Withdrawn and superseded ISO standards — page 161 of 246

14473,IS,,ISO 7654:1983,Compression ignition engines — Spin-on fuel filters — Mounting and connecting dimensions,Moteurs à combustion interne à allumage par compression — Filtres à combustible vissés — Dimensions de montage et de raccordement,1983-10-01,1,['43.060.40'],ISO/TC 22,9599,,[14474],"['en','fr']",3,

14474,IS,,ISO 7654:1991,Road vehicles — Spin-on fuel filters for compression-ignition engines — Mounting and connecting dimensions,Véhicules routiers — Filtres à combustible vissés pour moteurs à combustion interne à allumage par compression — Dimensions de montage et de raccordement,1991-10-31,2,['43.060.40'],ISO/TC 22,9599,[14473],[28565],"['en','fr']",6,

14476,IS,,ISO 7657:1984,Pipework — Stripwound flexible metal hoses — Specifications and temperature-related requirements for use,Tuyauterie — Tuyaux métalliques flexibles agrafés — Spécifications et conditions d'emploi en température,1984-07-01,1,['23.040.70'],ISO/TC 5/SC 11,9599,,[22837],"['en','fr']",3,

22837,IS,,ISO 7657:1995,Pipework — General requirements for stripwound flexible metal hoses,Tuyauteries — Exigences générales pour tuyaux métalliques flexibles agrafés,1995-01-26,2,['23.040.70'],ISO/TC 5/SC 11,9599,[14476],[27752],"['en','fr']",3,"<p>Defines the conditions (materials, performance characteristics, temperature-related requirements) to be met for the flexible metal hoses, without coating (as defined in ISO 7369:1983, 4.1.10). The metal hoses defined are manufactured from helically wound preformed strip, generally with a right-hand lead where the turns, with or without packing, are connected together by single or double overlapping. Flexibility is achieved by adjacent turns slid

14477,IS,,ISO 7658:1984,Pipework — Stripwound flexible metal hoses — Testing and verification of characteristics,Tuyauterie — Tuyaux métalliques flexibles agrafés — Essais et vérifications des caractéristiques,1984-07-01,1,['23.040.70'],ISO/TC 5/SC 11,9599,,[27752],"['en','fr']",4,"<p>Specifies test methods necessary to check characteristics of hoses as defined in the specific product standards for each hose type. It also specifies complementary tests, the results of which can be essential to purpose users.</p>"

5045,IS,,ISO 766:1972,Fibre building boards — Determination of dimensions of test pieces,Panneaux de fibres — Détermination des dimensions des éprouvettes,1972-09-01,1,['79.060.20'],ISO/TC 89,9599,,[17125],"['en','fr']",2,

14480,IS,,ISO 7661:1984,Aerospace — Fluid systems — Clamp blocks for tube lines having axial alignment — Design standard and qualification testing — Metric series,Aéronautique et espace — Systèmes de fluides — Peignes supports de tuyauteries à alignement axial — Conception et essais de qualification — Série métrique,1984-12-01,1,['49.080'],ISO/TC 20/SC 10,9599,,[82076],"['en','fr']",8,"<p>Gives definitions for these clamps with or without electrical grounding, designed for a range of tube outside diameters from 4 to 32 mm selected from ISO 2964, and lays down the dimensions of clamp blocks and specifies the test methods for qualification testing. Furthermore gives classification and temperat

14482,IS,,ISO 7663:1985,"Rubber, halogenated isobutene-isoprene (BIIR and CIIR) — Test recipe and evaluation of vulcanization characteristics",Caoutchouc isobutène-isoprène halogéné (BIIR et CIIR) — Formule d'essai et évaluation des caractéristiques de vulcanisation,1985-06-27,1,['83.060'],ISO/TC 45/SC 3,9599,,[14483],['en'],2,

14483,IS,,ISO 7663:1994,"Rubber, halogenated isobutene-isoprene (BIIR and CIIR) — Evaluation procedure",Caoutchoucs isobutène-isoprène halogénés (BIIR et CIIR) — Méthode d'évaluation,1994-08-25,2,['83.060'],ISO/TC 45/SC 3,9599,[14482],[21889],"['en','fr']",3,

21889,IS,,ISO 7663:1995,Halogenated isobutene-isoprene rubber (BIIR and CIIR) — Evaluation procedures,Caoutchoucs isobutène-isoprène halogénés (BIIR et CIIR) — Méthodes d'évaluation,1995-10-05,3,['83.060'],ISO/TC 45/SC 3,9599,[14483],[35178],"['en','fr']",5,"<p>Defines physical and chemical tests on raw rubbers as well as standard materials, standard test formulation, equipment and methods for evaluating the vulcanization characteristics of halogeneted isobutene-isoprene rubbers. Replaces the second edition, which has been revised to include an additional mixing procedure.</p>"

35178,IS,,ISO 7663:2005,Halogenated isobutene-isoprene rubber (BIIR and CIIR) — Evaluation procedures,Caoutchoucs isobutène-isoprène halogénés (BIIR et CIIR) — Méthodes d'évaluation,2005-12-01,4,['83.060'],ISO/TC 45/SC 3,9599,[21889],[65598],['en'],9,"<p>ISO 7663:2005 specifies:</p><ul><li>physical and chemical tests on raw rubbers;</li><li>standardized materials, a standardized test formulation, and the equipment and processing methods for evaluating the vulcanization characteristics of all types of halogenated isobutene-isoprene rubber (BIIR and CIIR).</li></ul>"

14487,IS,,ISO 7668:1986,"Anodized aluminium and aluminium alloys — Measurement of specular reflectance and specular gloss at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees","Aluminium et alliages d'aluminium anodisés — Mesurage des caractéristiques de réflectance et de brillant spéculaires à angle fixe de 20 degrés, 45 degrés, 60 degrés ou 85 degrés",1986-10-23,1,['25.220.20'],ISO/TC 79/SC 2,9599,,"[51493,20551]","['en','fr']",10,"<p>ISO 7668 constitutes a revision in parts of ISO 2767:1973. The measurement is intended mainly for use with clear anodized surfaces. It can be used with colour-anodized aluminium, but then only for similar colours.</p>"

