Withdrawn and superseded ISO standards — page 130 of 246

11271,IS,,ISO 5275:1979,Aromatic hydrocarbons — Test for presence of mercaptans (thiols) — Doctor test,Hydrocarbures aromatiques — Essai de détection des mercaptans (thiols) — 'Doctor test',1979-10-01,1,['71.080.15'],ISO/TC 28,9599,,[34283],"['en','fr']",2,"<p>Specifies the detection of thioalcohols. Hydrogen sulphide can also be detected by the test. Inapplicable in the presence of only traces of peroxides. Shaking of a test portion with sodium plumbite solution (Doctor solution) and observation of the mixture. From its appearence, the presence of thioalcohols, hydrogen sulphide, peroxides or elemental sulphur can be deduced. Confirmation by the addition of sulphur, shaking and observation

11279,IS,,ISO 5284:1983,Conveyor belts — List of equivalent terms,Courroies transporteuses — Liste des termes équivalents,1983-06-01,1,['53.040.20'],ISO/TC 41/SC 3,9599,,[11280],"['en','fr']",29,

11280,IS,,ISO 5284:1986,Conveyor belts — List of equivalent terms,Courroies transporteuses — Liste des termes équivalents,1986-12-18,2,"['53.040.20','01.040.53']",ISO/TC 41/SC 3,9599,[11279],"[84927,30117]","['en','fr','ru']",52,"<p>This second edition cancels and replaces the first edition (1983). Contains terms in English (in American, if different), French, German, Italian, Spanish, and Russian. The terms are listed in the alphabetical order of the english language. Alphabetical indexes for each language mentioned are also included.</p>"

43382,IS,Cor,ISO 5284:1986/Cor 1:2005,Conveyor belts — List of equivalent terms — Technical Corrigendum 1,Courroies transporteuses — Liste des termes équivalents — Rectificatif technique 1,2005-12-09,2,"['53.040.20','01.040.53']",ISO/TC 41/SC 3,9599,,[84927],"['en','fr','ru']",2,

11281,IS,,ISO 5285:1978,Conveyor belts — Guide to storage and handling,Courroies transporteuses — Guide pour le stockage et la manutention,1978-11-01,1,['53.040.20'],ISO/TC 41,9599,,"[38944,27297]","['en','fr']",2,"<p>Provides a guide to the most suitable conditions for the storage and handling of belts. Four figures illustrate shapes and methods of lifting (figure 1: recommended method, figure 2: permissible method, figure 3: dangerous and unacceptable method, figure 4: method to be used with caution).</p>"

38944,IS,,ISO 5285:2004,Conveyor belts — Guidelines for storage and handling,Courroies transporteuses — Lignes directrices pour le stockage et la manutention,2004-03-24,2,['53.040.20'],ISO/TC 41/SC 3,9599,[11281],[61041],"['en','fr']",8,<p>ISO 5285:2004 gives guidelines for creating the most suitable conditions for the storage and handling of conveyor belts. It is not applicable to light conveyor belts as described in EN 873.</p>

11282,IS,,ISO 5287:1978,Narrow V-belt drives for the automotive industry — Fatigue test,Transmissions par courroies trapézoïdales étroites pour la construction automobile — Essai de fatigue,1978-04-01,1,['43.060.10'],ISO/TC 41,9599,,[11283],"['en','fr']",4,

11283,IS,,ISO 5287:1985,Narrow V-belt drives for the automotive industry — Fatigue test,Transmissions par courroies trapézoïdales étroites pour la construction automobile — Essai de fatigue,1985-05-23,2,['43.060.10'],ISO/TC 41/SC 1,9599,[11282],[38221],"['en','fr']",5,<p>This second edition cancels and replaces the first edition (1978). Specifies a fatigue test for the quality control of V-blets of sections AV 10 and AV 13 intended for driving the auxiliaries of internal combustion engines. The dimensional characteristics of these belts and of the corresponding pulleys are subject of ISO 2790.</p>

38221,IS,,ISO 5287:2003,Belt drives — Narrow V-belts for the automotive industry — Fatigue test,Transmissions par courroies — Transmissions par courroies trapézoïdales étroites pour la construction automobile — Essai de fatigue,2003-07-30,3,['43.060.10'],ISO/TC 41/SC 1,9599,[11283],[81567],"['en','fr']",8,<p>ISO 5287:2003 specifies a fatigue test for the quality control of narrow V-belts (sections AV 10 and AV 13) intended for driving the auxiliaries of internal combustion engines used for automotive purposes.</p>

11284,IS,,ISO 5288:1982,Synchronous belt drives — Vocabulary,Transmissions synchrones par courroies — Vocabulaire,1982-01-01,1,"['21.220.10','01.040.21']",ISO/TC 41,9599,,[27004],"['en','fr','ru']",25,

27004,IS,,ISO 5288:2001,Synchronous belt drives — Vocabulary,Transmissions synchrones par courroies — Vocabulaire,2001-04-12,2,"['21.220.10','01.040.21']",ISO/TC 41/SC 4,9599,[11284],[70625],"['en','fr']",14,

70625,IS,,ISO 5288:2017,Synchronous belt drives — Vocabulary,Transmissions synchrones par courroies — Vocabulaire,2017-12-19,3,"['21.220.10','01.040.21']",ISO/TC 41/SC 4,9599,[27004],[89598],"['en','fr']",23,<p>ISO 5288:2017 specifies the terms and definitions related to the use of synchronous belt drives for mechanical power transmission and where positive indexing or synchronization is required.</p>

11285,IS,,ISO 5289:1978,"Endless hexagonal belts for agricultural machinery, and groove sections of corresponding pulleys",Courroies hexagonales sans fin pour machines agricoles et profils de gorges des poulies correspondantes,1978-05-01,1,['65.060.01'],ISO/TC 41,9599,,[11286],"['en','fr']",4,

