Withdrawn and superseded ISO standards — page 141 of 246

50545,IS,,ISO 6183:2009,Fire protection equipment — Carbon dioxide extinguishing systems for use on premises — Design and installation,Équipement de protection contre l'incendie — Installations fixes d'extinction par dioxyde de carbone utilisées dans les bâtiments — Conception et installation,2009-06-09,2,['13.220.10'],ISO/TC 21/SC 8,9599,"[12117,12437]","[67743,74513]","['en','fr']",54,"<p>ISO 6183:2009 specifies requirements and gives recommendations for the design, installation, testing, maintenance and safety of fixed carbon dioxide firefighting systems in buildings, plant or other structures. It is not applicable to extinguishing systems on ships, in aircraft, on vehicles and mobile fir

72829,IS,Amd,ISO 6183:2009/Amd 1:2017,Fire protection equipment — Carbon dioxide extinguishing systems for use on premises — Design and installation — Amendment 1,Équipement de protection contre l'incendie — Installations fixes d'extinction par dioxyde de carbone utilisées dans les bâtiments — Conception et installation — Amendement 1,2017-08-18,2,['13.220.10'],ISO/TC 21/SC 8,9599,,[74513],['en'],1,

78008,IS,Amd,ISO 6183:2009/Amd 2:2019,Fire protection equipment — Carbon dioxide extinguishing systems for use on premises — Design and installation — Amendment 2,Équipement de protection contre l'incendie — Installations fixes d'extinction par dioxyde de carbone utilisées dans les bâtiments — Conception et installation — Amendement 2,2019-12-04,2,['13.220.10'],ISO/TC 21/SC 8,9599,,[74513],['en'],1,

12442,IS,,ISO 6185:1982,Shipbuilding and marine structures — Inflatable boats — Boats made of reinforced elastomers or plastomers,Construction navale et structures maritimes — Bateaux pneumatiques — Bateaux construits en élastomères ou plastomères renforcés,1982-04-01,1,['47.080'],ISO/TC 188,9599,,"[34126,34124,34125,38415]","['en','fr']",7,"<p>Specifies the minimum safety characteristics required for the design, materials to use, manufacture and testing of inflatable boats. Is applicable to inflatable boats made of reinforced plastomers and elastomers capable of carrying at least one person weighing 75 kg without dimensional limitation. Is not applicable to inflatable life rafts.</p>" 12443

34126,IS,,ISO 6185-3:2001,Inflatable boats — Part 3: Boats with a maximum motor power rating of 15 kW and greater,Bateaux pneumatiques — Partie 3: Bateaux équipés d'un moteur d'une puissance maximale supérieure ou égale à 15 kW,2001-11-29,1,['47.080'],ISO/TC 188,9599,[12442],[60201],"['en','fr']",23,

60201,IS,,ISO 6185-3:2014,Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater,Bateaux pneumatiques — Partie 3: Bateaux d'une longueur de coque inférieure à 8 m et d'une puissance moteur assignée supérieure ou égale à 15 kW,2014-08-07,2,['47.080'],ISO/TC 188,9599,[34126],[82151],"['en','fr']",30,"<p>ISO 6185-3:2014 specifies the minimum safety characteristics required for the design, materials to use, manufacture and testing of inflatable boats and rigid inflatable boats with a hull length in accordance with ISO 8666 less than 8 m with a motor power rating of 15 kW and greater.</p><p>ISO 6185:2014 is applicable to the following types of b

12444,IS,,ISO 6186:1980,Plastics — Determination of pourability,Plastiques — Détermination de l'aptitude à l'écoulement,1980-08-01,1,['83.080.20'],ISO/TC 61/SC 9,9599,,[25202],"['en','fr']",2,

25202,IS,,ISO 6186:1998,Plastics — Determination of pourability,Plastiques — Détermination de l'aptitude à l'écoulement,1998-06-11,2,['83.080.20'],ISO/TC 61/SC 5,9599,[12444],"[82419,82420,83906]","['en','fr']",5,

12446,IS,,ISO 6188:1980,Plastics — Poly(ethylene terephthalate) granules — Determination of water content,Plastiques — Poly(éthylène téréphtalate) en granules — Détermination de la teneur en eau,1980-03-01,1,['83.080.20'],ISO/TC 61,9599,,[12447],"['en','fr']",3,

12447,IS,,ISO 6188:1986,Plastics — Poly(alkylene terephthalate) granules — Determination of water content,Plastiques — Poly(alkylène téréphtalate) en granules — Détermination de la teneur en eau,1986-08-14,2,['83.080.20'],ISO/TC 61/SC 9,9599,[12446],"[27994,27076]","['en','fr']",3,

12448,IS,,ISO 6189:1983,Acoustics — Pure tone air conduction threshold audiometry for hearing conservation purposes,Acoustique — Audiométrie liminaire tonale en conduction aérienne pour les besoins de la préservation de l'ouïe,1983-12-01,1,['13.140'],ISO/TC 43,9599,,[43601],"['en','fr']",9,<p>Specifies procedures and requirements without masking that are applicable to individuals whose hearing sensiticity might be adversely affected by occupational noise exposure and presents techniques for automatic recording and manual audiometry.</p>

12452,IS,,ISO 6193:1980,Rolling bearings — Needle rollers — Tolerances,Roulements — Aiguilles — Tolérances,1980-05-01,1,['21.100.20'],ISO/TC 4,9599,,[20526],"['en','fr']",4,

12453,IS,,ISO 6194-1:1982,Rotary shaft lip type seals — Part 1: Nominal dimensions and tolerances,Bagues d'étanchéité à lèvre pour arbres tournants — Partie 1: Dimensions nominales et tolérances,1982-10-01,1,"['83.140.50','23.100.60']",ISO/TC 131/SC 7,9599,,[34678],"['en','fr']",7,<p>This part lays down the nominal dimensions relating to seals suitable for shafts from 6 to 400 mm diameter and accompanying housings from 16 to 440 mm. Seals of this type are not normally suitable for high pressure. Includes dimensional limits for the shafts and housings to assure interchangeability of seals from different manufacturers. The six basic types of seals are described and shown in figure 1. The annex

