Withdrawn and superseded ISO standards — page 13 of 246

18858,IS,,ISO 10791-2:2001,Test conditions for machining centres — Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis),Conditions d'essai des centres d'usinage — Partie 2: Essais géométriques des machines à broche verticale ou à têtes universelles à axe principal de rotation vertical (axe Z vertical),2001-03-15,1,['25.040.10'],ISO/TC 39/SC 2,9599,,[79156],"['en','fr']",41,

18861,IS,,ISO 10791-6:1998,"Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations","Conditions d'essai pour centres d'usinage — Partie 6: Précision des avances, vitesses et interpolations",1998-07-02,1,['25.040.10'],ISO/TC 39/SC 2,9599,,[46440],"['en','fr']",10,

40189,IS,Cor,ISO 10791-6:1998/Cor 1:2004,"Test conditions for machining centres — Part 6: Accuracy of feeds, speeds and interpolations — Technical Corrigendum 1","Conditions d'essai pour centres d'usinage — Partie 6: Précision des avances, vitesses et interpolations — Rectificatif technique 1",2004-03-31,1,['25.040.10'],ISO/TC 39/SC 2,9599,,[46440],"['en','fr']",1,

24692,IS,,ISO 10791-7:1998,Test conditions for machining centres — Part 7: Accuracy of a finished test piece,Conditions d'essai pour centres d'usinage — Partie 7: Précision d'une pièce d'essai usinée,1998-02-19,1,['25.040.10'],ISO/TC 39/SC 2,9599,,[54730],"['en','fr']",12,

54730,IS,,ISO 10791-7:2014,Test conditions for machining centres — Part 7: Accuracy of finished test pieces,Conditions d'essai pour centres d'usinage — Partie 7: Exactitude des pièces d'essai usinées,2014-11-20,2,['25.040.10'],ISO/TC 39/SC 2,9599,[24692],[73814],"['en','fr','ru']",24,"<p>ISO 10791-7:2014 specifies standard test pieces with reference to ISO 230-1, cutting tests under finishing conditions. It also specifies the characteristics and dimensions of the test pieces themselves. This part of ISO 10791 is intended to supply minimum requirements for assessing the cutting accuracy of the machine. This part of ISO 10791 takes into consideration 3- to 5-axis machining centres.</p>" 54731,

56084,IS,,ISO 10794:2011,"Space systems — Programme management — Material, mechanical parts and processes","Systèmes spatiaux — Management de programme — Matériaux, éléments mécaniques et procédés",2011-07-28,1,['49.140'],ISO/TC 20/SC 14,9599,,[72935],['en'],50,"<p>ISO 10794:2011 defines the programme management requirements for material, mechanical parts and processes for projects covering mission definition, design, development, production and operations of space systems, including disposal.</p><p>ISO 10794:2011 covers the following:</p><ul><li>management, including organization, reviews, acceptance status and documentation control;</li><li>selection criteria and rules;</li><li>evaluation,

46103,IS,,ISO 10795:2011,Space systems — Programme management and quality — Vocabulary,Systèmes spatiaux — Management de programme et qualité — Vocabulaire,2011-08-08,1,"['01.040.49','49.140']",ISO/TC 20/SC 14,9599,,[72936],['en'],37,"<p>ISO 10795:2011 provides definitions of all common terms used in the area of space systems and operations. ISO 10795:2011does not contain terms specific to an individual International Standard in the area of space systems and operations, which are defined in that particular International Standard.</p>"

32896,IS,,ISO 10799:2001,"Structural steels — Cold-formed, welded, structural hollow sections — Technical delivery requirements",Aciers de construction — Profils creux pour la construction soudés formés à froid — Conditions techniques de livraison,2001-02-22,1,['77.140.75'],ISO/TC 5/SC 1,9599,,[52311],"['en','fr']",24,

18864,IS,,ISO 10802:1992,Ductile iron pipelines — Hydrostatic testing after installation,Canalisations en fonte ductile — Essais hydrostatiques après pose,1992-12-17,1,['23.040.01'],ISO/TC 5/SC 2,9599,,[77320],"['en','fr']",4,<p>Specifies site hydrostatic acceptance tests for installed pressure and non-pressure pipelines used for conveying water and other liquids. Does not cover testing of pipelines for gas.</p>

1232,IS,,ISO 10803:1999,Design method for ductile iron pipes,Méthode de calcul des tuyaux en fonte ductile,1999-12-02,1,['23.040.10'],ISO/TC 5/SC 2,9599,,[50914],"['en','fr']",31,

50914,IS,,ISO 10803:2011,Design method for ductile iron pipes,Méthode de calcul des tuyaux en fonte ductile,2011-12-02,2,['23.040.10'],ISO/TC 5/SC 2,9599,[1232],[82597],['en'],60,"<p>ISO 10803:2011 specifies the design of ductile iron pipes used for conveying water, sewerage and other fluids, with or without internal pressure and with or without earth and traffic loading.</p>"

1394,IS,,ISO 10804-1:1996,Restrained joint systems for ductile iron pipelines — Part 1: Design rules and type testing,Assemblages verrouillés pour canalisations en fonte ductile — Partie 1: Règles de conception et essai de type,1996-12-26,1,['23.040.01'],ISO/TC 5/SC 2,9599,,[50105],"['en','fr']",4,"<p>Specifies design rules und type testing for joint systems to be used on ductile iron pipelines complying with ISO 2531 and ISO 7186, in order to determine their mechanical properties and leaktightness.</p>"

50105,IS,,ISO 10804:2010,Restrained joint systems for ductile iron pipelines — Design rules and type testing,Assemblages verrouillés pour canalisations en fonte ductile — Règles de conception et essais de type,2010-11-29,1,['23.040.01'],ISO/TC 5/SC 2,9599,[1394],[72575],"['en','fr']",4,"<p>ISO 10804:2010 specifies the design rules and type testing for restrained joint systems to be used on ductile iron pipelines complying with ISO 2531 and ISO 7186, in order to determine their mechanical properties and leak tightness.</p>"

