Withdrawn and superseded ISO standards — page 163 of 246

5066,IS,,ISO 780:1984,Packaging — Pictorial marking for handling of goods,Emballages — Symboles graphiques relatifs à la manutention des marchandises,1984-10-01,2,"['01.080.99','55.020']",ISO/TC 122,9599,,[5067],"['en','fr']",6,

5067,IS,,ISO 780:1985,Packaging — Pictorial marking for handling of goods,Emballages — Symboles graphiques relatifs à la manutention des marchandises,1985-09-05,3,['55.020'],ISO/TC 122,9599,"[5066,5273]",[20323],"['en','fr']",6,

20323,IS,,ISO 780:1997,Packaging — Pictorial marking for handling of goods,Emballages — Marquages graphiques relatifs à la manutention des marchandises,1997-10-30,4,"['01.080.99','55.020']",ISO/TC 122,9599,[5067],[59933],"['en','fr']",7,

14694,IS,,ISO 7800:1984,Metallic materials — Wire — Simple torsion test,Matériaux métalliques — Fils — Essai de torsion simple,1984-03-01,1,['77.040.10'],ISO/TC 164/SC 2,9599,"[5381,3949,7604]",[34653],"['en','fr']",2,"<p>Specifies the method for determining the ability of wire of diameter or thickness 0,3 to 10 mm inclusive to undergo plastic deformation during simple torsion. The test consists of twisting a test piece of wire around its own axis in one direction.</p>"

34653,IS,,ISO 7800:2003,Metallic materials — Wire — Simple torsion test,Matériaux métalliques — Fils — Essai de torsion simple,2003-08-25,2,['77.040.10'],ISO/TC 164/SC 2,9599,[14694],[54412],"['en','fr']",7,"<p>ISO 7800:2003 specifies a method for determining the ability of metallic wire of diameter or characteristic dimension 0,1 mm to 10 mm inclusive to undergo plastic deformation during simple torsion in one direction.</p>"

14695,IS,,ISO 7801:1984,Metallic materials — Wire — Reverse bend test,Matériaux métalliques — Fils — Essai de pliage alterné,1984-05-01,1,['77.040.10'],ISO/TC 164/SC 2,9599,"[7602,3971]",[83866],"['en','fr']",4,"<p>Specifies the method for determining the ability of wire of diameter or thickness 0,3 to 10 mm inclusive to undergo plastic deformation during reverse bending. The range of diameters of thicknesses for which ISO 7801 is applicable may be more exactly specified in the relevant product standard. The test consists of repeated bending, through 90 in opposite directions, of a test piece held at one end, each bend being over a cylindrical support of a specified radius.</p>"

14696,IS,,ISO 7802:1983,Metallic materials — Wire — Wrapping test,Matériaux métalliques — Fils — Essai d'enroulement,1983-10-01,1,['77.040.10'],ISO/TC 164/SC 2,9599,"[3972,4397,5382]",[63852],"['en','fr']",1,"<p>Specifies the method for determining the ability of wire of diameter or thickness 0,1 to 10 mm inclusive to undergo plastic deformation during wrapping. The test consists of winding a wire to a specified number of turns around a mandrel of the diameter specified in the relevant standard to form a closely wrapped helix. It may also include a specified sequence of windings and unwindings, or even rewindings.</p>"

14706,IS,,ISO 7809:1984,Information processing systems — Data communication — High-level data link control procedures — Consolidation of classes of procedures,Systèmes de traitement de l'information — Téléinformatique — Procédures de commande de liaison de données à haut niveau — Consolidation des classes de procédures,1984-02-01,1,['35.100.20'],ISO/IEC JTC 1/SC 6,9599,,[14707],"['en','fr']",15,

14710,IS,Amd,ISO 7809:1984/Amd 5:1992,Information processing systems — Data communication — High-level data link control procedures — Consolidation of classes of procedures — Amendment 5,Systèmes de traitement de l'information — Téléinformatique — Procédures de commande de liaison de données à haut niveau — Consolidation des classes de procédures — Amendement 5,1992-07-09,1,['35.100.20'],ISO/IEC JTC 1/SC 6,9599,,"[14713,14707]",['en'],7,

14711,IS,Amd,ISO 7809:1984/Amd 6:1992,Information processing systems — Data communication — High-level data link control procedures — Consolidation of classes of procedures — Amendment 6,Systèmes de traitement de l'information — Téléinformatique — Procédures de commande de liaison de données à haut niveau — Consolidation des classes de procédures — Amendement 6,1992-01-23,1,['35.100.20'],ISO/IEC JTC 1/SC 6,9599,,[14707],['en'],2,

14712,IS,Amd,ISO 7809:1984/Amd 7:1991,Information processing systems — Data communication — High-level data link control procedures — Consolidation of classes of procedures — Amendment 7,Systèmes de traitement de l'information — Téléinformatique — Procédures de commande de liaison de données à haut niveau — Consolidation des classes de procédures — Amendement 7,1991-09-19,1,['35.100.20'],ISO/IEC JTC 1/SC 6,9599,,[14707],['en'],1,

14714,IS,,ISO 7810:1985,Identification cards — Physical characteristics,Cartes d'identification — Caractéristiques physiques,1985-12-19,1,['35.240.40'],ISO/IEC JTC 1/SC 17,9599,"[7917,8957,8958]",[14715],"['en','fr']",3,

14716,IS,,ISO 7811-1:1985,Identification cards — Recording technique — Part 1: Embossing,Cartes d'identification — Technique d'enregistrement — Partie 1: Estampage,1985-12-19,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,"[7917,8957,8958]",[14717],"['en','fr']",24,

14718,IS,,ISO 7811-2:1985,Identification cards — Recording technique — Part 2: Magnetic stripe,Cartes d'identification — Technique d'enregistrement — Partie 2: Magnétique,1985-12-19,1,['35.240.40'],ISO/IEC JTC 1/SC 17,9599,"[7917,8957,8958]",[14719],"['en','fr']",8,

