Withdrawn and superseded ISO standards — page 128 of 246

11064,IS,,ISO 5043:1977,Withdrawal of ISO 5043-1977,Annulation de l'ISO 5043-1977,1977-06-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1,

11068,IS,,ISO 5048:1979,Continuous mechanical handling equipment — Belt conveyors with carrying idlers — Calculation of operating power and tensile forces,Engins de manutention continue — Transporteurs à courroie munis de rouleaux porteurs — Calcul de la puissance d'entraînement et des efforts de tension,1979-09-01,1,['53.040.10'],ISO/TC 101,9599,,[11069],['en'],15,

11070,IS,,ISO 5049-1:1980,Mobile continuous bulk handling equipment — Part 1: Rules for the design of structures,Appareils mobiles de manutention continue pour produits en vrac — Partie 1: Règles pour le calcul des charpentes,1980-09-01,1,['53.040'],ISO/TC 101,9599,,[11071],"['en','fr']",45,

4560,IS,,ISO 505:1982,Conveyor belts — Tear propagation resistance of the carcass — Method of test,Courroies transporteuses — Résistance à la propagation d'une déchirure dans la carcasse — Méthode d'essai,1982-05-01,2,['53.040.20'],ISO/TC 41/SC 3,9599,,[22091],"['en','fr']",3,

22091,IS,,ISO 505:1999,Conveyor belts — Method for the determination of the tear propagation resistance of textile conveyor belts,Courroies transporteuses — Méthode de détermination de la résistance à la propagation d'une déchirure dans les courroies transporteuses à carcasse textile,1999-12-09,3,['53.040.20'],ISO/TC 41/SC 3,9599,[4560],[73519],"['en','fr']",6,

73519,IS,,ISO 505:2017,Conveyor belts — Method for the determination of the tear propagation resistance of textile conveyor belts,Courroies transporteuses — Méthode de détermination de la résistance à la propagation d'une déchirure dans les courroies transporteuses à carcasse textile,2017-10-19,4,['53.040.20'],ISO/TC 41/SC 3,9599,[22091],[88481],"['en','fr']",5,"<p>ISO 505:2017 specifies a method of test for the measurement of the propagation resistance of an initial tear in textile conveyor belts, either in full thickness or of the carcass only.</p><p>This test is intended for application to textile belts in installations where there is a risk of longitudinal tearing.</p>"

11076,IS,,ISO 5053-1:1980,Powered industrial trucks — Terminology — Part 1: Classification and nomenclature,Chariots de manutention automoteurs — Terminologie — Partie 1: Classification et nomenclature,1980-09-01,1,"['01.040.53','53.060']",ISO/TC 110/SC 1,9599,,[11075],['en'],7,

56429,IS,,ISO 5053-1:2015,Industrial trucks — Terminology and classification — Part 1: Types of industrial trucks,Chariots de manutention — Terminologie et classification — Partie 1: Types de chariots de manutention,2015-10-16,2,"['01.040.53','53.060']",ISO/TC 110/SC 1,9599,[11075],[75384],"['en','fr']",75,"<p>ISO 5053-1:2015 establishes the terminology and classification of industrial trucks: wheeled vehicles having at least three wheels with a powered or non-powered driving mechanism ? except those running on rails ? which are designed either to carry, tow, push, lift, stack or tier in racks any kind of load, and which are controlled either by an operator or by driverless automation. In ad

11075,IS,,ISO 5053:1987,Powered industrial trucks — Terminology,Chariots de manutention automoteurs — Terminologie,1987-10-29,1,"['01.040.53','53.060']",ISO/TC 110/SC 1,9599,[11076],"[56430,56431,56432,56429,75448,41639,71065,75384]","['en','fr']",35,<p>Establishes the classification and definitions of these trucks; terms and definitions of main components and accessories are included. An annex gives terms and definitions relating to industrial trailers and to operating areas where such trucks are expected to be used.</p>

20080,IS,,ISO 5057:1993,Industrial trucks — Inspection and repair of fork arms in service on fork-lift trucks,Chariots de manutention — Contrôle et réparation des bras de fourche en service sur les chariots élévateurs à fourche,1993-12-09,1,['53.060'],ISO/TC 110/SC 2,9599,,[80278],"['en','fr']",2,"<p>Specifies methods for inspection (of surface cracks, difference in height of fork tips, positioning lock, legibility of marking, wear), repair and testing.</p>"

4561,IS,,ISO 506:1974,Natural rubber latex — Determination of volatile fatty acid number,Latex de caoutchouc naturel — Détermination de l'indice d'acide gras volatil,1974-04-01,1,['83.040.10'],ISO/TC 45,9599,,"[4562,4563]","['en','fr']",3,

4562,IS,,ISO 506:1985,Natural rubber latex concentrate — Determination of volatile fatty acid number,Latex concentré de caoutchouc naturel — Détermination de l'indice d'acide gras volatil,1985-11-14,2,['83.040.10'],ISO/TC 45/SC 3,9599,[4561],[4563],"['en','fr']",3,

4563,IS,,ISO 506:1992,"Rubber latex, natural, concentrate — Determination of volatile fatty acid number",Latex concentré de caoutchouc naturel — Détermination de l'indice d'acide gras volatil,1992-05-21,3,['83.040.10'],ISO/TC 45/SC 3,9599,"[4561,4562]","[30362,77456]","['en','fr']",4,"<p>The method is not necessarily suitable for latices from natural sources other than Hevea brasiliensis. It is not suitable for compounded latex, vulcanized latex, artificial dispersions of rubber or synthetic rubber latices.</p>"

11078,IS,,ISO 5061:1983,Animal feeding stuffs — Determination of castor oil seed husks — Microscopical method,Aliments des animaux — Détermination des coques de graines de ricin — Méthode microscopique,1983-07-01,1,['65.120'],ISO/TC 34/SC 10,9599,,[35599],"['en','fr']",6,"<p>The limit of detection is 5 mg/kg. The method consists in boiling a test portion successively with nitric acid solution and sodium hydroxide solution, washing and separation of the residue by decantation, drying, microscopical identification of fragments of oil seed husks and weighing. 7 figures show examples of the structure under low magnification.</p>"

