Withdrawn and superseded ISO standards — page 12 of 246

37186,IS,,ISO 10625:2005,Equipment for crop protection — Sprayer nozzles — Colour coding for identification,Matériel de protection des cultures — Buses de pulvérisation — Code de couleur pour l'identification,2005-07-22,2,"['01.070','65.060.40']",ISO/TC 23/SC 6,9599,"[18717,30357]",[70624],"['en','fr']",4,"<p>ISO 10625:2005 specifies the system of colour coding for identification of all types of hydraulic spray nozzles, such as flat and cone nozzles used for the application of crop protection products in agriculture. It is not applicable to nozzles where there is more than one component influencing flow rate, and might not be applicable to liquid fertiliser applications. It allows for flow r

18721,IS,,ISO 10628:1997,Flow diagrams for process plants — General rules,Schémas de procédé pour les unités de fabrication/de production — Règles générales,1997-04-10,1,['01.080.30'],ISO/TC 10/SC 10,9599,,"[39724,51840,51841]","['en','fr']",59,

18724,IS,,ISO 10631:1994,Metallic butterfly valves for general purposes,Robinets métalliques à papillon d'usage général,1994-04-21,1,['23.060.99'],ISO/TC 153,9599,,[55648],"['en','fr']",11,"<p>Specifies the requirements for metallic butterfly valves with centred or eccentric disc, with centred or eccentric shaft, with metallic, polymeric, elastomeric or composite seating, with lined or unlined body, coated or uncoated, to be used in flanged or butt-welded piping systems for shut-off, throttling or flow control. Covers butterfly valves with nominal diameters DN 40 to DN 2000 and is applicable to valves of nominal pressure PN 2,5 to 50.</p>"

55648,IS,,ISO 10631:2013,Metallic butterfly valves for general purposes,Robinets métalliques à papillon d'usage général,2013-08-26,2,['23.060.99'],ISO/TC 153,9599,[18724],[78331],"['en','fr']",15,"<p>ISO 10631:2013 specifies requirements for design, materials (e.g. steel, cast iron, ductile iron, copper alloy), pressure/temperature ratings, and testing for butterfly valves having metallic bodies for use in general purpose flanged or butt welding piping systems.</p><p>ISO 10631:2013 covers butterfly valves of the following nominal sizes, DN and NPS:</p><ul><li>DN 40; 50; 65; 80; 100; 125; 150; 200; 250; 300; 350; 400; 450; 500 (550); 600 (650); 700; 750; 800; 900; 1 000; 1 200; 1 400; 1 600;

18728,IS,,ISO 10634:1995,Water quality — Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium,Qualité de l'eau — Lignes directrices pour la préparation et le traitement des composés organiques peu solubles dans l'eau en vue de l'évaluation de leur biodégradabilité en milieu aqueux,1995-08-17,1,['13.060.70'],ISO/TC 147/SC 5,9599,,[69573],"['en','fr']",7,"<p>Restricted to the description of the four techniques for introducing the poorly-soluble organic test compounds for a subsequent test on biodegradability in an aqueous medium. The techniques are: direct addition, which is restricted

18731,IS,,ISO 10637:1999,Dental equipment — High- and medium-volume suction systems,Matériel dentaire — Systèmes d'aspiration à haut et moyen volume,1999-08-26,1,['11.060.20'],ISO/TC 106/SC 6,9599,,[68461],"['en','fr']",18,

46023,IS,,ISO 10638:2010,Rubber — Identification of antidegradants by gas chromatography/mass spectrometry,Caoutchouc — Identification des antidégradants par chromatographie en phase gazeuse/spectrométrie de masse,2010-06-16,1,"['83.040.10','83.040.20']",ISO/TC 45/SC 2,9599,,[70336],"['en','ru']",43,"<p>ISO 10638:2010 specifies a qualitative method, using gas chromatography/mass spectrometry, for the identification of antidegradants in raw rubbers, latices, unvulcanized-rubber compounds and vulcanized-rubber products. It is applicable to 31 types of antidegradant. Users should note that the method specified is a qualitative one and is not intended for quantitative analysis.</p>"

33531,IS,,ISO 10639:2004,Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin,Systèmes de canalisation en matières plastiques pour l'alimentation en eau avec ou sans pression — Systèmes en plastiques thermodurcissables renforcés de verre (PRV) à base de résine de polyester non saturé (UP),2004-01-13,1,"['93.025','23.040.20','91.140.60']",ISO/TC 138/SC 6,9599,,[65187],['en'],72,"<p>ISO 10639:2004 specifies the properties of piping system components made from glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) for water supply with or without press

52272,IS,Amd,ISO 10639:2004/Amd 1:2011,Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Amendment 1,Systèmes de canalisation en matières plastiques pour l'alimentation en eau avec ou sans pression — Systèmes en plastiques thermodurcissables renforcés de verre (PRV) à base de résine de polyester non saturé (UP) — Amendement 1,2011-02-17,1,"['93.025','23.040.20','91.140.60']",ISO/TC 138/SC 6,9599,,[65187],['en'],4,

65187,IS,,ISO 10639:2017,Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin,Systèmes de canalisation en matières plastiques pour l'alimentation en eau avec ou sans pression — Systèmes en plastiques thermodurcissables renforcés de verre (PRV) à base de résine de polyester non saturé (UP),2017-10-12,2,"['93.025','23.040.20','91.140.60']",ISO/TC 138/SC 6,9599,"[33531,52272]",[77173],['en'],57,"<p>ISO 10639:2017 specifies the properties of piping system components made from glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). It is suited for all t

18737,IS,,ISO 10642:1997,Hexagon socket countersunk head screws,Vis à tête fraisée à six pans creux,1997-11-06,1,['21.060.10'],ISO/TC 2,9599,,[34454],"['en','fr']",9,

34454,IS,,ISO 10642:2004,Hexagon socket countersunk head screws,Vis à tête fraisée à six pans creux,2004-02-27,2,['21.060.10'],ISO/TC 2/SC 11,9599,[18737],"[66029,72578]","['en','fr']",7,"<p>ISO 10642:2004 specifies the characteristics of hexagon socket countersunk head screws with threads from M3 up to and including M20, with product grade A and property classes 8.8, 10.9 and 12.9.</p>"

61325,IS,Amd,ISO 10642:2004/Amd 1:2012,Hexagon socket countersunk head screws — Amendment 1,Vis à tête fraisée à six pans creux — Amendement 1,2012-06-27,2,['21.060.10'],ISO/TC 2/SC 11,9599,,"[66029,72578]","['en','fr']",1,

