Withdrawn and superseded ISO standards — page 147 of 246

51492,IS,,ISO 6581:2010,Anodizing of aluminium and its alloys — Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings,Anodisation de l'aluminium et de ses alliages — Détermination de la solidité comparée à la lumière ultraviolette et à la chaleur des couches anodiques colorées,2010-07-05,2,['25.220.20'],ISO/TC 79/SC 2,9599,[12987],[72174],"['en','fr']",3,<p>ISO 6581:2010 specifies a comparative method for the determination of the fastness of coloured anodic oxidation coatings to ultraviolet (UV) light and heat.</p><p>The method is not suitable for testing coloured anodic oxidation coatings that are heat sensitive.</p>

12992,IS,,ISO 6587:1980,"Paper, board and pulps — Determination of conductivity of aqueous extracts","Papier, carton et pâtes — Détermination de la conductivité des extraits aqueux",1980-12-01,1,"['85.060','85.040']",ISO/TC 6,9599,,[12993],"['en','fr']",3,

12993,IS,,ISO 6587:1992,"Paper, board and pulps — Determination of conductivity of aqueous extracts","Papier, carton et pâtes — Détermination de la conductivité des extraits aqueux",1992-04-30,2,"['85.060','85.040']",ISO/TC 6,9599,[12992],[81632],"['en','fr']",4,"<p>The method described is applicable to all kinds of paper, board and pulps, except for papers used for electrical purposes. For high purity papers used for electrical purposes, the method used should be that given in IEC 554-2. Conductivity is measured by means of a conductivity meter or resistance bridge, using alternating current.</p>"

41368,IS,,ISO 6588-1:2005,"Paper, board and pulps — Determination of pH of aqueous extracts — Part 1: Cold extraction","Papier, carton et pâtes — Détermination du pH des extraits aqueux — Partie 1: Extraction à froid",2005-06-02,1,"['85.060','85.040']",ISO/TC 6,9599,[12994],[59783],"['en','fr','ru']",6,"<p>ISO 6588-1:2005 specifies a method for the determination of the pH-value defined by the electrolytes extractable by cold water from a sample of paper, board or pulp. </p><p>ISO 6588-1:2005 is applicable to all types of paper, board and pulp.</p>"

59783,IS,,ISO 6588-1:2012,"Paper, board and pulps — Determination of pH of aqueous extracts — Part 1: Cold extraction","Papier, carton et pâtes — Détermination du pH des extraits aqueux — Partie 1: Extraction à froid",2012-10-29,2,"['85.060','85.040']",ISO/TC 6,9599,[41368],[77946],"['en','fr']",7,"<p>ISO 6588-1:2012 specifies a method for the determination of the pH-value defined by the electrolytes extractable by cold water from a sample of paper, board or pulp.</p><p>ISO 6588-1:2012 is applicable to all types of paper, board and pulp.</p><p>As the quantity of extractable ionic material approaches zero, as in the case of highly purified pulps, the precision of the method becomes poor becau

77946,IS,,ISO 6588-1:2020,"Paper, board and pulps — Determination of pH of aqueous extracts — Part 1: Cold extraction","Papier, carton et pâtes — Détermination du pH des extraits aqueux — Partie 1: Extraction à froid",2020-02-24,3,"['85.060','85.040']",ISO/TC 6,9599,[59783],[83250],"['en','fr']",7,"<p>This document specifies a method for the determination of the pH-value defined by the electrolytes extractable by cold water from a sample of paper, board or pulp.</p><p>This document is applicable to all types of paper, board and pulp.</p><p>As the quantity of extractable ionic material approaches zero, as in the case of highly purified pulps, the precision of the method becomes poor because o

12994,IS,,ISO 6588:1981,"Paper, board and pulps — Determination of pH of aqueous extracts","Papier, carton et pâtes — Détermination du pH des extraits aqueux",1981-04-01,1,"['85.060','85.040']",ISO/TC 6,9599,,"[41368,41369]","['en','fr']",3,"<p>Is applicable to all kinds of paper, board and pulps yielding an extract having a conductivity exceeding 0.2 mS/m when determined in accordance with ISO 6587, except for papers used for electrical purposes. For high purity papers used for electrical purposes, the method should be that given in IEC Publication 554-2.</p>"

41369,IS,,ISO 6588-2:2005,"Paper, board and pulps — Determination of pH of aqueous extracts — Part 2: Hot extraction","Papier, carton et pâtes — Détermination du pH des extraits aqueux — Partie 2: Extraction à chaud",2005-06-02,1,"['85.060','85.040']",ISO/TC 6,9599,[12994],[59784],"['en','fr','ru']",6,"<p>ISO 6588-2:2005 specifies a method for the determination of the pH-value defined by the electrolytes extractable by hot water from a sample of paper, board or pulp. </p><p>ISO 6588-2:2005 is applicable to all kinds of paper, board and pulp.</p>"

59784,IS,,ISO 6588-2:2012,"Paper, board and pulps — Determination of pH of aqueous extracts — Part 2: Hot extraction","Papier, carton et pâtes — Détermination du pH des extraits aqueux — Partie 2: Extraction à chaud",2012-10-29,2,"['85.060','85.040']",ISO/TC 6,9599,[41369],[77947],"['en','fr']",7,"<p>This part of ISO 6588 specifies a method for the determination of the pH-value defined by the electrolytes extractable by hot water from a sample of paper, board or pulp.</p><p>This part of ISO 6588 is applicable to all kinds of paper, board and pulp.</p><p>As the quantity of extractable ionic material approaches zero, as in the case of highly purified pulps, the precision of the method becomes

77947,IS,,ISO 6588-2:2020,"Paper, board and pulps — Determination of pH of aqueous extracts — Part 2: Hot extraction","Papier, carton et pâtes — Détermination du pH des extraits aqueux — Partie 2: Extraction à chaud",2020-03-04,3,"['85.060','85.040']",ISO/TC 6,9599,[59784],[83251],"['en','fr']",7,"<p>This document specifies a method for the determination of the pH-value defined by the electrolytes extractable by hot water from a sample of paper, board or pulp.</p><p>This document is applicable to all kinds of paper, board and pulp.</p><p>As the quantity of extractable ionic material approaches zero, as in the case of highly purified pulps, the precision of the method becomes poor because of

4814,IS,,ISO 659:1979,"Oilseeds — Determination of hexane extract (or light petroleum extract), called 'oil content'","Graines oléagineuses — Détermination de l'extrait à l'hexane (ou à l'éther de pétrole), dit 'teneur en huile'",1979-08-01,1,['67.200.20'],ISO/TC 34/SC 2,9599,,[4815],"['en','fr']",5,

