Withdrawn and superseded ISO standards — page 149 of 246

13184,IS,,ISO 6727:1981,"Road vehicles — Motorcycles — Symbols for controls, indicators and telltales","Véhicules routiers — Motocycles — Symboles pour les commandes, indicateurs et témoins",1981-03-01,1,"['43.140','01.080.20']",ISO/TC 22,9599,,"[41874,29715]","['en','fr']",3,"<p>Specifies the symbols, i. e. conventional signs, used to identify certain controls, indicators and tell-tales on a motorcycle and to facilitate their usage. Indicates the colours of possible optical tell-tales which warn the driver of the operation or malfunctioning of the devices and equipment connected to the corresponding controls.</p>"

41874,IS,,ISO 6727:2012,"Road vehicles — Motorcycles — Symbols for controls, indicators and tell-tales","Véhicules routiers — Motocycles — Symboles pour les commandes, les indicateurs et les témoins",2012-09-11,2,"['43.140','01.080.20']",ISO/TC 22/SC 38,9599,[13184],[71554],['en'],12,"<p>ISO 6727:2012 specifies the symbols, i.e. conventional signs, used to identify certain controls, indicators and tell-tales on a motorcycle and to facilitate their usage.</p><p>ISO 6727:2012 also indicates the colours of possible optical tell-tales which warn the driver of the operation or malfunctioning of the related devices and equipment.</p><p>ISO 6727:2012 is applicable to those controls, indicators and

13186,IS,,ISO 6730:1992,"Milk — Enumeration of colony-forming units of psychrotrophic micro-organisms — Colony-count technique at 6,5 degrees C","Lait — Dénombrement des unités formant colonie de micro-organismes psychrotrophes — Technique par comptage des colonies à 6,5 degrés C",1992-01-30,1,['07.100.30'],ISO/TC 34/SC 5,9599,,[42068],"['en','fr']",6,"<p>Specifies the principle, the diluents and culture medium, the apparatus and glassware, the sampling and procedure, the expression of results, the repeatability and the test report.</p>"

42068,IS,,ISO 6730:2005,"Milk — Enumeration of colony-forming units of psychrotrophic microorganisms — Colony-count technique at 6,5 degrees C","Lait — Dénombrement des unités formant colonie de micro-organismes psychrotrophes — Technique par comptage des colonies à 6,5 degrés C",2005-09-21,2,['07.100.30'],ISO/TC 34/SC 5,9599,[13186],[67437],"['en','fr']",8,"<p>ISO 6730|IDF 101:2005 specifies a method for the enumeration of colony-forming units of psychrotrophic microorganisms in raw and heat-treated milk by means of the colony-count technique at 6,5 degrees Celsius.</p>"

13187,IS,,ISO 6731:1989,"Milk, cream and evaporated milk — Determination of total solids content (Reference method)","Lait, crème et lait concentré non sucré — Détermination de la matière sèche (Méthode de référence)",1989-05-18,1,"['67.100.10','67.100.99']",ISO/TC 34/SC 5,9599,,[56815],"['en','fr']",3,<p>The method consists in pre-drying of a test portion on a boiling water-bath and subsequent evaporation of the remaining water in a drying oven at a temperature of 102+2 °C.</p>

13188,IS,,ISO 6732:1985,Milk and milk products — Determination of iron content — Spectrometric method (Reference method),Lait et produits laitiers — Détermination de la teneur en fer — Méthode spectrométrique (Méthode de référence),1985-07-04,1,['67.100.01'],ISO/TC 34/SC 5,9599,,[55778],"['en','fr']",6,"<p>Is applicable to milk, skimmed milk, whey, buttermilk, plain and skimmed yogurt, evaporated milk, sweetened condensed milk, dried whole and skimmed milk, dried whey and dried buttermilk, cream and butter, butterfat, ice-cream, cheese of various ages and processed cheese, caseins, caseinates and coprecipitates. The principle of determination consists in digesting the organic material with a

13190,IS,,ISO 6734:1989,Sweetened condensed milk — Determination of total solids content (Reference method),Lait concentré sucré — Détermination de la matière sèche (Méthode de référence),1989-06-08,1,['67.100.10'],ISO/TC 34/SC 5,9599,,[56816],"['en','fr']",3,<p>The method consists in pre-drying of a test portion on a boiling water-bath and subsequent evaporation of the remaining water in the presence of sand at a temperature of 102+2 °C in a drying oven.</p>

13192,IS,,ISO 6736:1982,Dried milk — Determination of nitrate and nitrite contents — Method by cadmium reduction and photometry,Lait sec — Détermination des teneurs en nitrates et en nitrites — Méthode par réduction au cadmium et photométrie,1982-12-01,1,['67.100.10'],ISO/TC 34/SC 5,9599,,"[31423,31421,31422]","['en','fr']",6,"<p>Describes a method suitable for whole, partly skimmed and skimmed milk powder. The principle of determination consists in dissolving the dried milk in water, precipitating the fat and proteins, filtering and reducing the nitrate to nitrite in a portion of the filtrate by means of copperized cadmium. The sampling shall be made as specified in ISO 707. The apparatus f

13195,IS,,ISO 6739:1982,Whey cheese — Determination of nitrate and nitrite contents — Method by cadmium reduction and photometry,Fromage de sérum — Détermination des teneurs en nitrates et en nitrites — Méthode par réduction au cadmium et photométrie,1982-12-01,1,['67.100.30'],ISO/TC 34/SC 5,9599,,[13196],"['en','fr']",6,

13196,IS,,ISO 6739:1988,Whey cheese — Determination of nitrate and nitrite contents — Method by cadmium reduction and spectrometry,Fromage de sérum — Détermination des teneurs en nitrates et en nitrites — Méthode par réduction au cadmium et spectrométrie,1988-08-25,2,['67.100.30'],ISO/TC 34/SC 5,9599,[13195],"[31423,31421,31422]","['en','fr']",6,"<p>Is suitable for all kinds of whey cheese. The principle of determination consists in extracting the whey cheese with warm water, precipitating the fat and proteins, filtering and reducing the nitrate in a portion of the filtrate to nitrite by means of copperized cadmium. The apparatus for nitrate reduction is shown in a figure.</p>"