1304,IS,,ISO 10806:1994,Pipework — Non-alloyed and stainless steel fittings for corrugated flexible metallic hoses,Tuyauteries — Raccords en acier non allié et acier inoxydable pour tuyauteries métalliques flexibles onduleuses,1994-08-04,1,['23.040.70'],ISO/TC 5/SC 11,9599,,[30177],"['en','fr']",22,<p>Specifies the design characteristics of non-alloyed and stainless steel fittings for corrugated flexible metallic hose in accordance with the requirements of ISO 10380. These fittings are suitable for the majority of applications. The characteristics of other types of fittings used will be the subject of an agreement between the purchaser and the manufacturer.</p>

5578,IS,,ISO 1081:1980,Drives using V-belts and grooved pulleys — Terminology,Transmissions par courroies trapézoïdales et poulies à gorges — Terminologie,1980-08-01,1,"['21.220.10','01.040.21']",ISO/TC 41,9599,,[5579],"['en','fr']",11,

5579,IS,,ISO 1081:1995,"Belt drives — V-belts and V-ribbed belts, and corresponding grooved pulleys — Vocabulary","Transmissions par courroies — Courroies trapézoïdales et striées, et poulies à gorges — Vocabulaire",1995-12-14,2,"['21.220.10','01.040.21']",ISO/TC 41/SC 1,9599,[5578],[59452],"['en','fr']",15,"<p>Defines terms relating to V-belt drives, V-belts and V-grooved pulleys, V-ribbed belt drives, V-ribbed belts and V-ribbed pulleys, as well as the corresponding symbols. Replaces the first edition, which has been technically revised.</p>"

46134,IS,,ISO 10810:2010,Surface chemical analysis — X-ray photoelectron spectroscopy — Guidelines for analysis,Analyse chimique des surfaces — Spectroscopie de photoélectrons par rayons X — Lignes directrices pour l'analyse,2010-11-16,1,['71.040.40'],ISO/TC 201/SC 7,9599,,[74286],"['en','fr']",27,<p>ISO 10810:2010 is intended to aid the operators of X‑ray photoelectron spectrometers in their analysis of typical samples. It takes the operator through the analysis from the handling of the sample and the calibration and setting-up of the spectrometer to the acquisition of wide and narrow scans and also gives advice on quantification and on preparation of the final report.</p>

40131,IS,,ISO 10813-1:2004,Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing,Générateurs de vibrations — Lignes directrices pour la sélection — Partie 1: Moyens pour les essais environnementaux,2004-07-16,1,['17.160'],ISO/TC 108/SC 6,9599,,[83116],['en'],25,"<p>ISO 10813-1:2004 gives guidance for the selection of vibration generating equipment used for vibration environmental testing, depending on the test requirements. </p><p>This guidance covers such aspects of selection as the equipment type, the model, and some main components, excluding the control system.</p>"

45410,IS,Cor,ISO 10813-1:2004/Cor 1:2006,Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing — Technical Corrigendum 1,Générateurs de vibrations — Lignes directrices pour la sélection — Partie 1: Moyens pour les essais environnementaux — Rectificatif technique 1,2006-12-14,1,['17.160'],ISO/TC 108/SC 6,9599,,[83116],['en'],4,

22733,IS,,ISO 10814:1996,Mechanical vibration — Susceptibility and sensitivity of machines to unbalance,Vibrations mécaniques — Susceptibilité et sensibilité des machines aux balourds,1996-09-12,1,['21.120.40'],ISO/TC 108/SC 2,9599,,[50431],"['en','fr']",11,<p>Gives methods for determining machine vibration sensitivity to unbalance and provides evaluation guidelines. Makes recommendations on how to apply the numerical sensitivity values in some particular cases.</p>

18865,IS,,ISO 10815:1996,Mechanical vibration — Measurement of vibration generated internally in railway tunnels by the passage of trains,Vibrations mécaniques — Mesurage des vibrations produites à l'intérieur des tunnels ferroviaires par le passage des trains,1996-11-14,1,"['93.060','17.160']",ISO/TC 108/SC 2,9599,,[70989],"['en','fr']",24,"<p>Establishes the basic principles for measuring, processing and evaluating vibration generated internally in railway tunnels by the passage of trains (e. g. speed of train, ist composition and axle load).</p>"

18866,IS,,ISO 10816-1:1995,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 1: General guidelines,Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les parties non tournantes — Partie 1: Lignes directrices générales,1995-12-14,1,['17.160'],ISO/TC 108/SC 2,9599,"[7213,7212,9593]",[63180],"['en','fr']",19,"<p>Establishes the general conditions and procedures for the measurement and evaluation of vibration, using measurements made on the non-rotating parts of machines. The general evalution criteria relate to both operational monotoring and acceptance testing and have been established primarily with regard to secu

52123,IS,Amd,ISO 10816-1:1995/Amd 1:2009,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 1: General guidelines — Amendment 1,Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les parties non tournantes — Partie 1: Lignes directrices générales — Amendement 1,2009-09-30,1,['17.160'],ISO/TC 108/SC 2,9599,,[63180],['en'],4,

1697,IS,,ISO 10816-2:1996,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Large land-based steam turbine generator sets in excess of 50 MW,"Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les parties non tournantes — Partie 2: Turboalternateurs installés sur fondation radier, excédant 50 MW",1996-02-15,1,"['17.160','29.160.40']",ISO/TC 108/SC 2,9599,,[28903],"['en','fr']",8,<p>Gives a specific guidance for assessing the vibration of stationary generator sets by measurements on the bearings of steam turbine generator sets. Applicable to generator sets exceeding 50 MW which are directly coupled to a gas tur

28903,IS,,ISO 10816-2:2001,"Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min","Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les parties non tournantes — Partie 2: Turbines à vapeur et alternateurs installés sur fondation radier, excédant 50 MW avec des vitesses normales de fonctionnement de 1500 r/min, 1800 r/min, 3000 r/min et 3600 r/min",2001-11-29,2,"['17.160','29.160.40']",ISO/TC 108/SC 2,9599,[1697],[51099],"['en','fr']",11,

40763,IS,Cor,ISO 10816-2:2001/Cor 1:2004,"Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min — Technical Corrigendum 1","Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les parties non tournantes — Partie 2: Turbines à vapeur et alternateurs installés sur fondation radier, excédant 50 MW avec des vitesses normales de fonctionnement de 1500 r/min, 1800 r/min, 3000 r/min et 3600 r/min — Rectificatif technique 1",2004-07-27,2,"['29.160.40','17.160']",ISO/TC 108/SC 2,9599,