41356,IS,,ISO 5068-1:2007,Brown coals and lignites — Determination of moisture content — Part 1: Indirect gravimetric method for total moisture,Charbons bruns et lignites — Détermination de l'humidité — Partie 1: Méthode gravimétrique indirecte pour l'humidité totale,2007-01-10,1,['73.040'],ISO/TC 27/SC 5,9599,[11090],[86985],['en'],8,<p>ISO 5068-1:2007 specifies two methods for determination of the total moisture content of brown coals and lignites using an indirect gravimetric single-stage method and a two-stage method.</p>

11090,IS,,ISO 5068:1983,Brown coals and lignites — Determination of moisture content — Indirect gravimetric method,Charbons bruns et lignites — Détermination de l'humidité — Méthode gravimétrique indirecte,1983-10-01,1,['73.040'],ISO/TC 27/SC 5,9599,,"[41357,41356]","['en','fr']",5,"<p>Specifies two basic procedures: a) A single-stage method which can be used for determination of the total moisture content of the special moisture sample or of a moisture sample taken from a common sample. b) A two-stage method which can be used for determination of the residual moisture content and, if required, also the total moisture content of a special moisture sample or of a moisture sample taken from a

41357,IS,,ISO 5068-2:2007,Brown coals and lignites — Determination of moisture content — Part 2: Indirect gravimetric method for moisture in the analysis sample,Charbons bruns et lignites — Détermination de l'humidité — Partie 2: Méthode gravimétrique indirecte pour l'humidité de l'échantillon d'analyse,2007-01-10,1,['73.040'],ISO/TC 27/SC 5,9599,[11090],[86986],['en'],6,<p>ISO 5068-2:2007 specifies a method for the determination of the moisture content in the analysis sample of brown coals and lignites using an indirect gravimetric method.</p>

11094,IS,,ISO 5071-1:1997,Brown coals and lignites — Determination of the volatile matter in the analysis sample — Part 1: Two-furnace method,Charbons bruns et lignites — Détermination des matières volatiles dans l'échantillon pour analyse — Partie 1: Méthode avec utilisation de deux fours,1997-07-24,1,['73.040'],ISO/TC 27/SC 5,9599,,[63045],['en'],7,

63045,IS,,ISO 5071-1:2013,Brown coals and lignites — Determination of the volatile matter in the analysis sample — Part 1: Two-furnace method,Charbons bruns et lignites — Détermination des matières volatiles dans l'échantillon pour analyse — Partie 1: Méthode avec utilisation de deux fours,2013-05-06,2,['73.040'],ISO/TC 27/SC 5,9599,[11094],[79742],"['en','fr']",8,<p>ISO 5071-1:2013 specifies a method of determining the volatile matter of brown coals and lignites.</p>

11095,IS,,ISO 5072:1997,Brown coals and lignites — Determination of true relative density and apparent relative density,Charbons bruns et lignites — Détermination de la densité relative vraie et de la densité relative apparente,1997-07-10,1,['73.040'],ISO/TC 27/SC 5,9599,,[63044],['en'],6,

63044,IS,,ISO 5072:2013,Brown coals and lignites — Determination of true relative density and apparent relative density,Charbons bruns et lignites — Détermination de la densité relative vraie et de la densité relative apparente,2013-05-06,2,['73.040'],ISO/TC 27/SC 5,9599,[11095],[79743],"['en','fr']",6,<p>ISO 5072:2013 describes methods for the determination of true relative density and the apparent relative density of brown coals and lignites.</p>

11096,IS,,ISO 5073:1985,Brown coals and lignites — Determination of humic acids,Charbons bruns et lignites — Dosage des acides humiques,1985-07-11,1,['73.040'],ISO/TC 27,9599,,[20458],"['en','fr']",3,

20458,IS,,ISO 5073:1999,Brown coals and lignites — Determination of humic acids,Charbons bruns et lignites — Dosage des acides humiques,1999-12-16,2,['73.040'],ISO/TC 27/SC 5,9599,[11096],[63043],['en'],7,

63043,IS,,ISO 5073:2013,Brown coals and lignites — Determination of humic acids,Charbons bruns et lignites — Dosage des acides humiques,2013-05-06,3,['73.040'],ISO/TC 27/SC 5,9599,[20458],[79744],"['en','fr']",7,<p>ISO 5073:2013 specifies volumetric methods for the determination of total humic acids and free humic acid of brown coals and lignites.</p>

11097,IS,,ISO 5074:1980,Hard coal — Determination of Hardgrove grindability index,Houille — Détermination de l'indice de broyabilité Hardgrove,1980-10-01,1,['73.040'],ISO/TC 27,9599,,[20314],"['en','fr']",8,

20314,IS,,ISO 5074:1994,Hard coal — Determination of Hardgrove grindability index,Houille — Détermination de l'indice de broyabilité Hardgrove,1994-12-15,2,['73.040'],ISO/TC 27/SC 5,9599,[11097],"[41149,63236]",['en'],9,<p>Cancels and replaces the first edition (1980). Specifies the method for determining the grindability index of hard coal using the Hardgrove machine. Also specifies the procedure for calibrating the test machine and for preparing the standard reference coal samples.</p>

11098,IS,,ISO 5077:1984,Textiles — Determination of dimensional change in washing and drying,Textiles — Détermination des variations dimensionnelles au lavage et au séchage domestiques,1984-11-01,1,['59.080.01'],ISO/TC 38/SC 2,9599,,[41877],"['en','fr']",3,"<p>Applicable to fabrics, garments or other textile articles when subjected to an appropriate combination of specified washing and drying procedures. In the case of textile articles or deformable materials it is necessary to exercise all possible caution in the interpretation of the results.</p>"

11100,IS,,ISO 5079:1977,Textiles — Man-made fibres — Determination of breaking strength and elongation of individual fibres,Textiles — Fibres chimiques — Détermination de la force de rupture et de l'allongement de rupture sur fibres individuelles,1977-05-01,1,['59.060.20'],ISO/TC 38,9599,,[11101],"['en','fr']",4,

