Withdrawn and superseded ISO standards — page 164 of 246

20838,IS,,ISO 7876-4:1994,Fuel injection equipment — Vocabulary — Part 4: High-pressure pipes and end-connections,Équipement d'injection de combustible — Vocabulaire — Partie 4: Tuyauteries et raccords haute pression,1994-10-20,1,"['43.060.40','01.040.43']",ISO/TC 22,9599,,[30503],"['en','fr']",6,<p>Establishes a vocabulary for high-pressure pipes and end-connections in fuel injection systems for diesel (compression-ignition) engines.</p>

34828,IS,,ISO 7876-5:2004,Fuel injection equipment — Vocabulary — Part 5: Common rail fuel injection system,Équipement d'injection de combustible — Vocabulaire — Partie 5: Système d'injection de combustible à rampe commune,2004-05-27,1,"['43.060.40','01.040.43']",ISO/TC 22/SC 34,9599,,[81182],"['en','fr']",7,<p>ISO 7876-5:2004 establishes a vocabulary for common rail (CR) fuel injection systems for diesel (compression-ignition) engines and their components. The terms defined in this part of ISO 7876 are unique to common rail fuel injection systems; terms and definitions relating to other types of fuel injection equipment are to be found in the other parts of ISO 7876.</p>

14819,IS,,ISO 7879:1983,Road vehicles — Cradle-mounted in-line fuel injection pumps — Mounting dimensions,Véhicules routiers — Pompes d'injection en ligne avec fixation par berceau — Dimensions de montage,1983-12-01,1,['43.060.40'],ISO/TC 22,9599,,[14820],"['en','fr']",3,

14820,IS,,ISO 7879:1990,Road vehicles — Cradle-mounted in-line fuel injection pumps — Mounting dimensions,Véhicules routiers — Pompes d'injection en ligne avec fixation par berceau — Dimensions de montage,1990-04-05,2,['43.060.40'],ISO/TC 22,9599,[14819],[26749],"['en','fr']",4,

5107,IS,,ISO 788:1974,Ultramarine pigments for paints,Pigments d'outremer pour peintures,1974-06-01,1,['87.060.10'],ISO/TC 256,9599,,"[74770,80022]","['en','fr']",2,"<p>Specifies the requirements and corresponding test methods for artificial ultramarine pigments, suitable for use in paints. Replaces ISO Recommendation R 788-1968.</p>"

14833,IS,,ISO 7885:1996,"Sterile, single-use dental injection needles","Aiguilles dentaires stériles pour injection, non réutilisables",1996-08-22,1,"['11.040.20','11.060.20']",ISO/TC 106/SC 4,9599,,[30575],"['en','fr']",5,

30575,IS,,ISO 7885:2000,Sterile dental injection needles for single use,"Aiguilles dentaires stériles pour injection, non réutilisables",2000-12-21,2,"['11.040.25','11.060.20']",ISO/TC 106/SC 4,9599,[14833],[45606],"['en','fr']",8,

14835,IS,,ISO 7886-1:1993,Sterile hypodermic syringes for single use — Part 1: Syringes for manual use,"Seringues hypodermiques stériles, non réutilisables — Partie 1: Seringues pour utilisation manuelle",1993-09-16,1,['11.040.25'],ISO/TC 84,9599,[14834],[64790],"['en','fr']",23,"<p>Specifies requirements (cleanliness, limits for acidity and alkalinity, limits for extractable metals, lubricant, tolerance on graduated capacity, graduated scale, barrel, piston/plunger assembly, nozzle, performance, packaging, labelling) for sterile single-use hypodermic syringes made of plastic materials and intended for the aspiration of fluids or for the injection of fluids immediately after filling. Exclude

26290,IS,Cor,ISO 7886-1:1993/Cor 1:1995,Sterile hypodermic syringes for single use — Part 1: Syringes for manual use — Technical Corrigendum 1,"Seringues hypodermiques stériles, non réutilisables — Partie 1: Seringues pour utilisation manuelle — Rectificatif technique 1",1995-10-26,1,['11.040.25'],ISO/TC 84,9599,,[64790],"['en','fr']",2,<p>Deletes and replaces the existing figure 1 by a new figure 1.</p>

14834,IS,,ISO 7886:1984,Sterile hypodermic syringes for single use,"Seringues hypodermiques stériles, non réutilisables",1984-09-01,1,['11.040.20'],ISO/TC 84,9599,,"[21017,14835]","['en','fr']",13,

21017,IS,,ISO 7886-2:1996,Sterile hypodermic syringes for single use — Part 2: Syringes for use with power-driven syringe pumps,"Seringues hypodermiques stériles, non réutilisables — Partie 2: Seringues pour pousse-seringues mus par un moteur",1996-05-09,1,['11.040.25'],ISO/TC 84,9599,[14834],[72444],"['en','fr']",14,"<p>Specifies requirements for sterile single-use hypodermic syringes of nominal capacity 5 ml and above, made of plastics materials and intended for use with power-driven syringe pumps. Does not apply to syringes for use with insulin, single-use syringes made of glass, syringes prefilled with the injection by the manufacturer and syringes supplied with the injection as a doctor

36742,IS,,ISO 7886-3:2005,Sterile hypodermic syringes for single use — Part 3: Auto-disable syringes for fixed-dose immunization,"Seringues hypodermiques stériles, non réutilisables — Partie 3: Seringues autobloquantes pour vaccination à dose fixe",2005-03-09,1,['11.040.25'],ISO/TC 84,9599,,[76605],"['en','fr','ru']",13,"<p>ISO 7886-3:2005 specifies the properties and performance of sterile single-use hypodermic syringes with or without needle, made of plastic materials and stainless steel and intended for the aspiration of vaccines or for the injection of vaccines immediately after filling. Upon delivering a fixed dose of vaccine the syringe is automatically rendered unusable.</p><p>ISO 788

38024,IS,,ISO 7886-4:2006,Sterile hypodermic syringes for single use — Part 4: Syringes with re-use prevention feature,"Seringues hypodermiques stériles, non réutilisables — Partie 4: Seringues avec dispositif empêchant la réutilisation",2006-09-22,1,['11.040.25'],ISO/TC 84,9599,,[70326],"['en','fr','ru']",12,"<p>ISO 7886-4:2006 specifies requirements for sterile single-use hypodermic syringes made of plastic materials with or without needle, and intended for the aspiration of fluids or for the injection of fluids immediately after filling and of design such that the syringe can be rendered unusable after use. </p><p>ISO 7886-4:2006 is not applicable to syringes made of glass (specified in I

