Withdrawn and superseded ISO standards — page 148 of 246

2737,IS,,ISO 666:1996,Machine tools — Mounting of plain grinding wheels by means of hub flanges,Machines-outils — Montage des meules plates par moyeux-flasques,1996-02-15,2,['25.100.70'],ISO/TC 29/SC 5,9599,[4826],[35748],"['en','fr']",7,<p>Specifies the essential dimensions and characteristics which allow the safe and efficient design and use of hub flanges with grinding wheels having bores larger than the machine spindle. Does not apply to cut-off wheels and to diamond or CBN grinding wheels with metal core. Replaces the first edition.</p>

35748,IS,,ISO 666:2006,Machine tools — Mounting of grinding wheels by means of hub flanges,Machines-outils — Montage des meules par moyeux-flasques,2006-05-15,3,['25.100.70'],ISO/TC 29/SC 5,9599,[2737],[61254],"['en','fr']",14,"<p>ISO 666:2006 specifies the essential requirements, especially dimensions, for hub flanges for plain grinding wheels according to ISO 603-1, ISO 603-2, ISO 603-4, ISO 603-6, ISO 603-7 and ISO 603-8 with a ratio of the bore diameter to the outside diameter greater than 0,2. It is also applicable for super abrasives with vitrified or metal core having the same diameters as the grinding wheels according to those parts of ISO 603, independently from the material of the

13088,IS,,ISO 6660:1980,Mangoes — Guide to storage,Mangues — Guide pour l'entreposage,1980-10-01,1,['67.080.10'],ISO/TC 34,9599,,[20798],"['en','fr']",4,

13091,IS,,ISO 6663:1983,Garlic — Guide to cold storage,Ail — Guide pour l'entreposage réfrigéré,1983-02-01,1,['67.080.20'],ISO/TC 34,9599,,[13092],"['en','fr']",2,

13095,IS,,ISO 6666:1983,Coffee triers,Sondes à café,1983-05-01,1,['67.260'],ISO/TC 34/SC 15,9599,,[44606],"['en','fr']",2,<p>Specification of an instrument suitable for taking samples through the sides of closed bags. It shall be made of a corrosion resistant metal. A figure show a model of a suitable instrument.</p>

13097,IS,,ISO 6668:1991,Green coffee — Preparation of samples for use in sensory analysis,Café vert — Préparation d'un échantillon en vue de l'analyse sensorielle,1991-06-06,1,"['67.140.20','67.240']",ISO/TC 34/SC 15,9599,,"[44609,35895,39823,28540]","['en','fr']",3,

34031,IS,Cor,ISO 6668:1991/Cor 1:2000,Green coffee — Preparation of samples for use in sensory analysis — Technical Corrigendum 1,Café vert — Préparation d'un échantillon en vue de l'analyse sensorielle — Rectificatif technique 1,2000-05-18,1,"['67.140.20','67.240']",ISO/TC 34/SC 15,9599,,"[44609,35895,39823]","['en','fr']",1,

4828,IS,,ISO 667:1981,"Rubber, compounded — Determination of cure rate — Shearing disk method",Mélanges à base de caoutchouc — Détermination de la vitesse de vulcanisation — Méthode au consistomètre à cisaillement,1981-12-01,2,['83.060'],ISO/TC 45/SC 2,9599,,[4213],"['en','fr']",2,

13099,IS,,ISO 6670:1983,Instant coffee in cases with liners — Sampling,Café soluble en caisses doublées — Échantillonnage,1983-07-01,1,['67.140.20'],ISO/TC 34/SC 15,9599,,"[28650,36182]","['en','fr']",6,"<p>Specification of a method for a consignment, shipped in ten cases or more, for the purpose of examination to determin whether the consignment complies with a contract specification; it may also be used for the selection and preparation of a sufficiently representatice sample of the consignment. It forst gives definitions of relevant terms. Then it specifies administrative arrangements, the sampling equipment (see annexes A and B), sample cotainers and packages, procedure, packing and mark

36182,IS,,ISO 6670:2002,Instant coffee — Sampling method for bulk units with liners,Café soluble — Méthode d'échantillonnage pour emballages en vrac avec doublure,2002-07-18,2,['67.140.20'],ISO/TC 34/SC 15,9599,[13099],[88020],"['en','fr']",6,"<p>This International Standard specifies a method of sampling a consignment of instant coffee, shipped in ten units or more, for the purpose of examination to determine whether the consignment complies with a contract specification.</p><p>The cases used have inner linings of moisture-resistant material, hermetically sealed because of the hygroscopic nature of instant coffee, and are in units greater than 10 kg net mass, typically up to 50 kg. This meth

13101,IS,,ISO 6673:1983,Green coffee — Determination of loss in mass at 105 degrees C,Café vert — Détermination de la perte de masse à 105 degrés C,1983-11-01,1,['67.140.20'],ISO/TC 34/SC 15,9599,,[38375],"['en','fr']",2,"<p>The method can be considered , by convention, as a method for determining the water content and can be used as such by agreement between interested parties. It consists in heating a test portion at 105 C for 16 h at atmospheric pressure.</p>"

38375,IS,,ISO 6673:2003,Green coffee — Determination of loss in mass at 105 degrees C,Café vert — Détermination de la perte de masse à 105 degrés C,2003-08-22,2,['67.140.20'],ISO/TC 34/SC 15,9599,[13101],[87697],"['en','fr']",4,"<p>ISO 6673:2003 specifies a method for the determination of the loss in mass at 105 °C of green coffee.</p><p>It is applicable to decaffeinated and non-decaffeinated green coffee as defined in ISO 3509.</p><p>This method of determining the loss in mass can be considered, by convention, as a method for determining the water content and can be used as such by agreement between the interested parties, but it gives results which are lower, by about 1,0 %, than those obt

