Withdrawn and superseded ISO standards — page 118 of 246

41861,IS,Cor,ISO 4287:1997/Cor 2:2005,"Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters — Technical Corrigendum 2","Spécification géométrique des produits (GPS) — État de surface: Méthode du profil — Termes, définitions et paramètres d'état de surface — Rectificatif technique 2",2005-03-08,1,"['17.040.20','01.040.17']",ISO/TC 213,9599,,"[67654,72226]","['en','fr']",2,

10134,IS,,ISO 4288:1985,Rules and procedures for the measurement of surface roughness using stylus instruments,Règles et procédures pour le mesurage de la rugosité de surface avec des instruments à palpeur,1985-05-02,1,['17.040.20'],ISO/TC 213,9599,,[2096],"['en','fr']",6,

2096,IS,,ISO 4288:1996,Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texture,Spécification géométrique des produits (GPS) — État de surface: Méthode du profil — Règles et procédures pour l'évaluation de l'état de surface,1996-08-08,2,['17.040.20'],ISO/TC 213,9599,[10134],[72228],"['en','fr']",8,"<p>Specifies the rules for comparison of the measured values with the tolerance limits for surface texture parameters defined in ISO 4287, ISO 12085, ISO 13565-2 and ISO 13565-3. It also gives rules for measuring roughness profile parameters by using stylus instruments according to ISO 3274. Replaces the first edition.<

29875,IS,Cor,ISO 4288:1996/Cor 1:1998,Geometrical Product Specifications (GPS) — Surface texture: Profile method — Rules and procedures for the assessment of surface texture — Technical Corrigendum 1,Spécification géométrique des produits (GPS) — État de surface: Méthode du profil — Règles et procédures pour l'évaluation de l'état de surface — Rectificatif technique 1,1998-06-04,2,['17.040.20'],ISO/TC 213,9599,,[72228],"['en','fr']",1,

10135,IS,,ISO 4291:1985,Methods for the assessement of departure from roundness — Measurement of variations in radius,Méthodes d'évaluation des écarts de circularité — Mesurage des variations de rayon,1985-09-12,1,['17.040.20'],ISO/TC 213,9599,,[21979],"['en','fr']",18,"<p>Establishes types of contact (stylus) instruments to be used, recommendations for their use, procedures for calibration of instruments and verification of their characteristics. Applies to a profile transformation, obtained under reference conditions. Departures from roundness of the measured profile, procedure, calibration and determination of systematic errors of rotation are dealt with in annexes A to D, respectively. A

10136,IS,,ISO 4292:1985,Methods for the assessment of departure from roundness — Measurement by two- and three-point methods,Méthodes d'évaluation des écarts de circularité — Mesurage par les méthodes en deux et trois points,1985-07-11,1,['17.040.20'],ISO/TC 213,9599,,[26614],"['en','fr']",8,"<p>Determines the out-of-roundness by means of two-point measurement (measurement of diameters), by means of three-point measurement, summit (symmetrical or asymmetrical setting), and by means of three-point measurement, rider (symmetrical setting). Suitable for routine or in-process inspection because of the methods specified in ISO 4292 are faster and cheaper (than the procedure in ISO 4291).</p>" 101

10138,IS,,ISO 4294:1978,Manganese ores and concentrates — Determination of copper content — Extraction-photometric and photometric methods,Minerais et concentrés de manganèse — Dosage du cuivre — Méthodes photométriques avec et sans extraction,1978-08-01,1,['73.060.20'],ISO/TC 65,9599,,[10139],"['en','fr']",5,

10139,IS,,ISO 4294:1984,Manganese ores and concentrates — Determination of copper content — Extraction-spectrometric and spectrometric methods,Minerais et concentrés de manganèse — Dosage du cuivre — Méthodes spectrométriques avec et sans extraction,1984-12-01,2,['73.060.20'],ISO/TMBG,9599,"[10138,4265]",[1564],"['en','fr']",5,"<p>The extraction-spectrometric method (A) is applicable to products having copper contents up to 0,5 % (m/m), the spectrometric method (B) is applicable to products having copper contents from 0,1 to 1 % (m/m). Cancels and replaces the first edition (ISO 4294-1978), of which it constitutes a minor revision. ISO 4294 should be read in conjunction with ISO 4297.</p>" 1

10140,IS,,ISO 4295:1979,Manganese ores and concentrates — Determination of aluminium content — Photometric and gravimetric methods,Minerais et concentrés de manganèse — Dosage de l'aluminium — Méthodes photométrique et gravimétrique,1979-02-01,1,['73.060.20'],ISO/TC 65,9599,,[10141],"['en','fr']",6,

10145,IS,,ISO 4298:1978,Manganese ores and concentrates — Determination of manganese content — Potentiometric method,Minerais et concentrés de manganèse — Dosage du manganèse — Méthode potentiométrique,1978-08-01,1,['73.060.20'],ISO/TC 65,9599,,[10146],"['en','fr']",3,

10146,IS,,ISO 4298:1984,Manganese ores and concentrates — Determination of manganese content — Potentiometric method,Minerais et concentrés de manganèse — Dosage du manganèse — Méthode potentiométrique,1984-11-01,2,['73.060.20'],ISO/TC 132,9599,"[4262,10145]","[77080,75532]","['en','fr']",3,"<p>The method is applicable to the determination of a manganese content equal to or greater than 15 % (m/m). ISO 4298 should be read in conjunction with ISO 4297. Specifies principle, reactions, reagents, apparatus, sampling, procedure and expression of results.</p>"

10147,IS,,ISO 4299:1980,Manganese ores — Determination of moisture content,Minerais de manganèse — Détermination de l'humidité,1980-04-01,1,['73.060.20'],ISO/TC 65,9599,,[10148],"['en','fr']",7,

