Withdrawn and superseded ISO standards — page 174 of 246

22646,IS,Amd,ISO 8561:1995/Amd 1:1997,"Household frost-free refrigerating appliances — Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by internal forced air circulation — Characteristics and test methods — Amendment 1: compartments for the preservation of highly perishable foodstuffs","Appareils de réfrigération ménagers à air pulsé — Réfrigérateurs, réfrigérateurs-congélateurs, conservateurs de denrées congelées et congélateurs à air pulsé intérieur — Caractéristiques et méthodes d'essai — Amendement 1: spéciaux destinés à l'entreposage des denrées hautement périssables",1997-12-18,1,['97.040.30'],ISO/TC 86,9599,,[27428],"['en','fr']",6,

15824,IS,,ISO 8562:1990,Cycles — Stem wedge angle,Cycles — Angle du coin de serrage de potence,1990-10-10,1,['43.150'],ISO/TC 149,9599,,[79182],"['en','fr']",1,

15825,IS,,ISO 8563:1987,Propylene and butadiene for industrial use — Sampling in the liquid phase,Propylène et butadiène à usage industriel — Échantillonnage en phase liquide,1987-06-11,1,['71.080.10'],ISO/TC 47,9599,,[82799],"['en','fr']",6,"<p>Describes the procedure and the precautions to be taken in drawing representative samples of the substances for the purpose of their analyses. It also sets out, in Annex A, a diagrammatic representation of a system for the disposal of the portion of the sample not used in the analysis, and, in Annex B, the sequence of operations for filling a sample cylinder.</p>"

15827,IS,,ISO 8565:1992,Metals and alloys — Atmospheric corrosion testing — General requirements for field tests,Métaux et alliages — Essais de corrosion atmosphérique — Prescriptions générales de l'essai in situ,1992-01-23,1,['77.060'],ISO/TC 156,9599,[10453],"[53492,40858]","['en','fr']",8,"<p>Describes requirements for test specimens, test sites and their characterization, operating conditions, test procedures and the test report.</p>"

15828,IS,,ISO 8566-1:1992,Cranes — Cabins — Part 1: General,Appareils de levage à charge suspendue — Cabines — Partie 1: Généralités,1992-06-18,1,['53.020.20'],ISO/TC 96/SC 9,9599,,[46497],"['en','fr']",4,"<p>Establishes the general requirements for cabin construction, driver's seat, visibility, control elements, information, noise, vibration, heating and air-conditioning for cranes as defined in ISO 4306-1.</p>"

2656,IS,,ISO 8566-2:1995,Cranes — Cabins — Part 2: Mobile cranes,Appareils de levage à charge suspendue — Cabines — Partie 2: Grues mobiles,1995-07-13,1,['53.020.20'],ISO/TC 96/SC 6,9599,,[69220],"['en','fr']",5,<p>Establishes the criteria for cabins for mobile cranes as defined in ISO 4306-2. These criteria are intended to cover cabins only for crane operation and not for road travel.</p>

15829,IS,,ISO 8566-3:1992,Cranes — Cabins — Part 3: Tower cranes,Appareils de levage à charge suspendue — Cabines — Partie 3: Grues à tour,1992-06-18,1,['53.020.20'],ISO/TC 96/SC 7,9599,,[46495],"['en','fr']",4,"<p>Establishes the requirements for cabin construction, control station, control elements and noise for cranes as defined in ISO 4306-3.</p>"

15830,IS,,ISO 8566-5:1992,Cranes — Cabins — Part 5: Overhead travelling and portal bridge cranes,Appareils de levage à charge suspendue — Cabines — Partie 5: Ponts roulants et ponts portiques,1992-06-18,1,['53.020.20'],ISO/TC 96/SC 9,9599,,[68841],"['en','fr']",2,"<p>Establishes the requirements for cabin construction, driver's seat, control elements, heating and cooling for cranes as defined in ISO 4306-1.</p>"

15831,IS,,ISO 8567:1986,Cinematography — Maximum permissible area for subtitle 35 mm and 16 mm motion-picture release prints — Dimensions and locations,"Cinématographie — Surface maximum réservée aux sous-titres, sur les copies d'exploitation de 35 mm et de 16 mm — Dimensions et emplacements",1986-11-13,1,['37.060.20'],ISO/TC 36,9599,,[28294],"['en','fr']",3,

15832,IS,,ISO 8568:1989,Mechanical shock — Testing machines — Characteristics and performance,Chocs mécaniques — Machines d'essai — Caractéristiques et performance,1989-11-02,1,['17.160'],ISO/TC 108,9599,,"[27115,40205]","['en','fr']",9,<p>Provides guidance covering the parameters of shock-testing machines. Is intended to ensure that the potential user is provided with an adequate description of the machine and to give guidance for the selection of such machinery.</p>

15833,IS,,ISO 8569:1989,Mechanical vibration — Shock-and-vibration-sensitive electronic equipment — Methods of measurement and reporting data of shock and vibration effects in buildings,Vibrations mécaniques — Équipements électroniques sensibles aux chocs et aux vibrations — Méthodes de mesurage et de présentation de données relatives aux effets des chocs et des vibrations dans les bâtiments,1989-12-21,1,['17.160'],ISO/TC 108/SC 2,9599,,[20823],"['en','fr']",9,

20823,IS,,ISO 8569:1996,Mechanical vibration and shock — Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings,Vibrations et chocs mécaniques — Mesurage et évaluation des effets des chocs et des vibrations sur les équipements sensibles dans les bâtiments,1996-06-20,2,['17.160'],ISO/TC 108/SC 2,9599,[15833],[26974],"['en','fr']",9,

21099,IS,,ISO 857-1:1998,Welding and allied processes — Vocabulary — Part 1: Metal welding processes,Soudage et techniques connexes — Vocabulaire — Partie 1: Soudage des métaux,1998-12-20,1,"['25.160.10','01.040.25']",ISO/TC 44/SC 7,9599,[5236],"[62522,55759]","['en','fr']",82,