14720,IS,,ISO 7811-3:1985,Identification cards — Recording technique — Part 3: Location of embossed characters on ID-1 cards,Cartes d'identification — Technique d'enregistrement — Partie 3: Position des caractères estampés sur les cartes ID-1,1985-12-19,1,['35.240.40'],ISO/IEC JTC 1/SC 17,9599,"[7917,8957,8958]",[14721],"['en','fr']",8,

14722,IS,,ISO 7811-4:1985,Identification cards — Recording technique — Part 4: Location of read-only magnetic tracks — Tracks 1 and 2,"Cartes d'identification — Technique d'enregistrement — Partie 4: Position des pistes magnétiques pour lecture uniquement, pistes 1 et 2",1985-12-19,1,['35.240.40'],ISO/IEC JTC 1/SC 17,9599,"[7917,8957,8958]",[14723],['en'],2,

14724,IS,,ISO 7811-5:1985,Identification cards — Recording technique — Part 5: Location of read-write magnetic track — Track 3,"Cartes d'identification — Technique d'enregistrement — Partie 5: Position de la piste magnétique enregistrement-lecture, piste 3",1985-12-19,1,['35.240.40'],ISO/IEC JTC 1/SC 17,9599,"[7917,8957,8958]",[14725],"['en','fr']",2,

14726,IS,,ISO 7812:1985,Identification cards — Numbering system and registration procedure for issuer identifiers,Cartes d'identification — Système de numérotation et procédure d'enregistrement pour les identificateurs d'émetteur,1985-12-19,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[14727],"['en','fr']",7,

14727,IS,,ISO 7812:1987,Identification cards — Numbering system and registration procedure for issuer identifiers,Cartes d'identification — Système de numérotation et procédure d'enregistrement pour les identificateurs d'émetteur,1987-05-21,2,['35.240.40'],ISO/IEC JTC 1/SC 17,9599,[14726],"[20193,20194]",['en'],6,

14728,IS,Cor,ISO 7812:1987/Cor 1:1988,Identification cards — Numbering system and registration procedure for issuer identifiers — Technical Corrigendum 1,Cartes d'identification — Système de numérotation et procédure d'enregistrement pour les identificateurs d'émetteur — Rectificatif technique 1,1988-12-22,2,['35.240.40'],ISO/IEC JTC 1/SC 17,9599,,"[20193,20194]",['en'],1,

14729,IS,,ISO 7813:1987,Identification cards — Financial transaction cards,Cartes d'identification — Cartes de transactions financières,1987-05-21,2,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[14730],"['en','fr']",,

14732,IS,,ISO 7816-1:1987,Identification cards — Integrated circuit(s) cards with contacts — Part 1: Physical characteristics,Cartes d'identification — Cartes à circuit(s) intégré(s) à contacts — Partie 1: Caractéristiques physiques,1987-06-25,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[29257],"['en','fr']",4,

14733,IS,,ISO 7816-2:1988,Identification cards — Integrated circuit(s) cards with contacts — Part 2: Dimensions and location of the contacts,Cartes d'identification — Carte à circuit(s) intégrés à contacts — Partie 2: Dimensions et emplacements des contacts,1988-05-05,1,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,,[26536],"['en','fr']",7,

14742,IS,,ISO 7823-1:1987,"Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets","Plastiques — Plaques en poly(méthacrylate de méthyle) — Types, dimensions et caractéristiques — Partie 1: Plaques coulées",1987-04-02,1,['83.140.10'],ISO/TC 61/SC 11,9599,,[14743],"['en','fr']",5,

14743,IS,,ISO 7823-1:1991,"Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets","Plaques en poly(méthacrylate de méthyle) — Types, dimensions et caractéristiques — Partie 1: Plaques coulées",1991-11-14,2,['83.140.10'],ISO/TC 61/SC 11,9599,[14742],[28184],"['en','fr']",6,

28184,IS,,ISO 7823-1:1998,"Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets","Plastiques — Plaques en poly(méthacrylate de méthyle) — Types, dimensions et caractéristiques — Partie 1: Plaques coulées",1998-06-04,3,['83.140.10'],ISO/TC 61/SC 11,9599,[14743],[33450],"['en','fr']",8,

14744,IS,,ISO 7823-2:1989,"Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Melt-calendered extruded sheets","Plastiques — Plaques en poly(méthacrylate de méthyle) — Types, dimensions et caractéristiques — Partie 2: Plaques extrudées-calandrées",1989-01-26,1,['83.140.10'],ISO/TC 61/SC 11,9599,,[25205],['en'],6,

14745,IS,Cor,ISO 7823-2:1989/Cor 1:1991,"Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Melt-calendered extruded sheets — Technical Corrigendum 1","Plastiques — Plaques en poly(méthacrylate de méthyle) — Types, dimensions et caractéristiques — Partie 2: Plaques extrudées-calandrées — Rectificatif technique 1",1991-07-01,1,['83.140.10'],ISO/TC 61/SC 11,9599,,[25205],"['en','fr']",2,

25205,IS,,ISO 7823-2:1996,"Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Melt-calendered extruded sheets","Plastiques — Plaques en poly(méthacrylate de méthyle) — Types, dimensions et caractéristiques — Partie 2: Plaques extrudées-calandrées",1996-11-06,2,['83.140.10'],ISO/TC 61/SC 11,9599,"[14744,14745]",[28757],"['en','fr']",8,"<p>Specifies requirements for poly(methyl methacrylate) (PMMA) flat sheets, extruded and melt-calendered from colourless or colourwed, transparent, translucent or opaque grades of the polymers. Replaces the first edition.</p>"

33449,IS,,ISO 7823-3:2003,"Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 3: Continuous cast sheets","Plastiques — Plaques en poly(méthacrylate de méthyle) — Types, dimensions et caractéristiques — Partie 3: Plaques coulées continues",2003-07-07,1,['83.140.10'],ISO/TC 61/SC 11,9599,,[38964],"['en','fr']",8,"<p>ISO 7823-3:2003 specifies requirements for non-modified flat poly(methyl methacrylate) (PMMA) continuous cast sheets (plates) for general-purpose use. The sheets may be colourless or coloured, and may be transparent, translucent or opaque.</p><p>The thickness range of the sheets covered by this part of ISO 7823 is 1 mm to 10 mm.</p>"

