Withdrawn and superseded ISO standards — page 127 of 246

59268,IS,,ISO 4993:2015,Steel and iron castings — Radiographic testing,Pièces moulées en acier ou en fonte — Contrôle radiographique,2015-09-08,3,"['77.040.20','77.140.80']",ISO/TC 17/SC 11,9599,[38863],[84184],['en'],14,"<p>ISO 4993:2015 specifies the general requirements for the radiography of steel and iron castings by means of X-rays or gamma-rays, in accordance with procedures given in ISO 5579 and ISO 19232.</p>"

10998,IS,,ISO 4995:1978,Hot-rolled steel sheet of structural quality,Tôles en acier de construction laminées à chaud,1978-02-01,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[10999],"['en','fr']",10,

10999,IS,,ISO 4995:1991,Hot-rolled steel sheet of structural quality,Tôles en acier de construction laminées à chaud,1991-04-18,2,['77.140.50'],ISO/TC 17/SC 12,9599,[10998],[11000],"['en','fr']",9,

11000,IS,,ISO 4995:1993,Hot-rolled steel sheet of structural quality,Tôles en acier de construction laminées à chaud,1993-10-28,3,['77.140.50'],ISO/TC 17/SC 12,9599,[10999],[30952],"['en','fr']",9,"<p>Applies to steel sheet of structural quality in the grades HR235, HR275 and HR355, usually without the use of microalloying elements, produced in thicknesses from 1,6 mm to 6 mm and widths of 600 mm and over. Specifies conditions of manufacture (steelmaking, chemical composition, chemical analysis, weldability, application, mechanical properties, surface condition), dimensional tolerances, sampling, mechanical property tests (tensile test, bend test), retests, resubmission, workmanship, inspect

30952,IS,,ISO 4995:2001,Hot-rolled steel sheet of structural quality,Tôles en acier de construction laminées à chaud,2001-08-30,4,['77.140.50'],ISO/TC 17/SC 12,9599,[11000],[45024],"['en','fr']",12,

45024,IS,,ISO 4995:2008,Hot-rolled steel sheet of structural quality,Tôles en acier de construction laminées à chaud,2008-08-11,5,['77.140.50'],ISO/TC 17/SC 12,9599,[30952],[64678],"['en','ru']",8,"<p>ISO 4495:2008 applies to hot-rolled steel sheet of structural quality (grades HR235, HR275 and HR355; classes B and D), usually prepared without the use of microalloying elements. The product is intended for structural purposes where particular mechanical properties are required. It is generally used in the delivered condition and is intended for bolted, riveted or welded structures. This product is produced on a wide strip mill, not a plate mill.</p><p>ISO 4495:2008 does not cover steels inten

11001,IS,,ISO 4996:1978,Hot rolled steel sheet of high yield stress structural quality,Tôles laminées à chaud en acier de construction à haute limite d'élasticité,1978-02-01,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[11002],"['en','fr']",10,

11002,IS,,ISO 4996:1991,Hot-rolled steel sheet of high yield stress structural quality,Tôles laminées à chaud en acier de construction à haute limite d'élasticité,1991-04-18,2,['77.140.50'],ISO/TC 17/SC 12,9599,[11001],[27822],"['en','fr']",9,

27822,IS,,ISO 4996:1999,Hot-rolled steel sheet of high yield stress structural quality,Tôles laminées à chaud en acier de construction à haute limite d'élasticité,1999-09-30,3,['77.140.50'],ISO/TC 17/SC 12,9599,[11002],[42300],['en'],11,

42300,IS,,ISO 4996:2007,Hot-rolled steel sheet of high yield stress structural quality,Tôles laminées à chaud en acier de construction à haute limite d'élasticité,2007-03-06,4,['77.140.50'],ISO/TC 17/SC 12,9599,[27822],[65586],['en'],8,"<p>ISO 4996:2007 applies to hot-rolled steel sheet of high yield stress structural quality with the use of microalloying elements. The product is intended for structural purposes where particular mechanical properties are required. It is generally used in the delivered condition and is intended for structures that may include bolting, riveting and welding.</p><p>ISO 4996:2007 does not cover steel intended for boilers or pressure vessels, steels designated as

11003,IS,,ISO 4997:1978,Cold-reduced steel sheet of structural quality,Tôles en acier de construction laminées à froid,1978-02-01,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[11004],"['en','fr']",10,

11004,IS,,ISO 4997:1991,Cold-reduced steel sheet of structural quality,Tôles en acier de construction laminées à froid,1991-04-18,2,['77.140.50'],ISO/TC 17/SC 12,9599,[11003],[27823],"['en','fr']",8,

27823,IS,,ISO 4997:1999,Cold-reduced steel sheet of structural quality,Tôles en acier de construction laminées à froid,1999-03-11,3,['77.140.50'],ISO/TC 17/SC 12,9599,[11004],[42301],"['en','fr']",12,

42301,IS,,ISO 4997:2007,Cold-reduced carbon steel sheet of structural quality,"Tôles en acier au carbone laminées à froid, de qualité destinée à la construction",2007-03-09,4,['77.140.50'],ISO/TC 17/SC 12,9599,[27823],[64676],['en'],8,"<p>ISO 4997:2007 applies to cold-reduced steel sheet of structural quality in grades CR220, CR250, CR320 and CH550, usually without the use of microalloying elements. The product is intended for structures that may include bolting, riveting and welding. It is generally used in the delivered condition for fabricating purposes, such as bending, forming or welding.</p><p>ISO 4997:2007 does not cover steels designated as commercial quality or drawing qualities (co

