Withdrawn and superseded ISO standards — page 131 of 246

60352,IS,,ISO 536:2012,Paper and board — Determination of grammage,Papier et carton — Détermination du grammage,2012-07-09,3,['85.060'],ISO/TC 6/SC 2,9599,[20674],[77583],"['en','fr']",6,<p>ISO 536:2012 specifies a method for determining the grammage of paper and board.</p>

11388,IS,,ISO 5360:1993,Anaesthetic vaporizers — Agent-specific filling systems,Évaporateurs d'anesthésie — Systèmes de remplissage spécifiques à l'agent,1993-02-18,1,['11.040.10'],ISO/TC 121/SC 1,9599,,[44221],"['en','fr']",17,"<p>Specifies the dimensions of details (bottle, bottle collar, bottle adaptor, filler receptacle), but does not specify construction materials. Annex A describes determination of total leakage into atmosphere of anaesthetic agent during filling, annex B types of agent-specific filling systems. Because of the unique properties of desflurane, dimensions for this agent have not been specified.</p>"

31001,IS,Cor,ISO 5360:1993/Cor 1:1998,Anaesthetic vaporizers — Agent-specific filling systems — Technical Corrigendum 1,Évaporateurs d'anesthésie — Systèmes de remplissage spécifiques à l'agent — Rectificatif technique 1,1998-11-26,1,['11.040.10'],ISO/TC 121/SC 1,9599,,[44221],"['en','fr']",1,

44221,IS,,ISO 5360:2006,Anaesthetic vaporizers — Agent-specific filling systems,Évaporateurs d'anesthésie — Systèmes de remplissage spécifiques à l'agent,2006-10-11,2,['11.040.10'],ISO/TC 121/SC 1,9599,"[31001,41313,11388]","[54850,57744]","['en','fr','ru']",21,"<p>ISO 5360:2006 specifies the dimensions of agent-specific filling systems for agent-specific anaesthetic vaporizers.</p><p>This International Standard does not specify construction materials.</p><p>Because of the unique properties of desflurane, dimensions for this agent have not been specified in ISO 5360:2006.</p>"

57744,IS,,ISO 5360:2012,Anaesthetic vaporizers — Agent-specific filling systems,Évaporateurs d'anesthésie — Systèmes de remplissage spécifiques à l'agent,2012-01-10,3,['11.040.10'],ISO/TC 121/SC 1,9599,[44221],[68417],"['en','fr']",21,"<p>ISO 5360:2012 specifies requirements, including dimensions, for agent-specific filling systems for agent-specific anaesthetic vaporizers.</p><p>ISO 5360:2012 does not specify construction materials. Because of the unique properties of desflurane, dimensions for this agent have not been specified in ISO 5360:2012.</p>"

11391,IS,,ISO 5361-1:1984,Tracheal tubes — Part 1: General requirements,Tubes trachéaux — Partie 1: Spécifications générales,1984-08-01,1,['11.040.10'],ISO/TC 121/SC 2,9599,,[11392],"['en','fr']",3,

11392,IS,,ISO 5361-1:1988,Tracheal tubes — Part 1: General requirements,Tubes trachéaux — Partie 1: Spécifications générales,1988-05-26,2,['11.040.10'],ISO/TC 121/SC 2,9599,[11391],[24590],"['en','fr']",3,

24590,IS,,ISO 5361:1999,Anaesthetic and respiratory equipment — Tracheal tubes and connectors,Matériel d'anesthésie et de réanimation respiratoire — Sondes trachéales et raccords,1999-09-30,1,['11.040.10'],ISO/TC 121/SC 2,9599,"[11394,11398,11395,11392,13867]",[54561],['en'],23,

11393,IS,,ISO 5361-2:1984,Tracheal tubes — Part 2: Oro-tracheal and naso-tracheal tubes of the Magill type (plain and cuffed),Tubes trachéaux — Partie 2: Tubes orotrachéaux et nasotrachéaux (avec et sans ballonnets) type Magill,1984-08-01,1,['11.040.10'],ISO/TC 121/SC 2,9599,,[11394],"['en','fr']",7,

11394,IS,,ISO 5361-2:1993,Tracheal tubes — Part 2: Oro-tracheal and naso-tracheal tubes of Magill type (plain and cuffed),Tubes trachéaux — Partie 2: Tubes orotrachéaux et nasotrachéaux (avec et sans ballonnets) de type Magill,1993-06-17,2,['11.040.10'],ISO/TC 121/SC 2,9599,[11393],[24590],"['en','fr']",8,

54561,IS,,ISO 5361:2012,Anaesthetic and respiratory equipment — Tracheal tubes and connectors,Matériel d'anesthésie et de réanimation respiratoire — Sondes trachéales et raccords,2012-09-20,2,['11.040.10'],ISO/TC 121/SC 2,9599,"[24590,11397]",[63295],"['en','fr']",45,

63295,IS,,ISO 5361:2016,Anaesthetic and respiratory equipment — Tracheal tubes and connectors,Matériel d'anesthésie et de réanimation respiratoire — Sondes trachéales et raccords,2016-08-26,3,['11.040.10'],ISO/TC 121/SC 2,9599,[54561],[77497],"['en','fr']",41,"<p>ISO 5361:2016 provides essential performance and safety requirements for <b>oro-tracheal and naso-tracheal tubes</b> and <b>tracheal tube connectors. Tracheal tubes</b> with walls reinforced with metal or nylon, <b>tracheal tubes</b> with <b>shoulders</b>, tapered <b>tracheal tubes</b>, <b>tracheal tubes</b> with means for suctioning, monitoring or delivery of drugs or other gases, and the many other types of <b>tracheal tubes</b> d