38964,IS,,ISO 7823-3:2007,"Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 3: Continuous cast sheets","Plastiques — Plaques en poly(méthacrylate de méthyle) — Types, dimensions et caractéristiques — Partie 3: Plaques coulées continues",2007-05-07,2,['83.140.10'],ISO/TC 61/SC 11,9599,[33449],[82324],"['en','fr']",9,"<p>ISO 7823-3:2007 specifies requirements for non-modified flat poly(methyl methacrylate) (PMMA) continuous cast sheets for general-purpose use. The sheets may be colourless or coloured, and may be transparent, translucent or opaque.</p><p>The thickness range of the sheets covered by this part of ISO 7823 is 1 mm to 10 mm.</p>"

14747,IS,,ISO 7825:1985,Shipbuilding — Deck machinery — General requirements,Construction navale — Auxiliaires de pont — Prescriptions générales,1985-04-18,1,['47.020.50'],ISO/TC 8/SC 4,9599,,[67861],"['en','fr']",2,"<p>Specifies the characteristics common to all deck machinery of any type not detailed in the relevant specific International Standards. If in any items this Standard contradicts the specific International Standard, it shall be overruled by the specific International Standard.</p>"

14749,IS,,ISO 7827:1984,Water quality — Evaluation in an aqueous medium of the 'ultimate' aerobic biodegradability of organic compounds — Method by analysis of dissolved organic carbon (DOC),Qualité de l'eau — Évaluation en milieu aqueux de la biodégradabilité aérobie 'ultime' des composés organiques — Méthode par analyse du carbone organique dissous (COD),1984-10-01,1,['13.060.01'],ISO/TC 147/SC 5,9599,,[2219],"['en','fr']",5,

2219,IS,,ISO 7827:1994,Water quality — Evaluation in an aqueous medium of the 'ultimate' aerobic biodegradability of organic compounds — Method by analysis of dissolved organic carbon (DOC),Qualité de l'eau — Évaluation en milieu aqueux de la biodégradabilité aérobie 'ultime' des composés organiques — Méthode par analyse du carbone organique dissous (COD),1994-09-08,2,['13.060.70'],ISO/TC 147/SC 5,9599,[14749],[46248],"['en','fr']",7,"<p>The conditions described do not always correspond to the optimal conditions allowing the occurance of the maximum value of biodegradation. The procedure applies to substances which are soluble at the concentration used under the test conditions, non-volatile

14750,IS,,ISO 7828:1985,Water quality — Methods of biological sampling — Guidance on handnet sampling of aquatic benthic macro-invertebrates,Qualité de l'eau — Méthodes d'échantillonnage biologique — Guide pour le prélèvement des macro-invertébrés benthiques à l'épuisette,1985-02-14,1,['13.060.45'],ISO/TC 147/SC 5,9599,,"[46251,34810]","['en','fr']",6,"<p>Specifies equipment and procedures in shallow waters (down to a depth of about 1,5 m) which are accessible either by wading or from a bank or boat. The procedures are applicable to all accessible aquatic habitats in rivers, streams, poinds, estuaries and lake shores.</p>"

5072,IS,,ISO 783:1989,Metallic materials — Tensile testing at elevated temperature,Matériaux métalliques — Essai de traction à température élevée,1989-11-23,1,['77.040.10'],ISO/TC 164/SC 1,9599,[4071],[26858],"['en','fr']",21,

26858,IS,,ISO 783:1999,Metallic materials — Tensile testing at elevated temperature,Matériaux métalliques — Essai de traction à température élevée,1999-08-26,2,['77.040.10'],ISO/TC 164/SC 1,9599,[5072],[42610],"['en','fr']",28,

14752,IS,,ISO 7830:1983,Photography — Safety photographic films other than motion picture films — Material specifications,Photographie — Films photographiques de sécurité autres que les films cinématographiques — Spécifications des matériaux,1983-12-01,1,['37.040.20'],ISO/TC 42,9599,,[4621],"['en','fr']",3,

14754,IS,,ISO 7832:1987,Cinematography — Photoelectric output factor of photographic-type audio-level test films — Measurement and calibration,Cinématographie — Facteur de sortie photoélectrique des films d'essai de niveau sonore de type optique — Mesurage et étalonnage,1987-10-15,1,['37.060.20'],ISO/TC 36,9599,,[63975],"['en','fr']",6,"<p>Describes a method of measuring and calibrating the photoelectric output factor of single-channel photographic-type audio-level test films in all gauges by means of a calibrating sound reproducer. The specifications apply to both vaiable-area and variable-density sound records with a silver audio track. Calibrated audio-level test films are used for the pr

14756,IS,,ISO 7837:1983,Fertilizers — Determination of bulk density (loose) of fine-grained fertilizers,Engrais — Détermination de la masse volumique sans tassement des engrais fins,1983-11-01,1,['65.080'],ISO/TC 134,9599,,[14757],"['en','fr']",3,

14759,IS,,ISO 7839:1984,Textile machinery and accessories — Knitting machines — Classification and vocabulary,Matériel pour l'industrie textile — Machines à tricoter — Classification et vocabulaire,1984-04-01,1,"['59.120.40','01.040.59']",ISO/TC 72/SC 3,9599,,"[36237,26972]","['en','fr','ru']",15,"<p>Gives a classification and lists equivalent terms in English, French and Russian, for knitting machines used in the textile industry. Applicable to knitting machines in which fabric is formed by intermeshing the loops of yarn. Does not cover stitch forming machines used for reinforcement of basis fabrics, already present in a sheet-like form, by intermeshing loops or stitches.</p>"