12454,IS,,ISO 6194-2:1991,Rotary shaft lip type seals — Part 2: Vocabulary,Bagues d'étanchéité à lèvres pour arbres tournants incorporant des éléments d'étanchéité en élastomère — Partie 2: Vocabulaire,1991-08-25,1,"['83.140.50','23.100.60','01.040.83','01.040.23']",ISO/TC 131/SC 7,9599,,"[45846,30055]","['en','fr']",18,"<p>Gives technical terms and definitions in English and French, and gives the equivalent terms in German, Italian, Japanese, Russian and Swedish.</p>"

12455,IS,,ISO 6194-3:1988,"Rotary shaft lip type seals — Part 3: Storage, handling and installation","Bagues d'étanchéité à lèvre pour arbres tournants — Partie 3: Stockage, manipulation et montage",1988-10-20,1,"['83.140.50','23.100.60']",ISO/TC 131/SC 7,9599,,[43009],"['en','fr']",7,"<p>This part gives lip seal users a guidance; attention is drawn to the hazards involved (temperature, ozone, humidity, radioactive materials, fumes, insects, rodents, dust, grit, mechanical damage) and ways of avoiding them are pointed out. The installation of the various types of seals by means of an installation tool is described and illustrated (figures 1 to 6).</p>"

12456,IS,,ISO 6194-4:1988,Rotary shaft lip type seals — Part 4: Performance test procedures,Bagues d'étanchéité à lèvre pour arbres tournants — Partie 4: Méthodes d'essai de performance,1988-03-03,1,"['83.140.50','23.100.60']",ISO/TC 131/SC 7,9599,,[25461],"['en','fr']",3,

25461,IS,,ISO 6194-4:1999,Rotary shaft lip type seals — Part 4: Performance test procedures,Bagues d'étanchéité à lèvre pour arbres tournants — Partie 4: Méthodes d'essai de performance,1999-05-06,2,"['83.140.50','23.100.60']",ISO/TC 131/SC 7,9599,[12456],[43010],"['en','fr']",15,

12457,IS,,ISO 6194-5:1990,Rotary shaft lip type seals — Part 5: Identification of visual imperfections,Bagues d'étanchéité à lèvre pour arbres tournants — Partie 5: Identification des imperfections visuelles,1990-12-20,1,"['83.140.50','23.100.60']",ISO/TC 131/SC 7,9599,,[42162],"['en','fr']",7,"<p>This part shows and identifies visual imperfections on typical rotary shaft lip type seals, dimensionally standardized in ISO 6194-1, as a convenience for purchasers and manufacturers in their discussions about the importance of imperfections in different applications. It defines and classifies typical surface imperfections that often impair the function of the rotary shaft lip type seal.</p>" 1245

12458,IS,,ISO 6195:1986,Fluid power systems and components — Cylinders — Housings for rod wiper rings in reciprocating applications — Dimensions and tolerances,Transmissions hydrauliques et pneumatiques — Vérins — Logements de joints racleurs pour tiges de piston à mouvement linéaire — Dimensions et tolérances,1986-12-11,1,['23.100.20'],ISO/TC 131/SC 7,9599,,[30056],"['en','fr']",6,"<p>Lays down the dimensions and tolerances; the range of sizes is from 6 mm to 360 mm rod diameters. Includes the following three housing designs: - type A: recess housings with undercut or separate cover to retain elastomeric wipers (preferred); - type B: open recess housings for wipers having integral rigid rei

30056,IS,,ISO 6195:2002,Fluid power systems and components — Cylinder-rod wiper-ring housings in reciprocating applications — Dimensions and tolerances,Transmissions hydrauliques et pneumatiques — Logements de joints racleurs pour tiges de piston à mouvement linéaire de vérins — Dimensions et tolérances,2002-11-25,2,['23.100.20'],ISO/TC 131/SC 7,9599,[12458],[54084],"['en','fr']",13,"<p>ISO 6195:2002 specifies dimensions and tolerances of housings for wiper rings used in reciprocating rod applications for fluid power cylinders. The range of rod diameters is from 4 mm to 360 mm.</p><p>ISO 6195:2002 is applicable to the following four housing designs.</p><ul><li>Type A: recessed housings with

54084,IS,,ISO 6195:2013,Fluid power systems and components — Cylinder-rod wiper-ring housings in reciprocating applications — Dimensions and tolerances,Transmissions hydrauliques et pneumatiques — Logements de joints racleurs pour tiges de piston à mouvement linéaire de vérins — Dimensions et tolérances,2013-02-21,3,['23.100.20'],ISO/TC 131/SC 7,9599,[30056],[77395],"['en','fr']",16,"<p>ISO 6195:2013 specifies dimensions and tolerances of housings for wiper rings used in reciprocating rod applications for fluid power cylinders. The range of rod diameters is from 4 mm to 360 mm.</p><p>ISO 6195:2013 is applicable to the following five housing designs.</p><ul><li>Type A: recessed housings with

12459,IS,,ISO 6196-1:1980,Micrographics — Vocabulary — Section 01 : General terms,Micrographie — Vocabulaire — Chapitre 01 : Termes généraux,1980-05-01,1,"['01.040.37','37.080']",ISO/TC 171,9599,,[12460],"['en','fr']",12,

12461,IS,,ISO 6196-2:1982,Micrographics — Vocabulary — Section 02 : Image positions and methods of recording,Micrographie — Vocabulaire — Chapitre 02 : Disposition des images et méthodes de prise de vue,1982-07-01,1,"['01.040.37','37.080']",ISO/TC 171,9599,,[12462],"['en','fr']",10,