11395,IS,,ISO 5361-3:1984,Tracheal tubes — Part 3: Murphy type,Tubes trachéaux — Partie 3: Type Murphy,1984-08-01,1,['11.040.10'],ISO/TC 121/SC 2,9599,,[24590],"['en','fr']",2,

11396,IS,,ISO 5361-4:1984,Tracheal tubes — Part 4: Cole type,Tubes trachéaux — Partie 4: Type Cole,1984-08-01,1,['11.040.10'],ISO/TC 121/SC 2,9599,,[11397],"['en','fr']",3,

11397,IS,,ISO 5361-4:1987,Tracheal tubes — Part 4: Cole type,Tubes trachéaux — Partie 4: Type Cole,1987-11-19,2,['11.040.10'],ISO/TC 121/SC 2,9599,[11396],[54561],"['en','fr']",3,<p>This standard deals with accessories of anaesthetic equipment and medical breathing machines. It specifies the requirements for tracheal tubes of the Cole type for the use in infants. The basic dimensions of these tracheal tubes are listed in a table and illustrated.</p>

11398,IS,,ISO 5361-5:1984,Tracheal tubes — Part 5: Requirements and methods of test for cuffs and tubes,Tubes trachéaux — Partie 5: Spécifications et méthodes d'essai pour les ballonnets et les tubes,1984-08-01,1,['11.040.10'],ISO/TC 121/SC 2,9599,,[24590],"['en','fr']",4,

11400,IS,,ISO 5362:1980,Anaesthetic reservoir bags,Ballons réservoirs d'anesthésie,1980-11-01,1,['11.040.10'],ISO/TC 121,9599,,[11401],"['en','fr']",2,

11401,IS,,ISO 5362:1986,Anaesthetic reservoir bags,Ballons réservoirs d'anesthésie,1986-09-18,2,['11.040.10'],ISO/TC 121/SC 2,9599,[11400],[28345],"['en','fr']",3,

28345,IS,,ISO 5362:2000,Anaesthetic reservoir bags,Ballons réservoirs d'anesthésie,2000-12-21,3,['11.040.10'],ISO/TC 121/SC 2,9599,[11401],[43011],"['en','fr']",12,

43011,IS,,ISO 5362:2006,Anaesthetic reservoir bags,Ballons réservoirs d'anesthésie,2006-05-22,4,['11.040.10'],ISO/TC 121/SC 2,9599,[28345],[84225],"['en','fr','ru']",13,"<p>ISO 5362:2006 specifies requirements for antistatic and non-antistatic reservoir bags for use with anaesthetic apparatus or lung-ventilator breathing systems. It includes requirements for the design of the neck, size designation, distension and, where relevant, for electrical resistance.</p><p>ISO 5362:2006 includes requirements for both single-use and reusable bags. Reusable bags are intended to comply with the requirements of ISO 5362:2006 for the recommended product life.</p><p>ISO 5362:2006 is not applicable to specia

11402,IS,,ISO 5364:1980,Oropharyngeal airways,Canules oro-pharyngées,1980-11-01,1,['11.040.10'],ISO/TC 121,9599,,[11403],['en'],3,

11403,IS,,ISO 5364:1986,Oropharyngeal airways,Canules oro-pharyngées,1986-07-10,2,['11.040.10'],ISO/TC 121/SC 2,9599,[11402],[31208],"['en','fr']",3,<p>Specification of size designation and certain basic requirements of oropharyngeal airways. Because of the wide variations in size and anatomical configuration of the human oropharynx a large range of nominal size values is given. The form and marking positions are shown in figures.</p>

21563,IS,Cor,ISO 5364:1986/Cor 1:1992,Oropharyngeal airways — Technical Corrigendum 1,Canules oro-pharyngées — Rectificatif technique 1,1992-12-17,2,['11.040.10'],ISO/TC 121/SC 2,9599,,[31208],"['en','fr']",1,<p>Corrects an ambiguity in ISO 5364-1986.</p>

31208,IS,,ISO 5364:2001,Anaesthetic and respiratory equipment — Oropharyngeal airways,Matériel d'anesthésie et de réanimation respiratoire — Canules oropharyngées,2001-09-20,3,['11.040.10'],ISO/TC 121/SC 2,9599,"[11403,21563]","[50928,42988]",['en'],11,

50928,IS,,ISO 5364:2008,Anaesthetic and respiratory equipment — Oropharyngeal airways,Matériel d'anesthésie et de réanimation respiratoire — Canules oropharyngées,2008-07-02,4,['11.040.10'],ISO/TC 121/SC 2,9599,[31208],[63296],"['en','fr','ru']",11,"<p>ISO 5364:2008 specifies requirements for oropharyngeal airways of plastics materials and/or rubber, including those with a reinforcement insert made of plastics materials and/or metal. Flammability of oropharyngeal airways, for example if flammable anaesthetics, electrosurgical units or lasers are used, is a well-recognized hazard. It is addressed by appropriate clinical management, which is outside the scope of this International Standard.</p

63296,IS,,ISO 5364:2016,Anaesthetic and respiratory equipment — Oropharyngeal airways,Matériel d'anesthésie et de réanimation respiratoire — Canules oropharyngées,2016-08-26,5,['11.040.10'],ISO/TC 121/SC 2,9599,[50928],[89732],"['en','fr']",14,"<p>ISO 5364:2016 specifies requirements for oropharyngeal airways of plastics materials and/or rubber, including those with a reinforcement insert made of plastics materials and/or metal.</p><p>ISO 5364:2016 is not applicable to metal oropharyngeal airways, nor to requirements concerning flammability of oropharyngeal airways.</p><p>Flammability of oropharyngeal airways, for example, if flammable anaesthetics, electrosurgical units, or lasers are used,

