Withdrawn and superseded ISO standards — page 125 of 246

50308,IS,,ISO 4802-2:2010,Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification,Verrerie — Résistance hydrolytique des surfaces internes des récipients en verre — Partie 2: Détermination par spectrométrie de flamme et classification,2010-03-24,2,['71.040.20'],ISO/TC 76,9599,[10783],[67783],['en'],13,<p>ISO 4802‑2:2010 specifies methods for determining the hydrolytic resistance of the interior surfaces of glass containers when subjected to attack by water at (121 ± 1) °C for (60 ± 1) min. The resistance is measured by determining the amount of sodium and other alkali metal or alkaline earth oxides in the

67783,IS,,ISO 4802-2:2016,Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification,Verrerie — Résistance hydrolytique des surfaces internes des récipients en verre — Partie 2: Détermination par spectrométrie de flamme et classification,2016-06-13,3,['71.040.20'],ISO/TC 76,9599,[50308],[84262],['en'],14,<p>ISO 4802-2:2016 specifies:</p><p>a) methods for determining the hydrolytic resistance of the interior surfaces of glass containers when subjected to attack by water at (121 ± 1) °C for (60 ± 1) min. The resistance is measured by determining the amount of sodium and other alkali metal or alkaline earth o

10784,IS,,ISO 4803:1978,Laboratory glassware — Borosilicate glass tubing,Verrerie de laboratoire — Tubes en verre borosilicaté,1978-09-01,1,['71.040.20'],ISO/TC 48,9599,,[74927],"['en','fr']",2,<p>The requirements specify material including its hydrolytic resistance and thermal coefficient of expansion. The range of sizes and tolerance and external diameters and well thickness are tabled and described. In a second table the limits on bow for different external diameters are specified.</p>

4522,IS,,ISO 481:1977,Textile machinery and accessories — Warper's beams — Terminology and main dimensions,Matériel pour l'industrie textile — Ensouples d'ourdissoir — Terminologie et dimensions principales,1977-09-01,1,"['59.120.20','01.040.59']",ISO/TC 72,9599,,[15168],"['en','fr']",4,

10799,IS,,ISO 4822:1981,Single use blood specimen containers up to 25 ml capacity,Récipients non réutilisables pour échantillons de sang jusqu'à 25 ml de capacité,1981-04-01,1,['11.040.20'],ISO/TC 76,9599,,[13153],"['en','fr']",4,

10800,IS,,ISO 4823:1984,Dental materials — Elastomeric impression materials,Produits dentaires — Produits pour empreintes à base d'élastomères,1984-07-01,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[10801],['en'],13,

10801,IS,,ISO 4823:1992,Dental elastomeric impression materials,"Produits dentaires pour empreintes, à base d'élastomères",1992-03-19,2,['11.060.10'],ISO/TC 106/SC 2,9599,[10800],[24125],"['en','fr']",13,

24125,IS,,ISO 4823:2000,Dentistry — Elastomeric impression materials,"Art dentaire — Produits pour empreintes, à base d'élastomères",2000-12-21,3,['11.060.10'],ISO/TC 106/SC 2,9599,[10801],[60586],"['en','fr']",33,

41310,IS,Amd,ISO 4823:2000/Amd 1:2007,Dentistry — Elastomeric impression materials — Amendment 1,"Art dentaire — Produits pour empreintes, à base d'élastomères — Amendement 1",2007-06-14,3,['11.060.10'],ISO/TC 106/SC 2,9599,,[60586],"['en','fr']",1,

40739,IS,Cor,ISO 4823:2000/Cor 1:2004,Dentistry — Elastomeric impression materials — Technical Corrigendum 1,"Art dentaire — Produits pour empreintes, à base d'élastomères — Rectificatif technique 1",2004-07-16,3,['11.060.10'],ISO/TC 106/SC 2,9599,,[60586],"['en','fr']",2,

60586,IS,,ISO 4823:2015,Dentistry — Elastomeric impression materials,"Médecine bucco-dentaire — Matériaux à empreintes, à base d'élastomères",2015-07-31,4,['11.060.10'],ISO/TC 106/SC 2,9599,"[41310,24125,40739]",[73328],"['en','fr']",39,"<p>ISO 4823:2015 specifies the requirements and tests that the state-of-the art body of knowledge suggests for helping determine whether the elastomeric impression materials, as prepared for retail marketing, are of the quality needed for their intended purposes.</p><p>NOTE This International Standard does not address possible biological hazards associated with the materials. Therefore, interested parties are encouraged to explore ISO 7405 and ISO 1

73328,IS,,ISO 4823:2021,Dentistry — Elastomeric impression and bite registration materials,Médecine bucco-dentaire — Produits pour empreintes et matériaux pour enregistrement des rapports intermaxillaires à base d’élastomères,2021-02-25,5,['11.060.10'],ISO/TC 106/SC 2,9599,[60586],[87802],"['en','fr']",33,<p>This document specifies the requirements and their test methods for elastomeric impression and bite registration materials.</p><p>NOTE This document does not address possible biological hazards associated with the materials. Assessment of these hazards is addressed in ISO 7405 and the ISO 10993 series.</p>

10802,IS,,ISO 4824:1981,Dentistry — Porcelain denture teeth,Art dentaire — Dents en porcelaine,1981-08-01,1,['11.060.10'],ISO/TC 106/SC 2,9599,,[10803],"['en','fr']",7,

10803,IS,,ISO 4824:1993,Dentistry — Ceramic denture teeth,Produits et matériel pour l'art dentaire — Dents en céramique,1993-01-28,2,['11.060.10'],ISO/TC 106/SC 2,9599,[10802],[36124],"['en','fr']",4,"<p>Specifies the requirements and test methods (dimensions, colour and blending of shades, biocompatibility, surface finish, anchorage, resistance to thermal shock, porosity) for ceramic teeth suitable for use in the manufacture of removable prostheses.</p>"