4840,IS,,ISO 674:1988,Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K),Matériaux métalliques — Essai de dureté — Étalonnage des blocs de référence à utiliser pour les machines d'essai de dureté Rockwell (échelles A - B - C - D - E - F - G - H - K),1988-12-01,1,['77.040.10'],ISO/TC 164/SC 3,9599,,[26049],"['en','fr']",3,

13197,IS,,ISO 6740:1985,Dried whey — Determination of nitrate and nitrite contents — Method by cadmium reduction and spectrometry,Lactosérum en poudre — Détermination des teneurs en nitrates et en nitrites — Méthode par réduction au cadmium et spectrométrie,1985-09-12,1,['67.100.99'],ISO/TC 34/SC 5,9599,,"[31423,31421,31422]","['en','fr']",6,"<p>The principle of determination consists in dissolving the dried whey in warm water, precipitating the fat and proteins, filtering and reducing the nitrate in a portion of the filtrate to nitrite by means of copperized cadmium. The sampling shall be made as specified in ISO 707. A figure shows the apparatus for nitrate reduction.</p>"

13198,IS,,ISO 6741-1:1987,Textiles — Fibres and yarns — Determination of commercial mass of consignments — Part 1: Mass determination and calculations,Textiles — Fibres et fils — Détermination de la masse commerciale d'un lot — Partie 1: Détermination de la masse et modes de calcul,1987-03-12,1,['59.060.01'],ISO/TC 38,9599,,[13199],,,

13203,IS,,ISO 6742-1:1985,Cycles — Lighting and reflective devices — Photometric and physical requirements — Part 1: Lighting equipment,Cycles — Éclairage et dispositifs rétroréfléchissants — Exigences photométriques et physiques — Partie 1: Dispositifs d'éclairage,1985-02-28,1,['43.150'],ISO/TC 149/SC 1,9599,,[13204],"['en','fr']",,

13204,IS,,ISO 6742-1:1987,Cycles — Lighting and retro-reflective devices — Photometric and physical requirements — Part 1: Lighting equipment,Cycles — Éclairage et dispositifs rétroréfléchissants — Exigences photométriques et physiques — Partie 1: Dispositifs d'éclairage,1987-09-17,2,['43.150'],ISO/TC 149/SC 1,9599,[13203],"[55231,13205]","['en','fr']",15,"<p>This second edition cancels and replaces the first edition (ISO 6742-1 : 1985), incorporating draft Amendment ISO 6742-1/DAM 1 : 1985. Constitutes a revision of some clauses. Includes a new definition 4.12 and some new methodes, and marking requirements. Applies to lighting equipment for use on cycles intended to be used on public roads

55231,IS,,ISO 6742-1:2015,Cycles — Lighting and retro-reflective devices — Part 1: Lighting and light signalling devices,Cycles — Éclairage et dispositifs rétro-réfléchissants — Partie 1: Équipements de signalisation et d'éclairage,2015-05-27,3,['43.150'],ISO/TC 149/SC 1,9599,[13204],[82576],['en'],18,"<p>ISO 6742-1:2015 is applicable to lighting devices used on cycles intended to be used on public roads and, especially, bicycles complying with ISO 4210 and ISO 8098.</p><p>ISO 6742-1:2015 specifies the functions, safety requirements, photometric performance and test methods of lighting and signalling devices that can be used on cycles.</p>"

13206,IS,,ISO 6742-2:1984,Cycles — Lighting and retro-reflective devices — Photometric and physical requirements — Part 2: Retro-reflective devices,Cycles — Éclairage et dispositifs rétroréfléchissants — Caractéristiques photométriques et physiques — Partie 2: Dispositifs rétroréfléchissants,1984-11-01,1,['43.150'],ISO/TC 149/SC 1,9599,,[13207],"['en','fr']",8,

13207,IS,,ISO 6742-2:1985,Cycles — Lighting and retro-reflective devices — Photometric and physical requirements — Part 2: Retro-reflective devices,Cycles — Éclairage et dispositifs rétroréfléchissants — Caractéristiques photométriques et physiques — Partie 2: Dispositifs rétroréfléchissants,1985-07-18,2,['43.150'],ISO/TC 149/SC 1,9599,[13206],"[13208,55232]","['en','fr']",8,<p>This part of ISO 6742 specifies general requirements for retro-reflective devices for fitting to cycles intended to be used on public roads. Such retro-reflective devices are effective in conditions of poor visibility and at night in helping to make all road users aware of the presence of a cyclist.</p>

55232,IS,,ISO 6742-2:2015,Cycles — Lighting and retro-reflective devices — Part 2: Retro-reflective devices,Cycles — Dispositifs d'éclairage et dispositifs rétroréfléchissants — Partie 2: Dispositifs rétroréfléchissants,2015-05-27,3,['43.150'],ISO/TC 149/SC 1,9599,[13207],[82577],['en'],18,"<p>ISO 6742-2:2015 is applicable to retro-reflective devices used on cycles intended to be used on public roads and, especially, bicycles complying with ISO 4210 and ISO 8098.</p><p>ISO 6742-2:2015 specifies photometric and physical requirements of retro-reflective devices.</p>"

74441,IS,Amd,ISO 6742-2:2015/Amd 1:2018,Cycles — Lighting and retro-reflective devices — Part 2: Retro-reflective devices — Amendment 1,Cycles — Dispositifs d'éclairage et dispositifs rétroréfléchissants — Partie 2: Dispositifs rétroréfléchissants — Amendement 1,2018-04-27,3,['43.150'],ISO/TC 149/SC 1,9599,,[82577],['en'],1,

59905,IS,,ISO 6742-3:2015,Cycles — Lighting and retro-reflective devices — Part 3: Installation and use of lighting and retro-reflective devices,Cycles — Éclairages et dispositifs rétroréfléchissant — Partie 3: Installation et usage des éclairages et des dispositifs rétroréfléchissant,2015-05-27,1,['43.150'],ISO/TC 149/SC 1,9599,,[82578],['en'],7,"<p>ISO 6742-3:2015 is applicable to lighting and retro-reflective devices used on cycles intended to be used on public roads and, especially, bicycles complying with ISO 4210 and ISO 8098.</p><p>ISO 6742-3:2015 specifies the safety requirements and test methods of lighting and retro-reflective devices for fastening devices, control, (guidelines for