64676,IS,,ISO 4997:2015,Cold-reduced carbon steel sheet of structural quality,"Tôles en acier au carbone laminées à froid, de qualité destinée à la construction",2015-01-19,5,['77.140.50'],ISO/TC 17/SC 12,9599,[42301],[86693],['en'],8,"<p>ISO 4997:2015 applies to cold-reduced carbon steel sheet of structural quality in grades CR220, CR250, CR320, and CH550, usually without the use of microalloying elements. The product is intended for structures that include bolting, riveting, and welding. It is generally used in the delivered condition for fabricating purposes, such as bending, forming, and welding.</p><p>ISO 4997:2015 does not cover steels designated as commercial quality or drawing qualit

11005,IS,,ISO 4998:1977,Continuous hot-dip zinc-coated carbon steel sheet of structural quality,"Tôles en acier au carbone galvanisées en continu par immersion à chaud, de qualité destinée à la construction",1977-08-01,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[11006],"['en','fr']",12,

11006,IS,,ISO 4998:1991,Continuous hot-dip zinc-coated carbon steel sheet of structural quality,"Tôles en acier au carbone galvanisées en continu par immersion à chaud, de qualité destinée à la construction",1991-04-18,2,['77.140.50'],ISO/TC 17/SC 12,9599,[11005],[22373],"['en','fr']",11,

22373,IS,,ISO 4998:1996,Continuous hot-dip zinc-coated carbon steel sheet of structural quality,"Tôles en acier au carbone galvanisées en continu par immersion à chaud, de qualité destinée à la construction",1996-05-09,3,['77.140.50'],ISO/TC 17/SC 12,9599,[11006],[36021],"['en','fr']",9,<p>Applies to continuous hot-dip zinc-coated carbon steel of structural quality. The products are intended for structural purposes where particular mechanical properties are required. Specifies the mass of zinc-coating on both surfaces. Replaces the second edition.</p>

36021,IS,,ISO 4998:2005,Continuous hot-dip zinc-coated carbon steel sheet of structural quality,"Tôles en acier au carbone galvanisées en continu par immersion à chaud, de qualité destinée à la construction",2005-11-04,4,['77.140.50'],ISO/TC 17/SC 12,9599,[22373],[53480],['en'],13,<p>ISO 4998:2005 applies to continuous hot-dip zinc- and zinc-iron-alloy-coated carbon steel sheet of structural quality.</p>

53480,IS,,ISO 4998:2011,Continuous hot-dip zinc-coated carbon steel sheet of structural quality,"Tôles en acier au carbone galvanisées en continu par immersion à chaud, de qualité destinée à la construction",2011-01-06,5,['77.140.50'],ISO/TC 17/SC 12,9599,[36021],[63647],"['en','ru']",13,"<p>ISO 4998:2011 applies to continuous hot‑dip zinc‑ and zinc‑iron‑alloy‑coated carbon steel sheet of structural quality.</p><p>The product is intended for applications where resistance to corrosion is of prime importance.</p><p>The steel sheet is produced in a number of grades, coating mass, ordering conditions and surface treatments.</p><p>ISO 4998:2011 does not cover steels designated as commercial quali

63647,IS,,ISO 4998:2014,Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality,"Tôles en acier au carbone revêtues de zinc ou d'un alliage zinc-fer en continu par immersion à chaud, de qualité destinée à la construction",2014-06-16,6,['77.140.50'],ISO/TC 17/SC 12,9599,[53480],[84171],"['en','ru']",13,"<p>ISO 4998:2014 specifies continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality. The product is intended for applications where resistance to corrosion is of prime importance. The steel sheet is produced in a number of grades, coating masses, ordering conditions, and surface treatments.</p>"

11007,IS,,ISO 4999:1978,Continuous hot-dip terne (lead alloy) coated cold reduced carbon steel sheet of commercial and drawing qualities,"Tôles en acier au carbone laminées à froid, revêtues d'un alliage au plomb en continu par immersion à chaud, de qualité commerciale et pour emboutissage",1978-08-01,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[11008],['en'],16,

11008,IS,,ISO 4999:1991,Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial and drawing qualities,"Tôles en acier au carbone laminées à froid, revêtues d'un alliage au plomb en continu par immersion à chaud, de qualité commerciale et pour emboutissage",1991-04-18,2,['77.140.50'],ISO/TC 17/SC 12,9599,[11007],[27824],"['en','fr']",14,

27824,IS,,ISO 4999:1999,Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial drawing and structural qualities,"Tôles en acier au carbone laminées à froid, revêtues d'un alliage au plomb en continu par immersion à chaud, de qualités commerciale, pour emboutissage et de construction",1999-03-11,3,['77.140.50'],ISO/TC 17/SC 12,9599,[11008],[37774],"['en','fr']",21,

37774,IS,,ISO 4999:2005,"Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities","Tôles en acier au carbone laminées à froid, revêtues d'un alliage au plomb en continu par immersion à chaud, de qualités commerciale, pour emboutissage et de construction",2005-11-04,4,['77.140.50'],ISO/TC 17/SC 12,9599,[27824],[53481],['en'],19,"<p>ISO 4999:2005 applies to cold-reduced carbon steel sheet of commercial, drawing and structural qualities coated by a continuous hot-dip terne (lead alloy) coating process. It includes the group of products commonly known as terne plate or terne sheets (or in the U.S.A. as terne coated).</p>" 37775