4815,IS,,ISO 659:1988,"Oilseeds — Determination of hexane extract (or light petroleum extract), called 'oil content'","Graines oléagineuses — Détermination de l'extrait à l'hexane (ou à l'éther de pétrole), dit 'teneur en huile'",1988-02-18,2,['67.200.20'],ISO/TC 34/SC 2,9599,[4814],[23297],"['en','fr']",5,

23297,IS,,ISO 659:1998,Oilseeds — Determination of oil content (Reference method),Graines oléagineuses — Détermination de la teneur en huile (Méthode de référence),1998-06-04,3,['67.200.20'],ISO/TC 34/SC 2,9599,[4815],[43169],"['en','fr']",13,

12996,IS,,ISO 6590-1:1983,Packaging — Sacks — Vocabulary and types — Part 1: Paper sacks,Emballages — Sacs — Vocabulaire et types — Partie 1: Sacs en papier,1983-12-01,1,"['55.080','01.040.55']",ISO/TC 122/SC 3,9599,,[87607],"['en','fr','ru']",23,"<p>This part of ISO 6590 defines terms commonly used in paper sack manufacture. It refers to single- and multi-ply sacks made from paper; it does not refer to bags for the retail trade. It specifies types of sacks, constructional details, materials and describes parts of a sack. It delivers alphabetical indices in three languages.</p>"

12998,IS,,ISO 6591-1:1984,Packaging — Sacks — Description and method of measurement — Part 1: Empty paper sacks,Emballages — Sacs — Description et méthode de mesurage — Partie 1: Sacs vides en papier,1984-08-01,1,['55.080'],ISO/TC 122/SC 3,9599,,[90432],"['en','fr']",5,"<p>Description and dimensional designation of paper sacks are given by ten figures. Equipment, sampling, procedure and test report for the method of measurement are specified.</p>"

13000,IS,,ISO 6592:1985,Information processing — Guidelines for the documentation of computer-based application systems,Traitement de l'information — Principes généraux relatifs à la documentation des systèmes d'application informatisés,1985-11-28,1,['35.080'],ISO/IEC JTC 1/SC 7,9599,,[26732],"['en','fr']",17,

13002,IS,,ISO 6594:1983,Cast iron drainage pipes and fittings — Spigot series,Tuyaux et raccords salubres en fonte — Série à bouts unis,1983-12-01,1,"['91.140.80','77.140.75']",ISO/TC 5/SC 2,9599,,[35248],"['en','fr']",12,"<p>Comprises three sections: technical specification, dimensions and masses, control testing and test methods. Several figures illustrate the fittings. The range of nominal sizes is as follows: 50 - 70 - 75 - 100 - 125 - 150 - 200 - 250 - 300.</p>"

13004,IS,,ISO 6596-1:1982,"Information processing — Data interchange on 130 mm (5.25 in) flexible disk cartridges using two-frequency recording at 7 958 ftprad on one side — Part 1: Dimensional, physical and magnetic characteristics","Traitement de l'information — Échange d'information sur cartouches à disquette de 130 mm (5,25 in) utilisant un enregistrement à double fréquence à 7 958 ftprad sur une face — Partie 1: Caractéristiques dimensionnelles, physiques et magnétiques",1982-12-01,1,['35.220.21'],ISO/IEC JTC 1,9599,,[13005],"['en','fr']",16,

13007,IS,,ISO 6597:1980,Road vehicles — Passenger car braking systems — Measurement of the braking performance,Véhicules routiers — Systèmes de freinage des voitures particulières —Mesurage des performances de freinage,1980-08-01,1,['43.040.40'],ISO/TC 22,9599,,[13008],"['en','fr']",10,

13008,IS,,ISO 6597:1991,Road vehicles — Hydraulic braking systems — Measurement of braking performance,Véhicules routiers — Dispositifs de freinage à transmission hydraulique — Mesurage des performances de freinage,1991-10-10,2,['43.040.40'],ISO/TC 22,9599,[13007],[27129],"['en','fr']",19,<p>Specifies the test method for braking systems of vehicles of categories M and N according to UN-ECE Regulation No. 13. This second edition cancels and replaces the first edition (1980). Annex A forms an integral part of this standard.</p>

27129,IS,,ISO 6597:2002,Road vehicles — Motor vehicles with hydraulic braking systems with and without antilock device — Measurement of braking performance,Véhicules routiers — Véhicules à moteur avec dispositif de freinage hydraulique avec et sans dispositif antiblocage — Mesurage des performances de freinage,2002-11-27,3,['43.040.40'],ISO/TC 22,9599,[13008],[36969],"['en','fr']",42,<p>ISO 6597specifies the method of testing the hydraulic braking systems of vehicles of categories M and N (with and without antilock device) which are built to comply with ECE-R 13/09 without supplements.</p><p>Hydraulic braking systems include vacuum-assisted and power hydraulic-assisted braking systems as wel

13010,IS,,ISO 6599-1:1983,Packaging — Sacks — Conditioning for testing — Part 1: Paper sacks,Emballages — Sacs — Conditionnement pour essais — Partie 1: Sacs en papier,1983-04-01,1,['55.080'],ISO/TC 122/SC 3,9599,,[92308],"['en','fr']",2,"<p>The principle consists in exposure of empty sacks to a conditioning atmosphere so that a state of temperature and moisture content equilibrium is reached between the sacks and this atmosphere. Conditioning atmospheres ar described by a table. Equipment, procedure and test report are specified.</p>"

4816,IS,,ISO 660:1983,Animal and vegetable fats and oils — Determination of acid value and of acidity,Corps gras d'origines animale et végétale — Détermination de l'indice d'acide et de l'acidité,1983-11-01,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[4817],"['en','fr']",4,

4817,IS,,ISO 660:1996,Animal and vegetable fats and oils — Determination of acid value and acidity,Corps gras d'origines animale et végétale — Détermination de l'indice d'acide et de l'acidité,1996-05-09,2,['67.200.10'],ISO/TC 34/SC 11,9599,[4816],[44879],"['en','fr']",8,<p>Describes two titrimetric methods and one potentiometric method for the determination of acidity (acid value) in animal and vegetable fats and oils. The methods are not applicable to waxes. Replaces the first edition.</p>