23671,IS,Amd,ISO 4824:1993/Amd 1:1997,Dentistry — Ceramic denture teeth — Amendment 1,Produits et matériel pour l'art dentaire — Dents en céramique — Amendement 1,1997-12-25,2,['11.060.10'],ISO/TC 106/SC 2,9599,,[36124],"['en','fr']",1,

10805,IS,,ISO 4829-1:1986,"Steel and cast iron — Determination of total silicon content — Reduced molybdosilicate spectrophotometric method — Part 1: Silicon contents between 0,05 and 1,0 %","Aciers et fontes — Dosage du silicium total — Méthode spectrophotométrique au molybdosilicate réduit — Partie 1: Teneurs en silicium entre 0,05 et 1,0 %",1986-11-27,1,['77.080.01'],ISO/TC 17/SC 1,9599,,[67990],"['en','fr']",7,"<p>Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. Annex A gives additional information on the international co-operative tests. Annex B represents the precision data graphically.</p>"

10806,IS,,ISO 4829-2:1988,"Steel and iron — Determination of total silicon content — Reduced molybdosilicate spectrophotometric method — Part 2: Silicon contents between 0,01 and 0,05 %","Aciers et fontes — Dosage du silicium total — Méthode spectrophotométrique au molybdosilicate réduit — Partie 2: Teneurs en silicium comprises entre 0,01 et 0,05 %",1988-11-24,1,['77.080.01'],ISO/TC 17/SC 1,9599,,[63303],"['en','fr']",5,"<p>Corresponds part 1 (excluding the silicium contents). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. An annex gives additional information on the international co-operative tests.</p>"

4525,IS,,ISO 483:1988,Plastics — Small enclosures for conditioning and testing using aqueous solutions to maintain relative humidity at constant value,Plastiques — Petites enceintes de conditionnement et d'essai utilisant des solutions aqueuses pour maintenir l'humidité relative à une valeur constante,1988-12-15,1,['83.200'],ISO/TC 61/SC 6,9599,,[33346],"['en','fr']",6,"<p>Establishes guidelines for construction and use of enclosures with volumes less than 200 cubicdecimetre in order to obtain atmospheres of constant relative humidity at given temperatures. It specifies the procedures to be followed to maintain the relative humidities of conditioning and testing atmospheres using saturated a

10811,IS,,ISO 4831:1978,Microbiology — General guidance for the enumeration of coliforms — Most probable number technique at 30 degrees C,Microbiologie — Directives générales pour le dénombrement des coliformes — Technique du nombre le plus probable après incubation à 30 degrés C,1978-08-01,1,['07.100.30'],ISO/TC 34/SC 9,9599,,[10812],"['en','fr']",8,

10812,IS,,ISO 4831:1991,Microbiology — General guidance for the enumeration of coliforms — Most probable number technique,Microbiologie — Directives générales pour le dénombrement des coliformes — Technique du nombre le plus probable,1991-03-14,2,['07.100.30'],ISO/TC 34/SC 9,9599,[10811],[38280],"['en','fr']",11,"<p>This second edition cancels and replaces the first edition (ISO 4831:1978). It is intended to provide general guidance for the examination of products not dealt with by existing International Standards. These guidelines may not be appropriate for some products in every detail, and for some other products it may be necessary to use different methods. The technique described here i

10813,IS,,ISO 4832:1978,Microbiology — General guidance for enumeration of coliforms — Colony count technique at 30 degrees C,Microbiologie — Directives générales pour le dénombrement des coliformes — Méthode par comptage des colonies obtenues à 30 degrés C,1978-02-01,1,['07.100.30'],ISO/TC 34/SC 9,9599,,[10814],"['en','fr']",4,

10814,IS,,ISO 4832:1991,Microbiology — General guidance for the enumeration of coliforms — Colony count technique,Microbiologie — Directives générales pour le dénombrement des coliformes — Méthode par comptage des colonies,1991-03-14,2,['07.100.30'],ISO/TC 34/SC 9,9599,[10813],[38282],"['en','fr']",5,"<p>This second edition cancels and replaces the first edition (ISO 4832:1978). It is intended to provide general guidance for the examination of products not dealt with by existing International Standards. These guidelines may not be appropriate for some products in every detail, and for some other products it may be necessary to use different methods. Gives references, and the definition of th

10815,IS,,ISO 4833:1978,Microbiology — General guidance for enumeration of micro-organisms — Colony count technique at 30 degrees C,Microbiologie — Directives générales pour le dénombrement des micro-organismes — Méthode par comptage des colonies obtenues à 30 degrés C,1978-02-01,1,['07.100.30'],ISO/TC 34/SC 9,9599,,[10816],"['en','fr']",4,

10816,IS,,ISO 4833:1991,Microbiology — General guidance for the enumeration of micro-organisms — Colony count technique at 30 degrees C,Microbiologie — Directives générales pour le dénombrement des micro-organismes — Méthode par comptage des colonies obtenues à 30 degrés C,1991-03-14,2,"['07.100.01','07.100.30']",ISO/TC 34/SC 9,9599,[10815],[34524],"['en','fr']",5,"<p>This second edition cancels and replaces the first edition (ISO 4833:1978). It is intended to provide general guidance for the examination of products not dealt with by existing International Standards. These guidelines may not be appropriate for some products in every detail, and for some other products it may be necessary to

34524,IS,,ISO 4833:2003,Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of microorganisms — Colony-count technique at 30 degrees C,Microbiologie des aliments — Méthode horizontale pour le dénombrement des micro-organismes — Technique de comptage des colonies à 30 degrés C,2003-01-27,3,['07.100.30'],ISO/TC 34/SC 9,9599,[10816],"[59509,53728,50310]","['en','fr']",9,"<p>ISO 4833:2003 specifies a horizontal method for the enumeration of microorganisms, by counting the colonies growing in a solid medium after aerobic incubation at 30 degrees Celsius. Subject to some limitations, it is applicable to products intended for human consumption or the feeding of an