3675,IS,,ISO 43:1976,Aircraft — Jacking pads,Aéronefs — Points d'appui du vérin de levage,1976-07-01,1,['49.100'],ISO/TC 20/SC 9,9599,,[65980],"['en','fr']",4,"<p>Specifies the profiles and dimensions of main and axle jacking pads and the clear space to be provided around these pads. They are to be limited to the six designs shown in the figures 1 to 6, which specify the shape, size and clearances to be provided around the pads.</p>"

10151,IS,,ISO 4301-1:1986,Cranes and lifting appliances — Classification — Part 1: General,Grues et appareils de levage — Classification — Partie 1: Généralités,1986-06-26,2,['53.020.01'],ISO/TC 96/SC 10,9599,[10150],"[63070,2574]","['en','fr']",4,<p>Establishes a general classification of cranes based on the number of operating cycles to be carried out during the expected life of the crane and a load spectrum factor which represents a nominal state of loading. Classification considers only the operating conditions which are independent of the type of crane and the way it is driven.</p><p> </p><p>Additional information for the user:</p><p>This version uses the<span lang='EN-GB'> time - based

10150,IS,,ISO 4301:1980,Lifting appliances — Classification,Appareils de levage — Classification,1980-12-01,1,['53.020.20'],ISO/TC 96,9599,,[10151],"['en','fr']",4,

10152,IS,,ISO 4301-2:1985,Lifting appliances — Classification — Part 2: Mobile cranes,Appareils de levage — Classification — Partie 2: Grues mobiles,1985-08-15,1,['53.020.20'],ISO/TC 96/SC 6,9599,,[44187],"['en','fr']",2,<p>Establishes a classification of mobile cranes and related crane mechanisms based on the number of operating cycles to be carried out during the expected life and on a load spectrum factor which represents a nominal state of loading. Applies to basic types of self-propelled mobile cranes and their parts as defined in ISO 4306-2.</p>

44187,IS,,ISO 4301-2:2009,Cranes — Classification — Part 2: Mobile cranes,Appareils de levage à charge suspendue — Classification — Partie 2: Grues mobiles,2009-04-21,2,['53.020.20'],ISO/TC 96/SC 6,9599,[10152],[77004],"['en','fr']",2,"<p>ISO 4301-2:2009 establishes a system of classification for mobile cranes and related crane mechanisms, based on the number of operating cycles to be carried out during a crane's expected life, representing a nominal state of loading. It is applicable to the basic types of self-propelled mobile crane and their parts as defined in ISO 4306-2.</p>"

10153,IS,,ISO 4301-3:1993,Cranes — Classification — Part 3: Tower cranes,Appareils de levage à charge suspendue — Classification — Partie 3: Grues à tour,1993-12-09,1,['53.020.20'],ISO/TC 96/SC 7,9599,,"[60272,78737]","['en','fr']",3,"<p>Establishes a classification of tower cranes as defined in ISO 4306-3, according to their category (1: in irregular use or having a light state of loading, 2: for building, 3: in regular use or having a heavy state of loading). Applies to the classification of tower cranes for building and general construction work that can be dismantled, permanently erected tower cranes, hammerhead cranes, dockside and shipbuilders' tower cranes. Does not apply to the class

10154,IS,,ISO 4301-4:1989,Cranes and related equipment — Classification — Part 4: Jib cranes,Grues et équipements correspondants — Classification — Partie 4: Grues à flèche,1989-08-24,1,['53.020.20'],ISO/TC 96/SC 8,9599,,"[83830,76421]","['en','fr']",2,"<p>Establishes classifications for jib cranes, based on the number of operating cycles to be carried out during the expected life of the crane and a load spectrum factor which represents the nominal state of loading. Should be read in conjunction with ISO 4306-1.</p>"

10155,IS,,ISO 4301-5:1991,Cranes — Classification — Part 5: Overhead travelling and portal bridge cranes,Appareils de levage à charge suspendue — Classification — Partie 5: Ponts roulants et ponts portiques,1991-09-12,1,['53.020.20'],ISO/TC 96/SC 9,9599,,[85885],"['en','fr']",2,"<p>Establishes the classification of cranes based on the number of operating cycles to be carried out during the expected life of the appliance and its mechanisms, and a load spectrum factor which represents the nominal state of loading.</p>"

10156,IS,,ISO 4302:1981,Cranes — Wind load assessment,Appareils de levage à charge suspendue - Evaluation des charges dues au vent,1981-05-01,1,['53.020.20'],ISO/TC 96/SC 10,9599,,[62566],"['en','fr']",6,"<p>Gives a simplified method of calculation and assumes that the wind blows horizontal from any direction, that the wind blows at a constant velocity and that there is a static reaction to the loadings applying to the crane structure. Includes built-in allowances for the effects of gusting (rapid changes in wind velocity) and for dynamic response.</p>"

10159,IS,,ISO 4305:1981,Mobile cranes — Determination of stability,Grues mobiles — Détermination de la stabilité,1981-05-01,1,['53.020.20'],ISO/TC 96,9599,,[10160],['en'],4,

10160,IS,,ISO 4305:1991,Mobile cranes — Determination of stability,Grues mobiles — Détermination de la stabilité,1991-05-09,2,['53.020.20'],ISO/TC 96/SC 6,9599,[10159],[57220],"['en','fr']",5,

10161,IS,,ISO 4306-1:1985,Lifting appliances — Vocabulary — Part 1: General,Appareils de levage — Vocabulaire — Partie 1: Généralités,1985-05-30,2,"['53.020.20','01.040.53']",ISO/TC 96/SC 2,9599,,[10162],"['en','fr','ru']",,

