC 76,9599,,[63622],"['en','fr']",8,<p>ISO 8536-11:2004 applies to sterilized infusion filters for single use up to 200 kPa (2 bar) on fluid lines of pressure infusion equipment and infusion set as specified in ISO 8536-8. It does not include the effectiveness of filters for separation of particles or germs.</p>

40236,IS,,ISO 8536-12:2007,Infusion equipment for medical use — Part 12: Check valves,Matériel de perfusion à usage médical — Partie 12: Clapet antiretour,2007-03-30,1,['11.040.20'],ISO/TC 76,9599,,"[70731,79681]",['en'],7,<p>ISO 8536-12:2007 applies to sterilized check valves intended for single use and used with infusion equipment for gravity-feed infusion and/or with pressure infusion apparatus.</p>

60470,IS,Amd,ISO 8536-12:2007/Amd 1:2012,Infusion equipment for medical use — Part 12: Check valves — Amendment 1,Matériel de perfusion à usage médical — Partie 12: Clapet antiretour — Amendement 1,2012-10-01,1,['11.040.20'],ISO/TC 76,9599,,"[70731,79681]",['en'],2,

63427,IS,,ISO 8536-13:2016,Infusion equipment for medical use — Part 13: Graduated flow regulators for single use with fluid contact,Matériel de perfusion à usage médical — Partie 13: Régulateurs de débit gradués non réutilisables avec contact à fluide,2016-09-27,1,['11.040.20'],ISO/TC 76,9599,,[85016],"['en','fr']",6,"<p>ISO 8536-13:2016 specifies requirements for non-sterile, single-use graduated flow regulators used as subcomponents in sterilized infusion sets for single use to control the flow of intravenous infusion solutions with fluid contact under gravity feed conditions.</p><p>In some countries, the national pharmacopoeia or other national regulations are legally binding and take pr

15780,IS,,ISO 8536-2:1992,Infusion equipment for medical use — Part 2: Closures for infusion bottles,Matériel de perfusion à usage médical — Partie 2: Bouchons pour flacons de perfusion,1992-09-17,1,['11.040.20'],ISO/TC 76,9599,,[33078],"['en','fr']",9,

33078,IS,,ISO 8536-2:2001,Infusion equipment for medical use — Part 2: Closures for infusion bottles,Matériel de perfusion à usage médical — Partie 2: Bouchons pour flacons de perfusion,2001-06-14,2,['11.040.20'],ISO/TC 76,9599,[15780],[51770],"['en','fr']",10,

37969,IS,Cor,ISO 8536-2:2001/Cor 1:2003,Infusion equipment for medical use — Part 2: Closures for infusion bottles — Technical Corrigendum 1,Matériel de perfusion à usage médical — Partie 2: Bouchons pour flacons de perfusion — Rectificatif technique 1,2003-02-03,2,['11.040.20'],ISO/TC 76,9599,,[51770],"['en','fr']",2,

51770,IS,,ISO 8536-2:2010,Infusion equipment for medical use — Part 2: Closures for infusion bottles,Matériel de perfusion à usage médical — Partie 2: Bouchons pour flacons de perfusion,2010-03-01,3,['11.040.20'],ISO/TC 76,9599,"[33078,37969]",[82223],"['en','fr']",11,"<p>ISO 8536‑2:2010 specifies the shape, dimensions, material, performance requirements and labelling of closures for infusion bottles as specified in ISO 8536-1.</p><p>The dimensional requirements are not applicable to barrier-coated closures.</p><p>Closures specified in ISO 8536‑2:2010 are intended for single use only.</p>"

15781,IS,,ISO 8536-3:1992,Infusion equipment for medical use — Part 3: Aluminium caps for infusion bottles,Matériel de perfusion à usage médical — Partie 3: Capsules en aluminium pour flacons de perfusion,1992-06-18,1,['11.040.20'],ISO/TC 76,9599,,[30260],"['en','fr']",5,

30260,IS,,ISO 8536-3:1999,Infusion equipment for medical use — Part 3: Aluminium caps for infusion bottles,Matériel de perfusion à usage médical — Partie 3: Capsules en aluminium pour flacons de perfusion,1999-09-23,2,['11.040.20'],ISO/TC 76,9599,[15781],[52177],"['en','fr']",5,

