Withdrawn and superseded ISO standards — page 126 of 246

10915,IS,Amd,ISO 4898:1984/Amd 4:2000,Cellular plastics — Specification for rigid cellular materials used in the thermal insulation of buildings — Amendment 4,Plastiques alvéolaires — Spécifications des matériaux rigides utilisés dans l'isolation thermique des bâtiments — Amendement 4,2000-04-06,1,['83.100'],ISO/TC 61/SC 10,9599,,[31266],"['en','fr']",13,

31266,IS,,ISO 4898:2004,Rigid cellular plastics — Thermal insulation products for buildings — Specifications,Plastiques alvéolaires rigides — Produits d'isolation thermique pour bâtiments — Spécifications,2004-08-25,2,"['83.100','91.100.60']",ISO/TC 61/SC 10,9599,"[10913,10911,10915,10912]",[42341],['en'],12,"<p>ISO 4898:2004 specifies requirements and methods of testing for three categories of rigid cellular plastics thermal-insulation products for buildings. It covers rigid cellular plastics in the form of flat or profiled boards, with or without natural skins. They may also be faced or laminated with foil, plastic or metal films or sheets, mineral coatings, paper, cardboard or other mater

42341,IS,,ISO 4898:2006,Rigid cellular plastics — Thermal insulation products for buildings — Specifications,Plastiques alvéolaires rigides — Produits d'isolation thermique pour bâtiments — Spécifications,2006-04-19,3,"['83.100','91.100.60']",ISO/TC 61/SC 10,9599,[31266],[45095],['en'],14,"<p>ISO 4898:2006 specifies requirements and methods of testing for four categories of rigid cellular plastics thermal-insulation products for buildings. It covers rigid cellular plastics in the form of flat or profiled boards, with or without natural skins. They may also be faced or laminated with foil, plastic or metal films or sheets, mineral coatings, paper, cardboard or other materials.</p><p>It is not

45095,IS,,ISO 4898:2008,Rigid cellular plastics — Thermal insulation products for buildings — Specifications,Plastiques alvéolaires rigides — Produits d'isolation thermique pour bâtiments — Spécifications,2008-03-06,4,"['83.100','91.100.60']",ISO/TC 61/SC 10,9599,[42341],[52865],['en'],14,"<p>ISO 4898:2008 specifies requirements and methods of testing for four categories of rigid cellular plastics thermal-insulation products for buildings. It covers rigid cellular plastics in the form of flat or profiled boards, with or without natural skins. They may also be faced or laminated with foil, plastic or metal films or sheets, mineral coatings, paper, cardboard or other materials.</p><p>It is not

52865,IS,,ISO 4898:2010,Rigid cellular plastics — Thermal insulation products for buildings — Specifications,Plastiques alvéolaires rigides — Produits d'isolation thermique pour bâtiments — Spécifications,2010-02-24,5,"['83.100','91.100.60']",ISO/TC 61/SC 10,9599,[45095],[70322],"['en','ru']",14,"<p>ISO 4898:2010 specifies requirements and methods of testing for four categories of rigid cellular plastics thermal-insulation products for buildings. It covers rigid cellular plastics in the form of flat or profiled boards, with or without natural skins. They may also be faced or laminated with foil, plastic or metal films or sheets, mineral coatings, paper, cardboard or other materials.</p><p>It

70322,IS,,ISO 4898:2018,Rigid cellular plastics — Thermal insulation products for buildings — Specifications,Plastiques alvéolaires rigides — Produits d'isolation thermique pour bâtiments — Spécifications,2018-03-21,6,"['83.100','91.100.60']",ISO/TC 61/SC 10,9599,[52865],[86150],['en'],13,"<p>ISO 4898:2018 specifies requirements and methods of testing for three categories of rigid cellular plastics thermal-insulation products for buildings. It covers rigid cellular plastics in the form of flat or profiled boards, with or without natural skins. They can also be faced or laminated with foil, plastic or metal films or sheets, mineral coatings, paper, cardboard or other materials.</p><p>ISO 4898

10916,IS,,ISO 4899:1982,Textile glass reinforced thermosetting plastics — Properties and test methods,Plastiques thermodurcissables renforcés au verre textile — Caractéristiques et méthodes d'essai,1982-12-01,1,['83.120'],ISO/TC 61/SC 13,9599,,[10917],"['en','fr']",3,

3684,IS,,ISO 49:1983,Malleable cast iron fittings threaded to ISO 7/1,Raccords en fonte malléable filetés selon l'ISO 7/1,1983-05-01,1,['23.040.40'],ISO/TC 5/SC 5,9599,,[3686],"['en','fr']",30,

4537,IS,,ISO 490:1978,Cinematography — Magnetic stripes and magnetic recording head gaps for sound record on 16 mm motion-picture film perforated along one edge (type 1) — Positions and width dimensions,Cinématographie — Pistes magnétiques et entrefers de têtes magnétiques d'enregistrement du son sur film cinématographique 16 mm perforé sur un bord (type 1) — Emplacement et largeurs,1978-09-01,1,['37.060.20'],ISO/TC 36,9599,,[2495],"['en','fr']",2,

10918,IS,,ISO 4900:1990,Textile glass — Mats and fabrics — Determination of contact mouldability,Verre textile — Mats et tissus — Détermination de l'aptitude au moulage au contact,1990-05-03,1,['59.100.10'],ISO/TC 61/SC 13,9599,,[59253],"['en','fr']",3,

10919,IS,,ISO 4901:1985,Reinforced plastics based on unsaturated polyester resins — Determination of residual styrene monomer content,Plastiques renforcés à base de résines de polyesters non saturés — Détermination du styrène monomère résiduel,1985-09-19,1,['83.120'],ISO/TC 61/SC 12,9599,,"[26316,52876]","['en','fr']",5,<p>The residual styrene monomer content in reinforced plastics based on unsaturated polyester (UP) resins is an important criterion in evaluating the degree of cure of UP resins in the polymerized state. The determination is carried out by extraction of the residual monomer styrene from the UP resin in the polymerized state using dichloromethane and subsequent gaschromatograp

