Withdrawn and superseded ISO standards — page 146 of 246

12901,IS,,ISO 6518-2:1982,Ignition systems — Part 2: Test methods,Systèmes d'allumage — Partie 2: Méthodes d'essai,1982-11-01,1,['43.060.50'],ISO/TC 22,9599,,[20096],"['en','fr']",5,

20096,IS,,ISO 6518-2:1995,Road vehicles — Ignition systems — Part 2: Electrical performance and function test methods,Véhicules routiers — Systèmes d'allumage — Partie 2: Performances électriques et méthodes d'essai de fonctionnement,1995-03-16,2,['43.060.50'],ISO/TC 22/SC 32,9599,[12901],[83186],"['en','fr']",10,<p>Cancels and replaces the first edition (1982). Lays down the methods and test conditions for testing battery-supplied ignition systems for spark-ignited internal combustion engines. Gives two methods of obtaining the results necessary for calculating the system output energy.</p>

27839,IS,Cor,ISO 6518-2:1995/Cor 1:1997,Road vehicles — Ignition systems — Part 2: Electrical performance and function test methods — Technical Corrigendum 1,Véhicules routiers — Systèmes d'allumage — Partie 2: Performances électriques et méthodes d'essai de fonctionnement — Rectificatif technique 1,1997-02-13,2,['43.060.50'],ISO/TC 22/SC 32,9599,,[83186],"['en','fr']",3,<p>Replaces the existing figure 3.</p>

12903,IS,,ISO 6519:1980,Tapers for shaft ends and hubs for fuel injection pumps,Cônes pour bouts d'arbre et accouplement des pompes d'injection,1980-11-01,1,['43.060.40'],ISO/TC 22,9599,,[12902],['en'],2,

12902,IS,,ISO 6519:1993,Diesel engines — Fuel injection pumps — Tapers for shaft ends and hubs,Moteurs diesels — Pompes d'injection de combustible — Cônes pour bouts d'arbre et moyeux,1993-05-27,2,['43.060.40'],ISO/TC 22,9599,[12903],[31210],"['en','fr']",4,<p>Specifies the dimensions and tolerances necessary for interchangeability. The tapered shaft ends and hubs may also be used for other applications without woodruff keys where no specific standards exist.</p>

31210,IS,,ISO 6519:2004,Diesel engines — Fuel injection pumps — Tapers for shaft ends and hubs,Moteurs diesels — Pompes d'injection de combustible — Cônes pour bouts d'arbre et moyeux,2004-03-12,3,['43.060.40'],ISO/TC 22/SC 34,9599,[12902],[64048],['en'],4,"<p>ISO 6519:2004 specifies the dimensions, necessary for interchangeability, of tapers for the shaft ends and hubs of fuel injection pumps on diesel (compression-ignition) engines. The shaft ends and hubs specified can be used either with or without woodruff keys, and for other applications for which no specific standards exist.</p>"

64048,IS,,ISO 6519:2015,Diesel engines — Fuel injection pumps — Tapers for shaft ends and hubs,Moteurs diesels — Pompes d'injection de combustible — Cônes pour bouts d'arbre et moyeux,2015-07-23,4,['43.060.40'],ISO/TC 22/SC 34,9599,[31210],[83992],['en'],4,<p>ISO 6519:2015 specifies the dimensions of tapered shaft ends and hubs of fuel injection pumps and common-rail high pressure pumps for diesel (compression-ignition) engines.</p><p>The specified shaft ends and hubs may be used with or without Woodruff keys.</p><p>NOTE The specified shaft ends and hubs can also be used for other applications where no specific standards exist.</p>

4785,IS,,ISO 652:1975,Enclosed-scale calorimeter thermometers,Thermomètres pour calorimètres à échelle protégée,1975-09-01,1,['17.200.20'],ISO/TC 48,9599,,[74920],"['en','fr']",3,"<p>The specified thermometers are of the mercury-in-glass enclosed-scale type with short range. They are used in bomb calorimetry and for other purposes where an accurate measurement of a change of temperature is required. They are not provided with auxiliary scales and are therefore not suited for measurement of the absolute temperature. The requirements specify material, construction, scale, and accuracy.</p>"

21097,IS,,ISO 6520-1:1998,Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 1: Fusion welding,Soudage et techniques connexes — Classification des défauts géométriques dans les soudures des matières métalliques — Partie 1: Soudage par fusion,1998-10-15,1,['25.160.40'],ISO/TC 44/SC 7,9599,[12904],[40229],"['en','fr']",23,

12904,IS,,ISO 6520:1982,"Classification of imperfections in metallic fusion welds, with explanations","Classification des défauts dans les soudures par fusion des métaux, avec commentaires explicatifs",1982-12-01,1,['25.160.40'],ISO/TC 44/SC 7,9599,,"[21097,2370]","['en','fr']",12,

21098,IS,,ISO 6520-2:2001,Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 2: Welding with pressure,Soudage et techniques connexes — Classification des défauts géométriques dans les soudures des matières métalliques — Partie 2: Soudage avec pression,2001-12-20,1,['25.160.40'],ISO/TC 44/SC 7,9599,,[62521],"['en','fr']",25,

12906,IS,,ISO 6522:1985,Programming languages — PL/I — General purpose subset,Langage de programmation PL/I — Sous-ensemble pour usage général,1985-10-03,1,['35.060'],ISO/IEC JTC 1,9599,,[12907],"['en','fr']",1,

12908,IS,,ISO 6523:1984,Data interchange — Structures for the identification of organizations,Échange de données — Structures pour l'identification des organisations,1984-02-01,1,['35.040.50'],ISO/IEC JTC 1/SC 32,9599,,"[25773,25774]","['en','fr']",9,

22323,IS,Amd,ISO 6523:1984/Amd 1:1994,Data interchange — Structures for the identification of organizations — Amendment 1,Échange de données — Structures pour l'identification des organisations — Amendement 1,1994-04-28,1,['35.040.50'],ISO/IEC JTC 1/SC 32,9599,,"[25773,25774]","['en','fr']",1,