12463,IS,,ISO 6196-3:1983,Micrographics — Vocabulary — Part 3: Film processing,Micrographie — Vocabulaire — Partie 3: Traitement photographique,1983-10-01,1,"['01.040.37','37.080']",ISO/TC 171,9599,,[2047],"['en','fr']",12,

12464,IS,,ISO 6196-4:1987,Micrographics — Vocabulary — Part 4: Materials and packaging,Micrographie — Vocabulaire — Partie 4: Supports et conditionnement,1987-02-05,1,"['01.040.37','37.080']",ISO/TC 171,9599,,[22166],"['en','fr','ru']",24,

12471,IS,,ISO 6199:1991,Micrographics — Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm — Operating procedures,Micrographie — Micrographie des documents sur films argentiques de 16 mm et 35 mm — Techniques opératoires,1991-07-25,1,['37.080'],ISO/TC 171/SC 2,9599,,[27582],"['en','fr']",17,"<p>Establishes general principles for document filming, including orientation of images on film, area for codes, and the information required to facilitate identification, classification, testing and subsequent use of the microfilm. Annexes A, B, C and D are for information only.</p>"

3700,IS,,ISO 62:1980,Plastics — Determination of water absorption,Plastiques — Détermination de l'absorption d'eau,1980-09-01,1,['83.080.01'],ISO/TC 61/SC 6,9599,[3919],[25542],"['en','fr']",4,

25542,IS,,ISO 62:1999,Plastics — Determination of water absorption,Plastiques — Détermination de l'absorption d'eau,1999-02-04,2,['83.080.01'],ISO/TC 61/SC 6,9599,[3700],"[38239,41672]","['en','fr']",11,

12472,IS,,ISO 6200:1979,Micrographics — Density of silver-gelatin type films,Micrographie — Densité des films gélatino-argentiques,1979-09-01,1,['37.080'],ISO/TC 171,9599,,[12473],"['en','fr']",2,

12473,IS,,ISO 6200:1990,Micrographics — First generation silver-gelatin microforms of source documents — Density specifications,Micrographie — Microformes documentaires gélatino-argentiques de première génération — Spécifications des densités,1990-11-29,2,['37.080'],ISO/TC 171/SC 1,9599,[12472],[28103],"['en','fr']",3,

12476,IS,,ISO 6207:1992,Seamless nickel and nickel alloy tube,Tubes sans soudure en nickel et alliages de nickel,1992-07-09,1,['23.040.15'],ISO/TC 155,9599,,[29809],"['en','fr']",14,"<p>Specifies requirements (composition, mechanical properties, dimensional tolerances, limiting bend radii) and test procedures for the following materials in the following size ranges: tube for general purpose: cold worked - outside diameter 4 mm to 240 mm, hot worked - outside diameter 38 mm to 240 mm; tube for condenser and heat-exchanger applications: cold worked - maximum outside diameter 80 mm with wall thickness up to and including 5 mm. Annex A lists ISO methods of analysis.</p>"

12477,IS,,ISO 6208:1992,"Nickel and nickel alloy plate, sheet and strip","Plaques, tôles et bandes en nickel et alliages de nickel",1992-07-09,1,['77.150.40'],ISO/TC 155,9599,,[29810],"['en','fr']",19,"<p>Specifies requirements (composition, mechanical properties, dimensional tolerances) and test procedures for hot-rolled or cold-rolled materials for general applications in the following size ranges: plate over 4 mm up to and including 100 mm, sheet up to and including 4 mm, strip up to and including 4 mm. Annex A lists ISO methods of analysis.</p>"

12478,IS,,ISO 6209:1983,Rubber compounding ingredients — Carbon black — Determination of solvent extractable material,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination des matières extractibles par les solvants,1983-09-01,2,['83.040.20'],ISO/TC 45,9599,,[12479],"['en','fr']",3,

12479,IS,,ISO 6209:1988,Rubber compounding ingredients — Carbon black — Determination of solvent extractable material,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination des matières extractibles par les solvants,1988-04-14,3,['83.040.20'],ISO/TC 45/SC 3,9599,[12478],[45776],"['en','fr']",3,<p>Lays down two methods for quantitative determination. Applicable to all types of carbon black. Extraction of test portions with solvent for 16 hours. Elimination of the solvent by evaporation and weighing the of the extract obtained. 2 figures show the test apparatus. - °Constitutes a minor revision of the second edition (ISO 6209:1983).</p>

12486,IS,,ISO 6213:1983,Welding — Items to be considered to ensure quality in welded structures,Soudage — Points à considérer pour s'assurer de la qualité des constructions soudées,1983-11-01,1,['25.160.10'],ISO/TC 44/SC 10,9599,,[12487],"['en','fr']",3,

12487,IS,,ISO 6213:1989,Welding — Factors to be considered to ensure quality in welded structures,Soudage — Facteurs à considérer pour s'assurer de la qualité des constructions soudées,1989-04-20,2,['25.160.10'],ISO/TC 44/SC 10,9599,[12486],"[9392,21155,21156,21157]","['en','fr']",4,

12493,IS,,ISO 6218:1981,Shipbuilding — Inland navigation — Coupling winches for push tows — Main dimensions,Construction navale — Navigation intérieure — Treuils d'accouplement pour les convois poussés — Dimensions principales,1981-03-01,1,['47.060'],ISO/TC 8/SC 7,9599,,[36228],"['en','fr']",4,<p>Specifies the dimensions and requirements necessary to allow the interchangeability. Does not specify the types of vessels on which the coupling winches may be installed; the decision being left to the shipowner.</p>