13102,IS,,ISO 6676:1981,Acid-grade fluorspar — Determination of total phosphorus content — Molybdophosphate photometric method,Spaths fluor pour la fabrication de l'acide fluorhydrique — Dosage du phosphore total — Méthode photométrique au molybdophosphate,1981-11-01,1,['73.080'],ISO/TC 175,9599,,"[13103,13104]","['en','fr']",4,

13103,IS,,ISO 6676:1990,Acid-grade and ceramic-grade fluorspar — Determination of total phosphorus content — Reduced-molybdophosphate spectrometric method,Spaths fluor pour la fabrication de l'acide fluorhydrique et spaths fluor utilisables dans l'industrie céramique — Dosage du phosphore total — Méthode spectrométrique au molybdophosphate réduit,1990-03-08,2,['73.080'],ISO/TC 175,9599,[13102],[13104],"['en','fr']",3,

4829,IS,,ISO 668:1979,"Series 1 freight containers — Classification, external dimensions and ratings","Conteneurs de la série 1 — Classification, dimensions extérieures et masses brutes maximales",1979-04-01,3,['55.180.10'],ISO/TC 104,9599,,[4830],"['en','fr']",5,

4830,IS,,ISO 668:1988,"Series 1 freight containers — Classification, dimensions and ratings","Conteneurs de la série 1 — Classification, dimensions et masses brutes maximales",1988-04-07,4,['55.180.10'],ISO/TC 104/SC 1,9599,[4829],[24007],"['en','fr']",5,

20440,IS,Amd,ISO 668:1988/Amd 1:1993,"Series 1 freight containers — Classification, dimensions and ratings — Amendment 1","Conteneurs de la série 1 — Classification, dimensions et masses brutes maximales — Amendement 1",1993-02-25,4,['55.180.10'],ISO/TC 104/SC 1,9599,,[24007],"['en','fr']",3,

24007,IS,,ISO 668:1995,"Series 1 freight containers — Classification, dimensions and ratings","Conteneurs de la série 1 — Classification, dimensions et masses brutes maximales",1995-12-27,5,['55.180.10'],ISO/TC 104/SC 1,9599,"[20440,4830]",[59673],"['en','fr']",6,"<p>Classifies series 1 freight containers based on external dimensions and specifies the assoziated ratings and, where appropriate, the minimum internal and door opening dimensions for certain types of containers.</p>"

39867,IS,Amd,ISO 668:1995/Amd 1:2005,"Series 1 freight containers — Classification, dimensions and ratings — Amendment 1","Conteneurs de la série 1 — Classification, dimensions et masses brutes maximales — Amendement 1",2005-09-29,5,['55.180.10'],ISO/TC 104/SC 1,9599,,[59673],"['en','fr']",10,

39868,IS,Amd,ISO 668:1995/Amd 2:2005,"Series 1 freight containers — Classification, dimensions and ratings — Amendment 2: 45 containers","Conteneurs de la série 1 — Classification, dimensions et masses brutes maximales — Amendement 2: Conteneurs 45",2005-10-11,5,['55.180.10'],ISO/TC 104/SC 1,9599,,[59673],"['en','fr']",1,

59673,IS,,ISO 668:2013,"Series 1 freight containers — Classification, dimensions and ratings","Conteneurs de la série 1 — Classification, dimensions et masses brutes maximales",2013-07-25,6,['55.180.10'],ISO/TC 104/SC 1,9599,"[39868,39867,24007]",[76912],"['en','fr']",17,"<p>ISO 668:2013 establishes a classification of series 1 freight containers based on external dimensions, and specifies the associated ratings and, where appropriate, the minimum internal and door opening dimensions for certain types of containers.</p><p>These containers are intended for intercontinental traffic.</p><p>ISO 668:2013 summarizes the external and some of the internal dimensions of series 1 containers. The dimen

65916,IS,Amd,ISO 668:2013/Amd 1:2016,"Series 1 freight containers — Classification, dimensions and ratings — Amendment 1","Conteneurs de la série 1 — Classification, dimensions et masses brutes maximales — Amendement 1",2016-03-03,6,['55.180.10'],ISO/TC 104/SC 1,9599,,[76912],"['en','fr']",1,

67193,IS,Amd,ISO 668:2013/Amd 2:2016,"Series 1 freight containers — Classification, dimensions and ratings — Amendment 2","Conteneurs de la série 1 — Classification, dimensions et masses brutes maximales — Amendement 2",2016-03-03,6,['55.180.10'],ISO/TC 104/SC 1,9599,,[76912],"['en','fr']",1,

13110,IS,,ISO 6682:1980,Earth-moving machinery — Zones of comfort and reach for controls,Engins de terrassement — Zones de confort et d'accessibilité des commandes,1980-10-01,1,['53.100'],ISO/TC 127/SC 2,9599,,[13111],"['en','fr']",10,

13113,IS,,ISO 6683:1981,Earth-moving machinery — Seat belts and seat belt anchorages,Engins de terrassement — Ceintures de sécurité et ancrages pour ceintures de sécurité,1981-07-01,1,['53.100'],ISO/TC 127/SC 2,9599,,[30312],"['en','fr']",2,<p>Establishes the minimum performance requirements for seat belts and the fastening elements of seat belts necessary to restrain an operator or rider within a roll-over protective structure (ROPS) in the event of a machine roll-over as defined in ISO 3471. Applies to earth-moving machinery fitted with ROPS.</p>

