Withdrawn and superseded ISO standards — page 165 of 246

58098,IS,,ISO 7967-12:2014,Reciprocating internal combustion engines — Vocabulary of components and systems — Part 12: Exhaust emission control systems,Moteurs alternatifs à combustion interne — Vocabulaire des composants et des systèmes — Partie 12: Systèmes de contrôle des émissions de gaz d'échappement,2014-11-26,1,"['01.040.27','27.020']",ISO/TC 70,9599,,[81961],"['en','fr']",8,"<p>ISO 7967-12:2014 establishes a vocabulary for emission control systems of reciprocating internal combustion engines.</p><p>ISO 2710‑1 gives a classification of reciprocating internal combustion engines and denotes basic terms and definitions of such engines and their characteristics.</p><p>In this part of ISO

14945,IS,,ISO 7967-2:1987,Reciprocating internal combustion engines — Vocabulary of components and systems — Part 2: Main running gear,Moteurs alternatifs à combustion interne — Vocabulaire des composants et des systèmes — Partie 2: Mécanismes principaux,1987-10-22,1,"['01.040.27','27.020']",ISO/TC 70,9599,,"[40077,43490]","['en','fr','ru']",19,"<p>Establishes a vocabulary in English, French, and Russian with alphabetical indexes. The series consists of the parts 1 to 9. The terms and definitions are listed in a table which includes illustrations. In some illustrations, the component is highlighted to aid identification. ISO 2710 gives a classification of engines and defines basis terms of s

14946,IS,Amd,ISO 7967-2:1987/Amd 1:1999,Reciprocating internal combustion engines — Vocabulary of components and systems — Part 2: Main running gear — Amendment 1,Moteurs alternatifs à combustion interne — Vocabulaire des composants et des systèmes — Partie 2: Mécanismes principaux — Amendement 1,1999-12-09,1,"['01.040.27','27.020']",ISO/TC 70,9599,,"[40077,43490]","['en','fr']",11,

14947,IS,,ISO 7967-3:1987,"Reciprocating internal combustion engines — Vocabulary of components and systems — Part 3: Valves, camshaft drive and actuating mechanisms","Moteurs alternatifs à combustion interne — Vocabulaire des composants et des systèmes — Partie 3: Soupapes, arbre à cames et mécanismes de commande",1987-10-22,1,"['01.040.27','27.020']",ISO/TC 70,9599,,[45616],"['en','fr','ru']",15,"<p>Establishes a vocabulary in English, French, and Russian with alphabetical indexes. The series consists of the parts 1 to 9. The terms and definitions are listed in a table which includes illustrations. In some illustrations, the component is highlighted to aid identification. ISO 2710 gives a

45616,IS,,ISO 7967-3:2010,"Reciprocating internal combustion engines — Vocabulary of components and systems — Part 3: Valves, camshaft drives and actuating mechanisms","Moteurs alternatifs à combustion interne — Vocabulaire des composants et des systèmes — Partie 3: Soupapes, arbres à cames et mécanismes de commande",2010-08-17,2,"['01.040.27','27.020']",ISO/TC 70,9599,[14947],[83501],"['en','fr']",11,"<p>ISO 7967-3:2010 defines terms relating to the valves, camshaft drive and actuating mechanisms of reciprocating internal combustion engines.</p>"

14948,IS,,ISO 7967-4:1988,Reciprocating internal combustion engines — Vocabulary of components and systems — Part 4: Pressure charging and air/exhaust gas ducting systems,Moteurs alternatifs à combustion interne — Vocabulaire des composants et des systèmes — Partie 4: Compresseur et circuits d'admission et d'échappement,1988-02-04,1,"['01.040.27','27.020']",ISO/TC 70,9599,,[40073],"['en','fr','ru']",14,"<p>Establishes a vokabulary in English, French, and Russian with alphabetical indexes. The series consists of the parts 1 to 9. The terms an definitions are listed in a table which includes illustrations. In some illustrations, the component is highlighted to aid identification. ISO 2710 give

14950,IS,,ISO 7967-5:1992,Reciprocating internal combustion engines — Vocabulary of components and systems — Part 5: Cooling systems,Moteurs alternatifs à combustion interne — Vocabulaire des composants et des systèmes — Partie 5: Systèmes de refroidissement,1992-04-30,1,"['01.040.27','27.020']",ISO/TC 70,9599,,"[22487,37274]","['en','fr','ru']",13,"<p>Includes 31 relevant terms and definitions in English, French and Russian listed as a table and, at the end, in alphabetical indices. Where necessary, illustrations are given which show the typical shape of the component.</p>"

37274,IS,,ISO 7967-5:2003,Reciprocating internal combustion engines — Vocabulary of components and systems — Part 5: Cooling systems,Moteurs alternatifs à combustion interne — Vocabulaire des composants et des systèmes — Partie 5: Systèmes de refroidissement,2003-02-05,2,"['01.040.27','27.020']",ISO/TC 70,9599,[14950],"[43491,40830]","['en','fr']",16,"<p>ISO 7967-5 defines terms relating to cooling systems and their components as part of a vocabulary, in English, French and Russian, for components and systems of reciprocating internal combustion engines. </p>"

14951,IS,,ISO 7967-6:1992,Reciprocating internal combustion engines — Vocabulary of components and systems — Part 6: Lubricating systems,Moteurs alternatifs à combustion interne — Vocabulaire des composants et des systèmes — Partie 6: Systèmes de lubrification,1992-04-30,1,"['01.040.27','27.020']",ISO/TC 70,9599,,"[22488,40074]","['en','fr','ru']",13,"<p>Includes 35 relevant terms and definitions in English, French and Russian listed as a table and, at the end, in alphabetical indices. Where necessary, illustrations are given which show the typical shape of the component.</p>"

40074,IS,,ISO 7967-6:2005,Reciprocating internal combustion engines — Vocabulary of components and systems — Part 6: Lubricating systems,Moteurs alternatifs à combustion interne — Vocabulaire des composants et des systèmes — Partie 6: Systèmes de lubrification,2005-06-08,2,"['01.040.27','27.020']",ISO/TC 70,9599,[14951],[81215],"['en','fr']",14,<p>ISO 7967-6:2005 defines terms relating to lubricating systems.</p>