14836,IS,,ISO 7887:1985,Water quality — Examination and determination of colour,Qualité de l'eau — Examen et détermination de la couleur,1985-02-14,1,['13.060.01'],ISO/TC 147/SC 2,9599,,[14837],"['en','fr']",7,

14837,IS,,ISO 7887:1994,Water quality — Examination and determination of colour,Qualité de l'eau — Examen et détermination de la couleur,1994-08-25,2,['13.060.60'],ISO/TC 147/SC 2,9599,[14836],[46425],"['en','fr']",8,"<p>Cancels and replaces the first edition (1985). Specifies three methods for the examination of colour: a method for the examination of apparent colour by visually observing a water sample in a bottle; a method for the determination of the true colour of a water sample using optical apparatus; a method for the determination of the colour by visual comparison with hexachloroplatinate standard solutions. Under certain circumstances, strongly coloured water samples need to be dil

31880,IS,,ISO 7889:2003,Yogurt — Enumeration of characteristic microorganisms — Colony-count technique at 37 degrees C,Yaourt — Dénombrement des micro-organismes caractéristiques — Technique de comptage des colonies à 37 degrés C,2003-01-13,1,"['67.100.99','07.100.30']",ISO/TC 34/SC 5,9599,,[81032],['en'],11,<p>ISO 7889|IDF 117:2003 specifies a method for the enumeration of characteristic microorganisms in yogurt by means of the colony-count technique at 37 degrees Celsius.</p><p>The method is applicable to yogurts in which both characteristic microorganisms (<i>Lactobacillus delbrueckii </i>subsp.<i> bulgaricus </i>and<i> Streptococcus thermophilus</i>) are present and viable.</p>

5109,IS,,ISO 789-1:1981,Agricultural tractors — Test procedures — Part 1: Power tests,Tracteurs agricoles — Méthodes d'essai — Partie 1: Essais de puissance,1981-07-01,1,['65.060.10'],ISO/TC 23/SC 2,9599,,[5110],"['en','fr']",13,

5110,IS,,ISO 789-1:1990,Agricultural tractors — Test procedures — Part 1: Power tests for power take-off,Tracteurs agricoles — Méthodes d'essai — Partie 1: Essais de puissance à la prise de force,1990-10-25,2,['65.060.10'],ISO/TC 23/SC 2,9599,"[5108,5109]",[66436],"['en','fr']",10,"<p>This part is the first of a series of eight. Specifies procedure for determining the power available at the power take-off, drawbar and belt pulley on tractors. Contains definitions and permissible measurement tolerances. Annex A includes a specimen test report. The measurement of tyre tread is given in annex B.</p>"

5123,IS,,ISO 789-10:1996,Agricultural tractors — Test procedures — Part 10: Hydraulic power at tractor/implement interface,Tracteurs agricoles — Méthodes d'essai — Partie 10: Puissance hydraulique disponible à la liaison tracteur/instrument,1996-02-15,1,['65.060.10'],ISO/TC 23/SC 2,9599,,[38372],"['en','fr']",7,<p>Describes the test procedure for determining the hydraulic pressures at the tractor/implement interface. Contains a companion test procedure for measuring the maximum hydraulic power available.</p>

5111,IS,,ISO 789-2:1983,Agricultural tractors — Test procedures — Part 2: Hydraulic power and lifting capacity,Tracteurs agricoles — Méthodes d'essai — Partie 2: Puissance hydraulique et capacité de relevage,1983-02-01,2,['65.060.10'],ISO/TC 23/SC 2,9599,,[5112],"['en','fr']",5,

5112,IS,,ISO 789-2:1993,Agricultural tractors — Test procedures — Part 2: Rear three-point linkage lifting capacity,Tracteurs agricoles — Méthodes d'essai — Partie 2: Capacité de relevage de l'attelage trois points arrière,1993-08-19,3,['65.060.10'],ISO/TC 23/SC 2,9599,[5111],"[39222,45941]","['en','fr']",6,"<p>Specifies test procedures for determining the lifting capacity of rear-mounted three-point linkage systems: a) the maximum vertical force which can be exerted by the hydraulic lift at the lower hitch points throughout their full range of movement; b) the maximum vertical force which can be exerted by the hydraulic lift, at a point 610 mm to the rear of the hitch points on a frame atta

5113,IS,,ISO 789-3:1982,Agricultural tractors — Test procedures — Part 3: Turning and clearance diameters,Tracteurs agricoles — Méthodes d'essai — Partie 3: Diamètres de braquage et de dégagement,1982-09-01,1,['65.060.10'],ISO/TC 23/SC 2,9599,,[5114],"['en','fr']",4,

5114,IS,,ISO 789-3:1993,Agricultural tractors — Test procedures — Part 3: Turning and clearance diameters,Tracteurs agricoles — Méthodes d'essai — Partie 3: Diamètres de braquage et de dégagement,1993-08-19,2,['65.060.10'],ISO/TC 23/SC 2,9599,[5113],[61678],"['en','fr']",7,<p>Specifies a method of determining the turning and clearance diameters of wheeled agricultural tractors. Applies to wheeled agricultural tractors having at least two axles fitted with pneumatic tyres.</p>

5115,IS,,ISO 789-4:1982,Agricultural tractors — Test procedures — Part 4: Measurement of exhaust smoke,Tracteurs agricoles — Méthodes d'essai — Partie 4: Mesurage de la fumée d'échappement,1982-10-01,1,['65.060.10'],ISO/TC 23/SC 2,9599,,[5116],"['en','fr']",7,

5118,IS,,ISO 789-6:1982,Agricultural tractors — Test procedures — Part 6: Centre of gravity,Tracteurs agricoles — Méthodes d'essai — Partie 6: Centre de gravité,1982-09-01,1,['65.060.10'],ISO/TC 23/SC 2,9599,,[71214],"['en','fr']",6,"<p>Specifies a simple, practical method, which requires the use of a weighbrindge and crane. Alternative methods may be used if they locate the centre of gravity with respekt to the specified reference planes and within the specified tolerances. The method is applicable to tractors having at least axles fitted with wheels or tracks. Three figures illustrate the determination in the different coordinates. An annex gives the specimen test report.</p>"