10817,IS,,ISO 4834:1986,Cinematography — Magnetic sound test films excluding striped release prints — Basic technical characteristics,Cinématographie — Films magnétiques sonores étalons à l'exclusion des copies d'exploitation — Caractéristiques techniques de base,1986-05-15,1,['37.060.20'],ISO/TC 36,9599,,[26949],"['en','fr']",6,

4527,IS,,ISO 484-1:1981,"Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 1: Propellers of diameter greater than 2,50 m","Construction navale — Hélices de navires — Tolérances de fabrication — Partie 1: Hélice de diamètre supérieur à 2,50 m",1981-08-01,1,['47.020.20'],ISO/TC 8/SC 3,9599,[4526],"[68083,1367]","['en','fr']",7,"<p>Applies to monobloc, built-up and controllable pitch propellers. Defines the various tolerances, describes also methods for measuring pitch, thickness of the section and gives the accuracy classes.</p>"

4528,IS,,ISO 484-2:1981,"Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive","Construction navale — Hélices de navires — Tolérances de fabrication — Partie 2: Hélices de diamètre compris entre 0,80 et 2,50 m inclus",1981-08-01,1,['47.020.20'],ISO/TC 8/SC 3,9599,[4526],"[68084,1448]","['en','fr']",6,"<p>Applies to monobloc, built-up and controllable pitch propellers. Defines the various tolerances, describes also methods for measuring pitch, thickness of the section and gives the accuracy classes.</p>"

10831,IS,,ISO 4848:1980,Concrete — Determination of air content of freshly mixed concrete — Pressure method,Béton — Détermination de la teneur en air du béton frais — Méthode de la compressibilité,1980-03-01,1,['91.100.30'],ISO/TC 71,9599,,[29098],"['en','fr']",9,"<p>Specifies a method for the determination of the air content of freshly mixed concrete from observation of the change in volume of concrete with a change in pressure. The method is intended for use with concretes and mortars made with relatively dense aggregates for which the aggregate correction factor can be satisfactorily determined by the technique described in clause 5. It is not applicable to concretes made with lightweight

10832,IS,,ISO 4849:1981,Personal eye-protectors — Specifications,Protecteurs individuels de l'oeil — Spécifications,1981-12-01,1,['13.340.20'],ISO/TC 94/SC 6,9599,,[62527],"['en','fr']",8,"<p>Deals with general considerations, such as: designation, classification, requirements applicable to all types, some particular requirements, sampling, identification. The transmittance requirements and methods of test for particular uses are given in the International Standards listed in clause 3. Gives functional requirements for the various types used mainly in industry. Applies to all types used against various hazards which are likely to damage the eye or impair vision, with the exception of nuclear

10833,IS,,ISO 4850:1979,Personal eye-protectors for welding and related techniques — Filters — Utilisation and transmittance requirements,Protecteurs individuels de l'oeil pour le soudage et les techniques connexes — Filtres — Utilisation et spécifications de transmission,1979-07-01,1,['13.340.20'],ISO/TC 94/SC 6,9599,,[69395],"['en','fr']",5,"<p>Specifies the numbering of and transmittance requirements for filters intended to protect operatives performing manual work involving welding, braze welding, arc gouging and thermal cutting. It also gives guidance on the selection and use of these filters. Optical test methods are the subject of ISO 4854. Non-optical test methods are the subject of

10834,IS,,ISO 4851:1979,Personal eye-protectors — Ultra-violet filters — Utilisation and transmittance requirements,Protection individuelle de l'oeil — Filtres pour l'ultraviolet — Utilisation et spécifications de transmission,1979-02-01,1,['13.340.20'],ISO/TC 94/SC 6,9599,,[62527],"['en','fr']",2,<p>Gives the numbering of and transmittance requirements for filters. It defines guidance and their selection and use. Optical test methods form the subject of ISO 4854. Non-optical test methods form the subject of ISO 4855. The symbol for filters includes a code number and the shade number corresponding to the filter. The determination of transmittance is described in clause 5 of ISO 4854.</p> 108

10835,IS,,ISO 4852:1978,Personal eye-protectors — Infra-red filters — Utilisation and transmittance requirements,Protection individuelle de l'oeil — Filtres pour l'infrarouge — Utilisation et spécifications de transmission,1978-10-01,1,['13.340.20'],ISO/TC 94/SC 6,9599,,[62527],"['en','fr']",4,<p>Gives the numbering of and transmittance requirements for filters. It also defines guidance on their selection and use. Optical test methods form subject of ISO 4854. Non-optical test methods form the subject of ISO 4855. The symbol for filters includes a code number of transmittance is described in clause 5 of ISO 4854.</p>

10837,IS,,ISO 4854:1981,Personal eye-protectors — Optical test methods,Protecteurs individuels de l'oeil — Méthodes d'essai optiques,1981-05-01,1,['13.340.20'],ISO/TC 94/SC 6,9599,,"[62786,62785]","['en','fr']",17,"<p>Specifies the optical test methods the requirements for which are given in ISO 4849 to ISO 4853. The other test methods are given in ISO 4855. The following tests are described: test for refractive, astigmatic and prismatic powers, diffusion test, test for quality of material and surface, determination of transmittance. Annex A describes testing of unmounted oculars. Annexes B and C describe two other optional methods for prismatic power measurement.</p>"

10838,IS,,ISO 4855:1981,Personal eye-protectors — Non-optical test methods,Protecteurs individuels de l'oeil — Méthodes d'essai autres qu'optiques,1981-04-01,1,['13.340.20'],ISO/TC 94/SC 6,9599,,[62787],"['en','fr']",9,"<p>Specifies the optical test methods the requirements for which are given in ISO 4849 to ISO 4853. The other test methods are given in ISO 4855. The following tests are described: test for robustness of the protectors, test for stability at elevated temperature, test for resistance to ultraviolet radiation, test for ignition, test for resistance to corrosion, test for suitability for disinfection, test for resistance to high-speed particles, test for non-adherence of molten