36228,IS,,ISO 6218:2005,Inland navigation vessels — Manually operated coupling devices for push tows — Safety requirements and main dimensions,Bateaux de navigation intérieure — Treuils d'accouplement manoeuvrés à la main pour les convois poussés — Prescriptions de sécurité et dimensions principales,2005-04-20,2,['47.060'],ISO/TC 8/SC 7,9599,[12493],[64592],['en'],8,<p>ISO 6218:2005 specifies dimensions and safety requirements for manually operated coupling devices (securing devices) used for assembling inland navigation vessels as a push tow or vessels coupled alongside by means of wire rope connections. It also gives rules for designation and testing.</p>

64592,IS,,ISO 6218:2015,Inland navigation vessels — Manually- and power-operated coupling devices for pushing units and coupled vessels — Safety requirements and main dimensions,Bateaux de navigation intérieure — Treuils d'accouplement manoeuvrés à la main ou motorisés pour les convois poussés et les formations à couple — Exigences de sécurité et dimensions principales,2015-09-18,3,['47.060'],ISO/TC 8/SC 7,9599,[36228],[75717],"['en','fr']",16,"<p>ISO 6218:2015 specifies dimensions and safety requirements for manually operated and power-driven coupling devices used for assembling inland navigation vessels as a push tow or vessels coupled alongside by means of wire rope connections. The coupl

4742,IS,,ISO 622:1981,Solid mineral fuels — Determination of phorphorus content — Reduced molybdophosphate photometric method,Combustibles minéraux solides — Dosage du phosphore — Méthode photométrique au molybdophosphate réduit,1981-08-01,1,['75.160.10'],ISO/TC 27/SC 5,9599,[5342],[70208],"['en','fr']",4,<p>For taking the phosphorus into solution the following two methods are specified: The carbonaceous material is removed by ashing in amuffle furnace under specified conditions and the phosphorus is extracted by treatment with hydrofluoric and sulphuric acids. The carbonaceous material is removed by repeated oxidation with nitric acid in the presence of sulphuric acid. The determination is

70208,IS,,ISO 622:2016,Solid mineral fuels — Determination of phosphorus content — Reduced molybdophosphate photometric method,Combustibles minéraux solides — Dosage du phosphore — Méthode photométrique au molybdophosphate réduit,2016-11-18,2,['75.160.10'],ISO/TC 27/SC 5,9599,[4742],[86989],['en'],6,"<p>ISO 622:2016 specifies a reduced molybdophosphate photometric method for the determination of the total phosphorus content of hard coal, lignites and coke. Two methods for taking the phosphorus into solution are specified, namely extraction from the coal or coke ash with acid or by repeated oxidation of the coal or coke, by acid, to remove carbonaceous matter.</p>"

12496,IS,,ISO 6221:1980,Photography — Photographic films and papers — Determination of the dimensional change characteristics,Photographie — Papiers et films photographiques — Méthode de détermination des caractéristiques de variation dimensionnelle,1980-06-01,1,['37.040.20'],ISO/TC 42,9599,,[12497],"['en','fr']",11,

12497,IS,,ISO 6221:1991,Photography — Films and papers — Determination of dimensional change,Photographie — Films et papiers — Détermination des variations dimensionnelles,1991-06-20,2,['37.040.20'],ISO/TC 42,9599,[12496],[25904],"['en','fr']",12,

25904,IS,,ISO 6221:1996,Photography — Films and papers — Determination of dimensional change,Photographie — Films et papiers — Détermination des variations dimensionnelles,1996-12-26,3,['37.040.20'],ISO/TC 42,9599,[12497],[31927],"['en','fr']",14,"<p>Gives a method for determining the dimensional change of photographic films and papers caused by variations in equilibrium moisture content due to change in the relative humidity of the atmosphere, change in temperature (thermal coefficient of expansion), processing and ageing. Replaces the second edition.</p>"

12498,IS,,ISO 6222:1988,Water quality — Enumeration of viable micro-organisms — Colony count by inoculation in or on a nutrient agar culture medium,Qualité de l'eau — Dénombrement des micro-organismes revivifiables — Comptage des colonies par inoculation dans ou sur un milieu de culture nutritif gélosé,1988-11-03,1,['07.100.20'],ISO/TC 147/SC 4,9599,,[28960],"['en','fr']",2,

12499,IS,,ISO 6224:1981,"Plastics hoses, textile-reinforced, for water — Specification",Tuyaux thermoplastiques à armature textile pour l'eau — Spécifications,1981-05-01,1,['23.040.70'],ISO/TC 45/SC 1,9599,,[12500],"['en','fr']",2,

12500,IS,,ISO 6224:1995,"Plastics hoses, textile-reinforced, for general-purpose water applications — Specification",Tuyaux en plastique à armature textile d'usage général pour l'eau — Spécifications,1995-08-03,2,['23.040.70'],ISO/TC 45/SC 1,9599,[12499],[37223],"['en','fr']",4,"<p>Specifies requirements for three types of non-collapsible, textile-reinforced thermoplastic water hose. Hoses shall not be used for conveyance of drinking water, for washing-machine inlets, as fire-fighting hose, for special agricultural machines and gardening hoses. Cancels and replaces the first edition, which has been technically revised.</p>"

37223,IS,,ISO 6224:2005,"Thermoplastics hoses, textile-reinforced, for general-purpose water applications — Specification",Tuyaux en matières thermoplastiques à armature textile d'usage général pour l'eau — Spécifications,2005-02-25,3,['23.040.70'],ISO/TC 45/SC 1,9599,[12500],[53015],"['en','fr']",5,"<p>ISO 6224:2005 specifies the requirements for three types of general-purpose textile-reinforced thermoplastic water-discharge hose with an operating temperature range of -10 °C to +60 °C and a maximum working pressure of 25 bar.</p><p>These hoses are not intended to be used for conveyance of potable (drinking) water, for washing-machine inlets, as firefighting hoses, for special agricultural m