23577,IS,Amd,ISO 789-6:1982/Amd 1:1996,Agricultural tractors — Test procedures — Part 6: Centre of gravity — Amendment 1,Tracteurs agricoles — Méthodes d'essai — Partie 6: Centre de gravité — Amendement 1,1996-06-13,1,['65.060.10'],ISO/TC 23/SC 2,9599,,[71214],"['en','fr']",1,<p>Replaces subclause 6.3.1 and corrects the section entitled coordinates of the centre of gravity.</p>

5121,IS,,ISO 789-9:1990,Agricultural tractors — Test procedures — Part 9: Power tests for drawbar,Tracteurs agricoles — Méthodes d'essai — Partie 9: Essais de puissance à la barre d'attelage,1990-10-25,1,['65.060.10'],ISO/TC 23/SC 2,9599,,[44154],"['en','fr']",11,"<p>Specifies the test procedures for determining the power available at the drawbar on agricultural tractors of the wheeled, track-lying or semi-track-laying type. Gives terms and definitions. The normative annex A shows a specimen test report for drawbar.</p>"

5122,IS,Amd,ISO 789-9:1990/Amd 1:1993,Agricultural tractors — Test procedures — Part 9: Power tests for drawbar — Amendment 1,Tracteurs agricoles — Méthodes d'essai — Partie 9: Essais de puissance à la barre d'attelage — Amendement 1,1993-01-21,1,['65.060.10'],ISO/TC 23/SC 2,9599,,[44154],"['en','fr']",1,<p>Amends the first paragraph of subclause 6.3.</p>

14851,IS,,ISO 7899-1:1984,Water quality — Detection and enumeration of faecal streptococci — Part 1: Method by enrichment in a liquid medium,Qualité de l'eau — Recherche et dénombrement des streptocoques fécaux — Partie 1: Méthode par enrichissement en milieu liquide,1984-12-01,1,['07.100.20'],ISO/TC 147/SC 4,9599,,[14852],"['en','fr']",3,

14853,IS,,ISO 7899-2:1984,Water quality — Detection and enumeration of faecal streptococci — Part 2: Method by membrane filtration,Qualité de l'eau — Recherche et dénombrement des streptocoques fécaux — Partie 2: Méthode par filtration sur membrane,1984-12-01,1,['07.100.20'],ISO/TC 147/SC 4,9599,,[14854],"['en','fr']",4,

5125,IS,,ISO 790:1973,Withdrawal of ISO 790-1973,Annulation de l'ISO 790-1973,1973-09-01,1,['55.180.10'],ISO/TC 104,9599,,[12648],['en'],4,

14855,IS,,ISO 7900:1988,Zinc-coated steel wire for fencing,Fil en acier galvanisé pour clôtures,1988-11-24,1,"['91.090','77.140.65']",ISO/TC 17/SC 17,9599,,[39138],"['en','fr']",3,"<p>Specifies requirements for drawn steel wire zinc-coated by the hot-dip process, and intended for use in general-purpose wire fencing, barbed-wire fencing, field fencing and chain link fencing. The properties specified are not intended to cover wire removed from a fabricated product.</p>"

14857,IS,,ISO 7902-1:1998,Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 1: Calculation procedure,Paliers lisses hydrodynamiques radiaux fonctionnant en régime stabilisé — Paliers circulaires cylindriques — Partie 1: Méthode de calcul,1998-04-09,1,['21.100.10'],ISO/TC 123,9599,,[63679],"['en','fr']",29,

63679,IS,,ISO 7902-1:2013,Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 1: Calculation procedure,Paliers lisses hydrodynamiques radiaux fonctionnant en régime stabilisé — Paliers circulaires cylindriques — Partie 1: Méthode de calcul,2013-10-31,2,['21.100.10'],ISO/TC 123/SC 8,9599,[14857],[78987],['en'],32,"<p> ISO 7902-1:2013 specifies a calculation procedure for oil-lubricated hydrodynamic plain bearings, with complete separation of the shaft and bearing sliding surfaces by a film of lubricant, used for designing plain bearings that are reliable in operation. It deals with circular cylindrical bearings having angular spans, Ω, of 3

78987,IS,,ISO 7902-1:2020,Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 1: Calculation procedure,Paliers lisses hydrodynamiques radiaux fonctionnant en régime stabilisé — Paliers circulaires cylindriques — Partie 1: Méthode de calcul,2020-06-10,3,['21.100.10'],ISO/TC 123/SC 8,9599,[63679],[93204],['en'],32,"<p>This document specifies a calculation procedure for oil-lubricated hydrodynamic plain bearings, with complete separation of the shaft and bearing sliding surfaces by a film of lubricant, used for designing plain bearings that are reliable in operation.</p><p>It deals with circular cylindrical bearings having angular spans, <i>Ω

14858,IS,,ISO 7902-2:1998,Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 2: Functions used in the calculation procedure,Paliers lisses hydrodynamiques radiaux fonctionnant en régime stabilisé — Paliers circulaires cylindriques — Partie 2: Fonctions utilisées pour le calcul,1998-04-30,1,['21.100.10'],ISO/TC 123/SC 8,9599,,[77157],"['en','fr']",61,

14859,IS,,ISO 7902-3:1998,Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 3: Permissible operational parameters,Paliers lisses hydrodynamiques radiaux fonctionnant en régime stabilisé — Paliers circulaires cylindriques — Partie 3: Paramètres opérationnels admissibles,1998-07-02,1,['21.100.10'],ISO/TC 123/SC 8,9599,,[77158],"['en','fr']",8,

77158,IS,,ISO 7902-3:2020,Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 3: Permissible operational parameters,Paliers lisses hydrodynamiques radiaux fonctionnant en régime stabilisé — Paliers circulaires cylindriques — Partie 3: Paramètres opérationnels admissibles,2020-06-09,2,['21.100.10'],ISO/TC 123/SC 8,9599,[14859],[93203],['en'],9,"<p>This document specifies empirical permissible values for <i>h</i>_lim, <i>T</i>_lim and .</p><p>The empirical values stated can be modified for certain applications, for example if information supplied by the manufacturer is to be taken into account. The descriptions of the sym