10839,IS,,ISO 4856:1982,Personal eye-protectors — Synoptic tables of requirements for oculars and eye-protectors,Protecteurs individuels de l'oeil — Tableaux récapitulatifs des spécifications pour les oculaires et les protecteurs de l'oeil,1982-12-01,1,['13.340.20'],ISO/TC 94/SC 6,9599,,[62527],"['en','fr']",4,"<p>Provides a survey of the requirements which have to be met by the various types as well as by the combination on them with the exception of filters as protectors against laser radiation, specifications of which are given in ISO 6161. Requirements to be met by the different types of oculars are given in table 1, requirements for frames and mounted oculars are given in table 2.</p>"

10840,IS,,ISO 4858:1982,Wood — Determination of volumetric shrinkage,Bois — Détermination du retrait volumique,1982-12-01,1,['79.040'],ISO/TC 218,9599,,"[52518,60076]","['en','fr']",3,"<p>Two methods are specified: the stereometric method used for test pieces made in accordance with ISO 4469, and the mercury volumenometer method used for test pieces of any shape. References are made to ISO 3129, ISO 3130, and ISO 4469.</p>"

10841,IS,,ISO 4859:1982,Wood — Determination of radial and tangential swelling,Bois — Détermination du gonflement radial et tangentiel,1982-12-01,1,['79.040'],ISO/TC 218,9599,,"[52519,60077]","['en','fr']",2,"<p>Specifies a method which determines the linear swelling of test pieces after drying at a moisture content in equilibrium with the normal environment and at a moisture content, equal to or greater than the saturation point of the cellular walls of wood.</p>"

4530,IS,,ISO 486:1982,Cinematography — 16 mm motion-picture film perforated 8 mm Type R — Cutting and perforating dimensions,Cinématographie — Film cinématographique 16 mm perforé 8 mm type R — Dimensions de coupe et de perforation,1982-08-01,2,['37.060.20'],ISO/TC 36,9599,,[4531],"['en','fr']",3,

10842,IS,,ISO 4860:1982,Wood — Determination of volumetric swelling,Bois — Détermination du gonflement volumique,1982-12-01,1,['79.040'],ISO/TC 218,9599,,"[52520,60078]","['en','fr']",3,"<p>Two methods are specified: the stereometric method used for test pieces made in accordance with ISO 4859, and the mercury volumenometer method used for test pieces of any shape. Determines the change in volume of test pieces after drying, at a moisture content in equilibrium with the normal environment and at a moisture content, equal to or greater than the saturation point of the cellular walls of wood.</p>"

10845,IS,,ISO 4866:1990,Mechanical vibration and shock — Vibration of buildings — Guidelines for the measurement of vibrations and evaluation of their effects on buildings,Vibrations et chocs mécaniques — Vibrations des bâtiments — Lignes directrices pour le mesurage des vibrations et évaluation de leurs effets sur les bâtiments,1990-08-16,1,"['17.160','91.120.25']",ISO/TC 108/SC 2,9599,,[38967],"['en','fr']",18,

10846,IS,Amd,ISO 4866:1990/Amd 1:1994,Mechanical vibration and shock — Vibration of buildings — Guidelines for the measurement of vibrations and evaluation of their effects on buildings — Amendment 1,Vibrations et chocs mécaniques — Vibrations des bâtiments — Lignes directrices pour le mesurage des vibrations et évaluation de leurs effets sur les bâtiments — Amendement 1,1994-11-24,1,"['17.160','91.120.25']",ISO/TC 108/SC 2,9599,,[38967],['en'],7,<p>Adds a new annex as annex D and changes the present annex D to annex E.</p>

1364,IS,Amd,ISO 4866:1990/Amd 2:1996,Mechanical vibration and shock — Vibration of buildings — Guidelines for the measurement of vibrations and evaluation of their effects on buildings — Amendment 2,Vibrations et chocs mécaniques — Vibrations des bâtiments — Lignes directrices pour le mesurage des vibrations et évaluation de leurs effets sur les bâtiments — Amendement 2,1996-12-12,1,"['17.160','91.120.25']",ISO/TC 108/SC 2,9599,,[38967],"['en','fr']",8,<p>Adds the annex E and changes the present annex E to annex F.</p>

10847,IS,,ISO 4867:1984,Code for the measurement and reporting of shipboard vibration data,Code pour l'exécution des mesurages de vibrations à bord des navires et présentation des résultats,1984-11-01,1,"['17.160','47.020.01']",ISO/TC 108/SC 2,9599,,[37398],"['en','fr']",18,"<p>Establishes uniform procedures for gathering and presenting data on hull vibration, for vibration of propulsion-shaft systems. Gives general principles of vibration measurement to improve vibration engineering.</p>"

10848,IS,,ISO 4868:1984,Code for the measurement and reporting of local vibration data of ship structures and equipment,Code pour l'exécution des mesurages des vibrations locales des structures et équipements de navires et présentation des résultats,1984-11-01,1,"['17.160','47.020.01']",ISO/TC 108/SC 2,9599,,[37398],"['en','fr']",13,"<p>Establishes uniform procedures for gathering and presenting data of local structural elements, superstructures, decks, bulkheads, masts, machines, foundations in sea-going merchant ships. Gives general principles of vibration measurement to improve vibration engineering.</p>"

10850,IS,,ISO 4869-1:1990,Acoustics — Hearing protectors — Part 1: Subjective method for the measurement of sound attenuation,Acoustique — Protecteurs individuels contre le bruit — Partie 1: Méthode subjective de mesurage de l'affaiblissement acoustique,1990-12-20,1,['13.340.20'],ISO/TC 43/SC 1,9599,[10849],"[27310,65581]","['en','fr']",7,<p>Specifies a method for measuring sound attenuation at the threshold of hearing. The procedure is designed to yield values close to the maximum attenuation which are not normally attained under field conditions. The values reflect the attenuating characteristics only to the extent that users wear the device in the same manner as did the test subjects. Dat

10849,IS,,ISO 4869:1981,Acoustics — Measurement of sound attenuation of hearing protectors — Subjective method,Acoustique — Mesurage d'affaiblissement acoustique des protecteurs individuels contre le bruit — Méthode subjective,1981-12-01,1,['13.340.20'],ISO/TC 43,9599,,[10850],"['en','fr']",4,

