Withdrawn and superseded ISO standards — page 142 of 246

34151,IS,,ISO 6271-2:2004,Clear liquids — Estimation of colour by the platinum-cobalt scale — Part 2: Spectrophotometric method,Liquides clairs — Évaluation de la couleur au moyen de l'échelle platine-cobalt — Partie 2: Méthode spectrophotométrique,2004-11-23,1,['87.060.20'],ISO/TC 35,9599,,[63300],"['en','fr','ru']",4,"<p>ISO 6271-2:2004 specifies a spectrophotometric method for estimating the colour, in Pt-Co units, of clear liquids. It is applicable to clear liquids having a colour characteristic similar to those of the reference platinum-cobalt scale specified in ISO 6271-1, which describes a visual method.</p><p>The method described provides a more precise way of measuring Pt-Co colour

30940,IS,,ISO 6272-1:2002,"Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter",Peintures et vernis — Essais de déformation rapide (résistance au choc) — Partie 1: Essai de chute d'une masse avec pénétrateur de surface importante,2002-08-08,1,['87.040'],ISO/TC 35/SC 9,9599,[12556],[51922],"['en','fr']",7,"<p>ISO 6272-1:2002 describes a method for evaluating the resistance of a dry film of paint, varnish or related product to cracking or peeling from a substrate when it is subjected to a deformation caused by a falling weight, with a 20-mm-diameter spherical indenter, dropped under standard conditions.</p><p>The method describe

12556,IS,,ISO 6272:1993,Paints and varnishes — Falling-weight test,Peintures et vernis — Essai de chute d'une masse,1993-03-25,1,['87.040'],ISO/TC 35/SC 9,9599,[12555],"[33018,30940]","['en','fr']",6,"<p>Specifies a test method for evaluating the resistance of a dry film of paint, varnish or related product to cracking or peeling from a substrate when it is subjected to a deformation caused by a falling weight, dropped under standard conditions.</p>"

33018,IS,,ISO 6272-2:2002,"Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter",Peintures et vernis — Essais de déformation rapide (résistance au choc) — Partie 2: Essai de chute d'une masse avec pénétrateur de surface réduite,2002-08-08,1,['87.040'],ISO/TC 35/SC 9,9599,[12556],[50487],"['en','fr']",7,"<p>ISO 6272-2:2002 describes a method for rapidly deforming, by impact with a spherical indenter of diameter 12,7 mm or 15,9 mm, a coating film and its substrate and evaluating the effect of such deformation.</p>"

12557,IS,,ISO 6274:1982,Concrete — Sieve analysis of aggregates,Béton — Analyse par tamisage des granulats,1982-06-01,1,['91.100.30'],ISO/TC 71/SC 1,9599,,"[67541,67542,67543,74153]","['en','fr']",2,"<p>Specifies a method, using test sieves, for the determination of the particle size distribution of normal weight aggregates for concrete. Covers also sampling, apparatus, preparation of test sample, sieving, calculation and test report.</p>"

12558,IS,,ISO 6275:1982,"Concrete, hardened — Determination of density",Béton durci — Détermination de la masse volumique,1982-01-01,1,['91.100.30'],ISO/TC 71,9599,,"[40734,29101]","['en','fr']",2,"<p>Specifies a method of determining the density of hardened concrete. Applies to lightweight, normal weight and heavy weight concrete in normal, saturated and oven dried conditions. Covers also sampling, apparatus, determination of mass and volume of the sample, calculation and expression of results, and test report.</p>"

12559,IS,,ISO 6276:1982,"Concrete, compacted fresh — Determination of density",Béton frais compacté — Détermination de la masse volumique,1982-01-01,1,['91.100.30'],ISO/TC 71,9599,,[29098],"['en','fr']",1,"<p>Specifies a method of determining the density of compacted fresh concrete. Applies to lightweight, normal weight and heavy weight concrete. Covers also sampling, apparatus, procedure, expression of results and test report.</p>"

12560,IS,,ISO 6278:1980,Needle roller bearings — Track rollers — Boundary dimensions,Roulements à aiguilles — Galets de came — Dimensions d'encombrement,1980-03-01,1,['21.100.20'],ISO/TC 4/SC 5,9599,,[30240],"['en','fr']",4,"<p>Specifies the corresponding symbols. Figures show light and heavy series of track roller yoke type and stud type, respectively.</p>"

12561,IS,,ISO 6279:1979,Plain bearings — Aluminium alloy for solid bearings,Paliers lisses — Alliage d'aluminium pour paliers massifs,1979-02-01,1,"['77.150.10','21.100.10']",ISO/TC 123,9599,,[34007],"['en','fr']",2,<p>Specifies the composition and properties of a cast aluminium alloy for use in solid plain bearings. The alloy may or may not be subjected to cold work or heat treatment to increase strength. Gives also material designation and methods of test.</p>

34007,IS,,ISO 6279:2006,Plain bearings — Aluminium alloys for solid bearings,Paliers lisses — Alliages d'aluminium pour paliers massifs,2006-03-29,2,"['77.150.10','21.100.10']",ISO/TC 123/SC 2,9599,[12561],[70401],['en'],3,<p>ISO 6279:2006 specifies the composition and properties of preferred cast aluminium alloys for use in solid plain bearings.</p>

12562,IS,,ISO 6280:1981,Plain bearings — Requirements on backings for thick-walled multilayer bearings,Paliers lisses — Caractéristiques des supports pour coussinets multicouches épais,1981-11-01,1,['21.100.10'],ISO/TC 123/SC 2,9599,,[68678],"['en','fr']",1,"<p>Serves as a guide to obtain the optimum bond between backing and bearing metal for thick-walled multilayer plain bearings. This optimum bond depends on the chemical composition, the state of stress, the structural arrangement, and the machining of the bond surface of the backings.</p>"