11101,IS,,ISO 5079:1995,Textile fibres — Determination of breaking force and elongation at break of individual fibres,Fibres textiles — Détermination de la force de rupture et de l'allongement de rupture des fibres individuelles,1995-12-05,2,['59.060.01'],ISO/TC 38/SC 23,9599,[11100],[76604],"['en','fr']",6,<p>Describes method and conditions of test for the determination of the breaking force and elongation at break of individual fibres in the conditioned or wet state. The test is restricted to the use of constant-rate-of-extension testing apparatus. Applicable to all types of fibres.</p>

11102,IS,,ISO 5080:1977,Ropes and cordage — Sisal agricultural twines,Ficelles agricoles en sisal,1977-04-01,1,['59.080.50'],ISO/TC 38,9599,,[22502],"['en','fr']",5,

11103,IS,,ISO 5081:1977,Textiles — Woven fabrics — Determination of breaking strength and elongation (Strip method),Textiles — Tissus — Détermination de la force de rupture et de l'allongement de rupture (Méthode sur bande),1977-03-01,1,['59.080.30'],ISO/TC 38,9599,,[23363],"['en','fr']",8,

11105,IS,,ISO 5084:1977,Textiles — Determination of thickness of woven and knitted fabrics (other than textile floor coverings),Textiles — Détermination de l'épaisseur des étoffes tissées et tricotées (autres que les revêtements de sol textiles),1977-02-01,1,['59.080.30'],ISO/TC 38,9599,,[23348],"['en','fr']",2,

11109,IS,,ISO 5088:1976,Textiles — Ternary fibre mixtures — Quantitative analysis,Textiles — Mélanges ternaires de fibres — Analyse quantitative,1976-12-01,1,['59.060.01'],ISO/TC 38,9599,,[40562],"['en','fr']",13,"<p>The methods of quantitative analysis of mixtures of textile fibres are based on two processes: the manual separation and the chemical separation of fibre types. The method of manual separation should be used whenever possible, since it generally gives more accurate results. In general, the methods for quantitative chemical analysis of mixtures or textile fibres are based on the selective solutin of individual components of the mixture. Four variants of this procedure are possibl

11115,IS,,ISO 5126:1980,Micrographics — Computer output microfiche (COM) — Microfiche A6,Micrographie — Composition en sortie d'ordinateur sur microforme (COM) — Microfiche A6,1980-11-01,2,['37.080'],ISO/TC 171,9599,,[17808],"['en','fr']",14,

11116,IS,,ISO 5127-1:1983,Documentation and information — Vocabulary — Part 1: Basic concepts,Documentation et information — Vocabulaire — Partie 1: Notions fondamentales,1983-12-01,1,"['01.140.20','01.040.01']",ISO/TC 46,9599,,[33636],"['en','fr']",18,"<p>Presents, in two languages, terms and definitions of selected, mainly basic, concepts relevant to the field of information and documentation and identifies relationships between the entries. Is intended to facilitate international communication in that area. Contains indexes in English and French.</p>"

11124,IS,,ISO 5127-11:1983,Documentation and information — Vocabulary — Part 11: Audio-visual documents,Documentation et information — Vocabulaire — Partie 11: Documents audiovisuels,1983-12-01,1,"['01.140.20','01.040.01']",ISO/TC 46,9599,,[11125],"['en','fr']",16,

11125,IS,,ISO 5127-11:1987,Documentation and information — Vocabulary — Part 11: Audio-visual documents,Documentation et information — Vocabulaire — Partie 11: Documents audiovisuels,1987-07-09,2,"['01.140.20','01.040.01']",ISO/TC 46,9599,[11124],[33636],"['en','fr']",10,"<p>Presents, in two languages, terms and definitions of selected concepts relevant to the field of information and documentation and identifies relationships between the entries. Deals mainly with basic concepts which are used for describing audio-visual documents and also with derived terms which may be considered as the most useful for practical applications.</p>"

11117,IS,,ISO 5127-2:1983,Documentation and information — Vocabulary — Part 2: Traditional documents,Documentation et information — Vocabulaire — Partie 2: Documents de type traditionnel,1983-12-01,1,"['01.140.20','01.040.01']",ISO/TC 46,9599,,[33636],"['en','fr']",18,"<p>Presents, in two languages, terms and definitions of selected, mainly basic, concepts for information and documentation which are used for describing traditional documents and identifies relationships between the entries. Is intended to facilitate international communication in the field of information and documentation. Contains indexes in English and French.</p>"

33636,IS,,ISO 5127:2001,Information and documentation — Vocabulary,Information et documentation — Vocabulaire,2001-10-25,1,"['01.140.20','01.040.01']",ISO/TC 46,9599,"[11123,11116,26739,27544,11117,27545,11118,11125,11119,11126,2358,11120,2170,11121,2098]","[59743,34223]",['en'],152,

11118,IS,,ISO 5127-3:1988,Documentation and information — Vocabulary — Part 3: Iconic documents,Documentation et information — Vocabulaire — Partie 3: Documents iconiques,1988-11-03,1,"['01.140.20','01.040.01']",ISO/TC 46,9599,,[33636],"['en','fr']",17,"<p>Deals with iconic documents defined to reflect the needs of the trades and institutions which handle various types of pictures with any claim to being works of art. The list of terms is intended for use in such activities as buying and selling, collecting, cataloguing and filing, exhibiting and lending pictures. The range is limited to those terms most commonly used in galleries and collections, museums, libraries, archives, and other info

11126,IS,,ISO 5127-3A:1981,"Information and documentation — Vocabulary — Section 3a): Acquisition, identification, and analysis of documents and data","Information et documentation — Vocabulaire — Chapitre 3a) : Acquisition, identification et analyse des documents et des données",1981-12-01,1,"['01.140.20','01.040.01']",ISO/TC 46,9599,,[33636],"['en','fr']",23,