11286,IS,,ISO 5289:1992,Agricultural machinery — Endless hexagonal belts and groove sections of corresponding pulleys,Machines agricoles — Courroies hexagonales sans fin et profils de gorges des poulies correspondantes,1992-06-11,2,['65.060.01'],ISO/TC 41/SC 1,9599,[11285],[70615],"['en','fr']",5,<p>Specifies the main dimensions and corresponding tolerances and gives a method to measure the lengths of belts.</p>

4597,IS,,ISO 529:1975,Short machine taps and hand taps,Tarauds courts à machine et à main,1975-11-01,1,['25.100.50'],ISO/TC 29,9599,,[4598],"['en','fr']",34,

4599,IS,Amd,ISO 529:1975/Amd 1:1981,Short machine taps and hand taps — Amendment 1,Tarauds courts à machine et à main — Amendement 1,1981-05-01,1,['25.100.01'],ISO/TC 29,9599,,[4598],['en'],2,

4600,IS,Amd,ISO 529:1975/Amd 2:1983,Short machine taps and hand taps — Amendment 2,Tarauds courts à machine et à main — Amendement 2,1983-05-01,1,['25.100.50'],ISO/TC 29,9599,,[4598],"['en','fr']",1,

4598,IS,,ISO 529:1993,Short machine taps and hand taps,Tarauds courts à machine et à main,1993-01-21,2,['25.100.50'],ISO/TC 29/SC 9,9599,"[4600,4597,4599]",[69200],"['en','fr']",25,"<p>Specifies the general dimensions: length of thread (maximum), overall length, shank diameter and dimensions of driving square, dimensions of the connecting portion between the shank and threaded part. Applies to taps intended for cutting the following threads: ISO metric threads (coarse and fine pitch), ISO inch threads ('Unified Coarse' series (UNC) and 'Unified Fine' series (UNF)), and non-recommended inch threads ('British Standard Whitworth' (BSW) and 'British Standard Fine' (BSF), 'British Association' (B

11287,IS,,ISO 5290:1978,"Grooved pulleys for joined narrow V-belts — Groove sections 9J, 15J, 20J and 25J","Poulies à gorge pour courroies trapézoïdales jumelées étroites — Sections de gorge 9J, 15J, 20J et 25J",1978-05-01,1,['21.220.10'],ISO/TC 41,9599,,"[11288,11289]","['en','fr']",2,

11288,IS,,ISO 5290:1985,"Grooved pulleys for joined narrow V-belts — Groove sections 9J, 15J, 20J and 25J","Poulies à gorges pour courroies trapézoïdales jumelées étroites — Sections de gorge 9J, 15J, 20J et 25J",1985-10-10,2,['21.220.10'],ISO/TC 41/SC 1,9599,[11287],[11289],"['en','fr']",4,

11289,IS,,ISO 5290:1993,"Belt drives — Grooved pulleys for joined narrow V-belts — Groove sections 9J, 15J, 20J, and 25J (effective system)","Transmissions par courroies — Poulies à gorges pour courroies trapézoïdales jumelées étroites — Sections de gorge 9J, 15J, 20J et 25J (système effectif)",1993-04-15,3,['21.220.10'],ISO/TC 41/SC 1,9599,"[11287,11288]","[31493,34404]","['en','fr']",8,<p>This third edition cancels and replaces the second edition (1985). Specifies the principal characteristics of grooved pulleys intended for V-belts for industrial power transmission drives. Tabulates the nominal effective diameters from 67 mm up to and including 2500 mm. An annex gives some background info

11290,IS,,ISO 5291:1987,"Belt drives — Grooved pulleys for joined classical V-belts — Groove sections AJ, BJ, CJ and DJ (effective system)","Poulies à gorges pour courroies trapézoïdales jumelées classiques — Sections de gorge AJ, BJ, CJ et DJ (système effectif)",1987-11-26,1,['21.220.10'],ISO/TC 41/SC 1,9599,,[11291],"['en','fr']",2,

11291,IS,,ISO 5291:1993,"Belt drives — Grooved pulleys for joined classical V-belts — Groove sections AJ, BJ, CJ and DJ (effective system)","Transmissions par courroies — Poulies à gorges pour courroies trapézoïdales jumelées classiques — Sections de gorge AJ, BJ, CJ et DJ (système effectif)",1993-05-06,2,['21.220.10'],ISO/TC 41/SC 1,9599,[11290],[56058],"['en','fr']",5,"<p>Specifies the principal characteristics (groove angle, profile dimensions, effective diameter) and geometrical inspection of grooves; quality, surface finish and balancing of pulleys are dealt with in ISO 254.</p>"

11292,IS,,ISO 5292:1980,Industrial V-belt drives — Calculation of power ratings,Transmissions industrielles par courroies trapézoïdales — Calcul des puissances transmissibles,1980-03-01,1,['21.220.10'],ISO/TC 41,9599,,[11293],"['en','fr']",1,

11295,IS,,ISO 5293:1981,Conveyor belts — Formula for transition distance on three equal length idler rolls,Courroies transporteuses — Formule de calcul de la distance de transition d'auge à trois rouleaux égaux,1981-12-01,1,['53.040.20'],ISO/TC 41,9599,,"[39063,23684]","['en','fr']",3,"<p>Specifies the formula to calculate conveyor belt transition distances. Tabulates the ratios of belt tension at transition to maximum rated belt tension from 1,0 to 0,05. Three figures illustrate shapes and reference quantities of concern. An annex gives the derivation of the formula for transition distance.</p>"

11296,IS,,ISO 5294:1979,Synchronous belt drives — Pulleys,Transmissions synchrones par courroies — Poulies,1979-07-01,1,['21.220.10'],ISO/TC 41,9599,,[11297],"['en','fr']",8,

11297,IS,,ISO 5294:1989,Synchronous belt drives — Pulleys,Transmissions synchrones par courroies — Poulies,1989-07-06,2,['21.220.10'],ISO/TC 41/SC 4,9599,[11296],"[56003,35286]","['en','fr']",10,"<p>This second edition cancels and replaces the first edition (1979). Specifies the principal characteristics of sychronous pulleys for use in synchronous endless belt drives for mechanical power and where positive indexing or sychronization may be required. The principal characteristics include: tooth dimensions and tolerances, pulley dimensions and tolerances, quality specification.</p>"