10920,IS,,ISO 4902:1980,Data communication — 37-pin and 9- pin DTE/DCE interface connectors and pin assignments,Téléinformatique — Affectation des broches et description des connecteurs 37 et 9 broches à la jonction entre ETTD et ETCD,1980-12-01,1,['35.100.10'],ISO/IEC JTC 1/SC 6,9599,,[10921],"['en','fr']",24,

10922,IS,,ISO 4903:1980,Data communication — 15- pin DTE/DCE interface connector and pin assignments,Téléinformatique — Affectation des broches et description du connecteur 15 broches à la jonction entre ETTD et ETCD,1980-06-01,1,['35.100.10'],ISO/IEC JTC 1/SC 6,9599,,[10923],"['en','fr']",16,

10924,IS,,ISO 4909:1978,Bank cards — Magnetic stripe data content for track 3,Cartes bancaires — Zone magnétique — Contenu en données de la piste 3,1978-10-01,1,['35.240.15'],ISO/TC 68,9599,,[10925],"['en','fr']",8,

10925,IS,,ISO 4909:1987,Bank cards — Magnetic stripe data content for track 3,Cartes bancaires — Zone magnétique — Contenu en données de la piste 3,1987-07-09,2,['35.240.15'],ISO/TC 68,9599,[10924],[33583],"['en','fr']",10,

33165,IS,Cor,ISO 4909:1987/Cor 1:1999,Bank cards — Magnetic stripe data content for track 3 — Technical Corrigendum 1: .,Cartes bancaires — Zone magnétique — Contenu en données de la piste 3 — Rectificatif technique 1: .,1999-12-16,2,['35.240.15'],ISO/TC 68,9599,,[33583],"['en','fr']",1,

33583,IS,,ISO 4909:2000,Bank cards — Magnetic stripe data content for track 3,Cartes bancaires — Zone magnétique — Contenu en données de la piste 3,2000-06-29,3,['35.240.15'],ISO/IEC JTC 1/SC 17,9599,"[10925,33165]",[43309],['en'],16,

4539,IS,,ISO 491:1983,Cinematography — 35 mm motion-picture film and magnetic film — Cutting and perforating dimensions,Cinématographie — Film cinématographique et magnétique de 35 mm — Dimensions de coupe et de perforation,1983-12-01,3,['37.060.20'],ISO/TC 36,9599,,[4540],"['en','fr']",4,

4540,IS,,ISO 491:1988,Cinematography — 35 mm motion-picture film and magnetic film — Cutting and perforating dimensions,Cinématographie — Film cinématographique et magnétique de 35 mm — Dimensions de coupe et de perforation,1988-10-27,4,['37.060.20'],ISO/TC 36,9599,[4539],[20577],"['en','fr']",4,

20577,IS,,ISO 491:1995,Cinematography — 35 mm motion-picture film and magnetic film — Cutting and perforating dimensions,Cinématographie — Film cinématographique et magnétique de 35 mm — Dimensions de coupe et de perforation,1995-03-23,5,['37.060.20'],ISO/TC 36,9599,[4540],[34907],['en'],6,"<p>Specifies the cutting and perforating dimensions for 35 mm unexposed motion-picture film and 35 mm magnetic film, and the types of perforations used.</p>"

10931,IS,,ISO 4915:1981,Textiles — Stitch types — Classification and terminology,Textiles — Types de points — Classification et terminologie,1981-12-01,1,['59.080.01'],ISO/TC 38,9599,,[10932],"['en','fr']",47,

10933,IS,,ISO 4916:1982,Textiles — Seam types — Classification and terminology,Textiles — Types de coutures — Classification et terminologie,1982-08-01,1,['59.080.01'],ISO/TC 38,9599,,[10934],"['en','fr']",63,

32891,IS,,ISO 4918:2009,"Resilient, textile and laminate floor coverings — Castor chair test","Revêtements de sol textiles, résilients ou stratifiés — Essai à l'appareil à roulettes",2009-09-01,1,['97.150'],ISO/TC 219,9599,[10935],[64610],"['en','fr']",13,"<p>ISO 4918:2008 specifies methods for assessment of the wear behaviour of textile floor coverings, assessment of the change in colour (glossing) of needled floor coverings without a pile, assessment of the general structural integrity of textile floor coverings, and determination of susceptibility to surface crazing, construction integrity and joint stability for resilient or laminate floor covering, including joints.</p><p>The methods in

10936,IS,,ISO 4919:1978,Textile floor coverings — Determination of tuft withdrawal force,Tapis-moquettes — Détermination de la force d'arrachement de touffes,1978-10-01,1,['97.150'],ISO/TC 219,9599,,[46256],"['en','fr']",3,"<p>Applicable to all carpets and textile floor coverings with a cut or loop pile yarn structure. One end of a tuft is gripped or a loop is hooked, and the maximum force registered during the removal process is recorded. One possible form of flat horizontal mounting is illustrated in an added figure.</p>"

4541,IS,,ISO 492:1981,Radial bearings — Tolerances,Roulements radiaux — Tolérances,1981-10-01,1,['21.100.20'],ISO/TC 4,9599,,[4542],"['en','fr']",13,

4542,IS,,ISO 492:1986,Rolling bearings — Radial bearings — Tolerances,Roulements — Roulements radiaux — Tolérances,1986-12-11,2,['21.100.20'],ISO/TC 4/SC 4,9599,"[4669,4670,4671,7190,6264,4541]",[20523],"['en','fr']",13,

20523,IS,,ISO 492:1994,Rolling bearings — Radial bearings — Tolerances,Roulements — Roulements radiaux — Tolérances,1994-12-01,3,['21.100.20'],ISO/TC 4/SC 4,9599,[4542],[32059],"['en','fr']",19,<p>Cancels and replaces the second edition (1986). Specifies tolerances for boundary dimensions and the running accuracy of radial rolling bearings specified in ISO 15 and ISO 355. Does not apply to certain radial bearings of particular type or for particular fields of application.</p>

32059,IS,,ISO 492:2002,Rolling bearings — Radial bearings — Tolerances,Roulements — Roulements radiaux — Tolérances,2002-04-25,4,['21.100.20'],ISO/TC 4/SC 4,9599,[20523],[60356],"['en','fr']",25,"<p>ISO 492 specifies tolerances for boundary dimensions (except chamfer dimensions) and the running accuracy of radial rolling bearings specified in ISO 15, ISO 355 and ISO 8443.</p><p>This International Standard does not apply to certain radial bearings of particular types (e.g., drawn cup needle roller bearings) or for particular fields of application (e.g., airframe bearings and instrument precision bearings). </p>"