36169,IS,Amd,ISO 660:1996/Amd 1:2003,Animal and vegetable fats and oils — Determination of acid value and acidity — Amendment 1: Precision data for virgin olive oil,Corps gras d'origines animale et végétale — Détermination de l'indice d'acide et de l'acidité — Amendement 1: Données de fidélité relatives à l'huile d'olive vierge,2003-03-11,2,['67.200.10'],ISO/TC 34/SC 11,9599,,[44879],"['en','fr']",2,

44879,IS,,ISO 660:2009,Animal and vegetable fats and oils — Determination of acid value and acidity,Corps gras d'origines animale et végétale — Détermination de l'indice d'acide et de l'acidité,2009-06-09,3,['67.200.10'],ISO/TC 34/SC 11,9599,"[36169,4817]",[75594],"['en','fr','ru']",9,"<p>ISO 660:2009 specifies three methods (two titrimetric and one potentiometric) for the determination of the acidity in animal and vegetable fats and oils. The acidity is expressed preferably as acid value, or alternatively as acidity calculated conventionally.</p><p>ISO 660:2009 is applicable to refined and crude vegetable or animal fats and oils, soap stock fatty acids or technical fatty acids. The methods

13011,IS,,ISO 6600:1980,Ductile iron pipes — Centrifugal cement mortar lining — Composition controls of freshly applied mortar,Tuyaux en fonte ductile — Revêtement interne au mortier de ciment centrifugé — Contrôles de composition du mortier fraîchement appliqué,1980-04-01,1,"['93.025','77.140.75','91.140.60']",ISO/TC 5/SC 2,9599,,[35245],"['en','fr']",2,<p>Specifies a certain number of methods used for controls of mortar linings complying with requirements of ISO 4179 and applied csntrifugally on the inner surface of pipes intended for transporting water under pressure as defined in ISO 2531. Describes the drying method and the xylol method.</p>

13012,IS,,ISO 6601:1987,Plastics — Friction and wear by sliding — Identification of test parameters,Plastiques — Frottement et usure par glissement — Identification des paramètres d'essai,1987-11-26,1,['83.080.01'],ISO/TC 61/SC 2,9599,,[34803],"['en','fr']",5,<p>Identifies the parameters associated with the friction and wear of plastics and the conditions that the test methods should address to determine these characteritics. It is intended to provide a basis for further International Standards dealing with friction and wear test methods and specifications of materials.</p>

13013,IS,,ISO 6602:1985,Plastics — Determination of flexural creep by three-point loading,Plastiques — Détermination du fluage en flexion par sollicitation en trois points,1985-07-11,1,['83.080'],ISO/TC 61/SC 2,9599,,"[5302,5303]","['en','fr']",6,

13015,IS,,ISO 6603-1:1985,Plastics — Determination of multiaxial impact behaviour of rigid plastics — Part 1: Falling dart method,Plastiques — Détermination du comportement des plastiques rigides sous un choc multiaxial — Partie 1: Essai par chute de projectile,1985-02-21,1,['83.080.01'],ISO/TC 61/SC 2,9599,,[26800],"['en','fr']",14,

13016,IS,,ISO 6603-2:1989,Plastics — Determination of multiaxial impact behaviour of rigid plastics — Part 2: Instrumented puncture test,Plastiques — Détermination du comportement des plastiques rigides sous un choc multiaxial — Partie 2: Essai par perforation instrumentée,1989-12-14,1,['83.080.01'],ISO/TC 61/SC 2,9599,,[25172],"['en','fr']",12,

25172,IS,,ISO 6603-2:2000,Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing,Plastiques — Détermination du comportement des plastiques rigides perforés sous l'effet d'un choc — Partie 2: Essais de choc instrumentés,2000-09-21,2,['83.080.01'],ISO/TC 61/SC 2,9599,[13016],[82175],"['en','fr']",23,

13018,IS,,ISO 6605:1986,Hydraulic fluid power — Hose assemblies — Method of test,Transmissions hydrauliques — Flexibles de raccordement — Méthode d'essai,1986-03-20,1,"['23.100.40','83.140.40']",ISO/TC 131/SC 4,9599,,"[36659,25458]","['en','fr']",6,"<p>Gives methods for testing and evaluating performance of hose assemblies (hose and attached end fittings) used in hydraulic systems. Specific tests and performance criteria for evaluating hose assemblies used in hydraulic service are in accordance with the requirements for hose in ISO 1436, ISO 3862, ISO 3949 and ISO 4079. Further establishes a uniform means of testing and evaluating performance of hose assemblies.</p>"

36659,IS,,ISO 6605:2002,Hydraulic fluid power — Hoses and hose assemblies — Test methods,Transmissions hydrauliques — Tuyaux et ensembles flexibles — Méthodes d'essai,2002-11-01,2,"['23.100.40','83.140.40']",ISO/TC 131/SC 4,9599,[13018],[67357],"['en','fr']",11,<p>ISO 6605:2002 specifies uniform test methods for evaluating the performance of hoses and hose assemblies (hoses and attached hose fittings) used in hydraulic fluid power systems.</p><p>Specific tests and performance criteria for evaluating hoses and hose assemblies used in hydraulic applications are in accordance with the requirements of the respective product (hoses or hose fitting) specifications.</p>

4818,IS,,ISO 661:1980,Animal and vegetable fats and oils — Preparation of test sample,Corps gras d'origines animale et végétale — Préparation de l'échantillon pour essai,1980-09-01,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[4819],"['en','fr']",2,

4819,IS,,ISO 661:1989,Animal and vegetable fats and oils — Preparation of test sample,Corps gras d'origines animale et végétale — Préparation de l'échantillon pour essai,1989-06-15,2,['67.200.10'],ISO/TC 34/SC 11,9599,[4818],[38145],"['en','fr']",2,"<p>The method is not applicable to emulsified fats such as butter, margarine, mayonnaise, ect. The method consists in mixing of the fatty matter, heated, if necessary, to an appropriate temperature, then, if required, separating of insoluble substances by filtration and removing of water by drying with anhydrous sodium sulfate.</p>"

13022,IS,,ISO 6610:1992,Milk and milk products — Enumeration of colony-forming units of micro-organisms — Colony-count technique at 30 degrees C,Lait et produits laitiers — Dénombrement des unités formant colonie de micro-organismes — Comptage des colonies à 30 degrés C,1992-01-23,1,['07.100.30'],ISO/TC 34/SC 5,9599,,[29747],"['en','fr']",5,"<p>Specifies the principle, the diluents and culture medium, the apparatus and glassware, the sampling and procedure, the expression of results, the repeatability and the test report.</p>"