72578,IS,,ISO 10642:2019,Fasteners — Hexagon socket countersunk head screws with reduced loadability,Fixations — Vis à tête fraisée à six pans creux à capacité de charge réduite,2019-09-18,3,['21.060.10'],ISO/TC 2/SC 11,9599,"[34454,61325]",[90795],"['en','fr']",11,"<p>This document specifies the characteristics of hexagon socket countersunk head screws with reduced loadability due to head design, in steel and stainless steel, with metric coarse pitch threads M2 to M20, and with product grade A.</p><p>NOTE 1 Other dimensional options are given in ISO 888, ISO 965-1 and ISO 4753.</p><p>NOTE 2 The reduced loadability (related to the countersunk head dimensions in combination with penetra

18739,IS,,ISO 10644:1998,Screw and washer assemblies with plain washers — Washer hardness classes 200 HV and 300 HV,Vis à rondelle plate incorporée — Rondelles de classes de dureté 200 HV et 300 HV,1998-07-30,1,['21.060.30'],ISO/TC 2/SC 11,9599,,[44116],"['en','fr']",7,

18740,IS,,ISO 10645:1992,Nuclear energy — Light water reactors — Calculation of the decay heat power in nuclear fuels,Énergie nucléaire — Réacteurs à eau légère — Calcul de la puissance résiduelle des combustibles nucléaires,1992-03-05,1,['27.120.10'],ISO/TC 85/SC 6,9599,,"[61636,76532]","['en','fr']",12,<p>Provides the basis for calculating the decay heat power of non-recycled nuclear fuel considering: the contribution of the fission products from nuclear fission; the contribution of the actinides; the contribution of isotopes resulting from neutron capture in fission products.</p>

51320,IS,,ISO 10649-1:2010,Cutter arbors with parallel key and tenon drive — Part 1: General dimensions,Mandrins porte-fraise à entraînement par clavette et tenon — Partie 1: Dimensions générales,2010-07-21,1,['25.060.20'],ISO/TC 29,9599,,[60703],"['en','fr']",2,<p>ISO 10649-1:2010 specifies the dimensions of tool interface for cutter arbors with parallel key and tenon drive.</p>

51321,IS,,ISO 10649-2:2010,Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface,Mandrins porte-fraise à entraînement par clavette et tenon — Partie 2: Dimensions et désignation des porte-outils avec interface à cône creux-face,2010-07-21,1,['25.060.20'],ISO/TC 29,9599,,[60704],"['en','fr']",3,<p>ISO 10649-2:2010 specifies the dimensions of cutter arbors with parallel key and tenon drive with hollow taper interface (HSK) with flange contact surface.</p>

46029,IS,,ISO 10649-3:2010,Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers,Mandrins porte-fraise à entraînement par clavette et tenon — Partie 3: Dimensions et désignation des porte-outils à conicité 7/24 pour changement automatique d'outils,2010-07-21,1,['25.060.20'],ISO/TC 29,9599,,[60705],"['en','fr']",4,<p>ISO 10649-3:2010 specifies the dimensions of cutter arbors with parallel key and tenon drive with 7/24 tapers for automatic tool changer.</p>

46030,IS,,ISO 10649-4:2010,Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers,Mandrins porte-fraise à entraînement par clavette et tenon — Partie 4: Dimensions et désignation des porte-outils à conicité 7/24 sans changement automatique d'outils,2010-07-21,1,['25.060.20'],ISO/TC 29,9599,,[60706],"['en','fr']",3,<p>ISO 10649-4:2010 specifies the dimensions of cutter arbors with parallel key and tenon drive with 7/24 tapers without automatic<i> </i>tool changers.</p>

5557,IS,,ISO 1065:1975,Non-ionic surface active agents obtained from ethylene oxide — Determination of cloud temperature (cloud point),Agents de surface non ioniques obtenus à partir de l'oxyde d'éthylène — Détermination de la température de trouble (point de trouble),1975-12-01,1,['71.100.40'],ISO/TC 91,9599,,[5558],"['en','fr']",4,

38399,IS,,ISO 10650-1:2004,Dentistry — Powered polymerization activators — Part 1: Quartz tungsten halogen lamps,Art dentaire — Activateurs électriques de polymérisation — Partie 1: Lampes halogènes au tungstène à quartz,2004-10-27,1,['11.060.20'],ISO/TC 106/SC 6,9599,[32180],[63424],"['en','fr']",20,"<p>ISO 10650-1:2004 specifies requirements and test methods for powered polymerization activators in the blue wavelength region intended for chair-side use in polymerization of dental polymer-based materials. ISO 10650-1:2004 applies to powered tungsten-halogen lamps and rechargeable battery-powered tungsten-halogen polymerization activators.</p><p>ISO 10650-1:2004 is not applicable to powered

39734,IS,,ISO 10650-2:2007,Dentistry — Powered polymerization activators — Part 2: Light-emitting diode (LED) lamps,Art dentaire — Activateurs électriques de polymérisation — Partie 2: Lampes à diodes émettrices de lumière (LED),2007-08-31,1,['11.060.20'],ISO/TC 106/SC 6,9599,[32180],[63424],"['en','fr']",7,"<p>ISO 10650-2:2007 specifies requirements and test methods for powered polymerization activators with light-emitting diodes (LED) in the blue wavelength region intended for chair-side use in polymerization of dental polymer-based restorative materials.</p><p>ISO 10650-2:2007 is not applicable to powered polymerization activators used in laboratory fabrication of indirect restorations, v

63424,IS,,ISO 10650:2015,Dentistry — Powered polymerization activators,Médecine bucco-dentaire — Activateurs électriques de polymérisation,2015-09-16,1,['11.060.20'],ISO/TC 106/SC 6,9599,"[38399,39734]",[73302],"['en','fr']",14,"<p>ISO 10650:2015 specifies requirements and test methods for powered polymerization activators in the 385 nm ? 515 nm wavelength region intended for chairside use in polymerization of dental polymer-based materials. This International Standard applies to quartz-tungsten-halogen lamps and light-emitting diode (LED) lamps. Powered polymerization activators could have internal power supply (rechargeable battery powered) or be connected to external (mains) power supply.