5235,IS,,ISO 857:1979,Definitions of welding processes,Définition des procédés de soudage,1979-11-01,1,"['25.160.10','25.160.50','01.040.25']",ISO/TC 44,9599,,[5236],"['en','fr']",2,

5236,IS,,ISO 857:1990,"Welding, brazing and soldering processes — Vocabulary",Procédés de soudage et de brasage — Vocabulaire,1990-07-12,2,"['25.160.10','25.160.50','01.040.25']",ISO/TC 44/SC 7,9599,[5235],"[21099,29995]","['en','fr']",27,

15857,IS,,ISO 8572:1991,"Pipes and fittings made of glass-reinforced thermosetting plastics (GRP) — Definitions of terms relating to pressure, including relationships between them, and terms for installation and jointing","Tubes et raccords en plastique thermodurcissable renforcé au verre textile (PRV) — Définitions des termes relatifs à la pression, y compris les relations entre eux, l'installation et l'assemblage",1991-07-18,1,"['23.040.01','01.040.23']",ISO/TC 138/SC 6,9599,,[26781],"['en','fr']",4,"<p>Defines nominal pressure (PN), maximum allowable pressure, and maximum service pressure when applied to components. States the range of PN ratings for use with components. Annex A forms an

15858,IS,,ISO 8573-1:1991,Compressed air for general use — Part 1: Contaminants and quality classes,Air comprimé pour usage général — Partie 1: Polluants et classes de qualité,1991-12-12,1,['71.100.20'],ISO/TC 118/SC 4,9599,,[29301],"['en','fr']",8,

29301,IS,,ISO 8573-1:2001,Compressed air — Part 1: Contaminants and purity classes,Air comprimé — Partie 1: Polluants et classes de pureté,2001-02-15,2,['71.100.20'],ISO/TC 118/SC 4,9599,[15858],[46418],"['en','fr']",8,

36698,IS,Cor,ISO 8573-1:2001/Cor 1:2002,Compressed air — Part 1: Contaminants and purity classes — Technical Corrigendum 1,Air comprimé — Partie 1: Polluants et classes de pureté — Rectificatif technique 1,2002-04-25,2,['71.100.20'],ISO/TC 118/SC 4,9599,,[46418],"['en','fr']",2,

15859,IS,,ISO 8573-2:1996,Compressed air for general use — Part 2: Test methods for aerosol oil content,Air comprimé pour usage général — Partie 2: Méthodes d'essai pour mesurer les aérosols d'huile,1996-06-06,1,['71.100.20'],ISO/TC 118/SC 4,9599,,[34916],"['en','fr']",23,"<p>Describes test methods for the sampling and quantitative analysis of aerosol oil content and liquid oil (excluding oil vapour) normally present in the air discharged from compressors and compressed air systems. Gives detailed instructions on the equipment to be used and the test methods to be employed for the measurement of oil content. Applies to compressed air systems up to 30 bar working pressure, but excluding syste

34916,IS,,ISO 8573-2:2007,Compressed air — Part 2: Test methods for oil aerosol content,Air comprimé — Partie 2: Méthodes d'essai pour la détermination de la teneur en aérosols d'huile,2007-01-26,2,['71.100.20'],ISO/TC 118/SC 4,9599,[15859],[66999],"['en','fr']",25,"<p>ISO 8573-2:2007 specifies test methods for the sampling and quantitative analysis of oil aerosols and liquid oil that can typically be present in compressed air. Test methods for oil vapour are excluded from ISO 8573-2:2007 as they are covered by ISO 8573-5.</p><p>Two different methods are described, method A and method B. Method B is subdivided into two parts to clearly distinguish between procedures for obtaining the quantit

21397,IS,,ISO 8573-4:2001,Compressed air — Part 4: Test methods for solid particle content,Air comprimé — Partie 4: Méthodes d'essai pour la détermination de la teneur en particules solides,2001-06-14,1,['71.100.20'],ISO/TC 118/SC 4,9599,,[69695],"['en','fr']",14,

36697,IS,Cor,ISO 8573-4:2001/Cor 1:2002,Compressed air — Part 4: Test methods for solid particle content — Technical Corrigendum 1,Air comprimé — Partie 4: Méthodes d'essai pour la détermination de la teneur en particules solides — Rectificatif technique 1,2002-04-18,1,['71.100.20'],ISO/TC 118/SC 4,9599,,[69695],"['en','fr']",1,

33712,IS,,ISO 8573-5:2001,Compressed air — Part 5: Test methods for oil vapour and organic solvent content,Air comprimé — Partie 5: Méthodes d'essai pour la détermination de la teneur en vapeurs d'huile et en solvants organiques,2001-12-20,1,['71.100.20'],ISO/TC 118/SC 4,9599,,"[86791,73649]","['en','fr']",11,

15860,IS,,ISO 8574:1990,Aerospace — Hydraulic system tubing — Qualification tests,Aéronautique et espace — Tubes hydrauliques — Essais de qualification,1990-11-29,1,['49.080'],ISO/TC 20/SC 10,9599,,[37543],"['en','fr']",6,"<p>Specifies flexure, pressure impulse and burst test procedures for determining and classifying the fatigue strengths for bent tubing. The procedures are intended for high and low pressure system tubing qualification purposes or for the evaluation of new materials. Describes test equipment, test specimens, stress determination, testing and requirements. Includes figures.</p>"

15861,IS,,ISO 8575:1990,Aerospace — Fluid systems — Hydraulic system tubing,Aéronautique et espace — Systèmes de fluides — Tubes pour systèmes hydrauliques,1990-11-01,1,['49.080'],ISO/TC 20/SC 10,9599,,"[54139,26943]","['en','fr']",3,"<p>Gives the requirements relating to the sizes and material of tubing for use in hydraulic pressure and return systems. For pressure lines, the requirements apply to the pressure and temperature ranges covered by pressure classes D and E and temperature types II and III as specified in ISO 6771. Tubing materials are included in table 1, outside diameters, wall thicknesses and materials for hydraulic tubing pressure lines are given in table 2. Corresponding nat