10851,IS,,ISO 4869-2:1994,Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn,Acoustique — Protecteurs individuels contre le bruit — Partie 2: Estimation des niveaux de pression acoustique pondérés A en cas d'utilisation de protecteurs individuels contre le bruit,1994-08-18,1,['13.340.20'],ISO/TC 43/SC 1,9599,,"[42871,65582]","['en','fr']",12,"<p>Describes three methods (the octave-band, HML and SNR methods) for estimating the A-weighted sound pressure levels effective when hearing protectors are worn. The methods are applicable to either the sound pressure level or the equivalent continuous sound pressure level o

44791,IS,Cor,ISO 4869-2:1994/Cor 1:2006,Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn — Technical Corrigendum 1,Acoustique — Protecteurs individuels contre le bruit — Partie 2: Estimation des niveaux de pression acoustique pondérés A en cas d'utilisation de protecteurs individuels contre le bruit — Rectificatif technique 1,2006-09-11,1,['13.340.20'],ISO/TC 43/SC 1,9599,,[65582],"['en','fr']",1,

4532,IS,,ISO 487:1976,"Steel roller chains, type S 32 to S 88, with their associated chain wheels","Chaînes à rouleaux en acier, types S 32 à S 88 et roues dentées correspondantes",1976-11-01,1,['21.220.30'],ISO/TC 100,9599,,[4533],"['en','fr']",11,

4533,IS,,ISO 487:1984,"Steel roller chains, types S and C, attachments and chain wheels","Chaînes à rouleaux en acier, types C et S, plaques-attaches et roues dentées",1984-08-01,2,['21.220.30'],ISO/TC 100,9599,[4532],[25830],"['en','fr']",17,

10854,IS,,ISO 4871:1984,Acoustics — Noise labelling of machinery and equipment,Acoustique — Étiquetage du bruit des équipements et des machines,1984-08-01,1,"['21.020','17.140.20']",ISO/TC 43/SC 1,9599,,[10855],"['en','fr']",5,

10856,IS,,ISO 4872:1978,Acoustics — Measurement of airborne noise emitted by construction equipment intended for outdoor use — Method for determining compliance with noise limits,Acoustique — Mesure du bruit aérien émis par les engins de construction destinés à être utilisés à l'air libre — Méthode de vérification de la conformité en ce qui concerne les limites de bruit,1978-06-01,1,"['91.220','17.140.20']",ISO/TC 43/SC 1,9599,,"[35439,52055]","['en','fr']",11,<p>Describes a procedure for measuring the weighted sound pressure levels at prescribed microphone positions in the proximity of a device or machine. The A-weighted sound power level of the source is calculated from the measured value

10857,IS,,ISO 4873:1979,Information processing — 8- bit coded character set for information interchange,Traitement de l'information — Jeu de caractères codés à 8 éléments pour l'échange d'information,1979-02-01,1,['35.040.10'],ISO/IEC JTC 1/SC 2,9599,,[10858],"['en','fr']",4,

10860,IS,Amd,ISO 4873:1979/Amd 1:1980,Information processing — 8- bit coded character set for information interchange — Amendment 1,Traitement de l'information — Jeu de caractères codés à 8 éléments pour l'échange d'information — Amendement 1,1980-07-01,1,['35.040.10'],ISO/IEC JTC 1/SC 2,9599,,[10858],['en'],1,

10858,IS,,ISO 4873:1986,Information processing — ISO 8-bit code for information interchange — Structure and rules for implementation,Traitement de l'information — Code ISO à 8 éléments pour l'échange d'information — Structure et règles de matérialisation,1986-07-31,2,['35.040.10'],ISO/IEC JTC 1/SC 2,9599,"[10857,10860]",[10859],"['en','fr']",17,

10861,IS,,ISO 4874:1981,Tobacco — Sampling of batches of raw material — General principles,Tabac — Échantillonnage des lots de matières premières — Principes généraux,1981-08-01,1,['65.160'],ISO/TC 126,9599,,[28321],"['en','fr']",4,

28321,IS,,ISO 4874:2000,Tobacco — Sampling of batches of raw material — General principles,Tabac — Échantillonnage des lots de matières premières — Principes généraux,2000-10-26,2,['65.160'],ISO/TC 126,9599,[10861],[78244],"['en','fr']",8,

10862,IS,,ISO 4875-1:1978,Metal cutting band saw blades — Part 1: Definitions and terminology,Lames de scies à ruban à métaux — Partie 1: Définitions et terminologie,1978-05-01,1,"['25.100.40','01.040.25']",ISO/TC 29/SC 9,9599,,[41854],"['en','fr']",8,

10863,IS,,ISO 4875-2:1978,Metal cutting band saw blades — Part 2: Basic dimensions and tolerances,Lames de scies à ruban à métaux — Partie 2: Dimensions de base et tolérances,1978-11-01,1,['25.100.40'],ISO/TC 29/SC 9,9599,,[41855],"['en','fr']",2,

10864,IS,,ISO 4875-3:1978,Metal cutting band saw blades — Part 3: Characteristics relating to each type of blade,Lames de scies à ruban à métaux — Partie 3: Caractéristiques des différents types de lames,1978-11-01,1,['25.100.40'],ISO/TC 29,9599,,[41855],"['en','fr']",6,

4534,IS,,ISO 488:1983,Milk — Determination of fat content — Gerber butyrometers,Lait — Détermination de la teneur en matière grasse — Butyromètres Gerber,1983-12-01,1,['67.260'],ISO/TC 34/SC 5,9599,,[51018],"['en','fr']",10,"<p>Specifies the characteristics of seven types of butyrometer, their various scale ranges, construction, scales and their graduations, reference temperature and the inscriptions to be marked on the bulb of the butyrometer. Annex A gives information on recommended stoppers and Annex B deals with recommended methods for the determintion of scale errors of butyrometers.</p>"