15782,IS,,ISO 8536-4:1987,Infusion equipment for medical use — Part 4: Infusion sets for single use,Matériel de perfusion à usage médical — Partie 4: Appareils de perfusion non réutilisables,1987-11-05,1,['11.040.20'],ISO/TC 76,9599,[5669],[21438],['en'],10,

21438,IS,,ISO 8536-4:1998,"Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed","Matériel de perfusion à usage médical — Partie 4: Appareils de perfusion non réutilisables, à alimentation par gravité",1998-02-19,2,['11.040.20'],ISO/TC 76,9599,[15782],[37613],"['en','fr']",20,

37613,IS,,ISO 8536-4:2004,"Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed","Matériel de perfusion à usage médical — Partie 4: Appareils de perfusion non réutilisables, à alimentation par gravité",2004-08-12,3,['11.040.20'],ISO/TC 76,9599,[21438],[44522],['en'],17,"<p>ISO 8536-4:2004 specifies requirements for single-use, gravity feed infusion sets for medical use in order to ensure their compatibility with containers for infusion solutions and intravenous equipment.</p><p>Secondary aims of this part of ISO 8536 are to provide guidance on specifications relating to the quality and performance of materials used in infusion sets and to present designatio

44522,IS,,ISO 8536-4:2007,"Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed","Matériel de perfusion à usage médical — Partie 4: Appareils de perfusion non réutilisables, à alimentation par gravité",2007-03-16,4,['11.040.20'],ISO/TC 76,9599,[37613],[55799],"['en','fr']",17,"<p>ISO 8536-4:2007 specifies requirements for single-use, gravity feed infusion sets for medical use in order to ensure their compatibility with containers for infusion solutions and intravenous equipment.</p><p>Secondary aims of ISO 8536-4:2007 are to provide guidance on specifications relating to the quality and performance of materials used in infusion sets and to present designati

55799,IS,,ISO 8536-4:2010,"Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed","Matériel de perfusion à usage médical — Partie 4: Appareils de perfusion non réutilisables, à alimentation par gravité",2010-09-17,5,['11.040.20'],ISO/TC 76,9599,[44522],[70730],"['en','fr']",17,"<p>ISO 8536‑4:2010 specifies requirements for single use, gravity feed infusion sets for medical use in order to ensure their compatibility with containers for infusion solutions and intravenous equipment.</p><p>Secondary aims of ISO 8536‑4:2010 are to provide guidance on specifications relating to the quality and performance of materials used in infusion sets and to present designati

60471,IS,Amd,ISO 8536-4:2010/Amd 1:2013,"Infusion equipment for medical use — Part 4: Infusion sets for single use, gravity feed — Amendment 1","Matériel de perfusion à usage médical — Partie 4: Appareils de perfusion non réutilisables, à alimentation par gravité — Amendement 1",2013-02-26,5,['11.040.20'],ISO/TC 76,9599,,[70730],"['en','fr']",3,

15783,IS,,ISO 8536-5:1992,Infusion equipment for medical use — Part 5: Burette type infusion sets,Matériel de perfusion à usage médical — Partie 5: Appareils de perfusion type burette,1992-01-23,1,['11.040.20'],ISO/TC 76,9599,,[20921],"['en','fr']",5,"<p>Specifies requirements for sterilized burette sets of 50 ml, 100 ml and 150 ml nominal capacity intended for single use.</p>"

15784,IS,,ISO 8536-6:1995,Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles,Matériel de perfusion à usage médical — Partie 6: Bouchons à lyophilisation pour flacons de perfusion,1995-04-06,1,['11.040.20'],ISO/TC 76,9599,,[51771],"['en','fr']",14,"<p>Specifies the design, dimensions, material, performance, requirements and test for the type of closure for infusion bottles, which is used in connection with the freeze drying (or lyophilization) of drugs and biological materials.</p>"