60356,IS,,ISO 492:2014,Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values,Roulements — Roulements radiaux — Spécification géométrique des produits (GPS) et valeurs de tolérance,2014-07-14,5,['21.100.20'],ISO/TC 4/SC 4,9599,[32059],[80376],"['en','fr','ru']",66,"<p>ISO 492:2014 specifies dimensional and geometrical characteristics, limit deviations from nominal values, and tolerance values to define the interface (except chamfers) of radial rolling bearings. The nominal boundary dimensions are defined in ISO 15, ISO 355 and ISO 8443.</p>"

10937,IS,,ISO 4920:1981,Textiles — Determination of resistance to surface wetting (spray test) of fabrics,Étoffes — Détermination de la résistance au mouillage superficiel (Essai d'arrosage),1981-05-01,1,['59.080.30'],ISO/TC 38/SC 2,9599,,[50706],"['en','fr']",3,"<p>The method is applicable to all fabrics which may or may not have been given a water-resistant or water-repellent finish. It is not intended to predict the rain penetration resistance of fabrics, since it does not measure penetration of water through the fabric. Before testing carried out the specimen shall be conditioned for at least 24 h in the standard atmosphere for testing textiles.</p>"

10938,IS,,ISO 4921:1993,Knitting — Basic concepts — Vocabulary,Tricotage — Notions de base — Vocabulaire,1993-10-21,1,"['59.020','01.040.59']",ISO/TC 38/SC 20,9599,,[33711],"['en','fr']",27,

10939,IS,,ISO 4925:1978,Road vehicles — Non-petroleum base brake fluid,Véhicules routiers — Liquide de frein à base non pétrolière,1978-09-01,1,"['75.120','43.040.40']",ISO/TC 22,9599,,"[10940,38513]","['en','fr']",22,"<p>Specifies the characteristics and the test methods for the non-petroleum base brake fluid used in the hydraulic brake systems. The brake fluid described is for use in brake systems equipped with seals, cups or double-lipped type gland seals made from natural rubber, styrene-butadiene rubber, and ethylene-propylene elastomer.</p>"

38513,IS,,ISO 4925:2005,Road vehicles — Specification of non-petroleum-base brake fluids for hydraulic systems,Véhicules routiers — Spécifications pour liquides de frein à base non pétrolière pour systèmes hydrauliques,2005-02-08,2,"['75.120','43.040.40']",ISO/TC 22/SC 33,9599,[10939],"[64214,79370]","['en','fr']",25,"<p>ISO 4925:2005 specifies non-petroleum-base fluids used in road-vehicle hydraulic brake and clutch systems that are designed for use with such fluids and equipped with seals, cups or double-lipped type gland seals made of styrene-butadiene rubber (SBR) and ethylene-propylene elastomer (EPDM).</p>"

79370,IS,,ISO 4925:2020,Road vehicles — Specification of non-petroleum-based brake fluids for hydraulic systems,Véhicules routiers — Spécifications pour liquides de frein à base non pétrolière pour systèmes hydrauliques,2020-07-08,3,"['75.120','43.040.40']",ISO/TC 22/SC 33,9599,[38513],"[81817,88473]",['en'],25,"<p>This document provides the specifications, requirements and test methods, for non-petroleum-based fluids used in road-vehicle hydraulic brake and clutch systems that are designed for use with such fluids and equipped with seals, cups or double-lipped type gland seals made of styrene-butadiene rubber (SBR) and ethylene-propylene elastomer (EPDM).</p>"

10941,IS,,ISO 4926:1978,Road vehicles — Hydraulic brake systems — Non-petroleum base reference fluids,Véhicules routiers — Freins hydrauliques — Liquides de référence à base non pétrolière,1978-02-01,1,"['75.120','43.040.40']",ISO/TC 22,9599,,[43023],"['en','fr']",2,"<p>Specifies the composition and some characteristics of two reference fluids used for the testing of hydraulic braking systems and components mounted on road vehicles. Tabulates the 24 constituents and their composition by mass % for the ISO compatibility fluid, and the 6 constituents and their composition by mass % for the ISO fluid for storage corrosion test.</p>"

43023,IS,,ISO 4926:2006,Road vehicles — Hydraulic braking systems — Non-petroleum-base reference fluids,Véhicules routiers — Systèmes de freinage hydrauliques — Liquides de référence à base non pétrolière,2006-10-25,2,"['75.120','43.040.40']",ISO/TC 22/SC 33,9599,[10941],[79099],['en'],2,<p>ISO 4926:2006 specifies the composition and characteristics of a reference fluid used for the compatibility testing of hydraulic braking systems and components mounted on road vehicles.</p>

10943,IS,,ISO 4927:1978,Road vehicles — Elastomeric boots for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C maximum),Véhicules routiers — Capuchons en caoutchouc pour cylindres de roue pour freins hydrauliques à tambour utilisant un liquide de frein à base non pétrolière (Température maximale d'utilisation 120 degrés C),1978-03-01,1,"['83.140.50','43.040.40']",ISO/TC 22,9599,,[38512],"['en','fr']",4,"<p>Specifies performance tests for moulded rubber boots used at end closures on drum type brake cylinders. These boots prevent the entrance of dirt and moisture which could cause corrosion and otherwise impair wheel

10944,IS,,ISO 4928:1980,Road vehicles — Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.),Véhicules routiers — Coupelles et joints en caoutchouc pour cylindres de dispositifs de freinage hydrauliques utilisant un liquide de frein à base non pétrolière (Température maximale d'utilisation 120 degrés C),1980-05-01,2,"['83.140.50','43.040.40']",ISO/TC 22,9599,,"[40421,10945]","['en','fr']",12,"<p>Specifies performance tests of brake cups and seals for braking systems. Requirements relating to chemical composition, tensile strength and elongation of the rubber compound are not included.