12909,IS,,ISO 6524:1983,Plain bearings — Methods of dimensional control — Peripherical length checking of thin-walled half bearings,Paliers lisses — Méthodes de contrôle dimensionnel — Contrôle de la longueur développée des demi-coussinets minces,1983-12-01,1,['21.100.10'],ISO/TC 123/SC 3,9599,,[12910],"['en','fr']",25,

12910,IS,,ISO 6524:1992,Plain bearings — Thin-walled half-bearings — Checking of peripheral length,Paliers lisses — Demi-coussinets minces — Contrôle de la longueur développée,1992-09-24,2,['21.100.10'],ISO/TC 123/SC 3,9599,[12909],[56709],"['en','fr']",29,"<p>Specifies two methods of checking the measuring equipment and gauging tools necessary for measuring the peripheral length (or nip or crush) of thin-walled half-bearings that are flexible and, in the free condition, do not conform to a cylindrical profile. Method A is based on applying the checking load via the measuring head to one joint face, method B on applying two (different) checking loads via the measuring head to both joint face

12911,IS,,ISO 6525:1983,Plain bearings — Ring type thrust washers made from strip — Dimensions and tolerances,Paliers lisses — Rondelles de butée faites à partir de matériaux en bande — Dimensions et tolérances,1983-12-01,1,['21.100.10'],ISO/TC 123/SC 3,9599,,[68629],"['en','fr']",4,<p>Specifies a range of thrust washers for general purpose use with wrapped bushes. Applies to thrust washers having inside diameters from 6 to 80 mm. It ist not expected that all the sizes listed will be available from stock but adoption of standard sizes should lead to economies in tooling costs.</p>

12912,IS,,ISO 6526:1983,Plain bearings — Pressed bimetallic half thrust washers — Features and tolerances,Paliers lisses — Demi-flasques de butée bimétalliques découpés à la presse — Caractéristiques et tolérances,1983-12-01,1,['21.100.10'],ISO/TC 123/SC 3,9599,,[68628],"['en','fr']",6,"<p>Specifies the main features and tolerances for pressed bimetallic half thrust washers having an outside diameter up to 160 mm. Gives symbols, tolerances for diameters and for heights, total thickness, locating lug, grooves, joint faces, fillet radii, chamfers, flatness as well as surface roughness.</p>"

12913,IS,,ISO 6527:1982,Nuclear power plants — Reliability data exchange — General guidelines,Centrales nucléaires — Échange de données de fiabilité — Critères généraux,1982-10-01,1,['27.120.20'],ISO/TC 85/SC 6,9599,,[81450],"['en','fr']",10,<p>Identifies the typical parameters of a component that permit it to be characterized unequivocally and to allow the corresponding reliability data to be associated with those of other components having equivalent typical parameters. Parameters refer to technical characteristics including the physical principle of operation and quality level and to actual operating conditions and maintenance and test intervals. Data may be represented both in a historic

12914,IS,,ISO 6528-1:1984,Rubber — Determination of total sulphur content — Part 1: Oxygen combustion flask method,Caoutchouc — Dosage du soufre total — Partie 1: Méthode par combustion dans une fiole d'oxygène,1984-01-01,1,['83.060'],ISO/TC 45,9599,,[2222],"['en','fr']",8,

12915,IS,,ISO 6528-2:1983,Rubber — Determination of total sulfur content — Part 2: Sodium peroxide fusion method,Caoutchouc — Dosage du soufre total — Partie 2: Méthode par fusion au peroxyde de sodium,1983-11-01,1,['83.060'],ISO/TC 45,9599,,[12916],"['en','fr']",3,

12918,IS,,ISO 6529:1990,Protective clothing — Protection against liquid chemicals — Determination of resistance of air-impermeable materials to permeation by liquids,Vêtements de protection — Protection contre les produits chimiques liquides — Détermination de la résistance des matériaux imperméables à l'air à la transmission de liquides,1990-10-25,1,['13.340.10'],ISO/TC 94/SC 13,9599,,[29743],"['en','fr']",8,"<p>Describes a laboratory test method that enables an assessment to be made of the resistance to permeation by liquids afforded by clothing materials, used for industrial and agricultural applications. The test does not necessarily simulate conditions that may occur in practice.</p>" 1

29743,IS,,ISO 6529:2001,Protective clothing — Protection against chemicals — Determination of resistance of protective clothing materials to permeation by liquids and gases,Vêtements de protection — Protection contre les produits chimiques — Détermination de la résistance des matériaux utilisés pour la confection des vêtements de protection à la perméation par des liquides et des gaz,2001-10-25,2,['13.340.10'],ISO/TC 94/SC 13,9599,[12918],[44800],"['en','fr']",29,

44800,IS,,ISO 6529:2013,Protective clothing — Protection against chemicals — Determination of resistance of protective clothing materials to permeation by liquids and gases,Vêtements de protection — Protection contre les produits chimiques — Détermination de la résistance des matériaux utilisés pour la confection des vêtements de protection à la perméation par des liquides et des gaz,2013-02-21,3,['13.340.10'],ISO/TC 94/SC 13,9599,[29743],"[75867,83924]","['en','fr']",45,"<p>ISO 6529:2013 describes laboratory test methods to determine the resistance of materials used in protective clothing, including gloves and including footwear, when the footwear is an integral part of the clothing, to per

4786,IS,,ISO 653:1980,Long solid-stem thermometers for precision use,"Thermomètres de précision, sur tige, type long",1980-10-01,1,['17.200.20'],ISO/TC 48,9599,,[74921],"['en','fr']",7,"<p>The requirements specify a basic series of liquid-in-glass solid-stem thermometers not exceeding 375 mm in length for accurate measurement of temperature. Temperature scale, materials and construction, marking, and accuracy are described. The annex deals with a method of determing change in zero indication.</p>"

12919,IS,,ISO 6530:1980,Clothing for limited protection against dangerous liquid chemicals — Resistance to penetration — Marking,Vêtements assurant une protection limitée contre les produits chimiques liquides dangereux - Résistance à la pénétration — Marquage,1980-08-01,1,['13.340.10'],ISO/TC 94,9599,,[12920],"['en','fr']",6,