51493,IS,,ISO 7668:2010,"Anodizing of aluminium and its alloys — Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees","Anodisation de l'aluminium et de ses alliages — Mesurage des caractéristiques de réflectivité et de brillant spéculaires des couches anodiques à angle fixe de 20 degrés, 45 degrés, 60 degrés ou 85 degrés",2010-10-19,2,['25.220.20'],ISO/TC 79/SC 2,9599,[14487],[72810],"['en','fr']",13,"<p>ISO 7668:2010 specifies methods for the measurement of specular reflectance and specular gloss of flat samples of anodized aluminium using geometries of 20° (Method A), 45° (Method B), 60° (Method C

72810,IS,,ISO 7668:2018,"Anodizing of aluminium and its alloys — Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees","Anodisation de l'aluminium et de ses alliages — Mesurage des caractéristiques de réflectivité et de brillant spéculaires des couches anodiques à angle fixe de 20 degrés, 45 degrés, 60 degrés ou 85 degrés",2018-02-13,3,['25.220.20'],ISO/TC 79/SC 2,9599,[51493],[82009],"['en','fr']",13,"<p>ISO 7668:2018 specifies methods for the measurement of specular reflectance and specular gloss of flat samples of anodized aluminium using geometries of 20° (Method A), 45° (Method B), 60° (Method C

5046,IS,,ISO 767:1975,Fibre building boards — Determination of moisture content,Panneaux de fibres — Détermination de l'humidité,1975-01-01,1,['79.060.20'],ISO/TC 89,9599,,[17126],"['en','fr']",1,

14490,IS,,ISO 7671:1991,Polypropylene (PP) pipes and fittings (jointed by means of elastomeric sealing rings) for soil and waste discharge (low and high temperature) systems inside buildings — Specifications,Tubes et raccords en polypropylène (PP) (à jonction par bagues d'étanchéité en élastomère) pour les systèmes d'évacuation d'eaux usées et d'eaux-vannes (à basse et à haute température) à l'intérieur des bâtiments — Spécifications,1991-05-30,1,"['91.140.80','83.140.30']",ISO/TC 138/SC 1,9599,,[33704],"['en','fr']",15,

14494,IS,,ISO 7675:1991,Chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications,Tubes et raccords en poly(chlorure de vinyle) chloré (PVC-C) pour les systèmes d'évacuation d'eaux usées et d'eaux-vannes (à basse et à haute température) à l'intérieur des bâtiments — Spécifications,1991-05-16,1,"['91.140.80','83.140.30']",ISO/TC 138/SC 1,9599,,"[31877,26235]","['en','fr']",19,

14501,IS,,ISO 7682:1991,Acrylonitrile/butadiene/styrene (ABS) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications,Tubes et raccords en acrylonitrile/butadiène/styrène (ABS) pour les systèmes d'évacuation d'eaux usées et d'eaux-vannes (à basse et à haute température) à l'intérieur des bâtiments — Spécifications,1991-05-16,1,"['91.140.80','83.140.30']",ISO/TC 138/SC 1,9599,,[33705],"['en','fr']",19,

14503,IS,,ISO 7684:1997,Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the creep factor under dry conditions,Systèmes de canalisations en matières plastiques — Tubes plastiques thermodurcissables renforcés de verre (PRV) — Détermination du coefficient de fluage en condition sèche,1997-01-22,1,['23.040.20'],ISO/TC 138/SC 6,9599,,[65188],"['en','fr']",11,<p>Method for determining the dry creep factor of glass-reinforced plastics pipes. Applicable to pipes with an initial specific ring stiffness of not less than 630 N per square metres. Technically identical to EN 761:1994.</p>

14504,IS,,ISO 7685:1998,Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of initial specific ring stiffness,Systèmes de canalisation en matières plastiques — Tubes en plastiques thermodurcissables renforcés de verre (PRV) — Détermination de la rigidité annulaire spécifique initiale,1998-07-16,1,['23.040.20'],ISO/TC 138/SC 6,9599,,[71168],['en'],7,

71168,IS,,ISO 7685:2019,Glass-reinforced thermosetting plastics (GRP) pipes — Determination of initial ring stiffness,Tubes en plastiques thermodurcissables renforcés de verre (PRV) — Détermination de la rigidité annulaire initiale,2019-07-11,2,['23.040.20'],ISO/TC 138/SC 6,9599,[14504],[89596],['en'],8,"<p>This document specifies methods for determining the initial ring stiffness of glass-reinforced thermosetting plastics (GRP) pipes. Two methods are given (constant load and constant deflection), and within the specified deflection limits, each is equally valid and can be used for any diameter.</p>"

14505,IS,,ISO 7686:1992,Plastics pipes and fittings — Opacity — Test method,Tubes et raccords en matières plastiques — Opacité — Méthode d'essai,1992-06-18,1,"['23.040.45','23.040.20']",ISO/TC 138/SC 5,9599,,[41308],"['en','fr']",3,"<p>The principle consists in measuring the light flux passing through a test piece cut from a pipe or fitting as a percentage of the incident light flux on the test piece. The standard lays down the maximum acceptable limit for the light which may pass through the wall of the pipe or fitting, if the product standard specifies that they shall be opaque.</p>"

14508,IS,,ISO 7689:1988,Aerospace — Alloy steel bolts with strength classification 1 100 MPa and MJ threads — Procurement specification,"Aéronautique et espace — Vis en acier allié, de classe de résistance 1 100 MPa et à filetage MJ — Spécification d'approvisionnement",1988-02-04,1,['49.030.20'],ISO/TC 20/SC 4,9599,,[41818],"['en','fr']",14,<p>Specifies the characteristcs and quality assurance requirements for bolts with normal heads. Applies to bolts as defined provided that reference is made to this International Standard in the product standard or definition document. Gives definitions and technical requirements and test methods as well as information on qualification testing and a classi

41818,IS,,ISO 7689:2008,"Aerospace — Bolts, with MJ threads, made of alloy steel, strength class 1 100 MPa — Procurement specification","Aéronautique et espace — Vis à filetages MJ, en acier allié, de classe de résistance 1 100 MPa — Spécification d'approvisionnement",2008-09-15,2,['49.030.20'],ISO/TC 20/SC 4,9599,[14508],"[77132,61911]",['en'],21,"<p>ISO 7689:2008 specifies the characteristics and quality assurance requirements for MJ thread bolts made of alloy steel, of strength class 1 100 MPa, for aerospace construction.</p><p>It is applicable whenever it is referenced in a definition document.</p>"