73302,IS,,ISO 10650:2018,Dentistry — Powered polymerization activators,Médecine bucco-dentaire — Activateurs électriques de polymérisation,2018-08-28,2,['11.060.20'],ISO/TC 106/SC 6,9599,[63424],[90668],"['en','fr']",15,"<p>This document specifies requirements and test methods for powered polymerization activators in the 380 nm to 515 nm wavelength region intended for chairside use in polymerization of dental polymer-based materials. </p><p>This document applies to quartz-tungsten-halogen lamps and light-emitting diode (LED) lamps. Powered polymerization activators could have internal power supply (rechargeable battery powered) or be connected to external (mains) power supply. Lasers or plas

18746,IS,,ISO 10651-1:1993,Lung ventilators for medical use — Part 1: Requirements,Ventilateurs pulmonaires à usage médical — Partie 1: Prescriptions,1993-06-03,1,['11.040.10'],ISO/TC 121/SC 3,9599,[11413],[23914],['en'],25,"<p>Is to be used in conjunction with IEC 601-1:1988. Specifies relevant requirements (general requirements, environmental conditions, protection against electric shock hazards, protection against excessive temperatures and other safety hazards, accuracy of operating data and protection against hazardous output, constructional requirements, additional requirements) for lung ventilators, excluding ventilators primarily intended for anaesthesia, home care, transport, and ot

22216,IS,,ISO 10651-2:1996,Lung ventilators for medical use — Part 2: Particular requirements for home care ventilators,Ventilateurs pulmonaires à usage médical — Partie 2: Prescriptions particulières pour ventilateurs pour soins domestiques,1996-08-01,1,['11.040.10'],ISO/TC 121/SC 3,9599,,"[35974,35973]",['en'],28,<p>Is part of a series of International Standards based on IEC 601-1:1988. Contains common requirements with IEC 601-2-12 and requirements from ISO 10651-1. It does apply the scope given in clause 1 of IEC 601-1 and specifies requirements for lung ventilators intended mainly for home care use.</p>

35973,IS,,ISO 10651-2:2004,Lung ventilators for medical use — Particular requirements for basic safety and essential performance — Part 2: Home care ventilators for ventilator-dependent patients,Ventilateurs pulmonaires à usage médical — Exigences particulières pour la sécurité de base et les performances essentielles — Partie 2: Ventilateurs pour soins à domicile pour patients dépendants,2004-06-29,2,['11.040.10'],ISO/TC 121/SC 3,9599,[22216],[61389],"['en','fr']",31,"<p>ISO 10651-2:2004 specifies requirements for lung ventilators intended for home applications for those patients who are dependent on ventilatory support. Such ventilators are considered life-supporting equipment, are frequen

21436,IS,,ISO 10651-3:1997,Lung ventilators for medical use — Part 3: Particular requirements for emergency and transport ventilators,Ventilateurs pulmonaires à usage médical — Partie 3: Exigences particulières pour ventilateurs de secours et de transport,1997-01-22,1,['11.040.10'],ISO/TC 121/SC 3,9599,,[72441],['en'],28,<p>Contains requirements for lung ventilators intended for the use in emergency situations and transport. These ventilators are often installed in ambulances or rescue vehicles. Based on IEC 601-1. The requirements of this part of ISO 10651 take precedence over those of IEC 601-1.</p>

30712,IS,,ISO 10651-4:2002,Lung ventilators — Part 4: Particular requirements for operator-powered resuscitators,Ventilateurs pulmonaires — Partie 4: Exigences relatives aux ressuscitateurs à puissance motrice manuelle,2002-03-14,1,['11.040.10'],ISO/TC 121/SC 3,9599,,[77803],"['en','fr']",22,<p>ISO 10651-4:2002 specifies requirements for operator-powered resuscitators intended for use with all age groups and which are portable and intended to provide lung ventilation to individuals whose breathing is inadequate. Operator-powered resuscitators for infants and children are designated according to body mass range and approximate age equivalent.</p><p>ISO 10651-4:2002 is not applicable to electr

35974,IS,,ISO 10651-6:2004,Lung ventilators for medical use — Particular requirements for basic safety and essential performance — Part 6: Home-care ventilatory support devices,Ventilateurs pulmonaires à usage médical — Exigences particulières pour la sécurité de base et les performances essentielles — Partie 6: Dispositifs d'assistance respiratoire à domicile,2004-06-28,1,['11.040.10'],ISO/TC 121/SC 3,9599,[22216],"[68844,68843]","['en','fr']",27,"<p>ISO 10651-6:2004 specifies the basic safety and essential performance requirements for home-care ventilatory support devices, intended mainly for use in home care but which could be used elsewhere (e.g. in hospitals) for appropriate patients fo

18750,IS,,ISO 10656:1996,Electric resistance welding — Integrated transformers for welding guns,Soudage électrique par résistance — Transformateurs incorporés pour pinces à souder,1996-09-19,1,"['29.180','25.160.30']",ISO/TC 44/SC 6,9599,,[61408],"['en','fr']",8,<p>Specifies transformers for electric resistance welding used in welding guns with integrated transformers (robot guns).</p>

34179,IS,Cor,ISO 10656:1996/Cor 1:2000,Electric resistance welding — Integrated transformers for welding guns — Technical Corrigendum 1,Soudage électrique par résistance — Transformateurs incorporés pour pinces à souder — Rectificatif technique 1,2000-07-06,1,"['29.180','25.160.30']",ISO/TC 44/SC 6,9599,,[61408],"['en','fr']",1,

1310,IS,,ISO 10658:1996,Industrial trucks operating in special conditions of stacking with load laterally displaced by powered devices — Additional stability test,"Chariots de manutention travaillant dans des conditions de gerbage spéciales, avec la charge décentrée latéralement par un dispositif à moteur — Essai de stabilité supplémentaire",1996-02-01,1,['53.060'],ISO/TC 110/SC 2,9599,,[42349],"['en','fr']",4,"<p>Describes an additional test for the stability of a laden truck fitted with a laterally fixed load-handling device, which can displace the centre of gravity in a substantial amount from the centre plane of the truck.</p>"

18754,IS,,ISO 10663:1999,Hexagon nuts with flange — Fine pitch thread,Écrous hexagonaux à embase cylindro-tronconique — Filetage à pas fin,1999-03-25,1,['21.060.20'],ISO/TC 2/SC 12,9599,,[61527],"['en','fr']",6,

18755,IS,,ISO 10664:1999,Hexalobular internal driving feature for bolts and screws,Empreinte à six lobes internes pour vis,1999-09-02,1,['21.060.10'],ISO/TC 2,9599,,[40257],"['en','fr']",7,

40257,IS,,ISO 10664:2005,Hexalobular internal driving feature for bolts and screws,Empreinte à six lobes internes pour vis,2005-06-30,2,['21.060.10'],ISO/TC 2/SC 11,9599,[18755],[63207],"['en','fr']",7,"<p>ISO 10664:2005 specifies the shape and basic dimensions of the hexalobular internal driving feature for bolts and screws, including the gauging method. Its intent is to provide the details necessary for inspection of the hexalobular driving feature. It is not suitable for, nor intended to be used as, a manufacturing standard.</p>"