10163,IS,Add,ISO 4306-1:1985/Add 1:1988,Lifting appliances — Vocabulary — Part 1: General — Addendum 1,Appareils de levage — Vocabulaire — Partie 1: Généralités — Additif 1,1988-01-21,2,"['53.020.20','01.040.53']",ISO/TC 96/SC 2,9599,,[10162],,,

10162,IS,,ISO 4306-1:1990,Cranes — Vocabulary — Part 1: General,Appareils de levage à charge suspendue — Vocabulaire — Partie 1: Généralités,1990-03-15,3,"['53.020.20','01.040.53']",ISO/TC 96/SC 2,9599,"[10161,10163]","[32457,20733]","['en','fr','ru']",53,"<p>Defines terms concerning the main types of cranes, parameters, general concepts and component parts in English, French and Russian.</p>"

32457,IS,,ISO 4306-1:2007,Cranes — Vocabulary — Part 1: General,Appareils de levage à charge suspendue — Vocabulaire — Partie 1: Généralités,2007-10-22,4,"['53.020.20','01.040.53']",ISO/TC 96/SC 2,9599,[10162],[78820],"['en','fr','ru']",98,"<p>ISO 4306 establishes a vocabulary of the most commonly used terms in the field of cranes. ISO 4306-1:2007 defines terms concerning the main crane types and classifications, parameters, general concepts and component parts.</p>"

10164,IS,,ISO 4306-2:1983,Lifting appliances — Vocabulary — Part 2: Parameters,Appareils de levage — Vocabulaire — Partie 2: Paramètres,1983-09-01,1,"['53.020.20','01.040.53']",ISO/TC 96/SC 2,9599,,[10165],"['en','fr','ru']",11,

10165,IS,,ISO 4306-2:1985,Lifting appliances — Vocabulary — Part 2: Mobile cranes,Appareils de levage — Vocabulaire — Partie 2: Grues mobiles,1985-05-16,2,"['53.020.20','01.040.53']",ISO/TC 96/SC 6,9599,[10164],[10166],"['en','fr','ru']",7,

10166,IS,,ISO 4306-2:1994,Cranes — Vocabulary — Part 2: Mobile cranes,Appareils de levage à charge suspendue — Vocabulaire — Partie 2: Grues mobiles,1994-10-13,3,"['53.020.20','01.040.53']",ISO/TC 96/SC 6,9599,[10165],[55962],"['en','fr','ru']",14,"<p>Establishes a vocabulary in English, French and Russian of the most commonly used terms in the field of cranes, lifting appliances and related equipment. Defines the terms relating to the basic types of self-powered mobile cranes. Excavators and other construction machines as described in ISO 6165 are excluded.</p>"

10167,IS,,ISO 4306-3:1983,Lifting appliances — Vocabulary — Part 3: General concepts,Appareils de levage — Vocabulaire — Partie 3: Généralités,1983-07-01,1,"['53.020.20','01.040.53']",ISO/TC 96/SC 2,9599,,[10168],"['en','fr','ru']",4,

10168,IS,,ISO 4306-3:1991,Cranes — Vocabulary — Part 3: Tower cranes,Appareils de levage à charge suspendue — Vocabulaire — Partie 3: Grues à tour,1991-02-14,2,"['53.020.20','01.040.53']",ISO/TC 96/SC 7,9599,[10167],[26130],"['en','fr','ru']",19,"<p>Establishes a vocabulary in English, French and Russian of the most commonly used terms in the field of cranes. This part gives the general definition of a tower crane. It applies to tower cranes for construction work that can be assembled and dismantled, permanently erected tower cranes, hammerhead cranes, dockside and shipbuilders'tower cranes. It does not apply to mobile boom cranes which may be fitted with a tower attachment and erection mast

26130,IS,,ISO 4306-3:2003,Cranes — Vocabulary — Part 3: Tower cranes,Appareils de levage à charge suspendue — Vocabulaire — Partie 3: Grues à tour,2003-11-27,3,"['53.020.20','01.040.53']",ISO/TC 96/SC 7,9599,[10168],[64709],"['en','fr','ru']",18,"<p>ISO 4306 establishes definitions in English, French and Russian for the most commonly used terms in the field of cranes.</p><p>ISO 4306-3:2002 gives the general definition of a tower crane and illustrates the terminology used with each type of tower crane by the use of figures with referenced term numbers.</p><p>It is applicable to </p><ul><li> tower cranes that can be assembled and dismantled;</li><li> permanently erected tower cranes;</li></ul>

55490,IS,Amd,ISO 4306-3:2003/Amd 1:2011,Cranes — Vocabulary — Part 3: Tower cranes — Amendment 1,Appareils de levage à charge suspendue — Vocabulaire — Partie 3: Grues à tour — Amendement 1,2011-12-02,3,"['53.020.20','01.040.53']",ISO/TC 96/SC 7,9599,,[64709],"['en','fr']",3,

10172,IS,,ISO 4308-1:1986,Cranes and lifting appliances — Selection of wire ropes — Part 1: General,Grues et appareils de levage — Choix des câbles — Partie 1: Généralités,1986-05-15,2,['53.020.30'],ISO/TC 96/SC 3,9599,[10171],"[37643,23383]","['en','fr']",5,"<p>Specifies two methods for the selection of wire rope to be used on the types of lifting appliances designated in ISO 4306-1, and which are listed in Annex A. Establishes minimum requirements for acceptable strength and performance levels with respect to design, application and maintenance of the appliance. One method is based on the value of rope selection factor C, and the other on the value of the coefficient of utilization Zp.</p>