54139,IS,,ISO 8575:2016,Aerospace — Fluid systems — Hydraulic system tubing,Série aérospatiale — Systèmes de fluides — Tubes pour systèmes hydrauliques,2016-11-17,2,['49.080'],ISO/TC 20/SC 10,9599,[15861],[86094],['en'],9,"<p>ISO 8575:2016 provides information relating to the sizes and materials of tubing for use in aerospace hydraulic pressure and return and suction lines. For pressure lines, the requirements apply to the pressure and temperature ranges covered by pressure class D, E and J and temperature type 13 and type 20 as specified in ISO 6771.</p>"

15864,IS,,ISO 8578:1997,Microscopes — Marking of objectives and eyepieces,Optique et instruments d'optique — Microscopes — Marquage des objectifs et des oculaires,1997-04-17,1,['37.020'],ISO/TC 172/SC 5,9599,,[50988],"['en','fr']",7,

37580,IS,Cor,ISO 8578:1997/Cor 1:2002,Microscopes — Marking of objectives and eyepieces — Technical Corrigendum 1,Optique et instruments d'optique — Microscopes — Marquage des objectifs et des oculaires — Rectificatif technique 1,2002-11-14,1,['37.020'],ISO/TC 172/SC 5,9599,,[50988],"['en','fr']",1,

15865,IS,,ISO 8579-1:1993,Acceptance code for gears — Part 1: Determination of airborne sound power levels emitted by gear units,Code de réception des engrenages — Partie 1: Détermination du niveau de puissance acoustique émis dans l'air par les transmissions par engrenages,1993-02-04,1,"['21.200','17.140.20']",ISO/TC 60,9599,,[24327],"['en','fr']",16,"<p>Specifies the conditions under which sound emitted from gear units is determined in order to establish a common procedure for comparison. The methods used are based on ISO 3744 and ISO 3746. Applies to all power transmission gearing other than gears for fine mechanisms. If it is necessary to determine sound power levels in octave or one-thi

15866,IS,,ISO 8579-2:1993,Acceptance code for gears — Part 2: Determination of mechanical vibrations of gear units during acceptance testing,Code de réception des engrenages — Partie 2: Détermination des vibrations mécaniques d'une transmission par engrenages au cours des essais de réception,1993-02-04,1,"['21.200','17.160']",ISO/TC 60,9599,,"[24328,75670]","['en','fr']",14,"<p>Specifies the methods for determining mechanical vibration of individually housed, enclosed, speed-increasing and speed-reducing gear units. Specifies methods for measuring housing and shaft vibrations, and the types of instrumentation, measurement methods and testing procedures for determining vibration levels. Vibra

15867,IS,,ISO 8580:1987,Rubber and plastics hoses — Determination of ultra-violet resistance under static conditions,Tuyaux en caoutchouc et en plastique — Détermination de la résistance aux ultraviolets dans des conditions statiques,1987-12-17,1,['23.040.70'],ISO/TC 45/SC 1,9599,,"[30360,45700]","['en','fr']",4,"<p>Provides a means of assessing the deterious effects of ultra-violet radiation under static conditions. specifies 3 methods: one for bore sizes up to 25 mm, tested on the hose itself; one for bore sizes greater than 25 mm, tested on a piece of the hose wall, and one for bore sizes greater than 25 mm, tested on a piece of the hose coating. The last method should only be used, if it

31628,IS,,ISO 8583-1:2003,"Financial transaction card originated messages — Interchange message specifications — Part 1: Messages, data elements and code values","Messages initiés par cartes de transaction financière — Spécifications d'échange de messages — Partie 1: Messages, éléments de données et valeurs de code",2003-06-17,1,['35.240.15'],ISO/TC 68/SC 9,9599,"[33169,15871]",[79451],['en'],194,"<p>ISO 8583-1:2003 specifies a common interface by which financial transaction card originated messages may be interchanged between acquirers and card issuers.</p><p>It specifies message structure, format and content, data elements and values for data elements. The method by which settlement takes

15870,IS,,ISO 8583:1987,Bank card originated messages — Interchange message specifications — Content for financial transactions,Messages initiés par carte bancaire — Spécifications d'échange de messages — Contenu pour les transactions financières,1987-08-13,1,['35.240.40'],ISO/TC 68,9599,,[15871],"['en','fr']",33,

15871,IS,,ISO 8583:1993,Financial transaction card originated messages — Interchange message specifications,Messages initiés par carte de transaction financière — Spécifications d'échange de messages,1993-12-23,2,['35.240.15'],ISO/TC 68,9599,[15870],"[31628,23632,35363]","['en','fr']",119,"<p>Specifies a common interface by which financial transaction card originated messages may be interchanged between acquirers and card issuers, message structure, format and content, data elements and values for data elements. Also specifies a numbering system for institution identification codes for financial institutions which do not have an ISO 7812 institution identification number and the procedures u

33169,IS,Cor,ISO 8583:1993/Cor 1:1999,Financial transaction card originated messages — Interchange message specifications — Technical Corrigendum 1: .,Messages initiés par carte de transaction financière — Spécifications d'échange de messages — Rectificatif technique 1: .,1999-12-16,2,['35.240.15'],ISO/TC 68,9599,,"[31628,23632,35363]","['en','fr']",1,

23632,IS,,ISO 8583-2:1998,Financial transaction card originated messages — Interchange message specifications — Part 2: Application and registration procedures for Institution Identification Codes (IIC),Messages initiés par cartes de transaction financière — Spécifications d'échange de messages — Partie 2: Procédures d'application et d'enregistrement pour codes d'identification d'institution (IIC),1998-06-18,1,['35.240.15'],ISO/TC 68/SC 9,9599,"[33169,15871]",[79451],"['en','fr']",6,