11299,IS,,ISO 5295:1981,Synchronous belts — Calculation of power rating and drive centre distance,Courroies synchrones — Calcul de la puissance transmissible et de l'entraxe,1981-12-01,1,['21.220.10'],ISO/TC 41,9599,,[11300],"['en','fr']",3,

11300,IS,,ISO 5295:1987,Synchronous belts — Calculation of power rating and drive centre distance,Courroies synchrones — Calcul de la puissance transmissible et de l'entraxe,1987-11-19,2,['21.220.10'],ISO/TC 41/SC 4,9599,[11299],[70626],"['en','fr']",3,<p>This second edition cancels and replaces the first edition (1981). Establishes formulae for the calculation of power synchronous belts on two pulley drives. The numerical values of certain parameters used in the calculation depend upon the pitch and the construction of the belt and shall be specified by the belt manufacturer.</p>

70626,IS,,ISO 5295:2017,Synchronous belts — Calculation of power rating and drive centre distance,Courroies synchrones — Calcul de la puissance transmissible et de l'entraxe,2017-04-25,3,['21.220.10'],ISO/TC 41/SC 4,9599,[11300],[86235],['en'],5,<p>ISO 5295:2017 establishes formulae for the calculation of power rating and centre distance of standard synchronous belts on two pulley drives.</p><p>It is applicable to trapezoidal belts only. It does not apply to curvilinear synchronous belts.</p><p>The numerical values of certain parameters used in the calculations depend upon the pitch and the construction of the belt and are specified by the belt manufacturer.</p>

11304,IS,,ISO 5296-1:1989,"Synchronous belt drives — Belts — Part 1: Pitch codes MXL, XL, L, H, XH and XXH — Metric and inch dimensions","Transmissions synchrones par courroies — Courroies — Partie 1: Symboles de pas MXL, XL, L, H, XH et XXH — Dimensions métriques et en inches",1989-07-06,1,['21.220.10'],ISO/TC 41/SC 4,9599,[11301],"[35700,56001]","['en','fr']",8,"<p>This second edition cancels and replaces the first edition of ISO 5296:1978, as well as its addenda 1 and 2 of 1982. This part specifies the principal characteristics of synchronous endless belts for use in synchronous belt drives for mechnical power transmission and where positive indexing or synchronization may be required.</p

11301,IS,,ISO 5296:1978,Synchronous belt drives — Belts,Transmissions synchrones par courroies — Courroies,1978-09-01,1,['21.220.10'],ISO/TC 41,9599,,[11304],['en'],5,

11305,IS,,ISO 5296-2:1989,Synchronous belt drives — Belts — Part 2: Pitch codes MXL and XXL — Metric dimensions,Transmissions synchrones par courroies — Courroies — Partie 2: Symboles de pas MXL et XXL — Dimensions métriques,1989-07-06,1,['21.220.10'],ISO/TC 41/SC 4,9599,,"[35700,56001]","['en','fr']",4,"<p>This part specifies the principal characteristics of synchronous endless belts for use in synchronous belt drives for mechanical power transmission and where positive indexing or synchronization may be required. Applies to synchronous belt drives having a pitch equal to 2,032 or 3,175 mm.</p>"

3690,IS,,ISO 53:1974,Cylindrical gears for general and heavy engineering — Basic rack,Engrenages cylindriques de mécanique générale et de grosse mécanique — Crémaillère de référence,1974-08-01,1,['21.200'],ISO/TC 60,9599,,[22643],"['en','fr']",1,

11318,IS,,ISO 5311:1983,Fertilizers — Determination of bulk density (tapped),Engrais — Détermination de la masse volumique après tassement,1983-02-01,2,['65.080'],ISO/TC 134,9599,,[11319],"['en','fr']",3,

11319,IS,,ISO 5311:1992,Fertilizers — Determination of bulk density (tapped),Engrais — Détermination de la masse volumique après tassement,1992-07-09,3,['65.080'],ISO/TC 134,9599,[11318],[92705],"['en','fr']",4,"<p>Specifies two methods for dry fertilizers only: the machine-tapping method and the hand-tapping method. Its principle is pouring the fertilizer from a specified funnel into a specified measuring cylinder of known volume, tapping the cylinder by means of a tapping machine or the walls of the cylinder by hand, and weighing the contents of the cylinder. If the fertilizer has absorbed moisture during transport or storage, it is necessary to dry it in an environmental chamber.</p>" 113

11320,IS,,ISO 5313:1986,"High nitrogen content, straight ammonium nitrate fertilizers — Determination or oil retention",Titre manque,1986-05-01,1,['65.080'],ISO/TC 134,9599,,[92713],"['en','fr']",2,"<p>The result of the method is a measure for the porosity of the material. The method is applicable to substances which do not contain materials soluble in gas oil and which are prilled or granular. It consists in total immersing of a test portion in gas oil for a specified period, followed by the draining away and the removal of surplus gas oil under specified conditions, and measuring of the increase in mass of the test portion.</p>"

11323,IS,,ISO 5316:1977,Fertilizers — Extraction of water-soluble phosphates,Engrais — Mise en solution des phosphates solubles dans l'eau,1977-08-01,1,['65.080'],ISO/TC 134,9599,,[67499],"['en','fr']",1,"<p>The method consists in dissolving in water of the phosphorus(V) oxide in a test portion by shaking, using a rotary shaker under specified conditions.</p>"

4603,IS,,ISO 532:1975,Acoustics — Method for calculating loudness level,Acoustique — Méthode de calcul du niveau d'isosonie,1975-07-01,1,['17.140.01'],ISO/TC 43,9599,,"[45100,63077]","['en','fr']",18,"<p>Specifies two methods for determining a single numerical value of a given sound, the first method is based on physical measurements, such as spectrum analyses in octave bands, the second method is based on spektrum analyses in one-third octave bands.</p>"