37643,IS,,ISO 4308-1:2003,Cranes and lifting appliances — Selection of wire ropes — Part 1: General,Grues et appareils de levage — Choix des câbles — Partie 1: Généralités,2003-05-09,3,['53.020.30'],ISO/TC 96/SC 3,9599,[10172],"[46337,57301]","['en','fr']",22,"<p>ISO 4308-1:2003 specifies two methods for the selection of wire rope to be used on lifting appliances as designated in ISO 4306-1, one based on the value of the rope selection factor <i>C</i> and the other based on the value of the coefficient of utilization <i>Z</i>_p ISO 4308-1:2003 establishes the minimum requirements for acceptable strength and performance levels of wire ropes with respect to the design, application a

10171,IS,,ISO 4308:1981,Cranes — Selection of wire ropes,Appareils de levage — Choix des câbles,1981-11-01,1,['53.020.20'],ISO/TC 96,9599,,"[10172,10173]","['en','fr']",6,

10173,IS,,ISO 4308-2:1988,Cranes and lifting appliances — Selection of wire ropes — Part 2: Mobile cranes — Coefficient of utilization,Grues et appareils de levage — Choix des câbles — Partie 2: Grues mobiles — Coefficient d'utilisation,1988-06-23,1,['53.020.30'],ISO/TC 96/SC 6,9599,[10171],"[45925,57301]","['en','fr']",2,<p>Establishes the values of the minimum practical coefficients of utilization for ropes and rotation-resistant ropes used on mobile cranes. Applies to all mobile cranes as defined in ISO 4306-2.</p>

10174,IS,,ISO 4309:1981,Wire rope for lifting appliances — Code of practice for examination and discard,Câble pour appareils de levage — Critères d'examen et de dépose des câbles,1981-12-01,1,['53.020.20'],ISO/TC 96,9599,,[10175],"['en','fr']",26,

10175,IS,,ISO 4309:1990,Cranes — Wire ropes — Code of practice for examination and discard,Appareils de levage à charge suspendue — Câbles — Critères d'examen et de dépose,1990-08-23,2,['53.020.30'],ISO/TC 96/SC 3,9599,[10174],"[35095,23384]","['en','fr']",25,"<p>Details the essential guidelines for examination of wire ropes in service on a lifting appliance and enumerates discard criteria relating to wire breaks, wear, corrosion and deformation which are to be applied to ensure the efficient and safe usage of the equipment.</p>"

35095,IS,,ISO 4309:2004,"Cranes — Wire ropes — Care, maintenance, installation, examination and discard","Appareils de levage à charge suspendue — Câbles — Entretien, maintenance, installation, examen et dépose",2004-07-30,3,['53.020.30'],ISO/TC 96/SC 3,9599,[10175],[43597],"['en','fr']",40,"<p>ISO 4309:2004 details guidelines for the care, installation, maintenance and examination of wire rope in service on a crane, and enumerates the discard criteria to be applied to promote the safe use of the crane.</p><p>ISO 4309:2004 is applicable to the following types of crane, as defined in ISO 4306-1:</p><p>cable and portal cable cranes;</p><p>cantilever cranes (pillar jib, wall or walking);</p><p

43598,IS,Amd,ISO 4309:2004/Amd 1:2008,"Cranes — Wire ropes — Care, maintenance, installation, examination and discard — Amendment 1","Appareils de levage à charge suspendue — Câbles — Entretien, maintenance, installation, examen et dépose — Amendement 1",2008-02-05,3,['53.020.30'],ISO/TC 96/SC 3,9599,,[43597],"['en','fr']",2,

43597,IS,,ISO 4309:2010,"Cranes — Wire ropes — Care and maintenance, inspection and discard","Appareils de levage à charge suspendue — Câbles — Entretien et maintenance, inspection et dépose",2010-07-27,4,['53.020.30'],ISO/TC 96/SC 3,9599,"[35095,43598]",[66759],"['en','fr']",53,"<p>ISO 4309:2010 establishes general principles for the care and maintenance, and inspection and discard of steel wire ropes used on cranes and hoists. </p><p>It is applicable to those ropes used on the following types of cranes, the majority of which are defined in ISO 4306‑1: cable and portal cable cranes; cantilever cranes (pillar jib, wall or walking); deck cranes; derrick and guy derrick cranes; derrick cranes

10176,IS,,ISO 4310:1981,Cranes — Test code and procedures,Appareils de levage — Code et méthodes d'essai,1981-05-01,1,['53.020.20'],ISO/TC 96/SC 4,9599,,"[44279,37000]","['en','fr']",4,"<p>Specifies the tests and procedures to be followed in order to verify that a crane conforms to its operational specifications and is capable of lifting rated loads. Where rated loads are determined by stability, a test procedure and test load are specified that permit stability margins to be easily verified. Defines test procedures such as conformity tests, visual inspection and load lifting competence testing.</p>"

10179,IS,,ISO 4312:1979,Surface active agents — Evaluation of certain effects of laundering — Methods of analysis and test for unsoiled cotton control cloth,Agents de surface — Contrôle de certains effets de blanchissage — Méthodes d'analyse et d'essai d'un tissu de coton témoin non souillé,1979-02-01,1,['71.100.40'],ISO/TC 91,9599,,[10180],"['en','fr']",25,

10186,IS,,ISO 4317:1977,Surface active agents — Determination of water content — Karl Fischer method,Agents de surface — Détermination de la teneur en eau — Méthode de Karl Fischer,1977-08-01,1,['71.100.40'],ISO/TC 91,9599,,[10187],"['en','fr']",3,

10187,IS,,ISO 4317:1991,Surface-active agents and detergents — Determination of water content — Karl Fischer method,Agents de surface et détergents — Détermination de la teneur en eau — Méthode de Karl Fischer,1991-08-08,2,['71.100.40'],ISO/TC 91,9599,[10186],"[28258,55762]","['en','fr']",6,"<p>Specifies a method using Karl Fischer reagent for the determination. The method is applicable to products in the form of powders, pastes, and solutions. This second edition cancels and replaces the first edition (1977). Annexes A and B are for information only.</p>"