11405,IS,,ISO 5366-1:1980,Tracheostomy tubes — Part 1: Connectors,Tubes de trachéostomie — Partie 1: Raccords,1980-12-01,1,['11.040.10'],ISO/TC 121/SC 2,9599,,"[11406,11407]",['en'],2,

11406,IS,,ISO 5366-1:1986,Tracheostomy tubes — Part 1: Connectors,Tubes de trachéostomie — Partie 1: Raccords,1986-07-10,2,['11.040.10'],ISO/TC 121/SC 2,9599,[11405],[11407],"['en','fr']",2,

11407,IS,,ISO 5366-1:1994,Tracheostomy tubes — Part 1: Connectors for tubes for adults,Tubes de trachéostomie — Partie 1: Raccords pour tubes pour adultes,1994-02-03,3,['11.040.10'],ISO/TC 121/SC 2,9599,"[11406,11405]",[31207],"['en','fr']",2,

31207,IS,,ISO 5366-1:2000,Anaesthetic and respiratory equipment — Tracheostomy tubes — Part 1: Tubes and connectors for use in adults,Matériel d'anesthésie et de réanimation respiratoire — Tubes de trachéostomie — Partie 1: Tubes et raccords pour adultes,2000-12-21,4,['11.040.10'],ISO/TC 121/SC 2,9599,"[11409,11407]",[59781],"['en','fr']",13,

11408,IS,,ISO 5366-2:1985,Tracheostomy tubes — Part 2: Basic requirements,Tubes de trachéostomie — Partie 2: Spécifications de base,1985-02-28,1,['11.040.10'],ISO/TC 121/SC 2,9599,,[11409],"['en','fr']",7,

11409,IS,,ISO 5366-2:1993,Tracheostomy tubes — Part 2: Basic requirements for tubes for adults,Tubes de trachéostomie — Partie 2: Prescriptions de base relatives aux tubes pour adultes,1993-07-08,2,['11.040.10'],ISO/TC 121/SC 2,9599,[11408],[31207],"['en','fr']",10,

11410,IS,,ISO 5366-3:1994,Tracheostomy tubes — Part 3: Paediatric tracheostomy tubes,Tubes de trachéostomie — Partie 3: Tubes de trachéostomie pédiatriques,1994-02-03,1,['11.040.10'],ISO/TC 121/SC 2,9599,,[33151],"['en','fr']",8,"<p>Specifies requirements (size, materials, connectors, adaptor, inner tube, neck-plate, cuff, introducer (obturator), unit container, marking) for cuffed and plain paediatric tracheostomy tubes made of plastics materials and/or rubber having inside diameters from 2 mm to 6 mm.</p>"

33151,IS,,ISO 5366-3:2001,Anaesthetic and respiratory equipment — Tracheostomy tubes — Part 3: Paediatric tracheostomy tubes,Matériel respiratoire et d'anesthésie — Tubes de trachéostomie — Partie 3: Tubes de trachéostomie pédiatriques,2001-08-23,2,['11.040.10'],ISO/TC 121/SC 2,9599,[11410],[59782],"['en','fr']",12,

37896,IS,Cor,ISO 5366-3:2001/Cor 1:2003,Anaesthetic and respiratory equipment — Tracheostomy tubes — Part 3: Paediatric tracheostomy tubes — Technical Corrigendum 1,Matériel respiratoire et d'anesthésie — Tubes de trachéostomie — Partie 3: Tubes de trachéostomie pédiatriques — Rectificatif technique 1,2003-01-06,2,['11.040.10'],ISO/TC 121/SC 2,9599,,[59782],['en'],2,

11411,IS,,ISO 5367:1985,Breathing tubes used with anaesthetic apparatus and ventilators,Tuyaux de ventilation pour appareils d'anesthésie et ventilateurs,1985-07-04,2,['11.040.10'],ISO/TC 121/SC 2,9599,,[11412],"['en','fr']",,

11412,IS,,ISO 5367:1991,Breathing tubes intended for use with anaesthetic apparatus and ventilators,Tuyaux de ventilation destinés à être utilisés avec des appareils d'anesthésie et des ventilateurs,1991-08-08,3,['11.040.10'],ISO/TC 121/SC 2,9599,[11411],[28346],"['en','fr']",6,

28346,IS,,ISO 5367:2000,Breathing tubes intended for use with anaesthetic apparatus and ventilators,Tuyaux de ventilation destinés à être utilisés avec des appareils d'anesthésie et des ventilateurs,2000-06-08,4,['11.040.10'],ISO/TC 121/SC 2,9599,[11412],[55387],['en'],17,

55387,IS,,ISO 5367:2014,Anaesthetic and respiratory equipment — Breathing sets and connectors,Matériel d'anesthésie et de réanimation respiratoire — Systèmes respiratoires et raccords,2014-10-15,5,['11.040.10'],ISO/TC 121/SC 2,9599,[28346],[81540],"['en','fr']",35,"<p>ISO 5367:2014 specifies basic requirements for breathing sets and breathing tubes intended to be used with anaesthetic breathing systems, ventilator breathing systems, humidifiers or nebulizers. It applies to breathing sets and breathing tubes and patient end adaptors supplied already assembled and to those supplied as components and assembled in accordance with the manufacturer's instructions.</p><p>ISO 5367:2014 is applicable

11413,IS,,ISO 5369:1987,Breathing machines for medical use — Lung ventilators,Respirateurs médicaux — Ventilateurs pulmonaires,1987-06-25,1,['11.040.10'],ISO/TC 121/SC 3,9599,,[18746],"['en','fr']",18,

4610,IS,,ISO 537:1980,Plastics — Testing with the torsion pendulum,Plastiques — Essai au pendule de torsion,1980-03-01,1,['83.080.01'],ISO/TC 61,9599,,[4611],"['en','fr']",5,