14511,IS,,ISO 7692:1983,Ferrotitanium — Determination of titanium content — Titrimetric method,Ferro-titane — Dosage du titane — Méthode titrimétrique,1983-12-01,1,['77.100'],ISO/TC 132,9599,,[83913],"['en','fr']",5,"<p>The method is applicable to ferrotitanium having titanium contents between 20 and 80 % (m/m). Specifies principle, reagents, apparatus, sample, procedure, expression of results and test report. Figures show the Bunsen valve and the apparatus for titration.</p>"

14517,IS,,ISO 7698:1990,"Cereals, pulses and derived products — Enumeration of bacteria, yeasts and moulds","Céréales, légumineuses et produits dérivés — Dénombrement des bactéries, levures et moisissures",1990-04-26,1,['07.100.30'],ISO/TC 34/SC 4,9599,,"[38276,38275]","['en','fr']",6,

5049,IS,,ISO 770:1980,Oil of Eucalyptus globulus,Huile essentielle d'Eucalyptus globulus,1980-11-01,1,['71.100.60'],ISO/TC 54,9599,,"[5050,32028]","['en','fr']",2,"<p>The Standard specifies certain characteristics of the oil. The oil shall be clear and almost colourless to pale yellow, the odour characteristic, recalling cineole. The relative density at 20/20 °C has to ly between 0,906 and 0,925 and the refractive index at 20 °C between 1,4590 and 1,4670. The optical rotation shall range from 0 to + 10 . 1 volume of the oil shall not require more than 5 volumes of 70 % (V/V) ethanol at 20 °C to obtain a clear solution. The minimum of 1,8-cineole content shall be 70 %.</p>"

14519,IS,,ISO 7700-1:1984,Check of the calibration of moisture meters — Part 1: Moisture meters for cereals,Contrôle d'étalonnage des humidimètres — Partie 1: Humidimètres pour céréales,1984-07-01,1,['67.260'],ISO/TC 34/SC 4,9599,,"[44610,26724]","['en','fr']",6,"<p>The method is applicable to oats, durum wheat, wheat, maize, barley, rice, rye and sorghum. It consists in preparing of several test samples, or a range of test samples, with different moisture contents, under specified conditions, determining of their moisture contents by a reference method and measuring with the meter to be checked. An annex specifies the maximum permitted errors.</p>"

14520,IS,,ISO 7700-2:1987,Check of the calibration of moisture meters — Part 2: Moisture meters for oilseeds,Contrôle d'étalonnage des humidimètres — Partie 2: Humidimètres pour graines oléagineuses,1987-05-14,1,['67.260'],ISO/TC 34/SC 2,9599,,[46183],"['en','fr']",6,"<p>For each specien to be tested using the meter, the methods consist in preparing of several test samples, or a range of test samples, with different moisture contents, under specified conditions, determining of their moisture contents by a reference method, and measuring with the meter to be checked. Information concerning the maximum permitted errors is given in an annex.</p>"

14521,IS,,ISO 7701:1986,Dried apples — Specification,Pommes séchées — Spécifications,1986-10-02,1,['67.080.10'],ISO/TC 34,9599,,[14522],"['en','fr']",6,

14523,IS,,ISO 7702:1986,Dried pears — Specification,Poires séchées — Spécifications,1986-10-02,1,['67.080.10'],ISO/TC 34,9599,,[14524],"['en','fr']",6,

14525,IS,,ISO 7703:1986,Dried peaches — Specification,Pêches séchées — Spécifications,1986-09-25,1,['67.080.10'],ISO/TC 34,9599,,[14526],"['en','fr']",6,

14527,IS,,ISO 7704:1985,Water quality — Evaluation of membrane filters used for microbiological analyses,Qualité de l'eau — Évaluation des membranes filtrantes utilisées pour des analyses microbiologiques,1985-03-14,1,['07.100.20'],ISO/TC 147/SC 4,9599,,"[68772,78706]","['en','fr']",4,"<p>Gives a procedure for the evaluation and comparison of water-testing filters intended for the enumeration of specific organisms and mixed microbial populations. The procedure provides general guidelines for comparative testing of the recoveries of bacteria, yeasts and other fungi on membrane filters, as compared to recoveries by the spread plate and pour plate techniques.</p>"

14531,IS,,ISO 7706:1985,Road vehicles — Commercial vehicles — Clearance envelope for power take-offs (PTO),Véhicules routiers — Véhicules utilitaires — Volumes de dégagement de montage pour prises de puissance,1985-03-21,1,['43.040.50'],ISO/TC 22,9599,[14530],[29148],"['en','fr']",3,<p>Establishes the dimensions of clearance envelopes for regular and heavy duty type truck transmission power take-offs. Is applicable to clearance envelopes required immediatly adjacent to the PTO openings or drives on truck transmissions. Some figures illustrate shapes and reference quantities of concern.</p>

5051,IS,,ISO 771:1977,Oilseed residues — Determination of moisture and volatile matter content,Tourteaux de graines oléagineuses — Détermination de la teneur en eau et en matières volatiles,1977-10-01,1,['67.200.20'],ISO/TC 34/SC 2,9599,,"[66425,78000]","['en','fr']",2,"<p>The method consists in drying of a test portion at 103 + 2 C in an oven at atmosphere pressure, until practically constant mass is reached. It applies to residues ( excluding compounded products) obtained by the extraction by pressure or solvent. It cancels and replaces ISO Recommendation R 771-1968.</p>"

21259,IS,,ISO 7711-1:1997,"Dental rotary instruments — Diamond instruments — Part 1: Dimensions, requirements, marking and packaging","Instruments rotatifs dentaires — Instruments diamantés — Partie 1: Dimensions, exigences, marquage et emballage",1997-02-20,1,['11.060.20'],ISO/TC 106/SC 4,9599,[14537],[76056],"['en','fr']",48,"<p>Specifies dimensional and other relevant requirements for the 14 most commonly used shapes of dental diamond instruments, including a quality control for these instruments. Replaces ISO 7711:1984.</p>"

44003,IS,Amd,ISO 7711-1:1997/Amd 1:2009,"Dental rotary instruments — Diamond instruments — Part 1: Dimensions, requirements, marking and packaging — Amendment 1","Instruments rotatifs dentaires — Instruments diamantés — Partie 1: Dimensions, exigences, marquage et emballage — Amendement 1",2009-05-11,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[76056],"['en','fr']",1,