56441,IS,,ISO 10667-1:2011,Assessment service delivery — Procedures and methods to assess people in work and organizational settings — Part 1: Requirements for the client,Livraison d'un service d'évaluation — Modes opératoires et méthodes d'évaluation des personnes au travail et des paramètres organisationnels — Partie 1: Exigences pour le client,2011-10-11,1,['03.080.30'],ISO/TC 260,9599,,[74716],"['en','ru']",20,"<p>ISO 10667-1:2011 establishes requirements and guidance for the client working with the service provider to carry out the assessment of an individual, a group, or an organization for work-related purposes. ISO 10667-1:2011 enables the client to base its decisions on sound assess

56436,IS,,ISO 10667-2:2011,Assessment service delivery — Procedures and methods to assess people in work and organizational settings — Part 2: Requirements for service providers,Livraison d'un service d'évaluation — Modes opératoires et méthodes d'évaluation des personnes au travail et des paramètres organisationnels — Partie 2: Exigences pour les fournisseurs de service,2011-10-11,1,['03.080.30'],ISO/TC 260,9599,,[74717],"['en','ru']",22,"<p>ISO 10667-2:2011 establishes requirements and guidance for the service provider in working with a client to carry out the assessment of an individual, group or organization for work-related purposes and to deliver quality assessment services.</p><p>ISO

18763,IS,,ISO 10673:1998,"Plain washers for screw and washer assemblies — Small, normal and large series — Product grade A","Rondelles plates pour vis à rondelle plate incorporée — Séries étroite, normale et large — Grade A",1998-07-02,1,['21.060.30'],ISO/TC 2/SC 11,9599,,[44117],"['en','fr']",5,

46039,IS,,ISO 10675-1:2008,"Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys","Essais non destructifs des assemblages soudés — Niveaux d'acceptation pour évaluation par radiographie — Partie 1: Acier, nickel, titane et leurs alliages",2008-02-27,1,['25.160.40'],ISO/TC 44/SC 5,9599,,[66908],"['en','fr']",12,"<p>ISO 10675-1:2008 specifies acceptance levels for indications from imperfections in butt welds of steel, nickel, titanium and their alloys detected by radiographic testing. If agreed, the acceptance levels may be applied to other types of welds or materials.</p>"

66908,IS,,ISO 10675-1:2016,"Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 1: Steel, nickel, titanium and their alloys","Essais non destructifs des assemblages soudés — Niveaux d'acceptation pour évaluation par radiographie — Partie 1: Acier, nickel, titane et leurs alliages",2016-12-05,2,['25.160.40'],ISO/TC 44/SC 5,9599,[46039],[79616],"['en','fr']",10,"<p>ISO 10675-1:2016 specifies acceptance levels for indications from imperfections in butt welds of steel, nickel, titanium and their alloys detected by radiographic testing. If agreed, the acceptance levels can be applied to other types of welds or materials.</p><p>The acceptance levels can be related

55420,IS,,ISO 10675-2:2010,Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys,Essais non destructifs des assemblages soudés — Niveaux d'acceptation pour évaluation par radiographie — Partie 2: Aluminium et ses alliages,2010-08-20,1,['25.160.40'],ISO/TC 44/SC 5,9599,,[69609],"['en','fr']",10,"<p>ISO 10675:2010 specifies acceptance levels for indications from imperfections in aluminium butt welds detected by radiographic testing. If agreed, the acceptance levels may be applied to other types of welds or materials.</p><p>The acceptance levels may be related to welding standards, application standards, specifications or codes.</p><p>I

69609,IS,,ISO 10675-2:2017,Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys,Essais non destructifs des assemblages soudés — Niveaux d'acceptation pour l'évaluation par radiographie — Partie 2: Aluminium et ses alliages,2017-10-02,2,['25.160.40'],ISO/TC 44/SC 5,9599,[55420],[79617],"['en','fr']",10,"<p>ISO 10675-2:2017 specifies acceptance levels for indications from imperfections in aluminium butt welds detected by radiographic testing. If agreed, the acceptance levels can be applied to other types of welds or materials.</p><p>The acceptance levels can be related to welding standards, application standards, specifications or cod

46019,IS,,ISO 10678:2010,"Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue",Céramiques techniques — Détermination de l'activité photocatalytique des surfaces dans un milieu aqueux par dégradation du bleu de méthylène,2010-09-10,1,['81.060.30'],ISO/TC 206,9599,,[86490],"['en','fr']",12,"<p>ISO 10678:2010 specifies a method for the determination of the photocatalytic activity of surfaces by degradation of the dye molecule methylene blue (MB) in aqueous solution using artificial ultraviolet (UV) radiation, and characterizes the ability of photoactive surfaces to degrade dis

46040,IS,,ISO 10679:2010,Steel — Cast tool steel,Acier — Aciers moulés à outil,2010-01-13,1,['77.140.80'],ISO/TC 17/SC 11,9599,,[73043],"['en','fr','ru']",4,<p>ISO 10679:2010 covers tool-steel compositions for usable cast shapes in the annealed condition.</p>

56228,IS,Cor,ISO 10679:2010/Cor 1:2010,Steel — Cast tool steel — Technical Corrigendum 1,Acier — Aciers moulés à outil — Rectificatif technique 1,2010-04-29,1,['77.140.80'],ISO/TC 17/SC 11,9599,,[73043],"['en','fr','ru']",3,

18772,IS,,ISO 10683:2000,Fasteners — Non-electrolytically applied zinc flake coatings,Éléments de fixation — Revêtements non électrolytiques de lamelles de zinc,2000-07-27,1,"['21.060.01','25.220.40']",ISO/TC 2/SC 14,9599,,[55924],"['en','fr']",9,

55924,IS,,ISO 10683:2014,Fasteners — Non-electrolytically applied zinc flake coatings,Fixations — Revêtements non électrolytiques de zinc lamellaire,2014-06-10,2,"['21.060.01','25.220.40']",ISO/TC 2/SC 14,9599,[18772],[70609],"['en','fr']",30,"<p>ISO 10683:2014 specifies requirements for non-electrolytically applied zinc flake coatings for steel fasteners. It applies to coatings:</p><ul><li>with or without hexavalent chromium;</li><li>with or without top coat;</li><li>with or without lubricant (integral lubricant and/or subsequently added lubricant).</li></ul><p>It applies to bolts, screws, studs and nuts with ISO metric thread, to fasteners with non-ISO metric thread, and to non-threaded fa

52929,IS,,ISO 10685-1:2011,Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification — Part 1: Product identification and electronic catalogue product hierarchy,Optique ophtalmique — Catalogue de montures de lunettes et de lunettes de soleil et identification — Partie 1: Identification des produits et hiérarchie des catalogues électroniques,2011-12-15,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[75654],"['en','fr']",15,"<p>ISO 10685-1:2011 establishes rules and requirements for the definition of a unique identifier for spectacle frames and sunglass frames, and specifies the data information and file format used for identifying spectacle frames and sunglass frames.