12920,IS,,ISO 6530:1990,Protective clothing — Protection against liquid chemicals — Determination of resistance of materials to penetration by liquids,Vêtements de protection — Protection contre les produits chimiques liquides — Détermination de la résistance des matériaux à la pénétration des liquides,1990-07-05,2,['13.340.10'],ISO/TC 94/SC 13,9599,[12919],[38303],"['en','fr']",4,"<p>Defines the characteristics of resistance of clothing, the test method for their assessment, the marking requirements. Such clothing is for use in operations with chemicals in industry, agriculture and laboratories. The purpose is to provide protection against occasional exposure to droplets or small drops, a b

12921,IS,,ISO 6531:1982,Machinery for forestry — Portable chain saws — Vocabulary,Matériel forestier — Scies à chaîne portatives — Vocabulaire,1982-10-01,1,"['65.060.80','01.040.65']",ISO/TC 23/SC 17,9599,,[25133],"['en','fr','ru']",10,

25133,IS,,ISO 6531:1999,Machinery for forestry — Portable hand-held chain-saws — Vocabulary,Matériel forestier — Scies à chaîne portatives — Vocabulaire,1999-08-12,2,"['65.060.80','01.040.65']",ISO/TC 23/SC 17,9599,[12921],[43375],"['en','fr','ru']",17,

43375,IS,,ISO 6531:2008,Machinery for forestry — Portable chain-saws — Vocabulary,Matériel forestier — Scies à chaîne portatives — Vocabulaire,2008-07-21,3,"['65.060.80','01.040.65']",ISO/TC 23/SC 17,9599,[25133],[69739],"['en','fr','ru']",22,"<p>ISO 6531:2008 defines terms relating to the mechanical aspects of portable chain-saws, chains and guide bars.</p>"

69739,IS,,ISO 6531:2017,Machinery for forestry — Portable chain-saws — Vocabulary,Matériel forestier — Scies à chaîne portatives — Vocabulaire,2017-02-27,4,"['65.060.80','01.040.65']",ISO/TC 23/SC 17,9599,[43375],[85994],"['en','fr']",11,"<p>ISO 6531:2017 defines terms relating to the mechanical aspects of portable chain-saws, saw-chain and guide bars.</p><p>The chain-saw positions are shown in Annex A.</p>"

12922,IS,,ISO 6532:1982,Machinery for forestry — Portable chain saws — Technical data,Machines forestières — Scies à chaîne portatives — Données techniques,1982-07-01,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[12923],"['en','fr']",2,

12923,IS,,ISO 6532:1993,Portable chain-saws — Technical data,Scies à chaîne portatives — Données techniques,1993-11-25,2,['65.060.80'],ISO/TC 23/SC 17,9599,[12922],[43266],"['en','fr']",3,"<p>Lays down the technical data to be specified for portable, hand-held chain-saws.</p>"

12924,IS,,ISO 6533:1983,Forestry machinery — Portable chain saws — Front hand guard — Dimensions,Machines forestières — Scies à chaîne portatives — Dispositif de protection de la main tenant la poignée avant — Dimensions,1983-08-01,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[12925],"['en','fr']",3,

12925,IS,,ISO 6533:1993,Forestry machinery — Portable chain-saw front hand-guard — Dimensions,Machines forestières — Dispositif de protection de la main tenant la poignée avant des scies à chaîne portatives — Dimensions,1993-06-02,2,['65.060.80'],ISO/TC 23/SC 17,9599,[12924],[26890],"['en','fr']",3,"<p>Specifies the dimensions and clearances for primarily combustion-engine-driven saws. This ensures the necessary safety for the operator, in protecting him from a moving chain.</p>"

26890,IS,,ISO 6533:2001,Forestry machinery — Portable chain-saw front hand-guard — Dimensions and clearances,Machines forestières — Protecteur de la main tenant la poignée avant des scies à chaîne portatives — Dimensions et dégagements,2001-12-20,3,['65.060.80'],ISO/TC 23/SC 17,9599,[12925],"[54914,46089]","['en','fr']",6,

54914,IS,,ISO 6533:2012,Forestry machinery — Portable chain-saw front hand-guard — Dimensions and clearances,Machines forestières — Protecteur de la main tenant la poignée avant des scies à chaîne portatives — Dimensions et dégagements,2012-09-19,4,['65.060.80'],ISO/TC 23/SC 17,9599,[26890],[75690],"['en','fr']",8,"<p>This International Standard specifies the dimensions and clearances for front hand-guards and their openings on portable hand-held chain-saws. These dimensions and clearances ensure the necessary safety provided by the hand-guard, which serves as both a shield between the operator's hand and the saw chain and as an actuator for manually operated chain brakes. For chain-saws wit

12926,IS,,ISO 6534:1985,Forestry machinery — Portable chain-saws — Front hand-guard — Determination of strength,Matériel forestier — Scies à chaîne portatives — Dispositif de protection de la main tenant la poignée avant — Détermination de la solidité,1985-08-29,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[12927],"['en','fr']",2,

12927,IS,,ISO 6534:1992,Portable chain-saw — Hand-guards — Mechanical strength,Scies à chaîne portatives — Protections des mains — Résistance mécanique,1992-05-28,2,['65.060.80'],ISO/TC 23/SC 17,9599,[12926],[43367],"['en','fr']",3,<p>Specifies the mechanical strength requirements relating to the front and rear hand-guards of hand-held combustion engine chain-saws for use primarily in forestry. It also gives the corresponding test methods.</p>

43367,IS,,ISO 6534:2007,Forestry machinery — Portable chain-saw hand-guards — Mechanical strength,Matériel forestier — Protections des mains des scies à chaîne portatives — Résistance mécanique,2007-05-03,3,['65.060.80'],ISO/TC 23/SC 17,9599,[12927],"[83995,57438]","['en','fr']",5,<p>ISO 6534:2007 specifies the mechanical strength requirements relating to the front and rear hand-guards of portable hand-held combustion engine chain-saws for use primarily in forestry. It also gives the corresponding test methods.</p>