14952,IS,,ISO 7967-7:1998,Reciprocating internal combustion engines — Vocabulary of components and systems — Part 7: Governing systems,Moteurs alternatifs à combustion interne — Vocabulaire des composants et des systèmes — Partie 7: Systèmes de régulation,1998-09-24,1,"['01.040.27','27.020']",ISO/TC 70,9599,,[40075],"['en','fr','ru']",29,

14953,IS,,ISO 7967-8:1990,Reciprocating internal combustion engines — Vocabulary of components and systems — Part 8: Starting systems,Moteurs alternatifs à combustion interne — Vocabulaire des composants et des systèmes — Partie 8: Systèmes de démarrage,1990-05-31,1,"['01.040.27','27.020']",ISO/TC 70,9599,,[14954],"['en','fr','ru']",7,

14954,IS,,ISO 7967-8:1994,Reciprocating internal combustion engines — Vocabulary of components and systems — Part 8: Starting systems,Moteurs alternatifs à combustion interne — Vocabulaire des composants et systèmes — Partie 8: Systèmes de démarrage,1994-11-10,2,"['01.040.27','27.020']",ISO/TC 70,9599,[14953],[40076],"['en','fr','ru']",9,"<p>Cancels and replaces the first edition (1990). Defines terms in English, French and Russian, relating to starting systems for reciprocating internal combustion engines. Gives a classification of these engines and defines basic terms of such engines, their working and characteristics.</p>"

14955,IS,,ISO 7967-9:1996,Reciprocating internal combustion engines — Vocabulary of components and systems — Part 9: Control and monitoring systems,Moteurs alternatifs à combustion interne — Vocabulaire des composants et des systèmes — Partie 9: Systèmes de commande et de surveillance,1996-10-31,1,"['01.040.27','27.020']",ISO/TC 70,9599,,[53437],"['en','fr','ru']",17,<p>Defines terms relating to the control and monitoring systems of reciprocating internal combustion engines.</p>

14958,IS,,ISO 7970:1989,Wheat — Specification,Blé tendre — Spécifications,1989-06-15,1,['67.060'],ISO/TC 34/SC 4,9599,,[26723],"['en','fr']",9,

26723,IS,,ISO 7970:2000,Wheat (Triticum aestivum L.) — Specification,Blé tendre (Triticum aestivum L.) — Spécifications,2000-06-08,2,['67.060'],ISO/TC 34/SC 4,9599,[14958],[43302],"['en','fr']",13,

43302,IS,,ISO 7970:2011,Wheat (Triticum aestivum L.) — Specification,Blé tendre (Triticum aestivum L.) — Spécifications,2011-10-31,3,['67.060'],ISO/TC 34/SC 4,9599,[26723],[75731],"['en','fr','ru']",12,<p>ISO 7970:2011 establishes minimum specifications for wheat (<i>Triticum aestivum</i> L.) intended for human consumption and which is the subject of international trade.</p>

35696,IS,,ISO 7971-1:2003,"Cereals — Determination of bulk density, called 'mass per hectolitre' — Part 1: Reference method","Céréales — Détermination de la masse volumique, dite 'masse à l'hectolitre' — Partie 1: Méthode de référence",2003-06-27,1,['67.060'],ISO/TC 34/SC 4,9599,[14959],[44524],['en'],8,"<p>ISO 7971-1:2003 specifies the reference method for the determination of bulk density, called 'mass per hectolitre', of cereals.</p><p>Several routine methods are used in different countries. A routine method for the determination of bulk density, called 'mass per hectolitre' utilizing a 1 litre measuring container is given in ISO 7971-2.</p>"

14959,IS,,ISO 7971:1986,"Cereals — Determination of bulk density, called 'mass per hectolitre' (Reference method)","Céréales — Détermination de la masse volumique, dite 'masse à l'hectolitre' (Méthode de référence)",1986-03-27,1,['67.060'],ISO/TC 34/SC 4,9599,,"[14960,35696]","['en','fr']",5,<p>The method consists in pouring a sample through a hopper into a 20 litr container and weighing. A figure shows an apparatus for determing. It shall comply with the requirements of the OIML Recommendation No. 15.</p>

20818,IS,,ISO 7971-2:1995,"Cereals — Determination of bulk density, called 'mass per hectolitre' — Part 2: Routine method","Céréales — Détermination de la masse volumique, dite 'masse à l'hectolitre' — Partie 2: Méthode pratique",1995-11-23,1,['67.060'],ISO/TC 34/SC 4,9599,,[44596],"['en','fr']",6,"<p>Describes a routine method for the determination of bulk density, called 'mass per hectolitre' of cereals (wheat, barley, oats and rye), utilizing a 1 litre measuring container.</p>"

44525,IS,,ISO 7971-2:2009,"Cereals — Determination of bulk density, called mass per hectolitre — Part 2: Method of traceability for measuring instruments through reference to the international standard instrument","Céréales — Détermination de la masse volumique, dite masse à l'hectolitre — Partie 2: Méthode de raccordement des instruments de mesure à l'étalon international",2009-07-31,2,['67.060'],ISO/TC 34/SC 4,9599,,[70016],"['en','fr']",19,"<p>ISO 7971-2:2009 specifies a test method for ensuring the traceability of mass per hectolitre measuring instruments through reference to standard measurement instruments. The mass per hectolitre or bulk density is of commercial importance for grain c

44596,IS,,ISO 7971-3:2009,"Cereals — Determination of bulk density, called mass per hectolitre — Part 3: Routine method","Céréales — Détermination de la masse volumique, dite masse à l'hectolitre — Partie 3: Méthode pratique",2009-07-31,1,['67.060'],ISO/TC 34/SC 4,9599,[20818],[70015],"['en','fr']",14,"<p>ISO 7971-3:2009 specifies a routine method for the determination of bulk density, called “mass per hectolitre” of cereals as grain using manual or automatic, mechanical, electric or electronic mass per hectolitre measuring instruments.</p>"

14964,IS,,ISO 7975:1985,Road vehicles — Braking in a turn — Open loop test procedure,Véhicules routiers — Freinage en courbe — Méthode d'essai en boucle ouverte,1985-06-27,1,['43.020'],ISO/TC 22,9599,,[21462],"['en','fr']",12,