11327,IS,,ISO 5320:1980,Solid wood parquet — Classification of fir and spruce strips,Parquet en bois massif — Classification des lames en sapin et épicéa,1980-05-01,1,['79.080'],ISO/TC 218,9599,,[80116],"['en','fr']",4,"<p>Divides the blocks by quality into the three grades (+++), (++), and (+) corresponding to the conditions stated in the tables. Refers to a protection treatment to the parts of the strips liable to be attacked by insects. The regulations for manufacture, characteristics and delivery conditions are fixed by ISO 1027.</p>"

11329,IS,,ISO 5321:1978,Coniferous wood raw parquet blocks — General characteristics,Frises brutes en bois résineux pour parquets — Caractéristiques générales,1978-02-01,1,['79.080'],ISO/TC 218,9599,,[80113],"['en','fr']",3,"<p>Applies to blocks intended for the manufacture of strips for different types of parquet flooring. Specified are materials, design and manufacture, dimensions, squareness of ends, and permissible deviations, moisture, the methods of sampling and quality control, and delivery conditions, measurement and marking.</p>"

11331,IS,,ISO 5323:1984,Solid wood parquet and raw parquet blocks — Vocabulary,Parquet en bois et frises brutes à parquet — Vocabulaire,1984-12-01,1,"['79.080','01.040.79']",ISO/TC 218,9599,,[74838],"['en','fr','ru']",12,<p>Establishes terms and definitions for the purpose of expressing as correctly as possible concepts. These terms and definitions are not restrictive. Included are alphabetical indices in the three ISO languages.</p>

11340,IS,,ISO 5333:1978,Coniferous wood raw parquet blocks — Classification of fir and spruce parquet blocks,Frises brutes en bois résineux pour parquet — Classification des frises en sapin et épicéa,1978-05-01,1,['79.080'],ISO/TC 218,9599,,[80115],"['en','fr']",3,"<p>Divides the blocks by quality into the two grades I and II corresponding to the conditions stated in the tables. The regulations for manufacture, characteristics and delivery conditions are fixed by ISO 5321.</p>"

11341,IS,,ISO 5334:1978,Solid wood parquet — Classification of maritime pine strips,Parquet en bois massif — Classification des lames en pin maritime,1978-02-01,1,['79.080'],ISO/TC 218,9599,,[80116],"['en','fr']",4,"<p>Divides the non-assembled strips by quality into the three grade (+++), (++), and (+) corresponding to the conditions stated in the tables. The regulations for manufacture, characteristics and delivery conditions are fixed by ISO 1027.</p>"

4605,IS,,ISO 534:1980,Paper and board — Determination of the thickness of single sheets (and method of calculation of the apparent density of board),Papier et carton — Détermination de l'épaisseur des feuilles simples (et méthode de calcul de la masse volumique du carton),1980-10-01,1,['85.060'],ISO/TC 6/SC 2,9599,,[4606],"['en','fr']",4,

4606,IS,,ISO 534:1988,Paper and board — Determination of thickness and apparent bulk density or apparent sheet density,Papier et carton — Détermination de l'épaisseur et de la masse volumique des feuilles uniques ou des feuilles en liasses,1988-11-10,2,['85.060'],ISO/TC 6/SC 2,9599,"[4451,4605]",[36137],"['en','fr']",6,<p>Specifies two methods of measuring thickness and calculating the apparent bulk density or the apparent sheet density from the thickness determinations. These methods are not applicable to corrugated fibreboard..</p>

36137,IS,,ISO 534:2005,"Paper and board — Determination of thickness, density and specific volume","Papier et carton — Détermination de l'épaisseur, de la masse volumique et du volume spécifique",2005-02-04,3,['85.060'],ISO/TC 6/SC 2,9599,[4606],[53060],"['en','fr','ru']",13,"<p>ISO 534:2005 specifies two methods for measuring the thickness of paper and board:</p><p>a) the measurement of a single sheet of paper or board, as a single sheet thickness, </p><p>b) the measurement of a pack of sheets of paper as a bulking thickness.</p><p>It also specifies the following calculation methods, from the thickness determinations:</p><p>calculation methods for the apparent sheet density and for the appa

11343,IS,,ISO 5343:1983,Criteria for evaluating flexible rotor balance,Critères d'équilibrage pour les rotors flexibles,1983-10-01,1,['21.120.40'],ISO/TC 108,9599,,[19305],"['en','fr']",9,

11344,IS,,ISO 5344:1980,Electrodynamic test equipment for generating vibration — Methods of describing equipment characteristics,Moyens d'essais électrodynamiques utilisés pour la génération de vibrations — Méthodes de description des caractéristiques,1980-08-01,1,['17.160'],ISO/TC 108/SC 6,9599,,[1454],"['en','fr']",32,<p>Establishes a list and the standard method of obtaining certain properties. Provides three levels of description to be used. Gives for each of these levels a list of the properties to be specified by the manufacturer in his tender and in his literature.</p>

11345,IS,,ISO 5347-0:1987,Methods for the calibration of vibration and shock pick-ups — Part 0: Basic concepts,Méthodes pour l'étalonnage des capteurs de vibrations et de chocs — Partie 0: Concepts de base,1987-07-09,1,['17.160'],ISO/TC 108,9599,,[25043],"['en','fr']",13,

11346,IS,Cor,ISO 5347-0:1987/Cor 1:1990,Methods for the calibration of vibration and shock pick-ups — Part 0: Basic concepts — Technical Corrigendum 1,Méthodes pour l'étalonnage des capteurs de vibrations et de chocs — Partie 0: Concepts de base — Rectificatif technique 1,1990-09-06,1,['17.160'],ISO/TC 108,9599,,[25043],"['en','fr']",2,