36808,IS,,ISO 6281:2007,Plain bearings — Testing under conditions of hydrodynamic and mixed lubrication in test rigs,Paliers lisses — Essai des paliers lisses dans les conditions de lubrification hydrodynamique et mixte dans des machines d'essai pour paliers,2007-06-12,1,['21.100.10'],ISO/TC 123/SC 2,9599,[12563],[75746],['en'],16,"<p>ISO 6281:2007 establishes guidelines for the testing of lubricated plain journal bearings in test rigs, running under conditions of hydrodynamic or mixed lubrication, during bearing and/or material development. It deals with both static and dynamic loading in solid and multi‑layer journal bearings.</p>"

12565,IS,,ISO 6282:1983,"Plain bearings — Metallic thin-walled half bearings — Determination of the sigma 0,01*-limit","Paliers lisses — Demi-coussinets minces métalliques — Détermination de la limite élastique sigma 0,01*",1983-10-01,1,['21.100.10'],ISO/TC 123/SC 2,9599,[12564],[68677],"['en','fr']",3,"<p>Specifies a method for the steel backing of thin-walled multilayer half bearings for bearing diameters up to 80 mm. It can also be used for bearing diameters up to 160 mm. Gives definitions, apparatus, preparation of test specimen, procedure, expression of results and an annex.</p>"

12566,IS,,ISO 6283:1979,Refined nickel,Nickel raffiné,1979-10-01,1,['77.120.40'],ISO/TC 155,9599,,[20196],"['en','fr']",1,

20196,IS,,ISO 6283:1995,Refined nickel,Nickel raffiné,1995-09-21,2,['77.120.40'],ISO/TC 155,9599,[12566],[70444],"['en','fr']",2,<p>Specifies the designation and chemical composition of commercially available grades of refined nickel.</p>

12567,IS,,ISO 6284:1985,Tolerances for building — Indication of tolerances on building and construction drawings,Tolérances pour le bâtiment — Indication des tolérances sur les dessins de bâtiment et de génie civil,1985-08-15,1,['01.100.30'],ISO/TC 10/SC 8,9599,,[12568],"['en','fr']",5,

12568,IS,,ISO 6284:1996,Construction drawings — Indication of limit deviations,Dessins de génie civil — Indication des écarts limites,1996-12-12,2,['01.100.30'],ISO/TC 10/SC 8,9599,[12567],[82512],"['en','fr']",3,<p>Specifies methods for the indication of limit deviations on construction drawings.</p>

12571,IS,,ISO 6287:1980,Alpine skis — Binding mounting area for children and junior skis — Dimensions and requirements,Skis alpins — Zone de montage de la fixation des skis pour enfants et pour adolescents — Dimensions et exigences,1980-06-01,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[15520],['en'],3,

12572,IS,,ISO 6288:1980,Alpine skis — Binding mounting area for children and junior skis — Strength requirements and test method,Skis alpins — Zone de montage de la fixation des skis pour enfants et pour adolescents — Exigences de tenue et méthode d'essai,1980-06-01,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[15520],['en'],4,

12573,IS,,ISO 6289:1985,Skis — Terms and definitions,Skis — Termes et définitions,1985-11-07,1,"['97.220.20','01.040.97']",ISO/TC 83/SC 4,9599,[12098],[36160],"['en','fr','ru']",42,<p>Defines terms for the specification of important characteristics of alpine and cross-country skis (XC-skis). An annex gives the equivalent terms in German (only the terms and definitions given in the official languages can be considered as ISO-terms and definitions).</p>

12574,IS,Amd,ISO 6289:1985/Amd 1:1993,Skis — Terms and definitions — Amendment 1,Skis — Termes et définitions — Amendement 1,1993-02-18,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[36160],"['en','fr','ru']",5,<p>Replaces the existing definition of the term 'ski' (subclause 1.1).</p>

26742,IS,Amd,ISO 6289:1985/Amd 2:1997,Skis — Terms and definitions — Amendment 2,Skis — Termes et définitions — Amendement 2,1997-12-25,1,"['97.220.20','01.040.97']",ISO/TC 83/SC 4,9599,,[36160],"['en','fr']",2,

36160,IS,,ISO 6289:2003,Skis — Vocabulary,Skis — Vocabulaire,2003-08-19,2,"['97.220.20','01.040.97']",ISO/TC 83/SC 4,9599,"[12574,26742,12573]",[88022],"['en','fr']",32,"<p>ISO 6289:2003 defines terms for the specification of important characteristics of alpine, cross-country skis (XC-skis) and snowboards.</p>"

42160,IS,Cor,ISO 6289:2003/Cor 1:2005,Skis — Vocabulary — Technical Corrigendum 1,Skis — Vocabulaire — Rectificatif technique 1,2005-04-20,2,"['97.220.20','01.040.97']",ISO/TC 83/SC 4,9599,,[88022],"['en','fr']",2,

4750,IS,,ISO 629:1982,Steel and cast iron — Determination of manganese content — Spectrophotometric method,Aciers et fontes — Dosage du manganèse — Méthode spectrophotométrique,1982-11-01,1,['77.080.01'],ISO/TC 17/SC 1,9599,,[90370],"['en','fr']",4,"<p>The method is applicable to products having manganese contents between 0,001 and 4 % (m/m). Gives principle, reagents, apparatus, sampling, procedure, expression of results and test report.</p>"