53481,IS,,ISO 4999:2011,"Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities","Tôles en acier au carbone laminées à froid, revêtues d'un alliage au plomb en continu par immersion à chaud, de qualités commerciale, pour emboutissage et de construction",2011-01-20,5,['77.140.50'],ISO/TC 17/SC 12,9599,[37774],[63644],"['en','ru']",20,"<p>ISO 4999:2011 is applicable to cold-reduced carbon steel sheet of commercial, drawing and structural qualities coated by a continuous hot‑dip terne (lead alloy) coating process. It includes the group of products commonly known as terne plate or terne sheets (or in the USA as terne coated).<

3573,IS,,ISO 5-1:1984,"Photography — Density measurements — Part 1: Terms, symbols and notations","Photographie — Mesurage des densités — Partie 1: Termes, symboles et notations",1984-03-01,1,['37.040.20'],ISO/TC 42,9599,[3571],[52913],"['en','fr','ru']",21,"<p>Specifies definitions, symbols, notations and a coordinate system for applications in photography and radiometry to describe the geometric factors affecting optical transmission and reflection measures. Provides a system for describing methods of measuring or specifying the transmission and reflection properties of photographic materials.</p>"

3571,IS,,ISO 5:1974,Photography — Determination of diffuse transmission density,Photographie — Détermination de la densité optique en lumière diffuse,1974-10-01,1,['37.040.20'],ISO/TC 42,9599,,[3573],"['en','fr']",19,

3574,IS,,ISO 5-2:1985,Photography — Density measurements — Part 2: Geometric conditions for transmission density,Photographie — Mesurage des densités — Partie 2: Conditions géométriques pour la densité instrumentale par transmission,1985-06-13,2,['37.040.20'],ISO/TC 42,9599,,"[20037,28004]","['en','fr']",5,

20037,IS,,ISO 5-2:1991,Photography — Density measurements — Part 2: Geometric conditions for transmission density,Photographie — Mesurage des densités — Partie 2: Conditions géométriques pour la densité instrumentale par transmission,1991-12-18,3,['37.040.20'],ISO/TC 42,9599,[3574],[28004],"['en','fr']",7,

28004,IS,,ISO 5-2:2001,Photography — Density measurements — Part 2: Geometric conditions for transmission density,Photographie — Mesurage des densités — Partie 2: Conditions géométriques pour la densité instrumentale par transmission,2001-06-14,4,['37.040.20'],ISO/TC 42,9599,"[20037,3574]",[52914],['en'],13,

20101,IS,,ISO 5-3:1984,Photography — Density measurements — Part 3: Spectral conditions,Photographie — Mesurage des densités — Partie 3: Conditions spectrales,1984-08-16,1,['37.040.20'],ISO/TC 42,9599,,[20036],"['en','fr']",10,

20036,IS,,ISO 5-3:1995,Photography — Density measurements — Part 3: Spectral conditions,Photographie — Mesurage des densités — Partie 3: Conditions spectrales,1995-11-09,2,['37.040.20'],ISO/TC 42,9599,[20101],[52915],['en'],19,<p>Specifies spectral conditions for the measurement of several types of densities used in photographic image reproduction. Has been expanded to include additional spectral types. Replaces the first edition which has been technically revised.</p>

3578,IS,,ISO 5-4:1983,Photography — Density measurements — Part 4: Geometric conditions for reflection density,Photographie — Mesurage des densités — Partie 4: Conditions géométriques pour la densité instrumentale par réflexion,1983-11-01,1,['37.040.20'],ISO/TC 42,9599,,[20051],"['en','fr']",4,

20051,IS,,ISO 5-4:1995,Photography — Density measurements — Part 4: Geometric conditions for reflection density,Photographie — Mesurage des densités — Partie 4: Conditions géométriques pour la densité instrumentale par réflexion,1995-05-11,2,['37.040.20'],ISO/TC 42,9599,[3578],[52916],['en'],7,<p>Cancels and replaces the first edition (1983). Specifies the geometric conditions for measuring the reflection density of photographic and graphic art materials. Specifies illumination at all azimuth angles. Does not cover those situations where light has been deliberately polarized. Also applicable to the measurement of these characteristics for other materials.</p>

36417,IS,,ISO 500-1:2004,"Agricultural tractors — Rear-mounted power take-off types 1, 2 and 3 — Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone","Tracteurs agricoles — Prises de force montées à l'arrière des types 1, 2 et 3 — Partie 1: Spécifications générales, exigences de sécurité, dimensions du bouclier protecteur et de la zone de dégagement",2004-02-03,1,['65.060.10'],ISO/TC 23/SC 4,9599,[4554],[56698],"['en','fr']",5,"<p>ISO 500-1:2004 gives general specifications, including speeds, safety requirements, the dimensions for the master shield and clearance zones for rear-mounted power take-offs (PTOs) of Types 1, 2 and 3 on agricultural

42198,IS,Cor,ISO 500-1:2004/Cor 1:2005,"Agricultural tractors — Rear-mounted power take-off types 1, 2 and 3 — Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone — Technical Corrigendum 1","Tracteurs agricoles — Prises de force montées à l'arrière des types 1, 2 et 3 — Partie 1: Spécifications générales, exigences de sécurité, dimensions du bouclier protecteur et de la zone de dégagement — Rectificatif technique 1",2005-04-25,1,['65.060.10'],ISO/TC 23/SC 4,9599,,[56698],"['en','fr']",2,