23633,IS,,ISO 8583-3:1998,Financial transaction card originated messages — Interchange message specifications — Part 3: Maintenance procedures for codes,Messages initiés par cartes de transaction financière — Spécifications d'échange de messages — Partie 3: Procédures de maintenance pour codes,1998-06-18,1,['35.240.15'],ISO/TC 68,9599,,[35363],"['en','fr']",5,

35363,IS,,ISO 8583-3:2003,"Financial transaction card originated messages — Interchange message specifications — Part 3: Maintenance procedures for messages, data elements and code values","Messages initiés par cartes de transaction financière — Spécifications d'échange de messages — Partie 3: Procédures de maintenance pour messages, éléments de données et valeurs de code",2003-05-13,2,['35.240.15'],ISO/TC 68/SC 9,9599,"[33169,15871,23633]",[79451],['en'],11,"<p>ISO 8583-3:2003 establishes the role of the maintenance agency (MA) and specifies the procedures for adding messages and data elements to ISO 8583-1 and to codes listed in Annex A of ISO 8583-1.</p><p>The responsibilities of the MA r

15875,IS,,ISO 8586-1:1993,"Sensory analysis — General guidance for the selection, training and monitoring of assessors — Part 1: Selected assessors","Analyse sensorielle — Guide général pour la sélection, l'entraînement et le contrôle des sujets — Partie 1: Sujets qualifiés",1993-03-11,1,"['03.100.30','67.240']",ISO/TC 34/SC 12,9599,,[45352],"['en','fr']",15,"<p>Supplements the information given in ISO 6658. The entire process includes recruitment, preliminary screening and initiation; training in general principles and methods; selection for particular purposes; monitoring performance; possible training as expert assessors.</p>"

15876,IS,,ISO 8586-2:1994,"Sensory analysis — General guidance for the selection, training and monitoring of assessors — Part 2: Experts","Analyse sensorielle — Guide général pour la sélection, l'entraînement et le contrôle des sujets — Partie 2: Experts",1994-06-23,1,"['03.100.30','67.240']",ISO/TC 34/SC 12,9599,,[37389],"['en','fr']",10,"<p>Describes criteria for choosing people with particular sensory skills from selected assessors or from product, process or marketing specialists who themselves satisfy the selection criteria specified in ISO 8586-1. Gives principles and procedures for expanding their knowledge and abilities to the levels required for experts assessors. Supplements the in

37389,IS,,ISO 8586-2:2008,"Sensory analysis — General guidance for the selection, training and monitoring of assessors — Part 2: Expert sensory assessors","Analyse sensorielle — Lignes directrices générales pour la sélection, l'entraînement et le contrôle des sujets — Partie 2: Sujets experts sensoriels",2008-05-22,2,"['03.100.30','67.240']",ISO/TC 34/SC 12,9599,[15876],[45352],"['en','fr']",8,"<p>ISO 8586-2:2008 specifies criteria for choosing people with particular sensory skills from selected assessors or from product, process or marketing specialists who themselves satisfy the selection criteria specified in ISO 8586-1. It specifies principles and procedures for choosing them and expandi

45352,IS,,ISO 8586:2012,"Sensory analysis — General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors","Analyse sensorielle — Lignes directrices générales pour la sélection, l'entraînement et le contrôle des sujets qualifiés et sujets sensoriels experts",2012-12-14,1,"['03.100.30','67.240']",ISO/TC 34/SC 12,9599,"[15875,37389]",[76667],"['en','fr']",28,<p>ISO 8586:2012 specifies criteria for the selection and procedures for the training and monitoring of selected assessors and expert sensory assessors. It supplements the information given in ISO 6658.</p>

15877,IS,,ISO 8587:1988,Sensory analysis — Methodology — Ranking,Analyse sensorielle — Méthodologie — Essai de classement par rangs,1988-12-15,1,['67.240'],ISO/TC 34/SC 12,9599,,"[25968,36172]","['en','fr']",9,"<p>The method consists in simultaneous presentation of several test samples in random order to assessors. Ranking of the samples according to a specified criterion (for example, total impression, particular attribute or specific charakteristic of an attribute). If a reference sample is used, it is placed unidentified among the other samples. Statistical evaluation of the test results. An annex A gives a parctical example of appllication. A specimen answer form is given in an annex B.<

15878,IS,,ISO 8588:1987,Sensory analysis — Methodology — 'A' - 'not A' test,Analyse sensorielle — Méthodologie — Essai 'A' - 'non A',1987-05-07,1,['67.240'],ISO/TC 34/SC 12,9599,,"[52261,25969,63403]","['en','fr']",6,"<p>The principle of the test consists in presentation to an assessor of a series of samples, some of which are composed of sample 'A' while others are different from sample 'A'; for each sample, the assessor has to determine whether or not it is identical to 'A'. This test requires the assessor to have evaluated a known sample 'A' prior to the exposure to test samples. Examples of application are given in an annex A. An annex C shows examples of answer forms.</p>"

15879,IS,,ISO 8589:1988,Sensory analysis — General guidance for the design of test rooms,Analyse sensorielle — Directives générales pour la conception de locaux destinés à l'analyse,1988-11-17,1,['67.240'],ISO/TC 34/SC 12,9599,,"[36385,25970]","['en','fr']",9,"<p>Description of the design of test rooms used to conduct sensory evaluations under constant, controlled conditions with a minimum of distractions, to reduce the effect that psychological factors and physical conditions can have on human judgement. 11 figures show examples of suitable designs.</p>"

15880,IS,,ISO 8590:1985,Cinematography — Audio records on 35 mm and 70 mm motion-picture release prints with magnetic stripes — Recorded characteristics,Cinématographie — Enregistrements sonores sur copies 35 mm et 70 mm à pistes magnétiques — Caractéristiques d'enregistrement,1985-11-21,1,['37.060.20'],ISO/TC 36,9599,,[15881],"['en','fr']",2,