51018,IS,,ISO 488:2008,Milk — Determination of fat content — Gerber butyrometers,Lait — Détermination de la teneur en matière grasse — Butyromètres Gerber,2008-08-26,2,['67.260'],ISO/TC 34/SC 5,9599,[4534],[65935],"['en','fr','ru']",14,"<p>ISO 488|IDF 105:2008 specifies the characteristics of seven types of butyrometer for use in the determination of the fat content of whole milk, partly skimmed milk and skimmed milk by the Gerber method specified in ISO 2446.</p>"

10873,IS,,ISO 4880-1:1982,Burning behaviour of textiles and textile products — Vocabulary,Comportement au feu des textiles et des produits textiles — Vocabulaire,1982-12-01,1,"['13.220.40','59.080.01','01.040.59','01.040.13']",ISO/TC 38,9599,,[10870],"['en','fr']",7,

10870,IS,,ISO 4880:1984,Burning behaviour of textiles and textile products — Vocabulary,Comportement au feu des textiles et des produits textiles — Vocabulaire,1984-07-01,1,"['13.220.40','59.080.01','01.040.59','01.040.13']",ISO/TC 38,9599,[10873],[24009],"['en','fr']",8,

10871,IS,Amd,ISO 4880:1984/Amd 1:1992,Burning behaviour of textiles and textile products — Vocabulary — Amendment 1,Comportement au feu des textiles et des produits textiles — Vocabulaire — Amendement 1,1992-12-10,1,"['13.220.40','59.080.01','01.040.59','01.040.13']",ISO/TC 38,9599,,[24009],"['en','fr']",3,

10872,IS,Amd,ISO 4880:1984/Amd 2:1993,Burning behaviour of textiles and textile products — Vocabulary — Amendment 2,Comportement au feu des textiles et des produits textiles — Vocabulaire — Amendement 2,1993-08-05,1,"['13.220.40','59.080.01','01.040.59','01.040.13']",ISO/TC 38,9599,,[24009],"['en','fr']",1,

10877,IS,,ISO 4884:1978,Hardmetals — Sampling and testing of powders using sintered test pieces,Métaux-durs — Échantillonnage et essais des poudres au moyen d'éprouvettes frittées,1978-07-01,1,['77.160'],ISO/TC 119/SC 4,9599,,[74886],"['en','fr']",1,"<p>Relates to the sampling and testing of powder mixtures for the manucacture of hardmetals, using sintered test pieces, and to the preparation of test pieces.</p>"

10878,IS,,ISO 4885:1996,Ferrous products — Heat treatments — Vocabulary,Produits ferreux — Traitements thermiques — Vocabulaire,1996-03-14,1,"['25.200','01.040.77','77.140.01','01.040.25']",ISO/TC 17,9599,,[63072],"['en','fr']",43,<p>Defines the terms used in the heat treatment of ferrous products. The vocabulary is divided into a main part and a complementary section. The complementary section contains the definitions of terms necessary to understand the main part.</p>

63072,IS,,ISO 4885:2017,Ferrous materials — Heat treatments — Vocabulary,Matériaux ferreux — Traitements thermiques — Vocabulaire,2017-02-14,2,"['25.200','01.040.77','77.140.01','01.040.25']",ISO/TC 17,9599,[10878],[74642],"['en','fr']",41,"<p>ISO 4885:2017 defines important terms used in the heat treatment of ferrous materials.</p><p>NOTE The term ferrous materials include products and workpieces of steel and cast iron.</p><p>Annex A provides an alphabetical list of terms defined in this document, as well as their equivalents in French, German, Chinese and Japanese.</p><p>Table 1 shows the various iron-carbon (Fe-C) phases.</p>"

74642,IS,,ISO 4885:2018,Ferrous materials — Heat treatments — Vocabulary,Matériaux ferreux — Traitements thermiques — Vocabulaire,2018-02-28,3,"['25.200','01.040.77','77.140.01','01.040.25']",ISO/TC 17,9599,[63072],[87711],"['en','fr']",41,"<p>ISO 4885:2018 defines important terms used in the heat treatment of ferrous materials.</p><p>NOTE The term ferrous materials include products and workpieces of steel and cast iron.</p><p>Annex A provides an alphabetical list of terms defined in this document, as well as their equivalents in French, German, Chinese and Japanese.</p><p>Table 1 shows the various iron-carbon (Fe-C) phases.</p>"

4536,IS,,ISO 489:1983,Plastics — Determination of the refractive index of transparent plastics,Plastiques — Détermination de l'indice de réfraction des plastiques transparents,1983-12-01,1,['83.080.01'],ISO/TC 61,9599,,[1772],"['en','fr']",3,

1772,IS,,ISO 489:1999,Plastics — Determination of refractive index,Plastiques — Détermination de l'indice de réfraction,1999-04-22,2,['83.080.01'],ISO/TC 61/SC 5,9599,[4536],[81837],"['en','fr']",11,"<p>This International Standard specifies two test methods for determining the refractive index of plastics, namely:</p><p> Method A: a refractometric method for measuring the refractive index of moulded parts, cast or extruded sheet</p><p>or film, by means of a refractometer. It is applicable not only to isotropic transparent, translucent, coloured or</p><p>opaque materials but also to anisotropic materials. The method is recommended when great accuracy is</p><p>required. It is not applicable t

10896,IS,,ISO 4892-1:1994,Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance,Plastiques — Méthodes d'exposition à des sources lumineuses de laboratoire — Partie 1: Guide général,1994-05-05,1,['83.080.01'],ISO/TC 61/SC 6,9599,[10894],[26812],"['en','fr']",7,

26812,IS,,ISO 4892-1:1999,Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance,Plastiques — Méthodes d'exposition à des sources lumineuses de laboratoire — Partie 1: Guide général,1999-07-15,2,['83.080.01'],ISO/TC 61/SC 6,9599,[10896],"[41859,60048,57968]","['en','fr']",15,