4553,IS,,ISO 500:1979,Agricultural tractors — Power take-off and drawbar — Specification,Tracteurs agricoles — Prise de force et barre d'attelage — Spécifications,1979-02-01,1,['65.060.10'],ISO/TC 23/SC 4,9599,,[4554],"['en','fr']",9,

4554,IS,,ISO 500:1991,"Agricultural tractors — Rear-mounted power take-off — Types 1, 2 and 3","Tracteurs agricoles — Prises de force montées à l'arrière — Types 1, 2 et 3",1991-03-14,2,['65.060.10'],ISO/TC 23/SC 4,9599,[4553],"[36417,36418,36419]","['en','fr']",13,"<p>This second edition cancels and replaces the first edition (ISO 500:1979), from which drawbar requirements have been deleted. Specifies normative references, types of power take-off (PTO), the clearance zones around the power take-off, other requirements and specifications.</p>"

36419,IS,,ISO 500-3:2004,"Agricultural tractors — Rear-mounted power take-off types 1, 2 and 3 — Part 3: Main PTO dimensions and spline dimensions, location of PTO","Tracteurs agricoles — Prises de force montées à l'arrière des types 1, 2 et 3 — Partie 3: Dimensions principales de la prise de force et dimensions des cannelures, emplacement de la prise de force",2004-02-03,1,['65.060.10'],ISO/TC 23/SC 4,9599,[4554],[56699],"['en','fr']",13,"<p>ISO 500-3:2004 specifies the manufacturing requirements for, and the location of, power take-offs (PTOs) Types 1, 2 and 3 rear-mounted on agricultural tractors.</p>"

11009,IS,,ISO 5000:1980,Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities,"Tôles en acier au carbone laminées à froid, revêtues par immersion à chaud en continu d'une couche d'aluminium-silicium, de qualité commerciale et pour emboutissage",1980-10-01,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[11010],"['en','fr']",13,

11010,IS,,ISO 5000:1993,Continuous hot-dip aluminium/silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities,"Tôles en acier au carbone laminées à froid, revêtues par immersion à chaud en continu d'une couche d'aluminium-silicium, de qualité commerciale et pour emboutissage",1993-11-18,2,['77.140.50'],ISO/TC 17/SC 12,9599,[11009],[30953],"['en','fr']",12,"<p>This product is used principally for heat-resisting applications and also where corrosion resistance and heat are involved. This sheet is produced in the range of thicknesses 0.40 to 3.0 mm inclusive, and in widths of 600 to 1500 mm, supplied in coils and cut lengths. Commercial quality sheet is intended for ge

30953,IS,,ISO 5000:2005,Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities,"Tôles en acier au carbone laminées à froid, revêtues par immersion à chaud en continu d'une couche d'aluminium-silicium, de qualité commerciale et pour emboutissage",2005-01-05,3,['77.140.50'],ISO/TC 17/SC 12,9599,[11010],[53482],['en'],12,<p>ISO 5000:2005 specifies the characteristics of cold-reduced carbon steel sheet of commercial and drawing qualities coated by a continuous hot-dip aluminium-silicon alloy coating process.</p>

53482,IS,,ISO 5000:2011,Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities,"Tôles en acier au carbone laminées à froid, revêtues par immersion à chaud en continu d'une couche d'aluminium-silicium, de qualité commerciale et pour emboutissage",2011-01-06,4,['77.140.50'],ISO/TC 17/SC 12,9599,[30953],[73348],"['en','ru']",15,"<p>ISO 5000:2011 specifies the characteristics of cold-reduced carbon steel sheet of commercial and drawing qualities coated by a continuous hot-dip aluminium-silicon alloy coating process.</p><p>Aluminium-silicon-coated steel sheets are used for heat-resisting applications and also where both corrosion and heat r

51297,IS,,ISO 50001:2011,Energy management systems — Requirements with guidance for use,Systèmes de management de l'énergie — Exigences et recommandations de mise en oeuvre,2011-06-09,1,"['03.100.70','27.015']",ISO/TC 301,9599,,[69426],"['en','es','fr','ru']",22,"<p>ISO 50001:2011 specifies requirements for establishing, implementing, maintaining and improving an energy management system, whose purpose is to enable an organization to follow a systematic approach in achieving continual improvemen

60088,IS,,ISO 50002:2014,Energy audits — Requirements with guidance for use,Audits énergétiques — Exigences et recommandations de mise en oeuvre,2014-06-23,1,['27.015'],ISO/TC 301,9599,,[83645],"['ar','en','es','ru']",22,"<p>ISO 50002:2014 specifies the process requirements for carrying out an energy audit in relation to energy performance. It is applicable to all types of establishments and organizations, and all forms of energy and energy use.</p><p>ISO 50002:2014 specifies the principles of carrying out energy audits, requirements for the common processes during energy audits, and deliverables for energy audits.</p><p>ISO 50002:2014 does not address the requirements for selection and eval

60089,IS,,ISO 50003:2014,Energy management systems — Requirements for bodies providing audit and certification of energy management systems,Systèmes de management de l'énergie — Exigences pour les organismes procédant à l'audit et à la certification de systèmes de management de l'énergie,2014-10-14,1,"['03.120.20','27.015']",ISO/TC 301,9599,,[77575],"['ar','en','es','fr','ru']",18,"<p>ISO 50003:2014 specifies requirements for competence, consistency and impartiality in the auditing and certification of energy management systems (EnMS) for bodies providing these services. In order to ensure the effectiveness of EnMS auditing, ISO 50003:2014 addresses the auditing process, competence requireme