15897,IS,,ISO 8595:1989,Interpretation of statistical data — Estimation of a median,Interprétation des données statistiques — Estimation d'une médiane,1989-12-14,1,['03.120.30'],ISO/TC 69,9599,,[28678],"['en','fr']",3,"<p>Describes procedures for establishing the point estimate and the confidence intervals of a median of a probability distribution of a population, based on a random sample of size n from the population. These procedures give a method of distribution-free estmation and can be applied also to estimate quartiles and/or percentiles. Valid for any continous population, provided that the sample is drawn at random.</p>"

15898,IS,,ISO 8596:1994,Ophthalmic optics — Visual acuity testing — Standard optotype and its presentation,Optique ophtalmique — Mesure de l'acuité visuelle — Optotype normalisé et sa présentation,1994-02-10,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[52487],"['en','fr']",4,<p>Specifies a range of Landolt ring optotypes and describes a method for measuring distance visual acuity under daylight conditions for the purposes of certification or licensing.</p>

52487,IS,,ISO 8596:2009,Ophthalmic optics — Visual acuity testing — Standard optotype and its presentation,Optique ophtalmique — Essai d'acuité visuelle — Optotype normalisé et sa présentation,2009-06-24,2,['11.040.70'],ISO/TC 172/SC 7,9599,[15898],[69042],"['en','fr']",5,<p>ISO 8596:2009 specifies a range of Landolt ring optotypes and describes a method for measuring distance visual acuity under daylight conditions for the purposes of certification or licensing.</p><p>It is neither intended as a standard for clinical measurements nor for the certification of blindness or partial sight.</p>

15900,IS,,ISO 8598:1996,Optics and optical instruments — Focimeters,Optique et instruments d'optique — Frontofocomètres,1996-07-25,1,['11.040.70'],ISO/TC 172/SC 7,9599,,"[51053,44535]","['en','fr']",5,

30378,IS,Cor,ISO 8598:1996/Cor 1:1998,Optics and optical instruments — Focimeters — Technical Corrigendum 1,Optique et instruments d'optique — Frontofocomètres — Rectificatif technique 1,1998-04-23,1,['11.040.70'],ISO/TC 172/SC 7,9599,,"[51053,44535]",['en'],1,

15901,IS,,ISO 8599:1994,Optics and optical instruments — Contact lenses — Determination of the spectral and luminous transmittance,Optique et instruments d'optique — Lentilles de contact — Détermination du facteur spectral de transmission et du facteur relatif de transmission dans le visible,1994-11-24,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[34479],"['en','fr']",5,<p>Specifies a method for determining the spectral transmittance and the luminous transmittance of contact lenses.</p>

3736,IS,,ISO 86:1974,"Steel — Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick","Acier — Essai de traction des tôles et feuillards d'épaisseur inférieure à 3 mm et au moins égale à 0,5 mm",1974-08-01,1,"['77.040.10','77.140.50']",ISO/TC 164/SC 1,9599,,[13414],"['en','fr']",10,

5240,IS,,ISO 860:1996,Terminology work — Harmonization of concepts and terms,Travaux terminologiques — Harmonisation des notions et des termes,1996-06-20,2,['01.020'],ISO/TC 37/SC 1,9599,[5239],"[36312,40130]","['en','fr']",6,

15902,IS,,ISO 8600-1:1997,Optics and optical instruments — Medical endoscopes and endoscopic accessories — Part 1: General requirements,Optique et instruments d'optique — Endoscopes médicaux et accessoires d'endoscopie — Partie 1: Prescriptions générales,1997-06-05,1,['11.040.55'],ISO/TC 172/SC 5,9599,,[39935],"['en','fr']",8,

39935,IS,,ISO 8600-1:2005,Optics and photonics — Medical endoscopes and endotherapy devices — Part 1: General requirements,Optique et photonique — Endoscopes médicaux et dispositifs d'endothérapie — Partie 1: Exigences générales,2005-05-13,2,['11.040.55'],ISO/TC 172/SC 5,9599,[15902],[53700],"['en','ru']",10,<p>ISO 8600-1:2005 defines terms and gives requirements for endoscopes and endotherapy devices used in the practice of medicine. </p>

53700,IS,,ISO 8600-1:2013,Endoscopes — Medical endoscopes and endotherapy devices — Part 1: General requirements,Endoscopes — Endoscopes médicaux et dispositifs d'endothérapie — Partie 1: Exigences générales,2013-03-06,3,['11.040.55'],ISO/TC 172/SC 5,9599,[39935],[67550],"['en','ru']",13,<p>ISO 8600-1:2013 gives definitions of terms and requirements for endoscopes and endotherapy devices used in the practice of medicine.</p>

67550,IS,,ISO 8600-1:2015,Endoscopes — Medical endoscopes and endotherapy devices — Part 1: General requirements,Endoscopes — Endoscopes médicaux et dispositifs d'endothérapie — Partie 1: Exigences générales,2015-10-09,4,['11.040.55'],ISO/TC 172/SC 5,9599,[53700],[84216],['en'],13,<p>ISO 8600-1:2015 gives definitions of terms and requirements for endoscopes and endotherapy devices used in the practice of medicine.</p>

24589,IS,,ISO 8600-2:2002,Optics and optical instruments — Medical endoscopes and endoscopic accessories — Part 2: Particular requirements for rigid bronchoscopes,Optique et instruments d'optique — Endoscopes médicaux et accessoires endoscopiques — Partie 2: Exigences particulières pour bronchoscopes rigides,2002-08-22,1,['11.040.55'],ISO/TC 172/SC 5,9599,,"[66090,62966]","['en','fr']",12,

2607,IS,,ISO 8600-3:1997,Optics and optical instruments — Medical endoscopes and endoscopic accessories — Part 3: Determination of field of view and direction of view of endoscopes with optics,Optique et instruments d'optique — Endoscopes médicaux et leurs accessoires — Partie 3: Détermination du champ d'observation et de la direction d'observation des endoscopes optiques,1997-07-03,1,['11.040.55'],ISO/TC 172/SC 5,9599,,[65018],"['en','fr']",4,