14862,IS,,ISO 7904-1:1995,Plain bearings — Symbols — Part 1: Basic symbols,Paliers lisses — Symboles — Partie 1: Symboles de base,1995-01-19,1,['21.100.10'],ISO/TC 123/SC 6,9599,,[44207],"['en','fr']",6,"<p>Defines basic symbols for use in the field of plain bearings, additional signs are also defined for use as superscripts and subscripts. The system is founded on characters of the Latin and Greek alphabets, Arabic figures and other signs, e.g. points, commas, horizontal lines or asterisks. For the purpose of international applicability, all symbols have been derived from English words. The present classification may be used in calculations and technological and geometrical determinations a

14863,IS,,ISO 7904-2:1995,Plain bearings — Symbols — Part 2: Applications,Paliers lisses — Symboles — Partie 2: Applications,1995-01-19,1,['21.100.10'],ISO/TC 123/SC 6,9599,,[44208],"['en','fr']",6,"<p>Specifies practical applications of the general symbols laid down in ISO 7904-1 with regard to the calculations, design, manufacture and testing of plain bearings (in the Roman and Greek alphabetic order). The symbols which have been found necessary are combinations of basic characters and additional signs according to ISO 7904-1.</p>"

14864,IS,,ISO 7905-1:1995,Plain bearings — Bearing fatigue — Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication,Paliers lisses — Fatigue des paliers — Partie 1: Paliers dans les machines d'essai et dans les applications en lubrification hydrodynamique,1995-01-26,1,['21.100.10'],ISO/TC 123/SC 2,9599,,[80085],"['en','fr']",11,"<p>Describes a method of improving test result comparability by evaluating the stresses in the bearing layers leading to fatigue. A similar evaluation is required in practical applications. Because the stresses are the result of pressure build-up in the hydrodynamic film, it is essential to fully state the conditions of o

14865,IS,,ISO 7905-2:1995,Plain bearings — Bearing fatigue — Part 2: Test with a cylindrical specimen of a metallic bearing material,Paliers lisses — Fatigue des paliers — Partie 2: Essai d'éprouvettes cylindriques en matériau antifriction métallique,1995-01-26,1,['21.100.10'],ISO/TC 123/SC 2,9599,,[79177],"['en','fr']",3,"<p>Specifies a method for the determination of the endurance limit in fatigue of multilayer bearing materials alone (not attached to steel backing). The test specimens are described in detail, the method specified is based on carrying out a number of stress cycles (ultimate number is 5 × 10^7 cycles), the fatigue strength for finite life shall be recorded commencing at 10^

14866,IS,,ISO 7905-3:1995,Plain bearings — Bearing fatigue — Part 3: Test on plain strips of a metallic multilayer bearing material,Paliers lisses — Fatigue des paliers — Partie 3: Essai sur éprouvettes plates en matériau antifriction métallique multicouche,1995-01-26,1,['21.100.10'],ISO/TC 123/SC 2,9599,,[77385],"['en','fr']",4,"<p>Specifies a method for the determination of the endurance limit in fatigue of plain strips of multilayer bearing materials. Additionally, the method provides the opportunity of studying the influence on the strips of hydraulic pressure and variable temperature.</p>"

14867,IS,,ISO 7905-4:1995,Plain bearings — Bearing fatigue — Part 4: Tests on half-bearings of a metallic multilayer bearing material,Paliers lisses — Fatigue des paliers — Partie 4: Essais sur demi-coussinets en matériau antifriction métallique multicouche,1995-01-26,1,['21.100.10'],ISO/TC 123/SC 2,9599,,[78381],"['en','fr']",7,<p>Specifies a method for the determination of the endurance limit in fatigue of half-bearings of multilayer bearing materials. The principle of the method is clamping the specimens at one end and loading them at the other end by force or displacement applied radially. The load shall fluctuate from tension to compression.</p>

14874,IS,,ISO 7913:1985,Aerospace — Fasteners — Tolerances of form and position for bolts and screws,Aéronautique et espace — Éléments de fixation — Tolérances de forme et de position des vis,1985-10-10,1,['49.030.20'],ISO/TC 20/SC 4,9599,,[14875],"['en','fr','ru']",6,

14876,IS,,ISO 7914:1986,Forestry machinery — Portable chain saws — Minimum handle clearance and sizes,Machines forestières — Scies à chaîne portatives — Espaces libres minimaux et dimensions des poignées,1986-09-04,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[21786],"['en','fr']",3,

21786,IS,,ISO 7914:1994,Forestry machinery — Portable chain-saws — Minimum handle clearance and sizes,Machines forestières — Scies à chaîne portatives — Espaces libres minimaux et dimensions des poignées,1994-09-15,2,['65.060.80'],ISO/TC 23/SC 17,9599,[14876],[33588],"['en','fr']",5,<p>Lays down the dimensions of the front and rear handle clearance and the handle dimensions of chain saws in order to ensure safe comfortable operation. Some figures illustrate the meaning of the description. Tabulates the clearance dimensions including descriptions.</p>

33588,IS,,ISO 7914:2002,Forestry machinery — Portable chain-saws — Minimum handle clearance and sizes,Machines forestières — Scies à chaîne portatives — Dimensions minimales des poignées et des espaces libres autour des poignées,2002-10-03,3,['65.060.80'],ISO/TC 23/SC 17,9599,[21786],[83994],"['en','fr']",6,"<p>ISO 7914 specifies the minimum clearances and related dimensions for the front and rear handles of portable, hand-held chain-saws with combustion engines.</p>"

59212,IS,Amd,ISO 7914:2002/Amd 1:2012,Forestry machinery — Portable chain-saws — Minimum handle clearance and sizes — Amendment 1,Machines forestières — Scies à chaîne portatives — Dimensions minimales des poignées et des espaces libres autour des poignées — Amendement 1,2012-07-31,3,['65.060.80'],ISO/TC 23/SC 17,9599,,[83994],"['en','fr']",2,

14877,IS,,ISO 7915:1985,Forestry machinery — Portable chain saws — Handles — Determination of strength,Matériel forestier — Scies à chaînes portatives — Poignées — Détermination de la solidité,1985-10-17,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[14878],"['en','fr']",,