13114,IS,Amd,ISO 6683:1981/Amd 1:1990,Earth-moving machinery — Seat belts and seat belt anchorages — Amendment 1,Engins de terrassement — Ceintures de sécurité et ancrages pour ceintures de sécurité — Amendement 1,1990-11-01,1,['53.100'],ISO/TC 127/SC 2,9599,,[30312],"['en','fr']",1,"<p>Page 1, clause 2, delete the existing field of application and insert the following: 'This International Standard applies to earth-moving machinery and specially designed forestry machines fitted with a ROPS as specified in ISO 3471.'</p>"

30312,IS,,ISO 6683:2005,Earth-moving machinery — Seat belts and seat belt anchorages — Performance requirements and tests,Engins de terrassement — Ceintures de sécurité et ancrages pour ceintures de sécurité — Exigences de performance et essais,2005-01-05,2,['53.100'],ISO/TC 127/SC 2,9599,"[13114,13113]",[73140],"['en','fr']",4,"<p>ISO 6683:2005 establishes the minimum performance requirements for restraint systems -- seat belts and their fastening elements (anchorages) -- on earth-moving machinery and specially designed forestry machines, necessary to restrain an operator or rider within a roll-over protective structure (ROPS) in the event of a machine roll-over (see ISO 3471), or within a

13117,IS,,ISO 6686:1981,Equipment for crop protection — Anti-drip devices — Determination of reduction of nozzle flow rate,Matériel de traitement agropharmaceutique — Dispositifs anti-gouttes — Détermination de la diminution du débit des buses,1981-04-01,1,['65.060.40'],ISO/TC 23/SC 6,9599,,[13118],"['en','fr']",4,

13119,IS,,ISO 6687:1982,Machinery for forestry — Winches — Performance requirements,Matériel forestier — Treuils — Exigences de performance,1982-11-01,1,['65.060.80'],ISO/TC 23/SC 15,9599,,[13120],"['en','fr']",3,

13120,IS,,ISO 6687:1994,Machinery for forestry — Winches — Performance requirements,Matériel forestier — Treuils — Exigences de performance,1994-09-29,2,['65.060.80'],ISO/TC 23/SC 15,9599,[13119],[32862],"['en','fr']",4,"<p>Specifies a uniform method of defining specification definition, drum storage capacity, line pull dnd line speed for winches used in tree harvesting machines. Tabulates symbols and units (table 1), contains definition.</p>"

13123,IS,,ISO 6689-1:1997,Equipment for harvesting — Combines and functional components — Part 1: Vocabulary,Matériel de récolte — Moissonneuses-batteuses et leurs composants fonctionnels — Partie 1: Vocabulaire,1997-08-14,1,"['01.040.65','65.060.50']",ISO/TC 23/SC 7,9599,[13122],[77763],"['en','fr']",21,

13122,IS,,ISO 6689:1981,"Equipment for harvesting — Combines and functional components — Definitions, characteristics and performance","Matériel de récolte — Moissonneuses- batteuses et parties constitutives fonctionnelles — Définitions, caractéristiques et performances",1981-11-01,1,['65.060.50'],ISO/TC 23/SC 7,9599,,"[13123,20753]","['en','fr']",9,

20753,IS,,ISO 6689-2:1997,Equipment for harvesting — Combines and functional components — Part 2: Assessment of characteristics and performance defined in vocabulary,Matériel de récolte — Moissonneuses-batteuses et leurs composants fonctionnels — Partie 2: Évaluation des caractéristiques et des performances définies dans le vocabulaire,1997-07-24,1,['65.060.50'],ISO/TC 23/SC 7,9599,[13122],[77764],"['en','fr']",4,

4831,IS,,ISO 669:1981,Rating of resistance welding equipment,Spécifications du matériel de soudage par résistance,1981-10-01,1,['25.160.30'],ISO/TC 44/SC 6,9599,,"[33115,2406,4832]","['en','fr']",17,

33115,IS,,ISO 669:2000,Resistance welding — Resistance welding equipment — Mechanical and electrical requirements,Soudage par résistance — Matériel de soudage par résistance — Exigences mécaniques et électriques,2000-04-13,2,['25.160.30'],ISO/TC 44/SC 6,9599,[4831],[44795],"['en','fr']",38,

13124,IS,,ISO 6690:1983,Milking machine installations — Mechanical tests,Installations de traite — Essais mécaniques de vérification,1983-02-01,1,['65.040.10'],ISO/TC 23,9599,,[13125],"['en','fr']",6,

13125,IS,,ISO 6690:1996,Milking machine installations — Mechanical tests,Installations de traite mécanique — Essais mécaniques de vérification,1996-12-19,2,['65.040.10'],ISO/TC 23,9599,[13124],[37191],"['en','fr']",27,<p>Relates to mechanical tests for milking machine installations. The tests are intended to verify compliance of an installation or component with the requirements of ISO 5707. It also specifies the accuracy requirements for the measuring instruments. Replaces the first edition.</p>

13126,IS,,ISO 6691:1989,Thermoplastics for plain bearings — Classification and designation,Matières thermoplastiques pour paliers lisses — Classification et désignation,1989-11-23,1,"['83.080.20','21.100.10']",ISO/TC 123/SC 2,9599,,[30440],"['en','fr']",17,

30440,IS,,ISO 6691:2000,Thermoplastic polymers for plain bearings — Classification and designation,Polymères thermoplastiques pour paliers lisses — Classification et désignation,2000-05-18,2,"['83.080.20','21.100.10']",ISO/TC 123/SC 2,9599,[13126],[78495],"['en','fr']",24,"<p>This International Standard specifies a classification and designation system for a selection of the most common</p><p>unfilled thermoplastic polymers for plain bearings.</p><p>The unfilled thermoplastic polymers are classified on the basis of appropriate levels of distinctive properties,</p><p>additives and information about their application for plain bearings. The designation system does not include all</p><p>propert