14537,IS,,ISO 7711:1984,Dental rotary instruments — Diamond instruments,Instruments rotatifs dentaires — Instruments diamantés,1984-12-01,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[21259],"['en','fr']",20,

14538,IS,,ISO 7711-2:1992,Dental rotary instruments — Diamond instruments — Part 2: Discs,Instruments rotatifs dentaires — Instruments diamantés — Partie 2: Disques,1992-12-10,1,['11.060.20'],ISO/TC 106/SC 4,9599,,[51956],"['en','fr']",7,<p>Specifies flat diamond discs used commonly in daily dental practice in the dental surgery. Five shapes have been selected with their specific dimensions. Attention is drawn to ISO 6360-1 and ISO 6360-2 which specify a 15 digit number for the identification of dental rotary instruments of all types.</p>

14539,IS,,ISO 7711-3:1992,"Dental rotary instruments — Diamond instruments — Part 3: Grit sizes, designation and colour code","Instruments rotatifs dentaires — Instruments diamantés — Partie 3: Tailles des grains, désignation et code de couleur",1992-12-10,1,"['01.070','11.060.20']",ISO/TC 106/SC 4,9599,,[37701],"['en','fr']",2,<p>Applies to all types of diamond rotary instruments independent of type and shape. Attention is drawn to ISO 6360-1 and ISO 6360-2 which specify a 15 digit number for the identification of dental rotary instruments of all types.</p>

37701,IS,,ISO 7711-3:2004,"Dentistry — Diamond rotary instruments — Part 3: Grit sizes, designation and colour code","Art dentaire — Instruments rotatifs diamantés — Partie 3: Taille des grains, désignation et code couleur",2004-10-27,2,"['01.070','11.060.20']",ISO/TC 106/SC 4,9599,[14539],[76056],"['en','fr']",3,"<p>ISO 7711-3:2004 specifies the designation, colour code and grit sizes for diamond rotary instruments which are used commonly in a dental surgery. It applies to all types of dental diamond rotary instruments independent of type and shape.</p><p>NOTE Attention is drawn to ISO 6360 which specifies a number coding system for the identification of dental rotary instruments of all typ

14542,IS,,ISO 7714:1985,Irrigation equipment — Volumetric valves — General requirements and test methods,Matériel agricole d'irrigation — Vannes volumétriques — Exigences générales et méthodes d'essai,1985-08-15,1,['65.060.35'],ISO/TC 23/SC 18,9599,,[14543],"['en','fr']",4,

14543,IS,,ISO 7714:1995,Agricultural irrigation equipment — Volumetric valves — General requirements and test methods,Matériel agricole d'irrigation — Vannes volumétriques — Exigences générales et méthodes d'essai,1995-04-13,2,['65.060.35'],ISO/TC 23/SC 18,9599,[14542],[26517],"['en','fr']",7,

26517,IS,,ISO 7714:2000,Agricultural irrigation equipment — Volumetric valves — General requirements and test methods,Matériel agricole d'irrigation — Vannes volumétriques — Exigences générales et méthodes d'essai,2000-11-02,3,['65.060.35'],ISO/TC 23/SC 18,9599,[14543],[43991],"['en','fr']",12,

43991,IS,,ISO 7714:2008,Agricultural irrigation equipment — Volumetric valves — General requirements and test methods,Matériel agricole d'irrigation — Vannes volumétriques — Exigences générales et méthodes d'essai,2008-08-26,4,['65.060.35'],ISO/TC 23/SC 18,9599,[26517],[68846],['en'],13,"<p>ISO 7714:2008 specifies general requirements and test methods for volumetric valves able to automatically deliver preset quantities of water. It is applicable to valves actuated by pipeline pressure and flow alone, and which do not need any other, external, source of energy.</p>"

44367,IS,,ISO 7718-1:2009,Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge — Part 1: Main deck doors,Aéronefs — Exigences d'interface des portes passagers pour accouplement d'une passerelle passagers — Partie 1: Portes de pont principal,2009-03-09,1,['49.100'],ISO/TC 20/SC 9,9599,[29863],[71422],['en'],3,"<p>ISO 7718-1:2009 specifies minimum requirements for dimensions and unobstructed space around main-deck passenger doors of future types of civil-passenger transport aircraft when they are intended to be compatible with the thousands of passenger boarding bridges and passenger transfer vehicles existing, or being planned, in airports worldwide.</

71422,IS,,ISO 7718-1:2016,Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle — Part 1: Main deck doors,Aéronefs — Exigences d'interface des portes passagers pour accouplement d'une passerelle passagers ou de véhicules de transfert de passagers — Partie 1: Portes de pont principal,2016-12-12,2,['49.100'],ISO/TC 20/SC 9,9599,"[70678,44367]",[87148],['en'],3,"<p>ISO 7718-1:2016 specifies minimum requirements for dimensions and unobstructed space around main deck passenger doors of future types of civil-passenger transport aircraft when they are intended to be compatible with the thousands of passenger boarding bridges and

14547,IS,,ISO 7718:1984,Aircraft — Connection of passenger loading bridge or transfer vehicle — Interface requirements in the vicinity of main deck passenger doors,Aéronefs — Accouplement d'une passerelle d'aéroport ou d'un autobus élévateur — Exigences de compatibilité au voisinage des portes d'accès au pont principal pour passagers,1984-11-01,1,['49.100'],ISO/TC 20/SC 9,9599,,[29863],"['en','fr']",2,<p>Specifies minimum dimensional and unobstructed space requirements around the doors of present and future public civil passenger transport aircraft when they are intended to be compatible with the thousands of passenger loading bridges and passenger transfer vehicles existing or being planned

44368,IS,,ISO 7718-2:2009,Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge — Part 2: Upper deck doors,Aéronefs — Exigences d'interface des portes passagers pour accouplement d'une passerelle passagers — Partie 2: Portes de pont supérieur,2009-03-09,1,['49.100'],ISO/TC 20/SC 9,9599,[29863],[71423],['en'],3,"<p>ISO 7718-2:2009 specifies minimum requirements for dimensions and unobstructed space around upper deck passenger doors of future types of civil-passenger transport aircraft when they are intended to be compatible with passenger boarding bridges existing, or being planned, in airports worldwide.</p><p>ISO 7718-2:2009 is not necessarily applica

71423,IS,,ISO 7718-2:2016,Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle — Part 2: Upper deck doors,Aéronefs — Exigences d'interface des portes passagers pour accouplement d'une passerelle passagers ou de véhicules de transfert de passagers — Partie 2: Portes de pont supérieur,2016-12-12,2,['49.100'],ISO/TC 20/SC 9,9599,"[70679,44368]",[87150],['en'],3,"<p>ISO 7718-2:2016 specifies the minimum dimensional and unobstructed space requirements around future civil-passenger transport aircraft upper deck passenger doors when they are intended to be compatible with passenger boarding bridges planned in airports worldwide.