37727,IS,Amd,ISO 8600-3:1997/Amd 1:2003,Optics and optical instruments — Medical endoscopes and endoscopic accessories — Part 3: Determination of field of view and direction of view of endoscopes with optics — Amendment 1,Optique et instruments d'optique — Endoscopes médicaux et leurs accessoires — Partie 3: Détermination du champ d'observation et de la direction d'observation des endoscopes optiques — Amendement 1,2003-12-01,1,['11.040.55'],ISO/TC 172/SC 5,9599,,[65018],['en'],1,

22181,IS,,ISO 8600-4:1997,Optics and optical instruments — Medical endoscopes and certain accessories — Part 4: Determination of maximum width of insertion portion,Optique et instruments d'optique — Endoscopes médicaux et certains de leurs accessoires — Partie 4: Détermination de la largeur maximale de la partie insérée,1997-07-03,1,['11.040.55'],ISO/TC 172/SC 5,9599,,[62967],"['en','fr']",2,

62967,IS,,ISO 8600-4:2014,Endoscopes — Medical endoscopes and endotherapy devices — Part 4: Determination of maximum width of insertion portion,Endoscopes — Endoscopes médicaux et dispositifs d'endothérapie — Partie 4: Détermination de la largeur maximale de la partie insérée,2014-03-13,2,['11.040.55'],ISO/TC 172/SC 5,9599,[22181],[84217],"['en','ru']",2,<p>ISO 8600-4:2014 specifies a method of measurement of the maximum insertion portion width of medical endoscopes and certain endoscopic accessories.</p>

34990,IS,,ISO 8600-5:2005,Optics and photonics — Medical endoscopes and endotherapy devices — Part 5: Determination of optical resolution of rigid endoscopes with optics,Optique et photonique — Endoscopes médicaux et dispositifs d'endothérapie — Partie 5: Détermination de la résolution optique des endoscopes optiques rigides,2005-04-01,1,"['37.020','11.040.55']",ISO/TC 172/SC 5,9599,,[65019],"['en','ru']",3,<p>ISO 8600-5:2005 specifies a test method for determining the optical resolution of rigid endoscopes with optics designed for use in the practice of medicine for type testing. Endoscopes having a fibre-optic or opto-electronic imaging system are excluded.</p>

36294,IS,,ISO 8600-6:2005,Optics and photonics — Medical endoscopes and endotherapy devices — Part 6: Vocabulary,Optique et photonique — Endoscopes médicaux et dispositifs d'endothérapie — Partie 6: Vocabulaire,2005-04-01,1,"['37.020','11.040.55','01.040.37']",ISO/TC 172/SC 5,9599,,[65020],"['en','ru']",7,<p>ISO 8600-6:2005 defines terms for endoscopes and endotherapy devices commonly used in the endoscopic area.</p>

15903,IS,,ISO 8601:1988,Data elements and interchange formats — Information interchange — Representation of dates and times,Éléments de données et formats d'échange — Échange d'information — Représentation de la date et de l'heure,1988-06-16,1,['01.140.30'],ISO/TC 154,9599,"[6781,6782,7679,9722,8554]",[26780],"['en','fr']",14,

15905,IS,Cor,ISO 8601:1988/Cor 1:1991,Data elements and interchange formats — Information interchange — Representation of dates and times — Technical Corrigendum 1,Éléments de données et formats d'échange — Échange d'information — Représentation de la date et de l'heure — Rectificatif technique 1,1991-05-09,1,['01.140.30'],ISO/TC 154,9599,,[26780],['en'],1,

26780,IS,,ISO 8601:2000,Data elements and interchange formats — Information interchange — Representation of dates and times,Éléments de données et formats d'échange — Échange d'information — Représentation de la date et de l'heure,2000-12-21,2,['01.140.30'],ISO/TC 154,9599,"[15903,15905]","[34792,40874]",['en'],29,

40874,IS,,ISO 8601:2004,Data elements and interchange formats — Information interchange — Representation of dates and times,Éléments de données et formats d'échange — Échange d'information — Représentation de la date et de l'heure,2004-12-03,3,['01.140.30'],ISO/TC 154,9599,[26780],"[70907,70908]",['en'],33,"<p>ISO 8601:2004 is applicable whenever representation of dates in the Gregorian calendar, times in the 24-hour timekeeping system, time intervals and recurring time intervals or of the forma

15906,IS,,ISO 8602:1987,Information processing systems — Open Systems Interconnection — Protocol for providing the connectionless-mode transport service,Systèmes de traitement de l'information — Interconnexion de systèmes ouverts — Spécification du protocole pour fournir un service de transport en mode sans connexion,1987-12-17,1,['35.100.40'],ISO/IEC JTC 1/SC 6,9599,,[15907],"['en','fr']",14,

15909,IS,,ISO 8604:1988,Plastics — Prepregs — Definitions of terms and symbols for designations,Plastiques — Préimprégnés — Définitions de termes et symboles pour les désignations,1988-08-18,1,"['83.120','01.040.83']",ISO/TC 61/SC 1,9599,,[28176],"['en','fr']",5,"<p>Defines in English and French 36 terms and 25 letter symbols used in the designation, production and use of crosslinkable prepregs. These include the terms concerning raw materials, types of prepreg products, and special grades of prepregs. The symbols, which refer specifically to prepreg products are designating product type, resin type, reinforciment type, reinforcement form and reinforcement orientation.</p>"

15910,IS,,ISO 8605:1989,Textile glass reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification,Plastiques renforcés au verre textile — Mats préimprégnés SMC — Base de spécification,1989-11-30,1,['83.120'],ISO/TC 61/SC 13,9599,,[33329],"['en','fr']",6,

33329,IS,,ISO 8605:2001,Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification,Plastiques renforcés au verre textile — Mats préimprégnés SMC — Base de spécification,2001-05-31,2,['83.120'],ISO/TC 61/SC 13,9599,[15910],[84871],"['en','fr']",9,