10188,IS,,ISO 4318:1978,Surface active agents and soaps — Determination of water content — Azeotropic distillation method,Agents de surface et savons — Détermination de la teneur en eau — Méthode par entraînement azéotropique,1978-02-01,1,['71.100.40'],ISO/TC 91,9599,,[10189],"['en','fr']",2,

4443,IS,,ISO 432:1975,Ply type conveyor belts — Characteristics of construction,Courroies transporteuses à plis superposés — Caractéristiques de construction,1975-05-01,1,['53.040.20'],ISO/TC 41,9599,,[4444],"['en','fr']",2,

10195,IS,,ISO 4323:1977,Soaps — Determination of chlorides content — Potentiometric method,Savons — Dosage des chlorures — Méthode potentiométrique,1977-09-01,1,['71.100.40'],ISO/TC 91,9599,,[69740],"['en','fr']",3,"<p>The method is carried out as follows: Potentiometric titration of the chloride ions with standard volumetric silver nitrate solution in a nitric acid medium, using a silver-silver chloride measurement electrode and a calomel reference electrode.</p>"

69740,IS,,ISO 4323:2018,Soaps — Determination of chloride content — Potentiometric method,Savons — Dosage des chlorures — Méthode potentiométrique,2018-12-07,2,['71.100.40'],ISO/TC 91,9599,[10195],[89628],['en'],6,"<p>This document specifies a potentiometric method for the determination of the chloride content of soaps, containing or not containing other surface active agents, and also of compounded products.</p>"

10197,IS,,ISO 4325:1977,Soaps and detergents — Determination of EDTA content (sequestering agent) — Titrimetric method,Savons et détergents — Dosage de l'EDTA (agent séquestrant) — Méthode titrimétrique,1977-11-01,1,['71.100.40'],ISO/TC 91,9599,,[10198],"['en','fr']",2,

4446,IS,,ISO 433:1991,Conveyor belts — Marking,Courroies transporteuses — Marquage,1991-06-20,2,['53.040.20'],ISO/TC 41/SC 3,9599,,[73518],"['en','fr']",4,

41843,IS,Amd,ISO 433:1991/Amd 1:2006,Conveyor belts — Marking — Amendment 1,Courroies transporteuses — Marquage — Amendement 1,2006-01-19,2,['53.040.20'],ISO/TC 41/SC 3,9599,,[73518],"['en','fr']",1,

10204,IS,,ISO 4330:1979,Photography — Determination of the curl of photographic film,Photographie — Détermination de l'incurvation des films photographiques,1979-04-01,1,['37.040.20'],ISO/TC 42,9599,,"[20058,10205]","['en','fr']",7,

10205,IS,,ISO 4330:1987,Photography — Determination of the curl of photographic film,Photographie — Détermination de l'incurvation des films photographiques,1987-10-15,2,['37.040.20'],ISO/TC 42,9599,[10204],[20058],"['en','fr']",7,

20058,IS,,ISO 4330:1994,Photography — Determination of the curl of photographic film and paper,Photographie — Détermination de l'incurvation des films et papiers photographiques,1994-12-22,3,['37.040.20'],ISO/TC 42,9599,"[10204,10205]",[31934],['en'],8,

10206,IS,,ISO 4331:1977,Photography — Processed photographic film for archival records — Silver-gelatin type on cellulose ester base — Specifications,Photographie — Film photographique pour la conservation d'archives — Type gélatino- argentique sur support en ester de cellulose — Spécifications,1977-01-01,1,['37.040.20'],ISO/TC 42,9599,,[10207],"['en','fr']",9,

10207,IS,,ISO 4331:1986,Photography — Processed photographic black-and-white film for archival records — Silver-gelatin type on cellulose ester base — Specifications,Photographie — Film photographique noir et blanc traité pour la conservation d'archives — Type gélatino-argentique sur support en ester de cellulose — Spécifications,1986-09-25,2,['37.040.20'],ISO/TC 42,9599,"[7795,10206]",[18685],"['en','fr']",10,

10208,IS,,ISO 4332:1977,Photography — Processed photographic film for archival records — Silver-gelatin type on poly(ethylene terephthalate) base — Specifications,Photographie — Film photographique pour la conservation d'archives — Type gélatino- argentique sur support en polyéthylène téréphtalate — Spécifications,1977-01-01,1,['37.040.20'],ISO/TC 42,9599,,[10209],"['en','fr']",10,

10209,IS,,ISO 4332:1986,Photography — Processed photographic black-and-white film for archival records — Silver-gelatin type on poly(ethylene terephthalate) base — Specifications,Photographie — Film photographique noir et blanc traité pour la conservation d'archives — Type gélatino-argentique sur support en polyéthylène téréphtalate — Spécifications,1986-10-02,2,['37.040.20'],ISO/TC 42,9599,"[10208,7795]",[18685],"['en','fr']",11,

53459,IS,,ISO 4335:1979,Information processing systems — Data communication — High-level data link control elements of procedures,Systèmes de traitement de l'information — Communication de données — Eléments de procédures de commandes de liaison de données à haut niveau,1979-04-15,1,,ISO/IEC JTC 1/SC 6,9599,,[53460],"['en','fr']",28,

10212,IS,Add,ISO 4335:1979/Add 1:1979,Information processing systems — Data communication — High-level data link control elements of procedures — Addendum 1,Systèmes de traitement de l'information — Communication de données — Eléments de procédures de commandes de liaison de données à haut niveau — Additif 1,1979-12-01,1,['35.100.20'],ISO/IEC JTC 1/SC 6,9599,,[53460],['en'],5,