14878,IS,,ISO 7915:1991,Forestry machinery — Portable chain-saws — Determination of handle strength,Matériel forestier — Scies à chaîne portatives — Détermination de la solidité des poignées,1991-01-17,2,['65.060.80'],ISO/TC 23/SC 17,9599,[14877],[75686],"['en','fr']",2,"<p>Specifies a test method and strength requirements for the handles of portable hand-held internal combustion engine chain-saws for use primarily in forestry. This second edition cancels and replaces the first edition (ISO 7915:1985), of which table 1 has been technically revised. A test load duration is recommended.</p>"

14879,IS,,ISO 7916:1989,Forestry machinery — Portable brush-saws — Measurement of hand-transmitted vibration,Machines forestières — Débroussailleuses portatives — Mesurage des vibrations transmises aux mains,1989-11-16,1,"['65.060.80','13.160']",ISO/TC 23/SC 17,9599,,[35166],"['en','fr']",7,<p>Specifies general methods for data acquisition and processing concerning vibrations induced by combustion engine brush-saws. The methods are valid irrespective of how the brush-saw is operated during the test. Figurtes illustrate the meaning of the description. Annex A contains the frequency range and weighting filter. Annex B gives the bibliography.</p>

14880,IS,,ISO 7917:1987,Acoustics — Measurement at the operator's position of airborne noise emitted by brush saws,Acoustique — Mesurage au niveau de l'oreille de l'opérateur du bruit émis par les débroussailleuses,1987-12-17,1,"['65.060.80','17.140.20']",ISO/TC 43/SC 1,9599,,[35167],"['en','fr']",4,"<p>Specifies a method for measuring the A-weighted and octave-band sound pressure levels of noise emission of portable, hand-held saws for use primarily in forestry which are powered by internal combustion engines.</p>"

14881,IS,,ISO 7918:1985,Forestry machinery — Portable brush-saws — Circular saw-blade guard — Dimensions,Matériel forestier — Débroussailleuses portatives — Dispositif de protection de la lame de scie circulaire — Dimensions,1985-08-22,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[1824],"['en','fr']",3,

14882,IS,,ISO 7919-1:1986,Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation — Part 1: General guidelines,Vibrations mécaniques des machines non alternatives — Mesurages sur les arbres tournants et évaluation — Partie 1: Directives générales,1986-03-27,1,['17.160'],ISO/TC 108/SC 2,9599,,[14883],"['en','fr']",16,

14883,IS,,ISO 7919-1:1996,Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 1: General guidelines,Vibrations mécaniques des machines non alternatives — Mesurages sur les arbres tournants et critères d'évaluation — Partie 1: Directives générales,1996-07-25,2,['17.160'],ISO/TC 108/SC 2,9599,[14882],[63180],"['en','fr']",18,

14884,IS,,ISO 7919-2:1996,Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 2: Large land-based steam turbine generator sets,Vibrations mécaniques des machines non alternatives — Mesurages sur les arbres tournants et critères d'évaluation — Partie 2: Turbo-alternateurs installés sur fondation radier,1996-07-25,1,"['29.160.40','17.160']",ISO/TC 108/SC 2,9599,,"[28902,30180]","['en','fr']",5,

30180,IS,,ISO 7919-2:2001,"Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min","Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les arbres tournants — Partie 2: Turbines à vapeur et alternateurs installés sur fondation radier, excédant 50 MW avec des vitesses normales de fonctionnement de 1500 r/min, 1800 r/min, 3000 r/min et 3600 r/min",2001-11-29,2,"['17.160','29.160.40']",ISO/TC 108/SC 2,9599,[14884],[51098],"['en','fr']",10,

51098,IS,,ISO 7919-2:2009,"Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min","Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les arbres tournants — Partie 2: Turbines à vapeur et alternateurs pour applications terrestres, excédant 50 MW avec des vitesses normales de fonctionnement de 1 500 r/min, 1 800 r/min, 3 000 r/min et 3 600 r/min",2009-09-30,3,"['27.040','17.160','29.160.40']",ISO/TC 108/SC 2,9599,[30180],[70047],"['en','fr']",12,"<p>ISO 7919-2:2009 establish

14885,IS,,ISO 7919-3:1996,Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 3: Coupled industrial machines,Vibrations mécaniques des machines non alternatives — Mesurages sur les arbres tournants et critères d'évaluation — Partie 3: Machines industrielles couplées,1996-07-25,1,['17.160'],ISO/TC 108/SC 2,9599,,[50527],"['en','fr']",5,

45537,IS,Cor,ISO 7919-3:1996/Cor 1:2007,Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 3: Coupled industrial machines — Technical Corrigendum 1,Vibrations mécaniques des machines non alternatives — Mesurages sur les arbres tournants et critères d'évaluation — Partie 3: Machines industrielles couplées — Rectificatif technique 1,2007-01-18,1,['17.160'],ISO/TC 108/SC 2,9599,,[50527],['fr'],,

50527,IS,,ISO 7919-3:2009,Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines,Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les arbres tournants — Partie 3: Machines industrielles couplées,2009-01-29,2,['17.160'],ISO/TC 108/SC 2,9599,"[14885,45537]",[78311],['en'],7,"<p>ISO 7919-3:2008 gives guidelines for applying evaluation criteria of shaft vibration under normal operating conditions, measured at or close to the bearings of coupled industrial machines.</p>"

71198,IS,Amd,ISO 7919-3:2009/Amd 1:2017,Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines — Amendment 1,Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les arbres tournants — Partie 3: Machines industrielles couplées — Amendement 1,2017-07-31,2,['17.160'],ISO/TC 108/SC 2,9599,,[78311],['en'],4,

14886,IS,,ISO 7919-4:1996,Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 4: Gas turbine sets,Vibrations mécaniques des machines non alternatives — Mesurages sur les arbres tournants et critères d'évaluation — Partie 4: Turbines à gaz,1996-07-25,1,"['27.040','17.160']",ISO/TC 108/SC 2,9599,,[38977],"['en','fr']",5,