4611,IS,,ISO 537:1989,Plastics — Testing with the torsion pendulum,Plastiques — Essai au pendule de torsion,1989-11-30,2,['83.080'],ISO/TC 61/SC 2,9599,[4610],"[13167,13168,25912,20987]","['en','fr']",8,

11421,IS,,ISO 5379:1983,Starches and derived products — Determination of sulfur dioxide content — Acidimetric method and nephelometric method,"Amidons, fécules et produits dérivés — Détermination de la teneur en dioxyde de soufre — Dosage acidimétrique et dosage par néphélémétrie",1983-08-01,1,['67.180.20'],ISO/TC 93,9599,,[50791],"['en','fr']",6,"<p>Entrainment in a current of nitrogen of the gas extracted from the acidified and heated product, and fixing and oxidation of the gas by bubbling through a dilute solution of neutral hydrogen peroxid. Titration of the sulphuric acid formed with standard volumetric sodium hydroxide solution of nephelometric determination in the case of low content

11425,IS,,ISO 5389:1992,Turbocompressors — Performance test code,Turbocompresseurs — Code d'essais des performances,1992-05-21,1,['23.140'],ISO/TC 118/SC 1,9599,,"[39665,27205]","['en','fr']",172,"<p>Covers blowers or compressors and exhausters of the centrifugal, mixed flow, or axial flow types, with and without intercooling, handling any vapour or gas the physical properties of which are reliably known. May be applied to any compression process, with or without bleed-off or sidestreams, which takes place in one or more casings. The theory used is based on the laws of similarity of fluid flow. The observation of these laws determines specific requirements for the execution of acceptance tes

11427,IS,,ISO 5391:1988,Pneumatic tools and machines — Vocabulary,Machines portatives pneumatiques et machines pneumatiques — Vocabulaire,1988-03-10,1,"['23.140','25.140.10','01.040.23','01.040.25']",ISO/TC 118/SC 3,9599,,[36692],"['en','fr']",8,"<p>Establishes terms and definitions in English and French for the categories as follows: general, tools for removing and shaping material (portable and fixed: rotary and percussive), tools for assembly work ( portable: rotary and reciprocating percussive ), tools for lifting, vibrators. Alphabetical indexes in English and French are also included.</p>"

11428,IS,,ISO 5393:1981,Rotary pneumatic assembly tools for threaded fasteners — Performance test,Outils pneumatiques rotatifs pour l'assemblage d'éléments de fixation filetés — Essai des caractéristiques de fonctionnement,1981-11-01,1,['25.140.10'],ISO/TC 118/SC 3,9599,,[11429],"['en','fr']",10,

11429,IS,,ISO 5393:1994,Rotary tools for threaded fasteners — Performance test method,Outils rotatifs pour éléments de fixation filetés — Méthode d'essai des caractéristiques de fonctionnement,1994-05-05,2,['25.140.10'],ISO/TC 118/SC 3,9599,[11428],"[42059,63133]","['en','fr']",10,"<p>Specifies a laboratory performance test method for power assembly tools for installing threaded fasteners. Gives instructions on what to test for and how to evaluate and present the test data. Is applicable to tools which apply torque continuously, i.e. does not apply e.g. to impact and ratchet wrenches.</p>"

11432,IS,,ISO 5395-1:1984,"Power lawn mowers, lawn tractors, and lawn and garden tractors with mowing attachments — Safety requirements and test procedures — Part 1: Definitions","Tondeuses à gazon à moteur, tracteurs de pelouse, tracteurs de jardin et de pelouse avec équipements de tonte adaptables — Règles de sécurité et méthodes d'essai — Partie 1: Définitions",1984-11-01,1,"['01.040.65','65.060.70']",ISO/TC 23/SC 13,9599,,[11430],"['en','fr']",7,

11430,IS,,ISO 5395:1990,"Power lawn-mowers, lawn tractors, lawn and garden tractors, professional mowers, and lawn and garden tractors with mowing attachments — Definitions, safety requirements and test procedures","Tondeuses à gazon à moteur, tracteurs de pelouse, tracteurs de jardin et de pelouse, tondeuses à usage professionnel, tracteurs de jardin et de pelouse avec équipements de tonte adaptables — Définitions, prescriptions de sécurité et modes opératoires d'essai",1990-10-25,1,['65.060.70'],ISO/TC 23/SC 13,9599,"[11434,11435,11432,11436,11433]","[29608,54939,37699,51082,54938]","['en','fr']",46,"<p>Establishes terms and definitions, specifies safety requirements and test procedures. T

11431,IS,Amd,ISO 5395:1990/Amd 1:1992,"Power lawn-mowers, lawn tractors, lawn and garden tractors, professional mowers, and lawn and garden tractors with mowing attachments — Definitions, safety requirements and test procedures — Amendment 1","Tondeuses à gazon à moteur, tracteurs de pelouse, tracteurs de jardin et de pelouse, tondeuses à usage professionnel, tracteurs de jardin et de pelouse avec équipements de tonte adaptables — Définitions, prescriptions de sécurité et modes opératoires d'essai — Amendement 1",1992-07-29,1,['65.060.70'],ISO/TC 23/SC 13,9599,,"[54939,37699,51082,54938]","['en','fr']",1,"<p>Amends definitions 1.3.21 (lawn edge trimmer) and 1.3.22 (lawn trimmer), adds text t

11433,IS,,ISO 5395-2:1981,"Power lawn mowers, lawn tractors, and lawn and garden tractors with mowing attachments — Safety requirements and test procedures — Part 2: Basic requirements","Tondeuses à gazon à moteur, tracteurs de pelouse, tracteurs de jardin et de pelouse avec équipements de tonte adaptables — Règles de sécurité et méthodes d'essai — Partie 2: Spécifications communes",1981-07-01,1,['65.060.70'],ISO/TC 23/SC 13,9599,,[11430],"['en','fr']",3,