60041,IS,,ISO 50004:2014,"Energy management systems — Guidance for the implementation, maintenance and improvement of an energy management system","Systèmes de management de l'énergie — Lignes directrices pour la mise en oeuvre, la maintenance et l'amélioration d'un système de management de l'énergie",2014-12-15,1,"['03.100.70','27.015']",ISO/TC 301,9599,,[74863],"['en','ru']",42,"<p>ISO 50004:2014 provides practical guidance and examples for establishing, implementing, maintaining and improving an energy management system (EnMS) in accordance with the systematic approach of ISO 50001. The guidance in ISO 50004:2014 is applicable to any organization, regardless of its size, type, location or

51869,IS,,ISO 50006:2014,Energy management systems — Measuring energy performance using energy baselines (EnB) and energy performance indicators (EnPI) — General principles and guidance,Systèmes de management de l'énergie — Mesurage de la performance énergétique à l'aide des situations énergétiques de référence (SER) et des indicateurs de performance énergétique (IPÉ) — Principes généraux et lignes directrices,2014-12-15,1,['27.015'],ISO/TC 301,9599,,[79367],"['en','fr','ru']",33,"<p>ISO 50006:2014 provides guidance to organizations on how to establish, use and maintain energy performance indicators (EnPIs) and energy baselines (EnBs) as part of the process of measuring energy performance.</

11011,IS,,ISO 5001:1980,Cold-reduced carbon steel sheet for vitreous enamelling,Tôles en acier au carbone laminées à froid pour émaillage par vitrification,1980-04-01,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[11012],"['en','fr']",13,

11012,IS,,ISO 5001:1993,Cold-reduced carbon steel sheet for vitreous enamelling,Tôles en acier au carbone laminées à froid pour émaillage par vitrification,1993-11-18,2,['77.140.50'],ISO/TC 17/SC 12,9599,[11011],[27956],"['en','fr']",10,

27956,IS,,ISO 5001:1999,Cold-reduced carbon steel sheet for vitreous enamelling,Tôles en acier au carbone laminées à froid pour émaillage par vitrification,1999-06-24,3,['77.140.50'],ISO/TC 17/SC 12,9599,[11012],[42303],"['en','fr']",12,

42303,IS,,ISO 5001:2007,Cold-reduced carbon steel sheet for vitreous enamelling,Tôles en acier au carbone laminées à froid pour émaillage par vitrification,2007-06-25,4,['77.140.50'],ISO/TC 17/SC 12,9599,[27956],[58059],['en'],8,"<p>ISO 5001:2007 specifies requirements for cold-reduced carbon steel sheet of commercial and drawing qualities for vitreous enamelling, where the surface of the sheet and chemical composition of the base metal are of prime importance.</p>"

11013,IS,,ISO 5002:1982,Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities,Tôles en acier au carbone laminées à chaud et à froid revêtues par zingage électrolytique (tôles électro-zinguées) de qualité commerciale et pour emboutissage,1982-11-01,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[27957],"['en','fr']",12,

27957,IS,,ISO 5002:1999,Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities,"Tôles en acier au carbone laminées à chaud et à froid, revêtues par zingage électrolytique (tôles électro-zinguées) de qualité commerciale et pour emboutissage",1999-06-17,2,['77.140.50'],ISO/TC 17/SC 12,9599,[11013],[42304],"['en','fr']",18,

42304,IS,,ISO 5002:2008,Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities,"Tôles en acier au carbone laminées à chaud et à froid, revêtues par zingage électrolytique (tôles électro-zinguées) de qualité commerciale et pour emboutissage",2008-04-24,3,['77.140.50'],ISO/TC 17/SC 12,9599,[27957],[60588],"['en','ru']",15,"<p>ISO 5002:2008 specifies the characteristics of carbon steel sheet of commercial and drawing qualities in cut length or coil form, zinc coated by electrolytic deposition. Electrolytic zinc-coated sheet is intended for the manufacture of formed or of miscellaneous parts, and can be supplied chemically treated to render it

60588,IS,,ISO 5002:2013,Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities,"Tôles en acier au carbone laminées à chaud et à froid, revêtues par zingage électrolytique (tôles électro-zinguées) de qualité commerciale et pour emboutissage",2013-11-26,4,['77.140.50'],ISO/TC 17/SC 12,9599,[42304],[86692],['en'],15,"<p>ISO 5002:2013 specifies the characteristics of carbon steel sheet of commercial and drawing qualities in cut length or coil form, zinc coated by electrolytic deposition. Electrolytic zinc-coated sheet is intended for the manufacture of formed or of miscellaneous parts, and can be supplied chemically treated to render it more s

11014,IS,,ISO 5003:1980,Flat bottom railway rails and special rail sections for switches and crossings of non-treated steel — Technical delivery requirements,Rails Vignole et profils spéciaux pour aiguillages en acier non traité pour chemins de fer — Spécifications techniques de livraison,1980-11-01,1,['45.080'],ISO/TC 17/SC 15,9599,,[57132],"['en','fr']",26,"<p>Applies to rails with a linear mass of 35 kg/m or more and to special sections used in association with these flat bottom rails. Does not apply, in particular, to grooved rails and check rails. An invitation to tender should normally be accompanied by a definition of the conditions of use and other documents for carrying out the orde