59906,IS,,ISO 6742-4:2015,Cycles — Lighting and retro-reflective devices — Part 4: Lighting systems powered by the cycle's movement,Cycles — Dispositifs d'éclairage et dispositifs rétroréfléchissants — Partie 4: Systèmes d'éclairage alimentés par dynamo,2015-05-27,1,['43.150'],ISO/TC 149/SC 1,9599,,[82579],['en'],13,"<p>ISO 6742-4:2015 is applicable to lighting systems used on cycles intended to be used on public roads and, especially, bicycles complying with ISO 4210 and ISO 8098.</p><p>ISO 6742-4:2015 specifies requirements and test methods for the performance of lighting systems powered by the cycle's movement. It applies to light devices complying with ISO 6742‑1. Lighting systems includ

59907,IS,,ISO 6742-5:2015,Cycles — Lighting and retro-reflective devices — Part 5: Lighting systems not powered by the cycle's movement,Cycles — Dispositifs d'éclairage et dispositifs rétroréfléchissants — Partie 5: Systèmes d'éclairage non alimentés par dynamo,2015-05-27,1,['43.150'],ISO/TC 149/SC 1,9599,,[82580],['en'],5,"<p>ISO 6742-5:2015 is applicable to lighting systems used on cycles intended to be used on public roads and, especially, bicycles complying with ISO 4210 and ISO 8098.</p><p>ISO 6742-5:2015 specifies requirements and test methods for the performance of lighting systems not powered by the cycle's movement. It applies to light devices complying with ISO 6742‑1. Lighting sys

13210,IS,,ISO 6743-0:1981,"Lubricants, industrial oils and related products (class L) — Classification — Part 0: General","Lubrifiants, huiles industrielles et produits connexes (classe L) — Classification — Partie 0: Généralités",1981-09-01,1,['75.100'],ISO/TC 28/SC 4,9599,,[33047],"['en','fr']",2,"<p>Within this class 18 families of products are defined according to application in order to cover, as far as possible, all the applications for which these products are used. The detailed classification of each family will be given in subsequent parts of ISO 6743 as the need arises. The classification concerns only new products.</p>"

13211,IS,,ISO 6743-1:1981,"Lubricants, industrial oils and related products (class L) — Classification — Part 1: Family A (Total loss systems)","Lubrifiants, huiles industrielles et produits connexes (classe L) — Classification — Partie 1: Famille A (Graissage perdu)",1981-09-01,1,['75.100'],ISO/TC 28/SC 4,9599,,[33046],"['en','fr']",1,<p>Establishes the detailed classification. Should be read in conjunction with ISO 6743-0. Each category is designated by a code. The designation can be supplemented by the addition of viscosity grades. Products are designated in a uniform manner for example in complete or in an abbreviated form.</p>

13222,IS,,ISO 6743-13:1989,"Lubricants, industrial oils and related products (class L) — Classification — Part 13: Family G (Slideways)","Lubrifiants, huiles industrielles et produits connexes (Classe L) — Classification — Partie 13: Famille G (Glissières)",1989-09-28,1,['75.100'],ISO/TC 28/SC 4,9599,,[25001],"['en','fr']",1,<p>Specifies the detailed classification which is designated by a code. The designation can be supplemented by a number denoting the viscosity grade. Products are designated in a uniform manner either is complete or in an abbreviated form. Should be read in conjunction with ISO 6743-0.</p>

25883,IS,,ISO 6743-15:2000,"Lubricants, industrial oils and related products (class L) — Classification — Part 15: Family E (Internal combustion engine oils)","Lubrifiants, huiles industrielles et produits connexes (classe L) — Classification — Partie 15: Famille E (Huiles pour moteurs à combustion interne)",2000-03-23,1,['75.100'],ISO/TC 28/SC 4,9599,,[40036],"['en','fr']",4,

13224,IS,,ISO 6743-3A:1987,"Lubricants, industrial oils and related products (class L) — Classification — Part 3A: Family D (Compressors)","Lubrifiants, huiles industrielles et produits connexes (classe L) — Classification — Partie 3A: Famille D (Compresseurs)",1987-04-09,1,['75.100'],ISO/TC 28/SC 4,9599,,[26482],"['en','fr']",4,"<p>Establishes the detailed classification of lubricants in use for air compressors. Forms the preliminary part, including gas compressors and refrigeration compressors. The intention is to provide a rationalized range of the most commonly used, internationally available lubricants for air compressors, without resorting to unnecessary restriction by specifications o

13225,IS,,ISO 6743-3B:1988,"Lubricants, industrial oils and related products (class L) — Classification — Part 3B: Family D (Gas and refrigeration compressors)","Lubrifiants, huiles industrielles et produits connexes (classe L) — Classification — Partie 3B: Famille D (Compresseurs de gaz et frigorifiques)",1988-02-11,1,['75.100'],ISO/TC 28/SC 4,9599,,[26482],"['en','fr']",3,"<p>Constitutes the second element for all types of compressors, which includes air compressors and vacuum pumps, in addition to the others. The intent is to describe lubricants in common use for gas compressors (table 1) and refrigeration compressors (table 2). This document should be read in conjunction with ISO 6743-0.

13213,IS,,ISO 6743-4:1982,"Lubricants, industrial oils and related products (class L) — Classification — Part 4: Family H (Hydraulic systems)","Lubrifiants, huiles industrielles et produits connexes — Classe L — Classification — Partie 4: Famille H (Systèmes hydrauliques)",1982-11-01,1,['75.120'],ISO/TC 28/SC 4,9599,,[23700],"['en','fr']",2,

23700,IS,,ISO 6743-4:1999,"Lubricants, industrial oils and related products (class L) — Classification — Part 4: Family H (Hydraulic systems)","Lubrifiants, huiles industrielles et produits connexes (classe L) — Classification — Partie 4: Famille H (Systèmes hydrauliques)",1999-10-14,2,['75.120'],ISO/TC 28/SC 4,9599,[13213],[60483],"['en','fr']",4,

13214,IS,,ISO 6743-5:1988,"Lubricants, industrial oils and related products (class L) — Classification — Part 5: Family T (Turbines)","Lubrifiants, huiles industrielles et produits connexes (classe L) — Classification — Partie 5: Famille T (Turbines)",1988-02-04,1,['75.100'],ISO/TC 28/SC 4,9599,,[36444],"['en','fr']",3,"<p>Establishes the detailed classification. Should be read in conjunction with part 0. This classification excludes, for the time being, more specific applications for aircraft and hydraulic turbines. Standards containing specifications defining the categories of products available on the market are being prepared. Provision has been made for certain applications including so