10213,IS,Add,ISO 4335:1979/Add 2:1982,Information processing systems — Data communication — High-level data link control elements of procedures — Addendum 2,Systèmes de traitement de l'information — Communication de données — Eléments de procédures de commandes de liaison de données à haut niveau — Additif 2,1982-02-01,1,['35.100.20'],ISO/IEC JTC 1/SC 6,9599,,[53460],['en'],9,

53460,IS,,ISO 4335:1984,Information processing systems — Data communication — High-level data link control elements of procedures,Systèmes de traitement de l'information — Communication de données — Eléments de procédures de commandes de liaison de données à haut niveau,1984-12-15,2,,ISO/IEC JTC 1/SC 6,9599,"[53459,10212,10213]",[10210],"['en','fr']",42,

10210,IS,,ISO 4335:1987,Information processing systems — Data communication — High-level data link control elements of procedures,Systèmes de traitement de l'information — Communication de données — Eléments de procédures de commandes de liaison de données à haut niveau,1987-07-30,3,['35.100.20'],ISO/IEC JTC 1/SC 6,9599,[53460],[10211],['fr'],,

10216,IS,Amd,ISO 4335:1987/Amd 4:1991,Information processing systems — Data communication — High-level data link control elements of procedures — Amendment 4,Systèmes de traitement de l'information — Communication de données — Eléments de procédures de commandes de liaison de données à haut niveau — Amendement 4,1991-10-03,3,['35.100.20'],ISO/IEC JTC 1/SC 6,9599,,[10211],['en'],3,

10221,IS,,ISO 4343:1978,Numerical control of machines — NC processor output — Minor elements of 2000- type records (Post-processor commands),Commande numérique des machines — Informations de sortie des processeurs CN — Éléments mineurs des enregistrements de type 2000 (Instruction post-processeur),1978-04-01,1,['25.040.20'],ISO/TC 184/SC 1,9599,,"[2537,33799]","['en','fr']",92,

10222,IS,,ISO 4344:1983,Steel wire ropes for lifts,Câbles en acier pour ascenseurs,1983-12-01,1,"['77.140.65','91.140.90']",ISO/TC 105,9599,,[31563],"['en','fr']",4,"<p>Specifies the characteristics of steel wire ropes used for suspension purposes with passenger-carrying lifts or goods lifts, moving between vertical guides or guides inclined to an angle not exceeding 15 of the vertical. Not included are builder's hoists, and other hoists not running between permanent guides. Describes constructions, diameters and tensile strengths.</p>"

31563,IS,,ISO 4344:2004,Steel wire ropes for lifts — Minimum requirements,Câbles en acier pour ascenseurs — Exigences minimales,2004-01-19,2,"['77.140.65','91.140.90']",ISO/TC 105,9599,[10222],[79195],"['en','fr']",28,"<p>ISO 4344:2004 specifies the minimum requirements for the manufacture and testing of stranded carbon steel wire ropes used for suspension duty on traction drive and roped hydraulic lifts and for compensation and governor duties on passenger and freight lifts, dumbwaiters, personnel hoists and man lifts moving between guides. It gives the minimum breaking forces for the more common sizes, rope grades and rope classes and constructions. It is applicable to ropes made from brig

10223,IS,,ISO 4345:1977,Steel wire ropes — Fibre main cores — Specifications,Câbles en acier — Âmes centrales en textile — Spécifications,1977-08-01,1,['77.140.65'],ISO/TC 105,9599,,[10224],"['en','fr']",5,

10224,IS,,ISO 4345:1988,Steel wire ropes — Fibre main cores — Specification,Câbles en acier — Âmes centrales en textile — Spécifications,1988-06-16,2,['77.140.65'],ISO/TC 105,9599,[10223],[84904],"['en','fr']",5,"<p>This second edition cancels and replaces the first edition (ISO 4345:1977), of which it constitutes a technical revision. Specifies the construction and characteristics using natural and man-made fibres. Is not applicable to ropes for mine hoisting purposes. Includes five annexes.</p>"

10226,IS,,ISO 4347:1977,"Leaf chains, clevises and sheaves","Chaînes de levage à mailles jointives, chapes et tourteaux de renvoi",1977-09-01,1,['21.220.30'],ISO/TC 100,9599,,"[10227,10228]","['en','fr']",12,

10227,IS,,ISO 4347:1985,"Leaf chains, clevises and sheaves","Chaînes de levage à mailles jointives, chapes et tourteaux de renvoi",1985-11-21,2,['21.220.30'],ISO/TC 100,9599,[10226],[10228],"['en','fr']",13,

10228,IS,,ISO 4347:1992,"Leaf chains, clevises and sheaves","Chaînes de levage à mailles jointives, chapes et galets de renvoi",1992-08-12,3,['21.220.30'],ISO/TC 100,9599,"[10226,10227]",[35932],"['en','fr']",15,"<p>Specifies characteristics of chains used for general lifting purposes, together with the rim profiles of sheaves and the chain attachment ends of clevises. Covers dimensions (in mm), limits for interchangeability (not the actual tolerances), length measurement, proof testing and minimum tensile strengths. Annex A gives the original inch/lb values.</p>"

35932,IS,,ISO 4347:2004,"Leaf chains, clevises and sheaves — Dimensions, measuring forces and tensile strengths","Chaînes de levage à mailles jointives, chapes et galets de renvoi — Dimensions, forces de mesurage et résistances à la traction",2004-02-11,4,['21.220.30'],ISO/TC 100,9599,[10228],[50823],"['en','fr']",14,"<p>ISO 4347:2004 specifies the characteristics of chains used for general lifting purposes, together with the rim profiles of sheaves and the chain attachment ends of clevises. It gives dimensions, limits for interchangeability, length measurement, preloading and minimum tensile strengths. It is not applicable to 8 x 8 lacing. </p>"