29863,IS,,ISO 7718:2003,Aircraft — Main-deck passenger doors — Interface requirements for connection with passenger-boarding bridge or transfer vehicle,Aéronefs — Portes passagers du pont principal — Exigences d'interface pour accouplement d'une passerelle passagers ou d'un autobus élévateur,2003-05-13,2,['49.100'],ISO/TC 20/SC 9,9599,[14547],"[44367,44368]","['en','fr']",3,"<p>ISO 7718:2003 specifies minimum requirements for dimensions and unobstructed space around main-deck passenger doors of future types of civil-passenger transport aircraft when they are intended to be compatible with the thousands of passenger boarding bridges and passenger transfer vehicles existing, or being planned,

14548,IS,,ISO 7719:1983,"Prevailing torque type all-metal hexagon nuts, style 1 — Property classes 5, 8 and 10","Écrous hexagonaux à freinage interne, à couple préalable (tout métal), style 1 — Classes de qualité 5, 8 et 10",1983-09-01,1,['21.060.20'],ISO/TC 2,9599,,[14549],"['en','fr']",3,

14549,IS,,ISO 7719:1997,"Prevailing torque type all-metal hexagon nuts, style 1 — Property classes 5, 8 and 10","Écrous hexagonaux autofreinés tout métal, style 1 — Classes de qualité 5, 8 et 10",1997-10-30,2,['21.060.20'],ISO/TC 2/SC 12,9599,[14548],[61367],"['en','fr']",4,

61367,IS,,ISO 7719:2012,"Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10","Écrous hexagonaux normaux autofreinés tout métal — Classes de qualité 5, 8 et 10",2012-12-14,3,['21.060.20'],ISO/TC 2/SC 12,9599,[14549],"[75026,86035,66084]","['en','fr']",4,"<p>ISO 7719:2012 specifies the characteristics of prevailing torque type all-metal hexagon regular nuts with threads from M5 up to and including M36, in product grade A for threads up to and including M16 and product grade B for threads above M16, and with property classes 5, 8 and 10.</p>"

63633,IS,Cor,ISO 7719:2012/Cor 1:2013,"Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10 — Technical Corrigendum 1","Écrous hexagonaux normaux autofreinés tout métal — Classes de qualité 5, 8 et 10 — Rectificatif technique 1",2013-03-25,3,['21.060.20'],ISO/TC 2/SC 12,9599,,"[75026,86035]",['fr'],,

5052,IS,,ISO 772:1978,Liquid flow measurement in open channels — Vocabulary and symbols,Mesurage du débit des liquides dans les canaux découverts — Vocabulaire et symboles,1978-06-01,2,"['01.040.17','17.120.20']",ISO/TC 113,9599,,"[5054,5053]","['en','fr']",35,

5053,IS,,ISO 772:1988,Liquid flow measurement in open channels — Vocabulary and symbols,Mesure de débit des liquides dans les canaux découverts — Vocabulaire et symboles,1988-07-14,3,"['01.040.17','17.120.20']",ISO/TC 113,9599,[5052],[5054],"['en','fr','ru']",69,

5054,IS,,ISO 772:1996,Hydrometric determinations — Vocabulary and symbols,Déterminations hydrométriques — Vocabulaire et symboles,1996-04-25,4,"['01.040.17','17.120.20']",ISO/TC 113,9599,"[5052,5053]",[41035],"['en','fr']",99,"<p>Gives terms, definitions and symbols in the English and French language used in the scope of hydrometric determinations.</p>"

21326,IS,Amd,ISO 772:1996/Amd 1:2002,Hydrometric determinations — Vocabulary and symbols — Amendment 1: Additional terms and definitions,Déterminations hydrométriques — Vocabulaire et symboles — Amendement 1: Termes et définitions supplémentaires,2002-11-08,4,"['01.040.17','17.120.20']",ISO/TC 113,9599,,[41035],['en'],21,

37233,IS,Amd,ISO 772:1996/Amd 2:2004,Hydrometric determinations — Vocabulary and symbols — Amendment 2,Déterminations hydrométriques — Vocabulaire et symboles — Amendement 2,2004-05-04,4,"['01.040.17','17.120.20']",ISO/TC 113,9599,,[41035],['en'],20,

41035,IS,,ISO 772:2011,Hydrometry — Vocabulary and symbols,Hydrométrie — Vocabulaire et symboles,2011-07-21,5,"['01.040.17','17.120.20']",ISO/TC 113,9599,"[37233,5054,21326]",[73230],"['en','fr']",153,"<p>ISO 772:2011 gives terms, definitions and symbols used in standards in the field of hydrometry.</p>"

14550,IS,,ISO 7720:1983,"Prevailing torque type all-metal hexagon nuts, style 2 — Property class 9","Écrous hexagonaux à freinage interne, à couple préalable (tout métal), style 2 — Classe de qualité 9",1983-09-01,1,['21.060.20'],ISO/TC 2,9599,,[14551],"['en','fr']",3,

14551,IS,,ISO 7720:1997,"Prevailing torque type all-metal hexagon nuts, style 2 — Property class 9","Écrous hexagonaux autofreinés tout métal, style 2 — Classe de qualité 9",1997-10-30,2,['21.060.20'],ISO/TC 2/SC 12,9599,[14550],[61368],"['en','fr']",4,

61368,IS,,ISO 7720:2012,"Prevailing torque type all-metal hexagon nuts, style 2 — Property class 9","Écrous hexagonaux autofreinés tout métal, style 2 — Classe de qualité 9",2012-06-01,3,['21.060.20'],ISO/TC 2/SC 12,9599,[14551],"[66025,84424,66083,75023]",['en'],4,"<p>ISO 7720:2012 specifies the characteristics of prevailing torque type all-metal hexagon nuts, of style 2, with threads from M5 up to and including M36, in product grade A for threads up to and including M16, and product grade B for threads over M16, and with property class 9.</p>"