13023,IS,,ISO 6611:1992,Milk and milk products — Enumeration of colony-forming units of yeasts and/or moulds — Colony-count technique at 25 degrees C,Lait et produits laitiers — Dénombrement des unités formant colonie de levures et/ou moisissures — Comptage des colonies à 25 degrés C,1992-01-30,1,['07.100.30'],ISO/TC 34/SC 5,9599,,[40473],"['en','fr']",6,"<p>Specifies the principle, the diluents and culture medium, the apparatus and glassware, the sampling and procedure, the expression of results, the repeatability and the test report.</p>"

13024,IS,,ISO 6612:1980,Windows and door height windows — Wind resistance tests,Fenêtres et portes-fenêtres — Essais de résistance au vent,1980-10-01,1,['91.060.50'],ISO/TC 162,9599,,"[83473,35487]","['en','fr']",4,

13025,IS,,ISO 6613:1980,Windows and door height windows — Air permeability test,Fenêtres et portes-fenêtres — Essai de perméabilité à l'air,1980-10-01,1,['91.060.50'],ISO/TC 162,9599,,"[35488,83474]","['en','fr']",3,

13026,IS,,ISO 6614:1983,Petroleum oils and synthetic fluids — Determination of demulsibility characteristics,Huiles de pétrole et fluides synthétiques — Détermination des caractéristiques de désémulsion,1983-10-01,1,['75.080'],ISO/TC 28,9599,,[20869],"['en','fr']",4,

13027,IS,,ISO 6615:1983,Petroleum products — Determination of carbon residue — Conradson method,Produits pétroliers — Détermination du résidu de carbone — Méthode Conradson,1983-10-01,1,['75.080'],ISO/TC 28,9599,,[20865],"['en','fr']",7,

13030,IS,,ISO 6618:1987,Petroleum products and lubricants — Neutralization number — Colour-indicator titration method,Produits pétroliers et lubrifiants — Indice de neutralisation — Méthode par titrage en présence d'indicateurs colorés,1987-12-17,1,['75.080'],ISO/TC 28,9599,,[24802],"['en','fr']",7,

4820,IS,,ISO 662:1980,Animal and vegetable fats and oils — Determination of moisture and volatile matter content,Corps gras d'origines animale et végétale — Détermination de la teneur en eau et en matières volatiles,1980-09-01,1,['67.200.10'],ISO/TC 34/SC 11,9599,[5351],[27493],"['en','fr']",2,

27493,IS,,ISO 662:1998,Animal and vegetable fats and oils — Determination of moisture and volatile matter content,Corps gras d'origines animale et végétale — Détermination de la teneur en eau et en matières volatiles,1998-09-17,2,['67.200.10'],ISO/TC 34/SC 11,9599,[4820],[69592],"['en','fr']",7,

13033,IS,,ISO 6621-1:1986,Internal combustion engines — Piston rings — Part 1: Vocabulary,Moteurs à combustion interne — Segments de piston — Partie 1: Vocabulaire,1986-12-18,1,"['43.060.10','01.040.43']",ISO/TC 22,9599,,"[26892,44467]","['en','fr']",16,"<p>This part defines the most commonly used terms for piston rings. These terms designate either types of piston rings or certain characteristics and phenomena of piston rings. An annex contains a list of equivalent terms in English, French, Russian, German, Spanish, Portuguese and Italian. Some figures illustrate shapes and reference quantities of concern.</p>"

44467,IS,,ISO 6621-1:2007,Internal combustion engines — Piston rings — Part 1: Vocabulary,Moteurs à combustion interne — Segments de piston — Partie 1: Vocabulaire,2007-10-30,2,"['43.060.10','01.040.43']",ISO/TC 22/SC 34,9599,[13033],[67903],['en'],29,<p>ISO 6621-1:2007 defines the most commonly used terms for piston rings. These terms designate either types of piston rings or certain characteristics and phenomena of piston rings.</p><p>The terms and definitions in ISO 6621-1:2007 apply to piston rings for reciprocating internal combustion engines. They may also be used for piston rings of compressors working under analogous conditions.</p>

13034,IS,,ISO 6621-2:1984,Internal combustion engines — Piston rings — Part 2: Inspection measuring principles,Moteurs à combustion interne — Segments de piston — Partie 2: Principes de mesure pour inspection,1984-02-01,1,['43.060.10'],ISO/TC 22,9599,,[38437],"['en','fr']",21,<p>This part defines the measuring principles to be used for measuring piston rings. Applies to piston rings up to and including 200 mm diameter for reciprocating internal combustion piston engines. May be used for piston rings for compressors working under analogous conditions. Several figures illustrate shapes and reference quantities of concern.</p>

38437,IS,,ISO 6621-2:2003,Internal combustion engines — Piston rings — Part 2: Inspection measuring principles,Moteurs à combustion interne — Segments de piston — Partie 2: Principes de mesure pour inspection,2003-11-10,2,['43.060.10'],ISO/TC 22/SC 34,9599,[13034],[70227],['en'],29,<p>ISO 6621-2:2003 specifies the principles to be used in the measuring for inspection purposes of piston rings for both reciprocating internal combustion engines and compressors working under analogous conditions. It is applicable to all such rings of a diameter greater than or equal to 200 mm.</p>

13035,IS,,ISO 6621-3:1983,Internal combustion engines — Piston rings — Part 3: Material specifications,Moteurs à combustion interne — Segments de piston — Partie 3: Spécifications des matériaux,1983-12-01,1,['43.060.10'],ISO/TC 22,9599,,[26893],"['en','fr']",2,

26893,IS,,ISO 6621-3:2000,Internal combustion engines — Piston rings — Part 3: Material specifications,Moteurs à combustion interne — Segments de piston — Partie 3: Spécifications des matériaux,2000-08-31,2,['43.060.10'],ISO/TC 22/SC 34,9599,[13035],[75122],"['en','fr']",3,"<p>This part of ISO 6621 classifies materials intended for the manufacture of piston rings, based on their mechanical</p><p>properties and the stresses the materials are capable of withstanding.</p><p>This part of ISO 6621 is applicable to piston rings for reciprocating internal combustion engines up to and including</p><p>those of 200 mm in diameter. It is also applicable to piston rings of compressors working under simi

13036,IS,,ISO 6621-4:1988,Internal combustion engines — Piston rings — Part 4: General specifications,Moteurs à combustion interne — Segments de piston — Partie 4: Spécifications générales,1988-12-29,1,['43.060.10'],ISO/TC 22,9599,,[38306],"['en','fr']",13,"<p>This part lays down the general characteristics of piston rings, individual dimensional criteria of which are specified as appropriate in the ISO publications cited in clause 0. Provides a system for coding, designation and marking of the piston rings. Applies to all rings up to and including 200 mm diameter covered by the above classification for both reciprocating internal combustion piston engines and compressors.</p>"