10947,IS,,ISO 4930:1978,Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.),Véhicules routiers — Joints en caoutchouc pour cylindres de freins hydrauliques à disque utilisant un liquide de frein à base non pétrolière (Température maximale d'utilisation 150 degrés C),1978-08-01,1,"['83.140.50','43.040.40']",ISO/TC 22,9599,,"[41831,33207]","['en','fr']",6,"<p>Specifies the performance test methods and requirements for seals used in disc brake cylinders. Applies to solid section type seals (square, rectangular, 'O'-ring) mounted stationary in the cylinder bore or on the movable piston of d

10948,IS,,ISO 4934:1980,Steel and cast iron — Determination of sulfur content — Gravimetric method,Aciers et fontes — Dosage du soufre — Méthode gravimétrique,1980-10-01,1,['77.080.01'],ISO/TC 17/SC 1,9599,,"[28509,28511]","['en','fr']",5,"<p>The method is applicable to products having sulphur contents greater than 0,003 % (m/m). It is particularly suitable as a reference method for the standardization of samples on which certified standard values are to be established. Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report.</p>"

10950,IS,,ISO 4936:1984,Steel and cast iron — Determination of chromium content — Diphenylcarbazide spectrophotometric method,Aciers et fontes — Dosage du chrome — Méthode spectrophotométrique à la diphénylcarbazide,1984-11-01,1,['77.080.01'],ISO/TC 17/SC 1,9599,,[18132],"['en','fr']",3,

10951,IS,,ISO 4937:1986,Steel and iron — Determination of chromium content — Potentiometric or visual titration method,Aciers et fontes — Dosage du chrome — Méthode par titrage potentiométrique ou visuel,1986-12-18,1,['77.080.01'],ISO/TC 17/SC 1,9599,,[86373],"['en','fr']",8,"<p>The method is applicable to chromium contents between 0.25 % (m/m) and 35 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. Annex A gives additional information on the international co-operative tests, and Annex B represents the precision data graphically.</p>"

10952,IS,,ISO 4938:1988,Steel and iron — Determination of nickel content — Gravimetric or titrimetric method,Aciers et fontes — Dosage du nickel — Méthode gravimétrique ou titrimétrique,1988-12-15,1,['77.080.01'],ISO/TC 17/SC 1,9599,,[63304],"['en','fr']",8,"<p>The method is applicable to nickel contents between 0.5 % (m/m) and 30 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. Annex A gives additional information on the international co-operative tests, and Annex B represents the precision data graphically.</p>"

10953,IS,,ISO 4939:1984,Steel and cast iron — Determination of nickel content — Dimethylglyoxime spectrophotometric method,Aciers et fontes — Dosage du nickel — Méthode spectrophotométrique à la diphénylcarbazide,1984-12-01,1,['77.080.01'],ISO/TC 17/SC 1,9599,,[63305],"['en','fr']",6,"<p>The method is applicable to different nickel contents. Cobalt, copper and manganese may cause interferences. Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. Annex A gives additional information on the international co-operative tests, and Annex B represents the precision data graphically.</p>"

4545,IS,,ISO 494:1975,Parallel shank twist drills — Long series,Forets à queue cylindrique — Série longue,1975-02-01,1,['25.100.30'],ISO/TC 29/SC 9,9599,,[50900],"['en','fr']",5,

50900,IS,,ISO 494:2009,Cylindrical shank twist drills — Long series,Forets à queue cylindrique — Série longue,2009-02-26,2,['25.100.30'],ISO/TC 29/SC 9,9599,[4545],[68941],"['en','fr']",5,"<p>ISO 494:2009 specifies the dimensions of cylindrical shank twist drills, having working lengths in the long series.</p>"

10954,IS,,ISO 4940:1985,Steel and cast iron — Determination of nickel content — Flame atomic absorption spectrometric method,Aciers et fontes — Dosage du nickel — Méthode par spectrométrie d'absorption atomique dans la flamme,1985-12-19,1,['77.080.01'],ISO/TC 17/SC 1,9599,,[87405],"['en','fr']",7,"<p>The method is applicable to nickel contents between 0.002 % (m/m) and 0.5 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. Annex A gives additional information on the international co-operative tests, and Annex B represents the precision data graphically.</p>"

10956,IS,,ISO 4941:1978,Steels and cast irons — Determination of molybdenum content — Photometric method,Aciers et fontes — Dosage du molybdène — Méthode photométrique,1978-03-01,1,['77.080'],ISO/TC 17/SC 1,9599,,[10957],"['en','fr']",4,

10957,IS,,ISO 4941:1994,Steel and iron — Determination of molybdenum content — Thiocyanate spectrophotometric method,Aciers et fontes — Dosage du molybdène — Méthode spectrophotométrique au thiocyanate,1994-12-22,2,['77.080.01'],ISO/TC 17/SC 1,9599,[10956],[86370],"['en','fr']",8,"<p>Cancels and replaces the first edition (1978). Specifies a thiocyanate spectrophotometric method for the determination of the molybdenum content in steel and iron. Applicable to molybdenum contents between 0,005 % (m/m) and 0,125 % (m/m). Vanadium and tungsten interfere with the measurement if, because of their contents, the V/Mo ratio is greater than 16 or the W/Mo ratio is greater than 8.</p>"

10958,IS,,ISO 4942:1988,Steel and iron — Determination of vanadium content — N-BPHA spectrophotometric method,Aciers et fontes — Dosage du vanadium — Méthode spectrophotométrique au N-BPHA,1988-12-15,1,['77.080.01'],ISO/TC 17/SC 1,9599,,[63306],"['en','fr']",6,"<p>The method is applicable to vanadium contents between 0.005 % (m/m) and 0.50 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. Annex A gives additional information on the international co-operative tests. Annex B includes the graphical representation of precision data.</p>"

10959,IS,,ISO 4943:1985,Steel and cast iron — Determination of copper content — Flame atomic absorption spectrometric method,Aciers et fontes — Dosage du cuivre — Méthode par spectrométrie d'absorption atomique dans la flamme,1985-12-12,1,['77.080.01'],ISO/TC 17/SC 1,9599,,[75952],"['en','fr']",6,"<p>The method is applicable to copper contents between 0.004 % (m/m) and 0.5 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. Annex A gives additional information on the international co-operative tests. Annex B includes the graphical representation of precision data.</p>"