51099,IS,,ISO 10816-2:2009,"Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min","Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les parties non tournantes — Partie 2: Turbines à vapeur et alternateurs pour applications terrestres, excédant 50 MW avec des vitesses normales de fonctionnement de 1 500 r/min, 1 800 r/min, 3 000 r/min et 3 600 r/min",2009-09-30,3,"['27.040','17.160','29.160.40']",ISO/TC 108/SC 2,9599,"[40763,28903]",[70047],"['en','fr']",14,"<p>ISO 108

60328,IS,,ISO 10816-21:2015,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 21: Horizontal axis wind turbines with gearbox,Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les parties non tournantes — Partie 21: Turbines éoliennes à axe horizontal avec multiplicateur,2015-04-29,1,['17.160'],ISO/TC 108/SC 2,9599,,[84280],"['en','fr']",15,<p>ISO 10816-21:2015 specifies the measurement and evaluation of mechanical vibration of wind turbines and their components by taking measurements on non-rotating parts. It applies to horizontal axis wind turbines with mechanical gearbox and rated generator output exceeding 20

1661,IS,,ISO 10816-3:1998,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ,"Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les parties non tournantes — Partie 3: Machines industrielles de puissance nominale supérieure à 15 kW et de vitesse nominale entre 120 r/min et 15 000 r/min, lorsqu'elles sont mesurées in situ",1998-05-14,1,"['21.020','17.160']",ISO/TC 108/SC 2,9599,,[50528],"['en','fr']",12,

50528,IS,,ISO 10816-3:2009,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ,"Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les parties non tournantes — Partie 3: Machines industrielles de puissance nominale supérieure à 15 kW et de vitesse nominale de fonctionnement entre 120 r/min et 15 000 r/min, lorsqu'elles sont mesurées in situ",2009-01-28,2,"['21.020','17.160']",ISO/TC 108/SC 2,9599,[1661],[78311],"['en','fr']",12,<p>ISO 10816-3:2009 gives criteria for assessing vibration m

71200,IS,Amd,ISO 10816-3:2009/Amd 1:2017,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ — Amendment 1,"Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les parties non tournantes — Partie 3: Machines industrielles de puissance nominale supérieure à 15 kW et de vitesse nominale de fonctionnement entre 120 r/min et 15 000 r/min, lorsqu'elles sont mesurées in situ — Amendement 1",2017-08-08,2,"['21.020','17.160']",ISO/TC 108/SC 2,9599,,[78311],"['en','fr']",4,

1625,IS,,ISO 10816-4:1998,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine driven sets excluding aircraft derivatives,"Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les parties non tournantes — Partie 4: Ensembles de turbines à gaz, à l'exception des turbines dérivées de celles utilisées en aéronautique",1998-07-02,1,"['27.040','17.160']",ISO/TC 108/SC 2,9599,,[40458],"['en','fr']",9,

40458,IS,,ISO 10816-4:2009,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine sets with fluid-film bearings,Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les parties non tournantes — Partie 4: Turbines à gaz à paliers à film fluide,2009-09-30,2,"['27.040','17.160']",ISO/TC 108/SC 2,9599,[1625],[74450],"['en','fr']",16,"<p>ISO 10816-4:2009 establishes specific provisions for evaluating the severity of <i>in-situ</i>, broad-band vibration measured radial (i.e. transverse)<b> </b>to the shaft axis on all main bearing housings or pedestals and in the axial direction on thrust bearings. These are in

71201,IS,Amd,ISO 10816-4:2009/Amd 1:2017,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine sets with fluid-film bearings — Amendment 1,Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les parties non tournantes — Partie 4: Turbines à gaz à paliers à film fluide — Amendement 1,2017-08-08,2,"['27.040','17.160']",ISO/TC 108/SC 2,9599,,[74450],"['en','fr']",4,

1589,IS,,ISO 10816-5:2000,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 5: Machine sets in hydraulic power generating and pumping plants,Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les parties non tournantes — Partie 5: Groupes générateurs de puissance et installations de pompage hydrauliques,2000-03-30,1,"['27.140','17.160']",ISO/TC 108/SC 2,9599,,[67919],['en'],19,

56782,IS,,ISO 10816-8:2014,Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 8: Reciprocating compressor systems,Vibrations mécaniques — Évaluation des vibrations des machines par mesurages sur les parties non tournantes — Partie 8: Systèmes de compresseurs alternatifs,2014-07-04,1,['17.160'],ISO/TC 108/SC 2,9599,,[75440],"['en','fr']",27,"<p>ISO 10816-8:2014 establishes procedures and guidelines for the measurement and classification of mechanical vibration of reciprocating compressor systems. The vibration values are defined primarily to classify the vibration of the compressor system and to avoid fatigue problems with parts in the reciproc

1418,IS,,ISO 10819:1996,Mechanical vibration and shock — Hand-arm vibration — Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand,Vibrations et chocs mécaniques — Vibrations main-bras — Méthode pour mesurer et évaluer le facteur de transmission des vibrations par les gants à la paume de la main,1996-05-30,1,"['13.340.40','13.160']",ISO/TC 108/SC 4,9599,,"[46313,37005]","['en','fr']",17,"<p>Specifies a method for the laboratory measurement, the data analysis and reporting of the vibration transmissibility of gloves in terms of vibration transmission from a handle to the palm of the hand in the frequency range from 31,5 Hz to 1250 Hz.</

5580,IS,,ISO 1082:1984,Mining — Shackle type connector units for chain conveyors,Exploitation minière — Étriers de raccordement pour chaînes de convoyeurs,1984-06-01,1,"['53.040.20','73.100.40']",ISO/TC 82,9599,,[5581],"['en','fr']",6,

1787,IS,,ISO 10823:1996,Guidance on the selection of roller chain drives,Méthode de sélection des transmissions par chaîne à rouleaux,1996-02-01,1,['21.220.30'],ISO/TC 100,9599,,[31532],"['en','fr']",11,"<p>Gives guidance on the selection of roller chain drives, composed of roller chain and sprockets conforming to ISO 606 for industrial applications. Does apply for roller chain drives operating under specified conditions with a life expectancy of approximately 15 000 h.</p>"