38977,IS,,ISO 7919-4:2009,Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 4: Gas turbine sets with fluid-film bearings,Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les arbres tournants — Partie 4: Turbines à gaz à paliers à film fluide,2009-09-30,2,"['27.040','17.160']",ISO/TC 108/SC 2,9599,[14886],[74450],"['en','fr']",14,"<p>ISO 7919-4:2009 establishes provisions for evaluating the severity of <i>in-situ</i>, broad-band shaft vibration measured radial (i.e. transverse) to the shaft axis at, or close to, the main bearings. These are in terms of</p><p>- vibration under normal steady-state operating condition

71199,IS,Amd,ISO 7919-4:2009/Amd 1:2017,Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 4: Gas turbine sets with fluid-film bearings — Amendment 1,Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les arbres tournants — Partie 4: Turbines à gaz à paliers à film fluide — Amendement 1,2017-08-08,2,"['27.040','17.160']",ISO/TC 108/SC 2,9599,,[74450],"['en','fr']",5,

1517,IS,,ISO 7919-5:1997,Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 5: Machine sets in hydraulic power generating and pumping plants,Vibrations mécaniques des machines non alternatives — Mesurages sur les arbres tournants et critères d'évaluation — Partie 5: Machines équipant les centrales hydroélectriques et les stations de pompage,1997-02-13,1,"['29.160.40','17.160']",ISO/TC 108/SC 2,9599,,[38390],"['en','fr']",12,"<p>Gives guidelines for applying shaft vibration evaluation criteria, under normal operating conditions, measured at or close to the bearings of machines or machine sets in hydraulic power generating and pu

38390,IS,,ISO 7919-5:2005,Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 5: Machine sets in hydraulic power generating and pumping plants,Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les arbres tournants — Partie 5: Machines équipant les centrales hydroélectriques et les stations de pompage,2005-04-22,2,"['17.160','29.160.40']",ISO/TC 108/SC 2,9599,[1517],[67919],"['en','fr']",16,"<p>ISO 7919-5:2005 gives guidelines for applying evaluation criteria for shaft vibration measured at, or close to, the bearings of machines or machine sets in hydraulic power generating and pumping plants under normal operating co

14892,IS,,ISO 7925:1985,Dried oregano (Origanum vulgare Linnaeus) — Whole or ground leaves — Specification,Origan séché (Origanum vulgare Linnaeus) — Feuilles entières ou en poudre — Spécifications,1985-10-03,1,['67.220.10'],ISO/TC 34/SC 7,9599,,[29207],"['en','fr']",3,

14893,IS,,ISO 7926:1991,Dehydrated tarragon (Artemisia dracunculus Linnaeus) — Specification,Estragon déshydraté (Artemisia dracunculus Linnaeus) — Spécifications,1991-11-21,1,['67.220.10'],ISO/TC 34/SC 7,9599,,[90582],"['en','fr']",7,<p>Specifies the requirements of dehydrated tarragon (methylchavicol type - called 'French tarragon') in the form of whole or cut leaves and powder. Does not apply to elemicin-sabinene-type tarragon (called 'Russian tarragon'). Annex A forms an integral part of this standard.</p>

14894,IS,,ISO 7927-1:1987,"Fennel seed, whole or ground (powdered) — Part 1: Bitter fennel seed (Foeniculum vulgare P. Miller var. vulgare) — Specification","Graines de fenouil, entières ou en poudre — Partie 1: Graines de fenouil amer (Foeniculum vulgare P. Miller var. vulgare) — Spécifications",1987-04-09,1,['67.220.10'],ISO/TC 34/SC 7,9599,,"[69735,82243]","['en','fr']",4,"<p>Specifies the requirements for this product, describes sampling, methods of test, packing and marking and includes, in the annex, recommendations relating to storage and transport conditions. The grading of whole fennel and chemical requirements for both whole and ground fennel are listed in three tables.</p>" 14896,

14896,IS,,ISO 7928-1:1991,Savory — Specification — Part 1: Winter savory (Satureja montana Linnaeus),Sarriette — Spécifications — Partie 1: Sarriette des montagnes (Satureja montana Linnaeus),1991-11-21,1,['67.220.10'],ISO/TC 34/SC 7,9599,,[90583],"['en','fr']",7,"<p>Specifies the requirements of summer savory in the form of sprigs, and whole or broken leaves. Does not apply to winter savory. Annexes A (recommendations to storage and transport conditions) and B are for information only.</p>"

14897,IS,,ISO 7928-2:1991,Savory — Specification — Part 2: Summer savory (Satureja hortensis Linnaeus),Sarriette — Spécifications — Partie 2: Sarriette des jardins (Satureja hortensis Linnaeus),1991-11-21,1,['67.220.10'],ISO/TC 34/SC 7,9599,,[90587],"['en','fr']",7,"<p>Specifies the requirements of winter savory in the form of sprigs, and whole or broken leaves. Does not apply to summer savory. Annexes A (recommendations to storage and transport conditions) and B are for information only.</p>"

14899,IS,,ISO 7930:1986,Wheelchairs — Type classification based on appearance characteristics,Fauteuils roulants — Classification par type fondée sur les caractéristiques d'aspect,1986-05-15,1,['11.180'],ISO/TC 173/SC 1,9599,,[21931],"['en','fr']",2,

14901,IS,,ISO 7932:1987,Microbiology — General guidance for enumeration of Bacillus cereus — Colony count technique at 30 degrees C,Microbiologie — Directives générales pour le dénombrement de Bacillus cereus — Méthode par comptage des colonies à 30 degrés C,1987-10-22,1,['07.100'],ISO/TC 34/SC 9,9599,,[14902],"['en','fr']",8,

14902,IS,,ISO 7932:1993,Microbiology — General guidance for the enumeration of Bacillus cereus — Colony-count technique at 30 degrees C,Microbiologie — Directives générales pour le dénombrement de Bacillus cereus — Méthode par comptage des colonies à 30 degrés C,1993-10-07,2,['07.100.01'],ISO/TC 34/SC 9,9599,[14901],[38219],"['en','fr']",9,"<p>The principle of the method specified is surface plating of a specified quantity of the test sample if the initial product is liquid, or of a specified quantity of an initial suspension in the case of other products, preparing other plates using decimal dilutions of the test sample, aerobic incubation of the plates at 30 °C, calculating the number of B