14760,IS,,ISO 7840:1985,Small craft — Fire resistant fuel hoses,"Navires de plaisance — Tuyaux souples résistant au feu, pour carburant",1985-10-17,1,['47.080'],ISO/TC 188,9599,,[14761],"['en','fr']",4,

14761,IS,,ISO 7840:1994,Small craft — Fire-resistant fuel hoses,"Navires de plaisance — Tuyaux souples résistants au feu, pour carburant",1994-12-22,2,['47.080'],ISO/TC 188,9599,[14760],[35180],"['en','fr']",7,"<p>Cancels and replaces the first edition (1985). Specifies general requirements and physical tests for fire-resistant hoses for conveying petrol and diesel oil at low pressure, designed for a working pressure not exceeding 0,34 MPa for hoses with nominal bore up to and including 10 mm, and 0,25 MPa for hoses with a larger bore. Applies to hoses for small craft of up to 24 m length of hull with permanently installed inboard engines.</p>"

35180,IS,,ISO 7840:2004,Small craft — Fire-resistant fuel hoses,Petits navires — Tuyaux à carburant souples résistants au feu,2004-02-12,3,['47.080'],ISO/TC 188,9599,[14761],[59437],"['en','fr']",9,"<p>ISO 7840:2004 specifies general requirements and physical tests for fire-resistant hoses for conveying petrol and diesel oil, designed for a working pressure not exceeding 0,34 MPa for hoses with nominal bore up to and including 10 mm and 0,25 MPa for hoses with larger bore in craft of hull length up to 24 m.</p><p>ISO 7840:2004 applies to hoses for small craft with permanently installed fuel systems. It does not apply to hoses entirely within the splash well at the stern of the craft connecte

59437,IS,,ISO 7840:2013,Small craft — Fire-resistant fuel hoses,Petits navires — Tuyaux souples pour carburant résistants au feu,2013-07-17,4,['47.080'],ISO/TC 188,9599,[35180],[79097],"['en','fr']",10,"<p>ISO 7840:2013 specifies general requirements and physical tests for fire-resistant hoses for conveying petrol or petrol blended with ethanol and diesel fuel or diesel fuel blended with FAME, designed for a working pressure not exceeding 0,34 MPa for hoses with nominal bore up to and including 10 mm and 0,25 MPa for hoses up to 63 mm inner diameter in craft of hull length up to 24 m.</p><p>It applies to hoses for small craft with permanently installed fuel systems. It does not apply to hose

14762,IS,,ISO 7841:1988,Automatic steam traps — Determination of steam loss — Test methods,Purgeurs automatiques de vapeur d'eau — Détermination de la perte de vapeur — Méthodes d'essai,1988-12-01,1,['23.060.01'],ISO/TC 153,9599,,[81365],"['en','fr']",11,"<p>Specifies two test methods for steam traps. The object of these tests is to determine the amount of live steam, if any, that is lost through the steam trap. There is no measurement of the total heat energy lost by the trap. Such total heat loss would include radiation and convection components which can be established separately. Figure 1 shows the test arrangement for test method A, and figure 2 shows the test arrangement for test metho

14763,IS,,ISO 7842:1988,Automatic steam traps — Determination of discharge capacity — Test methods,Purgeurs automatiques de vapeur d'eau — Détermination du débit — Méthodes d'essai,1988-12-01,1,['23.060.01'],ISO/TC 153,9599,,[81365],"['en','fr']",11,

14769,IS,,ISO 7848:1986,Shank type milling cutters for indexable inserts — Designation,Fraises à queue à plaquettes amovibles — Désignation,1986-06-12,1,['25.100.20'],ISO/TC 29/SC 9,9599,,[27102],"['en','fr']",8,

14773,IS,,ISO 7851:1983,Fertilizers and soil conditioners — Classification,Matières fertilisantes — Classification,1983-10-01,1,['65.080'],ISO/TC 134,9599,,[77570],"['en','fr','ru']",8,<p>Establishes a classification system. It includes an explanation of the meaning of each heading and clearly assigns each material to an appropriate group.</p>

14776,IS,,ISO 7854:1984,Rubber- or plastics-coated fabrics — Determination of resistance to damage by flexing (dynamic method),Supports textiles revêtus de caoutchouc ou de plastique — Détermination de la résistance à la flexion (méthode dynamique),1984-12-01,1,['83.140'],ISO/TC 45,9599,,[14777],"['en','fr']",4,

14778,IS,,ISO 7855:1985,Torque wrenches — Test method,Clés dynamométriques — Méthode d'essai,1985-10-17,1,['25.140.30'],ISO/TC 29/SC 10,9599,,[13287],"['en','fr']",2,

14780,IS,,ISO 7857-1:1983,Intra-uterine devices — Part 1: Determination of breaking force,Dispositifs intra-utérins — Partie 1: Détermination de la force à la rupture,1983-12-01,1,['11.200'],ISO/TC 157,9599,,[26776],"['en','fr']",1,"<p>Specifies a measuring method consisting in stretching the article including the thread where provided, until breakage of article or thread occurs. Measuring of the force required to cause breakage.</p>"

14782,IS,,ISO 7857-3:1983,Intra-uterine devices — Part 3: Packaging and labelling,Dispositifs intra-utérins — Partie 3: Emballage et étiquetage,1983-11-01,1,['11.200'],ISO/TC 157,9599,,[26774],"['en','fr']",2,<p>Specifies requirements. The article and insertion instruments shall be either packaged individually or in multiple packages containing up to 100 articles and which may also contain an appropriate number of insertion instruments.</p>

14783,IS,,ISO 7858-1:1985,Measurement of water flow in closed conduits — Meters for cold potable water — Combination meters — Part 1: Specifications,Mesurage de débit d'eau dans les conduites fermées — Compteurs d'eau potable froide — Compteurs combinés — Partie 1: Spécifications,1985-07-25,1,['91.140.60'],ISO/TC 30,9599,,[20465],"['en','fr']",3,