11120,IS,,ISO 5127-6:1983,Documentation and information — Vocabulary — Part 6: Documentary languages,Documentation et information — Vocabulaire — Partie 6: Langages documentaires,1983-04-01,1,"['01.140.20','01.040.01']",ISO/TC 46,9599,,[33636],"['en','fr']",23,"<p>Presents, in two languages, terms and definitions of selected concepts relevant to the field of information and documentation and identifies relationships between the entries. Deals mainly with basic concepts which are used for describing documentary languages (notations, relations, classifications, and thesauri). Contains indexes in English and French.</p>"

11127,IS,,ISO 5128:1980,Acoustics — Measurement of noise inside motor vehicles,Acoustique — Mesurage du bruit à l'intérieur des véhicules à moteur,1980-08-01,1,"['17.140.30','43.020']",ISO/TC 43/SC 1,9599,,"[27308,77369]","['en','fr']",6,"<p>Specifies the conditions for obtaining reproducible and comparable data of noise levels and noise spectra inside all kinds of road vehicles, excluding agricultural tractors and field machinery.</p>"

11128,IS,,ISO 5129:1981,Acoustics — Measurement of noise inside aircraft,Acoustique — Mesurage du bruit à l'intérieur des aéronefs,1981-04-01,1,"['17.140.30','49.020']",ISO/TC 43,9599,,[11129],"['en','fr']",4,

11129,IS,,ISO 5129:1987,Acoustics — Measurement of noise inside aircraft,Acoustique — Mesurage du bruit à l'intérieur des aéronefs,1987-12-10,2,"['17.140.30','49.020']",ISO/TC 43/SC 1,9599,[11128],"[32344,20229]","['en','fr']",4,"<p>Specifies the instrumentation and procedures for obtaining reproducible and comparable data. The results can be used to determine the compliance with maximum noise goals, to assess the noise exposure for hearing conservation purposes and to assess the degree of speech interference.</p>"

4572,IS,,ISO 513:1975,Application of carbides for machining by chip removal — Designation of the main groups of chip removal and groups of application,Application des carbures métalliques pour usinage par enlèvement de copeaux — Désignation des groupes principaux d'enlèvement de copeaux et des groupes d'application,1975-02-01,1,['25.100.01'],ISO/TC 29/SC 9,9599,,"[4571,4573]","['en','fr']",3,

4573,IS,,ISO 513:1991,Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application,Application des matériaux durs de coupe pour usinage par enlèvement de copeaux — Désignation des groupes principaux d'enlèvement de copeaux et des groupes d'application,1991-11-14,2,['25.100.01'],ISO/TC 29/SC 9,9599,[4572],[35207],"['en','fr']",5,"<p>Applies to the designation of materials which include hardmetals, ceramics, diamond, and boron nitride. Does not apply to other tools (percussion tools, wire drawing dies, etc.). This second edition cancels and replaces the first edition (1975).</p>"

25005,IS,Cor,ISO 513:1991/Cor 1:1994,Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application — Technical Corrigendum 1,Application des matériaux durs de coupe pour usinage par enlèvement de copeaux — Désignation des groupes principaux d'enlèvement de copeaux et des groupes d'application — Rectificatif technique 1,1994-11-17,2,['25.100.01'],ISO/TC 29/SC 9,9599,,[35207],['en'],1,<p>Replaces the term 'cutting angles' with the term 'tool normal rakes'.</p>

35207,IS,,ISO 513:2004,Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application,Classification et application des matériaux durs de coupe pour enlèvement de métal avec arêtes coupantes définies — Définition des groupes principaux et des groupes d'application,2004-04-19,3,['25.100.01'],ISO/TC 29/SC 9,9599,"[25005,4573,19233]",[59932],"['en','fr']",3,"<p>ISO 513:2004 specifies the classification and application of hard cutting materials including hard metals (carbides), ceramics, diamond and boron nitride, for machining by chip removal, and establishes their application.</p><p>It is not appl

11130,IS,,ISO 5130:1982,Acoustics — Measurement of noise emitted by stationary road vehicles — Survey method,Acoustique — Mesurage du bruit émis par les véhicules à l'arrêt — Méthode de contrôle,1982-05-01,1,"['17.140.30','43.020']",ISO/TC 43/SC 1,9599,[4328],"[38663,33292]","['en','fr']",6,"<p>Procedure is intended to check vehicles in use and to determine variations in the noise emission of different parts of the vehicle, which can result from the wear, maladjustment or modification of particular components or the partial or complete removal of noise-reducing devices. Does not apply to agricultural and forestry tractors.</p>"

38663,IS,,ISO 5130:2007,Acoustics — Measurements of sound pressure level emitted by stationary road vehicles,Acoustique — Mesurages du niveau de pression acoustique émis par les véhicules routiers en stationnement,2007-05-31,2,"['17.140.30','43.020']",ISO/TC 43/SC 1,9599,[11130],[74081],['en'],17,"<p>ISO 5130:2007 specifies a test procedure, environment and instrumentation for measuring the exterior sound pressure levels from road vehicles under stationary condition, providing a continuous measure of the sound pressure level over a range of engine speeds. ISO 5130:2007 applies only to road vehicles of categories L, M and N equipped with internal combustion engines.</p><p>ISO 5130:2007 is des

59764,IS,Amd,ISO 5130:2007/Amd 1:2012,Acoustics — Measurements of sound pressure level emitted by stationary road vehicles — Amendment 1,Acoustique — Mesurages du niveau de pression acoustique émis par les véhicules routiers en stationnement — Amendement 1,2012-04-03,2,"['17.140.30','43.020']",ISO/TC 43/SC 1,9599,,[74081],['en'],1,

11132,IS,,ISO 5131:1982,Acoustics — Tractors and machinery for agriculture and forestry — Measurement of noise at the operator's position — Survey method,Acoustique — Tracteurs et matériels agricoles et forestiers — Mesurage du bruit au poste de conduite de l'opérateur — Méthode de contrôle,1982-04-01,1,"['17.140.20','65.060.01']",ISO/TC 43/SC 1,9599,,[20842],"['en','fr']",8,