21462,IS,,ISO 7975:1996,Passenger cars — Braking in a turn — Open-loop test procedure,Voitures particulières — Freinage en virage — Méthode d'essai en boucle ouverte,1996-12-26,2,['43.100'],ISO/TC 22,9599,[14964],[37217],['en'],30,<p>Specifies an open-loop test procedure to determine the effect of braking on course holding and directional behaviour if a vehicle whose steady-state circular motion is altered by a braking action only.</p>

37217,IS,,ISO 7975:2006,Passenger cars — Braking in a turn — Open-loop test method,Voitures particulières — Freinage en virage — Méthode d'essai en boucle ouverte,2006-03-29,3,['43.100'],ISO/TC 22/SC 33,9599,[21462],[67974],"['en','fr']",22,"<p>ISO 7975:2006 specifies an open-loop test procedure to examine the effect of braking on course holding and directional behaviour of a vehicle. Specifically, the procedure determines how the steady-state circular response of a vehicle is altered by a braking action only. ISO 7975:2006 applies to passenger cars as defined in ISO 3833 and to light trucks.</p><p>The open-loop manoeuvre specified in this test procedure is not representative of real driving

14975,IS,,ISO 7982-1:1987,Bank telecommunication — Funds transfer messages — Part 1: Vocabulary and data elements,Télécommunication bancaire — Messages de transfert de fonds — Partie 1: Vocabulaire et éléments de données,1987-10-08,1,"['03.060','01.040.03']",ISO/TC 68,9599,,[14976],"['en','fr']",19,

14986,IS,,ISO 7989:1988,Zinc coatings for steel wire,Dépôts de zinc sur fils d'acier,1988-12-15,1,"['77.140.65','25.220.40']",ISO/TC 17/SC 17,9599,,"[39818,39137]","['en','fr']",5,"<p>Specifies requirements for the mass, quality and testing of zinc coatings on steel wire of circular cross-section. Gives definitions, coating requirements, test requirements. Annexes A and B contain a volumetric method and a gravimetric method, respectively, for determination of mass of zinc deposited per unit surface area.</p>"

39818,IS,,ISO 7989-2:2007,Steel wire and wire products — Non-ferrous metallic coatings on steel wire — Part 2: Zinc or zinc-alloy coating,Fils et produits tréfilés en acier — Revêtements métalliques non ferreux sur fils d'acier — Partie 2: Revêtements de zinc ou d'alliages de zinc,2007-01-17,1,"['77.140.65','25.220.40']",ISO/TC 17/SC 17,9599,[14986],[74866],"['en','fr']",14,"<p>ISO 7989-2:2007 specifies the requirements for the coating mass per unit area, for other properties and also for testing of zinc or zinc-alloy coatings on steel wire and steel wire products, of circular or other section.</p>"

5137,IS,,ISO 799:1980,Shipbuilding — Pilot ladders,Construction navale — Échelles de pilote,1980-07-01,1,['47.020.50'],ISO/TC 8/SC 1,9599,[75575],[5138],['en'],5,

5138,IS,,ISO 799:1986,Shipbuilding — Pilot ladders,Construction navale — Échelles de pilote,1986-09-25,2,['47.020.50'],ISO/TC 8/SC 1,9599,[5137],[28374],"['en','fr']",5,<p>Specifies requirements for a ship's pilot ladder which is provided for a pilot to embark and disembark safely.</p>

28374,IS,,ISO 799:2004,Ships and marine technology — Pilot ladders,Navires et technologie maritime — Échelles de pilote,2004-01-19,3,['47.020.50'],ISO/TC 8/SC 1,9599,[5138],[68808],"['en','ru']",11,"<p>ISO 799:2004 specifies requirements for a ship's pilot ladder which is provided to enable a maritime pilot to embark and disembark a ship safely along a vertical portion of the ship's hull. It is applicable to merchant ships which embark and disembark maritime pilots with the ship underway. National maritime safety administrations are urged to accept ladders complying with ISO 799:2004 on their ships, as complying fully with the requirements of the 1974 International Convention for the Safety

14989,IS,,ISO 7992:1992,Iron ores — Determination of reduction properties under load,Minerais de fer — Détermination des propriétés de réduction sous charge,1992-08-20,1,['73.060.10'],ISO/TC 102/SC 3,9599,,[38073],"['en','fr']",9,"<p>Specifies a method for evaluating the physical stability of iron ores reduced under load and under specific conditions. The specific conditions are: isothermal heating for reduction, a test portion having a specified size and placed in a fixed bed under load, a reducing gas composed of a carbon monoxide/hydrogen/nitrogen mixture, measurement of the differential gas pressure across a bed of the test portion and measurement of the change in the height of the bed.

38073,IS,,ISO 7992:2007,Iron ores for blast furnace feedstocks — Determination of reduction under load,Minerais de fer pour charges de hauts fourneaux — Détermination de la réduction sous charge,2007-10-30,2,['73.060.10'],ISO/TC 102/SC 3,9599,[14989],[62143],['en'],12,"<p>ISO 7992:2007 specifies a method to provide a relative measure for evaluating the structural stability of iron ores, when reduced under conditions resembling those prevailing in the reduction zone of a blast furnace.</p><p>ISO 7992:2007 is applicable to lump ores and hot-bonded pellets.</p>"

62143,IS,,ISO 7992:2015,Iron ores for blast furnace feedstocks — Determination of reduction under load,Minerais de fer pour charges de hauts fourneaux — Détermination de la réduction sous charge,2015-08-14,3,['73.060.10'],ISO/TC 102/SC 3,9599,[38073],[82819],['en'],12,<p>ISO 7992:2015 specifies a method to provide a relative measure for evaluating the structural stability of iron ores when reduced under conditions resembling those prevailing in the reduction zone of a blast furnace.</p><p>ISO 7992:2015 is applicable to lump ores and hot-bonded pellets.</p>

14991,IS,,ISO 7994:1985,"Aerospace — Internal drive, offset cruciform recess (Torq-Set) for rotary fastening devices — Metric series",Aéronautique et espace — Empreinte cruciforme déportée d'entraînement intérieur (Torq-Set) pour dispositifs de fixation montés par rotation — Série métrique,1985-11-07,1,['49.030.20'],ISO/TC 20/SC 4,9599,,[14992],"['en','fr']",10,<p>Gives maximum and minimum dimensional requirements for fastening devices and for the associated drives and gauges. The combinations suggested herein are provided for metric shank diameters. This configuration is intended primarily for use in aerospace applications and other critical areas where high assembly and removal torque capa