13215,IS,,ISO 6743-6:1990,"Lubricants, industrial oils and related products (class L) — Classification — Part 6: Family C (Gears)","Lubrifiants, huiles industrielles et produits connexes (classe L) — Classification — Partie 6: Famille C (Engrenages)",1990-11-15,1,['75.100'],ISO/TC 28/SC 4,9599,,[70818],"['en','fr']",4,<p>Establishes the detailed classification of family C which belongs to class L. Should be read in conjunction with ISO 6743-0. Applies only to lubricants for industrial gears.</p>

13218,IS,,ISO 6743-9:1987,"Lubricants, industrial oils and related products (class L) — Classification — Part 9: Family X (Greases)","Lubrifiants, huiles industrielles et produits connexes (classe L) — Classification — Partie 9: Famille X (Graisses)",1987-11-05,1,['75.100'],ISO/TC 28/SC 4,9599,,[23698],"['en','fr']",4,"<p>Establishes the detailed classification. Should be read in conjunction with ISO 6743-0. It applies to categories used for lubrication of equipment, components of machines, vehicles etc. The classification has been made according to the operating conditions under which they are used because the versatile nature of greases makes it impracticable to classify them according to

13226,IS,,ISO 6744:1984,Binders for paints and varnishes — Alkyd resins — General methods of test,Liants pour peintures et vernis — Résines alkydes — Méthodes générales d'essai,1984-11-01,1,['87.060.20'],ISO/TC 35,9599,,"[30073,30074,30075,2084]","['en','fr']",7,

13228,IS,,ISO 6746-1:1982,Earth-moving machinery — Definitions of dimensions and symbols — Part 1: Base machine,Engins de terrassement — Définitions des dimensions et des symboles — Partie 1: Engins de base,1982-02-01,1,['53.100'],ISO/TC 127/SC 4,9599,,[13229],"['en','fr']",9,

13229,IS,,ISO 6746-1:1987,Earth-moving machinery — Definitions of dimensions and symbols — Part 1: Base machine,Engins de terrassement — Définitions des dimensions et des symboles — Partie 1: Engin de base,1987-10-29,2,['53.100'],ISO/TC 127/SC 4,9599,[13228],[23688],"['en','fr']",9,"<p>Applies to the basic types of earth-moving machines as defined in ISO 6165. Contains six annexes dealing with different dimensions. Cancels and replaces the first edition (ISO 6746-1 : 1982), of which it constitutes a technical revision.</p>"

13230,IS,,ISO 6746-2:1982,Earth-moving machinery — Definitions of dimensions and symbols — Part 2: Equipment,Engins de terrassement — Définitions des dimensions et des symboles — Partie 2: Équipement,1982-06-01,1,['53.100'],ISO/TC 127/SC 4,9599,,[13231],"['en','fr']",10,

13231,IS,,ISO 6746-2:1987,Earth-moving machinery — Definitions of dimensions and symbols — Part 2: Equipment,Engins de terrassement — Définitions des dimensions et des symboles — Partie 2: Équipements,1987-11-05,2,['53.100'],ISO/TC 127/SC 4,9599,[13230],[23689],"['en','fr']",10,"<p>Applies to the equipment of basic types of earth-moving machines as defined in ISO 6165. Contains also five annexes dealing with different dimensions (height, width, length etc.). Cancels and replaces the first edition (ISO 6746-2 : 1982), of which it constitutes a technical revision.</p>"

13232,IS,,ISO 6747:1982,Earth-moving machinery — Tractors — Terminology,Engins de terrassement — Tracteurs — Terminologie,1982-02-01,1,"['53.100','01.040.53']",ISO/TC 127/SC 4,9599,,[13233],"['en','fr']",17,

13233,IS,,ISO 6747:1988,Earth-moving machinery — Tractors — Terminology and commercial specifications,Engins de terrassement — Tracteurs — Terminologie et spécifications commerciales,1988-07-07,2,"['01.040.53','53.100']",ISO/TC 127/SC 4,9599,[13232],[23690],"['en','fr']",18,

13234,IS,Amd,ISO 6747:1988/Amd 1:1989,Earth-moving machinery — Tractors — Terminology and commercial specifications — Amendment 1,Engins de terrassement — Tracteurs — Terminologie et spécifications commerciales — Amendement 1,1989-06-15,2,"['01.040.53','53.100']",ISO/TC 127/SC 4,9599,,[23690],"['en','fr']",1,

23690,IS,,ISO 6747:1998,Earth-moving machinery — Tractor-dozers — Terminology and commercial specifications,Engins de terrassement — Bouteurs — Terminologie et spécifications commerciales,1998-09-24,3,"['53.100','01.040.53']",ISO/TC 127/SC 4,9599,"[13234,13233]",[51830],"['en','fr']",29,

33373,IS,Amd,ISO 6747:1998/Amd 1:2003,Earth-moving machinery — Tractor-dozers — Terminology and commercial specifications — Amendment 1,Engins de terrassement — Bouteurs — Terminologie et spécifications commerciales — Amendement 1,2003-05-08,3,"['01.040.53','53.100']",ISO/TC 127/SC 4,9599,,[51830],"['en','fr']",2,

13236,IS,,ISO 6749:1981,Earth-moving machinery — Preservation and storage,Engins de terrassement — Conservation et stockage,1981-06-01,1,['53.100'],ISO/TC 127,9599,,[13237],"['en','fr']",5,

4841,IS,,ISO 675:1979,Textiles — Woven fabrics — Determination of dimensional change on commercial laundering near the boiling point,Textiles — Tissus — Détermination de la variation des dimensions au lavage industriel au voisinage de l'ébullition,1979-09-01,1,['59.080.30'],ISO/TC 38/SC 2,9599,,[65157],"['en','fr']",4,"<p>The method is only intended for the assessment of dimensional changes undergone by a woven fabric subjected to a single laundering. Washing of a specimen in a cylindrical reversing laundry machine under specified conditions. Extraction of excess water and pressing without preliminary drying. Measurement, before and after laundering, of distances marked on the specimen in th