4448,IS,,ISO 435:1975,Documentary reproduction — ISO conventional typographical character for legibility tests (ISO character),Reproduction documentaire — Caractère typographique conventionnel ISO pour essais de lisibilité (caractère ISO),1975-10-01,1,['37.080'],ISO/TC 171,9599,,[4465],"['en','fr']",3,

10231,IS,,ISO 4354:1997,Wind actions on structures,Actions du vent sur les structures,1997-06-26,1,['91.080.01'],ISO/TC 98/SC 3,9599,,[38882],"['en','fr']",46,

10232,IS,,ISO 4355:1981,Bases for design of structures — Determination of snow loads on roofs,Bases du calcul des constructions — Détermination de la charge de neige sur les toitures,1981-09-01,1,['91.080.01'],ISO/TC 98,9599,,[20965],"['en','fr']",18,

20965,IS,,ISO 4355:1998,Bases for design of structures — Determination of snow loads on roofs,Bases du calcul des constructions — Détermination de la charge de neige sur les toitures,1998-12-10,2,['91.080.01'],ISO/TC 98/SC 3,9599,[10232],[56059],"['en','fr']",31,

10233,IS,,ISO 4356:1977,Bases for the design of structures — Deformations of buildings at the serviceability limit states,Bases du calcul des constructions — Déformations des bâtiments à l'état limite d'utilisation,1977-11-01,1,['91.080.01'],ISO/TC 98/SC 2,9599,,[70805],"['en','fr']",18,"<p>Establishes the basic principles that should be adopted when setting up national standards, regulations and recommendations for the deformation of buildings at the limit states of serviceability. Refers to the deformations at the serviceability limit states of buildings such as dwellings, offices, public buildings, and factories. Does not refer to the deformations of bridges, roads, masts, underground wor

10235,IS,,ISO 4359:1983,"Liquid flow measurement in open channels — Rectangular, trapezoidal and U-shaped flumes","Mesure de débit des liquides dans les canaux découverts — Canaux jaugeurs à col rectangulaire, à col trapézoïdal et à col en U",1983-07-01,1,['17.120.20'],ISO/TC 113/SC 2,9599,,[51417],"['en','fr']",51,"<p>Deals with the measurement of flow in rivers and artificial channels under steady or slowly varying flow conditions, using certain types of standing-wave (or critical depth) flumes. An annex gives the guidelines for the selection of weirs and flumes for the measurement of the discharge of water in open channels.</p>"

32890,IS,Cor,ISO 4359:1983/Cor 1:1999,"Liquid flow measurement in open channels — Rectangular, trapezoidal and U-shaped flumes — Technical Corrigendum 1","Mesure de débit des liquides dans les canaux découverts — Canaux jaugeurs à col rectangulaire, à col trapézoïdal et à col en U — Rectificatif technique 1",1999-10-21,1,['17.120.20'],ISO/TC 113/SC 2,9599,,[51417],"['en','fr']",1,

51417,IS,,ISO 4359:2013,"Flow measurement structures — Rectangular, trapezoidal and U-shaped flumes","Structures de mesure du débit — Canaux jaugeurs à col rectangulaire, à col trapézoïdal et à col en U",2013-02-08,2,['17.120.20'],ISO/TC 113/SC 2,9599,"[32890,10235]",[81722],['en'],75,"<p>ISO 4359:2013 specifies methods for the measurement of flow in rivers and artificial channels under steady or slowly varying flow conditions, using certain types of standing-wave, or critical-depth, flumes.</p><p>A wide variety of flumes has been developed, but only those which have received general acceptance after adequate research and field testing, and which therefore do not require in situ calibration,

71169,IS,Amd,ISO 4359:2013/Amd 1:2017,"Flow measurement structures — Rectangular, trapezoidal and U-shaped flumes — Amendment 1","Structures de mesure du débit — Canaux jaugeurs à col rectangulaire, à col trapézoïdal et à col en U — Amendement 1",2017-06-16,2,['17.120.20'],ISO/TC 113/SC 2,9599,,[81722],['en'],2,

10236,IS,,ISO 4360:1979,Liquid flow measurement in open channels by weirs and flumes — Triangular profile weirs,Mesure de débit des liquides dans les canaux découverts au moyen de déversoirs et de canaux jaugeurs — Déversoirs à profil triangulaire,1979-04-01,1,['17.120.20'],ISO/TC 113/SC 2,9599,,[10237],"['en','fr']",9,

10237,IS,,ISO 4360:1984,Liquid flow measurement in open channels by weirs and flumes — Triangular profile weirs,Mesure de débit des liquides dans les canaux découverts au moyen de déversoirs et de canaux jaugeurs — Déversoirs à profil triangulaire,1984-12-01,2,['17.120.20'],ISO/TC 113/SC 2,9599,[10236],[40932],"['en','fr']",13,<p>Specifies methods for the measurement of the flow of water in open channels under steady flow conditions using triangular profile weirs. The flow conditions considered are steady flows which are uniquely dependent on the upstream head and drowned flows which depend on downstream as well as upstream levels.</p>

40932,IS,,ISO 4360:2008,Hydrometry — Open channel flow measurement using triangular profile weirs,Hydrométrie — Mesure de débit des liquides dans les canaux découverts au moyen de déversoirs à profil triangulaire,2008-02-18,3,['17.120.20'],ISO/TC 113/SC 2,9599,[10237],[70915],['en'],28,<p>ISO 4360:2008 specifies methods for the measurement of the flow of water in open channels under steady flow conditions using triangular profile weirs. The flow conditions considered are steady flows which are uniquely dependent on the upstream head and drowned flows which depend on downstream as well as upstream levels.</p>