60253,IS,Amd,ISO 6534:2007/Amd 1:2012,Forestry machinery — Portable chain-saw hand-guards — Mechanical strength — Amendment 1,Matériel forestier — Protections des mains des scies à chaîne portatives — Résistance mécanique — Amendement 1,2012-07-31,3,['65.060.80'],ISO/TC 23/SC 17,9599,,[83995],"['en','fr']",2,

12928,IS,,ISO 6535:1983,Forestry machinery — Portable chain saws — Chain brake — Performance,Machines forestières — Scies à chaîne portatives — Freins de chaîne — Performances,1983-06-01,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[12929],"['en','fr']",2,

12929,IS,,ISO 6535:1991,Portable chain-saws — Chain brake performance,Scies à chaîne portatives — Performances du frein de chaîne,1991-12-12,2,['65.060.80'],ISO/TC 23/SC 17,9599,[12928],[43554],"['en','fr']",2,<p>Specifies methods for measuring the braking time and release force of manually-operated chain brakes. Gives performance recommendations.</p>

40908,IS,Cor,ISO 6535:1991/Cor 1:2004,Portable chain-saws — Chain brake performance — Technical Corrigendum 1,Scies à chaîne portatives — Performances du frein de chaîne — Rectificatif technique 1,2004-09-13,2,['65.060.80'],ISO/TC 23/SC 17,9599,,[43554],"['en','fr']",1,

43554,IS,,ISO 6535:2008,Portable chain-saws — Chain brake performance,Scies à chaîne portatives — Performance du frein de chaîne,2008-05-21,3,['65.060.80'],ISO/TC 23/SC 17,9599,"[40908,12929]",[61869],"['en','fr']",4,<p>ISO 6535:2008 specifies methods for measuring the braking time and release force of manually operated chain brakes on portable handheld chain-saws.</p>

12932,IS,,ISO 6538:1982,"Cassia (type China, type Indonesia and type Viet Nam), whole and ground (powdered) — Specification","Cannelle (type Chine, type Indonésie et type Viet Nam) entière et en poudre — Spécifications",1982-03-01,1,['67.220.10'],ISO/TC 34/SC 7,9599,,[22118],"['en','fr']",4,

12933,IS,,ISO 6539:1983,"Cinnamon (type Sri Lanka (Ceylon), type Seychelles and type Madagascar), whole or ground (powdered) — Specification","Cannelle (type Sri Lanka (Ceylan), type Seychelles et type Madagascar) entière ou en poudre — Spécifications",1983-04-01,1,['67.220.10'],ISO/TC 34/SC 7,9599,,[22119],"['en','fr']",6,

22119,IS,,ISO 6539:1997,"Cinnamon, Sri Lankan type, Seychelles type and Madagascan type (Cinnamomum zeylanicum Blume) — Specification","Cannelle type Sri Lanka, type Seychelles et type Madagascar (Cinnamomum zeylanicum Blume) — Spécifications",1997-10-30,2,['67.220.10'],ISO/TC 34/SC 7,9599,[12933],[64797],"['en','fr']",7,

4787,IS,,ISO 654:1980,Short solid-stem thermometers for precision use,"Thermomètres de précision, sur tige, type court",1980-10-01,1,['17.200.20'],ISO/TC 48,9599,,[74922],"['en','fr']",6,"<p>A basic series of liquid-in-glass solid-stem termometers not exceeding 250 mm in length for accurate measurement of temperature is specified. Temperature scale, materials, construction, marking and accuracy are described. The annex deals with a method of determing change in zero indication.</p>"

12934,IS,,ISO 6540:1980,Maize — Determination of moisture content (on milled grains and on whole grains),Maïs — Détermination de la teneur en eau (sur grains broyés et sur grains entiers),1980-11-01,1,['67.060'],ISO/TC 34/SC 4,9599,,[75568],"['en','fr']",11,"<p>A section one specifies the reference method. It consists in grinding of sample, if necessery, after pre-conditioning, if required, then drying of a test portion at a temperature between 130 and 133 C under conditions which enable a result to be obtained which is in agreement with that obtained by the absolute method ( prescribed in an annex). A section two specifies the routine method on whole grains. It consists in drying of whole g

12938,IS,,ISO 6544:1981,Hand-held pneumatic assembly tools for installing threaded fasteners — Reaction torque and torque impulse measurements,Outils pneumatiques à main pour l'assemblage d'éléments de fixation filetés — Mesurages du couple de réaction et de l'impulsion de couple,1981-11-01,1,['25.140.10'],ISO/TC 118/SC 3,9599,,[1719],"['en','fr']",7,"<p>Specifies a test method for tools and gives instructions on how measured data should be evaluated and presented. Is directly applicable to assembly torque control tools. In the case of stall type tools, only the reaction torque can be measured. Impacting, pulsing or ratcheting tools are not covered.</p>"

38575,IS,,ISO 6546:2006,Road vehicles — Collection of accident data for evaluation of occupant restraint performance,Véhicules routiers — Recueil de données des accidents pour évaluer les performances de retenue des occupants,2006-05-10,1,['43.020'],ISO/TC 22/SC 36,9599,[12940],[68074],"['en','fr']",10,"<p>ISO 6546:2006 specifies information for the field collection of traffic accident data that is necessary or may assist in the evaluation of occupant restraint systems in passenger cars and trucks. The specific occupant restraints covered by ISO 6546:2006 are seat belts, head restraints, knee protection, airbag systems and child restraint systems. </p><p>ISO 6546:2006 does not cover an asses

12943,IS,,ISO 6549:1980,Road vehicles — Procedure for H-point determination,Véhicules routiers — Procédure de détermination du point H,1980-12-01,1,['43.020'],ISO/TC 22/SC 39,9599,,[12944],"['en','fr']",6,

12944,IS,,ISO 6549:1999,Road vehicles — Procedure for H- and R-point determination,Véhicules routiers — Procédure de détermination des points H et R,1999-12-16,2,['43.020'],ISO/TC 22/SC 39,9599,[12943],[81280],"['en','fr']",9,