14993,IS,,ISO 7995:1985,"Aerospace — Fasteners — Nuts, hexagon, self-locking — Strength classification 1 100 MPa — Maximum operating temperature 235 degrees C",Aéronautique et espace — Éléments de fixation — Écrous hexagonaux à freinage interne — Classe de résistance 1 100 MPa — Température maximale d'utilisation 235 degrés C,1985-05-09,1,['49.030.30'],ISO/TC 20/SC 4,9599,,[14994],['en'],,

14994,IS,,ISO 7995:1988,"Aerospace — Nuts, hexagonal, self-locking, with MJ threads, coated or uncoated, classification 1 100 MPa/235 degrees C, 1 100 MPa/315 degrees C or 1 100 MPa/425 degrees C — Dimensions","Aéronautique et espace — Écrous hexagonaux à freinage interne, à filetage MJ, revêtus ou non revêtus, de classification 1 100 MPa/235 degrés C, 1 100 MPa/315 degrés C ou 1 100 MPa/425 degrés C — Dimensions",1988-12-29,2,['49.030.30'],ISO/TC 20/SC 4,9599,[14993],[31736],"['en','fr']",2,"<p>The values laid down herein have been specified so as to satisfy the requirements laid down in ISO 5858. The values given apply to nuts, a self-locking feature of which is achieved by forming the upp

14997,IS,,ISO 7998:1984,Optics and optical instruments — Spectacle frames — Vocabulary and lists of equivalent terms,Optique et instruments d'optique — Montures de lunettes — Vocabulaire et listes de termes équivalents,1984-11-01,1,"['11.040.70','01.040.11']",ISO/TC 172/SC 7,9599,,[41203],"['en','fr']",9,"<p>Spectrales frames and parts thereof are procedured in large numbers worldwide. In order to facilitate mutual understanding and avoid the use of inappropriate or incorrect terms, the standard defines terms relating to frames for spectacles and eyeglasses in English and French, and lists equivalent terms in (British and American) English, French, Russian, German, Italian and spanish. It do

3585,IS,,ISO 8:1977,Documentation — Presentation of periodicals,Documentation — Présentation des périodiques,1977-09-01,1,['01.140.40'],ISO/TC 46,9599,,"[67723,25439]","['en','fr']",4,"<p>Sets out rules intended to enable editors and publishers to present periodicals in a form which will facilitate their use. Following these rules should help editors and publishers to bring order and clarity to their own work. These requirements are of varying importance and some may go against certain artistic, technical or advertising considerations.</p>"

5139,IS,,ISO 800:1977,Plastics — Phenolic moulding materials — Specification,Plastiques — Matières à mouler phénoplastes — Spécifications,1977-11-01,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[5140],"['en','fr']",4,

5140,IS,,ISO 800:1992,Plastics — Phenolic moulding materials — Specification,Plastiques — Matières à mouler phénoplastes — Spécification,1992-01-30,2,['83.080.10'],ISO/TC 61/SC 12,9599,[5139],"[24610,24611,24609]","['en','fr']",6,"<p>Specifies requirements for the physical and chemical properties of materials, classified by type and grade. Includes four types: A - general purpose; C - heat resistant; D - impact resistant; E - electrical applications.</p>"

50799,IS,,ISO 8000-102:2009,Data quality — Part 102: Master data: Exchange of characteristic data: Vocabulary,Qualité des données — Partie 102: Données permanentes: Échange des données caractéristiques: Vocabulaire,2009-12-15,1,"['25.040.40','01.040.25']",ISO/TC 184/SC 4,9599,,[57436],['en'],1,"<p>ISO 8000-102:2009 contains the vocabulary relating tomaster data quality, for use in connection with the master dataquality series of parts of ISO 8000. ISO 8000-102:2009includes those terms and definitions referenced in published partsof ISO 8000 dealing with master data quality. It is therefore not acomprehensive lexicon for master data quality. ISO 8000-102:2009 includes terms and definitions re

51653,IS,,ISO 8000-110:2009,"Data quality — Part 110: Master data: Exchange of characteristic data: Syntax, semantic encoding, and conformance to data specification","Qualité des données — Partie 110: Données permanentes: Échange des données caractéristiques: Syntaxe, sémantique, encodage et conformité aux spécifications de données",2009-11-05,1,['25.040.40'],ISO/TC 184/SC 4,9599,[50800],[78501],['en'],1,"<p>ISO 8000-110:2009 specifies requirements that can be checkedby computer for the exchange, between organizations and systems, ofmaster data that consists of characteristic data. The focus ofISO 8000-110:2009 is on requirements that can be checked bycomputer.</p>"

70095,IS,,ISO 8000-115:2018,"Data quality — Part 115: Master data: Exchange of quality identifiers: Syntactic, semantic and resolution requirements","Qualité des données — Partie 115: Données permanentes: Échange des identificateurs qualité: Exigences syntaxiques, sémantiques et de résolution",2018-04-27,1,['25.040.40'],ISO/TC 184/SC 4,9599,,[88847],['en'],5,<p>ISO 8000-115:2018 specifies the requirements for the quality identifiers that form part of an exchange of master data. These requirements supplement those of ISO 8000‑110.</p><p>The following are within the scope of ISO 8000-115:2018:</p><p>· the syntax and semantics of quality identifiers to allow the unambiguous

57436,IS,,ISO 8000-2:2012,Data quality — Part 2: Vocabulary,Qualité des données — Partie 2: Vocabulaire,2012-06-14,1,"['25.040.40','01.040.25']",ISO/TC 184/SC 4,9599,[50799],[73456],['en'],7,<div><p>ISO 8000-2:2012 establishes the vocabulary for ISO 8000.</p></div>

73456,IS,,ISO 8000-2:2017,Data quality — Part 2: Vocabulary,Qualité des données — Partie 2: Vocabulaire,2017-08-28,2,"['25.040.40','01.040.25']",ISO/TC 184/SC 4,9599,[57436],[76563],['en'],14,<p>ISO 8000-2:2017 defines terms relating to data quality used in the ISO 8000 series of parts.</p>