54618,IS,,ISO 10685-2:2012,Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification — Part 2: Commercial information,Optique ophtalmique — Catalogue de montures de lunettes et de lunettes de soleil et identification — Partie 2: Informations commerciales,2012-11-13,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[69045],"['en','fr']",11,<p>ISO 10685-2:2012 specifies the commercial information and file format used for trading spectacle frames and sunglasses. It includes sunglass clip-ons.</p>

54619,IS,,ISO 10685-3:2012,Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification — Part 3: Technical information,Optique ophtalmique — Catalogue de montures de lunettes et de lunettes de soleil et identification — Partie 3: Informations techniques,2012-11-13,1,['11.040.70'],ISO/TC 172/SC 7,9599,,[75655],"['en','fr']",15,

5563,IS,,ISO 1070:1973,Liquid flow measurement in open channels — Slope-area method,Mesure de débit des liquides dans les canaux découverts — Méthode de la pente de la ligne d'eau,1973-06-01,1,['17.120.20'],ISO/TC 113,9599,,[5564],"['en','fr']",6,

5564,IS,,ISO 1070:1992,Liquid flow measurement in open channels — Slope-area method,Mesure de débit des liquides dans les canaux découverts — Méthode de la pente de la ligne d'eau,1992-06-11,2,['17.120.20'],ISO/TC 113/SC 1,9599,[5563],[69287],"['en','fr']",12,"<p>The method is suitable for use under somewhat special conditions when direct measurement of discharge by more accurate methods is not possible. It can be used with reasonable accuracy in open channels having stable boundaries, bed and sides (e.g. rock), in lined channels and in channels with relatively coarse material. In other cases it is subject to large uncertainties, and it is not suitable for use in very large channels, channel

27608,IS,Amd,ISO 1070:1992/Amd 1:1997,Liquid flow measurement in open channels — Slope-area method — Amendment 1,Mesure de débit des liquides dans les canaux découverts — Méthode de la pente de la ligne d'eau — Amendement 1,1997-12-04,2,['17.120.20'],ISO/TC 113/SC 1,9599,,[69287],"['en','fr']",1,

18792,IS,,ISO 10703:1997,Water quality — Determination of the activity concentration of radionuclides by high resolution gamma-ray spectrometry,Qualité de l'eau — Détermination de l'activité volumique des radionucléides par spectrométrie gamma à haute résolution,1997-05-15,1,"['13.060.60','13.280']",ISO/TC 147,9599,,[42756],"['en','fr']",17,

42756,IS,,ISO 10703:2007,Water quality — Determination of the activity concentration of radionuclides — Method by high resolution gamma-ray spectrometry,Qualité de l'eau — Détermination de l'activité volumique des radionucléides — Méthode par spectrométrie gamma à haute résolution,2007-11-15,2,"['17.240','13.060.60']",ISO/TC 147/SC 3,9599,[18792],[78790],"['en','fr']",20,"<p>ISO 10703:2007 specifies a method for the simultaneous determination of the activity concentration of various radionuclides emitting gamma rays with energies between 40 keV and 2 MeV in water samples, by gamma‑ray spectrometry using germanium detectors with high energy resolution in combination with a multichannel analys

46063,IS,,ISO 10704:2009,Water quality — Measurement of gross alpha and gross beta activity in non-saline water — Thin source deposit method,Qualité de l'eau — Mesurage des activités alpha globale et bêta globale des eaux non salines — Méthode par dépôt d'une source fine,2009-11-10,1,"['13.060.60','13.280']",ISO/TC 147/SC 3,9599,,[70597],"['en','fr','ru']",13,"<p>ISO 10704:2009 specifies a method for the determination of gross alpha and gross beta activity in non‑saline waters for alpha- and beta‑emitting radionuclides.</p><p>The method is applicable to raw and potable waters containing a small quantity of dissolved matter. It can, after adaptation, apply to other kind of waters.</p><p>The r

5565,IS,,ISO 1071:1983,Covered electrodes for manual arc welding of cast iron — Symbolization,Électrodes enrobées pour le soudage manuel à l'arc des fontes — Symbolisation,1983-12-01,1,['25.160.20'],ISO/TC 44/SC 3,9599,,[32098],"['en','fr']",5,"<p>Fixes the specifications with which the covered electrodes shall comply on the basis of the chemical composition of the electrode core wire or of the weld metal. Cancels and replaces ISO Recommendation R 1071-1969, of which it constitutes a technical revision. An annex contains descriptions and examples of use of electrodes.</p>"

32098,IS,,ISO 1071:2003,"Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification","Produits consommables pour le soudage - Electrodes enrobées, fils d'apport, baguettes et fils fourrés pour le soudage par fusion de la fonte - Classification",2003-07-10,2,['25.160.20'],ISO/TC 44/SC 3,9599,[5565],[64568],"['en','fr']",14,"<p>ISO 1071:2003 specifies requirements for classification of covered electrodes for manual metal arc welding, wire electrodes for metal arc welding, tubular cored electrodes for metal arc welding with and without a gas shield, rods for TIG-welding and rods for oxyfuel gas welding of unalloyed cast ir

18801,IS,,ISO 10713:1992,Jewellery — Gold alloy coatings,Joaillerie — Revêtements d'alliages d'or,1992-11-19,1,['39.060'],ISO/TC 174,9599,,[84976],"['en','fr']",3,"<p>Specifies the coating thickness requirements and the gold fineness of the coating. Also defines current terms (in English, French, German) concerning gold alloy coatings. Does not apply to watch bracelets if they are permanently attached to the case.</p>"

18802,IS,,ISO 10714:1992,Steel and iron — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method,Aciers et fontes — Dosage du phosphore — Méthode par spectrophotométrie au phosphovanadomolybdate,1992-05-14,1,['77.080.01'],ISO/TC 17/SC 1,9599,[7707],[86372],"['en','fr']",8,"<p>The method is applicable with the following limitations: phosphorus contents between 0,001 0 % (m/m) and 1,0 % (m/m), application ranges and test portions in table 1 depending on the concentration of the interfering elements (arsenic, hafnium, niobium, tantalum, titanium, tungsten).</p>"

18803,IS,,ISO 10715:1997,Natural gas — Sampling guidelines,Gaz naturel — Lignes directrices pour l'échantillonnage,1997-05-29,1,['75.060'],ISO/TC 193/SC 1,9599,,"[54983,67136,76105]","['en','fr']",39,