22319,IS,Cor,ISO 5347-0:1987/Cor 2:1993,Methods for the calibration of vibration and shock pick-ups — Part 0: Basic concepts — Technical Corrigendum 2,Méthodes pour l'étalonnage des capteurs de vibrations et de chocs — Partie 0: Concepts de base — Rectificatif technique 2,1993-06-24,1,['17.160'],ISO/TC 108,9599,,[25043],"['en','fr']",1,

11347,IS,,ISO 5347-1:1993,Methods for the calibration of vibration and shock pick-ups — Part 1: Primary vibration calibration by laser interferometry,Méthodes pour l'étalonnage de capteurs de vibrations et de chocs — Partie 1: Étalonnage primaire de vibrations avec interféromètre de laser,1993-12-16,1,['17.160'],ISO/TC 108,9599,,[24951],"['en','fr']",12,

11356,IS,,ISO 5347-10:1993,Methods for the calibration of vibration and shock pick-ups — Part 10: Primary calibration by high impact shocks,Méthodes pour l'étalonnage de capteurs de vibrations et de chocs — Partie 10: Étalonnage primaire de chocs à impact élevé,1993-12-16,1,['17.160'],ISO/TC 108,9599,,"[24952,33587]","['en','fr']",8,"<p>Lays down detailed specifications for the instrumentation and procedure to be used for primary high impact shock calibration of accelerometers. Applies to rectilinear accelerometers, mainly of the piezoelectric and piezoresistive type, to primary standards and working accelerometers. Is applicable for a time range from 10 µs to 100 µs and a dynamic range from

11357,IS,,ISO 5347-11:1993,Methods for the calibration of vibration and shock pick-ups — Part 11: Testing of transverse vibration sensitivity,Méthodes pour l'étalonnage de capteurs de vibrations et de chocs — Partie 11: Essai de sensibilité aux vibrations transversales,1993-12-14,1,['17.160'],ISO/TC 108,9599,,[36407],"['en','fr']",2,<p>Lays down detailed specifications for the instrumentation and procedure to be used for transverse vibration sensitivity testing. Applies to rectilinear velocity and acceleration pick-ups. Is applicable for a frequency range from 20 Hz to 5000 Hz and a dynamic range from 10 m/s^2 to 1000 m/s^2 (frequency-dependent) and from 1 mm/s to 1 m/s (frequency-dependent)

11360,IS,,ISO 5347-14:1993,Methods for the calibration of vibration and shock pick-ups — Part 14: Resonance frequency testing of undamped accelerometers on a steel block,Méthodes pour l'étalonnage de capteurs de vibrations et de chocs — Partie 14: Essai de fréquence de résonance sur masse d'acier d'accéléromètres non amortis,1993-12-16,1,['17.160'],ISO/TC 108,9599,,[40382],"['en','fr']",2,"<p>Lays down detailed specifications for the instrumentation and procedure to be used for resonance frequency testing. It is a very limited method applicable exclusively to undamped accelerometers, mainly of the piezoelectric type, having a mass of less than 30 g. Is applicable for a frequency range from 1

11363,IS,,ISO 5347-17:1993,Methods for the calibration of vibration and shock pick-ups — Part 17: Testing of fixed temperature sensitivity,Méthodes pour l'étalonnage de capteurs de vibrations et de chocs — Partie 17: Essai de sensibilité de température fixe,1993-12-16,1,['17.160'],ISO/TC 108,9599,,[71259],"['en','fr']",2,"<p>Lays down detailed specifications for the instrumentation and procedure to be used for fixed temperature sensitivity testing. Applies to rectilinear pick-ups. Is applicable for the following parameters: frequency range: 20 Hz to 1250 Hz; dynamic range: 0,1 µm to 10 mm (frequency-dependent), 1 mm/s to 1 m/s (frequency-dependent), 10 m/s^2 to 1000 m/s^2 (frequency-dependen

11365,IS,,ISO 5347-19:1993,Methods for the calibration of vibration and shock pick-ups — Part 19: Testing of magnetic field sensitivity,Méthodes pour l'étalonnage de capteurs de vibrations et de chocs — Partie 19: Essai de sensibilité de champ magnétique,1993-12-16,1,['17.160'],ISO/TC 108,9599,,[57643],"['en','fr']",2,"<p>Lays down detailed specifications for the instrumentation and procedure to be used for magnetic field sensitivity testing. Applies to all kinds of pick-ups, whereby the pick-up output due to applied magnetic field is determined. Is applicable for a reference magnetic field of 10^-3 T r.m.s. at 50 Hz or 60 Hz.</p>"

11367,IS,,ISO 5347-20:1997,Methods for the calibration of vibration and shock pick-ups — Part 20: Primary vibration calibration by the reciprocity method,Méthodes d'étalonnage des capteurs de vibrations et de chocs — Partie 20: Étalonnage primaire de vibrations par méthode réciproque,1997-02-27,1,['17.160'],ISO/TC 108,9599,,[31366],"['en','fr']",11,<p>Describes the instrumentation and procedure to be used for the calibration of rectilinear accelerometers using the reciprocity method. Applicable to a frequency range from 40 Hz to 1 250 Hz and a dynamic range from 10 m/s^2 to 100 m/s^2 (frequency dependent).</p>

11349,IS,,ISO 5347-3:1993,Methods for the calibration of vibration and shock pick-ups — Part 3: Secondary vibration calibration,Méthodes pour l'étalonnage de capteurs de vibrations et de chocs — Partie 3: Étalonnage secondaire de vibrations,1993-12-16,1,['17.160'],ISO/TC 108,9599,,[27053],"['en','fr']",7,"<p>Lays down detailed specifications for the instrumentation and procedure to be used for secondary vibration calibration of rectilinear pick-ups and working pick-ups. Is applicable for the following parameters: frequency range - 20 Hz to 5000 Hz; dynamic range - 0,1 µm to 10 mm (frequency-dependent), 1 mm/s to 10 m/s (frequency-dependent), 10 m/s^2 to 1000 m/s^2 (frequency-dependent). The