12577,IS,,ISO 6292-1:1981,"Powered industrial trucks — Brake performance — Part 1: High-lift, low-lift and non-lifting","Chariots de manutention automoteurs — Capacité de freinage — Partie 1: Chariots élévateurs à grande levée, à petite levée et non élévateurs",1981-12-01,1,['53.060'],ISO/TC 110,9599,,[12576],"['en','fr']",3,

12576,IS,,ISO 6292:1996,Powered industrial trucks and tractors — Brake performance and component strength,Chariots de manutention et tracteurs industriels automoteurs — Capacité de freinage et résistance des éléments de frein,1996-12-19,1,['53.060'],ISO/TC 110/SC 2,9599,"[12875,12577]","[39977,40797]","['en','fr']",6,"<p>Specifies performance, test methods, control forces and component strengths for brakes fitted to powered industrial trucks with rated capacities up to 50 000 kg. Applicable to high-lift, low-lift, non-lifting powered industrial trucks and stacking lift trucks with operating platform. Replaces ISO 6292-1:1981 and ISO 6500:1980.</p>"

40797,IS,,ISO 6292:2008,Powered industrial trucks and tractors — Brake performance and component strength,Chariots de manutention et tracteurs industriels automoteurs — Performance de freinage et résistance des éléments de frein,2008-10-23,2,['53.060'],ISO/TC 110/SC 2,9599,[12576],"[70500,75277]","['en','fr']",12,"<p>ISO 6292:2008 specifies performance, test methods, controls, control forces and component strength for brake systems fitted to powered industrial trucks of all capacities, industrial tractors with rated capacities up to and including 20 000 N drawbar pull, burden carriers and industrial trucks handling freight containers, as defined in ISO 5053.</p><p>Loss of electrical power an

12578,IS,,ISO 6293:1983,Petroleum products — Determination of saponification number,Produits pétroliers — Détermination de l'indice de saponification,1983-09-01,1,['75.080'],ISO/TC 28,9599,,"[21191,27140]","['en','fr']",5,

12582,IS,,ISO 6297:1983,Petroleum products — Aviation and distillate fuels containing a static dissipator additive — Determination of electrical conductivity,Produits pétroliers — Carburants aviation et distillats contenant un additif destiné à éliminer l'électricité statique — Détermination de la conductivité électrique,1983-12-01,1,['75.160.20'],ISO/TC 28,9599,,[25982],"['en','fr']",4,

3701,IS,,ISO 63:1975,Flat transmission belts — Lengths,Courroies plates de transmission — Longueurs,1975-05-01,1,['21.220.10'],ISO/TC 41,9599,,[3609],"['en','fr']",1,

52321,IS,,ISO 630-1:2011,Structural steels — Part 1: General technical delivery conditions for hot-rolled products,Aciers de construction — Partie 1: Conditions générales techniques de livraison pour les produits laminés à chaud,2011-09-15,1,['77.140.01'],ISO/TC 17/SC 3,9599,"[4752,35544]",[73841],"['en','ru']",11,<p>ISO 630-1:2011 specifies the general technical delivery conditions for steel flat and long products (plate/sections/wide flats and bars) used principally for general-purpose structural steels. The steels specified in ISO 630-1:2011 are intended for use in welded or bolted structures.</p><p>The specific requirements for structural steels are given in the individual parts of ISO 6

4751,IS,,ISO 630:1980,Structural steels,Aciers de construction métallique,1980-11-01,1,"['77.140.60','77.140.70','77.140.50']",ISO/TC 17/SC 3,9599,,[4752],"['en','fr']",8,

4752,IS,,ISO 630:1995,"Structural steels — Plates, wide flats, bars, sections and profiles","Aciers de construction métallique — Tôles, larges-plats, barres, poutrelles et profilés",1995-11-09,2,['77.140.01'],ISO/TC 17/SC 3,9599,[4751],"[52322,54736,54737,52321]","['en','fr']",11,"<p>Applies to steel plates with thicknesses of 3 mm and over, wide strips in coils with widths greater than or equal to 600 mm, and greater than 6 mm in thickness, wide flats, bars and hot-rolled sections generally used in the as-delivered condition and normally intended for bolted, riveted structures.</p>"

35544,IS,Amd,ISO 630:1995/Amd 1:2003,"Structural steels — Plates, wide flats, bars, sections and profiles — Amendment 1","Aciers de construction métallique — Tôles, larges-plats, barres, poutrelles et profilés — Amendement 1",2003-12-02,2,['77.140.01'],ISO/TC 17/SC 3,9599,,"[52322,54736,54737,52321]","['en','fr']",1,

4753,IS,,ISO 630-2:2000,Structural steels — Part 2: Technical delivery requirements for hot-finished hollow sections,Aciers de construction — Partie 2: Conditions techniques de livraison pour profils creux de construction finis à chaud,2000-03-02,1,['77.140.75'],ISO/TC 5/SC 1,9599,,[52309],"['en','fr']",24,

52322,IS,,ISO 630-2:2011,Structural steels — Part 2: Technical delivery conditions for structural steels for general purposes,Aciers de construction — Partie 2: Conditions techniques de livraison pour aciers de construction métallique d'usage général,2011-09-15,2,['77.140.01'],ISO/TC 17/SC 3,9599,"[4752,35544]",[73842],"['en','ru']",13,"<p>ISO 630-2:2011 specifies qualities for steels for general structural use. ISO 630-2:2011 applies to steel plates rolled on a reversing mill, wide flats, hot-rolled sections and bars, which are used in the as-delivered condition and normally intended for welded or bolted structures.</p>"