60048,IS,,ISO 4892-1:2016,Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance,Plastiques — Méthodes d'exposition à des sources lumineuses de laboratoire — Partie 1: Lignes directrices générales,2016-04-29,3,['83.080.01'],ISO/TC 61/SC 6,9599,[26812],[83801],"['en','fr']",25,"<p>ISO 4892-1:2016 provides information and general guidance relevant to the selection and operation of the methods of exposure described in detail in subsequent parts. It also describes general performance requirements for devices used for exposing plastics to laboratory light sources. Information regarding performance requirements is for producers of artificial accelerated weathering or

10894,IS,,ISO 4892:1981,Plastics — Methods of exposure to laboratory light sources,Plastiques — Méthodes d'exposition à des sources lumineuses en laboratoire,1981-05-01,1,['83.080'],ISO/TC 61,9599,"[5264,5265]","[10898,10899,10896,10897]","['en','fr']",18,

10897,IS,,ISO 4892-2:1994,Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc sources,Plastiques — Méthodes d'exposition à des sources lumineuses de laboratoire — Partie 2: Sources à arc au xénon,1994-05-12,1,['83.080.01'],ISO/TC 61/SC 6,9599,[10894],[33342],"['en','fr']",7,"<p>Specifies methods for exposing to a xenon-arc light source under controlled environmental conditions. The procedure may include measurements of the irradiance and radiant exposure at the surface of the specimen. It is recommended that a similar material of known behaviour be exposed simultaneously with the experimental material as a reference. A xenon arc, when fitted with suitable filters,

33342,IS,,ISO 4892-2:2006,Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps,Plastiques — Méthodes d'exposition à des sources lumineuses de laboratoire — Partie 2: Lampes à arc au xénon,2006-01-30,2,['83.080.01'],ISO/TC 61/SC 6,9599,[10897],[55481],"['en','fr']",10,"<p>ISO 4892-2:2006 specifies methods for exposing specimens to xenon-arc light in the presence of moisture to reproduce the weathering effects that occur when materials are exposed in actual end-use environments in daylight or daylight filtered through window glass.</p><p>The specimens are exposed to filtered xenon-arc light under controlled conditions (temperature, humidity and/or wetting). Vari

45087,IS,Amd,ISO 4892-2:2006/Amd 1:2009,Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps — Amendment 1,Plastiques — Méthodes d'exposition à des sources lumineuses de laboratoire — Partie 2: Lampes à arc au xénon — Amendement 1,2009-07-02,2,['83.080.01'],ISO/TC 61/SC 6,9599,,[55481],"['en','fr']",2,

10898,IS,,ISO 4892-3:1994,Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps,Plastiques — Méthodes d'exposition à des sources lumineuses de laboratoire — Partie 3: Lampes fluorescentes UV,1994-09-22,1,['83.080.01'],ISO/TC 61/SC 6,9599,[10894],[33343],"['en','fr']",6,<p>Specifies methods for exposing specimens to different types of fluorescent UV lamp.</p>

33343,IS,,ISO 4892-3:2006,Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps,Plastiques — Méthodes d'exposition à des sources lumineuses de laboratoire — Partie 3: Lampes fluorescentes UV,2006-02-16,2,['83.080.01'],ISO/TC 61/SC 6,9599,[10898],[55482],"['en','fr']",14,"<p>ISO 4892-3:2006 specifies methods for exposing specimens to fluorescent UV radiation and water in apparatus to designed reproduce the weathering effects that occur when materials are exposed in actual end-use environments to daylight, or to daylight through window glass.</p><p>The specimens are exposed to fluorescent UV lamps under controlled environmental conditions (temperature, humid

55482,IS,,ISO 4892-3:2013,Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps,Plastiques — Méthodes d'exposition à des sources lumineuses de laboratoire — Partie 3: Lampes fluorescentes UV,2013-08-20,3,['83.080.01'],ISO/TC 61/SC 6,9599,[33343],[67793],"['en','fr']",15,"<p>ISO 4892-3:2013 specifies methods for exposing specimens to fluorescent UV radiation, heat and water in apparatus designed to simulate the weathering effects that occur when materials are exposed in actual end-use environments to global solar radiation, or to solar radiation through window glass.</p><p>The specimens are exposed to fluorescent UV lamps under controlled environmental cond

67793,IS,,ISO 4892-3:2016,Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps,Plastiques — Méthodes d'exposition à des sources lumineuses de laboratoire — Partie 3: Lampes fluorescentes UV,2016-02-15,4,['83.080.01'],ISO/TC 61/SC 6,9599,[55482],[83802],"['en','fr']",16,"<p>ISO 4892-3:2016 specifies methods for exposing specimens to fluorescent UV radiation, heat and water in apparatus designed to simulate the weathering effects that occur when materials are exposed in actual end-use environments to global solar radiation, or to solar radiation through window glass.</p><p>The specimens are exposed to fluorescent UV lamps under controlled environmental cond

10899,IS,,ISO 4892-4:1994,Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps,Plastiques — Méthodes d'exposition à des sources lumineuses de laboratoire — Partie 4: Lampes à arc au carbone,1994-05-12,1,['83.080.01'],ISO/TC 61/SC 6,9599,[10894],[33344],"['en','fr']",7,<p>Specifies methods for exposing to a carbon-arc light source under controlled environmental conditions. The procedure may include measurements of the irradiance and radiant exposure at the surface of the specimen. It is recommended that a similar material of known behaviour be exposed simultaneously with the experimental material as a reference. General guidance is given in ISO 4892

33344,IS,,ISO 4892-4:2004,Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps,Plastiques — Méthodes d'exposition à des sources lumineuses de laboratoire — Partie 4: Lampes à arc au carbone,2004-09-07,2,['83.080.01'],ISO/TC 61/SC 6,9599,[10899],[63681],['en'],7,"<p>ISO 4892-4:2004 specifies methods for exposing specimens to open-flame carbon-arc lamps in the presence of moisture to reproduce the weathering effects that occur when materials are exposed in actual end-use environments in daylight or daylight filtered through window glass.</p><p>The specimens are exposed to filtered open-flame carbon-arc light under controlled environmental conditions