11133,IS,Amd,ISO 5131:1982/Amd 1:1992,Acoustics — Tractors and machinery for agriculture and forestry — Measurement of noise at the operator's position — Survey method — Amendment 1,Acoustique — Tracteurs et matériels agricoles et forestiers — Mesurage du bruit au poste de conduite de l'opérateur — Méthode de contrôle — Amendement 1,1992-12-03,1,"['17.140.20','65.060.01']",ISO/TC 43/SC 1,9599,,[20842],"['en','fr']",2,

20842,IS,,ISO 5131:1996,Acoustics — Tractors and machinery for agriculture and forestry — Measurement of noise at the operator's position — Survey method,Acoustique — Tracteurs et matériels agricoles et forestiers — Mesurage du bruit au poste de l'opérateur — Méthode de contrôle,1996-08-01,2,"['17.140.20','65.060.01']",ISO/TC 23/SC 2,9599,"[11132,11133]",[66227],"['en','fr']",11,<p>Describes a method for the measurement of the noise at the position of the operator(s) of a tractor or machine used in agriculture and forestry. Provides information to avoid hearing risks of the operators. Replaces the first edition.</p>

11134,IS,,ISO 5135:1984,"Acoustics — Determination of sound power levels of noise from air terminal devices, high/low velocity/pressure assemblies, dampers and valves by measurement in a reverberation room","Acoustique — Détermination des niveaux de puissance acoustique du bruit émis par les bouches d'air, les ensembles à haute/basse vitesse et à haute/basse pression, les registres et les clapets par mesurage en salle réverbérante",1984-08-01,1,['17.140.20'],ISO/TC 43/SC 1,9599,,[22490],"['en','fr']",11,

22490,IS,,ISO 5135:1997,"Acoustics — Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room","Acoustique — Détermination des niveaux de puissance acoustique du bruit émis par les bouches d'air, les unités terminales, les registres et clapets au moyen de mesurages en salle réverbérante",1997-12-18,2,['17.140.20'],ISO/TC 43/SC 1,9599,[11134],[69860],"['en','fr']",14,

11135,IS,,ISO 5136:1990,Acoustics — Determination of sound power radiated into a duct by fans — In-duct method,Acoustique — Détermination de la puissance acoustique rayonnée dans un conduit par des ventilateurs — Méthode en conduit,1990-12-06,1,['91.120.20'],ISO/TC 43/SC 1,9599,,[28316],"['en','fr']",22,"<p>Gives a method for testing ducted fans. Applies to fans which emit steady, broadband, narrow-band and discrete-frequency sound. Applies to air temperatures between -50 °C and +70 °C. The test duct diameter range is from 0,15 m to 2 m. The maximum flow velocity is 30 m/s and the maximum swirl angle is 15°. An example of a method for determining the angle of swirl is given in annex F. The o

22704,IS,Cor,ISO 5136:1990/Cor 1:1993,Acoustics — Determination of sound power radiated into a duct by fans — In-duct method — Technical Corrigendum 1,Acoustique — Détermination de la puissance acoustique rayonnée dans un conduit par des ventilateurs — Méthode en conduit — Rectificatif technique 1,1993-09-02,1,['91.120.20'],ISO/TC 43/SC 1,9599,,[28316],"['en','fr']",1,<p>Replaces the drawing in figure 1.</p>

4574,IS,,ISO 514:1975,Turning tools with carbide tips — Internal tools,Outils de tour à plaquettes en carbures métalliques — Outils d'intérieur,1975-02-01,1,['25.100.10'],ISO/TC 29/SC 9,9599,,[65233],"['en','fr']",2,

11148,IS,,ISO 5141:1978,Propylene for industrial use — Determination of traces of water — Karl Fischer method,Propylène à usage industriel — Dosage des traces d'eau — Méthode de Karl Fischer,1978-07-01,1,['71.080.10'],ISO/TC 47,9599,,[12450],"['en','fr']",5,

11149,IS,,ISO 5142:1977,Sodium sulphate for industrial use — Determination of sodium sulphate content — Gravimetric method,Sulfate de sodium à usage industriel — Détermination de la teneur en sulfate de sodium — Méthode gravimétrique,1977-12-01,1,['71.060.50'],ISO/TC 47,9599,,[11150],"['en','fr']",3,"<p>Applicable to products in which not all impurities are known or determined. The methods specified in ISO 3237 cannot be applied. The principle consists in dissolution of a test portion, removal of insoluble matter, iron, aluminium and calcium from the solution and evaporation to dryness in the presence of sulphuric acid. Heating and weighing of the total amount. Calculation of the sodium sulp

11151,IS,,ISO 5143:1977,Sodium carbonate for industrial use — Determination of sulphur compounds content — Method by reduction and titrimetry,Carbonate de sodium à usage industriel — Dosage des composés soufrés — Méthode par réduction et titrimétrie,1977-11-01,1,['71.060.50'],ISO/TC 47,9599,,[11152],"['en','fr']",6,"<p>Applicable to products having a S compounds content, expressed as sulphate, of equal to or more than 5 mg/kg. Bases of progressive neutralization, with evolution of carbon dioxide, by adding slowly a mixture of hydriodic acid and hypophosphoruos acid. Reduction of the compounds to hydrogen sulphide by heating. Distilation of the hydrogen sulfide, entrainment in a flow of oxyge

11153,IS,,ISO 5144:1977,Alpine skis — Binding mounting area,Skis alpins — Zone de montage de la fixation,1977-11-01,1,['97.220.20'],ISO/TC 83/SC 4,9599,,[15520],['en'],2,

11154,IS,,ISO 5145:1990,Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning,Raccords de sortie de robinets de bouteilles à gaz et mélanges de gaz — Choix et dimensionnement,1990-02-22,1,['23.020.35'],ISO/TC 58/SC 2,9599,,[35500],"['en','fr']",22,<p>Establishes practical criteria for determining valve outlet connections for gas cylinders of a capacity not greater than 150 l. Applies particullary to countries having neither standards nor regulations and to new gases developed for industrial use. I does not apply to connections used for cryogenic gas groups; annex B deals with connections; double-faucet non-interchangeable connections are given in annex C. The biblio-