11015,IS,,ISO 5004:1981,Earth-moving machinery — Method of test for the measurement of tool movement time,Engins de terrassement — Méthode d'essai pour le mesurage du temps de mouvement des outils,1981-05-01,1,['53.100'],ISO/TC 127/SC 1,9599,,[11016],"['en','fr']",3,

11018,IS,,ISO 5006-1:1991,Earth-moving machinery — Operator's field of view — Part 1: Test method,Engins de terrassement — Visibilité du conducteur — Partie 1: Méthode d'essai,1991-10-24,1,['53.100'],ISO/TC 127/SC 1,9599,,"[38579,29210]","['en','fr']",11,<p>Specifies a method for determining the masking effect caused by parts of the base machine with equipment as specified by the manufacturer on a visibility test circle around the machine from the eye position point of a seated operator. Annex A is for information only.</p>

11020,IS,,ISO 5006-2:1993,Earth-moving machinery — Operator's field of view — Part 2: Evaluation method,Engins de terrassement — Visibilité du conducteur — Partie 2: Méthode d'évaluation,1993-06-17,1,['53.100'],ISO/TC 127/SC 2,9599,,"[38579,11019]","['en','fr']",6,<p>Specifies a method for evaluating the maskings which may be present on the perimeter. Does not consider evaluation of maskings which may be present with operational movement of working tools. Applies to earth-moving machinery which has a specific operator's station.</p>

38579,IS,,ISO 5006:2006,Earth-moving machinery — Operator's field of view — Test method and performance criteria,Engins de terrassement — Visibilité du conducteur — Méthode d'essai et critères de performance,2006-11-03,1,['53.100'],ISO/TC 127/SC 2,9599,"[11018,11022,11020]",[45609],"['en','fr','ru']",21,"<p>ISO 5006:2006 specifies a static test method for determining and evaluating the operator's visibility on a rectangular 1 m boundary close around the machine and on a 12 m visibility test circle.</p><p>ISO 5006:2006 applies to wheel loaders, skid steer loaders, crawler loaders, backhoe loaders, wheel excavators, crawler excavators, rigid-frame dumpers, articulated frame dumpers, dumpers (f

51482,IS,Cor,ISO 5006:2006/Cor 1:2008,Earth-moving machinery — Operator's field of view — Test method and performance criteria — Technical Corrigendum 1,Engins de terrassement — Visibilité du conducteur — Méthode d'essai et critères de performance — Rectificatif technique 1,2008-06-03,1,['53.100'],ISO/TC 127/SC 2,9599,,[45609],"['en','fr','ru']",1,

11022,IS,,ISO 5006-3:1993,Earth-moving machinery — Operator's field of view — Part 3: Criteria,Engins de terrassement — Visibilité du conducteur — Partie 3: Critères,1993-06-17,1,['53.100'],ISO/TC 127/SC 2,9599,,"[11021,38579]","['en','fr']",2,<p>Specifies visibility acceptance criteria for earth-moving machinery; applies to earth-moving machinery which has a specific operator's station.</p>

11024,IS,,ISO 5007:1990,Agricultural wheeled tractors — Operator's seat — Laboratory measurement of transmitted vibration,Tracteurs agricoles à roues — Siège du conducteur — Mesurage en laboratoire des vibrations transmises,1990-02-15,1,"['65.060.10','13.160']",ISO/TC 23/SC 2,9599,[11023],[26861],"['en','fr']",13,"<p>This first edition cancels and replaces the first edition of the Technical Report ISO/TR 5007:1980. Specifies a method for measuring and evaluating the effectiveness of the seat in reducing the vertical whole-body vibration transmitted to the operator of an tractor. Applies to seats fitted to tractors within specified classes, each class being defined as a group of tractors havi

11025,IS,,ISO 5008:1979,Agricultural wheeled tractors and field machinery — Measurement of whole-body vibration of the operator,Tracteurs et matériels agricoles à roues — Mesurage des vibrations transmises globalement au conducteur,1979-04-01,1,"['65.060.01','13.160']",ISO/TC 23/SC 2,9599,,[1743],"['en','fr']",11,<p>Specifies methods for measuring and reporting the vibration to which the operator of an tractor or other field machine is exposed. The operating conditions of the machine and the ordinates of optional artificial test tracks are also included. Applies when measurements are made under field conditions or where artificial surfaces are used foe the comparison of different models of p

4556,IS,,ISO 501:1981,Coal — Determination of the crucible swelling number,Charbon — Détermination de l'indice de gonflement au creuset,1981-11-01,2,['73.040'],ISO/TC 27,9599,,[33607],"['en','fr']",5,"<p>The sample is heated in a covered crucible under standard conditions to a final temperature of 820 +- 5 °C. The coke button obtained is classified by comparison with the outlines of a set of standard profiles. The number of the profile most closely corresponding to the coke button obtained is the crucible swelling number. Gas or electrical heating may be used. When using an electrically heated apparatus, the results obtained should be the same (within 1/2 unit) as those obtained by the gas h

33607,IS,,ISO 501:2003,Hard coal — Determination of the crucible swelling number,Houille — Détermination de l'indice de gonflement au creuset,2003-11-04,3,['73.040'],ISO/TC 27/SC 5,9599,[4556],[55498],['en'],7,<p>ISO 501:2003 specifies a method of determining the swelling properties of hard coal when heated in a covered crucible.</p>

55498,IS,,ISO 501:2012,Hard coal — Determination of the crucible swelling number,Houille — Détermination de l'indice de gonflement au creuset,2012-08-16,4,['73.040'],ISO/TC 27/SC 5,9599,[33607],[86994],['en'],7,<p>ISO 501:2012 specifies a method for determining the swelling properties of hard coal when heated in a covered crucible. </p><p>The 'crucible swelling number' (CSN) is also known as the 'free swelling index' (FSI).</p>