53015,IS,,ISO 6224:2011,"Thermoplastics hoses, textile-reinforced, for general-purpose water applications — Specification",Tuyaux en matières thermoplastiques à armature textile d'usage général pour l'eau — Spécifications,2011-09-27,4,['23.040.70'],ISO/TC 45/SC 1,9599,[37223],[84064],"['en','fr','ru']",7,"<p>This International Standard specifies the requirements for general-purpose textile-reinforced thermoplastics</p><p>water-discharge hoses.</p><p>Three types of hose are specified according to their operating duty requirements, i.e. their ambient and water</p><p>temperature ranges:</p><p>— ambient temperatures: −10 °C to +60 °C;</p><p>— water temperature during operation: 0 °C to +60 °C.</

12501,IS,,ISO 6225-1:1984,"Rubber, raw, natural — Determination of castor oil content — Part 1: Determination of castor oil glycerides content — Thin layer chromatographic method",Caoutchouc naturel brut — Détermination de la teneur en huile de ricin — Partie 1: Détermination de la teneur en glycérides d'huile de ricin — Méthode par chromatographie en couche mince,1984-04-01,1,['83.040.10'],ISO/TC 45/SC 2,9599,,[43685],"['en','fr']",3,<p>The addition of the mentioned ingredient is intended to facilitate crumbing. This part of standard aids the estimation of the amount of oil remaining in the rubber. Triglyceride of ricinoleic acid is the principal constituent of castor oil (80...85 %). Metho

12502,IS,,ISO 6225-2:1983,"Rubber, raw, natural — Determination of castor oil content — Part 2: Determination of total ricinoleic acid content — Gas chromatographic method",Caoutchouc naturel brut — Détermination de la teneur en huile de ricin — Partie 2: Détermination de la teneur en acide ricinoléique total — Méthode par chromatographie en phase gazeuse,1983-12-01,1,['83.040.10'],ISO/TC 45,9599,,[12503],"['en','fr']",3,

12510,IS,,ISO 6235:1982,"Rubber, raw — Determination of block polystyrene content — Ozonolysis method",Caoutchouc brut — Détermination de la teneur en polystyrène séquencé — Méthode de l'ozonolyse,1982-02-01,1,['83.040.10'],ISO/TC 45,9599,,[24252],"['en','fr']",3,

24252,IS,,ISO 6235:1995,"Rubber, raw — Determination of block polystyrene content — Ozonolysis method",Caoutchouc brut — Dosage du polystyrène séquencé — Méthode de l'ozonolyse,1995-04-06,2,['83.040.10'],ISO/TC 45/SC 3,9599,[12510],[70305],"['en','fr']",3,"<p>Cancels and replaces the first edition (1982). Specifies a method for the determination of the long polystyrene block content of raw uncompounded styrene-butadiene rubber (SBR) and raw uncompounded blends of block SBR. Not applicable to blends of block SBR with EPDM, IIR, CSM and other halogenated rubbers. The method is suitable for rubbers having block polystyrene contents in the range from 5 % (m/m) to 100 % (m/m).</p>"

12512,IS,,ISO 6237:1987,Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by tensile loading,Adhésifs — Joints collés de bois à bois — Détermination de la résistance au cisaillement par effort de traction,1987-03-19,1,['83.180'],ISO/TC 61/SC 11,9599,,[38246],"['en','fr']",8,<p>The method is intended for testing adhesives used in bonding wood to wood. Standard specimens are prepared from timber plies. The test specimens shall be of a two-ply or three-ply construction with notches as shown in a picture. The shear area is 20 mm x 25 mm. The adhesive shall be applied in accordance with the procedure recommended by the manufacturer of the adhesive. The mean tensile shear s

38246,IS,,ISO 6237:2003,Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by tensile loading,Adhésifs — Joints collés de bois à bois — Détermination de la résistance au cisaillement par effort de traction,2003-10-21,2,['83.180'],ISO/TC 61/SC 11,9599,[12512],"[65222,72817]","['en','fr']",9,"<p>ISO 6237:2003 specifies a method for determining the shear strength of wood-to-wood adhesive bonds, with a standard specimen loaded in tension and under specified conditions of preparation, conditioning and testing. This method is intended for testing only those adhesives used in bonding wood to wood in either parallel-laminated or cross-laminated construction. It is not intended

12513,IS,,ISO 6238:1987,Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by compression loading,Adhésifs — Joints collés de bois à bois — Détermination de la résistance au cisaillement par effort de compression,1987-03-12,1,['83.180'],ISO/TC 61/SC 11,9599,,[29784],"['en','fr']",8,

29784,IS,,ISO 6238:2001,Adhesives — Wood-to-wood adhesive bonds — Determination of shear strength by compressive loading,Adhésifs — Joints collés de bois à bois — Détermination de la résistance au cisaillement par effort de compression,2001-02-15,2,['83.180'],ISO/TC 61/SC 11,9599,[12513],[72967],"['en','fr']",9,

12514,IS,,ISO 6239:1986,Plastics — Determination of tensile properties by use of small specimens,Plastiques — Détermination des caractéristiques en traction sur petites éprouvettes,1986-11-13,1,['83.080'],ISO/TC 61/SC 2,9599,,[4593],"['en','fr']",4,

4744,IS,,ISO 624:1974,Pulps — Determination of dichloromethane soluble matter,Pâtes — Détermination des matières solubles dans le dichlorométhane,1974-09-01,1,['85.040'],ISO/TC 6,9599,,[24336],"['en','fr']",2,