74962,IS,Amd,ISO 8000-2:2017/Amd 1:2018,Data quality — Part 2: Vocabulary — Amendment 1,Qualité des données — Partie 2: Vocabulaire — Amendement 1,2018-05-03,2,"['25.040.40','01.040.25']",ISO/TC 184/SC 4,9599,,[76563],['en'],2,

76563,IS,,ISO 8000-2:2018,Data quality — Part 2: Vocabulary,Qualité des données — Partie 2: Vocabulaire,2018-10-29,3,"['25.040.40','01.040.25']",ISO/TC 184/SC 4,9599,"[74962,73456]",[80543],['en'],15,<p>This document defines terms relating to data quality used in the ISO 8000 series of parts.</p><p>Terms and definitions related to quality in general are outside the scope of this document.</p>

80543,IS,,ISO 8000-2:2020,Data quality — Part 2: Vocabulary,Qualité des données — Partie 2: Vocabulaire,2020-06-09,4,"['25.040.40','01.040.25']",ISO/TC 184/SC 4,9599,[76563],[85032],['en'],17,<p>This document defines terms relating to data quality used in the ISO 8000 series of parts.</p>

82594,IS,Amd,ISO 8000-2:2020/Amd 1:2021,Data quality — Part 2: Vocabulary — Amendment 1,Qualité des données — Partie 2: Vocabulaire — Amendement 1,2021-05-18,4,"['25.040.40','01.040.25']",ISO/TC 184/SC 4,9599,,[85032],['en'],5,

30669,IS,,ISO 80000-1:2009,Quantities and units — Part 1: General,Grandeurs et unités — Partie 1: Généralités,2009-11-17,1,['01.060'],ISO/TC 12,9599,"[28988,3621,28985,40910,5448]","[64972,76921]","['en','fr']",41,"<p>ISO 80000-1:2009 gives general information and definitions concerning quantities, systems of quantities, units, quantity and unit symbols, and coherent unit systems, especially the International System of Quantities, ISQ, and the International System of Units, SI.</p><p>The principles laid down in ISO 80000-1:2009 are intended for general use within the various fields of science and technology and as an introduction to other parts of the <i>Quantities and units</i> series.</p><

60241,IS,Cor,ISO 80000-1:2009/Cor 1:2011,Quantities and units — Part 1: General — Technical Corrigendum 1,Grandeurs et unités — Partie 1: Généralités — Rectificatif technique 1,2011-09-22,1,['01.060'],ISO/TC 12,9599,,"[64972,76921]","['en','fr']",1,

31895,IS,,ISO 80000-10:2009,Quantities and units — Part 10: Atomic and nuclear physics,Grandeurs et unités — Partie 10: Physique atomique et nucléaire,2009-11-27,1,['01.060'],ISO/TC 12,9599,"[3650,28981,28982,3647]",[64980],"['en','fr']",67,"<p>ISO 80000-10:2009 gives the names, symbols, and definitions for quantities and units used in atomic and nuclear physics. Where appropriate, conversion factors are also given.</p>"

31896,IS,,ISO 80000-11:2008,Quantities and units — Part 11: Characteristic numbers,Grandeurs et unités — Partie 11: Nombres caractéristiques,2008-12-03,1,['01.060'],ISO/TC 12,9599,"[3655,28983]",[64982],"['en','fr']",9,"<p>ISO 80000-11:2008 gives the names, symbols and definitions for characteristic numbers used in the description of transport phenomena.</p>"

31897,IS,,ISO 80000-12:2009,Quantities and units — Part 12: Solid state physics,Grandeurs et unités — Partie 12: Physique de l'état solide,2009-05-13,1,['01.060'],ISO/TC 12,9599,"[28984,3657]",[63480],"['en','fr']",29,"<p>ISO 80000-12:2009 gives names, symbols and definitions for quantities and units of solid state physics. Where appropriate, conversion factors are also given.</p>"

31887,IS,,ISO 80000-2:2009,Quantities and units — Part 2: Mathematical signs and symbols to be used in the natural sciences and technology,Grandeurs et unités — Partie 2: Signes et symboles mathématiques à employer dans les sciences de la nature et dans la technique,2009-11-24,1,['01.060'],ISO/TC 12,9599,[3653],[64973],"['en','fr']",40,"<p>ISO 80000-2:2009 gives general information about mathematical signs and symbols, their meanings, verbal equivalents and applications.</p><p>The recommendations in ISO 80000-2:2009 are intended mainly for use in the natural sciences and technology, but also apply to other areas where mathematics is used.</p>"

31888,IS,,ISO 80000-3:2006,Quantities and units — Part 3: Space and time,Grandeurs et unités — Partie 3: Espace et temps,2006-03-17,1,['01.060'],ISO/TC 12,9599,"[28973,28974,3626,3623]",[64974],"['en','fr','ru']",19,"<p>ISO 80000-3:2006 gives names, symbols and definitions for quantities and units of space and time. Where appropriate, conversion factors are also given.</p>"

31889,IS,,ISO 80000-4:2006,Quantities and units — Part 4: Mechanics,Grandeurs et unités — Partie 4: Mécanique,2006-03-17,1,['01.060'],ISO/TC 12,9599,"[3629,28975]",[64975],"['en','fr','ru']",24,"<p>ISO 80000-4:2006 specifies the names, symbols and definitions for quantities and units of classical mechanics. Where appropriate, conversion factors are also given.</p>"

31890,IS,,ISO 80000-5:2007,Quantities and units — Part 5: Thermodynamics,Grandeurs et unités — Partie 5: Thermodynamique,2007-04-26,1,['01.060'],ISO/TC 12,9599,"[28976,3632]",[64976],"['en','fr','ru']",22,"<p>ISO 80000-5:2007 gives names, symbols and definitions for quantities and units of thermodynamics. Where appropriate, conversion factors are also given.</p>"

31892,IS,,ISO 80000-7:2008,Quantities and units — Part 7: Light,Grandeurs et unités — Partie 7: Lumière,2008-11-26,1,['01.060'],ISO/TC 12,9599,"[3638,28978]",[64977],"['en','fr']",44,"<p>ISO 80000-7:2008 gives names, symbols and definitions for quantities and units for light and other electromagnetic radiation. Where appropriate, conversion factors are also given.</p>"