18809,IS,,ISO 10716:1994,Paper and board — Determination of alkali reserve,Papier et carton — Détermination de la réserve alcaline,1994-12-22,1,['85.060'],ISO/TC 6,9599,,[83376],"['en','fr']",3,"<p>Describes a method for the determination of the alkali reserve of papers and boards. Intended for products that contain alkaline pigments or other alkaline material, added in order to improve their resistance to acid attack. Not applicable to laminated, printed or otherwise processed grades that will not disintegrate completely by the procedure described.</p>"

18811,IS,,ISO 10718:1993,"Cork stoppers — Enumeration of colony-forming units of yeasts, moulds and bacteria capable of growth in an alcoholic medium","Bouchons en liège — Dénombrement des unités formant colonie de levures, de moisissures et de bactéries capables de se développer dans un milieu alcoolique",1993-04-08,1,"['07.100.99','79.100','55.100']",ISO/TC 87,9599,,[35026],"['en','fr']",2,"<p>The principle of the method specified consists in direct counting of the colonies by incubation in malt extract broth, using a membrane filtration procedure. Applies to cork stoppers which were submitted to sanitizing procedures and are contained in sealed packages.</p>"

35026,IS,,ISO 10718:2002,"Cork stoppers — Enumeration of colony-forming units of yeasts, moulds and bacteria capable of growth in an alcoholic medium","Bouchons en liège — Dénombrement des unités formant colonie de levures, de moisissures et de bactéries capables de se développer dans un milieu alcoolique",2002-08-22,2,"['07.100.99','55.100','79.100']",ISO/TC 87,9599,[18811],[65028],"['en','fr']",6,"<p>ISO 10718:2002 specifies a method to enumerate the colony-forming units of yeasts, moulds and bacteria which can exist on cork stoppers and can grow in an alcoholic solution under certain conditions.</p><p>ISO 10718:2002 applies to cork stoppers which were submitted to the usual sanitizing pro

18814,IS,,ISO 10721-1:1997,Steel structures — Part 1: Materials and design,Structures en acier — Partie 1: Matériaux et conception,1997-02-20,1,['91.080.13'],ISO/TC 167,9599,,[87645],['en'],110,"<p>Establishes the principles and general rules for the use of steel materials and design of steel structures in buildings. It is also applicable to bridges, civil engineering and related structures, but for such structures it may be necessary to consider other requirements.</p>"

2348,IS,,ISO 10721-2:1999,Steel structures — Part 2: Fabrication and erection,Structures en acier — Partie 2: Fabrication et montage,1999-05-06,1,['91.080.13'],ISO/TC 167,9599,,"[77284,60137,77280,77277,77281,77285,77282,59650]",['en'],44,"<p>This part of ISO 10721 specifies the requirements for the fabrication, erection and inspection of structural steelwork</p><p>in buildings designed in accordance with ISO 10721-1, including steelwork in composite steel and concrete</p><p>structures.</p><p>This part of ISO 10721 is also applicable to bridges, off-shore and other civil engineering and related structures, but</p><p>for such structures it may be necessary to consider other requirements.</p><

33062,IS,Cor,ISO 10721-2:1999/Cor 1:1999,Steel structures — Part 2: Fabrication and erection — Technical Corrigendum 1,Structures en acier — Partie 2: Fabrication et montage — Rectificatif technique 1,1999-11-04,1,['91.080.10'],ISO/TC 167,9599,,"[77284,77280,77277,77281,77285,77282,59650]",['en'],3,

45502,IS,,ISO 10722:2007,Geosynthetics — Index test procedure for the evaluation of mechanical damage under repeated loading — Damage caused by granular material,Géosynthétiques — Mode opératoire d'essai pour évaluer l'endommagement mécanique sous charge répétée — Endommagement causé par des matériaux granulaires,2007-05-21,1,['59.080.70'],ISO/TC 221,9599,[18815],[70847],"['en','fr']",6,"<p>ISO 10722:2007 describes an index test procedure for simulating mechanical damage to geosynthetics, caused by granular material, under repeated loading. The damage is assessed visually and by the loss of tensile strength.</p>"

18816,IS,,ISO 10723:1995,Natural gas — Performance evaluation for on-line analytical systems,Gaz naturel — Évaluation des performances des systèmes d'analyse en ligne,1995-12-27,1,['75.060'],ISO/TC 193/SC 1,9599,,[55712],"['en','fr']",43,<p>Describes a method of assessing whether an analytical system for natural gas is satisfactory provided that the analytical requirements have been clearly defined and the analytical and calibration procedures have been fully described.</p>

30538,IS,Cor,ISO 10723:1995/Cor 1:1998,Natural gas — Performance evaluation for on-line analytical systems — Technical Corrigendum 1,Gaz naturel — Évaluation des performances des systèmes d'analyse en ligne — Rectificatif technique 1,1998-07-02,1,['75.060'],ISO/TC 193/SC 1,9599,,[55712],"['en','fr']",2,

18817,IS,,ISO 10724:1994,Plastics — Thermosetting moulding materials — Injection moulding of multipurpose test specimens,Plastiques — Matières à mouler thermodurcissables — Moulage par injection d'éprouvettes à usages multiples,1994-07-28,1,['83.080.10'],ISO/TC 61/SC 12,9599,,"[28181,26828]","['en','fr']",10,

18819,IS,,ISO 10726:1992,Portable chain saws — Chain catcher — Dimensions and mechanical strength,Scies à chaîne portatives — Enrouleur de chaîne — Dimensions et résistance mécanique,1992-04-30,1,['65.060.80'],ISO/TC 23/SC 17,9599,,[79185],"['en','fr']",2,<p>Specifies the requirements and the corresponding test method.</p>

18820,IS,,ISO 10727:1995,Tea and instant tea in solid form — Determination of caffeine content — Method using high-performance liquid chromatography,Thé et thé soluble sous forme solide — Détermination de la teneur en caféine — Méthode par chromatographie liquide à haute performance,1995-01-19,1,['67.140.10'],ISO/TC 34/SC 8,9599,,[31494],"['en','fr']",6,"<p>The method specified is based on extracting the caffeine from a test portion with water at 90 °C in the presence of magnesium oxide, filtration followed by determination of the caffeine content by HPLC with UV detection. Applies to teas and instant teas with a caffeine content of greater than 0,3 % (m/m).</p>"

5569,IS,,ISO 1074:1975,Counterbalanced lift trucks — Stability — Basic tests,Chariots élévateurs travaillant en porte-à-faux — Stabilité — Essais de base,1975-10-01,1,['53.060'],ISO/TC 110,9599,,[5570],"['en','fr']",3,