35500,IS,,ISO 5145:2004,Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning,Raccords de sortie de robinets de bouteilles à gaz et mélanges de gaz — Choix et dimensionnement,2004-04-23,2,['23.020.35'],ISO/TC 58/SC 2,9599,[11154],[54940],['en'],29,<p>ISO 5145:2004 establishes practical criteria for determining valve outlet connections for gas cylinders.</p><p>It applies to the selection of gas cylinder valve outlet connections and specifies the dimensions of a number of them.</p><p>ISO 5145:2004 does not apply to connections used for cryogenic gas withdrawal or gases for breathing equipment which are the subject of other International Standards.</p>

41833,IS,Amd,ISO 5145:2004/Amd 1:2006,Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning — Amendment 1: Cylinder valve outlets for gases for medical use,Raccords de sortie de robinets de bouteilles à gaz et mélanges de gaz — Choix et dimensionnement — Amendement 1: Raccords de sortie de robinets de bouteilles à gaz à usage médical,2006-07-05,2,['23.020.35'],ISO/TC 58/SC 2,9599,,[54940],['en'],6,

44815,IS,Amd,ISO 5145:2004/Amd 2:2008,Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning — Amendment 2,Raccords de sortie de robinets de bouteilles à gaz et mélanges de gaz — Choix et dimensionnement — Amendement 2,2008-02-14,2,['23.020.35'],ISO/TC 58/SC 2,9599,,[54940],['en'],8,

54940,IS,,ISO 5145:2014,Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning,Raccords de sortie de robinets de bouteilles à gaz et mélanges de gaz — Choix et dimensionnement,2014-02-27,3,['23.020.35'],ISO/TC 58/SC 2,9599,"[41833,35500,44815]",[69937],"['en','fr']",36,"<p>ISO 5145:2014 establishes practical criteria for determining valve outlet connections for gas cylinders.</p><p>It applies to the selection of gas cylinder valve outlet connections and specifies the dimensions for a number of them.</p><p>It does not apply to connections used for cryogenic gas withdrawal or gases for breathing equipment, which are the subjects of other International Standards.</p>" 54

11155,IS,,ISO 5149:1993,Mechanical refrigerating systems used for cooling and heating — Safety requirements,Systèmes frigorifiques mécaniques utilisés pour le refroidissement et le chauffage — Prescriptions de sécurité,1993-09-23,1,['27.200'],ISO/TC 86/SC 1,9599,[6282],"[54979,54980,55023,54981,40731]","['en','fr']",34,"<p>Specifies the requirements relating to the safety of persons and property for the design, construction, installation and operation of refrigerating systems. Gives a classification of the refrigerating systems. Applies to all types of refrigerating systems in which the refrigerant is evaporated and condensed in a closed circuit, including heat pumps and absorption systems,

55023,IS,,ISO 5149-4:2014,"Refrigerating systems and heat pumps — Safety and environmental requirements — Part 4: Operation, maintenance, repair and recovery","Systèmes frigorifiques et pompes à chaleur — Exigences de sécurité et d'environnement — Partie 4: Fonctionnement, maintenance, réparation et récupération",2014-04-09,1,"['27.200','27.080']",ISO/TC 86/SC 1,9599,[11155],[82475],"['en','fr']",23,"<p>ISO 5149-4:2014 specifies requirements for safety and environmental aspects in relation to operation, maintenance and repair of refrigerating systems and the recovery, reuse and disposal of all types of refrigerant, refrigerant oil, heat transfer fluid, refrigerating system and part thereof.<

11156,IS,,ISO 5151:1994,Non-ducted air conditioners and heat pumps — Testing and rating for performance,Climatiseurs et pompes à chaleur non raccordés — Essais et détermination des caractéristiques de performance,1994-12-22,1,"['23.120','27.080']",ISO/TC 86/SC 6,9599,[5238],"[32045,54063,42729]","['en','fr']",43,"<p>Specifies the standard conditions on which the ratings of single-package and split-system non-ducted air conditioners employing air- and water-cooled condensers are based, and the test methods to be applied for determination of the various ratings. Is limited to systems utilizing a single refrigeration circuit and having one evaporator and one condenser. Also specifies the test c

54063,IS,,ISO 5151:2010,Non-ducted air conditioners and heat pumps — Testing and rating for performance,Climatiseurs et pompes à chaleur non raccordés — Essais et détermination des caractéristiques de performance,2010-06-07,2,"['23.120','27.080']",ISO/TC 86/SC 6,9599,[11156],[63409],"['en','fr']",73,<p>ISO 5151:2010 specifies the standard conditions for capacity and efficiency ratings of non-ducted air-cooled air conditioners and non-ducted air to air heat pumps. It is applicable to ducted units rated at less than 8 kW and intended to operate at an external static pressure of less than 25 Pa. ISO 5151:2010 also specifies the test methods for determining the capacity and efficiency ratings.</

80930,IS,,ISO 5154:2022,Decorative metallic coatings for radio wave transmissive application products — Designation and characterization method,Revêtements métalliques décoratifs pour les produits d'application transmettant les ondes radio — Désignation et méthode de caractérisation,2022-07-18,1,['25.220.40'],ISO/TC 107/SC 9,9599,,[86726],['en'],20,"<p>This document specifies the designation and the characterization methods of the decorative metallic coatings of the products for radio wave transmissive application. The designation consists of the transmission loss of the radio wave, the frequency band of the radio wave under consideration, the lightness and hue of the parts, as well as the m

11157,IS,,ISO 5155:1983,Household frozen food storage cabinets and food freezers — Essential characteristics and test methods,Conservateurs ménagers de denrées congelées et congélateurs ménagers — Caractéristiques essentielles et méthodes d'essai,1983-12-01,1,['97.040.30'],ISO/TC 86,9599,,[11158],"['en','fr']",23,