51771,IS,,ISO 8536-6:2009,Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles,Matériel de perfusion à usage médical — Partie 6: Bouchons à lyophilisation pour flacons de perfusion,2009-11-09,2,['11.040.20'],ISO/TC 76,9599,[15784],[69394],['en'],15,"<p>ISO 8536-6:2009 specifies the shape, dimensions, material, performance requirements and labelling for the type of closure for infusion bottles, as described in ISO 8536-1, which are used in connection with the freeze-drying (or lyophilization) of drugs and biological materials.</p><p>The dimensional requirements are not applicable to barrier-coated closures.</p><p>Closures specified in ISO 8536-6:2009 are in

69394,IS,,ISO 8536-6:2016,Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles,Matériel de perfusion à usage médical — Partie 6: Bouchons à lyophilisation pour flacons de perfusion,2016-11-21,3,['11.040.20'],ISO/TC 76,9599,[51771],[85867],['en'],16,"<p>ISO 8536-6:2016 specifies the shape, dimensions, material, performance requirements and labelling for the type of closure for infusion bottles, as described in ISO 8536-1, that is used in connection with the freeze-drying (or lyophilization) of drugs and biological materials.</p><p>The dimensional requirements are not applicable to barrier-coated closures.</p><p>Closures specified in this document are intend

15785,IS,,ISO 8536-7:1992,Infusion equipment for medical use — Part 7: Caps made of aluminium-plastics combinations for infusion bottles,Matériel de perfusion à usage médical — Partie 7: Capsules en combinaison aluminium-plastique pour flacons de perfusion,1992-09-24,1,['11.040.20'],ISO/TC 76,9599,,[30261],"['en','fr']",3,

30261,IS,,ISO 8536-7:1999,Infusion equipment for medical use — Part 7: Caps made of aluminium-plastics combinations for infusion bottles,Matériel de perfusion à usage médical — Partie 7: Capsules en combinaison aluminium-plastique pour flacons de perfusion,1999-09-23,2,['11.040.20'],ISO/TC 76,9599,[15785],[52178],"['en','fr']",3,

33437,IS,,ISO 8536-8:2004,Infusion equipment for medical use — Part 8: Infusion equipment for use with pressure infusion apparatus,Matériel de perfusion à usage médical — Partie 8: Matériel de perfusion pour utilisation avec des appareils de perfusion sous pression,2004-08-12,1,['11.040.20'],ISO/TC 76,9599,,[63619],['en'],11,<p>ISO 8536-8:2004 applies to sterilized infusion sets for single use for use with pressure infusion equipment up to a maximum of 200 kPa (2 bar).</p>

33438,IS,,ISO 8536-9:2004,Infusion equipment for medical use — Part 9: Fluid lines for use with pressure infusion equipment,Matériel de perfusion à usage médical — Partie 9: Tubulures pour utilisation avec des appareils de perfusion sous pression,2004-10-14,1,['11.040.20'],ISO/TC 76,9599,,[63620],"['en','fr']",8,<p>ISO 8536:2004 applies to sterilized fluid lines for single use for use with pressure infusion equipment up to a maximum of 200 kPa (2 bar).</p><p>The following items are covered by ISO 8536:2004:</p><ul><li>syringe pump lines (SPL);</li><li>connecting lines (CL); and</li><li>lines with integrated injection cannula (LIC).</li></ul>

15786,IS,,ISO 8537:1991,"Sterile single-use syringes, with or without needle, for insulin",Seringues à insuline stériles non réutilisables avec ou sans aiguille,1991-05-16,1,['11.040.25'],ISO/TC 84,9599,,[40665],"['en','fr']",19,"<p>Specifies requirements and test methods for syringes. Applies to syringes for use with 40 units of insulin/ml (U-40) and 100 units of insulin/ml (U-100). Annexes A, B, C, D, E, F and G forms an integral part of this standard. Annexes H and J are for information only.</p>"

30160,IS,Amd,ISO 8537:1991/Amd 1:2000,"Sterile single-use syringes, with or without needle, for insulin — Amendment 1",Seringues à insuline stériles non réutilisables avec ou sans aiguille — Amendement 1,2000-11-02,1,['11.040.25'],ISO/TC 84,9599,,[40665],"['en','fr']",3,