14557,IS,,ISO 7724-1:1984,Paints and varnishes — Colorimetry — Part 1: Principles,Peintures et vernis — Colorimétrie — Partie 1: Principes,1984-09-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[26880],"['en','fr']",5,"<p>Describes the colorimetric terms and fundamental requirements necessary for determining the colour co-ordinates of paint films. From among the various colour co-ordinates recommended by the CIE, the colour co-ordinates in the CIE 1964 supplementary standard colorimetric system and the colour co-ordinates in the colour space specified in CIE 1976 for measurements on paint films are in accordance with this standard.</p>"

14558,IS,,ISO 7724-2:1984,Paints and varnishes — Colorimetry — Part 2: Colour measurement,Peintures et vernis — Colorimétrie — Partie 2: Mesurage de la couleur,1984-09-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[26881],"['en','fr']",6,"<p>Describes the method for determining the colour co-ordinates of paint films. The method is only application to paint films that appear to be uniformly of one colour (monochromatic), when examined with normal vision. Paint films that do not completely hide a non-transparent substrate may be measured by using this procedure. All the other paint films are outside the scope. The principle consists in measurement of the spectral photometric characteristics (spectral r

14559,IS,,ISO 7724-3:1984,Paints and varnishes — Colorimetry — Part 3: Calculation of colour differences,Peintures et vernis — Colorimétrie — Partie 3: Calcul des différences de couleur,1984-10-01,1,['87.040'],ISO/TC 35/SC 9,9599,,[26882],"['en','fr']",3,"<p>Describes a method for the quantitative colorimetric evaluation of small differences between paint films. The CIE 1976 colour difference formula recommended in 1976 by the CIE has proved to be of practical value and is specified for this application. the principle is based on the calculation of differences in colour, lightness, chroma and hue between the paint films of a test specimen and a reference specimen in the CIE 1976 colour space

14560,IS,,ISO 7725:1991,Rubber and rubber products — Determination of bromine and chlorine content — Oxygen flask combustion technique,Caoutchouc et produits à base de caoutchouc — Détermination de la teneur en brome et en chlore — Technique de combustion dans une fiole en présence d'oxygène,1991-10-10,1,['83.060'],ISO/TC 45/SC 2,9599,,[72794],"['en','fr']",7,"<p>Describes the principle, the reagents and materials, the apparatus, the selection and preparation of intermediate test portion, the test procedure, the expression of results, and the contents of the test report. Annex A is for information only.</p>"

14561,IS,,ISO 7726:1985,Thermal environments — Instruments and methods for measuring physical quantities,Ambiances thermiques — Appareils et méthodes de mesure des grandeurs physiques,1985-07-04,1,['13.180'],ISO/TC 159/SC 5,9599,,[14562],"['en','fr']",39,

14562,IS,,ISO 7726:1998,Ergonomics of the thermal environment — Instruments for measuring physical quantities,Ergonomie des ambiances thermiques — Appareils de mesure des grandeurs physiques,1998-10-22,2,['13.180'],ISO/TC 159/SC 5,9599,[14561],"[78238,67189]","['en','fr']",51,

14564,IS,,ISO 7728:1985,Typical horizontal joints between an external wall of prefabricated ordinary concrete components and a concrete floor — Properties. characteristics and classification criteria,"Assemblages horizontaux courants entre une façade en composants préfabriqués en béton ordinaire et un plancher en béton — Propriétés, caractéristiques et éléments de la classification",1985-11-07,1,['91.080.40'],ISO/TC 59/SC 19,9599,,[87810],"['en','fr']",6,"<p>For the determination of the watertightness of a joint a method has still not been elaborated. Because of the fundamental importance of this property, a solution is proposed, by way of an example, that experience and laboratory studies h

14565,IS,,ISO 7729:1985,"Typical vertical joints between two prefabricated ordinary concrete external wall components — Properties, characteristics and classification criteria","Assemblages verticaux courants entre deux composants de façade en béton ordinaire — Propriétés, caractéristiques et éléments de la classification",1985-11-28,1,['91.080.40'],ISO/TC 59/SC 19,9599,,[87811],"['en','fr']",7,"<p>For the determination of the watertightness of a joint a method has still not been elaborated. Because of the fundamental importance of this property, solutions are proposed, by way of examples, that experiences and laboratory studies have shown to be satisfactory under the usual conditions. Is ap

14566,IS,,ISO 7730:1984,Moderate thermal environments — Determination of the PMV and PPD indices and specification of the conditions for thermal comfort,Ambiances thermiques modérées — Détermination des indices PMV et PPD et spécification des conditions de confort thermique,1984-08-01,1,['13.180'],ISO/TC 159/SC 5,9599,,[14567],"['en','fr']",19,

14567,IS,,ISO 7730:1994,Moderate thermal environments — Determination of the PMV and PPD indices and specification of the conditions for thermal comfort,Ambiances thermiques modérées — Détermination des indices PMV et PPD et spécifications des conditions de confort thermique,1994-12-22,2,['13.180'],ISO/TC 159/SC 5,9599,[14566],"[39155,34253]","['en','fr']",26,"<p>The purpose is to present a method for predicting the thermal sensation and the degree of discomfort (thermal dissatisfaction) of people exposed to moderate thermal environments and to specify acceptable environmental conditions for comfort. Applies to healthy men and women and was originally based on studies of North American and E

39155,IS,,ISO 7730:2005,Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria,Ergonomie des ambiances thermiques — Détermination analytique et interprétation du confort thermique par le calcul des indices PMV et PPD et par des critères de confort thermique local,2005-11-23,3,['13.180'],ISO/TC 159/SC 5,9599,[14567],"[85803,79394]","['en','fr']",52,"<p>ISO 7730:2005 presents methods for predicting the general thermal sensation and degree of discomfort (thermal dissatisfaction) of people exposed to moderate thermal environments. It enables the analytical determination