10960,IS,,ISO 4945:1977,Steel — Determination of nitrogen content — Spectrophotometric method,Acier — Dosage de l'azote — Méthode spectrophotométrique,1977-12-01,1,['77.080.20'],ISO/TC 17/SC 1,9599,,[67387],"['en','fr']",6,"<p>This method is applicable to non-alloy and low-alloy steels containing between 0.002 % (m/m) and 0.050 % (m/m) of nitrogen and less than 0.6 % (m/m) of silicon. It allows the determination only of the nitrogen content which can be converted to an ammonium salt. Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report.</p>"

10961,IS,,ISO 4946:1984,"Steel and cast iron — Determination of copper content — 2,2'-Diquinolyl spectrophotometric method","Aciers et fontes — Dosage du cuivre — Méthode spectrophotométrique au 2,2'-biquinolyle",1984-12-01,1,['77.080.01'],ISO/TC 17/SC 1,9599,,[63307],"['en','fr']",6,"<p>This method is applicable to copper contents between 0.02 % (m/m) and 5 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. Annex A gives additional information on the international co-operative tests. Annex B includes the graphical representation of precision data.</p>"

10962,IS,,ISO 4947:1986,Steel and cast iron — Determination of vanadium content — Potentiometric titration method,Aciers et fontes — Dosage du vanadium — Méthode par titrage potentiométrique,1986-06-05,1,['77.080.01'],ISO/TC 17/SC 1,9599,,[74712],"['en','fr']",6,"<p>This method is applicable to vanadium contents between 0.04 % (m/m) and 2 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. Annex A gives additional information on the international co-operative tests. Annex B includes the graphical representation of precision data.</p>"

4546,IS,,ISO 495:1966,Withdrawal of ISO/R 495-1966,Annulation de l'ISO/R 495-1966,1966-08-01,1,['17.140.01'],ISO/TC 43,9599,,"[9235,9242,9239,9241,9233,9237,9231]",['en'],8,

10966,IS,,ISO 4950-1:1981,High yield strength flat steel products — Part 1: General requirements,Produits plats en acier à haute limite d'élasticité — Partie 1: Prescriptions générales,1981-05-01,1,['77.140.50'],ISO/TC 17/SC 3,9599,,[10967],"['en','fr']",5,

10968,IS,,ISO 4950-2:1981,High yield strength flat steel products — Part 2: Products supplied in the normalized or controlled rolled condition,Produits plats en acier à haute limite d'élasticité — Partie 2: Produits livrés à l'état normalisé ou de laminage contrôlé,1981-06-01,1,['77.140.50'],ISO/TC 17/SC 3,9599,,[10969],"['en','fr']",3,

10970,IS,,ISO 4950-3:1981,High yield strength flat steel products — Part 3: Products supplied in the heat- treated (quenched + tempered) condition,Produits plats en acier à haute limite d'élasticité — Partie 3: Produits livrés à l'état traité (trempé + revenu),1981-04-01,1,['77.140.50'],ISO/TC 17/SC 3,9599,,[10971],"['en','fr']",3,

10972,IS,,ISO 4951:1979,High yield strength steel bars and sections,"Barres, profilés et poutrelles en acier à haute limite d'élasticité",1979-10-01,1,"['77.140.60','77.140.70']",ISO/TC 17/SC 3,9599,,"[27819,1075,27818]","['en','fr']",7,

10973,IS,,ISO 4952:1981,Structural steels with improved atmospheric corrosion resistance,Aciers de construction à résistance améliorée à la corrosion atmosphérique,1981-08-01,1,['77.140.20'],ISO/TC 17/SC 3,9599,,"[10974,33026]","['en','fr']",8,"<p>Specifies the chemical and mechanical properties, methods of manufacture, acceptance conditions and marking. Applies to plates hot-rolled on reversing mills having a thickness of 3 mm and over, wide flats, bars, beams, sections and hollow sections. Does not deal with steels for which other Internationale Standards exist. The position and orientation of samples are given in the annex.</p>"

33026,IS,,ISO 4952:2003,Structural steels with improved atmospheric corrosion resistance,Aciers de construction à résistance améliorée à la corrosion atmosphérique,2003-02-26,2,['77.140.20'],ISO/TC 17/SC 3,9599,[10973],[39636],"['en','fr']",15,"<p>ISO 4952 specifies the chemical and mechanical characteristics, methods of manufacture, the acceptance conditions and the marking of structural steel products possessing improved atmospheric corrosion resistance.</p><p>It applies to plates having a thickness of 4 mm and over, hot-rolled on reversing mills, wide flats, bars and hot-rolled sections generally used in the delivery condition and which, as a rule, form part of the bolted, riveted or weld

39636,IS,,ISO 4952:2006,Structural steels with improved atmospheric corrosion resistance,Aciers de construction à résistance améliorée à la corrosion atmosphérique,2006-10-06,3,['77.140.20'],ISO/TC 17/SC 3,9599,[33026],[60901],"['en','ru']",14,"<p>ISO 4952:2006 specifies the chemical and mechanical characteristics, the methods of manufacture, the acceptance conditions and the marking of structural steel products with improved atmospheric corrosion resistance.</p><p>ISO 4952:2006 applies to plates hot-rolled on reversing mills, having a thickness of 4 mm and over, wide flats, bars, and hot-rolled sections, generally used in the delivery condition and which, as a rule, form part of the bolted,

10975,IS,,ISO 4954:1979,Steels for cold heading and cold extruding,Aciers pour refoulement et extrusion à froid,1979-10-01,1,"['77.140.10','77.140.20']",ISO/TC 17/SC 4,9599,,[10976],"['en','fr']",37,

10976,IS,,ISO 4954:1993,Steels for cold heading and cold extruding,Aciers pour refoulement et extrusion à froid,1993-02-18,2,"['77.140.10','77.140.20']",ISO/TC 17/SC 4,9599,[10975],[68959],"['en','fr']",38,"<p>Applies to wrought unalloyed and alloyed steels delivered as wire rods, wire or bars. The five sections cover the following topics: general requirements; steels not intended for heat treatment (diameters from 2 mm to 100 mm); case-hardening steels (diameters from 2 mm to 100 mm); steels for quenching and tempering including boron treated steels (diameters from 2 mm to 100 mm); stainless steels (diameters of 2 mm up to 25 mm for ferritic, up to 100 mm for martensitic, and up to 50 mm fo