4842,IS,Cor,ISO 675:1979/Cor 1:1990,Textiles — Woven fabrics — Determination of dimensional change on commercial laundering near the boiling point — Technical Corrigendum 1,Textiles — Tissus — Détermination de la variation des dimensions au lavage industriel au voisinage de l'ébullition — Rectificatif technique 1,1990-11-22,1,['59.080.30'],ISO/TC 38/SC 2,9599,,[65157],"['en','fr']",1,<p>Complements clause 6 by a note concerning the prevention of entanglement due to excessive ravelling.</p>

13238,IS,,ISO 6750:1981,Earth-moving machinery — Operation and maintenance — Guide to the format and content of manuals,Engins de terrassement — Emploi et entretien — Guide pour la présentation et le contenu des manuels techniques,1981-08-01,1,['53.100'],ISO/TC 127,9599,,[13239],"['en','fr']",15,

13239,IS,,ISO 6750:1984,Earth-moving machinery — Operation and maintenance — Format and content of manuals,Engins de terrassement — Emploi et entretien — Présentation et contenu des manuels techniques,1984-02-01,2,['53.100'],ISO/TC 127/SC 3,9599,"[8933,13238]",[29209],"['en','fr']",16,"<p>Establishes guidelines on the general rules necessary for the preparation and preservation of manuals for earth-moving machinery. A manual shall be simple to understand and have adequate explanatory notes, incorporate the use of internationally recognized symbols, and be easy to use and compact.</p>"

29209,IS,,ISO 6750:2005,Earth-moving machinery — Operator's manual — Content and format,Engins de terrassement — Manuel de l'opérateur — Présentation et contenu,2005-08-18,3,['53.100'],ISO/TC 127/SC 3,9599,[13239],"[68900,75438]","['en','fr']",13,<p>ISO 6750:2005 specifies the content and gives guidance on the format of operator's manuals for earthmoving machinery as defined in ISO 6165. It is intended to assist manufacturers of the machinery in the drafting and presentation of these manuals.</p>

13240,IS,,ISO 6751:1982,Ejector pins with cylindrical head — Basic dimensions,Éjecteurs à tête cylindrique — Dimensions de base,1982-11-01,1,['25.120.30'],ISO/TC 29,9599,,[13241],"['en','fr']",1,

13241,IS,,ISO 6751:1986,Ejector pins with cylindrical head — Dimensions,Éjecteurs à tête cylindrique — Dimensions,1986-11-20,2,['25.120.30'],ISO/TC 29/SC 8,9599,[13240],[24799],"['en','fr']",2,

24799,IS,,ISO 6751:1998,Tools for moulding — Ejector pins with cylindrical head,Outillage de moulage — Éjecteurs à tête cylindrique,1998-04-23,3,['25.120.30'],ISO/TC 29/SC 8,9599,[13241],[57874],"['en','fr']",5,

13242,IS,,ISO 6752:1984,Round punches with 60 degrees conical head and straight shank,Poinçons à tête conique à 60 degrés et corps cylindrique,1984-07-01,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[44267],"['en','fr']",3,"<p>Lays down the basic dimensions of these punches in the diameter range of 0,5 to 15 mm. It gives as examples materials and hardness, and specified designation of punches. The main use of punches as defines in ISO 6752 is for punching holes in steel steet. They may also be used when punching holes in other materials.</p>"

20379,IS,,ISO 6753-1:1994,"Tools for pressing and moulding — Machined plates — Part 1: Machined plates for press tools, jigs and fixtures","Outillage de presse et de moulage — Plaques usinées — Partie 1: Plaques usinées pour outillage de presse, gabarits et montages",1994-08-18,1,['25.120.10'],ISO/TC 29/SC 8,9599,,[34426],"['en','fr']",3,"<p>Gives dimensions and tolerances of machined plates for press tools, jigs and fixtures. Gives guidance relative to materials and hardness and specifies the designation.</p>"

13243,IS,,ISO 6753:1982,"Machined plates for press tools, moulds, jigs and fixtures — Nominal dimensions","Plaques usinées pour outils de presses, moules, montages et fixations — Dimensions nominales",1982-11-01,1,"['25.120.10','25.120.30']",ISO/TC 29/SC 8,9599,,[20382],"['en','fr']",1,

13244,IS,,ISO 6754:1985,Whole thyme (Thymus vulgaris Linnaeus) — Specification,Thym entier (Thymus vulgaris Linnaeus) — Spécifications,1985-10-24,1,['67.220.10'],ISO/TC 34/SC 7,9599,,[13245],"['en','fr']",4,

13245,IS,,ISO 6754:1996,Dried thyme (Thymus vulgaris L.) — Specification,Thym séché (Thymus vulgaris L.) — Spécifications,1996-04-18,2,['67.220.10'],ISO/TC 34/SC 7,9599,[13244],[90581],"['en','fr']",4,<p>Specifies the requirements for dried thyme (Thymus vulgaris L.) leaves in the rubbed form. Recommendations relating to storage and transport conditions are given in annex A.</p>

13246,IS,,ISO 6755:1984,Dried sour cherries — Specification,Griottes déshydratées — Spécifications,1984-05-01,1,['67.080.10'],ISO/TC 34,9599,,"[13247,34981]","['en','fr']",4,"<p>Definitions of relevant terms. Then requirements for grades, odour, taste, freedom from moulds, insects etc.,extraneous matter, damaged friuts, moisture content; further descsription of sampling, of methods of test (see annexes A and B), of packing and marking.</p>"

13248,IS,,ISO 6756:1984,Decorticated stone pine nuts — Specification,Pignons décortiqués — Spécifications,1984-05-01,1,['67.080.10'],ISO/TC 34/SC 3,9599,,[13249],"['en','fr']",5,"<p>Specifies requirements for nuts from Pinus pinea Linnaeus, for human consumption. It does not apply to roasted or processed nuts. It defines relevant terms, shows special requirements, such as odour, taste, freedom from moulds, insects, etc., extraneous matter, moisture constent, further it describes sampling, methods of test, packing and marking. An annex A provides the determination of damaged kernels etc. An annex B describes the determination of moisture content by the entrainment.</p>"