5570,IS,,ISO 1074:1991,Counterbalanced fork-lift trucks — Stability tests,Chariots élévateurs à fourche travaillant en porte-à-faux — Essais de stabilité,1991-03-21,2,['53.060'],ISO/TC 110/SC 2,9599,[5569],[41211],"['en','fr']",5,"<p>This second edition cancels and replaces the first edition (ISO 1074:1975): the rated capacity has been increased and the applicability range altered. Applies to tiltable or non-tiltable masts, of rated capacity up to and including 50 000 kg. Does not apply to trucks with retractable devices such as a mast or fork. Gives stability tests for fork-lift trucks and for trucks with attachments.</p>"

18841,IS,,ISO 10752:1994,Coal sizing equipment — Performance evaluation,Charbon — Équipement pour la granulométrie — Évaluation de l'aptitude à l'emploi,1994-05-19,1,['73.120'],ISO/TC 27/SC 1,9599,,[75886],['en'],35,"<p>Describes the principles and methods for the expression of results of performance tests on sizing equipment used in coal preparation, and includes methods for the evaluation of performance parameters. Performance test procedures and size measurement techniques are recommended. Applies to all types of sizing equipment, categorized as screens, classifiers, and others. The procedure described applies to two-product separations. Performance assessment of multiproduct separations

75886,IS,,ISO 10752:2019,Coal sizing equipment — Performance evaluation,Équipement pour la granulométrie du charbon — Évaluation de l'aptitude à l'emploi,2019-06-12,2,['73.120'],ISO/TC 27/SC 1,9599,[18841],[90374],['en'],39,"<p>This document describes the principles and methods for the expression of results of performance tests on sizing equipment used in coal preparation, and includes methods for the evaluation of performance parameters. Performance test procedures and size measurement techniques are recommended.</p><p>This document applies to all types of sizing equipment, categorized as follows:</p><p>— screens;</p><p>— classifiers;</p><p>— others.</p><p>The proced

18842,IS,,ISO 10753:1994,Coal preparation plant — Assessment of the liability to breakdown in water of materials associated with coal seams,Ateliers de préparation du charbon — Évaluation de la fiabilité de la fragmentation dans l'eau de matériaux associés aux gisements de charbon,1994-01-20,1,['73.120'],ISO/TC 27/SC 1,9599,,[75887],['en'],9,"<p>The principle of the method specified is degrading a test portion of shale in the size range 5,6 mm to 2,8 mm, by controlled agitation in water, determining the proportion of degraded material passing through a 500 µm sieve, and determining the proportion of degraded material of nominal top size less than 10 µm by sedimentation.</p>"

22766,IS,,ISO 10762:1997,Hydraulic fluid power — Cylinder mounting dimensions — 10 MPa (100 bar) series,Transmissions hydrauliques — Dimensions d'interchangeabilité des vérins — Série 10 MPa (100 bar),1997-11-27,1,['23.100.20'],ISO/TC 131/SC 3,9599,,[61343],"['en','fr']",16,

1620,IS,,ISO 10763:1994,"Hydraulic fluid power — Plain-end, seamless and welded precision steel tubes — Dimensions and nominal working pressures","Transmissions hydrauliques — Tubes de précision en acier, soudés ou non, à extrémités lisses — Dimensions et pressions nominales de travail",1994-11-17,1,"['23.100.40','77.140.75']",ISO/TC 131/SC 4,9599,,[73040],"['en','fr']",3,<p>Specifies sizes and nominal working pressures for tubes with outside diameters in accordance with ISO 4397 and wall thicknesses or mechanical properties in accordance with ISO 3304 (seamless precision steel tubes) and ISO 3305 (welded precision steel tubes). The nominal working pressures included herein reflect a design

73040,IS,,ISO 10763:2019,"Hydraulic fluid power — Plain-end, seamless and welded precision steel tubes — Dimensions and nominal working pressures","Transmissions hydrauliques — Tubes de précision en acier, soudés ou non, à extrémités lisses — Dimensions et pressions nominales de travail",2019-12-06,2,"['23.100.40','77.140.75']",ISO/TC 131/SC 4,9599,[1620],[80781],['en'],4,"<p>This document specifies sizes and nominal working pressures for tubes with outside diameters in accordance with ISO 4397, and wall thicknesses and mechanical properties in accordance with ISO 3305 (seamless precision steel tubes} and ISO 3305 (welded precision steel tubes). The nominal working pressures included in this

1944,IS,,ISO 10766:1996,Hydraulic fluid power — Cylinders — Housing dimensions for rectangular-section-cut bearing rings for pistons and rods,Transmissions hydrauliques — Vérins — Dimensions de logements de dispositifs de guidage à section rectangulaire pour pistons et tiges de piston,1996-12-26,1,['23.100.20'],ISO/TC 131/SC 7,9599,,[36243],"['en','fr']",7,<p>Specifies the preferred range of nominal dimensions and associated tolerances for a series of hydraulic cylinder piston and rod housings for rectangular-section-cut bearing rings. Does not give any details of bearing ring design.</p>

36243,IS,,ISO 10766:2006,Hydraulic fluid power — Cylinders — Housing dimensions for rectangular-section-cut bearing rings for pistons and rods,Transmissions hydrauliques — Vérins — Dimensions de logements de dispositifs de guidage à section rectangulaire pour pistons et tiges de piston,2006-01-18,2,['23.100.20'],ISO/TC 131/SC 7,9599,[1944],"[62699,60450]","['en','fr']",9,"ISO 10766:2006 specifies the preferred range of nominal dimensions and associated tolerances for a series of hydraulic cylinder piston and rod housings for rectangular-section-cut bearing rings, of the type shown in Figure 1, for applications in the following range of dimensions:<ul><li>for cylinders with bores of 16 mm to

1701,IS,,ISO 10767-1:1996,Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Precision method for pumps,Transmissions hydrauliques — Détermination des niveaux d'onde de pression engendrés dans les circuits et composants — Partie 1: Méthode de précision pour les pompes,1996-03-14,1,['23.100.10'],ISO/TC 131/SC 8,9599,,[59414],"['en','fr']",22,<p>Specifies a precision method for the determination of pressure ripple levels and source impedance generated in hydraulic fluid power systems and components by positive-displacement hydraulic pumps.</p>

25882,IS,,ISO 10767-3:1999,Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 3: Method for motors,Transmissions hydrauliques — Détermination des niveaux d'onde de pression engendrés dans les circuits et composants — Partie 3: Méthode pour les moteurs,1999-12-02,1,['23.100.10'],ISO/TC 131/SC 8,9599,,[86110],"['en','fr']",26,