40669,IS,,ISO 80000-8:2007,Quantities and units — Part 8: Acoustics,Grandeurs et unités — Partie 8: Acoustique,2007-06-01,1,['01.060'],ISO/TC 12,9599,"[28979,3641]",[64978],"['en','fr','ru']",13,"<p>ISO 80000-8:2007 gives names, symbols and definitions for quantities and units of acoustics. Where appropriate, conversion factors are also given.</p>"

31894,IS,,ISO 80000-9:2009,Quantities and units — Part 9: Physical chemistry and molecular physics,Grandeurs et unités — Partie 9: Chimie physique et physique moléculaire,2009-04-02,1,['01.060'],ISO/TC 12,9599,"[28980,3644]",[64979],"['en','fr']",37,"<p>ISO 80000-9:2009 gives names, symbols, and definitions for quantities and units of physical chemistry and molecular physics. Where appropriate, conversion factors are also given.</p>"

57093,IS,Amd,ISO 80000-9:2009/Amd 1:2011,Quantities and units — Part 9: Physical chemistry and molecular physics — Amendment 1,Grandeurs et unités — Partie 9: Chimie physique et physique moléculaire — Amendement 1,2011-05-17,1,['01.060'],ISO/TC 12,9599,,[64979],"['en','fr']",2,

15004,IS,,ISO 8005:1984,Carbonaceous materials used in the production of aluminium — Green and calcined coke — Determination of ash content,Produits carbonés utilisés pour la production de l'aluminium — Coke cru et coke calciné — Détermination du taux de cendres,1984-10-01,1,['71.100.10'],ISO/TC 226,9599,,[36723],"['en','fr']",2,"<p>A test portion of a dry, finely ground sample is heated in a tared platinum dish in a furnace at 700 degrees centigrade to constant mass. The residue is cooled and weighed.</p>"

15006,IS,,ISO 8007:1985,Carbonaceous materials used in the production of aluminium — Sampling from cathodic blocks and prebaked anodes — General,Produits carbonés utilisés pour la production de l'aluminium — Échantillonnage de blocs cathodiques et d'anodes précuites — Généralités,1985-10-31,1,['71.100.10'],ISO/TC 226,9599,,"[27568,27567]","['en','fr']",4,

15007,IS,,ISO 8008:1986,Aluminium oxide primarily used for the production of aluminium — Determination of specific surface area by nitrogen adsorption — Single-point method,Oxyde d'aluminium principalement utilisé pour la production de l'aluminium — Détermination de l'aire massique (surface spécifique) par adsorption d'azote — Méthode à un point de mesure,1986-08-21,1,['71.100.10'],ISO/TC 226,9599,,[39383],"['en','fr']",9,"<p>At ambient temperature and at atmospheric pressure nitrogen is introduced into two bottles of equal volume one of which contains the test portion while the other is empty. The connected bottles are immersed in the refrigerant bath of liquid nitrogen. Since some nitrogen

15008,IS,,ISO 8009-1:1997,"Reusable rubber contraceptive diaphragms — Part 1: Classification, sampling and requirements","Diaphragmes contraceptifs réutilisables en caoutchouc — Partie 1: Classification, échantillonnage et exigences",1997-04-10,1,['11.200'],ISO/TC 157,9599,,"[33409,37077]","['en','fr']",5,

15017,IS,,ISO 8009-10:1985,Reusable rubber contraceptive diaphragms — Part 10: Recommendations for storage,Diaphragmes contraceptifs réutilisables en caoutchouc — Partie 10: Recommandations pour le stockage,1985-09-12,1,['11.200'],ISO/TC 157,9599,,[37077],"['en','fr']",1,<p>Lays down recommendations on storage conditions to be considered by manufacturers and distributors.</p>

15009,IS,,ISO 8009-2:1985,Reusable rubber contraceptive diaphragms — Part 2: Determination of size,Diaphragmes contraceptifs réutilisables en caoutchouc — Partie 2: Détermination de la taille,1985-09-12,1,['11.200'],ISO/TC 157,9599,,[37077],"['en','fr']",1,<p>Includes a measuring method consisting in the measurement of the external diameter by a measuring device the scale of which is graduated in millimeters.</p>

37077,IS,,ISO 8009:2004,Mechanical contraceptives — Reusable natural and silicone rubber contraceptive diaphragms — Requirements and tests,Contraceptifs mécaniques — Diaphragmes contraceptifs réutilisables en caoutchouc — Performances et essais,2004-09-22,1,['11.200'],ISO/TC 157,9599,"[15016,15013,15010,27416,15014,15017,27417,15015,15008,15009]",[66173],['en'],26,"<p>ISO 8009:2004 specifies the minimum requirements and test methods to be used for reusable diaphragms made from natural rubber and silicone rubber. These diaphragms are intended for contraceptive use.</p><p>ISO 8009:2004 is not applicable to other vaginal contraceptive barriers, such as those known as cervical caps, vaginal spon

54520,IS,Amd,ISO 8009:2004/Amd 1:2012,Mechanical contraceptives — Reusable natural and silicone rubber contraceptive diaphragms — Requirements and tests — Amendment 1,Contraceptifs mécaniques — Diaphragmes contraceptifs réutilisables en caoutchouc — Performances et essais — Amendement 1,2012-02-13,1,['11.200'],ISO/TC 157,9599,,[66173],['en'],1,

15010,IS,,ISO 8009-3:1985,Reusable rubber contraceptive diaphragms — Part 3: Determination of dome thickness,Diaphragmes contraceptifs réutilisables en caoutchouc — Partie 3: Détermination de l'épaisseur du dôme,1985-09-12,1,['11.200'],ISO/TC 157,9599,,[37077],"['en','fr']",1,"<p>Gives a method for measurement by means of a specified dial gauge which is graduated in divisions of not more than 0,01 mm.</p>"

15011,IS,,ISO 8009-4:1985,Reusable rubber contraceptive diaphragms — Part 4: Freedom from visible defects,Diaphragmes contraceptifs réutilisables en caoutchouc — Partie 4: Absence de défauts visibles,1985-12-12,1,['11.200'],ISO/TC 157,9599,,[27416],"['en','fr']",3,