54736,IS,,ISO 630-3:2012,Structural steels — Part 3: Technical delivery conditions for fine-grain structural steels,Aciers de construction — Partie 3: Conditions techniques de livraison pour aciers de construction à grains fins,2012-05-23,1,['77.140.01'],ISO/TC 17/SC 3,9599,"[4752,35544]",[73843],"['en','ru']",17,"<p>This part of ISO 630 specifies requirements for flat and long products of hot-rolled weldable fine-grain structural steels in the as-rolled (for SG grades only), normalized/normalized-rolled and thermomechanical-rolled delivery conditions. It applies to steel plates rolled on a reversing mill, wide flats, hot-rolled sections and bars, which are intended for use in heavily loaded

54737,IS,,ISO 630-4:2012,Structural steels — Part 4: Technical delivery conditions for high-yield-strength quenched and tempered structural steel plates,Aciers de construction — Partie 4: Conditions techniques de livraison pour tôles en acier de construction trempé et revenu à haute limite d'élasticité,2012-05-23,1,['77.140.01'],ISO/TC 17/SC 3,9599,"[4752,35544]",[73844],"['en','ru']",15,"<p>This part of ISO 630 specifies qualities for high-yield-strength quenched and tempered structural steels. This part of ISO 630 applies to steel plates rolled on a reversing mill which are used in the quenched and tempered condition and normally intended for welded or bolted structures.</p><p>This part of

60901,IS,,ISO 630-5:2014,Structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance,Aciers de construction — Partie 5: Conditions techniques de livraison pour aciers de construction à résistance améliorée à la corrosion atmosphérique,2014-09-15,1,['77.140.20'],ISO/TC 17/SC 3,9599,[39636],[81826],"['en','ru']",18,"<p>ISO 630-5:2014 specifies qualities for steels with improved atmospheric corrosion resistance for general structural use. It applies to steel plates rolled on a reversing mill, wide flats, hot-rolled sections and bars, which are used in the usual delivery conditions as given in 6.3, and normally intended for welde

60902,IS,,ISO 630-6:2014,Structural steels — Part 6: Technical delivery conditions for seismic-improved structural steels for building,Aciers de construction — Partie 6: Conditions techniques de livraison pour aciers de construction améliorés sismiques pour bâtiment,2014-09-15,1,"['77.140.70','91.120.25']",ISO/TC 17/SC 3,9599,[37127],[81827],"['en','ru']",16,"<p>ISO 630-6:2014 specifies qualities for seismic-proof improved structural steels. It applies to steel plates with thicknesses of 6 mm or over and up to 125 mm, wide flats and hot-rolled sections up to 140 mm, which are used in the usual delivery conditions as given in 6.2 and normally intended for welded or bolted structures.</p><p>It

12585,IS,,ISO 6301-1:1989,Pneumatic fluid power — Compressed air lubricators — Part 1: Main characteristics to be included in commercial literature and specific requirements,Transmissions pneumatiques — Lubrificateurs pour air comprimé — Partie 1: Principales caractéristiques à inclure dans la documentation commerciale et exigences particulières,1989-12-21,1,['23.100.99'],ISO/TC 131/SC 5,9599,,[21624],"['en','fr']",5,

21624,IS,,ISO 6301-1:1997,Pneumatic fluid power — Compressed-air lubricators — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements,Transmissions pneumatiques — Lubrificateurs pour air comprimé — Partie 1: Principales caractéristiques à inclure dans la documentation des fournisseurs et exigences de marquage du produit,1997-12-25,2,['23.100.99'],ISO/TC 131/SC 5,9599,[12585],[45825],"['en','fr']",7,

45825,IS,,ISO 6301-1:2009,Pneumatic fluid power — Compressed-air lubricators — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements,Transmissions pneumatiques — Lubrificateurs pour air comprimé — Partie 1: Principales caractéristiques à inclure dans la documentation du fournisseur et exigences de marquage du produit,2009-02-16,3,['23.100.99'],ISO/TC 131/SC 5,9599,[21624],[67813],"['en','fr']",7,<p>ISO 6301-1:2009 specifies which characteristics of compressed-air lubricators are to be included in the supplier's literature.</p><p>ISO 6301-1:2009 also specifies product-marking requirements for lubricators.</p>

12586,IS,,ISO 6301-2:1997,Pneumatic fluid power — Compressed-air lubricators — Part 2: Test methods to determine the main characteristics to be included in supplier's literature,Transmissions pneumatiques — Lubrificateurs pour air comprimé — Partie 2: Méthodes d'essai pour déterminer les principales caractéristiques à inclure dans la documentation du fournisseur,1997-12-25,1,['23.100.99'],ISO/TC 131/SC 5,9599,,[39277],"['en','fr']",6,

39277,IS,,ISO 6301-2:2006,Pneumatic fluid power — Compressed-air lubricators — Part 2: Test methods to determine the main characteristics to be included in supplier's literature,Transmissions pneumatiques — Lubrificateurs pour air comprimé — Partie 2: Méthodes d'essai pour déterminer les principales caractéristiques à inclure dans la documentation du fournisseur,2006-08-28,2,['23.100.99'],ISO/TC 131/SC 5,9599,[12586],[74341],"['en','fr']",5,"<p>This part of ISO 6301:2006 specifies tests, procedures and a method of presenting the results concerning the parameters that define the main characteristics to be included in the supplier's literature of lubricators conforming to ISO 6301-1.</p><p>Thi