13130,IS,,ISO 6695:1991,Cycles — Pedal axle and crank assembly with square end fitting — Assembly dimensions,Cycles — Axe de pédalier et manivelle à emmanchement carré — Dimensions d'assemblage,1991-02-28,1,['43.150'],ISO/TC 149,9599,,"[65002,37121]","['en','fr']",2,<p>Gives the dimensions for the assembly of cranks on bottom bracket pedal axles with square end fittings. Dimensions for the assembly of cranks on bottom bracket pedal axles with square end fittings shall be as given in the figure and the table.</p>

13133,IS,,ISO 6698:1981,Cycles — Screw threads used to assemble freewheels on bicycle hubs,Cycles — Filetages utilisés pour l'assemblage des roues libres sur les moyeux de bicyclettes,1981-07-01,1,['43.150'],ISO/TC 149,9599,,[13134],"['en','fr']",6,

13135,IS,,ISO 6699:1990,Cycles — Stem and handlebar bend — Assembly dimensions,Cycles — Potence et cintre de guidon — Dimensions d'assemblage,1990-10-25,1,['43.150'],ISO/TC 149,9599,,[65004],"['en','fr']",2,"<p>Gives the dimensions and tolerances to ensure secure assembly between the stem and the handlebar bend. Applies to bicycles intended for use on public roads, and on which the saddle can be adjusted to provide a saddle height of 635 mm or more. Does not apply to specialized types of bicycle such as trademen's delivery bicycles, tandems, toy bicycles and bicycles designed and equipped for use in sanctioned competitive events.</p>"

13138,IS,,ISO 6702:1984,Aircraft — Requirements for on board weight and balance control systems,Aéronefs — Caractéristiques des systèmes de contrôle de la masse et du centrage à bord,1984-12-01,1,"['49.090','49.120']",ISO/TC 20/SC 9,9599,,"[13139,13140]","['en','fr']",4,

13147,IS,,ISO 6707-1:1984,Building and civil engineering — General vocabulary,Bâtiment et génie civil — Vocabulaire général,1984-04-01,1,"['01.040.93','93.010','91.010.01','01.040.91']",ISO/TC 59/SC 2,9599,,[13148],"['en','fr']",24,

13148,IS,,ISO 6707-1:1989,Building and civil engineering — Vocabulary — Part 1: General terms,Bâtiment et génie civil — Vocabulaire — Partie 1: Termes généraux,1989-08-10,2,"['01.040.93','93.010','91.010.01','01.040.91']",ISO/TC 59/SC 2,9599,[13147],[32404],"['en','fr']",33,"<p>Defines general terms, in English and French, applicable to building and civil engineering works. Comprises a) fundamental concepts which may be the starting point for other, more specific, definitions; b) more specific concepts used in several areas in building and that may be used commonly in standards, regulations and contracts.</p>"

32404,IS,,ISO 6707-1:2004,Building and civil engineering — Vocabulary — Part 1: General terms,Bâtiment et génie civil — Vocabulaire — Partie 1: Termes généraux,2004-06-18,3,"['01.040.93','93.010','91.010.01','01.040.91']",ISO/TC 59/SC 2,9599,[13148],[60034],['en'],110,"<p>ISO 6707-1:2004 defines general terms to establish a vocabulary applicable to building and civil engineering. It comprises fundamental concepts, which may be the starting point for other, more specific, definitions, as well as more specific concepts used in several areas of construction and frequently used in standards, regulations and contracts.</p>"

60034,IS,,ISO 6707-1:2014,Buildings and civil engineering works — Vocabulary — Part 1: General terms,Bâtiments et ouvrages de génie civil — Vocabulaire — Partie 1: Termes généraux,2014-03-18,4,"['01.040.93','93.010','91.010.01','01.040.91']",ISO/TC 59/SC 2,9599,[32404],[72244],['en'],101,"<p>ISO 6707-1:2014 contains the terms and definitions of general concepts to establish a vocabulary applicable to buildings and civil engineering works.</p><p>It comprises: fundamental concepts, which can be the starting point for other, more specific, definitions; and more specific concepts, used in several areas of construction and frequently used in standards, regulations, and contracts.</p>"

72244,IS,,ISO 6707-1:2017,Buildings and civil engineering works — Vocabulary — Part 1: General terms,Bâtiments et ouvrages de génie civil — Vocabulaire — Partie 1: Termes généraux,2017-11-06,5,"['01.040.93','93.010','91.010.01','01.040.91']",ISO/TC 59/SC 2,9599,"[7356,60034]",[77077],['en'],128,"<p>ISO 6707-1:2017 contains the terms and definitions of general concepts to establish a vocabulary applicable to buildings and civil engineering works.</p><p>It comprises:</p><p>a) fundamental concepts, which can be the starting point for other, more specific, definitions;</p><p>b) more specific concepts, used in several areas of construction and frequently used in standards, regulations and c

13149,IS,,ISO 6707-2:1993,Building and civil engineering — Vocabulary — Part 2: Contract terms,Bâtiment et génie civil — Vocabulaire — Partie 2: Termes relatifs aux marchés,1993-12-23,1,"['91.010.20','01.040.91']",ISO/TC 59/SC 2,9599,,"[32403,60035]","['en','fr']",13,"<p>Defines 179 terms in English and French arranged in alphabetical order in English within the following eight categories: general concepts, project information, design phase, contracts, financial, construction, post-construction maintenance, persons involved.</p>"