27416,IS,,ISO 8009-4:1996,Reusable rubber contraceptive diaphragms — Part 4: Freedom from visible defects,Diaphragmes contraceptifs réutilisables en caoutchouc — Partie 4: Absence de défauts visibles,1996-12-26,2,['11.200'],ISO/TC 157,9599,[15011],[37077],['en'],3,"<p>Specifies two alternative methods for determining visible defects in reusable rubber contraceptive diaphragms, the inspection over a lamp and inspection by inflation. The methods are of equal validity. Replaces the first edition.</p>"

15012,IS,,ISO 8009-5:1985,Reusable rubber contraceptive diaphragms — Part 5: Determination of tensile properties,Diaphragmes contraceptifs réutilisables en caoutchouc — Partie 5: Détermination des propriétés de résistance à la traction,1985-09-12,1,['11.200'],ISO/TC 157,9599,,[27417],"['en','fr']",2,

27417,IS,,ISO 8009-5:1996,Reusable rubber contraceptive diaphragms — Part 5: Determination of tensile properties,Diaphragmes contraceptifs réutilisables en caoutchouc — Partie 5: Détermination des propriétés de résistance à la traction,1996-12-26,2,['11.200'],ISO/TC 157,9599,[15012],[37077],['en'],2,<p>Describes a method for determining the tensile properties of the dome of reusable rubber contraceptive diaphragms. Replaces the first edition.</p>

15013,IS,,ISO 8009-6:1985,Reusable rubber contraceptive diaphragms — Part 6: Determination of deterioration after accelerated ageing,Diaphragmes contraceptifs réutilisables en caoutchouc — Partie 6: Détermination des détériorations après vieillissement accéléré,1985-09-12,1,['11.200'],ISO/TC 157,9599,,[37077],"['en','fr']",1,<p>Includes methods for determining the resistance to deterioration. Conditioning of the test pieces at an elevated temperature for a specified time. Examination of the test pieces followed by measuring of the tensile strength and elongation at break in accordance with ISO 8009-5.</p>

15014,IS,,ISO 8009-7:1985,Reusable rubber contraceptive diaphragms — Part 7: Determination of compression resistance of coil spring and flat spring diaphragms,Diaphragmes contraceptifs réutilisables en caoutchouc — Partie 7: Détermination de la résistance à la compression des diaphragmes à ressort à boudin et à ressort plat,1985-09-12,1,['11.200'],ISO/TC 157,9599,,[37077],"['en','fr']",2,<p>Specifies a measuring method. This method is not applicable to diaphragms with springs designed to form an arc when compressed. Compression of the article across its diameter with a mass of 280 g using a suitable apparatus. Determination of the change in diameter after 15 s.</p>

15015,IS,,ISO 8009-8:1985,Reusable rubber contraceptive diaphragms — Part 8: Determination of twisting during compression of coil spring and flat spring diaphragms,Diaphragmes contraceptifs réutilisables en caoutchouc — Partie 8: Détermination de la torsion en compression des diaphragmes à ressort à boudin et à ressort plat,1985-09-12,1,['11.200'],ISO/TC 157,9599,,[37077],"['en','fr']",2,<p>Specifies a measuring method. This method is not applicable to diaphragms with springs designed to form an arc when compressed. Compression of the rim of the article across its diameter using a suitable apparatus. Determination of the deviation of the rim from the horizontal plane.</p>

15016,IS,,ISO 8009-9:1985,Reusable rubber contraceptive diaphragms — Part 9: Packaging and labelling,Diaphragmes contraceptifs réutilisables en caoutchouc — Partie 9: Emballage et étiquetage,1985-09-12,1,['11.200'],ISO/TC 157,9599,,[37077],"['en','fr']",2,"<p>Gives requirements. Each article shall be individually packaged in a container designed to protect it from contamination and mechanical damage during normal handlung, transport and storage. Articles and containers shall be legibly marked with some important information.</p>"

5142,IS,,ISO 801-1:1979,Pulps — Determination of saleable mass in lots — Part 1: Pulp baled in sheet form,Pâtes — Détermination de la masse marchande des lots — Partie 1: Balles de pâte en feuilles,1979-10-01,1,['85.040'],ISO/TC 6,9599,,[5143],"['en','fr']",10,

5144,IS,,ISO 801-2:1979,Pulps — Determination of saleable mass in lots — Part 2: Pulps (such as flash-dried pulp) baled in slabs,Pâtes — Détermination de la masse marchande des lots — Partie 2: Balles de pâte en plaques (pâte séchée en flocons),1979-10-01,1,['85.040'],ISO/TC 6,9599,,[5145],"['en','fr']",11,

15021,IS,,ISO 8013:1988,"Rubber, vulcanized — Determination of creep in compression or shear",Caoutchouc vulcanisé — Détermination du fluage en compression ou en cisaillement,1988-11-10,1,['83.060'],ISO/TC 45/SC 2,9599,,[43676],"['en','fr']",11,<p>Specifies a method for the determination of creep in rubber continuously subject to compressive or to shear forces. The standard cannot be used for intermittent deformation of rubber.</p>

43676,IS,,ISO 8013:2006,"Rubber, vulcanized — Determination of creep in compression or shear",Caoutchouc vulcanisé — Détermination du fluage en compression ou en cisaillement,2006-10-04,2,['83.060'],ISO/TC 45/SC 2,9599,[15021],[55610],"['en','fr']",14,<p>ISO 8013:2006 specifies a method for the determination of creep in rubber continuously subjected to compressive or to shear forces. The standard cannot be used for intermittent deformation of rubber.</p>

55610,IS,,ISO 8013:2012,"Rubber, vulcanized — Determination of creep in compression or shear",Caoutchouc vulcanisé — Détermination du fluage en compression ou en cisaillement,2012-10-03,3,['83.060'],ISO/TC 45/SC 2,9599,[43676],[77426],"['en','fr']",18,<p>ISO 8013:2012 specifies a method for the determination of creep in vulcanized rubber continuously subjected to compressive or to shear forces. The standard cannot be used for intermittent deformation of rubber.</p>