13250,IS,,ISO 6757:1984,Decorticated kernels of mahaleb cherries — Specification,Noyaux décortiqués de cerises mahaleb — Spécifications,1984-05-01,1,['67.080.10'],ISO/TC 34/SC 3,9599,,[13251],"['en','fr']",4,"<p>Specifies requirements for kernels from Prunus mahaleb Linnaeus, for human consumption. It defines relevant terms, shows special requirements, such as odour, taste, freedom from moulds, insects etc., extraneous matter, moisture content, further it descibes sampling, methods of test, packing and marking. an annex A provides the determination of damaged kernels etc. An annex B describes the determination of moistrure content.</p>"

4843,IS,,ISO 676:1982,Spices and condiments — Nomenclature — First list,Épices — Nomenclature — Première liste,1982-12-01,1,"['67.220.10','01.040.67']",ISO/TC 34/SC 7,9599,,[4844],"['en','fr','ru']",15,

82366,IS,,ISO 6760-1:2024,Optics and photonics — Test method for temperature coefficient of refractive index of optical glasses — Part 1: Minimum deviation method,Optique et photonique — Méthode d'essai pour déterminer le coefficient de température de l'indice de réfraction des verres optiques — Partie 1: Méthode de la déviation minimale,2024-05-06,1,['37.020'],ISO/TC 172/SC 3,9599,,[90228],['en'],22,"<p class='MsoBodyText'><span lang='EN-GB'>This document specifies the measurement method used for calculating the temperature coefficient of the refractive index by measuring the refractive index, which changes with the temperature of the optical glass using the minimum deviation method.</span>

13256,IS,,ISO 6762:1982,Tyre valves — ISO core chamber No. 2,Valves pour pneumatiques — Logement du mécanisme ISO no 2,1982-12-01,2,['83.160.01'],ISO/TC 31/SC 9,9599,,[34212],"['en','fr']",3,"<p>Specifies the interchangeability dimensions of an bore, and applies principally to core chambers of valves used on tyres for agricultural machines, earth-moving machines and civil aircraft. A figure shows the details. This second edition cancels and replaces the first edition (1981).</p>"

13261,IS,,ISO 6768:1985,Ambient air — Determination of the mass concentration of nitrogen dioxide — Modified Griess-Saltzman method,Air ambiant — Détermination de la concentration en masse du dioxyde d'azote — Méthode de Griess-Saltzman modifiée,1985-06-20,1,['13.040.20'],ISO/TC 146/SC 3,9599,,[13262],"['en','fr']",12,

13265,IS,,ISO 6771:1981,Aerospace construction — Fluid systems and components — Pressure and temperature classifications,Constructions aérospatiales — Systèmes hydrauliques et leurs composants — Classification des températures et pressions,1981-07-01,1,['49.080'],ISO/TC 20/SC 10,9599,,[13266],"['en','fr']",1,

13266,IS,,ISO 6771:1987,Aerospace — Fluid systems and components — Pressure and temperature classifications,Aéronautique et espace — Systèmes de fluides et éléments constitutifs — Classification des températures et pressions,1987-09-03,2,['49.080'],ISO/TC 20/SC 10,9599,[13265],"[43220,36800]","['en','fr']",1,<p>Establishes the temperature types and pressure classes that are commonly used. System operating temperature ranges shall be classified as given in table 1. Nominal pressures shall be classified as given in table 2. The operating pressures listed are selected from ISO 2944 as far as practical.</p>

13267,IS,,ISO 6772:1981,"Aerospace fluid systems — Impulse testing of hydraulic hose, tubing and fittings assemblies","Systèmes hydrauliques pour constructions aérospatiales — Essai sous pression de choc des assemblages de tuyaux flexibles, tubes et raccords",1981-12-01,1,['49.080'],ISO/TC 20/SC 10,9599,,[13268],"['en','fr']",3,

13268,IS,,ISO 6772:1988,"Aerospace — Fluid systems — Impulse testing of hydraulic hose, tubing and fitting assemblies","Aéronautique et espace — Systèmes de fluides — Essai d'impulsion des tuyauteries flexibles, tubes et raccords",1988-10-13,2,"['83.140.40','49.080']",ISO/TC 20/SC 10,9599,[13267],"[54516,40002]","['en','fr']",3,"<p>Specifies the requirements and the procedures. Requirements may apply, when appropriate, to components used in other areospace fluid systems. Against the first edition some technical details are revised. Includes the requirements for shape of impulse trace, rate of pressure rise, preparation of specimens, test fluid, principle of test, test method and intended use

13269,IS,,ISO 6773:1982,Aerospace fluid systems — Thermal shock testing of piping and fittings,Constructions aérospatiales — Systèmes hydrauliques — Essai de choc thermique des tuyauteries et raccords,1982-03-01,1,['49.080'],ISO/TC 20/SC 10,9599,,[13270],"['en','fr']",2,

13275,IS,,ISO 6779:1981,Acceptance conditions for broaching machines of vertical internal type — Testing of accuracy,Conditions de réception des machines verticales à brocher les intérieurs — Contrôle de la précision,1981-09-01,1,['25.080.30'],ISO/TC 39/SC 2,9599,,"[71543,73816]","['en','fr']",7,"<p>Specifies both preliminary levelling and geometrical tests for these general purpose and normal accuracy broaching machines, and gives the corresponding permissible deviations which apply. Gives also the terminology used for the main elements of the machine (in English, French and Russian as well as the equivalent terms in German). It deals only with the verification of accuracy of the machine. I

73816,IS,,ISO 6779:2019,Test conditions for vertical internal type broaching machines — Testing of accuracy,Conditions de réception des machines verticales à brocher les intérieurs — Contrôle de l'exactitude,2019-05-23,2,['25.080.30'],ISO/TC 39/SC 2,9599,[13275],"[83156,84373]","['en','fr']",20,"<p>This document specifies, with reference to ISO 230‑1, the geometric tests on vertical internal type broaching machines with vertical Z-axis providing the main cutting motion.</p><p>It also specifies the applicable tolerances corresponding to the tests mentioned above for normal-accuracy vertical internal type broaching machines.</p><p>This document explains concepts or configurations and common fe

13276,IS,,ISO 6780:1988,General-purpose flat pallets for through transit of goods — Principal dimensions and tolerances,Palettes d'usage général pour le transport de marchandises — Dimensions principales et tolérances,1988-12-29,1,['55.180.20'],ISO/TC 51,9599,,[30524],"['en','fr']",7,"<p>Specifies overall dimensions for single-deck and double-deck non-reversible pallets for through transit of goods, and dimensions related to their handling by pallet trucks, fork lift trucks and other appropriate handling equipment.</p>"