20465,IS,,ISO 7858-1:1998,Measurement of water flow in closed conduits — Combination meters for cold potable water — Part 1: Specifications,Mesurage de débit d'eau dans les conduites fermées — Compteurs combinés d'eau potable froide — Partie 1: Spécifications,1998-07-16,2,['91.140.60'],ISO/TC 30/SC 7,9599,[14783],[36682],"['en','fr']",5,

14784,IS,,ISO 7858-2:1987,Measurement of water flow in closed conduits — Meters for cold potable water — Combination meters — Part 2: Installation requirements,Mesurage de débit d'eau dans les conduites fermées — Compteurs d'eau potable froide — Compteurs combinés — Partie 2: Conditions d'installation,1987-10-15,1,['91.140.60'],ISO/TC 30,9599,,[31133],"['en','fr']",3,

31133,IS,,ISO 7858-2:2000,Measurement of water flow in closed conduits — Combination meters for cold potable water — Part 2: Installation requirements,Mesurage de débit d'eau dans les conduites fermées — Compteurs combinés d'eau potable froide — Partie 2: Conditions d'installation,2000-10-26,2,['91.140.60'],ISO/TC 30/SC 7,9599,[14784],[36683],"['en','fr']",4,

14785,IS,,ISO 7858-3:1992,Measurement of water flow in closed conduits — Meters for cold potable water — Combination meters — Part 3: Test methods,Mesurage du débit d'eau dans les conduites fermées — Compteurs d'eau potable froide — Compteurs combinés — Partie 3: Méthodes d'essai,1992-12-30,1,['91.140.60'],ISO/TC 30/SC 7,9599,,[36684],"['en','fr']",6,"<p>The tests are related with determination of measurement errors, change-over flow rates, pressure, pressure loss, and accelerated wear. Also gives examples of test programmes.</p>"

14787,IS,,ISO 7860:1983,Road vehicles — Motorcycles — Method of measuring fuel consumption,Véhicules routiers — Motocycles — Méthode de mesurage de la consommation de carburant,1983-12-01,1,['43.140'],ISO/TC 22,9599,,[20174],"['en','fr']",17,

20174,IS,,ISO 7860:1995,Motorcycles — Methods of measuring fuel consumption,Motocycles — Méthodes de mesure de la consommation de carburant,1995-09-21,2,['43.140'],ISO/TC 22,9599,[14787],"[43295,43296,43294]","['en','fr']",20,<p>Specifies methods of determining the fuel consumption of motorcycles. Cancels and replaces the first edition which has been technically revised.</p>

14789,IS,,ISO 7862:1992,Passenger cars — Sled test procedure for evaluating adult restraint systems in simulated frontal collisions,Voitures particulières — Procédure d'essai sur chariot servant à l'évaluation des systèmes de retenue pour adultes lors de collisions frontales simulées,1992-01-30,1,['43.040.80'],ISO/TC 22,9599,,[31904],"['en','fr']",9,"<p>Specifies a method for dynamic testing. Gives definitions. Describes the test equipment, preparation for test and the test conditions.</p>"

14791,IS,,ISO 7864:1984,Sterile hypodermic needles for single use,"Aiguilles hypodermiques stériles, non réutilisables",1984-08-01,1,['11.040.20'],ISO/TC 84,9599,,"[14792,14793]","['en','fr']",7,

14792,IS,,ISO 7864:1988,Sterile hypodermic needles for single use,"Aiguilles hypodermiques stériles, non réutilisables",1988-08-18,2,['11.040.20'],ISO/TC 84,9599,[14791],[14793],"['en','fr']",7,

14793,IS,,ISO 7864:1993,Sterile hypodermic needles for single use,"Aiguilles hypodermiques stériles, non réutilisables",1993-05-06,3,['11.040.25'],ISO/TC 84,9599,"[14792,14791]",[60481],"['en','fr']",11,"<p>Specifies the following requirements for needles of nominal outside diameters 0,3 mm and 1,2 mm: nomenclature for components, cleanliness, limits for acidity and alkalinity, size designation, colour coding, needle hub, sheath, needle tube, needle point, performance, packaging, labelling, storage container, transport wrapping.</p>"

14795,IS,,ISO 7866:1999,"Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing","Bouteilles à gaz — Bouteilles sans soudure en alliage d'aluminium destinées à être rechargées — Conception, construction et essais",1999-07-01,1,['23.020.35'],ISO/TC 58/SC 3,9599,,[37438],"['en','fr']",41,

14796,IS,,ISO 7867-1:1988,Tyres and rims (metric series) for agricultural tractors and machines — Part 1: Tyre designation and dimensions,Pneumatiques et jantes (séries millimétriques) pour tracteurs et machines agricoles — Partie 1: Désignation et cotes des pneumatiques,1988-07-21,1,['83.160.30'],ISO/TC 31/SC 5,9599,,[14797],"['en','fr']",5,

14797,IS,,ISO 7867-1:1992,"Tyres and rims (metric series) for agricultural tractors and machines — Part 1: Tyre designation, dimensions and marking","Pneumatiques et jantes (série millimétrique) pour tracteurs et machines agricoles — Partie 1: Désignation, cotes et marquage des pneumatiques",1992-05-07,2,['83.160.30'],ISO/TC 31/SC 5,9599,[14796],[2729],"['en','fr']",7,

2729,IS,,ISO 7867-1:1996,"Tyres and rims (metric series) for agricultural tractors and machines — Part 1: Tyre designation, dimensions, marking and tyre/rim coordination","Pneumatiques et jantes (séries millimétriques) pour tracteurs et machines agricoles — Partie 1: Désignation, cotes et marquage des pneumatiques, coordination pneumatiques/jantes",1996-04-25,3,['83.160.30'],ISO/TC 31/SC 5,9599,[14797],[39039],"['en','fr']",10,"<p>Establishes the size designation, the dimensional calculation and the markings of the metric series of tyres for use on agricultural tractors and machines. Replaces the second edition.</p>"