38306,IS,,ISO 6621-4:2003,Internal combustion engines — Piston rings — Part 4: General specifications,Moteurs à combustion interne — Segments de piston — Partie 4: Spécifications générales,2003-10-14,2,['43.060.10'],ISO/TC 22,9599,[13036],[59170],['en'],28,"<p>ISO 6621-4:2003 specifies the general characteristics of piston rings for both reciprocating internal combustion engines and compressors (the individual dimensional criteria for these rings are given in the relevant International Standards). It also provides a system for ring coding, designation and marking. It is applicable to all such rings of a diameter greater than or equal to 200 mm.</p>"

59170,IS,,ISO 6621-4:2015,Internal combustion engines — Piston rings — Part 4: General specifications,Moteurs à combustion interne — Segments de piston — Partie 4: Spécifications générales,2015-03-18,3,['43.060.10'],ISO/TC 22/SC 34,9599,[38306],[82621],['en'],28,"<p>ISO 6621-4:2015 specifies the general characteristics of piston rings for reciprocating internal combustion engines for road vehicles and other applications (the individual dimensional criteria for these rings are given in the relevant International Standards). It also provides a system for ring coding, designation, and marking. It is applicable to all such rings of a nominal diameter from 30 mm up to and including 200 mm.</p>" 5

13037,IS,,ISO 6621-5:1988,Internal combustion engines — Piston rings — Part 5: Quality requirements,Moteurs à combustion interne — Segments de piston — Partie 5: Exigences de qualité,1988-12-29,1,['43.060.10'],ISO/TC 22,9599,,"[26895,40891]","['en','fr']",9,<p>Specifies those quality aspects which are capable of definition but not normally found on a drawing specification. Covers single-piece and multi-piece piston rings of various materials. Applies to all rings up to and including 200 mm diameter covered by the above classification for both reciprocating internal combustion piston engines and compressors.</p>

40891,IS,,ISO 6621-5:2005,Internal combustion engines — Piston rings — Part 5: Quality requirements,Moteurs à combustion interne — Segments de piston — Partie 5: Exigences de qualité,2005-10-10,2,['43.060.10'],ISO/TC 22,9599,[13037],[55412],['en'],15,"<p>ISO 6621-5:2005 specifies those quality aspects of piston rings that are capable of definition but not normally found on a drawing specification.</p><p>It covers the following:</p><ul><li>single-piece piston rings of grey cast iron or steel;</li><li>multi-piece piston rings (oil control rings) consisting of cast iron parts and spring components;</li><li>single-piece and multi-piece oil control rings of steel, i.e. oil control rings in the fo

55412,IS,,ISO 6621-5:2013,Internal combustion engines — Piston rings — Part 5: Quality requirements,Moteurs à combustion interne — Segments de piston — Partie 5: Exigences de qualité,2013-09-13,3,['43.060.10'],ISO/TC 22/SC 34,9599,[40891],[68942],['en'],14,"<p>ISO 6621-5:2013 specifies those quality aspects that are capable of definition but not normally found on a drawing specification.</p><p>It is applicable to the following: single-piece piston rings of grey cast iron or steel; multi-piece piston rings (oil control rings) consisting of cast iron parts and spring components; single-piece and multi-piece oil control rings of steel, i.e. oil control rings in the form of strip steel component

13038,IS,,ISO 6622-1:1986,Internal combustion engines — Piston rings — Part 1: Rectangular rings,Moteurs à combustion interne — Segments de piston — Partie 1: Segments rectangulaires,1986-08-21,1,['43.060.10'],ISO/TC 22,9599,,[37348],"['en','fr']",16,"<p>Specifies the essential dimensional features of R-, B- and M-rectangular piston ring types. Dimensional tables 8 and 9 offer the choice of two radial wall thicknesses: 'regular' (table 8) or 'D/22' (table 9). The requirements of this part apply to rectangular rings for reciprocating internal combustion piston engines, up to and including 200 mm diameter. May be used for piston rings for compressors working under similar conditions. Several f

37348,IS,,ISO 6622-1:2003,Internal combustion engines — Piston rings — Part 1: Rectangular rings made of cast iron,Moteurs à combustion interne — Segments de piston — Partie 1: Segments rectangulaires en fonte moulée,2003-12-01,2,['27.020'],ISO/TC 22/SC 34,9599,[13038],[73248],['en'],30,"<p>ISO 6622-1:2003 specifies the essential dimensional features of rectangular rings made of cast iron, types R, B, BA and M, having diameters up to and including 200 mm, used in reciprocating internal combustion piston engines. It is also applicable to piston rings of compressors working under similar conditions. </p>"

38358,IS,,ISO 6622-2:2003,Internal combustion engines — Piston rings — Part 2: Rectangular rings made of steel,Moteurs à combustion interne — Segments de piston — Partie 2: Segments rectangulaires en acier,2003-10-01,1,['43.060.10'],ISO/TC 22,9599,[13039],[55413],['en'],21,"<p>ISO 6622-2:2003 specifies the essential dimensional features of rectangular rings made of steel, types R, RB, BA and M, having diameters of from 30 mm up to and including 160 mm, used in reciprocating internal combustion piston engines. It is also applicable to piston rings of compressors working under similar conditions.</p>"

13040,IS,,ISO 6623:1986,Internal combustion engines — Piston rings — Scraper rings,Moteurs à combustion interne — Segments de piston — Segments racleurs mixtes,1986-08-21,1,['43.060.10'],ISO/TC 22,9599,,"[26897,38432,27318,26899]","['en','fr']",13,"<p>Specifies the essential dimensional features of N-, NM-, E- and EM-scraper piston ring types. Dimension tables 7 and 8 offer the choice of two radial wall thicknesses: 'regular' (table 7) and 'D/22' (table 8). The requirements apply to scraper rings for reciprocating internal combustion piston engines, up to and including 200 mm diameter. May be used for piston rings for compressors working under similar conditions.</p>"

38432,IS,,ISO 6623:2004,Internal combustion engines — Piston rings — Scraper rings made of cast iron,Moteurs à combustion interne — Segments de piston — Segments racleurs mixtes en fonte moulée,2004-01-22,2,['43.060.10'],ISO/TC 22,9599,[13040],[57114],['en'],28,"<p>ISO 6623:2004 specifies the essential dimensional features of scraper rings made of cast iron, types N, NM, E and EM, having diameters of from 30 mm up to and including 200 mm, used in reciprocating internal combustion engines. It is also applicable to piston rings of compressors working under similar conditions.</p>"