12516,IS,,ISO 6240:1980,Performance standards in building — Contents and presentation,Normes de performance dans le bâtiment — Contenu et présentation,1980-07-01,1,['91.040.01'],ISO/TC 59,9599,,"[63999,52305]","['en','fr']",2,"<p>Specifies the basic contents to be included in performance standards for building components and assemblies, and indicates a standard order for their inclusion. Is intended primarily for use by standards committees preparing performance standards for building components and assemblies. Should also be useful for the preparation of other types of documents.</p>"

12517,IS,,ISO 6241:1984,Performance standards in building — Principles for their preparation and factors to be considered,Normes de performance dans le bâtiment — Principes d'établissement et facteurs à considérer,1984-04-01,1,['91.040.01'],ISO/TC 59,9599,,"[63999,52306]","['en','fr']",10,"<p>Lays down general principles for the preparation of performance standards in building. Complements ISO 6240 by listing factors to be considered for performance standards. Is intended to assist standards committees concerned with the performance of whole buildings, of parts of buildings (components, assemblies and sub-systems) and of the spaces within and around buildings.</p>"

12525,IS,,ISO 6245:1982,Petroleum products — Determination of ash,Produits pétroliers — Détermination des cendres,1982-11-01,1,['75.080'],ISO/TC 28,9599,,[12526],"['en','fr']",2,

12526,IS,,ISO 6245:1993,Petroleum products — Determination of ash,Produits pétroliers — Détermination des cendres,1993-06-24,2,['75.080'],ISO/TC 28,9599,[12525],[31156],"['en','fr']",3,"<p>Includes a method for the determination in the range 0,001 to 0,180 % (m/m) from distillate and residual fuel oils, crude oils, lubricating oils, waxes and other petroleum products, in which any ash-forming materials present are normally considered to be undesirable impurities or contaminants. The method is limited to products which are free from added ash-forming additives, including certain phosphorus compounds.</p>"

12527,IS,,ISO 6246:1981,Petroleum products — Motor gasoline and aviation fuels — Determination of existent gum — Jet evaporation method,Produits pétroliers — Essence automobile et essence aviation — Détermination des gommes actuelles — Méthode d'évaporation au jet,1981-11-01,1,['75.160.20'],ISO/TC 28,9599,,[22416],"['en','fr']",8,

22416,IS,,ISO 6246:1995,Petroleum products — Gum content of light and middle distillate fuels — Jet evaporation method,Produits pétroliers — Teneur en gommes des distillats légers et moyens — Méthode d'évaporation au jet,1995-08-17,2,['75.160.20'],ISO/TC 28,9599,[12527],"[45928,64844]","['en','fr']",9,"<p>Method for the determination of the gum content (residue on evaporation) of aviation fuels and motor gasolines or other volatile distillates in their finished form. For motor gasolines a procedure for the determination of the heptane-insoluble portion of the residue is also described. Cancels and replaces the first edition, which has been technically revised.</p>"

30997,IS,Cor,ISO 6246:1995/Cor 1:1998,Petroleum products — Gum content of light and middle distillate fuels — Jet evaporation method — Technical Corrigendum 1,Produits pétroliers — Teneur en gommes des distillats légers et moyens — Méthode d'évaporation au jet — Rectificatif technique 1,1998-11-12,2,['75.160.20'],ISO/TC 28,9599,,"[45928,64844]","['en','fr']",1,

12530,IS,,ISO 6249:1984,Petroleum products — Gas turbine fuels — Determination of thermal oxidation stability — JFTOT method,Produits pétroliers — Carburéacteurs — Détermination de la stabilité à l'oxydation thermique — Méthode JFTOT Produits pétroliers — Carburéacteurs — Détermination de la stabilité à l'oxydation thermique — Méthode JFTOT,1984-08-01,1,['75.160.20'],ISO/TC 28,9599,,[27592],"['en','fr']",23,

27592,IS,,ISO 6249:1999,Petroleum products — Determination of thermal oxidation stability of gas turbine fuels — JFTOT method,Produits pétroliers — Détermination de la stabilité à l'oxydation thermique des carburéacteurs — Méthode JFTOT,1999-10-07,2,['75.160.20'],ISO/TC 28,9599,[12530],[75632],"['en','fr']",20,

4745,IS,,ISO 625:1975,Coal and coke — Determination of carbon and hydrogen — Liebig method,Charbon et coke — Dosage du carbone et de l'hydrogène — Méthode de Liebig,1975-01-01,1,"['73.040','75.160.10']",ISO/TC 27/SC 5,9599,,[4746],"['en','fr']",7,

4746,IS,,ISO 625:1996,Solid mineral fuels — Determination of carbon and hydrogen — Liebig method,Combustibles minéraux solides — Dosage du carbone et de l'hydrogène — Méthode de Liebig,1996-02-15,2,"['73.040','75.160.10']",ISO/TC 27/SC 5,9599,[4745],[86981],['en'],11,"<p>Specifies a method of the determination of the total carbon and the total hydrogen of hard coal, brown coal, lignite and coke by the Liebig method.</p>"

27352,IS,Cor,ISO 625:1996/Cor 1:1996,Solid mineral fuels — Determination of carbon and hydrogen — Liebig method — Technical Corrigendum 1,Combustibles minéraux solides — Dosage du carbone et de l'hydrogène — Méthode de Liebig — Rectificatif technique 1,1996-07-11,2,"['73.040','75.160.10']",ISO/TC 27/SC 5,9599,,[86981],['en'],1,

12531,IS,,ISO 6250:1982,Aviation fuels — Determination of water reaction,Carburants aviation — Détermination de la réaction à l'eau,1982-03-01,1,['75.160.20'],ISO/TC 28,9599,,[26663],"['en','fr']",2,

12532,IS,,ISO 6251:1982,Liquefied petroleum gases — Corrosiveness to copper — Copper strip test,Gaz de pétrole liquéfiés — Action corrosive sur le cuivre — Essai à la lame de cuivre,1982-08-01,1,['75.160.30'],ISO/TC 28,9599,,[24657],"['en','fr']",4,