39039,IS,,ISO 7867-1:2005,"Tyres and rims (metric series) for agricultural tractors and machines — Part 1: Tyre designation, dimensions and marking, and tyre/rim coordination","Pneumatiques et jantes (série millimétrique) pour tracteurs et machines agricoles — Partie 1: Désignation, cotes et marquage des pneumatiques, coordination pneumatiques/jantes",2005-06-24,4,['83.160.30'],ISO/TC 31/SC 5,9599,[2729],[63459],"['en','fr']",18,"<p>ISO 7867-1:2005 establishes the size designation, the dimensional calculation and the markings of the metric series of tyres primarily intended for use on agricultural tractors and machines. Tyre and rim coordination is also given.</p><p>ISO 7867-1:2005 applies t

14798,IS,,ISO 7867-2:1996,Tyres and rims (metric series) for agricultural tractors and machines — Part 2: Service description and load ratings,Pneumatiques et jantes (séries millimétriques) pour tracteurs et machines agricoles — Partie 2: 'Description d'utilisation' et capacités de charge,1996-04-25,1,['83.160.30'],ISO/TC 31/SC 5,9599,,[39040],"['en','fr']",8,<p>Establishes the service description and the tyre load ratings in basic and special applications for the metric series of tyres for agricultural tractors and machines.</p>

27766,IS,Cor,ISO 7867-2:1996/Cor 1:1996,Tyres and rims (metric series) for agricultural tractors and machines — Part 2: Service description and load ratings — Technical Corrigendum 1,Pneumatiques et jantes (séries millimétriques) pour tracteurs et machines agricoles — Partie 2: 'Description d'utilisation' et capacités de charge — Rectificatif technique 1,1996-09-12,1,['83.160.30'],ISO/TC 31/SC 5,9599,,[39040],"['en','fr']",2,"<p>Contains additions for table 2, corrects table A.4 and replaces the existing table A.5.</p>"

39040,IS,,ISO 7867-2:2005,Tyres and rims (metric series) for agricultural tractors and machines — Part 2: Service description and load ratings,Pneumatiques et jantes (série millimétrique) pour tracteurs et machines agricoles — Partie 2: Description d'utilisation et capacités de charge,2005-07-04,2,['83.160.30'],ISO/TC 31/SC 5,9599,"[14798,27766]",[63460],"['en','fr']",13,"<p>ISO 7867-2:2005 establishes the service description, the tyre load ratings in basic and special applications, and reference inflation pressure increments for the metric series of tyres primarily intended for agricultural tractors and machines.</p><p>It applies to bias-belted, diagonal and radial tyres mounted on 5° taper

46505,IS,Amd,ISO 7867-2:2005/Amd 1:2010,Tyres and rims (metric series) for agricultural tractors and machines — Part 2: Service description and load ratings — Amendment 1: .,Pneumatiques et jantes (série millimétrique) pour tracteurs et machines agricoles — Partie 2: Description d'utilisation et capacités de charge — Amendement 1: .,2010-04-28,2,['83.160.30'],ISO/TC 31/SC 5,9599,,[63460],"['en','fr']",9,

5085,IS,,ISO 787-10:1981,General methods of test for pigments and extenders — Part 10: Determination of density — Pyknometer method,Méthodes générales d'essai des pigments et matières de charge — Partie 10: Détermination de la masse volumique — Méthode utilisant un pycnomètre,1981-11-01,1,"['87.060.30','87.060.10']",ISO/TC 256,9599,,[5086],"['en','fr']",5,

5089,IS,,ISO 787-13:1973,"General methods of test for pigments — Part 13: Determination of water-soluble sulphates, chlorides and nitrates","Méthodes générales d'essais des pigments — Partie 13: Détermination des sulfates, chlorures et nitrates solubles dans l'eau",1973-11-01,1,['87.060.10'],ISO/TC 256,9599,,[36061],"['en','fr']",8,"<p>La treizième partie de cette Norme Internationale spécifie une méthode générale d'essai pour la détermination des sulfates, chlorures, et nitrates des pigments solubles dans l'eau. <br/> <br/>NOTE - Chaque fois que cette méthode générale est applicable pour un pigment donné, il devra simplement y être fait référence dans la Norme Internationale relative à ce

36061,IS,,ISO 787-13:2002,"General methods of test for pigments and extenders — Part 13: Determination of water-soluble sulfates, chlorides and nitrates","Méthodes générales d'essai des pigments et matières de charge — Partie 13: Détermination des sulfates, chlorures et nitrates solubles dans l'eau",2002-08-01,2,['87.060.10'],ISO/TC 256,9599,[5089],[74767],"['en','fr']",4,"<p>This part of ISO 787 specifies a general method of test for determining the water-soluble sulfates, chlorides and nitrates of pigments.</p>"

5091,IS,,ISO 787-14:1973,General methods of test for pigments — Part 14: Determination of resistivity of aqueous extract,Méthodes générales d'essais des pigments — Partie 14: Détermination de la résistivité de l'extrait aqueux,1973-11-01,1,['87.060.10'],ISO/TC 256,9599,,[36103],"['en','fr']",8,

36103,IS,,ISO 787-14:2002,General methods of test for pigments and extenders — Part 14: Determination of resistivity of aqueous extract,Méthodes générales d'essai des pigments et matières de charge — Partie 14: Détermination de la résistivité de l'extrait aqueux,2002-07-25,2,['87.060.10'],ISO/TC 256,9599,[5091],[74766],"['en','fr']",4,"<p>This part of ISO 787 specifies a general method of test for determining the resistivity (specific resistance) of the aqueous extract of a pigment. The method is applicable to all pigments and extenders, except pigments that are substantially soluble in water.</p>"

5093,IS,,ISO 787-15:1986,General methods of test for pigments and extenders — Part 15: Comparison of resistance to light of coloured pigments of similar types,Méthodes générales d'essai des pigments et matières de charge — Partie 15: Comparaison de la résistance à la lumière des pigments colorés de types semblables,1986-11-06,1,['87.060.10'],ISO/TC 256,9599,,[74768],"['en','fr']",5,"<p>Describes two methods of exposure. In method A, the material is exposed under glass to natural light. In method B, the material is exposed to direct artificial light. The test sample and the agreed reference pigment are each dispersed in the same agreed binder. The dispersions are applied to a substrate and dr