12587,IS,,ISO 6302:1979,"Earth-moving machinery — Drain, fill and level plugs","Engins de terrassement — Bouchons de vidange, de remplissage et de contrôle des niveaux",1979-02-01,1,['53.100'],ISO/TC 127/SC 3,9599,,[12588],['en'],4,

12588,IS,,ISO 6302:1986,"Earth-moving machinery — Drain, fill and level plugs","Engins de terrassement — Bouchons de vidange, de remplissage et de contrôle des niveaux",1986-06-19,2,['53.100'],ISO/TC 127/SC 3,9599,[12587],[21466],"['en','fr']",4,

12591,IS,,ISO 6305-2:1983,Railway components — Technical delivery requirements — Part 2: Unalloyed carbon steel baseplates,Éléments constitutifs de la voie ferrée — Spécifications techniques de livraison — Partie 2: Selles en acier au carbone non allié,1983-10-01,1,['45.080'],ISO/TC 17/SC 15,9599,,[41975],"['en','fr']",8,"<p>This part of ISO 6305 specifies the quality requirements of the product and the conditions of acceptance testing for baseplates. Includes conditions of manufacture, of acceptance testing, and information to be supplied by the purchaser. Annex A includes the checking of dimensions and tolerances. and annexes B and C contain progressive sampling plans.</p>"

75470,IS,,ISO 6306:2019,Chemical analysis of steel — Order of listing elements in steel standards,Analyse chimique des aciers — Ordre de report des éléments dans les normes d'acier,2019-07-25,1,['77.080.20'],ISO/TC 17/SC 4,9599,,[80190],['en'],3,"<p>This document specifies an order for listing elements within the chemical composition of steels and most other iron-based alloys, excluding foundry irons.</p><p>NOTE This document has been developed and is used by ISO/TC 17/SC 4, but can also be used by other ISO/TC 17 subcommittees.</p>"

12596,IS,,ISO 6309:1987,Fire protection — Safety signs,Protection contre l'incendie — Signaux de sécurité,1987-08-27,1,"['13.220.01','01.080.99']",ISO/TC 21,9599,,[54432],"['en','fr']",8,<p>Applicable to all situations in which it is necessary or desirable to indicate publicity the location and/or the nature of means of giving warning of fire and manual controls; means of escape from fire; means of fire-fighting; means of preventing fire spreading; areas or materials of special fire risk. Does not apply to graphical symbols used on plans or maps.</p>

12597,IS,,ISO 6310:1981,Road vehicles — Brake linings — Compressibility — Test procedure,Véhicules routiers — Garnitures de freins — Compressibilité — Procédure d'essai,1981-07-01,1,['43.040.40'],ISO/TC 22,9599,,[21932],"['en','fr']",4,

21932,IS,,ISO 6310:2001,Road vehicles — Brake linings — Compressive strain test method,Véhicules routiers — Garnitures de freins — Méthode d'essai de la compressibilité,2001-02-08,2,['43.040.40'],ISO/TC 22,9599,[12597],[46271],"['en','fr']",13,

12599,IS,,ISO 6312:1981,Road vehicles — Brake linings — Shear strength of disc brake pad and drum brake shoe assemblies — Test procedure,Véhicules routiers — Garnitures de frein — Résistance au cisaillement des ensembles de plaquettes de frein à disque et de segments de frein à tambour — Méthode d'essai,1981-03-01,1,['43.040.40'],ISO/TC 22,9599,,[21933],"['en','fr']",4,

21933,IS,,ISO 6312:2001,Road vehicles — Brake linings — Shear test procedure for disc brake pad and drum brake shoe assemblies,Véhicules routiers — Garnitures de freins — Méthode d'essai au cisaillement des ensembles de plaquettes de freins à disque et segments de freins à tambour,2001-02-22,2,['43.040.40'],ISO/TC 22,9599,[12599],[46272],"['en','fr']",9,

12603,IS,,ISO 6316:1982,Hot-rolled steel strip of structural quality,Feuillards laminés à chaud en acier de construction,1982-11-01,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[12604],"['en','fr']",6,

12604,IS,,ISO 6316:1993,Hot-rolled steel strip of structural quality,Feuillards laminés à chaud en acier de construction,1993-10-28,2,['77.140.50'],ISO/TC 17/SC 12,9599,[12603],[30955],"['en','fr']",7,

30955,IS,,ISO 6316:2000,Hot-rolled steel strip of structural quality,Feuillards laminés à chaud en acier de construction,2000-07-06,3,['77.140.50'],ISO/TC 17/SC 12,9599,[12604],[43291],"['en','fr']",9,

43291,IS,,ISO 6316:2008,Hot-rolled steel strip of structural quality,Feuillards laminés à chaud en acier de construction,2008-05-19,4,['77.140.50'],ISO/TC 17/SC 12,9599,[30955],[60962],"['en','ru']",10,"<p>ISO 6316:2008 specifies requirements for hot-rolled steel strip of structural quality in the grades and classes listed in a table, usually without the use of microalloying elements. This product is intended for structural purposes where particular mechanical properties are required. It is generally used in the delivered condition and is intended for bolted, riveted or welded structures. It is commonly rolled on a narrow strip mill. </p><p>ISO 6316:2008 does not cover steels designated as c

12605,IS,,ISO 6317:1982,Hot-rolled carbon steel strip of commercial and drawing qualities,Feuillards en acier au carbone laminés à chaud de qualité commerciale et pour emboutissage,1982-11-01,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[28048],"['en','fr']",6,