13041,IS,,ISO 6624-1:1986,Internal combustion engines — Piston rings — Part 1: Keystone rings,Moteurs à combustion interne — Segments de piston — Partie 1: Segments trapézoïdaux,1986-08-21,1,['43.060.10'],ISO/TC 22,9599,,[26900],"['en','fr']",15,"<p>Specifies the essential dimensional features of T-, TB-, TM-, K-, KB- and KM-keystone piston ring types. The requirements apply to compression rings for reciprocating internal combustion piston engines, up to and including 200 mm diameter. Tabulates dimensions of T-, TB- and TM-keystone rings having 6° (table 7) and K-, KB- and KM-keystone rings having 15° (table 8).</p>"

26900,IS,,ISO 6624-1:2001,Internal combustion engines — Piston rings — Part 1: Keystone rings made of cast iron,Moteurs à combustion interne — Segments de piston — Partie 1: Segments trapézoïdaux en fonte,2001-08-09,2,['43.060.10'],ISO/TC 22/SC 34,9599,[13041],[67904],['en'],26,

38357,IS,,ISO 6624-2:2003,Internal combustion engines — Piston rings — Part 2: Half keystone rings made of cast iron,Moteurs à combustion interne — Segments de piston — Partie 2: Segments demi-trapézoïdaux fabriqués en fonte moulée,2003-09-23,1,['43.060.10'],ISO/TC 22/SC 34,9599,[13042],[59242],['en'],16,"<p>ISO 6624-2:2003 specifies the essential dimensional features of half keystone rings made of cast iron, types HK and HKB, having diameters of from 38 mm up to and including 160 mm, used in reciprocating internal combustion piston engines.</p>"

27929,IS,,ISO 6624-3:2001,Internal combustion engines — Piston rings — Part 3: Keystone rings made of steel,Moteurs à combustion interne — Segments de piston — Partie 3: Segments trapézoïdaux en acier,2001-08-23,1,['43.060.10'],ISO/TC 22/SC 34,9599,,[67905],['en'],24,

27930,IS,,ISO 6624-4:2003,Internal combustion engines — Piston rings — Part 4: Half keystone rings made of steel,Moteurs à combustion interne — Segments de piston — Partie 4: Segments semi-trapézoïdaux en acier,2003-10-01,1,['43.060.10'],ISO/TC 22/SC 34,9599,,[59243],['en'],18,"<p>ISO 6624-4:2003 specifies the essential dimensional features of half keystone rings made of steel, types HK and HKB, having diameters of from 38 mm up to and including 160 mm, used in reciprocating internal combustion piston engines.</p>"

13044,IS,,ISO 6626:1989,Internal combustion engines — Piston rings — Coil-spring-loaded oil control rings,Moteurs à combustion interne — Segments de piston — Segments racleurs régulateurs d'huile mis en charge par ressort hélicoïdal,1989-06-22,1,['43.060.10'],ISO/TC 22/SC 34,9599,,"[82622,68370]","['en','fr']",51,"<p>Specifies the essential dimensions of piston ring types DSF-C, DSF-CNP, SSF, GSF, DSF, DSF-NG and SSF-L coil-spring-loaded oil control rings. The normal range for the axial width of coil-spring-loaded oil control rings (3 to 8 mm inclusive) is divided into 0,5 or 1,0 mm steps. Applies to coil-spring-loaded oil control rings up to and including 200 mm diameter for reciprocating i

37567,IS,,ISO 6626-2:2003,Internal combustion engines — Piston rings — Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron,"Moteurs à combustion interne — Segments de piston — Partie 2: Segments racleurs régulateurs d'huile étroits, en fonte, mis en charge par ressort hélicoïdal",2003-03-26,1,['43.060.10'],ISO/TC 22,9599,,[55414],['en'],24,"<p>ISO 6626-2:2003 specifies the essential dimensional features of coil-spring-loaded oil control rings made of cast iron, types DSF-C, SSF, GSF, DSF and SSF-L. It is applicable to those piston rings in sizes 60 mm to 110 mm, inclusive, for reciprocating internal combustion engines, as well as to those for compressors working un

55414,IS,,ISO 6626-2:2013,Internal combustion engines — Piston rings — Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron,"Moteurs à combustion interne — Segments de piston — Partie 2: Segments racleurs régulateurs d'huile étroits, en fonte, mis en charge par ressort hélicoïdal",2013-07-29,2,['43.060.10'],ISO/TC 22/SC 34,9599,[37567],"[82623,67906]",['en'],36,"<p>ISO 6626-2:2013 specifies the essential dimensional features of coil-spring-loaded oil control rings made of cast iron, types DSF-C, SSF, GSF, DSF, SSF-L, DSF-NG and DSF-CNP. It is applicable to those piston rings in sizes 60 mm to 110 mm, inclusive, for reciprocating internal combustion engines for road

42961,IS,,ISO 6626-3:2008,Internal combustion engines — Piston rings — Part 3: Coil-spring-loaded oil control rings made of steel,"Moteurs à combustion interne — Segments de piston — Partie 3: Segments racleurs régulateurs d'huile, en acier, mis en charge par ressort hélicoïdal",2008-06-03,1,['43.060.10'],ISO/TC 22/SC 34,9599,,[67907],['en'],20,"<p>ISO 6626-3:2008 specifies the essential dimensions of coil-spring-loaded, nitrided oil control rings made of steel, of piston ring types SOR (with R-shaped groove) and SOV (with V-shaped groove).</p><p>ISO 6626-3:2008 applies to coil-spring-loaded, nitrided oil control rings made of steel with a diameter of between 60 mm and 200 mm inclusive for r

26902,IS,,ISO 6627:2000,Internal combustion engines — Piston rings — Expander/segment oil-control rings,Moteurs à combustion interne — Segments de piston — Segments racleurs régulateurs d'huile/expandeurs,2000-09-21,1,['43.060.10'],ISO/TC 22,9599,[13045],[51311],"['en','fr']",13,

51311,IS,,ISO 6627:2011,Internal combustion engines — Piston rings — Expander/segment oil-control rings,Moteurs à combustion interne — Segments de piston — Segments racleurs régulateurs d'huile/Ressorts d'expansion,2011-07-21,2,['43.060.10'],ISO/TC 22/SC 34,9599,[26902],[77324],['en'],15,"<p>ISO 6627:2011 specifies the essential dimensional features of expander/segment oil-control rings, without providing a complete product description (because expander‑spacer design varies from piston-ring manufacturer to piston-ring manufacturer, the interaction between the manufacturer and the client will determine specific design details).</p><p>It applies to expander/segment oil-control rings of nominal