5095,IS,,ISO 787-17:1973,General methods of test for pigments — Part 17: Comparison of lightening power of white pigments,Méthodes générales d'essais des pigments — Partie 17: Comparaison du pouvoir éclaircissant des pigments blancs,1973-11-01,1,['87.060.10'],ISO/TC 256,9599,,[36104],"['en','fr']",8,

36104,IS,,ISO 787-17:2002,General methods of test for pigments and extenders — Part 17: Comparison of lightening power of white pigments,Méthodes générales d'essai des pigments et matières de charge — Partie 17: Comparaison du pouvoir éclaircissant des pigments blancs,2002-07-18,2,['87.060.10'],ISO/TC 256,9599,[5095],[74769],"['en','fr']",5,"<p>This part of ISO 787 specifies a general method of test for comparing the lightening (reducing) power of a white pigment with the lightening power of an agreed sample of the same type.</p><p>Two procedures (A and B) are described. Procedure A is quicker than procedure B and is suitable for testing one sample of pigment; procedure B is better for testi

5098,IS,,ISO 787-19:1974,General methods of test for pigments — Part 19: Determination of water-soluble nitrates (Salicylic acid method),Méthodes générales d'essais des pigments — Partie 19: Détermination des nitrates solubles dans l'eau (Méthode à l'acide salicylique),1974-05-01,1,['87.060.10'],ISO/TC 256,9599,,[79812],"['en','fr']",2,<p>This document specifies a spectrophotometric method. The principle of the method consists in that the nitrate present in the extract of the sample is used to nitrate salicylic acid in sulphuric acid medium. The nitro-compound formed is of an intense yellow colour in alkaline solution and the colour is measured spectrophotometrically at a wavelength of 410 n

5078,IS,,ISO 787-2:1981,General methods of test for pigments and extenders — Part 2: Determination of matter volatile at 105 degrees C,Méthodes générales d'essai des pigments et matières de charge — Partie 2: Détermination des matières volatiles à 105 degrés C,1981-09-01,1,['87.060.10'],ISO/TC 256,9599,,[79809],"['en','fr']",2,"<p>Specifies a method of test for determining the matter volatile at a temperature of 105 °C in a sample. The procedure is only applicable to materials that are stable at 105 °C. For materials that are unstable at this temperature, the test conditions should be agreed between the interested parties. - Replaces ISO/R 787/2:1968.</p>"

5099,IS,,ISO 787-20:1975,General methods of test for pigments — Part 20: Comparison of ease of dispersion (Oscillatory shaking method),Méthodes générales d'essais des pigments — Partie 20: Comparaison de la facilité de dispersion (Méthode par mouvements oscillatoires),1975-03-01,1,['87.060.10'],ISO/TC 256,9599,,[16196],"['en','fr']",5,

5103,IS,,ISO 787-24:1982,General methods of test for pigments and extenders — Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments — Photometric method,Méthodes générales d'essai des pigments et matières de charge — Partie 24: Détermination du pouvoir colorant relatif des pigments colorés et du pouvoir diffusant relatif des pigments blancs — Méthode photométrique,1982-12-01,1,['87.060.10'],ISO/TC 256,9599,,[5104],['en'],11,

5105,IS,,ISO 787-25:1993,"General methods of test for pigments and extenders — Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments — Colorimetric method","Méthodes générales d'essai des pigments et matières de charge — Partie 25: Comparaison, dans les systèmes monopigmentaires, de la couleur des pigments blancs, noirs et colorés — Méthode colorimétrique",1993-10-14,1,['87.060.10'],ISO/TC 256,9599,,[73918],"['en','fr']",6,"<p>The principle of the method specified is dispersing the test pigment and an agreed reference pigment in a particular test medium (mixture of an alkyd resin and fumed silica), preparing specimens on suitable substrates from the

5079,IS,,ISO 787-3:1979,General methods of test for pigments and extenders — Part 3: Determination of matter soluble in water — Hot extraction method,Méthodes générales d'essai des pigments et des matières de charge — Partie 3: Détermination des matières solubles dans l'eau — Méthode par extraction à chaud,1979-09-01,1,['87.060.10'],ISO/TC 256,9599,,[29655],"['en','fr']",2,

5081,IS,,ISO 787-5:1980,General methods of test for pigments and extenders — Part 5: Determination of oil absorption value,Méthodes générales d'essai des pigments et matières de charge — Partie 5: Détermination de la prise d'huile,1980-03-01,1,['87.060.10'],ISO/TC 256,9599,,[88158],"['en','fr']",2,"<p>The oil absorption value is required to be compared with the value determined at the same time on an agreed sample of the product. The principle of the method is based on addition of linseed oil from a burette to the test portion. After each addition, rub the oil into the product until conglomerates are formed. Cease the addition of oil when a paste of smooth consistency has been formed. It sho

5082,IS,,ISO 787-7:1981,General methods of test for pigments and extenders — Part 7: Determination of residue on sieve — Water method — Manual procedure,Méthodes générales d'essai des pigments et matières de charge — Partie 7: Détermination du refus sur tamis — Méthode à l'eau — Méthode manuelle,1981-10-01,1,['87.060.10'],ISO/TC 256,9599,,"[20338,38754]","['en','fr']",3,"<p>The principle of the method consists in weighing of a test portion and dispersing in a suitable volume of water. The dispersion is poured through a sieve. Washing of the test portion until the washings passing through the sieve are clear and free of dispersed material. Treatment of the residue on the sieve with water and

5083,IS,,ISO 787-8:1979,General methods of test for pigments and extenders — Part 8: Determination of matter soluble in water — Cold extraction method,Méthodes générales d'essai des pigments et des matières de charge — Partie 8: Détermination des matières solubles dans l'eau — Méthode par extraction à froid,1979-09-01,1,['87.060.10'],ISO/TC 256,9599,,[29656],"['en','fr']",2,