12533,IS,,ISO 6252:1981,Plastics — Determination of environmental stress cracking (ESC) — Constant tensile stress method,Plastiques — Détermination de la fissuration sous contrainte dans un environnement donné (ESC) — Méthode sous contrainte de traction constante,1981-12-01,1,['83.080.01'],ISO/TC 61,9599,,[12534],"['en','fr']",8,

12534,IS,,ISO 6252:1992,Plastics — Determination of environmental stress cracking (ESC) — Constant-tensile-stress method,Plastiques — Détermination de la fissuration sous contrainte dans un environnement donné (ESC) — Méthode sous contrainte de traction constante,1992-08-12,2,['83.080.01'],ISO/TC 61/SC 6,9599,[12533],[34862],"['en','fr']",8,"<p>The test is applicable to test specimens, prepared by moulding and/or machining, and can be used for the assessment of both environmental stress cracking of a plastic product or material exposed to different environments, and for the determination of ESC of different plastics materials exposed to a specific environment. Methods for ESC determination b

12535,IS,,ISO 6255:1987,Road vehicles — Rear-window washing and wiping systems for passenger cars — Test methods,Véhicules routiers — Dispositifs de lave-glace et d'essuie-glace pour lunette arrière de voitures particulières — Méthodes d'essai,1987-10-08,1,['43.040.60'],ISO/TC 22,9599,,[21536],"['en','fr']",7,

12536,IS,,ISO 6256:1981,Data communication — HDLC balanced class of procedures,Téléinformatique — Classe de procédure équilibrée HDLC,1981-06-01,1,['35.100.20'],ISO/IEC JTC 1/SC 6,9599,,[14707],"['en','fr']",7,

12537,IS,,ISO 6257:1980,Carbonaceous materials used in the production of aluminium — Pitch for electrodes — Sampling,Produits carbonés utilisés pour la production de l'aluminium — Brais pour électrodes — Échantillonnage,1980-11-01,1,['71.100.10'],ISO/TC 226,9599,,[35692],"['en','fr']",15,"<p>Specifies methods for sampling and preparing samples prior to testing of binder pitch used in the manufacture of electrodes for the electrolytic production of aluminium. These methods are applicable to grades of pitch in liquid or solid form, the latter having softening points higher than 30 °C in bulk or in a number of containers making up one batch at sites of manufacture, storage or delivery.</p>" 125

12539,IS,,ISO 6259-1:1997,Thermoplastics pipes — Determination of tensile properties — Part 1: General test method,Tubes en matières thermoplastiques — Détermination des caractéristiques en traction — Partie 1: Méthode générale d'essai,1997-12-18,1,['23.040.20'],ISO/TC 138/SC 5,9599,,[62422],"['en','fr']",7,

22374,IS,,ISO 6259-2:1997,"Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI)","Tubes en matières thermoplastiques — Détermination des caractéristiques en traction — Partie 2: Poly(chlorure de vinyle) non plastifié (PVC-U), poly(chlorure de vinyle) chloré (PVC-C) et poly(chlorure de vinyle) à résistance au choc améliorée (PVC-choc)",1997-12-18,1,['23.040.20'],ISO/TC 138/SC 5,9599,,[73774],"['en','fr']",8,

22375,IS,,ISO 6259-3:1997,Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes,Tubes en matières thermoplastiques — Détermination des caractéristiques en traction — Partie 3: Tubes en polyoléfines,1997-12-18,1,['23.040.20'],ISO/TC 138/SC 5,9599,,[62421],"['en','fr']",10,

12540,IS,,ISO 6260:1984,Mail payment orders,Ordre de paiement par voie postale,1984-09-01,1,['03.060'],ISO/TC 68,9599,,[25221],"['en','fr']",5,<p>Used between banks and compatible with S.W.I.F.T.. Definition of data elements and specification of a layout key for the form to be used. Specimen form 1 gives the exact layout according to ISO 3535 ans form 2 provides an example.</p>

12541,IS,,ISO 6261:1984,Boring bars (tool holders with cylindrical shank) for indexable inserts — Designation,Porte-plaquette d'alésage (porte-plaquette à queue de section ronde) — Désignation,1984-02-01,1,['25.100.10'],ISO/TC 29/SC 9,9599,,[21906],"['en','fr']",6,

21906,IS,,ISO 6261:1995,Boring bars (tool holders with cylindrical shank) for indexable inserts — Designation,Porte-plaquette d'alésage (porte-plaquette à queue de section ronde) — Désignation,1995-06-22,2,['25.100.10'],ISO/TC 29/SC 9,9599,[12541],[52308],"['en','fr']",6,<p>Cancels and replaces the first edition (1984). Establishes a code for the designation of boring bars (tool holders with cylindrical shank) with standardized dimension f for indexable inserts so that orders and specifications for such tools can be simplified.</p>

52308,IS,,ISO 6261:2011,Tool holders with cylindrical shank (boring bars) for indexable inserts — Designation,Porte-plaquette à queue cylindrique (porte-plaquette d'alésage) — Désignation,2011-08-25,3,['25.100.10'],ISO/TC 29/SC 9,9599,[21906],[60124],"['en','fr']",11,"<p>ISO 6261:2011 defines a code for the designation of tool holders for internal turning (boring bars) operations with cylindrical shank and standardized dimension, <i>f</i>, for indexable inserts in order to simplify orders and specifications for such tools.</p>"

12542,IS,,ISO 6262-1:1982,End mills with indexable inserts — Part 1: End mills with flatted parallel shank,Fraises en bout à plaquettes amovibles — Partie 1: Fraises à queue cylindrique à méplat,1982-04-01,1,['25.100.20'],ISO/TC 29/SC 9,9599,,[62906],"['en','fr']",1,