2042,IS,,ISO 10825:1995,Gears — Wear and damage to gear teeth — Terminology,Engrenages — Usure et défauts des dentures — Terminologie,1995-08-17,1,"['21.200','01.040.21']",ISO/TC 60/SC 1,9599,,"[70583,78719,78720]","['en','fr']",61,<p>Defines terms used to describe the appearance of the visible surfaces of tooth flanks or the damage that can be observed on gears. Causes and preventive measures are not discussed.</p>

5582,IS,,ISO 1083:1976,Spheroidal graphite or nodular graphite cast iron,Fonte à graphite sphéroïdal ou à graphite nodulaire,1976-11-01,1,['77.080.10'],ISO/TC 25,9599,,[5583],"['en','fr']",5,

5583,IS,,ISO 1083:1987,Spheroidal graphite cast iron — Classification,Fonte à graphite sphéroïdal — Classification,1987-10-01,2,['77.080.10'],ISO/TC 25,9599,[5582],[33243],"['en','fr']",13,"<p>This second edition cancels and replaces the first edition (ISO 1083:1976), in which only six grades of spheroidal graphite cast iron were defined. Defines nine grades of spheroidal graphite cast iron and their classification in two distinct categories (separately cast test samples and cast-on test samples, respectively). An annex gives a classification as a function of hardness.</p>"

33243,IS,,ISO 1083:2004,Spheroidal graphite cast irons - Classification,Fontes à graphite sphéroïdal — Classification,2004-07-16,3,['77.080.10'],ISO/TC 25,9599,[5583],[66643],"['en','fr']",31,"<p>ISO 1083:2004 defines the grades and the corresponding requirements for spheroidal graphite cast irons.</p><p>It specifies a classification based on mechanical properties measured on machined test pieces prepared either from:</p><ul><li>separately cast samples;</li><li>cast-on samples;</li><li>samples cut from a casting.</li></ul><p>ISO 1083:2004 also specifies a classification as a function of hardness.</p><p>It does not apply to spheroidal graphite cast iron used for pipes, fittings and accessorie

18868,IS,,ISO 10833:1992,Textile floor coverings — Determination of mechanical damage at a cut edge — Modified Vettermann drum tester method,Revêtements de sol textiles — Détermination de l'endommagement mécanique à l'endroit des joints — Méthode du tambour d'essai Vettermann modifié,1992-11-19,1,['97.150'],ISO/TC 219,9599,,[26833],"['en','fr']",4,"<p>The principle of the method is randomly rolling a metal ball with six rubber studs inside a rotating drum which is lined with the specimens. The specimens have an inclined longitudinal cut down the centre. After fatiguing, the mechanical damage of the cut edges is assessed.</p>"

26833,IS,,ISO 10833:2001,Textile floor coverings — Determination of resistance to damage at cut edges using the modified Vettermann drum test,Revêtements de sol textiles — Détermination de la résistance des joints par l'essai au tambour Vettermann modifié,2001-07-19,2,['97.150'],ISO/TC 219,9599,[18868],"[46244,61664]","['en','fr']",7,

61664,IS,,ISO 10833:2017,Textile floor coverings — Determination of resistance to damage at cut edges using the modified Vettermann drum test,Revêtements de sol textiles — Détermination de la résistance des joints par l'essai au tambour Vettermann modifié,2017-05-29,3,['97.150'],ISO/TC 219,9599,[26833],[86658],"['en','fr']",6,<p>ISO 10833:2017 specifies a method to determine the susceptibility of textile floor coverings to mechanical damage at cut edges.</p><p>It is applicable to all textile floor coverings both as sheet materials and as tiles.</p>

18870,IS,,ISO 10835:1995,Direct reduced iron — Sampling and sample preparation — Manual methods for reduced pellets and lump ores,Minerais de fer préréduits — Échantillonnage et préparation des échantillons — Méthodes manuelles pour granulés et morceaux de minerai réduits,1995-09-21,1,['73.060.10'],ISO/TC 102/SC 1,9599,,[34680],"['en','fr']",18,"<p>Deals with manual methods of increment sampling and sample preparation of direct reduced iron to obtain samples for size analysis, moisture determination and chemical analysis. Applicable to the taking of samples of direct reduced iron from conveyors, railway wagons or containers (including trucks) and stockpiles.</p>"

18872,IS,,ISO 10836:1994,Iron ores — Method of sampling and sample preparation for physical testing,Minerais de fer — Méthode d'échantillonnage et préparation des échantillons pour les essais physiques,1994-02-03,1,['73.060.10'],ISO/TC 102/SC 1,9599,,"[33354,43285]","['en','fr']",13,"<p>The testing covered refers to the physical test methods specified in the relevant international standards (ISO 3271, 3852, 4695, 4696, 4698, 4700, 7215, 7992). With respect to the bulk density test, only method 1 in ISO 3852, using a small container for iron ores having a nominal top size of 40 mm or smaller, falls within the scope.</p>"

18874,IS,,ISO 10838-1:2000,Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm,Raccords mécaniques pour systèmes de canalisation en polyéthylène destinée à la distribution de combustibles gazeux — Partie 1: Raccords métalliques pour tubes de diamètre extérieur nominal inférieur ou égal à 63 mm,2000-06-22,1,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,,[60932],"['en','fr']",12,

18875,IS,,ISO 10838-2:2000,Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 2: Metal fittings for pipes of nominal outside diameter greater than 63 mm,Raccords mécaniques pour systèmes de canalisation en polyéthylène destinée à la distribution de combustibles gazeux — Partie 2: Raccords métalliques pour tubes de diamètre extérieur nominal supérieur à 63 mm,2000-06-29,1,['75.200'],ISO/TC 138/SC 4,9599,,[60932],"['en','fr']",11,

32238,IS,,ISO 10838-3:2001,Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm,Raccords mécaniques pour systèmes de canalisation en polyéthylène destinée à la distribution de combustibles gazeux — Partie 3: Raccords thermoplastiques pour tubes de diamètre extérieur nominal inférieur ou égal à 63 mm,2001-03-29,1,"['75.200','83.140.30']",ISO/TC 138/SC 4,9599,,[60932],"['en','fr']",14,