68959,IS,,ISO 4954:2018,Steels for cold heading and cold extruding,Aciers pour transformation à froid et extrusion à froid,2018-07-17,3,"['77.140.10','77.140.20']",ISO/TC 17/SC 4,9599,[10976],[82655],['en'],68,"<p>This document specifies requirements for non-alloy and alloy steels that are intended for cold heading or cold extruding and are delivered as wire rods, wire or bars. It also contains specific requirements for:</p><p>— steels not intended for heat treatment, with diameters from 2 mm to 100 mm (see Annex A);</p><p>— case-hardening steels with diameters from 2 mm to 100 mm (see Annex B);</p><p>— steels for quenching and tempering, including boron alloyed st

82655,IS,,ISO 4954:2021,Steels for cold heading and cold extruding,Aciers pour transformation à froid et extrusion à froid,2021-07-28,4,"['77.140.10','77.140.20']",ISO/TC 17/SC 4,9599,[68959],[84275],['en'],67,"<p>This document specifies requirements for non-alloy and alloy steels that are intended for cold heading or cold extruding and are delivered as wire rods, wire or bars. It also contains specific requirements for:</p><p>— steels not intended for heat treatment, with diameters from 2 mm to 100 mm (see Annex A);</p><p>— case-hardening steels with diameters from 2 mm to 100 mm (see Annex B);</p><p>— steels for quenching and tempering, including boron alloyed steels (see Table C.

84275,IS,,ISO 4954:2022,Steels for cold heading and cold extruding,Aciers pour transformation à froid et extrusion à froid,2022-06-02,5,"['77.140.10','77.140.20']",ISO/TC 17/SC 4,9599,[82655],"[86277,86276]",['en'],67,"<p>This document specifies requirements for non-alloy and alloy steels that are intended for cold heading or cold extruding and are delivered as wire rods, wire or bars. It also contains specific requirements for:</p><p>— steels not intended for heat treatment, with diameters from 2 mm to 100 mm (see Annex A);</p><p>— case-hardening steels with diameters from 2 mm to 100 mm (see Annex B);</p><p>— steels for quenching and tempering, including boron-alloyed steels (see

10977,IS,,ISO 4955:1983,Heat-resisting steels and alloys,Aciers et alliages réfractaires,1983-12-01,1,"['77.140.10','77.140.20']",ISO/TC 17/SC 4,9599,,[10978],"['en','fr']",15,

10978,IS,,ISO 4955:1994,Heat-resisting steels and alloys,Aciers et alliages réfractaires,1994-05-05,2,['77.140.20'],ISO/TC 17/SC 4,9599,[10977],[36213],"['en','fr']",19,"<p>Specifies requirements for the grades of wrought steels and alloys which are usually employed for products for which the resistance to the effects of hot gases and the products of combustion at temperatures in the region above 550 °C is the main requirement. Is applicable to bars, flat products, wire and rod, forgings. In addition, the general technical delivery requirements of ISO 404 are applicable.</p>"

36213,IS,,ISO 4955:2005,Heat-resistant steels,Aciers réfractaires,2005-04-20,3,['77.140.20'],ISO/TC 17/SC 4,9599,[10978],[65940],"['en','fr']",23,"<p>ISO 4955:2005 specifies requirements for the grades of wrought steels which are usually employed for products for which the resistance to the effects of hot gases and the products of combustion at temperatures in the region above 550 °C is the main requirement.</p><p>ISO 4955:2005 is applicable to flat products, bars, sections, wire and rod, and forgings.</p>"

10980,IS,,ISO 4957:1980,Tool steels,Aciers à outils,1980-09-01,1,['77.140.35'],ISO/TC 17/SC 4,9599,,[23194],"['en','fr']",20,

23194,IS,,ISO 4957:1999,Tool steels,Aciers à outils,1999-12-16,2,['77.140.35'],ISO/TC 17/SC 4,9599,[10980],[70646],"['en','fr']",32,

10982,IS,,ISO 4960:1986,"Cold-reduced carbon steel strip with a carbon content over 0,25 %","Feuillards en acier au carbone laminés à froid à teneur en carbone supérieure à 0,25 %",1986-09-18,1,['77.140.50'],ISO/TC 17/SC 12,9599,,[27821],"['en','fr']",8,

27821,IS,,ISO 4960:1999,"Cold-reduced carbon steel strip with a carbon content over 0,25 %","Feuillards en acier au carbone laminés à froid à teneur en carbone supérieure à 0,25 %",1999-07-15,2,['77.140.50'],ISO/TC 17/SC 12,9599,[10982],[42302],"['en','fr']",12,

42302,IS,,ISO 4960:2007,"Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 %","Feuillards en acier au carbone laminés à froid à teneur en carbone supérieure à 0,25 %",2007-12-06,3,['77.140.50'],ISO/TC 17/SC 12,9599,[27821],[73347],"['en','ru']",13,"<p>ISO 4960:2007 applies to cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 %. It is commonly produced in thicknesses of 6 mm and under, and in widths up to 600 mm exclusive, in coils and cut lengths. The strip is ordered in the as-delivered condition and is predominantly used for springs, but also for other highly stressed parts of many different types. Steel designations CS55 to CS95 may be supplie

10984,IS,,ISO 4965:1979,Axial load fatigue testing machines — Dynamic force calibration — Strain gauge technique,Machines d'essai de fatigue par charge axiale — Étalonnage dynamique — Technique des jauges de déformation,1979-04-01,1,['77.040.10'],ISO/TC 164,9599,,"[20248,50241,50238]","['en','fr']",7,"<p>These guidelines lay down calibration of fatigue testing machine including special attachments, for example grips, which may affect the calibration. ISO 4965 deals exclusively with axial load machines in which symmetrical test pieces are subjected to fluctuating and reversed forces. Applies both to the calibration of new testing machines by the manufacturer and to the verification of machine

10985,IS,,ISO 4967:1979,Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams,Aciers — Détermination de la teneur en inclusions non métalliques — Méthode micrographique à l'aide d'images types,1979-04-01,1,['77.040.99'],ISO/TC 17/SC 7,9599,,[1111],"['en','fr']",12,