40665,IS,,ISO 8537:2007,"Sterile single-use syringes, with or without needle, for insulin","Seringues à insuline, stériles, non réutilisables, avec ou sans aiguille",2007-10-01,2,['11.040.25'],ISO/TC 84,9599,"[30160,15786]",[60510],"['en','fr','ru']",23,"<p>ISO 8537:2007 specifies requirements and test methods for sterile syringes, with or without needles, solely for the injection of insulin. The syringes are single-use only, primarily for use in humans. It covers syringes for use with 40 units of insulin/ml (U-40) and 100 units of insulin/ml (U-100).</p><p>Sterile syringes specified in ISO 8537:2007 are intended for use soon after filling as they are not suitable for containing insulin over

15787,IS,,ISO 8538:1986,"Aerospace — Self-locking hexagon nuts with counterbore and captive washer, classification 1 100 MPa/235 degrees C","Aéronautique et espace — Écrous hexagonaux à freinage interne, avec chambrage et rondelle captive, classification 1 100 MPa/235 degrés C",1986-03-13,1,['49.030.30'],ISO/TC 20/SC 4,9599,,[27431],"['en','fr']",3,

15788,IS,,ISO 8539:1986,Forged steel lifting components for use with grade T(8) chain,Accessoires de levage en acier forgé pour utilisation avec des chaînes de classe T(8),1986-12-11,1,['53.020.30'],ISO/TC 111/SC 3,9599,,[52349],"['en','fr']",6,<p>Specifies requirements for forged lifting componentes for use in chain sling assemblies in a range of sizes having performance compatibility with the corresponding nominal sizes of grade T(8) chain. Performance compatibility encompasses component strength and the necessary physical dimensions.</p>

15793,IS,,ISO 8543:1986,Textile floor coverings — Methods for determination of mass,Revêtements de sol textiles — Méthodes de détermination de la masse,1986-11-13,1,['97.150'],ISO/TC 219,9599,"[6688,6883,6395,6689]",[28342],"['en','fr']",5,

28342,IS,,ISO 8543:1998,Textile floor coverings — Methods for determination of mass,Revêtements de sol textiles — Méthodes de détermination de la masse,1998-04-23,2,['97.150'],ISO/TC 219,9599,[15793],[74529],"['en','fr']",9,

15798,IS,,ISO 8548-2:1993,Prosthetics and orthotics — Limb deficiencies — Part 2: Method of describing lower limb amputation stumps,Prothèses et orthèses — Malformations des membres — Partie 2: Méthode de description des moignons d'amputation des membres inférieurs,1993-06-24,1,['11.040.40'],ISO/TC 168,9599,,"[66384,76809]","['en','fr']",16,<p>Establishes a method of describing lower limb amputation stumps and proposes a standardized system for recording the descriptive information which can be easily incorporated in reports and forms and should also be capable of ready adaptation for computer analysis. Deliberately aims at defining the minimum information to be described.</p>

15799,IS,,ISO 8548-3:1993,Prosthetics and orthotics — Limb deficiencies — Part 3: Method of describing upper limb amputation stumps,Prothèses et orthèses — Malformations des membres — Partie 3: Méthode de description des moignons d'amputation des membres supérieurs,1993-06-24,1,['11.040.40'],ISO/TC 168,9599,,"[84954,66386]","['en','fr']",15,<p>Establishes a method of describing upper limb amputation stumps and proposes a standardized system for recording the descriptive information which can be easily incorporated in reports and forms and should also be capable of ready adaptation for computer analysis. Deliberately aims at defining the minimum information to be described.</p>

15800,IS,,ISO 8549-1:1989,Prosthetics and orthotics — Vocabulary — Part 1: General terms for external limb prostheses and external orthoses,Prothèses et orthèses — Vocabulaire — Partie 1: Termes généraux pour prothèses de membre et orthèses externes,1989-06-22,1,"['11.040.40','01.040.11']",ISO/TC 168,9599,,[79495],"['en','fr']",6,"<p>Includes more than 40 definitions of terms used to describe artificial limbs, the anatomy of those parts of the human body and the personal and procedures involved in the practice of prosthetics and orthotics. It does not apply to breast or other external prostheses, dental prostheses or internal ones.</p>"