11350,IS,,ISO 5347-4:1993,Methods for the calibration of vibration and shock pick-ups — Part 4: Secondary shock calibration,Méthodes pour l'étalonnage de capteurs de vibrations et de chocs — Partie 4: Étalonnage secondaire de chocs,1993-12-16,1,['17.160'],ISO/TC 108,9599,,[32051],"['en','fr']",6,"<p>Lays down detailed specifications for the instrumentation and procedure to be used for secondary shock calibration of accelerometers. Applies to rectilinear accelerometers of the strain gauge, piezoresistive and piezoelectric types and to secondary standard accelerometers. Is applicable for a time range from 0,1 ms to 10 ms and a dynamic range from 100 m/s^2 to 10^5 m/s^2. The limits of uncertain

11351,IS,,ISO 5347-5:1993,Methods for the calibration of vibration and shock pick-ups — Part 5: Calibration by Earth's gravitation,Méthodes pour l'étalonnage de capteurs de vibrations et de chocs — Partie 5: Étalonnage par gravitation tellurique,1993-12-16,1,['17.160'],ISO/TC 108,9599,,[57642],"['en','fr']",4,"<p>Lays down detailed specifications for the instrumentation and procedure to be used for primary calibration of accelerometers using Earth's gravitation. Applies to rectilinear accelerometers with zero-frequency response, mainly of the strain gauge or piezoresistive type, to servopick-ups, and to primary standard and working pick-ups. Is applicable for ± local Earth's gravitation at 0

11353,IS,,ISO 5347-7:1993,Methods for the calibration of vibration and shock pick-ups — Part 7: Primary calibration by centrifuge,Méthodes pour l'étalonnage de capteurs de vibrations et de chocs — Partie 7: Étalonnage primaire par centrifugeur,1993-12-16,1,['17.160'],ISO/TC 108,9599,,[65672],"['en','fr']",5,"<p>Lays down detailed specifications for the instrumentation and procedure to be used for primary calibration of accelerometers using centrifuge calibration. Applies to rectilinear accelerometers with zero-frequency response, mainly of the strain gauge or piezoresistive type, and to primary standard and working pick-ups. Is applicable for a calibration range from 10 m/s^2 to 1000 m/s^2 (

11368,IS,,ISO 5348:1987,Mechanical vibration and shock — Mechanical mounting of accelerometers,Vibrations et chocs mécaniques — Fixation mécanique des accéléromètres,1987-12-17,1,['17.160'],ISO/TC 108,9599,,[25068],['en'],7,

25068,IS,,ISO 5348:1998,Mechanical vibration and shock — Mechanical mounting of accelerometers,Vibrations et chocs mécaniques — Fixation mécanique des accéléromètres,1998-05-14,2,['17.160'],ISO/TC 108,9599,[11368],[78160],"['en','fr']",12,

11369,IS,,ISO 5349:1986,Mechanical vibration — Guidelines for the measurement and the assessment of human exposure to hand-transmitted vibration,Vibrations mécaniques — Principes directeurs pour le mesurage et l'évaluation de l'exposition des individus aux vibrations transmises par la main,1986-05-15,1,['13.160'],ISO/TC 108/SC 4,9599,,"[1337,32355]","['en','fr']",12,

4607,IS,,ISO 535:1976,Paper and board — Determination of water absorption — Cobb method,Papier et carton — Détermination de l'absorption d'eau — Méthode de Cobb,1976-05-01,1,['85.060'],ISO/TC 6/SC 2,9599,,[4608],"['en','fr']",3,

4608,IS,,ISO 535:1991,Paper and board — Determination of water absorptiveness — Cobb method,Papier et carton — Détermination de l'absorption d'eau — Méthode de Cobb,1991-07-11,2,['85.060'],ISO/TC 6/SC 2,9599,[4607],[61486],"['en','fr']",4,

61486,IS,,ISO 535:2014,Paper and board — Determination of water absorptiveness — Cobb method,Papier et carton — Détermination de l'absorption d'eau — Méthode de Cobb,2014-01-21,3,['85.060'],ISO/TC 6/SC 2,9599,[4608],[80320],"['en','fr','ru']",8,"<p>ISO 535:2014 specifies a method of determining the water absorptiveness of sized paper and board, including corrugated fibreboard, under standard conditions. It may not be suitable for paper of grammage less than 50 g/m² or embossed paper. It is not suitable for porous papers such as newsprint or unsized papers such as blotting paper or other papers having a relatively high water absorptiveness for which ISO 8787 is more suitable.</p><

11370,IS,,ISO 5350-1:1982,Pulps — Estimation of dirt and shives — Part 1: Unbleached chemical pulps,Pâtes — Estimation des impuretés et bûchettes — Partie 1: Pâtes écrues,1982-12-01,1,['85.040'],ISO/TC 6,9599,,[27887],"['en','fr']",5,

27887,IS,,ISO 5350-1:1998,Pulp — Estimation of dirt and shives — Part 1: Inspection of laboratory sheets,Pâtes — Estimation des impuretés et bûchettes — Partie 1: Examen des feuilles de laboratoire,1998-09-10,2,['85.040'],ISO/TC 6,9599,[11370],[39716],"['en','fr']",11,

32063,IS,Cor,ISO 5350-1:1998/Cor 1:1999,Pulp — Estimation of dirt and shives — Part 1: Inspection of laboratory sheets — Technical Corrigendum 1,Pâtes — Estimation des impuretés et bûchettes — Partie 1: Examen des feuilles de laboratoire — Rectificatif technique 1,1999-04-29,2,['85.040'],ISO/TC 6,9599,,[39716],"['en','fr']",1,

11371,IS,,ISO 5350-2:1990,Pulps — Estimation of dirt and shives — Part 2: Bleached pulp,Pâtes — Estimation des impuretés et bûchettes — Partie 2: Pâtes blanchies,1990-08-23,1,['85.040'],ISO/TC 6,9599,,[27888],"['en','fr']",3,