5585,IS,,ISO 1084:1975,Industrial tractors — Definition and nominal rating,Tracteurs industriels — Définition et force nominale,1975-10-01,1,['53.060'],ISO/TC 110,9599,,[29703],"['en','fr']",1,

31268,IS,,ISO 10840:2003,Plastics — Guidance for the use of standard fire tests,Plastiques — Lignes directrices pour l'utilisation d'essais au feu normalisés,2003-03-12,1,"['83.080.01','13.220.40']",ISO/TC 61/SC 4,9599,"[18878,26541]",[41636],['en'],16,"<p>ISO 10840:2003 covers the following aspects of fire testing:</p><ul><li>selection of appropriate test(s);</li><li>listing of reaction-to-fire characteristics which the test(s) can measure;</li><li>assessment of the test(s) for their suitability for material characterization, quality control, pre-selection and/or end-product testing;</li><li>problems that can arise when plastics specimens are tested in standard fire tests.</li></ul><p>Parti

38258,IS,,ISO 10842:2006,Aircraft — Ground service connections — Locations and types,Aéronefs — Prises de service au sol — Emplacements et types,2006-10-13,1,['49.100'],ISO/TC 20/SC 9,9599,,[70680],"['en','fr']",10,"<p>ISO 10842:2006 specifies the locations and types of aircraft ground service connections in order to optimize ground services, both fixed and mobile, for the following seven services:</p><ul><li>400 Hz electrical power;</li><li>preconditioned air for cabin conditioning;</li><li>pneumatic power for jet engine start;</li><li>potable water;</li><li>lavatory service (draining, flushing);</li><li>aircraft refuelling;</li><li>interphone (headset) connections.</li></ul><p>It focuses o

1341,IS,,ISO 10844:1994,Acoustics — Specification of test tracks for the purpose of measuring noise emitted by road vehicles,Acoustique — Spécification des surfaces d'essai pour le mesurage du bruit émis par les véhicules routiers,1994-09-01,1,"['17.140.30','43.020']",ISO/TC 43/SC 1,9599,,"[30425,45358]","['en','fr']",18,"<p>Specifies the materials, design, construction and properties of a test surface in order to minimize intersite variation in vehicle noise measurements. Has been developed particularly for use with the ISO 362 and ISO 7188; can be used for vehicle noise testing generally where it is desirable to achieve a low level of tyre/road noise during the test. Does not take into acc

45358,IS,,ISO 10844:2011,Acoustics — Specification of test tracks for measuring noise emitted by road vehicles and their tyres,Acoustique — Spécification des surfaces d'essai pour le mesurage du bruit émis par les véhicules routiers et leurs pneumatiques,2011-01-31,2,"['17.140.30','43.020']",ISO/TC 43/SC 1,9599,[1341],[64218],"['en','fr','ru']",46,<p>ISO 10844:2011 specifies the essential characteristics of a test surface intended to be used for measuring vehicle and tyre/road noise emissions.</p><p>The surface design given in ISO 10844:2011: a) produces consistent levels of tyre/road sound emission under a wide range of operating conditions including those appropriate to vehicle sound testi

64218,IS,,ISO 10844:2014,Acoustics — Specification of test tracks for measuring noise emitted by road vehicles and their tyres,Acoustique — Spécification des surfaces d'essai pour le mesurage du bruit émis par les véhicules routiers et leurs pneumatiques,2014-05-12,3,"['17.140.30','43.020']",ISO/TC 43/SC 1,9599,[45358],[80557],"['en','fr','ru']",45,"<p>ISO 10844:2014 specifies the essential characteristics of a test surface intended to be used for measuring vehicle and tyre or road noise emissions. The surface design given in ISO 10844:2014</p><ul><li>produces consistent levels of tyre or road sound emission under a wide range of operating conditions including those appropriate to vehicle so

46190,IS,,ISO 10845-1:2010,"Construction procurement — Part 1: Processes, methods and procedures","Marchés de construction — Partie 1: Processus, méthodes et procédures",2010-06-28,1,['91.010.20'],ISO/TC 59/SC 18,9599,,[72467],['en'],112,"<p>ISO 10845-1:2010 describes processes, methods and procedures for the establishment within an organization of a procurement system that is fair, equitable, transparent, competitive and cost-effective. ISO 10845-1:2010</p><ol><li>describes generic procurement processes around which an employer can develop its procurement system,</li><li>establishes basic requirements for the conduct of an employer's employees, agents, board members and office bearers when

46191,IS,,ISO 10845-2:2011,Construction procurement — Part 2: Formatting and compilation of procurement documentation,Marchés de construction — Partie 2: Mise en forme et compilation de la documentation de marché,2011-01-13,1,['91.010.20'],ISO/TC 59/SC 18,9599,,[72234],['en'],41,"<p>ISO 10845-2:2011 establishes, in respect of supply, services and engineering and construction works contracts, at both main and subcontract level, a format for the compilation of calls for expressions of interest, tender and contract documents, and the general principles for compiling procurement documents.</p>"

46192,IS,,ISO 10845-3:2011,Construction procurement — Part 3: Standard conditions of tender,Marchés de construction — Partie 3: Conditions types normalisées des soumissions,2011-01-13,1,['91.010.20'],ISO/TC 59/SC 18,9599,,"[72468,81170]",['en'],59,"<p>ISO 10845-3:2011 sets out standard conditions of tender which</p><ul><li>bind the employer and tenderer to behave in a particular manner,</li><li>establish what a tenderer is required to do in order to submit a compliant tender,</li><li>make known the evaluation criteria to tenderers, and</li><li>establish the manner in which the employer conducts the process of offer and acceptance and provide the necessary feedback to tenderers on the outcome

46193,IS,,ISO 10845-4:2011,Construction procurement — Part 4: Standard conditions for the calling for expressions of interest,Marchés de construction — Partie 4: Conditions-types normalisées pour appel aux parties intéressées,2011-01-13,1,['91.010.20'],ISO/TC 59/SC 18,9599,,"[81171,72469]",['en'],20,"<p>ISO 10845-4:2011 sets out standard conditions for the calling for expressions of interest which</p><ul><li>bind the employer and respondent to behave in a particular manner,</li><li>establish what is required for a respondent to submit a compliant submission,</li><li>make known to respondents the evaluation criteria, and</li><li>establish the manner in which the employer conducts the process