4788,IS,,ISO 655:1980,Long enclosed-scale thermometers for precision use,"Thermomètres de précision, à échelle protégée, type long",1980-10-01,1,['17.200.20'],ISO/TC 48,9599,,[74923],"['en','fr']",6,"<p>The requirements specify a series of liquid-in-glass enclosed-scale thermometers, not exceeding 375 mm in length for accurate measurement of temperature. The combination of letters and figures allocated to each thermometer of the series indicating the type is given. Temperature scale, materials, construction, markimg, and accuracy are specified. The annex deals with a method of determing change in the zero indication.</p>"

20089,IS,,ISO 6550-1:1994,"Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 1: M14 x 1,25 glow-plugs","Véhicules routiers — Bougies de préchauffage à fourreau et à siège conique, et leur logement dans la culasse — Partie 1: Bougies M14 x 1,25",1994-12-22,1,['43.060.50'],ISO/TC 22/SC 32,9599,[12946],"[59789,59790,63265]","['en','fr']",3,"<p>Specifies the main characteristics of M14 × 1,25 sheath-type glow-plugs with conical seating and their cylinder head housing, for use with diesel (compression-ignition) engines. Type M14 should not be used for new applications.</p>"

12945,IS,,ISO 6550:1980,"Road vehicles — Glow plugs M 12x1,25 and M 14x1,25 sheath type and cylinder head housing dimensions","Véhicules routiers — Bougies de préchauffage M 12x1,25 et M 14x1,25 type à fourreau et dimensions des logements dans la culasse",1980-10-01,1,['43.060.50'],ISO/TC 22,9599,,[12946],"['en','fr']",3,

12946,IS,,ISO 6550:1989,"Road vehicles — M12 x 1,25 and M14 x 1,25 sheath-type glow-plugs with conical seating and their cylinder head housing","Véhicules routiers — Bougies de préchauffage M12 x 1,25 et M14 x 1,25 du type à fourreau et à siège conique et leur logement dans la culasse",1989-11-02,2,['43.060.50'],ISO/TC 22,9599,[12945],"[20089,12947,20090]","['en','fr']",3,

20090,IS,,ISO 6550-2:1994,"Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 2: M12 x 1,25 glow-plugs","Véhicules routiers — Bougies de préchauffage du type à fourreau et à siège conique, et leur logement dans la culasse — Partie 2: Bougies M12 x 1,25",1994-12-22,1,['43.060.50'],ISO/TC 22/SC 32,9599,[12946],"[59789,59790,63265]","['en','fr']",3,"<p>Specifies the main characteristics of M12 × 1,25 sheath-type glow-plugs with conical seating and their cylinder head housing, for use with diesel (compression-ignition) engines.</p>"

20091,IS,,ISO 6550-3:1996,Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 3: M10 glow-plugs,"Véhicules routiers — Bougies de préchauffage à fourreau et à siège conique, et leur logement dans la culasse — Partie 3: Bougies M10",1996-12-26,1,['43.060.50'],ISO/TC 22,9599,,[30947],"['en','fr']",7,"<p>Specifies the main characteristics of M10 sheath-type glow-plugs with conical seating and their cylinder head-housing, for use with diesel engines.</p>"

30947,IS,,ISO 6550-3:2002,Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 3: M10 glow-plugs,Véhicules routiers — Bougies de préchauffage à fourreau et à siège conique et leur logement dans la culasse — Partie 3: Bougies M10,2002-06-13,2,['43.060.50'],ISO/TC 22,9599,[20091],[42942],"['en','fr']",8,"<p>This part of ISO 6550 specifies the main characteristics of M10 sheath-type glow-plugs with conical seating and their cylinder head housing, for use with diesel (compression-ignition) engines.</p>"

42942,IS,,ISO 6550-3:2009,Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 3: M10 glow-plugs,Véhicules routiers — Bougies de préchauffage à fourreau et à siège conique et leur logement dans la culasse — Partie 3: Bougies M10,2009-01-23,3,['43.060.50'],ISO/TC 22/SC 32,9599,[30947],"[59789,59790,56858,63265]",['en'],10,"<p>ISO 6550-3:2009 specifies the main characteristics of M10 sheath-type glow-plugs with conical seating and their cylinder head housing, for use with diesel (compression-ignition) engines.</p>"

35091,IS,,ISO 6550-4:2005,Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 4: M8 x 1 glow-plugs,"Véhicules routiers — Bougies de préchauffage à fourreau et à siège conique, et leur logement dans la culasse — Partie 4: Bougies M8 x 1",2005-04-25,1,['43.060.50'],ISO/TC 22,9599,,[50144],"['en','fr']",9,"<p>ISO 6550-4:2005 specifies the main characteristics of M8 x 1 sheath-type glow-plugs with conical seating and their housing in the cylinder head, for use with diesel (compression-ignition) engines.</p>"

50144,IS,,ISO 6550-4:2009,Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 4: M8 x 1 glow-plugs,"Véhicules routiers — Bougies de préchauffage à fourreau et à siège conique, et leur logement dans la culasse — Partie 4: Bougies M8 x 1",2009-10-27,2,['43.060.50'],ISO/TC 22/SC 32,9599,[35091],"[59789,65284,59790,63265]",['en'],10,"<p>ISO 6550-4:2009 specifies the main characteristics of M8 x 1 sheath-type glow-plugs with conical seating and their cylinder head housing, for use with diesel (compression-ignition) engines.</p>"

12951,IS,,ISO 6553:1980,Automatic steam traps — Marking,Purgeurs automatiques de vapeurs d'eau — Marquage,1980-10-01,1,['23.060.01'],ISO/TC 153,9599,,[64759],"['en','fr']",1,"<p>The purpose is to establish certain basic requirements for the marking of steam traps, and to give recommendations for additional information markings. Has, in general, to be considered in conjunction with the specific requirements which may be agreed between the partners concerned. Specifies mandatory and optional markings for steam traps.</p>"