14568,IS,,ISO 7731:1986,Danger signals for work places — Auditory danger signals,Signaux de danger pour les lieux de travail — Signaux auditifs,1986-12-18,1,"['13.320','13.180']",ISO/TC 159/SC 5,9599,,"[33590,14569]","['en','fr']",10,<p>Specifies the safety requirements and the corresponding test methods for work places in the signal reception area and gives guidelines for the design of the signals. May also be applied to other appropriate situations. Does not apply to verbal danger warnings. Special regulations such as those for a public disaster and public transport are not affected.</p>

14576,IS,,ISO 7738:1987,Combination wrenches — Minimum length,Clés mixtes de serrage — Longueurs minimales,1987-09-24,1,['25.140.30'],ISO/TC 29/SC 10,9599,,[14577],"['en','fr']",,

14577,IS,,ISO 7738:1990,Spanners and wrenches — Combination wrenches — Minimum length and thickness of heads,Outils de manoeuvre pour vis et écrous — Clés mixtes de serrage — Longueurs minimales et épaisseurs des têtes,1990-11-22,2,['25.140.30'],ISO/TC 29/SC 10,9599,[14576],[26670],"['en','fr']",3,

26670,IS,,ISO 7738:2001,Assembly tools for screws and nuts — Combination wrenches — Lengths of wrenches and maximum thickness of heads,Outils de manoeuvre pour vis et écrous — Clés mixtes de serrage — Longueurs des clés et épaisseurs maximales des têtes,2001-03-29,3,['25.140.30'],ISO/TC 29/SC 10,9599,[14577],[62551],"['en','fr']",3,

14578,IS,,ISO 7739:1983,Cinematography — Two-track photographic sound records on 16 mm motion-picture prints — Positions and width dimensions,Cinématographie — Enregistrement de deux pistes sonores optiques sur copies d'exploitation cinématographiques 16 mm — positions et dimensions en largeur,1983-12-01,1,['37.060.20'],ISO/TC 36,9599,,[69743],"['en','fr']",2,

14583,IS,,ISO 7743:1989,"Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties",Caoutchouc vulcanisé ou thermoplastique — Détermination des propriétés de contrainte/déformation en compression,1989-06-08,1,['83.060'],ISO/TC 45/SC 2,9599,,"[25526,36956]","['en','fr']",6,"<p>Lays down a method for the determination of the compression stress-strain properties of vulcanized or thermoplastic rubber, using a specified test piece. Two procedures are given: A: With the metal plates, through which the compressive force is applied, lubricated; B: With the metal plates, through which the compressive force is applied, bonded to test piece.</p>"

14584,IS,Cor,ISO 7743:1989/Cor 1:1990,"Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties — Technical Corrigendum 1",Caoutchouc vulcanisé ou thermoplastique — Détermination des propriétés de contrainte/déformation en compression — Rectificatif technique 1,1990-12-20,1,['83.060'],ISO/TC 45/SC 2,9599,,[36956],"['en','fr']",1,"<p>On page 3, clause 12, replace the existing formulae by new formulaes.</p>"

36956,IS,,ISO 7743:2004,"Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties",Caoutchouc vulcanisé ou thermoplastique — Détermination des propriétés de contrainte/déformation en compression,2004-01-07,2,['83.060'],ISO/TC 45/SC 2,9599,"[14583,14584]",[44120],"['en','fr']",13,"<p>ISO 7743:2004 specifies methods for the determination of the compression stress-strain properties of vulcanized or thermoplastic rubber, using a standard test piece, a product or a part of a product.</p><p>Three procedures are given:</p><ul><li>using a standard test piece with the metal plates lubricated;</li><li>using a standard test piece with the metal plates bonded to the te

44120,IS,,ISO 7743:2008,"Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties",Caoutchouc vulcanisé ou thermoplastique — Détermination des propriétés de contrainte/déformation en compression,2008-04-24,3,['83.060'],ISO/TC 45/SC 2,9599,[36956],[51795],"['en','fr']",14,"<p>ISO 7743:2008 specifies methods for the determination of the compression stress-strain properties of vulcanized or thermoplastic rubber using a standard test piece, a product or a part of a product.</p><p>Three methods are given:</p><ul><li>using a standard test piece with the metal plates lubricated;</li><li>using a standard test piece with the metal plates bonded to the test piece;</l

51795,IS,,ISO 7743:2011,"Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties",Caoutchouc vulcanisé ou thermoplastique — Détermination des propriétés de contrainte/déformation en compression,2011-11-08,4,['83.060'],ISO/TC 45/SC 2,9599,[44120],[72784],"['en','fr']",21,"<p>ISO 7743:2011 specifies methods for the determination of the compression stress-strain properties of vulcanized or thermoplastic rubber using a standard test piece, a product or a part of a product.</p><p>Four procedures are given: using standard test piece A with the metal plates lubricated (method A); using standard test piece A with the metal plates bonded to the test piece (method B

14585,IS,,ISO 7744:1986,Hydraulic fluid power — Filters — Statement of requirements,Transmissions hydrauliques — Filtres — Spécification des conditions d'emploi,1986-07-10,1,['23.100.60'],ISO/TC 131/SC 6,9599,,[33044],"['en','fr']",5,"<p>A statement of requirements (SOR) is defined as a document to be provided by a user to specify his requirements to a manufacturer. A model SOR is described to enable a user to define his requirements fully, without ambiguity and in standard form so that the supplier can meet the requirements as accurate as possible. Annex A contains a standard form for a SOR, annex B shows clearances.</p>"

14586,IS,,ISO 7745:1989,Hydraulic fluid power — Fire-resistant (FR) fluids — Guidelines for use,Transmissions hydrauliques — Fluides difficilement inflammables — Principes directeurs pour leur utilisation,1989-08-17,1,['75.120'],ISO/TC 28/SC 4,9599,,[50154],"['en','fr']",11,"<p>Provides guidelines detailing, for the various categories of fluids, operational characteristics, advantages and disadvantages, and the factors affecting the choice to be made amongst these various categories. Specifies also precautions which should be adopted to reduce difficulties arising from the use of such fluids, as well as the precautions which are necessary when replacing fluids with fluids from different cate

50154,IS,,ISO 7745:2010,Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use,Transmissions hydrauliques — Fluides difficilement inflammables — Exigences et principes directeurs pour leur utilisation,2010-12-15,2,['75.120'],ISO/TC 28/SC 4,9599,[14586],[84811],"['en','fr']",23,<p>ISO 7745:2010 specifies the operational characteristics for the various categories of fire-resistant fluids defined by ISO 6743-4. ISO 7745:2010 details the factors to be considered when selecting a fluid from these categories for a proposed application.</p><p>ISO 7745:2010 identifies difficulties which might arise from the use of such fluids and indicates how they may be minimized.