60035,IS,,ISO 6707-2:2014,Buildings and civil engineering works — Vocabulary — Part 2: Contract terms,Bâtiments et ouvrages de génie civil — Vocabulaire — Partie 2: Termes relatifs aux marchés,2014-03-18,2,"['91.010.20','01.040.91']",ISO/TC 59/SC 2,9599,[13149],[70040],['en'],20,<p>ISO 6707-2:2014 defines terms applicable to contracts related to buildings and civil engineering works.</p>

66633,IS,,ISO 6707-3:2017,Buildings and civil engineering works — Vocabulary — Part 3: Sustainability terms,Batiments et ouvrages de genie civil — Vocabulaire — Partie 3: Termes relatifs a la durabilite,2017-08-09,1,"['91.010.20','01.040.91']",ISO/TC 59/SC 2,9599,,[80456],['en'],37,<p>ISO 6707-3:2017 establishes preferred terms and definitions for concepts applicable to sustainability and sustainable development related to buildings and civil engineering works.</p><p>NOTE It focuses on concepts that have been standardized and/or applied through publication of individual International Standards within ISO/TC 59/SC 17 and on terms and definitions of concepts frequently encountered in

13151,IS,,ISO 6708:1980,Pipe components — Definition of nominal size,Éléments de tuyauterie — Définition du diamètre nominal,1980-06-01,1,['23.040'],ISO/TC 5/SC 10,9599,,[21274],"['en','fr']",1,

13152,IS,,ISO 6709:1983,"Standard representation of latitude, longitude and altitude for geographic point locations","Représentation normalisée des latitude, longitude et altitude pour la localisation des points géographiques",1983-05-01,1,['35.240.70'],ISO/TC 211,9599,,"[39242,31384]","['en','fr']",3,"<p>Describes a variable-length format for the representation of latitude, longitude and altitude for use in data interchange. Allows the use of normal sexagesimal notations involving degrees, minutes and seconds as well as various combinations of sexagesimal and decimal notations. Uses numeric characters 0 to 9, graphic characters plus (+), minus (-), full stop (.) and comma (,).</p>"

39242,IS,,ISO 6709:2008,Standard representation of geographic point location by coordinates,Représentation normalisée de la localisation des points géographiques par coordonnées,2008-07-02,2,['35.240.70'],ISO/TC 211,9599,[13152],[75147],"['en','fr','ru']",28,"<p>ISO 6709:2008 is applicable to the interchange of coordinates describing geographic point location. It specifies the representation of coordinates, including latitude and longitude, to be used in data interchange. It additionally specifies representation of horizontal point location using coordinate types other than latitude and longitude. It also specifies the representation of height and depth that can be associated with horizontal

53539,IS,Cor,ISO 6709:2008/Cor 1:2009,Standard representation of geographic point location by coordinates — Technical Corrigendum 1,Représentation normalisée de la localisation des points géographiques par coordonnées — Rectificatif technique 1,2009-01-13,2,['35.240.70'],ISO/TC 211,9599,,[75147],"['en','ru']",2,

13153,IS,,ISO 6710:1995,Single-use containers for venous blood specimen collection,Récipients non réutilisables pour prélèvements de sang veineux,1995-08-03,1,['11.040.20'],ISO/TC 76,9599,[10799],"[69659,33506]","['en','fr']",12,<p>Specifies requirements and test methods for evacuated and non-evacuated single-use venous blood specimen containers. Does not apply for blood collection needles.</p>

13156,IS,,ISO 6713:1980,Paints and varnishes — Preparation of acid extracts from liquid paints,Peintures et vernis — Préparation des extraits acides des peintures liquides,1980-04-01,1,['87.040'],ISO/TC 256,9599,,[13157],"['en','fr']",4,

13161,IS,,ISO 6718:1985,Bursting discs and bursting disc devices,Disques de rupture et dispositifs à disque de rupture,1985-09-05,1,['13.240'],ISO/TC 185,9599,,[13162],"['en','fr']",20,

13162,IS,,ISO 6718:1991,Bursting discs and bursting disc devices,Disques de rupture et dispositifs à disque de rupture,1991-12-05,2,['13.240'],ISO/TC 185,9599,[13161],"[25677,34204,35405,25674,25675,34605,34205,25676,9880,34203]","['en','fr']",31,"<p>Specifies requirements and 39 terms and definitions. This second edition cancels and replaces the first edition (1985). Annexes A, B, C and D are for information only.</p>"

22788,IS,Cor,ISO 6718:1991/Cor 1:1993,Bursting discs and bursting disc devices — Technical Corrigendum 1,Disques de rupture et dispositifs à disque de rupture — Rectificatif technique 1,1993-09-30,2,['13.240'],ISO/TC 185,9599,,"[34204,35405,34605,34205,34203]",['fr'],,

13163,IS,,ISO 6719:1986,Anodized aluminium and aluminium alloys — Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments,Aluminium et alliages d'aluminium anodisés — Mesurage des caractéristiques de réflectivité des surfaces d'aluminium à l'aide d'instruments intégrateurs sphériques,1986-08-21,1,['25.220.20'],ISO/TC 79/SC 2,9599,,[52773],"['en','fr']",6,"<p>ISO 6719 specifies a method of measuring the total and diffuse luminous reflectance at different angles of incidence. The method is equally applicable to the measurement of specular reflectance (principal gloss value), specularity, and diffuseness.</p>"