4821,IS,,ISO 663:1981,Animal and vegetable fats and oils — Determination of insoluble impurities content,Corps gras d'origines animale et végétale — Détermination de la teneur en impuretés insolubles,1981-03-01,1,['67.200.10'],ISO/TC 34/SC 11,9599,[5350],[4822],"['en','fr']",2,

4822,IS,,ISO 663:1992,Animal and vegetable fats and oils — Determination of insoluble impurities content,Corps gras d'origines animale et végétale — Détermination de la teneur en impuretés insolubles,1992-10-15,2,['67.200.10'],ISO/TC 34/SC 11,9599,[4821],[33500],"['en','fr']",3,

33500,IS,,ISO 663:2000,Animal and vegetable fats and oils — Determination of insoluble impurities content,Corps gras d'origines animale et végétale — Détermination de la teneur en impuretés insolubles,2000-05-04,3,['67.200.10'],ISO/TC 34/SC 11,9599,"[4822,29489]",[44014],"['en','fr']",7,

44014,IS,,ISO 663:2007,Animal and vegetable fats and oils — Determination of insoluble impurities content,Corps gras d'origines animale et végétale — Détermination de la teneur en impuretés insolubles,2007-02-13,4,['67.200.10'],ISO/TC 34/SC 11,9599,[33500],[71269],"['en','fr','ru']",6,"<p>ISO 663:2007 specifies a method for the determination of the insoluble impurities content of animal and vegetable fats and oils.</p><p>If it is not desired to include soaps (particularly calcium soaps) or oxidized fatty acids in the insoluble impurities content, it is necessary to use a different solvent and procedure. </p>"

13063,IS,,ISO 6639-1:1986,Cereals and pulses — Determination of hidden insect infestation — Part 1: General principles,Céréales et légumineuses — Détermination de l'infestation cachée par les insectes — Partie 1: Principes généraux,1986-11-27,1,['67.060'],ISO/TC 34/SC 4,9599,,"[85799,75727,40519]","['en','fr']",2,"<p>Deals with sampling and methods of detremination. A table shows a summary of the principal characteristics of methods of determination, as referance method, carbon dioxide method, ninhydrin method, flotation method, X-ray method, acoustic method.</p>"

13064,IS,,ISO 6639-2:1986,Cereals and pulses — Determination of hidden insect infestation — Part 2: Sampling,Céréales et légumineuses — Détermination de l'infestation cachée par les insectes — Partie 2: Échantillonnage,1986-11-27,1,['67.060'],ISO/TC 34/SC 4,9599,,"[75728,40520,85402]","['en','fr']",4,"<p>Shows general principles, apparatus, sampling times and places, pre-sampling inspection and identification of lots, sampling of bilk grain, sampling of grain in bags, preparation of laboratory sample, and packing, labelling and dispatch of laboratory samples.</p>"

13066,IS,,ISO 6639-4:1987,Cereals and pulses — Determination of hidden insect infestation — Part 4: Rapid methods,Céréales et légumineuses — Détermination de l'infestation cachée par les insectes — Partie 4: Méthodes rapides,1987-01-29,1,['67.060'],ISO/TC 34/SC 4,9599,[5734],"[75729,85401,40522]","['en','fr']",17,

4823,IS,,ISO 664:1977,Oilseeds — Reduction of contract samples to analysis samples,Graines oléagineuses — Réduction des échantillons pour laboratoire en échantillons pour analyse,1977-10-01,1,['67.200.20'],ISO/TC 34/SC 2,9599,,[4824],"['en','fr']",1,

4824,IS,,ISO 664:1990,Oilseeds — Reduction of laboratory sample to test sample,Graines oléagineuses — Réduction de l'échantillon pour laboratoire en échantillon pour essai,1990-06-20,2,['67.200.20'],ISO/TC 34/SC 2,9599,[4823],[38030],"['en','fr']",2,"<p>The principle of the method consists in dividing of the contract sample (see ISO 542) by suitable means, if necessary after removal of impurities of large size, using one or other of the dividing instruments specified and taking care that the final analysis sample thruly represents the bulk of the contract for sample. A table gives the minimum mass of each analysis sample for 17 species of seed.</p>"

13068,IS,,ISO 6644:1981,Cereals and milled cereal products — Automatic sampling by mechanical means,Céréales et produits de mouture des céréales — Échantillonnage automatique par des moyens mécaniques,1981-06-01,1,['67.060'],ISO/TC 34/SC 4,9599,,"[24554,36816]","['en','fr']",5,"<p>The method applies to the assessment of quality of grains or of milled cereal products moving in bulk, intended for human consumption. It is not applicable to commodities in sachs or packages, to static bulks in wagons, ships, bulk tankers, silos or warehouses, nor does it apply to seed grain. It describes apparatus, location and time of sampling, taking increments, bulk sample, laboratory samples, size, packaging,

36816,IS,,ISO 6644:2002,Flowing cereals and milled cereal products — Automatic sampling by mechanical means,Céréales et produits de mouture des céréales en mouvement — Échantillonnage automatique par des moyens mécaniques,2002-11-22,2,['67.060'],ISO/TC 34/SC 4,9599,[13068],[42165],"['en','fr']",9,"<p>ISO 6644:2002 specifies requirements for the automatic sampling, by mechanical means, of cereals (as grain) or of milled cereal products moving in bulk, for assessment of their quality.</p><p>It is not applicable to commodities in sacks or in packages, to static bulks in wagons, ships, bulk tankers, silos or warehouses. It does not apply to seed grain.</p>"

13070,IS,,ISO 6645:1981,Wheat flour — Determination of dry gluten,Farines de blé — Détermination du gluten sec,1981-02-01,1,['67.060'],ISO/TC 34/SC 4,9599,,"[27889,35864,35865]","['en','fr']",2,<p>The method consists in desiccating and weighing of a ball of wet gluten obtained under the conditions specified in ISO 5531. It may also be used to determine the water content of the wet gluten.</p>

13071,IS,,ISO 6646:1984,Rice — Determination of the yield of husked rice and milled rice,Riz — Détermination des rendements en riz décortiqué et en riz usiné,1984-10-01,1,['67.060'],ISO/TC 34/SC 4,9599,,"[13072,32869]","['en','fr']",3,