1233,IS,,ISO 10846-1:1997,Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 1: Principles and guidelines,Acoustique et vibrations — Mesurage en laboratoire des propriétés de transfert vibro-acoustique des éléments élastiques — Partie 1: Principes et lignes directrices,1997-10-16,1,['17.140.01'],ISO/TC 43/SC 1,9599,,[38936],"['en','fr']",20,

22067,IS,,ISO 10846-2:1997,Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Dynamic stiffness of elastic supports for translatory motion — Direct method,Acoustique et vibrations — Mesurage en laboratoire des propriétés de transfert vibro-acoustique des éléments élastiques — Partie 2: Raideur dynamique en translation des supports élastiques — Méthode directe,1997-10-16,1,['17.140.01'],ISO/TC 43/SC 1,9599,,[38937],"['en','fr']",18,

38284,IS,,ISO 10848-1:2006,Acoustics — Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms — Part 1: Frame document,Acoustique — Mesurage en laboratoire des transmissions latérales du bruit aérien et des bruits de choc entre pièces adjacentes — Partie 1: Document cadre,2006-03-20,1,['91.120.20'],ISO/TC 43/SC 2,9599,,[67226],"['en','fr']",25,"<p>ISO 10848-1:2006 contains definitions, general requirements for test specimens and test rooms, and methods for measurement of the flanking transmission. Guidelines are given for the selection of the quantity to be measured depending on the junction and the types of building elements involved.</p>" 3

35004,IS,,ISO 10848-2:2006,Acoustics — Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms — Part 2: Application to light elements when the junction has a small influence,Acoustique — Mesurage en laboratoire des transmissions latérales du bruit aérien et des bruits de choc entre pièces adjacentes — Partie 2: Application aux éléments légers lorsque la jonction a une faible influence,2006-03-20,1,['91.120.20'],ISO/TC 43/SC 2,9599,"[3965,25041]",[67227],"['en','fr']",11,"<p>ISO 10848-2:2006 applies to light elements such as suspended ceilings, access floors, light uninterrupted façades or floating floors. The transmission from one room to ano

45625,IS,Cor,ISO 10848-2:2006/Cor 1:2007,Acoustics — Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms — Part 2: Application to light elements when the junction has a small influence — Technical Corrigendum 1,Acoustique — Mesurage en laboratoire des transmissions latérales du bruit aérien et des bruits de choc entre pièces adjacentes — Partie 2: Application aux éléments légers lorsque la jonction a une faible influence — Rectificatif technique 1,2007-01-29,1,['91.120.20'],ISO/TC 43/SC 2,9599,,[67227],"['en','fr']",1,

35003,IS,,ISO 10848-3:2006,Acoustics — Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms — Part 3: Application to light elements when the junction has a substantial influence,Acoustique — Mesurage en laboratoire des transmissions latérales du bruit aérien et des bruits de choc entre pièces adjacentes — Partie 3: Application aux éléments légers lorsque la jonction a une influence importante,2006-03-20,1,['91.120.20'],ISO/TC 43/SC 2,9599,,[67228],"['en','fr']",8,"<p>ISO 10848-3:2006 applies to structurally connected light elements forming a T or X junction. The performance of the building components is expressed either as an overall quanti

45360,IS,,ISO 10848-4:2010,Acoustics — Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms — Part 4: Application to junctions with at least one heavy element,Acoustique — Mesurage en laboratoire des transmissions latérales du bruit aérien et des bruits de choc entre pièces adjacentes — Partie 4: Application aux jonctions ayant au moins un élément lourd,2010-07-23,1,['91.120.20'],ISO/TC 43/SC 2,9599,,[67229],"['en','fr']",9,"<p>ISO 10848-4:2010 specifies laboratory measurements of normalized flanking level difference, normalized flanking impact sound pressure level or vibration reduction index of buildings where at least one of the elements

18881,IS,,ISO 10849:1996,Stationary source emissions — Determination of the mass concentration of nitrogen oxides — Performance characteristics of automated measuring systems,Émissions de sources fixes — Détermination de la concentration en masse des oxydes d'azote — Caractéristiques de performance des systèmes de mesurage automatiques,1996-04-04,1,['13.040.40'],ISO/TC 146/SC 1,9599,,"[79892,78185]",['en'],19,"<p>Specifies the fundamental structure and the most important performance characteristics of automated measuring systems for oxides of nitrogen to be used on stationary source emissions, for example combustion plants. The procedures to determine the performance characteristics are also

5586,IS,,ISO 1085:1974,Combinations of double-ended wrench gaps,Appariement des ouvertures de clés doubles de serrage,1974-11-01,1,['25.140.30'],ISO/TC 29,9599,,[5587],"['en','fr']",3,

5587,IS,,ISO 1085:1986,Assembly tools for screws and nuts — Double-ended wrenches — Size pairing,Outils de manoeuvre pour vis et écrous — Clés doubles de serrage — Appariement des ouvertures,1986-10-16,2,['25.140.30'],ISO/TC 29/SC 10,9599,[5586],[28548],"['en','fr']",2,

28548,IS,,ISO 1085:1999,Assembly tools for screws and nuts — Double-ended wrenches — Size pairing,Outils de manoeuvre pour vis et écrous — Clés doubles de serrage — Appariement des ouvertures,1999-09-30,3,['25.140.30'],ISO/TC 29/SC 10,9599,[5587],[67582],"['en','fr']",3,

46198,IS,,ISO 10855-1:2018,"Offshore containers and associated lifting sets — Part 1: Design, manufacture and marking of offshore containers","Conteneurs offshore et dispositifs de levage associés — Partie 1: Conception, fabrication et marquage des conteneurs offshore",2018-05-16,1,['75.180.10'],ISO/TC 67/SC 7,9599,,[84520],"['en','fr']",30,"<p>This document specifies requirements for the design, manufacture and marking of offshore containers with a maximum gross mass not exceeding 25 000 kg, intended for repeated use to, from and between offshore installations and ships.</p><p>This document specifies only transport-related requirements.</p>"