11158,IS,,ISO 5155:1995,Household refrigerating appliances — Frozen food storage cabinets and food freezers — Characteristics and test methods,Appareils de réfrigération à usage ménager — Conservateurs de denrées congelées et congélateurs — Caractéristiques et méthodes d'essai,1995-11-16,2,['97.040.30'],ISO/TC 86,9599,[11157],[27428],"['en','fr']",39,<p>Specifies the essential characteristics for household frozen food storage cabinets and food freezers and lays down the methods for the checking of these characteristics. The tests described are type tests. Does not apply to low-temperature compartments or freezer compartments incorporated in refrigerators. Electrical and mechanical safety req

4576,IS,,ISO 516:1973,Photography — Still cameras — Shutter exposure-time markings,Photographie — Appareils de prises de vues — Marquage des durées d'exposition sur les obturateurs,1973-10-01,1,['37.040.10'],ISO/TC 42,9599,,[4577],"['en','fr']",1,

4577,IS,,ISO 516:1986,Photography — Camera shutters — Timing,Photographie — Obturateurs d'appareils photographiques — Durée d'exposition,1986-12-11,2,['37.040.10'],ISO/TC 42,9599,[4576],[20176],"['en','fr']",11,

20176,IS,,ISO 516:1999,Photography — Camera shutters — Timing,Photographie — Obturateurs d'appareils photographiques — Durée d'exposition,1999-08-26,3,['37.040.10'],ISO/TC 42,9599,[4577],[70966],['en'],18,

11159,IS,,ISO 5160-1:1979,Commercial refrigerated cabinets — Technical specifications — Part 1: General requirements,Meubles frigorifiques commerciaux — Spécifications techniques — Partie 1: Exigences générales,1979-10-01,1,['97.130.20'],ISO/TC 86,9599,,"[37028,37029]","['en','fr']",6,<p>Provides guidance in the selection and use of materials and specifies the marking and performance requirements for commercial refrigerated cabinets intended for the sale and/or display of food products. Is to be read in conjunction with ISO 5160/2 which covers in detail the requirements for cabinets of specific type or intended for particular applications.</p>

11160,IS,,ISO 5160-2:1980,Commercial refrigerated cabinets — Technical specifications — Part 2: Particular requirements,Meubles frigorifiques commerciaux — Spécifications techniques — Partie 2: Exigences particulières,1980-09-01,1,['97.130.20'],ISO/TC 86,9599,,"[37028,37029]","['en','fr']",1,"<p>Specifies the method of classification and particular requirements for commercial refrigerated display cabinets. Is complementary to ISO 5160-1. Four classes of cabinets are dovered, determined by one or more of the following temperatures (see ISO 1992-3): maximum temperature, minimum temperature, and mean temperature.</p>"

11161,IS,,ISO 5163:1977,Motor and aviation-type fuels — Determination of knock characteristics — Motor method,Carburants pour moteur automobile et aviation — Détermination des caractéristiques anti-détonantes — Méthode 'Moteur',1977-06-01,1,['75.160.20'],ISO/TC 28,9599,,[11162],['en'],2,

11162,IS,,ISO 5163:1990,Motor and aviation-type fuels — Determination of knock characteristics — Motor method,Carburants pour moteur automobile et aviation — Détermination des caractéristiques antidétonantes — Méthode 'Moteur',1990-12-13,2,['75.160.20'],ISO/TC 28,9599,[11161],"[27590,40725]","['en','fr']",1,"<p>Covers the determination of characteristics of motor and aviation-type gasolines, intended for use in spark-ignition engines. The knock characteristics of motor gasolines are reported in terms of ASTM/IP motor octane numbers, those of aviation-method gasolines in terms of aviation-method octane numbers below 100 and aviation-method performance numbers above 100. The test method shall

40725,IS,,ISO 5163:2005,Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method,Produits pétroliers — Détermination des caractéristiques antidétonantes des carburants pour moteurs automobile et aviation — Méthode moteur,2005-06-10,3,['75.160.20'],ISO/TC 28,9599,"[11162,41412]",[61715],"['en','fr','ru']",19,"<p>ISO 5163:2005 establishes the rating of liquid spark-ignition engine fuel in terms of an arbitrary scale of octane numbers using a standard single-cylinder, four-stroke cycle, variable-compression ratio, carburetted, CFR engine operated at constant speed. Motor octane number (MON) provides a measure of the knock characteristics of motor fu

51282,IS,Cor,ISO 5163:2005/Cor 1:2008,Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method — Technical Corrigendum 1,Produits pétroliers — Détermination des caractéristiques antidétonantes des carburants pour moteurs automobile et aviation — Méthode moteur — Rectificatif technique 1,2008-03-18,3,['75.160.20'],ISO/TC 28,9599,,[61715],"['en','fr']",1,

11163,IS,,ISO 5164:1977,Motor fuels — Determination of knock characteristics — Research method,Carburants pour moteur automobile — Détermination des caractéristiques anti-détonantes — Méthode 'Recherche',1977-06-01,1,['75.160.20'],ISO/TC 28,9599,,[11164],"['en','fr']",2,

11164,IS,,ISO 5164:1990,Motor fuels — Determination of knock characteristics — Research method,Carburants pour moteur automobile — Détermination des caractéristiques antidétonantes — Méthode 'Recherche',1990-12-13,2,['75.160.20'],ISO/TC 28,9599,[11163],"[27591,40724]","['en','fr']",1,"<p>Includes the determination, in terms of ASTM-IP research octane numbers, of the knock characteristics of motor gasolines intended for use in spark-ignition engines. The test method shall be that specified in ANSI/ASTM 2699-86.</p>"

40724,IS,,ISO 5164:2005,Petroleum products — Determination of knock characteristics of motor fuels — Research method,Produits pétroliers — Détermination des caractéristiques antidétonantes des carburants pour moteurs automobile — Méthode recherche,2005-06-10,3,['75.160.20'],ISO/TC 28,9599,"[41413,11164]",[61716],"['en','fr','ru']",18,"<p>ISO 5164:2005 establishes the rating of liquid spark-ignition engine fuel in terms of an arbitrary scale of octane numbers using a standard single cylinder, four-stroke cycle, variable compression ratio, carburetted, CFR engine operated at constant speed. Research octane number (RON) provides a measure of the knock characteristics of motor fuels in automotiv