5084,IS,,ISO 787-9:1981,General methods of test for pigments and extenders — Part 9: Determination of pH value of an aqueous suspension,Méthodes générales d'essai des pigments et matières de charge — Partie 9: Détermination du pH d'une suspension aqueuse,1981-09-01,1,['87.060.10'],ISO/TC 256,9599,,[74765],"['en','fr']",2,"<p>The water used shall be freshly distilled water, boiled before use, but for 5 to 10 min only, in order to avoid an increase of its pH value due to alkali dissolved from the glass. Preparation of a suspension of the material under test, stopper the container, shaking, allow to stand any time, removing the stopper and determination, to the nearest 0.1 unit, of the pH value

40146,IS,,ISO 7870-1:2007,Control charts — Part 1: General guidelines,Cartes de contrôle — Partie 1: Lignes directrices générales,2007-09-19,1,['03.120.30'],ISO/TC 69/SC 4,9599,[14803],[62649],"['en','fr','ru']",15,"<p>ISO 7870-1:2007 presents key elements and philosophy of the control chart approach, and identifies a wide variety of control charts (including those related to the Shewhart control chart and those stressing process acceptance or on-line process adjustment).</p><p>ISO 7870-1:2007 presents an overview of the basic principles and concepts and illustrates the relationship among various control chart approaches to aid in the selection of the most appropriate standard for given cir

62649,IS,,ISO 7870-1:2014,Control charts — Part 1: General guidelines,Cartes de contrôle — Partie 1: Lignes directrices générales,2014-01-22,2,['03.120.30'],ISO/TC 69/SC 4,9599,[40146],[69639],"['en','fr']",16,"<p>ISO 7870-1:2014 presents key elements and philosophy of the control chart approach, and identifies a wide variety of control charts (including those related to the Shewhart control chart, those stressing process acceptance or online process adjustment, and specialized control charts).</p><p>It presents an overview of the basic principles and concepts and illustrates the relationship among various control chart approaches to aid in the selection of the most appropriate standard for

14803,IS,,ISO 7870:1993,Control charts — General guide and introduction,Cartes de contrôle — Principes généraux et introduction à l'emploi,1993-12-23,1,['03.120.30'],ISO/TC 69/SC 4,9599,,[40146],"['en','fr']",9,"<p>Presents key elements and philosophy of the control chart approach, and identifies a wide variety of control charts, including those related to the Shewhart control chart, the acceptance control chart and the adaptive control chart. Presents an overview of the basic principles and concepts and illustrates the relationship among various control chart approaches to aid in the selection of the most appropriate standard for given circumstances. Does not specify statistical control met

40174,IS,,ISO 7870-2:2013,Control charts — Part 2: Shewhart control charts,Cartes de contrôle — Partie 2: Cartes de contrôle de Shewhart,2013-03-25,1,['03.120.30'],ISO/TC 69/SC 4,9599,"[22211,15366]",[78859],['en'],44,"<p>ISO 7870-2:2013 establishes a guide to the use and understanding of the Shewhart control chart approach to the methods for statistical control of a process.</p><p>ISO 7870-2:2013 is limited to the treatment of statistical process control methods using only the Shewhart system of charts. Some supplementary material that is consistent with the Shewhart approach, such as the use of warning limits, analysis of trend patterns and process capability is briefly introduced. There a

40175,IS,,ISO 7870-3:2012,Control charts — Part 3: Acceptance control charts,Cartes de contrôle — Partie 3: Cartes de contrôle pour acceptation,2012-02-22,1,['03.120.30'],ISO/TC 69/SC 4,9599,[14943],[80092],['en'],20,"<p>ISO 7870-3:2012 gives guidance on the uses of acceptance control charts and establishes general procedures for determining sample sizes, action limits and decision criteria. This chart should be used only when: a) the within subgroup variation is in-control and the variation is estimated efficiently; b) a high level of process capability has been achieved.</p><p>This chart is typically used when the process variable under study is normally distributed, however, it can be app

40176,IS,,ISO 7870-4:2011,Control charts — Part 4: Cumulative sum charts,Cartes de contrôle — Partie 4: Cartes de contrôle de l'ajustement de processus,2011-06-29,1,['03.120.30'],ISO/TC 69/SC 4,9599,[14804],[74101],['en'],63,"<p>ISO 7870-4:2011 provides statistical procedures for setting up cumulative sum (cusum) schemes for process and quality control using variables (measured) and attribute data. It describes general-purpose methods of decision-making using cumulative sum (cusum) techniques for monitoring, control and retrospective analysis.</p>"

40173,IS,,ISO 7870-6:2016,Control charts — Part 6: EWMA control charts,Cartes de contrôle — Partie 6: Cartes de contrôle de EWMA,2016-02-15,1,['03.120.30'],ISO/TC 69/SC 4,9599,,[83852],"['en','fr']",26,"<p>ISO 7870-6:2016 covers EWMA control charts as a statistical process control technique to detect small shifts in the process mean. It makes possible the faster detection of small to moderate shifts in the process average. In this chart, the process average is evaluated in terms of exponentially weighted moving average of all prior sample means. EWMA weights samples in geometrically decreasing order so that the most recent samples are weighted most highly while the most distant samples contr

14808,IS,,ISO 7875-1:1984,Water quality — Determination of surfactants — Part 1: Determination of anionic surfactants by the methylene blue spectrometric method,Qualité de l'eau — Dosage des agents de surface — Partie 1: Dosage des agents de surface anioniques par la méthode spectrométrique au bleu de méthylène,1984-11-01,1,['13.060.01'],ISO/TC 147/SC 2,9599,,[24784],"['en','fr']",6,

14810,IS,,ISO 7876-1:1984,Fuel injection equipment — Vocabulary — Part 1: Fuel injection pumps,Équipement d'injection de combustible — Vocabulaire — Partie 1: Pompes d'injection de combustible,1984-10-01,1,"['43.060.40','01.040.43']",ISO/TC 22,9599,,[14811],"['en','fr']",12,