27888,IS,,ISO 5350-2:1998,Pulp — Estimation of dirt and shives — Part 2: Inspection of mill sheeted pulp,Pâtes — Estimation des impuretés et bûchettes — Partie 2: Examen des pâtes en feuilles,1998-09-10,2,['85.040'],ISO/TC 6,9599,[11371],[39717],"['en','fr']",9,

32065,IS,Cor,ISO 5350-2:1998/Cor 1:1999,Pulp — Estimation of dirt and shives — Part 2: Inspection of mill sheeted pulp — Technical Corrigendum 1,Pâtes — Estimation des impuretés et bûchettes — Partie 2: Examen des pâtes en feuilles — Rectificatif technique 1,1999-04-29,2,['85.040'],ISO/TC 6,9599,,[39717],"['en','fr']",1,

1673,IS,,ISO 5350-3:1997,Pulps — Estimation of dirt and shives — Part 3: Inspection by reflected light,Pâtes — Estimation des impuretés et bûchettes — Partie 3: Examen par lumière réfléchie,1997-12-25,1,['85.040'],ISO/TC 6,9599,,"[39993,37726]","['en','fr']",7,

11372,IS,,ISO 5351-1:1981,Cellulose in dilute solutions — Determination of limiting viscosity number — Part 1: Method in cupri-ethylene-diamine (CED) solution,Cellulose en solutions diluées — Détermination de l'indice de viscosité limite — Partie 1: Méthode utilisant une solution de cupri-éthylène-diamine (CED),1981-12-01,1,['85.040'],ISO/TC 6,9599,,[36605],"['en','fr']",11,"<p>Is applicable to CED-soluble samples of cellulose, e. g. in pulps and textiles. ISO 5351/2 specifies a method for the determination of the limiting viscosity number of cellulose in dilute iron(III) sodium tartrate complex (EWNNmod NaCl) solution.</p>"

36605,IS,,ISO 5351:2004,Pulps — Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution,Pâtes — Détermination de l'indice de viscosité limite en utilisant une solution de cupri-éthylènediamine (CED),2004-06-22,1,['85.040'],ISO/TC 6,9599,[11372],[51093],['en'],17,<p>ISO 5351:2004 specifies a method for the determination of the limiting viscosity number of pulp in a dilute cupri-ethylenediamine (CED) solution.</p><p>This method is primarily applicable to CED-soluble samples of bleached chemical pulps but can also be applied to any kind of pulp that dissolves completely in CED solution.</p>

11374,IS,,ISO 5353:1978,"Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point",Engins de terrassement et tracteurs et matériels agricoles et forestiers — Point repère du siège,1978-03-01,1,"['65.060','53.100']",ISO/TC 127/SC 2,9599,,[11375],"['en','fr']",7,

11376,IS,Amd,ISO 5353:1978/Amd 1:1981,"Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point — Amendment 1",Engins de terrassement et tracteurs et matériels agricoles et forestiers — Point repère du siège — Amendement 1,1981-05-01,1,"['65.060','53.100']",ISO/TC 127/SC 2,9599,,[11375],"['en','fr']",1,

11377,IS,Amd,ISO 5353:1978/Amd 2:1984,"Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point — Amendment 2",Engins de terrassement et tracteurs et matériels agricoles et forestiers — Point repère du siège — Amendement 2,1984-10-01,1,"['65.060','53.100']",ISO/TC 23/SC 3,9599,,[11375],"['en','fr']",1,

11378,IS,,ISO 5355:1982,Ski boots for adults — Interfaces for ski bindings for downhill skiing,Chaussures de ski pour adultes — Zones de jonction pour fixations de skis alpins,1982-12-01,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[11379],"['en','fr']",7,

11379,IS,,ISO 5355:1991,Alpine ski-boots — Safety requirements and test methods,Chaussures de ski pour skis alpins — Exigences de sécurité et essais,1991-05-23,2,['97.220.20'],ISO/TC 83/SC 4,9599,"[11378,12169]",[11380],"['en','fr']",19,

11380,IS,,ISO 5355:1997,Alpine ski-boots — Safety requirements and test methods,Chaussures de ski pour skis alpins — Exigences de sécurité et méthodes d'essai,1997-11-06,3,['97.220.20'],ISO/TC 83/SC 4,9599,[11379],[38623],"['en','fr']",25,

38623,IS,,ISO 5355:2005,Alpine ski-boots — Requirements and test methods,Chaussures de ski pour skis alpins — Exigences et méthodes d'essai,2005-06-27,4,['97.220.20'],ISO/TC 83/SC 4,9599,[11380],[74870],"['en','fr']",28,"<p>ISO 5355:2005 specifies the requirements, test methods and marking of ski-boots that are used with current systems of alpine ski-bindings with attachment at the boot toe and boot heel, the proper release function of which depends on the dimensions and design of the interfaces.</p><p>For ski-binding systems that function irrespective of the sole shape or that have different requirements for the sole dimensions, it is not always necessary for the ski-boot soles to comply wi

46348,IS,Cor,ISO 5355:2005/Cor 1:2007,Alpine ski-boots — Requirements and test methods — Technical Corrigendum 1,Chaussures de ski pour skis alpins — Exigences et méthodes d'essai — Rectificatif technique 1,2007-07-16,4,['97.220.20'],ISO/TC 83/SC 4,9599,,[74870],"['en','fr']",1,

11381,IS,,ISO 5356-1:1987,Anaesthetic and respiratory equipment — Conical connectors — Part 1: Cones and sockets,Matériel respiratoire et d'anesthésie — Raccords coniques — Partie 1: Raccords mâles et femelles,1987-06-25,1,['11.040.10'],ISO/TC 121/SC 1,9599,,[22102],['en'],16,

11382,IS,Amd,ISO 5356-1:1987/Amd 1:1993,Anaesthetic and respiratory equipment — Conical connectors — Part 1: Cones and sockets — Amendment 1,Matériel respiratoire et d'anesthésie — Raccords coniques — Partie 1: Raccords mâles et femelles — Amendement 1,1993-07-01,1,['11.040.10'],ISO/TC 121/SC 1,9599,,[22102],"['en','fr']",9,