29473,IS,Cor,ISO 7932:1993/Cor 1:1997,Microbiology — General guidance for the enumeration of Bacillus cereus — Colony-count technique at 30 degrees C — Technical Corrigendum 1,Microbiologie — Directives générales pour le dénombrement de Bacillus cereus — Méthode par comptage des colonies à 30 degrés C — Rectificatif technique 1,1997-10-02,2,['07.100.01'],ISO/TC 34/SC 9,9599,,[38219],"['en','fr']",2,

14903,IS,,ISO 7933:1989,Hot environments — Analytical determination and interpretation of thermal stress using calculation of required sweat rate,Ambiances thermiques chaudes — Détermination analytique et interprétation de la contrainte thermique fondées sur le calcul de la sudation requise,1989-06-29,1,['13.180'],ISO/TC 159/SC 5,9599,,"[25586,37600]","['en','fr']",19,"<p>Describes a method of calculating the heat balances as well as the sweat rate that the human body should produce to maintain this balance in equilibrium. The various terms used show the influence of the different physical parameters. It does not predict the physiological response of individual subjects, but only considers s

37600,IS,,ISO 7933:2004,Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain,Ergonomie des ambiances thermiques — Détermination analytique et interprétation de la contrainte thermique fondées sur le calcul de l'astreinte thermique prévisible,2004-08-10,2,['13.180'],ISO/TC 159/SC 5,9599,[14903],"[67185,78240]","['en','fr']",34,"<p>ISO 7933:2004 specifies a method for the analytical evaluation and interpretation of the thermal stress experienced by a subject in a hot environment. It describes a method for predicting the sweat rate and the internal core temperature that the human body will develop in re

14905,IS,,ISO 7935:1992,Stationary source emissions — Determination of the mass concentration of sulfur dioxide — Performance characteristics of automated measuring methods,Émissions de sources fixes — Détermination de la concentration en masse de dioxyde de soufre — Caractéristiques de performance des méthodes de mesurage automatiques,1992-12-03,1,['13.040.40'],ISO/TC 146/SC 1,9599,,"[83052,29718]",['en'],11,"<p>Applies to extractive and non-extractive automated sulfur dioxide measuring methods. Specifies 4 main performance characteristics: detection limit, effect of interfering substances, response time, integral performance. Annex A describes determination of the main performance characte

14906,IS,,ISO 7936:1992,Hard coal — Determination and presentation of float and sink characteristics — General directions for apparatus and procedures,Houille — Détermination et présentation des caractéristiques de flottation et d'enfoncement — Principes directeurs relatifs à l'appareillage et aux modes opératoires,1992-04-16,1,['73.040'],ISO/TC 27/SC 1,9599,,[79648],['en'],19,"<p>Describes sampling, preliminary treatment, test procedure using relative density separation methods, presentation of results. A general procedure for a centrifugal float and sink test is given in Annex A. A typical procedure for treating and testing a sample of raw coal is described in Annex B. Some practical hints

14907,IS,,ISO 7937:1985,Microbiology — General guidance for enumeration of Clostridium perfringens — Colony-count technique,Microbiologie — Directives générales pour le dénombrement de Clostridium perfringens — Technique par comptage des colonies,1985-07-04,1,['07.100.01'],ISO/TC 34/SC 9,9599,,[14908],"['en','fr']",7,

14908,IS,,ISO 7937:1997,Microbiology of food and animal feeding stuffs — Horizontal method for enumeration of Clostridium perfringens — Colony-count technique,Microbiologie des aliments — Méthode horizontale pour le dénombrement de Clostridium perfringens — Technique par comptage des colonies,1997-04-17,2,['07.100.30'],ISO/TC 34/SC 9,9599,[14907],[36588],"['en','fr']",10,

36588,IS,,ISO 7937:2004,Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of Clostridium perfringens — Colony-count technique,Microbiologie des aliments — Méthode horizontale pour le dénombrement de Clostridium perfringens — Technique par comptage des colonies,2004-08-16,3,['07.100.30'],ISO/TC 34/SC 9,9599,[14908],"[71498,67049]","['en','fr']",16,"<p>ISO 7937:2004 describes a horizontal method for the enumeration of viable <i>Clostridium perfringens. </i>It is applicable to products intended for human consumption and the feeding of animals, and environmental samples in the area of food production and food handling.</p>"

14909,IS,,ISO 7938:1986,Aircraft — Ball bearings for control cable pulleys — Dimensions and loads,Aéronefs — Roulements à billes pour poulies de câbles de commande — Dimensions et charges,1986-02-06,1,['49.035'],ISO/TC 20,9599,,[28858],"['en','fr']",4,"<p>Specifies the requirements for sealed or shielded ball bearings for use in control cable pulleys conforming to ISO 7939 within the temperature range from -55 to +120 °C. Lays down materials, surface treatment, lubrication, designation and marking.</p>"

14914,IS,,ISO 7942:1985,Information processing systems — Computer graphics — Graphical Kernel System (GKS) functional description,Systèmes de traitement de l'information — Infographie — Système graphique de base (GKS) — Description fonctionnelle,1985-08-01,1,['35.140'],ISO/IEC JTC 1/SC 24,9599,,[14915],"['en','fr']",245,

14916,IS,Amd,ISO 7942:1985/Amd 1:1991,Information processing systems — Computer graphics — Graphical Kernel System (GKS) functional description — Amendment 1,Systèmes de traitement de l'information — Infographie — Système graphique de base (GKS) — Description fonctionnelle — Amendement 1,1991-02-28,1,['35.140'],ISO/IEC JTC 1/SC 24,9599,,[14915],['en'],33,

14921,IS,,ISO 7944:1984,Optics and optical instruments — Reference wavelengths,Optique et instruments d'optique — Longueurs d'onde de référence,1984-09-01,1,['17.180.01'],ISO/TC 172,9599,,[22574],"['en','fr']",2,

22574,IS,,ISO 7944:1998,Optics and optical instruments — Reference wavelengths,Optique et instruments d'optique — Longueurs d'onde de référence,1998-06-11,2,['17.180.01'],ISO/TC 172,9599,[14921],[85865],"['en','fr']",2,