28048,IS,,ISO 6317:2000,Hot-rolled carbon steel strip of commercial and drawing qualities,Feuillards en acier au carbone laminés à chaud de qualités commerciale et pour emboutissage,2000-07-06,2,['77.140.50'],ISO/TC 17/SC 12,9599,[12605],[43292],"['en','fr']",10,

12606,IS,,ISO 6318:1985,"Measurement of roundness — Terms, definitions and parameters of roundness","Mesurage de la circularité — Termes, définitions et paramètres de circularité",1985-08-15,1,"['17.040.20','01.040.17']",ISO/TC 213,9599,,[38355],"['en','fr']",5,

12607,IS,,ISO 6320:1983,Animal and vegetable fats and oils — Determination of refractive index,Corps gras d'origines animale et végétale — Détermination de l'indice de réfraction,1983-07-01,1,['67.200.10'],ISO/TC 34/SC 11,9599,,"[12608,12609]","['en','fr']",2,

12608,IS,,ISO 6320:1985,Animal and vegetable fats and oils — Determination of refractive index,Corps gras d'origines animale et végétale — Détermination de l'indice de réfraction,1985-12-19,2,['67.200.10'],ISO/TC 34/SC 11,9599,[12607],[12609],"['en','fr']",2,

12609,IS,,ISO 6320:1995,Animal and vegetable fats and oils — Determination of refractive index,Corps gras d'origines animale et végétale — Détermination de l'indice de réfraction,1995-08-17,3,['67.200.10'],ISO/TC 34/SC 11,9599,"[12607,12608]",[32437],"['en','fr']",3,

32437,IS,,ISO 6320:2000,Animal and vegetable fats and oils — Determination of refractive index,Corps gras d'origines animale et végétale — Détermination de l'indice de réfraction,2000-03-16,4,['67.200.10'],ISO/TC 34/SC 11,9599,"[12609,30838]",[71267],"['en','fr']",6,

44048,IS,Cor,ISO 6320:2000/Cor 1:2006,Animal and vegetable fats and oils — Determination of refractive index — Technical Corrigendum 1,Corps gras d'origines animale et végétale — Détermination de l'indice de réfraction — Rectificatif technique 1,2006-03-10,4,['67.200.10'],ISO/TC 34/SC 11,9599,,[71267],"['en','fr']",2,

12610,IS,,ISO 6321:1991,Animal and vegetable fats and oils — Determination of melting point in open capillary tubes (slip point),Corps gras d'origines animale et végétale — Détermination du point de fusion en tube capillaire ouvert,1991-09-05,1,['67.200.10'],ISO/TC 34/SC 11,9599,,"[22125,35243]","['en','fr']",5,"<p>Specifies two methods: method A applies only to animal and vegetable fats which do not exhibit pronounced polymorphism; method B applies to all animal and vegetable fats, and shall be used where polymorphic behaviour is unknown.</p>"

27492,IS,Amd,ISO 6321:1991/Amd 1:1998,Animal and vegetable fats and oils — Determination of melting point in open capillary tubes (slip point) — Amendment 1: Palm oil samples,Corps gras d'origines animale et végétale — Détermination du point de fusion en tube capillaire ouvert — Amendement 1: Echantillons d'huile de palme,1998-03-19,1,['67.200.10'],ISO/TC 34/SC 11,9599,,[35243],"['en','fr']",3,

35243,IS,,ISO 6321:2002,Animal and vegetable fats and oils — Determination of melting point in open capillary tubes (slip point),Corps gras d'origines animale et végétale — Détermination du point de fusion en tube capillaire ouvert,2002-03-14,2,['67.200.10'],ISO/TC 34/SC 11,9599,"[12610,27492]",[81472],"['en','fr']",11,

12611,IS,,ISO 6322-1:1981,Storage of cereals and pulses — Part 1: General considerations in keeping cereals,Stockage des céréales et des légumineuses — Partie 1: Considérations générales sur la conservation des céréales,1981-05-01,1,['67.060'],ISO/TC 34/SC 4,9599,,[21396],"['en','fr']",8,

12612,IS,,ISO 6322-2:1981,Storage of cereals and pulses — Part 2: Essential requirements,Stockage des céréales et des légumineuses — Partie 2: Principales conditions requises,1981-06-01,1,['67.060'],ISO/TC 34/SC 4,9599,,[21395],"['en','fr']",6,

12613,IS,,ISO 6322-3:1981,Storage of cereals and pulses — Part 3: Control of attack by vertebrate and invertebrate animals,Stockage des céréales et des légumineuses — Partie 3: Contrôle de l'attaque par les animaux vertébrés et invertébrés,1981-07-01,1,['67.060'],ISO/TC 34/SC 4,9599,,[12614],"['en','fr']",6,

12615,IS,,ISO 6325:1979,Shipbuilding — Cable stoppers,Construction navale — Stoppeurs de chaîne,1979-12-01,1,['47.020.50'],ISO/TC 8/SC 4,9599,,[12616],"['en','fr']",4,

12616,IS,,ISO 6325:1987,Shipbuilding — Cable stoppers,Construction navale — Stoppeurs de chaîne,1987-07-16,2,['47.020.50'],ISO/TC 8/SC 4,9599,[12615],[84467],"['en','fr']",4,"<p>Specifies requirements for the function, operation, design, construction, safety and strength for use with marine windlasses and anchor capstans.</p>"

12617,IS,,ISO 6326-1:1989,Natural gas — Determination of sulfur compounds — Part 1: General introduction,Gaz naturel — Détermination des composés soufrés — Partie 1: Introduction générale,1989-06-22,1,['75.060'],ISO/TC 193/SC 1,9599,,"[25106,42932]","['en','fr']",4,<p>Gives a rapid comparison of standardized methods and therefore provides information for the choice of the method. The other parts of ISO 6326 describe in detail the various standardized methods. Tabulates methods for the determination of sulfur components in natural gas.</p>