13164,IS,,ISO 6720:1981,"Agricultural machinery — Equipment for sowing, planting, distributing fertilizers and spraying — Recommended working widths","Matériel agricole — Matériel de semis, de plantation, distributeurs d'engrais et pulvérisateurs — Largeurs de travail recommandées",1981-09-01,1,"['65.060.30','65.060.40','65.060.25']",ISO/TC 23,9599,,[13165],"['en','fr']",1,

13167,IS,,ISO 6721-1:1994,Plastics — Determination of dynamic mechanical properties — Part 1: General principles,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 1: Principes généraux,1994-11-03,1,['83.080.01'],ISO/TC 61/SC 2,9599,"[4611,13166]",[34447],"['en','fr']",20,

25655,IS,Cor,ISO 6721-1:1994/Cor 1:1995,Plastics — Determination of dynamic mechanical properties — Part 1: General principles — Technical Corrigendum 1,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 1: Principes généraux — Rectificatif technique 1,1995-03-16,1,['83.080.01'],ISO/TC 61/SC 2,9599,,[34447],"['en','fr']",1,

34447,IS,,ISO 6721-1:2001,Plastics — Determination of dynamic mechanical properties — Part 1: General principles,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 1: Principes généraux,2001-05-31,2,['83.080.01'],ISO/TC 61/SC 2,9599,"[13167,25655]",[57312],"['en','fr']",20,

57312,IS,,ISO 6721-1:2011,Plastics — Determination of dynamic mechanical properties — Part 1: General principles,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 1: Principes généraux,2011-05-11,3,['83.080.01'],ISO/TC 61/SC 5,9599,"[51226,34447]",[73142],"['en','fr','ru']",20,"<p>The various parts of ISO 6721 specify methods for the determination of the dynamic mechanical properties of rigid plastics within the region of linear viscoelastic behaviour. ISO 6721-1:2011 is an introductory section which includes the definitions and all aspects that are common to the individual test methods described in the subsequent parts.</p><p>Different deformation modes may produce re

25912,IS,,ISO 6721-10:1997,Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 10: Viscosité complexe en cisaillement à l'aide d'un rhéomètre à oscillations à plateaux parallèles,1997-08-07,1,['83.080.01'],ISO/TC 61/SC 2,9599,"[4611,13166]",[30502],"['en','fr']",11,

30502,IS,,ISO 6721-10:1999,Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 10: Viscosité complexe en cisaillement à l'aide d'un rhéomètre à oscillations à plateaux parallèles,1999-12-16,2,['83.080.01'],ISO/TC 61/SC 2,9599,[25912],[62159],"['en','fr']",15,

62159,IS,,ISO 6721-10:2015,Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 10: Viscosité complexe en cisaillement à l'aide d'un rhéomètre à oscillations à plateaux parallèles,2015-09-21,3,['83.080.01'],ISO/TC 61/SC 5,9599,[30502],[84510],['en'],19,"<p>ISO 6721-10:2015 specifies the general principles of a method for determining the dynamic rheological properties of polymer melts at angular frequencies typically in the range of 0,01 rad·s-1 to 100 rad·s-1 by means of an oscillatory rheometer with a parallel-plate geometry. Angular f

52845,IS,,ISO 6721-11:2012,Plastics — Determination of dynamic mechanical properties — Part 11: Glass transition temperature,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 11: Température de transition vitreuse,2012-03-21,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[74988],['en'],12,

42531,IS,,ISO 6721-12:2009,Plastics — Determination of dynamic mechanical properties — Part 12: Compressive vibration — Non-resonance method,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 12: Vibration en compression — Méthode hors résonance,2009-11-17,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[81831],['en'],7,"<p>ISO 6721-12:2009 describes a compressive vibration, non-resonance method for determining the components of the compressive complex modulus <i>E</i>* of polymers at frequencies typically in the range 0,01 Hz to 100 Hz. The method is suitable for measuring dynamic storage moduli of semi-rigid polymers in the range 1 MPa to 1 GPa.</p>"

13166,IS,,ISO 6721:1983,Plastics — Determination of damping properties and complex modulus by bending vibration,"Plastiques — Détermination des propriétés d'amortissement et du module complexe, au moyen de vibration en flexion",1983-09-01,1,['83.080'],ISO/TC 61/SC 2,9599,,"[13167,25912,13169,20987]","['en','fr']",5,

13168,IS,,ISO 6721-2:1994,Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 2: Méthode au pendule de torsion,1994-11-03,1,['83.080.01'],ISO/TC 61/SC 2,9599,[4611],[43492],"['en','fr']",12,"<p>Specifies two methods for determining the linear dynamic mechanical properties of plastics, i. e. the storage and loss components of the torsional modulus, as a function of temperature, for small deformations within the frequency range from 0,1 Hz to 10 Hz. Also provides information concerning the onset of plastic flow.</p>"

25656,IS,Cor,ISO 6721-2:1994/Cor 1:1995,Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method — Technical Corrigendum 1,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 2: Méthode au pendule de torsion — Rectificatif technique 1,1995-03-16,1,['83.080.01'],ISO/TC 61/SC 2,9599,,[43492],"['en','fr']",1,<p>Replaces the last sentence in the left-hand column of annex C on page 10.</p>

43492,IS,,ISO 6721-2:2008,Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 2: Méthode au pendule de torsion,2008-05-26,2,['83.080.01'],ISO/TC 61/SC 5,9599,"[25656,13168]",[73143],"['en','fr']",14,"<p>ISO 6721-2:2008 specifies two methods (A and B) for determining the linear dynamic mechanical properties of plastics, i.e. the storage and loss components of the torsional modulus, as a function of temperature, for small deformations within the frequency range from 0,1 Hz to 10 Hz.</p><p>The temperature dependence of these properties, measured over a sufficiently broad range of tem