12953,IS,,ISO 6555:1981,Shipbuilding — Topping winches,Construction navale — Treuils d'apiquage,1981-03-01,1,['47.020.50'],ISO/TC 8/SC 4,9599,,[12954],"['en','fr']",4,

12955,IS,,ISO 6556:1981,Laboratory glassware — Filter flasks,Verrerie de laboratoire — Fioles à filtrer,1981-07-01,1,['71.040.20'],ISO/TC 48,9599,,[56903],"['en','fr']",5,"<p>The requirements specify a series of capacities from 100 ml to 2000 ml. The construction with material, shape, radius of curvature of base and the vacuum connection are illustrated. The dimensions are tabled and the most important sections of the flask are drawn. The annex specify hydraulic external pressure tests.</p>"

4789,IS,,ISO 656:1980,Short enclosed-scale thermometers for precision use,"Thermomètres de précision, à échelle protégée, type court",1980-10-01,1,['17.200.20'],ISO/TC 48,9599,,[74924],"['en','fr']",6,"<p>A series of liquid-in glass enclosed-scale thermometer, not exceeding 250 mm in length for accurate measurement of temperature is specified. The combination of letters and figures allocated to each thermometer of the series indicating the type is given. Temperature scale, materials, construction, marking and accuracy are specified. The annex deals with a method of determing change in the zero indication.</p>"

12963,IS,,ISO 6561:1983,"Fruits, vegetables and derived products — Determination of cadmium content — Flameless atomic absorption spectrometric method","Fruits, légumes et produits dérivés — Détermination de la teneur en cadmium — Méthode par spectrométrie d'absorption atomique sans flamme",1983-11-01,1,['67.080.01'],ISO/TC 34/SC 3,9599,,"[38286,38285,22904]","['en','fr']",3,"<p>The method consists in decomposing the organic matter as described in ISO 5515, and determining the dissolved cadmium cation with a suitable spectrometer.</p>"

12966,IS,,ISO 6564:1985,Sensory analysis — Methodology — Flavour profile methods,Analyse sensorielle — Méthodologie — Méthodes d'établissement du profil de la flaveur,1985-10-24,1,['67.240'],ISO/TC 34/SC 12,9599,,[12967],"['en','fr']",6,<p>Specification of a family of methods for describing and assessing the flavour of food products by qualified and trained assessors. The methods consists of procedures for describing and assessing in a reproducible way. The seperate attributes contributing to the formation of the overall impression given by the product are identified and their intensity assessed in order to build up a description of the flavour of the product. A annex A gives an example of c

12968,IS,,ISO 6565:1983,"Tobacco and tobacco products — Draw resistance of cigarettes and filter rods — Definitions, standard conditions and general aspects","Tabac et produits du tabac — Résistance au tirage des cigarettes et bâtonnets-filtres — Définitions, conditions normalisées et considérations générales",1983-05-01,1,['65.160'],ISO/TC 126/SC 1,9599,,[22456],"['en','fr']",4,

22456,IS,,ISO 6565:1999,Tobacco and tobacco products — Draw resistance of cigarettes and pressure drop of filter rods — Standard conditions and measurement,Tabac et produits du tabac — Résistance au tirage des cigarettes et perte de charge des bâtonnets-filtres — Conditions normalisées et mesurage,1999-09-23,2,['65.160'],ISO/TC 126/SC 1,9599,[12968],[36227],"['en','fr']",14,

36227,IS,,ISO 6565:2002,Tobacco and tobacco products — Draw resistance of cigarettes and pressure drop of filter rods — Standard conditions and measurement,Tabac et produits du tabac — Résistance au tirage des cigarettes et perte de charge des bâtonnets-filtres — Conditions normalisées et mesurage,2002-05-09,3,['65.160'],ISO/TC 126/SC 1,9599,"[22456,34227]",[52743],"['en','fr']",16,"<p>This International Standard describes a method for the measurement of the draw resistance of cigarettes and pressure drop of filter rods, and specifies the standard conditions applicable to such measurements.</p><p>It is applicable to cigarettes, filter rods and, by extension, to cylindrical tobacco products s

52743,IS,,ISO 6565:2011,Tobacco and tobacco products — Draw resistance of cigarettes and pressure drop of filter rods — Standard conditions and measurement,Tabac et produits du tabac — Résistance au tirage des cigarettes et perte de charge des bâtonnets-filtres — Conditions normalisées et mesurage,2011-09-26,4,['65.160'],ISO/TC 126/SC 1,9599,[36227],[64265],"['en','fr']",21,"<p>ISO 6565:2011 describes a method for the measurement of the draw resistance of cigarettes and pressure drop of filter rods, and specifies the standard conditions applicable to such measurements.</p><p>ISO 6565:2011 is applicable to cigarettes, filter rods and, by extension, to cylindrical tobacco products similar to c

4791,IS,,ISO 657-1:1989,Hot-rolled steel sections — Part 1: Equal-leg angles — Dimensions,Profilés en acier laminés à chaud — Partie 1: Cornières à ailes égales — Dimensions,1989-07-13,1,['77.140.70'],ISO/TC 17/SC 3,9599,,[89683],"['en','fr']",4,<p>This first edition as an International Standard constitues a technical revision of ISO Recommendation R 657-1:1968. ISO 657 consists of 21 parts integrating any shapes of sections. ISO 657-1 specifies dimensions of hot-rolled equal-leg angles.</p>

4802,IS,,ISO 657-11:1980,Hot-rolled steel sections — Part 11: Sloping flange channel sections (Metric series) — Dimensions and sectional properties,Profilés en acier laminés à chaud — Partie 11: Profils en U à ailes inclinées (Série métrique) — Dimensions et caractéristiques rapportées aux axes,1980-09-01,1,['77.140.70'],ISO/TC 17/SC 3,9599,,[89683],"['en','fr']",2,<p>Gives the designation of sloping flange channel sections in an example and the dimensions and sectional properties in a figure and a table.</p>