65181,IS,,ISO 10855-2:2018,"Offshore containers and associated lifting sets — Part 2: Design, manufacture and marking of lifting sets","Conteneurs offshore et dispositifs de levage associés — Partie 2: Conception, fabrication et marquage des dispositifs de levage associés",2018-05-16,1,['75.180.10'],ISO/TC 67/SC 7,9599,,[84521],"['en','fr']",14,"<p>This document specifies requirements for lifting sets for use with containers in offshore service, including technical requirements, marking and statements of conformity for single and multi-leg slings, including chain slings and wire rope slings.</p>"

65183,IS,,ISO 10855-3:2018,"Offshore containers and associated lifting sets — Part 3: Periodic inspection, examination and testing","Containeurs offshore et dispositifs de levage associés — Partie 3: Contrôle périodique, inspection et essais",2018-05-16,1,['75.180.10'],ISO/TC 67/SC 7,9599,,[84522],"['en','fr']",17,"<p>This document specifies requirements for the periodic inspection, examination and testing of offshore freight and service containers, built in accordance with ISO 10855‑1, with maximum a gross mass not exceeding 25 000 kg and their associated lifting sets, intended for repeated use to, from and between offshore installations and ships. Inspection requirements following damage a

5588,IS,,ISO 1086:1975,Documentation — Title-leaves of a book,Documentation — Feuillets de titre d'un livre,1975-08-01,1,['01.140.40'],ISO/TC 46/SC 9,9599,,[5589],"['en','fr']",2,

54053,IS,,ISO 10863:2011,Non-destructive testing of welds — Ultrasonic testing — Use of time-of-flight diffraction technique (TOFD),Contrôle non destructif des assemblages soudés — Contrôle par ultrasons — Utilisation de la technique de diffraction des temps de vol (méthode TOFD),2011-08-22,1,['25.160.40'],ISO/TC 44/SC 5,9599,,[75443],"['en','fr','ru']",30,"<p>ISO 10863:2011 specifies the application of the time-of-flight diffraction (TOFD) technique to the semi- or fully automated ultrasonic testing of fusion-welded joints in metallic materials of minimum thickness 6 mm. It applies to full penetration welded joints of simple geometry in plates, pipes, and vessels, where both the weld and pa

20057,IS,,ISO 1087-1:2000,Terminology work — Vocabulary — Part 1: Theory and application,Travaux terminologiques — Vocabulaire — Partie 1: Théorie et application,2000-10-26,1,"['01.020','01.040.01']",ISO/TC 37/SC 1,9599,[5591],"[44300,62330]","['en','fr']",41,

5591,IS,,ISO 1087:1990,Terminology — Vocabulary,Terminologie — Vocabulaire,1990-04-26,1,"['01.020','01.040.01']",ISO/TC 37,9599,,"[32819,20057]","['en','fr']",17,

46253,IS,,ISO 10872:2010,"Water quality — Determination of the toxic effect of sediment and soil samples on growth, fertility and reproduction of Caenorhabditis elegans (Nematoda)","Qualité de l'eau — Détermination de l'effet toxique d'échantillons de sédiment et de sol sur la croissance, la fertilité et la reproduction de Caenorhabditis elegans (nématodes)",2010-05-31,1,['13.060.70'],ISO/TC 147/SC 5,9599,,[71352],"['en','fr']",17,"<p>ISO 10872:2010 specifies a method for determining the toxicity of environmental samples on growth, fertility and reproduction of <i>Caenorhabditis elegans</i>. The method applies to contaminated whole fresh-water sediment (maximum salinity, 5 ‰), soil and waste

46254,IS,,ISO 10873:2010,Dentistry — Denture adhesives,Médecine bucco-dentaire — Adhésifs pour prothèses dentaires,2010-09-03,1,['97.170'],ISO/TC 106/SC 7,9599,,[72380],"['en','fr']",15,"<p>ISO 10873:2010 classifies denture adhesives used by wearers of removable dentures; it also specifies requirements, test methods and instructions to be supplied for the use of such products. </p><p>ISO 10873:2010 is applicable to denture adhesives for use by the public and excludes the dental lining materials prescribed or applied by dental professionals.</p><p>ISO 10873:2010 does not specify qualitative or quantitative requirements for freedom from biological hazards. For assessing possible biological haz

72380,IS,,ISO 10873:2021,Dentistry — Denture adhesives,Médecine bucco-dentaire — Adhésifs pour prothèses dentaires,2021-07-01,2,['97.170'],ISO/TC 106/SC 7,9599,[46254],[88004],"['en','fr']",18,"<p>This document classifies denture adhesives used by wearers of removable dentures; it also specifies requirements, test methods and instructions to be supplied for the use of such products.</p><p>This document is applicable to denture adhesives for use by the consumer and excludes the dental lining materials prescribed or applied by dental professionals.</p>"

5592,IS,,ISO 1088:1973,Liquid flow measurement in open channels — Velocity-area methods — Collection of data for determination of errors in measurement,Mesure de débit des liquides dans les canaux découverts — Méthodes d'exploration du champ des vitesses — Recueil des données pour la détermination des erreurs,1973-06-01,1,['17.120.20'],ISO/TC 113,9599,,[5593],"['en','fr']",13,

5593,IS,,ISO 1088:1985,Liquid flow measurement in open channels — Velocity-area methods — Collection and processing of data for determination of errors in measurement,Mesure de débit des liquides dans les canaux découverts — Méthodes d'exploration du champ des vitesses — Recueil et traitement des données pour la détermination des erreurs de mesurage,1985-01-17,2,['17.120.20'],ISO/TC 113/SC 5,9599,[5592],[37096],"['en','fr']",21,"<p>For determining the discharge in open channels by the velocity-area method, components of the flow need to be measured. The total uncertainty in discharge is a combination of the uncertainties in these components. This ISO-Standard specifies a standard basis for c

26143,IS,,ISO 10882-1:2001,Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airborne particles,Hygiène et sécurité en soudage et techniques connexes — Échantillonnage de particules en suspension et gaz dans la zone respiratoire des opérateurs — Partie 1: Échantillonnage des particules en suspension,2001-02-15,1,"['13.100','25.160.01']",ISO/TC 44/SC 9,9599,,[43385],"['en','fr']",29,