13169,IS,,ISO 6721-3:1994,Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 3: Vibration en flexion — Méthode en résonance,1994-11-03,1,['83.080.01'],ISO/TC 61/SC 5,9599,[13166],[79997],"['en','fr']",10,<p>Specifies a bending-vibration method based upon resonance curves for determining the flexural complex modulus of homogeneous plastics and the damping properties of laminated plastics intended for acoustic insulation.</p>

25657,IS,Cor,ISO 6721-3:1994/Cor 1:1995,Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method — Technical Corrigendum 1,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 3: Vibration en flexion — Méthode en résonance — Rectificatif technique 1,1995-03-16,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[79997],"['en','fr']",1,<p>Corrects the first sentence in the second paragraph of subclause 9.5 on page 5.</p>

20987,IS,,ISO 6721-4:1994,Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 4: Vibration en traction — Méthode hors résonance,1994-11-03,1,['83.080.01'],ISO/TC 61/SC 2,9599,"[4611,13166]",[43493],"['en','fr']",6,"<p>Describes a forced, nonresonance method for determining the components of the tensile complex modulus of polymers at frequencies typically in the range 0,01 Hz to 100 Hz. The method is suitable for measuring dynamic storage moduli in the range 0,01 GPa to 5 GPa and to the measurement of loss factors greater than 0,1 und may therefore be conveniently

43493,IS,,ISO 6721-4:2008,Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 4: Vibration en traction — Méthode hors résonance,2008-04-16,2,['83.080.01'],ISO/TC 61/SC 5,9599,[20987],[73144],"['en','fr']",8,"<p>ISO 6721-4:2008 describes a forced, non-resonance method for determining the components of the tensile complex modulus <i>E</i>* of polymers at frequencies typically in the range 0,01 Hz to 100 Hz. The method is suitable for measuring dynamic storage moduli in the range 0,01 GPa to 5 GPa. Although materials with moduli outside this range may be studied, alt

23978,IS,,ISO 6721-5:1996,Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 5: Vibration en flexion — Méthode hors résonance,1996-05-30,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[73145],"['en','fr']",8,"<p>Describes a flexural vibration method for determining the components of the Young's complex modulus E/Zeichen) of polymers at frequencies typically in the range 0,01 Hz to 100 Hz. Suitable for measuring dynamic storage moduli in the range 10 MPa to 200 MPa. Particularly suited to the measurement of loss factors greater than 0,1.</p>"

36259,IS,Amd,ISO 6721-5:1996/Amd 1:2007,Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method — Amendment 1,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 5: Vibration en flexion — Méthode hors résonance — Amendement 1,2007-01-15,1,['83.080.01'],ISO/TC 61/SC 2,9599,,[73145],['en'],1,

23979,IS,,ISO 6721-6:1996,Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 6: Vibration en cisaillement — Méthode hors résonance,1996-05-23,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[73146],"['en','fr']",7,"<p>Describes a shear vibration method for determining the components of the shear complex modulus G/Zeichen) of polymers at frequencies typically in the range 0,01 Hz to 100 Hz. Suitable for measuring dynamic storage moduli in the range 0,1 MPa to 50 MPa. Particularly suited to the measurement of loss factors greater than 0,1.</p>"

36261,IS,Amd,ISO 6721-6:1996/Amd 1:2007,Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method — Amendment 1,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 6: Vibration en cisaillement — Méthode hors résonance — Amendement 1,2007-01-15,1,['83.080.01'],ISO/TC 61/SC 2,9599,,[73146],['en'],1,

24332,IS,,ISO 6721-7:1996,Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 7: Vibration en torsion — Méthode hors résonance,1996-05-23,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[73147],"['en','fr']",7,"<p>Describes a torsional vibration method for determining the components of the shear complex modulus G/Zeichen) of solid polymers in the form of bars or rods at frequencies typically in the range 0,001 Hz to 100 Hz. Suitable for measuring dynamic storage moduli ranging from about 10 MPa to values of about 10 GPa. Particularly suited to the measurement of loss facto

36262,IS,Amd,ISO 6721-7:1996/Amd 1:2007,Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method — Amendment 1,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 7: Vibration en torsion — Méthode hors résonance — Amendement 1,2007-01-15,1,['83.080.01'],ISO/TC 61/SC 2,9599,,[73147],['en'],1,

25169,IS,,ISO 6721-8:1997,Plastics — Determination of dynamic mechanical properties — Part 8: Longitudinal and shear vibration — Wave-propagation method,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 8: Vibrations longitudinale et en cisaillement — Méthode de propagation des ondes,1997-06-05,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[74986],"['en','fr']",14,

25913,IS,,ISO 6721-9:1997,Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 9: Vibration en traction — Méthode de propagation de signaux acoustiques,1997-06-05,1,['83.080.01'],ISO/TC 61/SC 5,9599,,[74987],"['en','fr']",7,

38238,IS,Amd,ISO 6721-9:1997/Amd 1:2007,Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method — Amendment 1: Precision,Plastiques — Détermination des propriétés mécaniques dynamiques — Partie 9: Vibration en traction — Méthode de propagation de signaux acoustiques — Amendement 1: Fiabilité,2007-11-06,1,['83.080.01'],ISO/TC 61/SC 2,9599,,[74987],['en'],2,

13170,IS,,ISO 6722-1:1981,Road vehicles — Unscreened low-tension cables — Part 1: General requirements and test methods,Véhicules routiers — Câbles basse tension non blindés — Partie 1: Spécifications générales et méthodes d'essai,1981-04-01,1,['43.040.10'],ISO/TC 22,9599,,"[13171,13172]",['en'],10,