22114,IS,Amd,ISO 6780:1988/Amd 1:1994,General-purpose flat pallets for through transit of goods — Principal dimensions and tolerances — Amendment 1,Palettes d'usage général pour le transport de marchandises — Dimensions principales et tolérances — Amendement 1,1994-06-23,1,['55.180.20'],ISO/TC 51,9599,,[30524],"['en','fr']",1,"<p>Contains amendments to ISO 6780-1988, which specifies overall dimensions for single-deck and double-deck non-reversible pallets for through transit of goods, and dimensions related to their handling by pallet trucks, fork lift trucks and other appropriate handling equipment.</p>"

13277,IS,,ISO 6781:1983,Thermal insulation — Qualitative detection of thermal irregularities in building envelopes — Infrared method,Isolation thermique — Détection qualitiative d'irrégularités thermiques dans des enveloppes de bâtiments — Méthode infrarouge,1983-12-01,1,['91.120.10'],ISO/TC 163/SC 1,9599,,"[61360,61361,58015,61359,79848]","['en','fr']",12,"<p>Specifies a qualitative method, by thermographic examination (infrared method), for detecting thermal irregularities in building envelopes. The method is used to identify wide variations in the thermal properties, including air tightness, of the components constituting the external envelopes of buildings. Does not apply to the determin

13278,IS,,ISO 6782:1982,Aggregates for concrete — Determination of bulk density,Granulats pour béton — Détermination de la masse volumique en vrac,1982-07-01,1,['91.100.30'],ISO/TC 71/SC 1,9599,,"[67541,67542,67543,74153]","['en','fr']",2,"<p>Specifies a method for the determination of the bulk density of dry or moist aggregates (normal or lightweight) for concrete in either loose or compacted condition. Describes apparatus, sampling, determination of uncompacted and compacted bulk density, expression of results, and test report.</p>"

13279,IS,,ISO 6783:1982,Coarse aggregates for concrete — Determination of particle density and water absorption — Hydrostatic balance method,Gros granulats pour béton — Détermination de la masse volumique réelle et de l'absorption d'eau — Méthode de la balance hydrostatique,1982-06-01,1,['91.100.30'],ISO/TC 71/SC 1,9599,,"[67541,67542,67543,74153]","['en','fr']",2,"<p>Specifies a method for the determination of the particle density and water absorption of coarse aggregates, having a nominal size greater than 4 mm, for concrete. Covers definitions, apparatus and materials, sampling, procedure, expression of results, and test report.</p>"

13280,IS,,ISO 6784:1982,Concrete — Determination of static modulus of elasticity in compression,Béton — Détermination du module d'élasticité statique en compression,1982-07-01,1,['91.100.30'],ISO/TC 71,9599,,[51829],"['en','fr']",3,"<p>Specifies a method for the determination of the static modulus of elasticity in compression of hardened concrete, on test specimens which may be cast or taken from a structure. Covers also apparatus, test specimens, preparation of test specimens, determination or compressive strength and static modulus of elasticity, expression of results, and test report.</p>"

13281,IS,,ISO 6785:1985,Milk and milk products — Detection of salmonella,Lait et produits laitiers — Recherche des Salmonella,1985-11-14,1,['07.100.30'],ISO/TC 34/SC 5,9599,,[13282],"['en','fr']",13,

13282,IS,,ISO 6785:2001,Milk and milk products — Detection of Salmonella spp.,Lait et produits laitiers — Recherche de Salmonella spp.,2001-06-07,2,['07.100.30'],ISO/TC 34/SC 5,9599,[13281],[56712],"['en','fr']",23,<p>ISO 6785|IDF 93:2001 specifies a method for the detection of <i>Salmonella</i> spp. in milk and milk products.</p>

13284,IS,,ISO 6787:1982,Assembly tools for screws and nuts — Adjustable wrenches — Width across flats up to 50 mm,Outils de manoeuvre pour vis et écrous — Clés à molette — Ouverture jusqu'à 50 mm,1982-12-01,1,['25.140.30'],ISO/TC 29/SC 10,9599,,[26668],"['en','fr']",2,

26668,IS,,ISO 6787:2001,Assembly tools for screws and nuts — Adjustable wrenches,Outils de manoeuvre pour vis et écrous — Clés à molette,2001-03-29,2,['25.140.30'],ISO/TC 29/SC 10,9599,[13284],[71911],"['en','fr']",5,

13285,IS,,ISO 6788:1982,Assembly tools for screws and nuts — Four-way socket wrenches,Outils de manoeuvre pour vis et écrous — Clés en croix,1982-11-01,1,['25.140.30'],ISO/TC 29/SC 10,9599,,[26669],"['en','fr']",3,

13286,IS,,ISO 6789:1982,Assembly tools for screws and nuts — Hand torque tools — Requirements and test methods,Outils de manoeuvre pour vis et écrous — Outils dynamométriques à commande manuelle — Exigences et méthodes d'essai,1982-12-01,1,['25.140.30'],ISO/TC 29/SC 10,9599,,[13287],"['en','fr']",3,

13287,IS,,ISO 6789:1992,Assembly tools for screws and nuts — Hand torque tools — Requirements and test methods,Outils de manoeuvre pour vis et écrous — Outils dynamométriques à commande manuelle — Exigences et méthodes d'essai,1992-12-03,2,['25.140.30'],ISO/TC 29/SC 10,9599,"[14778,13286]",[29929],"['en','fr']",6,"<p>Applies to indicating and setting torque wrenches according to numbers 258 and 259 of ISO 1703. Requirements and test methods are related to assignment of driving square, measuring range, scales, tolerances, accuracy testing, and marking.</p>"

29929,IS,,ISO 6789:2003,"Assembly tools for screws and nuts — Hand torque tools — Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure","Outils de manoeuvre pour vis et écrous — Outils dynamométriques à commande manuelle — Exigences et méthodes d'essai pour vérifier la conformité de conception, la conformité de qualité et la procédure de réétalonnage",2003-04-04,3,['25.140.30'],ISO/TC 29/SC 10,9599,[13287],"[57030,57031,62549,62550,53388]","['en','fr']",15,"<p>ISO 6789:2003 specifies the requirements for, and describes the test methods and marking of, hand torque tools used for controlled tightening of bolted connections.</p><p