1111,IS,,ISO 4967:1998,Steel — Determination of content of nonmetallic inclusions — Micrographic method using standard diagrams,Aciers — Détermination de la teneur en inclusions non métalliques — Méthode micrographique à l'aide d'images types,1998-10-08,2,['77.040.99'],ISO/TC 17/SC 7,9599,[10985],[63156],"['en','fr']",37,

63156,IS,,ISO 4967:2013,Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams,Aciers — Détermination de la teneur en inclusions non métalliques — Méthode micrographique à l'aide d'images types,2013-07-24,3,['77.040.99'],ISO/TC 17/SC 7,9599,[1111],"[80831,86687]","['en','fr']",39,"<p>ISO 4967:2013 specifies a micrographic method of determining the non-metallic inclusions in rolled or forged steel products having a reduction ratio of at least 3 using standard diagrams. This method is widely used to assess the suitability of a steel for a given use. However, since it is difficult to achieve reproducible results owing to the influence of the te

10986,IS,,ISO 4968:1979,Steel — Macrographic examination by sulfur print (Baumann method),Acier — Examen macrographique par empreinte au soufre (méthode Baumann),1979-11-01,1,['77.040.99'],ISO/TC 17/SC 7,9599,,[74322],"['en','fr']",3,"<p>The Baumann method uses contact printing using silver salts and sulphuric acid. It is applicable to non-alloy and alloy steels and to cast irons of which the sulphur content is less than 0.1 %. Specifies general, principle, products and reagents, test pieces, procedure and test report.</p>"

10987,IS,,ISO 4969:1980,Steel — Macroscopic examination by etching with strong mineral acids,Acier — Examen macroscopique par attaque aux acides minéraux forts,1980-02-01,1,['77.040.99'],ISO/TC 17/SC 7,9599,,[57127],"['en','fr']",3,"<p>This macroscopic method has very wide application. Selection of the type and concentration of the reagent, the temperature of the reaction and the conditions of surface preparation of the test piece make it possible to achieve the required aim. Specifies general, principle, reagents, test piece, procedure, preservation of test pieces and test report.</p>"

10988,IS,,ISO 4970:1979,Steel — Determination of total or effective thickness of thin surface-hardened layers,Acier — Détermination de l'épaisseur totale ou conventionnelle des couches minces durcies superficielles,1979-11-01,1,['77.040.99'],ISO/TC 17/SC 7,9599,,[61748],"['en','fr']",4,"<p>Specifies the micrographic method and the microhardness measurement method. Applies to thin surface layers, with thicknesses of less than or equal to 0.3 mm, obtained, for example, by mechanical (shot blasting, shot peening, etc), thermal (flame or induction hardening, etc) or thermochemical (carbonitriding, carburizing and hardening, etc) treatment. It is not applicable to thin surface layer which are not

10989,IS,,ISO 4977-1:1984,Double cold-reduced electrolytic tinplate — Part 1: Sheet,Fer-blanc électrolytique laminé à froid par double réduction — Partie 1: Feuilles,1984-05-01,1,['77.140.50'],ISO/TC 17,9599,,[20548],"['en','fr']",14,

10990,IS,,ISO 4977-2:1988,Double cold-reduced electrolytic tinplate — Part 2: Coil for subsequent cutting into sheets,Fer blanc électrolytique laminé à froid par double réduction — Partie 2: Bobines destinées à être découpées en feuilles,1988-10-20,1,['77.140.50'],ISO/TC 17,9599,,[20548],"['en','fr']",16,

10991,IS,,ISO 4978:1983,Flat rolled steel products for welded gas cylinders,Produits plats laminés en acier pour bouteilles à gaz soudées,1983-12-01,1,['77.140.30'],ISO/TC 17/SC 10,9599,,"[69962,23055]","['en','fr']",4,"<p>Specifies the characteristics of flat rolled steel products with a thickness up to 6 mm of the unalloyed steels listed in table 1 which are intended for welded gas cylinders with a normalized structure. Describes for instance the manufacture of the steel, heat treatment, chemical composition, properties, surface condition, dimensions, acceptance tests, samples and testpieces.</p>"

4549,IS,,ISO 498:1974,"Natural rubber latex, concentrated — Preparation of dry films","Latex de caoutchouc naturel, concentré — Préparation de pellicules sèches",1974-12-01,1,['83.040.10'],ISO/TC 45,9599,,[4550],"['en','fr']",2,

10992,IS,,ISO 4986:1992,Steel castings — Magnetic particle inspection,Pièces moulées en acier — Contrôle par magnétoscopie,1992-05-28,1,"['77.040.20','77.140.80']",ISO/TC 17/SC 11,9599,,"[52300,38861]","['en','fr']",20,"<p>Specifies a test method for determining the acceptance limits of surface discontinuities detected by magnetic particle inspection, when such an inspection procedure has been contractually agreed upon at the request of the purchaser. Applies to all magnetic steel castings, whatever casting process is used.</p>"

52300,IS,,ISO 4986:2010,Steel castings — Magnetic particle inspection,Pièces moulées en acier — Contrôle par magnétoscopie,2010-03-10,2,"['77.040.20','77.140.80']",ISO/TC 17/SC 11,9599,[10992],[73041],"['en','fr','ru']",31,"<p>ISO 4986:2010 specifies a method for the magnetic particle inspection of ferro-magnetic steel castings.</p><p>It also gives acceptance criteria through severity levels defined by the nature, the area and the dimensions of the discontinuities present.</p><p>ISO 4986:2010 applies to all ferro‑magnetic castings, independent of the moulding method.</p><p>A steel casting is considered to be ferro‑magnetic if the magnetic induction is greater than 1 T (Tesla) for a magnetic

10993,IS,,ISO 4987:1992,Steel castings — Penetrant inspection,Pièces moulées en acier — Contrôle par ressuage,1992-05-28,1,"['77.040.20','77.140.80']",ISO/TC 17/SC 11,9599,,"[52301,38862]","['en','fr']",11,"<p>Specifies a test method for determining the acceptance limits of surface discontinuities detected by liquid penetrant inspection, when such an inspection procedure has been contractually agreed upon at the request of the purchaser. Applies to all steel castings, whatever casting process is used.</p>"