11165,IS,,ISO 5165:1977,Diesel fuels — Determination of ignition quality — Cetane method,Carburants pour moteur diesel — Détermination de la qualité d'inflammabilité — Méthode cétane,1977-06-01,1,['75.160.20'],ISO/TC 28,9599,,[11166],"['en','fr']",2,

11166,IS,,ISO 5165:1992,Diesel fuels — Determination of ignition quality — Cetane method,Carburants pour moteurs diesel — Détermination de la qualité d'inflammabilité — Méthode cétane,1992-07-16,2,['75.160.20'],ISO/TC 28,9599,[11165],[24854],"['en','fr']",6,

24854,IS,,ISO 5165:1998,Petroleum products — Determination of the ignition quality of diesel fuels — Cetane engine method,Produits pétroliers — Détermination de la qualité d'inflammabilité des carburants pour moteurs diesel — Méthode cétane,1998-02-26,3,['75.160.20'],ISO/TC 28,9599,[11166],[67911],"['en','fr']",15,

67911,IS,,ISO 5165:2017,Petroleum products — Determination of the ignition quality of diesel fuels — Cetane engine method,Produits pétroliers — Détermination de la qualité d'inflammabilité des carburants pour moteurs diesel — Méthode cétane,2017-12-13,4,['75.160.20'],ISO/TC 28,9599,[24854],[76906],"['en','fr']",20,"<p>ISO 5165:2017 establishes the rating of diesel fuel oil in terms of an arbitrary scale of cetane numbers (CNs) using a standard single cylinder, four-stroke cycle, variable compression ratio, indirect injected diesel engine. The CN provides a measure of the ignition characteristics of diesel fuel oil in compression ignition engines. The CN is determined at constant speed in a p

11169,IS,,ISO 5167-1:1991,"Measurement of fluid flow by means of pressure differential devices — Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full","Mesure de débit des fluides au moyen d'appareils déprimogènes — Partie 1: Diaphragmes, tuyères et tubes de Venturi insérés dans des conduites en charge de section circulaire",1991-12-12,1,['17.120.10'],ISO/TC 30/SC 2,9599,"[11168,4617]",[28064],"['en','fr']",61,<p>Specifies the geometry and method of use (installation and operating conditions). Gives necessary information for calculating the flow-rate and its associated uncertainty. Applies only to devices in which the flow remains subsoni

27895,IS,Amd,ISO 5167-1:1991/Amd 1:1998,"Measurement of fluid flow by means of pressure differential devices — Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full — Amendment 1","Mesure de débit des fluides au moyen d'appareils déprimogènes — Partie 1: Diaphragmes, tuyères et tubes de Venturi insérés dans des conduites en charge de section circulaire — Amendement 1",1998-03-26,1,['17.120.10'],ISO/TC 30/SC 2,9599,,[28064],"['en','fr']",16,

27934,IS,Cor,ISO 5167-1:1991/Cor 1:1997,"Measurement of fluid flow by means of pressure differential devices — Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full — Technical Corrigendum 1: (Applies to French version only)","Mesure de débit des fluides au moyen d'appareils déprimogènes — Partie 1: Diaphragmes, tuyères et tubes de Venturi insérés dans des conduites en charge de section circulaire — Rectificatif technique 1",1997-01-30,1,['17.120.10'],ISO/TC 30/SC 2,9599,,[28064],['fr'],,

28064,IS,,ISO 5167-1:2003,Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 1: General principles and requirements,Mesure de débit des fluides au moyen d'appareils déprimogènes insérés dans des conduites en charge de section circulaire — Partie 1: Principes généraux et exigences générales,2003-02-24,2,['17.120.10'],ISO/TC 30/SC 2,9599,"[27895,27934,11169]",[79179],"['en','fr']",33,"<p>ISO 5167-1:2003 defines terms and symbols and establishes the general principles for methods of measurement and computation of the flowrate of fluid flowing in a conduit by means of pressure differential devices (orifice plates, n

11168,IS,,ISO 5167:1980,"Measurement of fluid flow by means of orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full","Mesure de débit des fluides au moyen de diaphragmes, tuyères et tubes de Venturi insérés dans des conduites en charge de section circulaire",1980-02-01,1,['17.120.10'],ISO/TC 30,9599,"[5069,4617]",[11169],"['en','fr']",65,

30190,IS,,ISO 5167-2:2003,Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 2: Orifice plates,Mesure de débit des fluides au moyen d'appareils déprimogènes insérés dans des conduites en charge de section circulaire — Partie 2: Diaphragmes,2003-02-24,1,['17.120.10'],ISO/TC 30/SC 2,9599,,[79180],"['en','fr']",47,"<p>ISO 5167-2:2003 specifies the geometry and method of use (installation and operating conditions) of orifice plates when they are inserted in a conduit running full to determine the flow-rate of the fluid flowing in the conduit.</p><p>It also provides background information for calculating the flow-rat

30191,IS,,ISO 5167-3:2003,Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 3: Nozzles and Venturi nozzles,Mesure de débit des fluides au moyen d'appareils déprimogènes insérés dans des conduites en charge de section circulaire — Partie 3: Tuyères et Venturi-tuyères,2003-02-24,1,['17.120.10'],ISO/TC 30/SC 2,9599,,[75531],"['en','fr']",30,"<p>ISO 5167-3:2003 specifies the geometry and method of use (installation and operating conditions) of nozzles and Venturi nozzles when they are inserted in a conduit running full to determine the flow-rate of the fluid flowing in the conduit.</p><p>ISO 5167-3:2003 also provid

75531,IS,,ISO 5167-3:2020,Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 3: Nozzles and Venturi nozzles,Mesurage du débit des fluides au moyen d'appareils déprimogènes insérés dans des conduites en charge de section circulaire — Partie 3: Tuyères et Venturi-tuyères,2020-08-07,2,['17.120.10'],ISO/TC 30/SC 2,9599,[30191],[84845],"['en','fr']",43,"<p>This document specifies the geometry and method of use (installation and operating conditions) of nozzles and Venturi nozzles when they are inserted in a conduit running full to determine the flowrate of the fluid flowing in the conduit.</p><p>This document also pr