11434,IS,,ISO 5395-3:1985,"Power lawn mowers, lawn tractors, and lawn and garden tractors with mowing attachments — Safety requirements and test procedures — Part 3: Requirements for rotary mowers","Tondeuses à gazon à moteur, tracteurs de pelouse, tracteurs de jardin et de pelouse avec équipements de tonte adaptables — Règles de sécurité et méthodes d'essai — Partie 3: Spécifications des tondeuses à axe vertical",1985-03-07,1,['65.060.70'],ISO/TC 23/SC 13,9599,,[11430],"['en','fr']",,

11435,IS,Add,ISO 5395-3:1985/Add 1:1986,"Power lawn mowers, lawn tractors, and lawn and garden tractors with mowing attachments — Safety requirements and test procedures — Part 3: Requirements for rotary mowers — Addendum 1","Tondeuses à gazon à moteur, tracteurs de pelouse, tracteurs de jardin et de pelouse avec équipements de tonte adaptables — Règles de sécurité et méthodes d'essai — Partie 3: Spécifications des tondeuses à axe vertical — Additif 1",1986-12-18,1,['65.060.70'],ISO/TC 23/SC 13,9599,,[11430],['fr'],,

11436,IS,,ISO 5395-4:1983,"Power lawn mowers, lawn tractors, and lawn and garden tractors with mowing attachments — Safety requirements and test procedures — Part 4: Requirements for cylinder (reel) mowers","Tondeuses à gazon à moteur, tracteurs de pelouse, tracteurs de jardin et de pelouse avec équipements de tonte adaptables — Règles de sécurité et méthodes d'essai — Partie 4: Spécifications des tondeuses à lames hélicoïdales",1983-02-01,1,['65.060.70'],ISO/TC 23/SC 13,9599,,[11430],"['en','fr']",7,

39873,IS,,ISO 5398-1:2007,Leather — Chemical determination of chromic oxide content — Part 1: Quantification by titration,Cuir — Dosage chimique de l'oxyde de chrome — Partie 1: Quantification par titrage,2007-07-31,1,['59.140.30'],IULTCS,9599,,[73703],"['en','fr']",5,"<p>ISO 5398-1:2007 describes a method for the determination of chromium in aqueous solution obtained from leather. This is an analysis for total chromium in leather; it is not compound specific or specific to its oxidation state. </p><p>This method describes the determination of chrome by iodometric titration and is to be applicable to chromium-tanned leathers which are expected to have chromic oxide contents in excess of 0,3

39829,IS,,ISO 5398-3:2007,Leather — Chemical determination of chromic oxide content — Part 3: Quantification by atomic absorption spectrometry,Cuir — Dosage chimique de l'oxyde de chrome — Partie 3: Quantification par spectrométrie d'absorption atomique,2007-07-31,1,['59.140.30'],IULTCS,9599,,[73704],"['en','fr']",6,"<p>ISO 5398-3:2007 describes a method for the determination of chromium in aqueous solution obtained from leather. This is an analysis for total chromium in leather; it is not compound specific or specific to its oxidation state. </p><p>This method describes the determination of chromium by atomic absorption spectrometry and is applicable to leathers which are expected to have c

39830,IS,,ISO 5398-4:2007,Leather — Chemical determination of chromic oxide content — Part 4: Quantification by inductively coupled plasma - optical emission spectrometer (ICP-OES),Cuir — Dosage chimique de l'oxyde de chrome — Partie 4: Quantification par plasma à couplage inductif - spectromètre d'émission optique (ICP-OES),2007-07-31,1,['59.140.30'],IULTCS,9599,,[73705],"['en','fr']",6,"<p>ISO 5398-4:2007 describes a method for the determination of chromium in aqueous solution obtained from leather. This is an analysis for total chromium in leather; it is not compound specific or specific to its oxidation state. </p><p>This method describes the determination of chromium by inductively coup

3691,IS,,ISO 54:1977,Cylindrical gears for general engineering and for heavy engineering — Modules and diametral pitches,Engrenages cylindriques de mécanique générale et de grosse mécanique — Modules et diametral pitches,1977-05-01,1,['21.200'],ISO/TC 60,9599,,[22644],"['en','fr']",1,

4616,IS,,ISO 540:1981,Solid mineral fuels — Determination of fusibility of ash — High-temperature tube method,Combustibles minéraux solides — Détermination de la fusibilité des cendres — Méthode du tube à haute température,1981-11-01,2,['75.160.10'],ISO/TC 27,9599,,[20315],"['en','fr']",3,

20315,IS,,ISO 540:1995,Solid mineral fuels — Determination of fusibility of ash — High-temperature tube method,Combustibles minéraux solides — Détermination de la fusibilité des cendres — Méthode du tube à haute température,1995-03-09,3,['75.160.10'],ISO/TC 27/SC 5,9599,[4616],[41484],['en'],5,<p>Cancels and replaces the second edition (1981). Specifies a method of determining the characteristic fusion temperatures of ash from solid mineral fuels.</p>

41484,IS,,ISO 540:2008,Hard coal and coke — Determination of ash fusibility,Houille et coke — Détermination de la fusibilité des cendres,2008-05-28,4,"['73.040','75.160.10']",ISO/TC 27/SC 5,9599,[20315],[86998],"['en','ru']",10,<p>ISO 540:2008 specifies a method of determining the characteristic fusion temperatures of ash from coal and coke.</p>