15911,IS,,ISO 8606:1990,Plastics — Prepregs — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Basis for a specification,Plastiques — Préimprégnés — Mélanges à mouler en masse BMC et DMC — Base de spécification,1990-09-27,1,['83.120'],ISO/TC 61/SC 13,9599,,"[34860,86960]","['en','fr']",6,

15913,IS,,ISO 8608:1995,Mechanical vibration — Road surface profiles — Reporting of measured data,Vibrations mécaniques — Profils de routes — Méthode de présentation des résultats de mesures,1995-09-14,1,"['93.080.10','17.160']",ISO/TC 108/SC 2,9599,,[71202],"['en','fr']",29,"<p>Describes an uniform method of reporting measured vertical surface profile data from streets, roads, highways and off-road terrain. Measurement methods and measurement equipment are not included.</p>"

34356,IS,,ISO 8611-1:2004,Pallets for materials handling — Flat pallets — Part 1: Test methods,Palettes pour la manutention — Palettes plates — Partie 1: Méthodes d'essai,2004-02-24,1,['55.180.20'],ISO/TC 51,9599,"[15917,15918]",[50114],"['en','fr']",27,<p>ISO 8611-1:2004 specifies test methods of existing and prototype flat pallets for materials handling for all types of use</p><p>It cannot be used to evaluate a pallet to normative ISO requirements without the additional application of ISO/TS 8611-2 and ISO/TS 8611-3.</p>

50114,IS,,ISO 8611-1:2011,Pallets for materials handling — Flat pallets — Part 1: Test methods,Palettes pour la manutention — Palettes plates — Partie 1: Méthodes d'essai,2011-05-05,2,['55.180.20'],ISO/TC 51,9599,[34356],[78857],"['en','fr']",29,"<p>ISO 8611-1:2011 specifies the test methods available for evaluating new flat pallets for materials handling.</p><p>The test methods are split into groups for nominal load testing, maximum working load testing and durability comparison testing.</p><p>It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pa

78857,IS,,ISO 8611-1:2021,Pallets for materials handling — Flat pallets — Part 1: Test methods,Palettes pour la manutention — Palettes plates — Partie 1: Méthodes d'essai,2021-12-07,3,['55.180.20'],ISO/TC 51,9599,[50114],[87543],"['en','fr']",29,"<p>This document specifies the test methods available for evaluating new flat pallets for materials handling.</p><p>The test methods are split into groups for:</p><p>— nominal load testing;</p><p>— maximum working load testing;</p><p>— durability comparison testing.</p><p>This document does not apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contrib

15916,IS,,ISO 8611:1988,General-purpose flat pallets for through transit of goods — Test methods,Palettes plates d'usage général pour le transport de marchandises — Méthodes d'essai,1988-12-29,1,['55.180.20'],ISO/TC 51,9599,,[15917],"['en','fr']",,

15917,IS,,ISO 8611:1991,General-purpose flat pallets for through transit of goods — Test methods,Palettes plates d'usage général pour le transport de marchandises — Méthodes d'essai,1991-06-20,2,['55.180.20'],ISO/TC 51,9599,[15916],"[34398,34356,34144]","['en','fr']",17,"<p>Specifies test methods, particularly appropriate for pallet prototypes. The tests are principally intended for the evaluation of existing pallets or of new designs of pallets in relation to their designed load capacity. The tests may be valuable in point of manufacture quality assurance and field testing of pallets, but not for research purposes.</p>"

15918,IS,Cor,ISO 8611:1991/Cor 1:1991,General-purpose flat pallets for through transit of goods — Test methods — Technical Corrigendum 1,Palettes plates d'usage général pour le transport de marchandises — Méthodes d'essai — Rectificatif technique 1,1991-12-05,2,['55.180.20'],ISO/TC 51,9599,,"[34398,34356,34144]","['en','fr']",1,"<p>Clause 2: correct the title of ISO 2244 as follows: ISO 2244:1985, Packaging - Complete, filled transport packages - Horizontal impact tests (horizontal or inclined plane test; pendulum test).</p>"

50115,IS,,ISO 8611-2:2011,Pallets for materials handling — Flat pallets — Part 2: Performance requirements and selection of tests,Palettes pour la manutention — Palettes plates — Partie 2: Exigences de performance et sélection des essais,2011-05-05,1,['55.180.20'],ISO/TC 51,9599,[34398],[78858],"['en','fr']",12,"<p>ISO 8611-2:2011 specifies the performance requirements to establish nominal loads for new flat pallets.</p><p>It also specifies the tests required for new flat pallets in various handling environments and the performance requirements for tests with payloads. It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechani

64800,IS,Amd,ISO 8611-2:2011/Amd 1:2016,Pallets for materials handling — Flat pallets — Part 2: Performance requirements and selection of tests — Amendment 1,Palettes pour la manutention — Palettes plates — Partie 2: Exigences de performance et sélection des essais — Amendement 1,2016-03-15,1,['55.180.20'],ISO/TC 51,9599,,[78858],"['en','fr']",1,

78858,IS,,ISO 8611-2:2021,Pallets for materials handling — Flat pallets — Part 2: Performance requirements and selection of tests,Palettes pour la manutention — Palettes plates — Partie 2: Exigences de performance et sélection des essais,2021-12-07,2,['55.180.20'],ISO/TC 51,9599,"[50115,64800]",[87544],"['en','fr']",13,"<p>This document specifies the performance requirements to establish nominal loads for new flat pallets.</p><p>It also specifies the tests required for new flat pallets in various handling environments and the performance requirements for tests with payloads. This document does not apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be

29653,IS,,ISO 8612:2001,Ophthalmic instruments — Tonometers,Instruments ophtalmiques — Tonomètres,2001-04-26,1,['11.040.70'],ISO/TC 172/SC 7,9599,[15919],[44536],"['en','fr']",13,