15801,IS,,ISO 8549-2:1989,Prosthetics and orthotics — Vocabulary — Part 2: Terms relating to external limb prostheses and wearers of these prostheses,Prothèses et orthèses — Vocabulaire — Partie 2: Termes relatifs aux prothèses de membre et aux porteurs de ces prothèses,1989-06-22,1,"['11.040.40','01.040.11']",ISO/TC 168,9599,,[79496],"['en','fr']",2,<p>Includes 19 definitions of terms used to describe the level of amputation of limbs and limb deficiencies present at birth and their correction. It complements part 1 of this ISO 5849 series.</p>

79496,IS,,ISO 8549-2:2020,Prosthetics and orthotics — Vocabulary — Part 2: Terms relating to external limb prostheses and wearers of these prostheses,Prothèses et orthèses — Vocabulaire — Partie 2: Termes relatifs aux prothèses de membre et aux porteurs de ces prothèses,2020-09-15,2,"['11.040.40','01.040.11']",ISO/TC 168,9599,[15801],[82792],['en'],5,"<p>This document defines terms used to describe external limb prostheses and the wearers of external limb prostheses.</p><p>NOTE 1 The types of component used in the construction of prostheses are classified and described in the ISO 13405 series.</p><p>NOTE 2 For the purposes of this document, the abbreviated term ?prosthetics' and its deriva

15802,IS,,ISO 8549-3:1989,Prosthetics and orthotics — Vocabulary — Part 3: Terms relating to external orthoses,Prothèses et orthèses — Vocabulaire — Partie 3: Termes relatifs aux orthèses externes,1989-06-22,1,"['11.040.40','01.040.11']",ISO/TC 168,9599,,[79497],"['en','fr']",5,<p>Definitions of 22 terms relating to external orthoses that encompass joints. It does not include terms for orthoses which only encompass limb segments as these orthoses are limited mainly to use in the treatment of fractures and in sports medicine. It complements parts 1 and 2 of the ISO 5849 series.</p>

63536,IS,,ISO 8549-4:2014,Prosthetics and orthotics — Vocabulary — Part 4: Terms relating to limb amputation,Prothèses et orthèses — Vocabulaire — Partie 4: Termes relatifs à l'amputation de membres,2014-10-30,1,"['11.040.40','01.040.11']",ISO/TC 168,9599,,[81001],"['en','fr']",4,"<p>ISO 8549-4:2014 specifies a vocabulary for the description of surgical limb amputations, amputation procedures, and persons who have had an amputation.</p>"

81001,IS,,ISO 8549-4:2020,Prosthetics and orthotics — Vocabulary — Part 4: Terms relating to limb amputation,Prothèses et orthèses — Vocabulaire — Partie 4: Termes relatifs à l'amputation de membres,2020-09-11,2,"['11.040.40','01.040.11']",ISO/TC 168,9599,[63536],[86873],['en'],5,"<p>This document specifies a vocabulary for the description of surgical limb amputations, amputation procedures, and persons who have had an amputation.</p>"

5231,IS,,ISO 855:1981,"Oil of lemon, Italy, obtained by expression","Huile essentielle de citron, Italie, obtenue par expression",1981-09-01,1,['71.100.60'],ISO/TC 54,9599,,"[5232,32042]","['en','fr']",2,"<p>The oil must be a mobile clear liquid which may become cloudy by lowering the temperature. The colour has to be pale yellow to pale greenish-yellow, the odour characteristic of fresh pericarp of lemon. The following characteristics shall not exceed the range indicated. Relative density at 20/20 °C: 0,849 - 0,858; refractive index at 20 °C: 1,4740 - 1,4760; optical rotation at 20 °C: + 57 to + 65 ; residue on evaporation: 1,6 - 3,9 %; acid value: maximum 3,0; carbonyl value: 11 - 17; CD v