54813,IS,Cor,ISO 7944:1998/Cor 1:2009,Optics and optical instruments — Reference wavelengths — Technical Corrigendum 1,Optique et instruments d'optique — Longueurs d'onde de référence — Rectificatif technique 1,2009-07-14,2,['17.180.01'],ISO/TC 172,9599,,[85865],['fr'],,

14931,IS,,ISO 7954:1987,Microbiology — General guidance for enumeration of yeasts and moulds — Colony count technique at 25 degrees C,Microbiologie — Directives générales pour le dénombrement des levures et moisissures — Technique par comptage des colonies à 25 degrés C,1987-10-15,1,['07.100.01'],ISO/TC 34/SC 9,9599,,"[38276,38275]","['en','fr']",3,"<p>The method consists in preparing of poured plates using a specified selective culture medium and a specified quantity of a test sample, further dilutions of the test sample. Then aerobic incubation of the plates at 25 degrees centigrade for 3, 4 or 5 days, followed by calculation of the number of yeasts and moulds per gram or per millilitre of

14938,IS,,ISO 7961:1994,Aerospace — Bolts — Test methods,Aéronautique et espace — Vis — Méthodes d'essai,1994-02-03,1,['49.030.20'],ISO/TC 20/SC 4,9599,,"[74757,33212]","['en','fr']",15,"<p>Specifies the following test methods: tensile test at ambient temperature, double shear test, tension fatigue test, stress durability test at ambient temperature, inspection for grinding burns, tensile test at elevated temperature, stress relaxation test at elevated temperature, stress corrosion test, stress rupture test at elevated temperature. Also describes test validity and test reports.</p>"

14939,IS,,ISO 7962:1987,Mechanical vibration and shock — Mechanical transmissibility of the human body in the z direction,Vibrations et chocs mécaniques — Transmissibilité mécanique du corps humain suivant la direction z,1987-08-20,1,['13.160'],ISO/TC 108/SC 4,9599,,[32917],"['en','fr']",6,"<p>Standardization is restricted to z-axis vibration for the standing and sitting postures. Currently there is only sufficient information for the head in the frequency range from 0,5 to 31,5 Hz for whole-body vibration entering the torso through the seat or feet.</p>"

14940,IS,,ISO 7963:1985,Welds in steel — Calibration block No. 2 for ultrasonic examination of welds,Soudures sur acier — Bloc d'étalonnage no 2 pour l'examen par ultrasons des soudures,1985-09-19,1,['25.160.40'],ISO/TC 44/SC 5,9599,,[37185],"['en','fr']",6,"<p>Lays down the dimensions, type of steel and directives for the use of block No. 2 for the calibration of ultrasonic equipment for the examination of welds in steel. Covers material, preparation and method of use.</p>"

37185,IS,,ISO 7963:2006,Non-destructive testing — Ultrasonic testing —- Specification for calibration block No. 2,Essais non destructifs — Contrôle par ultrasons — Spécifications relatives au bloc d'étalonnage n° 2,2006-09-18,2,['25.160.40'],ISO/TC 135/SC 3,9599,[14940],[82822],"['en','fr']",9,"<p>ISO7963:2005 specifies the dimensions, material, manufacture and methods of use for calibration block No. 2 for calibrating and checking ultrasonic testing equipment</p>"

14942,IS,,ISO 7965-1:1984,Packaging — Sacks — Drop test — Part 1: Paper sacks,Emballages — Sacs — Essai de chute — Partie 1: Sacs en papier,1984-12-01,1,['55.080'],ISO/TC 122,9599,,[81664],"['en','fr']",8,"<p>Principle: The filled sack is raised above a rigid plane surface and released to strike this surface after free fall, the atmospheric conditions, the height of drop and the position of the package being set in advance. Various kinds of dropping are described. Test methods with progressive and constant drop height and limit height are specified. Annexes show examples of apparatus for drop testing, identification of surfaces of sacks and example of format for a drop test report.</p>" 1494

14943,IS,,ISO 7966:1993,Acceptance control charts,Cartes de contrôle pour acceptation,1993-12-23,1,['03.120.30'],ISO/TC 69/SC 4,9599,,[40175],"['en','fr']",21,"<p>Gives guidance on the uses of acceptance control charts and establishes general procedures for determining sample sizes, action limits and decision criteria. Examples are included to illustrate a variety of circumstances in which this technique has advantages and to provide details of the determination of the sample size, the action limits and the decision criteria.</p>"

14944,IS,,ISO 7967-1:1987,Reciprocating internal combustion engines — Vocabulary of components and systems — Part 1: Structure and external covers,Moteurs alternatifs à combustion interne — Vocabulaire des composants et des systèmes — Partie 1: Structure du moteur et de ses capotages,1987-10-22,1,"['01.040.27','27.020']",ISO/TC 70,9599,,[40072],"['en','fr','ru']",12,"<p>Establishes a vocabulary in English, French and Russian with alphabetical indexes. The series consists of the parts 1 to 9. The terms and definitions are listed in a table which includes illustrations. In some illustrations the component is highlighted to aid identification. ISO 2710 gives a classification of engines and defi

58096,IS,,ISO 7967-10:2014,Reciprocating internal combustion engines — Vocabulary of components and systems — Part 10: Ignition systems,Moteurs alternatifs à combustion interne — Vocabulaire des composants et des systèmes — Partie 10: Systèmes d'allumage,2014-11-27,1,"['01.040.27','27.020']",ISO/TC 70,9599,,[81960],"['en','fr']",11,<p>ISO 7967-10:2014 establishes a vocabulary for ignition systems of reciprocating internal combustion engines.</p>

58097,IS,,ISO 7967-11:2014,Reciprocating internal combustion engines — Vocabulary of components and systems — Part 11: Fuel systems,Moteurs alternatifs à combustion interne — Vocabulaire des composants et des systèmes — Partie 11: Systèmes de carburant,2014-12-09,1,"['01.040.27','27.020']",ISO/TC 70,9599,,[81962],"['en','fr']",22,"<p>ISO 7967-11:2014 establishes a vocabulary for fuel systems of reciprocating internal combustion engines. Also, in ISO 7967-11:2014, the terms and the definitions are classified as follows:</p><p>? fuel supply system (3.1);</p><p>? carburetor (3.2);</p><p>? fuel injection system (3.3).</p><p>ISO 2710‑1 gives a classification of reciprocating internal combus