42229,IS,Cor,ISO 4892-4:2004/Cor 1:2005,Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps — Technical Corrigendum 1,Plastiques — Méthodes d'exposition à des sources lumineuses de laboratoire — Partie 4: Lampes à arc au carbone — Rectificatif technique 1,2005-11-04,2,['83.080.01'],ISO/TC 61/SC 6,9599,,[63681],['en'],4,

63681,IS,,ISO 4892-4:2013,Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps,Plastiques — Méthodes d'exposition à des sources lumineuses de laboratoire — Partie 4: Lampes à arc au carbone,2013-08-05,3,['83.080.01'],ISO/TC 61/SC 6,9599,"[42229,33344]",[88063],['en'],10,<p>ISO 4892-4:2013 specifies methods for exposing specimens to open-flame carbon-arc lamps in the presence of moisture to reproduce the weathering effects that occur when materials are exposed in actual end-use environments in daylight or daylight filtered through window glass.</p>

10901,IS,,ISO 4894-1:1979,Plastics — Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials — Part 1: Designation,Plastiques — Matières à mouler et à extruder à base de copolymère de styrène et d'acrylonitrile (SAN) — Partie 1: Désignation,1979-12-01,1,['83.080.20'],ISO/TC 61,9599,,[10902],"['en','fr']",2,

10902,IS,,ISO 4894-1:1990,Plastics — Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials — Part 1: Designation,Plastiques — Matières à mouler et à extruder à base de copolymère de styrène et d'acrylonitrile (SAN) — Partie 1: Désignation,1990-10-04,2,['83.080.20'],ISO/TC 61/SC 9,9599,[10901],[26808],"['en','fr']",4,

26808,IS,,ISO 4894-1:1997,Plastics — Styrene/acrylonitrile (SAN) moulding and extrusion materials — Part 1: Designation system and basis for specifications,Plastiques — Styrène/acrylonitrile (SAN) pour moulage et extrusion — Partie 1: Système de désignation et base de spécification,1997-07-03,3,['83.080.20'],ISO/TC 61/SC 9,9599,[10902],[63848],"['en','fr']",6,

10903,IS,,ISO 4894-2:1981,Plastics — Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials — Part 2: Determination of properties,Plastiques — Matières à mouler et à extruder à base de copolymère de styrène et d'acrylonitrile (SAN) — Partie 2: Détermination des caractéristiques,1981-07-01,1,['83.080.20'],ISO/TC 61,9599,,[10904],"['en','fr']",5,

10904,IS,,ISO 4894-2:1995,Plastics — Styrene/acrylonitrile (SAN) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties,Plastiques — Styrène/acrylonitrile (SAN) pour moulage et extrusion — Partie 2: Préparation des éprouvettes et détermination des propriétés,1995-04-27,2,['83.080.20'],ISO/TC 61/SC 9,9599,[10903],[77539],"['en','fr']",6,<p>Cancels and replaces the first edition (1981). Specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of SAN moulding and extrusion materials. Gives requirements for handling test material and for conditioning both the test material before mouldin

10906,IS,,ISO 4895:1987,Plastics — Liquid epoxide resins — Determination of tendency to crystallize,Plastiques — Résines époxydes liquides — Détermination de la tendance à la cristallisation,1987-04-30,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[25207],"['en','fr']",2,

25207,IS,,ISO 4895:1997,Plastics — Liquid epoxy resins — Determination of tendency to crystallize,Plastiques — Résines époxydes liquides — Détermination de la tendance à la cristallisation,1997-11-06,2,['83.080.10'],ISO/TC 61/SC 12,9599,[10906],[63354],"['en','fr']",4,

10907,IS,,ISO 4896:1979,Plastics — Melamine/phenolic moulding materials — Specification,Plastiques — Matières à mouler mélamine/phénol — Spécification,1979-08-01,1,['83.080.10'],ISO/TC 61/SC 12,9599,,[10908],"['en','fr']",3,

10908,IS,,ISO 4896:1990,Plastics — Melamine/phenolic moulding materials — Specification,Plastiques — Matières à mouler mélamine/phénol — Spécification,1990-09-20,2,['83.080.10'],ISO/TC 61/SC 12,9599,[10907],"[24618,24619,24620]","['en','fr']",5,"<p>Specifies requirements for two types of melamine/phenolic moulding materials, i.e. type MPF A: general purpose, and type MPF C: heat-resistant. These types are further subdivided in 5 grades which are differing from each other in the fillers used and in several property values. They are specified in a table with their maximum or minimum property requirements.</p>"

10911,IS,,ISO 4898:1984,Cellular plastics — Specification for rigid cellular materials used in the thermal insulation of buildings,Plastiques alvéolaires — Spécifications des matériaux rigides utilisés dans l'isolation thermique des bâtiments,1984-10-01,1,['83.100'],ISO/TC 61/SC 10,9599,,[31266],"['en','fr']",6,

10912,IS,Add,ISO 4898:1984/Add 1:1988,Cellular plastics — Specification for rigid cellular materials used in the thermal insulation of buildings — Addendum 1: Phenol-formaldehyde cellular plastics (RC/PF),Plastiques alvéolaires — Spécifications des matériaux rigides utilisés dans l'isolation thermique des bâtiments — Additif 1: Mousse phénol-formaldéhyde (AR/PF),1988-12-29,1,['83.100'],ISO/TC 61/SC 10,9599,,[31266],"['en','fr']",3,

10913,IS,Add,ISO 4898:1984/Add 2:1988,Cellular plastics — Specification for rigid cellular materials used in the thermal insulation of buildings — Addendum 2: Labelling and marking of products,Plastiques alvéolaires — Spécifications des matériaux rigides utilisés dans l'isolation thermique des bâtiments — Additif 2: Etiquetage et marquage des produits,1988-12-15,1,['83.100'],ISO/TC 61/SC 10,9599,,[31266],"['en','fr']",1,