15926,IS,,ISO 8613-1:1989,Information processing — Text and office systems — Office Document Architecture (ODA) and interchange format — Part 1: Introduction and general principles (Provisionaly retained edition),Traitement de l'information — Bureautique — Architecture des documents de bureau (ODA) et format d'échange — Partie 1: Introduction et principes généraux,1989-08-31,1,['35.240.20'],ISO/IEC JTC 1,9599,,[15928],"['en','fr']",38,

15932,IS,,ISO 8613-2:1989,Information processing — Text and office systems — Office Document Architecture (ODA) and interchange format — Part 2: Document structures,Traitement de l'information — Bureautique — Architecture des documents de bureau (ODA) et format d'échange — Partie 2: Structures des documents,1989-08-31,1,['35.240.20'],ISO/IEC JTC 1,9599,,[25650],"['en','fr']",230,

15934,IS,,ISO 8613-4:1989,Information processing — Text and office systems — Office Document Architecture (ODA) and interchange format — Part 4: Document profile (Provisionaly retained edition),Traitement de l'information — Bureautique — Architecture des documents de bureau (ODA) et format d'échange — Partie 4: Profil de documents,1989-08-31,1,['35.240.20'],ISO/IEC JTC 1,9599,,[22941],"['en','fr']",20,

15936,IS,,ISO 8613-5:1989,Information processing — Text and office systems — Office Document Architecture (ODA) and interchange format — Part 5: Office Document Interchange Format (ODIF) (Provisionaly retained edition),Traitement de l'information — Bureautique — Architecture des documents de bureau (ODA) et format d'échange — Partie 5: Format d'échange de documents de bureau (ODIF),1989-08-31,1,['35.240.20'],ISO/IEC JTC 1,9599,,[23410],"['en','fr']",88,

15937,IS,,ISO 8613-6:1989,Information processing — Text and office systems — Office Document Architecture (ODA) and interchange format — Part 6: Character content architectures,Traitement de l'information — Bureautique — Architecture des documents de bureau (ODA) et format d'échange — Partie 6: Architecture des contenus de caractères,1989-08-31,1,['35.240.20'],ISO/IEC JTC 1,9599,,[22943],"['en','fr']",91,

15938,IS,,ISO 8613-7:1989,Information processing — Text and office systems — Office Document Architecture (ODA) and interchange format — Part 7: Raster graphics content architectures,Traitement de l'information — Bureautique — Architecture des documents de bureau (ODA) et format d'échange — Partie 7: Architecture des contenus des caractères graphiques à raster,1989-08-31,1,['35.240.20'],ISO/IEC JTC 1,9599,,[23411],"['en','fr']",46,

15939,IS,,ISO 8613-8:1989,Information processing — Text and office systems — Office Document Architecture (ODA) and interchange format — Part 8: Geometric graphics content architectures,Traitement de l'information — Bureautique — Architecture des documents de bureau (ODA) et format d'échange — Partie 8: Architecture des contenus de caractères graphiques géométriques,1989-08-31,1,['35.240.20'],ISO/IEC JTC 1,9599,,[23412],"['en','fr']",51,

15947,IS,,ISO 8618:1987,Plastics — Liquid phenolic resins — Conventional determination of non-volatile matter,Plastiques — Résines phénoliques liquides — Détermination de l'extrait sec conventionnel,1987-09-17,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[24006],"['en','fr']",2,

24006,IS,,ISO 8618:1995,Plastics — Liquid phenolic resins — Conventional determination of non-volatile matter,Plastiques — Résines phénoliques liquides — Détermination de l'extrait sec conventionnel,1995-12-27,2,['83.080.10'],ISO/TC 61/SC 12,9599,[15947],[30333],"['en','fr']",3,"<p>Specifies a method for the conventional determination of the non-volatile matter of liquid phenolic resins (resols, novolak solutions etc.). Applicable to commercial products or for resins in various stages of manufacture. Replaces the first edition.</p>"

15948,IS,,ISO 8619:1988,Plastics — Phenolic resin powder — Determination of flow distance on a heated glass plate,Plastiques — Résines phénoliques en poudre — Détermination de l'écoulement à l'état fondu sur une plaque de verre chauffé,1988-12-01,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[24005],"['en','fr']",3,

24005,IS,,ISO 8619:1995,Plastics — Phenolic resin powder — Determination of flow distance on a heated glass plate,Plastiques — Résines phénoliques en poudre — Détermination de l'écoulement à l'état fondu sur une plaque de verre chauffée,1995-12-27,2,['83.080.10'],ISO/TC 61/SC 12,9599,[15948],[36284],"['en','fr']",3,"<p>Specifies a method for the determination of the flow distance of powdered heat-setting phenolic resins for production and control. With reference to tablet formation, test temperature and angle of inclination of the glass plate, measurement of the flow distance involves arbitrarily defined conditions.</p>"

15949,IS,,ISO 8620:1986,Plastics — Phenolic resin powder — Sieve analysis using air-jet sieve apparatus,Plastiques — Résines phénoliques en poudre — Analyse granulométrique sur tamiseuse à dépression d'air,1986-09-04,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[10545],"['en','fr']",2,

15950,IS,,ISO 8622:1990,Cinematography — Magnetic sound records on 70 mm motion-picture release prints with magnetic stripes — A-chain reproduction characteristics,Cinématographie — Enregistrements sonores sur copies 70 mm à pistes magnétiques — Caractéristiques de transfert de la chaîne A,1990-06-07,1,['37.060.20'],ISO/TC 36,9599,,[27543],"['en','fr']",6,

15951,IS,,ISO 8623:1997,Tall-oil fatty acids for paints and varnishes — Specifications and test methods,Acides gras d'huile de tall pour peintures et vernis — Spécifications et méthodes d'essai,1997-02-20,1,['87.060.99'],ISO/TC 35,9599,,[63948],"['en','fr']",7,<p>Specifies the requirements and the corresponding test methods for destilled tall-oil fatty acids for paints and varnishes.</p>