11026,IS,,ISO 5010:1984,Earth-moving machinery — Rubber-tyred machines — Steering capability,Engins de terrassement — Engins équipés de pneumatiques — Systèmes de direction,1984-08-01,1,['53.100'],ISO/TC 127/SC 2,9599,,[11027],"['en','fr']",10,

11027,IS,,ISO 5010:1992,Earth-moving machinery — Rubber-tyred machines — Steering requirements,Engins de terrassement — Engins équipés de pneumatiques — Systèmes de direction,1992-10-21,2,['53.100'],ISO/TC 127/SC 2,9599,[11026],[45105],"['en','fr']",7,"<p>Specifies steering system tests and performance criteria for evaluating the steering capability of rubber-tyred self-propelled earth-moving machines having a machine speed greater than 20 km/h. Applies to tractors, loaders, back-hoe loaders, excavators, dumpers, tractor-scrapers and graders. For the present, rollers, compactors and pipelayers are excluded.</p>"

45105,IS,,ISO 5010:2007,Earth-moving machinery — Rubber-tyred machines — Steering requirements,Engins de terrassement — Engins équipés de pneumatiques — Systèmes de direction,2007-06-07,3,['53.100'],ISO/TC 127/SC 2,9599,[11027],[68453],"['en','fr']",13,"<p>ISO 5010:2007 specifies steering system tests and performance criteria for evaluating the steering capability of rubber-tyred, self-propelled earth-moving machines having a machine speed, determined in accordance with ISO 6014, greater than 20 km/h.</p><p>It is applicable to dozers, loaders, back-hoe loaders, excavators, dumpers, scrapers and graders equipped with either manual steering, power-assisted steering or fully powered steering sy

11028,IS,,ISO 5011:1988,Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing,Séparateurs aérauliques placés à l'entrée des moteurs à combustion interne et des compresseurs — Essai de rendement,1988-12-29,1,['43.060.20'],ISO/TC 22,9599,,[29006],"['en','fr']",24,

29006,IS,,ISO 5011:2000,Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing,Séparateurs aérauliques placés à l'entrée des moteurs à combustion interne et des compresseurs — Détermination des performances,2000-11-30,2,['43.060.20'],ISO/TC 22,9599,"[11028,20727]",[64762],['en'],39,

64762,IS,,ISO 5011:2014,Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing,Séparateurs aérauliques placés à l'entrée des moteurs à combustion interne et des compresseurs — Détermination des performances,2014-03-21,3,['43.060.20'],ISO/TC 22/SC 34,9599,[29006],[72490],['en'],39,"<p>ISO 5011:2014 establishes and specifies uniform test procedures, conditions, equipment, and a performance report to permit the direct laboratory performance comparison of air cleaners.</p><p>The basic performance characteristics of greatest interest are air flow restriction or differential pressure, dust collection efficiency, dust capacity, and oil carry-over on oil b

68573,IS,Amd,ISO 5011:2014/Amd 1:2018,Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing — Amendment 1,Séparateurs aérauliques placés à l'entrée des moteurs à combustion interne et des compresseurs — Détermination des performances — Amendement 1,2018-03-19,3,['43.060.20'],ISO/TC 22/SC 34,9599,,[72490],['en'],1,

72490,IS,,ISO 5011:2020,Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing,Séparateurs aérauliques placés à l'entrée des moteurs à combustion interne et des compresseurs — Détermination des performances,2020-09-11,4,['43.060.20'],ISO/TC 22/SC 34,9599,"[68573,64762]",[85950],['en'],50,"<p>This document establishes and specifies uniform test procedures, conditions, equipment and a performance report to permit the direct laboratory performance comparison of air cleaners.</p><p>The basic performance characteristics of greatest interest are air flow restriction or differential pressure, dust collection efficiency, dust capacity and oil carry-over on

11031,IS,,ISO 5014:1986,Refractory products — Determination of modulus of rupture at ambient temperature,Produits réfractaires — Détermination du module de rupture par flexion à température ambiante,1986-11-13,2,['81.080'],ISO/TC 33,9599,,[20289],['en'],4,

20289,IS,,ISO 5014:1997,Dense and insulating shaped refractory products — Determination of modulus of rupture at ambient temperature,Produits réfractaires façonnés denses et isolants — Détermination du module de rupture par flexion à température ambiante,1997-06-26,3,['81.080'],ISO/TC 33,9599,[11031],[86769],"['en','fr']",5,

11032,IS,,ISO 5016:1986,Shaped insulating refractory products — Determination of bulk density and true porosity,Produits réfractaires isolants façonnés — Détermination de la masse volumique apparente et de la porosité réelle,1986-06-05,1,['81.080'],ISO/TC 33,9599,,[20290],"['en','fr']",2,

11033,IS,,ISO 5017:1988,"Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity","Produits réfractaires façonnés denses — Détermination de la masse volumique apparente, de la porosité ouverte et de la porosité totale",1988-06-23,1,['81.080'],ISO/TC 33,9599,,[23002],['en'],3,

23002,IS,,ISO 5017:1998,"Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity","Produits réfractaires façonnés denses — Détermination de la masse volumique apparente, de la porosité ouverte et de la porosité totale",1998-07-16,2,['81.080'],ISO/TC 33,9599,[11033],[56179],"['en','fr']",7,