51512,IS,,ISO 5402-1:2011,Leather — Determination of flex resistance — Part 1: Flexometer method,Cuir — Détermination de la résistance à la flexion — Partie 1: Méthode au flexomètre,2011-12-07,1,['59.140.30'],IULTCS,9599,[31306],[67103],"['en','fr']",6,"<p>ISO 5402-1:2011 specifies a method for determining the wet or dry flex resistance of leather and finishes applied to leather. It is applicable to all types of flexible leather which are less than 3,0 mm thick.</p>"

67103,IS,,ISO 5402-1:2017,Leather — Determination of flex resistance — Part 1: Flexometer method,Cuir — Détermination de la résistance à la flexion — Partie 1: Méthode au flexomètre,2017-02-02,2,['59.140.30'],IULTCS,9599,[51512],[75893],"['en','fr']",7,"<p>ISO 5402-1:2017 specifies a method for determining the wet or dry flex resistance of leather and finishes applied to leather. It is applicable to all types of flexible leather below 3,0 mm in thickness.</p>"

31306,IS,,ISO 5402:2002,Leather — Physical and mechanical tests — Determination of flex resistance by flexometer method,Cuir — Essais physiques et mécaniques — Détermination de la résistance à la flexion à l'aide d'un flexomètre,2002-12-05,1,['59.140.30'],IULTCS,9599,,[51512],"['en','fr']",5,"<p>ISO 5402:2002 specifies a method for determining the wet or dry flex resistance of leather and finishes applied to leather. It is applicable to all types of leather below 3,0 mm in thickness.</p>"

51508,IS,,ISO 5403-1:2011,Leather — Determination of water resistance of flexible leather — Part 1: Repeated linear compression (penetrometer),Cuir — Détermination de l'imperméabilité à l'eau des cuirs souples — Partie 1: Compression linéaire répétée (pénétromètre),2011-12-05,1,"['61.060','59.140.30']",IULTCS,9599,[24035],[89998],"['en','fr']",7,<p>ISO 5403-1:2011 specifies a method for determining the dynamic water resistance of leather by means of repeated linear compression. It is applicable to all flexible leathers but is particularly suitable for leathers intended for footwear applications.</p>

24035,IS,,ISO 5403:2002,Leather — Physical and mechanical tests — Determination of water resistance of flexible leather,Cuir — Essais physiques et mécaniques — Détermination de l'imperméabilité à l'eau des cuirs souples,2002-12-05,1,"['61.060','59.140.30']",IULTCS,9599,,[51508],"['en','fr']",7,<p>ISO 5403:2002 specifies a method for determining the dynamic water resistance of leather. It is applicable to all flexible leathers but is particularly suitable for leathers intended for footwear uppers.</p>

31151,IS,,ISO 5404:2002,Leather — Physical and mechanical tests — Determination of the water resistance of heavy leathers,Cuir — Essais physiques et mécaniques — Détermination de la résistance à l'eau des cuirs épais,2002-12-05,1,['59.140.30'],IULTCS,9599,,[51509],"['en','fr']",7,"<p>ISO 5404:2002 specifies a method for determining the water resistance of heavy leathers. The method allows determination of the penetration time, water absorption, area of penetration and water penetration rate as required. It is applicable to all types of heavy leathers.</p>"

11448,IS,,ISO 5406:1980,The mechanical balancing of flexible rotors,Équilibrage mécanique des rotors flexibles,1980-11-01,1,['21.120.40'],ISO/TC 108,9599,,[19305],"['en','fr']",30,

11450,IS,,ISO 5408:1983,Cylindrical screw threads — Vocabulary,Filetages cylindriques — Vocabulaire,1983-12-01,1,"['21.040.01','01.040.21']",ISO/TC 1,9599,,"[44424,23595]","['en','fr']",10,<p>Provides fundamental terms and definitions in English and French applicable to threads with profiles (in an axial plane) based on triangles; a list of Russian equivalent terms is given in annex A; the annexes B and C include the equivalent terms in German and Italian.</p>

11451,IS,,ISO 5413:1976,Machine tools — Positive drive of Morse tapers,Machines-outils — Entraînement positif de cônes Morse,1976-11-01,1,['25.060.20'],ISO/TC 29,9599,,[21092],"['en','fr']",1,

11452,IS,,ISO 5414-1:1982,Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 1: Dimensions of the driving system of tool shanks,"Mandrins porte-outils, à vis de blocage, pour outils à queue cylindrique à méplat — Partie 1: Dimensions du système d'entraînement des queues d'outils",1982-02-01,1,['25.060.20'],ISO/TC 29,9599,,[11453],"['en','fr']",2,

11453,IS,,ISO 5414-1:1985,Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 1: Dimensions of the driving system of tool shanks,"Mandrins porte-outils, à vis de blocage, pour outils à queue cylindrique à méplat — Partie 1: Dimensions du système d'entraînement des queues d'outils",1985-11-07,2,['25.060.20'],ISO/TC 29,9599,[11452],[37074],"['en','fr']",2,<p>ISO5414-1 was first publisded in 1982. This second edition cancels and replaces the first edition. Lays down dimensions of the driving system and also the maximum diameter of the chuck nose. Defines two types of drive (chucks for driving parallel shank tools with a single flat or with a double flat).</p

11454,IS,,ISO 5414-2:1982,Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 2: Connecting dimensions of chucks,"Mandrins porte-outils, à vis de blocage, pour outils à queue cylindrique à méplat — Partie 2: Dimensions d'encombrement des mandrins",1982-01-01,1,['25.060.20'],ISO/TC 29,9599,,[35254],"['en','fr']",4,<p>ISO 5414-2 specifies the dimensions of two types of connection: chucks with 7/24 taper shanks for tool shanks with either single flat or a double flat and chucks with Morse taper shanks for tool shanks with a single flat only. Morse tapers shall conform with ISO 296 and ISO 5413 and 7/24 tapers shall conform with ISO 297 and ISO 2583. Flatted