1757,IS,,ISO 10770-1:1998,Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 1: Test methods for four-way directional flow control valves,Transmissions hydrauliques — Distributeurs hydrauliques à modulation électrique — Partie 1: Méthodes d'essai pour distributeurs à quatre voies,1998-05-14,1,['23.100.50'],ISO/TC 131/SC 8,9599,[12741],[50159],"['en','fr']",40,

22770,IS,,ISO 10770-2:1998,Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 2: Test methods for three-way directional flow control valves,Transmissions hydrauliques — Distributeurs hydrauliques à modulation électrique — Partie 2: Méthodes d'essai pour distributeurs à trois voies,1998-05-14,1,['23.100.50'],ISO/TC 131/SC 8,9599,[12741],[55084],"['en','fr']",34,

43219,IS,,ISO 10770-3:2007,Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 3: Test methods for pressure control valves,Transmissions hydrauliques — Distributeurs hydrauliques à modulation électrique — Partie 3: Méthodes d'essai pour distributeurs de commande de pression,2007-10-02,1,['23.100.50'],ISO/TC 131/SC 8,9599,,[73619],"['en','fr']",38,<p>ISO 10770-3:2007 describes test methods for determining the performance characteristics of electrically modulated hydraulic pressure control valves.</p>

32175,IS,,ISO 10771-1:2002,Hydraulic fluid power — Fatigue pressure testing of metal pressure-containing envelopes — Part 1: Test method,Transmissions hydrauliques — Essais de fatigue des enveloppes métalliques sous pression — Partie 1: Méthode d'essai,2002-07-18,1,['23.100.99'],ISO/TC 131/SC 8,9599,,[59660],"['en','fr']",14,"<p>ISO 10771 specifies a method of fatigue testing the pressure-containing envelopes of components used in hydraulic fluid power systems under sustained steady cyclic internal pressure loads.</p><p>ISO 10771 is only applicable to component pressure-containing envelopes that are manufactured from metals, are operated at temperatures that exclude creep and low-temperature

18852,IS,,ISO 10775:1995,"Paper, board and pulps — Determination of cadmium content — Atomic absorption spectrometric method","Papier, carton et pâtes — Détermination de la teneur en cadmium — Méthode par spectrométrie d'absorption atomique",1995-05-18,1,"['85.060','85.040']",ISO/TC 6,9599,,[63060],"['en','fr']",4,"<p>Specifies a method for the determination of traces of cadmium in all types of paper, board and pulp, including products containing recycled fibre, that can be wet-combusted in nitric acid.</p>"

46098,IS,,ISO 10785:2011,Space systems — Bellows — Design and operation,Systèmes spatiaux — Souffleries — Conception et fonctionnement,2011-09-27,1,['49.140'],ISO/TC 20/SC 14,9599,,[85530],['en'],14,"<p>ISO 10785:2011 specifies general and detailed requirements for bellows used in space systems. It establishes requirements with regard to material, design, analysis, fabrication, material, testing, inspection and operation for space use.</p><p>ISO 10785:2011 is applicable to metallic bellows which are used as pressure bearing components and are integrated into a pressure system. ISO 10785:2011 is not applicable to engine bellows or valve bellows.</p>"

46099,IS,,ISO 10786:2011,Space systems — Structural components and assemblies,Systèmes spatiaux — Composants et assemblages de structure,2011-07-08,1,['49.140'],ISO/TC 20/SC 14,9599,,[85531],['en'],65,"<p>ISO 10786:2011 establishes requirements for the design; material selection and characterization; fabrication; testing and inspection of all structural items in space systems, including expendable and reusable launch vehicles, satellites and their payloads. When implemented for a particular space system, it will assure high confidence in achieving safe and reliable operation in all phases of its planned mission.</p><p>ISO 10786:2011 applies specifically to all structural items, including fra

5576,IS,,ISO 1079:1989,"Metallic materials — Hardness test — Verification of Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T)","Matériaux métalliques — Essai de dureté — Contrôle des machines d'essai de dureté superficielle Rockwell (échelles 15N, 30N, 45N, 15T, 30T et 45T)",1989-10-19,1,['77.040.10'],ISO/TC 164/SC 3,9599,,[26048],"['en','fr']",6,

18856,IS,,ISO 10790:1994,Measurement of fluid flow in closed conduits — Coriolis mass flowmeters,Mesure de débit des fluides dans les conduites fermées — Débitmètres massiques à effet Coriolis,1994-09-29,1,['17.120.10'],ISO/TC 30/SC 5,9599,,[28531],"['en','fr']",13,

28531,IS,,ISO 10790:1999,"Measurement of fluid flow in closed conduits — Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)","Mesure de débit des fluides dans les conduites fermées — Lignes directrices pour la sélection, l'installation et l'utilisation des mesureurs à effet Coriolis (mesurages de débit-masse, masse volumique et débit-volume)",1999-04-29,2,['17.120.10'],ISO/TC 30/SC 5,9599,[18856],[57407],['en'],29,

34890,IS,Amd,ISO 10790:1999/Amd 1:2003,"Measurement of fluid flow in closed conduits — Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements) — Amendment 1: Guidelines for gas measurement","Mesure de débit des fluides dans les conduites fermées — Lignes directrices pour la sélection, l'installation et l'utilisation des mesureurs à effet Coriolis (mesurages de débit-masse, masse volumique et débit-volume) — Amendement 1: Lignes directrices pour le mesurage des gaz",2003-06-03,2,['17.120.10'],ISO/TC 30/SC 5,9599,,[57407],['en'],7,

18857,IS,,ISO 10791-1:1998,Test conditions for machining centres — Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis),Conditions d'essai pour centres d'usinage — Partie 1: Essais géométriques des machines à broche horizontale et à têtes accessoires (axe Z horizontal),1998-09-10,1,['25.040.10'],ISO/TC 39/SC 2,9599,,[54729],"['en','fr']",55,

42038,IS,,ISO 10791-10:2007,Test conditions for machining centres — Part 10: Evaluation of thermal distortions,Conditions d'essai des centres d'usinage — Partie 10: Évaluation des déformations thermiques,2007-02-28,1,['25.040.10'],ISO/TC 39/SC 2,9599,,"[73817,73168]","['en','fr']",8,"<p>ISO 10791-10:2007 specifies, with reference to ISO 230-3, tests for the evaluation of thermal distortions of the machine structure and positioning system, up to 2 000 mm in length, of machining centres. It gives three test methods: environmental temperature variation error, thermal distortion caused by rotating spindle, and thermal distortion caused by moving linear axes.</p><p>There is no intention of assign