10238,IS,,ISO 4362:1992,Measurement of liquid flow in open channels — Trapezoidal profile weirs,Mesure de débit des liquides dans les canaux découverts — Déversoirs à profil trapézoïdal,1992-09-17,1,['17.120.20'],ISO/TC 113/SC 2,9599,,[26323],"['en','fr']",16,

10239,IS,,ISO 4363:1977,Liquid flow measurement in open channels — Methods for measurement of suspended sediment,Mesure de débit des liquides dans les canaux découverts — Méthodes de mesurage des sédiments en suspension,1977-12-01,1,['17.120.20'],ISO/TC 113,9599,,[10240],"['en','fr']",6,

10240,IS,,ISO 4363:1993,Measurement of liquid flow in open channels — Methods for measurement of suspended sediment,Mesure de débit des liquides dans les canaux découverts — Méthodes de mesurage des sédiments en suspension,1993-11-18,2,['17.120.20'],ISO/TC 113/SC 6,9599,[10239],[31797],"['en','fr']",7,"<p>Specifies methods for detailed measurement of sediment concentration and also methods for routine sampling. Because sediment load is highly variable with stage and is also highly variable at the same stage in different floods, and because the bulk of sediment is carried in flood periods, accurate computation of total sediment flow in a period entails routine sampling at normal flows combine

10241,IS,,ISO 4364:1977,Liquid flow measurement in open channels — Bed material sampling,Mesure de débit des liquides dans les canaux découverts — Échantillonnage des matériaux du lit,1977-12-01,1,['17.120.20'],ISO/TC 113,9599,,[10242],"['en','fr']",13,

10243,IS,,ISO 4365:1985,"Liquid flow in open channels — Sediment in streams and canals — Determination of concentration, particle size distribution and relative density","Mesure de débit des liquides dans les canaux découverts — Sédiments dans les cours d'eau et les canaux — Détermination de la concentration, la distribution des particules et la densité relative",1985-03-14,1,['17.120.20'],ISO/TC 113/SC 6,9599,,[36315],"['en','fr']",30,"<p>In problems of sedimentation and sediment transport, a knowledge of the concentration and the characteristics of the sediment, such as particle size distribution and relative density, is of great importance. For this purpose, sediment samples are collected

10244,IS,,ISO 4366:1979,Echo sounders for water depth measurements,Mesure de la profondeur de l'eau — Sondeurs à écho,1979-10-01,1,['17.120.20'],ISO/TC 113/SC 5,9599,,[37097],"['en','fr']",6,"<p>Provides information concerning the principle of operation, performance and selection criteria for echo sounders used in depth measurements for open channel flow (and related) measurements. The use of standard terminology is promoted. Information on the characteristics of sound in water is provided in annex.</p>"

4450,IS,,ISO 437:1982,Steel and cast iron — Determination of total carbon content — Combustion gravimetric method,Aciers et fontes — Dosage du carbone total — Méthode gravimétrique après combustion,1982-11-01,1,['77.080.01'],ISO/TC 17/SC 1,9599,,[63800],"['en','fr']",4,"<p>Specifies a gravimetric method after combustion of the test portion in a current of oxygen. The method is applicable to products having carbon contents not less than 0,1 % (m/m) of results and test report. Gives principle, reagents, apparatus, sampling, procedure, expression of results and test report.</p>"

10247,IS,,ISO 4371:1984,Measurement of liquid flow in open channels by weirs and flumes — End depth method for estimation of flow in non-rectangular channels with a free overfall (approximate method),Mesure de débit des liquides dans les canaux découverts au moyen de déversoirs et de canaux jaugeurs — Méthode d'évaluation du débit par détermination de la profondeur en bout des chenaux non rectangulaires à déversement dénoyé (méthode approximative),1984-12-01,1,['17.120.20'],ISO/TC 113/SC 2,9599,,[62561],"['en','fr']",11,"<p>Specifies a method for the estimation of subcritical flow of clear water in smooth, essentially horizontal, straight open channels with a vertical drop and discharging fr

10249,IS,,ISO 4373:1979,Measurement of liquid flow in open channels — Water level measuring devices,Mesure de débit des liquides dans les canaux découverts — Appareils de mesure du niveau de l'eau,1979-09-01,1,['17.120.20'],ISO/TC 113/SC 5,9599,,[2097],"['en','fr']",18,

2097,IS,,ISO 4373:1995,Measurement of liquid flow in open channels — Water-level measuring devices,Mesure de débit des liquides dans les chenaux — Appareils de mesure du niveau de l'eau,1995-10-19,2,['17.120.20'],ISO/TC 113/SC 5,9599,[10249],[39381],"['en','fr']",23,"<p>Specifies the functional requirements and operational procedures for stage detecting, encoding and recording devices for measuring water levels in open channels. Replaces the first edition, which has been technically revised.</p>"

39381,IS,,ISO 4373:2008,Hydrometry — Water level measuring devices,Hydrométrie — Appareils de mesure du niveau de l'eau,2008-10-07,3,['17.120.20'],ISO/TC 113/SC 5,9599,[2097],[77443],"['en','fr']",20,"<p>ISO 4373:2008 specifies the functional requirements of instrumentation for measuring the level of water surface (stage), primarily for the purpose of determining flow rates. An informative annex provides guidance on the types of water level measurement devices currently available and the measurement uncertainty associated with them.</p>"

10250,IS,,ISO 4374:1982,Liquid flow measurement in open channels — Round-nose horizontal crest weirs,Mesure de débit des liquides dans les canaux découverts — Déversoirs horizontaux à seuil arrondi,1982-12-01,1,['17.120.20'],ISO/TC 113/SC 2,9599,,[10251],"['en','fr']",17,