11455,IS,,ISO 5415:1977,Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw,"Douilles de réduction aux cônes extérieur 7/24 et intérieur Morse, avec vis incorporée",1977-03-01,1,['25.060.20'],ISO/TC 29,9599,,[42236],"['en','fr']",2,<p>Lays down the dimensions of these reduction sleeves. Applies to 7/24 taper Nos. 30 - 40 - 45 - 50 and 60 and Morse taper Nos. 1 to 6. Morse tapers Nos. 4 - and 6 being either with positive drive (sleeves of type B) or without positive drive (sleeves of type A). These sleeves permit driving of tools with Morse taper shanks with tapped holes with the aid of an internal screw. The form of this screw and its fixation in the sleeve a

11456,IS,,ISO 5416:1987,Direct reduced iron — Determination of metallic iron content — Bromine-methanol titrimetric method,Minerais de fer préréduits — Dosage du fer métallique — Méthode titrimétrique au brome-méthanol,1987-10-22,1,['73.060.10'],ISO/TC 102/SC 2,9599,,[21686],"['en','fr']",8,

21686,IS,,ISO 5416:1997,Direct reduced iron — Determination of metallic iron content — Bromine-methanol titrimetric method,Minerais de fer préréduits — Dosage du fer métallique — Méthode titrimétrique au brome-méthanol,1997-07-10,2,['73.060.10'],ISO/TC 102/SC 2,9599,[11456],[39727],['en'],12,

11461,IS,,ISO 5418-1:1994,"Iron ores — Determination of copper content — Part 1: 2,2'-Biquinolyl spectrophotometric method","Minerais de fer — Dosage du cuivre — Partie 1: Méthode spectrophotométrique à la biquinoléine-2,2'",1994-05-19,1,['73.060.10'],ISO/TC 102/SC 2,9599,[11460],[43946],"['en','fr']",9,"<p>The principle of the method specified is decomposition of the test portion by treatment with hydrochloric, nitric and perchloric acids, dehydration of silica, dilution and filtration, ignition of the residue, treatment with hydrofluoric and sulfuric acids, fusion with sodium carbonate, dissolution of the cooled melt in the filtrate, reduction of copper(II) to form the red-violet complex o

11460,IS,,ISO 5418:1984,"Iron ores — Determination of copper content — 2,2'-Biquinolyl spectrophotometric method","Minerais de fer — Dosage du cuivre — Méthode spectrophotométrique à la biquinoléine-2,2'",1984-06-01,1,['73.060'],ISO/TC 102/SC 2,9599,,[11461],"['en','fr']",8,

4618,IS,,ISO 542:1980,Oilseeds — Sampling,Graines oléagineuses — Échantillonnage,1980-03-01,1,['67.200.20'],ISO/TC 34/SC 2,9599,,[4619],['en'],6,

4619,IS,,ISO 542:1990,Oilseeds — Sampling,Graines oléagineuses — Échantillonnage,1990-10-04,2,['67.200.20'],ISO/TC 34/SC 2,9599,[4618],"[70471,40680,55358]","['en','fr']",8,"<p>Specifies general conditions relating to the sampling for the assessment of quality of oilseeds purchased as industrial raw materials. Nine figures show exemples of suitable apparatus. There is specified the limitationof the size of lot, methods of taking samples, packaging and labelling of samples, the dispatch of samples and the sampling report.</p>"

11470,IS,,ISO 5428:1980,Greek alphabet coded character set for bibliographic information interchange,Jeu de caractères grecs codés employé pour l'échange d'information bibliographique,1980-10-01,1,"['35.240.30','35.040.10']",ISO/TC 46/SC 4,9599,,[11471],['en'],6,

11472,IS,,ISO 5429:1977,Coated abrasives — Flap wheels with incorporated flanges or separate flanges — Designation and dimensions,Abrasifs appliqués — Roues à lamelles à flasques incorporés ou amovibles — Désignation et dimensions,1977-11-01,1,['25.100.70'],ISO/TC 29/SC 5,9599,,[36552],"['en','fr']",1,"<p>Gives the outside diameter, and the width of the flap wheel, together with the bore diameter of the associated flange, for flap wheels with incorporated flanges or separate flanges. shows a sketch of the flange which does not prejudge the shape or the method of attaching the flange and the flap wheel.</p>"

36552,IS,,ISO 5429:2005,Coated abrasives — Flap wheels with incorporated flanges or separate flanges,Abrasifs appliqués — Roues à lamelles à flasques incorporés ou amovibles,2005-04-08,2,['25.100.70'],ISO/TC 29/SC 5,9599,[11472],[56013],"['en','fr','ru']",2,<p>ISO 5429:2005 specifies the nominal dimensions and limit deviations of flap wheels with incorporated flanges or separate flanges for use on stationary grinding machines.</p>

4620,IS,,ISO 543:1974,"Cinematography — Motion-picture safety film — Definition, testing and marking","Cinématographie — Film cinématographique de sécurité — Définition, essais et marquage",1974-07-01,1,['37.060.20'],ISO/TC 36,9599,,[4621],"['en','fr']",8,

4621,IS,,ISO 543:1990,Photography — Photographic films — Specifications for safety film,Photographie — Films photographiques — Spécifications pour le film de sécurité,1990-11-29,2,['37.040.20'],ISO/TC 42,9599,"[4620,14752]",[31930],"['en','fr']",5,

11474,IS,,ISO 5431:1999,Leather — Wet blue goat skins — Specification,Cuir — Peaux de caprins à l'état 'bleu humide' — Spécifications,1999-03-11,1,['59.140.30'],ISO/TC 120/SC 2,9599,,[62665],['en'],7,