15023,IS,,ISO 8015:1985,Technical drawings — Fundamental tolerancing principle,Dessins techniques — Principe de tolérancement de base,1985-12-18,1,['01.100.20'],ISO/TC 213,9599,,"[55979,29648]","['en','fr']",5,"<p>Specifies the principle of the relationship between dimensional tolerances and geometrical tolerances. It shall be applied to linear dimensions and their tolerances, angular dimensions and their tolerances and geometrical tolerances which define the following four aspects for each feature of the part: size form, orientation, and location. Refers to ISO 286/1, ISO 1101, and ISO 2692.</p>"

15025,IS,,ISO 8017:1985,"Mould guide pillars, straight and shouldered, and locating guide pillars, shouldered","Colonnes de guidage pour moules, droites et épaulées, et épaulées avec plot de centrage",1985-08-15,1,['25.120.30'],ISO/TC 29/SC 8,9599,,[44038],"['en','fr']",8,

15026,IS,,ISO 8018:1985,"Mould guide bushes, headed, and locating guide bushes, headed","Bagues de guidage pour moules, à collerette et à collerette avec plot de centrage",1985-08-01,1,['25.120.30'],ISO/TC 29/SC 8,9599,,[44037],"['en','fr']",4,

5147,IS,,ISO 802:1976,Aluminium oxide primarily used for the production of aluminium — Preparation and storage of test samples,Oxyde d'aluminium principalement utilisé pour la production de l'aluminium — Préparation et conservation des échantillons pour essai,1976-09-01,1,['71.100.10'],ISO/TC 226,9599,,"[76790,74352,36720]","['en','fr']",2,"<p>Specifies the preparation of laboratory samples, crude samples for the determination of certain geometric properties and physical and pysico-chemical tests including the determination of moisture content and dried samples. The principle consists in grinding and sieving of the sample until passing completely through a sieve of meshes having apertures of

15028,IS,,ISO 8020:1986,Punches with cylindrical head and reduced shank,Poinçons à tête cylindrique et à corps épaulé,1986-09-25,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[15029],"['en','fr']",6,

15029,IS,,ISO 8020:1992,Tools for pressing — Punches with cylindrical head and reduced shank,Outillages de presse — Poinçons à tête cylindrique et à corps épaulé,1992-01-30,2,['25.120.10'],ISO/TC 29/SC 8,9599,[15028],[32057],"['en','fr']",8,<p>Specifies the basic dimensions and tolerances for punches with shank diameters from 5 mm to 32 mm. Gives examples of materials and their hardness.</p>

15030,IS,,ISO 8021:1986,Round punches with cylindrical head and straight shank,Poinçons ronds à tête cylindrique et à corps droit,1986-09-04,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[32057],"['en','fr']",3,"<p>Lays down the basic dimensions and tolerances in millimetres for theses round punches in the diameter range 1 to 32 mm. Gives matrial and ahrdness as examples, and specifies the designation of punches. The main use of punches defined in ISO 8021 is for punching holes in steel sheet or in sheet of other materials.</p>"

15031,IS,,ISO 8022:1984,Surface active agents — Determination of wetting power by immersion,Agents de surface — Détermination du pouvoir mouillant par immersion,1984-11-01,1,['71.100.40'],ISO/TC 91,9599,,[15032],"['en','fr']",7,

15035,IS,,ISO 8026:1985,Irrigation equipment — Irrigation sprayers — General requirements and test methods,Matériel d'irrigation — Diffuseurs — Exigences générales et méthodes d'essai,1985-10-31,1,['65.060.35'],ISO/TC 23/SC 18,9599,,[15036],"['en','fr']",7,

15036,IS,,ISO 8026:1995,Agricultural irrigation equipment — Sprayers — General requirements and test methods,Matériel agricole d'irrigation — Diffuseurs — Exigences générales et méthodes d'essai,1995-04-13,2,['65.060.35'],ISO/TC 23/SC 18,9599,[15035],[41113],"['en','fr']",11,<p>Cancels and replaces the first edition (1985). Specifies the general requirements and test methods for irrigation sprayers. Applies to sprayers intended for assembly in pipeline networks for irrigation and for operation with irrigation water.</p>

26516,IS,Amd,ISO 8026:1995/Amd 1:2000,Agricultural irrigation equipment — Sprayers — General requirements and test methods — Amendment 1,Matériel agricole d'irrigation — Diffuseurs — Exigences générales et méthodes d'essai — Amendement 1,2000-06-08,2,['65.060.35'],ISO/TC 23/SC 18,9599,,[41113],"['en','fr']",2,

15038,IS,,ISO 8028:1987,Rubber and/or plastics hose assemblies for airless paint spraying — Specification,Tuyaux en caoutchouc et/ou en plastique pour pulvérisation 'AIRLESS' des peintures — Spécifications,1987-06-11,1,"['83.140.40','87.100']",ISO/TC 45/SC 1,9599,,[21872],"['en','fr']",3,

21872,IS,,ISO 8028:1999,Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification,Tuyaux et flexibles en caoutchouc et/ou en plastique pour pulvérisation 'AIRLESS' des peintures — Spécifications,1999-07-29,2,"['83.140.40','87.100']",ISO/TC 45/SC 1,9599,[15038],[68035],"['en','fr']",4,

68035,IS,,ISO 8028:2017,Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification,Tuyaux et flexibles en caoutchouc et/ou en plastique pour pulvérisation (AIRLESS) des peintures — Spécifications,2017-12-05,3,"['83.140.40','87.100']",ISO/TC 45/SC 1,9599,[21872],[86390],"['en','fr']",8,"<p>ISO 8028:2017 specifies the requirements for four types of hose and hose assemblies for use in airless paint spraying. The four types are differentiated by burst pressure and operating temperature, and can be constructed from rubber or plastic materials, or a combination of rubber and plastic material.</p>"

15039,IS,,ISO 8029:1985,"Plastics hose — General purpose collapsible water hose, textile reinforced — Specification",Tuyaux plastiques — Tuyaux d'eau écrasables d'usage général renforcés textiles — Spécifications,1985-05-24,1,['23.040.70'],ISO/TC 45/SC 1,9599,,[39357],"['en','fr']",2,"<p>Lays down the requirements for two types of textile reinforced thermoplastics collapsible water hoses for general applications to a maximum temperature of 55 °C. It is not a specification for products used for fire-fighting, agriculture or irrigation purposes. The two types of hose specified are type 1: low pressure; type 2: high pressure.</p>"