56179,IS,,ISO 5017:2013,"Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity","Produits réfractaires façonnés denses — Détermination de la masse volumique apparente, de la porosité ouverte et de la porosité totale",2013-01-08,3,['81.080'],ISO/TC 33,9599,[23002],[88937],"['en','fr','ru']",7,"<p>ISO 5017:2013 specifies a method for the determination of the bulk density, apparent porosity and true porosity of dense shaped refractory products.</p>"

11039,IS,,ISO 5019-4:1984,Refractory bricks — Dimensions — Part 4: Dome bricks for electric arc furnace roofs,Briques réfractaires : Dimensions — Partie 4: Briques de voûte pour fours électriques,1984-09-01,1,['81.080'],ISO/TC 33,9599,,[11040],"['en','fr']",4,

11042,IS,,ISO 5019-6:1984,Refractory bricks — Dimensions — Part 6: Basic bricks for oxygen steel-making converters,Briques réfractaires — Dimensions — Partie 6: Briques basiques pour convertisseurs à oxygène,1984-09-01,1,['81.080'],ISO/TC 33,9599,,"[36196,40215]","['en','fr']",3,"<p>This part of ISO 5019 specifies the dimensions of basic refractory bricks for use in oxygen steel-making converters. It provides for twelve thicknesses of lining, rising from a minimum of 25 mm to a maximum of 800 mm in steps of 50 mm. For information, the calculated volume of each size of brick is shown in a table, and also the internal diameter of lining for which each size is suitable, if used alone. These dia

4557,IS,,ISO 502:1982,Coal — Determination of caking power — Gray-King coke test,Charbon — Détermination du pouvoir agglutinant — Essai Gray-King,1982-02-01,2,['73.040'],ISO/TC 27/SC 5,9599,,[64983],"['en','fr']",9,"<p>The sample is heated under standard conditions to a final temperature of 600 C. The coke residue obtained is classified by reference to a series of standard residues. If the coke residue produced is so swollen that it fills the crosssection of the retort tube, the determination is repeated with the coal admixed with a suitable quantity of electrode carbon or equivalent material.</p>"

64983,IS,,ISO 502:2015,Coal — Determination of caking power — Gray-King coke test,Charbon — Détermination du pouvoir agglutinant — Essai Gray-King,2015-06-15,3,['73.040'],ISO/TC 27/SC 5,9599,[4557],[86995],['en'],13,<p>ISO 502:2015 specifies a method of assessing the caking power of coal under standard conditions.</p>

11046,IS,,ISO 5024:1976,Petroleum liquids and gases — Measurement — Standard reference conditions,Produits pétroliers liquides et gazeux — Mesurage — Conditions normales de référence,1976-12-01,1,['75.180.30'],ISO/TC 28,9599,,[26561],"['en','fr']",1,

26561,IS,,ISO 5024:1999,Petroleum liquids and liquefied petroleum gases — Measurement — Standard reference conditions,Produits pétroliers liquides et gaz de pétrole liquéfiés — Mesurage — Conditions normales de référence,1999-05-06,2,['75.180.30'],ISO/TC 28/SC 2,9599,[11046],[65049],"['en','fr']",1,

11047,IS,,ISO 5025:1978,Textile glass — Woven fabric — Determination of width and length,Verre textile — Tissus — Détermination de la largeur et de la longueur,1978-04-01,1,['59.100.10'],ISO/TC 61/SC 13,9599,,[25787],"['en','fr']",1,

25787,IS,,ISO 5025:1997,Reinforcement products — Woven fabrics — Determination of width and length,Produits de renfort — Tissus — Détermination de la largeur (laize) et de la longueur,1997-12-04,2,['59.100.10'],ISO/TC 61/SC 13,9599,[11047],[74000],"['en','fr']",3,

11049,IS,,ISO 5028:1977,Withdrawal of ISO 5028-1977,Annulation de l'ISO 5028-1977,1977-05-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],['en'],1,

11050,IS,,ISO 5029:1977,Continuous mechanical handling equipment for loose bulk materials — Storage equipment fed by a pneumatic handling system — Safety code,Engins de manutention continue pour produits en vrac — Equipements de stockage alimentés par manutention pneumatique — Code de sécurité,1977-05-01,1,['53.080'],ISO/TC 101,9599,,[15645],"['en','fr']",2,

11051,IS,,ISO 5030:1977,Withdrawal of ISO 5030-1977,Annulation de l'ISO 5030-1977,1977-05-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],['en'],1,

11056,IS,,ISO 5035:1977,Withdrawal of ISO 5035-1977,Annulation de l'ISO 5035-1977,1977-05-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1,

11057,IS,,ISO 5036:1977,Withdrawal of ISO 5036-1977,Annulation de l'ISO 5036-1977,1977-05-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",2,

11058,IS,,ISO 5037:1977,Withdrawal of ISO 5037-1977,Annulation de l'ISO 5037-1977,1977-05-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1,

11059,IS,,ISO 5038:1977,Withdrawal of ISO 5038-1977,Annulation de l'ISO 5038-1977,1977-05-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1,

11060,IS,,ISO 5039:1977,Withdrawal of ISO 5039-1977,Annulation de l'ISO 5039-1977,1977-06-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1,

11061,IS,,ISO 5040:1977,Withdrawal of ISO 5040-1977,Annulation de l'ISO 5040-1977,1977-06-01,1,['53.040.01'],ISO/TC 101,9599,,[13741],"['en','fr']",1,