12618,IS,,ISO 6326-2:1981,Gas analysis — Determination of sulphur compounds in natural gas — Part 2: Gas chromatographic method using an electrochemical detector for the determination of odoriferous sulphur compounds,Analyse des gaz — Détermination des composés soufrés dans le gaz naturel — Partie 2: Méthode par chromatographie en phase gazeuse avec détecteur électrochimique pour la détermination des composés soufrés odorants,1981-07-01,1,['75.060'],ISO/TC 193/SC 1,9599,,"[33938,29671]","['en','fr']",5,"<p>Specifies a method for the qualitative and quantitative analysis of sulphur compounds which may occur naturally in natural gas and remain as traces after treatment, or they have been injec

12619,IS,,ISO 6326-3:1989,"Natural gas — Determination of sulfur compounds — Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry","Gaz naturel — Détermination des composés soufrés — Partie 3: Détermination du sulfure d'hydrogène, des thiols et du sulfure de carbonyle par potentiométrie",1989-06-22,1,['75.060'],ISO/TC 193/SC 1,9599,,[25107],"['en','fr']",5,"<p>Specifies a potentiometric method for components in natural gas in the concentration range equal to or above 1 mg/m3. The gas must be free of dust, mist, oxygen, hydrogen cyanide and carbon disulfide. The method is not recommended for gases containing more than approximately 1,5 % (V/

12620,IS,,ISO 6326-4:1994,"Natural gas — Determination of sulfur compounds — Part 4: Gas chromatographic method using a flame photometric detector for the determination of hydrogen sulfide, carbonyl sulfide and sulfur-containing odorants","Gaz naturel — Détermination des composés soufrés — Partie 4: Détermination du sulfure d'hydrogène, du sulfure de carbonyle et des composés soufrés malodorants par chromatographie en phase gazeuse avec détecteur à photométrie de flamme",1994-01-27,1,['75.060'],ISO/TC 193/SC 1,9599,,[33938],['en'],7,"<p>The method specified uses a single temperature-programmed column, and a sulfur-selective flame photometric detector. It is applicable to the determination of

12621,IS,,ISO 6326-5:1989,Natural gas — Determination of sulfur compounds — Part 5: Lingener combustion method,Gaz naturel — Détermination des composés soufrés — Partie 5: Méthode de combustion Lingener,1989-06-22,1,['75.060'],ISO/TC 193/SC 1,9599,,[25108],"['en','fr']",9,"<p>Specifies a method for the determination of total sulphur in natural gas. It is applicable to gases with sulphur contents between 0,5 mg/m3 and 1 000 mg/m3. With a total sulphur content of more than 0,1 mg sulphur in the absorption solution, visual titration with an indicator can be chosen, whereas for lower contents turbidimetric titration is preferable.</p>"

12623,IS,,ISO 6328:1982,Photography — Photographic materials — Determination of ISO resolving power,Photographie — Surfaces sensibles — Détermination du pouvoir résolvant,1982-09-01,1,['37.040.20'],ISO/TC 42,9599,,[22022],"['en','fr']",9,

4757,IS,,ISO 633:1986,Cork — Vocabulary,Liège — Vocabulaire,1986-05-08,1,"['79.100','01.040.79']",ISO/TC 87,9599,[4756],"[4758,38938]","['en','fr']",12,<p>Constitutes a technical revision of ISO Recommendation R 633-1967. Determines and defines the terms to be used in describing the various states in which cork may be found and the principal products manufactured therefrom. Terms and definitions and an alphabetical index are given in English and French.</p>

38938,IS,,ISO 633:2007,Cork — Vocabulary,Liège — Vocabulaire,2007-06-22,2,"['79.100','01.040.79']",ISO/TC 87,9599,[4757],[67048],"['en','fr']",31,"<p>ISO 633:2007 defines cork as a raw material for the industry as well as the terms to be used in describing the different forms in which cork may be found. It also indicates the terms and definitions concerning its main products, some of the operations to which cork may be submitted and anomalies that may be associated with it. The terms and defintions and the alphabetical index are given in English and French.</p>"

12626,IS,,ISO 6330:1984,Textiles — Domestic washing and drying procedures for textile testing,Textiles — Méthodes de lavage et de séchage domestiques,1984-12-01,1,['59.080.01'],ISO/TC 38/SC 2,9599,,"[32908,12627]","['en','fr']",6,

32908,IS,,ISO 6330:2000,Textiles — Domestic washing and drying procedures for textile testing,Textiles — Méthodes de lavage et de séchage domestiques en vue des essais des textiles,2000-12-21,2,['59.080.01'],ISO/TC 38/SC 2,9599,[12626],[43044],"['en','fr']",13,

44422,IS,Amd,ISO 6330:2000/Amd 1:2008,Textiles — Domestic washing and drying procedures for textile testing — Amendment 1,Textiles — Méthodes de lavage et de séchage domestiques en vue des essais des textiles — Amendement 1,2008-09-08,2,['59.080.01'],ISO/TC 38/SC 2,9599,,[43044],"['en','fr']",9,