52301,IS,,ISO 4987:2010,Steel castings — Liquid penetrant inspection,Pièces moulées en acier — Contrôle par ressuage,2010-03-10,2,"['77.040.20','77.140.80']",ISO/TC 17/SC 11,9599,[10993],[73042],"['en','fr','ru']",31,"<p>ISO 4987:2010 specifies a method for the liquid penetrant inspection of steel castings, whatever their grade and the casting procedure used to produce them</p>"

10994,IS,,ISO 4990:1986,Steel castings — General technical delivery requirements,Pièces en acier moulées — Conditions générales techniques de livraison,1986-05-01,1,['77.140.80'],ISO/TC 17/SC 11,9599,,[25389],"['en','fr']",10,"<p>Includes the requirements for the selection and preparation of samples and test pieces. When material or product standards differ from this general delivery specification, the material or product standards apply. This standard also specifies a group of supplementary requirements which may be applied to steel castings when additional testing or inspection is desired.</p>"

25389,IS,,ISO 4990:2003,Steel castings — General technical delivery requirements,Pièces moulées en acier — Exigences générales techniques de livraison,2003-11-04,2,['77.140.80'],ISO/TC 17/SC 11,9599,[10994],[59266],"['en','fr']",15,"<p>ISO 4990:2003 specifies the general technical delivery requirements for the supply of steel, nickel and cobalt alloy castings, including the requirements for the selection and preparation of samples and test pieces.</p><p>This International Standard also specifies a group of supplementary requirements which may be applied to steel, nickel and cobalt alloy castings. These requirements are provided for use when additional testing or inspection is desired and app

59266,IS,,ISO 4990:2015,Steel castings — General technical delivery requirements,Pièces moulées en acier — Conditions techniques générales de fourniture,2015-09-08,3,['77.140.80'],ISO/TC 17/SC 11,9599,[25389],[84185],['en'],15,"<p>ISO 4990:2015 specifies the general technical delivery requirements for the supply of steel, nickel, and cobalt alloy castings, including the requirements for the selection and preparation of samples and test pieces.</p><p>When a material or product standard differ from this delivery specification, the material or product standard shall apply. In the case of investment castings, ISO 16468 will apply.</p><p>This International Standard also specifies a group of supp

10995,IS,,ISO 4991:1994,Steel castings for pressure purposes,Pièces moulées en acier pour service sous pression,1994-10-20,1,"['77.140.30','77.140.80']",ISO/TC 17/SC 11,9599,,"[38798,26851]","['en','fr']",13,<p>Covers steel castings used for pressure purposes. Includes materials which are used for the manufacture of components subject to pressure vessel codes and for other pressure containing components not subject to codal requirements. Does not cover the welding process or the properties of the weldment in cases where castings are produced by welding together component parts.</p>

38798,IS,,ISO 4991:2005,Steel castings for pressure purposes,Pièces moulées en acier pour service sous pression,2005-10-28,2,"['77.140.30','77.140.80']",ISO/TC 17/SC 11,9599,[10995],[59267],"['en','fr']",16,<p>ISO 4991:2005 covers steel castings for parts subjected to pressure.</p><p>It includes materials which are used for the manufacture of components subject to pressure vessel codes and components not subject to codes.</p><p>ISO 4991:2005 relates to castings manufactured from unalloyed and alloyed steel grades.</p>

59267,IS,,ISO 4991:2015,Steel castings for pressure purposes,Pièces moulées en acier pour service sous pression,2015-12-14,3,"['77.140.30','77.140.80']",ISO/TC 17/SC 11,9599,[38798],[84506],['en'],19,"<p>ISO 4991:2015 covers steel castings for pressure containing parts.</p><p>It includes materials which are used for the manufacture of components subject to pressure vessel codes and components not subject to codes.</p><p>This International Standard relates to castings manufactured from unalloyed and alloyed steel grades (characterized by their chemical composition, Table 1, and mechanical properties, Tables 2, 3, 4 and 5).</p><p>NOTE Annex D gives information on ISO grade designation

39551,IS,,ISO 4992-1:2006,Steel castings — Ultrasonic examination — Part 1: Steel castings for general purposes,Pièces moulées en acier — Contrôle aux ultrasons — Partie 1: Pièces moulées en acier pour usages généraux,2006-02-17,1,"['77.040.20','77.140.80']",ISO/TC 17/SC 11,9599,,[73044],['en'],30,"<p>ISO 4992-1:2006 specifies the requirements for the ultrasonic examination of steel castings (with ferritic structure) for general purposes, and the methods for determining internal discontinuities by the pulse-echo technique.</p><p>ISO 4992-1:2006 applies to the ultrasonic examination of steel castings which have usually received a grain-refining heat treatment and which have wall thicknesses u

39552,IS,,ISO 4992-2:2006,Steel castings — Ultrasonic examination — Part 2: Steel castings for highly stressed components,Pièces moulées en acier — Contrôle aux ultrasons — Partie 2: Pièces moulées en acier pour composants fortement sollicités,2006-02-17,1,"['77.040.20','77.140.80']",ISO/TC 17/SC 11,9599,,[73045],['en'],31,"<p>ISO 4992-2:2006 specifies the requirements for the ultrasonic examination of steel castings (with ferritic structure) for highly stressed components, and the methods for determining internal discontinuities by the pulse echo technique.</p><p>ISO 4992-2:2006 applies to the ultrasonic examination of steel castings which have usually received a grain-refining heat treatme

10997,IS,,ISO 4993:1987,Steel castings — Radiographic inspection,Pièces moulées en acier — Contrôle radiographique,1987-09-10,1,"['77.040.20','77.140.80']",ISO/TC 17/SC 11,9599,,[38863],"['en','fr']",2,"<p>Specifies the general requirements for the radiography of steel castings by means of X rays or gamma rays. Describes for instance basis of purchase, time of examination, personnel qualifications, shooting sketches, refection/acceptance criteria, foundry responsibility and records.</p>"

38863,IS,,ISO 4993:2009,Steel and iron castings — Radiographic inspection,Pièces moulées en acier ou en fonte — Contrôle radiographique,2009-03-09,2,"['77.040.20','77.140.80']",ISO/TC 17/SC 11,9599,[10997],[59268],"['en','fr']",15,"<p>ISO 4993:2009 specifies the general requirements for the radiography of steel and iron castings by means of X-rays or gamma-rays, in accordance with procedures given in ISO 5579 and ISO 19232 (all parts).</p>"