12543,IS,,ISO 6262-2:1982,End mills with indexable inserts — Part 2: End mills with Morse taper shank,Fraises en bout à plaquettes amovibles — Partie 2: Fraises à queue cône Morse,1982-04-01,1,['25.100.20'],ISO/TC 29/SC 9,9599,,[62907],"['en','fr']",1,

12544,IS,,ISO 6263:1987,Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces,Transmissions hydrauliques — Régulateurs de débit — Plan de pose,1987-12-17,1,['23.100.50'],ISO/TC 131/SC 5,9599,,[21623],['en'],17,

21623,IS,,ISO 6263:1997,Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces,Transmissions hydrauliques — Régulateurs de débit — Plan de pose,1997-04-24,2,['23.100.50'],ISO/TC 131/SC 5,9599,[12544],[53396],"['en','fr']",20,

12545,IS,,ISO 6264:1987,Hydraulic fluid power — Pressure-relief valves — Mounting surfaces,Transmissions hydrauliques — Limiteurs de pression — Plan de pose,1987-11-26,1,['23.100.50'],ISO/TC 131/SC 5,9599,,[20085],"['en','fr']",25,

12546,IS,,ISO 6265:1980,Alpine skis — Determination of deformation load and breaking load,Skis alpins — Détermination de la charge de déformation et de la charge de rupture,1980-03-01,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[12547],"['en','fr']",3,

12547,IS,,ISO 6265:1992,Alpine skis — Determination of deformation load and breaking load,Skis alpins — Détermination de la charge de déformation et de la charge de rupture,1992-07-29,2,['97.220.20'],ISO/TC 83/SC 4,9599,[12546],[60845],"['en','fr']",4,"<p>Specifies a method for determining the resistance of alpine skis to permanent deformation and breaking. Applies to all sizes of alpine skis for adults, juveniles and children.</p>"

12548,IS,,ISO 6266:1980,Alpine skis — Determination of fatigue indexes — Cyclic loading test,Skis alpins — Détermination des indices de fatigue — Essai en flexion alternée,1980-10-01,1,['97.220.20'],ISO/TC 83/SC 4,9599,,"[26551,60846]","['en','fr']",4,<p>Specifies a method for the determination of the resistance of the skis to changes in shape and of stiffness after a bending test with cyclic loading. Is applicable to all adult's skis and junior skis from 1400 to 1700 mm and children's skis from 1000 to 1300 mm. The test method determines the fatigue behaviour of camber height and centre spring constant as two important characteristics.</p>

26619,IS,,ISO 6270-1:1998,Paints and varnishes — Determination of resistance to humidity — Part 1: Continuous condensation,Peintures et vernis — Détermination de la résistance à l'humidité — Partie 1: Condensation continue,1998-04-02,1,['87.040'],ISO/TC 35/SC 9,9599,[12552],[64857],"['en','fr']",5,

12552,IS,,ISO 6270:1980,Paints and varnishes — Determination of resistance to humidity (continuous condensation),Peinture et vernis — Détermination de la résistance à l'humidité (par condensation continue),1980-04-01,1,['87.040'],ISO/TC 35/SC 9,9599,,"[30331,26619]","['en','fr']",3,

32219,IS,,ISO 6270-2:2005,Paints and varnishes — Determination of resistance to humidity — Part 2: Procedure for exposing test specimens in condensation-water atmospheres,Peinture et vernis — Détermination de la résistance à l'humidité — Partie 2: Mode opératoire d'exposition d'éprouvettes dans des atmosphères de condensation d'eau,2005-06-30,1,['87.040'],ISO/TC 35/SC 9,9599,,[64858],"['en','fr','ru']",6,"<p>ISO 6270-2:2005 describes the general conditions and procedures which need to be observed when testing coated test specimens in constant condensation-water atmospheres or in alternating condensation-water atmospheres, in order to ensure that the results of tests carried out in different

64858,IS,,ISO 6270-2:2017,Paints and varnishes — Determination of resistance to humidity — Part 2: Condensation (in-cabinet exposure with heated water reservoir),Peintures et vernis — Détermination de la résistance à l'humidité — Partie 2: Condensation (exposition en enceinte avec réservoir à eau chauffée),2017-11-30,2,['87.040'],ISO/TC 35/SC 9,9599,[32219],[87281],"['en','fr']",8,"<p>ISO 6270-2:2017 specifies the general conditions and procedures which need to be observed when testing coated test specimens in constant condensation-water atmospheres or in alternating condensation-water atmospheres, in order to ensure that the results of tests carried out in different laboratories are reprodu

34150,IS,,ISO 6271-1:2004,Clear liquids — Estimation of colour by the platinum-cobalt scale — Part 1: Visual method,Liquides clairs — Évaluation de la couleur au moyen de l'échelle platine-cobalt — Partie 1: Méthode visuelle,2004-11-23,1,['87.060.20'],ISO/TC 35,9599,[12554],[63300],"['en','fr','ru']",4,"<p>ISO 6271-1:2004 specifies a method for estimating the colour, in Pt-Co units, of clear liquids.</p><p>It is applicable to clear liquids having colour characteristics similar to those of the reference platinum-cobalt scale.</p>"

12553,IS,,ISO 6271:1981,Clear liquids — Estimation of colour by the platinum-cobalt scale,Liquides clairs — Évaluation de la couleur au moyen de l'échelle platine-cobalt,1981-02-01,1,['87.060.99'],ISO/TC 35,9599,,[12554],"['en','fr']",3,

12554,IS,,ISO 6271:1997,Clear liquids — Estimation of colour by the platinum-cobalt scale,Liquides clairs — Évaluation de la couleur au moyen de l'échelle platine-cobalt,1997-07-24,2,['87.060.20'],ISO/TC 35,9599,[12553],[34150],"['en','fr']",5,