4848,IS,,ISO 679:1989,Methods of testing cements — Determination of strength,Méthodes d'essai des ciments — Détermination des résistances mécaniques,1989-06-29,1,['91.100.10'],ISO/TC 74,9599,[4847],"[45568,30139]","['en','fr']",14,"<p>Specifies a method of determining the compressive and flexural strengths of cement mortar and describes the reference procedure. Allows the use of alternative procedures only in well defined cases. Covers laboratory and equipment, mortar constituents, preparation of mortar and test specimens, curing of test specimens, and test procedures.</p>"

20801,IS,,ISO 6798:1995,Reciprocating internal combustion engines — Measurement of emitted airborne noise — Engineering method and survey method,Moteurs alternatifs à combustion interne — Mesurage du bruit aérien émis — Méthode d'expertise et méthode de contrôle,1995-12-27,1,"['27.020','17.140.20']",ISO/TC 70,9599,,"[72412,72411]","['en','fr']",15,"<p>Specifies methods for measuring the sound pressure levels on a measurement surface enveloping a sound source, and for calculating the sound power level produced by the source. May be used to perform acceptance tests.</p>"

13298,IS,,ISO 6799:1983,Animal and vegetable fats and oils — Determination of composition of the sterol fraction — Method by gas-liquid chromatography,Corps gras d'origines animale et végétale — Détermination de la composition de la fraction stérolique — Méthode par chromatographie en phase gazeuse,1983-05-01,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[13299],"['en','fr']",5,

3707,IS,,ISO 68-1:1998,ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads,Filetages ISO pour usages généraux — Profil de base — Partie 1: Filetages métriques,1998-12-20,1,['21.040.10'],ISO/TC 1,9599,[3706],[85107],"['en','fr']",3,<p>This part of ISO 68 specifies the basic profile for ISO general purpose metric screw threads (M).</p>

78731,IS,Amd,ISO 68-1:1998/Amd 1:2020,ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads — Amendment 1,Filetages ISO pour usages généraux — Profil de base — Partie 1: Filetages métriques — Amendement 1,2020-01-31,1,['21.040.10'],ISO/TC 1,9599,,[85107],"['en','fr']",1,

3706,IS,,ISO 68:1973,ISO general purpose screw threads — Basic profile,Filetages ISO pour usages généraux — Profil de base,1973-05-01,1,['21.040.01'],ISO/TC 1,9599,,"[27137,3707]","['en','fr']",3,

27137,IS,,ISO 68-2:1998,ISO general purpose screw threads — Basic profile — Part 2: Inch screw threads,Filetages ISO pour usages généraux — Profil de base — Partie 2: Filetages en inches,1998-12-20,1,['21.040.20'],ISO/TC 1,9599,[3706],[85106],"['en','fr']",4,<p>This part of ISO 68 specifies the basic profile for ISO inch screw threads.</p>

78730,IS,Amd,ISO 68-2:1998/Amd 1:2020,ISO general-purpose screw threads — Basic profile — Part 2: Inch screw threads — Amendment 1: The dimensions of basic profile,Filetages ISO pour usages généraux — Profil de base — Partie 2: Filetages en inches — Amendement 1: Les dimensions du profil de base,2020-01-31,1,['21.040.20'],ISO/TC 1,9599,,[85106],"['en','fr']",1,

4850,IS,,ISO 680:1990,Cement — Test methods — Chemical analysis,Ciments — Méthodes d'essai — Analyse chimique,1990-11-15,1,['91.100.10'],ISO/TC 74,9599,[4849],"[30140,45569,45624]","['en','fr']",21,"<p>Describes the procedures for the chemical analysis of cement. Gives the reference procedures and, in certain cases, an alternative method which can be considered as giving equivalent results. Applies to cements, and also to their constituent materials such as clinker and blastfurnace slag.</p>"

13300,IS,,ISO 6800:1985,Animal and vegetable fats and oils — Determination of the composition of fatty acids in the 2-position,Corps gras d'origines animale et végétale — Détermination de la composition des acides gras en position 2,1985-12-19,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[13301],"['en','fr']",5,

13302,IS,,ISO 6801:1983,Rubber or plastics hoses — Determination of volumetric expansion,Tuyaux en caoutchouc ou en plastique — Détermination de l'expansion volumique,1983-11-01,1,['23.040.70'],ISO/TC 45/SC 1,9599,,[81750],"['en','fr']",3,"<p>Specifies a test method for hoses under hydrostatic pressure. When used for dispensing specific volumes of fluids, the volumetric capacity of a hose is often required to vary by only small amounts at the dispensing pressure. The standard describes a method of checking that such requirements can be met. A figure shows the arrangement of the apparatus.</p>"

58031,IS,Amd,ISO 6801:1983/Amd 1:2011,Rubber or plastics hoses — Determination of volumetric expansion — Amendment 1: Deletion of alcohol as pressurizing fluid,Tuyaux en caoutchouc ou en plastique — Détermination de l'expansion volumique — Amendement 1: Suppression de l'alcool comme liquide de mise sous pression,2011-08-17,1,['23.040.70'],ISO/TC 45/SC 1,9599,,[81750],"['en','fr']",1,

13303,IS,,ISO 6802:1982,Rubber and plastics hose and hose assemblies — Wire reinforced — Hydraulic impulse test with flexing,Tuyaux et flexibles en caoutchouc et en plastique renforcés par des fils métalliques — Essai d'impulsions hydrauliques avec flexions,1982-11-01,1,['23.040.70'],ISO/TC 45/SC 1,9599,,[13304],"['en','fr']",2,

13304,IS,,ISO 6802:1991,Rubber and plastics hose and hose assemblies with wire reinforcements — Hydraulic impulse test with flexing,Tuyaux et flexibles en caoutchouc et en plastique renforcés par des fils métalliques — Essai d'impulsions hydrauliques avec flexions,1991-02-07,2,['23.040.70'],ISO/TC 45/SC 1,9599,[13303],[40256],"['en','fr']",2,"<p>This second edition cancels and replaces the first edition (ISO 6802 :1982), clause 5 of which has been technically revised. The rubber and plastics hoses are frequently flexed in service. As there may be a need to take this into account during testing, ISO 6802 provides a standard method of flexing during impulse testing. Uses a standard cycle durin