13171,IS,,ISO 6722-1:1984,Road vehicles — Unscreened low-tension cables — Part 1: General requirements and test methods,Véhicules routiers — Câbles basse tension non blindés — Partie 1: Spécifications générales et méthodes d'essai,1984-12-01,2,['43.040.10'],ISO/TC 22,9599,[13170],[13172],"['en','fr']",10,

13172,IS,,ISO 6722-1:1996,Road vehicles — Unscreened low-tension cables — Part 1: Test methods,Véhicules routiers — Câbles basse tension non blindés — Partie 1: Méthodes d'essai,1996-02-15,3,['43.040.10'],ISO/TC 22,9599,"[13170,13171]",[28773],"['en','fr']",15,<p>Gives the test methods for unscreened single-core low-tension cables (nominal voltage of 50 V) used in road vehicle applications. It also applies to the individual cores in multi-core cables. Replaces the second edition.</p>

13173,IS,,ISO 6722-2:1982,"Unscreened low-tension cables — Part 2: Cable classes, applicable tests and special requirements","Câbles basse tension non blindés — Partie 2: Classes de câbles, essais applicables et spécifications particulières",1982-12-01,1,['43.040.10'],ISO/TC 22,9599,,"[13174,13175]","['en','fr']",3,

13174,IS,,ISO 6722-2:1985,"Road vehicles — Unscreened low-tension cables — Part 2: Cable classes, applicable tests and special requirements","Véhicules routiers — Câbles basse tension non blindés — Partie 2: Classes de câbles, essais applicables et spécifications particulières",1985-04-11,2,['43.040.10'],ISO/TC 22,9599,[13173],[13175],['en'],3,

13175,IS,,ISO 6722-2:1996,Road vehicles — Unscreened low-tension cables — Part 2: Requirements,Véhicules routiers — Câbles basse tension non blindés — Partie 2: Exigences,1996-02-15,3,['43.040.10'],ISO/TC 22,9599,"[13174,13173]","[28773,28544]","['en','fr']",3,<p>Specifies the requirements for unscreened single-core low-tension cables (nominal voltage of 50 V) used in road vehicle applications. It also applies to the individual cores in multi-core cables. Replaces the second edition.</p>

28773,IS,,ISO 6722:2002,"Road vehicles — 60 V and 600 V single-core cables — Dimensions, test methods and requirements","Véhicules routiers — Câbles monoconducteurs de 60 V et 600 V — Dimensions, méthodes d'essai et exigences",2002-05-02,1,['43.040.10'],ISO/TC 22,9599,"[13177,13178,13175,13172]",[39709],"['en','fr']",34,"<p>This International Standard specifies dimensions, test methods and requirements for single-core 60 V cables intended for use in road vehicle applications where the nominal system voltage is less than or equal to 60 V d.c., and for 600 V cables intended for use in road vehicle applications where the nominal system voltage is in the range of from 60 V d.c. to 600 V d.c. inc

39709,IS,,ISO 6722:2006,"Road vehicles — 60 V and 600 V single-core cables — Dimensions, test methods and requirements","Véhicules routiers — Câbles monoconducteurs de 60 V et 600 V — Dimensions, méthodes d'essai et exigences",2006-07-26,2,['43.040.10'],ISO/TC 22,9599,[28773],"[50022,55714]",['en'],37,"<p>ISO 6722:2006 specifies the dimensions, test methods, and requirements for single-core 60 V cables intended for use in road vehicle applications where the nominal system voltage is equal to or less than (60 V d.c. or 25 V a.c.). It also specifies additional test methods and/or requirements for 600 V cables intended for use in road vehicle applications where the nominal system voltage is gre

13176,IS,,ISO 6722-3:1984,Road vehicles — Unscreened low-tension cables — Part 3: Conductor sizes and dimensions,Véhicules routiers — Câbles basse tension non blindés — Partie 3: Sections et dimensions des conducteurs,1984-12-01,1,['43.040.10'],ISO/TC 22,9599,,[13177],"['en','fr']",2,

13177,IS,,ISO 6722-3:1993,Road vehicles — Unscreened low-tension cables — Part 3: Conductor sizes and dimensions for thick-wall insulated cables,Véhicules routiers — Câbles basse tension non blindés — Partie 3: Sections et dimensions des conducteurs à enveloppe isolante d'épaisseur normale,1993-01-28,2,['43.040.10'],ISO/TC 22,9599,[13176],"[28773,28545]","['en','fr']",3,"<p>Specifies cable colour identification, dimensional requirements, tests and performance requirements. Annex A gives cross-sectional areas and resistances for low-tension cables in current sizes.</p>"

13178,IS,,ISO 6722-4:1993,Road vehicles — Unscreened low-tension cables — Part 4: Conductor sizes and dimensions for thin-wall insulated cables,Véhicules routiers — Câbles basse tension non blindés — Partie 4: Sections et dimensions des conducteurs à enveloppe isolante mince,1993-01-28,1,['43.040.10'],ISO/TC 22,9599,,"[28773,28546]","['en','fr']",3,"<p>Specifies cable colour identification, dimensional requirements, tests and performance requirements. Annex A gives cross-sectional areas and resistances for low-tension cables in current sizes.</p>"

13182,IS,,ISO 6726:1980,Road vehicles — Weights of mopeds and motorcycles with two wheels — Vocabulary,Véhicules routiers — Poids des cyclomoteurs et motocycles à deux roues — Vocabulaire,1980-12-01,1,"['43.140','01.040.43']",ISO/TC 22,9599,,[13183],"['en','fr']",3,