4804,IS,,ISO 657-14:1982,Hot-rolled steel sections — Part 14: Hot-finished structural hollow sections — Dimensions and sectional properties,"Profilés en acier laminés à chaud — Partie 14: Profils creux de construction, finis à chaud — Dimensions et caractéristiques rapportées aux axes",1982-11-01,2,['77.140.75'],ISO/TC 5/SC 1,9599,,[4805],"['en','fr']",9,

4805,IS,,ISO 657-14:2000,Hot-rolled steel sections — Part 14: Hot-finished structural hollow sections — Dimensions and sectional properties,Profilés en acier laminés à chaud — Partie 14: Profils creux pour la construction finis à chaud — Dimensions et caractéristiques du profil,2000-03-30,3,['77.140.75'],ISO/TC 5/SC 1,9599,[4804],[52310],"['en','fr']",29,

4806,IS,,ISO 657-15:1980,Hot-rolled steel sections — Part 15: Sloping flange beam sections (Metric series) — Dimensions and sectional properties,Profilés en acier laminés à chaud — Partie 15: Poutrelles à ailes inclinées (Série métrique) — Dimensions et caractéristiques rapportées aux axes,1980-09-01,1,['77.140.70'],ISO/TC 17/SC 3,9599,,[89683],"['en','fr']",2,<p>Gives the designation of sloping flange beam sections in an example and the dimensions and sectional properties in a figure and a table.</p>

4793,IS,,ISO 657-2:1989,Hot-rolled steel sections — Part 2: Unequal-leg angles — Dimensions,Profilés en acier laminés à chaud — Partie 2: Cornières à ailes inégales — Dimensions,1989-06-26,1,['77.140.70'],ISO/TC 17/SC 3,9599,,[89683],"['en','fr']",5,<p>This first edition as an International Standard constitues a technical revision of ISO Recommendation R 657-2:1968. ISO 657 consists of 21 parts integrating any shapes of sections. ISO 657-2 specifies dimensions of hot-rolled unequal-leg angles.</p>

4796,IS,,ISO 657-5:1976,Hot-rolled steel sections — Part 5: Equal-leg angles and unequal-leg angles — Tolerances for metric and inch series,Profilés laminés à chaud — Partie 5: Cornières à ailes égales et à ailes inégales — Tolérances pour les séries métrique et inch,1976-11-01,1,['77.140.70'],ISO/TC 17/SC 3,9599,,"[4797,89683]","['en','fr']",3,"<p>Includes tolerances on leg length, on thickness, cutting tolerance for length, tolerances on mass, straightness and out-of-square.</p>"

12973,IS,,ISO 6570-1:1983,Natural gas — Determination of potential hydrocarbon liquid content — Part 1: Principles and general requirements,Gaz naturel — Détermination de la teneur en hydrocarbures liquides potentiels — Partie 1: Principes et prescriptions générales,1983-10-01,1,['75.060'],ISO/TC 193/SC 1,9599,,[32874],"['en','fr']",9,

12974,IS,,ISO 6570-2:1984,Natural gas — Determination of potential hydrocarbon liquid content — Part 2: Weighing method,Gaz naturel — Détermination de la teneur en hydrocarbures liquides potentiels — Partie 2: Méthode par pesée,1984-07-01,1,['75.060'],ISO/TC 193/SC 1,9599,,"[25109,32874]","['en','fr']",7,

12975,IS,,ISO 6570-3:1984,Natural gas — Determination of potential hydrocarbon liquid content — Part 3: Volumetric method,Gaz naturel — Détermination de la teneur en hydrocarbures liquides potentiels — Partie 3: Méthode volumétrique,1984-06-01,1,['75.060'],ISO/TC 193/SC 1,9599,,[25110],"['en','fr']",7,

12976,IS,,ISO 6571:1984,"Spices, condiments and herbs — Determination of volatile oil content","Épices, aromates et herbes — Détermination de la teneur en huiles essentielles",1984-11-01,1,['67.220.10'],ISO/TC 34/SC 7,9599,,[41299],"['en','fr']",4,"<p>Describes a method the principle of which consists in distilling an aqueous suspension of the product and collecting the distillate in a graduated tube containing a measured volume of xylene to fix the volatile oil. After separation of the organic from the aqueous phases the total volume of the organic phase is read and the volatile oil content is calculated after deduction of the volume of xylene. The test parameters for different spices, cond

12980,IS,,ISO 6576:1984,Laurel (Laurus nobilis Linnaeus) — Whole and pounded leaves — Specification,Laurier (Laurus nobilis Linnaeus) — Feuilles entières et brisées — Spécifications,1984-05-01,1,['67.220.10'],ISO/TC 34/SC 7,9599,,"[39016,36679,37090]","['en','fr']",4,"<p>Specifies the requirements for this product with regard to wholesale purposes, describes sampling, methods of test, and packing and marking. Annex A includes recommendations relating to storage and transport conditions while the main producing countries are indicated in Annex B.</p>"

12981,IS,,ISO 6577:1990,"Nutmeg, whole or broken, and mace, whole or in pieces (Myristica fragrans Houttuyn) — Specification",Muscade entière ou brisée et macis entier ou en morceaux (Myristica fragrans Houttuyn) — Spécifications,1990-10-25,1,['67.220.10'],ISO/TC 34/SC 7,9599,,[36680],"['en','fr']",7,<p>Specifies requirements for nutmeg and for mace obtained from the nutmeg tree for wholesale commercial purposes. Does not apply to Papua-type nutmeg and mace (Myristica argentea Warburg). Recommendations relating to storage and transport conditions are given in annex A.</p>

12982,IS,,ISO 6578:1991,Refrigerated hydrocarbon liquids — Static measurement — Calculation procedure,Hydrocarbures liquides réfrigérés — Mesurage statique — Procédure de calcul,1991-11-28,1,['75.180.30'],ISO/TC 28/SC 5,9599,,[69289],"['en','fr']",20,"<p>Specifies the calculations to be made to adjust the volume of a liquid from the conditions at measurement to the equivalent volume of liquid or vapour at a standard temperature and pressure, or to the equivalent mass or energy (calorific content). Annexes A to H form an integral part of this standard.</p>"