43044,IS,,ISO 6330:2012,Textiles — Domestic washing and drying procedures for textile testing,Textiles — Méthodes de lavage et de séchage domestiques en vue des essais des textiles,2012-04-13,3,['59.080.01'],ISO/TC 38/SC 2,9599,"[32908,44422]",[75934],"['en','fr']",33,"<p><b>1.1 </b>This International Standard specifies domestic washing and drying procedures for textile testing. The</p><p>procedures are applicable to textile fabrics, garments or other textile articles which are subjected to appropriate</p><p>combinations of domestic washing and drying procedures. This International Standard also specifies the</p><p>reference detergents and ballasts for the procedures.</p><p><b>1.2 </b>Provis

12628,IS,,ISO 6331:1983,Chromium ores and concentrates — Determination of chromium content — Titrimetric method,Minerais et concentrés de chrome — Dosage du chrome — Méthode titrimétrique,1983-11-01,1,['73.060.30'],ISO/TC 132,9599,,[83914],"['en','fr']",4,"<p>The method is applicable to products having a chromium content greater than 7 % (m/m). Should be read in conjunction with ISO 6629. Specifies principle, reagents, apparatus, procedure and expression of results.</p>"

12629,IS,,ISO 6332:1982,"Water analysis — Determination of iron — 1,10-phenanthroline photometric method","Analyse de l'eau — Dosage du fer — Méthode spectrophotométrique à la phénanthroline-1,10",1982-12-01,1,['13.060.50'],ISO/TC 147/SC 2,9599,,[12630],"['en','fr']",5,

12632,IS,,ISO 6336-1:1996,"Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors","Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale — Partie 1: Principes de base, introduction et facteurs généraux d'influence",1996-05-09,1,['21.200'],ISO/TC 60/SC 2,9599,,[36327],"['en','fr']",93,"<p>Provides together with parts 2, 3 and 5 a method by which different gear designs can be compared. It is not intended to assure the performance of gear systems. Preferably intended for use by the experienced gear designer.</p>"

30962,IS,Cor,ISO 6336-1:1996/Cor 1:1998,"Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors — Technical Corrigendum 1","Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale — Partie 1: Principes de base, introduction et facteurs généraux d'influence — Rectificatif technique 1",1998-10-15,1,['21.200'],ISO/TC 60/SC 2,9599,,[36327],['en'],2,

32459,IS,Cor,ISO 6336-1:1996/Cor 2:1999,"Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors — Technical Corrigendum 2","Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale — Partie 1: Principes de base, introduction et facteurs généraux d'influence — Rectificatif technique 2",1999-09-09,1,['21.200'],ISO/TC 60/SC 2,9599,,[36327],['en'],3,

36327,IS,,ISO 6336-1:2006,"Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors","Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale — Partie 1: Principes de base, introduction et facteurs généraux d'influence",2006-09-04,2,['21.200'],ISO/TC 60/SC 2,9599,"[12632,30962,32459]",[63819],"['en','fr']",109,"<p>ISO 6336-1:2006 presents the basic principles of, an introduction to, and the general influence factors for, the calculation of the load capacity of spur and helical gears. Together with ISO 6336-2, ISO 6336-3, ISO 6336-5 and ISO 6336-6, it provides a method by which different

51337,IS,Cor,ISO 6336-1:2006/Cor 1:2008,"Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors — Technical Corrigendum 1","Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale — Partie 1: Principes de base, introduction et facteurs généraux d'influence — Rectificatif technique 1",2008-05-26,2,['21.200'],ISO/TC 60/SC 2,9599,,[63819],"['en','fr']",2,

12633,IS,,ISO 6336-2:1996,Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting),Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale — Partie 2: Calcul de la résistance à la pression de contact (piqûres),1996-06-13,1,['21.200'],ISO/TC 60/SC 2,9599,,[36328],"['en','fr']",31,<p>Gives the fundamental formulae for use in the determination of the load capacity of cylindrical gears with involute internal or external teeth.</p>

30963,IS,Cor,ISO 6336-2:1996/Cor 1:1998,Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting) — Technical Corrigendum 1,Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale — Partie 2: Calcul de la résistance à la pression de contact (piqûres) — Rectificatif technique 1,1998-10-15,1,['21.200'],ISO/TC 60/SC 2,9599,,[36328],['en'],1,

32460,IS,Cor,ISO 6336-2:1996/Cor 2:1999,Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting) — Technical Corrigendum 2,Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale — Partie 2: Calcul de la résistance à la pression de contact (piqûres) — Rectificatif technique 2,1999-09-02,1,['21.200'],ISO/TC 60/SC 2,9599,,[36328],['en'],1,

36328,IS,,ISO 6336-2:2006,Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting),Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale — Partie 2: Calcul de la résistance à la pression de contact (piqûre),2006-09-04,2,['21.200'],ISO/TC 60/SC 2,9599,"[32460,12633,30963]",[63821],"['en','fr']",33,"<p>ISO 6336-2:2006 specifies the fundamental formulas for use in the determination of the surface load capacity of cylindrical gears with involute external or internal teeth. It includes formulas for all influences on surface durability for which quantitative assessments can be made. It applies primarily to o

51339,IS,Cor,ISO 6336-2:2006/Cor 1:2008,Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting) — Technical Corrigendum 1,Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale — Partie 2: Calcul de la résistance à la pression de contact (piqûre) — Rectificatif technique 1,2008-05-26,2,['21.200'],ISO/TC 60/SC 2,9599,,[63821],"['en','fr']",2,

12634,IS,,ISO 6336-3:1996,Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength,Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale — Partie 3: Calcul de la résistance à la flexion en pied de dent,1996-06-13,1,['21.200'],ISO/TC 60/SC 2,9599,,[36329],"['en','fr']",76,<p>Gives the fundamental formulae for use in tooth bending strength calculations for involute internal and external gears with a minimum rim thickness under the root.</p>