38506,IS,,ISO 8551:2003,"Prosthetics and orthotics — Functional deficiencies — Description of the person to be treated with an orthosis, clinical objectives of treatment, and functional requirements of the orthosis","Prothèses et orthèses — Malformations des membres — Description de la condition de l'utilisateur d'orthèse, objectifs cliniques, et exigences fonctionnelles et biomécaniques de l'orthèse",2003-08-19,1,['11.040.40'],ISO/TC 168,9599,,[76808],['en'],7,"<p>ISO 8551:2003 establishes a method of describing the person to be treated with an orthosis, the clinical objectives of treatment and the functional requirements of the orthosis.</p>"

31881,IS,,ISO 8552:2004,Milk — Estimation of psychrotrophic microorganisms — Colony-count technique at 21 degrees C (Rapid method),Lait — Estimation des micro-organismes psychrotrophes — Technique par comptage des colonies à 21 degrés C (Méthode rapide),2004-04-26,1,['07.100.30'],ISO/TC 34/SC 5,9599,,[67437],"['en','fr']",6,<p>ISO 8552|IDF 132:2004 specifies a rapid method for estimating the number of psychrotrophic microorganisms by means of the colony-count technique at 21 °C.</p><p>The method is applicable to raw and pasteurized milk.</p>

15821,IS,,ISO 8559:1989,Garment construction and anthropometric surveys — Body dimensions,Confection des vêtements et relevés anthropométriques — Mesures du corps humain,1989-06-15,1,['61.020'],ISO/TC 133,9599,,[61686],"['en','fr']",9,"<p>Defines the location and taking of body dimensions and applies to all items of clothing for men, women and children. The use of calipers and anthropometers is excluded.</p>"

64075,IS,,ISO 8559-2:2017,Size designation of clothes — Part 2: Primary and secondary dimension indicators,Désignation des tailles de vêtements — Partie 2: Indicateurs des dimensions principales et secondaires,2017-02-28,1,['61.020'],ISO/TC 133,9599,"[9079,10327,10328,10325,10329,9080,10330,9081,9078,10326,9082]","[79533,85590]","['en','fr']",24,"<p>ISO 8559-2:2017 specifies primary and secondary dimensions for specified types of garments to be used in combination with ISO 8559‑1 (anthropometric definitions for body measurement).</p><p>The primary aim of this document is to establish a size designation system that can be used by manufacturers and retailers to indicate to consumers (in a simp

5233,IS,,ISO 856:1981,"Oil of peppermint, France, Italy, United Kingdom and USA","Huile essentielle de menthe poivrée, France, Italie, Royaume-Uni et USA",1981-07-01,1,['71.100.60'],ISO/TC 54,9599,,"[32041,5234]","['en','fr']",3,"<p>The Standard specifies the following characteristics of the oil: appearance, colour, odour, relative density at 20/20 °C, refractive index at 20 °C, optical rotation at 20 °C, miscibility with 70 % (V/V) ethanol at 20 °C, ester value after acetylation, carbonyl value. Most of the characteristics differ in dependence from the country of origin.</p>"

15822,IS,,ISO 8560:1986,"Technical drawings — Construction drawings — Representation of modular sizes, lines and grids","Dessins techniques — Dessins de construction — Représentation des dimensions, lignes et quadrillages modulaires",1986-05-08,1,['01.100.30'],ISO/TC 10/SC 8,9599,,[72755],"['en','fr']",5,"<p>In the rules laid down the basic module M is 100 mm (see ISO 1006).Planning and design work is made easier by modular sizes. Multimodular grids may be added, to a limited extent, in construction drawings for manufacturing and construction, for orientation and location.</p>"

15823,IS,,ISO 8561:1995,"Household frost-free refrigerating appliances — Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by internal forced air circulation — Characteristics and test methods","Appareils de réfrigération ménagers à air pulsé — Réfrigérateurs, réfrigérateurs-congélateurs, conservateurs de denrées congelées et congélateurs à air pulsé intérieur — Caractéristiques et méthodes d'essai",1995-11-16,1,['97.040.30'],ISO/TC 86,9599,,[27428],"['en','fr']",51,"<p>Specifies the essential characteristics for household frozen food storage cabinets and food freezers cooled by internal forced air circulation and for household refrigerators and refr