69289,IS,,ISO 6578:2017,Refrigerated hydrocarbon liquids — Static measurement — Calculation procedure,Hydrocarbures liquides réfrigérés — Mesurage statique — Procédure de calcul,2017-10-13,2,['75.180.30'],ISO/TC 28/SC 5,9599,[12982],[86923],['en'],25,"<p>ISO 6578:2017 specifies the calculation procedure to convert the volume of liquefied petroleum gas (LPG) and liquefied natural gas (LNG) under the conditions at the time of measurement to the equivalent volume of liquid or vapour at the standard condition, i.e. 15 °C and 101,325 kPaA, or to the equivalent mass or energy (calorific content). It applies to the quantities of refrigerated hydrocarbon liquids stored in or transferred to/from tank

12983,IS,,ISO 6579:1981,Microbiology — General guidance on methods for the detection of Salmonella,Microbiologie — Directives générales concernant les méthodes de recherche des Salmonella,1981-03-01,1,['07.100.30'],ISO/TC 34/SC 9,9599,,"[12985,12984]","['en','fr']",15,

12984,IS,,ISO 6579:1990,Microbiology — General guidance on methods for the detection of Salmonella,Microbiologie — Directives générales concernant les méthodes de recherche des Salmonella,1990-05-31,2,['07.100'],ISO/TC 34/SC 9,9599,[12983],[12985],"['en','fr']",15,

12985,IS,,ISO 6579:1993,Microbiology — General guidance on methods for the detection of Salmonella,Microbiologie — Directives générales concernant les méthodes de recherche des Salmonella,1993-09-02,3,['07.100.30'],ISO/TC 34/SC 9,9599,"[12983,12984]",[29315],"['en','fr']",16,"<p>The methods proposed necessitate four successive stages: pre-enrichment in non-selective liquid medium, enrichment in selective liquid media, plating out and recognition, confirmation. Annex A gives a diagram of the procedure, annex B describes composition and preparation of culture media and reagents, annex C specifies brilliant green.</p>"

29315,IS,,ISO 6579:2002,Microbiology of food and animal feeding stuffs — Horizontal method for the detection of Salmonella spp.,Microbiologie des aliments — Méthode horizontale pour la recherche des Salmonella spp.,2002-08-08,4,['07.100.30'],ISO/TC 34/SC 9,9599,[12985],[56712],"['en','fr']",27,"<p>ISO 6579:2002 specifies a horizontal method for the detection of <i>Salmonella</i>, including <i>Salmonella</i> Typhi and <i>Salmonella</i> Paratyphi.</p><p>It is applicable to products intended for human consumption and the feeding of animals, and to environmental samples in the area of food production and food handling.</p>"

42109,IS,Amd,ISO 6579:2002/Amd 1:2007,Microbiology of food and animal feeding stuffs — Horizontal method for the detection of Salmonella spp. — Amendment 1: Annex D: Detection of Salmonella spp. in animal faeces and in environmental samples from the primary production stage,Microbiologie des aliments — Méthode horizontale pour la recherche des Salmonella spp. — Amendement 1: Annexe D: Recherche des Salmonella spp. dans les matières fécales des animaux et dans des échantillons environnementaux au stade de la production primaire,2007-07-04,4,['07.100.30'],ISO/TC 34/SC 9,9599,,[56712],"['en','fr']",9,

40377,IS,Cor,ISO 6579:2002/Cor 1:2004,Microbiology of food and animal feeding stuffs — Horizontal method for the detection of Salmonella spp. — Technical Corrigendum 1,Microbiologie des aliments — Méthode horizontale pour la recherche des Salmonella spp. — Rectificatif technique 1,2004-03-24,4,['07.100.30'],ISO/TC 34/SC 9,9599,,[56712],['en'],1,

4812,IS,,ISO 658:1980,Oilseeds — Determination of impurities content,Graines oléagineuses — Détermination de la teneur en impuretés,1980-02-01,1,['67.200.20'],ISO/TC 34/SC 2,9599,,[4813],"['en','fr']",4,

4813,IS,,ISO 658:1988,Oilseeds — Determination of impurities content,Graines oléagineuses — Détermination de la teneur en impuretés,1988-06-09,2,['67.200.20'],ISO/TC 34/SC 2,9599,[4812],"[35181,23298]","['en','fr']",4,"<p>The method consists in separating of the impurities, by sieving and sorting, into three categories as follows: -fines, -non-oleaginous impurities, - oleaginous impurities, followed by determing of the mass of total impurities or, on request, of the mass of each category of impurity.</p>"

12986,IS,,ISO 6580:1981,General purpose industrial fans — Circular flanges — Dimensions,Ventilateurs courants industriels — Brides circulaires — Dimensions,1981-09-01,1,['23.120'],ISO/TC 117,9599,,[41116],"['en','fr']",2,<p>Specifies the dimensions of circular flanges for industrial fans. It does not apply to heavy duty types with greater flange thickness. It adopts the R 20 Series as per ISO 497.</p>

41116,IS,,ISO 6580:2005,General-purpose industrial fans — Circular flanges — Dimensions,Ventilateurs courants industriels — Brides circulaires — Dimensions,2005-02-09,2,['23.120'],ISO/TC 117,9599,[12986],[52816],"['en','fr']",4,<p>ISO 6580:2005 specifies the dimensions of circular flanges for general-purpose industrial fans</p>

12987,IS,,ISO 6581:1980,Anodizing of aluminium and its alloys — Determination of the fastness to ultra-violet light of coloured anodic oxide coatings,Anodisation de l'aluminium et de ses alliages — Détermination de la solidité à la lumière ultraviolette des couches anodiques colorées,1980-11-01,1,['25.220.20'],ISO/TC 79/SC 2,9599,,[51492],"['en','fr']",2,"<p>The test represents very severe exposure to ultra-violet light and provides therefore a very rapid determination of light-fastness. Care must be taken in comparing the results of this test with the results of exposure to sunlight. The surface temperature generated by the light source can reach up to 90 °C, and this light source is not, t