14587,IS,,ISO 7746:1988,Banking — Telex formats for inter-bank messages,Banque — Messages télex interbancaires,1988-04-28,1,['03.060'],ISO/TC 68,9599,,[25427],"['en','fr']",50,

14592,IS,,ISO 7749-1:1986,Irrigation equipment — Rotating sprinklers — Part 1: Design and operational requirements,Matériel d'irrigation — Asperseurs rotatifs — Partie 1: Exigences de conception et de fonctionnement,1986-05-22,1,['65.060.35'],ISO/TC 23/SC 18,9599,,[14593],"['en','fr']",7,

14593,IS,,ISO 7749-1:1995,Agricultural irrigation equipment — Rotating sprinklers — Part 1: Design and operational requirements,Matériel agricole d'irrigation — Asperseurs rotatifs — Partie 1: Exigences de conception et de fonctionnement,1995-04-13,2,['65.060.35'],ISO/TC 23/SC 18,9599,[14592],"[77748,29482,34732]","['en','fr']",12,<p>Cancels and replaces the first edition (1986). Specifies the design and operational requirements of rotating sprinklers and sprinkler nozzles for agricultural irrigation equipment and their test methods. Applies to sprinklers intended for assembly in pipeline networks for irrigation and operation at the pressures recommended by the manufacturer.</p>

14594,IS,,ISO 7749-2:1990,Irrigation equipment — Rotating sprinklers — Part 2: Uniformity of distribution and test methods,Matériel d'irrigation — Asperseurs rotatifs — Partie 2: Uniformité de la distribution et méthodes d'essai,1990-10-04,1,['65.060.35'],ISO/TC 23/SC 18,9599,,[29483],"['en','fr']",6,

14595,IS,,ISO 7750-1:1983,Road vehicles — Air filter elements for commercial vehicles — Dimensions — Part 1: Types A and B,Véhicules routiers — Éléments de filtre à air pour véhicules utilitaires — Dimensions — Partie 1: Types A et B,1983-11-01,1,['43.060.20'],ISO/TC 22,9599,,[14596],"['en','fr']",4,

14598,IS,,ISO 7751:1983,Rubber and plastics hoses and hose assemblies — Ratios of proof and burst pressure to design working pressure,Tuyaux et flexibles en caoutchoucs et plastiques — Rapports des pressions d'épreuve et d'éclatement à la pression de service,1983-08-01,1,['23.040.70'],ISO/TC 45/SC 1,9599,[5888],[14599],"['en','fr']",1,

14599,IS,,ISO 7751:1991,Rubber and plastics hoses and hose assemblies — Ratios of proof and burst pressure to maximum working pressure,Tuyaux et flexibles en caoutchouc et en plastique — Rapports des pressions d'épreuve et d'éclatement à la pression maximale de service,1991-11-07,2,['23.040.70'],ISO/TC 45/SC 1,9599,[14598],[68054],"['en','fr']",1,<p>Specifies only ratios. The methods to perform the proof and burst tests are specified in ISO 1402. This second edition cancels and replaces the first edition (1983).</p>

57846,IS,Amd,ISO 7751:1991/Amd 1:2011,Rubber and plastics hoses and hose assemblies — Ratios of proof and burst pressure to maximum working pressure — Amendment 1: Replacement of 'design working pressure' by 'maximum working pressure' throughout text,Tuyaux et flexibles en caoutchouc et en plastique — Rapports des pressions d'épreuve et d'éclatement à la pression maximale de service — Amendement 1: Remplacement de 'pression de service' par 'pression maximale de service' dans l'ensemble du texte,2011-05-12,2,['23.040.70'],ISO/TC 45/SC 1,9599,,[68054],"['en','fr']",1,

14600,IS,,ISO 7752-1:1983,Lifting appliances — Controls — Layout and characteristics — Part 1: General principles,Appareils de levage — Organes de service — Disposition et caractéristiques — Partie 1: Principes généraux,1983-05-01,1,['53.020.01'],ISO/TC 96,9599,,[46496],"['en','fr']",2,"<p>Deals with the arrangement of those controls which are used in positioning loads and serves as general basis for the elaboration of detailed standards for particular types. Defines basic requirements of these controls, safe operation conditions and criteria for the layout of control levers and pedals.</p>"

14601,IS,,ISO 7752-2:1985,Lifting appliances — Controls — Layout and characteristics — Part 2: Basic arrangement and requirements for mobile cranes,Appareils de levage — Organes de service — Disposition et caractéristiques — Partie 2: Disposition et exigences de base pour les grues mobiles,1985-08-08,1,['53.020.20'],ISO/TC 96/SC 6,9599,,"[54058,26526]","['en','fr']",5,"<p>Establishes a consistent arrangement and movement for the basic controls used during the crane-operation cycle for slewing, load hoisting and lowering, jib luffing and telescoping. Defines the requirements, and direction of movement of these controls. Deals with bi-directional controls. Cross-shift levers (multi-directional

14602,IS,Add,ISO 7752-2:1985/Add 1:1986,Lifting appliances — Controls — Layout and characteristics — Part 2: Basic arrangement and requirements for mobile cranes — Addendum 1,Appareils de levage — Organes de service — Disposition et caractéristiques — Partie 2: Disposition et exigences de base pour les grues mobiles — Additif 1,1986-10-02,1,['53.020.20'],ISO/TC 96/SC 6,9599,,[54058],"['en','fr']",5,

54058,IS,,ISO 7752-2:2011,Cranes — Control layout and characteristics — Part 2: Basic arrangement and requirements for mobile cranes,Appareils de levage à charge suspendue — Disposition et caractéristiques des commandes — Partie 2: Disposition et exigences de base pour les grues mobiles,2011-11-03,2,['53.020.20'],ISO/TC 96/SC 6,9599,"[14601,14602]",[88567],"['en','ru']",9,"<p>ISO 7752-2:2011 establishes the arrangement, requirements and direction of movement of the basic controls for slewing, load hoisting and lowering, and boom luffing and telescoping, on mobile cranes as defined in ISO 4306-2. It deals with bi-directional controls and the basic arrangement and requirements for cross-shift