32869,IS,,ISO 6646:2000,Rice — Determination of the potential milling yield from paddy and from husked rice,Riz — Détermination des rendements à l'usinage à partir du riz paddy et du riz décortiqué,2000-02-10,2,['67.060'],ISO/TC 34/SC 4,9599,[13071],[51072],"['en','fr']",10,

37572,IS,,ISO 6647-1:2007,Rice — Determination of amylose content — Part 1: Reference method,Riz — Détermination de la teneur en amylose — Partie 1: Méthode de référence,2007-08-16,1,['67.060'],ISO/TC 34/SC 4,9599,,[57293],"['en','fr']",12,"<p>ISO 6647-1:2007 specifies a reference method for the determination of the amylose content of milled rice, non-parboiled. The method is applicable to rice with an amylose mass fraction higher than 5 %.</p><p>ISO 6647-1:2007 can also be used for husked rice, maize, millet and other cereals if the extension of this scope has been validated by the user.</p>"

57293,IS,,ISO 6647-1:2015,Rice — Determination of amylose content — Part 1: Reference method,Riz — Détermination de la teneur en amylose — Partie 1: Méthode de référence,2015-05-11,2,['67.060'],ISO/TC 34/SC 4,9599,[37572],[73669],"['en','fr']",7,"<p>ISO 6647-1:2015 specifies a reference method for determining calibration values for standards that will be used to make a standard curve for the quantification of amylose content in milled, non-parboiled rice in the range of amylose content from 0 % to 30 %.</p>"

37897,IS,,ISO 6647-2:2007,Rice — Determination of amylose content — Part 2: Routine methods,Riz — Détermination de la teneur en amylose — Partie 2: Méthodes de routine,2007-08-16,1,['67.060'],ISO/TC 34/SC 4,9599,,[57294],"['en','fr']",12,"<p>ISO 6647-2:2007 specifies two simplified routine methods for the determination of the amylose mass fraction of milled rice, non-parboiled. The main difference between the two methods is in the dispersion procedure: method A specifies hot, and method B cold, dispersion.</p><p>Both methods are applicable to rice with amylose mass fraction higher than 5 %.</p>"

57294,IS,,ISO 6647-2:2015,Rice — Determination of amylose content — Part 2: Routine methods,Riz — Détermination de la teneur en amylose — Partie 2: Méthodes de routine,2015-05-11,2,['67.060'],ISO/TC 34/SC 4,9599,[37897],[73670],"['en','fr']",9,"<p>ISO 6647-2:2015 specifies a simplified routine method for the determination of the amylose content of milled, non-parboiled rice in the range from 1 % to 30 %. Rice samples for which the amylose content has been determined by the reference method size exclusion chromatography (SEC) are used as standards to generate the calibration curve.</p>"

13074,IS,,ISO 6648:1985,Rice — Evaluation of cooking behaviour using a viscoelastograph,Riz — Évaluation du comportement au cours de la cuisson au moyen du viscoélastographe,1985-08-15,1,['67.060'],ISO/TC 34/SC 4,9599,,[13075],"['en','fr']",3,

4825,IS,,ISO 665:1977,Oilseeds — Determination of moisture and volatile matter content,Graines oléagineuses — Détermination de la teneur en eau et matières volatiles,1977-10-01,1,['67.200.20'],ISO/TC 34/SC 2,9599,,[31099],"['en','fr']",2,

31099,IS,,ISO 665:2000,Oilseeds — Determination of moisture and volatile matter content,Graines oléagineuses — Détermination de la teneur en eau et en matières volatiles,2000-09-07,2,['67.200.20'],ISO/TC 34/SC 2,9599,[4825],"[77995,46180]","['en','fr']",8,

13077,IS,,ISO 6651:1983,Animal feeding stuffs — Determination of aflatoxin B1 content,Aliments des animaux — Dosage de l'aflatoxine B1,1983-04-01,1,['65.120'],ISO/TC 34/SC 10,9599,,[13078],"['en','fr']",8,

13078,IS,,ISO 6651:1987,Animal feeding stuffs — Determination of aflatoxin B1 content,Aliments des animaux — Dosage de l'aflatoxine B1,1987-08-20,2,['65.120'],ISO/TC 34/SC 10,9599,[13077],"[34962,25352]","['en','fr']",8,"<p>Describes two methods of determination for different fields of application. Method A is applicable to simple feeding stuffs while method B can be used for mixed feeding stuffs and for feeding stuffs not covered by method A. Contains information on the principle of determination, reagents and apparatus to be used, sampling, procedure, expression of results and the details to be included in the test report.</p>"

13083,IS,,ISO 6656:1984,Animal and vegetable fats and oils — Determination of polyethylene-type polymers,Corps gras d'origines animale et végétale — Dosage des polymères de type polyéthylène,1984-12-01,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[35662],"['en','fr']",3,"<p>Specifies the reference method. Below 50 mg of polymers per kilogram the presicion of the method is insufficient. The method consists in dissolving of a test portion in chloroform, after acid treatment, then filtrating through a sintered filter crucible, washing the crucible and its content, drying and weighing, followed by extraction of the polymers from the insoluble matter by boiling tetrachloroethylene, drying the crucible w

13086,IS,,ISO 6658:1985,Sensory analysis — Methodology — General guidance,Analyse sensorielle — Méthodologie — Guide général,1985-06-13,1,['67.240'],ISO/TC 34/SC 12,9599,,"[26550,36226]","['en','fr']",14,"<p>The guidance comprises three main parts, covered in clauses 4, 5 and 6. Clause 4 gives 'General requirements'. Clause 5 'Test methods' describes all main tests, under five headings: definitions, application, assessors, procedure, interpretation of results. Clause 6 'Analysis of results' is concerned with the statistical treatment of the results. An annex gives statistical terms.</p>"

36226,IS,,ISO 6658:2005,Sensory analysis — Methodology — General guidance,Analyse sensorielle — Méthodologie — Lignes directrices générales,2005-10-12,2,['67.240'],ISO/TC 34/SC 12,9599,[13086],[65519],"['en','fr']",20,"<p>ISO 6658:2005 gives general guidance on the use of sensory analysis. It describes tests for the examination of foods by sensory analysis, and includes some information on the techniques to be used if statistical analysis of the results is required.</p><p>Generally these tests are intended only for objective sensory analysis. However, if a test can be used for determining preference, this is indicated.</p>"

4826,IS,,ISO 666:1975,Machine tools — Mounting of plain grinding wheels by means of hub flanges,Machines-outils — Montage des meules plates par moyeux-flasques,1975-07-01,1,['25.080.50'],ISO/TC 29,9599,,[2737],"['en','fr']",3,