62665,IS,,ISO 5431:2013,Leather — Wet blue goat skins — Specification,Cuir — Peaux de caprins à l'état 'bleu humide' — Spécifications,2013-07-31,2,['59.140.30'],ISO/TC 120/SC 2,9599,[11474],[82563],['en'],4,"<p>ISO 5431:2013 specifies requirements, methods of sampling and methods of test for wet blue leather produced from goat skins tanned without hair and with the use of basic chromium sulfate as the primary tanning agent.</p>"

11475,IS,,ISO 5432:1999,Leather — Wet blue sheep skins — Specification,Cuir — Peaux d'ovins à l'état 'bleu humide' — Spécifications,1999-12-16,1,['59.140.30'],ISO/TC 120/SC 2,9599,,[62667],['en'],7,

62667,IS,,ISO 5432:2013,Leather — Wet blue sheep skins — Specification,Cuir — Peaux d'ovins à l'état 'bleu humide' — Spécifications,2013-07-30,2,['59.140.30'],ISO/TC 120/SC 2,9599,[11475],[82564],['en'],4,"<p>ISO 5432:2013 specifies requirements, methods of sampling and methods of test for wet blue leather produced from sheep skins tanned without wool and with the use of basic chromium sulfate as the primary tanning agent.</p>"

11476,IS,,ISO 5433:1999,Leather — Bovine wet blue — Specification,Cuir — Peaux de bovins à l'état 'bleu humide' — Spécifications,1999-03-11,1,['59.140.30'],ISO/TC 120/SC 2,9599,,[62664],['en'],8,

62664,IS,,ISO 5433:2013,Leather — Bovine wet blue — Specification,Cuir — Peaux de bovins à l'état 'bleu humide' — Spécifications,2013-08-22,2,['59.140.30'],ISO/TC 120/SC 2,9599,[11476],[82565],['en'],5,"<p>ISO 5433:2013 specifies requirements, methods of sampling and methods of test for wet blue leather produced from bovine hides and parts of bovine hides tanned without hair and with the use of basic chromium sulfate as the primary tanning agent.</p>"

11478,IS,,ISO 5435:1981,Rubber compounding ingredients — Carbon black — Determination of tinting strength,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination du pouvoir colorant,1981-10-01,1,['83.040.20'],ISO/TC 45,9599,,[11479],['en'],4,

11479,IS,,ISO 5435:1991,Rubber compounding ingredients — Carbon black — Determination of tinting strength,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination du pouvoir colorant,1991-10-10,2,['83.040.20'],ISO/TC 45/SC 3,9599,[11478],[21880],"['en','fr']",6,

21880,IS,,ISO 5435:1994,Rubber compounding ingredients — Carbon black — Determination of tinting strength,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination du pouvoir colorant,1994-08-04,3,['83.040.20'],ISO/TC 45/SC 3,9599,[11479],[43777],"['en','fr']",6,<p>Cancels and replaces the second edition (1991). Specifies a method for the determination of the tinting strength of carbon black relative to an industry tint reference black. The method is based on the use of three different commercial instruments. Other instruments may be used but they shall have at least equivalent performance.</p>

43777,IS,,ISO 5435:2008,Rubber compounding ingredients — Carbon black — Determination of tinting strength,Ingrédients de mélange du caoutchouc — Noir de carbone — Détermination du pouvoir colorant,2008-11-05,4,['83.040.20'],ISO/TC 45/SC 3,9599,[21880],[72851],"['en','fr']",15,"<p>ISO 5435:2008 specifies a method for the determination of the tinting strength of carbon black relative to an industry tint reference black.</p><p>The method is based on the use of five different commercial instruments. Other instruments may be used if the test results for the standard reference blacks are within the control limits given in ASTM D 4821.</p><p>NOTE The Densichron reflectometer and the Meeco

11480,IS,,ISO 5436:1985,"Calibration specimens — Stylus instruments — Types, calibration and use of specimens","Échantillons d'étalonnage — Instruments à palpeur — Type, étalonnage et emploi des échantillons",1985-08-29,1,['83.040.20'],ISO/TC 213,9599,,"[21978,28088]","['en','fr']",20,"<p>Specifies the characteristics of specimens for the calibration of stylus instruments and the annexes give information regarding their calibration and application to the calibration and adjustment in laboratories, standards rooms and workshops.</p>"

28088,IS,,ISO 5436-2:2001,Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards,Spécification géométrique des produits (GPS) — État de surface: Méthode du profil; Étalons — Partie 2: Étalons logiciels,2001-12-20,1,['17.040.30'],ISO/TC 213,9599,[11480],[61261],"['en','fr']",15,

45308,IS,Cor,ISO 5436-2:2001/Cor 1:2006,Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards — Technical Corrigendum 1,Spécification géométrique des produits (GPS) — État de surface: Méthode du profil; Étalons — Partie 2: Étalons logiciels — Rectificatif technique 1,2006-11-28,1,['17.040.30'],ISO/TC 213,9599,,[61261],"['en','fr']",1,

51387,IS,Cor,ISO 5436-2:2001/Cor 2:2008,Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards — Technical Corrigendum 2,Spécification géométrique des produits (GPS) — État de surface: Méthode du profil; Étalons — Partie 2: Étalons logiciels — Rectificatif technique 2,2008-04-22,1,['17.040.30'],ISO/TC 213,9599,,[61261],"['en','fr']",2,

11481,IS,,ISO 5437:1988,Acid-grade and ceramic-grade fluorspar — Determination of barium sulfate content — Gravimetric method,Spaths fluor pour la fabrication de l'acide fluorhydrique et spaths fluor utilisables dans l'industrie céramique — Dosage du sulfate de baryum — Méthode gravimétrique,1988-11-24,1,['73.080'],ISO/TC 175,9599,,[11482],"['en','fr']",2,