43385,IS,,ISO 10882-1:2011,Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airborne particles,Hygiène et sécurité en soudage et techniques connexes — Échantillonnage des particules en suspension et des gaz dans la zone respiratoire des opérateurs — Partie 1: Échantillonnage des particules en suspension,2011-09-26,2,"['13.100','25.160.01']",ISO/TC 44/SC 9,9599,[26143],[83428],"['en','fr']",35,"<p>ISO 10882-1:2011 specifies a procedure for sampling airborne particles in the breathing zone of a person who performs welding and allied processes (the operator). It also provides details of relevant s

26144,IS,,ISO 10882-2:2000,Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 2: Sampling of gases,Hygiène et sécurité en soudage et techniques connexes — Échantillonnage de particules en suspension et gaz dans la zone respiratoire des opérateurs — Partie 2: Échantillonnage des gaz,2000-10-12,1,"['13.100','25.160.01']",ISO/TC 44/SC 9,9599,,[83429],"['en','fr']",21,"<p>This part of EN ISO 10882 provides guidance for the determination of personal exposure to gases and vapours in</p><p>welding and allied processes. It applies to the following thermal processes used to join, cut, surface or remove</p><p>metals:</p

18896,IS,,ISO 10884:1995,Manually portable brush-cutters and grass-trimmers with internal combustion engine — Determination of sound power levels — Engineering method (Grade 2),Débroussailleuses et coupe-herbe portatifs à moteur à combustion interne — Détermination des niveaux de puissance acoustique — Méthode d'expertise (classe 2),1995-09-21,1,"['65.060.80','17.140.20']",ISO/TC 23/SC 17,9599,,[35167],"['en','fr']",8,<p>Establishes methods for the determination and verification of sound power levels of manually portable hand-held brush-cutters and grass-trimmers with internal combustion engines which are carried out under standardized conditions. These units are primarily used in forestry.<

2747,IS,,ISO 10889-1:1997,"Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions","Porte-outil à queue cylindrique — Partie 1: Queue cylindrique, alésage de réception — Conditions techniques de livraison",1997-12-25,1,['25.060.20'],ISO/TC 29,9599,,[38550],"['en','fr']",8,

2743,IS,,ISO 10889-2:1997,"Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs",Porte-outil à queue cylindrique — Partie 2: Porte-outil de type A de conceptions spéciales,1997-12-25,1,['25.060.20'],ISO/TC 29,9599,,[38551],"['en','fr']",3,

38551,IS,,ISO 10889-2:2004,"Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs",Porte-outil à queue cylindrique — Partie 2: Porte-outil de type A de conceptions spéciales,2004-11-18,2,['25.060.20'],ISO/TC 29,9599,[2743],[68866],"['en','fr']",3,"<p>ISO 10889-2:2004 specifies dimensions, designations and complementary technical delivery conditions for tool holders of type A with cylindrical shank in accordance with ISO 10889-1 for tool holders of special designs. It is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines.</p>"

2741,IS,,ISO 10889-3:1997,Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat,Porte-outil à queue cylindrique — Partie 3: Porte-outil radial de type B,1997-12-25,1,['25.060.20'],ISO/TC 29,9599,,[38552],"['en','fr']",9,

38552,IS,,ISO 10889-3:2004,Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat,Porte-outil à queue cylindrique — Partie 3: Porte-outil radial de type B,2004-11-18,2,['25.060.20'],ISO/TC 29,9599,[2741],[68867],"['en','fr']",10,"<p>ISO 10889-3:2004 specifies dimensions, designations and complementary technical delivery conditions for tool holders with a rectangular radial seat of types B1 to B8 with cylindrical shank in accordance with ISO 10889-1. It is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines.</p>"

2708,IS,,ISO 10889-4:1997,Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat,Porte-outil à queue cylindrique — Partie 4: Porte-outil axial de type C,1997-12-25,1,['25.060.20'],ISO/TC 29,9599,,[38553],"['en','fr']",7,

38553,IS,,ISO 10889-4:2004,Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat,Porte-outil à queue cylindrique — Partie 4: Porte-outil axial de type C,2004-11-18,2,['25.060.20'],ISO/TC 29,9599,[2708],[68868],"['en','fr']",7,"<p>ISO 10889-4:2004 specifies dimensions, designations and complementary technical delivery conditions for tool holders with a rectangular axial seat of types C1 to C4 with cylindrical shank in accordance with ISO 10889-1. It is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines.</p>"

2717,IS,,ISO 10889-5:1997,Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat,Porte-outil à queue cylindrique — Partie 5: Porte-outil de type D comportant plusieurs logements,1997-12-25,1,['25.060.20'],ISO/TC 29,9599,,[64171],"['en','fr']",4,

2699,IS,,ISO 10889-6:1997,Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat,Porte-outil à queue cylindrique — Partie 6: Porte-outil de type E pour outils à queue cylindrique,1997-12-25,1,['25.060.20'],ISO/TC 29,9599,,[38554],"['en','fr']",9,

38554,IS,,ISO 10889-6:2004,Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat,Porte-outil à queue cylindrique — Partie 6: Porte-outil de type E pour outils à queue cylindrique,2004-11-18,2,['25.060.20'],ISO/TC 29,9599,[2699],[68869],"['en','fr']",9,"<p>ISO 10889-6:2004 specifies dimensions, designations and complementary technical delivery conditions for tool holders with cylindrical seat of types E1 to E4 with a mounting system cylindrical shank in accordance with ISO 10889-1. It applies to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines.</p>"

21890,IS,,ISO 10889-7:1997,Tool holders with cylindrical shank — Part 7: Type F with taper seat,Porte-outil à queue cylindrique — Partie 7: Porte-outil de type F pour outils à queue conique,1997-12-25,1,['25.060.20'],ISO/TC 29,9599,,[38555],"['en','fr']",4,

38555,IS,,ISO 10889-7:2004,Tool holders with cylindrical shank — Part 7: Type F with taper seat,Porte-outil à queue cylindrique — Partie 7: Porte-outil de type F pour outils à queue conique,2004-11-18,2,['25.060.20'],ISO/TC 29,9599,[21890],[68870],"['en','fr']",4,"<p>ISO 10889-7:2004 specifies dimensions, designations and complementary technical delivery conditions for tool holders with taper seat of type F and with a cylindrical shank mounting system in accordance with ISO 10889-1. It is applicable to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines.</p>"