22102,IS,,ISO 5356-1:1996,Anaesthetic and respiratory equipment — Conical connectors — Part 1: Cones and sockets,Matériel respiratoire et d'anesthésie — Raccords coniques — Partie 1: Raccords mâles et femelles,1996-12-19,2,['11.040.10'],ISO/TC 121/SC 1,9599,"[11381,11382]",[37081],"['en','fr']",15,<p>Specifies dimensional and gauging requirements for cones and sockets intended for connecting anaesthetic and respiratory equipment. Does not apply to medical equipment in general and accessories.</p>

37081,IS,,ISO 5356-1:2004,Anaesthetic and respiratory equipment — Conical connectors — Part 1: Cones and sockets,Matériel d'anesthésie et de réanimation respiratoire — Raccords coniques — Partie 1: Raccords mâles et femelles,2004-05-12,3,['11.040.10'],ISO/TC 121/SC 1,9599,[22102],[54851],"['en','fr','ru']",16,"<p>ISO 5356-1:2004 specifies dimensional and gauging requirements for cones and sockets intended for connecting anaesthetic and respiratory equipment, e.g. in breathing systems, anaesthetic-gas scavenging systems and vaporizers.</p><p>ISO 5356-1:2004 gives requirements for the following conical connectors:</p><ul><li>8,5 mm sizes intended for use in paediatric breathing systems;</li><l

11383,IS,,ISO 5356-2:1987,Anaesthetic and respiratory equipment — Conical connectors — Part 2: Screw-threaded weight-bearing connectors,Matériel respiratoire et d'anesthésie — Raccords coniques — Partie 2: Raccords à vis pouvant supporter un certain poids,1987-07-02,1,['11.040.10'],ISO/TC 121/SC 1,9599,,[43379],"['en','fr']",3,<p>This standard specifies and illustrates the basic requirements for screw-threaded weight-bearing connectors intended for use with anaesthesia apparatus and ventilators. Such connectors are intended for mounting heavy accessories. Definitions have been taken from ISO 4135.</p>

43379,IS,,ISO 5356-2:2006,Anaesthetic and respiratory equipment — Conical connectors — Part 2: Screw-threaded weight-bearing connectors,Matériel d'anesthésie et de réanimation respiratoire — Raccords coniques — Partie 2: Raccords à vis supportant un certain poids,2006-09-11,2,['11.040.10'],ISO/TC 121/SC 1,9599,[11383],[61446],"['en','fr','ru']",4,<p>ISO 5356-2:2006 specifies requirements for screw-threaded weight-bearing conical connectors intended for use with inhalation anaesthesia apparatus and ventilators; such connectors are intended for mounting heavy accessories.</p>

11384,IS,,ISO 5358:1980,Continuous flow inhalational anaesthetic apparatus (anaesthetic machines) for use with humans,Appareils d'anesthésie par inhalation à débit continu pour utilisation chez l'homme,1980-12-01,1,['11.040.10'],ISO/TC 121/SC 1,9599,,[11385],"['en','fr']",11,

11386,IS,,ISO 5359:1989,Low-pressure flexible connecting assemblies (hose assemblies) for use with medical gas systems,Flexibles basse pression (flexibles) utilisés dans les systèmes de gaz médicaux,1989-11-30,1,"['11.040.10','83.140.40']",ISO/TC 121/SC 1,9599,,[24835],"['en','fr']",41,

25635,IS,Cor,ISO 5359:1989/Cor 1:1995,Low-pressure flexible connecting assemblies (hose assemblies) for use with medical gas systems — Technical Corrigendum 1,Flexibles basse pression (flexibles) utilisés dans les systèmes de gaz médicaux — Rectificatif technique 1,1995-09-07,1,['11.040.10'],ISO/TC 121/SC 1,9599,,[24835],"['en','fr']",1,

24835,IS,,ISO 5359:2000,Low-pressure hose assemblies for use with medical gases,Flexibles basse pression utilisés dans les systèmes de gaz médicaux,2000-11-02,2,"['11.040.10','83.140.40']",ISO/TC 121/SC 1,9599,"[25635,11386]",[42763],['en'],25,

42763,IS,,ISO 5359:2008,Low-pressure hose assemblies for use with medical gases,Flexibles de raccordement à basse pression pour utilisation avec les gaz médicaux,2008-05-28,3,"['11.040.10','83.140.40']",ISO/TC 121/SC 1,9599,[24835],[59953],"['en','fr','ru']",28,"<p>ISO 5359:2008 specifies requirements for low-pressure hose assemblies intended for use with the following medical gases:</p><ul><li>oxygen;</li><li>nitrous oxide;</li><li>medical air;</li><li>helium;</li><li>carbon dioxide;</li><li>xenon;</li><li>specified mixtures of the gases listed above;</li><li>oxygen-enriched air;</li><li>air for driving surgical tools;</li><li>nitrogen for driving surgical tools;</li><li>vacuum.</li></ul><p

59802,IS,Amd,ISO 5359:2008/Amd 1:2011,Low-pressure hose assemblies for use with medical gases — Amendment 1,Flexibles de raccordement à basse pression pour utilisation avec les gaz médicaux — Amendement 1,2011-12-15,3,"['11.040.10','83.140.40']",ISO/TC 121/SC 1,9599,,[59953],"['en','fr']",1,

4609,IS,,ISO 536:1976,Paper and board — Determination of grammage,Papier et carton — Détermination du grammage,1976-06-01,1,['85.060'],ISO/TC 6/SC 2,9599,,[20674],"['en','fr']",3,

20674,IS,,ISO 536:1995,Paper and board — Determination of grammage,Papier et carton — Détermination du grammage,1995-08-24,2,['85.060'],ISO/TC 6/SC 2,9599,[4609],[60352],"['en','fr']",4,"<p>Specifies a method of determining the grammage of paper and board. Cancels and replaces the first edition, which has been technically revised.</p>"